| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Liste des publications de "Tahan, Antoine"Nombre de documents archivés : 219. 2024
Bechara, Helene, Zemouri, Ryad, Kedjar, Bachir, Merkhouf, Arezki, Al-Haddad, Kamal et Tahan, Antoine.
2024.
« Non-invasive detection of rotor inter-turn short circuit in large hydrogenerators by using stray flux measurement combined with convolutional variational autoencoder analysis (CVAE) ».
IEEE Transactions on Industry Applications, vol. 60, nº 1.
pp. 196-205.
Benabdesselam, Abderraouf, Dollon, Quentin, Zemouri, Ryad, Pelletier, Francis, Gagnon, Martin et Tahan, Antoine.
2024.
« On the use of indirect measurements in virtual sensors for renewable energies: A review ».
Electronics, vol. 13, nº 8.
Chahdoura, Sabrine, Bahloul, Riadh, Tlija, Mehdi et Tahan, Antoine.
2024.
« Multi-objective optimization of PLA-FDM parameters for enhancement of industrial product mechanical performance based on GRA-RSM and BBD ».
Progress in Additive Manufacturing.
Chrétien, Antoine, Tahan, Antoine et Pelletier, Francis.
2024.
« Impact of wind turbine nominal power limitation over wind turbine blade remaining useful life and its economic consequences ».
Wind Engineering.
Chrétien, Antoine, Tahan, Antoine et Pelletier, Francis.
2024.
« Wind turbine blade damage evaluation under multiple operating conditions and based on 10-min SCADA data ».
Energies, vol. 17, nº 5.
Heddar, Mohamed Imad Eddine, Mehdi, Brahim, Matougui, Nedjoua, Tahan, Souheil Antoine et Jahazi, Mohammad.
2024.
« Adaptable multi-objective optimization framework: Application to metal additive manufacturing ».
International Journal of Advanced Manufacturing Technology, vol. 132, nº 3-4.
pp. 1897-1914.
Ibrahim, Rony, Zemouri, Ryad, Kedjar, Bachir, Merkhouf, Arezki, Tahan, Antoine, Al-Haddad, Kamal et Lafleur, François.
2024.
« Non-invasive detection of rotor inter-turn short circuit of a hydrogenerator using AI-based variational autoencoder ».
IEEE Transactions on Industry Applications, vol. 60, nº 1.
pp. 28-37.
Ibrahim, Rony, Zemouri, Ryad, Tahan, Antoine, Kedjar, Bachir, Merkhouf, Arezki et Al-Haddad, Kamal.
2024.
« Fault detection based on vibration measurements and variational autoencoder-desirability function ».
IEEE Open Journal of Industry Applications, vol. 5.
pp. 106-116.
Jose, Sagar, Nguyen, Khanh T. P., Medjaher, Kamal, Zemouri, Ryad, Lévesque, Mélanie et Tahan, Antoine.
2024.
« Advancing multimodal diagnostics: Integrating industrial textual data and domain knowledge with large language models ».
Expert Systems with Applications, vol. 255, nº Part D.
Jose, Sagar, Nguyen, Khanh T. P., Medjaher, Kamal, Zemouri, Ryad, Lévesque, Mélanie et Tahan, Antoine.
2024.
« Bridging expert knowledge and sensor measurements for machine fault quantification with large language models ».
In IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (Boston, MA, USA, July 15-19, 2024)
pp. 530-535.
Institute of Electrical and Electronics Engineers Inc..
Morin, Nicolas, Dollon, Quentin, Antoni, Jérôme, Tahan, Antoine, Monette, Christine et Gagnon, Martin.
2024.
« Harmonic modal analysis of hydroelectric runner in steady-state conditions: a Bayesian approach ».
Mechanics and Industry, vol. 25.
Oliveira-Filho, Adaiton, Zemouri, Ryad, Pelletier, Francis et Tahan, Antoine.
2024.
« System condition monitoring based on a standardized latent space and the nataf transform ».
IEEE Access, vol. 12.
pp. 32637-32659.
Sadeghifar, Morteza, Billardon, Rene, Delagnes, Denis, Champliaud, Henri, Tahan, Antoine et Jahazi, Mohammad.
2024.
« A novel approach for accurate development of the incremental plastic multiplier and consistent tangent operator in thermo-elasto-plastic modeling of materials ».
Mechanics of Materials, vol. 199.
Salazar, Gamaliel, Lemyre-Baron, Jean-Sebastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine.
2024.
« Identification of thermal boundary conditions during industrial quenching (air transfer + mineralized oil immersion) of a hollow cylinder ».
In 29th International Federation for Heat Treatment and Surface Engineering World Congress, IFHTSE (Cleveland, OH, USA, Sept. 30-Oct. 03, 2024)
pp. 152-159.
ASM International. 2023
Bechara, Helene, Merkhouf, Arezki, Zemouri, Ryad, Kedjar, Bachir, Al Haddad, Kamal et Tahan, Antoine.
2023.
« Field winding short circuit fault signature analysis in stray flux of large hydrogenerator ».
In 6th International Conference on Renewable Energy for Developing Countries (REDEC) (Zouk Mosbeh, Lebanon, July 05-07, 2023)
pp. 78-83.
Institute of Electrical and Electronics Engineers.
Ben Amor, Sabrine, Zongo, Floriane, Eltaief, Ameni, Maatki, Aymen, Louhichi, Borhen et Tahan, Antoine.
2023.
« A new method to select optimal part building orientation for additive manufacturing processes based on geometric complexity and heat shrinkage ».
Progress in Additive Manufacturing, vol. 8, nº 2.
pp. 211-222.
Bounaouara, Wafa, Rivest, Louis et Tahan, Antoine.
2023.
« Combining large-scale 3D metrology and mixed reality for assembly quality control in modular construction ».
In CONVR2023 Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality : Managing the Digital Transformation of Construction Industry (Florence, Italy, Nov. 13-16, 2023)
pp. 1171-1180.
Firenze University Press.
Chrétien, Antoine, Tahan, Antoine, Cambron, Philippe et Oliveira-Filho, Adaiton.
2023.
« Operational wind turbine blade damage evaluation based on 10-min SCADA and 1 Hz Data ».
Energies, vol. 16, nº 7.
Dollon, Q., Tahan, A., Antoni, J., Gagnon, M. et Monette, C..
2023.
« Toward a better understanding of synchronous vibrations in hydroelectric turbines ».
Journal of Sound and Vibration, vol. 544.
Drouin, Marc-Antoine et Tahan, Antoine.
2023.
« 3D imaging systems for optical metrology ».
In
Handbook of metrology and applications.
pp. 1293-1318. Springer Nature.
Ibrahim, Rony, Tahan, Antoine, Kedjar, Bachir, Al-Haddad, Kamal, Zemouri, Ryad et Merkhouf, Arezki.
2023.
« Vibroacoustic signal-based diagnosis for rotor faults in large synchronous machines - an overview ».
In 6th International Conference on Renewable Energy for Developing Countries (REDEC) (Zouk Mosbeh, Lebanon, July 05-07, 2023)
pp. 72-77.
IEEE.
Ibrahim, Rony, Zemouri, Ryad, Kedjar, Bachir, Tahan, Antoine, Merkhouf, Arezki et Al-Haddad, Kamal.
2023.
« Rotor fault diagnosis in a hydrogenerator based on the stator vibration and the variational autoencoder ».
In IEEE International Electric Machines and Drives Conference, IEMDC (San Francisco, CA, USA, May 15-18, 2023)
Institute of Electrical and Electronics Engineers.
Jose, Sagar, Nguyen, Khanh T. P., Medjaher, Kamal, Zemouri, Ryad, Lévesque, Mélanie et Tahan, Antoine.
2023.
« Fault detection and diagnostics in the context of sparse multimodal data and expert knowledge assistance: Application to hydrogenerators ».
Computers in Industry, vol. 151.
Jose, Sagar, Zemouri, Ryad, Levesque, Melanie, Nguyen, Khanh T. P., Tahan, Antoine et Medjaher, Kamal.
2023.
« Informed machine learning for image-data-driven diagnostics of hydrogenerators ».
[Article de conférence]. IFAC-PapersOnLine, vol. 56, nº 2.
pp. 11912-11917.
Oliveira-Filho, Adaiton, Zemouri, Ryad, Cambron, Philippe et Tahan, Antoine.
2023.
« Early detection and diagnosis of wind turbine abnormal conditions using an interpretable supervised variational autoencoder model ».
Energies, vol. 16, nº 12.
Proteau, Antoine, Tahan, Antoine, Zemouri, Ryad et Thomas, Marc.
2023.
« Predicting the quality of a machined workpiece with a variational autoencoder approach ».
Journal of Intelligent Manufacturing, vol. 34, nº 2.
pp. 719-737.
Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine.
2023.
« Analysis of industrial quenching (air transfer + oil immersion) and the cooling regimes after immersion ».
In Heat Treat 2023: Proceedings of the 32nd ASM Heat Treating Society Conference (Detroit, MI, USA, Oct. 17-19, 2023)
pp. 106-113.
ASM International.
Tlija, M., Korbi, A., Louhichi, B. et Tahan, A..
2023.
« A computer-aided design-based tolerance analysis of assemblies with form defects and deformations of nonrigid parts ».
Journal of Computing and Information Science in Engineering, vol. 23, nº 2.
Zemouri, Ryad, Ibrahim, Rony et Tahan, Antoine.
2023.
« Hydrogenerator early fault detection: Sparse Dictionary Learning jointly with the Variational Autoencoder ».
Engineering Applications of Artificial Intelligence, vol. 120.
2022
Amor, Sabrine Ben, Zongo, Floriane, Louhichi, Borhen, Tahan, Antoine et Brailovski, Vladimir.
2022.
« Dimensional deviation prediction model based on scale and material concentration effects for LPBF process ».
In 1st International Additive Manufacturing Conference, IAM (Lisbon, Portugal, Oct. 19-20, 2022)
American Society of Mechanical Engineers.
Bechara, H., Zemouri, R., Tahan, A., Kedjar, B., Merkhouf, A. et Al-haddad, K..
2022.
« Non-invasive anomaly diagnosis for hydro electrical generators rotor inter-turn short-circuit detection using stray flux and the VAE ».
In International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022)
pp. 1855-1861.
Piscataway, NJ, USA : IEEE.
Ben Amor, Sabrine, Tahan, Antoine et Louhichi, Borhen.
2022.
« The impact of geometric complexity on printing time and cost for additive manufacturing (AM) process ».
In Advances in Mechanical Engineering and Mechanics II : Selected Papers from the 5th Tunisian Congress on Mechanics, CoTuMe (En ligne, Mar. 22-24, 2021)
Coll. « Lecture Notes in Mechanical Engineering »
pp. 203-210.
Springer Science and Business Media Deutschland GmbH.
de Oliveira-Filho, Adaiton Moreira, Cambron, Philippe et Tahan, Antoine.
2022.
« Condition monitoring of wind turbine main bearing using SCADA data and informed by the principle of energy conservation ».
In Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022)
pp. 276-282.
IEEE.
Dollon, Quentin, Antoni, Jérôme, Tahan, Antoine, Gagnon, Martin et Monette, Christine.
2022.
« A fast collapsed Gibbs sampler for frequency domain operational modal analysis ».
Mechanical Systems and Signal Processing, vol. 173.
Ibrahim, R., Zemouri, R., Tahan, A., Lafleur, F., Kedjar, B., Merkhouf, A. et Al-haddad, K..
2022.
« Anomaly detection for large hydrogenerators using the variational autoencoder based on vibration signals ».
In International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022)
pp. 1609-1615.
Piscataway, NJ, USA : IEEE.
Montlahuc, J., Polette, A., Tahan, A., Pernot, J. P. et Rivest, L..
2022.
« Multi-source point cloud semantic segmentation using neural network ».
In 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission III (Nice, France, June 06-11, 2022)
Coll. « International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences », vol. XLIII-B3-2022.
pp. 515-522.
International Society for Photogrammetry and Remote Sensing.
Nassar, M., Guizani, L., Nollet, M. J. et Tahan, A..
2022.
« Seismic reliability assessment of base-isolated bridges in Quebec ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 49, nº 2.
pp. 242-254.
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2022.
« Effects of temperature, analysis and modelling uncertainties on the reliability of base-isolated bridges in Eastern Canada ».
Structures, vol. 37.
pp. 295-304.
Pham, Quang Hung, Antoni, Jérôme, Tahan, Antoine, Gagnon, Martin et Monette, Christine.
2022.
« Simulation of non-Gaussian stochastic processes with prescribed rainflow cycle count using short-time Fourier transform ».
Probabilistic Engineering Mechanics, vol. 68.
Pham, Quang Hung, Gagnon, Martin, Antoni, Jérôme, Tahan, Antoine et Monette, Christine.
2022.
« Prediction of hydroelectric turbine runner strain signal via cyclostationary decomposition and kriging interpolation ».
Renewable Energy, vol. 182.
pp. 998-1011.
Proteau, Antoine, Zemouri, Ryad, Tahan, Antoine, Thomas, Marc, Bounouara, Wafa et Agnard, Stéphane.
2022.
« CNC machining quality prediction using variational autoencoder: A novel industrial 2 TB dataset ».
In Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022)
pp. 360-367.
Piscataway, NJ, USA : IEEE. 2021
Amor, Sabrine Ben, Zongo, Floriane, Louhichi, Borhen, Brailovski, Vladimir et Tahan, Antoine.
2021.
« Classification of dimensional deviation in additive manufacturing LPBF process for AlSi10Mg alloy according to ISO 286 and ANSI B4.2 ».
In 41st Computers and Information in Engineering Conference, CIE 2021, Held as Part of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021 (En ligne, Aug. 17-19, 2021)
American Society of Mechanical Engineers (ASME).
Chatenet, Q., Remy, E., Gagnon, M., Fouladirad, M. et Tahan, A. S..
2021.
« Modeling cavitation erosion using non-homogeneous gamma process ».
Reliability Engineering and System Safety, vol. 213.
Chatenet, Quentin, Tahan, Antoine S., Fouladirad, Mitra, Gagnon, Martin et Remy, Emmanuel.
2021.
« Maintenance strategies comparison for francis turbine runner subjected to cavitation ».
Sustainability, vol. 13, nº 19.
Danouj, B., Tahan, S. A., David, E. et Lotfi, M..
2021.
« Partial discharges location in power transformers using piezoceramic sensors ».
International Journal of Electrical and Computer Engineering, vol. 11, nº 3.
pp. 1942-1950.
Dollon, Q., Antoni, J., Tahan, A., Gagnon, M. et Monette, C..
2021.
« Operational Modal Analysis of hydroelectric turbines using an order based likelihood approach ».
Renewable Energy, vol. 165.
pp. 799-811.
Dollon, Q., Monette, C., Gagnon, M., Tahan, A. et Antoni, J..
2021.
« Calibration of critical speed predictions using experimental measurements ».
In 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 774.
UK : IOP Publishing.
Pham, Quang Hung, Gagnon, Martin, Antoni, Jérôme, Tahan, Antoine et Monette, Christine.
2021.
« Rainflow-counting matrix interpolation over different operating conditions for hydroelectric turbine fatigue assessment ».
Renewable Energy, vol. 172.
pp. 465-476.
Quang Hung, Pham, Gagnon, Martin, Antoni, Jérôme, Tahan, Antoine et Monette, Christine.
2021.
« A proposal for the dynamic strain interpolation on hydroelectric turbine runner ».
In 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 774.
UK : IOP Publishing.
Souilah, Mondher, Tahan, Antoine et Abacha, Nabil.
2021.
« A small displacement torsor model to evaluate machining accuracy in the presence of locating and machine geometric errors ».
In Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021 (Charlottetown, PE, Canada, June 27-30, 2021)
Coll. « Progress in Canadian Mechanical Engineering », vol. 4.
2020
Aidibe, Ali, Tahan, Souheil Antoine et Nejad, Mojtaba Kamali.
2020.
« Interlaboratory empirical reproducibility study based on a GD&T benchmark ».
Applied Sciences, vol. 10, nº 14.
Babanezhad, Kaveh, Aidibe, Ali, Foucault, Gilles, Tahan, Antoine et Bigeon, Jean.
2020.
« Improved Bi-Criterion flexible registration for fixtureless inspection of compliant parts ».
Precision Engineering, vol. 65.
pp. 116-129.
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2020.
« Reproducibility investigation of elicitation techniques in risk assessment for hydraulic turbines ».
Journal of Risk Research, vol. 23, nº 3.
pp. 297-312.
Blancke, Olivier, Komljenovic, Dragan, Tahan, Antoine, Amyot, Normand, Hudon, Claude, Boudreau, Jean-François et Lévesque, Mélanie.
2020.
« From data to asset health management in the context of hydropower generation: A holistic concept ».
In Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018)
pp. 258-266.
Cham, Switzerland : Springer International Publishing.
Chatenet, Quentin, Fouladirad, Mitra, Remy, Emmanuel, Gagnon, Martin, Tôn-Thât, Laurent et Tahan, Antoine.
2020.
« On the performance of the maximum likelihood estimation method for gamma process ».
In 29th European Safety and Reliability Conference (ESREL) (Hannover, Germany, Sept. 22-26, 2019)
pp. 943-950.
Research Publishing Services.
Chatenet, Quentin, Gagnon, Martin, Remy, Emmanuel, Fouladirad, Mitra et Tahan, Antoine.
2020.
« Stochastic modeling of cavitation erosion in francis runner ».
International Journal of Fluid Machinery and Systems, vol. 13, nº 1.
pp. 21-29.
Kahwati, G., Tahan, A., Merkhouf, A., Hudon, C. et Al-Haddad, K..
2020.
« Reliability index for health monitoring of hydroelectric synchronous machine's insulation ».
In 2020 International Conference on Electrical Machines (Gothenburg, Sweden, Aug. 23-26, 2020)
pp. 1418-1423.
New York : IEEE.
Lamothe, Thibaud, Blain, Michel, Gagnon, Martin, Lonchampt, Jérôme et Tahan, Antoine.
2020.
« Technico-economic modelling of maintenance cost for hydroelectric turbine runners ».
In Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018)
pp. 238-245.
Cham, Switzerland : Springer International Publishing.
Proteau, Antoine, Zemouri, Ryad, Tahan, Antoine et Thomas, Marc.
2020.
« Dimension reduction and 2D-visualization for early change of state detection in a machining process with a variational autoencoder approach ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 11-12.
pp. 3597-3611.
Zemouri, Ryad, Levesque, Melanie, Amyot, Normand, Hudon, Claude, Kokoko, Olivier et Tahan, Souheil Antoine.
2020.
« Deep convolutional variational autoencoder as a 2D-visualization tool for partial discharge source classification in hydrogenerators ».
IEEE Access, vol. 8.
pp. 5438-5454.
Zongo, Floriane, Simoneau, Charles, Timercan, Anatolie, Tahan, Antoine et Brailovski, Vladimir.
2020.
« Geometric deviations of laser powder bedfused AlSi10Mg components: numerical predictions versus experimental measurements ».
International Journal of Advanced Manufacturing Technology, vol. 107.
pp. 1411-1436. 2019
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2019.
« Tool condition monitoring method in milling process using wavelet transform and long short-term memory ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 153-161.
INSA.
Babanezhad, Kaveh, Foucault, Gilles, Sabri, Vahid, Tahan, Antoine et Bigeon, Jean.
2019.
« The fixtureless inspection of flexible parts based on semi-geodesic distance ».
Precision Engineering, vol. 59.
pp. 174-184.
Ben Amor, Sabrine, Abdellaoui, Salah, Tahan, Antoine, Louhichi, Borhen et Tavares, João Manuel R. S..
2019.
« Choosing the best direction of printing for additive manufacturing process in medical applications using a new geometric complexity model based on part CAD data ».
In VipIMAGE : Proceedings of the VII ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (Porto, Portugal, Oct. 16-18, 2019)
Coll. « Lecture Notes in Computational Vision and Biomechanics », vol. 34.
pp. 679-692.
Springer Netherlands.
BEN Amor, Sabrine, Tahan, Antoine et Louhichi, Borhen.
2019.
« Proposition of a geometric complexity model for additive manufacturing process based on CAD ».
In 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019)
pp. 442-448.
Los Alamitos, CA, USA : IEEE Computer Society.
Blancke, Olivier, Combette, Amélie, Amyot, Normand, Komljenovic, Dragan, Lévesque, Mélanie, Hudon, Claude, Tahan, Antoine et Zerhouni, Noureddine.
2019.
« A predictive maintenance approach for complex equipment based on a failure mechanism propagation model ».
International Journal of Prognostics and Health Management, vol. 10, nº 1.
Chatenet, Q., Gagnon, M., Tôn-Thât, L., Fouladirad, M., Remy, E. et Tahan, A. S..
2019.
« Stochastic modelling of cavitation erosion in Francis runner ».
In 29th IAHR Symposium on Hydraulic Machinery and Systems (Kyoto, Japan, Sept. 17-21, 2018)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 240.
UK : IOP Publishing.
Dollon, Quentin, Tahan, Antoine, Antoni, Jérôme, Gagnon, Martin et Monette, Christine.
2019.
« Dynamic characterization of hydroelectric turbine with transient data records using OBMA and phase-shift analysis ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 343-355.
INSA.
Haj Ibrahim, Marwa, Aidibe, Ali, Mahjoub, Mohamed Ali, Tahan, Antoine et Louhichi, Borhen.
2019.
« A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology ».
International Journal of Advanced Manufacturing Technology, vol. 103, nº 1-4.
pp. 409-422.
Jbira, Ibtissem, Ben Makhlouf, Aicha, Louhich, Borhen, Tahan, Antoine, Mahjoub, Mohamed Ali et Deneux, Dominique.
2019.
« A comparative study of extraction cylinder features in industrial point clouds ».
In 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019)
pp. 431-441.
Los Alamitos, CA, USA : IEEE Computer Society.
Jbira, Ibtissem, Tahan, Antoine, Bonsaint, Serge, Mahjoub, Mohamed Ali et Louhichi, Borhen.
2019.
« Reproducibility experimentation among computer-aided inspection software from a single point cloud ».
Journal of Control Science and Engineering, vol. 2019.
Montlahuc, Jérémy, Rivest, Louis, Pernot, Jean-Philippe, Tahan, Antoine et Polette, Arnaud. 2019. « Vers une utilisation conjointe de données multi-sources pour la génération et le traitement de nuages de points multicouches de parcelles et d’ouvrages existants : constats et premiers éléments d’analyse ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019).
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2019.
« A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions ».
Engineering Structures, vol. 197.
Pham, Q. H., Gagnon, M., Tahan, A. et Monette, C..
2019.
« Interpolation of periodic hidden signal measured at steady-operating conditions on hydroelectric turbine runners ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 28-39.
INSA.
Proteau, Antoine, Tahan, Antoine et Thomas, Marc.
2019.
« Specific cutting energy: a physical measurement for representing tool wear ».
International Journal of Advanced Manufacturing Technology, vol. 103, nº 1-4.
pp. 101-110.
Proteau, Antoine, Thomas, Marc et Tahan, Antoine.
2019.
« Toward the quality prognostic of an aircraft engine workpiece in Inconel Alloy 625: case study and proposed system architecture ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 546-560.
INSA. Thieulin, Valentin, Rivest, Louis et Tahan, Antoine. 2019. « Investigation des performances in situ de la numérisation d’une tuyauterie industrielle par photogrammétrie et lumière structurée ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019).
Zongo, Floriane, Tahan, Antoine et Brailovski, Vladimir.
2019.
« Scale, material concentration, stress relief and part removal effects on the dimensional behaviour of selected AlSi10Mg components manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 2.
2018
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2018.
« Tool condition monitoring using spectral subtraction algorithm and artificial intelligence methods in milling process ».
International Journal of Mechanical Engineering and Robotics Research, vol. 7, nº 1.
pp. 30-34.
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2018.
« Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 9-12.
pp. 3217-3227.
Aidibe, A., Tahan, A. et Brailovski, V..
2018.
« A novel industrial test artifact for the evaluation of dimensional capabilities of metallic additive manufacturing systems ».
In Proceedings of the European Powder Metallurgy Association (EPMA) : Euro PM2018 (Bilbao, Spain, Oct. 14-18, 2018)
European Powder Metallurgy Association (EPMA).
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2018.
« A comparison between aggregation before and after propagation based on a reliability model ».
Information Sciences, vol. 453.
pp. 99-110.
Blancke, Olivier, Combette, Amélie, Amyot, Normand, Komljenovic, Dragan, Lévesque, Mélanie, Hudon, Claude, Tahan, Antoine et Zerhouni, Noureddine.
2018.
« A predictive maintenance approach for complex equipment based on petri net failure mechanism propagation model ».
Proceedings of the European Conference of the PHM Society, vol. 4, nº 1.
Blancke, Olivier, Tahan, Antoine, Komljenovic, Dragan, Amyot, Normand, Lévesque, Mélanie et Hudon, Claude.
2018.
« A holistic multi-failure mode prognosis approach for complex equipment ».
Reliability Engineering and System Safety, vol. 180.
pp. 136-151.
Cambron, P., Masson, C., Tahan, A. et Pelletier, F..
2018.
« Control chart monitoring of wind turbine generators using the statistical inertia of a wind farm average ».
Renewable Energy, vol. 116, nº B.
pp. 88-98.
Filion, Alexandre, Joubair, Ahmed, Tahan, Antoine S. et Bonev, Ilian A..
2018.
« Robot calibration using a portable photogrammetry system ».
Robotics and Computer-Integrated Manufacturing, vol. 49.
pp. 1339-1351.
Habibzadeh Boukani, Hamid, Viens, Martin, Tahan, Souheil-Antoine et Gagnon, Martin.
2018.
« Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 5-8.
pp. 2201-2211.
Jbira, Ibtissem, Tahan, Antoine, Mahjoub, Mohammed Ali et Louhichi, Borhen.
2018.
« Evaluation of the algorithmic error of new specification tools for an ISO 14405-1:2016 size ».
In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Québec, QC, Canada, Aug. 26-29, 2018)
Nassar, M., Guizani, L., Nollet, M. -J. et Tahan, A..
2018.
« Approche probabiliste pour évaluer la fiabilité des ponts isolés à la base, sous l’effet simultané des séismes et de la température en régions froides ».
In 25e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art (Montréal, QC, Canada, 8-9 mai 2018)
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2018.
« A probabilistic approach to assess seismic base-isolated bridges reliability in cold climate ».
In 11th National Conference on Earthquake Engineering 2018: Integrating Science, Engineering, and Policy (NCEE) (Los Angeles, CA, USA, June 25-29, 2018)
pp. 2773-2777.
Earthquake Engineering Research Institute.
Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, François, Vincent et Tahan, Souheil-Antoine.
2018.
« “What-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads ».
International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4.
pp. 353-373.
Zongo, Floriane, Tahan, Antoine, Aidibe, Ali et Brailovski, Vladimir.
2018.
« Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
2017
Aidibe, Ali, Nejad, Mojtaba Kamali, Tahan, Antoine, Jahazi, Mohammad et Cloutier, Sylvain G..
2017.
« Surface characterization of die inserts used for LED lamp plastic lenses ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 3395-3403.
Cambron, Philippe, Masson, Christian, Tahan, Antoine, Torres, David et Pelletier, Francis.
2017.
« Comparison of power curve monitoring methods ».
In International Conference on Advances in Energy Systems and Environmental Engineering (ASEE 2017) (Wroclaw, Poland, July 02-05, 2017)
Coll. « E3S Web of Conferences », vol. 22.
EDP Sciences.
Cambron, Philippe, Tahan, Antoine, Masson, Christian et Pelletier, Francis.
2017.
« Bearing temperature monitoring of a Wind Turbine using physics-based model ».
Journal of Quality in Maintenance Engineering, vol. 23, nº 4.
pp. 479-488.
Jbira, I., Tlija, M., Louhichi, B. et Tahan, A..
2017.
« CAD/Tolerancing integration: Mechanical assembly with form defects ».
Advances in Engineering Software, vol. 114.
pp. 312-324.
Karganroudi, Sasan Sattarpanah, Cuillière, Jean-Christophe, François, Vincent et Tahan, Antoine Souheil.
2017.
« Assessment of the robustness of a fixtureless inspection method for non-rigid parts based on a verification and validation approach ».
Journal of Verification, Validation and Uncertainty Quantification, vol. 2, nº 4.
Poirier, Marc, Gagnon, Martin, Tahan, Antoine, Coutu, André et Chamberland-lauzon, Joël.
2017.
« Extrapolation of dynamic load behaviour on hydroelectric turbine blades with cyclostationary modelling ».
Mechanical Systems and Signal Processing, vol. 82.
pp. 193-205.
Sabri, V., Sattarpanah, S., Tahan, S. A., Cuillière, J. C., François, V. et Pham, X. T..
2017.
« A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 5-8.
pp. 2411-2423.
Touazine, Heithem, Akab, Jordan, Jahazi, Mohammad, Tahan, Antoine, Jomaa, Walid et Bocher, Philippe.
2017.
« Modeling of the microstructure alteration induced by hard turning of Inconel 718 ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 9-12.
pp. 3705-3712. 2016
Aghazadeh, Fatemeh, Thomas, M. et Tahan, A..
2016.
« Effect of varying cutting parameters on the accuracy of tool wear monitoring in milling process ».
In CMVA Conference : Covering the Spectrum: From Fundamentals to Future Trends (Toronto, ON, Canada, Oct. 26-28, 2016)
Aidibe, Ali, Nejad, Mojtaba Kamali, Tahan, Antoine, Jahazi, Mohammad et Cloutier, Sylvain G..
2016.
« A proposition for new quality 3D indexes to measure surface roughness ».
In 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016)
Coll. « Procedia CIRP », vol. 46.
pp. 327-330.
Elsevier.
Aidibe, Ali, Tahan, Antoine et Brailovski, Vladimir.
2016.
« Metrological investigation of a selective laser melting additive manufacturing system: A case study ».
[Article de conférence]. IFAC-PapersOnLine, vol. 49, nº 31.
pp. 25-29.
Babanezhad, Kaveh, Foucault, Gilles, Tahan, Antoine et Bigeon, Jean.
2016.
« A bi-criterion flexible registration method for fixtureless inspection of compliant parts ».
In 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016)
Coll. « Procedia CIRP », vol. 46.
pp. 307-310.
Elsevier.
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2016.
« Imprecise probabilities in fatigue reliability assessment of hydraulic turbines ».
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, vol. 3, nº 1.
Berdal, M., Tahan, S-A. et Gagnon, M..
2016.
« Maintenance strategy in fatigue based on the Hasofer Lind reliability index ».
In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016)
MOSIM.
Blancke, Olivier, Tahan, Antoine, Komljenovic, Dragan, Amyot, Normand, Hudon, Claude et Lévesque, Melanie.
2016.
« A hydrogenerator model-based failure detection framework to support asset management ».
In 2016 IEEE International Conference on Prognostics and Health Management (ICPHM) (Ottawa, ON, Canada, June 20-22, 2016)
Piscataway, NJ, USA : IEEE.
Cambron, P., Lepvrier, R., Masson, C., Tahan, A. et Pelletier, F..
2016.
« Power curve monitoring using weighted moving average control charts ».
Renewable Energy, vol. 94.
pp. 126-135.
Chatenet, Q., Tahan, A., Gagnon, M. et Chamberland-Lauzon, J..
2016.
« Numerical model validation using experimental data: Application of the area metric on a Francis runner ».
In 28th IAHR symposium on Hydraulic Machinery and Systems (IAHR2016) (Grenoble, France, July 4-8, 2016)
Coll. « IOP Conference Series : Earth and Environmental Science », vol. 49.
IOP Publishing.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2016.
« Bayesian network as an adaptive parameter setting approach for genetic algorithms ».
Complex & Intelligent Systems, vol. 2, nº 1.
pp. 1-22.
Diagne, I., Gagnon, M. et Tahan, A..
2016.
« Modeling the dynamic behavior of turbine runner blades during transients using indirect measurements ».
In 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016) (Grenoble, France, July 04-08, 2016)
Coll. « IOP Conference Series : Earth and Environmental Science », vol. 49.
UK : IOP Publishing Ltd..
Jbira, I., Tlija, M., Louhichi, B. et Tahan, A..
2016.
« CAD/Tolerancing integration: mechanical system with geometric defects ».
In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016)
MOSIM.
Joubair, A., Tahan, A. S. et Bonev, I. A..
2016.
« Performances of observability indices for industrial robot calibration ».
In IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Daejeon, South Korea, Oct. 09-14, 2016)
pp. 2477-2484.
IEEE.
Karganroudi, Sasan Sattarpanah, Cuillière, Jean-Christophe, Francois, Vincent et Tahan, Souheil-Antoine.
2016.
« Automatic fixtureless inspection of non-rigid parts based on filtering registration points ».
International Journal of Advanced Manufacturing Technology, vol. 87, nº 1.
pp. 687-712.
Kedadouche, M., Thomas, M. et Tahan, A..
2016.
« A comparative study between empirical wavelet transforms and empirical mode decomposition methods: application to bearing defect diagnosis ».
Mechanical Systems and Signal Processing, vol. 81.
pp. 88-107.
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2016.
« Empirical mode decomposition combined with empirical wavelets for extracting bearing frequencies in a noisy environment and early detection of defects ».
In Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the Fourth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2014, Lyon, France December 15-17 (Lyon, France, Dec. 15-17, 2014)
Coll. « Applied Condition Monitoring », vol. 4.
pp. 151-165.
Springer International Publishing.
Lépine, Marc Jr. et Tahan, Antoine S..
2016.
« The relationship between geometrical complexity and process capability ».
Journal of Manufacturing Science and Engineering, vol. 138, nº 5.
Pelletier, Francis, Masson, Christian et Tahan, Antoine.
2016.
« Wind turbine power curve modelling using artificial neural network ».
Renewable Energy, vol. 89.
pp. 207-214.
Proteau, Antoine, Tahan, S.-Antoine, Maranzana, Roland et Lavoie, Pascal.
2016.
« Proposition d'un modèle d'estimation de la complexité géométrique d'un porduit usine basé sur la maquette 3D ».
In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016)
MOSIM.
Sabri, V., Tahan, S. A., Pham, X. T., Moreau, D. et Galibois, S..
2016.
« Fixtureless profile inspection of non-rigid parts using the numerical inspection fixture with improved definition of displacement boundary conditions ».
International Journal of Advanced Manufacturing Technology, vol. 82, nº 5-8.
pp. 1343-1352. Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, François, Vincent et Tahan, Souheil-Antoine. 2016. « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication lors de la conférence : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) (Montréal, QC, Canada, 4 mai 2016). 2015
Abenhaim, Gad N., Desrochers, Alain, Tahan, Antoine S. et Bigeon, Jean.
2015.
« A finite-element boundary condition setting method for the virtual mounting of compliant components ».
Journal of Computing and Information Science in Engineering, vol. 15, nº 4.
Abenhaim, Gad N., Desrochers, Alain, Tahan, S.-Antoine et Bigeon, Jean.
2015.
« A virtual fixture using a FE-based transformation model embedded into a constrained optimization for the dimensional inspection of nonrigid parts ».
Computer-Aided Design, vol. 62.
pp. 248-258.
Aidibe, Ali et Tahan, Antoine.
2015.
« The Coherent Point Drift algorithm adapted for fixtureless metrology of non-rigid parts ».
In 13th CIRP Conference on Computer Aided Tolerancing, CAT 2014, May 11, 2014 - May 14, 2014 (Hangzhou, China, May 11-14, 2014)
Coll. « Procedia CIRP », vol. 27.
pp. 84-89.
Elsevier.
Aidibe, Ali et Tahan, S.-Antoine.
2015.
« Adapting the coherent point drift algorithm to the fixtureless dimensional inspection of compliant parts ».
International Journal of Advanced Manufacturing Technology, vol. 79, nº 5.
pp. 831-841.
Arpin-Pont, Jérémy, Gagnon, Martin, Tahan, S.-Antoine, Coutu, André et Thibault, Denis.
2015.
« Methodology for estimating strain gauge measurement biases and uncertainties on isotropic materials ».
Journal of Strain Analysis for Engineering Design, vol. 50, nº 1.
pp. 40-50.
Blancke, Olivier, Amyot, Normand, Hudon, Claude, Lévesque, Mélanie et Tahan, Antoine.
2015.
« A new generic approach to convert FMEA in causal trees for the purpose of hydro-generator rotor failure mechanisms identification ».
In Annual Conference of the Prognostics and Health Management Society 2015 (Coronado, CA, USA, Oct. 18-24, 2015)
PHM Society.
Boukani, H. H., Chentouf, S. M., Viens, Martin, Tahan, S.-Antoine et Gagnon, M..
2015.
« The effect of martensitic stainless steel microstructure on the ultrasonic inspection of turbine runner joints ».
In AIP Conference Proceedings (Boise, ID, USA, July 20-25, 2014)
pp. 909-916.
USA : AIP - American Institute of Physics.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, R..
2015.
« Evaluation of genotypic diversity measurements exploited in real-coded representation ».
arXiv. 13 p.
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2015.
« A hybrid method combining Teager Kaiser energy operator, empirical mode decomposition and minimum entropy deconvolution for monitoring gears damages ».
Mechanics and Industry, vol. 16, nº 6.
Kedadouche, Mourad, Thomas, Marc, Tahan, Antoine et Guilbault, Raynald.
2015.
« Monitoring gears by vibration measurements: Lempel-Ziv complexity and approximate entropy as diagnostic tools ».
In 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014)
Coll. « MATEC Web of Conferences », vol. 20.
EDP Sciences.
Kedadouche, Mourad, Thomas, Marc, Tahan, Antoine et Guilbault, Raynald.
2015.
« Nonlinear parameters for monitoring gear: comparison between lempel-ziv, approximate entropy, and sample entropy complexity ».
Shock and Vibration, vol. 2015.
Khakpour, Hamed, Birglen, Lionel et Tahan, Souheil-Antoine.
2015.
« Analysis and optimization of a new differentially driven cable parallel robot ».
Journal of Mechanisms and Robotics, vol. 7, nº 3.
Khakpour, Hamed, Birglen, Lionel et Tahan, Souheil-Antoine.
2015.
« Uniform scanning path generation for abrasive waterjet polishing of free-form surfaces modeled by triangulated meshes ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 5.
pp. 1167-1176.
Louhichi, Borhen, Abenhaim, Gad N. et Tahan, Antoine S..
2015.
« CAD/CAE integration: updating the CAD model after a FEM analysis ».
International Journal of Advanced Manufacturing Technology, vol. 76, nº 1.
pp. 391-400.
Louhichi, Borhen, Tlija, Mehdi, Benamara, Abdelmajid et Tahan, Antoine.
2015.
« An algorithm for CAD tolerancing integration: Generation of assembly configurations according to dimensional and geometrical tolerances ».
Computer-Aided Design, vol. 62.
pp. 259-274.
Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, Francois, Vincent et Tahan, Souheil-Antoine.
2015.
« An improvement of fixtureless inspection for non-rigid parts based on filtering sample points ».
In 25th Canadian Congress of Applied Mechanics (London, ON, Canada, May 31 - June 4, 2015)
Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, Francois, Vincent et Tahan, Souheil-Antoine. 2015. « Inspection automatique de pièces flexibles sans gabarit de conformité ». Affiche présentée lors de la conférence : 22e édition du Concours d’affiches scientifiques de l'Université du Québec à Trois-Rivières (UQTR) (Trois-Rivières, QC, Canada, 25-26 mars 2015). 2014
Aidibe, Ali et Tahan, Antoine.
2014.
« The inspection of deformable bodies using curvature estimation and Thompson-Biweight test ».
International Journal of Advanced Manufacturing Technology, vol. 71, nº 9-12.
pp. 1733-1747.
Boukani, H. H., Viens, Martin, Tahan, S.-Antoine et Gagnon, M..
2014.
« On the performance of nondestructive testing methods in the hydroelectric turbine industry ».
In 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014) (Montreal, QC, Canada, Sept. 22-26, 2014)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 22.
IOP Publishing.
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2014.
« Influence of load spectrum assumptions on the expected reliability of hydroelectric turbines: A case study ».
Structural Safety, vol. 50.
pp. 1-8.
Kamguem, R., Tahan, S.-Antoine et Songmene, Victor.
2014.
« Surface roughness estimation of turned parts from optical image measurements and wavelet decomposition ».
International Journal of Materials Forming and Machining Processes, vol. 1, nº 1.
pp. 48-72.
Kedadouche, M., Thomas, M. et Tahan, A..
2014.
« Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ».
Mechanics and Industry, vol. 15, nº 6.
pp. 467-476.
Kedadouche, M., Thomas, Marc et Tahan, Antoine.
2014.
« Monitoring machines by using a hybrid method combining MED, EMD, and TKEO ».
Advances in Acoustics and Vibration, vol. 2014.
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2014.
« Empirical mode decomposition of acoustic emission for early detection of bearing defects ».
In Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013 (Ferrara, Italy
Coll. « Lecture Notes in Mechanical Engineering »
pp. 367-377.
Springer Berlin Heidelberg.
Khakpour, H., Birglen, L. et Tahan, S.-Antoine.
2014.
« Synthesis of differentially driven planar cable parallel manipulators ».
IEEE Transactions on Robotics, vol. 30, nº 3.
pp. 619-630.
Khakpour, H., Birglenl, L., Tahan, S.-Antoine et Paquet, F..
2014.
« Experimental study on abrasive waterjet polishing of hydraulic turbine blades ».
In 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014 (Montreal, QC, Canada, Sept. 22-26, 2014)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 22.
Institute of Physics Publishing.
Radvar-Esfahlan, Hassan et Tahan, S.-Antoine.
2014.
« Robust generalized numerical inspection fixture for the metrology of compliant mechanical parts ».
International Journal of Advanced Manufacturing Technology, vol. 70, nº 5-8.
pp. 1101-1112. 2013
Abenhaim, G. N., Desrochers, A. et Tahan, Antoine S..
2013.
« An Investigation of the Repeatability of Nonrigid Parts Measurements: A Case Study of an Aluminum Panel ».
In 12th CIRP Conference on Computer Aided Tolerancing, Apr. 18-19, 2012)
Coll. « Procedia CIRP », vol. 10.
pp. 105-111.
Abenhaim, Gad N., Tahan, S. Antoine, Desrochers, Alain et Lalonde, Jean-Francois.
2013.
« Aerospace panels fixtureless inspection methods with restraining force requirements; A technology review ».
In SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013)
Coll. « SAE Technical Papers »
Warrendale, PA, USA : SAE International.
Aidibe, Ali et Tahan, Antoine.
2013.
« Curvature estimation for metrology of non-rigid parts ».
In ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013)
New York, N.Y., USA : American Society of Mechanical Engineers.
Aidibe, Ali, Tahan, S. Antoine et Lalonde, Jean-Francois.
2013.
« A robust iterative displacement inspection algorithm for quality control of aerospace non-rigid parts without conformation jig ».
In SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013)
Coll. « SAE Technical Papers »
Warrendale, PA, USA : SAE International.
Aidibe, Ali et Tahan, S.-Antoine.
2013.
« An inspection approach for nonrigid mechanical parts ».
In Manufacturing Science and Technology (ICMST2013) (Dubai, United Arab Emirates, Aug. 3-4, 2013)
Coll. « Advanced Materials Research », vol. 816-817.
pp. 806-811.
Zurich-Durnten, Switzerland : Trans Tech Publications Ltd.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2013.
« Review of phenotypic diversity formulations for diagnostic tool ».
Applied Soft Computing, vol. 13, nº 1.
pp. 9-26.
Danouj, B., Tahan, S.-Antoine et David, Éric.
2013.
« Using a new generation of piezoelectric sensors for partial discharge detection ».
Measurement: Journal of the International Measurement Confederation, vol. 46, nº 1.
pp. 660-666.
Gagnon, M., Tahan, Antoine, Bocher, Philippe et Thibault, D..
2013.
« On the fatigue reliability of hydroelectric Francis runners ».
In 5th International Conference on Fatigue Design, Fatigue Design 2013 (Senlis, France, Nov. 27-28, 2013)
Coll. « Procedia Engineering », vol. 66.
pp. 565-574.
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2013.
« A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner ».
International Journal of Fatigue, vol. 47.
pp. 300-307.
Kamguem, Rene, Tahan, Souheil Antoine et Songmene, Victor.
2013.
« Evaluation of machined part surface roughness using image texture gradient factor ».
International Journal of Precision Engineering and Manufacturing, vol. 14, nº 2.
pp. 183-190.
Kedadouche, Mourad, Kidar, Thameur, Thomas, Marc, Tahan, Antoine, El Badaoui, Mohamed et Guilbault, Raynald.
2013.
« Combining EMD and Lempel-Ziv complexity for early detection of gear cracks ».
In Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013)
Chartres, France : Institute of Technology.
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2013.
« Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ».
In CIRI 2013, 3ème Congrès International sur l’Ingénierie des Risques Industriels (Reims, France, July 3-5, 2013)
Reims, France : Université de Reims Champagne-Ardenne.
Radvar-Esfahlan, H. et Tahan, S.-Antoine.
2013.
« Performance study of dimensionality reduction methods for metrology of nonrigid mechanical parts ».
International Journal of Metrology and Quality Engineering, vol. 4, nº 3.
pp. 193-200.
Sabri, V., Tahan, S.-Antoine, Pham, X. T., Radvar-Esfahlan, H., Louhichi, B. et Tahvilian, A. M..
2013.
« Fixtureless profile inspection of non-rigid parts ».
In Proceedings of International Conference on Computers and Industrial Engineering, CIE (Hong Kong, China, Oct. 16-18, 2013)
pp. 86-97.
Curran Associates Inc.. 2012
Abenhaim, Gad Noriel, Desrochers, Alain et Tahan, Antoine.
2012.
« Nonrigid parts' specification and inspection methods: notions, challenges, and recent advancements ».
International Journal of Advanced Manufacturing Technology, vol. 63, nº 5-8.
pp. 741-752.
Aidibe, Ali, Tahan, Antoine S. et Abenhaim, Gad N..
2012.
« Distinguishing profile deviations from a part's deformation using the maximum normed residual test ».
WSEAS Transactions on Applied and Theoretical Mechanics, vol. 7, nº 1.
pp. 18-28.
Arpin-Pont, J., Gagnon, M., Tahan, Antoine, Coutu, A. et Thibault, D..
2012.
« Strain gauge measurement uncertainties on hydraulic turbine runner blade ».
In 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 15.
UK : IOP Publishing Ltd..
Chatelain, Jean-François, Lalonde, Jean-François et Tahan, Antoine S..
2012.
« Effect of Residual Stresses Embedded within Workpieces on the Distortion of Parts after Machining ».
International Journal of Mechanics, vol. 6, nº 1.
pp. 43-51.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2012.
« Review and study of genotypic diversity measures for real-coded representations ».
IEEE Transactions on Evolutionary Computation, vol. 16, nº 5.
pp. 695-710.
Gagnon, M., Tahan, Antoine, Bocher, Philippe et Thibault, D..
2012.
« The role of high cycle fatigue (HCF) onset in Francis runner reliability ».
In 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 15.
UK : IOP Publishing Ltd..
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2012.
« On the stochastic simulation of hydroelectric turbine blades transient response ».
Mechanical Systems and Signal Processing, vol. 32.
pp. 178-187. Kamguem, R., Wenga, B., Tahan, Antoine et Songmene, V.. 2012. « Non-contact optical inspection of machined parts surface roughness ». Communication lors de la conférence : International Conference on Virtual Machining Process Technology (VMPT) (Montreal, QC, Canada, May 28-June 1, 2012).
Kamguem, René, Songmene, Victor, Kenné, Jean-Pierre et Tahan, Souheil Antoine.
2012.
« Vision-based surface roughness inspection of machined aluminium parts ».
International Journal of Machining and Machinability of Materials, vol. 12, nº 3.
pp. 215-235.
Kamguem, René, Tahan, Antoine, Wenga, Bernard et Songmene, Victor.
2012.
« Non-contact Optical inspection of machined parts Surface Roughness ».
In 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, Canada, 28 mai au 1er juin 2012)
Kedadouche, M., Thomas, Marc et Tahan, Antoine.
2012.
« Monitoring bearings by acoustic emission: a comparative study with vibration techniques for early detection ».
In 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012)
The Canadian Machinery Vibration Association.
Poirier, M., Tahan, Antoine, Gagnon, M. et Coutu, A..
2012.
« Extrapolation des signaux de chargement mesurés sur des aubes de turbine hydroélectrique de type Francis ».
In 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012)
The Canadian Machinery Vibration Association.
Radvar-Esfahlan, Hassan et Tahan, Souheil-Antoine.
2012.
« Nonrigid geometric metrology using generalized numerical inspection fixtures ».
Precision Engineering, vol. 36, nº 1.
pp. 1-9.
Tahan, A. S. et Cauvier, J..
2012.
« Capability estimation of geometrical tolerance with a material modifier by a Hasofer-Lind index ».
Journal of Manufacturing Science and Engineering, vol. 134, nº 2.
Tahan, Antoine.
2012.
« Conception et assemblage, un mariage de raison ! ».
L’Atout, nº novembre.
pp. 16-18.
Thomas, Marc, Tahan, Antoine et Kedadouche, M..
2012.
« Comparison of acoustic emission and vibration measurements for early detection of bearing damages ».
In Research and Innovation for Transport Systems of the Future (RITF) (Paris, France, Nov. 15, 2012)
2011
Abenhaim, Gad N., Tahan, Antoine, Desrochers, Alain et Maranzana, Roland.
2011.
« A novel approach for the inspection of flexible parts without the use of special fixtures ».
Journal of Manufacturing Science and Engineering, vol. 133, nº 1.
Aidibe, A., Tahan, Antoine et Abenhaim, G. N..
2011.
« Dimensioning control of non-rigid parts using the Iterative Displacement Inspection with the maximum normed residual test ».
In 2nd International Conference on Fluid Mechanics and Heat and Mass Transfer (FLUIDSHEAT'11), 2nd International Conference on Theoretical and Applied Mechanics (TAM'11), 4th WSEAS International Conference on UPT'11 (CUHT'11) (Corfu Island, Greece, July 15-17, 2011)
pp. 13-18.
Corfu Island, Greece : World Scientific and Engineering Academy and Society. Beaulieu, N. et Tahan, Antoine. 2011. « Le portrait du lean manufacturing au Québec : sondage 2012 ». Communication lors de la conférence : Forum TI-PME 2011 (Montréal, QC, Canada, 20 avril 2011).
Beaulieu, Nicolas B. et Tahan, Antoine.
2011.
« Lean manufacturing au Québec : portrait 2010 ».
Montréal, Québec, Canada : Manufacturiers et Exportateurs au Québec. 45 p.
Chatelain, Jean-François, Lalonde, J. F. et Tahan, Antoine.
2011.
« A comparison of the distortion of machined parts resulting from residual stresses within workpieces ».
In 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011)
pp. 79-84.
World Scientific and Engineering Academy and Society.
Kamguem, René, Songmene, Victor, Kenné, Jean-Pierre et Tahan, Antoine.
2011.
« Surface quality of 7075-T6 aluminum alloy machined using high-speed milling process ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, Canada, Oct. 2-5, 2011)
pp. 495-508.
Westmount : MetSoc. Pelletier, F., Masson, Christian et Tahan, Antoine. 2011. « Running advanced analytics using MATLAB and PI system ». Communication lors de la conférence : OSIsoft user conference (San Francisco, CA, USA, Mar. 28-30, 2011).
Radvar-Esfahlan, Hassan et Tahan, Antoine.
2011.
« Distance preserving dimensionality reduction methods and their applications in geometric inspection of nonrigid parts ».
In 5th symposium on Advances in Science and Technology (Mashhad, Iran, May 12-17, 2011)
Tahan, Antoine. 2011. « Exploiter les études de capabilité ». Communication lors de la conférence : 3e Journée de Métrologie en Aérospatiale (Montréal, QC, Canada, 28 avril 2011). Tahan, Antoine. 2011. « La gestion de la qualité : histoire, présent et future ». Communication lors de la conférence : Colloque Annuel de l'Ordre des Ingénieurs du Québec (Montréal, QC, Canada, 12-13 mai 2011).
Tahan, Antoine S. et Levesque, Sylvain.
2011.
« Exploiting the process capability in the statistical estimation of the tolerance of location ».
Mechanics and Industry, vol. 12, nº 6.
pp. 503-512.
Tahan, Antoine, Thibault, Denis, Marcouiller, Luc, Gagnon, Martin et Szczota, Mickael.
2011.
« Modeling operation history of hydroelectric turbines ».
In The HydroVision International Conference (Sacramento, CA, USA, July 19-22, 2011)
2010
Corriveau, Guillaume, Guilbault, Raynald et Tahan, Antoine.
2010.
« Genetic algorithms and finite element coupling for mechanical optimization ».
Advances in Engineering Software, vol. 41, nº 3.
pp. 422-426.
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2010.
« Impact of startup scheme on Francis runner life expectancy ».
In 25th IAHR Symposium on Hydraulic Machinery and Systems (Timişoara, Romania, 20–24 Sept. 2010)
Coll. « IOP Conference Series : Earth and Environmental Science », vol. 12.
012107.
London, UK : Institute of Physics Publishing.
Gosselin, Claude, Tahan, Antoine, Ruel, Michel et Desnoyers, Mathieu.
2010.
« Simplified approach for monitoring the performance of multivariable processes ».
In Proceedings of the 2nd International Congress of Automation in the Mining Industry (Santiago, Chile, Nov. 10-12, 2010)
Pelletier, Francis, Masson, Christian, Tahan, Antoine et Jetté, Martin. 2010. « Experiment using high-frequency data sampling ». Affiche présentée lors de la conférence : Windpower Conference and Exhibition (Dallas, TX, USA, May 23-26, 2010). Pelletier, Francis, Masson, Christian, Tahan, Antoine et Jetté, Martin. 2010. « Modelling through high frequency data sampling and other advantages ». Communication lors de la conférence : European Wind Energy Conference and Exhibition (EWEC) (Warsaw, Poland, April 20-23, 2010). Potvin, Marc et Tahan, Antoine. 2010. « Investigation metrology ». Communication lors de la conférence : 3D Imaging Conference and Exposition (Anaheim, Ca., USA, May 18-20, 2010).
Radvar-Esfahlan, Hassan et Tahan, Antoine.
2010.
« Nonrigid geometric inspection using intrinsic geometry ».
In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C., Canada, June 7-9, 2010)
Seers, Patrice, Terrier, P., Tahan, Antoine et Thomas, Marc.
2010.
« Case Study : hybrid vehicles : the Honda insight and Toyota Prius : transition towards the automobile of the future? ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
pp. 83-109. Newcastle upon Tyne, UK : Cambridge Scholars Publishing. Tahan, Antoine. 2010. « Le rapport de mesure, puis après? ». Communication lors de la conférence : 2ème Journée de la métrologie en aérospatiale (JMA) (Montréal, Québec, Canada, 11 mars 2010). 2009
Gagnon, Martin, Tahan, Antoine et Coutu, André.
2009.
« Uncertainty in operational modal analysis of hydraulic turbine components ».
[Article de conférence]. International Journal of Fluid Machinery and Systems, vol. 2, nº 4.
pp. 278-285.
Quintana, Virgilio, Rivest, Louis, Pellerin, Robert, Tahan, Antoine et Venne, Frédérick.
2009.
« From fully dimensioned 2D drawings to reduced dimensioning 3D model-based definition ».
In Proceedings of the International Conference on Product Lifecycle Management : Supporting the Extended Enterprise (Bath, United Kingdom, July 6-9, 2009)
pp. 539-548.
Geneve, Switzerland : Inderscience Enterprise Ltd. Tahan, Antoine. 2009. « La gestion des variations géométriques : le présent et l'avenir ». Communication lors de la conférence : 1ère Journée de la Métrologie en Aérospatiale (JMA) (Montréal, QC, Canada, 5 mars 2009).
Tahan, Antoine et Levesque, Sylvain.
2009.
« Exploiting the process capability of position geometric tolerance according GD & T ASME Y14.5M ».
In International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009)
pp. 1267-1272.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Tahan, Antoine et Levesque, Sylvain.
2009.
« Exploiting the process capability of profile tolerance according GD&T ASME-Y14.5M ».
In International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009)
pp. 1285-1290.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society. 2008
Abenhaïm, G.N., Tahan, Antoine et Maranzana, Roland.
2008.
« Nouveau algorithme pour l'inspection des coques flexibles par déplacement itératif ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Lacasse, Louis, Tahan, Antoine et Liu, Zhaoheng.
2008.
« Robust method for the automatic characterization of a wooden board's geometrical state ».
Quality Engineering, vol. 20, nº 2.
pp. 221-231.
Pelletier, F., Masson, Christian et Tahan, Antoine.
2008.
« Power performance evaluation and improvement of operational wind power plant ».
In OSIsoft Wind Power User Group Meeting (Chicago, IL, USA, June 4, 2008)
2007
Corriveau, G., Guilbault, Raynald et Tahan, Antoine.
2007.
« Genetic algorithms and finite element coupling for mechanical optimization ».
In 10th International Conference on Optimum Design in Engineering (OPTI) (Myrtle Beach, USA, May 7- 9, 2007)
pp. 87-96.
Southampton, UK : WITPress.
Corriveau, G., Guilbault, Raynald et Tahan, Antoine.
2007.
« Optimisation d'une turbine hydroélectrique par algorithmes génétiques ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Lacasse, L., Tahan, Antoine et Liu, Zhaoheng.
2007.
« Automatic characterization of wood board surface defects ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Tahan, Antoine, Liu, Zhaoheng et Lacasse, L..
2007.
« New method for characterization of wood ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure. 2006
Gagnon, Martin, Tahan, Antoine, Coutu, André et Thomas, Marc.
2006.
« Analyse modale opérationnelle en présence d'excitations harmoniques : étude de cas sur des composantes de turbine hydroélectrique ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montréal, QC, Canada, 25-27 oct. 2006)
pp. 320-329.
Calgary, Canada : ACVM.
Michaud, J.P., Songmene, Victor et Tahan, Antoine.
2006.
« Aluminium alloy 7050 T7451 thin wall high-speed machining parts study ».
In 3th International Symposium on Aerospace Materials and Manufacturing Processes: Emerging Materials, Manufacturing, and Repair Techniques (Montreal, QC, Canada, Oct. 2-4, 2006)
Canada : The Metallurgy and Materials Society. 2005
Castonguay, J. P. et Tahan, A. S..
2005.
« Correlated characteristics identification and effect in statistical tolerance design ».
WSEAS Transactions on Mathematics, vol. 4, nº 4.
pp. 319-326. 2004
Chatelain, Jean-François, Boutin, Y., Marchand, Françoise et Tahan, Antoine.
2004.
« Productivity assessment from advanced integration of canned cycles to CAD/CAM software ».
WSEAS Transactions on Systems, vol. 3, nº 3.
pp. 1187-92. Tahan, Antoine, Songmene, Victor et Chatelain, Jean-François. 2004. « Case study of the application of statistical tolerances taking account of correlation ». Communication lors de la conférence : International Conference on Computers and Industrial Engineering (San Francisco, CA, USA, Nov., 2004). 1993
Tahan, S. A., Kamwa, I., Viarouge, P. et Ferfra, M..
1993.
« A generalized model of satured synchronous machines ».
In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993)
pp. 585-590.
International Association for Mathematics and Computers in Simulation.
Tahan, S. A., Kamwa, I., Viarouge, P., Ferfra, M. et Le-Huy, H..
1993.
« Identification of solid-rotor asynchronous-machine parameters from standstill tests in the time domain using nonlinear techniques ».
In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993)
pp. 603-608.
International Association for Mathematics and Computers in Simulation. 1991Tahan, Souheil-Antoine, El Chebair, Abdallah et Dickinson, John. 1991. « Étude théorique de la stabilité des coques cylindriques soumises à un écoulement axial ». Communication lors de la conférence : 59e congrès de l'ACFAS (Sherbrooke, QC, Canada, 21-24 mai 1991). |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau