| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Document quand le type de document est "Article publié dans une revue, révisé par les pairs" et l'année est 2013Nombre de documents archivés : 403.
Abboud, Talal, Bamsey, Matthew, Paul, Anna-Lisa, Graham, Thomas, Braham, Stephen, Noumeir, Rita, Berinstain, Alain et Ferl, Robert.
2013.
« Deployment of a fully-automated green fluorescent protein imaging system in a high arctic autonomous greenhouse ».
Sensors, vol. 13, nº 3.
pp. 3530-3548.
Abboud, Talal, Berinstain, Alain, Bamsey, Matthew, Ferl, Robert, Paul, Anna-Lisa, Graham, Thomas, Dixon, Mike, Demos, Leonardos, Stasiak, Michael et Rita, Noumeir.
2013.
« Multispectral plant health imaging system for space biology and hypobaric plant growth studies ».
Insciences Journal, vol. 3, nº 2.
pp. 24-44.
Abo-El-Ezz, Ahmad, Nollet, Marie-José et Nastev, Miroslav.
2013.
« Seismic fragility assessment of low-rise stone masonry buildings ».
Earthquake Engineering and Engineering Vibration, vol. 12, nº 1.
pp. 87-97.
Abran, Alain, Al-Sarayreh, K. T. et Cuadrado-Gallego, J. J..
2013.
« A standards-based reference framework for system portability requirements ».
Computer Standards and Interfaces, vol. 35, nº 4.
pp. 380-395.
Adewusi, S., Rakheja, S., Marcotte, P. et Thomas, Marc.
2013.
« Distributed vibration power absorption of the human hand-arm system in different postures coupled with vibrating handle and power tools ».
International Journal of Industrial Ergonomics, vol. 43, nº 4.
pp. 363-374.
Ahmadi, Ali, Buat, Matthew D. et Hoorfar, Mina.
2013.
« Microdroplet evaporation in closed digital microfluidic biochips ».
Journal of Micromechanics and Microengineering, vol. 23, nº 4.
Al Hadi, Richard, Grzyb, Janusz, Heinemann, Bernd et Pfeiffer, Ullrich R..
2013.
« A terahertz detector array in a SiGe HBT technology ».
IEEE Journal of Solid-State Circuits, vol. 48, nº 9.
pp. 2002-2010.
Alaie, Hesam Farsaie et Tadj, Chakib.
2013.
« Splitting of Gaussian models via adapted BML method pertaining to cry-based diagnostic system ».
Engineering, vol. 5, nº 10B.
pp. 277-283.
Alfaifi, Ahmad, Allidina, Karim, Nabki, Frederic et El-Gamal, Mourad N..
2013.
« A low cross-sensitivity dual-axis silicon-on-insulator accelerometer integrated as a system in package with digital output ».
Analog Integrated Circuits and Signal Processing, vol. 77, nº 3.
pp. 345-354.
Alfonso-Lizarazo, Edgar H., Montoya-Torres, Jairo R. et Gutiérrez-Franco, Edgar.
2013.
« Modeling reverse logistics process in the agro-industrial sector: The case of the palm oil supply chain ».
Applied Mathematical Modelling, vol. 37, nº 23.
pp. 9652-9664.
Alijani, Farbod, Amabili, Marco, Ferrari, Giovanni et D'Alessandro, Vincenzo.
2013.
« Nonlinear vibrations of laminated and sandwich rectangular plates with free edges. Part 2: Experiments & comparisons ».
Composite Structures, vol. 105.
pp. 437-445.
Almakadmeh, Khaled et Abran, Alain.
2013.
« Experimental evaluation of an industrial technique for the approximation of software functional size ».
International Journal of Computers and Technology, vol. 10, nº 3.
Al-Sarayreh, K. T., Abran, Alain et Cuadrado-Gallego, J. J..
2013.
« A standards-based model of system maintainability requirements ».
Journal of Software: Evolution and Process, vol. 25, nº 5.
pp. 459-505.
Ameur, Khaled et Masson, Christian.
2013.
« Effects of wind turbine rotor modelling on nacelle anemometry ».
Wind Engineering, vol. 37, nº 6.
pp. 617-636.
Amokrane, Ahmed, Zhani, Mohamed Faten, Langar, Rami, Boutaba, Raouf et Pujolle, Guy.
2013.
« Greenhead: Virtual data center embedding across distributed infrastructures ».
IEEE Transactions on Cloud Computing, vol. 1, nº 1.
pp. 36-49.
Anderson, Melissa, Gholipour, Javad, Bridier, Florent, Bocher, Philippe, Jahazi, Mohammad, Savoie, Jean et Wanjara, Priti.
2013.
« Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 37, nº 1.
pp. 39-52.
Anton, N., Botez, Ruxandra et Popescu, D..
2013.
« Application of the weight function method on a high incidence research aircraft model ».
Aeronautical Journal, vol. 117, nº 1195.
pp. 897-912.
Arora, Himani, Shukla, K. K. et Duong, Luc.
2013.
« Stent fitting using cylindrical affine transformation model for pulmonary artery ».
International Journal of Computer Applications, vol. 70, nº 19.
pp. 36-41.
Arrieta, C., Yingying, Dong, Lan, A. et Vu-Khanh, Toan.
2013.
« Outdoor weathering of polyamide and polyester ropes used in fall arrest equipment ».
Journal of Applied Polymer Science, vol. 130, nº 5.
pp. 3058-3065.
Arsenault, Richard, Brissette, François, Malo, Jean-Stéphane, Minville, Marie et Leconte, Robert.
2013.
« Structural and Non-Structural Climate Change Adaptation Strategies for the Peribonka Water Resource System ».
Water Resources Management, vol. 27, nº 7.
pp. 2075-2087.
Asami, T., Whitford, T. J., Bouix, S., Dickey, C. C., Niznikiewicz, M., Shenton, M. E., Voglmaier, M. M. et McCarley, R. W..
2013.
« Globally and locally reduced MRI gray matter volumes in neuroleptic-naive men with schizotypal personality disorder ».
JAMA Psychiatry, vol. 70, nº 4.
pp. 361-372.
Asselin-Balençon, Anne C., Popp, Jennie, Henderson, Andrew, Heller, Martin, Thoma, Greg et Jolliet, Olivier.
2013.
« Dairy farm greenhouse gas impacts: A parsimonious model for a farmer's decision support tool ».
International Dairy Journal, vol. 31, nº 1.
S65-S77.
Attabi, Yazid et Dumouchel, Pierre.
2013.
« Anchor models for emotion recognition from speech ».
IEEE Transactions on Affective Computing, vol. 4, nº 3.
pp. 280-290.
Azevedo, Ligia B., Henderson, Andrew D., Van Zelm, Rosalie, Jolliet, Olivier et Huijbregts, Mark A. J..
2013.
« Assessing the importance of spatial variability versus model choices in life cycle impact assessment: The case of freshwater eutrophication in Europe ».
Environmental Science and Technology, vol. 47, nº 23.
pp. 13565-13570.
Badache, Messaoud, Rousse, Daniel R., Hallé, Stéphane et Quesada, Guillermo.
2013.
« Experimental and numerical simulation of a two-dimensional unglazed transpired solar air collector ».
Solar Energy, vol. 93.
pp. 209-219.
Badri, A., Nadeau, S. et Gbodossou, A..
2013.
« A new practical approach to risk management for underground mining project in Quebec ».
Journal of Loss Prevention in the Process Industries, vol. 26, nº 6.
pp. 1145-1158.
Balima, O., Favennec, Y. et Rousse, Daniel.
2013.
« Optical tomography reconstruction algorithm with the finite element method: an optimal approach with regularization tools ».
Journal of Computational Physics, vol. 251.
pp. 461-479.
Bari, M. F., Boutaba, R., Esteves, R., Granville, L. Z., Podlesny, M., Rabbani, M. G., Qi, Zhang et Zhani, M. F..
2013.
« Data center network virtualization: a survey ».
IEEE Communications Surveys and Tutorials, vol. 15, nº 2.
pp. 909-928.
Baril, Yannick, Bourgeois, Yan, Brailovski, Vladimir, Duke, Kajsa, Laflamme, G. Yves et Petit, Yvan.
2013.
« Improving greater trochanteric reattachment with a novel cable plate system ».
Medical Engineering and Physics, vol. 35, nº 3.
pp. 383-391.
Barka, N., Bocher, Philippe et Brousseau, J..
2013.
« Sensitivity study of hardness profile of 4340 specimen heated by induction process using axisymmetric modeling ».
International Journal of Advanced Manufacturing Technology, vol. 69, nº 9-12.
pp. 2747-2756.
Batista, Luana, Badri, Bechir, Sabourin, Robert et Thomas, Marc.
2013.
« A classifier fusion system for bearing fault diagnosis ».
Expert Systems with Applications, vol. 40, nº 17.
pp. 6788-6797.
Bazrafshan, Amir, Taherzadeh-Sani, Mohammad et Nabki, Frederic.
2013.
« A low-complexity digital background calibration of sample-time error in time-interleaved A/D converters ».
Analog Integrated Circuits and Signal Processing, vol. 76, nº 2.
pp. 245-249.
Beauchamp, Josée, Leconte, Robert, Trudel, Melanie et Brissette, François.
2013.
« Estimation of the summer-fall PMP and PMF of a northern watershed under a changed climate ».
Water Resources Research, vol. 49, nº 6.
pp. 3852-3862.
Beauséjour, Marie, Goulet, Lise, Parent, Stefan, Feldman, Debbie, Turgeon, Isabelle, Roy-Beaudry, Marjolaine, Sosa, Jose et Labelle, Hubert.
2013.
« The effectiveness of scoliosis screening programs: methods for systematic review and expert panel recommendations formulation ».
Scoliosis, vol. 8, nº 1.
Bédard, Joël, Wei, Yu, Gagnon, Yves et Masson, Christian.
2013.
« Development of a geophysic model output statistics module for improving short-term numerical wind predictions over complex sites ».
Wind Energy, vol. 16, nº 8.
pp. 1131-1147.
Ben Mosbah, Abdallah, Flores Salinas, Manuel, Botez, Ruxandra et Dao, Thien-My.
2013.
« New Methodology for Wind Tunnel Calibration Using Neural Networks - EGD Approach ».
[Article de conférence]. SAE International Journal of Aerospace, vol. 6, nº 2.
pp. 761-766.
Benazza, Tewfik et Chaallal, Omar.
2013.
« Dynamic amplification factors for coupled shear walls and partially coupled ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 40, nº 1.
pp. 76-85.
Bergeron-Brlek, Milan, Teoh, Timothy et Britton, Robert.
2013.
« A tandem organocatalytic α-chlorination-aldol reaction that proceeds with dynamic kinetic resolution: A powerful tool for carbohydrate synthesis ».
Organic Letters, vol. 15, nº 14.
pp. 3554-3557.
Berthe, Valérie, Lacasse, Annie, Paquin, Geneviève et Provençal, Xavier.
2013.
« A study of Jacobi-Perron boundary words for the generation of discrete planes ».
Theoretical Computer Science, vol. 502.
pp. 118-142.
Bertolini, D., Oliveira, L. S., Justino, E. et Sabourin, Robert.
2013.
« Texture-based descriptors for writer identification and verification ».
Expert Systems with Applications, vol. 40, nº 6.
pp. 2069-2080.
Bianco, R. J., Arnoux, P. J., Mac-Thiong, J. M., Wagnac, Éric et Aubin, C. E..
2013.
« Biomechanical analysis of pedicle screw pullout strength ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 16, nº suppl. 1.
pp. 246-248.
Blanchard, F., Doi, A., Tanaka, T. et Tanaka, K..
2013.
« Real-time, subwavelength terahertz imaging ».
Annual Review of Materials Research, vol. 43, nº 1.
pp. 237-259.
Blanchard, F., Ooi, K., Tanaka, T., Doi, A. et Tanaka, K..
2013.
« Near-field terahertz imaging of a discontinuity in split ring resonator array ».
EPJ Web of Conferences, vol. 41.
Blanchard, François.
2013.
« Development of a real-time terahertz near-field microscope ».
Oyo buturi : a monthly publication of The Japan Society of Applied Physics, vol. 82, nº 3.
p. 158.
Boisclair, Dominic, Mac-Thiong, Jean-Marc, Parent, Stefan et Petit, Yvan.
2013.
« Compressive loading of the spine may affect the spinal canal encroachment of burst fractures ».
Journal of Spinal Disorders and Techniques, vol. 26, nº 6.
pp. 342-346.
Boivin, A., Lai, P., Samson, C., Cloutis, E., Holladay, S. et Monteiro Santos, F. A..
2013.
« Electromagnetic induction sounding and 3D laser imaging in support of a Mars methane analogue mission ».
Planetary and Space Science, vol. 82-83.
pp. 27-33.
Boton, Conrad, Kubicki, Sylvain et Halin, Gilles.
2013.
« Designing adapted visualization for collaborative 4D applications ».
Automation in Construction, vol. 36.
pp. 152-167.
Bouix, S., Pasternak, O., Rathi, Y., Pelavin, P. E., Zafonte, R. et Shenton, M. E..
2013.
« Increased gray matter diffusion anisotropy in patients with persistent post-concussive symptoms following mild traumatic brain injury ».
PLoS ONE, vol. 8, nº 6.
Boukhattem, L., Bendou, A., Hamdi, H. et Rousse, D. R..
2013.
« Numerical simulation of coupled heat transfers through a building ».
Physical and Chemical News, vol. 67.
pp. 78-83.
Boukhattem, Lahcen, Hamdi, Hassan et Rousse, D. R..
2013.
« Numerical simulation of heat transfers in a room in the presence of a thin horizontal heated plate ».
[Article de conférence]. Energy Procedia, vol. 42.
pp. 549-556.
Boukherroub, T., Ruiz, A., Guinet, A. et Fondrevelle, J..
2013.
« An integrated approach for the optimization of the sustainable performance: A wood supply chain ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 46, nº 9.
pp. 186-191.
Bouslah, B., Gharbi, Ali, Pellerin, R. et Hajji, Adnéne.
2013.
« Optimal production control policy in unreliable batch processing manufacturing systems with transportation delay ».
International Journal of Production Research, vol. 51, nº 1.
pp. 264-280.
Bouslah, Bassem, Gharbi, Ali et Pellerin, Robert.
2013.
« Joint optimal lot sizing and production control policy in an unreliable and imperfect manufacturing system ».
International Journal of Production Economics, vol. 144, nº 1.
pp. 143-156.
Bousselham, Abdelhak et Chaallal, Omar.
2013.
« Experimental investigations on the influence of size on the performance of RC T-beams retrofitted in shear with CFRP fabrics ».
Engineering Structures, vol. 56.
pp. 1070-1079.
Boutana, N., Bocher, P. et Jahazi, M..
2013.
« Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata ».
International Journal of Fatigue, vol. 51.
pp. 49-56.
Bouzidane, A. et Thomas, Marc.
2013.
« Nonlinear Dynamic Analysis of a Rigid Rotor Supported by a Three-Pad Hydrostatic Squeeze Film Dampers ».
Tribology Transactions, vol. 56, nº 5.
pp. 717-727.
Bouzidane, A. et Thomas, Marc.
2013.
« Nonlinear dynamic behavior of a flexible shaft supported by smart hydrostatic squeeze film dampers ».
Journal of Tribology, vol. 135, nº 3.
Brailovski, Vladimir, Prokoshkin, S., Gauthier, M., Inaekyan, K. et Dubinskiy, S..
2013.
« Mechanical properties of porous metastable beta Ti-Nb-Zr alloys for biomedical applications ».
Journal of Alloys and Compounds, vol. 577.
pp. 413-417.
Brandão, Miguel, Levasseur, Annie, Kirschbaum, Miko U. F., Weidema, Bo P., Cowie, Annette L., Jørgensen, Susanne Vedel, Hauschild, Michael Z., Pennington, David W. et Chomkhamsri, Kirana.
2013.
« Key issues and options in accounting for carbon sequestration and temporary storage in life cycle assessment and carbon footprinting ».
International Journal of Life Cycle Assessment, vol. 18, nº 1.
pp. 230-240.
Brière-Côté, Antoine, Rivest, Louis et Maranzana, Roland.
2013.
« 3D CAD model comparison: An evaluation of model difference identification technologies ».
Computer-Aided Design and Applications, vol. 10, nº 2.
pp. 173-195.
Broustail, G., Halter, F., Seers, P., Moréac, G. et Mounaïm-Rousselle, C..
2013.
« Experimental determination of laminar burning velocity for butanol/iso-octane and ethanol/iso-octane blends for different initial pressures ».
Fuel, vol. 106.
pp. 310-317.
Bui, Quang Hien, Pham, Xuan Tan et Fafard, Mario.
2013.
« Modelling of microstructure effects on the mechanical behavior of aluminium tubes drawn with different reduction areas ».
International Journal of Plasticity, vol. 50.
pp. 127-145.
Bury, Jeffrey, Mark, Bryan G., Carey, Mark, Young, Kenneth R., McKenzie, Jeffrey M., Baraër, Michel, French, Adam et Polk, Molly H..
2013.
« New geographies of water and climate change in Peru: coupled natural and social transformations in the Santa River watershed ».
Annals of the Association of American Geographers, vol. 103, nº 2.
pp. 363-374.
Callot, V., Fradet, L., Ranjeva, J. P., Duhamel, G., Girard, O., Arnoux, P. J. et Petit, Y..
2013.
« Standards morphologiques de la moelle épinière humaine – Validations et applications préliminaire à des patients ».
Morphologie, vol. 97, nº 318–319.
pp. 101-102.
Caouette, Christiane, Bureau, Martin N., Lavigne, Martin, Vendittoli, Pascal-André et Nuño, Natalia.
2013.
« A new interface element with progressive damage and osseointegration for modeling of interfaces in hip resurfacing ».
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 227, nº 3.
pp. 209-220.
Carastan, Danilo J., Amurin, Leice G., Craievich, Aldo F., Goncalves, Maria Do Carmo et Demarquette, Nicole R..
2013.
« Morphological evolution of oriented clay-containing block copolymer nanocomposites under elongational flow ».
European Polymer Journal, vol. 49, nº 6.
pp. 1391-1405.
Carbonneau, Marc-André, Lezzoum, Narimene, Voix, Jérémie et Gagnon, Ghyslain.
2013.
« Detection of alarms and warning signals on an digital in-ear device ».
International Journal of Industrial Ergonomics, vol. 43, nº 6.
pp. 503-511.
Cardinal, Patrick, Dumouchel, Pierre et Boulianne, Gilles.
2013.
« Large vocabulary speech recognition on parallel architectures ».
IEEE Transactions on Audio, Speech, and Language Processing, vol. 21, nº 11.
pp. 2290-2300.
Catelli de Souza, Adriana Martinelli, Calvao, Patricia Schmid et Demarquette, Nicole Raymonde.
2013.
« Linear viscoelastic behavior of compatibilized PMMA/PP blends ».
Journal of Applied Polymer Science, vol. 129, nº 3.
pp. 1280-1289.
Causse, Philippe, Ruiz, Ed et Trochu, François.
2013.
« Influence of preforming on the quality of curved composite parts manufactured by flexible injection ».
International Journal of Material Forming, vol. 6, nº 3.
pp. 341-362.
Cavalin, Paulo R., Sabourin, Robert et Suen, Ching Y..
2013.
« Dynamic selection approaches for multiple classifier systems ».
Neural Computing and Applications, vol. 22, nº 3-4.
pp. 673-688.
Chamanfar, A., Sarrat, L., Jahazi, M., Asadi, M., Weck, A. et Koul, A. K..
2013.
« Microstructural characteristics of forged and heat treated Inconel-718 disks ».
Materials and Design, vol. 52.
pp. 791-800.
Chamanfar, Ahmad, Jahazi, Mohammad, Gholipour, Javad, Wanjara, Priti et Yue, Stephen.
2013.
« Modeling grain size and strain rate in linear friction welded Waspaloy ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 44, nº 9.
pp. 4230-4238.
Chapleau, Julien, Canet, Fanny, Petit, Yvan, Sandman, Emilie, Laflamme, G. Yves et Rouleau, Dominique M..
2013.
« Demographic and anthropometric factors affecting elbow range of motion in healthy adults ».
Journal of Shoulder and Elbow Surgery, vol. 22, nº 1.
pp. 88-93.
Chauchat, Julien, Guillou, Sylvain, Pham Van Bang, Damien et Dan Nguyen, Kim.
2013.
« Modelling sedimentation-consolidation in the framework of a one-dimensional two-phase flow model ».
Journal of Hydraulic Research, vol. 51, nº 3.
pp. 293-305.
Chen, Guangyi et Coulombe, Stéphane.
2013.
« An image visual quality assessment method based on SIFT features ».
Journal of Pattern Recognition Research, vol. 8, nº 1.
pp. 85-97.
Chen, Jie, Brissette, François P., Chaumont, Diane et Braun, Marco.
2013.
« Finding appropriate bias correction methods in downscaling precipitation for hydrologic impact studies over North America ».
Water Resources Research, vol. 49, nº 7.
pp. 4187-4205.
Chen, Jie, Brissette, François P., Chaumont, Diane et Braun, Marco.
2013.
« Performance and uncertainty evaluation of empirical downscaling methods in quantifying the climate change impacts on hydrology over two North American river basins ».
Journal of Hydrology, vol. 479.
pp. 200-214.
Cheriet, Mohamed, Farrahi Moghaddam, R. et Hedjam, R..
2013.
« A learning framework for the optimization and automation of document binarization methods ».
Computer Vision and Image Understanding, vol. 117, nº 3.
pp. 269-280.
Chevalier, F. et Laporte, C. Y..
2013.
« Amélioration des processus de gestion des petits et des moyens projets dans une société d’ingénierie canadienne ».
Génie Logiciel, nº 106.
pp. 20-34.
Chossat, J. B., Yong-Lae, Park, Wood, R. J. et Duchaine, Vincent.
2013.
« A Soft Strain Sensor Based on Ionic and Metal Liquids ».
IEEE Sensors Journal, vol. 13, nº 9.
pp. 3405-3414.
Chowdhury, Rasheda Arman, Lina, Jean Marc, Kobayashi, Eliane et Grova, Christophe.
2013.
« MEG Source localization of spatially extended generators of epileptic activity: comparing entropic and hierarchical bayesian approaches ».
PLoS ONE, vol. 8, nº 2.
Cicek, Paul-Vahe, Zhang, Qing, Saha, Tanmoy, Mahdavi, Sareh, Allidina, Karim, Nabki, Frederic et El-Gamal, Mourad.
2013.
« A novel prototyping method for die-level monolithic integration of MEMS above-IC ».
Journal of Micromechanics and Microengineering, vol. 23, nº 6.
065013.
Clemm von Hohenberg, Christian, Wigand, Marlene C., Kubicki, Marek, Leicht, Gregor, Giegling, Ina, Karch, Susanne, Hartmann, Annette M., Konte, Bettina, Friedl, Marion, Ballinger, Thomas, Eckbo, Ryan, Bouix, Sylvain, Jäger, Lorenz, Shenton, Martha E., Rujescu, Dan et Mulert, Christoph.
2013.
« CNTNAP2 polymorphisms and structural brain connectivity: A diffusion-tensor imaging study ».
Journal of Psychiatric Research, vol. 47, nº 10.
pp. 1349-1356.
Cloutier, Luc P., Laflamme, G. Yves et Petit, Yvan.
2013.
« Biomechanical analysis of trochanteric fracture fixations using a Y-shaped locking plate ».
Journal of Orthopaedic Trauma, vol. 27, nº 12.
pp. 702-707.
Collin, Charly, Ribardiere, Mickael, Gruson, Adrien, Cozot, Remi, Pattanaik, Sumanta et Bouatouch, Kadi.
2013.
« Visibility-driven progressive volume photon tracing ».
Visual Computer, vol. 29, nº 9.
pp. 849-859.
Connolly, Jean-François, Granger, Eric et Sabourin, Robert.
2013.
« Dynamic multi-objective evolution of classifier ensembles for video face recognition ».
Applied Soft Computing, vol. 13, nº 6.
pp. 3149-3166.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2013.
« Review of phenotypic diversity formulations for diagnostic tool ».
Applied Soft Computing, vol. 13, nº 1.
pp. 9-26.
Couderc, H., Frechette, M., David, Éric et Savoie, S..
2013.
« Study of dielectric relaxation of epoxy composites containing micro and nano particles ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, nº 2.
pp. 592-600.
Coutu, Jean-Michel, Fatimi, Ahmed, Berrahmoune, Saoussen, Soulez, Gilles et Lerouge, Sophie.
2013.
« A new radiopaque embolizing agent for the treatment of endoleaks after endovascular repair: influence of contrast agent on chitosan thermogel properties ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 101B, nº 1.
pp. 153-161.
Cruz, R. M. O., Cavalcanti, G. D. C., Ing Ren, Tsang et Sabourin, Robert.
2013.
« Feature representation selection based on Classifier Projection Space and Oracle analysis ».
Expert Systems with Applications, vol. 40, nº 9.
pp. 3813-3827.
Dancila, B. D., Botez, Ruxandra et Labour, D..
2013.
« Fuel burn prediction algorithm for cruise, constant speed and level flight segments ».
Aeronautical Journal, vol. 117, nº 1191.
pp. 491-504.
Danouj, B., Tahan, S.-Antoine et David, Éric.
2013.
« Using a new generation of piezoelectric sensors for partial discharge detection ».
Measurement: Journal of the International Measurement Confederation, vol. 46, nº 1.
pp. 660-666.
Davey, S. C., Ernst, R. E., Samson, C. et Grosfils, E. B..
2013.
« Hierarchical clustering of pit crater chains on Venus ».
Canadian Journal of Earth Sciences, vol. 50, nº 1.
pp. 109-126.
David, Éric et Fréchette, M..
2013.
« Polymer nanocomposites-major conclusions and achievements reached so far ».
IEEE Electrical Insulation Magazine, vol. 29, nº 6.
pp. 29-36.
David, Éric, Fréchette, Michel, Zazoum, Bouchaid, Daran-Daneau, Cyril, Ngô, Anh Dung et Couderc, Hugues.
2013.
« Dielectric Properties of PE/Clay Nanocomposites ».
Journal of Nanomaterials, vol. 2013.
De La Cruz, J. J., Paternina-Arboleda, C. D., Cantillo, V. et Montoya-Torres, J. R..
2013.
« A two-pheromone trail ant colony system - Tabu search approach for the heterogeneous vehicle routing problem with time windows and multiple products ».
Journal of Heuristics, vol. 19, nº 2.
pp. 233-252.
de Paula, Nathalia, Emiko Uechi, Mônica et Melhado, Silvio.
2013.
« Novas demandas para as empresas de projeto de edifícios ».
Ambiente Construído, vol. 13, nº 3.
pp. 137-159.
Delnavaz, Aidin et Voix, Jérémie.
2013.
« Ear canal dynamic motion as a source of power for in-ear devices ».
Journal of Applied Physics, vol. 113, nº 6.
Delnavaz, Aidin et Voix, Jérémie.
2013.
« Piezo-earpiece for micro-power generation from ear canal dynamic motion ».
Journal of Micromechanics and microengineering, vol. 23, nº 11.
Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2013.
« On the modeling of an intervertebral disc using a novel large deformation multi-shell approach ».
Journal of Biomechanical Engineering, vol. 135, nº 5.
Desharnais, Jean-Marc, Yıldızoğlu, Gülşah, April, Alain et Abran, Alain.
2013.
« Building Productivity Models for Small Enhancements ».
Journal of software engineering and applications, vol. 6, nº 3.
pp. 121-130.
Diop, Mamadou Diobet, Radji, Moufid, Hamoui, Anas A., Blaquière, Yves et Izquierdo, Ricardo.
2013.
« Evaluation of anisotropic conductive films based on vertical fibers for post-CMOS wafer-level packaging ».
IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 3, nº 4.
pp. 581-591.
Djebara, A., Zedan, Y., Kouam, Jules et Songmene, Victor.
2013.
« The effect of the heat treatment on the dust emission during machining of an Al-7Si-Mg cast alloys ».
Journal of Materials Engineering and Performance, vol. 22, nº 12.
pp. 3840-3853.
Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2013.
« Effects of machining conditions on specific surface of PM2.5 emitted during metal cutting ».
Health, vol. 5, nº 10A2.
pp. 36-43.
Dolez, Patricia, Cloutier, Yves, Noël, Alexandra, Tabet, Lyes, Gautrin, Denyse, Maximilien, Debia, L'Espérance, Gilles, Hallé, Stéphane, Bahloul, Ali et Vinches, Ludwing.
2013.
« Advancement in Quebec research on the prevention of risks related to occupational rxposure to nanomaterials ».
Relations industrielles / Industrial Relations, vol. 68, nº 4.
pp. 623-642.
Doutres, Olivier, Atalla, Noureddine et Dong, Kevin.
2013.
« A semi-phenomenological model to predict the acoustic behavior of fully and partially reticulated polyurethane foams ».
Journal of Applied Physics, vol. 113, nº 5.
Dubinskiy, S., Brailovski, Vladimir, Prokoshkin, S., Pushin, V., Inaekyan, K., Sheremetyev, V., Petrzhik, M. et Filonov, M..
2013.
« Structure and Properties of Ti-19.7Nb-5.8Ta Shape Memory Alloy Subjected to Thermomechanical Processing Including Aging ».
Journal of Materials Engineering and Performance, vol. 22, nº 9.
pp. 2656-2664.
Dugnani, Roberto et Zednik, Ricardo.
2013.
« Flexural strength by fractography in modern brittle materials ».
Journal of the American Ceramic Society, vol. 96, nº 12.
pp. 3908-3914.
Duhaime, François, Benabdallah, El Mehdi et Chapuis, Robert P..
2013.
« The Lachenaie clay deposit: some geochemical and geotechnical properties in relation to the salt-leaching process ».
Canadian Geotechnical Journal = Revue Canadienne de Géotechnique, vol. 50, nº 3.
pp. 311-325.
Dumas, Jean Pierre, Gibout, Stéphane, Cézac, Pierre, Franquet, Erwin et Haillot, Didier.
2013.
« Model for the DSC thermograms of the melting of ideal binary solutions ».
Thermochimica Acta, vol. 571.
pp. 64-76.
Dupont, Thomas, Leclaire, Philippe et Panneton, Raymond.
2013.
« Acoustic methods for measuring the porosities of porous materials incorporating dead-end pores ».
Journal of the Acoustical Society of America, vol. 133, nº 4.
pp. 2136-2145.
El Aidani, Rachid, Nguyen-Tri, Phuong, Malajati, Yassine, Lara, Jaime et Vu-Khanh, Toan.
2013.
« Photochemical aging of an e-PTFE/NOMEX membrane used in firefighter protective clothing ».
Polymer Degradation and Stability, vol. 98, nº 7.
pp. 1300-1310.
El Hachemi, M. Errachid, Naffrechoux, Emmanuel, Suptil, Joel et Hausler, Robert.
2013.
« Bicarbonate Effect in the Ozone-UV Process in the Presence of Nitrate ».
Ozone: Science and Engineering, vol. 35, nº 4.
pp. 302-307.
Elsayed, Mohannad Y., Nabki, Frederic et El-Gamal, Mourad N..
2013.
« A novel comb architecture for enhancing the sensitivity of bulk mode gyroscopes ».
Sensors, vol. 13, nº 12.
pp. 16641-16656.
Emami-Mehrgani, Behnam, Kenné, Jean-Pierre et Nadeau, Sylvie.
2013.
« Lockout/tagout and optimal production control policies in failure-prone non-homogenous transfer lines with passive redundancy ».
International Journal of Production Research, vol. 51, nº 4.
pp. 1006-1023.
Errico, Fausto, Crainic, Teodor Gabriel, Malucelli, Federico et Nonato, Maddalena.
2013.
« A survey on planning semi-flexible transit systems: Methodological issues and a unifying framework ».
Transportation Research Part C: Emerging Technologies, vol. 36.
pp. 324-338.
Eskander, George S., Sabourin, Robert et Granger, Éric.
2013.
« Hybrid writer-independent writer-dependent offline signature verification system ».
[Article de conférence]. IET Biometrics, vol. 2, nº 4.
pp. 169-181.
Essou, Gilles R. C. et Brissette, Francois.
2013.
« Climate change impacts on the Ouémé River, Benin, West Africa ».
Journal of Earth Science & Climatic Change, vol. 4, nº 6.
Estrada, Rebeca, Jarray, Abdallah, Otrok, Hadi, Dziong, Zbigniew et Barada, Hassan.
2013.
« Energy-efficient resource-allocation model for OFDMA Macrocell/Femtocell networks ».
IEEE Transactions on Vehicular Technology, vol. 62, nº 7.
pp. 3429-3437.
Facchinello, Yann, Brailovski, Vladimir, Inaekyan, Karina, Petit, Yvan et Mac-Thiong, Jean-Marc.
2013.
« Manufacturing of monolithic superelastic rods with variable properties for spinal correction: Feasibility study ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 22.
pp. 1-11.
Fareh, Raouf, Saad, Mohamad et Saad, Maarouf.
2013.
« Workspace tracking control of two-flexible-link manipulator using distributed control strategy ».
Journal of Control Science and Engineering, vol. 2013.
Fareh, Raouf, Saad, Mohamad et Saad, Maarouf.
2013.
« Workspace trajectory tracking control for two-flexible-link manipulator through output redefinition ».
International Journal of Modelling, Identification and Control, vol. 18, nº 2.
pp. 119-135.
Farrahi Moghaddam, Reza, Farrahi Moghaddam, Fereydoun et Cheriet, Mohamed.
2013.
« A modified GHG intensity indicator: Toward a sustainable global economy based on a carbon border tax and emissions trading ».
Energy Policy, vol. 57.
pp. 363-380.
Fatisson, J., Nadeau, Sylvie, Hallé, Stéphane, Viau, C., Camus, M. et Cloutier, Y..
2013.
« A pilot study towards ranking of occupational risk factors emanating from engineered nanoparticle: review of a decade of literature ».
International Journal of Safety and Security Engineering, vol. 3, nº 4.
pp. 241-264.
Fays, Julien et Botez, Ruxandra Mihaela.
2013.
« Algorithm for the aircraft trajectories considering No Fly Zones for a Flight Management System ».
INCAS Bulletin, vol. 5, nº 3.
pp. 77-88.
Félix Patron, R. S., Botez, R. M. et Labour, D..
2013.
« New altitude optimisation algorithm for the flight management system CMA-9000 improvement on the A310 and L-1011 aircraft ».
Aeronautical Journal, vol. 117, nº 1194.
pp. 787-805.
Feng, Zhengkun, Champliaud, Henri, Sabourin, Michel et Morin, Sebastien.
2013.
« Optimal blank design based on finite element method for blades of large Francis turbines ».
Simulation Modelling Practice and Theory, vol. 36.
pp. 11-21.
Forgues, D. et Becerik-Gerber, B..
2013.
« Integrated project delivery and building information modeling: Redefining the relationship between education and practice ».
International Journal of Design Education, vol. 6, nº 2.
pp. 47-56.
Forouzanfar, Mohamad, Ahmad, Saif, Batkin, Izmail, Dajani, Hilmi R., Groza, Voicu Z. et Bolic, Miodrag.
2013.
« Coefficient-free blood pressure estimation based on pulse transit time-cuff pressure dependence ».
IEEE Transactions on Biomedical Engineering, vol. 60, nº 7.
pp. 1814-1824.
Foucault, G., Cuilliere, J. C., Francois, V., Leon, J. C. et Maranzana, R..
2013.
« Generalizing the advancing front method to composite surfaces in the context of meshing constraints topology ».
Computer-Aided Design, vol. 45, nº 11.
pp. 1408-1425.
Fradet, L., Petit, Yvan, Wagnac, Éric, Aubin, C. E. et Arnoux, P. J..
2013.
« Spine model for safety and surgery (SM2S) : vers une caractérisation du comportement traumatique du rachis thoraco-lombaire ».
[Résumé d'une communication à une conférence]. Morphologie, vol. 97, nº 318–319.
p. 77.
Fradet, L., Vachon, A., Levasseur, A., Arnoux, P. J. et Petit, Yvan.
2013.
« Prediction of bone anisotropic mechanical properties in osteoporotic human vertebral body from microstructural parameters ».
[Article de conférence]. Computer Methods in Biomechanics and Biomedical Engineering, vol. 16, nº suppl. 1.
pp. 326-327.
Francis, Adel.
2013.
« The chronographical approach for construction project modelling ».
Proceedings of the Institution of Civil Engineers: Management, Procurement and Law, vol. 166, nº 4.
pp. 188-204.
Francis, Adel, Bibai, Jacques et Miresco, Edmond.
2013.
« Simulation of scheduling logic using dynamic functions ».
Proceedings of the Institution of Civil Engineers: Management, Procurement and Law, vol. 166, nº 3.
pp. 145-158.
François, Véronique et Laramee, F..
2013.
« Multicore Fiber Optimization for Application to Chip-to-Chip Optical Interconnects ».
Journal of Lightwave Technology, vol. 31, nº 24.
pp. 4022-4028.
Fraser, M., Rault, P., Roumier, P. H., Fortier, M., André, C., Brousseau, P., Gagné, F., Fournier, M., Surette, C. et Vaillancourt, C..
2013.
« Decrease in phagocytosis capacity of hemocyte during spawning in mytilus edulis: A pilot study ».
Journal of Xenobiotics, vol. 3, nº 11.
Fraser, Marc, Surette, Céline et Vaillancourt, Cathy.
2013.
« Fish and seafood availability in markets in the Baie des Chaleurs region, New Brunswick, Canada: A heavy metal contamination baseline study ».
Environmental Science and Pollution Research, vol. 20, nº 2.
pp. 761-770.
Fry, C., Melanson, D., Samson, C., McCausland, P. J. A., Herd, R. K., Ernst, R. E., Umoh, J. et Holdsworth, D. W..
2013.
« Physical characterization of a suite of Buzzard Coulee H4 chondrite fragments ».
Meteoritics and Planetary Science, vol. 48, nº 6.
pp. 1060-1073.
Fuentes, Alexandre, Bureau, Nathalie J., Boivin, Karine, Mezghani, Neila, Ouakrim, Youssef, de Guise, Jacques A. et Hagemeister, Nicola.
2013.
« Knee frontal plane dynamic alignment in knee osteoarthritis patients : Impact of a 12-week physical therapy program and relationship with functional scores ».
[Article de conférence]. PM and R, vol. 5, nº 9S.
S207-S208.
Gabor, Oliviu, Koreanschi, Andreea et Botez, Ruxandra.
2013.
« Optimization of an Unmanned Aerial System' Wing Using a Flexible Skin Morphing Wing ».
SAE International Journal of Aerospace, vol. 6, nº 1.
pp. 115-121.
Gadhoumi, Kais, Lina, Jean-Marc et Gotman, Jean.
2013.
« Seizure prediction in patients with mesial temporal lobe epilepsy using EEG measures of state similarity ».
Clinical Neurophysiology, vol. 124, nº 9.
pp. 1745-1754.
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2013.
« A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner ».
International Journal of Fatigue, vol. 47.
pp. 300-307.
Galy, Bertrand, Khaled, Amar et Nollet, Marie-José.
2013.
« Assessment of seismic vulnerability of typical quebec city bridges considering the site-specific amplification effects ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 40, nº 1.
pp. 1-10.
Gao, Yi, Bouix, Sylvain, Shenton, Martha et Tannenbaum, Allen.
2013.
« Sparse texture active contour ».
IEEE Transactions on Image Processing, vol. 22, nº 10.
pp. 3866-3878.
Garcia Fernandez, Angel F., Grajal, Jesus et Yeste-Ojeda, Omar A..
2013.
« Back-scattering of a helicopter with a millimeter-wave LFMCW radar ».
IEEE Transactions on Aerospace and Electronic Systems, vol. 49, nº 4.
pp. 2781-2792.
Garcia-Hernandez, Ramon, Ruz-Hernandez, Jose A., Sanchez, Edgar N. et Saad, Maarouf.
2013.
« Real-time decentralized neural control for a five DOF redundant robot ».
Intelligent Automation and Soft Computing, vol. 19, nº 1.
pp. 23-37.
Gariepy, A., Bridier, F., Hoseini, M., Bocher, Philippe, Perron, C. et Levesque, M..
2013.
« Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351 ».
Surface and Coatings Technology, vol. 219.
pp. 15-30.
Gariepy, A., Larose, S., Perron, C., Bocher, Philippe et Levesque, M..
2013.
« On the effect of the orientation of sheet rolling direction in shot peen forming ».
Journal of Materials Processing Technology, vol. 213, nº 6.
pp. 926-938.
Gariepy, A., Larose, S., Perron, C., Bocher, Philippe et Levesque, M..
2013.
« On the effect of the peening trajectory in shot peen forming ».
Finite Elements in Analysis and Design, vol. 69.
pp. 48-61.
Gaudrault, Nathaly, Hagemeister, Nicola, Poitras, Stéphane et de Guise, Jacques A..
2013.
« Comparison of knee gait kinematics of workers exposed to knee straining posture to those of non-knee straining workers ».
Gait and Posture, vol. 38, nº 2.
187–191.
Georges, T., Brailovski, Vladimir et Terriault, Patrick.
2013.
« Experimental bench for shape memory alloys actuators design and testing ».
Experimental Techniques, vol. 37, nº 6.
pp. 24-33.
Ghassemi, Nasser, Boudreau, Israel, Deslandes, Dominic et Wu, Ke.
2013.
« Millimeter-wave broadband transition of substrate integrated waveguide on high-to-low dielectric constant substrates ».
IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 3, nº 10.
pp. 1764-1770.
Ghommam, J., Mehrjerdi, H. et Saad, Maarouf.
2013.
« Robust formation control without velocity measurement of the leader robot ».
Control Engineering Practice, vol. 21, nº 8.
pp. 1143-1156.
Ghommam, Jawhar, Mahmoud, Magdi S. et Saad, Maarouf.
2013.
« Robust cooperative control for a group of mobile robots with quantized information exchange ».
Journal of the Franklin Institute, vol. 350, nº 8.
pp. 2291-2321.
Godat, Ahmed et Chaallal, Omar.
2013.
« Strut-and-tie method for externally bonded FRP shear-strengthened large-scale RC beams ».
Composite Structures, vol. 99.
pp. 327-338.
Godat, Ahmed, Chaallal, Omar et L'hady, Amar.
2013.
« Comportement des ancrages de la méthode par insertion de barres en polymères renforcés de fibres pour le renforcement en cisaillement de poutres en béton armé ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 40, nº 6.
pp. 508-516.
Godat, Ahmed, Chaallal, Omar et Neale, Kenneth W..
2013.
« Nonlinear finite element models for the embedded through-section FRP shear-strengthening method ».
Computers and Structures, vol. 119.
pp. 12-22.
Gosselin, Clément, Laliberté, Thierry, Mayer-St-Onge, Boris, Foucault, Simon, Lecours, Alexandre, Duchaine, Vincent, Paradis, Noémie, Gao, Dalong et Menassa, Roland.
2013.
« A friendly beast of burden: A human-assistive robot for handling large payloads ».
IEEE Robotics and Automation Magazine, vol. 20, nº 4.
pp. 139-147.
Goutaland, D., Winiarski, T., Lassabatere, L., Dubé, Jean-Sébastien et Angulo-Jaramillo, R..
2013.
« Sedimentary and hydraulic characterization of a heterogeneous glaciofluvial deposit: Application to the modeling of unsaturated flow ».
Engineering Geology, vol. 166.
pp. 127-139.
Gravel-Savard, Antoine, Saad, Maarouf, Lagacé, Pierre Jean, Asber, Dalal et Lefebvre, Serge.
2013.
« Power network partitioning for secondary voltage control using conditional entropy ».
International Journal of Power and Energy Systems, vol. 33, nº 1.
pp. 30-40.
Grazilhon, S., Piatyszek, E., Hausler, R. et Laforest, V..
2013.
« Needs-oriented approach for decision support of industrial wastewater management ».
WIT Transactions on Ecology and the Environment, vol. 178.
pp. 113-124.
Grigorie, T. L. et Botez, Ruxandra.
2013.
« A new method to reduce the noise of the miniaturised inertial sensors disposed in redundant linear configurations ».
Aeronautical Journal, vol. 117, nº 1188.
pp. 111-132.
Grine, Lotfi et Bouzid, Abdel-Hakim.
2013.
« Analytical and experimental studies of liquid and gas leaks through micro and nano-porous gaskets ».
Materials Sciences and Applications, vol. 4, nº 8A.
pp. 32-44.
Grine, Lotfi et Bouzid, Abdel-Hakim.
2013.
« Prediction of leak rates through porous gaskets at high temperature ».
Journal of Pressure Vessel Technology, vol. 135, nº 2.
Gruson, A., Ribardiere, M. et Cozot, R..
2013.
« Eye-centered color adaptation in global illumination ».
Computer Graphics Forum, vol. 32, nº 7.
pp. 111-120.
Guilbault, Raynald.
2013.
« A simplified thermal analysis of elastohydrodynamic contacts ».
Journal of Tribology, vol. 135, nº 2.
Guilbault, Raynald, Lalonde, Sebastien et Thomas, Marc.
2013.
« Corrigendum to "Nonlinear damping calculation in cylindrical gear dynamic modeling" [J. Sound Vib. 331/9 (2012) 2110–2128] ».
[Autre]. Journal of Sound and Vibration, vol. 332, nº 20.
p. 5240.
Haillot, Didier, Franquet, Erwin, Gibout, Stéphane et Bédécarrats, Jean-Pierre.
2013.
« Optimization of solar DHW system including PCM media ».
Applied Energy, vol. 109.
pp. 470-475.
Halabi, Ana Ximena, Montoya-Torres, Jairo R., Carolina Pirachicán, D. et Mejía, Diana.
2013.
« A modelling framework of reverse logistics practices in the Colombian plastic sector ».
International Journal of Industrial and Systems Engineering, vol. 13, nº 3.
pp. 364-387.
Hamadi, A., Rahmani, S. et Al Haddad, Kamal.
2013.
« Digital Control of a Shunt Hybrid Power Filter Adopting a Nonlinear Control Approach ».
IEEE Transactions on Industrial Informatics, vol. 9, nº 4.
pp. 2092-2104.
Hamel, Clément, Sassi, Ahmed, Botez, Ruxandra et Dartigues, Clément.
2013.
« Cessna Citation X Aircraft Global Model Identification from Flight Tests ».
SAE International Journal of Aerospace, vol. 6, nº 1.
pp. 106-114.
Hannat, Ridha, Morency, François et Decoster, Louis.
2013.
« Numerical study of a hot-air-based aircraft wing anti-icing system using the box-behnken DoE approach ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 37, nº 1.
pp. 111-128.
Harker, Matthew et O'Leary, Paul.
2013.
« Direct regularized surface reconstruction from gradients for Industrial Photometric Stereo ».
Computers in Industry, vol. 64, nº 9.
pp. 1221-1228.
Harris, Kyle, Samson, Claire et Van Geel, Paul.
2013.
« Characterization of waste density in a bioreactor landfill via microgravity and settlement analysis ».
Journal of Environmental and Engineering Geophysics, vol. 18, nº 3.
pp. 157-168.
Hébert, C., Mineau, C. et Laporte, C. Y..
2013.
« Développement d’un logiciel de réseau social orienté voyages avec la nouvelle norme ISO/CEI 29110 ».
Génie Logiciel, nº 107.
pp. 53-62.
Hebert-Davies, Jonah, Laflamme, G. Yves, Rouleau, Dominique, Canet, Fanny, Sandman, Emilie, Li, Ang et Petit, Yvan.
2013.
« A biomechanical study comparing polyaxial locking screw mechanisms ».
Injury, vol. 44, nº 10.
pp. 1358-1362.
Hedjam, Rachid et Cheriet, Mohamed.
2013.
« Historical document image restoration using multispectral imaging system ».
Pattern Recognition, vol. 46, nº 8.
pp. 2297-2312.
Henderson, Andrew D. et Demond, Avery H..
2013.
« Permeability of iron sulfide (FeS)-based materials for groundwater remediation ».
Water Research, vol. 47, nº 3.
pp. 1267-1276.
Hill, Edward, Han, David, Dumouchel, Pierre, Dehak, Najim, Quatieri, Thomas, Moehs, Charles, Oscar-Berman, Marlene, Giordano, John, Simpatico, Thomas, Barh, Debmalya et Blum, Kenneth.
2013.
« Long term SuboxoneTM emotional reactivity as measured by automatic detection in speech ».
[Article scientifique]. PLoS ONE, vol. 8, nº 7.
Hobeika, Christelle, Pichette, Simon, Ghodbane, Azeddine, Thibeault, Claude, Audet, Yves, Boland, Jean-François et Saad, Maarouf.
2013.
« Flight Control Fault Models Based on SEU Emulation ».
SAE International Journal of Aerospace, vol. 6, nº 2.
pp. 643-649.
Hoteit, Sahar, Secci, Stefano, Langar, Rami et Pujolle, Guy.
2013.
« A nucleolus-based approach for resource allocation in OFDMA wireless mesh networks ».
IEEE Transactions on Mobile Computing, vol. 12, nº 11.
pp. 2145-2154.
Im, Jean-Francois, McGuffin, Michael John et Leung, Rock.
2013.
« Gplom: The generalized plot matrix for visualizing multidimensional multivariate data ».
IEEE Transactions on Visualization and Computer Graphics, vol. 19, nº 12.
pp. 206-214.
Jaafar, Wael, Ajib, Wessam et Haccoun, David.
2013.
« Adaptive relaying scheme for cognitive radio networks ».
IET Communications, vol. 7, nº 11.
pp. 1151-1162.
Jalilian, F., Jahazi, M. et Drew, R. A. L..
2013.
« Microstructure evolution during transient liquid phase bonding of alloy 617 ».
Metallography, Microstructure, and Analysis, vol. 2, nº 3.
pp. 170-182.
Jayakumar, K. R. et Abran, Alain.
2013.
« A survey of software test estimation techniques ».
Journal of Software Engineering and Applications, vol. 6, nº 10a.
pp. 47-52.
Jiménez-Narváez, Luz-Maria, Segrera Portilla, Arturo et Gardoni, Mickaël.
2013.
« Some opportunities and limitations of the cloud computing environment: In the early stage of design process ».
International Journal of Designed Objects, vol. 6, nº 2.
pp. 1-18.
Joubair, A., Slamani, M. et Bonev, Ilian.
2013.
« Kinematic calibration of a five-bar planar parallel robot using all working modes ».
Robotics and Computer-Integrated Manufacturing, vol. 29, nº 4.
pp. 15-25.
Joubair, Ahmed et Bonev, Ilian A..
2013.
« Comparison of the efficiency of five observability indices for robot calibration ».
Mechanism and Machine Theory, vol. 70.
pp. 254-265.
Joubair, Ahmed, Nubiola, Albert et Bonev, Ilian.
2013.
« Calibration Efficiency Analysis Based on Five Observability Indices and Two Calibration Models for a Six-Axis Industrial Robot ».
SAE International Journal of Aerospace, vol. 6, nº 1.
pp. 161-168.
Kaddoum, Georges et Gagnon, François.
2013.
« Performance analysis of STBC-CSK communication system over slow fading channel ».
Signal Processing, vol. 93, nº 7.
pp. 2055-2060.
Kaddoum, Georges, Gagnon, Ghyslain et Gagnon, François.
2013.
« Spread spectrum communication system with sequence synchronization unit using chaotic symbolic dynamics modulation ».
International Journal of Bifurcation and Chaos, vol. 23, nº 2.
Kaddoum, Georges, Richardson, Francois-Dominique et Gagnon, François.
2013.
« Design and analysis of a multi-carrier differential chaos shift keying communication system ».
IEEE Transactions on Communications, vol. 61, nº 8.
pp. 3281-3291.
Kamguem, R., Djebara, A. et Songmene, Victor.
2013.
« Investigation on surface finish and metallic particle emission during machining of aluminum alloys using response surface methodology and desirability functions ».
International Journal of Advanced Manufacturing Technology, vol. 69, nº 5-8.
pp. 1283-1298.
Kamguem, Rene, Tahan, Souheil Antoine et Songmene, Victor.
2013.
« Evaluation of machined part surface roughness using image texture gradient factor ».
International Journal of Precision Engineering and Manufacturing, vol. 14, nº 2.
pp. 183-190.
Kamkar, N., Bridier, Florent, Bocher, Philippe et Jedrzejowski, P..
2013.
« Water droplet erosion mechanisms in rolled Ti-6Al-4V ».
Wear, vol. 301, nº 1-2.
pp. 442-448.
Kanaan, H. Y. et Al Haddad, Kamal.
2013.
« Modeling and multi-loop feedback control design of a SEPIC power factor corrector in single-phase rectifiers ».
Mathematics and Computers in Simulation, vol. 91.
pp. 274-283.
Kanjiya, Parag, Singh, Bhim, Chandra, Ambrish et Al-Haddad, Kamal.
2013.
« 'SRF Theory Revisited' to control self-supported dynamic voltage restorer (DVR) for unbalanced and nonlinear loads ».
IEEE Transactions on Industry Applications, vol. 49, nº 5.
pp. 2330-2340.
Karbassi, Amin et Nollet, Marie-José.
2013.
« Performance-based seismic vulnerability evaluation of masonry buildings using applied element method in a nonlinear dynamic-based analytical procedure ».
Earthquake Spectra, vol. 29, nº 2.
pp. 399-426.
Kheddache, Yasmina et Tadj, Chakib.
2013.
« Acoustic measures of the cry characteristics of healthy newborns and newborns with pathologies ».
Journal of Biomedical Science and Engineering, vol. 6, nº 8.
pp. 796-804.
Kheddache, Yasmina et Tadj, Chakib.
2013.
« Characterization of pathologic cries of newborns based on fundamental frequency estimation ».
Engineering, vol. 5, nº 10B.
pp. 272-276.
Kheddache, Yasmina et Tadj, Chakib.
2013.
« Frequential characterization of healthy and pathologic newborns cries ».
American Journal of Biomedical Engineering, vol. 3, nº 6.
pp. 182-193.
Khettabi, R., Fatmi, L., Masounave, Jacques et Songmene, Victor.
2013.
« On the micro and nanoparticle emission during machining of titanium and aluminum alloys ».
CIRP Journal of Manufacturing Science and Technology, vol. 6, nº 3.
pp. 175-180.
Kidar, Thameur, Thomas, Marc, Guilbault, Raynald et Mohamed, El Badaoui.
2013.
« Comparison between the efficiency of L.M.D and E.M.D algorithms for early detection of gear defects ».
Mechanics and Industry, vol. 14, nº 2.
pp. 121-127.
Kikinis, Z., Makris, N., Finn, C. T., Bouix, S., Lucia, D., Coleman, M. J., Tworog-Dube, E., Kikinis, R., Kucherlapati, R., Shenton, M. E. et Kubicki, M..
2013.
« Genetic contributions to changes of fiber tracts of ventral visual stream in 22q11.2 deletion syndrome ».
Brain Imaging and Behavior, vol. 7, nº 3.
pp. 316-325.
Ko, Albert H. R., Sabourin, Robert et Gagnon, François.
2013.
« Performance of distributed multi-agent multi-state reinforcement spectrum management using different exploration schemes ».
Expert Systems with Applications, vol. 40, nº 10.
pp. 4115-4126.
Ko, Albert Hung-Ren et Sabourin, Robert.
2013.
« Single Classifier-based Multiple Classification Scheme for weak classifiers: An experimental comparison ».
Expert Systems with Applications, vol. 40, nº 9.
pp. 3606-3622.
Kouam, Jules, Songmene, Victor et Bahloul, Ali.
2013.
« Experimental investigation on PM2.5 particle emission during polishing of granite ».
Health, vol. 5, nº 10A2.
pp. 29-35.
Kouam, Jules, Songmene, Victor, Zedan, Yasser, Djebara, AbdelHakim et Khettabi, Riad.
2013.
« On chip formation during drilling of cast aluminum alloys ».
Machining Science and Technology, vol. 17, nº 2.
pp. 228-245.
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir.
2013.
« Analytical modelling and control of a hybrid manufacturing/remanufacturing system ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 46, nº 9.
pp. 401-406.
Kouraogo, Pegdwindé Justin, Dziong, Zbigniew, Haidar, Mohamad et Gagnon, François.
2013.
« Rate management in multiuser detection based MAC design for ad hoc networks ».
Ad Hoc Networks, vol. 11, nº 1.
pp. 1-18.
Kpodjedo, Sègla Jean-Luc, Ricca, Filippo, Galinier, Philippe, Antoniol, Giuliano et Gueheneuc, Yann-Gaël.
2013.
« MADMatch: many-to-many approximate diagram matching for design comparison ».
IEEE Transactions on Software Engineering, vol. 39, nº 8.
pp. 1090-1111.
Kpodjedo, Segla, Ricca, Filippo, Galinier, Philippe, Antoniol, Giuliano et Gúeh́eneuc, Yann-Gaël.
2013.
« Studying software evolution of large object-oriented software systems using an ETGM algorithm ».
[Article de conférence]. Journal of software: Evolution and Process, vol. 25, nº 2.
pp. 139-163.
Kreitcberg, A., Brailovski, V., Prokoshkin, S., Facchinello, Y., Inaekyan, К et Dubinskiy, S..
2013.
« Microstructure and functional fatigue of nanostructured Ti–50.26 at%Ni alloy after thermomechanical treatment with warm rolling and intermediate annealing ».
Materials Science and Engineering: A, vol. 562.
pp. 118-127.
Laflamme-Mayer, Nicolas, Andre, Walder, Valorge, Olivier, Blaquière, Yves et Sawan, Mohamad.
2013.
« Configurable input-output power pad for wafer-scale microelectronic systems ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 21, nº 11.
pp. 2024-2033.
Lalonde, Nadine Michele, Petit, Yvan, Aubin, Carl-Éric, Wagnac, Éric et Arnoux, Pierre-Jean.
2013.
« Method to geometrically personalize a detailed finite-element model of the Spine ».
IEEE Transactions on Biomedical Engineering, vol. 60, nº 7.
pp. 2014-2021.
Lamarche, Louis.
2013.
« Short-term behavior of classical analytic solutions for the design of ground-source heat pumps ».
Renewable Energy, vol. 57.
pp. 171-180.
Lamraoui, Faycal, Fortin, Guy, Benoit, Robert, Perron, Jean et Masson, Christian.
2013.
« Atmospheric icing severity: Quantification and mapping ».
Atmospheric Research, vol. 128.
pp. 57-75.
Laporte, Claude Y., O'Connor, Rory V. et Fanmuy, Gauthier.
2013.
« International systems and software engineering standards for very small entities ».
CrossTalk : The Journal of Defense Software Engineering, vol. 26, nº 3.
pp. 28-33.
Larregain, Benjamin, Vanderesse, Nicolas, Bridier, Florent, Bocher, Philippe et Arkinson, Patrick.
2013.
« Method for accurate surface temperature measurements during fast induction heating ».
[Article de conférence]. Journal of Materials Engineering and Performance, vol. 22, nº 7.
pp. 1907-1913.
Lateb, M., Masson, Christian, Stathopoulos, T. et Bédard, Claude.
2013.
« Comparison of various types of k- models for pollutant emissions around a two-building configuration ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 115.
pp. 9-21.
Leclaire, P., Dupont, T. et Panneton, R..
2013.
« Acoustics of porous materials with partially opened porosity ».
Journal of the Acoustical Society of America, vol. 134, nº 6.
pp. 4630-4641.
Lejeune, Michel.
2013.
« La communauté de pratique : au carrefour des notions de groupe informel et de transmission des savoirs tacites ».
Psychologie du Travail et des Organisations, vol. 19, nº 4.
pp. 404-419.
Lejeune, Michel.
2013.
« Régimes institutionnels et modèles nationaux de la qualification professionnelle en Europe et en Amérique du Nord : vers un modèle communautaire de la mobilité da la main-d’œuvre ».
Innovation RICEC, vol. 4, nº 1.
Lemaire, R., Bejaoui, S. et Therssen, E..
2013.
« Study of soot formation during the combustion of Diesel, rapeseed methyl ester and their surrogates in turbulent spray flames ».
Fuel, vol. 107.
pp. 147-161.
Lemieux, P. O., Tétreault, P., Hagemeister, Nicola et Nuño, Natalia.
2013.
« Influence of prosthetic humeral head size and medial offset on the mechanics of the shoulder with cuff tear arthropathy: A numerical study ».
Journal of Biomechanics, vol. 46, nº 4.
pp. 806-812.
Lemieux, Pierre Olivier, Hagemeister, Nicola, Tétreault, Patrice et Nuño, Natalia.
2013.
« Influence of the medial offset of the proximal humerus on the glenohumeral destabilising forces during arm elevation: a numerical sensitivity study ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 16, nº 1.
pp. 103-111.
Levasseur, Annie, Lesage, Pascal, Margni, Manuele et Samson, Réjean.
2013.
« Biogenic carbon and temporary storage addressed with dynamic life cycle assessment ».
Journal of Industrial Ecology, vol. 17, nº 1.
pp. 117-128.
Levesque, M., David, Éric et Hudon, C..
2013.
« Effect of surface conditions on the electric field in air cavities ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, nº 1.
pp. 71-81.
Li, Li.
2013.
« A new concept of backfill design - Application of wick drains in backfilled stopes ».
International Journal of Mining Science and Technology, vol. 23, nº 5.
pp. 763-770.
Li, Li, Alvarez, I. C. et Aubertin, J. D..
2013.
« Self-weight consolidation of slurried deposition: tests and interpretation ».
International Journal of Geotechnical Engineering, vol. 7, nº 2.
pp. 205-213.
Li, Li, Dubé, Jean-Sébastien et Aubertin, Michel.
2013.
« An Extension of Marston's Solution for the Stresses in Backfilled Trenches with Inclined Walls ».
Geotechnical and Geological Engineering, vol. 31, nº 4.
pp. 1027-1039.
Li, Zhi, Brissette, François et Chen, Jie.
2013.
« Finding the most appropriate precipitation probability distribution for stochastic weather generation and hydrological modelling in Nordic watersheds ».
Hydrological Processes, vol. 27, nº 25.
pp. 3718-3729.
Liu, Fuchun et Dziong, Zbigniew.
2013.
« Reliable decentralized control of fuzzy discrete-event systems and a test algorithm ».
IEEE Transactions on Cybernetics, vol. 43, nº 1.
pp. 321-331.
Louafi, Habib, Coulombe, Stéphane et Chandra, Umesh.
2013.
« Quality prediction-based dynamic content adaptation framework applied to collaborative mobile presentations ».
IEEE Transactions on Mobile Computing, vol. 12, nº 10.
pp. 2024-2036.
Loyka, Sergey, Kostina, Victoria et Gagnon, François.
2013.
« On convexity of error rates in digital communications ».
IEEE Transactions on Information Theory, vol. 59, nº 10.
pp. 6501-6516.
Ma, Xin, Benavides, Jaime, Haughn, Chelsea R., Xu, Fan, Doty, Matthew F. et Cloutier, Sylvain G..
2013.
« High polymer-LEDs enhancement by exciton-plasmon coupling using encapsulated metallic nanoparticles ».
Organic Electronics: physics, materials, applications, vol. 14, nº 7.
pp. 1916-1923.
Mah, Jason, Samson, Claire, McKinnon, Stephen D. et Thibodeau, Denis.
2013.
« 3D laser imaging for surface roughness analysis ».
International Journal of Rock Mechanics and Mining Sciences, vol. 58.
pp. 111-117.
Mahmoud, Alaa Y., Zhang, Jianming, Ma, Dongling, Izquierdo, Ricardo et Truong, Vo-Van.
2013.
« Thickness dependent enhanced efficiency of polymer solar cells with gold nanorods embedded in the photoactive layer ».
Solar Energy Materials and Solar Cells, vol. 116.
pp. 1-8.
Maîtrejean, Guillaume, Terriault, Patrick et Brailovski, Vladimir.
2013.
« Density dependence of the macroscale superelastic behavior of porous shape memory alloys: a two-dimensional approach ».
Smart Materials Research, vol. 2013.
Maitrejean, Guillaume, Terriault, Patrick et Brailovski, Vladimir.
2013.
« Density dependence of the superelastic behavior of porous shape memory alloys: Representative Volume Element and scaling relation approaches ».
Computational Materials Science, vol. 77.
pp. 93-101.
Maldar, A. R., Ebrahimi, G. R., Haghshenas, Meysam, Jahazi, M. et Bocher, P..
2013.
« Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps ».
Journal of Materials Engineering and Performance, vol. 22, nº 11.
pp. 3306-3314.
Malekabadi, Ali, Charlebois, Serge A. et Deslandes, Dominic.
2013.
« Parallel plate waveguide with anisotropic graphene plates: effect of electric and magnetic biases ».
Journal of Applied Physics, vol. 113, nº 11.
Malekabadi, S. Ali, Boone, Francois, Charlebois, Serge A. et Deslandes, Dominic.
2013.
« Powerful applications of electromagnetic field simulators: field visualization for education ».
IEEE Microwave Magazine, vol. 14, nº 2.
pp. 99-105.
Mantelet, Guillaume, Cassidy, Andrew, Tremblay, Christine, Plant, David V., Littlewood, Paul et Belanger, Michel P..
2013.
« Establishment of dynamic lightpaths in filterless optical networks ».
Journal of Optical Communications and Networking, vol. 5, nº 9.
pp. 1057-1065.
Mantelet, Guillaume, Tremblay, Christine, Plant, David, Littlewood, Paul et Bélanger, Michel.
2013.
« PCE-based centralized control plane for filterless networks ».
IEEE Communications Magazine, vol. 51, nº 5.
pp. 128-135.
Marin, Beatriz, Giachetti, Giovanni, Pastor, Oscar, Vos, Tanja E. J. et Abran, Alain.
2013.
« Using a functional size measurement procedure to evaluate the quality of models in MDD environments ».
ACM Transactions on Software Engineering and Methodology, vol. 22, nº 3.
Martins, J., Oliveira, L. S., Nisgoski, S. et Sabourin, R..
2013.
« A database for automatic classification of forest species ».
Machine Vision and Applications, vol. 24, nº 3.
pp. 567-578.
Maubant, Philippe, Roger, Lucie et Lejeune, Michel.
2013.
« « Déprofessionnalisation » ».
Recherche & formation, vol. 72, nº 1.
pp. 89-102.
Mazur, Kuba et Voix, Jérémie.
2013.
« A case-study on the continuous use of an in-ear dosimetric device ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 133, nº 5.
p. 3274.
McCann, Fannie, Canet, Fanny, Sandman, Emilie, Petit, Yvan et Rouleau, Dominique M..
2013.
« Does radiographic beam angle affect the radiocapitellar ratio measurement of subluxation in the elbow? ».
Clinical Orthopaedics and Related Research, vol. 471, nº 8.
pp. 2556-2562.
McLeod, T., Samson, C., Labrie, M., Shehata, K., Mah, J., Lai, P., Wang, L. et Elder, J. H..
2013.
« Using video acquired from an unmanned aerial vehicle (UAV) to measure fracture orientation in an open-PIT mine ».
Geomatica, vol. 67, nº 3.
pp. 173-180.
Mehrjerdi, Hasan, Ghahremani, Esmaeil, Lefebvre, Serge, Saad, Maarouf et Asber, Dalal.
2013.
« Authenticated voltage control of partitioned power networks with optimal allocation of STATCOM using heuristic algorithm ».
IET Generation, Transmission and Distribution, vol. 7, nº 9.
pp. 1037-1045.
Mehrjerdi, Hasan, Lefebvre, Serge, Saad, Maarouf et Asber, Dalal.
2013.
« A decentralized control of partitioned power networks for voltage regulation and prevention against disturbance propagation ».
IEEE Transactions on Power Systems, vol. 28, nº 2.
pp. 1461-1469.
Mehrjerdi, Hasan, Lefebvre, Serge, Saad, Maarouf et Asber, Dalal.
2013.
« Coordinated control strategy considering effect of neighborhood compensation for voltage improvement in transmission systems ».
IEEE Transactions on Power Systems, vol. 28, nº 4.
pp. 4507-4515.
Mehrtash, M., Rousse, Daniel R. et Quesada, G..
2013.
« Effects of surroundings snow coverage and solar tracking on photovoltaic systems operating in Canada ».
Journal of Renewable and Sustainable Energy, vol. 5, nº 5.
Ménard, Jérémie, Émard, Maxime, Canet, Fanny, Brailovski, Vladimir, Petit, Yvan et Laflamme, George Y..
2013.
« Initial tension loss in cerclage cables ».
The Journal of Arthroplasty, vol. 28, nº 9.
pp. 1509-1512.
Mencia-Oliva, Beatriz, Grajal, Jesus, Yeste-Ojeda, Omar A., Rubio-Cidre, Gorka et Badolato, Alejandro.
2013.
« Low-cost CW-LFM radar sensor at 100 GHz ».
IEEE Transactions on Microwave Theory and Techniques, vol. 61, nº 2.
pp. 986-998.
Merabtine, Abdelatif, Benelmir, Riad et Ganaoui, Mohammed el.
2013.
« Pseudo-bond graph model for the analysis of the thermal behaviour of buildings ».
Thermal Science, vol. 17, nº 3.
pp. 723-732.
Meunier, Mathieu, Perraton, Daniel et Di Benedetto, Herve.
2013.
« Modelling of permanent strain of asphalt concrete using the ESSO model ».
Road Materials and Pavement Design, vol. 14, nº 4.
pp. 864-887.
Mezghani, Neila, Fuentes, Alexandre, Gaudreault, Nathaly, Mitiche, Amar, Aissaoui, Rachid, Hagemeister, Nicola et de Guise, Jacques A..
2013.
« Identification of knee frontal plane kinematic patterns in normal gait by principal component analysis ».
Journal of Mechanics in Medicine and Biology, vol. 13, nº 3.
Miles, Brandon, Ben Ayed, Ismail, Law, Max W. K., Garvin, Greg, Fenster, Aaron et Li, Shuo.
2013.
« Spine image fusion via graph cuts ».
IEEE Transactions on Biomedical Engineering, vol. 60, nº 7.
pp. 1841-1850.
Mollaiyan, Kaveh, Santerre, Rock et Landry, René Jr..
2013.
« Acquisition of weak signals in multi-constellation frequency domain receivers ».
Positioning, vol. 4, nº 2.
pp. 144-152.
Monfet, Danielle et Zmeureanu, Radu.
2013.
« Calibration of a central cooling plant model using manufacturer's data and measured input parameters and comparison with measured performance ».
Journal of Building Performance Simulation, vol. 6, nº 2.
pp. 141-155.
Moreau, A., Toubal, L., Bocher, Philippe, Humbert, M., Uta, E. et Gey, N..
2013.
« Evaluation of macrozone dimensions by ultrasound and EBSD techniques ».
Materials Characterization, vol. 75.
pp. 115-128.
Morin, Suzanne N., Godbout, Benoit, Wall, Michelle, Belzile, Etienne L., Michou, Laëtitia, Ste-Marie, Louis-Georges, Karaplis, Andrew C., de Guise, Jacques A. et Brown, Jacques P..
2013.
« Femur geometrical parameters in the pathogenesis of atypical femur fractures ».
[Résumé d'une communication à une conférence]. Bone Abstracts, vol. 1.
Morin, Suzanne, Godbout, Benoit, Wall, Michelle, Belzile, Etienne, Moser, Thomas et de Guise, Jacques.
2013.
« Lower limb geometrical parameters in the pathogenesis of bisphosphonate - associated atypical femur fractures ».
[Résumé d'une communication à une conférence]. Journal of Bone and Mineral Research, vol. 28, nº S1.
S32-S33.
Motamedi, Ali, Soltani, Mohammad Mostafa et Hammad, Amin.
2013.
« Localization of RFID-equipped assets during the operation phase of facilities ».
Advanced Engineering Informatics, vol. 27, nº 4.
pp. 566-579.
Nadeau, Sylvie, Bouchard, Michèle, Debia, Maximilien, DeMarcellis-Warin, Nathalie, Hallé, Stéphane, Songmene, Victor, Therrien, Marie-Christine, Wilkinson, Kevin, Ateme-Nguema, Barthelemy, Dufour, Genevieve, Dufresne, André, Fatisson, Julien, Haddad, Sami, Hadioui, Madjid, Kouam, Jules, Morency, François, Tardif, Robert, Viens, Martin, Weichenthal, Scott, Viau, Claude et Camus, Michel.
2013.
« EquiNanos: innovative team for nanoparticle risk management ».
Nanomedicine : Nanotechnology, Biology and Medicine, vol. 9, nº 1.
pp. 22-24.
Nadeau, Sylvie, Fatisson, J., Badri, A. et Emami-Mehrgani, B..
2013.
« From serious shortage of researchers to OHS law changes and growing industrial needs: a dynamic and quiet force ».
Relations Industrielles / Industrial Relations, vol. 68, nº 4.
pp. 608-622.
Nambakhsh, Cyrus M. S., Jing, Yuan, Punithakumar, Kumaradevan, Goela, Aashish, Rajchl, Martin, Peters, Terry M. et Ben Ayed, Ismail.
2013.
« Left ventricle segmentation in MRI via convex relaxed distribution matching ».
Medical Image Analysis, vol. 17, nº 8.
pp. 1010-1024.
Nault, Marie-Lyne, Mac-Thiong, Jean-Marc, Roy-Beaudry, Marjolaine, deGuise, Jacques, Labelle, Hubert et Parent, Stefan.
2013.
« Three-dimensional spine parameters can differentiate between progressive and nonprogressive patients with ais at the initial visit: A retrospective analysis ».
Journal of Pediatric Orthopaedics, vol. 33, nº 6.
pp. 617-622.
Nguyen, C. T., Dolez, Patricia, Vu-Khanh, Toan, Gauvin, C. et Lara, J..
2013.
« Effect of protective glove use conditions on their resistance to needle puncture ».
[Article de conférence]. Plastics, Rubber and Composites, vol. 42, nº 5.
pp. 187-193.
Nguyen, Kim Khoa et Jaumard, Brigitte.
2013.
« A MPLS/LDP distributed architecture for next generation routers ».
Journal of Network and Systems Management, vol. 21, nº 4.
pp. 535-561.
Nguyen, Kim-Khoa et Cheriet, Mohamed.
2013.
« Enabling infrastructure as a service (IaaS) on IP networks: From distributed to virtualized control plane ».
IEEE Communications Magazine, vol. 51, nº 1.
pp. 136-144.
Nguyen, Kim-Khoa, Cheriet, Mohamed, Lemay, Mathieu, Savoie, Michel et Ho, Bobby.
2013.
« Powering a data center network via renewable energy: A green testbed ».
IEEE Internet Computing, vol. 17, nº 1.
pp. 40-49.
Nguyen-Tri, Phuong, Domeneck, Sandra, Guinault, Alain et Sollogoub, Cyrille.
2013.
« Crystallization behavior of Poly(lactide)/Poly(b-hydroxybutyrate)/Talc Composites ».
Journal of Applied Polymer Science, vol. 129, nº 6.
pp. 3355-3365.
Nikiema, Josiane, Cofie, Olufunke, Impraim, Robert et Adamtey, Noah.
2013.
« Processing of fecal sludge to fertilizer pellets using a low-cost technology in Ghana ».
Environment and Pollution, vol. 2, nº 4.
Nikiema, Josiane, Figoli, Alberto, Weissenbacher, Norbert, Langergraber, Gunter, Marrot, Benoit et Moulin, Philippe.
2013.
« Wastewater treatment practices in Africa - experiences from seven countries ».
[Article de conférence]. Sustainable Sanitation Practice, vol. 14, nº 1.
pp. 26-34.
Niknam, S. A. et Songmene, Victor.
2013.
« Modeling of burr thickness in milling of ductile materials ».
International Journal of Advanced Manufacturing Technology, vol. 66, nº 9-12.
pp. 2029-2039.
Niknam, S. A., Songmene, Victor et Au, Y. H. J..
2013.
« The use of acoustic emission information to distinguish between dry and lubricated rolling element bearings in low-speed rotating machines ».
International Journal of Advanced Manufacturing Technology, vol. 69, nº 9-12.
pp. 2679-2689.
Niknam, Seyed Ali et Songmene, Victor.
2013.
« Factors governing burr formation during high-speed slot milling of wrought aluminum alloys ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, nº 8.
pp. 1165-1179.
Niknam, Seyed Ali et Songmene, Victor.
2013.
« Simultaneous optimization of burrs size and surface finish when milling 6061-T6 aluminium alloy ».
International Journal of Precision Engineering and Manufacturing, vol. 14, nº 8.
pp. 1311-1320.
Niknam, Seyed Ali, Songmene, Victor et Au, Y. H. Joe.
2013.
« Proposing a new acoustic emission parameter for bearing condition monitoring in rotating machines ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 37, nº 4.
pp. 1105-1114.
Nóbrega Júnior, Claudino Lins et Melhado, Silvio Burratino.
2013.
« Coordenador de projetos de edificações: Estudo e proposta para perfil, atividades e autonomia ».
Gestão & Tecnologia de Projetos, vol. 1, nº 8.
pp. 69-89.
Noël, Alexandra, Cloutier, Yves, Wilkinson, Keven James, Dion, Chantal, Hallé, Stéphane, Maghni, Karim, Tardif, Robert et Truchon, Ginette.
2013.
« Generating nano-aerosols from TiO2 (5 nm) nanoparticles showing different agglomeration states : application to toxicological studies ».
Journal of Occupational and Environmental Hygiene, vol. 10, nº 2.
pp. 86-96.
Nubiola, Albert et Bonev, Ilian A..
2013.
« Absolute calibration of an ABB IRB 1600 robot using a laser tracker ».
Robotics and Computer-Integrated Manufacturing, vol. 29, nº 1.
pp. 236-245.
Nubiola, Albert, Slamani, Mohamed et Bonev, Ilian A..
2013.
« A new method for measuring a large set of poses with a single telescoping ballbar ».
Precision Engineering, vol. 37, nº 2.
pp. 451-460.
Okou, F. A., Akhrif, Ouassima, Dessaint, Louis A. et Bouchard, D..
2013.
« A Decentralized Multivariable Robust Adaptive Voltage and Speed Regulator for Large-scale Power Systems ».
International Journal of Emerging Electric Power Systems, vol. 14, nº 1.
pp. 41-56.
Ouaret, Samir, Polotski, Vladimir, Kenné, Jean-Pierre et Gharbi, Ali.
2013.
« Manufacturing-remanufacturing failure-prone systems under random demands ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 46, nº 9.
pp. 1620-1625.
Ould-Brahim, Nazim, Bouzid, Abdel-Hakim et Brailovski, Vladimir.
2013.
« On the use of shape memory alloy studs to recover load loss in bolted joints ».
Journal of Pressure Vessel Technology, vol. 135, nº 2.
Ouni, Ali, Kessentini, Marouane, Sahraoui, Houari et Boukadoum, Mounir.
2013.
« Maintainability defects detection and correction: A multi-objective approach ».
Automated Software Engineering, vol. 20, nº 1.
pp. 47-79.
Palma, Francis, Nayrolles, Mathieu, Moha, Naouel, Guéhéneuc, Yann-Gäel, Baudry, Benoit et Jézéquel, Jean-Marc.
2013.
« SOA antipatterns: An approach for their specification and detection ».
[Article de conférence]. International Journal of Cooperative Information Systems, vol. 22, nº 4.
Pandey, Priyanka, Gleeson, Tom et Baraër, Michel.
2013.
« Toward quantifying discrete groundwater discharge from frozen seepage faces using thermal infrared images ».
Geophysical Research Letters, vol. 40, nº 1.
pp. 123-127.
Parent, Stefan, Nault, Marie-Lyne, Mac-Thiong, Jean-Marc, Roy-Beaudry, Marjolaine, Turgeon, Isabelle, Labelle, Hubert et De Guise, Jacques.
2013.
« Un nouveau modèle prédictif de la progression de la scoliose idiopathique de l’adolescent basé sur des paramètres 3D mesurés à la première visite : Résultats d’une étude prospective de 6 ans ».
[Résumé d'une communication à une conférence]. Revue de Chirurgie Orthopédique et Traumatologique, vol. 99, nº 7, Suppl..
S369.
Parzysz, F., Vu, M. et Gagnon, François.
2013.
« Energy Minimization for the Half-Duplex Relay Channel with Decode-Forward Relaying ».
IEEE Transactions on Communications, vol. 61, nº 6.
pp. 2232-2247.
Percec, Virgil, Leowanawat, Pawaret, Sun, Hao-Jan, Kulikov, Oleg, Nusbaum, Christopher D., Tran, Tam M., Bertin, Annabelle, Wilson, Daniela A., Peterca, Mihai, Zhang, Shaodong, Kamat, Neha P., Vargo, Kevin, Moock, Diana, Johnston, Eric D., Hammer, Daniel A., Pochan, Darrin J., Chen, Yingchao, Chabre, Yoann M., Shiao, Tze C., Bergeron-Brlek, Milan, André, Sabine, Roy, René, Gabius, Hans- J. et Heiney, Paul A..
2013.
« Modular synthesis of amphiphilic Janus glycodendrimers and their self-assembly into glycodendrimersomes and other complex architectures with bioactivity to biomedically relevant lectins ».
Journal of the American Chemical Society, vol. 135, nº 24.
pp. 9055-9077.
Pham, Xuan-Tan.
2013.
« Two-dimensional rosenthal moving heat source analysis using the meshless element free Galerkin method ».
Numerical Heat Transfer; Part A: Applications, vol. 63, nº 11.
pp. 807-823.
Phan, Philippe, Mezghani, Neila, Wai, Eugene K., de Guise, Jacques et Labelle, Hubert.
2013.
« Artificial neural networks assessing adolescent idiopathic scoliosis: comparison with Lenke classification ».
The Spine Journal, vol. 13, nº 11.
pp. 1527-1533.
Prokoshkin, S., Brailovski, Vladimir, Korotitskiy, A., Inaekyan, K., Dubinskiy, S., Filonov, M. et Petrzhik, M..
2013.
« Formation of nanostructures in thermomechanically-treated Ti-Ni and Ti-Nb-(Zr, Ta) SMAs and their roles in martensite crystal lattice changes and mechanical behavior ».
Journal of Alloys and Compounds, vol. 577.
pp. 418-422.
Punithakumar, Kumaradevan, Ben Ayed, Ismail, Islam, Ali, Goela, Aashish, Ross, Ian G., Chong, Jaron et Li, Shuo.
2013.
« Regional heart motion abnormality detection: An information theoretic approach ».
Medical Image Analysis, vol. 17, nº 3.
pp. 311-324.
Qadoumi, Zena, Senior, James, Bergeron-Brlek, Milan et Britton, Robert.
2013.
« Direct access to iminosugars through an interrupted kondrat'eva reaction ».
Synlett, vol. 24, nº 18.
pp. 2427-2430.
Qasaimeh, Malik et Abran, Alain.
2013.
« An audit model for ISO 9001 traceability requirements in agile-XP environments ».
Journal of Software, vol. 8, nº 7.
pp. 1556-1567.
Quttoum, Ahmad Nahar, Jarray, Abdallah, Otrok, Hadi et Dziong, Zbigniew.
2013.
« An optimal dynamic resources partitioning auction model for virtual private networks ».
Telecommunication Systems, vol. 53, nº 4.
pp. 401-414.
Rabil, Bassem S., Tliba, Safa, Granger, Éric et Sabourin, Robert.
2013.
« Securing high resolution grayscale facial captures using a blockwise coevolutionary GA ».
Expert Systems with Applications, vol. 40, nº 17.
pp. 6693-6706.
Radvar-Esfahlan, H. et Tahan, S.-Antoine.
2013.
« Performance study of dimensionality reduction methods for metrology of nonrigid mechanical parts ».
International Journal of Metrology and Quality Engineering, vol. 4, nº 3.
pp. 193-200.
Rahman, Mohammad H., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, Philippe S..
2013.
« Control of an exoskeleton robot arm with sliding mode exponential reaching law ».
International Journal of Control, Automation and Systems, vol. 11, nº 1.
pp. 92-104.
Rahmani, S., Hamadi, Ab, Al Haddad, Kamal et Alolah, A. I..
2013.
« A DSP-based implementation of an instantaneous current control for a three-phase shunt hybrid power filter ».
Mathematics and Computers in Simulation, vol. 91.
pp. 229-248.
Ramdenee, Drishtysingh, Ilinca, Adrian, Minea, Sorin Ion et Hussein, Ibrahim.
2013.
« Modelling of aerodynamic flutter on a NACA 4412 airfoil with application to wind turbine blades ».
International Journal of Simulation and Process Modelling, vol. 8, nº 1.
pp. 79-87.
Raymond, J. et Lamarche, Louis.
2013.
« Simulation of thermal response tests in a layered subsurface ».
Applied Energy, vol. 109.
pp. 293-301.
Reimeringer, M., Nuño, Natalia, Desmarais-Trépanier, C., Lavigne, M. et Vendittoli, P. A..
2013.
« The influence of uncemented femoral stem length and design on its primary stability: a finite element analysis ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 16, nº 11.
pp. 1221-1231.
Reimeringer, Michael et Nuno, Natalia.
2013.
« Evaluation of the micromotion as a function of the area where press-fit is applied for a cementless hip implant ».
[Résumé d'une communication à une conférence]. Orthopaedic proceedings, vol. 95-B, nº suppl. 34.
p. 158.
Reinhardt, Carsten, Evlyukhin, Andrey B., Wei, Cheng, Birr, Tobias, Markov, Andrey, Ung, Bora, Skorobogatiy, Maksim et Chichkov, Boris N..
2013.
« Bandgap-confined large-mode waveguides for surface plasmon-polaritons ».
Journal of the Optical Society of America B: Optical Physics, vol. 30, nº 11.
pp. 2898-2905.
Rezazadeh, Soroosh et Coulombe, Stéphane.
2013.
« A novel discrete wavelet transform framework for full reference image quality assessment ».
Signal, Image and Video Processing, vol. 7, nº 3.
pp. 559-573.
Ribas, F. C., Oliveira, L. S., Britto, A. S. et Sabourin, Robert.
2013.
« Handwritten digit segmentation: a comparative study ».
International Journal on Document Analysis and Recognition, vol. 16, nº 2.
pp. 127-137.
Rivard, Dominique, Granger, Éric et Sabourin, Robert.
2013.
« Multi-feature extraction and selection in writer-independent off-line signature verification ».
International Journal on Document Analysis and Recognition, vol. 16, nº 1.
pp. 83-103.
Rivera-Gomez, Hector, Gharbi, Ali et Kenné, Jean Pierre.
2013.
« Joint control of production, overhaul, and preventive maintenance for a production system subject to quality and reliability deteriorations ».
International Journal of Advanced Manufacturing Technology, vol. 69, nº 9-12.
pp. 2111-2130.
Rivera-Gomez, Hector, Gharbi, Ali et Kenné, Jean-Pierre.
2013.
« Joint production and major maintenance planning policy of a manufacturing system with deteriorating quality ».
International Journal of Production Economics, vol. 146, nº 2.
pp. 575-587.
Rivera-Gomez, Hector, Gharbi, Ali et Kenné, Jean-Pierre.
2013.
« Production and quality control policies for deteriorating manufacturing system ».
International Journal of Production Research, vol. 51, nº 11.
pp. 3443-3462.
Rivest-Henault, David et Cheriet, Mohamed.
2013.
« 3-D curvilinear structure detection filter via structure-ball analysis ».
IEEE Transactions on Image Processing, vol. 22, nº 7.
pp. 2849-2863.
Rizi, A. Saboktakin, Hedayatrasa, S., Maldague, X. et Vu-Khanh, Toan.
2013.
« FEM modeling of ultrasonic vibrothermography of a damaged plate and qualitative study of heating mechanisms ».
Infrared Physics and Technology, vol. 61.
pp. 101-110.
Robati, M., Carter, Alan et Perraton, Daniel.
2013.
« Repeatability and reproducibility of micro-surfacing mixture design tests and effect of aggregates surface areas on test results ».
Australian Journal of Civil Engineering, vol. 11, nº 1.
pp. 41-55.
Robati, Masoud, Carter, Alan et Perraton, Daniel.
2013.
« Evaluation of test methods and selection of aggregate grading for type III application of micro-surfacing ».
International Journal on Pavement Engineering & Asphalt Technology, vol. 14, nº 2.
pp. 11-66.
Robichaud, Alexandre, Boudreault, Martin et Deslandes, Dominic.
2013.
« Theoretical analysis of resonant wireless power transmission links composed of electrically small loops ».
Progress in Electromagnetics Research, vol. 143.
pp. 485-501.
Rodriguez, Luis Fajardo et Botez, Ruxandra Mihaela.
2013.
« Generic new modeling technique for turbofan engine thrust ».
[Article de conférence]. Journal of Propulsion and Power, vol. 29, nº 6.
pp. 1492-1494.
Rojo, Gabriel, Glaus, Mathias, Laforest, Valérie, Bourgois, Jacques et Hausler, Robert.
2013.
« Dynamic Waste Management (DWM): Towards an evolutionary decision-making approach ».
Waste Management and Research, vol. 31, nº 12.
Ropagnol, X., Blanchard, F., Ozaki, T. et Reid, M..
2013.
« Intense terahertz generation at low frequencies using an interdigitated ZnSe large aperture photoconductive antenna ».
Applied Physics Letters, vol. 103, nº 16.
Rufiange, S. et McGuffin, Michael John.
2013.
« DiffAni: Visualizing Dynamic Graphs with a Hybrid of Difference Maps and Animation ».
IEEE Transactions on Visualization and Computer Graphics, vol. 19, nº 12.
pp. 2556-2565.
Ruiz-Vargas, J., Siredey-Schwaller, N., Bocher, Philippe et Hazotte, A..
2013.
« First melting stages during isothermal brazing, of Ni/BNi-2 couples ».
Journal of Materials Processing Technology, vol. 213, nº 12.
pp. 2074-2080.
Ryklina, E. P., Prokoshkin, S. D. et Kreytsberg, A. Y..
2013.
« Abnormally high recovery strain in Ti-Ni-based shape memory alloys ».
[Article de conférence]. Journal of Alloys and Compounds, vol. 577, nº Suppl. 1.
S255-S258.
Saad, Mohamad, Akhrif, Ouassima et Saydy, Lahcen.
septembre 2013.
« Analytical model of one flexible link system with nonlinear kinematics ».
Journal of Vibration and Control, vol. 19, nº 12.
pp. 1795-1806.
Sadi, Roberta K., Fechine, Guilhermino J. M. et Demarquette, Nicole R..
2013.
« Effect of prior photodegradation on the biodegradation of polypropylene/poly(3-hydroxybutyrate) blends ».
Polymer Engineering and Science, vol. 53, nº 10.
pp. 2109-2122.
Sagol, Ece, Reggio, Marcelo et Ilinca, Adrian.
2013.
« Issues concerning roughness on wind turbine blades ».
Renewable and Sustainable Energy Reviews, vol. 23.
pp. 514-525.
Samet, Saeed, Miri, Ali et Granger, Éric.
2013.
« Incremental learning of privacy-preserving Bayesian networks ».
Applied Soft Computing, vol. 13, nº 8.
pp. 3657-3667.
Samir, Ouaret, Vladimir, Polotski, Jean-Pierre, Kenné et Ali, Gharbi.
2013.
« Optimal Production Control of Hybrid Manufacturing/Remanufacturing Failure-Prone Systems under Diffusion-Type Demand ».
Applied Mathematics, vol. 4, nº 3.
pp. 550-559.
Sampaio, A., Bouix, S., Sousa, N., Vasconcelos, C., Férnandez, M., Shenton, M. E. et Gonçalves, O. F..
2013.
« Morphometry of corpus callosum in Williams syndrome: Shape as an index of neural development ».
Brain Structure and Function, vol. 218, nº 3.
pp. 711-720.
Sanou, D. A. et Landry, René Jr. .
2013.
« Analysis of GNSS interference impact on society and evaluation of spectrum protection strategies ».
Positioning, vol. 4, nº 2.
pp. 169-182.
Sboui, Lokman, Rezki, Zouheir et Alouini, Mohamed-Slim.
2013.
« A unified framework for the ergodic capacity of spectrum sharing cognitive radio systems ».
IEEE Transactions on Wireless Communications, vol. 12, nº 2.
pp. 877-887.
Seers, Patrice, Foucher, Fabrice et Mounaim-Rousselle, Christine.
2013.
« Influence of O2-enriched intake air with CO2 dilution on the combustion process of an optically accessible spark-ignition engine ».
International Journal of Engine Research, vol. 14, nº 1.
pp. 34-44.
Segonds, Stephane, Masounave, Jacques, Songmene, Victor et Bes, Christian.
2013.
« A simple analytical model for burr type prediction in drilling of ductile materials ».
Journal of Materials Processing Technology, vol. 213, nº 6.
pp. 971-977.
Sharma, Smarjeet et Constantin, Nicolas .
2013.
« Formulations for the estimation of IMD levels in an envelope feedback RFIC amplifier: An extension to dynamic AM and PM behavior ».
IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol. 32, nº 12.
pp. 2019-2023.
Sheremet'Ev, V. A., Dubinskii, S. M., Zhukova, Yu S., Brailovski, Vladimir, Petrzhik, M. I., Prokoshkin, S. D., Pustov, Yu A. et Filonov, M. R..
2013.
« Mechanical and electrochemical characteristics of thermomechanically treated superelastic Ti-Nb-(Ta, Zr) alloys ».
Metal Science and Heat Treatment, vol. 55, nº 1-2.
pp. 100-108.
Silva, Hideson Alves da, de Souza Britto Jr, Alceu, Oliveira, Luiz Eduardo Soares de et Koerich, Alessandro L..
2013.
« Network infrastructure design with a multilevel algorithm ».
Expert Systems with Applications, vol. 40, nº 9.
pp. 3471-3480.
Singh, Mukhtiar et Chandra, Ambrish.
2013.
« Real-time implementation of ANFIS control for renewable interfacing inverter in 3P4W distribution network ».
IEEE Transactions on Industrial Electronics, vol. 60, nº 1.
pp. 121-128.
Slamani, M. et Bonev, Ilian.
2013.
« Characterization and experimental evaluation of gear transmission errors in an industrial robot ».
Industrial Robot, vol. 40, nº 5.
pp. 441-449.
Souza, Flávia, de Paula, Nathália et Melhado, Silvio Burratino.
2013.
« Evolução gerencial de uma empresa projetista brasileira : Da implementação de modelos de gestão ao desenvolvimento do sistema de informações gerenciais ».
Gestão & Tecnologia de Projetos, vol. 8, nº 2.
pp. 47-66.
Stanescu, Magdalena, Kajl, Stanislaw et Lamarche, Louis.
2013.
« Simplified optimization method for preliminary design of HVAC system and real building application ».
HVAC&R Research, vol. 19, nº 3.
pp. 213-229.
Sumner, Jonathon, Espana, Guillaume, Masson, Christian et Aubrun, Sandrine.
2013.
« Evaluation of RANS/actuator disk modelling of wind turbine wake flow using wind tunnel measurements ».
International Journal of Engineering Systems Modelling and Simulation, vol. 5, nº 1-3.
pp. 147-158.
Sun, Huichao, Houssin, Remy, Gardoni, Mickaël et de Bauvrond, François.
2013.
« Integration of user behaviour and product behaviour during the design phase: Software for behavioural design approach ».
International Journal of Industrial Ergonomics, vol. 43, nº 1.
pp. 100-114.
Sun, Shuhui, Zhang, Gaixia, Gauquelin, Nicolas, Chen, Ning, Zhou, Jigang, Yang, Songlan, Chen, Weifeng, Meng, Xiangbo, Geng, Dongsheng, Banis, Mohammad N., Li, Ruying, Ye, Siyu, Knights, Shanna, Botton, Gianluigi A., Sham, Tsun-Kong et Sun, Xueliang.
2013.
« Single-atom catalysis using Pt/graphene achieved through atomic layer deposition ».
Scientific Reports, vol. 3.
Taghvaei, M. A., Cicek, Paul-Vahe, Allidina, Karim, Nabki, Frederic et El-Gamal, Mourad N..
2013.
« A 0.13- um CMOS interface circuit for a MEMS resonator-based vacuum measurement system ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 60, nº 12.
pp. 3136-3144.
Tahvilian, Amir Masoud, Liu, Zhaoheng, Champliaud, Henri et Hazel, Bruce.
2013.
« Experimental and finite element analysis of temperature and energy partition to the workpiece while grinding with a flexible robot ».
Journal of Materials Processing Technology, vol. 213, nº 12.
pp. 2292-2303.
Talbot, Edith, Hubert, Pascal, Dubé, Martine et Yousefpour, Ali.
2013.
« Optimization of thermoplastic composites resistance welding parameters based on transient heat transfer finite element modeling ».
Journal of Thermoplastic Composite Materials, vol. 26, nº 5.
pp. 699-717.
Thalla, Pradeep Kumar, Contreras-García, Angel, Fadlallah, Hicham, Barrette, Jérémie, De Crescenzo, Gregory, Merhi, Yahye et Lerouge, Sophie.
2013.
« A versatile star PEG grafting method for the generation of nonfouling and nonthrombogenic surfaces ».
BioMed Research International, vol. 2013.
Thamsuwan, Ornwipa, Blood, Ryan P., Ching, Randal P., Boyle, Linda et Johnson, Peter W..
2013.
« Whole body vibration exposures in bus drivers: A comparison between a high-floor coach and a low-floor city bus ».
International Journal of Industrial Ergonomics, vol. 43, nº 1.
pp. 9-17.
Thibeault, Claude, Hariri, Y., Hasan, S. R., Hobeika, C., Savaria, Y., Audet, Y. et Tazi, F. Z..
2013.
« A library-based early soft error sensitivity analysis technique for SRAM-based FPGA design ».
Journal of Electronic Testing: Theory and Applications, vol. 29, nº 4.
pp. 457-471.
Thuot, Dominique, Liu, Zhaoheng, Champliaud, Henri, Beaudry, Julien, Richard, Pierre-Luc et Blain, Michel.
2013.
« Remote robotic underwater grinding system and modeling for rectification of hydroelectric structures ».
Robotics and Computer-Integrated Manufacturing, vol. 29, nº 1.
pp. 86-95.
Toews, Matthew et Wells III, William M..
2013.
« Efficient and robust model-to-image alignment using 3D scale-invariant features ».
Medical Image Analysis, vol. 17, nº 3.
pp. 271-282.
Tong, Jason G., Boulé, Marc et Zilic, Zeljko.
2013.
« Test compaction techniques for assertion-based test generation ».
ACM Transactions on Design Automation of Electronic Systems, vol. 19, nº 1.
Torra, V., Auguet, C., Isalgue, A., Carreras, G., Terriault, Patrick et Lovey, F. C..
2013.
« Built in dampers for stayed cables in bridges via SMA. The SMARTeR-ESF project: A mesoscopic and macroscopic experimental analysis with numerical simulations ».
Engineering Structures, vol. 49.
pp. 43-57.
Torra, V., Isalgue, A., Auguet, C., Carreras, G., Lovey, F. C. et Terriault, Patrick.
2013.
« Damping in civil engineering using SMA part 2 - Particular properties of NiTi for damping of stayed cables in bridges ».
Canadian Metallurgical Quarterly, vol. 52, nº 1.
pp. 81-89.
Touani, Ismael, Yu, Wei, Gagnon, Yves et Masson, Christian.
2013.
« Development of a wind to power model for wind farm power production forecasting ».
Wind Engineering, vol. 37, nº 4.
pp. 347-368.
Tran, Quan H., Champliaud, Henri, Feng, Zhengkun, Salem, Jamel et Dao, Thien-My.
2013.
« Heat-assisted roll-bending process dynamic simulation ».
International Journal of Modelling and Simulation, vol. 33, nº 1.
pp. 54-62.
Tremblay, Christine, Archambault, E., Belanger, M., Savoie, J. P., Gagnon, François et Plant, D..
2013.
« Passive filterless core networks based on advanced modulation and electrical compensation technologies ».
Telecommunication Systems, vol. 54, nº 2.
pp. 167-181.
Trudeau, L. C. et Gagnon, François.
2013.
« Suppression of multiple power line harmonic interference for low frequency signals ».
Electronics Letters, vol. 49, nº 2.
pp. 114-116.
Trudel, B., Nadeau, Sylvie, Zaras, K. et Deschamps, I..
2013.
« L'innovation dans le domaine minier: impacts et gestion ».
[Résumé d'une communication à une conférence]. Travail et Santé, vol. 29, nº 2.
p. 22.
Tu, Xiaoping, Dessaint, Louis A. et Kamwa, Innocent.
2013.
« A global approach to transient stability constrained optimal power flow using a machine detailed model ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 36, nº 1.
pp. 32-41.
Tu, Xiaoping, Dessaint, Louis- A. et Nguyen-Duc, Huy.
mars 2013.
« Transient stability constrained optimal power flow using independent dynamic simulation ».
IET Generation, Transmission and Distribution, vol. 7, nº 3.
pp. 244-253.
Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick.
2013.
« Impact-induced damage and damage propagation under flexural load in TiNi and Kevlar-stitched carbon/epoxy laminates ».
Composite Structures, vol. 100.
pp. 424-435.
Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick.
2013.
« Prediction of the propagation of impact-induced delamination in carbon/epoxy laminates ».
Composite Structures, vol. 95.
pp. 227-235.
Vahedi, Hani, Kiapi, Alireza Alizadeh, Tavakoli Bina, Mohammad et Al Haddad, Kamal.
2013.
« Weighting method to identify interharmonics based on calculating the bandwidth in group-harmonics ».
Journal of Power Electronics, vol. 13, nº 1.
pp. 170-176.
Valdés, Francisco et Abran, Alain .
2013.
« Using the ISO 19761 COSMIC measurement standard to reduce “information asymmetry” in software development contracts and enable greater competitiveness ».
Technology and Investment, vol. 4, nº 4.
pp. 261-268.
Valentin, Olivier et Laville, Frédéric.
2013.
« Est-il possible de mesurer l'atténuation des protecteurs auditifs grâce aux potentiels évoqués auditifs? ».
[Résumé d'une communication à une conférence]. Travail et Santé, vol. 29, nº 1.
p. 23.
Van, Lan Anh et Pham Van Bang, Damien.
2013.
« Hindered settling of sand-mud flocs mixtures: From model formulation to numerical validation ».
Advances in Water Resources, vol. 53.
pp. 1-11.
Vanga-Bouanga, C., Frechette, M. et David, Éric.
2013.
« A custom-made semi-conducting powder for high voltage field grading applications ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, nº 4.
pp. 1453-1456.
Vazquez, Maria de L., Waaub, Jean-Philippe et Ilinca, Adrian.
2013.
« Territorial intelligence modelling for energy development (TIMED) - A case study for the Baie-des-Sables (Canada) wind farm ».
International Journal of Multicriteria Decision Making, vol. 3, nº 2-3.
pp. 236-255.
Vega-Azamar, Ricardo Enrique, Glaus, Mathias, Hausler, Robert, Oropeza-Garcia, Norma Angelica et Romero-Lopez, Rabindranarth.
2013.
« An emergy analysis for urban environmental sustainability assessment, the Island of Montreal, Canada ».
Landscape and Urban Planning, vol. 118.
pp. 18-28.
Vellasques, E., Sabourin, Robert et Granger, Éric.
2013.
« Fast intelligent watermarking of heterogeneous image streams through mixture modeling of PSO populations ».
Applied Soft Computing, vol. 13, nº 6.
pp. 3130-3148.
Vellasques, Eduardo, Sabourin, Robert et Granger, Éric.
2013.
« DS-DPSO: A dual surrogate approach for intelligent watermarking of bi-tonal document image streams ».
Expert Systems with Applications, vol. 40, nº 13.
pp. 5240-5259.
Verdière, Kévin, Panneton, Raymond, Elkoun, Saïd, Dupont, Thomas et Leclaire, Philippe.
2013.
« Transfer matrix method applied to the parallel assembly of sound absorbing materials ».
Journal of the Acoustical Society of America, vol. 134, nº 6.
pp. 4648-4658.
Viallet, Guilhem, Sgard, Franck, Laville, Frédéric et Boutin, Jerome.
2013.
« Axisymmetric versus three-dimensional finite element models for predicting the attenuation of earplugs in rigid walled ear canals ».
Journal of the Acoustical Society of America, vol. 134, nº 6.
pp. 4470-4480.
Vinches, Ludwig, de Santa Barbara, Jessy, Hallé, Stéphane, Dolez, Patricia et Wilkinson, Kevin J..
2013.
« Physical Phenomena Facilitating the Penetration of Solutions of TiO2 Nanoparticles through Protective Gloves ».
International Journal of Theoretical and Applied Nanotechnology, vol. 1, nº 2.
pp. 1-16.
Vinches, Ludwing, Testori, Nicolas, Dolez, Patricia, Perron, Gérald, Wilkinson, Kevin J. et Hallé, Stéphane.
2013.
« Experimental evaluation of the penetration of TiO2 nanoparticles through protective clothing and gloves under conditions simulating occupational use ».
Nanoscience Methods, vol. 2, nº 1.
pp. 1-15.
Vlad-Cristea, Mirela Simona, Landry, Véronic, Blanchet, Pierre et Ouellet-Plamondon, Claudiane.
2013.
« Nanocrystalline cellulose as effect pigment in clear coatings for wood ».
ISRN Nanomaterials, vol. 2013.
Vu, V. H., Thomas, M., Lafleur, F. et Marcouiller, L..
2013.
« Towards an automatic spectral and modal identification from operational modal analysis ».
Journal of Sound and Vibration, vol. 332, nº 1.
pp. 213-227.
Wang, Ruxi, Fortin Blanchette, Handy, Mu, Mingkai, Boroyevich, Dushan et Mattavelli, Paolo.
2013.
« Influence of High-Frequency Near-Field Coupling Between Magnetic Components on EMI Filter Design ».
IEEE Transactions on Power Electronics, vol. 28, nº 10.
pp. 4568-4579.
Wehbi, Ahmad, Zaguia, Atef, Ramdane-Chérif, Amar et Tadj, Chakib.
2013.
« Multimodal fusion for interaction systems ».
Journal of Emerging Trends in Computing and Information Sciences, vol. 4, nº 5.
pp. 445-458.
Weiss, Julien, Berson, A. et Comte-Bellot, G..
2013.
« Investigation of nonlinear effects in constant-temperature anemometers ».
Measurement Science and Technology, vol. 24, nº 8.
Weissenbacher, Norbert, Nikiema, Josiane, Garfi, Marianna et Figoli, Alberto.
2013.
« What do we require from water biotechnologies in Africa? ».
[Article de conférence]. Sustainable Sanitation Practice, vol. 14, nº 1.
pp. 35-40.
Yeste Ojeda, Omar A., Grajal, Jesus et Lopez Risueño, Gustavo.
2013.
« Analytical performance of GNSS receivers using interference mitigation techniques ».
IEEE Transactions on Aerospace and Electronic Systems, vol. 49, nº 2.
pp. 885-906.
Yi, J., Gharghouri, M., Bocher, Philippe et Medraj, M..
2013.
« Distortion and residual stress measurements of induction hardened AISI 4340 discs ».
Materials Chemistry and Physics, vol. 142, nº 1.
pp. 248-258.
Zaghbani, Imed, Songmene, Victor et Bonev, Ilian.
2013.
« An experimental study on the vibration response of a robotic machining system ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, nº 6.
pp. 866-880.
Zaguia, Atef, Wehbi, Ahmad, Miraoui, Moeiz, Tadj, Chakib et Ramdane-Chérif, Amar.
2013.
« Modeling rules fission and modality selection using ontology ».
Journal of Software Engineering and Applications, vol. 6, nº 7.
pp. 354-371.
Zaguia, Atef, Wehbi, Ahmad, Tadj, Chakib et Ramdane-Chérif, Amar.
2013.
« Multimodal fission for interaction architecture ».
Journal of Emerging Trends in Computing and Information Sciences, vol. 4, nº 1.
pp. 152-166.
Zarour, Mohamad, Alarifi, Abdulrahman, Abran, Alain et Desharnais, Jean-Marc.
2013.
« Evaluating software process assessment methods based on engineering design principles ».
The International Journal of Soft Computing and Software Engineering, vol. 3, nº 3.
pp. 536-543.
Zavaschi, Thiago H. H., Britto Jr, Alceu S., Oliveira, Luiz E. S. et Koerich L., Alessandro.
2013.
« Fusion of feature sets and classifiers for facial expression recognition ».
Expert Systems with Applications, vol. 40, nº 2.
pp. 646-655.
Zazoum, B., David, Éric et Ngô, Anh Dung.
2013.
« LDPE/HDPE/clay nanocomposites: Effects of compatibilizer on the structure and dielectric response ».
Journal of Nanotechnology, vol. 2013.
Zedan, Yasser, Songmene, Victor, Kouam, Jules et Masounave, Jacques.
2013.
« Effects of lubrication modes on part quality during drilling 6061-T6 aluminium alloy ».
International Journal of Machining and Machinability of Materials, vol. 13, nº 2-3.
pp. 231-252.
Zerouali, Y., Herry, C. L., Jemel, B. et Lina, Jean-Marc.
2013.
« Localization of Synchronous Cortical Neural Sources ».
IEEE Transactions on Biomedical Engineering, vol. 60, nº 3.
pp. 770-780.
Zerouali, Younes, Lina, Jean-Marc et Jemel, Boutheina.
2013.
« Optimal eye-gaze fixation position for face-related neural responses ».
PLoS ONE, vol. 8, nº 6.
Zhang, Gaixia, Sun, Shuhui, Cai, Mei, Zhang, Yong, Li, Ruying et Sun, Xueliang.
2013.
« Porous dendritic platinum nanotubes with extremely high activity and stability for oxygen reduction reaction ».
Scientific Reports, vol. 3.
Zhang, Qi, Zhu, Quanyan, Zhani, Mohamed Faten, Boutaba, Raouf et Hellerstein, Joseph L..
2013.
« Dynamic service placement in geographically distributed clouds ».
IEEE Journal on Selected Areas in Communications, vol. 31, nº 12.
pp. 762-772.
Zhang, Qing, Cicek, Paul-Vahe, Nabki, Frederic et El-Gamal, Mourad.
2013.
« Thin-film encapsulation technology for above-IC MEMS wafer-level packaging ».
Journal of Micromechanics and Microengineering, vol. 23, nº 12.
pp. 125012-125019. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau