| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Document quand le type de document est "Article publié dans une revue, révisé par les pairs" et l'année est 2015Nombre de documents archivés : 513.
Abenhaim, Gad N., Desrochers, Alain, Tahan, Antoine S. et Bigeon, Jean.
2015.
« A finite-element boundary condition setting method for the virtual mounting of compliant components ».
Journal of Computing and Information Science in Engineering, vol. 15, nº 4.
Abenhaim, Gad N., Desrochers, Alain, Tahan, S.-Antoine et Bigeon, Jean.
2015.
« A virtual fixture using a FE-based transformation model embedded into a constrained optimization for the dimensional inspection of nonrigid parts ».
Computer-Aided Design, vol. 62.
pp. 248-258.
Abo El Ezz, Ahmad, Nollet, Marie-José et Nastev, Miroslav.
2015.
« Assessment of earthquake-induced damage in Quebec city, Canada ».
International Journal of Disaster Risk Reduction, vol. 12.
pp. 16-24.
Abo El Ezz, Ahmad, Seif Eldin, Hany M. et Galal, Khaled.
2015.
« Influence of confinement reinforcement on the compression stress-strain of grouted reinforced concrete block masonry boundary elements ».
Structures, vol. 2.
pp. 32-43.
Abou Ziki, Jana D., Hof, Lucas A. et Wuthrich, Rolf.
2015.
« The machining temperature during Spark Assisted Chemical Engraving of glass ».
Manufacturing Letters, vol. 3.
pp. 9-13.
Abou, Seraphin C. et Saad, Maarouf.
2015.
« System-based safety tenets applied to the extra-high voltage transmission line design for common uses of highway right-of-way ».
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, vol. 1, nº 3.
Abou-Abbas, Lina, Fersaie Alaie, Hesam et Tadj, Chakib.
2015.
« Automatic detection of the expiratory and inspiratory phases in newborn cry signals ».
Biomedical Signal Processing and Control, vol. 19.
pp. 35-43.
Abran, Alain, Desharnais, Jean-Marc, Zarour, Mohammad et Demirors, Onur.
2015.
« Productivity-based software estimation models and process improvement: an empirical study ».
International Journal on Advances in Software, vol. 8, nº 1&2.
pp. 103-114.
Abrassart, Christophe, Gauthier, Philippe, Proulx, Sébastien et Martel, Marie.
2015.
« Le design social : Une sociologie des associations par le design ? Le cas de deux démarches de codesign dans des projets de rénovation des bibliothèques de la Ville de Montréal ».
Lien social et Politiques, nº 73.
pp. 117-138.
Acharya, Ashwin, Packirisamy, Muthukumaran et Izquierdo, Ricardo.
2015.
« OLED hybrid integrated polymer microfluidic biosensing for point of care testing ».
Micromachines, vol. 6, nº 9.
pp. 1406-1420.
Afifi, Mohammad Z., Mohamed, Hamdy M., Chaallal, Omar et Benmokrane, Brahim.
2015.
« Confinement model for concrete columns internally confined with carbon FRP spirals and hoops ».
Journal of Structural Engineering, vol. 141, nº 9.
Ahmadabadi, Z. Nili, Laville, Frédéric et Guilbault, Raynald.
2015.
« An empirical prediction law for quasi-static nail-plywood penetration resistance ».
Construction and Building Materials, vol. 88.
pp. 126-133.
Aidara, Lamine Mouhamed Chérif, Ba, Makhaly et Carter, Alan.
2015.
« Choice of an advanced rheological model for modeling the viscoelastic behavior of Hot Mixtures Asphalt (HMA) from Sénégal (West Africa) ».
Open Journal of Civil Engineering, vol. 5, nº 3.
pp. 289-298.
Aidibe, Ali et Tahan, S.-Antoine.
2015.
« Adapting the coherent point drift algorithm to the fixtureless dimensional inspection of compliant parts ».
International Journal of Advanced Manufacturing Technology, vol. 79, nº 5.
pp. 831-841.
Alam, Md Jahangir, Gupta, Vishwa, Kenny, Patrick et Dumouchel, Pierre.
2015.
« Speech recognition in reverberant and noisy environments employing multiple feature extractors and i-vector speaker adaptation ».
EURASIP Journal on Advances in Signal Processing, vol. 2015, nº 1.
Alghorani, Yahia, Kaddoum, Georges, Muhaidat, Sami et Pierre, Samuel.
2015.
« On the approximate analysis of energy detection over n* Rayleigh fading channels through cooperative spectrum sensing ».
IEEE Wireless Communications Letters, vol. 4, nº 4.
pp. 413-416.
Alves Oliveira, Luciana, Burattino Melhado, Silvio et Vittorino, Fulvio.
2015.
« Selection of building technology based on sustainability requirements - Brazilian context ».
Architectural Engineering and Design Management, vol. 11, nº 5.
pp. 390-404.
Amador-Fontalvo, Jaime E., Paternina-Arboleda, Carlos D. et Montoya-Torres, Jairo R..
2015.
« Solving the heterogeneous vehicle routing problem with time windows and multiple products via a bacterial meta-heuristic ».
International Journal of Advanced Operations Management, vol. 6, nº 1.
pp. 81-100.
Amamra, Abdelfattah, Robert, Jean-Marc et Talhi, Chamseddine.
2015.
« Enhancing malware detection for Android systems using a system call filtering and abstraction process ».
Security and Communication Networks, vol. 8, nº 7.
pp. 1179-1192.
Amar, Achraf Bem, Bahloul, Dorra, Gagnon, François et Kouki, Ammar B..
2015.
« MEMS filter's design and modeling based on width-extensional mode plate resonator for wireless applications ».
Microsystem Technologies, vol. 21, nº 7.
pp. 1567-1576.
Ameyed, Darine, Miraoui, Moeiz et Tadj, Chakib.
2015.
« A spatiotemporal context definition for service adaptation prediction in a pervasive computing environment ».
International Journal of Advanced Studies in Computer Science and Engineering, vol. 4, nº 4.
pp. 6-14.
Ameyed, Darine, Miraoui, Moeiz et Tadj, Chakib.
2015.
« A survey of prediction approach in pervasive computing ».
International Journal of Scientific and Engineering Research, vol. 6, nº 5.
pp. 306-316.
Amini, F., Rufiange, S., Hossain, Z., Ventura, Q., Irani, P. et McGuffin, Michael John.
2015.
« The impact of interactivity on comprehending 2D and 3D visualizations of movement data ».
IEEE Transactions on Visualization and Computer Graphics, vol. 21, nº 1.
pp. 122-135.
Amokrane, Ahmed, Langar, Rami, Boutaba, Raouf et Pujolle, Guy.
2015.
« Flow-based management for energy efficient campus networks ».
IEEE Transactions on Network and Service Management, vol. 12, nº 4.
pp. 565-579.
Amokrane, Ahmed, Langar, Rami, Zhani, Mohamed Faten, Boutaba, Raouf et Pujolle, Guy.
2015.
« Greenslater: On satisfying green SLAs in distributed clouds ».
IEEE Transactions on Network and Service Management, vol. 12, nº 3.
pp. 363-376.
Anton, N. et Botez, R. M..
2015.
« Weight functions method for stability analysis applied as design tool for Hawker 800XP aircraft ».
Aeronautical Journal, vol. 119, nº 1218.
pp. 981-998.
Antunez, Guillaume, Abo-El-Ezz, Ahmad, Nollet, Marie-José et Khaled, Amar.
2015.
« Analyse de la vulnérabilité sismique hors-plan des bâtiments de maçonnerie de pierre de l'Est canadien : Application aux bâtis du Vieux-Québec et du Vieux-Montréal ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 42, nº 12.
pp. 1125-1134.
Archetti, Claudia, Bianchessi, Nicola, Hertz, Alain, Colombet, Adrien et Gagnon, François.
2015.
« Directed weighted improper coloring for cellular channel allocation ».
Discrete Applied Mathematics, vol. 182.
pp. 46-60.
Aridhi, Emna, Abbes, Mehdi, Saad, Maarouf, Mhiri, Radhi et Mami, Abdelkader.
2015.
« Pseudo bond graph model of thermal transfers sustained by ice quantity of a domestic refrigerator for energy saving application ».
IEEJ Transactions on Electrical and Electronic Engineering, vol. 10, nº 3.
pp. 308-319.
Arpin-Pont, Jérémy, Gagnon, Martin, Tahan, S.-Antoine, Coutu, André et Thibault, Denis.
2015.
« Methodology for estimating strain gauge measurement biases and uncertainties on isotropic materials ».
Journal of Strain Analysis for Engineering Design, vol. 50, nº 1.
pp. 40-50.
Arsenault, Richard, Gatien, Philippe, Renaud, Benoit, Brissette, François et Martel, Jean-Luc.
2015.
« A comparative analysis of 9 multi-model averaging approaches in hydrological continuous streamflow simulation ».
Journal of Hydrology, vol. 529, nº P3.
pp. 754-767.
Arsenault, Richard, Poissant, Dominique et Brissette, François.
2015.
« Parameter dimensionality reduction of a conceptual model for streamflow prediction in Canadian, snowmelt dominated ungauged basins ».
Advances in Water Resources, vol. 85.
pp. 27-44.
Arya, Sabha Raj, Niwas, Ram, Bhalla, Krishan Kant, Singh, Bhim, Chandra, Ambrish et Al-Haddad, Kamal.
2015.
« Power quality improvement in isolated distributed power generating system using DSTATCOM ».
IEEE Transactions on Industry Applications, vol. 51, nº 6.
pp. 4766-4774.
Asgarinia, Soroush, Viriyasuthee, Chanvit, Phillips, Steven, Dubé, Martine, Baets, Joris, Van Vuure, Aart, Verpoest, Ignaas et Lessard, Larry.
2015.
« Tension-tension fatigue behaviour of woven flax/epoxy composites ».
Journal of Reinforced Plastics and Composites, vol. 34, nº 11.
pp. 857-867.
Assaad, Elias, Maire, Marion et Lerouge, Sophie.
2015.
« Injectable thermosensitive chitosan hydrogels with controlled gelation kinetics and enhanced mechanical resistance ».
Carbohydrate Polymers, vol. 130.
pp. 87-96.
Assi, Rola et McClure, Ghyslaine.
2015.
« Evolution of the nbcc seismic provisions for operational and functional components in buildings ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 42, nº 12.
pp. 993-999.
Assid, M., Gharbi, A. et Dhouib, K..
2015.
« Joint production and subcontracting planning of unreliable multi-facility multi-product production systems ».
Omega, vol. 50.
pp. 54-69.
Assid, M., Gharbi, A. et Hajji, A..
2015.
« Production planning and opportunistic preventive maintenance for unreliable one-machine two-products manufacturing systems ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 478-483.
Assid, M., Gharbi, Ali et Hajji, A..
2015.
« Joint production, setup and preventive maintenance policies of unreliable two-product manufacturing systems ».
International Journal of Production Research, vol. 53, nº 15.
pp. 4668-4683.
Assunção, Marcos D., Calheiros, Rodrigo N., Bianchi, Silvia, Netto, Marco A. S. et Buyya, Rajkumar.
2015.
« Big Data computing and clouds: Trends and future directions ».
Journal of Parallel and Distributed Computing, vol. 79-80.
pp. 3-15.
Au, M., Agba, B. L. et Gagnon, F..
2015.
« Fast identification of partial discharge sources using blind source separation and kurtosis ».
Electronics Letters, vol. 51, nº 25.
pp. 2132-2134.
Au, Minh, Agba, B. L. et Gagnon, François.
2015.
« A model of electromagnetic interferences induced by corona discharges for wireless channels in substation environments ».
IEEE Transactions on Electromagnetic Compatibility, vol. 57, nº 3.
pp. 522-531.
Aubry-Wake, Caroline, Baraer, Michel, McKenzie, Jeffrey M., Mark, Bryan G., Wigmore, Oliver, Hellstrom, Robert A., Lautz, Laura et Somers, Lauren.
2015.
« Measuring glacier surface temperatures with ground-based thermal infrared imaging ».
Geophysical Research Letters, vol. 42, nº 20.
pp. 8489-8497.
Bao, Lin, Bois, Guy, Boland, Jean-François et Savard, Julien.
2015.
« Model-based method to automate the design of IMA avionics system based on cosimulation ».
SAE International Journal of Aerospace, vol. 8, nº 2.
Baraër, Michel, McKenzie, Jeffrey, Mark, Bryan G., Gordon, Ryan, Bury, Jeffrey, Condom, Thomas, Gomez, Jesus, Knox, Sara et Fortner, Sarah K..
2015.
« Contribution of groundwater to the outflow from ungauged glacierized catchments: a multi-site study in the tropical Cordillera Blanca, Peru ».
Hydrological Processes, vol. 29, nº 11.
pp. 2561-2581.
Barros, Willyam R. P., Wei, Qiliang, Zhang, Gaixia, Sun, Shuhui, Lanza, Marcis R. V. et Tavares, Ana C..
2015.
« Oxygen reduction to hydrogen peroxide on Fe3O4 nanoparticles supported on Printex carbon and Graphene ».
Electrochimica Acta, vol. 162.
pp. 263-270.
Basaligheh, Ali, Saffari, Parvaneh, Taherzadeh-Sani, M. et Nabki, Frederic.
2015.
« A highly efficient and linear broadband common-drain CMOS power amplifier with transformer-based input-matching network ».
IEEE Microwave and Wireless Components Letters, vol. 25, nº 12.
pp. 814-816.
Basbous, Tammam, Younes, Rafic, Ilinca, Adrian et Perron, Jean.
2015.
« Optimal management of compressed air energy storage in a hybrid wind-pneumatic-diesel system for remote area's power generation ».
Energy, vol. 84.
pp. 267-278.
Bège, Thierry, Ménard, Jérémie, Tremblay, Jaelle, Denis, Ronald, Arnoux, Pierre-Jean et Petit, Yvan.
2015.
« Biomechanical analysis of traumatic mesenteric avulsion ».
Medical and Biological Engineering and Computing, vol. 53, nº 2.
pp. 187-194.
Bejaoui, Salma, Lemaire, Romain et Therssen, Eric.
2015.
« Analysis of laser-induced fluorescence spectra obtained in spray flames of diesel and rapeseed methyl ester using the multiple-excitation wavelength laser-induced incandescence technique with IR, UV, and visible excitations ».
Combustion Science and Technology, vol. 187, nº 6.
pp. 906-924.
Ben Amar, Achraf, Kouki, Ammar B. et Cao, Hung.
2015.
« Power approaches for implantable medical devices ».
Sensors, vol. 15, nº 11.
pp. 28889-28914.
Ben Ayed, Ismail, Punithakumar, Kumaradevan et Li, Shuo.
2015.
« Distribution matching with the Bhattacharyya similarity: a bound optimization framework ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 37, nº 9.
pp. 1777-1791.
Benadja, Mounir et Chandra, Ambrish.
2015.
« Adaptive sensorless control of PMSGs-based offshore wind farm and VSC-HVdc stations ».
IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, nº 4.
pp. 918-931.
Benaouadj, M., Aboubou, A., Ayed, M. Y., Becherif, M. et Akhrif, O..
2015.
« Performance evaluation of an autonomous photovoltaic system for recharging electrical vehicle batteries ».
Balkan Journal of Electrical & Computer Engineering, vol. 3, nº 1.
pp. 36-41.
Benoit, Jocelyn et Paquette, Eric.
2015.
« Localized search for high definition video completion ».
Journal of WSCG, vol. 23, nº 1.
pp. 45-54.
Ben-Salem, A., Gharbi, Ali et Hajji, A..
2015.
« An Environmental Hedging Point Policy to control production rate and emissions in unreliable manufacturing systems ».
International Journal of Production Research, vol. 53, nº 2.
pp. 435-450.
Ben-Salem, Ali, Gharbi, Ali et Hajji, Adnène.
2015.
« Environmental issue in an alternative production-maintenance control for unreliable manufacturing system subject to degradation ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 1-4.
pp. 383-398.
Bensoussan, David.
2015.
« Robust and ultrafast response compensator for unstable invertible plants ».
Automatica, vol. 60.
pp. 43-47.
Bergeron, Nantel, Ceballos, Cesar et Labbé, Jean-Philippe.
2015.
« Fan realizations of type A subword complexes and multi-associahedra of rank 3 ».
Discrete and Computational Geometry, vol. 54, nº 1.
pp. 195-231.
Bergeron-Brlek, Milan, Goodwin-Tindall, Jake, Cekic, Nevena, Roth, Christian, Zandberg, Wesley F., Shan, Xiaoyang, Varghese, Vimal, Chan, Sherry, Davies, Gideon J., Vocadlo, David J. et Britton, Robert.
2015.
« A convenient approach to stereoisomeric iminocyclitols: Generation of potent brain-permeable OGA inhibitors ».
Angewandte Chemie - International Edition, vol. 54, nº 51.
pp. 15429-15433.
Bergeron-Brlek, Milan, Meanwell, Michael et Britton, Robert.
2015.
« Direct synthesis of imino-C-nucleoside analogues and other biologically active iminosugars ».
Nature Communications, vol. 6.
Bi, Eustache Goore, Monette, Frédéric, Gachon, Philippe, Gasperi, Johnny et Perrodin, Yves.
2015.
« Quantitative and qualitative assessment of the impact of climate change on a combined sewer overflow and its receiving water body ».
Environmental Science and Pollution Research, vol. 22, nº 15.
pp. 11905-11921.
Bing, Xiaoyun, Bloemhof-Ruwaard, Jacqueline, Chaabane, Amin et van der Vorst, Jack.
2015.
« Global reverse supply chain redesign for household plastic waste under the emission trading scheme ».
Journal of Cleaner Production, vol. 103.
pp. 28-39.
Blouin, Arnaud, Moha, Naouel, Baudry, Benoit, Sahraoui, Houari et Jézéquel, Jean-Marc.
2015.
« Assessing the use of slicing-based visualizing techniques on the understanding of large metamodels ».
Information and Software Technology, vol. 62, nº 1.
pp. 124-142.
Blouin, Martine, Lalumire, Mathieu, Gagnon, Dany H., Chénier, Félix et Aissaoui, Rachid.
2015.
« Characterization of the immediate effect of a training session on a manual wheelchair simulator with haptic biofeedback: towards more effective propulsion ».
IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 23, nº 1.
pp. 104-115.
Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie.
2015.
« The opportunities and challenges of in-ear noise dosimetry ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 3.
pp. 80-81.
Botez, R. M., Tchatchueng Kammegne, M. J. et Grigorie, L. T..
2015.
« Design, numerical simulation and experimental testing of a controlled electrical actuation system in a real aircraft morphing wing model ».
Aeronautical Journal, vol. 119, nº 1219.
pp. 1047-1072.
Bouchaffra, D., Cheriet, Mohamed, Jodoin, P. M. et Beck, D..
2015.
« Machine learning and pattern recognition models in change detection ».
Pattern Recognition, vol. 48, nº 3.
pp. 613-615.
Boudra, Meryem, Hina, Manolo Dulva, Ramdane-Cherif, Amar et Tadj, Chakib.
2015.
« Architecture and ontological modelling for assisted driving and interaction ».
International Journal of Advanced Computer Research, vol. 5, nº 20.
pp. 270-283.
Boudreau-Trudel, Bryan, Nadeau, Sylvie et Zaras, Kazimierz.
2015.
« Innovative mining equipment: key factors for successful implementation ».
American Journal of Industrial and Business Management, vol. 5, nº 4.
pp. 161-171.
Boukherroub, Tasseda, Ruiz, Angel, Guinet, Alain et Fondrevelle, Julien.
2015.
« An integrated approach for sustainable supply chain planning ».
Computers and Operations Research, vol. 54.
pp. 180-194.
Boulle, Adrien, Dubé, Martine et Gosselin, Frédérick P..
2015.
« Parametric study of an elliptical fuselage made of a sandwich composite structure ».
Mechanics Research Communications, vol. 69.
pp. 129-135.
Bourbonnais, Francis, Bigras, Pascal et Bonev, Ilian.
2015.
« Minimum-time trajectory planning and control of a pick-and-place five-bar parallel robot ».
IEEE/ASME Transactions on Mechatronics, vol. 20, nº 2.
pp. 740-749.
Bouriga, M., Taher, R., Morency, François et Weiss, Julien.
2015.
« Numerical investigation of secondary flows in a constant-width wind-tunnel contraction ».
Aeronautical Journal, vol. 119, nº 1215.
pp. 613-630.
Bouzid, A. H., Mourad, A. H. I. et El Domiaty, A..
2015.
« Impact of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ».
[Article de conférence]. Procedia Engineering, vol. 130.
pp. 176-192.
Bouzid, Hakim et Benabdallah, S..
2015.
« Characterization of PTFE-based gaskets at high temperature ».
Journal of Pressure Vessel Technology, vol. 137, nº 3.
Boyer, S., Doutres, Olivier, Sgard, F., Laville, Frédéric et Boutin, J..
2015.
« Low frequency finite element models of the acoustical behavior of earmuffs ».
Journal of the Acoustical Society of America, vol. 137, nº 5.
pp. 2602-2613.
Brailovski, V., Terriault, P., Prokoshkin, S., Simoneau, C., Rivard, J. et Dubinskiy, S..
2015.
« Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ».
[Article de conférence]. Materials Today: Proceedings, vol. 2, nº Supp. 3.
S511-S516.
Brailovski, Vladimir, Prokoshkin, Sergey, Inaekyan, Karine, Petrzhik, Mikhail, Filonov, Mikhail, Pustov, Yuriy, Dubinskiy, Sergey, Zhukova, Yulia, Korotitskiy, Andrey et Sheremetyev, Vadim.
2015.
« Thermomechanical treatment of Ti-Nb solid solution based SMA ».
Foundations of Materials Science and Engineering, vol. 81-82.
pp. 342-405.
Brais, Godefroy, Ménard, Jérémie, Mutch, Jennifer, Laflamme, G. Yves, Petit, Yvan et Rouleau, Dominique M..
2015.
« Transosseous braided-tape and double-row fixations are better than tension band for avulsion-type greater tuberosity fractures ».
Injury, vol. 46, nº 6.
pp. 1007-1012.
Brangier, Eric, Desmarais, Michel C., Némery, Alexandra et Prom Tep, Sandrine.
2015.
« Évolution de l’inspection heuristique : Intégration de l’accessibilité, de la praticité, de l’émotion et de la persuasion ».
Journal d'Interaction Personne-Système, vol. 4, nº 1.
Brangier, Eric, Némery, Alexandra et Schmitt, Séverine.
2015.
« Validation expérimentale des critères de persuasion interactive : Analyse de leur efficacité à inspecter la persuasion dans des interfaces ».
Journal d’Interaction Personne-Système, vol. 4, nº 1.
Brummund, Martin K., Sgard, Franck, Petit, Yvan, Laville, Frédéric et Nelisse, Hugues.
2015.
« An axisymmetric finite element model to study the earplug contribution to the bone conduction occlusion effect ».
Acta Acustica united with Acustica, vol. 101, nº 4.
pp. 775-788.
Brun-Berthet, Joris et Laville, Frederic.
2015.
« Using experimental design to characterize the effect of structural elements on acoustical response of hand-free phone ».
Applied Acoustics, vol. 100.
pp. 43-54.
Brunet, Charles, Ung, Bora, Wang, Lixian, Messaddeq, Younès, LaRochelle, Sophie et Rusch, Leslie A..
2015.
« Design of a family of ring-core fibers for OAM transmission studies ».
Optics Express, vol. 23, nº 8.
pp. 10553-10563.
Camargo Pérez, Johanna, Carrillo, Martha Helena et Montoya-Torres, Jairo R..
2015.
« Multi-criteria approaches for urban passenger transport systems: A literature review ».
Annals of Operations Research, vol. 226, nº 1.
pp. 69-87.
Cao, Hung, Thakar, Shreyas K., Oseng, Matthew Lee, Nguyen, Cuong M., Jebali, Chokri, Kouki, Ammar B. et Chiao, J. C..
2015.
« Development and characterization of a novel interdigitated capacitive strain sensor for structural health monitoring ».
IEEE Sensors Journal, vol. 15, nº 11.
pp. 6542-6548.
Caouette, C., Bureau, M. N., Vendittoli, P. A., Lavigne, M. et Nuño, Natalia.
2015.
« Influence of the stem fixation scenario on load transfer in a hip resurfacing arthroplasty with a biomimetic stem ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 45.
pp. 90-100.
Caron, François et Coulombe, Stéphane.
2015.
« Video error correction using soft-output and hard-output maximum likelihood decoding applied to H.264 baseline profile ».
IEEE Transactions on Circuits and Systems for Video Technology, vol. 25, nº 7.
pp. 1161-1174.
Carret, Jean-Claude, Falchetto, Augusto Cannone, Marasteanu, Mihai O., Di Benedetto, Hervé, Wistuba, Michael P. et Sauzeat, Cedric.
2015.
« Comparison of rheological parameters of asphalt binders obtained from bending beam rheometer and dynamic shear rheometer at low temperatures ».
Road Materials and Pavement Design, vol. 16, nº suppl. 1.
pp. 211-227.
Chaallal, Omar, Arockiasamy, Madasamy et Godat, Ahmed.
2015.
« Field test performance of buried flexible pipes under live truck loads ».
Journal of Performance of Constructed Facilities, vol. 29, nº 5.
Chaallal, Omar, Arockiasamy, Madasamy et Godat, Ahmed.
2015.
« Numerical finite-element investigation of the parameters influencing the behavior of flexible pipes for culverts and storm sewers under truck load ».
Journal of Pipeline Systems Engineering and Practice, vol. 6, nº 2.
Chaallal, Ommar, Arockiasamy, Madasamy et Godat, Ahmed.
2015.
« Laboratory tests to evaluate mechanical properties and performance of various flexible pipes ».
Journal of Performance of Constructed Facilities, vol. 29, nº 5.
Chamanfar, A., Jahazi, M., Bonakdar, A., Morin, E. et Firoozrai, A..
2015.
« Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades ».
Materials Science and Engineering: A, vol. 642.
pp. 230-240.
Chamanfar, A., Jahazi, Mohammad et Cormier, J..
2015.
« A review on inertia and linear friction welding of Ni-based superalloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 46, nº 4.
pp. 1639-1669.
Chamanfar, A., Jahazi, Mohammad, Gholipour, J., Wanjara, P. et Yue, S..
2015.
« Analysis of integrity and microstructure of linear friction welded Waspaloy ».
Materials Characterization, vol. 104.
pp. 149-161.
Chapuis, Robert P., Duhaime, François et Weber, Simon.
2015.
« Simplifying the calculation of equivalent diameter in sedimentation tests ».
Canadian Geotechnical Journal = Revue Canadienne de Géotechnique, vol. 52, nº 8.
pp. 1186-1189.
Chapuis, Robert P., Masse, Isabelle, Madinier, Bénédicte et Duhaime, François.
2015.
« Water-retention curves of coarse soils without organic matter : Improved data for improved predictions ».
Geotechnical Testing Journal, vol. 38, nº 3.
pp. 325-337.
Chapuis, Robert P., Weber, Simon et Duhaime, François.
2015.
« Permeability test results with packed spheres and non-plastic soils ».
Geotechnical Testing Journal, vol. 38, nº 6.
pp. 950-964.
Chehouri, Adam, Younes, Rafic, Ilinca, Adrian et Perron, Jean.
2015.
« Review of performance optimization techniques applied to wind turbines ».
Applied Energy, vol. 142.
pp. 361-388.
Chehouri, Adam, Younes, Rafic, Ilinca, Adrian, Perron, Jean et Lakiss, Hassan.
2015.
« Optimal design for a composite wind turbine blade with fatigue and failure constraints ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 39, nº 2.
pp. 171-186.
Chen, Hao et Labbé, Jean-Philippe.
2015.
« Lorentzian Coxeter systems and Boyd–Maxwell ball packings ».
Geometriae Dedicata, vol. 174, nº 1.
pp. 43-73.
Chen, J., Brissette, François et Lucas-Picher, P..
2015.
« Assessing the limits of bias-correcting climate model outputs for climate change impact studies ».
Journal of Geophysical Research D: Atmospheres, vol. 120, nº 3.
pp. 1123-1136.
Chen, Jie et Brissette, François.
2015.
« Combining stochastic weather generation and ensemble weather forecasts for short-term streamflow prediction ».
Water Resources Management, vol. 29, nº 9.
pp. 3329-3342.
Chen, Jie, Brissette, François P. et Zielinski, Przemyslaw A..
2015.
« Constraining frequency distributions with the probable maximum precipitation for the stochastic generation of realistic extreme events ».
Journal of Extreme Events, vol. 02, nº 02.
Cheng, E., Ahmadi, A. et Cheung, K. C..
2015.
« Measurement of the oscillatory flow field inside tapered cylindrical inkjet nozzles using micro-particle image velocimetry ».
Microfluidics and Nanofluidics, vol. 19, nº 3.
pp. 635-646.
Cheng, Jianhua, Qi, Bing, Chen, Daidai et Landry, René Jr.
2015.
« Modification of an RBF ANN-based temperature compensation model of interferometric fiber optical gyroscopes ».
Sensors, vol. 15, nº 5.
pp. 11189-11207.
Chénier, Félix, Bigras, Pascal et Aissaoui, Rachid.
2015.
« A new dynamic model of the wheelchair propulsion on straight and curvilinear level-ground paths ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 18, nº 10.
pp. 1031-1043.
Chergui, Nacera, Lateb, Mohamed, Lacroix, Etienne et Dufresne, Louis.
2015.
« CFD study of flow dynamics in a blade free planetary mixer (BFPM) - A qualitative flow study ».
Chemical Engineering Research and Design, vol. 102, nº 1.
pp. 100-115.
Cherifi, Ahmed, Dubois, Mario, Gardoni, Mickaël et Tairi, Abdelaziz.
2015.
« Methodology for innovative eco-design based on TRIZ ».
International Journal on Interactive Design and Manufacturing, vol. 9, nº 3.
pp. 167-175.
Chikh, A. et Chandra, Ambrish.
2015.
« An optimal maximum power point tracking algorithm for PV systems with climatic parameters estimation ».
IEEE Transactions on Sustainable Energy, vol. 6, nº 2.
pp. 644-652.
Chossat, Jean-Baptiste, Shin, Hee-Sup, Park, Yong-Lae et Duchaine, Vincent.
2015.
« Soft tactile skin using an embedded ionic liquid and tomographic imaging ».
Journal of Mechanisms and Robotics, vol. 7, nº 2.
Chowdhury, R. A., Zerouali, Y., Hedrich, T., Heers, M., Kobayashi, E., Lina, Jean-Marc et Grova, C..
2015.
« MEG–EEG information fusion and electromagnetic source imaging: from theory to clinical application in epilepsy ».
Brain Topography, vol. 28, nº 6.
pp. 785-812.
Clément, J., Cresson, T., Hagemeister, N., Dumas, R. et de Guise, J. A..
2015.
« Estimating joint space of the knee during weight-bearing squatting activity using motion capture – preliminary results of a new method ».
[Article de conférence]. Computer Methods in Biomechanics and Biomedical Engineering, vol. 18, nº Suppl. 1.
pp. 1910-1911.
Clément, Julien, Dumas, Raphaël, Hagemeister, Nicola et de Guise, Jacques A..
2015.
« Soft tissue artifact compensation in knee kinematics by multi-body optimization: Performance of subject-specific knee joint models ».
Journal of Biomechanics, vol. 48, nº 14.
pp. 3796-3802.
Cloutis, Edward A., Mann, Paul, Izawa, Matthew R. M., Applin, Daniel M., Samson, Claire, Kruzelecky, Roman, Glotch, Timothy D., Mertzman, Stanley A., Mertzman, Karen R., Haltigin, Timothy W. et Fry, Christopher.
2015.
« The Canadian space agency planetary analogue materials suite ».
Planetary and Space Science, vol. 119.
pp. 155-172.
Cruz, Rafael M. O., Sabourin, Robert, Cavalcanti, George D. C. et Ing Ren, Tsang.
2015.
« META-DES: A dynamic ensemble selection framework using meta-learning ».
Pattern Recognition, vol. 48, nº 5.
pp. 1925-1935.
Daoud, M., Chatelain, J. F. et Bouzid, A..
2015.
« Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 9-12.
pp. 1987-1997.
Daoud, M., Jomaa, W., Chatelain, J. F. et Bouzid, A..
2015.
« A machining-based methodology to identify material constitutive law for finite element simulation ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 9-12.
pp. 2019-2033.
Daoust, Marc-Kevin.
2015.
« Repenser la neutralité axiologique : Objectivité, autonomie et délibération publique ».
Revue Européenne des Sciences Sociales, vol. 53, nº 1.
pp. 199-225.
D'Avignon, Katherine et Kummert, Michaël.
2015.
« Assessment of T-history method variants to obtain enthalpy–temperature curves for phase change materials with significant subcooling ».
Journal of Thermal Science and Engineering Applications, vol. 7, nº 4.
De Almeida, Paulo R. L., Oliveira, Luiz S., Britto, Alceu S., Silva, Eunelson J. et Koerich, Alessandro L..
2015.
« PKLot-A robust dataset for parking lot classification ».
Expert Systems with Applications, vol. 42, nº 11.
pp. 4937-4949.
de Filippi, Giancarlo Azevedo et Melhado, Silvio Burratino.
2015.
« Um estudo sobre as causas de atrasos de obras de empreendimentos imobiliários na região Metropolitana de São Paulo ».
Ambiente Construído, vol. 15, nº 3.
pp. 161-173.
de Guise, J. A..
2015.
« KneeKG: A Canadian example of participative innovation in orthopaedic functional evaluation ».
[Résumé d'une communication à une conférence]. Annals of Physical and Rehabilitation Medicine, vol. 58, nº Suppl. 1.
e52.
De-la-Torre, Miguel, Granger, Éric, Radtke, Paulo V. W., Sabourin, Robert et Gorodnichy, Dmitry O..
2015.
« Partially-supervised learning from facial trajectories for face recognition in video surveillance ».
Information Fusion, vol. 24.
pp. 31-53.
De-la-Torre, Miguel, Granger, Éric, Sabourin, Robert et Gorodnichy, Dmitry O..
2015.
« Adaptive skew-sensitive ensembles for face recognition in video surveillance ».
Pattern Recognition, vol. 48, nº 11.
pp. 3385-3406.
De-la-Torre, Miguel, Granger, Éric, Sabourin, Robert et Gorodnichy, Dmitry O..
2015.
« An adaptive ensemble-based system for face recognition in person re-identification ».
Machine Vision and Applications, vol. 26, nº 6.
pp. 741-773.
De-la-Torre, Miguel, Granger, Eric, Sabourin, Robert et Gorodnichy, Dmitry O..
2015.
« Individual-specific management of reference data in adaptive ensembles for face re-identification ».
IET Computer Vision, vol. 9, nº 5.
pp. 732-740.
Dembele, Kadiatou Therese, Selopal, Gurpreet Singh, Milan, Riccardo, Trudeau, Charles, Benetti, Daniele, Soudi, Afsoon, Natile, Marta Maria, Sberveglieri, Giorgio, Cloutier, Sylvain, Concina, Isabella, Rosei, Federico et Vomiero, Alberto.
2015.
« Graphene below the percolation threshold in TiO2 for dye-sensitized solar cells ».
Journal of Materials Chemistry A, vol. 3, nº 6.
pp. 2580-2588.
Demers, V., Turenne, S. et Scalzo, O..
2015.
« Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy ».
Journal of Materials Science, vol. 50, nº 7.
pp. 2893-2902.
Demers, Vincent, Turenne, Sylvain et Scalzo, Orlando.
2015.
« Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniques ».
Advanced Powder Technology, vol. 26, nº 3.
pp. 997-1004.
Demuth, Andreas, Lopez-Herrejon, Robert Erick et Egyed, Alexander.
2015.
« Constraint-driven modeling through transformation ».
Software and Systems Modeling, vol. 14, nº 2.
pp. 573-596.
Di Labbio, Giuseppe, Kiyanda, Chales Basenga, Mi, Xiao Cheng, Higgins, Andrews Jason, Nikiforakis, Nikolaos et Ng, Hoi Dick.
2015.
« Investigation of detonation propagation through an array of random discrete energy sources using the reactive Burgers' analog ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 60, nº 21.
p. 563.
Doutres, Olivier, Atalla, Noureddine et Osman, Haisam.
2015.
« Transfer matrix modeling and experimental validation of cellular porous material with resonant inclusions ».
Journal of the Acoustical Society of America, vol. 137, nº 6.
pp. 3502-3513.
Doutres, Olivier, Sgard, Franck, Laville, Frédéric, Voix, Jérémie, Bouthot, Olivier, Nélisse, Hugues, Marcotte, Pierre et Boutin, Jérôme.
2015.
« Is my material an efficient acoustical material? ».
Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 2.
pp. 24-25.
Dubé, Jean-Sébastien, Boudreault, Jean-Philippe, Bost, Régis, Sona, Mirela, Duhaime, François et Éthier, Yannic.
2015.
« Representativeness of laboratory sampling procedures for the analysis of trace metals in soil ».
Environmental Science and Pollution Research, vol. 22, nº 15.
pp. 11862-11876.
Dubé, Jonathan, Lafortune, Marjolaine, Bedetti, Christophe, Bouchard, Maude, Gagnon, Jean-François, Doyon, Julien, Evans, Alan C., Lina, Jean-Marc et Carrier, Julie.
2015.
« Cortical thinning explains changes in sleep slow waves during adulthood ».
Journal of Neuroscience, vol. 35, nº 20.
pp. 7795-7807.
Dubé, Martine, Chazerain, Aurélie, Hubert, Pascal, Yousefpour, Ali et Bersee, Harald E. N..
2015.
« Characterization of resistance-welded thermoplastic composite double-lap joints under static and fatigue loading ».
Journal of Thermoplastic Composite Materials, vol. 28, nº 6.
pp. 762-776.
Dubot, Fabien, Favennec, Yann, Rousseau, Benoit et Rousse, Daniel R..
2015.
« A wavelet multi-scale method for the inverse problem of diffuse optical tomography ».
Journal of Computational and Applied Mathematics, vol. 289.
pp. 267-281.
Dubot, Fabien, Favennec, Yann, Rousseau, Benoit et Rousse, Daniel R..
2015.
« Regularization opportunities for the diffuse optical tomography problem ».
International Journal of Thermal Sciences, vol. 98.
Duhaime, François, Chapuis, Robert P. et Weber, Simon.
2015.
« Parasitic head losses during laboratory permeability tests ».
Geotechnical Testing Journal, vol. 38, nº 2.
pp. 255-260.
Dumas, M., McGuffin, Michael John et Chasse, P..
2015.
« VectorLens: angular selection of curves within 2D dense visualizations ».
IEEE Transactions on Visualization and Computer Graphics, vol. 21, nº 3.
pp. 402-412.
Edu, Ioana Raluca, Adochiei, Felix Constantin, Grigorie, Teodor Lucian et Botez, Ruxandra Mihaela.
2015.
« Tuning of a wavelet filter for miniature accelerometers denoising based Joint Symbolic Dynamics (JSD) method ».
INCAS Bulletin, vol. 7, nº 2.
pp. 71-80.
El Aidani, Rachid, Nguyen-Tri, Phuong et Vu-Khanh, Toan.
2015.
« Influence of hydrolytic degradation on properties of moisture membranes used in fire-protective clothing ».
International Journal of Chemical and Molecular Engineering, vol. 9, nº 9.
pp. 1135-1139.
El Barachi, May, Kara, Nadjia, Rabah, Sleiman et Forgues, Mathieu.
2015.
« An open virtual multi-services networking architecture for the future internet ».
Journal of Internet Services and Applications, vol. 6, nº 1.
El-Saikaly, G. et Chaallal, Omar.
2015.
« Extending the fatigue life of reinforced concrete T-beams strengthened in shear with externally bonded FRP: upgrading versus repairing ».
Journal of Composites for Construction, vol. 19, nº 1.
El-Saikaly, Georges et Chaallal, Omar.
2015.
« Cyclic performance of reinforced concrete T-beams strengthened in shear with fiber-reinforced polymer composites: Sheets versus laminates ».
Journal of Reinforced Plastics and Composites, vol. 34, nº 13.
pp. 1040-1058.
El-Saikaly, Georges et Chaallal, Omar.
2015.
« Fatigue behavior of RC T-beams strengthened in shear with EB CFRP L-shaped laminates ».
Composites Part B: Engineering, vol. 68.
pp. 100-112.
El-Saikaly, Georges, Godat, Ahmed et Chaallal, Omar.
2015.
« New anchorage technique for FRP shear-strengthened RC T-beams using CFRP rope ».
Journal of Composites for Construction, vol. 19, nº 4.
Elsayed, Mohannad Y., Cicek, Paul-Vahe, Nabki, Frederic et El-Gamal, Mourad N..
2015.
« Surface micromachined combined magnetometer/accelerometer for above-IC integration ».
Journal of Microelectromechanical Systems, vol. 24, nº 4.
pp. 1029-1037.
Estrada, Rebeca, Otrok, Hadi, Dziong, Zbigniew et Barada, Hassan.
2015.
« Spectrum sharing model for OFDMA macro-femtocell networks ».
International Journal of Ad Hoc and Ubiquitous Computing, vol. 19, nº 3-4.
pp. 241-253.
Facchinello, Yann, Brailovski, Vladimir, Petit, Yvan, Brummund, Martin, Tremblay, Jaëlle et Mac-Thiong, Jean-Marc.
2015.
« Biomechanical assessment of the stabilization capacity of monolithic spinal rods with different flexural stiffness and anchoring arrangement ».
Clinical Biomechanics, vol. 30, nº 10.
pp. 1026-1035.
Fannou, Jean-Louis Comlan, Rousseau, Clément, Lamarche, Louis et Kajl, Stanislaw.
2015.
« A comparative performance study of a direct expansion geothermal evaporator using R410A and R407C as refrigerant alternatives to R22 ».
Applied Thermal Engineering, vol. 82.
pp. 306-317.
Fareh, Raouf, Saad, Mohamad et Saad, Maarouf.
2015.
« Distributed control strategy for flexible link manipulators ».
Robotica, vol. 33, nº 4.
pp. 768-786.
Ferrari, Giovanni et Amabili, Marco.
2015.
« Active vibration control of a sandwich plate by non-collocated positive position feedback ».
Journal of Sound and Vibration, vol. 342.
pp. 44-56.
Feurtey, Evariste, Ilinca, Adrian, Sakout, Anas et Saucier, Carol.
2015.
« Lessons learned in France and Quebec regarding financial and legal mechanisms to develop renewable energy: A hybrid model as an acceptable solution for onshore wind? ».
Renewable and Sustainable Energy Reviews, vol. 47.
pp. 34-45.
Forgues, Daniel et Lejeune, Albert.
2015.
« BIM: in search of the organisational architect ».
International Journal of Project Organisation and Management, vol. 7, nº 3.
pp. 270-283.
Forouzanfar, Mohamad, Ahmad, Saif, Batkin, Izmail, Dajani, Hilmi R., Groza, Voicu Z. et Bolic, Miodrag.
2015.
« Model-based mean arterial pressure estimation using simultaneous electrocardiogram and oscillometric blood pressure measurements ».
IEEE Transactions on Instrumentation and Measurement, vol. 64, nº 9.
pp. 2443-2452.
Forouzanfar, Mohamad, Dajani, Hilmi R., Groza, Voicu Z., Bolic, Miodrag, Rajan, Sreeraman et Batkin, Izmail.
2015.
« Oscillometric blood pressure estimation: Past, present, and future ».
IEEE Reviews in Biomedical Engineering, vol. 8.
pp. 44-63.
Fortin, Marc-Antoine, Bourdeau, Francis et Landry, René Jr..
2015.
« Implementation strategies for a software-compensated FFT-based generic acquisition architecture with minimal FPGA resources ».
Navigation : Journal of the Institute of Navigation, vol. 62, nº 3.
pp. 171-188.
Fosso Pouangué, A., Sanjosé, M., Moreau, S., Daviller, G. et Deniau, H..
2015.
« Subsonic jet noise simulations using both structured and unstructured grids ».
AIAA Journal, vol. 53, nº 1.
pp. 55-69.
Fouquet, Mariane, Levasseur, Annie, Margni, Manuele, Lebert, Alexandra, Lasvaux, Sébastien, Souyri, Bernard, Buhé, Catherine et Woloszyn, Monika.
2015.
« Methodological challenges and developments in LCA of low energy buildings: Application to biogenic carbon and global warming assessment ».
Building and Environment, vol. 90.
pp. 51-59.
Francie, Kouedeu Annie, Jean-Pierre, Kenne, Pierre, Dejax, Victor, Songmene et Vladimir, Polotski.
2015.
« Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ».
Journal of Manufacturing Systems, vol. 37, nº Part 3.
pp. 662-671.
Fridman, Moti, Okawachi, Yoshitomo, Clemmen, Stéphane, Ménard, Michaël, Lipson, Michal et Gaeta, Alexander L..
2015.
« Waveguide-based single-shot temporal cross-correlator ».
Journal of Optics, vol. 17, nº 3.
Gabet, R., Le Cren, E., Jin, C., Gadonna, M., Ung, Bora, Sillard, P., Nguyen, H. G., Jaouën, Y., Thual, M. et Larochelle, S..
2015.
« Complete dispersion characterization of few mode fibers by OLCI technique ».
Journal of Lightwave Technology, vol. 33, nº 6.
pp. 1155-1160.
Gadhoumi, K., Gotman, J. et Lina, Jean-Marc.
2015.
« Scale invariance properties of intracerebral eeg improve seizure prediction in mesial temporal lobe epilepsy ».
PLoS ONE, vol. 10, nº 4.
Gagnon, Dany, Babineau, Annie-Claude, Champagne, Audrey, Desroches, Guillaume et Aissaoui, Rachid.
2015.
« Trunk and shoulder kinematic and kinetic and electromyographic adaptations to slope increase during motorized treadmill propulsion among manual wheelchair users with a spinal cord injury ».
BioMed Research International, vol. 2015.
p. 15.
Gao, Y., Zhu, L., Cates, J., MacLeod, R. S., Bouix, S. et Tannenbaum, A..
2015.
« A Kalman filtering perspective for multiatlas segmentation ».
SIAM Journal on Imaging Sciences, vol. 8, nº 2.
pp. 1007-1029.
Garcia, J., Coste, A., Tavares, W., Nuño, N. et Lachapelle, K..
2015.
« Assessment of competency during orotracheal intubation in medical simulation ».
British Journal of Anaesthesia, vol. 115, nº 2.
pp. 302-307.
Garcia-Alvarado, M. S., Paquet, Marc et Chaabane, Amin.
2015.
« On inventory control of product recovery systems subject to environmental mechanisms ».
International Journal of Production Economics, vol. 165.
pp. 132-144.
Garza, Jennifer L., Cavallari, Jennifer M., Eijckelhof, Belinda H. W., Huysmans, Maaike A., Thamsuwan, Ornwipa, Johnson, Peter W., van der Beek, Allard J. et Dennerlein, Jack T..
2015.
« Office workers with high effort–reward imbalance and overcommitment have greater decreases in heart rate variability over a 2-h working period ».
International Archives of Occupational and Environmental Health, vol. 88, nº 5.
pp. 565-575.
Gauvin, Mathieu, Little, John M., Lina, Jean-Marc et Lachapelle, Pierre.
2015.
« Functional decomposition of the human ERG based on the discrete wavelet transform ».
Journal of Vision, vol. 15, nº 16.
Gazafrudi, S. M. M., Tabakhpour Langerudy, A., Fuchs, E. F. et Al Haddad, Kamal.
2015.
« Power quality issues in railway electrification: a comprehensive perspective ».
IEEE Transactions on Industrial Electronics, vol. 62, nº 5.
pp. 3081-3090.
Ghaffari Mosanenzadeh, Shahrzad, Doutres, Olivier, Naguib, Hani E., Park, Chul B. et Atalla, Noureddine.
2015.
« A numerical scheme for investigating the effect of bimodal structure on acoustic behavior of polylactide foams ».
Applied Acoustics, vol. 88.
pp. 75-83.
Ghaffari Mosanenzadeh, Shahrzad, Doutres, Olivier, Naguib, Hani E., Park, Chul B. et Atalla, Noureddine.
2015.
« A semi-empirical model relating micro structure to acoustic properties of bimodal porous material ».
Journal of Applied Physics, vol. 117, nº 3.
034305.
Ghasemi Nanesa, H. et Jahazi, Mohammad.
2015.
« Alternative phase transformation path in cryogenically treated AISI D2 tool steel ».
Materials Science and Engineering: A, vol. 634.
pp. 32-36.
Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Naraghi, Reza.
2015.
« Martensitic transformation in AISI D2 tool steel during continuous cooling to 173K ».
Journal of Materials Science, vol. 50, nº 17.
pp. 5758-5768.
Ghazi, Georges, Botez, Ruxandra et Messi Achigui, Joseph.
2015.
« Cessna citation X engine model identification from flight tests ».
SAE International Journal of Aerospace, vol. 8, nº 2.
pp. 203-213.
Ghezal, Aïcha et Assaf, Gabriel J..
2015.
« Restrained shrinkage cracking of self-consolidating concrete ».
Journal of Materials in Civil Engineering, vol. 27, nº 10.
Ghommam, Jawhar, Charland, Guillaume et Saad, Maarouf.
2015.
« Three-dimensional constrained tracking control via exact differentiation estimator of a quadrotor helicopter ».
Asian Journal of Control, vol. 17, nº 3.
pp. 1093-1103.
Giard, P., Sarkis, G., Thibeault, Claude et Gross, W. J..
2015.
« 237 Gbit/s unrolled hardware polar decoder ».
Electronics Letters, vol. 51, nº 10.
pp. 762-763.
Giret, Jean-Christophe, Sengissen, Alois, Moreau, Stéphane, Sanjosé, Marlène et Jouhaud, Jean-Christophe.
2015.
« Noise source analysis of a rod–airfoil configuration using unstructured large-eddy simulation ».
AIAA Journal, vol. 53, nº 4.
pp. 1062-1077.
Gonfa, Belete Atomsa, Kim, Mee Rahn, Delegan, Nazar, Tavares, Ana C., Izquierdo, Ricardo, Wu, Nianqiang, El Khakani, My Ali et Ma, Dongling.
2015.
« Towards high efficiency air-processed near-infrared responsive photovoltaics: Bulk heterojunction solar cells based on PbS/CdS core-shell quantum dots and TiO2 nanorod arrays ».
Nanoscale, vol. 7, nº 22.
pp. 10039-10049.
Gonfaus, Josep M., Pedersoli, Marco, Gonzàlez, Jordi, Vedaldi, Andrea et Roca, F. Xavier.
2015.
« Factorized appearances for object detection ».
Computer Vision and Image Understanding, vol. 138.
pp. 92-101.
Gonzalez, Ernesto D. R. S., Sarkis, Joseph, Huisingh, Donald, Huatuco, Luisa H., Maculan, Nelson, Montoya-Torres, Jairo R. et De Almeida, Cecilia M. V. B..
2015.
« Making real progress toward more sustainable societies using decision support models and tools: Introduction to the special volume ».
Journal of Cleaner Production, vol. 105.
pp. 1-13.
Gooré Bi, E., Monette, Frédéric et Gasperi, J..
2015.
« Analysis of the influence of rainfall variables on urban effluents concentrations and fluxes in wet weather ».
Journal of Hydrology, vol. 523.
pp. 320-332.
Gooré Bi, Eustache, Monette, Frederic, Gasperi, Johnny et Perrodin, Yves.
2015.
« Assessment of the ecotoxicological risk of combined sewer overflows for an aquatic system using a coupled “substance and bioassay” approach ».
Environmental Science and Pollution Research, vol. 22, nº 6.
pp. 4460-4474.
Gordon, Ryan P., Lautz, Laura K., McKenzie, Jeffrey M., Mark, Bryan G., Chavez, Daniel et Baraer, Michel.
2015.
« Sources and pathways of stream generation in tropical proglacial valleys of the Cordillera Blanca, Peru ».
Journal of Hydrology, vol. 522.
pp. 628-644.
Gotra, Akshat, Chartrand, Gabriel, Massicotte-Tisluck, Karine, Morin-Roy, Florence, Vandenbroucke-Menu, Franck, de Guise, Jacques A. et Tang, An.
2015.
« Validation of a semiautomated liver segmentation method using CT for accurate volumetry ».
Academic Radiology, vol. 22, nº 9.
pp. 1088-1098.
Grégoire, Luc-André, Fortin Blanchette, Handy, Li, Wei, Antonopoulos, Antonios, Angquist, Lennart et Al Haddad, Kamal.
2015.
« Modular multilevel converters overvoltage diagnosis and remedial strategy during blocking sequences ».
IEEE Transactions on Power Electronics, vol. 30, nº 5.
pp. 2777-2785.
Grigorie, T. L., Botez, Ruxandra et Popov, A. V..
2015.
« How the airfoil shape of a morphing wing is actuated and controlled in a smart way ».
Journal of Aerospace Engineering, vol. 28, nº 1.
Grigorie, Teodor Lucian et Botez, Ruxandra Mihaela.
2015.
« Positioning monitoring improvement in a horizontal plane INS by using fuzzy logic data fusion for denoising of inertial sensors in redundant clusters ».
International Journal of Fuzzy Systems and Advanced Applications, vol. 2.
pp. 33-40.
Guessoum, Djamel, Miraoui, Moeiz et Tadj, Chakib.
2015.
« Survey of semantic similarity measures in pervasive computing ».
International Journal on Smart Sensing and Intelligent Systems, vol. 8, nº 1.
pp. 125-158.
Guilbault, Raynald, Lalonde, Sébastien et Thomas, Marc.
2015.
« Modeling and monitoring of tooth fillet crack growth in dynamic simulation of spur gear set ».
Journal of Sound and Vibration, vol. 343.
pp. 144-165.
Guillon, Laura, Quesada, Guillermo et Rousse, Daniel R..
2015.
« An experimental validation of the concept critical solar radiation for solar tracking systems ».
International Journal of Applied Science and Technology, vol. 5, nº 3.
Guillot, Martin, Chartrand, Gabriel, Chav, Ramnada, Rousseau, Jacques, Beaudoin, Jean-François, Martel-Pelletier, Johanne, Pelletier, Jean-Pierre, Lecomte, Roger, de Guise, Jacques A. et Troncy, Eric.
2015.
« [18F]-fluorodeoxyglucose positron emission tomography of the cat brain: a feasibility study to investigate osteoarthritis-associated pain ».
The Veterinary Journal, vol. 204, nº 3.
pp. 299-303.
Guillot, Martin, Gravel, Pierre, Gauthier, Marie-Lou, Leblond, Hugues, Tremblay, Maurice, Rossignol, Serge, Martel-Pelletier, Johanne, Pelletier, Jean-Pierre, de Guise, Jacques A. et Troncy, Eric.
2015.
« Coxofemoral joint kinematics using video fluoroscopic images of treadmill-walking cats: development of a technique to assess osteoarthritis-associated disability ».
Journal of Feline Medicine and Surgery, vol. 17, nº 2.
pp. 134-143.
Guizani, Lotfi, Bonnell, William et Chaallal, Omar.
2015.
« Fatigue testing and performance of welded single-support bar modular bridge joints ».
Journal of Bridge Engineering, vol. 20, nº 5.
Gunderov, D. V., Churakova, A. A., Lukianov, A. V., Prokofiev, E. A., Prokoshkin, S. D., Kreizberg, A. Y., Raab, G. I. et Sabirov, I. N..
2015.
« Investigation of the deformation activation volume of an ultrafinegrained Ti50Ni50 Alloy ».
Russian Physics Journal, vol. 58, nº 6.
pp. 864-868.
Gunderov, D. V., Maksutova, G., Churakova, A., Lukyanov, A., Kreitcberg, A., Raab, G. I., Sabirov, I. et Prokoshkin, S..
2015.
« Strain rate sensitivity and deformation activation volume of coarse-grained and ultrafine-grained TiNi alloys ».
Scripta Materialia, vol. 102.
pp. 99-102.
Guo, Meng, Fréchette, Michel, David, Eric et Demarquette, Nicole R..
2015.
« Polyethylene-based dielectric composites containing polyhedral oligomeric SilSesquioxanes obtained by ball milling ».
Transactions on Electrical and Electronic Materials, vol. 16, nº 2.
pp. 53-61.
Hafez, Hassan A., Al-Naib, Ibraheem, Dignam, Marc M., Sekine, Yoshiaki, Oguri, Katsuya, Blanchard, François, Cooke, David G., Tanaka, Satoru, Komori, Fumio, Hibino, Hiroki et Ozaki, Tsuneyuki.
2015.
« Nonlinear terahertz field-induced carrier dynamics in photoexcited epitaxial monolayer graphene ».
Physical Review B, vol. 91, nº 3.
035422.
Haguma, D., Leconte, R., Krau, S., Cote, P. et Brissette, François.
2015.
« Water resources optimization method in the context of climate change ».
Journal of Water Resources Planning and Management, vol. 141, nº 2.
Haguma, Didier, Leconte, Robert et Brissette, François.
2015.
« Évaluation du régime hydrologique du bassin versant de la rivière Manicouagan, au Québec, dans le contexte des changements climatiques ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 42, nº 2.
pp. 98-106.
Hai, Mohammed Shafiqul, Ménard, Michaël et Liboiron-Ladouceur, Odile.
2015.
« Integrated optical deserialiser time sampling based SiGe photoreceiver ».
Optics Express, vol. 23, nº 25.
pp. 31736-31754.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2015.
« A decision optimization model for leased manufacturing equipment with warranty under forecasting production/maintenance problem ».
Mathematical Problems in Engineering, vol. 2015.
Hallé, Stéphane, Nadeau, Sylvie et Fatisson, Julien.
2015.
« Engineered containment and control of airborne nanoparticles: current status ».
International Journal of Safety and Security Engineering, vol. 5, nº 4.
pp. 336-351.
Hamid Pourian, Meysam, Pilvin, Philippe, Bridier, Florent et Bocher, Philippe.
2015.
« Modeling the elastoplastic behaviors of alpha Ti-alloys microstructure using Cellular Automaton and finite element methods ».
Computational Materials Science, vol. 99.
pp. 33-42.
Hamouda, Mahmoud, Fortin Blanchette, Handy et Al Haddad, Kamal.
2015.
« Indirect matrix converters' enhanced commutation method ».
IEEE Transactions on Industrial Electronics, vol. 62, nº 2.
pp. 671-679.
Harker, Matthew et O’Leary, Paul.
2015.
« Regularized reconstruction of a surface from its measured gradient field: Algorithms for spectral, tikhonov, constrained, and weighted regularization ».
Journal of Mathematical Imaging and Vision, vol. 51, nº 1.
pp. 46-70.
Hedjam, Rachid, Nafchi, Hossein Ziaei, Kalacska, Margaret et Cheriet, Mohamed.
2015.
« Influence of color-to-gray conversion on the performance of document image binarization: toward a novel optimization problem ».
IEEE Transactions on Image Processing, vol. 24, nº 11.
pp. 3637-3651.
Heid, T., Fréchette, M. et David, É..
2015.
« Functional epoxy composites for high voltage insulation involving c-BN and reactive POSS as compatibilizer ».
Journal of Materials Science, vol. 50, nº 16.
pp. 5494-5503.
Heid, T., Frechette, M. et David, Eric.
2015.
« Epoxy/BN micro- and submicro-composites: dielectric and thermal properties of enhanced materials for high voltage insulation systems ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 22, nº 2.
pp. 1176-1185.
Heid, Thomas, Frechette, Michel et David, Éric.
2015.
« Nanostructured epoxy/POSS composites: enhanced materials for high voltage insulation applications ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 22, nº 3.
pp. 1594-1604.
Helal, E., Demarquette, Nicole R., Amurin, L. G., David, Éric, Carastan, D. J. et Fréchette, M..
2015.
« Styrenic block copolymer-based nanocomposites: Implications of nanostructuration and nanofiller tailored dispersion on the dielectric properties ».
Polymer, vol. 64.
pp. 139-152.
Herazo-Padilla, N., Montoya-Torres, J. R., Nieto Isaza, S. et Alvarado-Valencia, J..
2015.
« Simulation-optimization approach for the stochastic location-routing problem ».
Journal of Simulation, vol. 9, nº 4.
pp. 296-311.
Hlioui, Rached, Gharbi, Ali et Hajji, Adnène.
2015.
« Integrated quality strategy in production and raw material replenishment in a manufacturing-oriented supply chain ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 1-4.
pp. 335-348.
Hlioui, Rached, Gharbi, Ali et Hajji, Adnène.
2015.
« Replenishment, production and quality control strategies in three-stage supply chain ».
International Journal of Production Economics, vol. 166.
pp. 90-102.
Ho, S. L., Wang, Qingsong, Niu, Shuangxia et Fu, W. N..
2015.
« A novel magnetic-geared tubular linear machine with halbach permanent-magnet arrays for tidal energy conversion ».
IEEE Transactions on Magnetics, vol. 51, nº 11.
Hobeika, Christelle, Thibeault, Claude et Boland, Jean-François.
2015.
« Functional constraint extraction from register transfer level for ATPG ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 23, nº 2.
pp. 407-412.
Honarparast, Sara et Chaallal, Omar.
2015.
« Seismic upgrading of RC coupled shear walls: state of the art and research needs ».
Global Journal of Advanced Engineering Technologies and Sciences, vol. 2, nº 12.
pp. 1-19.
Hong, Yi, Gao, Yi, Niethammer, Marc et Bouix, Sylvain.
2015.
« Shape analysis based on depth-ordering ».
Medical Image Analysis, vol. 25, nº 1.
pp. 2-10.
Hu, Xiaofeng, Cao, Pan, Wu, Jiayang, Mao, Junming, Lv, Jianxin, Jiang, Yuling, Qiu, Ciyuan, Tremblay, Christine et Su, Yikai.
2015.
« High-capacity and low-cost long-reach OFDMA PON based on distance-adaptive bandwidth allocation ».
Optics Express, vol. 23, nº 2.
pp. 1249-1255.
Huang, Ying, Wang, Xingjun, Gardoni, Mickaël et Coulibaly, Amadou.
2015.
« Task-oriented adaptive maintenance support system ».
Journal of Computing and Information Science in Engineering, vol. 15, nº 3.
Huerta, Ivan, Pedersoli, Marco, Gonzàlez, Jordi et Sanfeliu, Albert.
2015.
« Combining where and what in change detection for unsupervised foreground learning in surveillance ».
Pattern Recognition, vol. 48, nº 3.
pp. 709-719.
Hussain, Wasim, Blaquière, Yves et Savaria, Yvon.
2015.
« An interface for open-drain bidirectional communication in field programmable interconnection networks ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 62, nº 10.
pp. 2465-2475.
Iglesias, Victor, Grajal, Jesus, Royer, Pablo, Sanchez, Miguel A., Lopez-Vallejo, Marisa et Yeste-Ojeda, Omar A..
2015.
« Real-time low complexity automatic modulation classifier for pulsed radar signals ».
IEEE Transactions on Aerospace and Electronic Systems, vol. 51, nº 1.
pp. 108-126.
Imaouchen, Yacine, Alkama, Rezak et Thomas, Marc.
2015.
« Complexity based on synchrosqueezing analysis in gear diagnosis ».
Mechanics and Industry, vol. 16, nº 5.
Inaekyan, K., Brailovski, Vladimir, Prokoshkin, S., Pushin, V., Dubinskiy, S. et Sheremetyev, V..
2015.
« Comparative study of structure formation and mechanical behavior of age-hardened Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys ».
Materials Characterization, vol. 103.
pp. 65-74.
Jalani, Ghulam, Naccache, Rafik, Rosenzweig, Derek H., Lerouge, Sophie, Haglund, Lisbet, Vetrone, Fiorenzo et Cerruti, Marta.
2015.
« Real-time, non-invasive monitoring of hydrogel degradation using LiYF4:Yb3+/Tm3+ NIR-to-NIR upconverting nanoparticles ».
Nanoscale, vol. 7, nº 26.
pp. 11255-11262.
Javadi, A. et Al Haddad, Kamal.
2015.
« A single-phase active device for power quality improvement of electrified transportation ».
IEEE Transactions on Industrial Electronics, vol. 62, nº 5.
pp. 3033-3041.
Jiménez-Narvaez, Luz-Maria et Gardoni, Mickaël.
2015.
« Project management of transfer from space to the earth: Supporting open-collaborative projects in the Canadian Space Agency ».
Journal of Modern Project Management, vol. 3, nº 1.
pp. 80-87.
Jimnez-Narvaez, Luz Maria et Gardoni, Mickaël.
2015.
« Harnessing idea management in the process of technology transfer at Canadian Space Agency ».
International Journal on Interactive Design and Manufacturing, nº 3.
pp. 247-252.
Jin, Cang, Ung, Bora, Messaddeq, Younès et LaRochelle, Sophie.
2015.
« Annular-cladding erbium doped multicore fiber for SDM amplification ».
Optics Express, vol. 23, nº 23.
pp. 29647-29659.
Joubair, A., Zhao, L. F., Bigras, Pascal et Bonev, Ilian.
2015.
« Absolute accuracy analysis and improvement of a hybrid 6-DOF medical robot ».
Industrial Robot, vol. 42, nº 1.
pp. 44-53.
Joubair, Ahmed et Bonev, Ilian A..
2015.
« Kinematic calibration of a six-axis serial robot using distance and sphere constraints ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 1-4.
pp. 515-523.
Joubair, Ahmed et Bonev, Ilian A..
2015.
« Non-kinematic calibration of a six-axis serial robot using planar constraints ».
Precision Engineering, vol. 40.
pp. 325-333.
Kaddoum, Georges, Ahmed, Mohammed F. A. et Nijsure, Yogesh.
2015.
« Code index modulation: a high data rate and energy efficient communication system ».
IEEE Communications Letters, vol. 19, nº 2.
pp. 175-178.
Kaddoum, Georges et Shokraneh, Farhad.
2015.
« Analog network coding for multi-user multi-carrier differential chaos shift keying communication system ».
IEEE Transactions on Wireless Communications, vol. 14, nº 3.
pp. 1492-1505.
Kaddoum, Georges, Soujeri, Ebrahim, Arcila, Carlos et Eshteiwi, Khaled.
2015.
« I-DCSK: An improved noncoherent communication system architecture ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 62, nº 9.
pp. 901-905.
Kadri, Soumaya, Dhifaoui, Belgacem, Dutil, Yvan, Jabrallah, Sadok Ben et Rousse, Daniel R..
2015.
« Large-scale experimental study of a phase change material: shape identification for the Solid-Liquid interface ».
International Journal of Thermophysics, vol. 36, nº 10.
pp. 2897-2915.
Kamkar, N., Bridier, F., Jedrzejowski, P. et Bocher, Philippe.
2015.
« Water droplet impact erosion damage initiation in forged Ti-6Al-4V ».
Wear, vol. 322-323.
pp. 192-202.
Kanaan, Hadi Y., Somers, Cedric et Al Haddad, Kamal.
2015.
« Power factor correction with a modified Sheppard-Taylor topology operating in discontinuous capacitor voltage mode and low output voltage ».
IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, nº 2.
pp. 430-439.
Kanhonou, M., Cresson, T., Clément, J., Lavoie, F., Hagemeister, N. et de Guise, J. A..
2015.
« 2D/3D registration of personalized knee 3D models on biplane radiographs for morpho-functional study ».
[Résumé d'une communication à une conférence]. International Journal of Computer Assisted Radiology and Surgery, vol. 9, nº suppl. 1.
S31-S34.
Kanhonou, M., Cresson, T., Clément, J., Lavoie, F., Hagemeister, N. et de Guise, J. A..
2015.
« A method to evaluate the 3D pseudo-kinematic of the osteoarthritic knee ».
[Résumé d'une communication à une conférence]. Osteoarthritis and Cartilage, vol. 23, nº Suppl. 2.
A117-A118.
Karray, Mourad, Romdhan, Mohamed Ben, Hussien, Mahmoud N. et Éthier, Yannic.
2015.
« Measuring shear wave velocity of granular material using the piezoelectric ring-actuator technique (P-RAT) ».
Canadian Geotechnical Journal = Revue Canadienne de Géotechnique, vol. 52, nº 9.
pp. 1302-1317.
Kaur, Kuljeet, Dua, Amit, Jindal, Anish, Kumar, Neeraj, Singh, Mukesh et Vinel, Alexey.
2015.
« A novel resource reservation scheme for mobile PHEVs in V2G environment using game theoretical approach ».
IEEE Transactions on Vehicular Technology, vol. 64, nº 12.
pp. 5653-5666.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2015.
« Prediction of gas flow in compressible and low permeability porous media ».
Journal of Fluid Science and Technology, vol. 10, nº 2.
Kazeminia, Mehdi et Bouzid, Hakim.
2015.
« Stress analysis of packed stuffing-boxes ».
Journal of Pressure Vessel Technology, vol. 137, nº 5.
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2015.
« A hybrid method combining Teager Kaiser energy operator, empirical mode decomposition and minimum entropy deconvolution for monitoring gears damages ».
Mechanics and Industry, vol. 16, nº 6.
Kedadouche, Mourad, Thomas, Marc, Tahan, Antoine et Guilbault, Raynald.
2015.
« Nonlinear parameters for monitoring gear: comparison between lempel-ziv, approximate entropy, and sample entropy complexity ».
Shock and Vibration, vol. 2015.
Kersten-Oertel, Marta, Gerard, Ian, Drouin, Simon, Mok, Kelvin, Sirhan, Denis, Sinclair, David S. et Collins, D. Louis.
2015.
« Augmented reality in neurovascular surgery: feasibility and first uses in the operating room ».
International Journal of Computer Assisted Radiology and Surgery, vol. 10, nº 11.
pp. 1823-1836.
Khakpour, Hamed, Birglen, Lionel et Tahan, Souheil-Antoine.
2015.
« Analysis and optimization of a new differentially driven cable parallel robot ».
Journal of Mechanisms and Robotics, vol. 7, nº 3.
Khakpour, Hamed, Birglen, Lionel et Tahan, Souheil-Antoine.
2015.
« Uniform scanning path generation for abrasive waterjet polishing of free-form surfaces modeled by triangulated meshes ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 5.
pp. 1167-1176.
Kheddache, Yasmina et Tadj, Chakib.
2015.
« Resonance frequencies behavior in pathologic cries of newborns ».
Journal of Voice, vol. 29, nº 1.
pp. 1-12.
Khou, Jean-Charles, Ghedhaifi, Weeded, Vancassel, Xavier et Garnier, François.
2015.
« Spatial simulation of contrail formation in near-field of commercial aircraft ».
Journal of Aircraft, vol. 52, nº 6.
pp. 1927-1938.
Kikinis, Z., Fitzsimmons, J., Dunn, C., Vu, M. A., Makris, N., Bouix, S., Goldstein, J. M., Mesholam-Gately, R. I., Petryshen, T., del Re, E. C., Wojcik, J., Seidman, L. J. et Kubicki, M..
2015.
« Anterior commissural white matter fiber abnormalities in first-episode psychosis: A tractography study ».
Schizophrenia Research, vol. 162, nº 1-3.
pp. 29-34.
Ko, Albert H. R. et Gagnon, François.
2015.
« Process of 3D wireless decentralized sensor deployment using parsing crossover scheme ».
Applied Computing and Informatics, vol. 11, nº 2.
pp. 89-101.
Ko, Albert Hung-Ren, Jousselme, Anne-Laure, Sabourin, Robert et Gagnon, François.
2015.
« A dominance-based stepwise approach for sensor placement optimization ».
Applied Soft Computing, vol. 28.
pp. 466-482.
Koch, F. L., De Assuncao, M. D., Cardonha, C. H., Netto, M. A. S. et Primo, T. T..
2015.
« An architecture and algorithm for context-aware resource allocation for digital teaching platforms ».
IBM Journal of Research and Development, vol. 59, nº 6.
Koerte, I. K., Lin, A. P., Willems, A., Muehlmann, M., Hufschmidt, J., Coleman, M. J., Green, I., Liao, H., Tate, D. F., Wilde, E. A., Pasternak, O., Bouix, S., Rathi, Y., Bigler, E. D., Stern, R. A. et Shenton, M. E..
2015.
« A review of neuroimaging findings in repetitive brain trauma ».
[Article de conférence]. Brain Pathology, vol. 25, nº 3.
pp. 318-349.
Kouam, Jules, Songmene, Victor, Balazinski, Marek et Hendrick, Patrick.
2015.
« Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy ».
International Journal of Advanced Manufacturing Technology, vol. 79, nº 5.
pp. 1325-1334.
Kouedeu, A. F., Kenné, J.-P., Dejax, P., Songmene, V. et Polotski, V..
2015.
« Production and maintenance planning for a failure-prone deteriorating manufacturing system: a hierarchical control approach ».
International Journal of Advanced Manufacturing Technology, vol. 76, nº 9.
pp. 1607-1619.
Kreitcberg, A., Brailovski, Vladimir, Prokoshkin, S., Gunderov, D., Khomutov, M. et Inaekyan, K..
2015.
« Effect of the grain/subgrain size on the strain-rate sensitivity and deformability of Ti-50at%Ni alloy ».
Materials Science and Engineering A, vol. 622.
pp. 21-29.
Kumar, Neeraj, Kaur, Kuljeet, Jindal, Anish et Rodrigues, Joel J. P. C..
2015.
« Providing healthcare services on-the-fly using multi-player cooperation game theory in Internet of Vehicles (IoV) environment ».
Digital Communications and Networks, vol. 1, nº 3.
pp. 191-203.
Kumar, R., Singh, B., Shahani, D. T., Chandra, Ambrish et Al Haddad, Kamal.
2015.
« Recognition of power-quality disturbances using S-transform-based ANN classifier and rule-based decision tree ».
IEEE Transactions on Industry Applications, vol. 51, nº 2.
pp. 1249-1258.
Kurusu, Rafael S. et Demarquette, Nicole R..
2015.
« Blending and morphology control to turn hydrophobic SEBS electrospun mats superhydrophilic ».
Langmuir, vol. 31, nº 19.
pp. 5495-5503.
Kurusu, Rafael Salles, Siliki, Chris Alexandra, David, Eric, Demarquette, Nicole R., Gauthier, Catherine et Chenal, Jean-Marc.
2015.
« Incorporation of plasticizers in sugarcane-based poly(3-hydroxybutyrate)(PHB): changes in microstructure and properties through ageing and annealing ».
Industrial Crops and Products, vol. 72.
pp. 166-174.
Labbé, David R., Li, Di, Grimard, Guy, de Guise, Jacques A. et Hagemeister, Nicola.
2015.
« Quantitative pivot shift assessment using combined inertial and magnetic sensing ».
Knee Surgery, Sports Traumatology, Arthroscopy, vol. 23, nº 8.
pp. 2330-2338.
Lacasse, Simon, Terriault, Patrick, Simoneau, Charles et Brailovski, Vladimir.
2015.
« Design, manufacturing, and testing of an adaptive composite panel with embedded shape memory alloy actuators ».
Journal of Intelligent Material Systems and Structures, vol. 26, nº 15.
pp. 2055-2072.
Laflamme-Mayer, Nicolas, Blaquière, Yves et Sawan, Mohamad.
2015.
« A configurable analog buffer dedicated to a wafer-scale prototyping platform ».
Analog Integrated Circuits and Signal Processing, vol. 82, nº 1.
pp. 57-66.
Lamarche, Louis.
2015.
« Short-time analysis of vertical boreholes, new analytic solutions and choice of equivalent radius ».
International Journal of Heat and Mass Transfer, vol. 91.
pp. 800-807.
Lamine, Mouhamed, Aidara, Chérif, Ba, Makhaly et Carter, Alan.
2015.
« Measurement of dynamic modulus and master curve modeling of Hot Mix Asphalt from Senegal (West Africa) ».
Studies in Engineering and Technology, vol. 2, nº 1.
pp. 124-135.
Lamothe, Sébastien, Perraton, Daniel et Di Benedetto, Hervé.
2015.
« Contraction and expansion of partially saturated hot mix asphalt samples exposed to freeze-thaw cycles ».
Road Materials and Pavement Design, vol. 16, nº 2.
pp. 277-299.
Lamraoui, Fayal, Benoit, Robert, Perron, Jean, Fortin, Guy et Masson, Christian.
2015.
« Hybrid fine scale climatology and microphysics of in-cloud icing: From 32km reanalysis to 5 km mesoscale modeling ».
Atmospheric Research, vol. 154.
pp. 175-190.
Lamraoui, Mourad , Barakat, Mustapha , Thomas, Marc et El Badaoui, Mohamed .
2015.
« Chatter detection in milling machines by neural networks classification and feature selection ».
Journal of Vibration and Control, vol. 21, nº 7.
pp. 1251-1266.
Landry, René Jr. et Ilie, Iurie.
2015.
« Software-defined GNSS simulator : a step forward ».
Inside GNSS, vol. 10, nº 4.
pp. 54-60.
Langar, Rami, Secci, Stefano, Boutaba, Raouf et Pujolle, Guy.
2015.
« An operations research game approach for resource and power allocation in cooperative femtocell networks ».
IEEE Transactions on Mobile Computing, vol. 14, nº 4.
pp. 675-687.
Lapalme, James et Conklin, James.
2015.
« Combining process consultation and structural interventions ».
Systems Research and Behavioral Science, vol. 32.
pp. 298-311.
Lapointe, Mathieu et Barbeau, Benoit.
2015.
« Evaluation of activated starch as an alternative to polyacrylamide polymers for drinking water flocculation ».
Journal of Water Supply: Research and Technology - AQUA, vol. 64, nº 3.
pp. 333-343.
Lauziere, Selena, Mieville, Carole, Betschart, Martina, Aissaoui, Rachid et Nadeau, Sylvie.
2015.
« Plantarflexor weakness is a determinant of kinetic asymmetry during gait in post-stroke individuals walking with high levels of effort ».
Clinical Biomechanics, vol. 30, nº 9.
pp. 946-952.
Laville, Frédéric, Voix, Jérémie, Doutres, Olivier, Le Cocq, Cécile, Bouthot, Olivier, Sgard, Franck, Nélisse, Hugues, Marcotte, Pierre et Boutin, Jérôme.
2015.
« ÉTS-IRSST Common Infrastructure for Research in Acoustics - ICAR ».
Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 2.
pp. 22-23.
Lavoie, Jacques, Marchand, Geneviève, Cloutier, Yves, Hallé, Stéphane, Nadeau, Sylvie, Duchaine, Caroline et Pichette, Gilbert.
2015.
« Evaluation of bioaerosol exposures during hospital bronchoscopy examinations ».
Environmental Science: Processes & Impacts, vol. 17, nº 2.
pp. 288-299.
Le Dû, M., Dutil, Y., Rousse, D. R., Paradis, P. L. et Groulx, D..
2015.
« Economic and energy analysis of domestic ground source heat pump systems in four Canadian cities ».
Journal of Renewable and Sustainable Energy, vol. 7, nº 5.
053113.
Leclaire, P., Umnova, O., Dupont, T. et Panneton, R..
2015.
« Acoustical properties of air-saturated porous material with periodically distributed dead-end pores ».
Journal of the Acoustical Society of America, vol. 137, nº 4.
pp. 1772-1782.
Leclère, Jérôme, Botteron, Cyril, Landry, René Jr. et Farine, Pierre-André.
2015.
« FFT splitting for improved FPGA-based acquisition of GNSS signals ».
International Journal of Navigation and Observation, vol. 2015.
Lefèvre, Florent, Juneau, Philippe et Izquierdo, Ricardo.
2015.
« Integration of fluorescence sensors using organic optoelectronic components for microfluidic platform ».
Sensors and Actuators, B: Chemical, vol. 221.
pp. 1314-1320.
Leger St-Jean, Benjamin, Ménard, Jérémie, Hinse, Stéphanie, Petit, Yvan, Rouleau, Dominique M. et Beauchamp, Marc.
2015.
« Braided tape suture provides superior bone pull-through strength than wire suture in greater tuberosity of the humerus ».
Journal of Orthopaedics, vol. 12, nº Supplement 1.
S14-S17.
Lejeune, Michel.
2015.
« L’apport de la sociologie de la technologie à la professionnalisation de l’ingénieur ».
Phronesis, vol. 4, nº 2.
pp. 34-41.
Lemaire, R., Bruhier, C., Menage, D., Therssen, E. et Seers, P..
2015.
« Study of the high heating rate devolatilization of a pulverized bituminous coal under oxygen-containing atmospheres ».
Journal of Analytical and Applied Pyrolysis, vol. 114, nº July 2015.
pp. 22-31.
Lemaire, Romain, Lapalme, Denis et Seers, Patrice.
2015.
« Analysis of the sooting propensity of C-4 and C-5 oxygenates: Comparison of sooting indexes issued from laser-based experiments and group additivity approaches ».
Combustion and Flame, vol. 162, nº 9.
pp. 3140-3155.
Lemaire, Romain et Mobtil, Mohammed.
2015.
« Modeling laser-induced incandescence of soot: a new approach based on the use of inverse techniques ».
Applied Physics B: Lasers and Optics, vol. 119, nº 4.
pp. 577-606.
Lerouge, Sophie, Barrette, Jérémie, Ruiz, Juan-Carlos, Sbai, Marouan, Savoji, Houman, Saoudi, Bachir, Gauthier, Matthieu et Wertheimer, Michael R..
2015.
« Nitrogen-rich plasma polymer coatings for biomedical applications: stability, mechanical properties and adhesion under dry and wet conditions ».
Plasma Processes and Polymers, vol. 12, nº 9.
pp. 882-895.
Lessard, Hugues, Lebrun, Gilbert, Benkaddour, Abdelhaq et Pham, Xuan-Tan.
2015.
« Influence of process parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone laminate ».
Composites Part A: Applied Science and Manufacturing, vol. 70.
pp. 59-68.
Lessard, Simon, Kauffmann, Claude, Pfister, Marcus, Cloutier, Guy, Thérasse, Éric, de Guise, Jacques A. et Soulez, Gilles.
2015.
« Automatic detection of selective arterial devices for advanced visualization during abdominal aortic aneurysm endovascular repair ».
Medical Engineering and Physics, vol. 37, nº 10.
pp. 979-986.
Li, L., Hamel, N., Baker, K., McGuffin, Michael John, Couillard, M., Gologan, A., Marcus, V. A., Chodirker, B., Chudley, A., Stefanovici, C., Durandy, A., Hegele, R. A., Feng, B. J., Goldgar, D. E., Zhu, J., Rosa, M. D., Gruber, S. B., Wimmer, K., Young, B., Chong, G., Tischkowitz, M. D. et Foulkes, W. D..
2015.
« A homozygous PMS2 founder mutation with an attenuated constitutional mismatch repair deficiency phenotype ».
Journal of Medical Genetics, vol. 52, nº 5.
pp. 348-352.
Lopez-Herrejon, Roberto E., Linsbauer, Lukas et Egyed, Alexander.
2015.
« A systematic mapping study of search-based software engineering for software product lines ».
Information and Software Technology, vol. 61.
pp. 33-51.
Lopez-Herrejon, Roberto E., Linsbauer, Lukas, Galindo, Jose A., Parejo, Jose A., Benavides, David, Segura, Sergio et Egyed, Alexander.
2015.
« An assessment of search-based techniques for reverse engineering feature models ».
Journal of Systems and Software, vol. 103.
pp. 353-369.
López-Martín, Cuauhtémoc et Abran, Alain.
2015.
« Neural networks for predicting the duration of new software projects ».
Journal of Systems and Software, vol. 101.
pp. 127-135.
Louafi, Habib, Coulombe, Stéphane et Chandra, Umesh.
2015.
« Robust QoE-aware prediction-based dynamic content adaptation framework applied to slides documents in mobile Web conferencing ».
Multimedia Tools and Applications, vol. 74, nº 18.
pp. 7883-7920.
Louhichi, Borhen, Abenhaim, Gad N. et Tahan, Antoine S..
2015.
« CAD/CAE integration: updating the CAD model after a FEM analysis ».
International Journal of Advanced Manufacturing Technology, vol. 76, nº 1.
pp. 391-400.
Louhichi, Borhen, Tlija, Mehdi, Benamara, Abdelmajid et Tahan, Antoine.
2015.
« An algorithm for CAD tolerancing integration: Generation of assembly configurations according to dimensional and geometrical tolerances ».
Computer-Aided Design, vol. 62.
pp. 259-274.
Luka, George, Ahmadi, Ali, Najjaran, Homayoun, Alocilja, Evangelyn, Derosa, Maria, Wolthers, Kirsten, Malki, Ahmed, Aziz, Hassan, Althani, Asmaa et Hoorfar, Mina.
2015.
« Microfluidics integrated biosensors: A leading technology towards lab-on-A-chip and sensing applications ».
Sensors, vol. 15, nº 12.
pp. 30011-30031.
Maamri, Ilyes, Barka, Noureddine, El Ouafi, Abderrazak et Jahazi, Mohammad.
2015.
« A sensitivity study of 4340 steel hardness profile heat-treated by laser ».
International Journal of Emerging Technology and Advanced Engineering, vol. 5, nº 9.
pp. 7-13.
Malho, J. M., Ouellet-Plamondon, C., Ruggeberg, M., Laaksonen, P., Ikkala, O., Burgert, I. et Linder, M. B..
2015.
« Enhanced plastic deformations of nanofibrillated cellulose film by adsorbed moisture and protein-mediated interactions ».
Biomacromolecules, vol. 16, nº 1.
pp. 311-318.
Marefat, Vahid, Duhaime, François et Chapuis, Robert P..
2015.
« Pore pressure response to barometric pressure change in Champlain clay: Prediction of the clay elastic properties ».
Engineering Geology, vol. 198.
pp. 16-29.
Martin, Alexis et Voix, Jérémie.
2015.
« Identification des biosignaux pour un protecteur auditif ».
[Résumé d'une communication à une conférence]. Travail et Santé, vol. 31, nº 4.
p. 20.
Martins, J. G., Oliveira, L. S., Britto, A. S. et Sabourin, Robert.
2015.
« Forest species recognition based on dynamic classifier selection and dissimilarity feature vector representation ».
Machine Vision and Applications, vol. 26, nº 2-3.
pp. 279-293.
Mballa E, Landry et Bennis, Saad.
2015.
« Analyse de l'opportunité d'application des méthodes d'estimation des débits des rivières par courbe de tarage et capteur doppler immergé fixe ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 42, nº 5.
pp. 329-341.
Mebarki, Fouzia et David, Eric.
2015.
« Characterization of the dielectric endurance of reinforced recycled PET using electro-thermal aging test ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 22, nº 6.
pp. 3513-3520.
Medjdoub, Abdellah, David, Éric, Couderc, Hugues et Fréchette, Michel.
2015.
« Study of dielectric properties of HDPE-SIO2 nanocomposite ».
Annales de Chimie: Science des Matériaux, vol. 39, nº 1-2.
pp. 27-39.
Mehmanparast, Hedayeh, Mac-Thiong, Jean-Marc et Petit, Yvan.
2015.
« In vitro evaluation of pedicle screw loosening mechanism: a preliminary study on animal model ».
Scoliosis, vol. 10, nº Suppl 1.
O25.
Mehmanparast, Hedayeh, Petit, Yvan et Mac-Thiong, Jean-Marc.
2015.
« Comparison of pedicle screw loosening mechanisms and the effect on fixation strength ».
Journal of Biomechanical Engineering, vol. 137, nº 12.
Melanson, D. M., White, D. J., Samson, C., Bellefleur, G., Schetselaar, E. et Schmitt, D. R..
2015.
« Mode-converted volcanogenic massive sulphide ore lens reflections in vertical seismic profiles from Flin Flon, Manitoba, Canada ».
Geophysical Prospecting, vol. 63, nº 4.
pp. 849-860.
Mezghani, Neila, Gaudrault, Nathaly, Mitiche, Amar, Ayoubian, Leila, Ouakrim, Youssef, Hagemeister, Nicola et de Guise, Jacques A..
2015.
« Kinematic gait analysis of workers exposed to knee straining postures by Bayes decision rule ».
Artificial Intelligence Research, vol. 4, nº 2.
pp. 106-111.
Mezquita, Jeffrey, Mehrjerdi, Hasan, Lefebvre, Serge, Saad, Maarouf, Lagacé, Pierre Jean et Asber, Dalal.
2015.
« A secondary voltage regulation approach for Hydro-Québec in transmission level ».
Electric Power Systems Research, vol. 121.
pp. 183-191.
Mitiche, Amar, Mathlouthi, Yosra et Ben Ayed, Ismail.
2015.
« Monocular concurrent recovery of structure and motion scene flow ».
Frontiers in ICT, vol. 2.
Mkaouer, Wiem, Kessentini, Marouane, Shaout, Adnan, Koligheu, Patrice, Bechikh, Slim, Deb, Kalyanmoy et Ouni, Ali.
2015.
« Many-objective software remodularization using NSGA-III ».
ACM Transactions on Software Engineering and Methodology, vol. 24, nº 3.
Moevus, Antoine, Mignotte, Max, de Guise, Jacques et Meunier, Jean.
2015.
« A perceptual map for gait symmetry quantification and pathology detection ».
BioMedical Engineering OnLine, vol. 14.
Moghaddam, Fereydoun Farrahi, Moghaddam, Reza Farrahi et Cheriet, Mohamed.
2015.
« Carbon-aware distributed cloud: multi-level grouping genetic algorithm ».
Cluster Computing, vol. 18, nº 1.
pp. 477-491.
Mohamed, Hamdy M., Chaallal, Omar et Benmokrane, Brahim.
2015.
« Torsional moment capacity and failure mode mechanisms of concrete beams reinforced with carbon FRP bars and stirrups ».
Journal of Composites for Construction, vol. 19, nº 2.
Mohammed-Taifour, A., Schwaab, Q., Pioton, J. et Weiss, Julien.
2015.
« A new wind tunnel for the study of pressure-induced separating and reattaching flows ».
Aeronautical Journal, vol. 119, nº 1211.
pp. 91-108.
Mohammed-Taifour, Abdelouahab, Weiss, Julien, Sadeghi, Atabak, Vétel, Jerôme, Jondeau, Emmanuel et Comte-Bellot, Geneviève.
2015.
« A detailed procedure for measuring turbulent velocity fluctuations using constant-voltage anemometry ».
Experiments in Fluids, vol. 56, nº 9.
Mokhtabad Amrei, Mohsen, Verreman, Yves, Bridier, Florent, Thibault, Denis et Bocher, Philippe.
2015.
« Microstructure characterization of single and multipass 13Cr4Ni steel welded joints ».
Metallography, Microstructure, and Analysis, vol. 4, nº 3.
pp. 207-218.
Montoya-Torres, Jairo R., Gutierrez-Franco, Edgar et Blanco, Edgar E..
2015.
« Conceptual framework for measuring carbon footprint in supply chains ».
Production Planning and Control, vol. 26, nº 4.
pp. 265-279.
Montoya-Torres, Jairo R., López Franco, Julian, Nieto Isaza, Santiago, Felizzola Jiménez, Heriberto et Herazo-Padilla, Nilson.
2015.
« A literature review on the vehicle routing problem with multiple depots ».
Computers and Industrial Engineering, vol. 79.
pp. 115-129.
Mortazavi, Hashem, Mehrjerdi, Hasan, Saad, Maarouf, Lefebvre, Serge, Asber, Dalal et Lenoir, Laurent.
2015.
« A monitoring technique for reversed power flow detection with high PV penetration level ».
IEEE Transactions on Smart Grid, vol. 6, nº 5.
pp. 2221-2232.
Motamedi, M. Reza, Florant, David et Duchaine, Vincent.
2015.
« A wearable haptic device based on twisting wire actuators for Feedback of tactile pressure information ».
Journal of Robotics and Mechatronics, vol. 27, nº 4.
pp. 419-429.
Mousavi, S. Hassan et Kouki, Ammar B..
2015.
« High-SRF VHF/UHF lumped elements in LTCC ».
IEEE Microwave and Wireless Components Letters, vol. 25, nº 1.
pp. 25-27.
Muller, Yann-Aël, Aubrun, Sandrine et Masson, Christian.
2015.
« Determination of real-time predictors of the wind turbine wake meandering ».
Experiments in Fluids, vol. 56, nº 3.
Mullier, Guillaume et Chatelain, Jean-François.
2015.
« Influence of thermal damage on the mechanical strength of trimmed CFRP ».
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 9, nº 8.
pp. 1509-1516.
Murrieta-Mendoza, Alejandro et Botez, Ruxandra M..
2015.
« Methodology for vertical-navigation flight-trajectory cost calculation using a performance database ».
Journal of Aerospace Information Systems, vol. 12, nº 8.
pp. 519-532.
Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick, Lina, Jean-Marc et Voix, Jérémie.
2015.
« Individual monitoring of hearing status : Development and validation of advanced techniques to measure otoacoustic emissions in suboptimal test conditions ».
Applied Acoustics, vol. 89.
pp. 78-87.
Najjari, Morteza et Guilbault, Raynald.
2015.
« Formula derived from particle swarm optimization (PSO) for optimum design of cylindrical roller profile under EHL regime ».
Mechanism and Machine Theory, vol. 90.
pp. 162-174.
Nayebi, Fatih, Abran, Alain et Desharnais, Jean-Marc.
2015.
« Automated selection of a software effort estimation model based on accuracy and uncertainty ».
Artificial Intelligence Research, vol. 4, nº 2.
pp. 45-54.
Nejad, Hojatollah Rezaei, Samiei, Ehsan, Ahmadi, Ali et Hoorfar, Mina.
2015.
« Gravity-driven hydrodynamic particle separation in digital microfluidic systems ».
RSC Advances, vol. 5, nº 45.
pp. 35966-35975.
Nélisse, Hugues, Le Cocq, Cécile, Boutin, Jérôme, Laville, Frédéric et Voix, Jérémie.
2015.
« Systematic evaluation of the relationship between physical and psychoacoustical measurements of hearing protectors' attenuation ».
Journal of Occupational and Environmental Hygiene, vol. 12, nº 12.
pp. 829-844.
Nestor, P. G., Ohtani, T., Bouix, S., Hosokawa, T., Saito, Y., Newell, D. T. et Kubicki, M..
2015.
« Dissociating prefrontal circuitry in intelligence and memory: neuropsychological correlates of magnetic resonance and diffusion tensor imaging ».
Brain Imaging and Behavior, vol. 9, nº 4.
pp. 839-847.
Ngô, Anh Dung, Ho, Thu Nga et Sefrioui Manar, Khalid.
2015.
« Environmental effects on the static and fatigue behaviours of hemp fibre under tensile loading ».
[Article de conférence]. Applied Mechanics and Materials, vol. 798.
pp. 410-418.
Nguyen, K. K. et Cheriet, Mohamed.
2015.
« Environment-aware virtual slice provisioning in green cloud environment ».
IEEE Transactions on Services Computing, vol. 8, nº 3.
pp. 507-519.
Nguyen, Kim Khoa et Jaumard, Brigitte.
2015.
« Distributed schemes for routing table management in next generation routers ».
Journal of Network and Systems Management, vol. 23, nº 1.
pp. 41-57.
Nguyen, Sy Quy et Chatelain, Jean-Francois.
2015.
« Study of the milling process for thin components using a flexible setup configuration ».
[Article de conférence]. Applied Mechanics and Materials, vol. 704.
pp. 27-31.
Nguyen, Thi-Hong-Dang et Dao, Thien-My.
2015.
« Supply chain milk-run delivery optimization ».
Journal of Management and Engineering Integration, vol. 8, nº 1.
pp. 29-40.
Nijsure, Yogesh, Kaddoum, Georges et Leung, Henry.
2015.
« Cognitive chaotic UWB-MIMO radar based on nonparametric Bayesian technique ».
IEEE Transactions on Aerospace and Electronic Systems, vol. 51, nº 3.
pp. 2360-2378.
Niknam, Seyed Ali et Songmene, Victor.
2015.
« Milling burr formation, modeling and control: A review ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 229, nº 6.
pp. 893-909.
Njeh, Ines, Sallemi, Lamia, Ben Ayed, Ismail, Chtourou, Khalil, Lehericy, Stephane, Galanaud, Damien et Ben Hamida, Ahmed.
2015.
« 3D multimodal MRI brain glioma tumor and edema segmentation: a graph cut distribution matching approach ».
Computerized Medical Imaging and Graphics, vol. 40.
pp. 108-119.
Ochoa Luna, Cristóbal, Rahman, Mohammad Habibur, Saad, Maarouf, Archambault, Philippe S. et Ferrer, Steven Bruce.
2015.
« Admittance-based Upper Limb Robotic Active and Active-assistive Movements ».
International Journal of Advanced Robotic Systems, vol. 12, nº 9.
Ohl, Xavier, Hagemeister, Nicola, Zhang, Cheng, Billuart, Fabien, Gagey, Olivier, Bureau, Nathalie J. et Skalli, Wafa.
2015.
« 3D scapular orientation on healthy and pathologic subjects using stereoradiographs during arm elevation ».
Journal of Shoulder and Elbow Surgery, vol. 24, nº 11.
pp. 1827-1833.
Ohl, Xavier, Lagacé, Pierre-Yves, Billuart, Fabien, Gagey, Olivier, Skalli, Wafa et Hagemeister, Nicola.
2015.
« Robustness and reproducibility of a glenoid-centered scapular coordinate system derived from low-dose stereoradiography analysis ».
Journal of Applied Biomechanics, vol. 31, nº 1.
pp. 56-61.
Ohtani, T., Bouix, S., Lyall, A. E., Hosokawa, T., Saito, Y., Melonakos, E., Westin, C. F., Seidman, L. J., Goldstein, J., Mesholam-Gately, R., Petryshen, T., Wojcik, J. et Kubicki, M..
2015.
« Abnormal white matter connections between medial frontal regions predict symptoms in patients with first episode schizophrenia ».
Cortex, vol. 71.
pp. 264-276.
Olson, L., Samson, C. et McKinnon, S. D..
2015.
« 3-D laser imaging of drill core for fracture detection and Rock Quality Designation ».
International Journal of Rock Mechanics and Mining Sciences, vol. 73.
pp. 156-164.
O’Reilly, C., Godbout, J., Carrier, J. et Lina, Jean-Marc.
2015.
« Combining time-frequency and spatial information for the detection of sleep spindles ».
Frontiers in Human Neuroscience, vol. 9.
Ouammi, Ahmed, Dagdougui, Hanane, Dessaint, Louis et Sacile, Roberto.
2015.
« Coordinated model predictive-based power flows control in a cooperative network of smart microgrids ».
IEEE Transactions on Smart Grid, vol. 6, nº 5.
pp. 2233-2244.
Ouaret, Samir, Kenné, Jean-Pierre, Gharbi, Ali et Polotski, Vladimir.
2015.
« Joint production and replacement strategy for a quality deteriorating failure-prone manufacturing system ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 1198-1203.
Ouellet-Plamondon, Claudiane, Aranda, Pilar, Favier, Aurelie, Habert, Guillaume, van Damme, Henri et Ruiz-Hitzky, Eduardo.
2015.
« The Maya blue nanostructured material concept applied to colouring geopolymers ».
RSC Advances, vol. 5, nº 120.
pp. 98834-98841.
Ouhimmou, Mustapha, Haddad, Samir et Boukherroub, Tasseda.
2015.
« Decision support system for selection of harvest areas and wood allocation to mills ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 628-633.
Ould-Bachir, T., Fortin Blanchette, Handy et Al Haddad, Kamal.
2015.
« A network tearing technique for FPGA-based real-time simulation of power converters ».
IEEE Transactions on Industrial Electronics, vol. 62, nº 6.
pp. 3409-3418.
Ouni, Ali, Kessentini, Marouane, Bechikh, Slim et Sahraoui, Houari.
2015.
« Prioritizing code-smells correction tasks using chemical reaction optimization ».
Software Quality Journal, vol. 23, nº 2.
pp. 323-361.
Ouni, Ali, Kessentini, Marouane, Sahraoui, Houari, Inoue, Katsuro et Hamdi, Mohamed Salah.
2015.
« Improving multi-objective code-smells correction using development history ».
Journal of Systems and Software, vol. 105.
pp. 18-39.
Ounifi, Hibat-Allah, Ouhimmou, Mustapha, Paquet, Marc et Montecinos, Julio.
2015.
« Datacenter location for Internet services in the province of Quebec ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 2266-2272.
Pambrun, Jean-François et Noumeir, Rita.
2015.
« Computed tomography image compressibility and limitations of compression ratio-based guidelines ».
Journal of Digital Imaging, vol. 28, nº 6.
pp. 636-645.
Panenka, W. J., Lange, R. T., Bouix, S., Shewchuk, J. R., Heran, M. K. S., Brubacher, J. R., Eckbo, R., Shenton, M. E. et Iverson, G. L..
2015.
« Neuropsychological outcome and diffusion tensor imaging in complicated versus uncomplicated mild traumatic brain injury ».
PLoS ONE, vol. 10, nº 4.
Paquin, Mathieu, Thibault, Denis, Bocher, Philippe, Lévesque, Jean-Benoît, Verreman, Yves et Shinozaki, Kenji.
2015.
« Assessment of cold cracking tests for low transformation temperature martensitic stainless steel multipass welds ».
Welding in the World, vol. 59, nº 4.
pp. 521-532.
Paradis, Pierre-Luc, Rousse, Daniel R., Hallé, Stéphane, Lamarche, Louis et Quesada, Guillermo.
2015.
« Thermal modeling of evacuated tube solar air collectors ».
Solar Energy, vol. 115.
pp. 708-721.
Pascual, Gustavo G., Lopez-Herrejon, Roberto E., Pinto, Monica, Fuentes, Lidia et Egyed, Alexander.
2015.
« Applying multiobjective evolutionary algorithms to dynamic software product lines for reconfiguring mobile applications ».
Journal of Systems and Software, vol. 103.
pp. 392-411.
Pasternak, O., Westin, C. F., Dahlben, B., Bouix, S. et Kubicki, M..
2015.
« The extent of diffusion MRI markers of neuroinflammation and white matter deterioration in chronic schizophrenia ».
Schizophrenia Research, vol. 161, nº 1.
pp. 113-118.
Patron, Roberto S. Félix, Berrou, Yolène et Botez, Ruxandra M..
2015.
« New methods of optimization of the flight profiles for performance database-modeled aircraft ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 229, nº 10.
pp. 1853-1867.
Patron, Roberto Salvador Félix et Botez, Ruxandra Mihaela.
2015.
« Flight trajectory optimization through genetic algorithms for lateral and vertical integrated navigation ».
Journal of Aerospace Information Systems, vol. 12, nº 8.
pp. 533-544.
Paucar, Luis Garcia, Laporte, Claude Y., Arteaga, Jaylli et Bruggmann, Marco.
2015.
« Implementation and certification of ISO/IEC 29110 in an IT startup in Peru ».
Software Quality Professional, vol. 17, nº 2.
pp. 16-29.
Pedersoli, Marco, Timofte, Radu, Tuytelaars, Tinne et Van Gool, Luc.
2015.
« An elastic deformation field model for object detection and tracking ».
International Journal of Computer Vision, vol. 111, nº 2.
pp. 137-152.
Pedersoli, Marco, Vedaldi, Andrea, Gonzàlez, Jordi et Roca, Xavier.
2015.
« A coarse-to-fine approach for fast deformable object detection ».
Pattern Recognition, vol. 48, nº 5.
pp. 1844-1853.
Pepin, N., Bradley, R. S., Diaz, H. F., Baraër, Michel, Caceres, E. B., Forsythe, N., Fowler, H., Greenwood, G., Hashmi, M. Z., Liu, X. D., Miller, J. R., Ning, L., Ohmura, A., Palazzi, E., Rangwala, I., Schöner, W., Severskiy, I., Shahgedanova, M., Wang, M. B., Williamson, S. N. et Yang, D. Q..
2015.
« Elevation-dependent warming in mountain regions of the world ».
Nature Climate Change, vol. 5, nº 5.
pp. 424-430.
Pérez-Sánchez, H. A., Benítez-Rendón, E. U., Castillo-Toledo, B., Loukianov, A. G., Luque-Vega, L. F. et Saad, M..
2015.
« Cockpit design for first person view flight for a remotely operated quadrotor helicopter ».
Computacion y Sistemas, vol. 19, nº 3.
pp. 501-511.
Perraton, Daniel, Touhara, Radouen, Di Benedetto, Hervé et Carter, Alan.
2015.
« Ability of the classical fatigue criterion to be associated with macro-crack growth ».
Materials and Structures = Matériaux et Constructions, vol. 48, nº 8.
pp. 2383-2395.
Petitjean, Caroline, Zuluaga, Maria A., Bai, Wenjia, Dacher, Jean-Nicolas, Grosgeorge, Damien, Caudron, Jérôme, Ruan, Su, Ben Ayed, Ismail, Cardoso, M. Jorge, Chen, Hsiang-Chou, Jimenez-Carretero, Daniel, Ledesma-Carbayo, Maria J., Davatzikos, Christos, Doshi, Jimit, Erus, Guray, Maier, Oskar M. O., Nambakhsh, Cyrus M. S., Ou, Yangming, Ourselin, Sébastien, Peng, Chun-Wei, Peters, Nicholas S., Peters, Terry M., Rajchl, Martin, Rueckert, Daniel, Santos, Andres, Shi, Wenzhe, Wang, Ching-Wei, Wang, Haiyan et Yuan, Jing.
2015.
« Right ventricle segmentation from cardiac MRI: a collation study ».
Medical Image Analysis, vol. 19, nº 1.
pp. 187-202.
Phan, P., Ouellet, J., Mezghani, N., de Guise, Jacques A. et Labelle, H..
2015.
« A rule-based algorithm can output valid surgical strategies in the treatment of AIS ».
European Spine Journal, vol. 24, nº 7.
pp. 1370-1381.
Pinquié, Romain, Rivest, Louis, Segonds, Frédéric et Véron, Philippe.
2015.
« An illustrated glossary of ambiguous PLM terms used in discrete manufacturing ».
International Journal of Product Lifecycle Management, vol. 8, nº 2.
pp. 142-171.
Poirier, E., Staub-French, S. et Forgues, Daniel.
2015.
« Embedded contexts of innovation: BIM adoption and implementation for a specialty contracting SME ».
Construction Innovation, vol. 15, nº 1.
pp. 42-65.
Poirier, Erik A., Staub-French, Sheryl et Forgues, Daniel.
2015.
« Assessing the performance of the building information modeling (BIM) implementation process within a small specialty contracting enterprise ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 42, nº 10.
pp. 766-778.
Poirier, Erik A., Staub-French, Sheryl et Forgues, Daniel.
2015.
« Measuring the impact of BIM on labor productivity in a small specialty contracting enterprise through action-research ».
Automation in Construction, vol. 58.
pp. 74-84.
Polotski, Vladimir, Kenné, Jean-Pierre et Gharbi, Ali.
2015.
« Failure-prone manufacturing systems with setups: feasibility and optimality under various hypotheses about perturbations and setup interplay ».
International Journal of Mathematics in Operational Research, vol. 7, nº 6.
pp. 681-705.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2015.
« Optimal production scheduling for hybrid manufacturing-remanufacturing systems with setups ».
Journal of Manufacturing Systems, vol. 37.
pp. 703-714.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2015.
« Production and setup policy optimization for hybrid manufacturing-remanufacturing systems ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 2021-2026.
Prokoshkin, S., Brailovski, V., Inaekyan, K., Demers, V. et Kreitcberg, A..
2015.
« Nanostructured Ti–Ni shape memory alloys produced by thermomechanical processing ».
Shape Memory and Superelasticity, vol. 1, nº 2.
pp. 191-203.
Proulx, Sébastien.
2015.
« Le design à l’épreuve du concept de pratique ».
Sciences du Design, vol. 2, nº 2.
pp. 20-30.
Provençal, Xavier et Vuillon, Laurent.
2015.
« Discrete segments of ℤ3 constructed by synchronization of words ».
Discrete Applied Mathematics, vol. 183.
pp. 102-117.
Punithakumar, Kumaradevan, Noga, Michelle, Ben Ayed, Ismail et Boulanger, Pierre.
2015.
« Right ventricular segmentation in cardiac MRI with moving mesh correspondences ».
Computerized Medical Imaging and Graphics, vol. 43.
pp. 15-25.
Qadi, A., Cloutis, E., Samson, C., Whyte, L., Ellery, A., Bell, J. F., Berard, G., Boivin, A., Haddad, E., Lavoie, J., Jamroz, W., Kruzelecky, R., Mack, A., Mann, P., Olsen, K., Perrot, M., Popa, D., Rhind, T., Sharma, R., Stromberg, J., Strong, K., Tremblay, A., Wilhelm, R., Wing, B. et Wong, B..
2015.
« Mars methane analogue mission: Mission simulation and rover operations at Jeffrey Mine and Norbestos Mine Quebec, Canada ».
Advances in Space Research, vol. 55, nº 10.
pp. 2414-2426.
Quesada, Guillermo, Guillon, Laura, Rousse, Daniel R., Mehrtash, Mostafa, Dutil, Yvan et Paradis, Pierre-Luc.
2015.
« Tracking strategy for photovoltaic solar systems in high latitudes ».
Energy Conversion and Management, vol. 103.
pp. 147-156.
Rabah, Sleiman, El Barachi, May, Kara, Nadjia, Dssouli, Rachida et Paquet, Joey.
2015.
« A service oriented broker-based approach for dynamic resource discovery in virtual networks ».
Journal of Cloud Computing, vol. 4, nº 3.
Rahman, M. H., Rahman, M. J., Cristobal, O. L., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, P. S..
2015.
« Development of a whole arm wearable robotic exoskeleton for rehabilitation and to assist upper limb movements ».
Robotica, vol. 33, nº 1.
pp. 19-39.
Rahman, Mohammad H., Ochoa-Luna, Cristobal et Saad, Maarouf.
2015.
« EMG based control of a robotic exoskeleton for shoulder and elbow motion assist ».
Journal of Automation and Control Engineering, vol. 3, nº 4.
pp. 270-276.
Ralchenko, M., Svilans, M., Samson, C. et Roper, M..
2015.
« Finite-difference time-domain modelling of through-the-Earth radio signal propagation ».
Computers and Geosciences, vol. 85, nº Part. A.
pp. 184-195.
Ramirez Cardona, Diego Alejandro, Pouget, Simon, Di Benedetto, Herve et Olard, François.
2015.
« Viscoelastic behaviour characterization of a gap-graded asphalt mixture with SBS polymer modified bitumen ».
Materials Research, vol. 18, nº 2.
pp. 373-381.
Raymond, Jasmin, Lamarche, Louis et Malo, Michel.
2015.
« Field demonstration of a first thermal response test with a low power source ».
Applied Energy, vol. 147.
pp. 30-39.
Razavipour, Hadi, Yang, Wayne, Guermoune, Abdeladim, Hilke, Michael, Cooke, David G., Al-Naib, Ibraheem, Dignam, Marc M., Blanchard, François, Hafez, Hassan A., Chai, Xin, Ferachou, Denis, Ozaki, Tsuneyuki, Lévesque, Pierre L. et Martel, Richard.
2015.
« High-field response of gated graphene at terahertz frequencies ».
Physical Review B, vol. 92, nº 24.
Ren, Qun, Baron, Luc, Balazinski, Marek, Botez, Ruxandra et Bigras, Pascal.
2015.
« Tool wear assessment based on type-2 fuzzy uncertainty estimation on acoustic emission ».
Applied Soft Computing, vol. 31.
pp. 14-24.
Rezkallah, Miloud, Hamadi, Abdelhamid, Chandra, Ambrish et Singh, Bhim.
2015.
« Real-time HIL implementation of sliding mode control for standalone system based on PV array without using dumpload ».
IEEE Transactions on Sustainable Energy, vol. 6, nº 4.
pp. 1389-1398.
Režnáková, M., Tencer, L. et Cheriet, Mohamed.
2015.
« SO-ARTIST: Self-organized ART-2A inspired clustering for online Takagi-Sugeno fuzzy models ».
Applied Soft Computing, vol. 31.
pp. 132-152.
Rhéaume, L. et Gardoni, Mickaël.
2015.
« The challenges facing corporate universities in dealing with open innovation ».
Journal of Workplace Learning, vol. 27, nº 4.
pp. 315-328.
Riboust, Philippe et Brissette, François.
2015.
« Climate Change Impacts and Uncertainties on Spring Flooding of Lake Champlain and the Richelieu River ».
Journal of the American Water Resources Association, vol. 51, nº 3.
pp. 776-793.
Ridoutt, Bradley, Fantke, Peter, Pfister, Stephan, Bare, Jane, Boulay, Anne-Marie, Cherubini, Francesco, Frischknecht, Rolf, Hauschild, Michael, Hellweg, Stefanie, Henderson, Andrew, Jolliet, Olivier, Levasseur, Annie, Margni, Manuele, McKone, Thomas, Michelsen, Ottar, Milà I Canals, Llorenç, Page, Girija, Pant, Rana, Raugei, Marco, Sala, Serenella, Saouter, Erwan, Verones, Francesca et Wiedmann, Thomas.
2015.
« Making sense of the minefield of footprint indicators ».
Environmental Science and Technology, vol. 49, nº 5.
pp. 2601-2603.
Robati, Masoud, Carter, Alan et Perraton, Daniel.
2015.
« Evaluation of a modification of current microsurfacing mix design procedures ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 42, nº 5.
pp. 319-328.
Robati, Masoud, Carter, Alan et Perraton, Daniel.
2015.
« New conceptual model for filler stiffening effect on asphalt mastic of microsurfacing ».
Journal of Materials in Civil Engineering, vol. 27, nº 11.
Robe, Hugo, Zedan, Yasser, Chen, Jianqiang, Monajati, Hossein, Feulvarch, Eric et Bocher, Philippe.
2015.
« Microstructural and mechanical characterization of a dissimilar friction stir welded butt joint made of AA2024-T3 and AA2198-T3 ».
Materials Characterization, vol. 110.
pp. 242-251.
Rojo, C., Vancassel, X., Mirabel, P., Ponche, J. L. et Garnier, François.
2015.
« Impact of alternative jet fuels on aircraft-induced aerosols ».
Fuel, vol. 144.
pp. 335-341.
Rosinvil, T., Lafortune, M., Sekerovic, Z., Bouchard, M., Dubé, J., Latulipe-Loiselle, A., Martin, N., Lina, Jean-Marc et Carrier, J..
2015.
« Age-related changes in sleep spindles characteristics during daytime recovery following a 25-hour sleep deprivation ».
Frontiers in Human Neuroscience, vol. 9.
Roth, S.N., Lacombe, A., Léger, P. et Soulaimani, A..
2015.
« Coupled hydromechanical cracking of concrete arch dams considering drainage efficiency ».
[Article de conférence]. Dam Engineering, vol. 25, nº 4.
pp. 143-155.
Roth, Simon-Nicolas, Léger, Pierre et Soulaïmani, Azzeddine.
2015.
« A combined XFEM-damage mechanics approach for concrete crack propagation ».
Computer Methods in Applied Mechanics and Engineering, vol. 283.
pp. 923-955.
Rousseau, Christiane et Roy-Fortin, Guillaume.
2015.
« Géométrie intégrale ».
Accromath, vol. 10.2.
pp. 14-19.
Rousseau, Clement, Comlan Fannou, Jean-Louis, Lamarche, Louis, Ouzzane, Mohamed et Kajl, Stanislaw.
2015.
« Modeling and experimental validation of a transient direct expansion geothermal heat exchanger ».
Geothermics, vol. 57.
pp. 95-103.
Roy-Fortin, G..
2015.
« Nodal sets and growth exponents of Laplace eigenfunctions on surfaces ».
Analysis and PDE, vol. 8, nº 1.
pp. 223-255.
Rúas-Araújo, J., Punín Larrea, M. I., Gómez Alvarado, H., Cuesta-Morales, P. et Ratté, S..
2015.
« Neuroscience applied to perception analysis: Heart and emotion when listening to Ecuador’s national anthem ».
Revista Latina de Comunicacion Social, vol. 70.
pp. 401-422.
Saber, Hamed H., Maref, Wahid, Gnanamurugan, Ganapathy et Nicholls, Mike.
2015.
« Energy retrofit using vacuum insulation panels: An alternative solution for enhancing the thermal performance of wood-frame walls ».
Journal of Building Physics, vol. 39, nº 1.
pp. 35-68.
Saidi, M. N., Songmene, Victor, Kouam, J. et Bahloul, A..
2015.
« Experimental investigation on fine particle emission during granite polishing process ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 9.
pp. 2109-2121.
Sanjosé, Marlène, Daroukh, Majd, De Laborderie, Jérôme, Moreau, Stéphane et Mann, Adrien.
2015.
« Tonal noise prediction and validation on the ANCF rotor-stator configuration ».
Noise Control Engineering Journal, vol. 63, nº 6.
pp. 552-562.
Sarafan, S., Wanjara, P., Champliaud, Henri et Thibault, D..
2015.
« Characteristics of an autogenous single pass electron beam weld in thick gage CA6NM steel ».
International Journal of Advanced Manufacturing Technology, vol. 78, nº 9.
pp. 1523-1535.
Savaria, V., Monajati, H., Bridier, F. et Bocher, Philippe.
2015.
« Measurement and correction of residual stress gradients in aeronautical gears after various induction surface hardening treatments ».
Journal of Materials Processing Technology, vol. 220.
pp. 113-123.
Savoji, Houman, Lerouge, Sophie, Ajji, Abdellah et Wertheimer, Michael R..
2015.
« Plasma-etching for controlled modification of structural and mechanical properties of electrospun PET scaffolds ».
Plasma Processes and Polymers, vol. 12, nº 4.
pp. 314-327.
Sboui, Lokman, Ghazzai, Hakim, Rezki, Zouheir et Alouini, Mohamed-Slim.
2015.
« Achievable rate of a cognitive MIMO multiple access channel with multi-secondary users ».
IEEE Communications Letters, vol. 19, nº 3.
pp. 403-406.
Sboui, Lokman, Ghazzai, Hakim, Rezki, Zouheir et Alouini, Mohamed-Slim.
2015.
« Achievable rate of spectrum sharing cognitive radio multiple-antenna channels ».
IEEE Transactions on Wireless Communications, vol. 14, nº 9.
pp. 4847-4856.
Sboui, Lokman, Rezki, Zouheir et Alouini, Mohamed-Slim.
2015.
« Energy-efficient power allocation for underlay cognitive radio systems ».
IEEE Transactions on Cognitive Communications and Networking, vol. 1, nº 3.
pp. 273-283.
Seers, P., Nachin, G. et Glaus, M..
2015.
« Development of two driving cycles for utility vehicles ».
Transportation Research Part D: Transport and Environment, vol. 41.
pp. 377-385.
Sellami, Asma, Hakim, Hela, Abran, Alain et Ben-Abdallah, Hanêne.
2015.
« A measurement method for sizing the structure of UML sequence diagrams ».
Information and Software Technology, vol. 59.
pp. 222-232.
Semenou, Thomas, Rousse, Daniel R., Le Lostec, Brice, Nouanegue, Hervé F. et Paradis, Pierre-Luc.
2015.
« Mathematical modeling of dual intake transparent transpired solar collector ».
Mathematical Problems in Engineering, vol. 2015.
Serra, Roger, Garibaldi, Luigi, Maia, Nuno M. et Thomas, Marc.
2015.
« Experimental Shock and Vibration Analysis ».
Shock and Vibration, vol. 2015.
Shameli-Sendi, Alireza, Pourzandi, Makan, Fekih-Ahmed, Mohamed et Cheriet, Mohamed.
2015.
« Taxonomy of Distributed Denial of Service mitigation approaches for cloud computing ».
Journal of Network and Computer Applications, vol. 58.
pp. 165-179.
Sharif, Helia, Ralchenko, Maxim, Samson, Claire et Ellery, Alex.
2015.
« Autonomous rock classification using Bayesian image analysis for Rover-based planetary exploration ».
Computers and Geosciences, vol. 83.
pp. 153-167.
Sharifzadeh, Mohammad, Vahedi, Hani, Sheikholeslami, Abdolreza, Labbe, Philippe-Alexandre et Al-Haddad, Kamal.
2015.
« Hybrid SHM-SHE modulation technique for a four-leg NPC inverter with DC capacitor self-voltage balancing ».
IEEE Transactions on Industrial Electronics, vol. 62, nº 8.
pp. 4890-4899.
Sharma, Shailendra Kumar, Singh, Bhim, Chandra, Ambrish et Al-Haddad, Kamal.
2015.
« Single-phase power generation employing VFC for stand-alone three-phase doubly wound asynchronous generator ».
IEEE Transactions on Industry Applications, vol. 51, nº 6.
pp. 4785-4796.
Shateri, Mohammadhadi, Ghorbani, Shohreh, Hemmati-Sarapardeh, Abdolhossein et Mohammadi, Amir H..
2015.
« Application of Wilcoxon generalized radial basis function network for prediction of natural gas compressibility factor ».
Journal of the Taiwan Institute of Chemical Engineers, vol. 50.
pp. 131-141.
Sher, Hadeed Ahmed, Murtaza, Ali Faisal, Noman, Abdullah, Addoweesh, Khaled E., Al-Haddad, Kamal et Chiaberge, Marcello.
2015.
« A new sensorless hybrid MPPT algorithm based on fractional short-circuit current measurement and P&O MPPT ».
IEEE Transactions on Sustainable Energy, vol. 6, nº 4.
pp. 1426-1434.
Sheremetyev, V. A., Prokoshkin, S. D., Brailovski, V., Dubinskiy, S. M., Korotitskiy, A. V., Filonov, M. R. et Petrzhik, M. I..
2015.
« Investigation of the structure stability and superelastic behavior of thermomechanically treated Ti-Nb-Zr and Ti-Nb-Ta shape-memory alloys ».
Physics of Metals and Metallography, vol. 116, nº 4.
pp. 413-422.
Sheremetyev, V., Prokoshkin, S., Brailovski, V., Dubinskiy, S., Filonov, M. et Petrzhik, M..
2015.
« Long-term stability of superelastic behavior of nanosubgrained Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys ».
[Article de conférence]. Materials Today: Proceedings, vol. 2, nº suppl. 1.
S26-S31.
Shoari, Niloofar, Dubé, Jean-Sébastien et Chenouri, Shoja'eddin.
2015.
« Estimating the mean and standard deviation of environmental data with below detection limit observations: Considering highly skewed data and model misspecification ».
Chemosphere, vol. 138.
pp. 599-608.
Singh, B., Bist, V., Chandra, Ambrish et Al Haddad, Kamal.
2015.
« Power factor correction in bridgeless-Luo converter-fed BLDC motor drive ».
IEEE Transactions on Industry Applications, vol. 51, nº 2.
pp. 1179-1188.
Singh, Shikha, Singh, Bhim, Bhuvaneswari, G., Bist, Vashist, Chandra, Ambrish et Al-Haddad, Kamal.
2015.
« Improved-power-quality bridgeless-converter-based multiple-output SMPS ».
IEEE Transactions on Industry Applications, vol. 51, nº 1.
pp. 721-732.
Sins, Lauranne, Tétreault, Patrice, Hagemeister, Nicola et Nuño, Natalia.
2015.
« Adaptation of the AnyBody Musculoskeletal Shoulder Model to the Nonconforming Total Shoulder Arthroplasty Context ».
Journal of Biomechanical Engineering, vol. 137, nº 10.
Slamani, Mohamed, Chatelain, Jean-François et Hamedanianpour, Hossein.
2015.
« Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP ».
International Journal of Material Forming, vol. 8, nº 2.
pp. 305-316.
Slamani, Mohamed, Gauthier, Sébastien et Chatelain, Jean-François.
2015.
« A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs ».
Measurement: Journal of the International Measurement Confederation, vol. 59.
pp. 268-283.
Slamani, Mohamed, Joubair, Ahmed et Bonev, Ilian A..
2015.
« A comparative evaluation of three industrial robots using three reference measuring techniques ».
Industrial Robot, vol. 42, nº 6.
pp. 572-585.
Smith, Melissa A., Gowers, Robert P., Shih, Andy et Akinwande, Akintunde Ibitayo.
2015.
« High-voltage organic thin-film transistors on flexible and curved surfaces ».
IEEE Transactions on Electron Devices, vol. 62, nº 12.
pp. 4213-4219.
Soltani, Mohammad Mostafa, Motamedi, Ali et Hammad, Amin.
2015.
« Enhancing Cluster-based RFID Tag Localization using artificial neural networks and virtual reference tags ».
Automation in Construction, vol. 54.
pp. 93-105.
Sonntag, Michel, Gitzhofer, François et Lejeune, Michel.
2015.
« La place de la recherche en sciences humaines, sociales et économiques dans les écoles d’ingénieurs : Bilan et perspectives ».
Phronesis, vol. 4, nº 2.
pp. 1-4.
Stamm, J. M., Koerte, I. K., Muehlmann, M., Pasternak, O., Bourlas, A. P., Baugh, C. M., Giwerc, M. Y., Zhu, A., Coleman, M. J., Bouix, S., Fritts, N. G., Martin, B. M., Chaisson, C., McClean, M. D., Lin, A. P., Cantu, R. C., Tripodis, Y., Stern, R. A. et Shenton, M. E..
2015.
« Age at first exposure to football is associated with altered corpus callosum white matter microstructure in former professional football players ».
Journal of Neurotrauma, vol. 32, nº 22.
pp. 1768-1776.
Stiharu, Ion, Alazzam, Anas, Nerguizian, Vahé et Roman, Dacian.
2015.
« Single living cell manipulation and identification using microsystems technologies ».
Microsystems & Nanoengineering, vol. 1.
Stinville, J. C., Bridier, F., Ponsen, D., Wanjara, P. et Bocher, Philippe.
2015.
« High and low cycle fatigue behavior of linear friction welded Ti-6Al-4V ».
International Journal of Fatigue, vol. 70.
pp. 278-288.
Stinville, J. C., Vanderesse, N., Bridier, F., Bocher, P. et Pollock, T. M..
2015.
« High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy ».
Acta Materialia, vol. 98.
pp. 29-42.
St-Onge, David, Gosselin, Clément et Reeves, Nicolas.
2015.
« Dynamic modelling and control of a cubic flying blimp using external motion capture ».
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol. 229, nº 10.
pp. 970-982.
Strano, Matteo, Marra, Alessandro, Mussi, Valerio, Goletti, Massimo et Bocher, Philippe.
2015.
« Endurance of damping properties of foam-filled tubes ».
Materials, vol. 8, nº 7.
pp. 4061-4079.
Subedi, Tara Nath, Nguyen, Kim Khoa et Cheriet, Mohamed.
2015.
« OpenFlow-based in-network Layer-2 adaptive multipath aggregation in data centers ».
Computer Communications, vol. 61.
pp. 58-69.
Sun, Songlin, Kadoch, Michel, Gong, Liang et Rong, Bo.
2015.
« Integrating network function virtualization with SDR and SDN for 4G/5G networks ».
IEEE Network, vol. 29, nº 3.
pp. 54-59.
Sun, Songlin, Kadoch, Michel et Ran, Tiantian.
2015.
« Adaptive SON and cognitive smart LPN for 5G heterogeneous networks ».
Mobile Networks and Applications, vol. 20, nº 6.
pp. 745-755.
Taherzadeh-Sani, Mohammad et Nabki, Frederic.
2015.
« A 350-MS/s continuous-time delta-sigma modulator with a digitally assisted binary-DAC and a 5-bits two-step-ADC quantizer in 130-nm CMOS ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 23, nº 9.
pp. 1914-1919.
Tahvilian, Amir Masoud, Liu, Zhaoheng, Champliaud, Henri, Hazel, Bruce et Lagacé, Marin.
2015.
« Characterization of grinding wheel grain topography under different robotic grinding conditions using confocal microscope ».
International Journal of Advanced Manufacturing Technology, vol. 80, nº 5.
pp. 1159-1171.
Tang, An, Rabasa-Lhoret, Rémi, Castel, Hélène, Wartelle-Bladou, Claire, Gilbert, Guillaume, Massicotte-Tisluck, Karine, Chartrand, Gabriel, Olivié, Damien, Julien, Anne-Sophie, de Guise, Jacques, Soulez, Gilles et Chiasson, Jean-Louis.
2015.
« Effects of insulin glargine and liraglutide therapy on liver fat as measured by magnetic resonance in patients with type 2 diabetes: a randomized trial ».
Diabetes Care, vol. 38, nº 7.
pp. 1339-1346.
Tang, An, Rabasa-Lhoret, Rémi, Castel, Hélène, Wartelle-Bladou, Claire, Gilbert, Guillaume, Massicotte-Tisluck, Karine, Chartrand, Gabriel, Olivié, Damien, Julien, Anne-Sophie, de Guise, Jacques, Soulez, Gilles et Chiasson, Jean-Louis.
2015.
« Response to comment on Tang et al. effects of insulin glargine and liraglutide therapy on liver fat as measured by magnetic resonance in patients with type 2 diabetes: a randomized trial. diabetes care 2015;38:1339–1346 ».
Diabetes Care, vol. 38, nº 9.
e150-e151.
Tate, D. F., Wilde, E. A., Bouix, S. et McCauley, S. R..
2015.
« Introduction to the brain imaging and behavior special issue: mild traumatic brain injury among active duty service members and veterans ».
[Éditorial]. Brain Imaging and Behavior, vol. 9, nº 3.
pp. 355-357.
Tehrani, Mahdi Mohammadi, Beauregard, Yvan, Rioux, Michel, Kenne, Jean Pierre et Ouellet, Rejean.
2015.
« A predictive preference model for maintenance of a heating ventilating and air conditioning system ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 130-135.
Tencer, L., Reznakova, M. et Cheriet, Mohamed.
2015.
« TITS-FM: Transductive incremental Takagi-Sugeno fuzzy models ».
Applied Soft Computing, vol. 26.
pp. 531-544.
Thomson, Steve, Brooks, Talbot, Huang, Yanbo, Weick, Jason, Fisher, Ken, DeFauw, Sherri, Ouellet-Plamondon, Claudiane et English, Patrick.
2015.
« Thermal imaging: from irrigation management to finding leaks at the levee ».
Resource: Engineering and Technology for Sustainable World, vol. 22, nº 3.
pp. 10-13.
Tongne, A., Jahazi, Mohammad, Feulvarch, E. et Desrayaud, C..
2015.
« Banded structures in friction stir welded Al alloys ».
Journal of Materials Processing Technology, vol. 221.
pp. 269-278.
Torré, J.-P., Haillot, D., Rigal, S., De Souza Lima, Roger, Dicharry, C. et Bedecarrats, J.-P..
2015.
« 1,3 Dioxolane versus tetrahydrofuran as promoters for CO2-hydrate formation: thermodynamics properties, and kinetics in presence of sodium dodecyl sulfate ».
Chemical Engineering Science, vol. 126.
pp. 688-697.
Toselli, M., Fabiani, D., Mancinelli, P., Fréchette, M., Heid, T., David, Éric et Saccani, A..
2015.
« In situ thermal reduction of graphene oxide forming epoxy nanocomposites and their dielectric properties ».
Polymer Composites, vol. 36, nº 2.
pp. 294-301.
Toubal, Lotfi, Bocher, Philippe et Moreau, André.
2015.
« Bimodal dwell-fatigue Weibull distribution of forged titanium IMI 834 ».
International Journal of Damage Mechanics, vol. 24, nº 5.
pp. 629-645.
Tout, Hanine, Mourad, Azzam, Talhi, Chamseddine et Otrok, Hadi.
2015.
« AOMD approach for context-adaptable and conflict-free Web services composition ».
Computers and Electrical Engineering, vol. 44.
pp. 200-217.
Tremblay, Jaëlle, Mac-Thiong, Jean-Marc, Brailovski, Vladimir et Petit, Yvan.
2015.
« Braided tubular superelastic cables provide improved spinal stability compared to multifilament sublaminar cables ».
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 229, nº 9.
pp. 645-651.
Tremblay, Jaëlle, Mac-Thiong, Jean-Marc, Brailovski, Vladimir et Petit, Yvan.
2015.
« Factors affecting intradiscal pressure measurement during in vitrobiomechanical tests ».
Scoliosis, vol. 10, nº Suppl 1.
O19.
Tremblay, Nicolas, Menaceur, Jamil, Poliquin, Denis et Laporte, Claude Y..
2015.
« Mise en place de processus de gestion de projets et d’ingénierie système chez CSiT, une entreprise canadienne dans le domaine du transport collectif ».
Génie logiciel, nº 114.
pp. 11-27.
Triki, Ennouri, Nguyen-Tri, Phuong, Gauvin, Chantal, Azaiez, Meriam et Vu-Khanh, Toan.
2015.
« Combined puncture/cutting of elastomer membranes by pointed blades: characterization of mechanisms ».
Journal of Applied Polymer Science, vol. 132, nº 26.
Triki, Nizar, Kara, Nadjia, El Barachi, May et Hadjres, Souad.
2015.
« A green energy-aware hybrid virtual network embedding approach ».
Computer Networks, vol. 91.
pp. 712-737.
Trochu, Julien, Chaabane, Amin et Ouhimmou, Mustapha.
2015.
« Tactical planning model for procurement and manufacturing decisions under environmental regulations ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 362-367.
Troin, Magali, Arsenault, Richard et Brissette, François.
2015.
« Performance and uncertainty evaluation of snow models on snowmelt flow simulations over a Nordic catchment (Mistassibi, Canada) ».
Hydrology, vol. 2, nº 4.
pp. 289-317.
Troin, Magali, Caya, Daniel, Velázquez, Juan Alberto et Brissette, François.
2015.
« Hydrological response to dynamical downscaling of climate model outputs: A case study for western and eastern snowmelt-dominated Canada catchments ».
Journal of Hydrology: Regional Studies, vol. 4, nº part B.
pp. 595-610.
Troin, Magali, Velzquez, Juan Alberto, Caya, Daniel et Brissette, François.
2015.
« Comparing statistical post-processing of regional and global climate scenarios for hydrological impacts assessment: a case study of two canadian catchments ».
Journal of Hydrology, vol. 520.
pp. 268-288.
Trudel, Bryan, Nadeau, Sylvie, Zaras, Kazimierz et Deschamps, Isabelle.
2015.
« Managing equipment innovations in mining: A review ».
Work: A Journal of Prevention, Assessment & Rehabilitation, vol. 51, nº 4.
pp. 731-746.
Turcot, C. et St-Jacques, Michèle.
2015.
« Aménagement de voies cyclables pour faire du vélo un mode de transport utilitaire au Québec ».
Routes et Transports, vol. 44, nº 2.
pp. 16-18.
Vaillancourt, Michel, Houy, Laurent, Perraton, Daniel et Breysse, Denys.
2015.
« Variability of subgrade soil rigidity and its effects on the roughness of flexible pavements: a probabilistic approach ».
Materials and Structures = Matériaux et Constructions, vol. 48, nº 11.
pp. 3527-3536.
Valentin, Olivier et Laville, Frédéric.
2015.
« Use of auditory steady-state responses in measuring the occlusion effect of hearing protection devices ».
Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 3.
Vega-Azamar, R. E., Romero-López, R., Glaus, Mathias, Oropeza-García, N. A. et Hausler, Robert.
2015.
« Sustainability assessment of the residential land use in seven boroughs of the Island of Montreal, Canada ».
Sustainability, vol. 7, nº 3.
pp. 2454-2472.
Velázquez, Juan Alberto, Troin, Magali, Caya, Daniel et Brissette, François.
2015.
« Evaluating the time-invariance hypothesis of climate model bias correction: Implications for hydrological impact studies ».
Journal of Hydrometeorology, vol. 16, nº 5.
pp. 2013-2026.
Viallet, Guilhem, Sgard, Franck, Laville, Frédéric et Nelisse, Hugues.
2015.
« Investigation of the variability in earplugs sound attenuation measurements using a finite element model ».
Applied Acoustics, vol. 89.
pp. 333-344.
Villavicencio, Mónica et Abran, Alain.
2015.
« Sugerencias para la inclusión de temas de medición de software en un currículo de ingeniería de software para estudiantes de pregrado ».
Revista Latinoamericana de Ingenieria de Software, vol. 3, nº 3.
pp. 117-126.
Vinches, Ludwig et Hallé, Stéphane.
2015.
« La peau est-elle vraiment imperméable aux nanoparticules? ».
Bulletin de Veille Scientifique, nº 27.
pp. 12-15.
Voix, Jérémie.
2015.
« Sonomax-ÉTS industrial research chair in in-ear technologies ».
Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 2.
pp. 48-49.
Wang, Qingsong et Niu, Shuangxia.
2015.
« Electromagnetic design and analysis of a novel fault-tolerant flux-modulated memory machine ».
Energies, vol. 8, nº 8.
pp. 8069-8085.
Wang, Qingsong, Niu, Shuangxia, Ho, Siu Lau, Fu, Weinong et Zuo, Shuguang.
2015.
« Design and analysis of novel magnetic flux-modulated mnemonic machines ».
IET Electric Power Applications, vol. 9, nº 7.
pp. 469-477.
Watson, Sean, Nisol, Bernard, Lerouge, Sophie et Wertheimer, Michael Robert.
2015.
« Energetics of molecular excitation, fragmentation, and polymerization in a dielectric barrier discharge with argon carrier gas ».
Langmuir, vol. 31, nº 37.
pp. 10125-10129.
Wei, Qiliang, Tong, Xin, Zhang, Gaixia, Qiao, Jinlin, Gong, Qiaojuan et Sun, Shuhui.
2015.
« Nitrogen-doped carbon nanotube and graphene materials for oxygen reduction reactions ».
Catalysts, vol. 5, nº 3.
pp. 1574-1602.
Weiss, Julien, Mohammed-Taifour, Abdelouahab et Schwaab, Quentin.
2015.
« Unsteady behavior of a pressure-induced turbulent separation bubble ».
AIAA Journal, vol. 53, nº 9.
pp. 2634-2645.
Wigand, M., Kubicki, M., Clemm Von Hohenberg, C., Leicht, G., Karch, S., Eckbo, R., Pelavin, P. E., Hawley, K., Rujescu, D., Bouix, S., Shenton, M. E. et Mulert, C..
2015.
« Auditory verbal hallucinations and the interhemispheric auditory pathway in chronic schizophrenia ».
World Journal of Biological Psychiatry, vol. 16, nº 1.
pp. 31-44.
Wilde, E. A., Bouix, S., Tate, D. F., Lin, A. P., Newsome, M. R., Taylor, B. A., Stone, J. R., Montier, J., Gandy, S. E., Biekman, B., Shenton, M. E. et York, G..
2015.
« Advanced neuroimaging applied to veterans and service personnel with traumatic brain injury: state of the art and potential benefits ».
Brain Imaging and Behavior, vol. 9, nº 3.
pp. 367-402.
Wong, Tony et Assal, Salah.
2015.
« A multi-neighborhood multi-operator algorithm for the uncapacitated exam proximity problem ».
Journal of Systemics, Cybernetics and Informatics, vol. 13, nº 5.
pp. 56-61.
Wu, Jiayang, Cao, Pan, Pan, Ting, Yang, Yuxing, Qiu, Ciyuan, Tremblay, Christine et Su, Yikai.
2015.
« Compact on-chip 1 x 2 wavelength selective switch based on silicon microring resonator with nested pairs of subrings ».
Photonics Research, vol. 3, nº 1.
pp. 9-14.
Wu, Jiayang, Liu, Boyu, Peng, Jizong, Mao, Junming, Jiang, Xiahong, Qiu, Ciyuan, Tremblay, Christine et Su, Yikai.
2015.
« On-chip tunable second-order differential-equation solver based on a silicon photonic mode-split microresonator ».
Journal of Lightwave Technology, vol. 33, nº 17.
pp. 3542-3549.
Xu, Fan, Gerlein, Luis Felipe, Ma, Xin, Haughn, Chelsea R., Doty, Matthew F. et Cloutier, Sylvain G..
2015.
« Impact of different surface ligands on the optical properties of PbS quantum dot solids ».
Materials, vol. 8, nº 4.
pp. 1858-1870.
Xu, Zhenyu, Tremblay, Christine, Archambault, Émile, Furdek, Marija, Chen, Jiajia, Wosinska, Lena, Bélanger, Michel P. et Littlewood, Paul.
2015.
« Flexible bandwidth allocation in filterless optical networks ».
IEEE Communications Letters, vol. 19, nº 4.
pp. 565-568.
Yafia, Mohamed, Ahmadi, Ali, Hoorfar, Mina et Najjaran, Homayoun.
2015.
« Ultra-portable smartphone controlled integrated digital microfluidic system in a 3D-printed modular assembly ».
Micromachines, vol. 6, nº 9.
pp. 1289-1305.
Yang, J. C., Papadimitriou, G., Eckbo, R., Yeterian, E. H., Liang, L., Dougherty, D. D., Bouix, S., Rathi, Y., Shenton, M., Kubicki, M., Eskandar, E. N. et Makris, N..
2015.
« Multi-tensor investigation of orbitofrontal cortex tracts affected in subcaudate tractotomy ».
Brain Imaging and Behavior, vol. 9, nº 2.
pp. 342-352.
Yang, Lijun, Larouche, Nicholas, Chenitz, Régis, Zhang, Gaixia, Lefèvre, Michel et Dodelet, Jean-Pol.
2015.
« Activity, performance, and durability for the reduction of oxygen in PEM fuel cells, of Fe/N/C electrocatalysts obtained from the pyrolysis of metal-organic-framework and iron porphyrin precursors ».
Electrochimica Acta, vol. 159.
pp. 184-197.
Zaguia, Atef, Tadj, Chakib et Ramdane-Cherif, Amar.
2015.
« Context-based method using bayesian network in multimodal fission system ».
International Journal of Computational Intelligence Systems, vol. 8, nº 6.
pp. 1076-1090.
Zaguia, Atef, Tadj, Chakib et Ramdane-Cherif, Amar.
2015.
« Prototyping using a pattern technique and a context-based bayesian network in multimodal systems ».
International Journal on Smart Sensing and Intelligent Systems, vol. 8, nº 3.
pp. 1667-1686.
Zarour, Mohammad, Abran, Alain, Desharnais, Jean-Marc et Alarifi, Abdulrahman.
2015.
« An investigation into the best practices for the successful design and implementation of lightweight software process assessment methods: a systematic literature review ».
Journal of Systems and Software, vol. 101.
pp. 180-192.
Zerigui, Amel, Dessaint, Louis-A., Hannat, Ridha, Ah King, Robert T. F. et Kamwa, Innocent.
2015.
« Statistical approach for transient stability constrained optimal power flow ».
IET Generation, Transmission and Distribution, vol. 9, nº 14.
pp. 1856-1864.
Zhang, Hai, Hassler, Ulf, Genest, Marc, Fernandes, Henrique, Robitaille, François, Ibarra-Castanedo, Clemente, Joncas, Simon et Maldague, Xavier.
2015.
« Comparative study on submillimeter flaws in stitched T-joint carbon fiber reinforced polymer by infrared thermography, microcomputed tomography, ultrasonic c-scan and microscopic inspection ».
Optical Engineering, vol. 54, nº 10.
Zhang, Qi, Zhani, Mohamed Faten, Yang, Yuke, Boutaba, Raouf et Wong, Bernard.
2015.
« PRISM: fine-grained resource-aware scheduling for MapReduce ».
IEEE Transactions on Cloud Computing, vol. 3, nº 2.
pp. 182-194.
Zhao, Lin, Guan, Dongxue, Landry, René Jr, Cheng, Jianhua et Sydorenko, Kostyantyn.
2015.
« An accurate and fault-tolerant target positioning system for buildings using laser rangefinders and low-cost MEMS-based MARG sensors ».
Sensors, vol. 15, nº 10.
pp. 27060-27086.
Zhao, Longfei, Joubair, Ahmed, Bigras, Pascal et Bonev, Ilian A..
2015.
« Metrological evaluation of a novel medical robot and its kinematic calibration ».
International Journal of Advanced Robotic Systems, vol. 12, nº 9.
Zheng, J., Xie, W. F., Viens, Martin, Birglen, L. et Mantegh, I..
2015.
« Design of an advanced automatic inspection system for aircraft parts based on fluorescent penetrant inspection analysis ».
Insight: Non-Destructive Testing and Condition Monitoring, vol. 57, nº 1.
18-24 and 34.
Zhong, Guoqiang et Cheriet, Mohamed.
2015.
« Tensor representation learning based image patch analysis for text identification and recognition ».
Pattern Recognition, vol. 48, nº 4.
pp. 1211-1224.
Zhukova, Y. S., Pustov, Y. A., Konopatsky, A. S., Dubinskiy, S. M., Filonov, M. R. et Brailovski, V..
2015.
« Corrosion fatigue and electrochemical behavior of superelastic Ti-Nb-Ta alloy for medical implants under cyclic load conditions ».
[Article de conférence]. Materials Today: Proceedings, vol. 2, nº Supp. 3.
S991-S994.
Ziaei Nafchi, H., Shahkolaei, A., Farrahi Moghaddam, R. et Cheriet, Mohamed.
2015.
« FSITM: a feature similarity index for tone-mapped images ».
IEEE Signal Processing Letters, vol. 22, nº 8.
pp. 1026-1029.
Zippo, Antonio, Ferrari, Giovanni, Amabili, Marco, Barbieri, Marco et Pellicano, Francesco.
2015.
« Active vibration control of a composite sandwich plate ».
Composite Structures, vol. 128.
pp. 100-114. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau