| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Document quand le type de document est "Article publié dans une revue, révisé par les pairs" et l'année est 2017Nombre de documents archivés : 598.
GBD 2016 Causes of Death Collaborators.
2017.
« Global, regional, and national age-sex specifc mortality for 264 causes of death, 1980-2016: A systematic analysis for the Global Burden of Disease Study 2016 ».
The Lancet, vol. 390, nº 10100.
pp. 1151-1210.
GBD 2016 Risk Factors Collaborators.
2017.
« Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks, 1990-2016: A systematic analysis for the Global Burden of Disease Study 2016 ».
The Lancet, vol. 390, nº 10100.
pp. 1345-1422.
GBD 2016 DALYs, HALE Collaborators.
2017.
« Global, regional, and national disability-adjusted life-years (DALYs) for 333 diseases and injuries and healthy life expectancy (HALE) for 195 countries and territories, 1990-2016: A systematic analysis for the Global Burden of Disease Study 2016 ».
The Lancet, vol. 390, nº 10100.
pp. 1260-1344.
GBD 2016 Disease and Injury Incidence and Prevalence Collaborators.
2017.
« Global, regional, and national incidence, prevalence, and years lived with disability for 328 diseases and injuries for 195 countries, 1990-2016: A systematic analysis for the Global Burden of Disease Study 2016 ».
The Lancet, vol. 390, nº 10100.
pp. 1211-1259.
Abasian, Foroogh, Ronnqvist, Mikael et Ouhimmou, Mustapha.
2017.
« Forest fibre network design with multiple assortments: a case study in Newfoundland ».
Canadian Journal of Forest Research, vol. 47, nº 9.
pp. 1232-1243.
Abdel-Baki, Amal, Lal, Shalini, Charron, Olivier D., Stip, Emmanuel et Kara, Nadjia.
2017.
« Understanding access and use of technology among youth with first-episode psychosis to inform the development of technology-enabled therapeutic interventions ».
Early Intervention in Psychiatry, vol. 11, nº 1.
pp. 72-76.
Abdolmanafi, Atefeh, Duong, Luc, Dahdah, Nagib et Cheriet, Farida.
2017.
« Deep feature learning for automatic tissue classification of coronary artery using optical coherence tomography ».
Biomedical Optics Express, vol. 8, nº 2.
pp. 1203-1220.
Abed, Asma, Bouzidane, Ahmed, Thomas, Marc et Zahloul, Hamou.
2017.
« Performance characteristics of a three-pad hydrostatic squeeze film damper compensated with new electrorheological valve restrictors ».
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 231, nº 7.
pp. 889-899.
Abid, A., Pereira, D., Fernandes, J. C. et Belanger, P..
2017.
« Sensitivity study of ultrasonic guided waves to cortical bone mechanical properties with axial and circumferential propagation ».
Acta Acustica united with Acustica, vol. 103, nº 3.
pp. 421-429.
Abo-El-Ezz, Ahmad, Houalard, Clémentine, Nollet, Marie-José et Assi, Rola.
2017.
« Vulnerability assessment of seismic induced out-of-plane failure of unreinforced masonry wall buildings ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 44, nº 12.
pp. 1045-1055.
Aboshighiba, Hicham, Bouzidane, Ahmed, Thomas, Marc, Ghezali, Faiza, Nemchi, Amina et Abed, Asmaa.
2017.
« Pressure distribution in orifice-compensated turbulent hydrostatic bearing with fluid inertia effects using numerical simulations via Navier-Stokes ».
Tribology - Materials, Surfaces and Interfaces, vol. 11, nº 1.
pp. 19-29.
Abou-Abbas, Lina, Tadj, Chakib et Fersaie, Hesam Alaie.
2017.
« A fully automated approach for baby cry signal segmentation and boundary detection of expiratory and inspiratory episodes ».
Journal of the Acoustical Society of America, vol. 142, nº 3.
pp. 1318-1331.
Abou-Abbas, Lina, Tadj, Chakib, Gargour, Christian et Montazeri, Leila.
2017.
« Expiratory and inspiratory cries detection using different signals' decomposition techniques ».
Journal of Voice, vol. 31, nº 2.
259.e13-259.e28.
Abuashour, Ahmad et Kadoch, Michel.
2017.
« Performance improvement of cluster-based routing protocol in VANET ».
IEEE Access, vol. 5.
pp. 15354-15371.
Abu-Lebdeh, Mohammad, Naboulsi, Diala, Glitho, Roch et Tchouati, Constant Wette.
2017.
« On the placement of VNF managers in large-scale and distributed NFV systems ».
IEEE Transactions on Network and Service Management, vol. 14, nº 4.
pp. 875-889.
Acher, Mathieu, Lopez-Herrejon, Roberto E. et Rabiser, Rick.
2017.
« Teaching software product lines: A snapshot of current practices and challenges ».
ACM Transactions on Computing Education, vol. 18, nº 1.
Adewusi, Surajdeen et Thomas, Marc.
2017.
« Stress and strain distributions in the human hand-arm system using finite element analysis ».
International Journal of Engineering and Technology (UAE), vol. 6, nº 2.
pp. 21-28.
Ahmid, Ali, Le, Van N. et Dao, Thien M..
2017.
« An optimization procedure for overhead gantry crane exposed to buckling and yield criteria ».
International Journal of Technology and Engineering, vol. 8, nº 2.
p. 11.
Aidibe, Ali, Nejad, Mojtaba Kamali, Tahan, Antoine, Jahazi, Mohammad et Cloutier, Sylvain G..
2017.
« Surface characterization of die inserts used for LED lamp plastic lenses ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 3395-3403.
Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane.
2017.
« Validation of a wearable biometric system’s ability to monitor heart rate in two different climate conditions under variable physical activities ».
E-Health Telecommunication Systems and Networks, vol. 6, nº 2.
pp. 19-30.
Al Shboul, A., Trudeau, C., Cloutier, S., Siaj, M. et Claverie, J. P..
2017.
« Graphene dispersions in alkanes: Toward fast drying conducting inks ».
Nanoscale, vol. 9, nº 28.
pp. 9893-9901.
Alameh, Abdul Hafiz et Nabki, Frederic.
2017.
« A 0.13-μm CMOS dynamically reconfigurable charge pump for electrostatic MEMS actuation ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 25, nº 4.
pp. 1261-1270.
Alejandro Molina, Otilia et Ratté, Sylvie.
2017.
« Students and teacher academic evaluation perceptions: Methodology to construct a representation based on actionable knowledge discovery framework ».
Education and Information Technologies, vol. 22, nº 3.
pp. 1043-1066.
Alhosani, Yousif I., Katsanis, Constantine J. et Alkass, Sabah.
2017.
« Predicting firm performance and the role of top management team (TMT): A fuzzy inference approach ».
International Journal of Innovation, Management and Technology, vol. 8, nº 2.
pp. 144-150.
Almakadmeh, Mhammed et Abran, Alain.
2017.
« The ISBSG software project repository: An analysis from six sigma measurement perspective for software defect estimation ».
Journal of Software Engineering and Applications, vol. 10, nº 8.
pp. 693-720.
Alvarado-Valencia, Jorge A., Tueti Silva, Gabriela C. et Montoya-Torres, Jairo R..
2017.
« Modeling and simulation of customer dissatisfaction in waiting lines and its effects ».
Simulation, vol. 93, nº 2.
pp. 91-101.
Amar, Achraf Ben, Cao, Hung et Kouki, Ammar B..
2017.
« Modeling and process design optimization of a piezoelectric micromachined ultrasonic transducers (PMUT) using lumped elements parameters ».
Microsystem Technologies, vol. 23, nº 10.
pp. 4659-4669.
Anderson, M., Thielin, A. L., Bridier, F., Bocher, P. et Savoie, J..
2017.
« δ Phase precipitation in Inconel 718 and associated mechanical properties ».
Materials Science and Engineering: A, vol. 679.
pp. 48-55.
Andrianarison, Maherizo, Sahmoudi, Mohamed et Landry, René Jr.
2017.
« Efficient and innovative techniques for collective acquisition of weak GNSS signals ».
Journal of Computer and Communications, vol. 5, nº 6.
Arabnejad, Ehsan, Farrahi Moghaddam, Reza et Cheriet, Mohamed.
2017.
« PSI: Patch-based script identification using non-negative matrix factorization ».
Pattern Recognition, vol. 67.
pp. 328-339.
Aranas, Clodualdo, Foul, Anes, Guo, Baoqi, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2017.
« Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ».
Scripta Materialia, vol. 133.
pp. 83-85.
Arfaoui, M. A., Dolez, P. I., Dubé, M. et David, É..
2017.
« Development and characterization of a hydrophobic treatment for jute fibres based on zinc oxide nanoparticles and a fatty acid ».
Applied Surface Science, vol. 397.
pp. 19-29.
Arsenault, Richard, Essou, Gilles R. C. et Brissette, François P..
2017.
« Improving Hydrological Model Simulations with Combined Multi-Input and Multimodel Averaging Frameworks ».
Journal of Hydrologic Engineering, vol. 22, nº 4.
Assunção, Wesley K. G., Lopez-Herrejon, Roberto E., Linsbauer, Lukas, Vergilio, Silvia R. et Egyed, Alexander.
2017.
« Multi-objective reverse engineering of variability-safe feature models based on code dependencies of system variants ».
Empirical Software Engineering, vol. 22, nº 4.
pp. 1763-1794.
Assuncao, Wesley K. G., Lopez-Herrejon, Roberto E., Linsbauer, Lukas, Vergilio, Silvia R. et Egyed, Alexander.
2017.
« Reengineering legacy applications into software product lines: a systematic mapping ».
Empirical Software Engineering, vol. 22, nº 6.
pp. 2972-3016.
Astudillo, Gabriel et Kadoch, Michel.
2017.
« Neighbor discovery and routing schemes for mobile ad-hoc networks with beamwidth adaptive smart antennas ».
Telecommunication Systems, vol. 66, nº 1.
pp. 17-27.
Atikian, Haig A., Latawiec, Pawel, Burek, Michael J., Sohn, Young-Ik, Meesala, Srujan, Gravel, Normand, Kouki, Ammar B. et Lončar, Marko.
2017.
« Freestanding nanostructures via reactive ion beam angled etching ».
APL Photonics, vol. 2, nº 5.
Awaleh, Mohamed Osman, Baudron, Paul, Soubaneh, Youssouf Djibril, Boschetti, Tiziano, Hoch, Farhan Bouraleh, Egueh, Nima Moussa, Mohamed, Jalludin, Dabar, Omar Assowe, Masse-Dufresne, Janie et Gassani, Jean.
2017.
« Recharge, groundwater flow pattern and contamination processes in an arid volcanic area: Insights from isotopic and geochemical tracers (Bara aquifer system, Republic of Djibouti) ».
Journal of Geochemical Exploration, vol. 175.
pp. 82-98.
Azad, Shams, Rigby, Peter C. et Guerrouj, Latifa.
2017.
« Generating API call rules from version history and stack overflow posts ».
ACM Transactions on Software Engineering and Methodology, vol. 25, nº 4.
Baabou, Wafaa, Grunewald, Nicole, Ouellet-Plamondon, Claudiane, Gressot, Michel et Galli, Alessandro.
2017.
« The ecological footprint of Mediterranean cities: awareness creation and policy implications ».
Environmental Science and Policy, vol. 69.
pp. 94-104.
Bahig, H., Lapointe, A., Bedwani, S., Lambert, L., Filion, E. J., Roberge, D., de Guise, J., Letourneau-Guillon, L. et Nguyen-Tan, P. F..
2017.
« Dual-energy computed tomography for prediction of local recurrence in larynx and hypopharynx squamous cell carcinoma ».
[Résumé d'une communication à une conférence]. International Journal of Radiation Oncology*Biology*Physics, vol. 99, nº 2.
S195.
Bahig, Houda, Campeau, Marie-Pierre, Lapointe, Andréanne, Bedwani, Stephane, Roberge, David, de Guise, Jacques, Blais, Danis, Vu, Toni, Lambert, Louise, Chartrand-Lefebvre, Carl, Lord, Martin et Filion, Edith.
2017.
« Phase 1-2 study of dual-energy computed tomography for assessment of pulmonary function in radiation therapy planning ».
International Journal of Radiation Oncology*Biology*Physics, vol. 99, nº 2.
pp. 334-343.
Bahig, Houda, Nguyen-Tan, Phuc Félix, Filion, Édith, Roberge, David, Thanomsack, Pensavan, de Guise, Jacques A., Blais, Danis, Doucet, Robert, Létourneau-Guillon, Laurent et Lambert, Louise.
2017.
« Larynx motion considerations in partial larynx volumetric modulated arc therapy for early glottic cancer ».
Journal of Medical Imaging and Radiation Oncology, vol. 61, nº 5.
pp. 666-673.
Bajamgnigni Gbambie, Abdas Salam, Poulin, Annie, Boucher, Marie-Amélie et Arsenault, Richard.
2017.
« Added value of alternative information in interpolated precipitation datasets for hydrology ».
Journal of Hydrometeorology, vol. 18, nº 1.
pp. 247-264.
Baktash, Seddigheh, Forouzanfar, Mohamad, Batkin, Izmail, Bolic, Miodrag, Groza, Voicu Z., Ahmad, Saif et Dajani, Hilmi R..
2017.
« Characteristic ratio-independent arterial stiffness-based blood pressure estimation ».
IEEE Journal of Biomedical and Health Informatics, vol. 21, nº 5.
pp. 1263-1270.
Balasubramanian, Prabakaran, Ferrari, Giovanni, Amabili, Marco et del Prado, Zenon J. G. N..
2017.
« Experimental and theoretical study on large amplitude vibrations of clamped rubber plates ».
International Journal of Non-Linear Mechanics, vol. 94.
pp. 36-45.
Barkallah, Eya, Freulard, Johan, Otis, Martin J. D., Ngomo, Suzy, Ayena, Johannes C. et Desrosiers, Christian.
2017.
« Wearable devices for classification of inadequate posture at work using neural networks ».
Sensors, vol. 17, nº 9.
Barre, Arnaud, Aissaoui, Rachid, Aminian, Kamiar et Dumas, Raphael.
2017.
« Assessment of the lower limb soft tissue artefact at marker-cluster level with a high-density marker set during walking ».
Journal of Biomechanics, vol. 62, nº 6.
pp. 21-26.
Barros Godoy, Ruben, Buytendorp Bizarro, Douglas, Tessaro de Andrade, Elvey, de Oliveira Soares, Jurandir, Marcondes Justino Ribeiro, Pedro Eugênio, Carniato, Leonardo A., Kimpara, Marcio L. M., Pinto, João O. P., Al-Haddad, Kamal et Canesin, Carlos Alberto.
2017.
« Procedure to match the dynamic response of MPPT and droop-controlled microinverters ».
IEEE Transactions on Industry Applications, vol. 53, nº 3.
pp. 2358-2368.
Barzani, Mohsen Marani, Farahany, Saeed et Songmene, Victor.
2017.
« Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth ».
Measurement: Journal of the International Measurement Confederation, vol. 110.
pp. 263-274.
Bashbaghi, Saman, Granger, Eric, Sabourin, Robert et Bilodeau, Guillaume-Alexandre.
2017.
« Dynamic ensembles of exemplar-SVMs for still-to-video face recognition ».
Pattern Recognition, vol. 69.
pp. 61-81.
Bashbaghi, Saman, Granger, Eric, Sabourin, Robert et Bilodeau, Guillaume-Alexandre.
2017.
« Robust watch-list screening using dynamic ensembles of SVMs based on multiple face representations ».
Machine Vision and Applications, vol. 28, nº 1/2.
pp. 219-241.
Bavand, R., Wei, Q., Zhang, G., Sun, S., Yelon, A. et Sacher, E..
2017.
« PtRu alloy nanoparticles. 2. Chemical and electrochemical surface characterization for methanol oxidation ».
Journal of Physical Chemistry C, vol. 121, nº 41.
pp. 23120-23128.
Beauregard, Yvan, Polotski, Vladimir, Bhuiyan, Nadia et Thomson, Vincent.
2017.
« Optimal utilisation level for lean product development in a multitasking context ».
International Journal of Production Research, vol. 55, nº 3.
pp. 795-818.
Belaidouni, Somia, Miraoui, Moeiz et Tadj, Chakib.
2017.
« Using MVCA to improve architecture modularity of smart spaces ».
Journal of Computer Science, vol. 13, nº 10.
pp. 460-469.
Beloin-Saint-Pierre, Didier, Levasseur, Annie, Margni, Manuele et Blanc, Isabelle.
2017.
« Implementing a dynamic life cycle assessment methodology with a case study on domestic hot water production ».
Journal of Industrial Ecology, vol. 21, nº 5.
pp. 1128-1138.
Belzile, Patrick, Comeau, Félix-Antoine, Raymond, Jasmin, Lamarche, Louis et Carreau, Michel.
2017.
« Arctic climate horizontal ground-coupled heat pump ».
Geothermal Resources Council Transactions, vol. 41.
pp. 1958-1978.
Ben-Assa, Eyal, Di Labbio, Giuseppe, Garcia, Julio, Edelman, Elazer et Kadem, Lyes.
2017.
« Analysis of diastolic vortex flow as a marker of ventricular deterioration in aortic regurgitation ».
[Résumé d'une communication à une conférence]. Journal of the American College of Cardiology, vol. 69, nº 11 suppl..
p. 1976.
BenMimoune, Abderrahmane, Khasawneh, Fawaz A., Rong, Bo et Kadoch, Michel.
2017.
« Dynamic joint resource allocation and relay selection for 5G multi-hop relay systems ».
Telecommunication Systems, vol. 66, nº 2.
pp. 283-294.
BenMimoune, Abderrahmane, Khazawneh, Fawaz A. et Kadoch, Michel.
2017.
« User association-based joint admission and power control for heterogeneous wireless networks ».
Wireless Personal Communications, vol. 96, nº 2.
pp. 2485-2502.
Benzeguir, Zine El Abidine, El-Saikaly, Georges et Chaallal, Omar.
2017.
« Size effect in shear of conventional and shear-strengthened RC beams with EB-FRP: State of knowledge and research needs ».
Global Journal of Advanced Engineering Technologies and Sciences, vol. 4, nº 11.
pp. 1-23.
Bertrand-Grenier, Antony, Lerouge, Sophie, Tang, An, Salloum, Eli, Therasse, Eric, Kauffmann, Claude, Héon, Hélène, Salazkin, Igor, Cloutier, Guy et Soulez, Gilles.
2017.
« Abdominal aortic aneurysm follow-up by shear wave elasticity imaging after endovascular repair in a canine model ».
European Radiology, vol. 27, nº 5.
pp. 2161-2169.
Bi, Eustache Goore, Gachon, Philippe, Vrac, Mathieu et Monette, Frédéric.
2017.
« Which downscaled rainfall data for climate change impact studies in urban areas? Review of current approaches and trends ».
Theoretical and Applied Climatology, vol. 127, nº 3-4.
pp. 685-699.
Bianco, Rohan-Jean, Arnoux, Pierre Jean, Wagnac, Éric, Mac-Thiong, Jean-Marc et Aubin, Carl-Éric.
2017.
« Minimizing pedicle screw pullout risks: a detailed biomechanical analysis of screw design and placement ».
Journal of Spinal Disorders and Techniques, vol. 30, nº 3.
E226-E232.
Blanchard, J. A., Ernst, R. E. et Samson, C..
2017.
« Gravity and magnetic modelling of layered mafic–ultramafic intrusions in large igneous province plume centre regions: Case studies from the 1.27 Ga Mackenzie, 1.38 ga Kunene–Kibaran, 0.06 Ga Deccan, and 0.13–0.08 Ga high arctic events ».
Canadian Journal of Earth Sciences, vol. 54, nº 3.
pp. 290-310.
Boespflug, Gaël, Maire, Marion, De Crescenzo, Gregory, Lerouge, Sophie et Wertheimer, Michael R..
2017.
« Characterization and comparison of N-, O-, and N+O-functionalized polymer surfaces for efficient (HUVEC) endothelial cell colonization ».
Plasma Processes and Polymers, vol. 14, nº 7.
Bonakdar, Ali, Molavi-Zarandi, Marjan, Chamanfar, Ahmad, Jahazi, Mohammad, Firoozrai, Arash et Morin, Eric.
2017.
« Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ».
Journal of Manufacturing Processes, vol. 26.
pp. 339-354.
Bonnard, Beliny, Causse, Philippe et Trochu, François.
2017.
« Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials ».
Journal of Composite Materials, vol. 51, nº 27.
pp. 3807-3818.
Bonnet, Fabien, Voix, Jérémie et Nelisse, Hugues.
2017.
« Loudness in the occluded ear canal: Are we again missing 6 dB? ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 45, nº 3.
pp. 136-137.
Boton, Conrad, Forgues, Daniel et Halin, Gilles.
2017.
« Les enjeux liés à l’intégration de l’approche BIM de modélisation des données du bâtiment à l’enseignement universitaire : cas d’une école d’ingénierie ».
Revue Internationale des Technologies en Pédagogie Universitaire, vol. 14, nº 2.
pp. 5-23.
Boughari, Y., Ghazi, G. et Botez, R. M..
2017.
« Optimal control new methodologies validation on the research aircraft flight simulator of the Cessna Citation X business aircraft ».
International Journal of Contemporary Energy, vol. 3, nº 1.
pp. 9-18.
Boughari, Yamina, Botez, Ruxandra Mihaela, Ghazi, Georges et Theel, Florian.
2017.
« Flight control clearance of the Cessna Citation X using evolutionary algorithms ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 231, nº 3.
pp. 510-532.
Boughari, Yamina, Botez, Ruxandra Mihaela, Theel, Florian et Ghazi, Georges.
2017.
« Cessna citation X business aircraft eigenvalue stability - Part 1: a new GUI for the LFRs generation ».
INCAS Bulletin, vol. 9, nº 4.
pp. 31-43.
Boughari, Yamina, Botez, Ruxandra Mihaela, Theel, Florian et Ghazi, Georges.
2017.
« Cessna citation X business aircraft eigenvalue stability - Part 2: flight envelope analysis ».
INCAS Bulletin, vol. 9, nº 4.
pp. 45-58.
Boughari, Yamina, Ghazi, Georges, Botez, Ruxandra Mihaela et Theel, Florian.
2017.
« New methodology for optimal flight control using differential evolution algorithms applied on the cessna citation X business aircraft - Part 2. validation on aircraft research flight level D simulator ».
INCAS Bulletin, vol. 9, nº 2.
pp. 45-59.
Boughari, Yamina, Ghazi, Georges, Botez, Ruxandra Mihaela et Theel, Florian.
2017.
« New methodology for optimal flight control using differential evolution algorithms applied on the cessna citation x business aircraft - part 1. design and optimization ».
INCAS Bulletin, vol. 9, nº 2.
pp. 31-44.
Boujia, N., Schmidt, F., Siegert, D., Bang, D. P. V. et Chevalier, C..
2017.
« Modelling of a bridge pier subjected to scour ».
[Article de conférence]. Procedia Engineering, vol. 199.
pp. 2925-2930.
Boukherroub, Tasseda, LeBel, Luc et Lemieux, Sébastien.
2017.
« An integrated wood pellet supply chain development: Selecting among feedstock sources and a range of operating scales ».
Applied Energy, vol. 198.
pp. 385-400.
Boukherroub, Tasseda, LeBel, Luc et Ruiz, Angel.
2017.
« A framework for sustainable forest resource allocation: A Canadian case study ».
Omega, vol. 66, Part B.
pp. 224-235.
Bourdot, A., Moussa, T., Gacoin, A., Maalouf, C., Vazquez, P., Thomachot-Schneider, C., Bliard, C., Merabtine, A., Lachi, M., Douzane, O., Karaky, H. et Polidori, G..
2017.
« Characterization of a hemp-based agro-material: Influence of starch ratio and hemp shive size on physical, mechanical, and hygrothermal properties ».
Energy and Buildings, vol. 153.
pp. 501-512.
Bourget, Simon, El-Saikaly, Georges et Chaallal, Omar.
2017.
« Behavior of reinforced concrete T-Beams strengthened in shear using closed carbon fiber-reinforced polymer stirrups made of laminates and ropes ».
ACI Structural Journal, vol. 114, nº 5.
pp. 1087-1098.
Bouserhal, Rachel E., Bockstael, Annelies, MacDonald, Ewen, Falk, Tiago H. et Voix, Jérémie.
2017.
« Modeling speech level as a function of background noise level and talker-to-listener distance for talkers wearing hearing protection devices ».
Journal of Speech, Language, and Hearing Research, vol. 60, nº 12.
pp. 3393-3403.
Bouserhal, Rachel E., Falk, Tiago H. et Voix, Jérémie.
2017.
« In-ear microphone speech quality enhancement via adaptive filtering and artificial bandwidth extension ».
Journal of the Acoustical Society of America, vol. 141, nº 3.
pp. 1321-1331.
Brahmi, Abdelkrim, Saad, Maarouf, Gauthier, Guy, Zhu, Wen-Hong et Ghommam, Jawhar.
2017.
« Adaptive control of multiple mobile manipulators transporting a rigid object ».
International Journal of Control, Automation and Systems, vol. 15, nº 4.
pp. 1779-1789.
Brahmi, Abdelkrim, Saad, Maarouf, Gauthier, Guy, Zhu, Wen-Hong et Ghommam, Jawhar.
2017.
« Adaptive coordinated control of multi-mobile manipulator systems ».
International Journal of Digital Signals and Smart Systems, vol. 1, nº 1.
pp. 3-25.
Brahmi, Abdelkrim, Saad, Maarouf, Gauthier, Guy, Zhu, Wen-Hong et Ghommam, Jawhar.
2017.
« Tracking control of mobile manipulator robot based on adaptive backstepping approach ».
International Journal of Digital Signals and Smart Systems, vol. 1, nº 3.
pp. 224-238.
Briere, Jonathan, Elsayed, Mohannad, Saidani, Menouer, Bérard, Martin, Beaulieu, Philippe-Olivier, Rabbani-Haghighi, Hadi, Nabki, Frederic et Ménard, Michaël.
2017.
« Rotating circular micro-platform with integrated waveguides and latching arm for reconfigurable integrated optics ».
Micromachines, vol. 8, nº 12.
Brisebois, Ronald, Abran, Alain et Nadembega, Apollinaire.
2017.
« A semantic metadata enrichment software ecosystem (SMESE) based on a multi-platform metadata model for digital libraries ».
Journal of Software Engineering and Applications, vol. 10, nº 4.
pp. 370-405.
Brisebois, Ronald, Abran, Alain et Nadembega, Apollinaire.
2017.
« A semantic metadata enrichment software ecosystem based on metadata and affinity models ».
International Journal of Information Technology and Computer Science, vol. 9, nº 8.
Brisebois, Ronald, Abran, Alain, Nadembega, Apollinaire et N'techobo, Philippe.
2017.
« A semantic metadata enrichment software ecosystem based on sentiment and emotion metadata enrichments ».
International Journal of Scientific Research in Science, Engineering and Technology, vol. 3, nº 2.
pp. 625-641.
Brisebois, Ronald, Abran, Alain, Nadembega, Apollinaire et N'techobo, Philippe.
2017.
« A semantic metadata enrichment software ecosystem based on topic metadata enrichments ».
International Journal of Data Mining & Knowledge Management Process (IJDKP), vol. 7, nº 3.
Brisebois, Ronald, Abran, Alain, Nadembega, Apollinaire et N'techobo, Philippe.
2017.
« A semantic metadata enrichment software ecosystembased on machine learning to analyze topic, sentiment and emotions ».
International Journal of Recent Scientific Research, vol. 8, nº 4.
pp. 16698-16714.
Brisebois, Ronald, Abran, Alain, Nadembega, Apollinaire et N'techobo, Philippe.
2017.
« An assisted literature review using machine learning models to identify and build a literature corpus ».
International Journal of Engineering Science Invention, vol. 6, nº 7.
pp. 72-84.
Brisebois, Ronald, Abran, Alain, Nadembega, Apollinaire et N'techobo, Philippe.
2017.
« Efficient scientific research literature ranking model based on text and data mining technique ».
International Journal of Engineering Research and Management, vol. 4, nº 2.
pp. 95-105.
Brisebois, Ronald, Nadembega, Apollinaire et Abran, Alain.
2017.
« Real time software energy consumption measurement in the context of green software ».
Annals the Collegium of Economic Analysis, nº 43.
pp. 175-184.
Brodsky, Sarah B., Ceballos, Cesar et Labbé, Jean-Philippe.
2017.
« Cluster algebras of type D4 , tropical planes, and the positive tropical Grassmannian ».
Beitrage zur Algebra und Geometrie, vol. 58, nº 1.
pp. 25-46.
Brummund, Martin, Brailovski, Vladimir, Petit, Yvan, Facchinello, Yann et Mac-Thiong, Jean-Marc.
2017.
« Impact of anchor type on porcine lumbar biomechanics: Finite element modelling and in-vitro validation ».
Clinical Biomechanics, vol. 43.
pp. 86-94.
Brummund, Martin, Brailovski, Vladimir, Petit, Yvan, Facchinello, Yann et Mac-Thiong, Jean-Marc.
2017.
« Impact of spinal rod stiffness on porcine lumbar biomechanics: Finite element model validation and parametric study ».
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 231, nº 12.
pp. 1071-1080.
Burasa, Pascal, Djerafi, Tarek, Constantin, Nicolas G. et Wu, Ke.
2017.
« On-chip dual-band rectangular slot antenna for single-chip millimeter-wave identification tag in standard CMOS technology ».
IEEE Transactions on Antennas and Propagation, vol. 65, nº 8.
pp. 3858-3868.
Cagnin, A., Choiniere, M., Bureau, N. J., De Polo, L., Saidi, H. et Hagemeister, N..
2017.
« Self-management, functional status and knee-related quality of life in older adults with mid to late-stage knee osteoarthritis ».
[Résumé d'une communication à une conférence]. Osteoarthritis and Cartilage, vol. 25, nº Suppl. 1.
S338-S338.
Cambron, Philippe, Tahan, Antoine, Masson, Christian et Pelletier, Francis.
2017.
« Bearing temperature monitoring of a Wind Turbine using physics-based model ».
Journal of Quality in Maintenance Engineering, vol. 23, nº 4.
pp. 479-488.
Cardona, R., Di Benedetto, H., Sauzeat, C., Calon, N. et Saussine, G..
2017.
« Influence of moisture conditioning on linear viscoelastic behaviour of bituminous mixtures used for railway trackbeds ».
Journal of Testing and Evaluation, vol. 45, nº 1.
pp. 40-50.
Cavka, Hasan Burak, Staub-French, Sheryl et Poirier, Erik A..
2017.
« Developing owner information requirements for BIM-enabled project delivery and asset management ».
Automation in Construction, vol. 83.
pp. 169-183.
Ceccaldi, Caroline, Assaad, Elias, Hui, Eve, Buccionyte, Medeine, Adoungotchodo, Atma et Lerouge, Sophie.
2017.
« Optimization of injectable thermosensitive scaffolds with enhanced mechanical properties for cell therapy ».
Macromolecular Bioscience, vol. 17, nº 6.
Ceccaldi, Caroline, Strandman, Satu, Hui, Eve, Montagnon, Emmanuel, Schmitt, Cédric, Hadj Henni, Anis et Lerouge, Sophie.
2017.
« Validation and application of a nondestructive and contactless method for rheological evaluation of biomaterials ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 105, nº 8.
pp. 2565-2573.
Chaabane, Ibtihel, Banerjee, Debika, Touayar, Oualid et Cloutier, Sylvain G..
2017.
« Shallow V-shape nanostructured pit arrays in germanium using aqua regia electroless chemical etching ».
Materials, vol. 10, nº 8.
Chaddad, Ahmad, Desrosiers, Christian, Hassan, Lama et Tanougast, Camel.
2017.
« Hippocampus and amygdala radiomic biomarkers for the study of autism spectrum disorder ».
BMC Neuroscience, vol. 18, nº 1.
Chaddad, Ahmad, Desrosiers, Christian et Toews, Matthew.
2017.
« Multi-scale radiomic analysis of sub-cortical regions in MRI related to autism, gender and age ».
Scientific Reports, vol. 7.
Chaddad, Ahmad, Desrosiers, Christian, Toews, Matthew et Abdulkarim, Bassam.
2017.
« Predicting survival time of lung cancer patients using radiomic analysis ».
Oncotarget, vol. 8, nº 61.
pp. 104393-104407.
Chadha, K., Shahriari, D., Tremblay, R., Bhattacharjee, P. P. et Jahazi, M..
2017.
« Deformation and recrystallization behavior of the cast structure in large size, high strength steel ingots: Experimentation and modeling ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48, nº 9.
pp. 4297-4313.
Chamanfar, Ahmad, Monajati, Hossein, Rosenbaum, Alex, Jahazi, Mohammad, Bonakdar, Ali et Morin, Eric.
2017.
« Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ».
Materials Characterization, vol. 132.
pp. 53-68.
Chamseddine, Abbas, Akhrif, Ouassima, Charland-Arcand, Guillaume, Gagnon, François et Couillard, Denis.
2017.
« Communication relay for multiground units with unmanned aerial vehicle using only signal strength and angle of arrival ».
IEEE Transactions on Control Systems Technology, vol. 25, nº 1.
pp. 286-293.
Chang, Rong, Zheng, Lijun, Wang, Chengwen, Yang, Dachi, Zhang, Gaixia et Sun, Shuhui.
2017.
« Synthesis of hierarchical platinum-palladium-copper nanodendrites for efficient methanol oxidation ».
Applied Catalysis B: Environmental, vol. 211.
pp. 205-211.
Chapuis, R. P. et Duhaime, F..
2017.
« Taking into account data accuracy for interpretation of slug tests in confined or unconfined aquifers ».
Geotechnical Testing Journal, vol. 40, nº 1.
pp. 122-133.
Chartrand, Gabriel, Cresson, Thierry, Chav, Ramnada, Gotra, Akshat, Tang, An et de Guise, Jacques A..
2017.
« Liver segmentation on CT and MR using Laplacian mesh optimization ».
IEEE Transactions on Biomedical Engineering, vol. 64, nº 9.
pp. 2110-2121.
Chehouri, Adam, Younes, Rafic, Khoder, Jihan, Perron, Jean et Ilinca, Adrian.
2017.
« A selection process for genetic algorithm using clustering analysis ».
Algorithms, vol. 10, nº 4.
Chen, Hao et Labbé, Jean-Philippe.
2017.
« Limit directions for Lorentzian Coxeter systems ».
Groups, Geometry, and Dynamics, vol. 11, nº 2.
pp. 469-498.
Chen, Jianqiang, Demers, Vincent, Cadotte, Eve-Line, Turner, Daniel et Bocher, Philippe.
2017.
« Structural performance of inconel 625 superalloy brazed joints ».
Journal of Materials Engineering and Performance, vol. 26, nº 2.
pp. 547-553.
Chen, Jie, Arsenault, Richard et Brissette, François P..
2017.
« An experimental approach to reduce the parametric dimensionality for rainfall–runoff models ».
Hydrology Research, vol. 48, nº 1.
pp. 48-65.
Chen, Jie et Brissette, Francois P..
2017.
« Hydrological modelling using proxies for gauged precipitation and temperature ».
Hydrological Processes, vol. 31, nº 22.
pp. 3881-3897.
Chen, Jie, Brissette, François P., Liu, Pan et Xia, Jun.
2017.
« Using raw regional climate model outputs for quantifying climate change impacts on hydrology ».
Hydrological Processes, vol. 31, nº 24.
4398–4413.
Chen, Jie, Brissette, François P., Lucas-Picher, Philippe et Caya, Daniel.
2017.
« Impacts of weighting climate models for hydro-meteorological climate change studies ».
Journal of Hydrology, vol. 549.
pp. 534-546.
Chen, Na, Rong, Bo, Zhang, Xinran et Kadoch, Michel.
2017.
« Scalable and flexible massive mimo precoding for 5G H-CRAN ».
IEEE Wireless Communications, vol. 24, nº 1.
pp. 46-52.
Chénier, Félix, Aissaoui, Rachid, Gauthier, Cindy et Gagnon, Dany H..
2017.
« Wheelchair pushrim kinetics measurement: A method to cancel inaccuracies due to pushrim weight and wheel camber ».
Medical Engineering and Physics, vol. 40, nº 1.
pp. 75-86.
Chentouf, S. M., Belhadj, T., Bombardier, N., Brodusch, N., Gauvin, R. et Jahazi, M..
2017.
« Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 2929-2937.
Chherawala, Youssouf, Roy, Partha Pratim et Cheriet, Mohamed.
2017.
« Combination of context-dependent bidirectional long short-term memory classifiers for robust offline handwriting recognition ».
Pattern Recognition Letters, vol. 90.
pp. 58-64.
Cicek, Paul-Vahe, Elsayed, Mohannad, Nabki, Frederic et El-Gamal, Mourad.
2017.
« A novel multi-level IC-compatible surface microfabrication technology for MEMS with independently controlled lateral and vertical submicron transduction gaps ».
Journal of Micromechanics and Microengineering, vol. 27, nº 11.
Clément, Julien, Dumas, Raphaël, Hagemeister, Nicola et de Guise, Jacques A..
2017.
« Can generic knee joint models improve the measurement of osteoarthritic knee kinematics during squatting activity? ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 20, nº 1.
pp. 94-103.
Clément, Julien, Ménard, Jérémie, Raison, Maxime, Dumais, Jennifer, Dubois, Laura et Rouleau, Dominique M..
2017.
« Three-dimensional analysis of the locked position in patients with recurrent shoulder instability ».
Journal of Shoulder and Elbow Surgery, vol. 26, nº 3.
pp. 536-543.
Comot, P., Bocher, P. et Belanger, P..
2017.
« Ultrasonic guided wave inspection of Inconel 625 brazed lap joints: Simulation and experimentation ».
NDT and E International, vol. 91.
pp. 71-78.
Conti, Jessica, Ozell, Benoit, Paquette, Eric et Renaud, Patrice.
2017.
« Adjusting stereoscopic parameters by evaluating the point of regard in a virtual environment ».
Computers and Graphics, vol. 69.
pp. 24-35.
Cruz, Rafael M. O., Sabourin, Robert et Cavalcanti, George D. C..
2017.
« META-DES.Oracle: Meta-learning and feature selection for dynamic ensemble selection ».
Information Fusion, vol. 38.
pp. 84-103.
Curtat, Jean-Loup, Lanteigne, Jacques, Champliaud, Henri, Liu, Zhaoheng et Lévesque, Jean-Benoît.
2017.
« Influence of hammer peening on fatigue life of E309L steel used for 13%Cr-4%Ni blade runner repairs ».
International Journal of Fatigue, vol. 100.
pp. 68-77.
Dabaghi, Fahimeh, Movahedi, Zeinab et Langar, Rami.
2017.
« A survey on green routing protocols using sleep-scheduling in wired networks ».
Journal of Network and Computer Applications, vol. 77.
pp. 106-122.
Dagenais, F., Gagnon, J. et Paquette, E..
2017.
« Detail-preserving explicit mesh projection and topology matching for particle-based fluids ».
Computer Graphics Forum, vol. 36, nº 8.
pp. 444-457.
Dahmani, H. et Tadj, C..
2017.
« Quantifying baby crying rhythm abnormalities using multilayer perceptron ».
The Mediterranean Journal of Measurement and Control, vol. 13, nº 4.
pp. 824-833.
Dancila, Bogdan D. et Botez, Ruxandra M..
2017.
« Geographical area selection and construction of a corresponding routing grid used for in-flight management system flight trajectory optimization ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 231, nº 5.
pp. 809-822.
Dandres, Thomas, Farrahi Moghaddam, Reza, Nguyen, Kim Khoa, Lemieux, Yves, Samson, Réjean et Cheriet, Mohamed.
2017.
« Consideration of marginal electricity in real-time minimization of distributed data centre emissions ».
Journal of Cleaner Production, vol. 143.
pp. 116-124.
Dandres, Thomas, Vandromme, Nathan, Obrekht, Glasha, Wong, Andy, Nguyen, Kim Khoa, Lemieux, Yves, Cheriet, Mohamed et Samson, Réjean.
2017.
« Consequences of future data center deployment in canada on electricity generation and environmental impacts: A 2015-2030 prospective study ».
Journal of Industrial Ecology, vol. 21, nº 5.
pp. 1312-1322.
Daoud, M., Chatelain, J. F. et Bouzid, A..
2017.
« Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ».
International Journal of Mechanical Sciences, vol. 122.
pp. 392-404.
Daoust, Marc-Kevin.
2017.
« Epistemic uniqueness and the practical relevance of epistemic practices ».
Philosophia, vol. 45, nº 4.
pp. 1721-1733.
Daoust, Marc-Kevin.
2017.
« La neutralité axiologique, vertu professorale ou exigence institutionnelle? ».
Penser l'éducation, vol. 40, nº 1.
pp. 24-44.
de Assis, Cleverson Faber, Ferreira, William de Paula, Tanaka, Wilson Yoshio et da Silva, Adriano Maniçoba.
2017.
« Os primeiros passos em busca da transformação enxuta : Um estudo de caso de uma pequena empresa de painéis isotérmicos ».
South American Development Society Journal, vol. 3, nº 9.
pp. 14-30.
de Assis, Juliana Ramos Costa, de Paula Ferreira, William, Assis, Gleisson et Neto, Antônio Mendes de Oliveira.
2017.
« Eliminação do processo de queima na fabricação de arame tubular para soldagem ».
Espacios, vol. 38, nº 26.
de Castilla, Hector, Bélanger, Pierre et Zednik, Ricardo J..
2017.
« High temperature characterization of piezoelectric lithium niobate using electrochemical impedance spectroscopy resonance method ».
Journal of Applied Physics, vol. 122, nº 24.
de Oliveira, Cesar Augusto Souza, de Paula Ferreira, William, Mendes, Reinaldo Carlos, de Assis, Gleisson et Souza, Marcone Jamilson Freitas.
2017.
« Metaheuristic ILS with path relinking for the number partitioning problem ».
Independent Journal of Management & Production, vol. 8, nº 5.
pp. 767-779.
de Paula, Nathalia, Arditi, David et Melhado, Silvio.
2017.
« Managing sustainability efforts in building design, construction, consulting, and facility management firms ».
Engineering, Construction and Architectural Management, vol. 24, nº 6.
pp. 1040-1050.
Debia, Maximilien, Couture, Caroline, Njanga, Pierre-Eric, Neesham-Grenon, Eve, Lachapelle, Guillaume, Coulombe, Hugo, Hallé, Stéphane et Aubin, Simon.
2017.
« Diesel engine exhaust exposures in two underground mines ».
International Journal of Mining Science and Technology, vol. 27, nº 4.
pp. 641-645.
Delahaigue, J., Chatelain, J. F. et Lebrun, G..
2017.
« Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates ».
[Article de conférence]. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 231, nº 1-2.
pp. 196-209.
Delahaigue, Jérémy, Chatelain, Jean-Francois et Lebrun, Gilbert.
2017.
« Influence of cutting temperature on the tensile strength of a carbon fiber-reinforced polymer ».
Fibers, vol. 5, nº 4.
Demers, Sébastien, Nadeau, Sylvie et Bouzid, Abdel-Hakim.
2017.
« Analytical evaluation of stresses and displacements of an intervertebral disc ».
Journal of Biomechanical Science and Engineering, vol. 12, nº 3.
Derbel, Oussama et Landry, René Jr..
2017.
« Driver behavior assessment in case of critical driving situations ».
IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, vol. E100A, nº 2.
pp. 491-498.
Desbois, Adrien, Perreault, Isabelle, Chartrand, Gabriel, Cresson, Thierry, Gervais, Sylvie et de Guise, Jacques A..
2017.
« Toward a quantified assessment of total body surface area from anthropometric measurements for patients with burn injuries ».
International Journal of Human Factors Modelling and Simulation, vol. 5, nº 4.
pp. 306-313.
Deschambault, Olivier, Gherbi, Abdelouahed et Légaré, Christian.
2017.
« Efficient implementation of the MQTT protocol for embedded systems ».
Journal of Information Processing Systems, vol. 13, nº 1.
pp. 26-39.
Desjardins, Marie-Ève, Carrier, Julie, Lina, Jean-Marc, Fortin, Maxime, Gosselin, Nadia, Montplaisir, Jacques et Zadra, Antonio.
2017.
« EEG functional connectivity prior to sleepwalking: Evidence of interplay between sleep and wakefulness ».
Sleep, vol. 40, nº 4.
Di Labbio, Giuseppe, Vétel, Jerome et Kadem, Lyes.
2017.
« Lagrangian coherent structures in the left ventricle in the presence of aortic valve regurgitation ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 62, nº 14.
p. 116.
Diabat, Ali, Dehghani, Ehsan et Jabbarzadeh, Armin.
2017.
« Incorporating location and inventory decisions into a supply chain design problem with uncertain demands and lead times ».
Journal of Manufacturing Systems, vol. 43.
pp. 139-149.
Dias de Assunção, Marcos, Carpa, Radu, Lefèvre, Laurent, Glück, Olivier, Boryło, Piotr, Lason, Artur, Szymaski, Andrzej et Rzepka, Michal.
2017.
« Designing and building SDN testbeds for energy-aware traffic engineering services ».
Photonic Network Communications, vol. 34, nº 3.
pp. 396-410.
Diaz, Moise, Ferrer, Miguel A., Eskander, George S. et Sabourin, Robert.
2017.
« Generation of duplicated off-line signature images for verification systems ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 39, nº 5.
pp. 951-964.
Dorval, Jonathan, Masson, Christian et Gagnon, Yves.
2017.
« On the improvement of wind power predictions based on terrain characteristics and measurements of the annual energy production ».
Journal of Flow Control, Measurement & Visualization, vol. 5, nº 1.
Drouin, Simon, Kochanowska, Anna, Kersten-Oertel, Marta, Gerard, Ian J., Zelmann, Rina, De Nigris, Dante, Bériault, Silvain, Arbel, Tal, Sirhan, Denis, Sadikot, Abbas F., Hall, Jeffery A., Sinclair, David S., Petrecca, Kevin, DelMaestro, Rolando F. et Collins, D. Louis.
2017.
« IBIS: an OR ready open-source platform for image-guided neurosurgery ».
International Journal of Computer Assisted Radiology and Surgery, vol. 12, nº 3.
pp. 363-378.
Duclos, Noémie, Tavares, Larissa Aguiar, Parent, Gerald, Aissaoui, Rachid, Nadeau, Sylvie et Duclos, Cyril.
2017.
« Quantitative and qualitative measures of poststroke walking activity with inertial technologies ».
[Article de conférence]. Annals of Physical and Rehabilitation Medicine, vol. 60, nº suppl..
e41-e42.
Duhaime, François, Chapuis, Robert P., Marefat, Vahid et Benabdallah, El Mehdi.
2017.
« Influence of seasonal hydraulic head changes on slug tests conducted in shallow low-permeability soils ».
Engineering Geology, vol. 228.
pp. 385-394.
Dumas, Mathieu, Terriault, Patrick et Brailovski, Vladimir.
2017.
« Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials ».
Materials and Design, vol. 121.
pp. 383-392.
Eddy, Alex M., Mark, Bryan G., Baraër, Michel, McKenzi, Jeffrey, Fernández, Alfonso, Welch, Susan et Fortner, Sarah.
2017.
« Explorando patrones y controles en la hidroquímica de corrientes proglaciales en el Alto Río Santa, Perú ».
Revista de Glaciares y Ecosistemas de Montaña, vol. 3.
pp. 41-57.
Ekladious, George, Sabourin, Robert et Granger, Eric.
2017.
« Learning global-local distance metrics for signature-based biometric cryptosystems ».
Cryptography, vol. 1, nº 3.
El Fakhri, Maria Barbara, Di Labbio, Giuseppe, Kadem, Lyes, Ng, Hoi Dick et Ait Abderrahmane, Hamid.
2017.
« An analogy between the merger of two black holes and the collision of two point-vortices ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 62, nº 14.
p. 392.
Elgnemi, Tarek, Ahmadi, Keivan, Songmene, Victor, Nam, Jungsoo et Jun, Martin B. G..
2017.
« Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite ».
Journal of Manufacturing Processes, vol. 30.
pp. 133-140.
Elkhatib, Yehia, Porter, Barry, Ribeiro, Heverson B., Zhani, Mohamed Faten, Qadir, Junaid et Rivière, Etienne.
2017.
« On using micro-clouds to deliver the fog ».
IEEE Internet Computing, vol. 21, nº 2.
pp. 8-15.
Elsayed, Mohannad Y. et Nabki, Frederic.
2017.
« 18-MHZ Silicon lamé mode resonators with corner and central anchor architectures in a dual-wafer SOI technology ».
Journal of Microelectromechanical Systems, vol. 26, nº 1.
pp. 67-74.
Elsayed, Mohannad Y. et Nabki, Frederic.
2017.
« Piezoelectric bulk mode disk resonator post-processed for enhanced quality factor performance ».
Journal of Microelectromechanical Systems, vol. 26, nº 1.
pp. 75-83.
Errico, Fausto, Crainic, Teodor Gabriel, Malucelli, Federico et Nonato, Maddalena.
2017.
« A benders decomposition approach for the symmetric TSP with generalized latency arising in the design of semiflexible transit systems ».
Transportation Science, vol. 51, nº 2.
pp. 706-722.
Essaadali, Riadh, Aliouane, Said, Jebali, Chokri et Kouki, Ammar.
2017.
« Optimization of multi-standard transmitter architecture using single-double conversion technique used for rescue operations ».
Advances in Science, Technology and Engineering Systems Journal, vol. 2, nº 3.
pp. 73-81.
Essou, Gilles R. C., Brissette, François et Lucas-Picher, Philippe.
2017.
« Impacts of combining reanalyses and weather station data on the accuracy of discharge modelling ».
Journal of Hydrology, vol. 545.
pp. 120-131.
Essou, Gilles R. C., Brissette, François et Lucas-Picher, Philippe.
2017.
« The use of reanalyses and gridded observations as weather input data for a hydrological model: Comparison of performances of simulated river flows based on the density of weather stations ».
Journal of Hydrometeorology, vol. 18, nº 2.
pp. 497-513.
Facchinello, Yann, Wagnac, Éric, Ung, Bora, Petit, Yvan, Pradhan, Prabin, Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc.
2017.
« Development of an instrumented spinal cord surrogate using optical fibers: A feasibility study ».
Medical Engineering and Physics, vol. 48.
pp. 212-216.
Fahimnia, Behnam, Jabbarzadeh, Armin, Ghavamifar, Al et Bell, Michael.
2017.
« Supply chain design for efficient and effective blood supply in disasters ».
International Journal of Production Economics, vol. 183.
pp. 700-709.
Fahsi, Adil et Soulaimani, Azzeddine.
2017.
« Numerical investigations of the XFEM for solving two-phase incompressible flows ».
International Journal of Computational Fluid Dynamics, vol. 31, nº 3.
pp. 135-155.
Fall, A., Jahazi, M., Khodabandeh, A. R. et Fesharakib, M. H..
2017.
« Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8.
pp. 2919-2931.
Farahani, Rouhollah Dermanaki et Dubé, Martine.
2017.
« Novel heating elements for induction welding of carbon fiber/polyphenylene sulfide thermoplastic composites ».
Advanced Engineering Materials, vol. 19, nº 11.
Faraji, Faramarz, Mousavi G, S. M., Hajirayat, Aliasghar, Birjandi, Ali Akbar Moti et Al-Haddad, Kamal.
2017.
« Single-stage single-phase three-level neutral-point-clamped transformerless grid-connected photovoltaic inverters: Topology review ».
Renewable and Sustainable Energy Reviews, vol. 80.
pp. 197-214.
Fareh, F., Demers, V., Demarquette, N. R., Turenne, S. et Scalzo, O..
2017.
« Influence of segregation on rheological properties of wax-based feedstocks ».
Powder Technology, vol. 320.
pp. 273-284.
Fareh, Raouf, Brahmi, Abdelkrim, Saad, Mohamad, Saad, Maarouf et Bettayeb, Maamar.
2017.
« Tracking control for non-holonomic mobile manipulator using decentralised control strategy ».
International Journal of Modelling, Identification and Control, vol. 28, nº 1.
pp. 58-69.
Farrahi Moghaddam, Reza, Asghari, Vahid, Farrahi Moghaddam, Fereydoun, Lemieux, Yves et Cheriet, Mohamed.
2017.
« A Monte-Carlo approach to lifespan failure performance analysis of the network fabric in modular data centers ».
Journal of Network and Computer Applications, vol. 87.
pp. 131-146.
Fechter, Tobias, Adebahr, Sonja, Baltas, Dimos, Ben Ayed, Ismail, Desrosiers, Christian et Dolz, Jose.
2017.
« Esophagus segmentation in CT via 3D fully convolutional neural network and random walk ».
Medical Physics, vol. 44, nº 12.
pp. 6341-6352.
Ferreira, William de Paula, Silva, Adriano Maniçoba da, Zampini, Eugênio de Felice et Pires, Clayton.
2017.
« Applicability of the Lean thinking in bakeries ».
Espacios, vol. 38, nº 2.
Fong, David, Grégoire-Gélinas, Pascal, Cheng, Alexandre P., Mezheritsky, Tal, Lavertu, Marc, Sato, Sachiko et Hoemann, Caroline D..
2017.
« Lysosomal rupture induced by structurally distinct chitosans either promotes a type 1 IFN response or activates the inflammasome in macrophages ».
Biomaterials, vol. 129.
pp. 127-138.
Forest, M., Iturria-Medina, Y., Goldman, J. S., Kleinman, C. L., Lovato, A., Oros Klein, K., Evans, A., Ciampi, A., Labbe, A. et Greenwood, C. M. T..
2017.
« Gene networks show associations with seed region connectivity ».
Human Brain Mapping, vol. 38, nº 6.
pp. 3126-3140.
Forgues, Daniel, Chiocchio, François, Lavallée, Audrey et Laberge, Vincent.
2017.
« Performance de la conception intégrée et intégration des technologies de l’information dans un contexte de travail multidisciplinaire : une étude exploratoire ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 44, nº 2.
pp. 129-137.
Foroozmehr, Fayaz, Verreman, Yves, Chen, Jianqiang, Thibault, Denis et Bocher, Philippe.
2017.
« Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels ».
Engineering Fracture Mechanics, vol. 175.
pp. 262-278.
Forouzanfar, Mohamad, Mabrouk, Mohamed, Rajan, Sreeraman, Bolic, Miodrag, Dajani, Hilmi R. et Groza, Voicu Z..
2017.
« Event recognition for contactless activity monitoring using phase-modulated continuous wave radar ».
IEEE Transactions on Biomedical Engineering, vol. 64, nº 2.
pp. 479-491.
Francis, Adel.
2017.
« Chronographic allocation techniques for construction projects ».
Journal of Civil Engineering and Science, vol. 6, nº 1.
pp. 24-36.
Francis, Adel.
2017.
« Simulating uncertainties in construction projects with chronographical scheduling logic ».
Journal of Construction Engineering and Management, vol. 143, nº 1.
Furno, Angelo, Naboulsi, Diala, Stanica, Razvan et Fiore, Marco.
2017.
« Mobile demand profiling for cellular cognitive networking ».
IEEE Transactions on Mobile Computing, vol. 16, nº 3.
pp. 772-786.
Gagné, Pierre-Luc, Fortier, Marlène, Fraser, Marc, Parent, Lise, Vaillancourt, Cathy et Verreault, Jonathan.
2017.
« Dechlorane Plus induces oxidative stress and decreases cyclooxygenase activity in the blue mussel ».
Aquatic Toxicology, vol. 188.
pp. 26-32.
Gandi, Apparao, Carter, Alan et Singh, Dharamveer.
2017.
« Rheological behavior of cold recycled asphalt materials with different contents of recycled asphalt pavements ».
Innovative Infrastructure Solutions, vol. 2, nº 1.
p. 45.
Gangadharan, Deepak Thrithamarassery, Xu, Zhenhe, Liu, Yanlong, Izquierdo, Ricardo et Ma, Dongling.
2017.
« Recent advancements in plasmon-enhanced promising third-generation solar cells ».
Nanophotonics, vol. 6, nº 1.
pp. 153-175.
Garcia-Alvarado, Marthy, Paquet, Marc, Chaabane, Amin et Amodeo, Lionel.
2017.
« Inventory management under joint product recovery and cap-and-trade constraints ».
Journal of Cleaner Production, vol. 167.
pp. 1499-1517.
Gaudreau, Marc-André, Sgard, Franck, Laville, Frédéric et Nélisse, Hugues.
2017.
« A finite element model to improve noise reduction based attenuation measurement of earmuffs in a directional sound field ».
Applied Acoustics, vol. 119.
pp. 66-77.
Gauvin, Mathieu, Sustar, Maja, Little, John M., Brecelj, Jelka, Lina, Jean-Marc et Lachapelle, Pierre.
2017.
« Quantifying the ON and OFF Contributions to the Flash ERG with the Discrete Wavelet Transform ».
Translational Vision Science and Technology, vol. 6, nº 1.
Gawanmeh, Amjad, Abu Omar, Abdullah et April, Alain.
2017.
« Design and analysis of control strategies for a cyber physical system ».
Computer Systems Science and Engineering, vol. 32, nº 5.
pp. 397-403.
Gawanmeh, Amjad, Alomari, Ahmad et April, Alain.
2017.
« Optimizing resource allocation scheduling in cloud computing services ».
Journal of Theoretical and Applied Information Technology, vol. 95, nº 1.
pp. 31-39.
Genc-Nayebi, Necmiye et Abran, Alain.
2017.
« A systematic literature review: Opinion mining studies from mobile app store user reviews ».
Journal of Systems and Software, vol. 125.
pp. 207-219.
Gendron, Mathieu, Hazel, Bruce, Boudreault, Eric, Champliaud, Henri et Pham, Xuan-Tan.
2017.
« Modeling circular inductors coupled to a semi-infinite magnetic medium considering the proximity effect ».
Journal of Electromagnetic Waves and Applications, vol. 31, nº 13.
pp. 1232-1254.
Genoyer, Julie, Yee, Marcio, Soulestin, Jérémie et Demarquette, Nicole.
2017.
« Compatibilization mechanism induced by organoclay in PMMA/PS blends ».
Journal of Rheology, vol. 61, nº 4.
pp. 613-626.
Georges, Semaan W., Kanaan, Hadi Y., Hayek, Alferd M. et Al-Haddad, Kamal.
2017.
« Modeling, simulation and control design of a PWM three-phase four-wire shunt active power filter for a 60 kW industrial load ».
International Journal on Energy Conversion, vol. 5, nº 2.
pp. 51-59.
Geraldo, R. H., Ouellet-Plamondon, C. M., Muianga, E. A. D. et Camarini, G..
2017.
« Alkali-activated binder containing wastes: a study with rice husk ash and red ceramic ».
Cerâmica, vol. 63, nº 365.
pp. 44-51.
Ghafarizadeh, Seyedbehzad, Tahvilian, Amir Masoud, Chatelain, Jean-François, Liu, Zhaoheng, Champliaud, Henri et Lebrun, Gilbert.
2017.
« Numerical simulation of ball-end milling with SPH method ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 1.
pp. 401-408.
Ghezali, Faiza, Bouzidane, Ahmed et Thomas, Marc.
2017.
« 3D Numerical investigation of pressure field of an orifice compensated hydrostatic bearing ».
Mechanics and Industry, vol. 18, nº 1.
Ghodrati, Amir, Diba, Ali, Pedersoli, Marco, Tuytelaars, Tinne et Van Gool, Luc.
2017.
« DeepProposals: Hunting objects and actions by cascading deep convolutional layers ».
International Journal of Computer Vision, vol. 124, nº 2.
pp. 115-131.
Gholami, Mohammad S., Doutres, Olivier et Atalla, Noureddine.
2017.
« Effect of microstructure closed-pore content on the mechanical properties of flexible polyurethane foam ».
International Journal of Solids and Structures, vol. 112.
pp. 97-105.
Ghommam, Jawhar et Saad, Maarouf.
2017.
« Autonomous landing of a quadrotor on a moving platform ».
IEEE Transactions on Aerospace and Electronic Systems, vol. 53, nº 3.
pp. 1504-1519.
Giard, Pascal, Balatsoukas-Stimming, Alexios, Muller, Thomas Christoph, Bonetti, Andrea, Thibeault, Claude, Gross, Warren J., Flatresse, Philippe et Burg, Andreas.
2017.
« PolarBear: A 28 nm FD-SOI ASIC for decoding of polar codes ».
IEEE Journal on Emerging and Selected Topics in Circuits and Systems, vol. 7, nº 4.
pp. 616-629.
Godat, Ahmed, Ceroni, Francesca, Chaallal, Omar et Pecce, Marisa.
2017.
« Evaluation of FRP-to-concrete anchored joints designed for FRP shear-strengthened RC T-beams ».
Composite Structures, vol. 176.
pp. 481-495.
Godenzoni, Carlotta, Graziani, Andrea et Perraton, Daniel.
2017.
« Complex modulus characterisation of cold-recycled mixtures with foamed bitumen and different contents of reclaimed asphalt ».
Road Materials and Pavement Design, vol. 18, nº 1.
pp. 130-150.
González-Neira, Eliana M. et Montoya-Torres, Jairo R..
2017.
« A GRASP meta-heuristic for the hybrid flowshop scheduling problem ».
Journal of Decision Systems, vol. 26, nº 3.
pp. 294-306.
González-Neira, Eliana María, Montoya-Torres, Jairo R. et Barrera, David.
2017.
« Flow-shop scheduling problem under uncertainties: Review and trends ».
International Journal of Industrial Engineering Computations, vol. 8, nº 4.
pp. 399-426.
Gorelick, Lena, Boykov, Yuri, Veksler, Olga, Ben Ayed, Ismail et Delong, Andrew.
2017.
« Local submodularization for binary pairwise energies ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 39, nº 10.
pp. 1985-1999.
Gotra, Akshat, Chartrand, Gabriel, Vu, Kim-Nhien, Vandenbroucke-Menu, Franck, Massicotte-Tisluck, Karine, de Guise, Jacques A. et Tang, An.
2017.
« Comparison of MRI- and CT-based semiautomated liver segmentation: a validation study ».
Abdominal Radiology, vol. 42, nº 2.
pp. 478-489.
Gotra, Akshat, Sivakumaran, Lojan, Chartrand, Gabriel, Vu, Kim-Nhien, Vandenbroucke-Menu, Franck, Kauffmann, Claude, Kadoury, Samuel, Gallix, Benoît, de Guise, Jacques A. et Tang, An.
2017.
« Liver segmentation: indications, techniques and future directions ».
Insights into Imaging, vol. 8, nº 4.
pp. 377-392.
Goudarzi, Mohammad Ali et Landry, René Jr.
2017.
« Assessing horizontal positional accuracy of Google Earth imagery in the city of Montreal, Canada ».
Geodesy and Cartography, vol. 43, nº 2.
pp. 56-65.
Graziani, A., Di Benedetto, H., Perraton, D., Sauzeat, C., Hofko, B., Poulikakos, L. D. et Pouget, S..
2017.
« Recommendation of RILEM TC 237-SIB on complex Poisson's ratio characterization of bituminous mixtures ».
Materials and Structures = Matériaux et Constructions, vol. 50, nº 2.
Grégoire, Luc-André, Fortin Blanchette, Handy, Bélanger, Jean et Al-Haddad, Kamal.
2017.
« A stability and accuracy validation method for multirate digital simulation ».
IEEE Transactions on Industrial Informatics, vol. 13, nº 2.
pp. 512-519.
Gruson, Adrien, Ribardière, Mickaël, Šik, Martin, Vorba, Jiří, Cozot, Rémi, Bouatouch, Kadi et Křivánek, Jaroslav.
2017.
« A spatial target function for Metropolis photon tracing ».
ACM Transactions on Graphics, vol. 36, nº 1.
Guerrouj, Latifa, Kermansaravi, Zeinab, Arnaoudouva, Venera, Fung, Benjamin C. M., Khomh, Foutse, Antoniol, Giuliano et Guéhéneuc, Yann-Gael.
2017.
« Investigating the relation between lexical smells and change- and fault-proneness: an empirical study ».
Software Quality Journal, vol. 25, nº 3.
pp. 641-670.
Guessoum, Djamel, Miraoui, Moeiz et Tadj, Chakib.
2017.
« Contextual case-based reasoning applied to a mobile device ».
International Journal of Pervasive Computing and Communications, vol. 13, nº 3.
pp. 282-299.
Guittard, Alexandre, Baraer, Michel, McKenzie, Jeffrey M., Mark, Bryan G., Wigmore, Oliver, Fernandez, Alfonso, Rapre, Alejo C., Walsh, Elizabeth, Bury, Jeffrey, Carey, Mark, French, Adam et Young, Kenneth R..
2017.
« Trace-metal contamination in the glacierized Rio Santa watershed, Peru ».
Environmental Monitoring and Assessment, vol. 189, nº 12.
Guizani, Lotfi, Chaallal, Omar et Mousavi, Seyed Sina.
2017.
« Local bond stress-slip model for reinforced concrete joints and anchorages with moderate confinement ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 44, nº 3.
pp. 201-211.
Gunderov, Dmitry, Churakova, Anna, Lukyanov, Aleksandr, Prokofiev, Egor, Pushin, Vladimir, Kreitcberg, Alena et Prokoshkin, Sergey.
2017.
« Features of the mechanical behavior of ultrafine-grained and nanostructured TiNi alloys ».
[Article de conférence]. Materials Today: Proceedings, vol. 4, nº 3, Part B.
pp. 4825-4829.
Guo, Meng, David, Éric, Fréchette, Michel et Demarquette, Nicole R..
2017.
« Polyethylene/polyhedral oligomeric silsesquioxanes composites: Dielectric, thermal and rheological properties ».
Polymer, vol. 115.
pp. 60-69.
Guo, Meng, Fréchette, Michel, David, Éric, Demarquette, Nicole R. et Daigle, Jean-Christophe.
2017.
« Polyethylene/polyhedral oligomeric silsesquioxanes composites: electrical insulation for high voltage power cables ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 24, nº 2.
pp. 798-807.
Hadjadj, Zineb, Cheriet, Mohamed, Meziane, Abdelkrim et Cherfa, Yazid.
2017.
« A new efficient binarization method: application to degraded historical document images ».
Signal, Image and Video Processing, vol. 11, nº 6.
pp. 1155-1162.
Hafemann, Luiz G., Sabourin, Robert et Oliveira, Luiz S..
2017.
« Learning features for offline handwritten signature verification using deep convolutional neural networks ».
Pattern Recognition, vol. 70.
pp. 163-176.
Haillot, Didier, Pincemin, Sandrine, Goetz, Vincent, Rousse, Daniel R. et Py, Xavier.
2017.
« Synthesis and characterization of multifunctional energy composite: Solar absorber and latent heat storage material of high thermal conductivity ».
Solar Energy Materials and Solar Cells, vol. 161.
pp. 270-277.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2017.
« Ecological optimization for forecasting production and maintenance problem based on carbon tax ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 5-8.
pp. 1595-1606.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2017.
« Improved preventive maintenance in the framework of forecasting problem under subcontractor constraint ».
International Journal of Production Research, vol. 55, nº 16.
pp. 4557-4600.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2017.
« Joint optimization of production and maintenance planning with an environmental impact study ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 1-4.
pp. 1269-1282.
Haj-Hassan, Hawraa, Chaddad, Ahmad, Harkouss, Youssef, Desrosiers, Christian, Toews, Matthew et Tanougast, Camel.
2017.
« Classifications of multispectral colorectal cancer tissues using convolution neural network ».
Journal of Pathology Informatics, vol. 8, nº 1.
Hamidi, Mohammadreza, Shahanaghi, Kamra, Jabbarzadeh, Armin, Jahani, Ehsan et Pousti, Zahra.
2017.
« Determining production level under uncertainty using fuzzy simulation and bootstrap technique, a case study ».
Journal of Industrial Engineering International, vol. 13, nº 4.
pp. 487-497.
Harker, Matthew et O'Leary, Paul.
2017.
« Approximation of physical measurement data by discrete orthogonal eigenfunctions of linear differential operators ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 41, nº 5.
pp. 804-824.
Harker, Matthew et O'Leary, Paul.
2017.
« Numerical solution of the anomalous diffusion equation in a rectangular domain via hypermatrix equations ».
[Article de conférence]. IFAC-PapersOnLine, vol. 50, nº 1.
pp. 9730-9735.
Harker, Matthew et O’Leary, Paul.
2017.
« Trapezoidal rule and its error analysis for the Grünwald-Letnikov operator ».
International Journal of Dynamics and Control, vol. 5, nº 1.
pp. 18-29.
Harris, Kyle, White, Don et Samson, Claire.
2017.
« Imaging the Aquistore reservoir after 36 kilotonnes of CO2 injection using distributed acoustic sensing ».
Geophysics, vol. 82, nº 6.
M81-M96.
Harris, Nathan, Shahriari, Davood et Jahazi, Mohammad.
2017.
« Development of a fast converging material specific void closure model during ingot forging ».
Journal of Manufacturing Processes, vol. 26.
pp. 131-141.
Hayajna, Tareq et Kadoch, Michel.
2017.
« Analysis and enhancements of HELLO based link failure detection in wireless mesh networks ».
Telecommunication Systems, vol. 66, nº 3.
pp. 393-407.
Hedrich, T., Pellegrino, G., Kobayashi, E., Lina, J. M. et Grova, C..
2017.
« Comparison of the spatial resolution of source imaging techniques in high-density EEG and MEG ».
NeuroImage, vol. 157.
pp. 531-544.
Helal, E., Amurin, L. G., Carastan, D. J., de Sousa Jr, R. R., David, E., Fréchette, M. et Demarquette, N. R..
2017.
« Interfacial molecular dynamics of styrenic block copolymer-based nanocomposites with controlled spatial distribution ».
Polymer, vol. 113.
pp. 9-26.
Helal, Emna, David, Eric, Fréchette, Michel et Demarquette, Nicole R..
2017.
« Thermoplastic elastomer nanocomposites with controlled nanoparticles dispersion for HV insulation systems: Correlation between rheological, thermal, electrical and dielectric properties ».
European Polymer Journal, vol. 94.
pp. 68-86.
Henderson, Andrew D., Asselin-Balençon, Anne C., Heller, Martin, Lessard, Lindsay, Vionnet, Samuel et Jolliet, Olivier.
2017.
« Spatial variability and uncertainty of water use impacts from U.S. Feed and milk production ».
Environmental Science and Technology, vol. 51, nº 4.
pp. 2382-2391.
Hesamodin Talebi, S., Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Melkonyan, Haikouhi.
2017.
« In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ».
Metals, vol. 7, nº 9.
Hfeda, Marwan, Marchand, Françoise et Dao, Thien-My.
2017.
« Optimization of milk-run delivery issue in lean supply chain management by genetic algorithm and hybridization of genetic algorithm with ant colony optimization: An automobile industry case study ».
Journal of Management and Engineering Integration, vol. 10, nº 2.
pp. 90-99.
Hlioui, Rached, Gharbi, Ali et Hajji, Adnene.
2017.
« Joint supplier selection, production and replenishment of an unreliable manufacturing-oriented supply chain ».
International Journal of Production Economics, vol. 187.
pp. 53-67.
Hof, Lucas A., Rahman, Md Masiar et Wuthrich, Rolf.
2017.
« Using Taylor vortices to create a film of nanoparticles for dip-coating ».
Manufacturing Letters, vol. 13.
pp. 21-24.
Hof, Lucas A. et Ziki, Jana Abou.
2017.
« Micro-hole drilling on glass substrates-A review ».
Micromachines, vol. 8, nº 2.
Hof, Lucas Abia, Guo, Xin, Seo, Minseok, Wuthrich, Rolf et Greener, Jesse.
2017.
« Glass imprint templates by spark assisted chemical engraving for microfabrication by hot embossing ».
Micromachines, vol. 8, nº 1.
Hojjat, Seyed-Parsa, Ayed, Ismail, Garvin, Gregory J. et Punithakumar, Kumaradevan.
2017.
« Spine labeling in MRI via regularized distribution matching ».
International Journal of Computer Assisted Radiology and Surgery, vol. 12, nº 11.
pp. 1911-1922.
Honarparvar, M., de la Rosa, J. M., Nabki, F. et Sawan, M..
2017.
« SMASH ΔΣ modulator with adderless feed-forward loop filter ».
Electronics Letters, vol. 53, nº 8.
pp. 532-534.
Hörning, Marcel, Blanchard, François, Isomura, Akihiro et Yoshikawa, Kenichi.
2017.
« Dynamics of spatiotemporal line defects and chaos control in complex excitable systems ».
Scientific Reports, vol. 7, nº 1.
Hu, Wei, Wang, Lin et Kaddoum, Georges.
2017.
« Design and performance analysis of a differentially spatial modulated chaos shift keying modulation system ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 64, nº 11.
pp. 1302-1306.
Hua, Binh-Son, Gruson, Adrien, Nowrouzezahrai, Derek et Hachisuka, Toshiya.
2017.
« Gradient-domain photon density estimation ».
Computer Graphics Forum, vol. 36, nº 2.
pp. 31-38.
Huang, Bin, Chen, Haoshuo, Fontaine, Nicolas K., Jin, Cang, Shang, Kuanping, Ryf, Roland, Essiambre, René-Jean, Ung, Bora, Massadeq, Younès, Larochelle, Sophie et Li, Guifang.
2017.
« Spatially and spectrally resolved gain characterization of space-division multiplexing amplifiers with coherent swept-wavelength reflectometry ».
Journal of Lightwave Technology, vol. 35, nº 4.
pp. 741-747.
Huang, Yanbo B., Ouellet-Plamondon, Claudiane M., Thomson, Steven J. et Reddy, Krishna N..
2017.
« Characterizing downwind drift deposition of aerially applied glyphosate using RbCl as tracer ».
International Journal of Agricultural and Biological Engineering, vol. 10, nº 3.
pp. 31-36.
Hwang, Byong jun, Ren, Jinchang, McCormack, Samuel, Berry, Craig, Ben Ayed, Ismail, Graber, Hans C. et Aptoula, Erchan.
2017.
« A practical algorithm for the retrieval of floe size distribution of Arctic sea ice from high-resolution satellite Synthetic Aperture Radar imagery ».
Elementa : Science of Anthropocene, vol. 5.
Ibarra-Zavaleta, Sara Patricia, Landgrave, Rosario, Romero-López, Rabindranarth, Poulin, Annie et Arango-Miranda, Raúl.
2017.
« Distributed hydrological modeling: Determination of theoretical hydraulic potential & streamflow simulation of extreme hydrometeorological events ».
Water, vol. 9, nº 8.
Ijaz, M. F., Dubinskiy, S., Zhukova, Y., Korobkova, A., Pustov, Y., Brailovski, V. et Prokoshkin, S..
2017.
« Novel electrochemical test bench for evaluating the functional fatigue life of biomedical alloys ».
The Journal of The Minerals, Metals & Materials Society, vol. 69, nº 8.
pp. 1334-1339.
Imaouchen, Yacine, Kedadouche, Mourad, Alkama, Rezak et Thomas, Marc.
2017.
« A Frequency-Weighted Energy Operator and complementary ensemble empirical mode decomposition for bearing fault detection ».
Mechanical Systems and Signal Processing, vol. 82.
pp. 103-116.
Iran, Hung, Kaddoum, Georges, Gagnon, François et Sibomana, Louis.
2017.
« Cognitive radio network with secrecy and interference constraints ».
Physical Communication, vol. 22.
pp. 32-41.
Isapour, Aria et Kouki, Ammar B..
2017.
« Empty LTCC integrated waveguide with compact transitions for ultra-low loss millimeter-wave applications ».
IEEE Microwave and Wireless Components Letters, vol. 27, nº 2.
pp. 144-146.
Issa, Mohamad, Dubé, Éric, Mobarra, Mohammadjavad, Fiset, Jean et Ilinca, Adrian.
2017.
« Modeling and optimization of the energy production based on eo-synchro application ».
Power Engineer, vol. 21, nº 4.
Jaafar, Mohamad Ali, Rousse, Daniel R., Gibout, Stéphane et Bédécarrats, Jean-Pierre.
2017.
« A review of dendritic growth during solidification: Mathematical modeling and numerical simulations ».
Renewable and Sustainable Energy Reviews, vol. 74.
pp. 1064-1079.
Jabbarzadeh, Armin, Fahimnia, Behnam et Sheu, Jiuh-Biing.
2017.
« An enhanced robustness approach for managing supply and demand uncertainties ».
International Journal of Production Economics, vol. 183.
pp. 620-631.
Jacquet, Sébastien, Le Bel, Célyn et Monfet, Danielle.
2017.
« In situ evaluation of thermostat setback scenarios for all-electric single-family houses in cold climate ».
Energy and Buildings, vol. 154.
pp. 538-544.
Jarndal, Anwar et Kouki, Ammar.
2017.
« Efficient modeling of GaN HEMTs for linear and nonlinear circuits design ».
International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, vol. 30, nº 1.
Javadi, Alireza, Hamadi, Abdelhamid, Ndtoungou, Auguste et Al-Haddad, Kamal.
2017.
« Power quality enhancement of smart households using a multilevel-thseaf with a PR controller ».
IEEE Transactions on Smart Grid, vol. 8, nº 1.
pp. 465-474.
Jayakumar, Kamala Ramasubramani et Abran, Alain.
2017.
« Estimation models for software functional test effort ».
Journal of Software Engineering and Applications, vol. 10, nº 4.
pp. 338-353.
Jbira, I., Tlija, M., Louhichi, B. et Tahan, A..
2017.
« CAD/Tolerancing integration: Mechanical assembly with form defects ».
Advances in Engineering Software, vol. 114.
pp. 312-324.
Jemai, Mohamed et Kouki, Ammar B..
2017.
« New adaptive multi-expansion frequencies approach for SP-MORe techniques with application to the well-conditioned asymptotic waveform evaluation ».
IEEE Transactions on Microwave Theory and Techniques, vol. 65, nº 10.
pp. 3709-3719.
Jenabi, Sarvenaz, Deslandes, Dominic, Boone, François et Charlebois, Serge A..
2017.
« A low-cost fabrication method for sub-millimeter wave GaAs Schottky diode ».
Semiconductor Science and Technology, vol. 32, nº 10.
Jenabi, Sarvenaz, Malekabadi, Ali, Deslandes, Dominic, Boone, François et Charlebois, Serge A..
2017.
« Submillimeter wave GaAs Schottky diode application based study and optimization for 0.1–1.5 THz ».
Solid-State Electronics, vol. 134.
pp. 65-73.
Jolicoeur, Pierre, Drisdelle, Brandi Lee et Lina, Jean-Marc.
2017.
« Dynamics of phase-locking value and phase-amplitude coupling related to visual-spatial attention ».
[Résumé d'une communication à une conférence]. Psychophysiology, vol. 54, nº S1.
S15-S15.
Jomaa, Walid, Lévesque, Julie, Bocher, Philippe, Divialle, Arnaud et Gakwaya, Augustin.
2017.
« Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 1-4.
pp. 931-942.
Jomaa, Walid, Mechri, Oussama, Levesque, Julie, Songmene, Victor, Bocher, Philippe et Gakwaya, Augustin.
2017.
« Finite element simulation and analysis of serrated chip formation during highspeed machining of AA7075T651 alloy ».
Journal of Manufacturing Processes, vol. 26.
pp. 446-458.
Jomaa, Walid, Songmene, Victor et Bocher, Philippe.
2017.
« Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals ».
Machining Science and Technology, vol. 21, nº 3.
pp. 335-361.
Jonas, John J., Aranas, Clodualdo, Fall, Ameth et Jahazi, Mohammad.
2017.
« Transformation softening in three titanium alloys ».
Materials & Design, vol. 113.
pp. 305-310.
Ka, Ibrahima, Gerlein, Luis Felipe, Nechache, Riad et Cloutier, Sylvain G..
2017.
« High-performance nanotube-enhanced perovskite photodetectors ».
Scientific Reports, vol. 7.
Kaddoum, Georges et Tadayon, Navid.
2017.
« Differential chaos shift keying: A robust modulation scheme for power-line communications ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 64, nº 1.
pp. 31-35.
Kaddoum, Georges, Tran, Ha-Vu, Kong, Long et Atallah, Micheal.
2017.
« Design of simultaneous wireless information and power transfer scheme for short reference DCSK communication systems ».
IEEE Transactions on Communications, vol. 65, nº 1.
pp. 431-443.
Kali, Yassine, Saad, Maarouf, Benjelloun, Khalid et Fatemi, Abdelilah.
2017.
« Discrete-time second order sliding mode with time delay control for uncertain robot manipulators ».
Robotics and Autonomous Systems, vol. 94.
pp. 53-60.
Kammegne, Michel Joël Tchatchueng, Botez, Ruxandra Mihaela, Grigorie, Lucian Teodor, Mamou, Mahmoud et Mébarki, Youssef.
2017.
« Proportional fuzzy feed-forward architecture control validation by wind tunnel tests of a morphing wing ».
Chinese Journal of Aeronautics, vol. 30, nº 2.
pp. 561-576.
Kanthabhabha Jeya, Palaniappan Rahul et Bouzid, Abdel-Hakim.
2017.
« Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ».
Advanced Materials proceeding, vol. 2, nº 10.
pp. 609-614.
Karganroudi, Sasan Sattarpanah, Cuillière, Jean-Christophe, François, Vincent et Tahan, Antoine Souheil.
2017.
« Assessment of the robustness of a fixtureless inspection method for non-rigid parts based on a verification and validation approach ».
Journal of Verification, Validation and Uncertainty Quantification, vol. 2, nº 4.
Kassem, Abdulrahman, Al-Haddad, Kamal et Komljenovic, Dragan.
2017.
« Concentrated solar thermal power in Saudi Arabia: Definition and simulation of alternative scenarios ».
Renewable and Sustainable Energy Reviews, vol. 80.
pp. 75-91.
Kaur, Kuljeet, Dhand, Tanya, Kumar, Neeraj et Zeadally, Sherali.
2017.
« Container-as-a-service at the edge: trade-off between energy efficiency and service availability at fog nano data centers ».
IEEE Wireless Communications, vol. 24, nº 3.
pp. 48-56.
Kaushal, Hemani et Kaddoum, Georges.
2017.
« Applications of lasers for tactical military operations ».
IEEE Access, vol. 5.
pp. 20736-20753.
Kaushal, Hemani et Kaddoum, Georges.
2017.
« Optical communication in space: Challenges and mitigation techniques ».
IEEE Communications Surveys and Tutorials, vol. 19, nº 1.
pp. 57-96.
Kaushal, Hemani, Kaddoum, Georges, Jain, ViranderKumar et Kar, Subrat.
2017.
« Experimental investigation of optimum beam size for FSO uplink ».
Optics Communications, vol. 400.
pp. 106-114.
Kazeminia, Mehdi et Bouzid, Hakim.
2017.
« Evaluation of leakage through graphite-based compression packing rings ».
Journal of Pressure Vessel Technology, vol. 139, nº 1.
Kedadouche, Mourad et Liu, Zhaoheng.
2017.
« Fault feature extraction and classification based on WPT and SVD: Application to element bearings with artificially created faults under variable conditions ».
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 231, nº 22.
pp. 4186-4196.
Kessentini, Marouane, Mansoor, Usman, Wimmer, Manuel, Ouni, Ali et Deb, Kalyanmoy.
2017.
« Search-based detection of model level changes ».
Empirical Software Engineering, vol. 22, nº 2.
pp. 670-715.
Khasawneh, Fawaz A. et Kadoch, Michel.
2017.
« Adaptive transmission rate congestion aware routing algorithm in wireless mesh network ».
Wireless Personal Communications, vol. 97, nº 3.
pp. 4327-4342.
Khettabi, Riad, Nouioua, Mourad, Djebara, Abdelhakim et Songmene, Victor.
2017.
« Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 5/8.
pp. 2593-2598.
Khou, J. C., Ghedhaïfi, W., Vancassel, X., Montreuil, E. et Garnier, F..
2017.
« CFD simulation of contrail formation in the near field of a commercial aircraft: Effect of fuel sulfur content ».
Meteorologische Zeitschrift, vol. 26, nº 6.
pp. 585-596.
Khreich, Wael, Khosravifar, Babak, Hamou-Lhadj, Abdelwahab et Talhi, Chamseddine.
2017.
« An anomaly detection system based on variable N-gram features and one-class SVM ».
Information and Software Technology, vol. 91.
pp. 186-197.
Kikinis, Z., Cho, K. I. K., Coman, I. L., Radoeva, P. D., Bouix, S., Tang, Y., Eckbo, R., Makris, N., Kwon, J. S., Kubicki, M., Antshel, K. M., Fremont, W., Shenton, M. E. et Kates, W. R..
2017.
« Abnormalities in brain white matter in adolescents with 22q11.2 deletion syndrome and psychotic symptoms ».
Brain Imaging and Behavior, vol. 11, nº 5.
pp. 1353-1364.
Kikinis, Z., Muehlmann, M., Pasternak, O., Peled, S., Kulkarni, P., Ferris, C., Bouix, S., Rathi, Y., Koerte, I. K., Pieper, S., Yarmarkovich, A., Porter, C. L., Kristal, B. S. et Shenton, M. E..
2017.
« Diffusion imaging of mild traumatic brain injury in the impact accelerated rodent model: A pilot study ».
Brain Injury, vol. 31, nº 10.
pp. 1376-1381.
Komijani, Hossein Rahimi, Shahin, Mahdi, Shahin, Mohammad bagher et Jabbarzadeh, Armin.
2017.
« Condition-based maintenance considering shock and degradation processes ».
Decision Science Letters, vol. 6, nº 2.
pp. 151-164.
Konopatsky, A. S., Dubinskiy, S. M., Zhukova, Yu S., Sheremetyev, V., Brailovski, V., Prokoshkin, S. D. et Filonov, M. R..
2017.
« Ternary Ti-Zr-Nb and quaternary Ti-Zr-Nb-Ta shape memory alloys for biomedical applications: Structural features and cyclic mechanical properties ».
Materials Science and Engineering: A, vol. 702.
pp. 301-311.
Konopatsky, A., Brailovski, V., Filonov, M., Dubinskiy, S., Zhukova, Y., Korotitskiy, A. et Prokoshkin, S..
2017.
« Manufacturing and characterization of novel Ti-Zr-Based shape memory alloys ».
[Article de conférence]. Materials Today: Proceedings, vol. 4, nº 3.
pp. 4856-4860.
Koreanschi, Andreea, Gabor, Oliviu Sugar, Acotto, Joran, Brianchon, Guillaume, Portier, Gregoire, Botez, Ruxandra Mihaela, Mamou, Mahmoud et Mebarki, Youssef.
2017.
« Optimization and design of an aircraft's morphing wing-tip demonstrator for drag reduction at low speeds, Part II - Experimental validation using Infra-Red transition measurement from Wind Tunnel tests ».
Chinese Journal of Aeronautics, vol. 30, nº 1.
pp. 164-174.
Koreanschi, Andreea, Sugar Gabor, Oliviu, Acotto, Joran, Brianchon, Guillaume, Portier, Gregoire, Botez, Ruxandra Mihaela, Mamou, Mahmoud et Mebarki, Youssef.
2017.
« Optimization and design of an aircraft’s morphing wing-tip demonstrator for drag reduction at low speed, Part I – Aerodynamic optimization using genetic, bee colony and gradient descent algorithms ».
Chinese Journal of Aeronautics, vol. 30, nº 1.
pp. 149-163.
Koulla Moulla, Donatien, Abran, Alain et Kolyang.
2017.
« An architecture for effort estimation of solutions based on Open Source ».
Annals of the Collegium of Economic Analysis, nº 43.
pp. 69-86.
Kreitcberg, A., Brailovski, V., Sheremetyev, V. et Prokoshkin, S..
2017.
« Effect of laser powder bed fusion parameters on the microstructure and texture development in superelastic Ti–18Zr–14Nb Alloy ».
Shape Memory and Superelasticity, vol. 3, nº 4.
pp. 361-372.
Kreitcberg, Alena, Brailovski, Vladimir et Turenne, Sylvain.
2017.
« Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion ».
Materials Science and Engineering: A, vol. 689.
pp. 1-10.
Kreitcberg, Alena, Brailovski, Vladimir et Turenne, Sylvain.
2017.
« Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion ».
Materials Science and Engineering: A, vol. 700.
pp. 540-553.
Kuester, Scheyla, Demarquette, Nicole R., Ferreira Jr, José Carlos, Soares, Bluma G. et Barra, Guilherme M. O..
2017.
« Hybrid nanocomposites of thermoplastic elastomer and carbon nanoadditives for electromagnetic shielding ».
European Polymer Journal, vol. 88.
pp. 328-339.
Kumar, Kuldeep, Desrosiers, Christian, Siddiqi, Kaleem, Colliot, Olivier et Toews, Matthew.
2017.
« Fiberprint: A subject fingerprint based on sparse code pooling for white matter fiber analysis ».
NeuroImage, vol. 158.
pp. 242-259.
Kumar, Shailendra, Hussain, Ikhlaq, Singh, Bhim, Chandra, Ambrish et Al Haddad, Kamal.
2017.
« An adaptive control scheme of SPV system integrated to AC distribution system ».
IEEE Transactions on Industry Applications, vol. 53, nº 6.
pp. 5173-5181.
Kurusu, Rafael S. et Demarquette, Nicole R..
2017.
« Surface properties evolution in electrospun polymer blends by segregation of hydrophilic or amphiphilic molecules ».
European Polymer Journal, vol. 89.
pp. 129-137.
Labbé, Jean-Philippe, Manneville, Thibault et Santos, Francisco.
2017.
« Hirsch polytopes with exponentially long combinatorial segments ».
Mathematical Programming, vol. 165, nº 2.
pp. 663-688.
Labbé, Jean-Philippe et Nevo, Eran.
2017.
« Bounds for entries of γ-vectors of flag homology spheres ».
SIAM Journal on Discrete Mathematics, vol. 31, nº 3.
pp. 2064-2078.
Labbio, G. D., Keshavarz-Motamed, Z. et Kadem, L..
2017.
« Numerical simulation of flows in a circular pipe transversely subjected to a localized impulsive body force with applications to blunt traumatic aortic rupture ».
Fluid Dynamics Research, vol. 49, nº 3.
Lachance-Tremblay, Eric, Perraton, Daniel, Vaillancourt, Michel et Di Benedetto, Herve.
2017.
« Degradation of asphalt mixtures with glass aggregates subjected to freeze-thaw cycles ».
Cold Regions Science and Technology, vol. 141.
pp. 8-15.
Lachaud, Jacques-Olivier, Provençal, Xavier et Roussillon, Tristan.
2017.
« Two plane-probing algorithms for the computation of the normal vector to a digital plane ».
Journal of Mathematical Imaging and Vision, vol. 59, nº 1.
pp. 23-39.
Lagnika, S. B. Mondoukpe, Hausler, Robert et Glaus, Mathias.
2017.
« Modeling or dynamic simulation: a tool for environmental management in mining? ».
Journal of Integrative Environmental Sciences, vol. 14, nº 1.
pp. 19-37.
Lakani, Sara et Gagnon, François.
2017.
« Optimal design and energy efficient binary resource allocation of interference-limited cellular relay-aided systems with consideration of queue stability ».
IEEE Access, vol. 5.
pp. 8459-8474.
Lalonde, Sébastien, Guilbault, Raynald et Langlois, Sébastien.
2017.
« Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part II: Application to wind-induced vibration and fatigue analysis of overhead conductors ».
International Journal of Mechanical Sciences, vol. 126.
pp. 297-307.
Lalonde, Sébastien, Guilbault, Raynald et Légeron, Frédéric.
2017.
« Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part I: Model formulation and validation ».
International Journal of Mechanical Sciences, vol. 126.
pp. 281-296.
Lamarche, Louis.
2017.
« G-function generation using a piecewise-linear profile applied to ground heat exchangers ».
International Journal of Heat and Mass Transfer, vol. 115, nº Part. B.
pp. 354-360.
Lamarche, Louis.
2017.
« Mixed arrangement of multiple input-output borehole systems ».
Applied Thermal Engineering, vol. 124.
pp. 466-476.
Lamarre, Simon G., Demers, Vincent et Chatelain, Jean-François.
2017.
« Low-pressure powder injection molding using an innovative injection press concept ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8.
pp. 2595-2605.
Lamothe, Sébastien, Perraton, Daniel et Benedetto, Hervé Di.
2017.
« Degradation of hot mix asphalt samples subjected to freeze-thaw cycles and partially saturated with water or brine ».
Road Materials and Pavement Design, vol. 18, nº 4.
pp. 849-864.
Landau, Kurt, Nadeau, Sylvie, Le Floch, Tiphaine et Morency, François.
2017.
« Ergonomic time and motion studies of aircraft de-icing work ».
Journal of Ergonomics, vol. 7, nº 4.
Lapalme, Denis, Lemaire, Romain et Seers, Patrice.
2017.
« Assessment of the method for calculating the Lewis number of H2/CO/CH4 mixtures and comparison with experimental results ».
International Journal of Hydrogen Energy, vol. 42, nº 12.
pp. 8314-8328.
Lapalme, James.
2017.
« Organizations (and organizing) are a technology that humans know very little about ».
Organizational Design and Enterprise Engineering, vol. 1, nº 1.
pp. 27-31.
Lapointe, Mathieu et Barbeau, Benoit.
2017.
« Dual starch–polyacrylamide polymer system for improved flocculation ».
Water Research, vol. 124.
pp. 202-209.
Lapointe, Mathieu, Brosseau, Catherine, Comeau, Yves et Barbeau, Benoit.
2017.
« Assessing alternative media for ballasted flocculation ».
Journal of Environmental Engineering, vol. 143, nº 11.
Laporte, Claude Y. et O'Connor, Rory V..
2017.
« Software process improvement standards and guides for very small organizations an overview of eight implementations ».
CrossTalk : The Journal of Defense Software Engineering, vol. 30, nº 3.
pp. 23-27.
Léger, Étienne, Drouin, Simon, Collins, D. Louis, Popa, Tiberiu et Kersten-Oertel, Marta.
2017.
« Quantifying attention shifts in augmented reality image-guided neurosurgery ».
Healthcare Technology Letters, vol. 4, nº 5.
pp. 188-192.
Lehoux, P., Williams-Jones, B., Grimard, D. et Proulx, S..
2017.
« Technologies of the self in public health: insights from public deliberations on cognitive and behavioural enhancement ».
Critical Public Health, vol. 27, nº 3.
pp. 373-383.
Leite, Marcela de Souza, Santos, Stephanie Conceiçao, da Silva, Adriano Maniçoba et de Paula Ferreira, William.
2017.
« Eficácia da heurística da utilização incremental para balanceamento de linha: estudo de caso em um processo de tratamento de superfície ».
Revista Produção Online, vol. 17, nº 3.
Lemaire, R. et Menanteau, S..
2017.
« Assessment of radiation correction methods for bare bead thermocouples in a combustion environment ».
International Journal of Thermal Sciences, vol. 122.
pp. 186-200.
Lemaire, Romain, Menage, Delphine et Seers, Patrice.
2017.
« Study of the high heating rate devolatilization of bituminous and subbituminous coals-Comparison of experimentally monitored devolatilization profiles with predictions issued from single rate, two-competing rate, distributed activation energy and chemical percolation devolatilization models ».
Journal of Analytical and Applied Pyrolysis, vol. 123.
pp. 255-268.
Lemieux, Pierre-Olivier, Barre, Arnaud, Hagemeister, Nicola et Aissaoui, Rachid.
2017.
« Degrees of freedom coupling adapted to the upper limb of a digital human model ».
International Journal of Human Factors Modelling and Simulation, vol. 5, nº 4.
pp. 314-337.
Lemieux, Pierre-Olivier, Cresson, Thierry et Aissaoui, Rachid.
2017.
« Simultaneous estimation of the path, magnitude and orientation of the femorotibial contact forces using bone geometry constraints: an exploratory numerical study for the stance phase of gait ».
Multibody System Dynamics, vol. 41, nº 1.
pp. 25-45.
Letenneur, Morgan, Brailovski, Vladimir, Kreitcberg, Alena, Paserin, Vladimir et Bailon-Poujol, Ian.
2017.
« Laser powder bed fusion of water-atomized iron-based powders: process optimization ».
Journal of Manufacturing and Materials Processing, vol. 1, nº 2.
Levasseur, Annie, Bahn, Olivier, Beloin-Saint-Pierre, Didier, Marinova, Mariya et Vaillancourt, Kathleen.
2017.
« Assessing butanol from integrated forest biorefinery: A combined techno-economic and life cycle approach ».
Applied Energy, vol. 198.
pp. 440-452.
Li, Jia, Song, Yujiang, Zhang, Gaixia, Liu, Huaiju, Wang, Yiren, Sun, Shuhui et Guo, Xinwen.
2017.
« Pyrolysis of self-assembled iron porphyrin on carbon black as core/shell structured electrocatalysts for highly efficient oxygen reduction in both alkaline and acidic medium ».
Advanced Functional Materials, vol. 27, nº 3.
Li, Wenchao, Vu, Viet-Hung, Liu, Zhaoheng, Thomas, Marc et Hazel, Bruce.
2017.
« Application of adaptable functional series vector time-dependent autoregressive model for extraction of real modal parameters for identification of time-varying systems ».
Measurement: Journal of the International Measurement Confederation, vol. 103.
pp. 143-156.
Linsbauer, Lukas, Lopez-Herrejon, Roberto Erick et Egyed, Alexander.
2017.
« Variability extraction and modeling for product variants ».
Software and Systems Modeling, vol. 16, nº 4.
pp. 1179-1199.
Lopez-Martin, Cuauhtemoc, Nassif, Ali Bou et Abran, Alain.
2017.
« A training process for improving the quality of software projects developed by a practitioner ».
Journal of Systems and Software, vol. 131.
pp. 98-111.
Louafi, Habib, Coulombe, Stéphane et Cheriet, Mohamed.
2017.
« Multi-objective optimization in dynamic content adaptation of slide documents ».
IEEE Transactions on Services Computing, vol. 10, nº 2.
pp. 231-243.
Luk-Cyr, Jacques, El-Bawab, Rayan, Champliaud, Henri, Lanteigne, Jacques et Vadean, Aurelian.
2017.
« Sequential approximate optimization of industrial hammer peening using finite element simulations ».
Structural and Multidisciplinary Optimization, vol. 55, nº 3.
pp. 767-778.
Luk-Cyr, Jacques, Paquet, Daniel, Lanteigne, Jacques, Champliaud, Henri et Vadean, Aurelian.
2017.
« A unified plasticity methodology for rate- and temperature-sensitive alloys exhibiting a non-linear kinematic hardening behavior ».
Acta Mechanica Solida Sinica, vol. 30, nº 1.
pp. 27-37.
Luong, Phuong, Gagnon, François, Despins, Charles et Tran, Le-Nam.
2017.
« Optimal joint remote radio head selection and beamforming design for limited fronthaul C-RAN ».
IEEE Transactions on Signal Processing, vol. 65, nº 21.
pp. 5605-5620.
Madani, Amin, Gallix, Benoit, Pugh, Carla M, Azagury, Dan, Bradley, Paul, Fowler, Dennis, Hannaford, Blake, Macdonald, Sumaira, Miyasaka, Kiyoyuki, Nuño, Natalia, Szold, Amir, Verter, Vedat et Aggarwal, Rajesh.
2017.
« Evaluating the role of simulation in healthcare innovation: recommendations of the Simnovate Medical Technologies Domain Group ».
BMJ Simulation and Technology Enhanced Learning, vol. 3, nº Suppl 1.
S8-S14.
Maheux, Manon, Bisaillon-Sicotte, Étienne, Tabrizi, Shirin, Armony, Jorge L., Lina, Jean-Marc et Jolicoeur, Pierre.
2017.
« Optimal measurements of hemodynamic response latency in fNIRS using the jackknife approach ».
Psychophysiology, vol. 54, nº 1.
pp. 62-73.
Mahvash Mohammadi, Hossein et de Guise, Jacques A..
2017.
« Enhanced X-ray image segmentation method using prior shape ».
IET Computer Vision, vol. 11, nº 2.
pp. 145-152.
Mansur Rodrigues Filho, Jorge Franklin, Tremblay, Nicolas, Gláucio, Soares da Fonseca et Belanger, Pierre.
2017.
« The feasibility of structural health monitoring using the fundamental shear horizontal guided wave in a thin aluminum plate ».
Materials, vol. 10, nº 5.
Marani, Mohsen, Songmene, Victor et Maher, Ibrahem.
2017.
« Investigation on surface finish and tool condition while turning AL20Mg2Si metal matrix composite ».
International Journal of Advances in Science, Engineering and Technology, vol. 5, nº 3, Supp. 1.
pp. 11-14.
Mark, Bryan G., French, Adam, Baraer, Michel, Carey, Mark, Bury, Jeffrey, Young, Kenneth R., Polk, Molly H., Wigmore, Oliver, Lagos, Pablo, Crumley, Ryan, McKenzie, Jeffrey M. et Lautz, Laura.
2017.
« Glacier loss and hydro-social risks in the Peruvian Andes ».
Global and Planetary Change, vol. 159.
pp. 61-76.
Martel, Jean-Luc, Demeester, Kenjy, Brissette, François, Poulin, Annie et Arsenault, Richard.
2017.
« HMETS-A simple and efficient hydrology model for teaching hydrological modelling, flow forecasting and climate change impacts ».
International Journal of Engineering Education, vol. 33, nº 4.
pp. 1307-1316.
Masoumi, F., Shahriari, D., Jahazi, M., Cormier, J. et Flipo, B. C. D..
2017.
« On the occurrence of liquation during linear friction welding of Ni-based superalloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48A, nº 6.
pp. 2886-2899.
Mathlouthi, Yosra, Mitiche, Amar et Ben Ayed, Ismail.
2017.
« Regularised differentiation for image derivatives ».
IET Image Processing, vol. 11, nº 5.
pp. 310-316.
Mazyan, W. I., Ahmadi, A., Ahmed, H. et Hoorfar, M..
2017.
« Enhancement of solid particle separation efficiency in gas cyclones using electro-hydrodynamic method ».
Separation and Purification Technology, vol. 182.
pp. 29-35.
Mazyan, W. I., Ahmadi, A., Ahmed, H. et Hoorfar, M..
2017.
« Increasing efficiency of natural gas cyclones through addition of tangential chambers ».
Journal of Aerosol Science, vol. 110.
pp. 36-42.
McMeekin, Kevin, Sirois, Frédéric, Tousignant, Maxime et Bocher, Philippe.
2017.
« Improving the accuracy of time-harmonic FE simulations in induction heating applications Towards better ferromagnetic material models ».
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 36, nº 2.
pp. 526-534.
Mei, Shuyan, Karimnezhad, Ali, Forest, Marie, Bickel, David R. et Greenwood, Celia M. T..
2017.
« The performance of a new local false discovery rate method on tests of association between coronary artery disease (CAD) and genome-wide genetic variants ».
PLoS ONE, vol. 12, nº 9.
Meimandi, Shilan, Vanderesse, Nicolas, Thibault, Denis, Bocher, Philippe et Viens, Martin.
2017.
« Macro-defects characterization in cast CA-6NM martensitic stainless steel ».
Materials Characterization, vol. 124.
pp. 31-39.
Ménard, Jérémie, Léger-St-Jean, Benjamin, Balg, Frédéric, Petit, Yvan, Beauchamp, Marc et Rouleau, Dominique M..
2017.
« Suture bridge transosseous equivalent repair is stronger than transosseous tied braided-tape ».
Journal of Orthopaedic Science, vol. 22, nº 6.
pp. 1120-1125.
Mendoza-Sanchez, Rodrigo, Corless, Victoria B., Nguyen, Q. Nhu N., Bergeron-Brlek, Milan, Frost, John, Adachi, Shinya, Tantillo, Dean J. et Yudin, Andrei K..
2017.
« Cyclols revisited: Facile synthesis of medium-sized cyclic peptides ».
Chemistry - A European Journal, vol. 23, nº 54.
pp. 13319-13322.
Mezghani, Neila, Billard, Delphine, Ouakrim, Youssef, Fuentes, Alexandre, Hagemeister, Nicola et de Guise, Jacques A.
2017.
« Biomechanical analysis to characterize the impact of knee osteoarthritis on hip, knee, and ankle kinematics ».
Journal of Biomedical Engineering and Informatics, vol. 3, nº 2.
pp. 36-42.
Mezghani, Neila, Ouakrim, Youssef, Fuentes, Alexandre, Mitiche, Amar, Hagemeister, Nicola, Vendittoli, Pascal-André et de Guise, Jacques A..
2017.
« Mechanical biomarkers of medial compartment knee osteoarthritis diagnosis and severity grading: Discovery phase ».
Journal of Biomechanics, vol. 52.
pp. 106-112.
M’hiri, Faten, Duong, Luc, Desrosiers, Christian, Dahdah, Nagib, Miró, Joaquim et Cheriet, Mohamed.
2017.
« Automatic evaluation of vessel diameter variation from 2D X-ray angiography ».
International Journal of Computer Assisted Radiology and Surgery, vol. 12, nº 11.
pp. 1867-1876.
Mikhail, Amanda, Kadem, Lyes et Di Labbio, Giuseppe.
2017.
« Proper orthogonal decomposition and dynamic mode decomposition in the right ventricle after repair of Tetralogy of Fallot ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 62, nº 14.
p. 378.
Mirakhorli, F., Cao, X., Pham, X. T., Wanjara, P. et Fihey, J. L..
2017.
« Phase structures and morphologies of tempered CA6NM stainless steel welded by hybrid laser-arc process ».
Materials Characterization, vol. 123.
pp. 264-274.
Mokhbi, Said, Assaf, Gabriel J. et Yacef, Naima.
2017.
« Évolution des propriétés physiques des abrasifs routiers exposés à un cycle hivernal et perspectives de leur réutilisation ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 44, nº 4.
pp. 286-297.
Mondal, S., Wei, Q., Ding, W. J., Hafez, H. A., Fareed, M. A., Laramée, A., Ropagnol, X., Zhang, G., Sun, S., Sheng, Z. M., Zhang, J. et Ozaki, T..
2017.
« Aligned copper nanorod arrays for highly efficient generation of intense ultra-broadband THz pulses ».
Scientific Reports, vol. 7.
Mondal, Sanjoy, Ghommam, Jawhar et Saad, Maarouf.
2017.
« An adaptive full order sliding mode controller for mismatched uncertain systems ».
International Journal of Automation and Computing, vol. 14, nº 2.
pp. 191-201.
Montagne, Romain, Hertz, Alain et Gagnon, François.
2017.
« A multi-cell graph based dynamic resource allocation scheme for multi-user wireless networks ».
AEU - International Journal of Electronics and Communications, vol. 76.
pp. 60-70.
Moosavi-Khoonsari, Elmira, Jalilian, Farzad, Paray, Florence, Emadi, Daryoush et Drew, Robin A. L..
2017.
« Wettability behavior of Zinc-Based Alloys on cast iron ».
Metallography, Microstructure, and Analysis, vol. 6, nº 3.
pp. 221-232.
Moosavi-Khoonsari, Elmira et Jung, In-Ho.
2017.
« Critical evaluation and thermodynamic optimization of the Na2O–FeO–Fe2O3–Al2O3–SiO2 system ».
Journal of the European Ceramic Society, vol. 37, nº 2.
pp. 787-800.
Morattab, Arvin, Akhrif, Ouassima et Saad, Maarouf.
2017.
« Decentralised coordinated secondary voltage control of multi-area power grids using model predictive control ».
IET Generation, Transmission and Distribution, vol. 11, nº 18.
pp. 4546-4555.
Moret, Maxime, Delecourt, Alexandre, Moustapha, Hany, Abenhaim, Acher-Igal et Garnier, Francois.
2017.
« Automated thermal and stress preliminary analyses applied to a turbine rotor ».
Aerospace Science and Technology, vol. 63.
pp. 123-131.
Mostafa, Ahmad, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2017.
« Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ».
Metals, vol. 7, nº 6.
Motamedi, Ali, Wang, Zhe, Yabuki, Nobuyoshi, Fukuda, Tomohiro et Michikawa, Takashi.
2017.
« Signage visibility analysis and optimization system using BIM-enabled virtual reality (VR) environments ».
Advanced Engineering Informatics, vol. 32.
pp. 248-262.
Motamedi, M. Reza, Florant, David et Duchaine, Vincent.
2017.
« Comparing the exteroceptive feedback of normal stress, skin stretch, and vibrotactile stimulation for restitution of static events ».
Frontiers in Robotics and AI, vol. 4.
Motamedi, M. Reza, Roberge, Jean-Philippe et Duchaine, Vincent.
2017.
« The Use of vibrotactile feedback to restore texture recognition capabilities, and the effect of subject training ».
IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 25, nº 8.
pp. 1230-1239.
Motapon, Souleman Njoya, Lupien-Bedard, Alexandre, Dessaint, Louis-A., Fortin-Blanchette, Handy et Al-Haddad, Kamal.
2017.
« A Generic electrothermal li-ion battery model for rapid evaluation of cell temperature temporal evolution ».
IEEE Transactions on Industrial Electronics, vol. 64, nº 2.
pp. 998-1008.
Mousavi G, S. M., Faraji, Faramarz, Majazi, Abbas et Al Haddad, Kamal.
2017.
« A comprehensive review of flywheel energy storage system technology ».
Renewable and Sustainable Energy Reviews, vol. 67.
pp. 477-490.
Mundy, Erin, Gleeson, Tom, Roberts, Mark, Baraer, Michel et McKenzie, Jeffrey M..
2017.
« Thermal imagery of groundwater seeps: Possibilities and limitations ».
Groundwater, vol. 55, nº 2.
pp. 160-170.
Muñoz-Villamizar, Andrés, Montoya-Torres, Jairo R. et Faulin, Javier.
2017.
« Impact of the use of electric vehicles in collaborative urban transport networks: A case study ».
Transportation Research Part D: Transport and Environment, vol. 50.
pp. 40-54.
Murrieta-Mendoza, Alejandro, Beuze, Bruce, Ternisien, Laurane et Botez, Ruxandra Mihaela.
2017.
« New reference trajectory optimization algorithm for a flight management system inspired in beam search ».
Chinese Journal of Aeronautics, vol. 30, nº 4.
pp. 1459-1472.
Murrieta-Mendoza, Alejandro, Hamy, Antoine et Botez, Ruxandra Mihaela.
2017.
« Four- and three-dimensional aircraft reference trajectory optimization inspired by ant colony optimization ».
Journal of Aerospace Information Systems, vol. 14, nº 11.
pp. 597-616.
Naboulsi, Diala et Fiore, Marco.
2017.
« Characterizing the instantaneous connectivity of large-scale urban vehicular networks ».
IEEE Transactions on Mobile Computing, vol. 16, nº 5.
pp. 1272-1286.
Nadeau, Sylvie.
2017.
« Lean, Six Sigma and Lean Six Sigma in higher education: a review of experiences around the world ».
American Journal of Industrial and Business Management, vol. 7, nº 5.
pp. 591-603.
Nadeau, Sylvie et Landau, Kurt.
2017.
« Industrie 4.0 : Êtes-vous prêts (es)? ».
Travail et Santé, vol. 33, nº 2.
p. 30.
Nadeau, Sylvie et Landau, Kurt.
2017.
« Towards dynamic and adaptive allocation of staff in a digital-organised production context: an innovative perspective from work science ».
Journal of Ergonomics, vol. 7, nº 4.
Nadeau, Sylvie et Morency, François.
2017.
« De-icing of aircraft : incorporating business risks and occupational health and safety ».
International Journal of Safety and Security Engineering, vol. 7, nº 2.
pp. 247-266.
Nadembega, Apollinaire, Brisebois, Ronald, Abran, Alain et N'techobo, Philippe.
2017.
« Text and data mining & machine learning models to build an assisted literature review with relevant papers ».
International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), vol. 3, nº 1.
Nadjaran Toosi, Adel, Qu, Chenhao, Dias de Assuncao, Marcos et Buyya, Rajkumar.
2017.
« Renewable-aware geographical load balancing of web applications for sustainable data centers ».
Journal of Network and Computer Applications, vol. 83.
pp. 155-168.
Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick, Lina, Jean-Marc et Voix, Jérémie.
2017.
« Design considerations for robust noise rejection in otoacoustic emissions measured in-field using adaptive filtering ».
Acta Acustica United with Acustica, vol. 103, nº 2.
pp. 299-310.
Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick et Voix, Jérémie.
2017.
« Field monitoring of otoacoustic emissions during noise exposure: Pilot study in controlled environment ».
American Journal of Audiology, vol. 26, nº 3.
pp. 352-368.
Nadon, Vincent et Voix, Jérémie.
2017.
« Real-time estimation of the passive attenuation for otoacoustic emission measurement probes ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 141, nº 5.
p. 3732.
Nafchi, Hossein Ziaei, Shahkolaei, Atena, Hedjam, Rachid et Cheriet, Mohamed.
2017.
« CorrC2G: Color to gray conversion by correlation ».
IEEE Signal Processing Letters, vol. 24, nº 11.
pp. 1651-1655.
Nastev, Miroslav, Nollet, Marie-José, Abo El Ezz, Ahmad, Smirnoff, Alex, Ploeger, Sarah Kate, McGrath, Heather, Sawada, Michael, Stefanakis, Emmanuel et Parent, Michel.
2017.
« Methods and tools for natural hazard risk analysis in eastern canada: using knowledge to understand vulnerability and implement mitigation measures ».
Natural Hazards Review, vol. 18, nº 1.
Natephra, Worawan, Motamedi, Ali, Fukuda, Tomohiro et Yabuki, Nobuyoshi.
2017.
« Integrating building information modeling and virtual reality development engines for building indoor lighting design ».
Visualization in Engineering, vol. 5, nº 1.
p. 19.
Natephra, Worawan, Motamedi, Ali, Yabuki, Nobuyoshi et Fukuda, Tomohiro.
2017.
« Integrating 4D thermal information with BIM for building envelope thermal performance analysis and thermal comfort evaluation in naturally ventilated environments ».
Building and Environment, vol. 124.
pp. 194-208.
Navarro-Pardo, F., Benetti, D., Benavides, J., Zhao, H. G., Cloutier, S. G., Castano, V. M., Vomiero, A. et Rosei, F..
2017.
« Nanofiber-structured TiO2 nanocrystals as a scattering layer in dye-sensitized solar cells ».
ECS Journal of Solid State Science and Technology, vol. 6, nº 4.
N32-N37.
Navidi, Neda et Landry, René Jr.
2017.
« Location detection of vehicular accident using global navigation satellite systems/inertial measurement units navigator ».
[Article de conférence]. International Journal of Electrical and Information Engineering, vol. 11, nº 8.
pp. 938-945.
Navidi, Neda et Landry, René Jr..
2017.
« Collision vehicle detection system based on GPS/INS integration ».
Journal of Computer and Communications, vol. 5, nº 2.
pp. 48-70.
Nazarenko, Yevgen, Fournier, Sébastien, Kurien, Uday, Rangel-Alvarado, Rodrigo Benjamin, Nepotchatykh, Oleg, Seers, Patrice et Ariya, Parisa A..
2017.
« Role of snow in the fate of gaseous and particulate exhaust pollutants from gasoline-powered vehicles ».
Environmental Pollution, vol. 223.
pp. 665-675.
N'Diaye, J., Poorahong, S., Hmam, O., Izquierdo, R. et Siaj, M..
2017.
« Facile synthesis rhodium nanoparticles decorated single layer graphene as an enhancement hydrogen peroxide sensor ».
Journal of Electroanalytical Chemistry, vol. 789.
pp. 85-91.
Ndoye, Majid, Kerroum, Issam, Deslandes, Dominic et Domingue, Frédéric.
2017.
« Air-filled substrate integrated cavity resonator for humidity sensing ».
Sensors and Actuators, B: Chemical, vol. 252.
pp. 951-955.
Nerguizian, V., Alazzam, A., Stiharu, I. et Burnier Jr., M..
2017.
« Characterization of several cancer cell lines at microwave frequencies ».
Measurement: Journal of the International Measurement Confederation, vol. 109.
pp. 354-358.
Ngô, Valérie Tuyêt Mai, Nadeau, Sylvie et Hallé, Stéphane.
2017.
« Ergonomic design of a cooling vest in deep and ultra-deep mining environments ».
Occupational Ergonomics, vol. 13, nº S1.
pp. 115-126.
Nguyen duc, Huy, Kamwa, Innocent, Dessaint, Louis- A. et Cao-Duc, Huy.
2017.
« A novel approach for early detection of impending voltage collapse events based on the support vector machine ».
International Transactions on Electrical Energy Systems, vol. 27, nº 9.
Nguyen, Thi Hong Dang et Dao, Thien-My.
2017.
« New strategy to optimize lean supply chain design by meta-heuristic ».
American Journal of Engineering and Applied Sciences, vol. 10, nº 1.
pp. 156-164.
Nguyen, Tung Ngoc, Blanchette, Handy Fortin et Wang, Ruxi.
2017.
« An accurate modeling approach to compute noise transfer gain in complex low power plane geometries of power converters ».
Journal of Power Electronics, vol. 17, nº 2.
pp. 411-421.
Niknam, Seyed Ali, Balazinski, Marek et Songmene, Victor.
2017.
« To characterize and optimize the surface quality attributes in slot milling operation ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 1-4.
pp. 727-746.
Niknam, Seyed Ali et Songmene, Victor.
2017.
« Burr formation and correlation with cutting force and acoustic emission signals ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 231, nº 3.
pp. 399-414.
Nisol, Bernard, Watson, Sean, Lerouge, Sophie et Wertheimer, Michael R..
2017.
« Energetics of reactions in a dielectric barrier discharge with argon carrier gas: V hydrocarbons ».
Plasma Processes and Polymers, vol. 14, nº 8.
Nogning, Florent Lado et Gardoni, Mickaël.
2017.
« Double performance prism: Innovation performance measurement systems for manufacturing SMEs ».
International Journal of Innovative Research in Advanced Engineering, vol. 4, nº 03.
pp. 113-128.
Nooruzzaman, Md, Alloune, Nabih, Tremblay, Christine, Littlewood, Paul et Belanger, Michel P..
2017.
« Resource savings in submarine networks using agility of filterless architectures ».
IEEE Communications Letters, vol. 21, nº 3.
pp. 512-515.
Obaidat, Ala' T., Abo El Ezz, Ahmad et Galal, Khaled.
2017.
« Compression behavior of confined concrete masonry boundary elements ».
Engineering Structures, vol. 132.
pp. 562-575.
Oestreich, L. K. L., Lyall, A. E., Pasternak, O., Kikinis, Z., Newell, D. T., Savadjiev, P., Bouix, S., Shenton, M. E., Kubicki, M., Whitford, T. J. et McCarthy-Jones, S..
2017.
« Characterizing white matter changes in chronic schizophrenia: A free-water imaging multi-site study ».
Schizophrenia Research, vol. 189.
pp. 153-161.
Ohtani, T., Nestor, P. G., Bouix, S., Newell, D., Melonakos, E. D., McCarley, R. W., Shenton, M. E. et Kubicki, M..
2017.
« Exploring the neural substrates of attentional control and human intelligence: Diffusion tensor imaging of prefrontal white matter tractography in healthy cognition ».
Neuroscience, vol. 341.
pp. 52-60.
Oliveira, Dayvid V. R., Cavalcanti, George D. C. et Sabourin, Robert.
2017.
« Online pruning of base classifiers for Dynamic Ensemble Selection ».
Pattern Recognition, vol. 72.
pp. 44-58.
Oliveira, I. M. D., da Paz, C. C., da Silva, A. M. et de Paula Ferreira, W..
2017.
« Balanceamento de linha e arranjo físico: estudo de caso em uma linha de produção de cabines para máquinas de construção ».
Exacta, vol. 15, nº 1.
pp. 101-110.
Olszewski, Amy K., Kikinis, Zora, Gonzalez, Christie S., Coman, Ioana L., Makris, Nikolaos, Gong, Xue, Rathi, Yogesh, Zhu, Anni, Antshel, Kevin M., Fremont, Wanda, Kubicki, Marek R., Bouix, Sylvain, Shenton, Martha E. et Kates, Wendy R..
2017.
« The social brain network in 22q11.2 deletion syndrome: A diffusion tensor imaging study ».
Behavioral and Brain Functions, vol. 13, nº 1.
Ouanouki, R., April, A., Abran, A., Gomez, A. et Desharnais, J. M..
2017.
« Toward building RDB to HBase conversion rules ».
Journal of Big Data, vol. 4, nº 1.
Ouaret, Samir, Kenné, Jean-Pierre, Gharbi, Ali et Polotski, Vladimir.
2017.
« Age-dependent production and replacement strategies in failure-prone manufacturing systems ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 231, nº 3.
pp. 540-554.
Ouni, Ali, Kessentini, Marouane, Inoue, Katsuro et Ó Cinnéide, Mel.
2017.
« Search-based web service antipatterns detection ».
IEEE Transactions on Services Computing, vol. 10, nº 4.
pp. 603-617.
Ouni, Ali, Kessentini, Marouane, Ó Cinnéide, Mel, Sahraoui, Houari, Deb, Kalyanmoy et Inoue, Katsuro.
2017.
« MORE: A multi-objective refactoring recommendation approach to introducing design patterns and fixing code smells ».
Journal of Software: Evolution and Process, vol. 29, nº 5.
Ouni, Ali, Kula, Raula Gaikovina, Kessentini, Marouane, Ishio, Takashi, German, Daniel M. et Inoue, Katsuro.
2017.
« Search-based software library recommendation using multi-objective optimization ».
Information and Software Technology, vol. 83.
pp. 55-75.
Padois, Thomas, Doutres, Olivier, Sgard, Franck et Berry, Alain.
2017.
« Time domain localization technique with sparsity constraint for imaging acoustic sources ».
Mechanical Systems and Signal Processing, vol. 94.
pp. 85-93.
Padois, Thomas, Sgard, Franck, Doutres, Olivier et Berry, Alain.
2017.
« Acoustic source localization using a polyhedral microphone array and an improved generalized cross-correlation technique ».
Journal of Sound and Vibration, vol. 386.
pp. 82-99.
Paknahad, Mohammad, Ahmadi, Ali, Rousseau, Jacques, Nejad, Hojatollah Rezaei et Hoorfar, Mina.
2017.
« On-chip electronic nose for wine tasting: A digital microfluidic approach ».
IEEE Sensors Journal, vol. 17, nº 14.
pp. 4322-4329.
Paknahad, Mohammad, Bachhal, Jannat Singh, Ahmadi, Ali et Hoorfar, Mina.
2017.
« Characterization of channel coating and dimensions of microfluidic-based gas detectors ».
Sensors and Actuators, B: Chemical, vol. 241.
pp. 55-64.
Palma, Francis, Gonzalez-Huerta, Javier, Founi, Mohamed, Moha, Naouel, Tremblay, Guy et Guéhéneuc, Yann-Gäel.
2017.
« Semantic Analysis of RESTful APIs for the detection of linguistic patterns and antipatterns ».
International Journal of Cooperative Information Systems, vol. 26, nº 2.
Pappas, Georgios, Joncas, Simon, Michaud, Véronique et Botsis, John.
2017.
« The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II – Modeling ».
Composite Structures, vol. 181.
pp. 379-390.
Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, Hakim.
2017.
« A 2-D transient numerical heat transfer model of the solar absorber plate to improve PV/T solar collector systems ».
Solar Energy, vol. 153.
pp. 366-378.
Parzysz, Fanny, Mai, Vu et Gagnon, François.
2017.
« Modeling and analysis of energy efficiency and interference for cellular relay deployment ».
IEEE Transactions on Wireless Communications, vol. 16, nº 2.
pp. 982-997.
Pasillas-Díaz, José Ramon et Ratté, Sylvie.
2017.
« Bagged subspaces for unsupervised outlier detection ».
Computational Intelligence, vol. 33, nº 3.
pp. 507-523.
Peng, Jizong, Han, Lei, Zhu, Qingming, Qiu, Ciyuan, Zhang, Yong, Tremblay, Christine et Su, Yikai.
2017.
« SQNR improvement enabled by nonuniform DAC output levels for IM-DD OFDM systems ».
IEEE Photonics Journal, vol. 9, nº 2.
Pereira, Daniel, Haiat, Guillaume, Fernandes, Julio et Belanger, Pierre.
2017.
« Simulation of acoustic guided wave propagation in cortical bone using a semi-analytical finite element method ».
Journal of the Acoustical Society of America, vol. 141, nº 4.
pp. 2538-2547.
Pfister, Stephan, Boulay, Anne-Marie, Berger, Markus, Hadjikakou, Michalis, Motoshita, Masaharu, Hess, Tim, Ridoutt, Brad, Weinzettel, Jan, Scherer, Laura, Döll, Petra, Manzardo, Alessandro, Núñez, Montserrat, Verones, Francesca, Humbert, Sebastien, Buxmann, Kurt, Harding, Kevin, Benini, Lorenzo, Oki, Taikan, Finkbeiner, Matthias et Henderson, Andrew.
2017.
« Understanding the LCA and ISO water footprint: A response to Hoekstra (2016) “A critique on the water-scarcity weighted water footprint in LCA” ».
Ecological Indicators, vol. 72.
pp. 352-359.
Plante, Francis et Laporte, Claude Y..
2017.
« Développement et mise en oeuvre d'un processus de type agile-ISO 29110 au sein d'une grande institution financière Canadienne ».
Génie Logiciel, nº 120.
pp. 37-45.
Plazak, Joseph, Drouin, Simon, Collins, Louis et Kersten-Oertel, Marta.
2017.
« Distance sonification in image-guided neurosurgery ».
Healthcare Technology Letters, vol. 4, nº 5.
pp. 199-203.
Poirier, Erik A., Forgues, Daniel et Staub-French, Sheryl.
2017.
« Understanding the impact of BIM on collaboration: a Canadian case study ».
Building Research and Information, vol. 45, nº 6.
pp. 681-695.
Poirier, Marc, Gagnon, Martin, Tahan, Antoine, Coutu, André et Chamberland-lauzon, Joël.
2017.
« Extrapolation of dynamic load behaviour on hydroelectric turbine blades with cyclostationary modelling ».
Mechanical Systems and Signal Processing, vol. 82.
pp. 193-205.
Poissant, Dominique, Arsenault, Richard et Brissette, François.
2017.
« Impact of parameter set dimensionality and calibration procedures on streamflow prediction at ungauged catchments ».
Journal of Hydrology: Regional Studies, vol. 12.
pp. 220-237.
Polk, Molly H., Young, Kenneth R., Baraer, Michel, Mark, Bryan G., McKenzie, Jeffrey M., Bury, Jeffrey et Carey, Mark.
2017.
« Exploring hydrologic connections between tropical mountain wetlands and glacier recession in Peru's Cordillera Blanca ».
Applied Geography, vol. 78.
pp. 94-103.
Polotski, Vladimir et Kenne, Jean-Pierre.
2017.
« Adaptive control of manufacturing systems with incomplete information about demand and inventory ».
[Article de conférence]. IFAC-PapersOnLine, vol. 50, nº 1.
pp. 15598-15603.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2017.
« Production and setup policy optimization for hybrid manufacturing–remanufacturing systems ».
International Journal of Production Economics, vol. 183, Part B.
pp. 322-333.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2017.
« Set-up and production planning in hybrid manufacturing-remanufacturing systems with large returns ».
International Journal of Production Research, vol. 55, nº 13.
pp. 3766-3787.
Poorahong, Sujittra, Izquierdo, Ricardo et Siaj, Mohamed.
2017.
« An efficient porous molybdenum diselenide catalyst for electrochemical hydrogen generation ».
Journal of Materials Chemistry A, vol. 5, nº 39.
pp. 20993-21001.
Poulin, Jean-René, Terriault, Patrick, Dubé, Martine et Vachon, Pierre-Luc.
2017.
« Development of a morphing wing extrados made of composite materials and actuated by shape memory alloys ».
Journal of Intelligent Material Systems and Structures, vol. 28, nº 11.
pp. 1437-1453.
Pradhan, Prabin, Sengupta, Dipankar, Wang, Lixian, Tremblay, Christine, LaRochelle, Sophie et Ung, Bora.
2017.
« The Brillouin gain of vector modes in a few-mode fiber ».
Scientific Reports, vol. 7, nº 1.
Preiswerk, Frank, Toews, Matthew, Cheng, Cheng-Chieh, Chiou, Jr-yuan George, Mei, Chang-Sheng, Schaefer, Lena F., Hoge, W. Scott, Schwartz, Benjamin M., Panych, Lawrence P. et Madore, Bruno.
2017.
« Hybrid MRI-Ultrasound acquisitions, and scannerless real-time imaging ».
Magnetic Resonance in Medicine, vol. 78, nº 3.
pp. 897-908.
Prokoshkin, S., Dubinskiy, S., Brailovski, V., Korotitskiy, A., Konopatsky, A., Sheremetyev, V. et Blinova, E..
2017.
« Nanostructures and stress-induced phase transformation mechanism in titanium nickelide annealed after moderate cold deformation ».
Materials Letters, vol. 192.
pp. 111-114.
Prokoshkin, Sergey, Brailovski, Vladimir, Dubinskiy, Sergey, Inaekyan, Karine et Kreitcberg, Alena.
2017.
« Peculiarities of nanostructure formation upon post-deformation annealing of Ti-Ni shape memory alloys ».
[Article de conférence]. Materials Today: Proceedings, vol. 4, nº 3.
pp. 4819-4824.
Quevedo González, Fernando J., Reimeringer, Michael et Nuño, Natalia.
2017.
« On the two-dimensional simplification of three-dimensional cementless hip stem numerical models ».
Journal of Biomechanical Engineering, vol. 139, nº 3.
Quintero-Araujo, Carlos L., Caballero-Villalobos, Juan Pablo, Juan, Angel A. et Montoya-Torres, Jairo R..
2017.
« A biased-randomized metaheuristic for the capacitated location routing problem ».
International Transactions in Operational Research, vol. 24, nº 5.
pp. 1079-1098.
Rahman, M. Moshiur, Despins, Charles et Affes, Sofiene.
2017.
« End-to-end programmable, cloud-based virtualized HetNet: Advances made & challenges to address ».
Computer Communications, vol. 105.
pp. 14-32.
Rahmani, Mohammad H. et Deslandes, Dominic.
2017.
« Backward to forward scanning periodic leaky-wave antenna with wide scanning range ».
IEEE Transactions on Antennas and Propagation, vol. 65, nº 7.
pp. 3326-3335.
Ralchenko, Maxim, Roper, Mike, Svilans, Markus et Samson, Claire.
2017.
« Coupling of very low frequency through-the-earth radio signals to elongated conductors ».
IEEE Transactions on Antennas and Propagation, vol. 65, nº 6.
pp. 3146-3153.
Raouf, Fareh, Saad, Mohamad, Saad, Maarouf et Maamar, Bettayeb.
2017.
« Distributed adaptive control strategy for flexible link manipulators ».
Robotica, vol. 35, nº 7.
pp. 1562-1584.
Ren, Qun et Bigras, Pascal.
2017.
« A Highly accurate model-free motion control system with a mamdani fuzzy feedback controller combined with a TSK fuzzy feed-forward controller ».
Journal of Intelligent & Robotic Systems, vol. 86, nº 3/4.
pp. 367-379.
Reza Motamedi, M., Otis, Martin et Duchaine, Vincent.
2017.
« The Impact of Simultaneously Applying Normal Stress and Vibrotactile Stimulation for Feedback of Exteroceptive Information ».
Journal of Biomechanical Engineering, vol. 139, nº 6.
Rezabeigi, Ehsan, Sta, Marwa, Swain, Mitasha, McDonald, Julia, Demarquette, Nicole R., Drew, Robin A. L. et Wood-Adams, Paula M..
2017.
« Electrospinning of porous polylactic acid fibers during nonsolvent induced phase separation ».
Journal of Applied Polymer Science, vol. 134, nº 20.
Rezkallah, Miloud, Sharma, Shailendra, Chandra, Ambrish, Singh, Bhim et Rousse, Daniel R..
2017.
« Lyapunov function and sliding mode control approach for Solar-PV grid interface system ».
IEEE Transactions on Industrial Electronics, vol. 64, nº 1.
pp. 785-795.
Režnáková, Marta, Tencer, Lukas, Plamondon, Réjean et Cheriet, Mohamed.
2017.
« Forgetting of unused classes in missing data environment using automatically generated data: Application to on-line handwritten gesture command recognition ».
Pattern Recognition, vol. 72.
pp. 355-367.
Rhéaume, Louis et Gardoni, Mickaël.
2017.
« Infocom business models innovation with the development of corporate universities ».
International Journal of Innovation and Learning, vol. 21, nº 1.
pp. 98-113.
Riahi, Nesrine, Murschel, Frederic, Lerouge, Sophie, Durocher, Yves, Henry, Olivier et De Crescenzo, Gregory.
2017.
« Bioavailability of immobilized epidermal growth factor: covalent versus noncovalent grafting ».
Biointerphases, vol. 12, nº 1.
Rimpault, X., Chatelain, J. F., Klemberg-Sapieha, J. E. et Balazinski, M..
2017.
« Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals ».
CIRP Journal of Manufacturing Science and Technology, vol. 16.
pp. 72-80.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta Ewa et Balazinksi, Marek.
2017.
« Burr height monitoring while drilling of CFRP/titanium/aluminium stacks ».
Mechanics and Industry, vol. 18, nº 1.
Riyadh, Belamadi, Ramzi, Mdouki, Ilinca, Adrian et Abdelouaheb, Djemili.
2017.
« Insight into rotational effects on a horizontal axis wind turbine NREL phase ii Using CFD simulation and inverse BEM ».
International Journal of Energetica, vol. 2, nº 1.
pp. 29-41.
Rmili, Lazhar, Hamouda, Mahmoud, Rahmani, Salem, Blanchette, Handy Fortin et Al-Haddad, Kamal.
2017.
« PWM-based integral sliding-mode controller for unity input power factor operation of indirect matrix converter ».
Journal of Power Electronics, vol. 17, nº 4.
pp. 1048-1057.
Robati, Tiyam, Gherbi, Abdelouahed, El Kouhen, Amine et Mullins, John.
2017.
« Design and simulation of distributed IMA architectures using TTEthernet: a model-driven approach ».
Journal of Ambient Intelligence and Humanized Computing, vol. 8, nº 3.
pp. 345-355.
Rogti, Fatiha et David, Éric.
2017.
« Effect of SiC particles on the electrical conductivity of epoxy composites ».
Journal of Electronic Materials, vol. 46, nº 2.
pp. 742-746.
Romero-Conrado, Alfonso Rafael, Castro-Bolaño, Lauren Julieth, Montoya-Torres, Jairo R. et Jiménez-Barros, Miguel Ángel.
2017.
« Operations research as a decision-making tool in the health sector: A state of the art ».
DYNA, vol. 84, nº 201.
pp. 129-137.
Rory, V. O'Connor et Claude, Y. Laporte.
2017.
« The evolution of the ISO/IEC 29110 set of standards and guides ».
International Journal of Information Technologies and Systems Approach (IJITSA), vol. 10, nº 1.
pp. 1-21.
Rouleau, Dominique M., Garant-Saine, Laurianne, Canet, Fanny, Sandman, Emilie, Ménard, Jérémie et Clément, Julien.
2017.
« Measurement of combined glenoid and Hill–Sachs lesions in anterior shoulder instability ».
Shoulder and Elbow, vol. 9, nº 3.
pp. 160-168.
Rousseau, Clément, Fannou, Jean-Louis Comlan, Lamarche, Louis et Kajl, Stanislaw.
2017.
« Modeling and experimental validation of a transient direct expansion heat pump ».
International Journal of Renewable Energy Development, vol. 6, nº 2.
pp. 145-155.
Roy, Partha Pratim, Zhong, Guoqiang et Cheriet, Mohamed.
2017.
« Tandem hidden Markov models using deep belief networks for offline handwriting recognition ».
Frontiers of Information Technology and Electronic Engineering, vol. 18, nº 7.
pp. 978-988.
Saadati, Mohammad, Azari Khosroshahi, Rasoul, Ebrahimi, Golamreza et Jahazi, Mohammad.
2017.
« Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ».
Materials Science and Engineering: A, vol. 706.
pp. 142-152.
Saadati, Mohammad, Khosroshahi, Rasoul Azari, Ebrahimi, Gholamreza et Jahazi, Mohammad.
2017.
« Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ».
Materials Characterization, vol. 131.
pp. 234-243.
Sabri, V., Sattarpanah, S., Tahan, S. A., Cuillière, J. C., François, V. et Pham, X. T..
2017.
« A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 5-8.
pp. 2411-2423.
Saeed Kilani, Mohammad, Zehtabi, Fatemeh, Lerouge, Sophie, Soulez, Gilles, Bartoli, Jean Michel, Vidal, Vincent et Badran, Mohammad F..
2017.
« New alcohol and onyx mixture for embolization: Feasibility and proof of concept in both in vitro and in vivo models ».
CardioVascular and Interventional Radiology, vol. 40, nº 5.
pp. 735-743.
Saidi, Alireza, Desfontaines, Laurent, Champeval, Alain, Lebreux, Jean-David, Lecomte, Christiane, Pruneau, Michael, Grondein, Aurélie, Izquierdo, Ricardo et Bélanger, Daniel.
2017.
« The effect of ink formulation and electrode geometry design on the electrochemical performance of a printed alkaline battery ».
Flexible and Printed Electronics, vol. 2, nº 1.
Saleem, Essa Abrahim Abdulgader et Dao, Thien-My.
2017.
« Series-parallel systems reliability optimization using genetic algorithm and statistical analysis ».
[Article de conférence]. International Journal of Industrial and Manufacturing Engineering, vol. 11, nº 5.
pp. 953-959.
Saleem, Essa Abrahim Abdulgader, Dao, Thien-My et Zhaoheng, Liu.
2017.
« Multi-objective optimization of multi-state reliability system using hybrid metaheuristic genetic algorithm and fuzzy function for redundancy allocation ».
American Journal of Engineering Research, vol. 6, nº 10.
pp. 98-107.
Samson, C., Mah, J., Haltigin, T., Holladay, S., Ralchenko, M., Pollard, W. et Monteiro Santos, F. A..
2017.
« Combined electromagnetic geophysical mapping at Arctic perennial saline springs: Possible applications for the detection of water in the shallow subsurface of Mars ».
Advances in Space Research, vol. 59, nº 9.
pp. 2325-2334.
Sandoval, Francisco, Poitau, Gwenael et Gagnon, François.
2017.
« Hybrid peak-to-average power ratio reduction techniques: Review and performance comparison ».
IEEE Access, vol. 5.
pp. 27145-27161.
Sanjose, Marlène et Moreau, Stéphane.
2017.
« Direct noise prediction and control of an installed large low-speed radial fan ».
European Journal of Mechanics - B/Fluids, vol. 61.
pp. 235-243.
Sanjose, Marlène, Moreau, Stéphane et Gullbrand, Jessica.
2017.
« Hybrid noise predictions of a radial notebook blower ».
European Journal of Mechanics - B/Fluids, vol. 61.
pp. 226-234.
Sanjosé, Marlène, Moreau, Stéphane, Pestana, Miguel et Roger, Michel.
2017.
« Effect of weak outlet-guide-vane heterogeneity on rotor–stator tonal noise ».
AIAA Journal, vol. 55, nº 10.
pp. 3440-3457.
Santoro, Pablo, Fossati, Monica, Tassi, Pablo, Huybrechts, Nicolas, Pham Van Bang, Damien et Piedra-Cueva, J. C. Ismael.
2017.
« A coupled wave–current–sediment transport model for an estuarine system: Application to the Río de la Plata and Montevideo Bay ».
Applied Mathematical Modelling, vol. 52.
pp. 107-130.
Santos Da Costa, Lucas, Dos Santos Lucio, Willians, Maniçoba Da Silva, Adriano et de Paula Ferreira, William.
2017.
« Discrete simulation applied to the production process of electronic components ».
Independent Journal of Management & Production, vol. 38, nº 2.
Sarafan, S., Wanjara, P., Gholipour, J., Champliaud, H. et Mathieu, L..
2017.
« Mechanical properties of electron beam welds in heavy-section UNS S41500 martensitic stainless steel ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 9/12.
pp. 4141-4150.
Sarafan, Sheida, Wanjara, Priti, Gholipour, Javad, Champliaud, Henri et Mathieu, Louis.
2017.
« Mehanical properties of electron beam welded joints in thick gage CA6NM stainless steel ».
Journal of Materials Engineering and Performance, vol. 26, nº 10.
pp. 4768-4780.
Saulnier, Mathieu, Trudeau, Charles, Cloutier, Sylvain G. et Schougaard, Steen B..
2017.
« Investigation of CVD multilayered graphene as negative electrode for lithium-ion batteries ».
Electrochimica Acta, vol. 244.
pp. 54-60.
Savoji, Houman, Maire, Marion, Lequoy, Pauline, Liberelle, Benoit, De Crescenzo, Gregory, Ajji, Abdellah, Wertheimer, Michael R. et Lerouge, Sophie.
2017.
« Combining electrospun fiber mats and bioactive coatings for vascular graft prostheses ».
Biomacromolecules, vol. 18, nº 1.
pp. 303-310.
Sboui, Lokman, Ghazzai, Hakim, Rezki, Zouheir et Alouini, Mohamed-Slim.
2017.
« Achievable rates of UAV-relayed cooperative cognitive radio MIMO systems ».
IEEE Access, vol. 5.
pp. 5190-5204.
Sboui, Lokman, Rezki, Zouheir et Alouini, Mohamed-Slim.
2017.
« Achievable rates of cognitive radio networks using multilayer coding with limited CSI ».
IEEE Transactions on Vehicular Technology, vol. 66, nº 1.
pp. 395-405.
Sboui, Lokman, Rezki, Zouheir et Alouini, Mohamed-Slim.
2017.
« Energy-efficient power allocation for MIMO-SVD systems ».
IEEE Access, vol. 5.
pp. 9774-9784.
Sghaier, Moslem Ouled, Foucher, Samuel et Lepage, Richard.
2017.
« River extraction from high-resolution sar images combining a structural feature set and mathematical morphology ».
IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 10, nº 3.
pp. 1025-1038.
Shaer, B., Kenné, J. P., Kaddissi, C. et Mintsa, H. A..
2017.
« Real-time hybrid control of electrohydraulic active suspension ».
International Journal of Robust and Nonlinear Control, vol. 27, nº 18.
pp. 4968-4991.
Shaker, Matineh, Erdogmus, Deniz, Dy, Jennifer et Bouix, Sylvain.
2017.
« Subject-specific abnormal region detection in traumatic brain injury using sparse model selection on high dimensional diffusion data ».
Medical Image Analysis, vol. 37.
pp. 56-65.
Sharma, Shailendra Kumar, Chandra, Ambrish, Saad, Maarouf, Lefebvre, Serge, Asber, Dalal et Lenoir, Laurent.
2017.
« Voltage flicker mitigation employing smart loads with high penetration of renewable energy in distribution systems ».
IEEE Transactions on Sustainable Energy, vol. 8, nº 1.
pp. 414-424.
Shateri, Mohammadhadi, Ghaib, Maha, Svecova, Dagmar et Thomson, Douglas.
2017.
« On acoustic emission for damage detection and failure prediction in fiber reinforced polymer rods using pattern recognition analysis ».
Smart Materials and Structures, vol. 26, nº 6.
Shavvalpour, S., Khanjarpanah, H., Zamani, F. et Jabbarzadeh, A..
2017.
« Petrochemical products market and stock market returns: Empirical evidence from Tehran stock exchange ».
Iranian Economic Review, vol. 21, nº 2.
pp. 383-403.
Sher, Hadeed Ahmed, Rizvi, Arslan Abbas, Addoweesh, Khaled E. et Al-Haddad, Kamal.
2017.
« A single-stage stand-alone photovoltaic energy system with high tracking efficiency ».
IEEE Transactions on Sustainable Energy, vol. 8, nº 2.
pp. 755-762.
Sheremetyev, V. A., Dubinskiy, S. M., Ikbal, M. A., Korobkova, A. A., Kazakbiev, A. M., Prokoshkin, S. D. et Brailovski, V..
2017.
« Effect of dynamical chemical etching on the porous structure parameters of superelastic medical TiNbZr alloy foam ».
Russian Metallurgy (Metally), vol. 2017, nº 10.
pp. 789-793.
Shih, Andy et Akinwande, Akintunde Ibitayo.
2017.
« Solution-processed high-voltage organic thin film transistor ».
MRS Advances, vol. 2, nº 51.
pp. 2961-2966.
Shoari, Niloofar et Dubé, Jean-Sébastien.
2017.
« Application of mixed effects models for characterizing contaminated sites ».
Chemosphere, vol. 166.
pp. 380-388.
Simoneau, Charles, Terriault, Patrick, Jetté, Bruno, Dumas, Mathieu et Brailovski, Vladimir.
2017.
« Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing ».
Materials and Design, vol. 114.
pp. 546-556.
Singh, Gagandeep, Mougel, Leo, Beauregard, Yvan et Zhao, Yaoyao Fiona.
2017.
« Towards optimal engineering multitasking level through stochastic modelling ».
International Journal of Operational Research, vol. 28, nº 2.
pp. 263-278.
Siredey-Schwaller, N., Hamel-Akre, J., Peltier, L., Hazotte, A. et Bocher, P..
2017.
« Solidification sequence of Ni-Si-Cr ~3wt% B brazing alloys ».
Welding in the World, vol. 61, nº 6.
pp. 1253-1265.
Snaiki, Reda et Wu, Teng.
2017.
« A linear height-resolving wind field model for tropical cyclone boundary layer ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 171.
pp. 248-260.
Snaiki, Reda et Wu, Teng.
2017.
« Modeling tropical cyclone boundary layer: Height-resolving pressure and wind fields ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 170.
pp. 18-27.
Soliman, Hany A. G., Mac-Thiong, Jean-Marc, Levasseur, Annie, Parent, Stefan et Petit, Yvan.
2017.
« Assessment of regional bone density in fractured vertebrae using quantitative computed tomography ».
Asian Spine Journal, vol. 11, nº 1.
pp. 57-62.
Sorais, Manon, Rezaei, Ali, Okeme, Joseph O., Diamond, Miriam L., Izquierdo, Ricardo, Giroux, Jean-François et Verreault, Jonathan.
2017.
« A miniature bird-borne passive air sampler for monitoring halogenated flame retardants ».
Science of the Total Environment, vol. 599-600.
pp. 1903-1911.
Soujeri, Ebrahim, Kaddoum, Georges, Au, Minh et Herceg, Marijan.
2017.
« Frequency index modulation for low complexity low energy communication networks ».
IEEE Access, vol. 5.
pp. 23276-23287.
Staron, Miroslaw, Meding, Wilhelm, Abran, Alain et Bosch, Jan.
2017.
« Preface to the special issue on advances in software measurement ».
[Éditorial]. Science of Computer Programming, vol. 135.
pp. 1-3.
Stinville, J. C., Echlin, M. P., Callahan, P. G., Miller, V. M., Texier, D., Bridier, F., Bocher, P. et Pollock, T. M..
2017.
« Measurement of strain localization resulting from monotonic and cyclic loading at 650C in nickel base superalloys ».
Experimental Mechanics, vol. 57, nº 8.
pp. 1289-1309.
St-Onge, David, Brèches, Pierre-Yves, Sharf, Inna, Reeves, Nicolas, Rekleitis, Ioannis, Abouzakhm, Patrick, Girdhar, Yogesh, Harmat, Adam, Dudek, Gregory et Giguère, Philippe.
2017.
« Control, localization and human interaction with an autonomous lighter-than-air performer ».
Robotics and Autonomous Systems, vol. 88.
pp. 165-186.
Sun, Binhan, Vanderesse, Nicolas, Fazeli, Fateh, Scott, Colin, Chen, Jianqiang, Bocher, Philippe, Jahazi, Mohammad et Yue, Stephen.
2017.
« Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ».
Scripta Materialia, vol. 133.
pp. 9-13.
Taherzadeh-Sani, Mohammad, Hussain Hussaini, Said M., Rezaee-Dehsorkh, Hamidreza, Nabki, Frederic et Sawan, Mohamad.
2017.
« A 170-dB CMOS TIA with 52-pA input-referred noise and 1-MHz bandwidth for very low current sensing ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 25, nº 5.
pp. 1756-1766.
Taherzadeh-Sani, Mohammad, Soer, Michiel, Deslandes, Dominic et Nabki, Frederic.
2017.
« 65 nm CMOS switching discontinuous-conduction mode buck converter with 330 ns start-up time for light-load power-cycled applications ».
IET Circuits, Devices and Systems, vol. 11, nº 3.
pp. 267-273.
Tan, Long, Yang, Fan, Kim, Mee Rahn, Li, Pandeng, Gangadharan, Deepak Thrithamarassery, Margot, Joëlle, Izquierdo, Ricardo, Chaker, Mohamed et Ma, Dongling.
2017.
« Enhanced long-term and thermal stability of polymer solar cells in air at high humidity with the formation of unusual quantum dot networks ».
ACS Applied Materials and Interfaces, vol. 9, nº 31.
pp. 26257-26267.
Tanguy, Audrey, Villot, Jonathan, Glaus, Mathias, Laforest, Valerie et Hausler, Robert.
2017.
« Service area size assessment for evaluating the spatial scale of solid waste recovery chains: A territorial perspective ».
Waste Management, vol. 64.
pp. 386-396.
Teimoury, Ebrahim, Jabbarzadeh, Armin et Babaei, Mohammadhosein.
2017.
« Integrating strategic and tactical decisions in livestock supply chain using bi-level programming, case study: Iran poultry supply chain ».
PLoS ONE, vol. 12, nº 10.
Telo, Leonardo Rossi Azevedo, Silva, Raphael Martins da, Silva, Adriano Maniçoba da, Zampini, Eugenio De Felice et Paula, William Ferreira de.
2017.
« Proposição de sequenciamento da produção com uso do tempo de preparação ».
South American Development Society Journal, vol. 3, nº 8.
Tencer, L., Reznakova, M. et Cheriet, M..
2017.
« Summit-Training: A hybrid Semi-Supervised technique and its application to classification tasks ».
Applied Soft Computing, vol. 50.
pp. 1-20.
Tencer, L., Reznakova, M. et Cheriet, M..
2017.
« UFuzzy: Fuzzy models with Universum ».
Applied Soft Computing, vol. 59.
pp. 1-18.
Terriault, Patrick et Brailovski, Vladimir.
2017.
« Influence of boundary conditions on the simulation of a diamond-type lattice structure: A preliminary study ».
Advances in Materials Science and Engineering, vol. 2017.
Terrier, Philippe, Glaus, Mathias et Raufflet, Emmanuel.
2017.
« Biomimétisme : outils pour une démarche écoinnovante en ingénierie ».
VertigO : la revue électronique en sciences de l'environnement, vol. 16, nº 3.
Thakare, Dhawal R., Abid, Alexandre, Pereira, Daniel, Fernandes, Julio, Belanger, Pierre et Rajagopal, Prabhu.
2017.
« Semi-analytical finite-element modeling approach for guided wave assessment of mechanical degradation in bones ».
International Biomechanics, vol. 4, nº 1.
pp. 17-27.
Tidjani, Fadoul Souleyman, Hamadi, Abdelhamid, Chandra, Ambrish, Pillay, Pragasen et Ndtoungou, Auguste.
2017.
« Optimization of standalone microgrid considering active damping technique and smart power management using fuzzy logic supervisor ».
IEEE Transactions on Smart Grid, vol. 8, nº 1.
pp. 475-484.
Tondji, Y. et Botez, R. M..
2017.
« Semi-empirical estimation and experimental method for determining inertial properties of the Unmanned Aerial System – UAS-S4 of Hydra Technologies ».
Aeronautical Journal, vol. 121, nº 1245.
pp. 1648-1682.
Tong, Xin, Wei, Qiliang, Zhan, Xinxing, Zhang, Gaixia et Sun, Shuhui.
2017.
« The new graphene family materials: Synthesis and applications in oxygen reduction reaction ».
Catalysts, vol. 7, nº 1.
Tong, Xin, Zhang, Jianming, Zhang, Gaixia, Wei, Qiliang, Chenitz, Régis, Claverie, Jerome P. et Sun, Shuhui.
2017.
« Ultrathin carbon-coated pt/carbon nanotubes: A highly durable electrocatalyst for oxygen reduction ».
Chemistry of Materials, vol. 29, nº 21.
pp. 9579-9587.
Tongne, Amèvi, Desrayaud, Christophe, Jahazi, Mohammad et Feulvarch, Eric.
2017.
« On material flow in friction stir welded al alloys ».
Journal of Materials Processing Technology, vol. 239.
pp. 284-296.
Touazine, Heithem, Akab, Jordan, Jahazi, Mohammad, Tahan, Antoine, Jomaa, Walid et Bocher, Philippe.
2017.
« Modeling of the microstructure alteration induced by hard turning of Inconel 718 ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 9-12.
pp. 3705-3712.
Touazine, Heithem, Jahazi, Mohammad et Bocher, Philippe.
2017.
« Accurate determination of damaged subsurface layers in machined Inconel 718 ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 3419-3427.
Tounsi, Farès, Said, Mohamed Hadj, Kouki, Ammar B. et Mezghani, Brahim.
2017.
« AC actuation contribution to the induced electromotive force in the miniaturized inductive planar microphone ».
Analog Integrated Circuits and Signal Processing, vol. 90, nº 3.
pp. 551-562.
Tout, Hanine, Talhi, Chamseddine, Kara, Nadjia et Mourad, Azzam.
2017.
« Smart mobile computation offloading: Centralized selective and multi-objective approach ».
Expert Systems with Applications, vol. 80.
pp. 1-13.
Tran, Ha-Vu, Kaddoum, Georges, Tran, Hung et Hong, Een Kee.
2017.
« Downlink power optimization for heterogeneous networks with time reversal-based transmission under backhaul limitation ».
IEEE Access, vol. 5.
pp. 755-770.
Travaglini, Christophe, Bescond, Christophe, Viens, Martin et Belanger, Pierre.
2017.
« Feasibility of high frequency guided wave crack monitoring ».
Structural Health Monitoring, vol. 16, nº 4.
Tremblay, Olivier, Fortin-Blanchette, Handy, Gagnon, Richard et Brissette, Yves.
2017.
« Contribution to stability analysis of power hardware-in-the-loop simulators ».
IET Generation, Transmission and Distribution, vol. 11, nº 12.
pp. 3073-3079.
Triki, Ennouri, Nguyen-Tri, Phuong, Gauvin, Chantal et Vu-Khanh, Toan.
2017.
« Combined puncture and cutting of elastomer membranes: a fracture energy approach ».
Journal of Applied Polymer Science, vol. 134, nº 25.
Trudeau, Charles, Bolduc, Martin, Beaupré, Patrick, Topart, Patrice, Alain, Christine et Cloutier, Sylvain.
2017.
« Inkjet-printed flexible active multilayered structures ».
MRS Advances, vol. 2, nº 18.
pp. 1015-1020.
Tu, Fubin, Delbergue, Dorian, Miao, Hongyan, Klotz, Thierry, Brochu, Myriam, Bocher, Philippe et Levesque, Martin.
2017.
« A sequential DEM-FEM coupling method for shot peening simulation ».
Surface and Coatings Technology, vol. 319.
pp. 200-212.
Urlea, V. et Brailovski, V..
2017.
« Electropolishing and electropolishing-related allowances for IN625 alloy components fabricated by laser powder-bed fusion ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 9-12.
pp. 4487-4499.
Urlea, V. et Brailovski, V..
2017.
« Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components ».
Journal of Materials Processing Technology, vol. 242.
pp. 1-11.
Valentin, Olivier, John, Sasha M. et Laville, Frédéric.
2017.
« Using auditory steady-state responses for measuring hearing protector attenuation ».
Noise and Health, vol. 19, nº 86.
pp. 1-9.
Valentin, Olivier et Laville, Frédéric.
2017.
« Using auditory steady-state responses for measuring hearing protector occlusion effect ».
Noise and Health, vol. 19, nº 91.
pp. 278-285.
Valentin, Olivier, Viallet, Guilhem et Voix, Jérémie.
2017.
« Eartrodes: Towards a wireless in-ear custom-fitted brain computer interface ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 45, nº 3.
pp. 142-143.
Vallerand, Jonathan, Lapalme, James et Moise, Alexandre.
2017.
« Analysing enterprise architecture maturity models: a learning perspective ».
Enterprise Information Systems, vol. 11, nº 6.
pp. 859-883.
Vega-Azamar, Ricardo Enrique, Romero-López, Rabindranarth, Oropeza-García, Norma Angélica, Glaus, Mathias, Hausler, Robert et Silva-Poot, Herlinda del Socorro.
2017.
« Emergy evaluation of dwelling operation in five housing units of Montreal Island, Canada ».
Sustainability, vol. 9, nº 4.
Vejdani, Parisa, Allidina, Karim et Nabki, Frederic.
2017.
« Analysis of sensitivity and power consumption of chopping techniques for integrated capacitive sensor interface circuits ».
Journal of Low Power Electronics and Applications, vol. 7, nº 4.
Verones, Francesca, Bare, Jane, Bulle, Cécile, Frischknecht, Rolf, Hauschild, Michael, Hellweg, Stefanie, Henderson, Andrew, Jolliet, Olivier, Laurent, Alexis, Liao, Xun, Lindner, Jan Paul, Maia de Souza, Danielle, Michelsen, Ottar, Patouillard, Laure, Pfister, Stephan, Posthuma, Leo, Prado, Valentina, Ridoutt, Brad, Rosenbaum, Ralph K., Sala, Serenella, Ugaya, Cassia, Vieira, Marisa et Fantke, Peter.
2017.
« LCIA framework and cross-cutting issues guidance within the UNEP-SETAC Life Cycle Initiative ».
Journal of Cleaner Production, vol. 161.
pp. 957-967.
Vinches, L., Zemzem, M. et Hallé, S..
2017.
« Effects of sweat and 3D-deformation on the mechanical behaviour of nitrile rubber gloves ».
Progress in Rubber, Plastics and Recycling Technology, vol. 33, nº 4.
pp. 203-220.
Vinches, Ludwig et Hallé, Stéphane.
2017.
« Resistance of Type 5 chemical protective clothing against nanometric airborne particles: Behavior of seams and zipper ».
Journal of Occupational and Environmental Hygiene, vol. 14, nº 12.
pp. 939-946.
Vinches, Ludwig et Hallé, Stéphane.
2017.
« Toxicité de la cellulose nanométrique : des incertitudes persistent ».
Bulletin de Veille Scientifique, nº 31.
pp. 13-15.
Vinches, Ludwig, Zemzem, Mohamed, Hallé, Stéphane, Peyrot, Caroline, Wilkinson, Kevin J. et Tufenkji, Nathalie.
2017.
« An improved experimental methodology to evaluate the effectiveness of protective gloves against nanoparticles in suspension ».
Journal of Occupational and Environmental Hygiene, vol. 14, nº 7.
D95-D101.
Voix, Jérémie.
2017.
« Hearing protector fit-testing: Spectrum uncertainty budgets ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 45, nº 3.
pp. 154-155.
Vu, Viet-Hung, Liu, Zhaoheng, Thomas, Marc et Hazel, Bruce.
2017.
« Modal analysis of a light-weight robot with a rotating tool installed at the end effector ».
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 231, nº 9.
pp. 1664-1676.
Wafaa, Majid Baa et Dessaint, Louis- A..
2017.
« Multi-objective stochastic optimal power flow considering voltage stability and demand response with significant wind penetration ».
IET Generation, Transmission and Distribution, vol. 11, nº 14.
pp. 3499-3509.
Wagnac, Eric, Aubin, Carl-Éric, Chaumoître, Kathia, Mac-Thiong, Jean-Marc, Ménard, Anne-Laure, Petit, Yvan, Garo, Anaïs et Arnoux, Pierre-Jean.
2017.
« Substantial vertebral body osteophytes protect against severe vertebral fractures in compression ».
PLoS ONE, vol. 12, nº 10.
Wang, Hui, Zhang, Lin, Li, Guoliang, Rogers, Kyle, Lin, Hongfei, Seers, Patrice, Ledan, Thomas, Ng, Siauw et Zheng, Ying.
2017.
« Application of uniform design experimental method in waste cooking oil (WCO) co-hydroprocessing parameter optimization and reaction route investigation ».
Fuel, vol. 210.
pp. 390-397.
Wang, Qingsong et Niu, Shuangxia.
2017.
« A novel hybrid-excited dual-PM machine with bidirectional flux modulation ».
IEEE Transactions on Energy Conversion, vol. 32, nº 2.
pp. 424-435.
Wang, Qingsong et Niu, Shuangxia.
2017.
« Overview of flux-controllable machines: Electrically excited machines, hybrid excited machines and memory machines ».
Renewable and Sustainable Energy Reviews, vol. 68.
pp. 475-491.
Wang, Qingsong, Niu, Shuangxia et Luo, Xiang.
2017.
« A novel hybrid Dual-PM machine excited by AC with DC bias for electric vehicle propulsion ».
IEEE Transactions on Industrial Electronics, vol. 64, nº 9.
pp. 6908-6919.
Wang, Qingsong, Niu, Shuangxia et Yang, Lin.
2017.
« Design optimization and comparative study of novel dual-PM excited machines ».
IEEE Transactions on Industrial Electronics, vol. 64, nº 12.
pp. 9924-9933.
Wang, Qingsong, Niu, Shuangxia et Yang, Shiyou.
2017.
« Design optimization and comparative study of novel magnetic-geared permanent magnet machines ».
IEEE Transactions on Magnetics, vol. 53, nº 6.
Wang, Wei, Liu, Fei, Liu, Zhaoheng et Yun, Chao.
2017.
« Prediction of depth of cut for robotic belt grinding ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 1.
pp. 669-708.
Wei, Qiliang, Fu, Yanqing, Zhang, Gaixia et Sun, Shuhui.
2017.
« Rational design of carbon-based oxygen electrocatalysts for zinc–air batteries ».
Current Opinion in Electrochemistry, vol. 4, nº 1.
pp. 45-59.
Wei, Qiliang, Zhang, Gaixia, Yang, Xiaohua, Chenitz, Régis, Banham, Dustin, Yang, Lijun, Ye, Siyu, Knights, Shanna et Sun, Shuhui.
2017.
« 3D porous Fe/N/C spherical nanostructures as high-performance electrocatalysts for oxygen reduction in both alkaline and acidic media ».
ACS Applied Materials and Interfaces, vol. 9, nº 42.
pp. 36944-36954.
Weiss, Julien, Jondeau, Emmanuel, Giani, Alain, Charlot, Benoit et Combette, Philippe.
2017.
« Static and dynamic calibration of a MEMS calorimetric shear-stress sensor ».
Sensors and Actuators, A: Physical, vol. 265.
pp. 211-216.
Weiss, Julien, Schwaab, Quentin, Boucetta, Yacine, Giani, Alain, Guigue, Celine, Combette, Philippe et Charlot, Benoit.
2017.
« Simulation and testing of a MEMS calorimetric shear-stress sensor ».
Sensors and Actuators, A: Physical, vol. 253.
pp. 210-217.
Wu, Qinghua, Maire, Marion, Lerouge, Sophie, Therriault, Daniel et Heuzey, Marie-Claude.
2017.
« 3D printing of microstructured and stretchable chitosan hydrogel for guided cell growth ».
Advanced Biosystems, vol. 1, nº 6.
Wu, Ting, Moosavi-Khoonsari, Elmira et Jung, In-Ho.
2017.
« Estimation of thermodynamic properties of oxide compounds from polyhedron method ».
Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, vol. 57.
pp. 107-117.
Xu, Jinke, Tam, Mifong, Samaei, Sepideh, Lerouge, Sophie, Barralet, Jake, Stevenson, Mary M. et Cerruti, Marta.
2017.
« Mucoadhesive chitosan hydrogels as rectal drug delivery vessels to treat ulcerative colitis ».
Acta Biomaterialia, vol. 48.
pp. 247-257.
Zarour, Mohammad, Desharnais, Jean-Marc et Abran, Alain.
2017.
« The software engineering body of knowledge : A benchmarking tool for organizational process assessment and improvement – case study ».
Indian Journal of Science and Technology, vol. 10, nº 43.
Zehtabi, Fatemeh, Dumont-Mackay, Vincent, Fatimi, Ahmed, Bertrand-Grenier, Anthony, Héon, Hélène, Soulez, Gilles et Lerouge, Sophie.
2017.
« Chitosan–sodium tetradecyl sulfate hydrogel: Characterization and preclinical evaluation of a novel sclerosing embolizing agent for the treatment of endoleaks ».
CardioVascular and Interventional Radiology, vol. 40, nº 4.
pp. 576-584.
Zehtabi, Fatemeh, Ispas-Szabo, Pompilia, Djerir, Djahida, Sivakumaran, Lojan, Annabi, Borhane, Soulez, Gilles, Mateescu, Mircea Alexandru et Lerouge, Sophie.
2017.
« Chitosan-doxycycline hydrogel: An MMP inhibitor/sclerosing embolizing agent as a new approach to endoleak prevention and treatment after endovascular aneurysm repair ».
Acta Biomaterialia, vol. 64.
pp. 94-105.
Zeighami, A., Dumas, R., Kanhonou, M., Hagemeister, N., Lavoie, F., de Guise, J. A. et Aissaoui, R..
2017.
« Tibio-femoral joint contact in healthy and osteoarthritic knees during quasi-static squat: A bi-planar X-ray analysis ».
Journal of Biomechanics, vol. 53.
pp. 178-184.
Zemzem, Mohamed, Vinches, Ludwig et Hallé, Stéphane.
2017.
« Sorption and diffusion of gold and silver nanoparticles in solution through nitrile rubber membrane ».
Journal of Applied Polymer Science, vol. 134, nº 39.
Zhang, Gaixia, Wei, Qiliang, Yang, Xiaohua, Tavares, Ana C. et Sun, Shuhui.
2017.
« RRDE experiments on noble-metal and noble-metal-free catalysts: Impact of loading on the activity and selectivity of oxygen reduction reaction in alkaline solution ».
Applied Catalysis B: Environmental, vol. 206.
pp. 115-126.
Zhang, Hai, Fernandes, Henrique, Hassler, Ulf, Ibarra-Castanedo, Clemente, Genest, Marc, Robitaille, François, Joncas, Simon et Maldague, Xavier.
2017.
« Comparative study of microlaser excitation thermography and microultrasonic excitation thermography on submillimeter porosity in carbon fiber reinforced polymer composites ».
Optical Engineering, vol. 56, nº 4.
Zhang, Mingli et Desrosiers, Christian.
2017.
« Image denoising based on sparse representation and gradient histogram ».
IET Image Processing, vol. 11, nº 1.
pp. 54-63.
Zhang, Xiuzhen, Li, Yuxuan, Kotagiri, Ramamohanarao, Wu, Lifang, Tari, Zahir et Cheriet, Mohamed.
2017.
« KRNN: k Rare-class Nearest Neighbour classification ».
Pattern Recognition, vol. 62.
pp. 33-44.
Zheng, Lijun, Yang, Dachi, Chang, Rong, Wang, Chengwen, Zhang, Gaixia et Sun, Shuhui.
2017.
« Crack-tips enriched platinum-copper superlattice nanoflakes as highly efficient anode electrocatalysts for direct methanol fuel cells ».
Nanoscale, vol. 9, nº 26.
pp. 8918-8924.
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2017.
« Numerical and experimental study of elastic interaction in bolted flange joints ».
Journal of Pressure Vessel Technology, vol. 139, nº 2.
Zohour Fazeli, Hanieh, Jabbarzadeh, Armin et Jabalameli, Mohammad Saeed.
2017.
« Locating incineration facilities to minimize environmental effects and visual pollution in Tehran mega city ».
Uncertain Supply Chain Management, vol. 5, nº 4.
pp. 297-314.
Zokaee, Shiva, Jabbarzadeh, Armin, Fahimnia, Behnam et Sadjadi, Seyed Jafar.
2017.
« Robust supply chain network design: an optimization model with real world application ».
Annals of Operations Research, vol. 257, nº 1-2.
pp. 15-44. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau