| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Document quand le type de document est "Article publié dans une revue, révisé par les pairs" et l'année est 2020Nombre de documents archivés : 666.
Abbas, Theleli, Issa, Mohamad et Ilinca, Adrian.
2020.
« Biomass cogeneration technologies: A review ».
Journal of Sustainable Bioenergy Systems, vol. 10, nº 1.
Abbas, Theleli, Issa, Mohamad, Ilinca, Adrian et El-Ali, Ali.
2020.
« Biomass combined heat and power generation for anticosti island: A case study ».
Journal of Power and Energy Engineering, vol. 8, nº 3.
Abdedou, Azzedine, Soulaïmani, Azzeddine et Tchamen, Georges Williams.
2020.
« Uncertainty propagation of dam break flow using the stochastic non-intrusive B-splines Bezier elements-based method ».
Journal of Hydrology, vol. 590.
Abdellatif, Manel, Tighilt, Rafik, Belkhir, Abdelkarim, Moha, Naouel, Guéhéneuc, Yann-Gäel et Beaudry, Éric.
2020.
« A multi-dimensional study on the state of the practice of REST APIs usage in Android apps ».
Automated Software Engineering, vol. 27.
pp. 187-228.
Abdelmoaty, Ahmed, Dahman, Ghassan, Bousselmi, Amen Allah, Poitau, Gwenael et Gagnon, François.
2020.
« Using vertically separated MIMO in ship-to-ship communications ».
IEEE Access, vol. 8.
pp. 103601-103609.
Abdolmanafi, Atefeh, Cheriet, Farida, Duong, Luc, Ibrahim, Ragui et Dahdah, Nagib.
2020.
« An automatic diagnostic system of coronary artery lesions in Kawasaki disease using intravascular optical coherence tomography imaging ».
Journal of Biophotonics, vol. 13, nº 1.
Abnane, Ibtissam, Idri, Ali et Abran, Alain.
2020.
« Fuzzy case-based-reasoning-based imputation for incomplete data in software engineering repositories ».
Journal of Software: Evolution and Process, vol. 32, nº 9.
Abo El Ezz, Ahmad, Assi, Rola et Zand Miralvand, Tania.
2020.
« Seismic floor acceleration amplification based on instrumented building records ».
Journal of Architectural Engineering, vol. 26, nº 2.
Abou-Rjeily, Chadi et Kaddoum, Georges.
2020.
« Free space optical cooperative communications via an energy harvesting harvest-store-use relay ».
IEEE Transactions on Wireless Communications, vol. 19, nº 10.
pp. 6564-6577.
Ahdab, Ranim E. L., Sharma, Suraj, Nabki, Frederic et Ménard, Michaël.
2020.
« Wide-band silicon photonic MOEMS spectrometer requiring a single photodetector ».
Optics Express, vol. 28, nº 21.
pp. 31345-31359.
Ahmed, M. Zaid, Chadha, K., Reddy, S. R., Shahriari, D., Bhattacharjee, P. P. et Jahazi, M..
2020.
« Influence of process parameters on microstructure evolution during hot deformation of a Eutectic High-Entropy Alloy (EHEA) ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 51, nº 12.
pp. 6406-6420.
Aidibe, Ali, Tahan, Souheil Antoine et Nejad, Mojtaba Kamali.
2020.
« Interlaboratory empirical reproducibility study based on a GD&T benchmark ».
Applied Sciences, vol. 10, nº 14.
Aisha, Tareq Abu, Ouhimmou, Mustapha et Paquet, Marc.
2020.
« Optimization of container terminal layouts in the seaport-case of Port of Montreal ».
Sustainability, vol. 12, nº 3.
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R. et Brochu, M..
2020.
« High cycle fatigue behavior of hard turned 300 M ultra-high strength steel ».
International Journal of Fatigue, vol. 131.
Al Aela, Ahmed Mohamed, Kenné, Jean-Pierre et Mintsa, Honorine Angue.
2020.
« A novel adaptive and nonlinear electrohydraulic active suspension control system with zero dynamic tire liftoff ».
Machines, vol. 8, nº 3.
Aladin, Sandra, Tran, Anh Vu Stephan, Allogba, Stéphanie et Tremblay, Christine.
2020.
« Quality of transmission estimation and short-term performance forecast of lightpaths ».
Journal of Lightwave Technology, vol. 38, nº 10.
pp. 2806-2813.
Alam, Md Sahabul, Selim, Bassant, Kaddoum, Georges et Agba, Basile L..
2020.
« Mitigation techniques for impulsive noise with memory modeled by a two state markov-gaussian process ».
IEEE Systems Journal, vol. 14, nº 3.
pp. 4079-4088.
Alam, Miah, Chaallal, Omar et Galy, Bertrand.
2020.
« Protection practices for trench and excavation in Quebec sensitive clay soils: Review of codes, guidelines, and research needs ».
Safety Science, vol. 131.
Aleyari, Alireza, Majidi, Omid, Bombardier, Nicolas, Pham, Xuan-Tan et Jahazi, Mohammad.
2020.
« Finite element and experimental analysis of the preheating stage of High Speed Blow Forming (HSBF) process ».
Journal of Manufacturing Processes, vol. 49.
pp. 10-17.
Ali, Ghalya, Demers, Vincent, Côté, Raphaël et Demarquette, Nicole R..
2020.
« Threshold concentration of surfactant agent in feedstocks used for low-pressure powder injection molding ».
Materials Performance and Characterization, vol. 9, nº 4.
Ali, Mohamed Mamdouh M., Elsaadany, Mahmoud, Shams, Shoukry I., Sebak, Abdel-Razik et Gagnon, Ghyslain.
2020.
« On the design of broadband rectangular waveguide pressure windows ».
IEEE Transactions on Microwave Theory and Techniques, vol. 68, nº 9.
pp. 3667-3674.
Alinejad, Yasaman, Bitar, Christina M. E., Martinez Villegas, Karina, Perignon, Sarah, Hoesli, Corinne A. et Lerouge, Sophie.
2020.
« Chitosan microbeads produced by one-step scalable stirred emulsification: A promising process for cell therapy applications ».
ACS Biomaterials Science & Engineering, vol. 6, nº 1.
pp. 288-297.
Alizadeh, Vahid, Kessentini, Marouane, Mkaouer, Wiem, Ocinneide, Mel, Ouni, Ali et Cai, Yuanfang.
2020.
« An interactive and dynamic search-based approach to software refactoring recommendations ».
IEEE Transactions on Software Engineering, vol. 46, nº 9.
pp. 932-961.
Alkayyali, Tartela et Ahmadi, Ali.
2020.
« Fabrication of microfluidic chips using controlled dissolution of 3D printed scaffolds ».
Journal of Applied Polymer Science, vol. 137, nº 46.
Alleman, Douglas, Stanford, M. Scott, Papajohn, Dean, Jobidon, Gabriel et Molenaar, Keith R..
2020.
« Characteristics of stipends and their value-adding potential in design-build US highway construction ».
Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, vol. 12, nº 2.
Almarimi, Nuri, Ouni, Ali et Mkaouer, Mohamed Wiem.
2020.
« Learning to detect community smells in open source software projects ».
Knowledge-Based Systems, vol. 204.
p. 15.
Alqaisi, Walid, Ghommam, Jawhar, Alazzam, Anas, Saad, Maarouf et Nerguizian, Vahe.
2020.
« Three-loop uncertainties compensator and sliding mode quadrotor control ».
Computers and Electrical Engineering, vol. 81.
Alqaisi, Walid, Kali, Yassine, Ghommam, Jawhar, Saad, Maarouf et Nerguizian, Vahé.
2020.
« Position and attitude tracking of uncertain quadrotor unmanned aerial vehicles based on non-singular terminal super-twisting algorithm ».
Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, vol. 234, nº 3.
pp. 396-408.
Alrubaye, H., Mkaouer, M. W., Khokhlov, I., Reznik, L., Ouni, A. et McGoff, J..
2020.
« Learning to recommend third-party library migration opportunities at the API level ».
Applied Soft Computing, vol. 90.
Al-Sarayreh, Khalid T., Meridji, Kenza, Abran, Alain et Trudel, Sylvie.
2020.
« System performance requirements: A standards-based model for early identification, allocation to software functions and size measurement ».
E-Informatica Software Engineering Journal, vol. 14, nº 1.
pp. 117-148.
Alzaareer, Khaled, Saad, Maarouf, Asber, Dalal, Lefebvre, Serge et Lenoir, Laurent.
2020.
« Impedance sensitivity-based corrective method for online voltage control in smart distribution grids ».
Electric Power Systems Research, vol. 181.
Alzaareer, Khaled, Saad, Maarouf, Mehrjerdi, Hasan, Asber, Dalal et Lefebvre, Serge.
2020.
« Development of new identification method for global group of controls for online coordinated voltage control in active distribution networks ».
IEEE Transactions on Smart Grid, vol. 11, nº 5.
pp. 3921-3931.
Alzaareer, Khaled, Saad, Maarouf, Mehrjerdi, Hasan, Ziad El-Bayeh, Claude, Asber, Dalal et Lefebvre, Serge.
2020.
« A new sensitivity approach for preventive control selection in real-time voltage stability assessment ».
International Journal of Electrical Power and Energy Systems, vol. 122.
Amarasinghe, Gayashan, de Assuncao, Marcos D., Harwood, Aaron et Karunasekera, Shanika.
2020.
« ECSNeT++: A simulator for distributed stream processing on edge and cloud environments ».
Future Generation Computer Systems, vol. 111.
pp. 401-418.
Amhadi, Talal S. et Assaf, Gabriel J..
2020.
« Strength and permeability potentials of cement-modified desert sand for roads construction purpose ».
Innovative Infrastructure Solutions, vol. 5, nº 3.
Amirkhan, F., Robichaud, A., Ropagnol, X., Gratuze, M., Ozaki, T., Nabki, F. et Blanchard, F..
2020.
« Active terahertz time differentiator using piezoelectric micromachined ultrasonic transducer array ».
Optics Letters, vol. 45, nº 13.
pp. 3589-3592.
Ammar, Amira, Kanaan, Hadi Y., Moubayed, Nazih, Hamouda, Mahmoud et Al-Haddad, Kamal.
2020.
« Original approach toward three-phase indirect matrix converters through hybrid PWM modulation and DSP implementation ».
IEEE Access, vol. 8.
pp. 45837-45852.
Anagonou, Augias, Godjo, Thierry, Songmene, Victor et Tankpinou, Yvette.
2020.
« Étude des propriétés physico-mécaniques d’un béton hydraulique contenant des cendres de coques d’anacarde de tailles micrométriques et nanométriques substituant partiellement le ciment ».
Déchets Sciences et Techniques, nº 83.
pp. 39-48.
Anagonou, Augias, Songmene, Victor, Godjo, Thierry et Kouam, Jules.
2020.
« Recycling of West african cashew nut shells waste in asphalt concrete: Impact on the physico-mechanical properties of asphalt concrete ».
International Journal of Advanced Research and Publications, vol. 4, nº 2.
pp. 96-106.
Arab, Naima, Vahedi, Hani et Al-Haddad, Kamal.
2020.
« LQR control of single-phase grid-tied PUC5 inverter with LCL filter ».
IEEE Transactions on Industrial Electronics, vol. 67, nº 1.
pp. 297-307.
Arazm, Saeed et Al-Haddad, Kamal.
2020.
« ZPUC: a new configuration of single DC source for modular multilevel converter applications ».
IEEE Open Journal of the Industrial Electronics Society, vol. 1.
pp. 97-113.
Ardila, Fabian et Francis, Adel.
2020.
« Spatiotemporal planning of construction projects: A literature review and assessment of the state of the art ».
Frontiers in Built Environment, vol. 6.
Arikawa, T., Hiraoka, T., Morimoto, S., Blanchard, F., Tani, S., Tanaka, T., Sakai, K., Kitajima, H., Sasaki, K., Tanaka, K. et Tanaka, K..
2020.
« Transfer of orbital angular momentum of light to plasmonic excitations in metamaterials ».
Science Advances, vol. 6, nº 24.
Arisdakessian, Sarhad, Wahab, Omar Abdel, Mourad, Azzam, Otrok, Hadi et Kara, Nadjia.
2020.
« FoGMatch: an intelligent multi-criteria IoT-Fog scheduling approach using game theory ».
IEEE/ACM Transactions on Networking, vol. 28, nº 4.
pp. 1779-1789.
Armentia, Mikel, Abasolo, Mikel, Coria, Ibai et Bouzid, Abdel-Hakim.
2020.
« On the use of a simplified slip limit equation to predict screw self-loosening of dental implants subjected to external cycling loading ».
Applied Sciences, vol. 10, nº 19.
Arsenault, Richard, Brissette, François, Chen, Jie, Guo, Qiang et Dallaire, Gabrielle.
2020.
« NAC2H: The North American climate change and hydroclimatology data set ».
Water Resources Research, vol. 56, nº 8.
Arsenault, Richard, Brissette, François, Martel, Jean-Luc, Troin, Magali, Lévesque, Guillaume, Davidson-Chaput, Jonathan, Gonzalez, Mariana Castañeda, Ameli, Ali et Poulin, Annie.
2020.
« A comprehensive, multisource database for hydrometeorological modeling of 14,425 North American watersheds ».
Scientific Data, vol. 7, nº 1.
Arunachalam, Shivaram, Izquierdo, Ricardo et Nabki, Frederic.
2020.
« Ionization gas sensor using suspended carbon nanotube beams ».
Sensors, vol. 20, nº 6.
Assid, M., Gharbi, A. et Hajji, A..
2020.
« Production and subcontracting control for an unreliable manufacturing system with setups ».
International Journal of Production Research, vol. 58, nº 12.
pp. 3570-3588.
Assid, M., Gharbi, A. et Hajji, A..
2020.
« Production control of failure-prone manufacturing-remanufacturing systems using mixed dedicated and shared facilities ».
International Journal of Production Economics, vol. 224.
Assumpcao Silva, Ronan, Britto, Alceu S., Enembreck, Fabricio, Sabourin, Robert et Oliveira, Luiz S..
2020.
« Selecting and combining classifiers based on centrality measures ».
International Journal on Artificial Intelligence Tools, vol. 29, nº 3-4.
Assunção, Wesley K.G., Vergilio, Silvia R. et Lopez-Herrejon, Roberto E..
2020.
« Automatic extraction of product line architecture and feature models from UML class diagram variants ».
Information and Software Technology, vol. 117.
Asuo, Ivy M., Gedamu, Dawit, Doumon, Nutifafa Y., Ka, Ibrahima, Pignolet, Alain, Cloutier, Sylvain G. et Nechache, Riad.
2020.
« Ambient condition-processing strategy for improved air-stability and efficiency in mixed-cation perovskite solar cells ».
Materials Advances, vol. 1, nº 6.
pp. 1866-1876.
Atia, Hela, Ilinca, Adrian, Snoussi, Ali, Boukchina, Rachid et Ben Brahim, Ammar.
2020.
« Comparative energetic and exergetic analysis of conventional and sloped solar chimney power plants ».
International Journal of Energy Optimization and Engineering (IJEOE), vol. 9, nº 4.
pp. 57-73.
Attia, Maroua Ben, Nguyen, Kim Khoa et Cheriet, Mohamed.
2020.
« Dynamic QoS-aware scheduling for concurrent traffic in smart home ».
IEEE Internet of Things Journal, vol. 7, nº 6.
pp. 5412-5425.
Augas, Julien, Abbasnezhadi, Kian, Rousseau, Alain N. et Baraer, Michel.
2020.
« What is the trade-off between snowpack stratification and simulated snow water equivalent in a physically-based snow model? ».
Water, vol. 12, nº 12.
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Zhao, Zijian.
2020.
« Leakage estimate in nonuniformly compressed packing rings ».
Journal of Nuclear Engineering and Radiation Science, vol. 6, nº 2.
Ayache, Khedidja, Chandra, Ambrish et Cheriti, Ahmed.
2020.
« An embedded reconfiguration for reliability enhancement of photovoltaic shaded panels against hot spots ».
IEEE Transactions on Industry Applications, vol. 56, nº 2.
pp. 1815-1826.
Aydin, Umit, Pellegrino, Giovanni, Ali, Obai Bin Ka'b, Abdallah, Chifaou, Dubeau, Francois, Lina, Jean-Marc, Kobayashi, Eliane et Grova, Christophe.
2020.
« Magnetoencephalography resting state connectivity patterns as indicatives of surgical outcome in epilepsy patients ».
Journal of Neural Engineering, vol. 17, nº 3.
Azizi, Sohrab, Momen, Gelareh, Ouellet-Plamondon, Claudiane et David, Eric.
2020.
« Enhancement in electrical and thermal performance of high-temperature vulcanized silicone rubber composites for outdoor insulating applications ».
Journal of Applied Polymer Science, vol. 137, nº 46.
Azizi, Sohrab, Momen, Gelareh, Ouellet-Plamondon, Claudiane et David, Eric.
2020.
« Performance improvement of EPDM and EPDM/Silicone rubber composites using modified fumed silica, titanium dioxide and graphene additives ».
Polymer Testing, vol. 84.
Babanezhad, Kaveh, Aidibe, Ali, Foucault, Gilles, Tahan, Antoine et Bigeon, Jean.
2020.
« Improved Bi-Criterion flexible registration for fixtureless inspection of compliant parts ».
Precision Engineering, vol. 65.
pp. 116-129.
Bag, Amrita, Delbergue, Dorian, Ajaja, Jihane, Bocher, Philippe, Lévesque, Martin et Brochu, Myriam.
2020.
« Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes ».
International Journal of Fatigue, vol. 130.
Bahloul, Dorra et Kouki, Ammar B..
2020.
« LTCC-Based fluidic tuners for low microwave frequency reconfigurable circuits ».
IEEE Transactions on Microwave Theory and Techniques, vol. 68, nº 8.
pp. 3308-3317.
Bailly, Nicolas, Diotalevi, Lucien, Beausejour, Marie-Helene, Wagnac, Eric, Mac-Thiong, Jean-Marc et Petit, Yvan.
2020.
« Numerical investigation of the relative effect of disc bulging and ligamentum flavum hypertrophy on the mechanism of central cord syndrome ».
Clinical Biomechanics, vol. 74.
pp. 58-65.
Bailly, Nicolas, Petit, Yvan, Desrosier, Jean-Michel, Laperriere, Olivier, Langlois, Simon et Wagnac, Eric.
2020.
« Strain rate dependent behavior of vinyl nitrile helmet foam in compression and combined compression and shear ».
Applied Sciences, vol. 10, nº 22.
Bali, Ahmed, Al-Osta, Mahmud, Ben Dahsen, Soufiene et Gherbi, Abdelouahed.
2020.
« Rule based auto-scalability of IoT services for efficient edge device resource utilization ».
Journal of Ambient Intelligence and Humanized Computing, vol. 11.
pp. 5895-5912.
Banerjee, Debika, Asuo, Ivy M., Pignolet, Alain, Nechache, Riad et Cloutier, Sylvain G..
2020.
« High performance photodetectors using porous silicon-TiO2 heterostructure ».
Engineering Research Express, vol. 2, nº 3.
Banerjee, Debika, Guo, Xiaohang, Benavides, Jaime, Rameau, Bruno et Cloutier, Sylvain G..
2020.
« Designing green self-healing anticorrosion conductive smart coating for metal protection ».
Smart Materials and Structures, vol. 29, nº 10.
Bany Taha, Mohammad, Ould-Slimane, Hakima et Talhi, Chamseddine.
2020.
« Smart offloading technique for CP-ABE encryption schemes in constrained devices ».
SN Applied Sciences, vol. 2, nº 2.
Barakat, Rabih, Nerguizian, Vahe, Hammou, Djilali et Tatu, Serioja Ovidiu.
2020.
« Modified ring power divider using stepped-impedance resonator ».
Journal of Microwaves, Optoelectronics and Electromagnetic Applications, vol. 19, nº 1.
pp. 26-38.
Basdogan, Cagatay, Giraud, Frederic, Lévesque, Vincent et Choi, Seungmoon.
2020.
« A review of surface haptics: Enabling tactile effects on touch surfaces ».
IEEE Transactions on Haptics, vol. 13, nº 3.
pp. 450-470.
Bastidas-Rodriguez, Marìa X., Polania, Luisa, Gruson, Adrien et Prieto-Ortiz, Flavio.
2020.
« Deep Learning for fractographic classification in metallic materials ».
Engineering Failure Analysis, vol. 113.
Bayati, Abdolkhalegh, Nguyen, Kim-Khoa et Cheriet, Mohamed.
2020.
« Gaussian process regression ensemble model for network traffic prediction ».
IEEE Access, vol. 8.
pp. 176540-176554.
Beauséjour, Marie-Hélène, Petit, Yvan, Hagen, Jeremy, Arnoux, Pierre-Jean, Thiong, Jean-Marc Mac et Wagnac, Eric.
2020.
« Contribution of injured posterior ligamentous complex and intervertebral disc on post-traumatic instability at the cervical spine ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 23, nº 12.
pp. 832-843.
Bédard, Frédéric, Jahazi, Mohammad et Songmene, Victor.
2020.
« Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics ».
International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2.
pp. 333-342.
Beji, Chihebedine, Merabtine, Abdelatif, Mokraoui, Salim, Kheiri, Abdelhamid, Kauffmann, Julien et Bouaziz, Nahla.
2020.
« Experimental study on the effects of direct sun radiation on the dynamic thermal behavior of a floor-heating system ».
Solar Energy, vol. 204.
pp. 1-12.
Bélanger, Jacky, Dessaint, Louis A. et Kamwa, Innocent.
2020.
« An extended optimal transmission switching algorithm adapted for large networks and hydro-electric context ».
IEEE Access, vol. 8.
pp. 87762-87774.
Beloin-Saint-Pierre, Didier, Albers, Ariane, Helias, Arnaud, Tiruta-Barna, Ligia, Fantke, Peter, Levasseur, Annie, Benetto, Enrico, Benoist, Anthony et Collet, Pierre.
2020.
« Addressing temporal considerations in life cycle assessment ».
Science of the Total Environment, vol. 743.
Ben Mosbah, Abdallah, Botez, Ruxandra Mihaela, Medini, Soumaya et Dao, Thien-My.
2020.
« Artificial neural networks-extended great deluge model to predict actuators displacements for a morphing wing tip system ».
INCAS Bulletin, vol. 12, nº 4.
pp. 13-24.
Ben Trad, Mohamed Aziz, Demers, Vincent, Côté, Raphaël, Sardarian, Mehran et Dufresne, Louis.
2020.
« Numerical simulation and experimental investigation of mold filling and segregation in low-pressure powder injection molding of metallic feedstock ».
Advanced Powder Technology, vol. 31, nº 3.
pp. 1349-1358.
Benasla, Amel et Hausler, Robert.
2020.
« Growth and production of lipids in raphidocelis subcapitata immobilized in sodium alginate beads ».
Energies, vol. 13, nº 2.
Benevides, Rodrigo, Ménard, Michaël, Wiederhecker, Gustavo S. et Alegre, Thiago P. Mayer.
2020.
« Ar/Cl2 etching of GaAs optomechanical microdisks fabricated with positive electroresist ».
Optical Materials Express, vol. 10, nº 1.
pp. 57-67.
Benmakrelouf, Souhila, St-Onge, Cédric, Kara, Nadjia, Tout, Hanine, Edstrom, Claes et Lemieux, Yves.
2020.
« Abnormal behavior detection using resource level to service level metrics mapping in virtualized systems ».
Future Generation Computer Systems, vol. 102.
pp. 680-700.
Benrachi, Naoufel, Ouzzane, Mohamed, Smaili, Arezki, Lamarche, Louis, Badache, Messaoud et Maref, Wahid.
2020.
« Numerical parametric study of a new earth-air heat exchanger configuration designed for hot and arid climates ».
International Journal of Green Energy, vol. 17, nº 2.
pp. 115-126.
Bensalem, Hachem, Blaquière, Yves et Savaria, Yvon.
2020.
« In-FPGA instrumentation framework for OpenCL-Based designs ».
IEEE Access, vol. 8.
pp. 212979-212994.
Bensalma, Fatima, Richardson, Glen, Ouakrim, Youssef, Fuentes, Alexandre, Dunbar, Michael, Hagemeister, Nicola et Mezghani, Neila.
2020.
« A combined visualization method for multivariate data analysis. Application to knee kinematic and clinical parameters relationships ».
Applied Sciences, vol. 10, nº 5.
Benzeguir, Zine El Abidine, El-Saikaly, Georges et Chaallal, Omar.
2020.
« Size effect of RC T-Beams strengthened in shear with externally bonded CFRP L-Shaped laminates ».
Journal of Composites for Construction, vol. 24, nº 4.
Benzerrouk, Hamza, Nebylov, Vladimir, Nebylov, Alexander et Landry, René Jr.
2020.
« Spacecraft INS/CNS/Pulsar integrated Positioning Navigation and Timing ».
[Article de conférence]. IFAC-PapersOnLine, vol. 53, nº 2.
pp. 14912-14917.
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2020.
« Reproducibility investigation of elicitation techniques in risk assessment for hydraulic turbines ».
Journal of Risk Research, vol. 23, nº 3.
pp. 297-312.
Berger, Maxitne, Kocar, Ilhan, Fortin-Blanchette, Handy et Lavertu, Carl.
2020.
« Open-phase fault-tolerant operation of the three-phase dual active bridge converter ».
IEEE Transactions on Power Electronics, vol. 35, nº 4.
pp. 3651-3662.
Berghout, Belkacem et Forgues, Daniel.
2020.
« Passive ambient comfort and the interaction of vernacular strategies and devices in arid zone habitat design: case of Biskra, Algeria ».
Advances in Building Energy Research, vol. 14, nº 2.
pp. 277-304.
Berrima, Safa, Blaquière, Yves et Savaria, Yvon.
2020.
« Fine resolution delay tuning method to improve the linearity of an unbalanced time-to-digital converter on a Xilinx FPGA ».
IET Circuits, Devices and Systems, vol. 14, nº 8.
pp. 1243-1252.
Bettouche, Y., Obeidat, H. A., Agba, B. L., Kouki, A. B., Mosleh, M. F., Al Abdullah, A. M. et Abd-Alhameed, R. A..
2020.
« Comparison of surface radio refractivity variability in the northern and southern parts of Quebec, Canada ».
Radio Science, vol. 55, nº 7.
Bettouche, Yamina, Agba, Basile, Kouki, Ammar, Obeidat, Huthaifa, Alabdullah, Ali, Abdussalam, Fathi, Ghauri, Sabir et Abd-Alhameed, Raed.
2020.
« Estimation and analysis of the radio refractivity, its gradient and the geoclimatic factor in Arctic regions ».
Progress in Electromagnetics Research M, vol. 92.
pp. 181-192.
Bettouche, Yamina, Agba, Basile, Kouki, Ammar, Obeidat, Huthaifa, Alhassan, Haru, AlAbdullah, Ali, Rodriguez, Jonathan et Abd-Alhameed, Raed.
2020.
« Determination of areas for surface refractivity variation analysis over Quebec ».
Journal of Atmospheric and Solar-Terrestrial Physics, vol. 208.
Bhatnagar, Sahir R., Yang, Yi, Lu, Tianyuan, Schurr, Erwin, Loredo-Osti, J. C., Forest, Marie, Oualkacha, Karim et Greenwood, Celia M. T..
2020.
« Simultaneous SNP selection and adjustment for population structure in high dimensional prediction models ».
Plos Genetics, vol. 16, nº 5.
Billerot, Pierre-Lou, Dufresne, Louis, Lemaire, Romain et Seers, Patrice.
2020.
« 3D CFD analysis of a diamond lattice-based porous burner ».
Energy, vol. 207.
Bleichner, Martin G., Kidmose, Preben et Voix, Jérémie.
2020.
« Editorial: Ear-centered sensing: From sensing principles to research and clinical devices ».
[Éditorial]. Frontiers in Neuroscience, vol. 13.
Boivin, Guillaume, Bélanger, Pierre et Zednik, Ricardo J..
2020.
« Characterization of pure face-shear strain in piezoelectric alpha-tellurium dioxide (alpha-TeO2) ».
Crystals, vol. 10, nº 10.
Bomyea, J., Simmons, A. N., Shenton, M. E., Coleman, M. J., Bouix, S., Rathi, Y., Pasternak, O., Coimbra, R., Shutter, L., George, M. S., Grant, G., Zafonte, R. D., McAllister, T. W. et Stein, M. B..
2020.
« Neurocognitive markers of childhood abuse in individuals with PTSD: Findings from the INTRuST Clinical Consortium ».
Journal of Psychiatric Research, vol. 121.
pp. 108-117.
Bonnet, Fabien, Nélisse, Hugues, Nogarolli, Marcos A.C. et Voix, Jérémie.
2020.
« Individual in-situ calibration of in-ear noise dosimeters ».
Applied Acoustics, vol. 157.
Boton, Conrad.
2020.
« Remote teaching of building information modeling during the COVID-19 pandemic: A case study ».
Sustainability, vol. 12, nº 20.
Boton, Conrad, St-Pierre, Éric et Lefebvre, Gabriel.
2020.
« Should medium-sized contractors still implement home-made information technologies on construction sites? ».
Frontiers of Engineering Management, vol. 7, nº 1.
pp. 142-158.
Bouchard, Maude, Lina, Jean-Marc, Gaudreault, Pierre-Olivier, Dubé, Jonathan, Gosselin, Nadia et Carrier, Julie.
2020.
« EEG connectivity across sleep cycles and age ».
Sleep, vol. 43, nº 3.
Bouchard-Roy, Jacob, Delnavaz, Aidin et Voix, Jérémie.
2020.
« In-ear energy harvesting: Evaluation of the power capability of the temporomandibular joint ».
IEEE Sensors Journal, vol. 20, nº 12.
pp. 6338-6345.
Bouchard-Roy, Jacob, Delnavaz, Aidin et Voix, Jérémie.
2020.
« Mobile in-ear power sensor for jaw joint activity ».
Micromachines, vol. 11, nº 12.
Bouissa, Y., Bohlooli, N., Shahriari, D., Champliaud, H., Morin, J. B. et Jahazi, M..
2020.
« FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ».
Journal of Manufacturing Processes, vol. 58.
pp. 592-605.
Boujia, Nissrine, Schmidt, Franziska, Chevalier, Christophe, Siegert, Dominique et Bang, Damien Pham Van.
2020.
« Distributed optical fiber-based approach for soil–structure interaction ».
Sensors, vol. 20, nº 1.
Bouktif, Salah, Fiaz, Ali, Ouni, Ali et Serhani, Mohamed Adel.
2020.
« Multi-sequence LSTM-RNN deep learning and metaheuristics for electric load forecasting ».
Energies, vol. 13, nº 2.
Boussard, Vivien, Coulombe, Stéphane, Coudoux, Francois-Xavier et Corlay, Patrick.
2020.
« Table-free multiple bit-error correction using the CRC syndrome ».
IEEE Access, vol. 8.
pp. 102357-102372.
Brahmi, Brahim, Laraki, Mohamed Hamza, Brahmi, Abdelkrim, Saad, Maarouf et Rahman, Mohammad H..
2020.
« Improvement of sliding mode controller by using a new adaptive reaching law: theory and experiment ».
ISA Transactions, vol. 97.
pp. 261-268.
Brahmi, Brahim, Saad, Maarouf, Rahman, Mohammad H. et Brahmi, Abdelkrim.
2020.
« Adaptive force and position control based on quasi-time delay estimation of exoskeleton robot for rehabilitation ».
IEEE Transactions on Control Systems Technology, vol. 28, nº 6.
pp. 2152-2163.
Brailovski, Vladimir, Kalinicheva, Victoria, Letenneur, Morgan, Lukashevich, Konstantin, Sheremetyev, Vadim et Prokoshkin, Sergey.
2020.
« Control of density and grain structure of a laser powder bed-fused superelastic Ti-18Zr-14Nb alloy: Simulation-driven process mapping ».
Metals, vol. 10, nº 12.
Bretin, R., Levesque, M., Pilvin, P. et Bocher, P..
2020.
« Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element ».
International Journal of Fatigue, vol. 137.
Brignol, A., Gueziri, H. E., Cheriet, F., Collins, D. L. et Laporte, C..
2020.
« Automatic extraction of vertebral landmarks from ultrasound images: A pilot study ».
Computers in Biology and Medicine, vol. 122.
Brika, Salah Eddine et Brailovski, Vladimir.
2020.
« Influence of Powder Particle Morphology on the Static and Fatigue Properties of Laser Powder Bed-Fused Ti-6Al-4V Components ».
Journal of Manufacturing and Materials Processing, vol. 4, nº 4.
Brika, Salah Eddine, Letenneur, Morgan, Dion, Christopher Alex et Brailovski, Vladimir.
2020.
« Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy ».
Additive Manufacturing, vol. 31.
Brisebois, Patrick P., Izquierdo, Ricardo et Siaj, Mohamed.
2020.
« Room-temperature reduction of graphene oxide in water by metal chloride hydrates: A cleaner approach for the preparation of graphene@metal hybrids ».
Nanomaterials, vol. 10, nº 7.
Brooke, Daniel C., Umnova, Olga, Leclaire, Philippe et Dupont, Thomas.
2020.
« Acoustic metamaterial for low frequency sound absorption in linear and nonlinear regimes ».
Journal of Sound and Vibration, vol. 485.
Brulatout, Jonathan, Garnier, François et Seers, Patrice.
2020.
« Interaction between a diesel-fuel spray and entrained air with single- and double-injection strategies using large eddy simulations ».
Propulsion and Power Research, vol. 9, nº 1.
pp. 37-50.
Butler, Haley M., Naseri, Emad, MacDonald, Debra S., Tasker, R. Andrew et Ahmadi, Ali.
2020.
« Optimization of starch- and chitosan-based bio-inks for 3D bioprinting of scaffolds for neural cell growth ».
Materialia, vol. 12.
Caetano da Silva, Alisson, da Silva, Dione Luiza et Melhado, Silvio Burrattino.
2020.
« O processo de compatibilização na gestão de projetos – Estudo de caso ».
Revista de Engenharia e Pesquisa Aplicada, vol. 5, nº 3.
pp. 40-46.
Cagnin, A., Bazan, M., Pontbriand, R., Choiniere, M. et Hagemeister, N..
2020.
« Impact of pain suppression on three-dimensional gait kinematics in knee osteoarthritis patients ».
[Résumé d'une communication à une conférence]. Osteoarthritis and Cartilage, vol. 28.
S233-S234.
Cagnin, A., Choiniere, M., Bureau, N. J., Durand, M., Mezghani, N., Gaudreault, N. et Hagemeister, N..
2020.
« Impact of a personalized care approach on 3d gait impairments in knee osteoarthritis patients (a cluster randomized controlled trial) ».
[Résumé d'une communication à une conférence]. Osteoarthritis and Cartilage, vol. 28.
S25.
Cagnin, A., Choiniere, M., Bureau, N. J., Eriau, N. et Hagemeister, N..
2020.
« Flexion contracture in knee osteoarthritis patients is not indicative of flexion/extension impairments during gait ».
[Résumé d'une communication à une conférence]. Osteoarthritis and Cartilage, vol. 28.
S241-S242.
Cagnin, Alix, Choinière, Manon, Bureau, Nathalie J., Durand, Madeleine, Mezghani, Neila, Gaudreault, Nathaly et Hagemeister, Nicola.
2020.
« A multi-arm cluster randomized clinical trial of the use of knee kinesiography in the management of osteoarthritis patients in a primary care setting ».
Postgraduate Medicine, vol. 132, nº 1.
pp. 91-101.
Cameron, Tiffany, Naseri, Emad, MacCallum, Ben et Ahmadi, Ali.
2020.
« Development of a disposable single-nozzle printhead for 3D bioprinting of continuous multi-material constructs ».
Micromachines, vol. 11, nº 5.
Carbonneau, Marc-André, Granger, Eric, Attabi, Yazid et Gagnon, Ghyslain.
2020.
« Feature learning from spectrograms for assessment of personality traits ».
IEEE Transactions on Affective Computing, vol. 11, nº 1.
pp. 25-31.
Carillo, Kévin, Doutres, Olivier et Sgard, Franck.
2020.
« A finite element model to study the earplug contribution to the objective occlusion effect ».
[Résumé d'une communication à une conférence]. The Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2781.
Carillo, Kévin, Doutres, Olivier et Sgard, Franck.
2020.
« Theoretical investigation of the low frequency fundamental mechanism of the objective occlusion effect induced by bone-conducted stimulation ».
The Journal of the Acoustical Society of America, vol. 147, nº 5.
pp. 3476-3489.
Carneiro, Thiago Bruno, Rodrigues, Samuel Filgueiras, Aranas, Clodualdo, Siciliano, Fulvio, Silva, Eden Santos, Reis, Gedeon Silva, Miranda, Edson Jansen Pedrosa, Leal, Valdemar Silva, Jahazi, Mohammad et Jonas, John Joseph.
2020.
« Retransformation of dynamically induced ferrite during physical simulation of Steckel mill hot rolling ».
Journal of Materials Research and Technology, vol. 9, nº 5.
pp. 10254-10264.
Carret, Jean-Claude, Di Benedetto, Herve et Sauzeat, Cedric.
2020.
« Linear viscoelastic behavior of asphalt mixes from dynamic frequency response functions ».
International Journal for Numerical and Analytical Methods in Geomechanics, vol. 44, nº 7.
pp. 1019-1031.
Carvalho, Vinícius L., Safieddine, Camila, Demarquette, Nicole R. et Pinheiro, Luís A..
2020.
« In situ compatibilization of a polyethylene, polypropylene, and polystyrene ternary blend through Friedel-Crafts alkylation ».
Journal of Applied Polymer Science, vol. 137, nº 3.
Cauchon, Anne-Marie, Tétreault, Patrice, Bascans, Clarisse, Skalli, Wafa et Hagemeister, Nicola.
2020.
« Morphologic and radiologic parameters correlating to shoulder function at diagnosis for patients with rotator cuff tear ».
Journal of Shoulder and Elbow Surgery, vol. 29, nº 11.
pp. 2272-2281.
Chaddad, Ahmad, Kucharczyk, Michael J., Desrosiers, Christian, Okuwobi, Idowu Paul, Katib, Yousef, Zhang, Mingli, Rathore, Saima, Sargos, Paul et Niazi, Tamim.
2020.
« Deep radiomic analysis to predict gleason score in prostate cancer ».
IEEE Access, vol. 8.
pp. 167767-167778.
Chadha, K., Aranas, C., Shahriari, D., Jahazi, M. et Spray, J. G..
2020.
« The effect of retained work hardening on the driving force for dynamic transformation ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 51, nº 11.
pp. 5617-5622.
Chadha, Kanwal, Tian, Yuan, Bocher, Philippe, Spray, John G. et Aranas, Clodualdo.
2020.
« Microstructure evolution, mechanical properties and deformation behavior of an additively manufactured maraging steel ».
Materials, vol. 13, nº 10.
Chaghazardi, Zahra, Hof, Lucas et Wuthrich, Rolf.
2020.
« Electropolishing of inside surfaces of stainless steel tubing ».
ECS Transactions, vol. 97, nº 7.
pp. 523-536.
Chai, Xin, Ropagnol, Xavier, Mora, Luis Sanchez, Raeiszadeh, S. Mohsen, Safavi-Naeini, Saffiedin, Blanchard, François et Ozaki, Tsuneyuki.
2020.
« Stokes–Mueller method for comprehensive characterization of coherent terahertz waves ».
Scientific Reports, vol. 10, nº 1.
Chaieb, Oussama, Olufayo, Oluwole A., Songmene, Victor et Jahazi, Mohammad.
2020.
« Investigation on surface quality of a rapidly solidified Al–50%Si alloy component for deep-space applications ».
Materials, vol. 13, nº 15.
Chakraborty, Tulika, Chauhan, Satyaveer S. et Ouhimmou, Mustapha.
2020.
« Mitigating supply disruption with a backup supplier under uncertain demand: competition vs. cooperation ».
International Journal of Production Research, vol. 58, nº 12.
pp. 3618-3649.
Chakravorty, Tanushri, Bilodeau, Guillaume-Alexandre et Granger, Éric.
2020.
« Robust face tracking using multiple appearance models and graph relational learning ».
Machine Vision and Applications, vol. 31, nº 4.
Chamanfar, A., Chentouf, S. M., Jahazi, M. et Lapierre-Boire, L. P..
2020.
« Austenite grain growth and hot deformation behavior in a medium carbon low alloy steel ».
Journal of Materials Research and Technology, vol. 9, nº 6.
pp. 12102-12114.
Champagne, Olivier et Pham, Xuan-Tan.
2020.
« Numerical simulation of moving heat source in arc welding using the Element-free Galerkin method with experimental validation and numerical study ».
International Journal of Heat and Mass Transfer, vol. 154.
Charfi, Mohamed Ali, Mathieu, Ronan, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane et Lebrun, Gilbert.
2020.
« Effect of graphene additive on flexural and interlaminar shear strength properties of carbon fiber-reinforced polymer composite ».
Journal of Composites Science, vol. 4, nº 4.
Charrier, Malo et Ouellet-Plamondon, Claudiane.
2020.
« Testing procedures on materials to formulate the ink for 3D printing ».
Transportation Research Record, vol. 2674, nº 2.
pp. 21-32.
Chatenet, Quentin, Gagnon, Martin, Remy, Emmanuel, Fouladirad, Mitra et Tahan, Antoine.
2020.
« Stochastic modeling of cavitation erosion in francis runner ».
International Journal of Fluid Machinery and Systems, vol. 13, nº 1.
pp. 21-29.
Chauvin, Laurent, Kumar, Kuldeep, Wachinger, Christian, Vangel, Marc, de Guise, Jacques, Desrosiers, Christian, Wells, William et Toews, Matthew.
2020.
« Neuroimage signature from salient keypoints is highly specific to individuals and shared by close relatives ».
NeuroImage, vol. 204.
Che, Yuxuan, Zhang, Yuliang, Yang, Yali, Liu, Cheng-Hao, Izquierdo, Ricardo, Xiao, Steven Shuyong et Perepichka, Dmitrii F..
2020.
« Understanding the photovoltaic behavior of A-D-A molecular semiconductors through a permutation of end groups ».
Journal of Organic Chemistry, vol. 85, nº 1.
pp. 52-61.
Chegini, M., Aboutalebi, M. R., Seyedein, S. H., Ebrahimi, G. R. et Jahazi, M..
2020.
« Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map ».
Journal of Manufacturing Processes, vol. 56.
pp. 916-927.
Chen, C. M., Sinclair, L. E., Fortin, R., Coyle, M. et Samson, C..
2020.
« In-flight performance of the Advanced Radiation Detector for UAV Operations (ARDUO) ».
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 954.
Chen, Jie, Brissette, François P. et Caya, Daniel.
2020.
« Remaining error sources in bias-corrected climate model outputs ».
Climatic Change, vol. 162, nº 2.
pp. 563-582.
Chen, Zhangsen, Zhang, Gaixia, Du, Lei, Zheng, Yi, Sun, Lixian et Sun, Shuhui.
2020.
« Nanostructured cobalt-based electrocatalysts for CO2 reduction: Recent progress, challenges, and perspectives ».
Small, vol. 16, nº 52.
Cherchelanov, Edelvays et Bonev, Ilian A..
2020.
« A novel three-legged 6-dof parallel robot with simple kinematics ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 44, nº 4.
pp. 558-565.
Chesnokova, A., Baraër, M., Laperrière-Robillard, T. et Huh, K..
2020.
« Linking mountain glacier retreat and hydrological changes in Southwestern Yukon ».
Water Resources Research, vol. 56, nº 1.
Chesnokova, Anna, Baraër, Michel et Bouchard, Émilie.
2020.
« Proglacial icings as records of winter hydrological processes ».
Cryosphere, vol. 14, nº 11.
pp. 4145-4164.
Choi, Perry S., Nam, Hannah H., Lasso, Andras, Herz, Christian, Drouin, Simon, Harrild, David M., Quartermain, Michael, Fichtinger, Gabor, Mascio, Christopher E., Emani, Sitaram et Jolley, Matthew A..
2020.
« Three-dimensional modeling of surgically implanted stent-based valves in the mitral position in children ».
The Annals of Thoracic Surgery, vol. 110, nº 2.
pp. 670-675.
Clemm, Alexander, Zhani, Mohamed Faten et Boutaba, Raouf.
2020.
« Network management 2030: Operations and control of network 2030 services ».
Journal of Network and Systems Management, vol. 28, nº 4.
pp. 721-750.
Comlan Fannou, Jean-Louis, Doko, Kouandété Valéry, Prodjinonto, Vincent, Lamarche, Louis, Kajl, Stanislaw, Degan, Gérard et Sanya, Emile A..
2020.
« Modeling of a condenser in dynamic operation using comsol multiphysics software ».
Physical Science International Journal, vol. 24, nº 8.
pp. 11-28.
Communier, David, Botez, Ruxandra Mihaela et Wong, Tony.
2020.
« Design and validation of a new morphing camber system by testing in the price-païdoussis subsonic wind tunnel ».
Aerospace, vol. 7, nº 3.
Constant, Caroline, Nichols, Sylvain, Wagnac, Éric, Petit, Yvan, Desrochers, André et Braïlovski, Vladimir.
2020.
« Biocompatibility and mechanical stability of Nitinol as biomaterial for intra-articular prosthetic devices ».
Materialia, vol. 9.
Cordier, Florian, Tassi, Pablo, Claude, Nicolas, Crosato, Alessandra, Rodrigues, Stéphane et Pham Van Bang, Damien.
2020.
« Bar pattern and sediment sorting in a channel contraction/expansion area: Application to the Loire River at Bréhémont (France) ».
Advances in Water Resources, vol. 140.
Coulombe, Frédéric, Rousse, Daniel R. et Paradis, Pierre-Luc.
2020.
« CFD simulations to improve air distribution inside cold climate broiler houses involving heat exchangers ».
Biosystems Engineering, vol. 198.
pp. 105-118.
Cruz, Rafael M. O., Hafemann, Luiz G., Sabourin, Robert et Cavalcanti, George D. C..
2020.
« DESlib: A dynamic ensemble selection library in python ».
Journal of Machine Learning Research, vol. 21.
Dagdeviren, Omur E., Acikgoz, Ogulcan, Grutter, Peter et Baykara, Mehmet Z..
2020.
« Direct imaging, three-dimensional interaction spectroscopy, and friction anisotropy of atomic-scale ripples on MoS2 ».
npj 2D Materials and Applications, vol. 4, nº 1.
Dagdeviren, Omur E., Mascaro, Aaron, Yuan, Shuaishuai, Shirani, Javad, Bevan, Kirk H. et Grutter, Peter.
2020.
« Ergodic and nonergodic dynamics of oxygen vacancy migration at the nanoscale in inorganic perovskites ».
Nano Letters, vol. 20, nº 10.
pp. 7530-7535.
Dahmani, Jawad, Laporte, Catherine, Pereira, Daniel, Bélanger, Pierre et Petit, Yvan.
2020.
« Predictive model for designing soft-tissue mimicking ultrasound phantoms with adjustable elasticity ».
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 67, nº 4.
pp. 715-726.
Dammak, Houcine, Dkhil, Abdellatif, Cherifi, Ahmed et Gardoni, Mickael.
2020.
« Enterprise content management systems: a graphical approach to improve the creativity during ideation sessions- case study of an innovation competition "24h of innovation" ».
International Journal on Interactive Design and Manufacturing, vol. 14, nº 3.
pp. 939-953.
Dang, Dinh-Dong, Pham, Xuan-Tan et Nguyen, Chi-Cong.
2020.
« Thermal performance prediction in the air gap of a rotor-stator configuration: effects of numerical models ».
Journal of Thermal Science and Engineering Applications, vol. 29, nº 1.
pp. 206-218.
Dang, Huu-Phuc, Van Nguyen, Minh-Sang, Do, Dinh-Thuan, Pham, Hong-Lien, Selim, Bassant et Kaddoum, Georges.
2020.
« Joint relay selection, full-duplex and device-to-device transmission in wireless powered NOMA networks ».
IEEE Access, vol. 8.
pp. 82442-82460.
Danish, Syed Muhammad, Lestas, Marios, Qureshi, Hassaan Khaliq, Zhang, Kaiwen, Asif, Waqar et Rajarajan, Muttukrishnan.
2020.
« Securing the LoRaWAN join procedure using blockchains ».
Cluster Computing, vol. 23.
pp. 2123-2138.
Daoudi, Abdeldjalil, Perraton, Daniel, Dony, Anne et Carter, Alan.
2020.
« From complex modulus E* to creep compliance D(t): Experimental and modeling study ».
Materials, vol. 13, nº 8.
Daoust, Marc-Kevin.
2020.
« The explanatory role of consistency requirements ».
Synthese, vol. 197, nº 10.
pp. 4551-4569.
Dargahi-Zarandi, Atefeh, Hemmati-Sarapardeh, Abdolhossein, Shateri, Mohammadhadi, Menad, Nait Amar et Ahmadi, Mohammad.
2020.
« Modeling minimum miscibility pressure of pure/impure CO2-crude oil systems using adaptive boosting support vector regression: Application to gas injection processes ».
Journal of Petroleum Science and Engineering, vol. 184.
Darwish, Ahmed, Di Labbio, Giuseppe, Saleh, Wael et Kadem, Lyes.
2020.
« In vitro characterization of Lagrangian fluid transport downstream of a dysfunctional bileaflet mechanical aortic valve ».
AIP Advances, vol. 10, nº 9.
Das, Shyamashis, Fourmont, Paul, Benetti, Daniele, Cloutier, Sylvain G., Nechache, Riad, Wang, Zhiming M. et Rosei, Federico.
2020.
« High performance BiFeO3 ferroelectric nanostructured photocathodes ».
Journal of Chemical Physics, vol. 153, nº 8.
Dawa, Mohamed, Kaddoum, Georges et Herceg, Marijan.
2020.
« A framework for the lower bound on the BER of DCSK systems over multi-path Nakagami-m fading channels ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 67, nº 10.
pp. 1859-1863.
De Boissiere, Alban Main et Noumeir, Rita.
2020.
« Infrared and 3D skeleton feature fusion for RGB-D action recognition ».
IEEE Access, vol. 8.
pp. 168297-168308.
de Paula Ferreira, William, Armellini, Fabiano et De Santa-Eulalia, Luis Antonio.
2020.
« Simulation in industry 4.0: A state-of-the-art review ».
Computers and Industrial Engineering, vol. 149.
de Souza Dutra, Michael David, da Conceição Júnior, Gerson, de Paula Ferreira, William et Campos Chaves, Matheus Roberto.
2020.
« A customized transition towards smart homes: A fast framework for economic analyses ».
Applied Energy, vol. 262.
de Zambotti, Massimiliano, Goldstone, Aimee, Forouzanfar, Mohamad, Javitz, Harold, Claudatos, Stephanie, Colrain, Ian M. et Baker, Fiona C..
2020.
« The falling asleep process in adolescents ».
Sleep, vol. 43, nº 6.
Decaulne, Armelle, Joliet, Fabienne, Chanteloup, Laine, Herrmann, Thora, Bhiry, Najat et Haillot, Didier.
2020.
« Vers une démarche scientifique intégrative : l'exemple de l'Observatoire Hommes-milieux du Nunavik (Canada) ».
Journal of Interdisciplinary Methodologies and Issues in Sciences, vol. 6.
Dechouniotis, Dimitrios, Athanasopoulos, Nikolaos, Leivadeas, Aris, Mitton, Nathalie, Jungers, Raphael M. et Papavassiliou, Symeon.
2020.
« Edge computing resource allocation for dynamic networks: The DRUID-NET vision and perspective ».
Sensors, vol. 20, nº 8.
Decourt, Colin et Duong, Luc.
2020.
« Semi-supervised generative adversarial networks for the segmentation of the left ventricle in pediatric MRI ».
Computers in Biology and Medicine, vol. 123.
Dehghani, Mohammad, Mardaneh, Mohammad, Malik, Om P., Guerrero, Josep M., Sotelo, Carlos, Sotelo, David, Nazari-Heris, Morteza, Al-Haddad, Kamal et Ramirez-Mendoza, Ricardo A..
2020.
« Genetic algorithm for energy commitment in a power system supplied by multiple energy carriers ».
Sustainability, vol. 12, nº 23.
Dehghani, Mohammad, Montazeri, Zeinab, Saremi, Shahrzad, Dehghani, Ali, Malik, Om Parkash, Al-Haddad, Kamal et Guerrero, Josep M..
2020.
« HOGO: Hide objects game optimization ».
International Journal of Intelligent Engineering and Systems, vol. 13, nº 4.
pp. 216-225.
Deluy, Marc-Claudel, Khay, Mohamed, Ngo, Anh Dung, Dubé, Martine et Ganesan, Rajamohan.
2020.
« Effects of environmental conditions on the axial tensioncompression fatigue behavior of carbon/epoxy plain-weave laminates containing flaws ».
Journal of Composite Materials, vol. 54, nº 27.
pp. 4215-4230.
Derikvand, Hadis, Hajimolana, Seyed Mohammad, Jabbarzadeh, Armin et Najafi, Seyed Esmaeil.
2020.
« A robust stochastic bi-objective model for blood inventory-distribution management in a blood supply chain ».
European Journal of Industrial Engineering, vol. 14, nº 3.
pp. 369-403.
Desbois, Adrien, Beguet, Florian, Leclerc, Yannick, González Hernández, Angel Eduardo, Gervais, Sylvie, Perreault, Isabelle et de Guise, Jacques A.
2020.
« Predictive modeling for personalized three-dimensional burn injury assessments ».
Journal of Burn Care & Research, vol. 41, nº 1.
pp. 121-130.
Di Fratta, Claudio, Sun, Yixum, Causse, Philippe et Trochu, François.
2020.
« A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part I—Theory ».
Journal of Composites Science, vol. 4, nº 1.
Di Fratta, Claudio, Sun, Yixun, Causse, Philippe et Trochu, François.
2020.
« A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part II—Applications ».
Journal of Composites Science, vol. 4, nº 1.
Di Labbio, Giuseppe, Ait Abderrahmane, Hamid, Fayed, Mohamed et Ng, Hoi Dick.
2020.
« Transitions between systems of satellite vortices in a rotating fluid ».
Physics of Fluids, vol. 32, nº 10.
Di Labbio, Giuseppe, Ben Assa, Eyal et Kadem, Lyes.
2020.
« Experimental investigation of the effect of heart rate on flow in the left ventricle in health and disease - aortic valve regurgitation ».
Journal of Biomechanical Engineering, vol. 142, nº 5.
Di Labbio, Giuseppe, Thiffeault, Jean-Luc et Kadem, Lyes.
2020.
« Deducing global mixing information in the heart from sparse particle trajectory data ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 65, nº 13.
Dieye, Mouhamad, Jaafar, Wael, Elbiaze, Halima et Glitho, Roch H..
2020.
« Market driven multidomain network service orchestration in 5G networks ».
IEEE Journal on Selected Areas in Communications, vol. 38, nº 7.
pp. 1417-1431.
Ding, Yang, Acosta, Ronaldo, Enguix, Vicente, Suffren, Sabrina, Ortmann, Janosch, Luck, David, Dolz, Jose et Lodygensky, Gregory A..
2020.
« Using deep convolutional neural networks for neonatal brain image segmentation ».
Frontiers in Neuroscience, vol. 14.
Diolatzis, Stavros, Gruson, Adrien, Jakob, Wenzel, Nowrouzezahrai, Derek et Drettakis, George.
2020.
« Practical product path guiding using linearly transformed cosines ».
Computer Graphics Forum, vol. 39, nº 4.
pp. 23-33.
Diotalevi, Lucien, Bailly, Nicolas, Wagnac, Éric, Mac-Thiong, Jean-Marc, Goulet, Julien et Petit, Yvan.
2020.
« Dynamics of spinal cord compression with different patterns of thoracolumbar burst fractures: Numerical simulations using finite element modelling ».
Clinical Biomechanics, vol. 72.
pp. 186-194.
Diouf, Gor Mack, Elbiaze, Halima et Jaafar, Wael.
2020.
« On Byzantine fault tolerance in multi-master Kubernetes clusters ».
Future Generation Computer Systems, vol. 109.
pp. 407-419.
Doghri, Mouna, Duchesne, Sophie, Poulin, Annie et Villeneuve, Jean-Pierre.
2020.
« Comparative study of pressure control modes impact on water distribution system performance ».
Water Resources Management, vol. 34.
pp. 231-244.
Dolz, Jose, Desrosiers, Christian, Wang, Li, Yuan, Jing, Shen, Dinggang et Ben Ayed, Ismail.
2020.
« Deep CNN ensembles and suggestive annotations for infant brain MRI segmentation ».
Computerized Medical Imaging and Graphics, vol. 79.
Dong, Fang, Wu, Mingjie, Zhang, Gaixia, Liu, Xianhu, Rawach, Diane, Tavares, Ana C. et Sun, Shuhui.
2020.
« Defect engineering of carbon-based electrocatalysts for rechargeable zinc-air batteries ».
Chemistry - An Asian Journal, vol. 15, nº 22.
pp. 3737-3751.
Donneys-Victoria, Dayana, Marriaga-Cabrales, Nilson, Machuca-Martínez, Fiderman, Benavides-Guerrero, Jaime et Cloutier, Sylvain G..
2020.
« Indigo carmine and chloride ions removal by electrocoagulation. Simultaneous production of brucite and layered double hydroxides ».
Journal of Water Process Engineering, vol. 33.
Doolittle, Jonathan, Labbé, Jean-Philippe, Lange, Carsten E. M. C., Sinn, Rainer, Spreer, Jonathan et Ziegler, Günter M..
2020.
« Combinatorial inscribability obstructions for higher dimensional polytopes ».
Mathematika, vol. 66, nº 4.
pp. 927-953.
Doutres, Olivier, Terroir, Jonathan, Jolly, Caroline, Gauvin, Chantal, Martin, Laurence et Negrini, Alessia.
2020.
« Towards a metatheory explaining hearing protection device use among workers ».
[Résumé d'une communication à une conférence]. The Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2778.
Drouin, Simon, DiGiovanni, Daniel A., Kersten-Oertel, Marta Anna et Collins, Louis.
2020.
« Interaction driven enhancement of depth perception in angiographic volumes ».
IEEE Transactions on Visualization and Computer Graphics, vol. 26, nº 6.
pp. 2247-2257.
Du, Lei, Xing, Lixin, Zhang, Gaixia, Dubois, Marc et Sun, Shuhui.
2020.
« Strategies for engineering high-performance PGM-free catalysts toward oxygen reduction and evolution reactions ».
Small Methods, vol. 4, nº 6.
Du, Lei, Xing, Lixin, Zhang, Gaixia et Sun, Shuhui.
2020.
« Metal-organic framework derived carbon materials for electrocatalytic oxygen reactions: Recent progress and future perspectives ».
Carbon, vol. 156.
pp. 77-92.
Du, Lei, Zhang, Gaixia, Liu, Xianhu, Hassanpour, Amir, Dubois, Marc, Tavares, Ana C. et Sun, Shuhui.
2020.
« Biomass-derived nonprecious metal catalysts for oxygen reduction reaction: The demand-oriented engineering of active sites and structures ».
Carbon Energy, vol. 2, nº 4.
pp. 561-581.
Dubé, Jean-Sébastien et Duhaime, Francois.
2020.
« Chemical analysis of contaminated soil for sound environmental site assessment. Part 1: The critical role of proper sampling ».
Coating International, vol. 53, nº 8.
pp. 23-27.
Dufour, Marie-Michèle, Lanovaz, Marc J. et Cardinal, Patrick.
2020.
« Artificial intelligence for the measurement of vocal stereotypy ».
Journal of the Experimental Analysis of Behavior, vol. 114, nº 3.
pp. 368-380.
Dureau, Clément, Novelli, Marc, Arzaghi, Mandana, Massion, Roxane, Bocher, Philippe, Nadot, Yves et Grosdidier, Thierry.
2020.
« On the influence of ultrasonic surface mechanical attrition treatment (SMAT) on the fatigue behavior of the 304L austenitic stainless steel ».
Metals, vol. 10, nº 1.
Eesaee, Mostafa, David, Eric et Demarquette, Nicole R..
2020.
« Dielectric relaxation dynamics of clay-containing low-density polyethylene blends and nanocomposites ».
Polymer Engineering and Science, vol. 60, nº 5.
pp. 968-978.
Eissa, Shimaa, N’diaye, Jeanne, Brisebois, Patrick, Izquierdo, Ricardo, Tavares, Ana C. et Siaj, Mohamed.
2020.
« Probing the influence of graphene oxide sheets size on the performance of label-free electrochemical biosensors ».
Scientific Reports, vol. 10, nº 1.
El Aouni, W. et Dessaint, L. A..
2020.
« Real-time implementation of input-state linearization and model predictive control for robust voltage regulation of a DC-DC boost converter ».
IEEE Access, vol. 8.
pp. 192101-192108.
El Atrash, Khlifa S. et Assaf, Gabriel J..
2020.
« Performance testing of asphalt paving mixtures for hot condition using tension–compression test ».
Innovative Infrastructure Solutions, vol. 5, nº 1.
El Mensoum, Imane, Wahab, Omar Abdul, Kara, Nadjia et Edstrom, Claes.
2020.
« MuSC: A multi-stage service chains embedding approach ».
Journal of Network and Computer Applications, vol. 159.
Elelwi, M., Kuitche, M. A., Botez, R. M. et Dao, T. M..
2020.
« Comparison and analyses of a variable span-morphing of the tapered wing with a varying sweep angle ».
Aeronautical Journal, vol. 124, nº 1278.
pp. 1146-1169.
Elgamoudi, Abulasad, Benzerrouk, Hamza, Elango, G. Arul et Landry, René Jr.
2020.
« Gauss hermite H-infinity filter for UAV tracking using LEO satellites TDOA/FDOA measurement-part I ».
IEEE Access, vol. 8.
pp. 201428-201440.
El-Masri, Diana, Petrillo, Fabio, Guéhéneuc, Yann-Gaël, Hamou-Lhadj, Abdelwahab et Bouziane, Anas.
2020.
« A systematic literature review on automated log abstraction techniques ».
Information and Software Technology, vol. 122.
Elmidaoui, Sara, Cheikhi, Laila, Idri, Ali et Abran, Alain.
2020.
« Machine learning techniques for software maintainability prediction: Accuracy analysis ».
Journal of Computer Science and Technology, vol. 35, nº 5.
pp. 1147-1174.
Elmughrabi, Walid, Sassi, Oumaima Ben, Dao, Thien-My et Chabaane, Amin.
2020.
« Collaborative supply chain planning and scheduling of construction projects ».
IFAC - Papers Online, vol. 53, nº 2.
pp. 10761-10766.
Elmurngi, Elshrif et Gherbi, Abdelouahed.
2020.
« Building sentiment analysis model and compute reputation scores in e-commerce environment using machine learning techniques ».
International Journal of Organizational and Collective Intelligence, vol. 10, nº 1.
pp. 32-62.
Elshafey, Reda, Brisebois, Patrick, Abdulkarim, Haya, Izquierdo, Ricardo, Tavares, Ana C. et Siaj, Mohamed.
2020.
« Effect of graphene oxide sheet size on the response of a label-free voltammetric immunosensor for cancer marker VEGF ».
Electroanalysis, vol. 32, nº 10.
pp. 2205-2212.
Enmili, Ahmed, Monette, Frédéric, Yahiat, Chakib, Amor, Makram, Hedhli, Ali et Azzouz, Abdelkrim.
2020.
« Aluminosilicate-catalyzed electrochemical removal of ammonium cation from water -kinetics and selectivity ».
Environmental Research, vol. 185.
Entezaminia, Arezou, Gharbi, Ali et Ouhimmou, Mustapha.
2020.
« Environmental hedging point policies for collaborative unreliable manufacturing systems with variant emitting level technologies ».
Journal of Cleaner Production, vol. 250.
Erleben, K., Macklin, M., Andrews, S. et Kry, P. G..
2020.
« The Matchstick model for anisotropic friction cones ».
Computer Graphics Forum, vol. 39, nº 1.
pp. 450-461.
Escribano, Francisco J., Wagemakers, Alexandre, Kaddoum, Georges et Evangelista, Joao V. C..
2020.
« A spatial time-frequency hopping index modulated scheme in turbulence-free optical wireless communication channels ».
IEEE Transactions on Communications, vol. 68, nº 7.
pp. 4437-4450.
Eshteiwi, Khaled, Kaddoum, Georges et Alam, M. S..
2020.
« Ergodic capacity analysis of full duplex relaying in the presence of Co-channel interference in V2V communications ».
Sensors, vol. 20, nº 1.
Eshteiwi, Khaled, Kaddoum, Georges, Selim, Bassant et Gagnon, François.
2020.
« Impact of co-channel interference and vehicles as obstacles on full-duplex V2V cooperative wireless network ».
IEEE Transactions on Vehicular Technology, vol. 69, nº 7.
pp. 7503-7517.
Esmaeilpour, Mohammad, Cardinal, Patrick et Lameiras Koerich, Alessandro.
2020.
« A robust approach for securing audio classification against adversarial attacks ».
IEEE Transactions on Information Forensics and Security, vol. 15, nº 1.
pp. 2147-2159.
Esmaeilpour, Mohammad, Cardinal, Patrick et Lameiras Koerich, Alessandro.
2020.
« Unsupervised feature learning for environmental sound classification using Weighted Cycle-Consistent Generative Adversarial Network ».
Applied Soft Computing, vol. 86.
Esouilem, M., Bouzid, H. A. et Nadeau, S..
2020.
« Frequency failure causes analysis of pressure vessel and piping equipment: case study of the Alberta Petrochemical Industry ».
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, vol. 6, nº 4.
Fard, Majid T., Abarzadeh, Mostafa, Noghani, Kiavash A., He, Jiangbiao et Al-Haddad, Kamal.
2020.
« Si/SiC hybrid 5-level active NPC inverter for electric aircraft propulsion drive applications ».
Chinese Journal of Electrical Engineering, vol. 6, nº 4.
pp. 63-76.
Farhangian, Farzan et Landry, Rene Jr..
2020.
« Accuracy improvement of attitude determination systems using EKF-based error prediction filter and PI controller ».
Sensors, vol. 20, nº 14.
Farhangian, Farzan et Landry, René Jr..
2020.
« Multi-constellation software-defined receiver for doppler positioning with LEO satellites ».
Sensors, vol. 20, nº 20.
Farrokhi-Asl, Hamed, Makui, Ahmad, Jabbarzadeh, Armin et Barzinpour, Farnaz.
2020.
« Solving a multi-objective sustainable waste collection problem considering a new collection network ».
Operational Research, vol. 20, nº 4.
pp. 1977-2015.
Fayed, Eslam M., Shahriari, Davood, Saadati, Mohammad, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2020.
« Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ».
Materials, vol. 13, nº 11.
Feng, Lei, Zi, Yueqi, Li, Wenjing, Zhou, Fanqing, Yu, Peng et Kadoch, Michel.
2020.
« Dynamic resource allocation with RAN slicing and scheduling for uRLLC and eMBB hybrid services ».
IEEE Access, vol. 8.
pp. 34538-34551.
Feujofack Kemda, B. V., Barka, Noureddine, Jahazi, M. et Osmani, D..
2020.
« Optimization of resistance spot welding process applied to A36 mild steel and hot dipped galvanized steel based on hardness and nugget geometry ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 5-6.
pp. 2477-2491.
Fiore, M., Katsikouli, P., Zavou, E., Cunche, M., Fessant, F., Le Hello, D., Aivodji, U. M., Olivier, B., Quertier, T. et Stanica, R..
2020.
« Privacy in trajectory micro-data publishing: A survey ».
Transactions on Data Privacy, vol. 13, nº 2.
pp. 91-149.
Forbes, B., Vlachopoulos, N., Diederichs, M. S. et Aubertin, J..
2020.
« Augmenting the in-situ rock bolt pull test with distributed optical fiber strain sensing ».
International Journal of Rock Mechanics and Mining Sciences, vol. 126.
Forcier, Louis-Charles et Joncas, Simon.
2020.
« On the wind turbine blade loads from an aeroelastic simulation and their transfer to a three-dimensional finite element model of the blade ».
Wind Engineering, vol. 44, nº 6.
pp. 577-595.
Forgetta, V., Keller-Baruch, J., Forest, M., Durand, A., Bhatnagar, S., Kemp, J. P., Nethander, M., Evans, D., Morris, J. A., Kiel, D. P., Rivadeneira, F., Johansson, H., Harvey, N. C., Mellström, D., Karlsson, M., Cooper, C., Evans, D. M., Clarke, R., Kanis, J. A., Orwoll, E., McCloskey, E. V., Ohlsson, C., Pineau, J., Leslie, W. D., Greenwood, C. M. T. et Richards, J. B..
2020.
« Development of a polygenic risk score to improve screening for fracture risk: A genetic risk prediction study ».
PLoS Medicine, vol. 17, nº 7.
Formoso, Carlos T., Tzortzopoulos, Patricia et Forgues, Daniel.
2020.
« Lean and BIM meet social sciences: New perspectives in construction engineering and management ».
[Éditorial]. Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 47, nº 2.
v-vi.
Foroozmehr, Fayaz et Bocher, Philippe.
2020.
« Effect of low temperature intercritical heat-treatment on stable crack growth behavior in 13% Cr-4% Ni martensitic stainless steel multipass weldments ».
Engineering Fracture Mechanics, vol. 240.
Foroozmehr, Fayaz et Bocher, Philippe.
2020.
« On the ductile rupture of 13% Cr-4% Ni martensitic stainless steels ».
International Journal of Fracture, vol. 224, nº 1.
pp. 67-82.
Fortin, Maxime, Lina, Jean-Marc, Desjardins, Marie-Ève, Gagnon, Katia, Baril, Andrée-Ann, Carrier, Julie et Gosselin, Nadia.
2020.
« Waking EEG functional connectivity in middle-aged and older adults with obstructive sleep apnea ».
Sleep Medicine, vol. 75.
pp. 88-95.
Fournely, Marion, Petit, Yvan, Wagnac, Eric, Evin, Morgane et Arnoux, Pierre-Jean.
2020.
« Effect of experimental, morphological and mechanical factors on the murine spinal cord subjected to transverse contusion: A finite element study ».
PLoS ONE, vol. 15, nº 5.
Francis, Adel.
2020.
« Chronographical site-spatial-temporal modeling of construction operations ».
Frontiers in Built Environment, vol. 6, nº 67.
Frisken, Sarah, Luo, Ma, Juvekar, Parikshit, Bunevicius, Adomas, Machado, Ines, Unadkat, Prashin, Bertotti, Melina M., Toews, Matt, Wells, William M., Miga, Michael I. et Golby, Alexandra J..
2020.
« A comparison of thin-plate spline deformation and finite element modeling to compensate for brain shift during tumor resection ».
International Journal of Computer Assisted Radiology and Surgery, vol. 15, nº 1.
pp. 75-85.
Gagnon, Dany H. et Aissaoui, Rachid.
2020.
« Wearable robotic exoskeletons for overground walking in rehabilitation: Specific contexts of use and improvement opportunities ».
Current Robotics Reports, vol. 1, nº 4.
pp. 151-157.
Gagnon, Iannick, April, Alain et Abran, Alain.
2020.
« A critical analysis of the bat algorithm ».
Engineering Reports, vol. 2, nº 8.
Galdran, Adrian, Chelbi, Jihed, Kobi, Riadh, Dolz, José, Lombaert, Hervé, Ben Ayed, Ismail et Chakor, Hadi.
2020.
« Non-uniform label smoothing for diabetic retinopathy grading from retinal fundus images with deep neural networks ».
Translational Vision Science and Technology, vol. 9, nº 2.
Gamboa, Luis E., Gruson, Adrien et Nowrouzezahrai, Derek.
2020.
« An efficient transport estimator for complex layered materials ».
Computer Graphics Forum, vol. 39, nº 2.
pp. 363-371.
Garg, Sahil, Kaur, Kuljeet, Batra, Shalini, Aujla, Gagangeet Singh, Morgan, Graham, Kumar, Neeraj, Zomaya, Albert Y. et Ranjan, Rajiv.
2020.
« En-ABC: an ensemble artificial bee colony based anomaly detection scheme for cloud environment ».
Journal of Parallel and Distributed Computing, vol. 135.
pp. 219-233.
Garg, Sahil, Kaur, Kuljeet, Batra, Shalini, Kaddoum, Georges, Kumar, Neeraj et Boukerche, Azzedine.
2020.
« A multi-stage anomaly detection scheme for augmenting the security in IoT-enabled applications ».
Future Generation Computer Systems, vol. 104.
pp. 105-118.
Garg, Sahil, Kaur, Kuljeet, Kaddoum, Georges et Choo, Kim-Kwang Raymond.
2020.
« Toward secure and provable authentication for Internet of Things: Realizing Industry 4.0 ».
IEEE Internet of Things Journal, vol. 7, nº 5.
pp. 4598-4606.
Garg, Sahil, Kaur, Kuljeet, Kaddoum, Georges, Rodrigues, Joel J. P. C. et Guizani, Mohsen.
2020.
« Secure and lightweight authentication scheme for smart metering infrastructure in smart grid ».
IEEE Transactions on Industrial Informatics, vol. 16, nº 5.
pp. 3548-3557.
Garza, Viridiana G. Morales, Sumner, Jonathon, Nathan, Jorn et Masson, Christian.
2020.
« Evaluating the accuracy of RANS wind flow modeling over forested terrain. Part 2: Impact on capacity factor for moderately complex topography ».
Journal of Solar Energy Engineering, vol. 142, nº 2.
p. 12.
Gerlein, Luis Felipe, Benavides-Guerrero, Jaime Alberto et Cloutier, Sylvain G..
2020.
« Laser-assisted, large-area selective crystallization and patterning of titanium dioxide polymorphs ».
Advanced Engineering Materials, vol. 22, nº 2.
Ghaffarishahri, Seyedmorteza et Rivest, Louis.
2020.
« Feature recognition for structural aerospace sheet metal parts ».
Computer-Aided Design and Applications, vol. 17, nº 1.
pp. 16-43.
Ghaffarishahri, Seyedmorteza et Rivest, Louis.
2020.
« Feature-based model difference identification for aerospace sheet metal parts ».
Computer-Aided Design and Applications, vol. 18, nº 3.
pp. 443-467.
Ghazi, Georges, Botez, Ruxandra M. et Maniette, Nicolas.
2020.
« Cessna Citation X takeoff and departure trajectories prediction in presence of winds ».
Journal of Aerospace Information Systems, vol. 17, nº 12.
pp. 659-681.
Ghazi, Georges, Botez, Ruxandra Mihaela et Domanti, Simon.
2020.
« New methodology for aircraft performance model identification for flight management system applications ».
Journal of Aerospace Information Systems, vol. 17, nº 6.
pp. 294-310.
Ghazi, Georges, Gerardin, Benoit, Gelhaye, Magali et Botez, Ruxandra Mihaela.
2020.
« New adaptive algorithm development for monitoring aircraft performance and improving flight management system predictions ».
Journal of Aerospace Information Systems, vol. 17, nº 2.
pp. 97-112.
Ghommam, Jawhar, Luque-Vega, Luis F. et Saad, Maarouf.
2020.
« Distance-based formation control for quadrotors with collision avoidance via lyapunov barrier functions ».
International Journal of Aerospace Engineering, vol. 2020.
Ghommam, Jawhar, Saad, Maarouf, Wright, Steve et Zhu, Quan Min.
2020.
« Relay manoeuvre based fixed-time synchronized tracking control for UAV transport system ».
Aerospace Science and Technology, vol. 103.
Godat, Ahmed, Chaallal, Omar et Obaidat, Yasmeen.
2020.
« Non-linear finite-element investigation of the parameters affecting externally-bonded FRP flexural-strengthened RC beams ».
Results in Engineering, vol. 8.
Godat, Ahmed, Hammad, Farah et Chaallal, Omar.
2020.
« State-of-the-art review of anchored FRP shear-strengthened RC beams: A study of influencing factors ».
Composite Structures, vol. 254.
Godin, Stéphane, Hamel-Akré, Johann, Thibault, Denis, Serventi, Alessandra-Maria et Bocher, Philippe.
2020.
« Ni and Mn enrichment effects on reformed austenite: thermodynamical and low cycle fatigue stability of 13%Cr–4%Ni and 13%Cr–6%Ni stainless steels ».
SN Applied Sciences, vol. 2, nº 3.
Gomez, Victor, Gomez, Nicolas, Rodas, Jorge, Paiva, Enrique, Saad, Maarouf et Gregor, Raul.
2020.
« Pareto optimal pid tuning for Px4-Based unmanned aerial vehicles by using a multi-objective particle swarm optimization algorithm ».
Aerospace, vol. 7, nº 6.
Goulet, Julien, Richard-Denis, Andréane, Petit, Yvan, Diotalevi, Lucien et Mac-Thiong, Jean-Marc.
2020.
« Morphological features of thoracolumbar burst fractures associated with neurological outcome in thoracolumbar traumatic spinal cord injury ».
European Spine Journal, vol. 29, nº 10.
pp. 2505-2512.
Gour, Amit, Ménard, Michaël et Nabki, Frederic.
2020.
« Low-friction, high-speed rotary 3-phase micromotor using the PolyMUMPS process ».
Journal of Microelectromechanical Systems, vol. 29, nº 4.
pp. 532-543.
Gour, Amit, Nabki, Frédéric et Ménard, Michaël.
2020.
« A rapid technique to integrate micro-components on released MEMS dies using SU-8 ».
Journal of Micromechanics and Microengineering, vol. 30, nº 11.
Graziani, Andrea, Raschia, Simone, Mignini, Chiara, Carter, Alan et Perraton, Daniel.
2020.
« Use of fine aggregate matrix to analyze the rheological behavior of cold recycled materials ».
Materials and Structures = Materiaux et Constructions, vol. 53, nº 4.
Grigorie, Teodor Lucian, Khan, Shehryar, Botez, Ruxandra Mihaela, Mamou, Mahmoud et Mébarki, Youssef.
2020.
« Design and experimental testing of a control system for a morphing wing model actuated with miniature BLDC motors ».
Chinese Journal of Aeronautics, vol. 33, nº 4.
pp. 1272-1287.
Gruebele, Alexander, Roberge, Jean-Philippe, Zerbe, Andrew, Ruotolo, Wilson, Huh, Tae Myung et Cutkosky, Mark R..
2020.
« A stretchable capacitive sensory skin for exploring cluttered environments ».
IEEE Robotics and Automation Letters, vol. 5, nº 2.
pp. 1750-1757.
Gruson, Adrien, West, Rex et Hachisuka, Toshiya.
2020.
« Stratified Markov chain Monte Carlo light transport ».
Computer Graphics Forum, vol. 39, nº 2.
pp. 351-362.
Guha, A. H. et Assaf, G. J..
2020.
« Effect of Portland cement as a filler in hot-mix asphalt in hot regions ».
Journal of Building Engineering, vol. 28.
Guha, Aioub H. et Assaf, Gabriel J..
2020.
« Effects of different fillers on pavement deformation of hot mix asphalt in hot climates ».
Construction and Building Materials, vol. 261.
Guittard, Alexandre, Baraër, Michel, McKenzie, Jeffrey M., Mark, Bryan G., Rapre, Alejo C., Bury, Jeffrey, Carey, Mark et Young, Kenneth R..
2020.
« Trace metal stream contamination in a post peak water context: Lessons from the Cordillera Blanca, Peru ».
ACS Earth and Space Chemistry, vol. 4, nº 4.
pp. 506-514.
Gupta, Anubha A., Rahmani, Mohammad H., Soer, Michiel C. M., Cloutier, Sylvain G. et Izquierdo, Ricardo.
2020.
« Aerosol jet printed, microwave microstrip ring resonators for system-in-package applications ».
IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 10, nº 11.
pp. 1913-1920.
Hadjres, Souad, Belqasmi, Fatna, El Barachi, May et Kara, Nadjia.
2020.
« A green, energy, and trust-aware multi-objective cloud coalition formation approach ».
Future Generation Computer Systems, vol. 111.
pp. 52-67.
Hafemann, Luiz G., Sabourin, Robert et Oliveira, Luiz S..
2020.
« Meta-learning for fast classifier adaptation to new users of signature verification systems ».
IEEE Transactions on Information Forensics and Security, vol. 15.
pp. 1735-1745.
Hafyana, Said Mussa, Elsheikh, Awad F. et Hausler, Robert.
2020.
« Batch biosorption removal of total organic carbon from laundry aqueous media using raw pine and acid/microwave irradiation treated pine cone powder ».
Desalination and Water Treatment, vol. 183.
pp. 205-221.
Hagemeister, Nicola, Choiniere, Manon, Bureau, Nathalie J., Eriau, Nolwenn et Cagnin, Alix.
2020.
« Associations between flexion deformity and sagittal gait impairments in knee osteoarthritis patients ».
[Résumé d'une communication à une conférence]. Medicine and Science in Sports and Exercise, vol. 52, nº 17.
pp. 349-350.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2020.
« Maintenance on leasing sales strategies for manufacturing/remanufacturing system with increasing failure rate and carbon emission ».
International Journal of Production Research, vol. 58, nº 21.
pp. 6616-6637.
Hamed, Asma Ben, Leivadeas, Aris, Falkner, Matthias et Pitaev, Nikolai.
2020.
« VNF chaining performance characterization under multi-feature and oversubscription using SR-IOV ».
Informatics, vol. 7, nº 3.
Han, Qi, Ménard, Michaël et Shi, Wei.
2020.
« Superlattice arrayed waveguide grating in silicon nitride ».
IEEE Photonics Technology Letters, vol. 32, nº 22.
pp. 1411-1414.
Handler, Johannes, Harker, Matthew et Rath, Gerhard.
2020.
« Multidimensional path tracking with global least squares solution ».
[Article de conférence]. IFAC-PapersOnLine, vol. 53, nº 2.
pp. 6189-6194.
Hao, Daxian, Wang, Wei, Liu, Zhaoheng et Yun, Chao.
2020.
« Experimental study of stability prediction for high-speed robotic milling of aluminum ».
Journal of Vibration and Control, vol. 26, nº 7/8.
pp. 387-398.
Hashemi, Seyed Mohammad, Botez, Ruxandra Mihaela et Grigorie, Teodor Lucian.
2020.
« New reliability studies of data-driven aircraft trajectory prediction ».
Aerospace, vol. 7, nº 10.
Hasib, Omar Al-Terkawi, Savaria, Yvon et Thibeault, Claude.
2020.
« Optimization of small-delay defects test quality by clock speed selection and proper masking based on the weighted slack percentage ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 28, nº 3.
pp. 764-776.
Hassanpour, Amir, Nahar, Sharifun, Tong, Xin, Zhang, Gaixia, Gauthier, Marc A. et Sun, Shuhui.
2020.
« Photocatalytic interlayer spacing adjustment of a graphene oxide/zinc oxide hybrid membrane for efficient water filtration ».
Desalination, vol. 475.
Hassija, Vikas, Chamola, Vinay, Garg, Sahil, Krishna, Dara Nanda Gopala, Kaddoum, Georges et Jayakody, Dushantha Nalin K..
2020.
« A blockchain-based framework for lightweight data sharing and energy trading in V2G network ».
IEEE Transactions on Vehicular Technology, vol. 69, nº 6.
pp. 5799-5812.
Ha-Vu, Tran, Kaddoum, Georges, Elgala, Hany, Abou-Rjeily, Chadi et Kaushal, Hemani.
2020.
« Lightwave power transfer for federated learning-based wireless networks ».
IEEE Communications Letters, vol. 24, nº 7.
pp. 1472-1476.
Hawila, Abed Al Waheed, Merabtine, Abdelatif et Troussier, Nadège.
2020.
« Metamodeling of mean radiant temperature to optimize glass facade design in PMV-based comfort controlled space ».
Building Simulation, vol. 13, nº 2.
pp. 271-286.
Head, Marieke, Levasseur, Annie, Beauregard, Robert et Margni, Manuele.
2020.
« Dynamic greenhouse gas life cycle inventory and impact profiles of wood used in Canadian buildings ».
Building and Environment, vol. 173.
Heidarpour, Behdad, Dziong, Zbigniew, Lau, Wing Cheong, Nguyen, Kim Khoa et Cheriet, Mohamed.
2020.
« Application-oriented free data in cellular networks ».
IEEE Access, vol. 8.
pp. 71173-71188.
Heller, C., Steinmann, S., Levitt, J. J., Makris, N., Antshel, K. M., Fremont, W., Coman, I. L., Schweinberger, S. R., Weiß, T., Bouix, S., Kubicki, M. R., Kates, W. R. et Kikinis, Z..
2020.
« Abnormalities in white matter tracts in the fronto-striatal-thalamic circuit are associated with verbal performance in 22q11.2DS ».
Schizophrenia Research, vol. 224.
pp. 141-150.
Herglotz, Christian, Coulombe, Stéphane, Vàzquez, Carlos, Vakili, Ahmad, Kaup, André et Grenier, Jean-Claude.
2020.
« Power modeling for video streaming applications on mobile devices ».
IEEE Access, vol. 8.
pp. 70234-70244.
Hong, Tao, Zhao, Weiting, Liu, Rongke et Kadoch, Michel.
2020.
« Space-Air-Ground IoT network and related key technologies ».
IEEE Wireless Communications, vol. 27, nº 2.
pp. 96-104.
Hu, Xinyi, Kesidis, George, Heidarpour, Behdad et Dziong, Zbignew.
2020.
« Media delivery competition with edge cloud, remote cloud and networking ».
NETNOMICS: Economic Research and Electronic Networking, vol. 21, nº 1-3.
pp. 17-36.
Huang, Qian, Xie, Xianzhong et Cheriet, Mohamed.
2020.
« Reinforcement learning-based hybrid spectrum resource allocation scheme for the high load of URLLC services ».
Eurasip Journal on Wireless Communications and Networking, vol. 2020, nº 1.
Huang, W., Causse, P., Hu, H., Belouettar, S. et Trochu, F..
2020.
« Transverse compaction of 2D glass woven fabrics based on material twins – Part I: Geometric analysis ».
Composite Structures, vol. 237.
Huang, W., Causse, P., Hu, H., Belouettar, S. et Trochu, F..
2020.
« Transverse compaction of 2D glass woven fabrics based on material twins – Part II: Tow and fabric deformations ».
Composite Structures, vol. 237.
Huang, Wei, Causse, Philippe, Hu, Heng et Trochu, François.
2020.
« Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins ».
Polymer Composites, vol. 41, nº 4.
1341–1355.
Huang, Zhe, Ahmed, Cherifi et Gardoni, Mickael.
2020.
« A model for supporting the ideas screening during front end of the innovation process based on combination of methods of EcaTRIZ, AHP, and SWOT ».
Concurrent Engineering Research and Applications, vol. 28, nº 2.
pp. 89-96.
Huiyang, Xu, Sgard, Franck, Carillo, Kévin, Wagnac, Éric et de Guise, Jacques.
2020.
« A three-dimensional finite-element model of a human head for predicting the objective occlusion effect induced by earplugs ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2780.
Hussain, Afaq, Sher, Hadeed Ahmed, Murtaza, Ali Faisal et Al-Haddad, Kamal.
2020.
« A novel sensor-less current technique for photovoltaic system using DC transformer model based model predictive control ».
International Journal of Electrical Power and Energy Systems, vol. 122.
Hussain, Afaq, Sher, Hadeed Ahmed, Murtaza, Ali Faisal, Javedi, Alireza et Al-Haddad, Kamal.
2020.
« Transformerless three phase variable output voltage DC/AC standalone power converter using modified restrictive control set model predictive control ».
IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 8, nº 4.
pp. 3772-3783.
Ibrahim, Charles, Mougharbel, Imad, Kanaan, Hadi Y., Abou Daher, Nivine, Georges, Semaan et Saad, Maarouf.
2020.
« Two stages K-means and PSO-based method for optimal allocation of multiple parallel DRPs application deployment ».
IET Smart Grid, vol. 3, nº 2.
pp. 216-225.
Ibrahim, Charles, Mougharbel, Imad, Kanaan, Hadi Y., Georges, Semaan W., Daher, Nivine abou et Saad, Maarouf.
2020.
« Industrial loads used as virtual resources for a cost-effective optimized power distribution ».
IEEE Access, vol. 8.
pp. 14901-14916.
Icli, Caglar, Stepanenko, Oleksandr et Bonev, Ilian.
2020.
« New method and portable measurement device for the calibration of industrial robots ».
Sensors, vol. 20, nº 20.
Issa, Mohamad, Ibrahim, Hussein, Hosni, Hatem, Ilinca, Adrian et Rezkallah, Miloud.
2020.
« Effects of low charge and environmental conditions on diesel generators operation ».
Eng, vol. 1, nº 2.
pp. 137-152.
Jaafar, Wael, Naser, Shimaa, Muhaidat, Sami, Sofotasios, Paschalis C. et Yanikomeroglu, Halim.
2020.
« Multiple access in aerial networks: From orthogonal and non-orthogonal to rate-splitting ».
IEEE Open Journal of Vehicular Technology, vol. 1.
pp. 372-392.
Jaafar, Wael, Naser, Shimaa, Muhaidat, Sami, Sofotasios, Paschalis C. et Yanikomeroglu, Halim.
2020.
« On the downlink performance of RSMA-based UAV communications ».
IEEE Transactions on Vehicular Technology, vol. 69, nº 12.
pp. 16258-16263.
Jabbarzadeh, Armin, Azad, Nader et Verma, Manish.
2020.
« An optimization approach to planning rail hazmat shipments in the presence of random disruptions ».
Omega, vol. 96.
Jamshidi, Maryam, Rimpault, Xavier, Balazinski, Marek et Chatelain, Jean-François.
2020.
« Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 9-10.
pp. 3859-3868.
Jamshidinia, Mahdi, Ghasemi-Nanesa, Hadi, Bocher, Philippe, Nuno, Natalia, Poorganji, Behrang et Habibnejad-Korayem, Mahdi.
2020.
« Microstructural alteration of alloyed steel in direct metal laser melting by powder bed deposition system ».
Steel Research International, vol. 91, nº 10.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization ».
The International Journal of Advanced Manufacturing Technology, vol. 110, nº 9.
pp. 2669-2683.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 9-10.
4547–4565.
Jia, Jin-Gong, Zhou, Yuan-Feng, Hao, Xing-Wei, Li, Feng, Desrosiers, Christian et Zhang, Cai-Ming.
2020.
« Two-stream temporal convolutional networks for skeleton-based human action recognition ».
计算机科学技术学报 = Journal of Computer Science and Technology, vol. 35, nº 3.
pp. 538-550.
Ka, Ibrahima, Gerlein, Luis F., Asuo, Ivy M., Bouzidi, Soraya, Gedamu, Dawit M., Pignolet, Alain, Rosei, Federico, Nechache, Riad et Cloutier, Sylvain G..
2020.
« Solution-processed p-Type copper thiocyanate (CuSCN) enhanced sensitivity of PbS-Quantum-Dots-Based photodiode ».
ACS Photonics, vol. 7, nº 7.
pp. 1628-1635.
Kaddioui, Houda, Duong, Luc, Joncas, Julie, Bellefleur, Christian, Nahle, Imad, Chémaly, Olivier, Nault, Marie-Lyne, Parent, Stefan, Grimard, Guy et Labelle, Hubert.
2020.
« Convolutional neural networks for automatic risser stage assessment ».
Radiology: Artificial Intelligence, vol. 2, nº 3.
Kali, Yassine, Ayala, Magno, Rodas, Jorge, Saad, Maarouf, Doval-Gandoy, Jesus, Gregor, Raul et Benjelloun, Khalid.
2020.
« Time delay estimation based discrete-time super-twisting current control for a six-phase induction motor ».
IEEE Transactions on Power Electronics, vol. 35, nº 11.
pp. 12570-12580.
Kamali, Kaveh, Akbari, Ali Akbar, Desrosiers, Christian, Akbarzadeh, Alireza, Otis, Martin J. D. et Ayena, Johannes C..
2020.
« Low-rank and sparse recovery of human gait data ».
Sensors, vol. 20, nº 16.
Kanthabhabha Jeya, Rahul Palaniappan, Zhao, Zijian et Bouzid, Abdel-Hakim.
2020.
« Creep-relaxation modeling of HDPE and polyvinyl chloride bolted flange joints ».
Journal of Pressure Vessel Technology, vol. 142, nº 5.
Kathirgamanathan, Anjukan, Péan, Thibault, Zhang, Kun, De Rosa, Mattia, Salom, Jaume, Kummert, Michaël et Finn, Donal P..
2020.
« Towards standardising market-independent indicators for quantifying energy flexibility in buildings ».
Energy and Buildings, vol. 220.
Kaur, Kuljeet, Garg, Sahil, Kaddoum, Georges, Ahmed, Syed Hassan et Atiquzzaman, Mohammed.
2020.
« KEIDS: Kubernetes-based Energy and Interference Driven Scheduler for industrial IoT in edge-cloud ecosystem ».
IEEE Internet of Things Journal, vol. 7, nº 5.
pp. 4228-4237.
Kaur, Kuljeet, Garg, Sahil, Kaddoum, Georges, Bou-Harb, Elias et Choo, Kim-Kwang Raymond.
2020.
« A big data-enabled consolidated framework for energy efficient software defined data centers in IoT setups ».
IEEE Transactions on Industrial Informatics, vol. 16, nº 4.
pp. 2687-2697.
Kaur, Kuljeet, Garg, Sahil, Kumar, Neeraj, Aujla, Gagangeet Singh, Choo, Kim-Kwang Raymond et Obaidat, Mohammad S..
2020.
« An adaptive grid frequency support mechanism for energy management in cloud data centers ».
IEEE Systems Journal, vol. 14, nº 1.
pp. 1195-1205.
Khairallah, Diana, Chupin, Olivier, Blanc, Juliette, Hornych, Pierre, Piau, Jean-Michel, Ramirez Cardona, Diego, Ducreau, Alain et Savin, Frederic.
2020.
« Monitoring and modeling railway structures on high-speed lines with asphalt concrete underlay: A study on the Bretagne–Pays de la loire line ».
Transportation Research Record, vol. 2674, nº 12.
pp. 600-607.
Khan, Fahad Usman, Murtaza, Ali Faisal, Sher, Hadeed Ahmed, Al-Haddad, Kamal et Mustafa, Faisal.
2020.
« Cabling constraints in PV array architecture: design, mathematical model and cost analysis ».
IEEE Access, vol. 8.
pp. 182742-182754.
Khan, S., Grigorie, T. L., Botez, R. M., Mamou, M. et Mébarki, Y..
2020.
« Novel morphing wing actuator control-based particle swarm optimisation ».
Aeronautical Journal, vol. 124, nº 1271.
pp. 55-75.
Khan, Sharfuddin Ahmed, Chaabane, Amin et Dweiri, Fikri.
2020.
« Supply chain performance measurement systems: a qualitative review and proposed conceptual framework ».
International Journal of Industrial and Systems Engineering, vol. 34, nº 1.
pp. 43-64.
Kijewski-Correa, Tracy, Taflanidis, Alexandros, Vardeman, Charles II, Sweet, James, Zhang, Jize, Snaiki, Reda, Wu, Teng, Silver, Zachariah et Kennedy, Andrew.
2020.
« Geospatial environments for hurricane risk assessment : Applications to situational awareness and resilience planning in New Jersey ».
Frontiers in Built Environment, vol. 6.
Kim, Soojung, Poirier, Erik A. et Staub-French, Sheryl.
2020.
« Information commissioning: bridging the gap between digital and physical built assets ».
Journal of Facilities Management, vol. 18, nº 3.
pp. 231-245.
Kincelova, Kristina, Boton, Conrad, Blanchet, Pierre et Dagenais, Christian.
2020.
« Fire safety in tall timber building: A BIM-based automated code-checking approach ».
Buildings, vol. 10, nº 7.
Kinzel, P., Marx, C. E., Sollmann, N., Hartl, E., Guenette, J. P., Kaufmann, D., Bouix, S., Pasternak, O., Rathi, Y., Coleman, M. J., van der Kouwe, A., Helmer, K., Kilts, J. D., Naylor, J. C., Morey, R. A., Shutter, L., Andaluz, N., Coimbra, R., Lang, A. J., George, M. S., McAllister, T. W., Zafonte, R., Stein, M. B., Shenton, M. E. et Koerte, I. K..
2020.
« Serum neurosteroid levels are associated with cortical thickness in individuals diagnosed with posttraumatic stress disorder and history of mild traumatic brain injury ».
Clinical EEG and Neuroscience, vol. 51, nº 4.
pp. 285-299.
Komba, Nathanael, Zhang, Gaixia, Pu, Zonghua, Wu, Mingjie, Rosei, Federico et Sun, Shuhui.
2020.
« MoS2-supported on free-standing TiO2-nanotubes for efficient hydrogen evolution reaction ».
International Journal of Hydrogen Energy, vol. 45, nº 7.
pp. 4468-4480.
Koushki, Pantea, Kwok, Tsz-Ho, Hof, Lucas et Wuthrich, Rolf.
2020.
« Reinforcing silicone with hemp fiber for additive manufacturing ».
Composites Science and Technology, vol. 194.
pp. 141-151.
Kudryashova, A., Sheremetyev, V., Lukashevich, K., Cheverikin, V., Inaekyan, K., Galkin, S., Prokoshkin, S. et Brailovski, V..
2020.
« Effect of a combined thermomechanical treatment on the microstructure, texture and superelastic properties of Ti-18Zr-14Nb alloy for orthopedic implants ».
Journal of Alloys and Compounds, vol. 843.
p. 11.
Kuitche, Maxime A. J., Botez, Ruxandra M., Guillemin, Arthur et Communier, David.
2020.
« Aerodynamic modelling of unmanned aerial system through nonlinear vortex lattice method, computational fluid dynamics and experimental validation-application to the uas-s45 bàlaam: Part 1 ».
INCAS Bulletin, vol. 12, nº 1.
pp. 91-103.
Kuitche, Maxime Alex Junior, Botez, Ruxandra Mihaela, Guillemin, Arthur et Communier, David.
2020.
« Aerodynamic modelling of unmanned aerial system through nonlinear vortex lattice method, computational fluid dynamics and experimental validation-application to the UAS-S45 bàlaam: Part 2 ».
INCAS Bulletin, vol. 12, nº 2.
pp. 99-115.
Kuitche, Maxime Alex Junior, Botez, Ruxandra Mihaela, Viso, Remi, Maunand, Jean Christophe et Moyao, Oscar Carranza.
2020.
« Blade element momentum new methodology and wind tunnel test performance evaluation for the UAS-S45 Balaam propeller ».
CEAS Aeronautical Journal, vol. 11, nº 4.
pp. 937-953.
Labbé, Jean-Philippe et Lange, Carsten E. M. C..
2020.
« Cambrian acyclic domains: Counting c-singletons ».
Order, vol. 37, nº 3.
pp. 571-603.
Labbé, Jean-Philippe, Rote, Günter et Ziegler, Günter M..
2020.
« Area difference bounds for dissections of a square into an odd number of triangles ».
Experimental Mathematics, vol. 29, nº 3.
pp. 253-275.
Lacerda, Guilherme, Petrillo, Fabio, Pimenta, Marcelo et Guéhéneuc, Yann-Gaël.
2020.
« Code smells and refactoring: A tertiary systematic review of challenges and observations ».
Journal of Systems and Software, vol. 167.
Lachance-Tremblay, Éric, Vaillancourt, Michel, Perraton, Daniel et Di Benedetto, Hervé.
2020.
« Linear viscoelastic (LVE) properties of asphalt mixtures with different glass aggregates and hydrated lime content ».
International Journal of Pavement Engineering, vol. 21, nº 10.
pp. 1170-1179.
Lafioune, Nawel et St-Jacques, Michèle.
2020.
« Towards the creation of a searchable 3D smart city model ».
Innovation & Management Review, vol. 17, nº 3.
pp. 285-305.
Lamothe, Sébastien, Perraton, Daniel et Di Benedetto, Hervé.
2020.
« Fatigue behaviour of dry or partially saturated hot mix asphalt (HMA) ».
Fatigue and Fracture of Engineering Materials and Structures, vol. 43.
pp. 1100-1114.
Landau, K. et Nadeau, S..
2020.
« Comparison of different parameters of heart rate frequency of tasks performed during aircraft open-basket ground deicing activities ».
Ergonomics International Journal, vol. 4, nº 6.
Langevin, Antoine, Gagnon, Ghyslain et Cheriet, Mohamed.
2020.
« Crosstalk suppression in semi-intrusive load monitoring systems using hall effect sensors ».
IEEE Transactions on Smart Grid, vol. 11, nº 6.
pp. 5019-5027.
Lapointe, Mathieu et Barbeau, Benoit.
2020.
« Understanding the roles and characterizing the intrinsic properties of synthetic vs. natural polymers to improve clarification through interparticle Bridging: A review ».
Separation and Purification Technology, vol. 231.
Lapointe, Mathieu, Farner, Jeffrey M., Hernandez, Laura M. et Tufenkji, Nathalie.
2020.
« Understanding and improving microplastic removal during water treatment: Impact of coagulation and flocculation ».
Environmental Science and Technology, vol. 54, nº 14.
pp. 8719-8727.
Laporte, Claude Y. et Miranda, Jezreel Mejia.
2020.
« Delivering software- and systems-engineering standards for small teams ».
Computer, vol. 53, nº 8.
pp. 79-83.
Latreille, V., Lina, J. M., Peter-Derex, L., Corbin-Lapointe, J., Klimes, P. et Frauscher, B..
2020.
« Sleep spindles as a potential interictal biomarker of the epileptogenic zone in drug-resistant focal epilepsy ».
[Résumé d'une communication à une conférence]. Journal of Sleep Research, vol. 29, nº S1.
pp. 164-165.
Le Floch, Arnaud, Weiss, Julien, Mohammed-Taifour, Abdelouahab et Dufresne, Louis.
2020.
« Measurements of pressure and velocity fluctuations in a family of turbulent separation bubbles ».
Journal of Fluid Mechanics, vol. 902.
Le, Phuoc Luong, Elmughrabi, Walid, Dao, Thien-My et Chaabane, Amin.
2020.
« Present focuses and future directions of decision-making in construction supply chain management: a systematic review ».
International Journal of Construction Management, vol. 20, nº 5.
pp. 490-509.
Le, Thanh Dung, Noumeir, Rita, Quach, Huu Luong, Kim, Ji Hyung, Kim, Jung Ho et Kim, Ho Min.
2020.
« Critical temperature prediction for a superconductor: A variational bayesian neural network approach ».
IEEE Transactions on Applied Superconductivity, vol. 30, nº 4.
Le, Thanh-Dat et Kaddoum, Georges.
2020.
« A distributed channel access scheme for vehicles in multi-agent V2I systems ».
IEEE Transactions on Cognitive Communications and Networking, vol. 6, nº 4.
pp. 1297-1307.
Lecoublet, Brieg, Boisclair, Dominic, Evin, Morgane, Wagnac, Eric, Petit, Yvan, Aubin, Carl-Eric et Arnoux, Pierre-Jean.
2020.
« Assessing the global range of motion of the helmeted head through rotational and translational measurements ».
International Journal of Crashworthiness, vol. 25, nº 3.
pp. 321-327.
Leduc, Eric et Assaf, Gabriel J..
2020.
« Road visualization for smart city : Solution review with road quality qualification ».
Internet of Things, vol. 12.
Léger, Étienne, Reyes, Jonatan, Drouin, Simon, Popa, Tiberiu, Hall, Jeffrey A., Collins, D. Louis et Kersten-Oertel, Marta.
2020.
« MARIN: an open-source mobile augmented reality interactive neuronavigation system ».
International Journal of Computer Assisted Radiology and Surgery, vol. 15, nº 6.
pp. 1013-1021.
Lemieux, Nicolas et Noumeir, Rita.
2020.
« A hierarchical learning approach for human action recognition ».
Sensors, vol. 20, nº 17.
Lessard-Tremblay, Mathieu, Weeks, Joshua, Morelli, Laura, Cowan, Glenn, Gagnon, Ghyslain et Zednik, Ricardo J..
2020.
« Contactless capacitive electrocardiography using hybrid flexible printed electrodes ».
Sensors, vol. 20, nº 18.
Letenneur, Morgan, Imbrogno, Pete, Molavi-Kakhki, Amin et Brailovski, Vladimir.
2020.
« Laser powder bed fusion with intentionally-seeded porosity for prototyping of powder metallurgy parts ».
Journal of Manufacturing and Materials Processing, vol. 4, nº 4.
Letenneur, Morgan, Kreitcberg, Alena et Brailovski, Vladimir.
2020.
« The average grain size and grain aspect ratio in metal laser powder bed fusion: Modeling and experiment ».
Journal of Manufacturing and Materials Processing, vol. 4, nº 1.
Lévesque, J. B., Lanteigne, J., Champliaud, H. et Paquet, D..
2020.
« Modeling solid-state phase transformations of 13Cr-4Ni steels in welding heat-affected zone ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 51, nº 3.
pp. 1208-1220.
Lewandowski, Kathryn E., Bouix, Sylvain, Ongur, Dost et Shenton, Martha E..
2020.
« Neuroprogression across the early course of psychosis ».
Journal of Psychiatry and Brain Science, vol. 5, nº 1.
Li, Guozheng, Zhang, Yu, Dong, Yu, Liang, Jie, Zhang, Jinson, Wang, Jinsong, McGuffin, Michael J. et Yuan, Xiaoru.
2020.
« BarcodeTree: Scalable comparison of multiple hierarchies ».
IEEE Transactions on Visualization and Computer Graphics, vol. 26, nº 1.
pp. 1022-1032.
Li, Meiling, Selim, Bassant, Muhaidat, Sami, Sofotasios, Paschalis C., Dianati, Mehrdad, Yoo, Paul D., Liang, Jie et Wang, Anhong.
2020.
« Effects of residual hardware impairments on secure NOMA-based cooperative systems ».
IEEE Access, vol. 8.
pp. 2524-2536.
Li, Pandeng, Zhang, Yuliang, Yu, Ting, Zhang, Qingzhe, Masse, Jean-Philippe, Yang, Yingguo, Izquierdo, Ricardo, Sun, Baoquan et Ma, Dongling.
2020.
« Unveiling photovoltaic performance enhancement mechanism of polymer solar cells via synergistic effect of binary solvent additives ».
Solar RRL, vol. 4, nº 10.
Liu, Jinhua, Desrosiers, Christian et Zhou, Yuanfeng.
2020.
« Att-MoE: Attention-based Mixture of Experts for nuclear and cytoplasmic segmentation ».
Neurocomputing, vol. 411.
pp. 139-148.
Liu, Xu, Ounifi, Hibat‑Allah, Gherbi, Abdelouahe, Li, Wubin et Cheriet, Mohamed.
2020.
« A hybrid GPU-FPGA based design methodology for enhancing machine learning applications performance ».
Journal of Ambient Intelligence and Humanized Computing, vol. 11, nº 6.
pp. 2309-2323.
López, Rubén R., Ocampo, Ixchel, Sánchez, Luz-María, Alazzam, Anas, Bergeron, Karl- F., Camacho-León, Sergio, Mounier, Catherine, Stiharu, Ion et Nerguizian, Vahé.
2020.
« Surface response based modeling of liposome characteristics in a periodic disturbance mixer ».
Micromachines, vol. 11, nº 3.
Lopez-Herrejon, Roberto E., Poddar, Oishi, Herrera, Gerardo et Sevilla, Javier.
2020.
« Customization support in computer-based technologies for autism: A systematic mapping study ».
International Journal of Human-Computer Interaction, vol. 36, nº 13.
pp. 1273-1290.
Luan, Yu, Doutres, Olivier, Nélisse, Hugues et Sgard, Franck.
2020.
« An explanation of the decrease in the earplug noise reduction when combined with an earmuff on an acoustic test fixture ».
[Résumé d'une communication à une conférence]. The Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2780.
Lucas-Picher, Philippe, Arsenault, Richard, Poulin, Annie, Ricard, Simon, Lachance-Cloutier, Simon et Turcotte, Richard.
2020.
« Application of a high-resolution distributed hydrological model on a U.S.-Canada transboundary basin: simulation of the multiyear mean Annual Hydrograph and 2011 Flood of the Richelieu river basin ».
Journal of Advances in Modeling Earth Systems, vol. 12, nº 4.
MacCallum, B., Naseri, E., Butler, H., MacNevin, W., Tasker, R. A. et Ahmadi, A..
2020.
« Development of a 3D bioprinting system using a Co-Flow of calcium chloride mist ».
Bioprinting, vol. 20.
Madhu, Kalyanasundaram, Elango, Arul, Landry, René Jr et Al-Arydah, MoTassem.
2020.
« New multi-step iterative methods for solving systems of nonlinear equations and their application on GNSS pseudorange equations ».
Sensors, vol. 20, nº 21.
Mai, Juliane, Arsenault, Richard, Tolson, Bryan A., Latraverse, Marco et Demeester, Kenjy.
2020.
« Application of parameter screening to derive optimal initial state adjustments for streamflow forecasting ».
Water Resources Research, vol. 56, nº 9.
Marani, Mohsen, Songmene, Victor, Zeinali, Mohammadjavad, Kouam, Jules et Zedan, Yasser.
2020.
« Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al20 Mg2Si2Cu metal matrix composite using additives ».
Neural Computing and Applications, vol. 32.
pp. 8115-8126.
Marani, Mohsen, Zeinali, Mohammadjavad, Kouam, Jules, Songmene, Victor et Mechefske, Chris K..
2020.
« Prediction of cutting tool wear during a turning process using artificial intelligence techniques ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 1-2.
pp. 505-515.
Martel, Jean-Luc, Brissette, Francois et Poulin, Annie.
2020.
« Impact of the spatial density of weather stations on the performance of distributed and lumped hydrological models ».
Canadian Water Resources Journal = Revue canadienne des ressources hydriques, vol. 45, nº 2.
pp. 158-171.
Martel, Jean-Luc, Mailhot, Alain et Brissette, François.
2020.
« Global and regional projected changes in 100-yr subdaily, daily, and multiday precipitation extremes estimated from three large ensembles of climate simulations ».
Journal of Climate, vol. 33, nº 3.
pp. 1089-1103.
Matar, Georges, Lina, Jean-Marc et Kaddoum, Georges.
2020.
« Artificial neural network for in-bed posture classification using bed-sheet pressure sensors ».
IEEE Journal of Biomedical and Health Informatics, vol. 24, nº 1.
pp. 101-110.
Matenine, Dmitri, Kachelriess, Marc, Després, Philippe, de Guise, Jacques A. et Schmittbuhl, Matthieu.
2020.
« Potential of iterative reconstruction for maxillofacial cone beam CT imaging: Technical note ».
Neuroradiology, vol. 62, nº 11.
pp. 1511-1514.
Matoussi, Salma, Fajjari, Ilhem, Costanzo, Salvatore, Aitsaadi, Nadjib et Langar, Rami.
2020.
« 5G RAN: Functional split orchestration optimization ».
IEEE Journal on Selected Areas in Communications, vol. 38, nº 7.
pp. 1448-1463.
Maurel, Pierre, Weiss, Laurent, Grosdidier, Thierry et Bocher, Philippe.
2020.
« How does surface integrity of nanostructured surfaces induced by severe plastic deformation influence fatigue behaviors of Al alloys with enhanced precipitation? ».
International Journal of Fatigue, vol. 140.
Maza, Byron P., Dahman, Ghassan, Kaddoum, Georges et Gagnon, Francois.
2020.
« Average vector-symbol error rate closed-form expression for ML group detection receivers in large MU-MIMO channels with transmit correlation ».
IEEE Access, vol. 8.
pp. 45653-45663.
Mazars, Thibault et Francis, Adel.
2020.
« Chronographical spatiotemporal dynamic 4D planning ».
Automation in Construction, vol. 112.
Mazyan, W. I., Ahmadi, A., Ahmed, H. et Hoorfar, M..
2020.
« Increasing the COP of a refrigeration cycle in natural gas liquefaction process using refrigerant blends of Propane-NH3, Propane-SO2 and Propane-CO2 ».
Heliyon, vol. 6, nº 8.
Mello, Alexandre R., Stemmer, Marcelo R. et Koerich, Alessandro L..
2020.
« Incremental and decremental fuzzy bounded twin support vector machine ».
Information Sciences, vol. 526.
pp. 20-38.
Menanteau, Sébastien et Lemaire, Romain.
2020.
« Analysis of the influence of the conduction sub-model formulation on the modeling of laser-induced incandescence of diesel soot aggregates ».
Entropy, vol. 22, nº 1.
Mendoza, Alejandro Murrieta, Botez, Ruxandra Mihaela, Ruiz, Hugo et Kessaci, Sonya.
2020.
« Particle swarm optimization with required time of arrival constraint for aircraft trajectory ».
International Journal of Aerospace, vol. 13, nº 2.
pp. 269-291.
Mikhail, Amanda, Di Labbio, Giuseppe, Darwish, Ahmed et Kadem, Lyes.
2020.
« How pulmonary valve regurgitation after tetralogy of fallot repair changes the flow dynamics in the right ventricle: An in vitro study ».
Medical Engineering and Physics, vol. 83.
pp. 48-55.
Miranda, Christian, Kaddoum, Georges, Bou-Harb, Elias, Garg, Sahil et Kaur, Kuljeet.
2020.
« A collaborative security framework for software-defined wireless sensor networks ».
IEEE Transactions on Information Forensics and Security, vol. 15.
pp. 2602-2615.
Miranda, Raul Arango, Hausler, Robert, Lopez, Rabindranarth Romero, Glaus, Mathias et Pasillas-Diaz, Jose Ramon.
2020.
« Testing the environmental kuznets curve hypothesis in North America's Free Trade Agreement (NAFTA) countries ».
Energies, vol. 13, nº 12.
Mirvakili, Nasibeh, Di Labbio, Giuseppe, Saleh, Wael et Kadem, Lyes.
2020.
« Flow characteristics in a model of a left ventricle in the presence of a dysfunctional mitral mechanical heart valve ».
Journal of Visualization, vol. 23, nº 1.
pp. 1-8.
Mirzamohammadi, Saeed, Jabbarzadeh, Armin et Shahrabi, Mehran Salehi.
2020.
« Planning greenhouse energy supply with a focus on renewable energy in microgrid mode ».
Energy Engineering & Management, vol. 10, nº 3.
pp. 56-69.
Mobarra, Mohammadjavad, Tremblay, Bruno, Rezkallah, Miloud et Ilinca, Adrian.
2020.
« Advanced control of a compensator motor driving a variable speed diesel generator with rotating stator ».
Energies, vol. 13, nº 9.
Mobini, Majid et Kaddoum, Georges.
2020.
« Deep chaos synchronization ».
IEEE Open Journal of the Communications Society, vol. 1.
pp. 1571-1582.
Mobtaker, Azadeh, Montecinos, Julio, Ouhimmou, Mustapha et Rönnqvist, Mikael.
2020.
« Integrated forest harvest planning and road-building model with consideration of economies of scale ».
Canadian Journal of Forest Research, vol. 50, nº 10.
pp. 989-1001.
Mohseni, Ehsan, Boukani, Hamid Habibzadeh, Franca, Demartonne Ramos et Viens, Martin.
2020.
« A study of the automated eddy current detection of cracks in steel plates ».
Journal of Nondestructive Evaluation, vol. 39, nº 1.
Mohseni, Ehsan, Franca, Demartonne Ramos, Viens, Martin, Xie, Wen Fang et Xu, Baoguang.
2020.
« Finite element modelling of a reflection differential split-D eddy current probe scanning surface notches ».
Journal of Nondestructive Evaluation, vol. 39, nº 2.
Mohseni, Ehsan, Viens, Martin et Xie, Wen-Fang.
2020.
« Adaptive neuro-fuzzy inference system trained for sizing semi-elliptical notches scanned by eddy currents ».
Journal of Nondestructive Evaluation, vol. 39, nº 1.
Mohsenian Hadad Amlashi, S., Carter, A., Vaillancourt, M. et Bilodeau, J. P..
2020.
« Physical and hydraulic properties of recycled glass as granular materials for pavement structure ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 47, nº 7.
pp. 865-874.
Mokhayeri, Fania et Granger, Eric.
2020.
« A paired sparse representation model for robust face recognition from a single sample ».
Pattern Recognition, vol. 100.
Mokhayeri, Fania et Granger, Eric.
2020.
« Video face recognition using siamese networks with block-sparsity matching ».
IEEE Transactions on Biometrics, Behavior, and Identity Science, vol. 2, nº 2.
pp. 133-144.
Monajati, Hossein, Zoghlami, Mariem, Tongne, Amevi et Jahazi, Mohammad.
2020.
« Assessing microstructure-local mechanical properties in friction stir welded 6082-T6 aluminum alloy ».
Metals, vol. 10, nº 9.
Montreuil, J., Lavoie, F., Thibeault, F., Cresson, T. et de Guise, J..
2020.
« Biplanar stereoradiographic imaging as a new reference in tridimensional evaluation of tunnel positioning in anterior cruciate ligament reconstruction ».
[Résumé d'une communication à une conférence]. Orthopaedic Proceedings, vol. 102-B, nº Suppl. 8.
p. 70.
Montreuil, Julie, Saleh, Joseph, Cresson, Thierry, De Guise, Jacques A. et Lavoie, Frédéric.
2020.
« Femoral tunnel placement analysis in ACL reconstruction through use of a novel 3-dimensional reference with biplanar stereoradiographic imaging ».
Orthopaedic Journal of Sports Medicine, vol. 8, nº 4.
p. 12.
Morency, F. et Beaugendre, H..
2020.
« Comparison of turbulent Prandtl number correction models for the Stanton evaluation over rough surfaces ».
International Journal of Computational Fluid Dynamics, vol. 34, nº 4.
pp. 278-298.
Motapon, Souleman N., Lachance, Enric, Dessaint, Louis- A. et Al-Haddad, Kamal.
2020.
« A Generic cycle life model for lithium-ion batteries based on fatigue theory and equivalent cycle counting ».
IEEE Open Journal of the Industrial Electronics Society, vol. 1.
pp. 207-217.
Moulins, Anthony, Ma, Lingyue, Dugnani, Roberto et Zednik, Ricardo J..
2020.
« Dynamic crack modeling and analytical stress field analysis in single-crystal silicon using quantitative fractography ».
Theoretical and Applied Fracture Mechanics, vol. 109.
Mousavi, Seyed Sina, Guizani, Lotfi et Ouellet-Plamondon, Claudiane M..
2020.
« Simplified analytical model for interfacial bond strength of deformed steel rebars embedded in pre-cracked concrete ».
Journal of Structural Engineering (United States), vol. 146, nº 8.
Mousavi, Seyed Sina, Ouellet-Plamondon, Claudiane M., Guizani, Lotfi, Bhojaraju, Chandrasekhar et Brial, Victor.
2020.
« On mitigating rebarconcrete interface damages due to the pre-cracking phenomena using superabsorbent polymers ».
Construction and Building Materials, vol. 253.
Mtibaa, Fatma, Nguyen, Kim-Khoa, Azam, Muhammad, Papachristou, Anastasios, Venne, Jean-Simon et Cheriet, Mohamed.
2020.
« LSTM-based indoor air temperature prediction framework for HVAC systems in smart buildings ».
Neural Computing and Applications, vol. 32, nº 23.
pp. 17569-17585.
Munoz, Mirna, Mejia, Jezreel et Laporte, Claude Y..
2020.
« Implementing ISO/IEC 29110 to reinforce four very small entities of Mexico under an agile approach ».
IET Software, vol. 14, nº 2.
pp. 75-81.
Munoz, Mirna, Pena, Adriana, Mejia, Jezreel, Gasca-Hurtado, Gloria Piedad, Gomez-Alvarez, Maria Clara et Laporte, Claude Y..
2020.
« Analysis of 13 implementations of the software engineering management and engineering basic profile guide of ISO/IEC 29110 in very small entities using different life cycles ».
Journal of Software: Evolution and Process, vol. 32, nº 11.
Murrieta-Mendoza, Alejandro, Romain, Charles et Botez, Ruxandra Mihaela.
2020.
« 3D cruise trajectory optimization inspired by a shortest path algorithm ».
Aerospace, vol. 7, nº 7.
Mushakhian, Siamak, Ouhimmou, Mustapha et Rönnqvist, Mikael.
2020.
« Salvage harvest planning for spruce budworm outbreak using multistage stochastic programming ».
Canadian Journal of Forest Research, vol. 50, nº 10.
pp. 953-965.
Naga Karthik, Enamundram M. V., Karimi, Elham, Lulich, Steven M. et Laporte, Catherine.
2020.
« Automatic tongue surface extraction from three-dimensional ultrasound vocal tract images ».
Journal of the Acoustical Society of America, vol. 147, nº 3.
pp. 1623-1633.
Nam, Hannah H., Herz, Christian, Lasso, Andras, Drouin, Simon, Posada, Adriana, Morray, Brian, O'Byrne, Michael L., Paniagua, Beatriz, Joffe, Denise, Mackensen, Burkhard, Rogers, Lindsay, Fichtinger, Gabor et Jolley, Matthew A..
2020.
« Simulation of transcatheter atrial and ventricular septal defect device closure within three-dimensional echocardiography : Derived heart models on screen and in virtual reality ».
Journal of the American Society of Echocardiography, vol. 33, nº 5.
641-644.e642.
Naqvi, Bilal, Seffah, Ahmed et Abran, Alain.
2020.
« Framework for examination of software quality characteristics in conflict: A security and usability exemplar ».
Cogent Engineering, vol. 7, nº 1.
Naser, Shimaa, Sofotasios, Paschalis C., Bariah, Lina, Jaafar, Wael, Muhaidat, Sami, Al-Qutayri, Mahmoud et Dobre, Octavia A..
2020.
« Rate-splitting multiple access: Unifying NOMA and SDMA in MISO VLC channels ».
IEEE Open Journal of Vehicular Technology, vol. 1.
pp. 393-413.
Naseri, Emad, Butler, Haley, MacNevin, Wyatt, Ahmed, Marya et Ahmadi, Ali.
2020.
« Low-temperature solvent-based 3D printing of PLGA: A parametric printability study ».
Drug Development and Industrial Pharmacy, vol. 46, nº 2.
pp. 173-178.
Naseri, Emad, Cartmell, Christopher, Saab, Matthew, Kerr, Russell G. et Ahmadi, Ali.
2020.
« Development of 3D printed drug-eluting scaffolds for preventing piercing infection ».
Pharmaceutics, vol. 12, nº 9.
Nault, Marie-Lyne, Beauséjour, Marie, Marjolaine, Roy-Beaudry, Mac-Thiong, Jean-Marc, deGuise, Jacques, Labelle, Hubert et Parent, Stefan.
2020.
« A predictive model of progression for adolescent idiopathic scoliosis based on 3D spine parameters at first visit ».
Spine, vol. 45, nº 9.
pp. 605-611.
Ndiaye, Jeanne, Poorahong, Sujittra, Hmam, Ons, Jimenez, Gaston Contreras, Izquierdo, Ricardo et Siaj, Mohamed.
2020.
« Reduced graphene oxide-based foam as an endocrine disruptor adsorbent in aqueous solutions ».
Membranes, vol. 10, nº 11.
Nezami, Mohammadreza Sanadgol, Radi, Bahaa, Taherzadeh-Sani, Mohammad, Xiong, Yule, Menard, Michael, Nabki, Frederic et Liboiron-Ladouceur, Odile.
2020.
« A high-speed moving average integrator in silicon photonics for TIA-less receivers ».
IEEE Photonics Technology Letters, vol. 32, nº 17.
pp. 1033-1036.
Nguyen, Duong Tuan, Pham, Chuan, Nguyen, Kim Khoa et Cheriet, Mohamed.
2020.
« Placement and Chaining for Run-time IoT Service Deployment in Edge-Cloud ».
IEEE Transactions on Network and Service Management, vol. 17, nº 1.
pp. 459-472.
Nguyen, Minh Huy et Fortin Blanchette, Handy.
2020.
« A review and comparison of solid, multi-strands and litz style pcb winding ».
Electronics, vol. 9, nº 8.
Nguyen, Minh Huy et Fortin Blanchette, Handy.
2020.
« Optimizing ac resistance of solid PCB winding ».
Electronics, vol. 9, nº 5.
Nguyen, Ngoc, Kaddoum, Georges, Pareschi, Fabio, Rovatti, Riccardo et Setti, Gianluca.
2020.
« A fully CMOS true random number generator based on hidden attractor hyperchaotic system ».
Nonlinear Dynamics, vol. 102.
2887–2904.
Nguyen, Ngoc, Pham-Nguyen, Loan, Nguyen, Minh B. et Kaddoum, Georges.
2020.
« A low power circuit design for chaos-key based data encryption ».
IEEE Access, vol. 8.
pp. 104432-104444.
Nguyen, Trung Hieu, Nguyen-Tri, Phuong et Garnier, François.
2020.
« 3D modeling of transformation of gaseous pollutants in the high-pressure turbine of an aircraft engine ».
Propulsion and Power Research, vol. 9, nº 1.
pp. 1-14.
Nijikovsky, Boris, Aguirre Perales, Lydia, Brika, Salah Eddine et Brailovski, Vladimir.
2020.
« Towards reliable optimization of metal powderLubricant mixing for high die filling performance: Exploring a rheology based approach ».
Powder Technology, vol. 362.
pp. 168-176.
Ning, Bohao, Laporte, Catherine, Mustafy, Tanvir et Villemure, Isabelle.
2020.
« High impact loading applied during puberty intensifies bone (re)modelling in growing rats ».
[Résumé d'une communication à une conférence]. Osteoporosis International, vol. 31, nº Suppl. 1.
S290.
Njah, Yosra, Pham, Chuan et Cheriet, Mohamed.
2020.
« Service and resource aware flow management scheme for an SDN-Based smart digital campus environment ».
IEEE Access, vol. 8.
pp. 119635-119653.
Nkambou, Roger, Tato, Ange, Brisson, Janie, Robert, Serge et Sainte-Marie, Maxime.
2020.
« Une approche hybride à la modélisation de l’apprenant dans un STI pour l’apprentissage du raisonnement logique ».
[Article de conférence]. Sticef, vol. 27, nº 2.
pp. 63-102.
Nkeck, Joel Edouard, Ropagnol, Xavier, Nechache, Riad et Blanchard, François.
2020.
« Electro-optical detection of terahertz radiation in a zinc sulphide crystal at a wavelength of 512 nm ».
Applied Physics Express, vol. 13, nº 11.
Noiray, Aude, Ries, Jan, Tiede, Mark, Rubertus, Elina, Laporte, Catherine et Ménard, Lucie.
2020.
« Recording and analyzing kinematic data in children and adults with SOLLAR: Sonographic & Optical Linguo-Labial Articulation Recording system ».
Laboratory Phonology, vol. 11, nº 1.
Omoniyi, Abisola, Trask, Catherine, Milosavljevic, Stephan et Thamsuwan, Ornwipa.
2020.
« Farmers’ perceptions of exoskeleton use on farms: Finding the right tool for the work(er) ».
International Journal of Industrial Ergonomics, vol. 80.
Oo, HtunHtun, Wang, Wei et Liu, Zhaoheng.
2020.
« Tool wear monitoring system in belt grinding based on image-processing techniques ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 7-8.
pp. 2215-2229.
Osman, Kawther, Ghommam, Jawhar et Saad, Maarouf.
2020.
« Guidance based lane-changing control in high-speed vehicle for the overtaking maneuver ».
Journal of Intelligent and Robotic Systems: Theory and Applications, vol. 98, nº 3-4.
pp. 643-665.
Ouellet-Plamondon, Claudiane, Scherb, Sebastian, Köberl, Mathias et Thienel, Karl-Christian.
2020.
« Acceleration of cement blended with calcined clays ».
Construction and Building Materials, vol. 245.
Ouhaman, Assia Ait, Benjelloun, Khalid, Kenné, Jean Pierre et Najid, Najib.
2020.
« The storage space allocation problem in a dry bulk terminal: A heuristic solution ».
IFAC - Papers Online, vol. 53, nº 2.
pp. 10822-10827.
Paixão, Thiago M., Berriel, Rodrigo F., Boeres, Maria C. S., Koerich, Alessandro L., Badue, Claudine, De Souza, Alberto F. et Oliveira-Santos, Thiago.
2020.
« Self-supervised deep reconstruction of mixed strip-shredded text documents ».
Pattern Recognition, vol. 107.
Panizzon, Mateus, Milan, Gabriel Sperandino, Dorion, Eric Charles Henri et Coallier, François.
2020.
« The main determinants of new product development ability for international markets: An empirical study on brazilian manufacturing export companies ».
Journal of Engineering and Technology Management, vol. 57.
Pardhi, Pemendra Kumar, Sharma, Shailendra Kumar et Chandra, Ambrish.
2020.
« Control of single-phase solar photovoltaic supply system ».
IEEE Transactions on Industry Applications, vol. 56, nº 6.
pp. 7132-7144.
Patenaude, Marc, Baudron, Paul, Labelle, Laurence et Masse-Dufresne, Janie.
2020.
« Evaluating bank-filtration occurrence in the province of Quebec (Canada) with a GIS approach ».
Water, vol. 12, nº 3.
Pellegrino, Giovanni, Hedrich, Tanguy, Porras-Bettancourt, Manuel, Lina, Jean-Marc, Aydin, Ümit, Hall, Jeffrey, Grova, Christophe et Kobayashi, Eliane.
2020.
« Accuracy and spatial properties of distributed magnetic source imaging techniques in the investigation of focal epilepsy patients ».
Human Brain Mapping, vol. 41, nº 11.
pp. 3019-3033.
Pellegrino, Giovanni, Xu, Min, Alkuwaiti, Abdulla, Porras-Bettancourt, Manuel, Abbas, Ghada, Lina, Jean-Marc, Grova, Christophe et Kobayashi, Eliane.
2020.
« Effects of independent component analysis on magnetoencephalography source localization in pre-surgical frontal lobe epilepsy patients ».
Frontiers in Neurology, vol. 11.
Peng, Jizong, Estrada, Guillermo, Pedersoli, Marco et Desrosiers, Christian.
2020.
« Deep co-training for semi-supervised image segmentation ».
Pattern Recognition, vol. 107.
Peng, Jizong, Kervadec, Hoel, Dolz, Jose, Ben Ayed, Ismail, Pedersoli, Marco et Desrosiers, Christian.
2020.
« Discretely-constrained deep network for weakly supervised segmentation ».
Neural Networks, vol. 130.
pp. 297-308.
Peng, Rongqun, Lou, Yingxi, Kadoch, Michel et Cheriet, Mohamed.
2020.
« A human-guided machine learning approach for 5G smart tourism IoT ».
Electronics, vol. 9, nº 6.
Pereira, Daniel, Fernandes, Julio et Belanger, Pierre.
2020.
« Ex vivo assessment of cortical bone properties using low-frequency ultrasonic guided waves ».
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 67, nº 5.
pp. 910-922.
Peykani, Pejman, Mohammadi, Emran, Jabbarzadeh, Armin, Rostamy-Malkhalifeh, Mohsen et Pishvaee, Mir Saman.
2020.
« A novel two-phase robust portfolio selection and optimization approach under uncertainty: A case study of Tehran stock exchange ».
PLoS One, vol. 15, nº 10.
Pham, Manh V., Bergeron-Brlek, Milan et Heinis, Christian.
2020.
« Synthesis of DNA-encoded disulfide- and thioether-cyclized peptides ».
ChemBioChem, vol. 21, nº 4.
pp. 543-549.
Pham, Minh-Nha, Hamelin, Philippe, Hazel, Bruce et Liu, Zhaoheng.
2020.
« A two-stage state feedback controller supported by disturbance-state observer for vibration control of a flexible-joint robot ».
Robotica, vol. 38, nº 6.
pp. 1082-1104.
Piché, Paul, Haillot, Didier, Gibout, Stéphane, Arrabie, Cédric, Lamontagne, Marc-André, Gilbert, Véronique et Bédécarrats, Jean-Pierre.
2020.
« Design, construction and analysis of a thermal energy storage system adapted to greenhouse cultivation in isolated northern communities ».
Solar Energy, vol. 204.
pp. 90-105.
Pirnia, Pouyan, Duhaime, François, Ethier, Yannic et Dubé, Jean-Sébastien.
2020.
« Hierarchical multiscale numerical modelling of internal erosion with discrete and finite elements ».
Acta Geotechnica, vol. 15, nº 10.
pp. 2877-2889.
Poissenot-Arrigoni, Bastien, Law, Chun Hong, Sgard, Franck et Doutres, Olivier.
2020.
« Earcanal anthropometry analysis for the design of realistic artificial ears ».
[Résumé d'une communication à une conférence]. The Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2779.
Politowski, Cristiano, Khomh, Foutse, Romano, Simone, Scanniello, Giuseppe, Petrillo, Fabio, Guéhéneuc, Yann-Gaël et Maiga, Abdou.
2020.
« A large scale empirical study of the impact of Spaghetti Code and Blob anti-patterns on program comprehension ».
Information and Software Technology, vol. 122.
Polotski, V., Kenne, J. P. et Gharbi, A..
2020.
« Kalman filter based production control of a failure-prone single-machine single-product manufacturing system with imprecise demand and inventory information ».
Journal of Manufacturing Systems, vol. 56.
pp. 558-572.
Polyakov, Konstantin, López, Fernando et Viens, Martin.
2020.
« Advanced signal processing techniques to improve the detection of defects in pressure vessels by acoustic emission testing ».
[Article de conférence]. The e-Journal of Nondestructive Testing, vol. 25, nº 12.
Poulin, J. R., Kreitcberg, A., Terriault, P. et Brailovski, V..
2020.
« Fatigue strength prediction of laser powder bed fusion processed Inconel 625 specimens with intentionally-seeded porosity: Feasibility study ».
International Journal of Fatigue, vol. 132.
Pourranjbar, Ali, Baniasadi, Mohammadamin, Abbasfar, Aliazam et Kaddoum, Georges.
2020.
« A novel distributed algorithm for phase synchronization in unmanned aerial vehicles ».
IEEE Communications Letters, vol. 24, nº 10.
pp. 2260-2264.
Poursoltan, L., Seyedhosseini, S. M. et Jabbarzadeh, A..
2020.
« An extension to the economic production quantity problem with deteriorating products considering random machine breakdown and stochastic repair time ».
International Journal of Engineering, Transactions B: Applications, vol. 33, nº 8.
pp. 1567-1578.
Pradhan, Prabin, Sengupta, Dipankar et Ung, Bora.
2020.
« Cylindrical vector beam generation based on arc-induced long-period gratings in few-mode fiber ».
Optical Engineering, vol. 59, nº 6.
Prakash, Anand Krishnan, Zhang, Kun, Gupta, Pranav, Blum, David, Marshall, Marc, Fierro, Gabe, Alstone, Peter, Zoellick, James, Brown, Richard et Pritoni, Marco.
2020.
« Solar+ optimizer: A model predictive control optimization platform for grid responsive building microgrids ».
Energies, vol. 13, nº 12.
Proteau, Antoine, Zemouri, Ryad, Tahan, Antoine et Thomas, Marc.
2020.
« Dimension reduction and 2D-visualization for early change of state detection in a machining process with a variational autoencoder approach ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 11-12.
pp. 3597-3611.
Prudhomme, Alberto et Nabki, Frédéric.
2020.
« Comparison between linear and branched polyethylenimine and reduced graphene oxide coatings as a capture layer for micro resonant CO2 gas concentration sensors ».
[Article scientifique]. Sensors, vol. 20, nº 7.
Pu, Zonghua, Amiinu, Ibrahim Saana, Cheng, Ruilin, Wang, Pengyan, Zhang, Chengtian, Mu, Shichun, Zhao, Weiyue, Su, Fengmei, Zhang, Gaixia, Liao, Shijun et Sun, Shuhui.
2020.
« Single-atom catalysts for electrochemical hydrogen evolution reaction: Recent advances and future perspectives ».
Nano-Micro Letters, vol. 12, nº 1.
Pu, Zonghua, Liu, Tingting, Zhao, Weiyue, Shi, Xiudong, Liu, Yanchen, Zhang, Gaixia, Hu, Weihua, Sun, Shuhui et Liao, Shijun.
2020.
« Versatile route to fabricate precious-metal phosphide electrocatalyst for acid-stable hydrogen oxidation and evolution reactions ».
ACS Applied Materials and Interfaces, vol. 12, nº 10.
pp. 11737-11744.
Punithakumar, Kumaradevan, Ben Ayed, Ismail, Soliman, Abraam S., Goela, Aashish, Islam, Ali, Li, Shuo et Noga, Michelle.
2020.
« 3D motion estimation of left ventricular dynamics using MRI and track-to-track fusion ».
IEEE Journal of Translational Engineering in Health and Medicine, vol. 8.
Quéré, Sandrine et Levasseur, Annie.
2020.
« Bottom-up versus top-down hands-on options for measuring GHG and pollutants in smart cities ».
WIT Transactions on Ecology and the Environment, vol. 249.
pp. 285-293.
Rabaani, Karima, Boulejfen, Noureddine, Kouki, Ammar B. et Ghannouchi, Fadhel M..
2020.
« Fast and low complexity frequency domain analysis of nonuniform substrate integrated waveguide-based structures ».
International Journal of RF and Microwave Computer-Aided Engineering, vol. 30, nº 4.
Radi, Bahaa, Nezami, Mohammadreza Sanadgol, Menard, Michael, Nabki, Frederic et Liboiron-Ladouceur, Odile.
2020.
« A 12.5 Gb/s 1.93 pJ/Bit optical receiver exploiting silicon photonic delay lines for clock phases generation replacement ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 67, nº 10.
pp. 1864-1868.
Rahiche, Abderrahmane, Hedjam, Rachid, Al-maadeed, Somaya et Cheriet, Mohamed.
2020.
« Historical documents dating using multispectral imaging and ordinal classification ».
Journal of Cultural Heritage, vol. 45.
pp. 71-80.
Rahiminejad, Ehsan, Saberi, Mehdi, Lotfi, Reza, Taherzadeh-Sani, Mohammad et Nabki, Frederic.
2020.
« A low-voltage high-precision time-domain winner-take-all circuit ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 67, nº 1.
pp. 4-8.
Rahman, Sawsan Abdul, Tout, Hanine, Talhi, Chamseddine et Mourad, Azzam.
2020.
« Internet of things intrusion detection: Centralized, on-device, or federated learning? ».
IEEE Network, vol. 34, nº 6.
pp. 310-317.
Ramirez Cardona, D., Benedetto, H. D., Sauzeat, C., Calon, N. et Rose, J. G..
2020.
« Designs, application and performances of asphalt/bituminous trackbeds in European, Asian, and African Countries ».
Transportation Research Record, vol. 2674, nº 11.
pp. 245-262.
Rampa, Romain et Agogué, Marine.
2020.
« Lorsque les démarches d'exploration nécessitent de l'innovation collective ».
Revue Francaise de Gestion, vol. 46, nº 291.
pp. 53-71.
Ranjha, Ali et Kaddoum, Georges.
2020.
« Quasi-optimization of distance and blocklength in URLLC aided multi-hop UAV relay links ».
IEEE Wireless Communications Letters, vol. 9, nº 3.
pp. 306-310.
Raschia, Simone, Perraton, Daniel, Graziani, Andrea et Carter, Alan.
2020.
« Influence of low production temperatures on compactability and mechanical properties of cold recycled mixtures ».
Construction and Building Materials, vol. 232.
Rathee, Geetanjali, Garg, Sahil, Kaddoum, Georges, Bong Jun, Choi et Hossain, M. Shamim.
2020.
« Trusted computation using ABM and PBM decision models for ITS ».
IEEE Access, vol. 8.
pp. 195788-195798.
Rathee, Geetanjali, Garg, Sahil, Kaddoum, Georges, Choi, Bong Jun et Hossain, M. Shamim.
2020.
« Trusted orchestration for smart decision-making in internet of vehicles ».
IEEE Access, vol. 8.
pp. 157427-157436.
Rehouma, Haythem, Noumeir, Rita, Essouri, Sandrine et Jouvet, Philippe.
2020.
« Advancements in methods and camera-based sensors for the quantification of respiration ».
Sensors, vol. 20, nº 24.
Rehouma, Haythem, Noumeir, Rita, Essouri, Sandrine et Jouvet, Philippe.
2020.
« Quantitative assessment of spontaneous breathing in children: Evaluation of a depth camera system ».
IEEE Transactions on Instrumentation and Measurement, vol. 69, nº 7.
pp. 4955-4967.
Rezkallah, Miloud, Singh, Sanjeev, Chandra, Ambrish, Singh, Bhim et Ibrahim, Hussein.
2020.
« Off-grid system configurations for coordinated control of renewable energy sources ».
Energies, vol. 13, nº 18.
Riekstin, Ana Carolina, Langevin, Antoine, Dandres, Thomas, Gagnon, Ghyslain et Cheriet, Mohamed.
2020.
« Time Series-Based GHG Emissions Prediction for Smart Homes ».
IEEE Transactions on Sustainable Computing, vol. 5, nº 1.
pp. 134-146.
Rioux-Lavoie, Damien, Litalien, Joey, Gruson, Adrien, Hachisuka, Toshiya et Nowrouzezahrai, Derek.
2020.
« Delayed rejection metropolis light transport ».
ACM Transactions on Graphics, vol. 39, nº 3.
Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Montaño-Arango, Oscar et Corona-Armenta, Jose Ramón.
2020.
« Joint optimization of production and maintenance strategies considering a dynamic sampling strategy for a deteriorating system ».
Computers and Industrial Engineering, vol. 140.
Rizk, Patrick, Al Saleh, Nawal, Younes, Rafic, Ilinca, Adrian et Khoder, Jihan.
2020.
« Hyperspectral imaging applied for the detection of wind turbine blade damage and icing ».
Remote Sensing Applications: Society and Environment, vol. 18.
Robert-Lachaine, Xavier, Parent, Gerald, Fuentes, Alexandre, Hagemeister, Nicola et Aissaoui, Rachid.
2020.
« Inertial motion capture validation of 3D knee kinematics at various gait speed on the treadmill with a double-pose calibration ».
Gait and Posture, vol. 77.
pp. 132-137.
Robichaud, Alexandre, Deslandes, Dominic, Cicek, Paul-Vahé et Nabki, Frederic.
2020.
« Electromechanical tuning of piecewise stiffness and damping for long-range and high-precision piezoelectric ultrasonic transducers ».
Journal of Microelectromechanical Systems, vol. 29, nº 5.
pp. 1189-1198.
Rodriguez-Avella, K. A., Baraer, M., Mark, B., McKenzie, J. et Somers, L..
2020.
« Comparing the performance of three methods to assess DOM dynamics within two distinct glacierized watersheds of the tropical Andes ».
Environmental Pollution, vol. 265.
Rohart, Vincent, Laberge Lebel, Louis et Dubé, Martine.
2020.
« Improved adhesion between stainless steel heating element and PPS polymer in resistance welding of thermoplastic composites ».
Composites Part B: Engineering, vol. 188.
pp. 72-83.
Rohart, Vincent, Lebel, Louis L. et Dubé, Martine.
2020.
« Influence of freeze/thaw cycling on the mechanical performance of resistance-welded carbon fibre/polyphenylene sulphide composite joints ».
Journal of Reinforced Plastics and Composites, vol. 39, nº 21-22.
Rohart, Vincent, Lebel, Louis Laberge et Dubé, Martine.
2020.
« Effects of environmental conditions on the lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ».
Composites Part B: Engineering, vol. 198.
Rohoden, Katty, Estrada, Rebeca, Otrok, Hadi et Dziong, Zbigniew.
2020.
« Evolutionary game theoretical model for stable femtocells clusters formation in HetNets ».
Computer Communications, vol. 161.
pp. 266-278.
Rong, Bo, Han, Shuai, Kadoch, Michel, Chen, Xi et Jara, Antonio.
2020.
« Integration of 5G networks and internet of things for future smart city ».
[Éditorial]. Wireless Communications and Mobile Computing, vol. 2020.
Ropagnol, X., Matoba, M., Nkeck, J. E., Blanchard, F., Isgandarov, E., Yumoto, J. et Ozaki, T..
2020.
« Efficient terahertz generation and detection in cadmium telluride using ultrafast ytterbium laser ».
Applied Physics Letters, vol. 117, nº 18.
Roth, Simon-Nicolas, Leger, Pierre et Soulaïmani, Azzeddine.
2020.
« Fully-coupled hydro-mechanical cracking using XFEM in 3D for application to complex flow in discontinuities including drainage system ».
Computer Methods in Applied Mechanics and Engineering, vol. 370.
Roth, Simon-Nicolas, Léger, Pierre et Soulaïmani, Azzeddine.
2020.
« Strongly coupled XFEM formulation for non-planar three-dimensional simulation of hydraulic fracturing with emphasis on concrete dams ».
Computer Methods in Applied Mechanics and Engineering, vol. 363.
Roy, Bruno, Paquette, Eric et Poulin, Pierre.
2020.
« Particle upsampling as a flexible post-processing approach to increase details in animations of splashing liquids ».
Computers and Graphics, vol. 88.
pp. 57-69.
Ruben, Bartali, Zhang, Gaixia, Xin, Tong, Giorgio, Speranza, Victor, Micheli, Gloria, Gottardi, Michele, Fedrizzi, Filippo, Pierini, Shuhui, Sun, Nadhira, Laidani et Tavares, A. C..
2020.
« Graphene oxide/reduced graphene oxide films as protective barriers on lead against differential aeration corrosion induced by water drops ».
Nanoscale Advances, vol. 2, nº 11.
pp. 5412-5420.
Rugama Deshaies, Anne-Sophie, Desautels, Alex, Montplaisir, Jacques, Carrier, Julie, Thompson, Cynthia, Blais, Hélène, Lina, Jean-Marc et Gosselin, Nadia.
2020.
« Electroencephalographic markers of idiopathic hypersomnia: Where we are and where we are going ».
Current Sleep Medicine Reports, vol. 6, nº 3.
pp. 101-110.
Rushmore, R. J., Wilson-Braun, P., Papadimitriou, G., Ng, I., Rathi, Y., Zhang, F., O’Donnell, L. J., Kubicki, M., Bouix, S., Yeterian, E., Lemaire, J. J., Calabrese, E., Johnson, G. A., Kikinis, R. et Makris, N..
2020.
« 3D exploration of the brainstem in 50-micron resolution MRI ».
Frontiers in Neuroanatomy, vol. 14.
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert, Beauchamp, Yves, Bocher, Philippe et Vanderesse, Nicolas.
2020.
« A study of the interlaminar fracture toughness of unidirectional flax/epoxy composites ».
Journal of Composites Science, vol. 4, nº 2.
Saadati, Yousef, Lebrun, Gilbert, Bouvet, Christophe, Chatelain, Jean-François et Beauchamp, Yves.
2020.
« Study of translaminar fracture toughness of unidirectional flax/epoxy composite ».
Composites Part C: Open Access, vol. 1.
Saadati, Yousef, Lebrun, Gilbert, Chatelain, Jean-François et Beauchamp, Yves.
2020.
« Experimental investigation of failure mechanisms and evaluation of physical/mechanical properties of unidirectional flax–epoxy composites ».
Journal of Composite Materials, vol. 54, nº 20.
pp. 2781-2801.
Saber, Hamed H, Maref, Wahid et Hajiah, Ali E.
2020.
« Effective R-value of enclosed reflective space for different building applications ».
Journal of Building Physics, vol. 43, nº 5.
pp. 398-427.
Saber, Meriem Amina Si, Ghorbani, Mehdi, Bayati, Abdolkhalegh, Nguyen, Kim-Khoa et Cheriet, Mohamed.
2020.
« Online data center traffic classification based on inter-flow correlations ».
IEEE Access, vol. 8.
pp. 60401-60416.
Sabouhi, Fatemeh, Jabalameli, Mohammad Saeed, Jabbarzadeh, Armin et Fahimnia, Behnam.
2020.
« A multi-cut L-shaped method for resilient and responsive supply chain network design ».
International Journal of Production Research, vol. 58, nº 24.
pp. 7353-7381.
Sadeghifar, Morteza, Javidikia, Mahshad, Songmene, Victor et Jahazi, Mohammad.
2020.
« Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions ».
Simulation Modelling Practice and Theory, vol. 104.
Saidani, Islem, Ouni, Ali, Chouchen, Moataz et Mkaouer, Mohamed Wiem.
2020.
« Predicting continuous integration build failures using evolutionary search ».
Information and Software Technology, vol. 128.
Saidi, Mohamed Nejib, Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2020.
« Experimental evaluation of three local exhaust ventilation systems designed to reduce ultrafine dust emission during a polishing process ».
Aerosol Science and Engineering, vol. 4, nº 1.
pp. 9-17.
Salazar, Ruben Rodrigo Lopez, Tsering, Thupten, Bustamante, Prisca Raquel, Gonzalez Font de Rubinat, Paula, Stiharu, Ion, Burnier, Julia Valdemarin et Nerguizian, Vahé.
2020.
« Unraveling uveal melanoma-derived extracellular vesicles: a physicochemical characterization ».
[Résumé d'une communication à une conférence]. Investigative Ophthalmology & Visual Science, vol. 61, nº 7.
p. 3.
Salehani, Yaser Esmaeili, Arabnejad, Ehsan, Rahiche, Abderrahmane, Bakhta, Athmane et Cheriet, Mohamed.
2020.
« MSdB-NMF: multispectral document image binarization framework via non-negative matrix factorization approach ».
IEEE Transactions on Image Processing, vol. 29, nº 1.
pp. 9099-9112.
Salehian Matikolaie, Fatemeh et Tadj, Chakib.
2020.
« On the use of long-term features in a newborn cry diagnostic system ».
Biomedical Signal Processing and Control, vol. 59.
Salhab, Nazih, Rahim, Rana et Langar, Rami.
2020.
« Optimization of virtualization cost, processing power and network load of 5G software-defined data centers ».
IEEE Transactions on Network and Service Management, vol. 17, nº 3.
pp. 1542-1553.
Samad, Abdallah, Tagawa, Gitsuzo B. S., Morency, François et Volat, Christophe.
2020.
« Predicting rotor heat transfer using the viscous blade element momentum theory and unsteady vortex lattice method ».
Aerospace, vol. 7, nº 7.
Samb, Ndongo, El-Saikaly, Georges et Chaallal, Omar.
2020.
« Effet de la rigidité, du taux du polymère renforcé de fibres (PRF) et de l’armature transversale interne sur la contribution à la résistance à l’effort tranchant d’un renfort en PRF collé en surface : état de l’art et besoins en recherche ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 47, nº 11.
pp. 1276-1296.
Same, Mohammad Hossein, Gandubert, Gabriel, Ivanov, Preslav, Landry, René Jr. et Gleeton, Gabriel.
2020.
« Effects of interference and mitigation using notch filter for the DVB-S2 standard ».
Telecom, vol. 1, nº 3.
pp. 242-265.
Sarafan, Sheida, Wanjara, Priti, Levesque, Jean-Benoit, Gholipour, Javad, Champliaud, Henri et Mathieu, Louis.
2020.
« Through-thickness residual stresses, microstructure, and mechanical properties of electron beam-welded CA6NM martensitic stainless steel after postweld heat treatment ».
Advances in Materials Science and Engineering, vol. 2020.
Sargordi, Maziar, Chtchetinina, Anna, Di Labbio, Giuseppe, Ng, Hoi Dick et Kadem, Lyes.
2020.
« Pulsatile twin parallel jets through a flexible orifice with application to edge-to-edge mitral valve repair ».
Physics of Fluids, vol. 32, nº 12.
Sattar, Zeeshan, Evangelista, Joao V. C., Kaddoum, Georges et Batani, Naïm.
2020.
« Antenna Array Gain and Capacity improvements of Ultra-Wideband Millimeter Wave Systems using a Novel Analog Architecture Design ».
IEEE Wireless Communications Letters, vol. 9, nº 3.
pp. 289-293.
Sattar, Zeeshan, Evangelista, Joao Victor De Carvalho, Kaddoum, Georges et Batani, Naïm.
2020.
« Full-duplex two-tier heterogeneous network with decoupled access: Cell association, coverage, and spectral efficiency analysis ».
IEEE Access, vol. 8.
pp. 172982-172995.
Sauvé, Philippe, Bernatchez, Pascal et Glaus, Mathias.
2020.
« The role of the decision-making process on shoreline armoring: A case study in Quebec, Canada ».
Ocean and Coastal Management, vol. 198.
Sayagh, Mohammed, Kerzazi, Noureddine, Adams, Bram et Petrillo, Fabio.
2020.
« Software configuration engineering in practice interviews, survey, and systematic literature review ».
IEEE Transactions on Software Engineering, vol. 46, nº 6.
pp. 646-673.
Sayagh, Mohammed, Kerzazi, Noureddine, Petrillo, Fabio, Bennani, Khalil et Adams, Bram.
2020.
« What should your run-time configuration framework do to help developers? ».
Empirical Software Engineering, vol. 25, nº 2.
pp. 1259-1293.
Séguin, Bernard, Pinard, Chris, Lussier, Bertrand, Williams, Deanna, Griffin, Lynn, Podell, Brendan, Mejia, Sebastian, Timercan, Anatolie, Petit, Yvan et Brailovski, Vladimir.
2020.
« Limb-sparing in dogs using patient-specific, three-dimensional-printed endoprosthesis for distal radial osteosarcoma: a pilot study ».
Veterinary and Comparative Oncology, vol. 18, nº 1.
pp. 92-104.
Selim, Bassant, Alam, Md Sahabul, Evangelista, Joao V. C., Kaddoum, Georges et Agba, Basile L..
2020.
« NOMA-based IoT networks: impulsive noise effects and mitigation ».
IEEE Communications Magazine, vol. 58, nº 11.
pp. 69-75.
Selim, Bassant, Alam, Md Sahabul, Kaddoum, Georges et Agba, Basile L..
2020.
« Effect of impulsive noise on uplink NOMA systems ».
IEEE Transactions on Vehicular Technology, vol. 69, nº 3.
pp. 3454-3458.
Serenari, Federico, Madinehei, Milad, Moghimian, Nima, Fabiani, Davide et David, Éric.
2020.
« Development of reinforced polyester/graphene nanocomposite showing tailored electrical conductivity ».
Polymers, vol. 12, nº 10.
Sergent, Amélie, Rouleau, Dominique M., Beauvais, Éricka, Ménard, Jérémie, Petit, Yvan, Leduc, Stéphane et Laflamme, G. Yves.
2020.
« Quantitative localization of the entry point of the lateral ascending branch of the anterior circumflex humeral artery: a high definition CT-scan radiological study ».
Surgical and Radiologic Anatomy, vol. 42.
pp. 233-237.
Sfeir, Elie, Mitra, Rangeet, Kaddoum, Georges et Bhatia, Vimal.
2020.
« RFF based detection for SCMA in presence of PA nonlinearity ».
IEEE Communications Letters, vol. 24, nº 11.
pp. 2604-2608.
Shafiee, Ahad, Nili-Ahmadabadi, Mahmoud, Kim, Hyoung Seop et Jahazi, Mohammad.
2020.
« Development and microstructural characterization of a new wrought high entropy superalloy ».
Metals and Materials International, vol. 26, nº 5.
pp. 591-602.
Shahzad, Aamir, Zhang, Kaiwen et Gherbi, Abdelouahed.
2020.
« Intuitive development to examine collaborative iot supply chain system underlying privacy and security levels and perspective powering through proactive blockchain ».
Sensors, vol. 20, nº 13.
pp. 1-27.
Shahzad, Aamir, Zhang, Kaiwen, Landry Jr., René, Xiong, Neal et Kim, Young-Gab.
2020.
« An efficient emerging network and secured hopping scheme employed over the unsecured public channels ».
International Journal of Distributed Sensor Networks, vol. 16, nº 4.
Sharma, Manish, Amirkhan, Fatemeh, Mishra, Satyendra K., Sengupta, Dipankar, Messaddeq, Younès, Blanchard, François et Ung, Bora.
2020.
« Transmission of orbital angular momentum and cylindrical vector beams in a large-bandwidth annular core photonic crystal fiber ».
Fibers, vol. 8, nº 4.
Shateri, Mohammadhadi, Messina, Francisco, Piantanida, Pablo et Labeau, Fabrice.
2020.
« Real-time privacy-preserving data release for smart meters ».
IEEE Transactions on Smart Grid, vol. 11, nº 6.
pp. 5174-5183.
Shateri, Mohammadhadi, Sobhanigavgani, Zeinab, Alinasab, Azin, Varamesh, Amir, Hemmati-Sarapardeh, Abdolhossein, Mosavi, Amir et Shamshirband, Shahab.
2020.
« Comparative analysis of machine learning models for nanofluids viscosity assessment ».
Nanomaterials, vol. 10, nº 9.
Shen, Ruobing, Tang, Bo, Lodi, Andrea, Tramontani, Andrea et Ben Ayed, Ismail.
2020.
« An ILP model for multi-label MRFs with connectivity constraints ».
IEEE Transactions on Image Processing, vol. 29.
pp. 6909-6917.
Shen, Yi, Fang, Wei, Ye, Feng et Kadoch, Michel.
2020.
« EV charging behavior analysis using hybrid intelligence for 5G smart grid ».
Electronics, vol. 9, nº 1.
Sheremetyev, Vadim, Petrzhik, Mikhail, Zhukova, Yulia, Kazakbiev, Alibek, Arkhipova, Anastasia, Moisenovich, Mikhail, Prokoshkin, Sergey et Brailovski, Vladimir.
2020.
« Structural, physical, chemical, and biological surface characterization of thermomechanically treated Ti-Nb-based alloys for bone implants ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 108, nº 3.
pp. 647-662.
Shnfir, Mohamed, Kouam, J. et Songmene, V..
2020.
« Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel ».
International Journal of Advanced Manufacturing Technology, vol. 110, nº 3-4.
pp. 617-627.
Silva, Ronan Assumpcao, Britto Jr, Alceu de Souza, Enembreck, Fabricio, Sabourin, Robert et de Oliveira, Luiz E. S..
2020.
« CSBF: A static ensemble fusion method based on the centrality score of complex networks ».
Computational Intelligence, vol. 36, nº 2.
pp. 522-556.
Singh, Amritpal, Singh Aujla, Gagangeet, Garg, Sahil, Kaddoum, Georges et Singh, Gurpreet.
2020.
« Deep learning-based SDN model for Internet of Things: An incremental tensor train approach ».
IEEE Internet of Things Journal, vol. 7, nº 7.
pp. 6302-6311.
Singh, Bhim, Verma, Anjeet, Chandra, Ambrish et Al-Haddad, Kamal.
2020.
« Implementation of Solar PV-Battery and diesel generator based electric vehicle charging station ».
IEEE Transactions on Industry Applications, vol. 56, nº 4.
pp. 4007-4016.
Slamani, Mohamed et Chatelain, Jean-François.
2020.
« Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of carbon fiber reinforced polymers ».
Measurement: Journal of the International Measurement Confederation, vol. 152.
Slim, Hussein et Nadeau, Sylvie.
2020.
« A mixed rough sets/fuzzy logic approach for modelling systemic performance variability with FRAM ».
Sustainability, vol. 12, nº 5.
Slim, Hussein et Nadeau, Sylvie.
2020.
« A proposition for combining rough sets, fuzzy logic and FRAM to address methodological challenges in safety management: A discussion paper ».
Safety, vol. 6, nº 4.
Small, James A., van Hoek, Corrie J. G., Schollbach, Katrin, Moosavi-Khoonsari, Elmira, van der Does, Frank J. L., Melzer, Stefan, de Jong, Tako P. R., de Bie, Tilly, Versfeld, Rob A., de Roo, Michiel et van der Laan, Sieger R..
2020.
« A method for analysis of nuisance dust from integrated steel works: chemical and mineralogical characteristics of contributing sources ».
Environmental Sciences Europe, vol. 32, nº 1.
Snaiki, Reda et Wu, Teng.
2020.
« An analytical model for rapid estimation of hurricane supergradient winds ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 201.
Snaiki, Reda et Wu, Teng.
2020.
« Hurricane hazard assessment along the United States northeastern coast : Surface wind and rain fields under changing climate ».
Frontiers in Built Environment, vol. 6.
Snaiki, Reda et Wu, Teng.
2020.
« Revisiting hurricane track model for wind risk assessment ».
Structural Safety, vol. 87.
Snaiki, Reda, Wu, Teng, Whittaker, Andrew S. et Atkinson, Joseph F..
2020.
« Hurricane wind and storm surge effects on coastal bridges under a changing climate ».
Transportation Research Record, vol. 2674, nº 6.
pp. 23-32.
Soh, Mathieu Fokwa, Barbeau, Daniel, Doré, Sylvie et Forgues, Daniel.
2020.
« Qualitative analysis of Request for Information to identify design flaws in steel construction projects ».
Organization, Technology and Management in Construction, vol. 12, nº 1.
pp. 2083-2094.
Solano, Javier, Jimenez, Diego et Ilinca, Adrian.
2020.
« A modular simulation testbed for energy management in AC/DC microgrids ».
Energies, vol. 13, nº 15.
Solatiyan, Ehsan, Bueche, Nicolas et Carter, Alan.
2020.
« A review on mechanical behavior and design considerations for reinforced-rehabilitated bituminous pavements ».
Construction and Building Materials, vol. 257.
Solatiyan, Ehsan, Bueche, Nicolas, Vaillancourt, Michel et Carter, Alain.
2020.
« Permeability and mechanical property measurements of reinforced asphalt overlay with paving fabrics using novel approaches ».
Materials and Structures/Materiaux et Constructions, vol. 53, nº 1.
Soleymani, Roghayeh, Granger, Eric et Fumera, Giorgio.
2020.
« F-measure curves: A tool to visualize classifier performance under imbalance ».
Pattern Recognition, vol. 100.
Sorto-Ventura, Kevin-Rafael, Abarzadeh, Mostafa, Al-Haddad, Kamal et Dessaint, Louis A..
2020.
« 23-level single DC source hybrid PUC (H-PUC) converter topology with reduced number of components: Real-time implementation with model predictive control ».
IEEE Open Journal of the Industrial Electronics Society, vol. 1, nº 1.
pp. 127-137.
Souza, Victor L. F., Oliveira, Adriano L. I., Cruz, Rafael M. O. et Sabourin, Robert.
2020.
« A white-box analysis on the writer-independent dichotomy transformation applied to offline handwritten signature verification ».
Expert Systems with Applications, vol. 154.
Sta, Marwa, Aguiar, Graziele, Forni, Abilio A. J., Medeiros, Simone F., Santos, Amilton M. et Demarquette, Nicole R..
2020.
« Design and characterization of PNVCL-based nanofibers and evaluation of their potential applications as scaffolds for surface drug delivery of hydrophobic drugs ».
Journal of Applied Polymer Science, vol. 137, nº 11.
St-Onge, Cedric, Kara, Nadja, Wahab, Omar Abdel, Edstrom, Claes et Lemieux, Yves.
2020.
« Detection of time series patterns and periodicity of cloud computing workloads ».
Future Generation Computer Systems-the International Journal of Escience, vol. 109.
pp. 249-261.
St-Onge, David, Kaufmann, Marcel, Panerati, Jacopo, Ramtoula, Benjamin, Cao, Yanjun, Coffey, Emily B.J. et Beltrame, Giovanni.
2020.
« Planetary exploration with robot teams: Implementing higher autonomy with swarm intelligence ».
IEEE Robotics & Automation Magazine, vol. 27, nº 2.
pp. 159-168.
St-Onge, David, Varadharajan, Vivek Shankar, Svogor, Ivan et Beltrame, Giovanni.
2020.
« From design to deployment: decentralized coordination of heterogeneous robotic teams ».
Frontiers in Robotics and AI, vol. 7.
Succar, Bilal et Poirier, Erik.
2020.
« Lifecycle information transformation and exchange for delivering and managing digital and physical assets ».
Automation in Construction, vol. 112.
Sun, Yixun, Causse, Philippe, Benmokrane, Brahim et Trochu, François.
2020.
« Permeability measurement of granular porous materials by a modified falling-head method ».
Journal of Engineering Mechanics, vol. 146, nº 9.
Sydnor, V. J., Bouix, S., Pasternak, O., Hartl, E., Levin-Gleba, L., Reid, B., Tripodis, Y., Guenette, J. P., Kaufmann, D., Makris, N., Fortier, C., Salat, D. H., Rathi, Y., Milberg, W. P., McGlinchey, R. E., Shenton, M. E. et Koerte, I. K..
2020.
« Mild traumatic brain injury impacts associations between limbic system microstructure and post-traumatic stress disorder symptomatology ».
NeuroImage: Clinical, vol. 26.
Ta Dinh, Xuan, Sheremetyev, V. A., Kudryashova, A. A., Galkin, S. P., Andreev, V. A., Prokoshkin, S. D. et Brailovski, V..
2020.
« Influence of the combined radial shear rolling and rotary forging on the deformation mode of the small-diameter rod billet made of titanium alloys ».
Russian Journal of Non-Ferrous Metals, vol. 61, nº 3.
pp. 271-279.
Tabaie, Seyedmohammad, Rézaï-Aria, Farhad et Jahazi, Mohammad.
2020.
« Microstructure evolution of selective laser melted inconel 718: Influence of high heating rates ».
Metals, vol. 10, nº 5.
Tabiai, I., Texier, D., Bocher, P., Therriault, D. et Levesque, M..
2020.
« In-situ full field out of plane displacement and strain measurements at the micro-scale in single reinforcement composites under transverse load ».
Experimental Mechanics, vol. 60, nº 3.
pp. 359-377.
Taherzadeh-Sani, Mohammad, Radi, Bahaa, Nezami, Mohammadreza Sanadgol, Ménard, Michaël, Liboiron-Ladouceur, Odile et Nabki, Frederic.
2020.
« A 17 Gbps 156 fJ/bit two-channel optical receiver with optical-input split and delay in 65 nm CMOS ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 67, nº 7.
pp. 2288-2296.
Talbot, Marie-Hélène et Monfet, Danielle.
2020.
« Estimating the impact of crops on peak loads of a Building-Integrated Agriculture space ».
Science and Technology for the Built Environment, vol. 26, nº 10.
pp. 1448-1460.
Tarek, Mostafa, Brissette, Francois P. et Arsenault, Richard.
2020.
« Evaluation of the ERA5 reanalysis as a potential reference dataset for hydrological modelling over North America ».
Hydrology and Earth System Sciences, vol. 24, nº 5.
pp. 2527-2544.
Tarek, Mostafa, Brissette, François P. et Arsenault, Richard.
2020.
« Large-scale analysis of global gridded precipitation and temperature datasets for climate change impact studies ».
Journal of Hydrometeorology, vol. 21, nº 11.
pp. 2623-2640.
Tariq, Shah Ahsanuzzaman Md, Despins, Charles L., Affes, Sofiène et Nerguizian, Chahé.
2020.
« Angular dispersion of a scattered underground wireless channel at 60 GHz ».
IEEE Access, vol. 8.
pp. 67572-67580.
Tashakor, Nima, Arabsalmanabadi, Bita, Iraji, Farzad et Al-Haddad, Kamal.
2020.
« Power sharing strategy for multi-source electrical auxiliary power unit with bidirectional interaction capability ».
IET Power Electronics, vol. 13, nº 8.
pp. 1554-1564.
Tashtarian, Farzad, Zhani, Mohamed Faten, Fatemipour, Bita et Yazdani, Delaram.
2020.
« CoDeC: a cost-effective and delay-aware SFC deployment ».
IEEE Transactions on Network and Service Management, vol. 17, nº 2.
pp. 793-806.
Tata, Chafika, Fellag, Nassima et Kadoch, Michel.
2020.
« New courteous algorithm for uplink scheduling in LTE-advanced and 5G networks ».
Journal of Computer Networks and Communications, vol. 2020.
Tato, Ange et Nkambou, Roger.
2020.
« Improving first-order optimization algorithms (student abstract) ».
[Résumé d'une communication à une conférence]. Proceedings of the AAAI Conference on Artificial Intelligence, vol. 34, nº 10.
pp. 13935-13936.
Tato, Ange, Nkambou, Roger et Dufresne, Aude.
2020.
« Using AI techniques in a serious game for socio-moral reasoning development ».
[Article de conférence]. Proceedings of the AAAI Conference on Artificial Intelligence, vol. 34, nº 9.
pp. 13477-13484.
Tavallaeinejad, Mohammad, Paidoussis, Michael P., Salinas, Manuel Flores, Legrand, Mathias, Kheiri, Mojtaba et Botez, Ruxandra M..
2020.
« Flapping of heavy inverted flags: A fluid-elastic instability ».
Journal of Fluid Mechanics, vol. 904.
Tetu, Jean-Francois, Trudeau, Louis-Charles, Van Beirendonck, Michiel, Balatsoukas-Stimming, Alexios et Giard, Pascal.
2020.
« A standalone FPGA-Based miner for Lyra2REv2 cryptocurrencies ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 67, nº 4.
pp. 1194-1206.
Thamsuwan, Ornwipa, Galvin, Kit, Tchong-French, Maria, Aulck, Lovenoor, Boyle, Linda Ng, Ching, Randal P., McQuade, Kevin J. et Johnson, Peter W..
2020.
« Comparisons of physical exposure between workers harvesting apples on mobile orchard platforms and ladders, part 1: Back and upper arm postures ».
Applied Ergonomics, vol. 89.
Thamsuwan, Ornwipa, Galvin, Kit, Tchong-French, Maria, Aulck, Lovenoor, Boyle, Linda Ng, Ching, Randal P., McQuade, Kevin J. et Johnson, Peter W..
2020.
« Comparisons of physical exposure between workers harvesting apples on mobile orchard platforms and ladders, part 2: Repetitive upper arm motions ».
Applied Ergonomics, vol. 89.
Thamsuwan, Ornwipa, Milosavljevic, Stephan, Srinivasan, Divya et Trask, Catherine.
2020.
« Potential exoskeleton uses for reducing low back muscular activity during farm tasks ».
American Journal of Industrial Medicine, vol. 63, nº 11.
pp. 1017-1028.
Thaunat, Mathieu, Ingale, Pramod S., de Guise, Jacques, Dumas, Raphaël et Blache, Yoann.
2020.
« The effect of anterolateral ligament reconstruction on knee constraint: A computer model-based simulation study ».
Knee, vol. 27, nº 4.
pp. 1228-1237.
Tong, Shiyuan, Liu, Yun, Cheriet, Mohamed, Kadoch, Michel et Shen, Bo.
2020.
« UCAA: User-centric user association and resource allocation in fog computing networks ».
IEEE Access, vol. 8.
pp. 10671-10685.
Tong, Xin, Zhan, Xinxing, Rawach, Diane, Chen, Zhangsen, Zhang, Gaixia et Sun, Shuhui.
2020.
« Low-dimensional catalysts for oxygen reduction reaction ».
Progress in Natural Science: Materials International, vol. 30, nº 6.
pp. 787-795.
Torré, Jean-Philippe, Plantier, Frédéric, Marlin, Laurent, André, Rémi et Haillot, Didier.
2020.
« A novel stirred microcalorimetric cell for DSC measurements applied to the study of ice slurries and clathrate hydrates ».
Chemical Engineering Research and Design, vol. 160.
pp. 465-475.
Toubal, Lofti, Chaabouni, Hamed, Bocher, Philippe et Jianqiang, Chen.
2020.
« Monitoring fracture of high-strength steel under tensile and constant loading using acoustic emission analysis ».
Engineering Failure Analysis, vol. 108.
Tran, Dinh Son, Songmene, Victor, Ngo, Anh Dung et Kouam, Jules.
2020.
« Effects of reinforcements and cutting parameters on machinability of polypropylene-based biocomposite reinforced with biocarbon particles and chopped miscanthus fibers ».
International Journal of Advanced Manufacturing Technology, vol. 110, nº 11-12.
pp. 3423-3444.
Tran, Dinh Son, Songmene, Victor, Ngo, Anh Dung, Kouam, Jules, Rodriguez-Uribe, Arturo, Misra, Manjusri et Mohanty, Amar Kumar.
2020.
« Experimental investigation on machinability of polypropylene reinforced with miscanthus fibers and biochar ».
Materials, vol. 13, nº 5.
Tran, Duc-Dung, Tran, Ha-Vu, Ha, Dac-Binh et Kaddoum, Georges.
2020.
« Secure transmit antenna selection protocol for MIMO NOMA networks over nakagami-m channels ».
IEEE Systems Journal, vol. 14, nº 1.
pp. 253-264.
Tran, Ha-Vu, Kaddoum, Georges et Abou-Rjeily, Chadi.
2020.
« Collaborative RF and lightwave power transfer for next-generation wireless networks ».
IEEE Communications Magazine, vol. 58, nº 2.
pp. 27-33.
Tremblay, Olivier, Rimorov, Dmitry, Gagnon, Richard et Fortin-Blanchette, Handy.
2020.
« A multi-time-step transmission line interface for power hardware-in-the-loop simulators ».
IEEE Transactions on Energy Conversion, vol. 35, nº 1.
pp. 539-548.
Trochu, Julien, Chaabane, Amin et Ouhimmou, Mustapha.
2020.
« A carbon-constrained stochastic model for eco-efficient reverse logistics network design under environmental regulations in the CRD industry ».
Journal of Cleaner Production, vol. 245.
pp. 345-360.
Trudeau, Charles, Beaupré, Patrick, Bolduc, Martin et Cloutier, Sylvain G..
2020.
« All inkjet-printed perovskite-based bolometers ».
npj Flexible Electronics, vol. 4, nº 1.
Trudeau, Luc, Coulombe, Stéphane et Desrosiers, Christian.
2020.
« Multi-level rate-constrained successive elimination algorithm tailored to suboptimal motion estimation in HEVC ».
Signal Processing : Image Communication, vol. 81.
Tuyêt Mai Ngô, Valérie, Nadeau, Sylvie et Hallé, Stéphane.
2020.
« Validation of ergonomic criteria of a cooling vest for deep and ultra-deep mining ».
International Journal of Industrial Ergonomics, vol. 78.
Ujan, Sahar, Navidi, Neda et Landry, René Jr..
2020.
« An efficient Radio Frequency Interference (RFI) recognition and characterization using end-to-end transfer learning ».
Applied Sciences, vol. 10, nº 19.
Ujan, Sahar, Navidi, Neda et Landry, René Jr..
2020.
« Hierarchical classification method for radio frequency interference recognition and characterization in Satcom ».
Applied Sciences, vol. 10, nº 13.
Vaez, Parinaz, Jabbarzadeh, Armin et Azad, Nader.
2020.
« Designing a scheduling decision support system for the skin pass line: A case study of the steel finishing line ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 234, nº 13.
pp. 1640-1655.
Vafadar, Ali Khazraiyan, Bouzid, Abdel-Hakim et Ngô, Anh Dung.
2020.
« Analytical modeling of FRP hubbed flanges ».
International Journal of Pressure Vessels and Piping, vol. 188.
Vanderesse, N., Texier, D. et Bocher, P..
2020.
« Effect of porosities on brazed martensitic steel tensile properties: 2D and 3D pre-mortem vs post-mortem characterizations ».
Materials Characterization, vol. 160.
Varadharajan, Vivek Shankar, St-Onge, David, Adams, Bram et Beltrame, Giovanni.
2020.
« SOUL: data sharing for robot swarms ».
Autonomous Robots, vol. 44.
pp. 377-394.
Varadharajan, Vivek Shankar, St-Onge, David, Adams, Bram et Beltrame, Giovanni.
2020.
« Swarm relays: Distributed self-healing ground-and-air connectivity chains ».
IEEE Robotics and Automation Letters, vol. 5, nº 4.
pp. 5347-5354.
Vedaei-Sabegh, Ali, Morin, Jean-Benoit et Jahazi, Mohammad.
2020.
« Influence of nickel on high-temperature oxidation and characteristics of oxide layers in two high-strength steels ».
Steel Research International, vol. 91, nº 4.
Veit, Geoffrey et Bélanger, Pierre.
2020.
« An ultrasonic guided wave excitation method at constant phase velocity using ultrasonic phased array probes ».
Ultrasonics, vol. 102.
Venditolli, P. A., Clément, J., Blakeney, W., Hagemeister, N., Desmeules, F., Mezghani, N. et Beaulieu, Y..
2020.
« Hip-Knee-Ankle (HKA) angle modification during gait in healthy subjects ».
[Résumé d'une communication à une conférence]. Orthopaedic Proceedings, vol. 102-B, nº Suppl. 6.
Verma, Anjeet, Singh, Bhim, Chandra, Ambrish et Al-Haddad, Kamal.
2020.
« An implementation of solar PV array based multifunctional EV charger ».
IEEE Transactions on Industry Applications, vol. 56, nº 4.
pp. 4166-4178.
Vigneault, Marc-Antoine, Boton, Conrad, Chong, Heap-Yih et Cooper-Cooke, Barry.
2020.
« An innovative framework of 5D BIM solutions for construction cost management: A systematic review ».
Archives of Computational Methods in Engineering, vol. 27.
pp. 1013-1030.
Voix, Jérémie.
2020.
« The journey to hearing protection fit-testing: From a doctoral project, to meeting a mentor, to a world recognized best practice ».
[Résumé d'une communication à une conférence]. The Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2566.
Wachinger, Christian, Toews, Matthew, Langs, Georg, Wells, William et Golland, Polina.
2020.
« Keypoint transfer for fast whole-body segmentation ».
IEEE Transactions on Medical Imaging, vol. 39, nº 2.
pp. 273-282.
Walzberg, Julien, Dandres, Thomas, Merveille, Nicolas, Cheriet, Mohamed et Samson, Rejean.
2020.
« Should we fear the rebound effect in smart homes? ».
Renewable and Sustainable Energy Reviews, vol. 125.
Wang, Jintian, Chen, Zhiqiang, Guan, Aaron, Demarquette, Nicole Raymonde et Naguib, Hani E..
2020.
« Ionic liquids facilitated dispersion of chitin nanowhiskers for reinforced epoxy composites ».
Carbohydrate Polymers, vol. 247.
Wang, Zijie, Liu, Rongke, Liu, Qirui, Thompson, John S. et Kadoch, Michel.
2020.
« Energy efficient data collection and device positioning in UAV-assisted IoT ».
IEEE Internet of Things Journal, vol. 7, nº 2.
pp. 1122-1139.
Wei, Yuan, Hong, Tao et Kadoch, Michel.
2020.
« Improved Kalman filter variants for UAV tracking with radar motion models ».
Electronics, vol. 9, nº 5.
West, Rex, Georgiev, Iliyan, Gruson, Adrien et Hachisuka, Toshiya.
2020.
« Continuous multiple importance sampling ».
ACM Transactions on Graphics, vol. 39, nº 4.
Wu, Mingjie, Zhang, Gaixia, Chen, Ning, Chen, Weifeng, Qiao, Jinlin et Sun, Shuhui.
2020.
« A self-supported electrode as a high-performance binder- and carbon-free cathode for rechargeable hybrid zinc batteries ».
Energy Storage Materials, vol. 24.
pp. 272-280.
Xiyao, Wang, Deslandes, Dominic, Wenjie, Feng, Haidong, Chen et Wenquan, Che.
2020.
« Coupling analysis of adjacent substrate-integrated waveguides based on the equivalent transmission line model ».
IEEE Transactions on Microwave Theory and Techniques, vol. 68, nº 4.
pp. 1347-1354.
Xu, Jin, Dziong, Zbigniew, Luxin, Yan, Huang, Zhe, Xu, Ping et Cabani, Adnane.
2020.
« Intelligent multi-agent based C-RAN architecture for 5G radio resource management ».
Computer Networks, vol. 180.
pp. 258-266.
Xu, Shihao, Zhang, Zhenjiang, Kadoch, Michel et Cheriet, Mohamed.
2020.
« A collaborative cloud-edge computing framework in distributed neural network ».
Eurasip Journal on Wireless Communications and Networking, vol. 2020.
Yalpanian, Ali et Guilbault, Raynald.
2020.
« A fast correction for half-space theory applied to contact modeling of bodies with curved free surfaces ».
Tribology International, vol. 147.
Yaméogo, Banti Laure M., Charlton, Douglas W., Doucet, David, Desrosiers, Christian, O' Sullivan, Maurice et Tremblay, Christine.
2020.
« Trends in optical span loss detected using the time series decomposition method ».
Journal of Lightwave Technology, vol. 38, nº 18.
pp. 5026-5035.
Yang, Helin L., Xie, Xianzhong Z. et Kadoch, Michel.
2020.
« Machine learning techniques and a case study for intelligent wireless networks ».
IEEE Network, vol. 34, nº 3.
pp. 208-215.
Yang, Hui, Zhan, Kaixuan, Kadoch, Michel, Liang, Yongshen et Cheriet, Mohamed.
2020.
« BLCS: Brain-like distributed control security in cyber physical systems ».
IEEE Network, vol. 34, nº 3.
pp. 8-15.
Yang, Xiaohua, Wang, Yucheng, Zhang, Gaixia, Du, Lei, Yang, Lijun, Markiewicz, Matthew, Choi, Ja-yeon, Chenitz, Régis et Sun, Shuhui.
2020.
« SiO2-Fe/N/C catalyst with enhanced mass transport in PEM fuel cells ».
Applied Catalysis B: Environmental, vol. 264.
Yang, Xiaohua, Zhang, Gaixia, Du, Lei, Zhang, Jun, Chiang, Fu-Kuo, Wen, Yuren, Wang, Xiaomin, Wu, Yucheng, Chen, Ning et Sun, Shuhui.
2020.
« PGM-Free Fe/N/C and ultralow loading Pt/C hybrid cathode catalysts with enhanced stability and activity in PEM fuel cells ».
ACS Applied Materials and Interfaces, vol. 12, nº 12.
pp. 13739-13749.
Yang, Zhixiang, Feng, Lei, Chang, Zhengwei, Lu, Jizhao, Liu, Rongke, Kadoch, Michel et Cheriet, Mohamed.
2020.
« Prioritized uplink resource allocation in smart grid backscatter communication networks via deep reinforcement learning ».
Electronics, vol. 9, nº 4.
Yeganefar, Ali, Niknam, Seyed Ali et Songmene, Victor.
2020.
« Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451 ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 44, nº 3.
pp. 427-439.
Yu, Fan, Du, Lei, Zhang, Gaixia, Su, Fengmei, Wang, Weichao et Sun, Shuhui.
2020.
« Electrode engineering by atomic layer deposition for sodium-ion batteries: From traditional to advanced batteries ».
Advanced Functional Materials, vol. 30, nº 9.
Yu, Peng, Zhou, Fanqin, Zhang, Xiang, Qiu, Xuesong, Kadoch, Michel et Cheriet, Mohamed.
2020.
« Deep learning-based resource allocation for 5G broadband TV service ».
IEEE Transactions on Broadcasting, vol. 66, nº 4.
pp. 800-813.
Yu, Shuai, Dab, Boutheina, Movahedi, Zeinab, Langar, Rami et Wang, Li.
2020.
« A socially-aware hybrid computation offloading framework for multi-access edge computing ».
IEEE Transactions on Mobile Computing, vol. 19, nº 6.
pp. 1247-1259.
Yüksel, D., Goldstone, A., Prouty, D., Forouzanfar, M., Claudatos, S., Lee, Q., Wang, R., Dulai, T., Arra, N., Volpe, L., Durley, I., Baker, F. et de Zambotti, M..
2020.
« 0916 The Use of Immersive Virtual Reality and Slow Breathing to Enhance Relaxation and Sleep in Adolescents ».
[Résumé d'une communication à une conférence]. Sleep, vol. 43, nº Suppl. 1.
A348.
Zemouri, Ryad, Levesque, Melanie, Amyot, Normand, Hudon, Claude, Kokoko, Olivier et Tahan, Souheil Antoine.
2020.
« Deep convolutional variational autoencoder as a 2D-visualization tool for partial discharge source classification in hydrogenerators ».
IEEE Access, vol. 8.
pp. 5438-5454.
Zhang, C., Jahazi, M. et Tremblay, R..
2020.
« Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingots ».
International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2.
pp. 167-175.
Zhang, Chunping, Jahazi, Mohammad et Gallego, Paloma Isabel.
2020.
« On the impact of microsegregation model on the thermophysical and solidification behaviors of a large size steel ingot ».
Metals, vol. 10, nº 1.
Zhang, Gaixia, Sebastián, David, Zhang, Xilin, Wei, Qiliang, Lo Vecchio, Carmelo, Zhang, Jihai, Baglio, Vincenzo, Wang, Weichao, Sun, Shuhui, Aricò, Antonino S. et Tavares, Ana C..
2020.
« Engineering of a low-cost, highly active, and durable tantalate–graphene hybrid electrocatalyst for oxygen reduction ».
Advanced Energy Materials, vol. 10, nº 24.
Zhang, Jihai, Zhang, Gaixia, Zhou, Tao et Sun, Shuhui.
2020.
« Recent developments of planar micro-supercapacitors: Fabrication, properties, and applications ».
Advanced Functional Materials, vol. 30, nº 19.
Zhang, Jun, Zhang, Gaixia, Chen, Zhangsen, Dai, Hongliu, Hu, Qingmin, Liao, Shijun et Sun, Shuhui.
2020.
« Emerging applications of atomic layer deposition for lithium-sulfur and sodium-sulfur batteries ».
Energy Storage Materials, vol. 26.
pp. 513-533.
Zhang, Kun, Blum, David H., Grahovac, Milica, Hu, Jianjun, Granderson, Jessica et Wetter, Michael.
2020.
« Development and verification of control sequences for single-zone variable air volume system based on ASHRAE Guideline ».
[Article de conférence]. Linköping Electronic Conference Proceedings, vol. 169, nº 9.
pp. 81-90.
Zhang, Meng, Zheng, Jianhong, Huang, Qian et Kadoch, Michel.
2020.
« Green communication for MIMO SWIPT-powered 5G Internet of Things with full-duplex relay base on secure transmission and energy collection constraints ».
Eurasip Journal on Wireless Communications and Networking, vol. 2020, nº 1.
Zhang, Mingli, Desrosiers, Christian, Guo, Yuhong, Khundrakpam, Budhachandra, Al-Sharif, Noor, Kiar, Greg, Valdes-Sosa, Pedro, Poline, Jean-Baptiste et Evans, Alan.
2020.
« Brain status modeling with non-negative projective dictionary learning ».
NeuroImage, vol. 206.
Zhang, Wei, Uh Zapata, Miguel, Bai, Xin, Pham Van Bang, Damien et Nguyen, Kim Dan.
2020.
« An unstructured finite volume method based on the projection method combined momentum interpolation with a central scheme for three-dimensional nonhydrostatic turbulent flows ».
European Journal of Mechanics, B/Fluids, vol. 84.
pp. 164-185.
Zhang, Wei, Uh Zapata, Miguel, Bai, Xin, Pham-Van-Bang, Damien et Nguyen, Kim Dan.
2020.
« Three-dimensional simulation of horseshoe vortex and local scour around a vertical cylinder using an unstructured finite-volume technique ».
International Journal of Sediment Research, vol. 35, nº 3.
pp. 295-306.
Zhang, Yangan, Chen, Guichen, Du, Hang, Yuan, Xueguang, Kadoch, Michel et Cheriet, Mohamed.
2020.
« Real-time remote health monitoring system driven by 5G MEC-IoT ».
Electronics, vol. 9, nº 11.
Zhani, Mohamed Faten et ElBakoury, Hesham.
2020.
« FlexNGIA: A flexible internet architecture for the next-generation tactile internet ».
Journal of Network and Systems Management, vol. 28, nº 4.
pp. 751-795.
Zhao, Cha, Brissette, Francois, Chen, Jie et Martel, Jean-Luc.
2020.
« Frequency change of future extreme summer meteorological and hydrological droughts over North America ».
Journal of Hydrology, vol. 584.
Zhou, Fanqin, Yu, Peng, Feng, Lei, Qiu, Xuesong, Wang, Zhili, Meng, Luoming, Kadoch, Michel, Gong, Liang et Yao, Xianjiong.
2020.
« Automatic network slicing for IoT in smart city ».
IEEE Wireless Communications, vol. 27, nº 6.
pp. 108-115.
Zhuldybina, Mariia, Ropagnol, Xavier, Bois, Chloé, Zednik, Ricardo J. et Blanchard, François.
2020.
« Printing accuracy tracking with 2D optical microscopy and super-resolution metamaterial-assisted 1D terahertz spectroscopy ».
npj Flexible Electronics, vol. 4, nº 1.
Ziane, Khaled, Ilinca, Adrian, Khan, Abdullah et Zebirate, Soraya.
2020.
« A cuckoo search based neural network to predict fatigue life in rotor blade composites ».
Journal of Mechanical Engineering and Sciences, vol. 14, nº 1.
pp. 6430-6442.
Zinsalo, Joël M., Lamarche, Louis et Raymond, Jasmin.
2020.
« Injection strategies in an enhanced geothermal system based on discrete fractures model ».
Applied Thermal Engineering, vol. 169.
Zongo, Floriane, Simoneau, Charles, Timercan, Anatolie, Tahan, Antoine et Brailovski, Vladimir.
2020.
« Geometric deviations of laser powder bedfused AlSi10Mg components: numerical predictions versus experimental measurements ».
International Journal of Advanced Manufacturing Technology, vol. 107.
pp. 1411-1436.
Zorgani, M., Garcia-Mateo, Carlos et Jahazi, M..
2020.
« The role of ausforming in the stability of retained austenite in a medium-C carbide-free bainitic steel ».
Journal of Materials Research and Technology, vol. 9, nº 4.
pp. 7762-7776. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau