FRANÇAIS |
Documents publish in 2005Jump to: Abran, Alain | Aissaoui, Rachid | Akhrif, Ouassima | Al Haddad, Kamal | April, Alain | Arteau, Jean | Artiba, Abdelhakim | Assi, Rola | Bauer, Dominique Bernard | Belzile, Jean | Ben Ayed, Ismail | Bennani, Maria | Bennis, Saad | Bigras, Pascal | Blaquière, Yves | Bocher, Philippe | Boland, Jean-François | Bonev, Ilian | Botez, Ruxandra | Bouix, Sylvain | Boulé, Marc | Bourque, Pierre | Bouzid, Hakim | Brailovski, Vladimir | Brissette, François | Bédard, Claude | Cardinal, Patrick | Carter, Alan | Chaallal, Omar | Champagne, Roger | Champliaud, Henri | Chandra, Ambrish | Chatelain, Jean-François | Cheriet, Mohamed | Cloutier, Sylvain G. | Coallier, François | Constantin, Nicolas | Dao, Thien-My | David, Éric | De Kelper, Bruno | Demarquette, Nicole R. | Demers, Vincent | Desharnais, Jean-Marc | Deslandes, Dominic | Dessaint, Louis-A. | Dias de Assuncao, Marcos | Doré, Sylvie | Doutres, Olivier | Dubé, Jean-Sébastien | Dubé, Martine | Dufresne, Louis | Dumouchel, Pierre | Dziong, Zbigniew | El boussaidi, Ghizlane | Fimbel, Éric | Forgues, Daniel | Fortin Blanchette, Handy | François, Véronique | Fuhrman, Christopher | Gabrea, Gheorghe Marcel | Gagnon, François | Gargour, Christian | Gauthier, Guy | Germain, Patrick | Gharbi, Ali | Gherbi, Abdelouahed | Granger, Éric | Guilbault, Raynald | Hagemeister, Nicola | Hallé, Stéphane | Harker, Matthew | Hausler, Robert | Hof, Lucas | Iordanova, Ivanka | Jahazi, Mohammad | Joncas, Simon | Kadoch, Michel | Kajl, Stanislaw | Kara, Nadjia | Kenné, Jean-Pierre | Kouki, Ammar B. | Lameiras Koerich, Alessandro | Landry, Jacques-André | Landry, René Jr | Langar, Rami | Lapalme, James | Laporte, Claude Y. | Laville, Frédéric | Leconte, Robert | Lefebvre, Éric | Lejeune, Michel | Lemieux, Sylvain | Lepage, Richard | Lerouge, Sophie | Lina, Jean-Marc | Liu, Zhaoheng | Lopez-Herrejon, Roberto E. | Lê, Van Ngan | Maranzana, Roland | Maref, Wahid | Masounave, Jacques | Masson, Christian | McGuffin, Michael John | Melhado, Silvio | Moha, Naouel | Monette, Frédéric | Morency, François | Moustapha, Hany | Nabki, Frédéric | Nadeau, Sylvie | Nerguizian, Vahé | Nguyen-Tri, Phuong | Ngô, Anh Dung | Nikiema, Josiane | Nollet, Marie-José | Noumeir, Rita | Nuño, Natalia | Paquet, Marc | Paquette, Eric | Perraton, Daniel | Petit, Yvan | Pham, Tan | Ramudhin, Amar | Rioux, Michel | Rivard, Hugues | Rivest, Louis | Robert, Jean-Marc | Rousse, Daniel R. | Saad, Maarouf | Sabourin, Robert | Samson, Claire | Sankar, Thiagas S. | Seers, Patrice | Soulaïmani, Azzeddine | St-Amand, André | St-Jacques, Michèle | Suryn, Witold | Tadj, Chakib | Tahan, Antoine | Talhi, Chamseddine | Terriault, Patrick | Terrier, Philippe | Thibeault, Claude | Thomas, Marc | Toews, Matthew | Ung, Bora | Viens, Martin | Voix, Jérémie | Vu, Viet Hung | Vu-Khanh, Toan | Vázquez, Carlos | Weiss, Julien | Wong, Tony | Yeste Ojeda, Omar Artemi | Zhang, Gaixia | Zhani, Mohamed Faten | de Guise, Jacques A. Number of items: 881. Abran, Alain
April, Alain, Huffman Hayes, Jane, Abran, Alain and Dumke, Reiner.
2005.
« Software maintenance maturity model (SMmm): the software maintenance process model ».
Journal of Software Maintenance and Evolution: Research and Practice, vol. 17, nº 3.
pp. 197-223.
April, Alain, Abran, Alain and Dumke, Reiner.
2005.
« What do you need to know about software maintenance ».
Maintenance & Asset Management, vol. 20, nº 2.
pp. 32-37.
Abran, Alain and Paré, Dominic.
2005.
« Obvious outliers in the ISBSG repository of software projects : exploratory research ».
Metrics News, vol. 10, nº 1.
pp. 28-36.
Abran, Alain, Al-Qutaish, Rafa E. and Desharnais, Jean-Marc.
2005.
« Harmonization issues in the updating of ISO standards on software product quality ».
Metrics News , vol. 10, nº 2.
pp. 35-44.
Abran, Alain, Desharnais, Jean-Marc and Azziz, F..
2005.
« Measurement convertibility : from function points to COSMIC-FFP ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montreal, Canada, Sept.12-14, 2005)
pp. 227-240.
Aachen, Germany : Shaker Verlag.
Al Qutaish, Rafa E. and Abran, Alain.
2005.
« An analysis of the design and definitions of halstead's metrics ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montreal, Canada, Sept. 12-14, 2006)
pp. 337-352.
Aachen, Germany : Shaker Verlag.
Buglione, Luigi and Abran, Alain.
2005.
« Software measurement body of knowledge - overview of empirical support ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montreal, Canada, Sept. 12-14, 2005)
pp. 353-368.
Aachen, Germany : Shaker Verlag.
Cheikhi, Laila, Abran, Alain and Lopez, Miguel.
2005.
« Analysis of the designs of coupling measures - a case study ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montréal, Canada, Sept.12-14, 2005)
pp. 435-454.
Aachen, Germany : Shaker Verlag.
Déry, David and Abran, Alain.
2005.
« Investigation of the effort data consistency in the ISBSG repository ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montréal, Canada, Sept.12-14, 2005)
pp. 123-136.
Aachen, Germany : Shaker Verlag.
Lopez, Miguel, Abran, Alain, Seront, Grégoire and Habra, Naji.
2005.
« On the impact of the types conversion in java onto the coupling measurement ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montreal, Canada, Sept. 12-14, 2005)
pp. 401-414.
Aachen, Germany : Shaker Verlag.
Talib, Manar Abu, Abran, Alain and Ormandjieva, Olga.
2005.
« COSMIC-FFP & functional complexity (FC) measures: a study of their scales, units and scale types ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montreal, Canada, Sept. 12-14, 2005)
pp. 209-225.
Aachen, Germany : Shaker Verlag.
Buglione, Luigi and Abran, Alain.
2005.
« Improving measurement plans form multiple dimensions : exercising with balancing multiple dimensions - BMP ».
In Workshop Methods for Learning Metrics (Como, Italy, Sept. 19-22, 2005)
Abran, Alain. 2005. « Software measurement is maturing to international standards ». Communication lors de la conférence : Universidad Politécnica de Madrid (Madrid, Spain, June 7, 2005). Abran, Alain. 2005. « Metrics or measures? Which one would you better trust? ». Communication lors de la conférence : Universidad del Pais Vasco (San Sebastian, Spain, June 3, 2005). Abran, Alain. 2005. « Génie logiciel et gestion de projets : Le mariage SWEBOK ». Communication lors de la conférence : PMI-Montréal (Project Management Institute) (Montréal, QC, Canada, 5 oct. 2005).
Suryn, Witold and Girard, Daniel.
2005.
« Suryn-Abran consolidated quality lifecycle (CQL) model - The applicative evolution ».
In Business Information System 2005 - 8th International Conference on Business Information Systems (Poznan, Poland, Apr. 20-22, 2005)
pp. 126-146.
Poznan, Poland : Uniwersytet Ekonomiczny w Poznaniu.
Mendes, Olavo and Abran, Alain.
2005.
« Issues in the development of an ontology for an emerging engineering discipline ».
In 17th International Conference on Software Engineering and Knowledge Engineering, SEKE 2005 (Taipei, Taiwan, July 14-16, 2005)
pp. 139-144.
Stokie, IL, USA : Knowledge Systems Institute Graduate School.
Abran, Alain, Moore, James W., Bourque, Pierre, Dupuis, Robert and Tripp, Leonard L..
2005.
« An international consensus on the software engineering body of knowledge ».
In ONTOSE 2005 - Proceedings of the 1st International Workshop on Ontology, Conceptualizations and Epistemology for Software and Systems Engineering (Alcala de Henares, Madrid, Spain, June 9-10, 2005)
Coll. « CEUR Workshop Proceedings », vol. 163.
Netherlands : Sun SITE Central Europe CEUR-WS.
Buglione, Luigi and Abran, Alain.
2005.
« Multidimensional project management tracking & control : related measurement issues ».
In Software Measurement European Forum (SMEF) : Proceedings of SMEF 2005 (Rome, Italy, Mar. 16-18, 2005)
pp. 205-214.
Talib, Manar Abu, Ormandjieva, Olga, Abran, Alain and Buglione, Luigi.
2005.
« Scenario-based Black-Box Testing in COSMIC-FFP ».
In Software Measurement European Forum (SMEF) : Proceedings of SMEF 2005 (Rome, Italy, Mar. 16-18, 2005)
pp. 173-182.
Abran, A. and Garbajosa, J..
2005.
« Estimating the required test volume and effort for software verification and validation ».
In First Annual ESA Workshop on Spacecraft Data Systems and Software (SDSS 2005) (Noordwijk, The Netherlands, Oct. 17-20, 2005)
ESTEC. Abran, Alain. 2005. « A multidimensional performance model for consolidating balance scorecards ». Communication lors de la conférence : Statistics Canada's information technology (IT) Conference 2005 (Ottawa, ON, Canada, Apr. 6-7, 2005). Abran, Alain. 2005. « COSMIC-FFP: from its initial design to its acceptance as an international standard ». Communication lors de la conférence : First Workshop on Ontology, Conceptualization, Epistomology for Software and Systems Engineering (ONTOSE) (Alcala, Spain, June 9-10, 2005). Abran, Alain. 2005. « Development of an International Consensus on the Software Engineering Body of Knowledge (SWEBOK) ». Communication lors de la conférence : First Workshop on Ontology, Conceptualization, Epistomology for Software and Systems Engineering (ONTOSE) (Alcala, Spain, June 9-10, 2005). Abran, Alain. 2005. « Génie logiciel et gestion de projets: Le marriage SWEBOK ». Communication lors de la conférence : Atelier de formation au congrès PMI-Montréal (Montréal, QC, Canada, 5 Oct. 2005). Abran, Alain. 2005. « ISO 90003 : Lignes directrices pour l’application d’ISO 9001:2000 aux logiciels ». Communication lors de la conférence : 6ièmes journées d’études en informatique : certification des logiciels selon les normes ISO (Hammamet, Tunisie, July 12-16, 2005).
Abran, Alain, Al Qutaish, Rafa E., Desharnais, Jean-Marc and Habra, Naji.
2005.
« An information model for software quality measurement with ISO standards ».
In International Conference on Software Development (SWDC-REK) (Reykjavik, Iceland, May 27-June 1, 2005)
pp. 104-116.
Abran, Alain and Garbajosa-Sopena, J..
2005.
« Estimating software validation required test volume and effort ».
In 1st Annual ESA Workshop on Spacecraft Data Systems and Software (SDSS) (Noordwijk, Netherlands, Oct. 17-20, 2005)
European Space Research and Technology Centre (ESTEC). Bourque, P., Dupuis, R., Abran, A., Moore, J. and Tripp, L.. 2005. « An international consensus on the software engineering body of knowledge ». Communication lors de la conférence : MITEL (Ottawa, ON, Canada, Feb. 10, 2005). Bourque, P., Dupuis, R., Abran, A., Moore, J. and Tripp, L.. 2005. « Le guide du corpus de connaissance en génie logiciel ». Communication lors de la conférence : Ordre des Ingénieurs du Québec (Gatineau, QC, Canada, 10 fév. 2005). Bourque, Pierre, Dupuis, R., Abran, Alain, Moore, J. and Tripp, L.. 2005. « Le guide du corpus de connaissances en génie logiciel ». Communication lors de la conférence : Section régionale de l'Outaouais, Ordre des ingénieurs du Québec (Gatineau, QC, Canada).
Buglione, Luigi and Abran, Alain.
2005.
« A model for performance management and estimation ».
In IEEE International Symposium on Software Metrics (2005) (Como, Italy, Sept. 19-22, 2005)
IEEE Computer Society.
Molinie, Luis, Olleros, Xavier and Abran, Alain.
2005.
« Open source technology adoption : an exploratory study of Linux market share ».
In IPSI-2005 France Conference (Carcassonne, France, Apr. 23-26, 2005)
Sellami, Asma and Abran, Alain.
2005.
« Analyse de COSMIC-FFP selon la perspective de métrologie ».
In 5e Journée Scientifique des Jeunes Chercheurs en Génie Électrique et Informatique (GEI) (Sousse, Tunisie, 25-27 mars 2005)
pp. 19-25.
Aissaoui, Rachid
Dumas, Raphaël, Aissaoui, Rachid, Mitton, David, Skalli, Wafa and de Guise, Jacques A..
2005.
« Personalized body segment parameters from biplanar low-dose radiography ».
IEEE Transactions on Biomedical Engineering, vol. 52, nº 10.
pp. 1756-1763. Barré, A., Aissaoui, Rachid and Nuño, Natalia. 2005. « Estimation of knee contact forces during gait ». Affiche présentée lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, May 6, 2005).
Li, Yue, Aissaoui, Rachid, Boivin, Karine, Turcot, Katia, Duval, Nicolas, Roy, André, Pontbriand, Robert, Hagemeister, Nicola and de Guise, Jacques A..
2005.
« Development of a tool for analyzing 3D knee kinematic characteristics of different daily activities ».
In IEEE 27th Annual International Conference of the Engineering in Medicine and Biology Society (EMBS) (Shanghai, China, Aug. 31-Sept. 3, 2005)
pp. 7451-7454.
Piscataway, N.J. : Institute of Electrical and Electronics Engineers Inc.. Turcot, K., Boivin, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Approche biomécanique 3D pour l'évaluation de patients gonarthrosiques : faisabilité et résultats préliminaires ». Affiche présentée lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005). Mecheri, H., Aissaoui, Rachid, Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Comparison of two finite helical algorithms on the determination of the finite screw axis of the human knee joint ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Li, Y., Aissaoui, Rachid, Boivin, K., Turcot, K., Duval, N., Roy, A., Pontbriand, R., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Development of a tool for analyzing 3D knee kinematic characteristics of different daily activities ». Communication lors de la conférence : IEEE 27th Annual International Conference of the Engineering in Medicine and Biology Society (EMBS) (Shanghai, China, Aug. 31-Sept. 3, 2005). Khelia, I., Aissaoui, Rachid, Nadeau, Sylvie and Bourbonnais, D.. 2005. « Étude préliminaire de l'effet du réglage de l'angle de l'assise et du dossier sur la biomécanique de la propulsion en fauteuil roulant manuel chez les personnes paraplégiques ». Communication lors de la conférence : 4e Colloque Positionnement et Mobilité (Saint-Hyacinthe, QC, Canada, 4-5 avril 2005). Imen, K., Aissaoui, Rachid, Nadeau, Sylvie and Bourbonnais, D.. 2005. « Effets des réglages de l'interface séant-siège du fauteuil roulant manuel sur la mobilité des adultes ayant une paraplégie ». Communication lors de la conférence : Congrès du Réseau Provincial de Recherche en Adaptation-Réadaptation (REPAR) (Québec, QC, Canada, 12 mai 2005). Desroches, G., Aissaoui, Rachid, Bourbonnais, D. and Perron, C.. 2005. « The effect of force direction at the hub on joint moments in the upper extremities during manual wheelchair propulsion ». Communication lors de la conférence : 10th Annual Conference of the International Functional Electrical Stimulation Society (FESS) (Montreal, QC, Canada, July 5, 2005). Desroches, G., Aissaoui, Rachid and Bourbonnais, D.. 2005. « L'effet de l'angle d'assise sur les moments de force à l'épaule chez une population âgée, lors de la propulsion manuelle en fauteuil roulant ». Communication lors de la conférence : Journée Scientifique du Réseau d'Adaptation et de Réadaptation du Québec (REPAR) (Montréal, QC, Canada, 12 mai 2005). Desroches, G., Aissaoui, Rachid and Bourbonnais, D.. 2005. « Evaluation of the load induced to the upper limbs by different force direction at the wheel during manuel wheelchair propulsion ». Communication lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, May 6, 2005). Bergeron, C., Bourbonnais, D. and Aissaoui, Rachid. 2005. « Modélisation biomécanique des mouvements du tronc en position assise chez les sujets hémiparétiques suite à un accident vasculaire cérébral ». Communication lors de la conférence : 3e Édition du Carrefour des Connaissances (CRIR) (Montréal, QC, Canada, 12 avril 2005). Barré, A., Aissaoui, Rachid, Nuño, Natalia and de Guise, Jacques A.. 2005. « Estimation des forces de contact fémoro-tibiales lors de la marche ». Communication lors de la conférence : 8e Congrès des Étudiants du CRCHUM (Montréal, QC, Canada, 20 déc. 2005). Aissaoui, Rachid, Li, Y., Boivin, K., Turcot, K., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Utilisation de l'exosquelette pour l'analyse cinématique tridimensionnelle du genou chez la personne valide et atteinte de gonarthrose: perspective clinique ». Communication lors de la conférence : 3e Journée Annuelle de Recherche en Orthopédie (Lausanne, Suisse, 1 juil. 2005). Aissaoui, Rachid, Desroches, G., Dumas, R. and Bourbonnais, D.. 2005. « Effet du positionnement sur la biomécanique de la propulsion en fauteuil roulant manuel chez la personne âgée ». Communication lors de la conférence : 11ème Journée Thématique de la Société de Biomécanique (Lyon, France, 11 mai 2005). Charbonneau, M., Husse, S., Parent, G., Fuentes Dupré, A., Aissaoui, Rachid, Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Toward the use of 3D motion capture in clinical setting, from the lab to clinics ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005).
Desroches, Guillaume, Aissaoui, Rachid, Bourbonnais, Daniel and Perron, Christian Y..
2005.
« The effect of force direction at the pushrim on joint moments in the upper extremities during manual wheelchair propulsion ».
In 10th Annual Conference of the International Functional Electrical Stimulation Society (IFESS 2005) (Montreal, QC, Canada, July 5-9, 2005)
pp. 338-340.
International Functional Electrical Stimulation Society. Li, Y., Aissaoui, Rachid, Boivin, K., Turcot, K., Duval, N., Roy, A., Pontbriand, R., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Is static knee alignment angle related to dynamic knee adduction/abduction angles during bilateral squatting? ». Communication lors de la conférence : 8e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montreal, QC, Canada, Dec. 20, 2005). Li, Y., Aissaoui, Rachid, Charbonneau, M., Husse, S., Fuentes Dupré, A. and de Guise, Jacques A.. 2005. « Gait pattern classification of healthy subjects based on kinematic parameters ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005).
Turcot, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A..
2005.
« Measurement of knee joint impact during gait with three-dimensional linear accelerations: reproducibility on a medial knee osteoarthritis population ».
[Conference paper summary]. Osteoarthritis and Cartilage, vol. 13, nº Suppl. A.
S77. Turcot, K., Boivin, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « 3D biomechanical measurement of shock loading during treadmill walking: reliability on an elderly population ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Akhrif, Ouassima
Kaddouri, Azeddine, Blais, Sebastien, Ghribi, Mohsen and Akhrif, Ouassima.
2005.
« New software dedicated to the design and simulation of Nonlinear controllers based on feedback linearization technique ».
GESTS International Transactions on Computer Science and Engineering, vol. 20, nº 1.
pp. 12-13.
Kaddouri, Azeddine, Blais, Sebastien, Ghribi, Mohsen and Akhrif, Ouassima.
2005.
« An interactive software for designing nonlinear controllers based on feedback linearization technique ».
IEEE Canadian Review = Revue Canadienne de l'IEEE, nº 49.
pp. 15-18.
Okou, A. F., Akhrif, Ouassima and Dessaint, Louis-A..
2005.
« Decentralized multivariable voltage and speed regulator for large-scale power systems with guarantee of stability and transient performance ».
International Journal of Control , vol. 78, nº 17.
pp. 1343-1358.
Okou, A.F., Dessaint, Louis-A. and Akhrif, Ouassima.
2005.
« Power systems stability enhancement using a wide-area signals based hierarchical controller ».
IEEE Transactions on Power Systems , vol. 20, nº 3.
pp. 1465-1477.
Garcia, Sixto E., Saad, Maarouf and Akhrif, Ouassima.
2005.
« Detecting convergence in genetic algorithms with decreasing mutation policies ».
In Proceedings of the IASTED International Conference on Computational Intelligence (Calgary, Canada, Jul. 4-6, 2005)
pp. 369-374.
Anaheim, CA, USA : ACTA Press.
Kaddouri, A., Blais, S., Ghribi, M. and Akhrif, Ouassima.
2005.
« NLSOFT : an interactive software for designing nonlinear controllers ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamat, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Okou, A.F., Dessaint, Louis-A. and Akhrif, Ouassima.
2005.
« Smith prediction approach for the design of a robust wide-area measurements based hierarchical controller ».
In IEEE Power Engineering Society General Meeting (PES) (Montreal, Canada, June 12-16, 2005)
pp. 1448-1454.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Okou, A.F., Dessaint, Louis-A. and Akhrif, Ouassima.
2005.
« Globally stabilizing robust adaptive voltage and speed regulator for large-scale power systems ».
In 44th IEEE Conference on Decision and Control and European Control Conference (CDC-ECC) (Seville, Spain, Dec.12-15, 2005)
pp. 6472-6479.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Saussié, David, Saydy, Lahcen and Akhrif, Ouassima.
2005.
« Robust and scheduled flight control with handling quality requirements ».
In AIAA Guidance, Navigation, and Control Conference and Exhibit (San Francisco, CA, USA, Aug.15-18, 2005)
Coll. « AIAA paper »
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Okou, Francis A., Dessaint, Louis-A. and Akhrif, Ouassima.
2005.
« A robust adaptive voltage and speed regulator for multimachine power systems ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 30, nº 1.
pp. 29-38. Al Haddad, Kamal
Ghatak Choudhuri, Sumit, Singh, B., Chandra, Ambrish and Al Haddad, Kamal.
2005.
« A comparative study of power quality improvements in six-pulse AC-DC converter fed vector controlled induction motor drive ».
IEEMA Journal, vol. 25, nº 5.
pp. 54-57.
Kanaan, H., Al Haddad, Kamal and Fnaiech, F..
2005.
« Modelling and control of three-phase/switch/level fixed-frequency PWM rectifier: state-space averaged model ».
IEE Proceedings - Electric Power Applications, vol. 152, nº 3.
pp. 551-557.
Kanaan, Hadi and Al Haddad, Kamal.
2005.
« Évaluation comparative des techniques de commande par MLI et par hystérésis : Application au redresseur triphasé à injection de courant ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 30, nº 4.
pp. 215-233.
Singh, B., Verma, V., Chandra, Ambrish and Al Haddad, Kamal.
2005.
« Hybrid filters for power quality improvement ».
IEE Proceedings - Generation, Transmission and Distribution, vol. 152, nº 3.
pp. 365-378.
Singh, B.N., Rastgoufard, P., Singh, B., Chandra, Ambrish and Al Haddad, Kamal.
2005.
« Design and digital implementation of active filter with power balance theory ».
IEE Proceedings - Electric Power Applications, vol. 152, nº 5.
pp. 1149-1160.
Yacoubi, L., Al Haddad, Kamal, Dessaint, Louis-A. and Fnaiech, F..
2005.
« A DSP-based implementation of a nonlinear model reference adaptive control for a three-phase three-level NPC boost rectifier prototype ».
IEEE Transactions on Power Electronics, vol. 20, nº 5.
pp. 1084-1092.
Bel Haj Youssef, Nesrine and Al-Haddad, Kamal.
2005.
« Adaptive nonlinear control of a Single-Phase AC/DC Dual Boost ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
pp. 1-6.
Montréal, Qué., Canada : École de technologie supérieure.
Blanchette, Handy and Al Haddad, Kamal.
2005.
« A new discrete packaging configuration of bidirectional power switch with less magnetic interference ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Saskatoon, Canada, May 1-4, 2005)
pp. 1278-1282.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Chatterjee, K., Chandra, Ambrish and Al Haddad, Kamal.
2005.
« PLL-less one-cycle controlled modified load compensator for wide range of loads ».
In IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 12-16, 2005)
pp. 2322-2326.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Fleury, Pascal and Al Haddad, Kamal.
2005.
« Universal input voltage, unity power factor, high efficiency flyback rectifier with regenerative snubber ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Saskatoon, Canada, May 1-4, 2005)
pp. 595-598.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, H. and Al Haddad, Kamal.
2005.
« A novel averaged-model-based control of a SEPIC power factor corrector using the input/output feedback linearization technique ».
In IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 12-16, 2005)
pp. 565-571.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, Hadi Y. and Al Haddad, Kamal.
2005.
« Switching-functions-based modelig of a three-phase three-switch three-level rectifier in continuous and discontinuous modes for real-time simulations ».
In Twenty-Seventh International Telecommunications Conference (INTELEC) (Berlin, Germany, Sept. 18-22, 2005)
pp. 461-465.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, H.Y. and Al Haddad, Kamal.
2005.
« A comparative analysis of nonlinear current control schemes applied to a SEPIC power factor corrector ».
In 31st Annual Conference of IEEE Industrial Electronics Society (IECON) (Raleigh, NC, USA, Nov. 6-10. 2005)
pp. 1104-1109.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, H.Y. and Al Haddad, Kamal.
2005.
« Modeling and simulation of DC-DC power converters in CCM and DCM using the switching functions approach: application to the buck and cùk converters ».
In 6th IEEE International Conference on Power Electronics and Drive Systems (PEDS) (Kuala Lumpur, Malaysia, Nov. 28-Dec. 1, 2005)
pp. 468-473.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, Hadi Youssef, Al Haddad, Kamal and Fnaiech, Farhat.
2005.
« A study on the effects of the neutral inductor on the modeling and performance of a four-wire three-phase/switch/level fixed-frequency rectifier ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Kanaan, Hadi Y., Boulos, Riad, Asmar, Claude and Al Haddad, Kamal.
2005.
« Desing, modeling and simulation of an AC-DC-AC transmission system with low AC-current distortion and DC-voltage regulation ».
In Twenty-Seventh International Telecommunications Conference (INTELEC) (Berlin, Germany, Sept. 18-22, 2005)
pp. 59-61.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Labben-Ben Braiek, Mongia, Sahbani, A., Dami, M. A., Jemli, M., Fnaiech, Farhat and Al Haddad, Kamal.
2005.
« A fuzzy logic controller method for compensating reactive power energy in a three phase active power filtering ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
pp. 1-6.
Montréal, Qué., Canada : École de technologie supérieure.
Mandache, Lucian and Al Haddad, Kamal.
2005.
« New high precision harmonic analysis method for power quality assessement ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Saskatoon, Canada, May 1-4, 2005)
pp. 1958-1961.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rahmani, Salem, Al Haddad, Kamal and Kanaan, Hadi Y..
2005.
« A comparative study of shunt hybrid and shunt active power filters for single-phase applications: simulation and experimental validation ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Rahmani, S., Al Haddad, Kamal and Kanaan, H. Y..
2005.
« Implementation and simulation of a modified PWM with two current control techniques applied to a single-phase shunt hybrid power filter ».
In IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 16, 2005)
pp. 2345-2350.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rahmani, S., Al Haddad, Kamal and Kanaan, H. Y..
2005.
« A comparative study of two PWM techniques for single-phase shunt active power filters employing direct current control strategy ».
In IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 16, 2005)
pp. 2758-2763.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rahmani, S., Al Haddad, Kamal and Kanaan, H.Y..
2005.
« Observer based reference current generation for a three-phase shunt active power filter ».
In 31st Annual Conference of IEEE Industrial Electronics Society (IECON) (Raleigh, NC, USA, Nov. 6-10, 2005)
pp. 1323-1328.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rahmani, S., Al Haddad, Kamal and Kannan, H.Y..
2005.
« Experimental design and simulation of a modified PWM with an indirect current control technique applied to a single-phase shunt active power filter ».
In Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE) (Dubrovnik, Croatia, June 20-23, 2005)
pp. 519-524.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Thibault, Robert, Al Haddad, Kamal and Dessaint, Louis-A..
2005.
« A new control algorithm for 3-phase PWM voltage source converters connected to the grid ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Saskatoon, Canada, May 1-4, 2005)
pp. 1274-1277.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Yacoubi, Loubna, Al-Haddad, Kamal, Fnaiech, Farhat and Dessaint, Louis-A..
2005.
« A DSP-based implementation of a new nonlinear control for a three-phase neutral point clamped boost rectifier prototype ».
IEEE Transactions on Industrial Electronics, vol. 52, nº 1.
pp. 197-205. Rahmani, S., Al Haddad, Kamal and Kanaan, H.. 2005. « A comparative study of two PWM techniques for single-phase shunt active power filters employing direct current control strategy ». Communication lors de la conférence : IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 12-16, 2005). Rahmani, S., Al Haddad, Kamal and Kanaan, H.. 2005. « Implementation and simulation of a modified PWM with two current control techniques applied To a single-phase shunt shybrid power filter ». Communication lors de la conférence : IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 12-16, 2005). Kanaan, H. and Al Haddad, Kamal. 2005. « A novel averaged-model-based control of a SEPIC power factor corrector using the imput/output feedback linearization technique ». Communication lors de la conférence : IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 12-16, 2005). Chatterjee, K., Chandra, Ambrish and Al Haddad, Kamal. 2005. « PLL-less one-cycle controlled modified load compensator for wide range of loads ». Communication lors de la conférence : IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 12-16, 2005).
Charfi, F., Al Haddad, Kamal and Sellami, F..
2005.
« Analysis and identification of embedded power system faults using wavelet transform ».
In 21st International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition 2005, EVS 2005 (Monte Carlo, Monaco, April 02-06, 2005)
pp. 224-233.
Electric Drive Transportation Association.
Hamouda, M., Fnaiech, F. and Al-Haddad, K..
2005.
« Space vector modulation scheme for dual-bridge matrix converters using safe-commutation strategy ».
In 31st Annual Conference of IEEE Industrial Electronics Society (IECON) (Raleigh, NC, USA, Nov. 06-10, 2005)
pp. 1060-1065.
IEEE Industrial Electronics Society.
Mandache, L. and Al-Haddad, K..
2005.
« Ideal lowpass filter technique to enhance harmonic spectrum estimation for power electronics circuits ».
In 31st Annual Conference of IEEE Industrial Electronics Society (IECON) (Raleigh, NC, USA, Nov. 06-10, 2005)
pp. 958-963.
IEEE Industrial Electronics Society.
Musavi, F., Al-Haddad, K. and Kanaan, H. Y..
2005.
« A large signal averaged modelling and control of paralleled DC/DC converters with automatic load sharing ».
In Twentieth Annual IEEE Applied Power Electronics Conference and Exposition (APEC)
pp. 1353-1358.
IEEE. April, Alain
Laporte, Claude Y., April, Alain and Renault, Alain.
2005.
« L'application des normes de génie logiciel dans les très petites entreprises: historiques et premiers résultats ».
Génie Logiciel, nº 75.
pp. 7-12.
April, Alain, Huffman Hayes, Jane, Abran, Alain and Dumke, Reiner.
2005.
« Software maintenance maturity model (SMmm): the software maintenance process model ».
Journal of Software Maintenance and Evolution: Research and Practice, vol. 17, nº 3.
pp. 197-223.
April, Alain, Abran, Alain and Dumke, Reiner.
2005.
« What do you need to know about software maintenance ».
Maintenance & Asset Management, vol. 20, nº 2.
pp. 32-37.
April, Alain and Desharnais, Jean-Marc.
2005.
« Software maintenance expert system (SMxpert) - measuring the use of the knowledge base ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montreal, Canada, Sept. 12-14, 2006)
pp. 95-103.
Aachen, Germany : Shaker Verlag. Laporte, Claude Y. and April, Alain. 2005. « Applying software engineering standards in small settings : recent perspectives and initial achievement ». Communication lors de la conférence : 1st International Research Workshop for Process Improvement in Small Settings (Pittsburgh, PA, USA, Oct. 19-20, 2005). April, Alain. 2005. « SMCMM : software maintenance capability maturity model ». Communication lors de la conférence : Statistics Canada - Information Technology (IT) Conference (Ottawa, ON, Canada, Apr. 6-7, 2005).
April, Alain and Desharnais, Jean-Marc.
2005.
« Software maintenance expert system (SMxpert) : a decision support intrument ».
In Proceedings of the seventh International Conference on Enterprise Information Systems (ICEIS) (Miami, FL, USA, May 24-28, 2005)
pp. 142-148.
Institute for Systems and Technologies of Information, Control and Communication.
April, Alain.
2005.
« S3m-model to evaluate and improve the quality of software maintenance process ».
Aachen, Germany : Shaker Verlag. 226 p.
Laporte, Claude Y. and April, Alain.
2005.
« Applying software engineering standards in small settings : recent historical perspectives and initial achievement ».
In 1st International Research Workshop for Process Improvement in Small Settings (Pittsburgh, PA, USA, Oct. 19-20, 2005)
pp. 1-9.
Software Engineering Institute. April, Alain. 2005. « S3M - Software maintenance maturity model ». Communication lors de la conférence : Statistic Canada 2005 Conference (Ottawa, ON, Canada). Arteau, Jean
Arteau, Jean, Nadeau, Sylvie, Ngô, Anh Dung and Rivet, Pierre.
2005.
« La santé et la sécurité du travail en milieu universitaire: des choix proactifs ».
In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005)
Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.
Arteau, Jean.
2005.
« Protection contre les chutes de hauteur : de nouveaux absorbeurs d'énergie pour les personnes de fortes tailles CAN/CSA-Z259.11-05 ».
In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005)
Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.
Arteau, Jean and Lan, André.
2005.
« Une nouvelle norme pour la conception des systèmes actifs de protection contre les chutes de hauteur CAN/CSA-Z259.16-04 ».
In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005)
Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.
Lan, André, Arteau, Jean and Daigle, Renaud.
2005.
« Développement et validation d'une méthode d'évaluation des garde-corps fabriqués et installés à pied d'oeuvre sur les chantiers ».
Coll. « Études et Recherches », vol. R-415.
Montréal : IRSST. 170 p. Artiba, Abdelhakim
Bardey, D., Riane, F., Artiba, Abdelhakim and Eeckhoudt, L..
2005.
« To maintain or not to maintain? What should a risk-averse decision maker do? ».
Journal of Quality in Maintenance Engineering, vol. 11, nº 2.
pp. 115-120.
Duvivier, D., Artiba, Abdelhakim and Dhaevers, V..
2005.
« Simulation based performance measurement and analysis: an industrial application ».
International Journal of Computer Integrated Manufacturing , vol. 18, nº 5.
pp. 402-407.
Jamali, M. A., Ait-Kadi, D., Cléroux, R. and Artiba, Abdelhakim.
2005.
« Joint optimal periodic and conditional maintenance strategy ».
Journal of Quality in Maintenance Engineering, vol. 11, nº 2.
pp. 107-114.
Allaoui, Hamid and Artiba, Abdelhakim.
2005.
« Integrating simulation and optimization to schedule a hybrid flow shop with maintenance constraints ».
Computers and Industrial Engineering, vol. 47, nº 4.
pp. 431-450.
Allaoui, H., Artiba, Abdelhakim and Aghezzaf, E..
2005.
« Jointly scheduling n jobs and preventive maintenance on the two machine flow shop to minimize makespan ».
In Industrial Engineering and System Management (IESM) (Marrakech, Morocco, May 16-19, 2005)
Allaoui, H., Artiba, Abdelhakim and El Mhmedi, A..
2005.
« Stochastic scheduling of two machine flow shop with an availability constraint to minimize expected makespan ».
In 35th Conference on Computers & Industrial Engineering (Istanbul, Turkey, June 19-22, 2005)
pp. 93-98.
Artiba, Abdelhakim, Fenies, P. and Tchernev, N..
2005.
« La modélisation d'une unité générique de soins pour le système d'information et d'aide à la décision de la supply chain du nouvel hôpital d'Estaing ».
In Conception et Production Intégrées (CPI) (Casablanca, Maroc, 9-11 nov. 2005)
Lassinovski, S., Artiba, Abdelhakim and Fagnart, C..
2005.
« A generic production rules-based system for on-line simulation, decision making and discrete process control ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Marrakech, Morocco, May 16-19, 2005)
Ramudhin, Amar, Paquet, Marc, Artiba, Abdelhakim, Varvaro, D., Thomson, V., Dupré, P. and Dumouchel, M..
2005.
« Maintenance, repair and overhaul activities in aeronautic industry : a framework to support the design and deployment of a new control strategy using radio frequency identification technology ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Marrakech, Morocco, May 16-19, 2005)
pp. 1261-1270.
Assi, RolaAssi, Rola. 2005. « Seismic floor acceleration demands in buildings ». Communication lors de la conférence : Centre d’Infrastructures Sismiques Majeures Interuniversitaires du Québec (CISMIQ) annual meeting (Montreal, QC, Canada, May 27, 2005).
Assi, Rola, McClure, Ghyslaine and Yao, George C..
2005.
« Floor acceleration demands for 11 instrumented buildings in Taiwan during the 1999 Chi Chi earthquake ».
In 2005 Structures Congress and the 2005 Forensic Engineering Symposium - Metropolis and Beyond (New York, NY, USA, April 20-24, 2005)
Coll. « Proceedings of the Structures Congress and Exposition »
pp. 1937-1947.
American Society of Civil Engineers. McGlure, G. and Assi, R.. 2005. « Seismic amplification factors for telecommunication towers mounted on building rooftops ». Communication lors de la conférence : 2005 meeting of the IASS Working Group 4 on Masts and Towers (Moscow, Russia, Sept. 11-15, 2005). Bauer, Dominique Bernard
Bauer, Dominique Bernard and Elmaraghy, R..
2005.
« Efficient virtual model with configurable views for the construction industry ».
In North American Steel Construction Conference (Montreal, QC, Canada, Apr. 6-9, 2005)
pp. 1-7.
Chicago, USA : American Institute of Steel Construction.
Abi-Saad, Georges, Benaddi, A. and Bauer, Dominique Bernard.
2005.
« Shear lag in tension member welded connection ».
In Proceedings - 33rd CSCE Annual Conference 2005: General Conference and International History Symposium (Toronto, ON, Canada, June 2-4, 2005)
GC-246-1-10.
Montreal, Canada : Canadian Society for Civil Engineering.
Elmaraghy, R. and Bauer, Dominique Bernard.
2005.
« Software integration in the construction industry ».
In Proceedings - 33rd CSCE Annual Conference 2005: 6th Construction Specialty Conference (Toronto, ON, Canada, June 2-4, 2005)
CT-150-1-8.
Montreal, Canada : Canadian Society for Civil Engineering.
Takacs, Roger and Bauer, Dominique Bernard.
2005.
« Petites incohérences en ingénierie des structures ».
In Proceedings - 33rd CSCE Annual Conference 2005: General Conference and International History Symposium (Toronto, ON, Canada, 2-4 juin 2005)
GC-245-1-7.
Montreal, Canada : Canadian Society for Civil Engineering. Abi-Saad, G., Benaddi, A. and Bauer, Dominique Bernard. 2005. « Shear lag in tension member welded connections ». Communication lors de la conférence : 12e Conférence Annuelle de la McGill Civil Engineering Graduate Student Society (Montréal, QC, Canada, 31 mars 2005). Belzile, Jean
Ghislain, G., Choquette, F., Belzile, Jean and Gagnon, François.
2005.
« A simple and fast carrier recovery algorithm for high-order QAM ».
IEEE Communications Letters, vol. 9, nº 10.
pp. 918-920.
Uhm, Manuel and Belzile, Jean.
2005.
« Meeting software defined radio cost and power targets: making SDR feasible ».
Military Embedded Systems, vol. 1, nº 1.
pp. 28-30.
Ammari, M., Gagnon, François and Belzile, Jean.
2005.
« Adaptive M-QAM scheme and unbiased MMSE-DFE receiver ».
In IEEE 62nd Vehicular Technology Conference (VTC) (Dallas, USA, Sept. 25-28, 2005)
pp. 1935-1939.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ammari, M., Gagnon, François and Belzile, Jean.
2005.
« On adaptative modulation when the received signal is corrected with imperfect channel estimates ».
In IEEE International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob) (Montreal, Canada, Aug. 22-24, 2005)
pp. 166-170.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ammari, Mohamed L., Gagnon, François and Belzile, Jean.
2005.
« Effect of channel estimation and prediction errors on adaptive M-PSK systems ».
In IEEE Joint International Conference on Autonomic and Autonomous Systems and International Conference on Networking and Services (ICAS-ICNS) (Papeete, Tahiti, French Polynesia, Oct. 23-28, 2005)
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society. Mender, D., Bernier, S. and Belzile, Jean. 2005. « Technical overview OEA complete SDR operating environment (OE), solution ready for SCA-Compliant plateform developpment and deployment ». Communication lors de la conférence : Software Defined Radio Technical Conference and Product Exposition (SDR) (Orange County, CA, USA, Nov. 14-18, 2005).
Jomphe, S., Cheikhrouhou, K., Belzile, J., Affes, S. and Thibault, J. C..
2005.
« Area-efficient advanced multiuser WCDMA receiver ».
In 3rd International IEEE Northeast Workshop on Circuits and Systems Conference (NEWCAS) (Quebec, QC, Canada, June 22, 2005)
pp. 291-294.
Institute of Electrical and Electonics Engineers. Ben Ayed, Ismail
Ben Ayed, Ismail, Mitiche, Amar and Belhadj, Ziad.
2005.
« Level set curve evolution partitioning of polarimetric images ».
In IEEE International Conference on Image Processing, 2005. ICIP 2005 (Genoa, Italy, Sept. 11-14, 2005)
pp. 281-284.
IEEE.
Ben Ayed, Ismail, Mitiche, Amar and Belhadj, Ziad.
2005.
« Multiregion level-set partitioning of synthetic aperture radar images ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 27, nº 5.
pp. 793-800. Bennani, Maria
Rong, Bo, Bennani, Maria, Elhakeem, A.K. and Kadoch, Michel.
2005.
« Traffic engineering extension for traditional QoS multicast routing algorithms ».
In IEEE International Conference on Communications (ICC) (Seoul, South Korea, May 16-20, 2005)
pp. 208-212.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rong, Bo, Lebeau, J., Bennani, Maria, Elhakeem, A.K. and Kadoch, Michel.
2005.
« Modeling and simulation of traffic aggregation based SIP over MPLS network architecture ».
In 38th Annual Simulation Symposium (ANSS) (San Diego, CA, USA, April 4-6, 2005)
pp. 305-311.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Rong, Bo, Tremblay, B., Bennani, Maria and Kadoch, Michel.
2005.
« Integrating traffic aggregation mechanism into SIP based IP telephony over MPLS network ».
In IEEE Global Telecommunications Conference (GLOBECOM) (St-Louis, MO, USA, Nov. 28-Dec. 2, 2005)
pp. 797-801.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rong, Bo, Lebeau, Jacques, Bennani, Maria, Kadoch, Michel and Elhakeem, Ahmed K..
2005.
« Traffic aggregation based SIP over MPLS network architecture ».
In 19th International Conference on Advanced Information Networking and Applications (Taipei, Taiwan, Mar. 28-30, 2005)
pp. 827-832.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Rong, Bo, Bennani, Maria, Kadoch, Michel and Elhakeem, Ahmed K..
2005.
« Bandwidth fragmentation avoided QoS multicast routing by employing admission control ».
In 19th International Conference on Advanced Information Networking and Applications (AINA) (Taipei, Taiwan, Mar. 28-30, 2005)
pp. 273-278.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Bennani, Maria, Azzouz, Rochdi and Kadoch, Michel.
2005.
« Performance analysis of multimedia traffic over Wireless 802.11e EDCF mode ».
In OPNETWORK 2005 (Washington D.C., WA, USA, Aug. 22-26, 2005)
Bennis, Saad
Bennis, Saad and Crobeddu, Éric.
2005.
« La méthode rationnelle généralisée ».
Vecteur Environnement, vol. 38, nº 2.
pp. 41-52.
Bennis, Saad and Crobeddu, Éric.
2005.
« Data acquisition, validation and forecasting for combined sewer network ».
In Twelfth International Conference on Computational Methods and Experimental Measurements (Malta, June 20-22, 2005)
pp. 191-198.
Southampton, UK : WIT Press.
Kamal, Abdelaziz and Bennis, Saad.
2005.
« Effet d'échelle sur la simulation du ruissellement en milieu urbain ».
Revue des Sciences de l'Eau, vol. 18, nº 2.
pp. 225-246. Bennis, Saad and Crobeddu, Éric. 2005. « Outils de gestion des débordements en réseau unitaire ». Communication lors de la conférence : Congrès Internationale Urbistique sur les nouvelles tendances du développement urbain intégré (Montréal, QC, Canada, 23-29 mai 2005). Bigras, Pascal
Bigras, Pascal.
2005.
« Sliding-mode observer as a time-variant estimator for control of pneumatic systems ».
Journal of Dynamic Systems, Measurement, and Control, vol. 127, nº 3.
pp. 499-502.
Bigras, Pascal.
2005.
« Controller design for pneumatic system with connection port restriction: an LMI approach ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 29, nº 1.
pp. 23-40.
Bigras, Pascal.
2005.
« Pressure control of pneumatic system with non negligible connection port restriction ».
Control and Intelligent Systems, vol. 33, nº 2.
pp. 111-118.
Nonnon, P., Cervera, D., Bigras, Pascal and Wong, Tony.
2005.
« Conception et réalisation d'un laboratoire virtuel d'expérimentation en hydraulique et pneumatique ».
Res Academica, vol. 23, nº 2.
pp. 169-187.
Wong, Tony, Bigras, Pascal and Cervera, D..
2005.
« A software application for visualizing and understanding hydraulic and pneumatic networks ».
Computer Applications in Engineering Education, vol. 13, nº 3.
pp. 169-180.
Wong, Tony, Bigras, Pascal and De Kelper, Bruno.
2005.
« A multi-neighborhood and multi-operator strategy for the uncapacitated exam proximity problem ».
In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Hawaii, USA, Oct.10-12, 2005)
pp. 3810-3816.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Blaquière, YvesBlaquière, Yves. 2005. « Le génie microélectronique et l'évolution des technologies - le changement grandeur nature ». Communication lors de la conférence : Congrès de l'Association des professeurs en sciences du Québec (APSQ) (Thetford Mines, QC, Canada, Oct. 2005). Bocher, Philippe
Bocher, Philippe, Jahazi, Mohammad, Germain, Lionel, Wanjara, Priti, Gey, Nathalie and Humbert, Michel.
2005.
« β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ».
Solid State Phenomena, vol. 105.
pp. 127-132.
Khodabandeh, Ali Reza, Jahazi, Mohammad, Yue, Steve and Bocher, Philippe.
2005.
« Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ».
ISIJ International, vol. 45, nº 2.
pp. 272-280.
Germain, Lionel, Gey, Nathalie, Humbert, Ludovic, Bocher, Philippe and Jahazi, Mohammad.
2005.
« Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ».
Acta Materialia, vol. 53, nº 13.
pp. 3535-3543.
Bocher, P., Jahazi, M., Germain, L., Gey, N. and Humbert, M..
2005.
« Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005)
pp. 523-530.
Montréal, Qué., Canada : École de technologie supérieure.
Boutana, N., Bocher, P., Jahazi, M., Savoie, J., Piot, D. and Montheillet, F..
2005.
« Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005)
pp. 273-280.
Montréal, Qué., Canada : École de technologie supérieure.
Germain, L., Gey, N., Humbert, M., Bocher, P. and Jahazi, M..
2005.
« β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ».
In Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005)
Coll. « Materials Science Forum », vol. 495-497.
pp. 663-668.
Trans Tech Publications.
Germain, L., Gey, N., Humbert, M., Hazotte, A., Bocher, P. and Jahazi, M..
2005.
« An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ».
Materials Characterization, vol. 54, nº 3.
pp. 216-222.
Wanjara, P., Monajati, H., Jahazi, M., Germain, L., Bocher, P. and Immarigeon, J.-P..
2005.
« Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ».
In Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005)
pp. 15-26.
Association for Iron and Steel Technology. Boland, Jean-François
Boland, Jean-François, Thibeault, Claude and Zilic, Zeljko.
2005.
« Using Matlab and Simulink in a SystemC Verification Environment ».
In Proceedings of Design and Verification Conference (DVCon05) (San Jose, CA, USA, Feb. 14-16, 2005 )
Boland, Jean-François, Thibeault, Claude and Zilic, Z..
2005.
« Efficient multi-abstraction level functional verification methodology for DSP applications ».
In Global Signal Processing Expo and Conference (GSPx) (Santa Clara, CA, USA, Sept., 2004)
Bonev, Ilian
Bonev, Ilian and Gosselin, C.M..
2005.
« Singularity loci of spherical parallel mechanisms ».
In IEEE International Conference on Robotics and Automation (ICRA) (Barcelona, Spain, April 18-22, 2005)
pp. 2957-2962.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Bonev, Ilian. 2005. « Augmenter votre productivité à l'aide des robots parallèles ». Communication lors de la conférence : Rendez-vous de l'Automatisation (Montréal, QC, Canada, 21-22 sept. 2005). Botez, Ruxandra
Dinu, Alin Dorian, Botez, Ruxandra Mihaela and Cotoi, Iulian.
2005.
« Aerodynamic forces approximations using the Chebyshev method for Closed-Loop aeroservoelasticity studies ».
Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada, vol. 51, nº 4.
pp. 167-175.
Hiliuta, Adrian, Botez, Ruxandra and Brenner, M..
2005.
« Approximation of unsteady aerodynamic forces Q(k, M) by use of fuzzy techniques ».
AIAA Journal, vol. 43, nº 10.
pp. 2093-2099.
Botez, Ruxandra, Biskri, D. E., Terrien, S., Rathe, A., Stathopoulos, N. and Dickinson, M..
2005.
« Method based on the LS approach used for flutter aeroservoelasticity analysis studies ».
In Proceedings of the IASTED International Conference on Modelling, Simulation, and Optimization (Oranjenstad, Aruba, Aug. 29-31, 2005)
pp. 211-216.
Calgary, Canada : ACTA Press.
Hiliuta, Adrian, Botez, Ruxandra and Brenner, Marty.
2005.
« Approximation of unsteady aerodynamic forces Q(k, M) by use of fuzzy techniques ».
In 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (Austin, TX, USA, April 18-21, 2005)
Coll. « AIAA paper »
pp. 3437-3445.
Reston, VA, USA : American Institue of Aeronautics and Astronautics Inc..
Ibrir, Salim and Botez, Ruxandra.
2005.
« Robust stabilization of uncertain aircraft active systems ».
Journal of Vibration and Control, vol. 11, nº 2.
pp. 187-200.
Hiliuta, Adrian, Botez, Ruxandra and Brenner, Marty.
2005.
« Approximation of unsteady aerodynamic forces by use of fuzzy techniques ».
In 24th IASTED International Conference on Modeling, Identification, and Control (MIC) (Innsbruck, Austria, Feb. 16-18, 2005)
pp. 457-464.
Canada : Acta Press.
Biskri, D. E., Botez, Ruxandra, Therrien, S., Rathe, A., Stathopoulos, N. and Dickinson, M..
2005.
« Corrected least squares method for aeroservoelasticity studies ».
In Proceedings : 20th Canadian Conference of Applied Mechanics (CANCAM) (Montreal, QC, Canada, May 30-June 2, 2005)
McGill University, Dept. of Mechanical Engineering, Dept. of Civil Engineering and Applied Mechanics.
Biskri, D. E., Botez, Ruxandra, Therrien, S., Rathe, A., Stathopoulos, N. and Dickinson, M..
2005.
« Mixed method for unsteady aerodynamic forces approximations for aeroservoelasticity studies on fly-by-wire aircraft ».
In Canadian Aeronautical Society Institute (CASI) Conference (Toronto, ON, Canada, Apr. 26-27, 2005)
Botez, Ruxandra.
2005.
« New method for aeroservoelastic interactions studies ».
In The 30th Annual Congress of the American Romanian Academy of Arts and Sciences : the Academy of Economic Studies of Moldova, July 5-10, 2005 : proceedings (Chisinau, Moldavia, July 5-10, 2005)
pp. 497-501.
ASEM.
Botez, Ruxandra, Biskri, D. E., Therrien, S., Rathé, A., Stathopoulos, N. and Dickinson, M..
2005.
« New mixed method for unsteady aerodynamic forces approximations for aeroservoelasticity studies ».
In CEAS/AIAA/DGLR International Forum on Aeroelasticity and Structural Dynamics 2005 : conference proceedings : IFASD 2005, , München, Arabella ASheraton Grand Hotel, June 28-July 1, 2005 (Munich, Germany, June 28-July 1, 2005)
DGLR.
Botez, Ruxandra, Lefebvre, M. and Brenner, M..
2005.
« Reduced frequencies ranges selection for unsteady aerodynamic forces in aeroservoelasticity studies on a Fly-by-Wire aircraft ».
In Canadian Aeronautical Society Institute (CASI) Conference (Toronto, ON, Canada, Apr. 26-27, 2005)
Crisan, E., Botez, Ruxandra, Seto, J., Lambert, E., Hui, K. and Mureithi, N..
2005.
« Application of parameter estimation methods in helicopter identification ».
In 11th Australian International Aerospace Congress (Melbourne, Australia, Mar. 13-17, 2005)
Dinu, Alin Dorian, Botez, Ruxandra Mihaela and Cotoi, Iulian.
2005.
« Approximation of aerodynamic forces from frequency to Laplace domain ».
In 30th Congress of the American Romanian Academy of Arts and Sciences (ARA) (Chisinau, Republic of Moldova, July 05-10, 2005)
ARA.
Dumitrache, Alexandru and Botez, Ruxandra.
2005.
« Active control laws for aeroelasticity ».
Proceedings in applied mathematics and mechanics (PAMM), vol. 5, nº 1.
pp. 651-652.
Hiliuta, A., Botez, Ruxandra and Brenner, M..
2005.
« Approximation of unsteady aerodynamic forces by use of combination of fuzzy clustering and shape preserving techniques ».
In 20th Canadian Conference of Applied Mechanics (CANCAM) (Montreal, QC, Canada, May 30-June 2, 2005)
Hui, K., Crisan, E. G., Botez, R., Seto, J., Lambert, E. and Mureithi, N..
2005.
« Comparison of a mathematical model for bell 427 helicopter using time and frequency domain techniques ».
In Eleventh Australian International Aerospace Congress (Melbourne, Australia, Mar. 13-17, 2005)
Institution of Engineers, Australian and Royal Aeronautical Society.
Nadeau Beaulieu, M., Hiliuta, Adrian, Popov, A.-V., Botez, Ruxandra and Mureithi, N..
2005.
« New formulation of the ground dynamics model generation and validation by use of flight test data ».
In 11th Australian International Aerospace Congress (Melbourne, Australia, Mar. 13-17, 2005)
Nadeau Beaulieu, M., Popov, A.-V., Popescu, R., Hiliuta, Adrian, Botez, Ruxandra and Mureithi, N..
2005.
« Methodology for aerodynamic model generation for the B-427 helicopter in hover and forward flight by use of flight test data ».
In 11th Australian International Aerospace Congress (Melbourne, Australia, Mar. 13-17, 2005)
Bouix, Sylvain
Bouix, Sylvain, Pruessner, Jens C., Collins, D. Louis and Siddiqi, Kaleem.
2005.
« Hippocampal shape analysis using medial surfaces ».
NeuroImage, vol. 25, nº 4.
pp. 1077-1089.
Bouix, Sylvain, Siddiqi, Kaleem and Tannenbaum, Allen.
2005.
« Flux driven automatic centerline extraction ».
Medical Image Analysis, vol. 9, nº 3.
pp. 209-221.
Goldberg-Zimring, Daniel, Meier, Dominik S., Bouix, Sylvain and Warfield, Simon K..
2005.
« Studying anatomy and disease in medical images using shape analysis ».
In
Medical Imaging Systems Technology. Vol. 4 : Methods in Diagnosis Optimization.
pp. 329-362. World Scientific Publishing Co..
Martin-Fernandez, Marcos, Bouix, Sylvain, Ungar, Lida, McCarley, Robert W. and Shenton, Martha E..
2005.
« Two methods for validating brain tissue classifiers ».
In Medical Image Computing and Computer-Assisted Intervention – MICCAI 2005 : 8th International Conference, Proceedings, Part I (Palm Springs, CA, USA, Oct. 26-29, 2005)
Coll. « Lecture Notes in Computer Science », vol. 3749.
pp. 515-522.
Springer.
Pohl, Kilian M., Bouix, Sylvain, Shenton, Martha E., Grimson, Eric L. and Kikinis, Ron.
2005.
« Automatic segmentation using non-rigid registration ».
In 8th International Conference on Medical Image Computing and Computer Assisted Intervention - MICCAI 2005 Short Papers (Palm Springs, CA, USA, Oct. 26-29, 2005)
Wiegand, L. C., Warfield, S. K., Levitt, J. J., Hirayasu, Y., Salisbury, D. F., Heckers, S., Bouix, S., Schwartz, D., Spencer, M., Dickey, C. C., Kikinis, R., Jolesz, F. A., McCarley, R. W. and Shenton, M. E..
2005.
« An in vivo MRI study of prefrontal cortical complexity in first-episode psychosis ».
American Journal of Psychiatry, vol. 162, nº 1.
pp. 65-70. Boulé, Marc
Boulé, Marc and Zilic, Zeljko.
2005.
« Incorporating efficient assertion checkers into hardware emulation ».
In International Conference on Computer Design (San Jose, CA, USA, Oct. 02-05, 2005)
pp. 221-228.
IEEE. Boulé, Marc and Zilic, Zeljko. 2005. « Incorporating efficient assertion checkers into hardware emulation ». Affiche présentée lors de la conférence : TEXPO 2005 (Ottawa, ON, Canada, Oct. 2005). Boulé, Marc and Zilic, Zeljko. 2005. « Incorporating efficient assertion checkers into hardware emulation ». Communication lors de la conférence : Séminaire ReSMiQ 2005 (Montréal, QC, Canada, Sept. 2005). Bourque, Pierre
Laporte, Claude Y., Bourque, Pierre, Belkebir, Youssef and Doucet, Mikel.
2005.
« Amélioration de la définition des rôles du processus de génie logiciel de la société Bombardier Transport ».
Génie logiciel, nº 72.
pp. 43-52.
Abran, Alain, Moore, James W., Bourque, Pierre, Dupuis, Robert and Tripp, Leonard L..
2005.
« An international consensus on the software engineering body of knowledge ».
In ONTOSE 2005 - Proceedings of the 1st International Workshop on Ontology, Conceptualizations and Epistemology for Software and Systems Engineering (Alcala de Henares, Madrid, Spain, June 9-10, 2005)
Coll. « CEUR Workshop Proceedings », vol. 163.
Netherlands : Sun SITE Central Europe CEUR-WS. Bourque, Pierre. 2005. « Contributions to the maturation of software engineering as a discipline and a recognized profession ». These. Belfast, Northern Ireland, UK, University of Ulster Bourque, Pierre. 2005. « Principles should underlie standards and best practices ». Communication lors de la conférence : 29th Annual International Computer Software and Applications Conference (COMPSAC) (Edinburgh, Scotland, UK, July 26-28, 2005). Bourque, Pierre. 2005. « The SWEBOK guide - A curriculum analysis ». Communication lors de la conférence : 18ièmes Journées Internationales "Génie Logiciel & Ingénierie de Systèmes et leurs applications (ICSSEA) (Paris, France, 29 nov.-1 déc. 2005). Bourque, Pierre, Dupuis, R., Abran, Alain, Moore, J. and Tripp, L.. 2005. « Le guide du corpus de connaissances en génie logiciel ». Communication lors de la conférence : Section régionale de l'Outaouais, Ordre des ingénieurs du Québec (Gatineau, QC, Canada). Bouzid, Hakim
Bouzid, Hakim and Nechache, A..
2005.
« Thermally induced deflections in bolted flanged connections ».
Journal of Pressure Vessel Technology, vol. 127, nº 4.
pp. 394-401.
Bouzid, Hakim and Nechache, A..
2005.
« An analytical solution for evaluating gasket stress change in bolted flange connections subjected to high temperature loading ».
Journal of Pressure Vessel Technology, vol. 127, nº 4.
pp. 414-421.
Marchand, Luc, Derenne, Michel, Sakr, Olivier and Bouzid, Hakim.
2005.
« Long term pressurized graphite gasketed joint tests ».
Welding Research Council Bulletin, nº 507.
pp. 1-14.
Champliaud, Henri and Bouzid, Abdel-Hakim.
2005.
« Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005)
pp. 127-138.
Montréal, Qué., Canada : École de technologie supérieure.
Bouzid, Hakim.
2005.
« Bolted flange joints with full face gaskets : an analytical approach based on flexibility ».
In ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005)
pp. 29-35.
New York, NY, USA : American Society of Mechanical Engineers.
Diany, M., Bouzid, Hakim and Derenne, M..
2005.
« On the validity and limits of the gasket effective width concept ».
In ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005)
pp. 15-20.
New York, NY, USA : American Society of Mechanical Engineers.
Nechache, A. and Bouzid, Hakim.
2005.
« Creep effect of attached structures on bolted flanged joint relaxation ».
In ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005)
pp. 207-215.
New York, NY, USA : American Society of Mechanical Engineers. Bouzid, Hakim. 2005. « Bolted flanged joint flexibility analysis ». Communication lors de la conférence : PVRC Conference on Best Practices for Flange Assembly and Maintenance (PVRC-WRC) (New Orleans, LA, USA, May 23-25, 2005).
Bouzid, A. and Morandin, G. D., éds.
2005.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers. Brailovski, Vladimir
Prokoshkin, S., Brailovski, Vladimir, Khmelevskaya, I., Dobatkin, S., Inaekyan, K., Turilina, V., Demers, V. and Tat'yanin, E..
2005.
« Creation of substructure and nanostructure in thermomechanical treatment and control on functional properties of Ti-Ni alloys with shape memory effect ».
Metal Science and Heat Treatment, vol. 47, nº 5-6.
pp. 182-187.
Inaekyan, K. E., Prokoshkin, S. D., Brailovski, V., Khmelevskaya, I. Yu., Demers, V., Dobatkin, S. V., Tatyanin, E. V. and Bastarache, E..
2005.
« Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys ».
In Nanomaterials by Severe Plastic Deformation (Fukuoka, Japan, Sept. 22-26, 2005)
Coll. « Materials Science Forum », vol. 503-504.
pp. 597-602.
Stafa-Zuerich, Switzerland : Trans Tech Publications Ltd.
Baril, Y., Brailovski, Vladimir, Cartier, R. and Terriault, Patrick.
2005.
« Feasibility study of a new sternal closure device using tubular braided superelastic nitinol structure ».
In Materials and Processes for Medical Devices Conference & Exposition (Boston, MA, USA, Nov. 14-16, 2005)
pp. 243-248.
Kinsman Road, OH, USA : ASM International.
Gauthier, François-Simon, Vachon, Pierre-Luc, Brailovski, Vladimir and Terriault, Patrick.
2005.
« Development of a numerical model for the optimization of damage controlling carbon/epoxy composites containing SMA wires ».
In International Workshop on Smart Materials and Structures (Cansmart) (Toronto, ON, Canada, Oct. 12-13, 2006)
pp. 261-270.
Kingston, Canada : CanSmart Group. Brissette, François
Temimi, Marouane, Leconte, Robert, Brissette, François and Chaouch, Naira.
2005.
« Flood monitoring over the Mackenzie River Basin using passive microwave data ».
Remote Sensing of Environment, vol. 98, nº 2-3.
344-355 .
Temimi, M., Leconte, R., Brissette, F. and Chaouch, N..
2005.
« Flood and soil wetness monitoring over the Mackenzie River Basin using AMSR-E 37 GHz brightness temperature ».
In 2005 IEEE International Geoscience and Remote Sensing Symposium (IGARSS '05) (Seoul, South Korea, July 29, 2005)
pp. 59-62.
IEEE. Bédard, Claude
Rivard, Hugues, Mora, Rodrigo and Bédard, Claude.
2005.
« From architectural sketch to feasible structural system solution ».
In ASCE International Conference on Computing in Civil Engineering (Cancun, Mexico, Jul. 12-15, 2005)
pp. 191-202.
Reston, VA, USA : American Society of Civil Engineers.
Rivard, Hugues, Meniru, Kene and Bédard, Claude.
2005.
« Early building design : capturing decisions for better interoperability ».
In 22nd Conference on Information Technology in Construction (Dresden, Germany, July 19-21, 2005)
pp. 385-391.
Germany : Institute for Construction Informatics. Cardinal, Patrick
Cardinal, Patrick, Boulianne, Gilles and Comeau, Michel.
2005.
« Segmentation of recordings based on partial transcriptions ».
In Proceedings of the 9th European Conference on Speech Communication and Technology (Interspeech'2005-Eurospeech) (Lisbon, Portugal, Sept. 4-8, 2005)
pp. 3345-3348.
International Speech and Communication Association. Carter, Alan
Carter, Alan and Perraton, Daniel.
2005.
« In-situ permeability of the outermost layer of asphalt and cement concrete road materials water permeability evaluated with gas flow ».
Road Materials and Pavement Design, vol. 6, nº 2.
pp. 239-253.
Carter, Alan, Stroup-Gardiner, M., Das, Thomas and Bowman, Brian.
2005.
« Initial ride quality of hot-mix asphalt pavements ».
Transportation Research Record, vol. 1907.
pp. 104-112.
Carter, Alan, Stroup-Gardiner, M. and Lange, C.R..
2005.
« Quantification of emission potential from asphalt binders using mass loss and opacity measurements ».
International Journal of Pavement Engineering, vol. 6, nº 3.
pp. 191-200.
Carter, Alan and Stroup-Gardiner, Mary.
2005.
« Use of digital imaging to evaluate HMA surface texture and aggregate coverage of surface treatments ».
In Proceedings of the Fiftieth Annual Conference of the Canadian Technical Asphalt Association Conference (CTAA), Victoria, British Columbia, November, 2005 (Victoria, BC, Canada, Nov. 6-9, 2005)
Coll. « Proceedings of the ... annual Conference of Canadian Technical Asphalt Association », vol. 50.
pp. 279-293.
Laval, QC, Canada : Polyscience publication.
Carter, Alan and Stroup-Gardiner, M..
2005.
« An evaluation of coarse aggregate tests at the NCAT test track ».
In 33rd Annual Conference of the Canadian Society for Civil Engineering 2005 “Gateway To Excellence” (Toronto, ON, Canada, June 2-4, 2005)
pp. 3528-3537.
Canadian Society for Civil Engineering. Chaallal, Omar
Nollet, Marie-José, Chaallal, Omar and Lefebvre, Karine.
2005.
« Seismic vulnerability study of historical buildings in Old Montreal : overview and perspectives ».
In Structural studies, repairs, and maintenance of heritage architecture IX (Malta, June 22-24, 2005)
Coll. « WIT transactions on the built environment », vol. 83.
Southampton, UK : WIT PRESS.
Bousselham, Abdelhak and Chaallal, Omar.
2005.
« Contribution à l’étude du renforcement en cisaillement des poutres en béton armé à l’aide de matériaux composites avancés ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 32, nº 2.
pp. 339-351. Champagne, Roger
Coallier, François and Champagne, Roger.
2005.
« A product line engineering practices model ».
Science of Computer Programming, vol. 57, nº 1.
pp. 73-87.
Ben Amor, Lotfi, Dessaint, Louis-A., Belhadj, Chokri A. and Champagne, Roger.
2005.
« Sensorless torque estimation and control of a switched reluctance motor ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Champagne, Roger, Boutouili, Farid and Dessaint, Louis-A..
2005.
« Optimizing the output equations of the state-space representation of electrical systems ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Champagne, Roger and Dessaint, Louis-A..
2005.
« Modeling and simulation of electrical systems with transformers and coupled inductors using the state-variable approach ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Masmoudi, A., Paquette, G. and Champagne, Roger.
2005.
« Agrégation de composants dirigée par les métadonnées (ACODIM) ».
In 4th Workshop on Objects, Components and Models in Information Systems Engineering (INFORSID OCM-SI) (Grenoble, France, 24-27 mai 2005)
pp. 125-135.
Champliaud, Henri
Champliaud, Henri and Bouzid, Abdel-Hakim.
2005.
« Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005)
pp. 127-138.
Montréal, Qué., Canada : École de technologie supérieure.
Champliaud, Henri, Lajmi, Abdelmajid and Lê, Ngan Van.
2005.
« Finite element analysis of a three-point belt tension tester ».
In Non-Conference Specific Technical Papers (Troy, MI, USA, Sept. 1, 2005)
Coll. « SAE Technical Papers », vol. 2005-01-3137.
SAE.
Champliaud, Henri, Lajmi, Abdelmajid and Lê, Ngan Van.
2005.
« Finite element analysis of a three-point belt tension tester ».
SAE Transactions : Journal of Engines, vol. 114, nº 3.
pp. 1533-1538.
Potvin, Marie-Josée, Sylvestre, Bruno and Champliaud, Henri.
2005.
« Development of a small deployable membrane antenna ».
In Canadian Aeronautics and Space Institute Conference (Toronto, ON, Canada, Apr. 26-27, 2005)
Terrier, P., Seers, P. and Champliaud, H..
2005.
« Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ».
In Powertrain & Fluid Systems Conference and Exhibition (San Antonio, TX, USA, Oct. 24-27, 2005)
Coll. « SAE Technical Papers », vol. 2005-01-3829.
SAE International.
Thomas, Marc and Champliaud, Henri.
2005.
« Effect of residual stresses on modal parameters of welded structures ».
In 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005)
Calgary, Canada : CMVA. Chandra, Ambrish
Ghatak Choudhuri, Sumit, Singh, B., Chandra, Ambrish and Al Haddad, Kamal.
2005.
« A comparative study of power quality improvements in six-pulse AC-DC converter fed vector controlled induction motor drive ».
IEEMA Journal, vol. 25, nº 5.
pp. 54-57.
Singh, B., Verma, V., Chandra, Ambrish and Al Haddad, Kamal.
2005.
« Hybrid filters for power quality improvement ».
IEE Proceedings - Generation, Transmission and Distribution, vol. 152, nº 3.
pp. 365-378.
Singh, B.N., Rastgoufard, P., Singh, B., Chandra, Ambrish and Al Haddad, Kamal.
2005.
« Design and digital implementation of active filter with power balance theory ».
IEE Proceedings - Electric Power Applications, vol. 152, nº 5.
pp. 1149-1160.
Chatterjee, K., Chandra, Ambrish and Al Haddad, Kamal.
2005.
« PLL-less one-cycle controlled modified load compensator for wide range of loads ».
In IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 12-16, 2005)
pp. 2322-2326.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Khadkikar, V., Chandra, Ambrish, Barry, A.O. and Nguyen, T.D..
2005.
« Steady state power flow analysis of unified power quality conditioner (UPQC) ».
In International Conference on Industrial Electronics and Control Applications (ICIECA) (Quito, Équator, Nov. 29-Dec. 2, 2005)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kincic, Slaven, Wan, Xiaotong T., McGillis, Donald T., Chandra, Ambrish, Ooi, Boon-Teck, Galiana, Francisco D. and Joos, Geza.
2005.
« Voltage support by distributed static VAr systems (SVS) ».
IEEE Transactions on Power Delivery, vol. 20, nº 2.
pp. 1541-1549. Chatterjee, K., Chandra, Ambrish and Al Haddad, Kamal. 2005. « PLL-less one-cycle controlled modified load compensator for wide range of loads ». Communication lors de la conférence : IEEE 36th Power Electronics Specialists Conference (PESC) (Recife, Brazil, June 12-16, 2005). Chatelain, Jean-François
Chatelain, Jean-François.
2005.
« A level-based optimization algorithm for complex part localization ».
Precision Engineering, vol. 29, nº 2.
197–207. Cheriet, Mohamed
Ayat, N.E., Cheriet, Mohamed and Suen, C.Y..
2005.
« Automatic model selection for the optimization of SVM kernels ».
Pattern Recognition, vol. 38, nº 10.
pp. 1733-1746.
Mazghani, Neila, Mitiche, Amar and Cheriet, Mohamed.
2005.
« A new representation of shape and its use for high performance in on-line Arabic character recognition by an associative memory ».
International Journal on Document Analysis and Recognition, vol. 7, nº 4.
pp. 201-210.
Milgram, J., Sabourin, Robert and Cheriet, Mohamed.
2005.
« Système de classification à deux niveaux de décision combinant approche par modélisation et machines à vecteurs de support ».
Traitement du Signal, vol. 22, nº 3.
pp. 293-304.
Abid, Sabeur, Faniech, Farhat, Jervis, B.W. and Cheriet, Mohamed.
2005.
« Fast training of mutilayer perceptrons with a mixed norm algorithm ».
In IEEE International Joint Conference on Neural Networks (IJCNN) (Montreal, Canada, Jul. 31-Aug. 4, 2005)
pp. 1018-1022.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Adankon, Mathias M., Cheriet, Mohamed and Ayat, N.E..
2005.
« Optimizing resources in model selection for support vector machines ».
In IEEE International Joint Conference on Neural Networks (IJCNN) (Montreal, Canada, Jul. 31-Aug. 4, 2005)
pp. 925-930.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Li, Yun, Cheriet, Mohamed and Suen, C.Y..
2005.
« A threshlod selection method based on multiscale and graylevel co-occurrence matrix analysis ».
In 8th International Conference on Document Analysis and Recognition (ICDAR) (Seoul, South Korea, Aug. 29-Sept. 1, 2005)
pp. 575-579.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Mezghani, N., Mitiche, A. and Cheriet, Mohamed.
2005.
« Représentation des formes par des histogrammes de caractéristiques et son application à la reconnaissance en-ligne de caractères Arabes isolés ».
In 3e Conférence Internationale : Sciences Électroniques, Technologies de l'Information et des Télécommunications (SETIT) (Tunis, Tunisie, 27-31 mars 2005)
Milgram, J., Cheriet, Mohamed and Sabourin, Robert.
2005.
« Estimating accurate multi-class probabilities with support vector machines ».
In IEEE International Joint Conference on Neural Networks (IJCNN) (Montreal, Canada, Jul. 31-Aug. 4, 2005)
pp. 1906-1911.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Cheriet, Mohamed, Demers, Jean-Christophe and Deblois, Sylvain.
2005.
« Shock filter-based diffusion fields—application to grayscale character image processing ».
International Journal of Image and Graphics, vol. 5, nº 2.
Milgram, Jonathan, Sabourin, Robert and Cheriet, Mohamed.
2005.
« Combining model-based and discriminative approaches in a modular two-stage classification system : application to isolated handwritten digit recognition ».
Electronic Letters on Computer Vision and Image Analysis, vol. 5, nº 2.
pp. 1-15.
Ben Braiek, Ezzedine, Cheriet, Mohamed and Doré, Vincent.
2005.
« SKCS-A separable kernel family with compact support to improve visual segmentation of handwritten data ».
Electronic Letters on Computer Vision and Image Analysis, vol. 5, nº 1.
pp. 14-29.
Sehad, L., Mezai, Lamia and Cheriet, Mohamed.
2005.
« Méthode de détection de l'inclinaison des documents arabes imprimés basée sur la réduction des points et la transformée de hough ».
In 3e Conférence Internationale Sciences Electronique, Technologies de l'Information et des Télécommunications (SETIT) (Sousse, Tunisia, 27-31 mars 2005)
Seddik, H., Sayadi, M., Faniech, F. and Cheriet, Mohamed. 2005. « A new spatial watermarking method based on a logarithmic transformation of an encrypted embedded Mark ». Communication lors de la conférence : 17th IMACS World Congress on Scientific Computation, Applied Mathematics and Simulations (Paris, France, July 11-15, 2005). Adankon, M., Cheriet, Mohamed and Ayat, N.E.. 2005. « Optimizing resources in model selection for support vector machines ». Communication lors de la conférence : IEEE International Joint Conference on Neural Networks (IJCNN) (Montreal, QC, Canada, July 31-Aug. 4, 2005).
Adankon, Mathias, Cheriet, Mohamed and Ayat, Nedjem Eddine.
2005.
« Optimisation de ressources dans la sélection de modèle des machines à vecteurs de support ».
In Comptes rendues des 12-èmes rencontres de la Société Francophone de la Classification (Montréal, QC, Canada, 30 mai-1 juin 2005)
pp. 35-38.
Université du Québec à Montréal.
Mezai, L., Sehad, A., Sekkai, L. and Cheriet, M..
2005.
« Estimation de l'inclinaison des documents arabes imprimés par la transformée de Hough ».
In 4e conférence sur le Génie Electrique (Bordj-El-Bahri Alger, Algérie, 12-13 avr. 2005)
Mezai, L., Sehad, A., Sekkai, L. and Cheriet, M..
2005.
« Fast method for skew detection of printed Arabic documents using linear regression ».
In International Computer Systems & Information Technology Conference ICSIT'05 (Alger, Algérie, July 19-21, 2005)
Radziszewski, P., Picard, B., Bourret, A.-M., Brunet, J.-P., Tétreault, M., Zaras, K., Cheriet, M. and Ouellet, J..
2005.
« Particleboard surface-roughness classification system modeling, simulation, and bench testing ».
Journal of Manufacturing Science and Engineering, vol. 127, nº 3.
pp. 677-686. Cloutier, Sylvain G.Caplette, Stephane, Cloutier, Sylvain, Massicotte, Charles and Villeneuve, Alain (inventeurs) 3 May 2005. « Method for measuring polarization dependent loss and insertion loss ». ITF Technologies Optiques Inc., ITF Optical Technologies Inc. (titulaire(s)). Brevet américain US 6,888,624. Coallier, François
Coallier, François and Champagne, Roger.
2005.
« A product line engineering practices model ».
Science of Computer Programming, vol. 57, nº 1.
pp. 73-87.
Coallier, François and Gérin-Lajoie, R..
2005.
« Architecture gouvernementale ouverte : évolution des normes, des standards de consortium et de logiciels libres ».
Montréal, Canada : CIRANO. 30 p. Coallier, François and Gérin-Lajoie, R.. 2005. « Architecture gouvernementale ouverte : évolution des normes, des standards de consortium et de logiciel libres ». Communication lors de la conférence : Conférence sur les Logiciels Libres et les Administrations Publiques (CLLAP) (Québec, QC, Canada, 16-17 mai 2005). Coallier, François. 2005. « Open government architecture : evolution of standards and open software ». Communication lors de la conférence : IEEE 13th International Workshop on Software Technology and Engineering Practice (STEP) (Budapest, Hungary, Sept. 24-25, 2005). Coallier, François. 2005. « International standardization in software and systems engineering ». Communication lors de la conférence : It Service Management Forum (ItSMF) (Dayton, OH, USA, May 11, 2005). Coallier, François. 2005. « Global view in standardisation needs and topics in software and systems engineering areas ». Communication lors de la conférence : FiSMA Seminar on Standardisation of Software and Systems Engineering (Helsinki, Finland, May 20, 2005). Coallier, François. 2005. « Security in an enterprise IT context ». Communication lors de la conférence : IEEE 13th International Workshop on Software Technology and Engineering Practice (STEP) (Budapest, Hungary, Sept. 24-25, 2005). Coallier, François. 2005. « IT and software engineering standardization ». Communication lors de la conférence : Consortium for Software Engineering Research Fall Meeting (CSER) (Toronto, ON, Canada, Oct. 16, 2005). Constantin, NicolasConstantin, Nicolas (inventeur) 1 November 2005. « Power amplifier including a desensitized bias circuit ». Skyworks Solutions, Inc. (titulaire(s)). Brevet américain US 6,961,554. Dao, Thien-My
Zhao, Jian-Hua, Dao, Thien-My and Liu, Zhaoheng.
2005.
« Optimization of mechanical systems reliability using ant colony based simulation approach ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Cancun, Mexico, May 18-20, 2005)
pp. 182-187.
Calgary, Canada : ACTA Press.
Zhao, Jian Hua, Liu, Zhaoheng and Dao, My-Thien.
2005.
« Solving reliability optimal design problem using ant colony system (ACS) approaches ».
In Proceedings of the 15th International CIRP Design Seminar (Shanghai, China, May 22-25, 2005)
pp. 32-40.
David, Éric
David, Éric, Dabbagui, Abderrezzak, Dubreuil, Isabelle and Masounave, Jacques.
2005.
« Electrical measurements used as nondestructive evaluation technique for the characterization of micro-size particle reinforced polymeric matrix composites ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montréal, Canada, Aug. 1-4, 2005)
pp. 87-95.
Montréal, Qué., Canada : École de technologie supérieure.
Crine, J.P. and David, Éric.
2005.
« Influence of mechanical stresses on some electrical properties of polymers ».
In Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005)
pp. 71-74.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
David, Éric and Lamarre, L..
2005.
« Modeling of the low-frequency dielectric response of rotating machine stator insulation system ».
In Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005)
pp. 257-260.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Noirhomme, B., David, Éric, Gharbi, H. and Lessard, M.C..
2005.
« Application of dielectric response techniques for the condition assessment of power transformers ».
In Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005)
pp. 273-276.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Paynot, C., Lamarre, L., David, Éric and Taghizad, R..
2005.
« The use of transient current for the evaluation of the condition of rotor and stator insulation systems of large synchronous rotating machines ».
In Electrical Insulation Conference and Electrical Manufacturing Expo (EIC) (Indianapolis, USA, Oct. 23-26, 2005)
pp. 78-81.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
David, Éric and Lamarre, Laurent.
2005.
« Influence of rise time on dielectric parameters extracted from time domain spectroscopy in the context of generator stator insulation ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 12, nº 3.
pp. 423-428. Noirhomme, B., David, Éric, Gharbi, H. and Lessard, M.C.. 2005. « Application of dielectric response techniques for the condition assessement of power transformers ». Communication lors de la conférence : Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005). David, Éric and Lamarre, L.. 2005. « Modelisation of the low-frequency dielectric response of rotating machine stator insulation system ». Communication lors de la conférence : Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005). David, Éric, Dabbagui, A., Dubreuil, I. and Masounave, Jacques. 2005. « Time and frequency domain dielectric measurements used as nondestructive evaluation technique for the characterization of micro-size particle reinforced polymeric matrix composites ». Communication lors de la conférence : 7th International Conference on Mesomechanics (MESO) (Montreal, QC, Canada, Aug. 1-4, 2005). Crine, J.P. and David, Éric. 2005. « Mechanical stresses and some electrical properties of polymers ». Communication lors de la conférence : Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005 ).
El Majdoubi, M., Vu-Khanh, Toan and David, Éric.
2005.
« Effects of physical aging on fracture and yielding behavior of polypropylene ».
In 1st International Conference on Mechanics of Biomaterials & Tissue (Waikoloa, HI, USA, Dec. 11-15, 2005)
Guerra, M., Thomas, Marc and David, Éric.
2005.
« Turbomachinery blade vibratory stress prediction using contact elements modeling ».
In Symposium on the Evaluation, Control, and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land, Sea and Air Vehicles (Seville, Spain, Oct. 3-7, 2005)
De Kelper, Bruno
Wong, Tony, Bigras, Pascal and De Kelper, Bruno.
2005.
« A multi-neighborhood and multi-operator strategy for the uncapacitated exam proximity problem ».
In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Hawaii, USA, Oct.10-12, 2005)
pp. 3810-3816.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
De Kelper, Bruno, Fortin Blanchette, Handy and Dessaint, Louis-A..
2005.
« Switching time model updating for the real-time Simulation of power-electronic circuits and motor drives ».
IEEE Transactions on Energy Conversion, vol. 20, nº 1.
pp. 181-186. Demarquette, Nicole R.
Calvão, Patrícia S., Yee, Marcio and Demarquette, Nicole R..
2005.
« Effect of composition on the linear viscoelastic behavior and morphology of PMMA/PS and PMMA/PP blends ».
Polymer, vol. 46, nº 8.
pp. 2610-2620.
Carastan, Danilo J., Palmezan, Elaine, Shimizu, Renato N. and Demarquette, Nicole R..
2005.
« Interfacial tension between polystyrene and a liquid crystal polymer ».
Liquid Crystals, vol. 32, nº 3.
pp. 349-357.
Carvalho, R. A. M., Lima, R. R., Nascimento Filho, A. P., Silva, M. L. P. and Demarquette, N. R..
2005.
« Plasma polymerized TEOS films for nanochannels formation and sensor development ».
Sensors and Actuators B: Chemical, vol. 108, nº 1–2.
pp. 955-963.
Carvalho, Rodrigo A. M., Carvalho, Alexsander T., Silva, Maria Lúcia P. da, Demarquette, Nicole R. and Assis, Odílio B. G..
2005.
« Use of thin films obtained by plasma polymerization for grain protection and germination enhancement ».
Química Nova, vol. 28.
pp. 1006-1009.
Gomes, Lincoln Silva and Demarquette, Nicole Raymonde.
2005.
« Influence of temperature on surface tension of liquid crystals in the cyanobiphenyl and cyano-oxybiphenyl series ».
Molecular Crystals and Liquid Crystals, vol. 437, nº 1.
181/[1425]-1194/[1438].
Hernandez, Leonardo Fois, Nascimento Filho, Antonio Pereira do, da Silvia, Maria Lucia Pereira and Demarquette, Nicole R..
2005.
« Avaliação da capacidade de adsorção em substratos flexíveis ».
Boletim Técnico da Faculdade de Technologia de Sao Paulo, nº 18.
pp. 77-82.
Lima, R. R., Carvalho, R. A. M., Filho, A. P. Nascimento, Silva, M. L. P. and Demarquette, N. R..
2005.
« Production and deposition of adsorbent films by plasma polymerization on low cost micromachined non-planar microchannels for preconcentration of organic compound in air ».
Sensors and Actuators B: Chemical, vol. 108, nº 1–2.
pp. 435-444.
Macaúbas, Paulo H. P., Demarquette, Nicole R. and Dealy, John M..
2005.
« Nonlinear viscoelasticity of PP/PS/SEBS blends ».
Rheologica Acta, vol. 44, nº 3.
pp. 295-312.
Palmer, Guillermo and Demarquette, Nicole R..
2005.
« Evaluation of imbedded fiber retraction phenomenological models for determining interfacial tension between molten polymers ».
Polymer, vol. 46, nº 19.
pp. 8169-8177.
Tan, Ing Hwie, Ueda, Mario, Dallaqua, Renato, Rossi, José Osvaldo, Beloto, Antonio Fernando, Demarquette, Nicole Raymonde and Gengembre, Leon.
2005.
« Aluminum implantation in Kapton® for space applications: magnetic field effects on implantation in vacuum arcs ».
Japanese Journal of Applied Physics, vol. 44, nº 1, part 7A.
pp. 5211-5215. Demers, Vincent
Prokoshkin, S., Brailovski, Vladimir, Khmelevskaya, I., Dobatkin, S., Inaekyan, K., Turilina, V., Demers, V. and Tat'yanin, E..
2005.
« Creation of substructure and nanostructure in thermomechanical treatment and control on functional properties of Ti-Ni alloys with shape memory effect ».
Metal Science and Heat Treatment, vol. 47, nº 5-6.
pp. 182-187.
Inaekyan, K. E., Prokoshkin, S. D., Brailovski, V., Khmelevskaya, I. Yu., Demers, V., Dobatkin, S. V., Tatyanin, E. V. and Bastarache, E..
2005.
« Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys ».
In Nanomaterials by Severe Plastic Deformation (Fukuoka, Japan, Sept. 22-26, 2005)
Coll. « Materials Science Forum », vol. 503-504.
pp. 597-602.
Stafa-Zuerich, Switzerland : Trans Tech Publications Ltd. Desharnais, Jean-Marc
Abran, Alain, Al-Qutaish, Rafa E. and Desharnais, Jean-Marc.
2005.
« Harmonization issues in the updating of ISO standards on software product quality ».
Metrics News , vol. 10, nº 2.
pp. 35-44.
Abran, Alain, Desharnais, Jean-Marc and Azziz, F..
2005.
« Measurement convertibility : from function points to COSMIC-FFP ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montreal, Canada, Sept.12-14, 2005)
pp. 227-240.
Aachen, Germany : Shaker Verlag.
April, Alain and Desharnais, Jean-Marc.
2005.
« Software maintenance expert system (SMxpert) - measuring the use of the knowledge base ».
In Innovations in software measurement : proceedings of the 15th International Workshop on Software Measurement, September 12-14, 2005, Montréal, Canada (Montreal, Canada, Sept. 12-14, 2006)
pp. 95-103.
Aachen, Germany : Shaker Verlag.
April, Alain and Desharnais, Jean-Marc.
2005.
« Software maintenance expert system (SMxpert) : a decision support intrument ».
In Proceedings of the seventh International Conference on Enterprise Information Systems (ICEIS) (Miami, FL, USA, May 24-28, 2005)
pp. 142-148.
Institute for Systems and Technologies of Information, Control and Communication.
Abran, Alain, Al Qutaish, Rafa E., Desharnais, Jean-Marc and Habra, Naji.
2005.
« An information model for software quality measurement with ISO standards ».
In International Conference on Software Development (SWDC-REK) (Reykjavik, Iceland, May 27-June 1, 2005)
pp. 104-116.
Laporte, Claude Y., Desharnais, Jean-Marc, Abouelfattah, Mohamed Mounir, Bamba, Jean-Claude, Renault, Alain and Habra, Naji.
2005.
« Initiating software process improvement in small enterprises : experiments with micro-evaluation framework ».
In International Conference on Software Development (Reykjavik, Iceland, May 27-June 1, 2005)
pp. 153-163.
Deslandes, Dominic
Bozzi, Maurizio, Deslandes, Dominic, Arcioni, Paolo, Perregrini, Luca, Wu, Ke and Conciauro, Giuseppe.
2005.
« Efficient analysis and experimental verification of substrate-integrated slab waveguides for wideband microwave applications ».
International Journal of RF and Microwave Computer-Aided Engineering, vol. 15, nº 3.
pp. 296-306.
Deslandes, D. and Wu, K..
2005.
« The substrate integrated waveguide (SIW) - concept, technology and applications ».
In International symposium on microwave and optical technology (ISMOT) (Fukuoka, Japan, Aug. 22-25, 2005)
pp. 586-601.
ISMOT 2005 Organizing Committee.
Deslandes, Dominic and Wu, Ke.
2005.
« Analysis and design of current probe transition from grounded coplanar to substrate integrated rectangular waveguides ».
IEEE Transactions on Microwave Theory and Techniques, vol. 53, nº 8.
pp. 2487-2494.
Deslandes, Dominic and Wu, Ke.
2005.
« Substrate integrated waveguide leaky-wave antenna: Concept and design considerations ».
In Asia-Pacific microwave conference (APMC) (Suzhou, China, Dec. 4-7, 2005)
IEEE.
Wu, Ke, Deslandes, Dominic and Cassivi, Yves.
2005.
« Impedance transformers and matching networks ».
In
Encyclopedia of RF and Microwave Engineering.
pp. 2079-2092. Hoboken, N.J. : John Wiley & Sons, Inc.. Dessaint, Louis-A.
Nerguizian, Vahé, Rafaf, Mustapha, Dessaint, Louis-A., Packirisamy, Muthukumaran and Stiharu, Ion.
2005.
« MEMS magnetic linear motor for micro applications ».
WSEAS Transactions on Circuits and Systems, vol. 4, nº 4.
pp. 267-273.
Okou, A. F., Akhrif, Ouassima and Dessaint, Louis-A..
2005.
« Decentralized multivariable voltage and speed regulator for large-scale power systems with guarantee of stability and transient performance ».
International Journal of Control , vol. 78, nº 17.
pp. 1343-1358.
Okou, A.F., Dessaint, Louis-A. and Akhrif, Ouassima.
2005.
« Power systems stability enhancement using a wide-area signals based hierarchical controller ».
IEEE Transactions on Power Systems , vol. 20, nº 3.
pp. 1465-1477.
Yacoubi, L., Al Haddad, Kamal, Dessaint, Louis-A. and Fnaiech, F..
2005.
« A DSP-based implementation of a nonlinear model reference adaptive control for a three-phase three-level NPC boost rectifier prototype ».
IEEE Transactions on Power Electronics, vol. 20, nº 5.
pp. 1084-1092.
Ben Amor, Lotfi, Dessaint, Louis-A., Belhadj, Chokri A. and Champagne, Roger.
2005.
« Sensorless torque estimation and control of a switched reluctance motor ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Champagne, Roger, Boutouili, Farid and Dessaint, Louis-A..
2005.
« Optimizing the output equations of the state-space representation of electrical systems ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Champagne, Roger and Dessaint, Louis-A..
2005.
« Modeling and simulation of electrical systems with transformers and coupled inductors using the state-variable approach ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Okou, A.F., Dessaint, Louis-A. and Akhrif, Ouassima.
2005.
« Smith prediction approach for the design of a robust wide-area measurements based hierarchical controller ».
In IEEE Power Engineering Society General Meeting (PES) (Montreal, Canada, June 12-16, 2005)
pp. 1448-1454.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Okou, A.F., Dessaint, Louis-A. and Akhrif, Ouassima.
2005.
« Globally stabilizing robust adaptive voltage and speed regulator for large-scale power systems ».
In 44th IEEE Conference on Decision and Control and European Control Conference (CDC-ECC) (Seville, Spain, Dec.12-15, 2005)
pp. 6472-6479.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Semaille, Christophe, Dessaint, Louis-A., Blanchette, Handy and Brunelle, Patrice.
2005.
« Average-value power converter models for simulation of AC drives ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
ELECTRIMACS.
Thibault, Robert, Al Haddad, Kamal and Dessaint, Louis-A..
2005.
« A new control algorithm for 3-phase PWM voltage source converters connected to the grid ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Saskatoon, Canada, May 1-4, 2005)
pp. 1274-1277.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Tu, X., Dessaint, Louis-A., El Kahel, M. and Barry, A..
2005.
« Modeling and experimental validation of internal fault in salient pole synchronous machines including space harmonics ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Yacoubi, Loubna, Al-Haddad, Kamal, Fnaiech, Farhat and Dessaint, Louis-A..
2005.
« A DSP-based implementation of a new nonlinear control for a three-phase neutral point clamped boost rectifier prototype ».
IEEE Transactions on Industrial Electronics, vol. 52, nº 1.
pp. 197-205.
De Kelper, Bruno, Fortin Blanchette, Handy and Dessaint, Louis-A..
2005.
« Switching time model updating for the real-time Simulation of power-electronic circuits and motor drives ».
IEEE Transactions on Energy Conversion, vol. 20, nº 1.
pp. 181-186.
Okou, Francis A., Dessaint, Louis-A. and Akhrif, Ouassima.
2005.
« A robust adaptive voltage and speed regulator for multimachine power systems ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 30, nº 1.
pp. 29-38.
Nerguizian, Vahé, Rafaf, Mustapha, Dessaint, Louis-A., Saad, Maarouf, Packirisamy, Muthukumaran and Stiharu, Ion.
2005.
« MEMS controlled linear motor ».
In 9th International Conference on the Commercialization of Micro and Nano Systems (COMS) (Baden-Baden, Germany, Aug. 21-25, 2005)
Nerguizian, Vahé, Rafaf, Mustapha, Dessaint, Louis-A., Packirisamy, Muthukumaran and Stiharu, Ion.
2005.
« Design and characterization of a novel MEMS linear motor ».
In Proceedings of the 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO) (Rio de Janeiro, Brazil, Apr. 25-27, 2005)
pp. 182-187.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society. Dias de Assuncao, Marcos
Dias de Assuncao, Marcos, Nadiminti, Krishna, Venugopal, Srikumar, Ma, Tianchi and Buyya, Rajkumar.
2005.
« An integration of Global and Enterprise Grid computing: Gridbus Broker and Xgrid perspective ».
In Grid and Cooperative Computing - GCC 2005 : 4th International Conference, Beijing, China, November 30 - December 3, 2005. Proceedings (Beijing, China, Nov. 30 - Dec. 03, 2005)
Coll. « Lecture Notes in Computer Science », vol. 3795.
pp. 406-417.
Springer Verlag. Doré, Sylvie
Ayari, H., Thomas, Marc and Doré, Sylvie.
2005.
« Développement d'un modèle statistique de prédiction de la durée de vie du rachis lombaire, dépendant de la contrainte appliquée, de l'âge et de la densité osseuse ».
Perspectives Interdisciplinaires sur le Travail et la Santé , vol. 7, nº 2.
p. 14. Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie and de Guise, Jacques A.. 2005. « Gesture standardization increases the reproducibility of 3D kinematic measurements of the knee joint ». Communication lors de la conférence : 60th Canadian Orthopaedic Association Annual Meeting (Montreal, QC, Canada, June 3-5, 2005). Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie and de Guise, Jacques A.. 2005. « Gesture and posture as important factors in 3D kinematic assessment of the knee ». Communication lors de la conférence : 31st Meeting of the Canadian Orthopaedic Residents Association (Montreal, QC, Canada, June 2-5, 2005). Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie and de Guise, Jacques A.. 2005. « Gesture and posture as important factors in 3D kinematic assessment of the knee ». Communication lors de la conférence : Research Day of the Programme d'Orthopédie Édouard-Samson (Montreal, QC, Canada, May 6, 2005). Ayari, H., Thomas, Marc and Doré, Sylvie. 2005. « Évaluation par un modèle d'éléments finis paramétrique des contraintes dynamiques dans le rachis lombaire, dues aux vibrations du corps entier ». Communication lors de la conférence : Séminaire Santé et Sécurité au Travail (SST) (Montréal, QC, Canada, Nov. 2005). Langevin, L., Doré, Sylvie and Oliva, D.. 2005. « Les professeurs de la relève : une étude de l'impact de quelques formations ». Communication lors de la conférence : 77e Congrès de l'ACFAS (Chicoutimi, QC, Canada, 10 mai 2005). Doutres, Olivier
Doutres, Olivier and Dauchez, Nicolas.
2005.
« Characterisation of porous materials viscoelastic properties involving the vibro-acoustical behaviour of coated panels ».
In SAPEM 2005 : Symposium on the Acoustics of Poro-Elastic Materials : December 7 - 8 - 9, 2005, ENTPE, Lyon, France (Lyon, France, Dec. 7-9, 2005)
France : École Nationale des Travaux Publics de l'État.
Doutres, Olivier and Dauchez, Nicolas.
2005.
« Modelling of the acoustic radiation of a structure covered by a porous layer ».
In Noise and Vibration : Emerging Methods (NOVEM) (St-Raphael, France, Apr., 2005)
Doutres, Olivier, Dauchez, Nicolas and Génevaux, Jean-Michel.
2005.
« Caractérisation des matériaux poreux par l'étude du rayonnement d'une plaque traitée acoustiquement ».
In 17ème Congrès Français de Mécanique (Troyes, France, Sept. 2005)
Dubé, Jean-Sébastien
Dubé, Jean-Sébastien and Galvez-Cloutier, Rosa.
2005.
« Applications of data on the mobility of heavy metals in contaminated soil to the definition of site-specific remediation criteria ».
Journal of Environmental Engineering and Science, vol. 4, nº 5.
pp. 399-411. Dubé, Martine
Dubé, Martine, Hubert, Pascal, Yousefpour, Ali and Denault, J..
2005.
« Mechanical performance of resistance-welded thermoplastic composites skin/stringer specimens ».
In SAMPE Fall technical conference : [proceedings] (Seattle, WA, USA, Oct. 31-Nov. 3, 2005)
Society for the Advancement of Material and Process Engineering. Dufresne, Louis
Dufresne, Louis, Christophe, Julien, Gourgue, Olivier and Winckelmans, Gregoire.
2005.
« Merging of unequal strength co-rotating vortices ».
In 58th Annual Meeting of the Division of Fluid Dynamics (Chicago, IL, USA, Nov. 20-22, 2005)
American Physical Society.
Winckelmans, Gregoire, Dufresne, Louis and Bricteux, Laurent.
2005.
« LES investigation of aircraft wake two-vortex system in low level atmospheric turbulence ».
In 58th Annual Meeting of the Division of Fluid Dynamics (Chicago, IL, USA, Nov. 20-22, 2005)
American Physical Society. Dumouchel, Pierre
Kenny, Patrick, Boulianne, Gilles, Quellet, Pierre and Dumouchel, Pierre.
2005.
« Factor analysis simplified ».
In IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP) (Philadelphia, PA, USA, Mar. 18-23, 2005)
pp. 637-640.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Dumouchel, Pierre. 2005. « Real-time closed captioning ». Communication lors de la conférence : Canadian Hard of Hearing Association Conference (Kelowna, BC, Canada, June 2-5, 2005). Dumouchel, Pierre. 2005. « CRIM's work on speech recognition and captioning ». Communication lors de la conférence : Commonwealth Hansard Editors Association Conference (AB, Canada, Aug. 8, 2005). Dumouchel, Pierre. 2005. « Exploiting audio-visual metadata ». Communication lors de la conférence : Canadian Metadata Forum (Ottawa, ON, Canada, Sept. 27-28, 2005). Dumouchel, Pierre. 2005. « E-inclusion, a new canadian initiative ». Communication lors de la conférence : E-Challenges (Ljubljana, Slovénia, Oct. 19-21, 2005).
Kenny, Patrick, Boulianne, Gilles and Dumouchel, Pierre.
2005.
« Eigenvoice modeling with sparse training data ».
IEEE Transactions on Speech and Audio Processing, vol. 13, nº 3.
pp. 345-354.
Mihoubi, M., O'Shaughnessy, D. and Dumouchel, P..
2005.
« Relevant information extraction for discriminative training applied to speaker identification ».
In Interspeech 2006 - 9th European Conference on Speech Communication and Technology (Lisbon, Portugal, Sept. 04-08, 2005)
pp. 3097-3100.
International Speech Communication Association. Dziong, Zbigniew
Dziong, Zbigniew, Khedimi, Hadda and Nagarajan, Ramesh.
2005.
« Link cost optimization for protection routing in meshed networks ».
In 19th International Teletraffic Congress (ITC19) (Beijing, China, Aug. 29-Sept. 2, 2005)
pp. 365-374.
Beijing University of Posts and Telecommunications Press.
Rong, Bo, Amoussou, Grace, Dziong, Zbigniew, Elhakeem, A.K. and Kadoch, Michel.
2005.
« Mobility prediction aided dynamic multicast routing in MANET ».
In IEEE Sarnoff Symposium on Advances in Wired and Wireless communication (Princeton, USA, April 18-19, 2005)
pp. 21-24.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Dziong, Zbigniew, Khedimi, H. and Nagarajan, R..
2005.
« Link cost optimization for protection routing in optical meshed networks ».
In 4th International Conference on Optical Communication and Networks (ICOCN) (Bangkok, Thaïland, Dec. 14-16, 2005)
pp. 269-272.
Bangkok University. Dziong, Zbigniew. 2005. « Wireless networks ». Communication lors de la conférence : SYTACom (The Centre for Advanced Systems and Communications) Workshop (Montreal, QC, Canada, Feb., 2005).
Amoussou, Grace, Mohanna, Hachem, Dziong, Zbigniew and Kadoch, Michel.
2005.
« An OpNet implementation of Gauss-Markov mobility model and integration of link prediction algorithm in DSR protocol: A cross-layer approach ».
In OPNETWORK 2005 (Washington D.C., WA, USA, Aug. 22-26, 2005)
Dziong, Zbigniew and Nagarajan, Ramesh.
2005.
« Markov decision based link cost optimization for path and link protection in meshed networks ».
In International Network Optimization Conference (INOC) (Lisbon, Portugal, Mar. 20-23, 2005)
pp. 273-279.
El boussaidi, Ghizlane
Mili, H., El Boussaidi, Ghizlane and Salah, A..
2005.
« Mise en œuvre des patrons de conception par représentation explicite du problème ».
L'objet : logiciel, bases de données, réseaux, vol. 11, nº 1-2.
pp. 113-126. El boussaidi, Ghizlane. 2005. « Transformation de modèles par application de patrons de conception ». Dissertation. Montréal, QC, Canada, Université du Québec à Montréal, 334 p.
Mili, Hafedh and El Boussaidi, Ghizlane.
2005.
« Representing and applying design patterns: What is the problem? ».
In 8th International Conference on Model Driven Engineering Languages and Systems, MoDELS 2005, October 2, 2005 - October 7, 2005 (Montego Bay, Jamaica, Oct 2-7, 2005)
Coll. « Lecture Notes in Computer Science », vol. 3713.
pp. 186-200.
Springer Verlag. Fimbel, Éric
Lemay, Mathieu, Fimbel, Éric, Beuter, A., Chouinard, S. and Richer, F..
2005.
« Sensorimotor mapping affects movement correction deficits in early huntington's disease ».
Experimental Brain Research, vol. 165, nº 4.
pp. 454-460.
Fimbel, Éric, Domingo, Pedro Perez, Lamoureux, Daniel and Beuter, Anne.
2005.
« Automatic detection of movement disorders using recordings of rapid alternating movements ».
Journal of Neuroscience Methods, vol. 146, nº 2.
183–190. Forgues, Daniel
Forgues, D., Gendreau, O. and Lefebvre, E..
2005.
« L'ingénierie des exigences en construction: Un processus axé sur la valeur ».
In 33rd Annual Conference of the Canadian Society for Civil Engineering (Toronto, ON, Canada, June 02-04, 2005)
Coll. « Proceedings, Annual Conference - Canadian Society for Civil Engineering »
pp. 1-10.
Canadian Society for Civil Engineering. Fortin Blanchette, Handy
Blanchette, Handy and Al Haddad, Kamal.
2005.
« A new discrete packaging configuration of bidirectional power switch with less magnetic interference ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Saskatoon, Canada, May 1-4, 2005)
pp. 1278-1282.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. François, Véronique
François, Véronique and Aboutorabi, Seyed Sadreddin.
2005.
« Mechanical cleavage of complex microstructured fibers ».
In Photonic Applications in Devices and Communication Systems (Toronto, Canada, Sept. 12-14, 2005)
Coll. « Proceedings of SPIE », vol. 5970.
Bellingham, WA, USA : SPIE - The International Society for Optical Engineering. Lemay, M., Savoie, M. and François, Véronique. 2005. « Wavelength tracking tools for user empowered reconfigurable optical networks ». Communication lors de la conférence : 2nd Workshop on Optimization of Optical Networks (Montreal, QC, Canada, Apr. 14-15, 2005). François, Véronique. 2005. « Recent progress in reconfigurable elements : an optimization perspective ». Communication lors de la conférence : Second Workshop on Optimization of Optical Networks (Montreal, QC, Canada, Apr. 14-15, 2005). Fuhrman, ChristopherAbdel Moez, W., Shaik, I., Gunnalan, R., Shereshevsky, M., Goseva-Popstojanova, K., Ammar, H. H., Mili, A. and Fuhrman, C.. 2005. « Architectural level maintainability based risk assessment ». Affiche présentée lors de la conférence : 21st IEEE International Conference on Software Maintenance (ICSM 2005) (Budapest , Hungary, Sept. 26, 2005).
Shaik, I., Abdelmoez, W., Gunnalan, R., Shereshevsky, M., Zeid, A., Ammar, H. H., Mili, A. and Fuhrman, C..
2005.
« Change propagation for assessing design quality of software architectures ».
In 5th Working IEEE/IFIP Conference on Software Architecture, 2005. WICSA 2005 (Pittsburgh, PA, USA, Nov. 6-10, 2005)
pp. 205-208.
IEEE. Gabrea, Gheorghe Marcel
Gabrea, Marcel.
2005.
« Robust adaptive kalman filter for speech signal recovery in colored noise ».
In International Workshop on Acoustic Echo and Noise Control (IWAENC) (Eindhoven, The Netherlands, Sept. 12-15, 2005)
Gabrea, Marcel.
2005.
« An adaptive kalman filter for the enhancement of speech signals in colored noise ».
In IEEE Workshop on Applications of Signal Processing to Audio and Acoustics (WASPAA) (New Paltz, NY, USA, Oct. 16-19, 2005)
pp. 45-48.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Gagnon, François
Ghislain, G., Choquette, F., Belzile, Jean and Gagnon, François.
2005.
« A simple and fast carrier recovery algorithm for high-order QAM ».
IEEE Communications Letters, vol. 9, nº 10.
pp. 918-920.
Haccoun, D., Cardinal, C. and Gagnon, François.
2005.
« Search and determination of convolutional self-doubly orthogonal codes for iterative threshold decoding ».
IEEE Transactions on Communications, vol. 53, nº 5.
pp. 802-809.
Ammari, M., Gagnon, François and Belzile, Jean.
2005.
« Adaptive M-QAM scheme and unbiased MMSE-DFE receiver ».
In IEEE 62nd Vehicular Technology Conference (VTC) (Dallas, USA, Sept. 25-28, 2005)
pp. 1935-1939.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ammari, M., Gagnon, François and Belzile, Jean.
2005.
« On adaptative modulation when the received signal is corrected with imperfect channel estimates ».
In IEEE International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob) (Montreal, Canada, Aug. 22-24, 2005)
pp. 166-170.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ammari, Mohamed L., Gagnon, François and Belzile, Jean.
2005.
« Effect of channel estimation and prediction errors on adaptive M-PSK systems ».
In IEEE Joint International Conference on Autonomic and Autonomous Systems and International Conference on Networking and Services (ICAS-ICNS) (Papeete, Tahiti, French Polynesia, Oct. 23-28, 2005)
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Dumais, P., Cormier, S, Gagnon, François and Thibeault, Claude.
2005.
« On the implementation of a multi-equalizer ».
In IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Gatineau, Que., Canada, June 19-22, 2005)
pp. 287-290.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rezki, Z., Haccoun, D. and Gagnon, François.
2005.
« A threshold-based adaptive encoding for achieving the diversity-multiplexing tradeoff ».
In IEEE International Symposium on Wireless Communication Systems (Siena, Italy, Sept. 5-7, 2005)
pp. 8-12.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Gargour, Christian
Sandhu, A. S., Ramachandran, V. and Gargour, Christian.
2005.
« Generation of 1-D and 2-D analog and digital lowpass filters with monotonic amplitude-frequency response ».
In 48th Midwest Symposium on Circuits and Systems, 2005 (Cincinnati, OH, USA, Aug. 7-10, 2005)
pp. 563-566.
Piscataway, NJ, USA : IEEE.
Ramachandran, V., Ramachandran, R. P. and Gargour, Christian.
2005.
« Some properties of generalized 2-d mirror image and anti mirror image polynomials ».
In IEEE International Symposium on Circuits and Systems 2005, ISCAS 2005 (Kobe, Japan, May 23-26, 2005)
pp. 2321-2324.
Piscataway, NJ, USA : IEEE. Gauthier, Guy
Gauthier, Guy and Boulet, B..
2005.
« Convergence analysis of terminal ILC in the Z domain ».
In American Control Conference (ACC) (Portland, USA, June 8-10, 2005)
pp. 184-189.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Gauthier, Guy, Ajersch, M., Boulet, B., Haurani, A., Girard, P. and DiRaddo, R.. 2005. « A new absorption based model for sheet reheat in thermoforming ». Communication lors de la conférence : SPE Annual Technical Conference (ANTEC) (Boston, MA, USA, May 1-5, 2005).
Gauthier, Guy, Ajersch, Mark, Boulet, Benoît, Haurani, Ammar, Girard, Patrick and Diraddo, Robert.
2005.
« A new absorption based model for sheet reheat in thermoforming ».
In Annual Technical Conference - ANTEC, Conference Proceedings (Boston, MA, USA, May 01-05, 2005)
pp. 353-357.
Society of Plastics Engineers. Germain, PatrickAlbero, Jose, Dussault, Richard, Thompson, Robert G., Germain, Patrick, Sahm, Michael K. and Tremaine, Eric (inventeurs) 22 March 2005. « Main propulsion engine system integrated with secondary power unit ». United Technologies Corporation (titulaire(s)). Brevet américain US 6,868,664 B2. Gharbi, Ali
Dehayem Nodem, F. I., Kenné, Jean-Pierre and Gharbi, Ali.
2005.
« Capacity expansion production and maintenance planning in stochastic manufacturing systems ».
In International Conference on Numerical Analysis and Applied Mathematics (ICNAAM) (Rhodes, Greece, Sept. 16-20, 2005)
pp. 423-427.
Weinheim, Germany : Wiley-VCH Verlag.
Gharbi, Ali and Kenné, Jean Pierre.
2005.
« Maintenance scheduling and production control of multiple-machine manufacturing systems ».
Computers and Industrial Engineering, vol. 48, nº 4.
pp. 693-707.
Boulet, J.-F., Gharbi, Ali and Kenné, Jean-Pierre.
2005.
« Production and corrective maintenance rate policy improvement in an unreliable failure prone manufacturing systems ».
In 35th International Conference on Computer and Industrial Engineering (Istanbul, Turkey, June 19-22, 2005)
pp. 321-326.
Gharbi, Ali, Kenné, Jean-Pierre and Boulet, J.-F..
2005.
« Amélioration des taux de production et de maintenance corrective d'un système de production ».
In 6ième Congrès International de Génie Industriel (Besançon, France, 7-10 juin 2005)
Gharbi, Ali, Pellerin, Robert and Sard, J..
2005.
« Production rate control policy for stochastic remanufacturing systems ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Marrakech, Morocco, May 16-19, 2005)
Gherbi, Abdelouahed
Debbabi, Mourad, Gherbi, Abdelouahed, Ketari, Lamia, Talhi, Chamseddine, Yahyaoui, Hamdi, Zhioua, Sami and Tawbi, Nadia.
2005.
« E-Bunny: A Dynamic Compiler for Embedded Java Virtual Machines ».
The Journal of Object Technology, vol. 4, nº 1.
pp. 83-106. Granger, Éric
Henniges, Philippe, Granger, Éric and Sabourin, Robert.
2005.
« Factors of overtraining with fuzzy ARTMAP neural networks ».
In IEEE International Joint Conference on Neural Networks (IJCNN) (Montreal, Canada, Jul. 31-Aug. 4, 2005)
pp. 1075-1080.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Guilbault, Raynald
Guilbault, Raynald, Gosselin, Claude and Cloutier, Louis .
2005.
« Express model for load sharing and stress analysis in helical gear ».
Journal of Mechanical Design, vol. 127, nº 6.
pp. 1161-1172. Guilbault, Raynald and Cloutier, L.. 2005. « Numerical investigation of the influence of rim and web thickness on vibration modes of thin-rimmed cylindrical gears ». Communication lors de la conférence : International Conference on Gears (Munich, Germany, Sept. 14-16, 2005). Guilbault, Raynald. 2005. « Modes vibratoires des roues d'engrenage cylindriques : un outil de conception adapté ». Communication lors de la conférence : Conférence de l'Association Canadienne en Vibration des Machines (ACVM) (Montréal, QC, Canada, Oct. 2005).
Guilbault, Raynald and Cloutier, L..
2005.
« Numerical investigation of the influence of rim and web thickness on vibration modes of thin-rimmed cylindrical gears ».
In International Conference on Gears (Munich, Germany, Sept. 14-16, 2005)
pp. 651-669.
Germany : VDI Verlag GMBH. Hagemeister, Nicola
Hagemeister, Nicola, Parent, Gerald, Van de Putte, Maxime, St-Onge, Nancy, Duval, Nicolas and de Guise, Jacques A..
2005.
« Reproducible method for studying three-dimensional knee kinematics ».
Journal of Biomechanics, vol. 38, nº 9.
pp. 1926-1931.
Nau, Thomas, Chevalier, Yan, Hagemeister, Nicola, de Guise, Jacques A. and Duval, Nicolas.
2005.
« Comparison of 2 surgical techniques of posterolateral corner reconstruction of the knee ».
The American Journal of Sports Medicine, vol. 33, nº 12.
pp. 1838-1845.
Nau, Thomas, Chevalier, Yan, Hagemeister, Nicola, Duval, Nicolas and de Guise, Jacques A..
2005.
« 3-D kinematic in vitro comparison of posterolateral corner reconstruction techniques in a combined injury model ».
Knee Surgery, Sports Traumatology, Arthroscopy, vol. 13, nº 7.
pp. 572-580. Levasseur, A., Tétreault, P., de Guise, Jacques A., Nuño, Natalia and Hagemeister, Nicola. 2005. « Estimation du centre de rotation de l'articulation glénohumérale ». Affiche présentée lors de la conférence : 8e Congrès des Étudiants du CRCHUM (Montréal, Canada, 20 déc. 2005). Levasseur, A., Hagemeister, Nicola, Tétreault, P., Nuño, Natalia and de Guise, Jacques A.. 2005. « Évaluation de la cinématique tridimensionnelle (3D) de l'articulation scapulo-humérale dans le but de concevoir et d'évaluer une nouvelle prothèse humérale : résultats préliminaires ». Affiche présentée lors de la conférence : Association Canadienne Orthopédique (ACO) (Montréal, QC, Canada, 3-5 juin 2005).
Li, Yue, Aissaoui, Rachid, Boivin, Karine, Turcot, Katia, Duval, Nicolas, Roy, André, Pontbriand, Robert, Hagemeister, Nicola and de Guise, Jacques A..
2005.
« Development of a tool for analyzing 3D knee kinematic characteristics of different daily activities ».
In IEEE 27th Annual International Conference of the Engineering in Medicine and Biology Society (EMBS) (Shanghai, China, Aug. 31-Sept. 3, 2005)
pp. 7451-7454.
Piscataway, N.J. : Institute of Electrical and Electronics Engineers Inc.. Turcot, K., Boivin, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Approche biomécanique 3D pour l'évaluation de patients gonarthrosiques : faisabilité et résultats préliminaires ». Affiche présentée lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005). Requiao, L. F., Fuentes, A., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Différence des déplacements linéaires 3D du genou entre les hommes et les femmes lors de la marche sur le tapis roulant ». Communication lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005). Mecheri, H., Aissaoui, Rachid, Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Comparison of two finite helical algorithms on the determination of the finite screw axis of the human knee joint ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Li, Y., Aissaoui, Rachid, Boivin, K., Turcot, K., Duval, N., Roy, A., Pontbriand, R., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Development of a tool for analyzing 3D knee kinematic characteristics of different daily activities ». Communication lors de la conférence : IEEE 27th Annual International Conference of the Engineering in Medicine and Biology Society (EMBS) (Shanghai, China, Aug. 31-Sept. 3, 2005). Levasseur, A., Hagemeister, Nicola, Tétreault, P., Nuño, Natalia and de Guise, Jacques A.. 2005. « Three-dimensional (3D) evaluation of the glenohumeral joint kinematics : preliminary results ». Communication lors de la conférence : Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, May 6, 2005). Fuentes Dupré, A., Requiao, L., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Validation d'un nouvel exosquelette pour l'évaluation tridimensionnelle de la biomécanique du genou ». Communication lors de la conférence : Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005). Aissaoui, Rachid, Li, Y., Boivin, K., Turcot, K., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Utilisation de l'exosquelette pour l'analyse cinématique tridimensionnelle du genou chez la personne valide et atteinte de gonarthrose: perspective clinique ». Communication lors de la conférence : 3e Journée Annuelle de Recherche en Orthopédie (Lausanne, Suisse, 1 juil. 2005). Boivin, K., Turcot, K., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Feasibility and reliability of a new biomechanical approach for the functional assessment of the knee osteoarthritis: preliminary results in a asymptomatic elderly population ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Charbonneau, M., Husse, S., Parent, G., Fuentes Dupré, A., Aissaoui, Rachid, Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Toward the use of 3D motion capture in clinical setting, from the lab to clinics ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Charbonneau, M., Husse, S., Parent, G., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Enregistrement du mouvement 3D du genou en site clinique ». Communication lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005). Fuentes Dupré, A., Requiao, L., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Reproducibility of 3D knee kinematics measured by a new three-dimensional knee analyzer ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Levasseur, A., Hagemeister, Nicola, Tétreault, P., Nuño, Natalia and de Guise, Jacques A.. 2005. « Effect of freezing and thawing in shoulder kinematics analysis ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Li, Y., Aissaoui, Rachid, Boivin, K., Turcot, K., Duval, N., Roy, A., Pontbriand, R., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Is static knee alignment angle related to dynamic knee adduction/abduction angles during bilateral squatting? ». Communication lors de la conférence : 8e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montreal, QC, Canada, Dec. 20, 2005). Requiao, L., Fuentes Dupré, A., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Gender differences in three-dimensional knee joint translation during gait ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005).
Turcot, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A..
2005.
« Measurement of knee joint impact during gait with three-dimensional linear accelerations: reproducibility on a medial knee osteoarthritis population ».
[Conference paper summary]. Osteoarthritis and Cartilage, vol. 13, nº Suppl. A.
S77. Turcot, K., Boivin, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « 3D biomechanical measurement of shock loading during treadmill walking: reliability on an elderly population ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Hallé, Stéphane
Hallé, Stéphane, Bernier, Michel A. and Lartigue, Bérangère.
2005.
« Contribution to the study of multicellular flows inside two-dimensional rectangular and pinched insulated glazing cavities ».
HVAC&R Research, vol. 11, nº 1.
pp. 77-94. Hallé, Stéphane, Bernier, M. A. and Lartigue, B.. 2005. « Contribution to the study of multicellular flows inside two-dimensional rectangular and pinched insulated glazing cavities ». Communication lors de la conférence : ASHRAE Winter Meeting and AHR Expo (Orlando, FL, USA, Feb. 08, 2005).
Bernier, Michel and Hallé, Stéphane.
2005.
« A critical look at the air infiltration term in the canadian energy rating procedure for windows ».
Energy and Buildings, vol. 37, nº 10.
pp. 997-1006.
Amezzane, I., Sawan, M., Bellemare, F. and Hallé, Stéphane.
2005.
« A CFD qualitative study of an infant's plethysmograph ».
In The 28th Conference of the Canadian Medical and Biological Engineering Society, CMBEC 28 (Montreal, QC, Canada, Sept. 9-11, 2005)
Ottawa, ON, Canada : The Canadian Medical and Biological Engineering Society. Harker, Matthew
Harker, Matthew and O'Leary, Paul.
2005.
« Computation of homographies ».
In British Machine Vision Conference (Oxford, UK, Sept. 05-08, 2005)
British Machine Vision Association, BMVA.
Harker, Matthew, O'Leary, Paul and Zsombor-Murray, Paul.
2005.
« Incremental matrix orthogonalization with an application to curve fitting ».
In Computational Imaging III (San Jose, CA, USA, Jan. 16-20, 2005)
Coll. « Proceedings of SPIE », vol. 5674.
pp. 354-361.
SPIE.
O'Leary, P., Harker, M. and Zsombor-Murray, P..
2005.
« Direct and least square fitting of coupled geometric objects for metric vision ».
IEE Proceedings - Vision, Image and Signal Processing, vol. 152, nº 6.
pp. 687-694. Hausler, Robert
Beauchesne, Isabel, Meunier, Nathalie, Drogui, Patrick, Hausler, Robert, Mercier, Guy and Blais, Jean-François.
2005.
« Electrolytic recovery of lead in used lime leachate from municipal waste incinerator ».
Journal of Hazardous Materials, vol. 120, nº 1-3.
pp. 201-211.
Bonenfant, Danielle, Mimeault, Murielle and Hausler, Robert.
2005.
« Comparative analysis of the carbon dioxide absorption and recuperation capacities in aqueous 2-(2-aminoethylamino)ethanol (AEE) and blends of aqueous AEE and N-methyldiethanolamine solutions ».
Industrial and Engineering Chemistry Research, vol. 44, nº 10.
pp. 3720-3725.
Ortega, Lina M., Lebrun, Rémi, Noël, Isabelle M. and Hausler, Robert.
2005.
« Application of nanofiltration in the recovery of chromium (III) from tannery effluents ».
Separation and Purification Technology, vol. 44, nº 1.
pp. 45-52. Hof, Lucas
Wuthrich, R., Fujisaki, K., Couthy, P., Hof, L. A. and Bleuler, H..
2005.
« Spark assisted chemical engraving (SACE) in microfactory ».
Journal of Micromechanics and Microengineering, vol. 15, nº 10.
pp. 276-280.
Wuthrich, R., Hof, L. A., Lal, A., Fujisaki, K., Bleuler, H., Mandin, P. and Picard, G..
2005.
« Physical principles and miniaturization of Spark Assisted Chemical Engraving (SACE) ».
Journal of Micromechanics and Microengineering, vol. 15, nº 10.
pp. 268-275. Iordanova, Ivanka
Iordanova, Ivanka and Tidafi, Temy.
2005.
« Using historical know-how to model design references: A digital method for enhancing architectural design teaching ».
In Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures (CAAD Futures) (Vienna, Austria, June 20-22, 2005)
pp. 197-206.
Kluwer Academic Publishers. Jahazi, Mohammad
Bocher, Philippe, Jahazi, Mohammad, Germain, Lionel, Wanjara, Priti, Gey, Nathalie and Humbert, Michel.
2005.
« β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ».
Solid State Phenomena, vol. 105.
pp. 127-132.
Khodabandeh, Ali Reza, Jahazi, Mohammad, Yue, Steve and Bocher, Philippe.
2005.
« Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ».
ISIJ International, vol. 45, nº 2.
pp. 272-280.
Germain, Lionel, Gey, Nathalie, Humbert, Ludovic, Bocher, Philippe and Jahazi, Mohammad.
2005.
« Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ».
Acta Materialia, vol. 53, nº 13.
pp. 3535-3543.
Al-Kazzaz, H., Medraj, M., Cao, X., Jahazi, M. and Min, X..
2005.
« Effect of welding speed on Nd:YAG laser weldability of ZE41A-T5 magnesium sand castings ».
In Light metals 2005 : proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada (Calgary, AB, Canada, Aug. 21-24, 2005)
pp. 137-149.
Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.
Bocher, P., Jahazi, M., Germain, L., Gey, N. and Humbert, M..
2005.
« Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005)
pp. 523-530.
Montréal, Qué., Canada : École de technologie supérieure.
Boutana, N., Bocher, P., Jahazi, M., Savoie, J., Piot, D. and Montheillet, F..
2005.
« Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005)
pp. 273-280.
Montréal, Qué., Canada : École de technologie supérieure.
Cao, X. and Jahazi, M..
2005.
« Estimation of resistance of filter media used for Prefil Footprinter tests of liquid aluminium alloys ».
Materials Science and Technology, vol. 21, nº 10.
pp. 1192-1198.
Cao, X. and Jahazi, M..
2005.
« Examination and verification of the filtration mechanism of cake mode during the pressure filtration tests of liquid Al–Si cast alloys ».
Materials Science and Engineering: A, vol. 408, nº 1–2.
pp. 234-242.
Cao, X., Xiao, M., Jahazi, M. and Immarigeon, J. P..
2005.
« Continuous wave ND:YAG laser welding of sand-cast ZE41A-T5 magnesium alloys ».
Materials and Manufacturing Processes, vol. 20, nº 6.
pp. 987-1004.
Cao, X., Xiao, M., Jahazi, M. and Lin, Y. L..
2005.
« Nd:YAG laser welding of magnesium alloy castings ».
In Magnesium Technology 2005: Proceedings of the Symposium Held During the 2005 TMS Annual Meeting in San Francisco, California, U.S.A., February 13-17, 2005 (San Francisco, CA, USA, Feb. 13-17, 2005)
pp. 441-443.
The Minerals, Metals & Materials Society.
Germain, L., Gey, N., Humbert, M., Bocher, P. and Jahazi, M..
2005.
« β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ».
In Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005)
Coll. « Materials Science Forum », vol. 495-497.
pp. 663-668.
Trans Tech Publications.
Germain, L., Gey, N., Humbert, M., Hazotte, A., Bocher, P. and Jahazi, M..
2005.
« An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ».
Materials Characterization, vol. 54, nº 3.
pp. 216-222.
Jalilian, F., Drew, R. A. L. and Jahazi, M..
2005.
« Joining of Inconel 617 sheets in TLP bonding using Ni - P and Ni - Si - B alloys ».
In Trends in Welding Research - Proceedings of the 7th International Conference (Pine Mountain, GA, USA, May 16-20, 2005)
pp. 873-878.
Pine Mountain, GA, United states : ASM International.
Monajati, H., Taheri, A. K., Jahazi, M. and Yue, S..
2005.
« Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 36, nº 4.
pp. 895-905.
Monajati, H., Zarandi, F., Jahazi, M. and Yue, S..
2005.
« Strain induced γ′ precipitation in nickel base superalloy Udimet 720 using a stress relaxation based technique ».
Scripta Materialia, vol. 52, nº 8.
pp. 771-776.
Wanjara, P., Booth-Morrison, C., Hsu, E. and Jahazi, M..
2005.
« Process optimization for linear friction welding of Ti-6Al-4V ».
In Trends in welding research : proceedings of the 7th International Conference (Atlanta, GA, USA, May 16-20, 2005)
Coll. « ASM Proceedings of the International Conference: Trends in Welding Research »
pp. 855-860.
ASM International.
Wanjara, P., Brochu, M., Girard, S. and Jahazi, M..
2005.
« Electron beam freeforming on type 321 stainless steel using BNi-2 brazing paste ».
Materials Science and Technology, vol. 21, nº 5.
pp. 613-618.
Wanjara, P., Brochu, M. and Jahazi, M..
2005.
« Ti–6Al–4V electron beam weld qualification using laser scanning confocal microscopy ».
Materials Characterization, vol. 54, nº 3.
pp. 254-262.
Wanjara, P. and Jahazi, M..
2005.
« Linear friction welding of Ti-6Al-4V: Processing, microstructure, and mechanical-property inter-relationships ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 36, nº 8.
pp. 2149-2164.
Wanjara, P., Jahazi, M., Monajati, H., Yue, S. and Immarigeon, J. P..
2005.
« Hot working behavior of near-α alloy IMI834 ».
Materials Science and Engineering: A, vol. 396, nº 1–2.
pp. 50-60.
Wanjara, P., Monajati, H., Jahazi, M., Germain, L., Bocher, P. and Immarigeon, J.-P..
2005.
« Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ».
In Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005)
pp. 15-26.
Association for Iron and Steel Technology. Joncas, Simon
Van Rijswijk, K., Joncas, Simon, Bersee, H. E. N., Bergsma, O. K. and Beukers, A.
2005.
« A sustainable vaccum-infused thermoplastic composites for MW-Size wind turbine blades - preliminary design and manufacturing issues ».
Journal of Solar Energy Engineering, vol. 127, nº 4.
pp. 570-580. Joncas, Simon and Van Rijswijk, K.. 2005. « Large thermoplastic wind turbine blades : design and manufacturing issues ». Communication lors de la conférence : Delft University Wind Energy Research Institute Meeting (DUWIND) (Delft, Netherlands, Apr. 2005). Joncas, Simon. 2005. « MW-size thermoplastic composite wind turbine blades - Part 2 : manufacturing Issues ». Communication lors de la conférence : 1st Seminar on Wind Energy in Europe (Athens, Greece, Sept. 21-23, 2005).
Joncas, Simon, Bergsma, Otto and Beukers, Adriaan.
2005.
« Power regulation and optimization of offshore wind turbines through trailing edge flap control ».
In 43rd AIAA Aerospace Sciences Meeting and Exhibit (Reno, NV, USA, Jan. 10-13, 2005)
Coll. « AIAA paper »
pp. 77-87.
USA : American Institute of Aeronautics and Astronautics.
Van Rijswijk, K., Joncas, Simon, Bersee, H. A. N. and Bergsma, O. K..
2005.
« Vacuum infused fibre-reinforced thermoplastic MW-size turbine blades : a cost effective innovation? ».
In 43rd AIAA Aerospace Sciences Meeting and Exhibit (Reno, NV, USA, Jan. 10-13, 2005)
Coll. « AIAA paper »
pp. 39-51.
USA : American Institute of Aeronautics and Astronautics.
Joncas, Simon, Lemay, J., Bergsma, O. K., Bersee, H. E. N. and Beukers, A..
2005.
« Topography optimization for maximum buckling loads of wind turbine blade sandwich panels ».
In Fifteenth International Conference on Composite Materials (ICCM-15 ): CDROM Extended Abstracts and Papers (Durban, South Africa, June 27-July 1, 2005)
South Africa : Centre for Composite and Smart Materials and Structures, University of KwaZulu-Natal.
Van Rijswijk, K., Joncas, Simon, Bersee, H. E. N., Beukers, A. and Picken, S. J..
2005.
« Controlling the reaction rate of anionic polyamide-6 for vacuum infusion of composite wind turbine blades ».
In Fifteenth International Conference on Composite Materials (ICCM-15 ): CDROM Extended Abstracts and Papers (Durban, South Africa, June 27-July 1, 2005)
South Africa : Centre for Composite and Smart Materials and Structures, University of KwaZulu-Natal. Kadoch, Michel
Wan, Zuo Wen, Kadoch, Michel and Elhakeem, Ahmed.
2005.
« Performance evaluation of dynamic tree-based reliable multicast ».
IEICE Transactions on Communications, vol. E88-B, nº 5.
pp. 2035-2045.
Rong, Bo, Bennani, Maria, Elhakeem, A.K. and Kadoch, Michel.
2005.
« Traffic engineering extension for traditional QoS multicast routing algorithms ».
In IEEE International Conference on Communications (ICC) (Seoul, South Korea, May 16-20, 2005)
pp. 208-212.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rong, Bo, Lebeau, J., Bennani, Maria, Elhakeem, A.K. and Kadoch, Michel.
2005.
« Modeling and simulation of traffic aggregation based SIP over MPLS network architecture ».
In 38th Annual Simulation Symposium (ANSS) (San Diego, CA, USA, April 4-6, 2005)
pp. 305-311.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Rong, Bo, Tremblay, B., Bennani, Maria and Kadoch, Michel.
2005.
« Integrating traffic aggregation mechanism into SIP based IP telephony over MPLS network ».
In IEEE Global Telecommunications Conference (GLOBECOM) (St-Louis, MO, USA, Nov. 28-Dec. 2, 2005)
pp. 797-801.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Mnif, Kais, Rong, Bo and Kadoch, Michel.
2005.
« Virtual backbone based on MCDS for topology control in wireless ad hoc networks ».
In 2nd ACM International Workshop on Performance Evaluation of Wireless Ad Hoc, sensor, and ubiquitous networks (PE-WASUN) (Montreal, Canada, Oct. 10-13, 2005)
pp. 230-233.
New York, NY, USA : Association for Computing Machinery.
Mnif, K., Rong, Bo and Kadoch, Michel.
2005.
« A distributed approach for computing the minimum connected dominating set in ad hoc networks ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Saskatoon, Canada, May 1-4, 2005)
pp. 2065-2068.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rong, Bo, Amoussou, Grace, Dziong, Zbigniew, Elhakeem, A.K. and Kadoch, Michel.
2005.
« Mobility prediction aided dynamic multicast routing in MANET ».
In IEEE Sarnoff Symposium on Advances in Wired and Wireless communication (Princeton, USA, April 18-19, 2005)
pp. 21-24.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rong, Bo, Elhakeem, A.K. and Kadoch, Michel.
2005.
« Achieve load balancing and avoid bandwidth fragmentation in MANET QoS routing ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Saskatoon, Canada, May 1-4, 2005)
pp. 2061-2064.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rong, Bo, Mnif, K., Elhakeem, A.K. and Kadoch, Michel.
2005.
« A hybrid error control scheme for MANET reliable multicast ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Saskatoon, Canada, May 1-4, 2005)
pp. 1086-1089.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rong, Bo, Lebeau, Jacques, Bennani, Maria, Kadoch, Michel and Elhakeem, Ahmed K..
2005.
« Traffic aggregation based SIP over MPLS network architecture ».
In 19th International Conference on Advanced Information Networking and Applications (Taipei, Taiwan, Mar. 28-30, 2005)
pp. 827-832.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Rong, Bo, Bennani, Maria, Kadoch, Michel and Elhakeem, Ahmed K..
2005.
« Bandwidth fragmentation avoided QoS multicast routing by employing admission control ».
In 19th International Conference on Advanced Information Networking and Applications (AINA) (Taipei, Taiwan, Mar. 28-30, 2005)
pp. 273-278.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Bennani, Maria, Azzouz, Rochdi and Kadoch, Michel.
2005.
« Performance analysis of multimedia traffic over Wireless 802.11e EDCF mode ».
In OPNETWORK 2005 (Washington D.C., WA, USA, Aug. 22-26, 2005)
Amoussou, Grace, Mohanna, Hachem, Dziong, Zbigniew and Kadoch, Michel.
2005.
« An OpNet implementation of Gauss-Markov mobility model and integration of link prediction algorithm in DSR protocol: A cross-layer approach ».
In OPNETWORK 2005 (Washington D.C., WA, USA, Aug. 22-26, 2005)
Kajl, Stanislaw
Nassif, Nabil, Kajl, Stanislaw and Sabourin, Robert.
2005.
« Optimization of HVAC control system strategy using two-objective genetic algorithm ».
HVAC&R Research, vol. 11, nº 3.
pp. 459-486.
Nassif, Nabil, Kajl, Stanislaw and Sabourin, Robert.
2005.
« Ventilation control strategy using supply CO2 concentration setpoint ».
HVAC&R Research, vol. 11, nº 2.
pp. 239-262.
Nassif, Nabil, Kajl, Stanislaw and Sabourin, Robert.
2005.
« Simplified model-based optimal control of VAV air-conditioning system ».
In IBPSA 2005 - International Building Performance Simulation Association 2005 (Montreal, QC, Canada, Aug. 15-18, 2005)
pp. 823-830.
USA : International Building Performance Simulation Association.
Nassif, N., Kajl, Stanislaw and Sabourin, Robert.
2005.
« ASHRAE standard's 62 multiple spaces equation for design and control ».
In Proceedings from 10th International Conference on Indoor Air Quality and Climate (Beijing, China, Sept. 4-9, 2005)
International Society of Indoor Air Quality and Climate.
Nassif, N., Kajl, Stanislaw and Sabourin, Robert.
2005.
« Optimal operation of VAV air-conditioning system ».
In Air Conditioning, Protection & District Heating 2005 : XI International Conference, Wroclaw - Szklarska, 23-26 June 2005 (Wroclaw, Poland, June 23-26, 2005)
pp. 435-440.
Wroclaw : Edition PZITS. Kara, Nadjia
Issa, Omneya, Kara, Nadja and Courtemanche, Marc.
2005.
« Forward link performance analysis of a deployed CDMA2000 network ».
In 12th IEEE International Conference on Electronics, Circuits and Systems (Gammarth, Tunisia, Dec. 11-15, 2005)
Institute of Electrical and Electronics Engineers.
Kara, N., Issa, O. and Byette, A..
2005.
« Real 3G WCDMA networks performance analysis ».
In The IEEE Conference on Local Computer Networks 30th Anniversary (LCN'05) (Sydney, NSW, Australia, Nov. 17, 2005)
pp. 586-592.
Institute of Electrical and Electronics Engineers. Kenné, Jean-Pierre
Dehayem Nodem, F. I., Kenné, Jean-Pierre and Gharbi, Ali.
2005.
« Capacity expansion production and maintenance planning in stochastic manufacturing systems ».
In International Conference on Numerical Analysis and Applied Mathematics (ICNAAM) (Rhodes, Greece, Sept. 16-20, 2005)
pp. 423-427.
Weinheim, Germany : Wiley-VCH Verlag.
Kadissi, C., Kenné, Jean-Pierre and Saad, Maarouf.
2005.
« Drive by wire control of an electro-hydraulic active suspension, a backstepping approach ».
In IEEE Conference on Control Applications (CCA) (Toronto, Canada, Aug. 28-31, 2005)
pp. 1581-1587.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Gharbi, Ali and Kenné, Jean Pierre.
2005.
« Maintenance scheduling and production control of multiple-machine manufacturing systems ».
Computers and Industrial Engineering, vol. 48, nº 4.
pp. 693-707.
Charlot, E., Kenné, Jean-Pierre and Nadeau, Sylvie.
2005.
« Optimal production and lockout/tagout control policies in manufacturing systems ».
In 4th International Conference Safety of Industrial Automated Systems (SIAS) (Chicago, IL, USA, Sept. 26-28, 2005)
Boulet, J.-F., Gharbi, Ali and Kenné, Jean-Pierre.
2005.
« Production and corrective maintenance rate policy improvement in an unreliable failure prone manufacturing systems ».
In 35th International Conference on Computer and Industrial Engineering (Istanbul, Turkey, June 19-22, 2005)
pp. 321-326.
Gharbi, Ali, Kenné, Jean-Pierre and Boulet, J.-F..
2005.
« Amélioration des taux de production et de maintenance corrective d'un système de production ».
In 6ième Congrès International de Génie Industriel (Besançon, France, 7-10 juin 2005)
Nkeungoué, L. J. and Kenné, J. P..
2005.
« Quality control and production planning problem of failure prone manufacturing systems ».
In Proceedings of the 24th IASTED International Conference on Modeling, Identification, and Control (MIC) (Innsbruck; Austria, Feb. 16-18, 2005)
pp. 571-576.
Anaheim ; Calgary : ACTA Press. Kouki, Ammar B.
Birafane, Ahmed and Kouki, Ammar B..
2005.
« Phase-only predistortion for LINC amplifiers with chireix-outphasing combiners ».
IEEE Transactions on Microwave Theory and Techniques , vol. 53, nº 6.
pp. 2240-2250.
Dousset, D., Issaoun, A., Ghannouchi, F.M. and Kouki, Ammar B..
2005.
« Wideband closed-form expressions for direct extraction of HBT small-signal parameters for all amplifier bias classes ».
IEE Proceedings - Circuits, Devices and Systems, vol. 152, nº 5.
441 - 450.
Issaoun, A. , Ghannouchi, F.M. and Kouki, Ammar B..
2005.
« An accurate and compact large signal model for III–V HBT devices ».
Solid-State Electronics, vol. 49, nº 12.
pp. 1909-1916.
Issaoun, Ammar, Ghannouchi, Fadhel M. and Kouki, Ammar B..
2005.
« Importance of the absolute electrical length of the outphasing combiner in LINC amplification systems ».
In Asia-Pacific Microwave Conference (APMC) (Suzhou, China, Dec. 04-07, 2005)
IEEE. Lameiras Koerich, Alessandro
Koerich, Alessandro L., Sabourin, Robert and Suen, Ching Y..
2005.
« Recognition and verification of unconstrained handwritten words ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 27, nº 10.
pp. 1509-1522.
Koerich, A. L. and Kalva, P. R..
2005.
« Unconstrained handwritten character recognition using metaclasses of characters ».
In IEEE International Conference on Image Processing, 2005. ICIP 2005 (Genoa, Italy, Sept. 11-14, 2005)
II-542-545.
Koerich, A. L. and Poitevin, C..
2005.
« Combination of homogeneous classifiers for musical genre classification ».
In 2005 IEEE International Conference on Systems, Man and Cybernetics (Waikoloa, HI, USA, Oct. 10-12, 2005)
pp. 554-559.
Nagornni Jr., R. and Koerich, A. L.. 2005. « Localização e segmentação de texto em vídeo digital ». Rocha, G. M., Szczepanik, T. E. and Koerich, A. L.. 2005. « Detecção e segmentação de objetos de interesse em vídeo digital ».
Silla Jr., C. N., Kaestner, C. A. and Koerich, A. L..
2005.
« Classificação automática de gêneros musicais utilizando métodos de bagging e boosting ».
In 10th Brazilian Symposium on Computer Music (SBCM) (Belo Horizonte, Brasil, Oct. 3-5, 2005)
pp. 48-57.
Landry, Jacques-André
Da Costa, Luis and Landry, Jacques-André.
2005.
« Generating grammatical plant models with genetic algorithms ».
In Adaptive and Natural Computing Algorithms: Proceedings of the International Conference in Coimbra, Portugal, 2005 (Coimbra, Portugal, March 21-23, 2005)
pp. 230-234.
Vienna : Springer-Verlag/Wien.
Fennir, M. A., Landry, Jacques-André and Raghavan, G. S. V..
2005.
« Respiration rate of potatoes (solanum tubersum L.) as affected by soft rot (Erwinia Carotovora) and determined at various storage temperatures ».
West Indian Journal of Engineering, vol. 27, nº 2.
pp. 62-71. Vigneault, C., Markarian, N. R., Landry, Jacques-André, Charles, M.T. and Toussaint, V.. 2005. « Control of environmental conditions for carrot storage : Why and how? ». Communication lors de la conférence : 31e Conférence Annuelle de la SCSH (Longueuil, QC, Canada, Sept. 11-14, 2005). Lachance, F., Landry, Jacques-André and Laberge, B.. 2005. « Modélisation des échanges thermiques et d'humidité dans un bâtiment d'élevage avicole commercial ». Communication lors de la conférence : Journée Scientifique et Technique en Génie Agroalimentaire (Saint-Hyacinthe, QC, Canada, 23 mars 2005). Da Costa, E. Luis and Landry, Jacques-André. 2005. « Generating grammatical plant models with genetic algorithms ». Communication lors de la conférence : International Conference on Adaptive and Natural Computing Algorithms (Coimbra, Portugal, Mar. 21-23, 2005).
Lachance, François, Landry, Jacques-André and Laberge, Benoît.
2005.
« Modélisation des échanges thermiques et d'humidité dans un bâtiment d'élevage avicole commercial ».
In Journée Scientifique et Technique en Génie Agroalimentaire (Saint-Hyacinthe, QC, Canada, 23 mars 2005)
pp. 133-137.
Vigneault, C., Markarian, N. R., Landry, Jacques-André, Charles, M. T. and Toussaint, V..
2005.
« Control of environmental conditions for carrot storage: Why and how? ».
[Conference paper summary]. Phytoprotection, vol. 86.
p. 146. Landry, René Jr
Constantinescu, Aurélian and Landry, René Jr.
2005.
« GPS/Galiléo/GLONASS hybrid satellite constellation simulator GPS constellation validation and analysis ».
In Proceedings of the 61st Annual Meeting of The Institute of Navigation (Cambridge, MA, USA, June 27-29, 2005)
pp. 733-744.
Insitute of Navigation.
Constantinescu, Aurélian, Landry, René Jr and Ilie, Iurie.
2005.
« Hybrid GPS/Galiléo/GLONASS IF software signal generator ».
In 18th International Technical Meeting of the Satellite Division of the Institute of Navigation (ION GNSS) (Long Beach, CA, USA, Sept.13-16, 2005)
pp. 1233-1244.
Manassas, VA, USA : The Institute of Navigation.
Giroux, Richard, Landry, René Jr and Gourdeau, Richard.
2005.
« Extended kalman filter implementation for low-cost INS/GPS integration in a fast prototyping environment ».
In 16th Symposium on Navigation of the Canadian Navigation Society (Toronto, ON, Canada, Apr. 26-27, 2005)
pp. 1-10.
The Canadian Aeronautics and Space Institute (CASI).
Ilie, Iurie, Landry, René Jr. and Constantinescu, Aurelian.
2005.
« Simulation of GPS and Galileo architectures for anti-jamming and multipath analysis ».
Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada, vol. 51, nº 1.
pp. 13-22.
Giroux, Richard, Gourdeau, Richard and Landry, René Jr..
2005.
« Inertial navigation system/global positioning system fusion algorithm design in a fast prototyping environment: towards a real-time implementation ».
Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada, vol. 51, nº 3.
pp. 133-144.
Bennour, Zied, Landry, René Jr and Constantinescu, Aurélian.
2005.
« Web-based MEMS inertial navigation simulator ».
In Annual Meeting - Institute of Navigation (ION) (Cambridge, MA, USA, June 27-29, 2005)
pp. 1053-1061.
Manassas, VA, USA : Institute of Navigation. Langar, Rami
Abdennebi, Marwen, Langar, Rami and Tohme, Samir.
2005.
« CIPMAN: combining cellular IP and mobile ad hoc networks in a hop by hop all radio access network ».
In 13th IEEE International Conference on Networks Jointly held with the 2005 IEEE 7th Malaysia International Conference on Communications (Kuala Lumpur, Malaysia, Nov. 16-18, 2005)
IEEE.
Langar, Rami, Le Grand, Gwendal and Tohme, Samir.
2005.
« Fast handoff process in micro mobile MPLS protocol for micro-mobility management in next generation networks ».
In Second Annual Conference on Wireless On-demand Network Systems and Services (St. Moritz, Switzerland, Jan. 19-21, 2005)
pp. 252-257.
IEEE.
Langar, Rami, Tohme, Samir, Bouabdallah, Nizar and Pujolle, Guy.
2005.
« Performance analysis of micro mobile MPLS for future wireless networks ».
In IEEE 16th International Symposium on Personal, Indoor and Mobile Radio Communications (Berlin, Germany, Sept. 11-14, 2005)
pp. 2126-2130.
IEEE.
Langar, Rami, Tohme, Samir and Le Grand, Gwendal.
2005.
« Micro mobile MPLS: a new scheme for micro-mobility management in 3G all-IP networks ».
In 10th IEEE Symposium on Computers and Communications (ISCC'05) (Murcia, Spain, June 27-30, 2005)
pp. 301-306.
IEEE. Lapalme, James
Lapalme, James, Aboulhamid, El Mostapha and Nicolescu, Gabriela.
2005.
« Leveraging model representations for system level design tools ».
In The 16th International Workshop on Rapid System Prototyping (RSP 2005) (Montreal, QC, Canada, June 8-10, 2005)
pp. 33-39.
Los Alamitos, CA, USA : IEEE. Laporte, Claude Y.
Laporte, Claude Y., April, Alain and Renault, Alain.
2005.
« L'application des normes de génie logiciel dans les très petites entreprises: historiques et premiers résultats ».
Génie Logiciel, nº 75.
pp. 7-12.
Cote, Marc-Alexis, Suryn, Witold, Laporte, Claude Y. and Martin, Robert A..
2005.
« The evolution path for industrial software quality evaluation methods applying ISO/IEC 9126:2001 quality model : example of MITRE's SQAE method ».
Software Quality Journal, vol. 13, nº 1.
pp. 17-30.
Laporte, Claude Y., Bourque, Pierre, Belkebir, Youssef and Doucet, Mikel.
2005.
« Amélioration de la définition des rôles du processus de génie logiciel de la société Bombardier Transport ».
Génie logiciel, nº 72.
pp. 43-52. Laporte, Claude Y. and April, Alain. 2005. « Applying software engineering standards in small settings : recent perspectives and initial achievement ». Communication lors de la conférence : 1st International Research Workshop for Process Improvement in Small Settings (Pittsburgh, PA, USA, Oct. 19-20, 2005).
Laporte, Claude Y. and April, Alain.
2005.
« Applying software engineering standards in small settings : recent historical perspectives and initial achievement ».
In 1st International Research Workshop for Process Improvement in Small Settings (Pittsburgh, PA, USA, Oct. 19-20, 2005)
pp. 1-9.
Software Engineering Institute.
Laporte, Claude Y., Desharnais, Jean-Marc, Abouelfattah, Mohamed Mounir, Bamba, Jean-Claude, Renault, Alain and Habra, Naji.
2005.
« Initiating software process improvement in small enterprises : experiments with micro-evaluation framework ».
In International Conference on Software Development (Reykjavik, Iceland, May 27-June 1, 2005)
pp. 153-163.
Laville, Frédéric
Thomas, Marc and Laville, Frédéric.
2005.
« Simulation des vibrations mécaniques par Matlab, Simulink et Ansys ».
Québec : Presses de l'Université du Québec. 702 p.
Voix, Jérémie and Laville, Frédéric.
2005.
« Problématiques associées au développement d'un bouchon d'oreille "intelligent" ».
Perspectives Interdisciplinaires sur le Travail et la Santé, vol. 7, nº 2.
Voix, Jérémie, Laville, Frédéric and Zeidan, Jean. 2005. « In-situ personal assessment of hearing protector performance--recommendations for an updated standard ». Communication lors de la conférence : 149th Meeting of the Acoustical Society of America (Vancouver, B.C, Canada, May 16-20, 2005). Leconte, Robert
Pion, Caroline, Leconte, Robert, Rousselle, Jean and Gagnon, Sébastien.
2005.
« Modélisation de l'évapotranspiration réelle à l'échelle régionale pour des bassins versants situés en région boréale ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 32, nº 5.
pp. 839-852.
Temimi, Marouane, Leconte, Robert, Brissette, François and Chaouch, Naira.
2005.
« Flood monitoring over the Mackenzie River Basin using passive microwave data ».
Remote Sensing of Environment, vol. 98, nº 2-3.
344-355 .
Pietroniro, Alain, Töyrä, Jessika, Leconte, Robert and Kite, Geoff.
2005.
« Remote sensing of surface water and soil moisture ».
In
Remote sensing in northern hydrology : measuring environmental change.
Coll. « Geophysical monograph series », vol. 163.
pp. 119-142. Washington, D. C. : AGU.
Pietroniro, A. and Leconte, R..
2005.
« A review of Canadian remote sensing and hydrology, 1999-2003 ».
Hydrological Processes, vol. 19, nº 1.
pp. 285-301.
Temimi, M., Leconte, R., Brissette, F. and Chaouch, N..
2005.
« Flood and soil wetness monitoring over the Mackenzie River Basin using AMSR-E 37 GHz brightness temperature ».
In 2005 IEEE International Geoscience and Remote Sensing Symposium (IGARSS '05) (Seoul, South Korea, July 29, 2005)
pp. 59-62.
IEEE. Lefebvre, Éric
Gil, Blanca and Lefebvre, Éric.
2005.
« Maturity of the MDA tool-assisted development process using business archetypes : a case study ».
In International Conference on Software Engineering Research and Practice (SERP) (Las Vegas, NV, USA, June 27-30, 2005)
pp. 375-381.
USA : CSREA Press.
Lefebvre, Éric.
2005.
« Building MDA platform-independent models using business archetypes and patterns ».
In Proceedings of the Montreal Conference on E-Technologies (MCeTech) (Montreal, QC, Canada, Jan. 20-21, 2005)
pp. 127-135.
Lejeune, Michel
Hart, Sylvie Ann, Gamache, Martin and Lejeune, Michel.
2005.
« La formalisation des pratiques de formation dans les PME manufacturières québécoises ».
Montréal : INRS Urbanisation, Culture et Société. Lejeune, Michel. 2005. « La transmission des savoirs tacites en milieu de travail : le rôle de la communauté de pratique, du climat organisationnel et de la forme de l'organisation ». These. Montréal, Université de Montréal, 284 p.
Lesemann, Frédéric, Lejeune, Michel and Hart, Sylvie Ann.
2005.
« Inventaire international et documentation des dispositifs nationaux de qualification professionnelle (France, États-Unis, Espagne, Italie, Portugal, Suisse et Mexique ».
Montréal : Institut national de la recherche scientifique, Centre urbanisation culture société. 166 p. Lemieux, SylvainBlain, M., Lemieux, Sylvain and Houde, R.. 2005. « Kalman filter for an industrial ROV ». Communication lors de la conférence : Underwater Intervention 2005 (New Orleans, LA, USA, Feb. 14-16, 2005). Lepage, RichardLepage, Richard. 2005. « Analyse de la variabilité en vision par ordinateur ». Communication lors de la conférence : Traitement et Analyse de l'Information, Méthodes et Applications (TAIMA) (Hammamet, Tunisie, 26 sept.-1 oct. 2005). Lepage, Richard. 2005. « Vision artificielle pour l'estimation de la qualité d'un fruit ». Communication lors de la conférence : Rendez-Vous de l'Automatisation (Montréal, QC, Canada, 21-22 sept. 2005). Lepage, Richard. 2005. « Estimation de la teneur en anthocyane au moyen de l'analyse par composantes principales (ACP) de la couleur des canneberges ». Communication lors de la conférence : Traitement et Analyse de l'Information, Méthodes et Applications (TAIMA) (Hammamet, Tunisie, 26 sept.-1 oct. 2005).
Ben Azouz, Zouhour, Shu, Chang, Lepage, Richard and Rioux, Marc.
2005.
« Extracting main modes of human body shape variation from 3D anthropometric data ».
In Proceedings - 5th International Conference on 3-D Digital Imaging and Modeling, 3DIM 2005 (Ottawa, ON, Canada, June 13-16, 2005)
pp. 335-342.
Washington, D. C., USA : IEEE Computer Society.
Lepage, Richard, Ben Azouz, Z. and Rioux, Michel.
2005.
« Analyse de la variation de la forme en anthropométrie 3D ».
In Actes des 4e Ateliers sur Traitement et Analyse de l'Information : Méthodes et Applications (TAIMA) (Hammamet, Tunisie, 26 sept.-1 oct. 2005)
pp. 471-478.
Lepage, Richard, Doyon, G. and Chherawala, Y..
2005.
« Vision artificielle pour l'estimation de la qualité d'un fruit ».
In Actes du Rendez-vous de l'Automatisation (Montréal, QC, Canada, 21-22 sept. 2005)
Montréal, Québec : Le Centre de Recherche Industrielle du Québec (CRIQ).
Lepage, Richard, Lussier, J.-S. and Doyon, G..
2005.
« Estimation de la teneur en anthocyane au moyen de l'analyse par composantes principales (ACP) de la couleur des canneberges ».
In Actes des 4e Ateliers sur Traitement et Analyse de l'Information : Méthodes et Applications (TAIMA) (Hammamet, Tunisie, 26 sept.-1 oct. 2005)
pp. 517-522.
Lerouge, Sophie
Nelea, Valentin, Luo, Li, Demers, Caroline N., Antoniou, John, Petit, Alain, Lerouge, Sophie, Wertheimer, Michael R. and Mwale, Fackson.
2005.
« Selective inhibition of type X collagen expression in human Mesenchymal stem cell differentiation on polymer substrates surface-modified by glow discharge plasma ».
Journal of Biomedical Materials Research - Part A, vol. 75A, nº 1.
pp. 216-223.
Fromageau, Jérémie, Lerouge, Sophie, Soulez, Gilles, Salazkin, Igor, Raymond, Jean and Cloutier, Guy.
2005.
« A feasibility study of elastography on abdominal aneurysms ».
In 2005 IEEE Ultrasonics Symposium (Rotterdam, The Netherlands, Sept. 18-21, 2005)
pp. 257-260.
IEEE. Fromageau, Jérémie, Lerouge, Sophie, Soulez, Gilles, Salazkin, Igor, Raymond, Jean and Cloutier, Guy. 2005. « A feasibility study of elastography on abdominal aneurysms ». Communication lors de la conférence : 2005 IEEE Ultrasonics Symposium (Rotterdam, The Netherlands, Sept. 18-21, 2005). Girard-Lauriault, P. L., Mwale, F., Iordanova, M., Demers, C., Desjardins, P., S., Lerouge. and Wertheimer, M. R.. 2005. « Atmospheric pressure deposition of micropatterned n-rich plasma-polymer films for tissue engineering ». Communication lors de la conférence : 17th International Symposium on Plasma Chemistry (ISPC-17) (Toronto, ON, Canada, Aug. 7-12, 2005). Girard-Lauriault, P. L., Mwale, F., Lerouge, S., Iordanova, I., Demers, C., Desjardins, P. and Wertheimer, M. R.. 2005. « Atmospheric pressure deposition of micropatterned n-rich plasma-polymer films for tissue engineering ». Communication lors de la conférence : 24th Canadian Biomaterials Society Conference (Waterloo, ON, Canada, May 26-28, 2005). Soulez, Gilles, Lerouge, Sophie, Raymond, Jean, Salazkine, Igor, Giroux, Marie France and Oliva, Vincent L.. 2005. « Experimental model of type I endoleak after endovascular repair of aneurysm (EVAR): influence of collateral flow ». Communication lors de la conférence : 30th Annual Scientific Meeting of the Society of Interventional Radiology (New Orleans, LA, USA, Mar. 31-Apr. 5, 2005).
Girard-Lauriault, P. L., Mwale, F., Iordanova, M., Demers, C., Desjardins, P., Lerouge, S. and Wertheimer, M. R..
2005.
« Atmospheric pressure deposition of micropatterned n-rich plasma-polymer films for tissue engineering ».
In 17th International Symposium on Plasma Chemistry: abstracts and full-papers CD: August 7th-12th, 2005, Toronto, Canada (Toronto, ON, Canada, Aug. 7-12, 2005)
Toronto, ON, Canada : International Plasma Chemistry Society.
Lerouge, S., Schloesser, K., Qin, Z., Cloutier, J., Raymond, J. and Soulez, G..
2005.
« The effect of radioactive stent-grafts on neointima formation and implant fixation in the vessel wall ».
In Transactions of the 30th annual meeting: Society for Biomaterials: April 27-30, 2005, Memphis Cook Convention Center, Memphis, TN, USA (Memphis, TN, USA, Apr. 27-30, 2005)
pp. 46-47.
Mount Laurel, NJ, USA : Society for Biomaterials.
Soulez, G., Lerouge, S., Schloesser, K., Qin, Z., Gaboury, L., Oliva, V. L. and Raymond, J..
2005.
« Effet de la radioactivité basse dose sur l’incorporation vasculaire des endogreffes ».
[Conference paper summary]. Journal de Radiologie, vol. 86, nº 10.
p. 1318. Lerouge, S., Schloesser, K., Qin, Z., Cloutier, G., Normandeau, L., Raymond, G. and Soulez, G.. 2005. « The effect of radioactive stent-grafts on neointimal formation and implant fixation into arterial wall ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, April 3-6, 2005). Major, A., Blair, J. F., Guidoin, R., Qin, Z., Cloutier, G., Soulez, G. and Lerouge, S.. 2005. « Inadequate healing after endovascular repair of aortic abdominal aneurysm: analysis of explants ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, April 3-6, 2005). Nelea, V., Luo, L., Antoniou, J., Demers, C. N., Lerouge, S., Petit, A., Wertheimer, M. R. and Mwale, F.. 2005. « Selective inhibition of type X collagen expression in human Mesenchymal stem cell differentiation on polymer substrates surface-modified by glow discharge plasma ». Affiche présentée lors de la conférence : Canadian Operational Research Society (CORS 2005) (Halifax, NS, Canada, May 16-18, 2005). Nelea, V., Luo, L., Demers, C. N., Antoniou, J., Lerouge, S., Wertheimer, M. R. and Mwale, F.. 2005. « Human mesenchymal stem cells cultured on polymer substrates surface-modified by glow discharge plasma: selective inhibition of type X collagen ». Affiche présentée lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, April 3-6, 2005). Lina, Jean-Marc
Daunizeau, Jean, Grova, Christophe, Mattout, Jérémie, Marrelec, Guillaume, Clonda, Diego, Goulard, Bernard, Pélégrini-Issac, Mélanie, Lina, Jean-Marc and Benali, Habib.
2005.
« Assessing the relevance of fMRI-based prior in the EEG inverse problem : a bayesian model comparison approach ».
IEEE Transactions on Signal Processing, vol. 53, nº 9.
pp. 3461-3472. Liu, Zhaoheng
Melhem, Khoder, Liu, Zhaoheng and Loria, Antonio.
2005.
« A unified framework for dynamics and lyapunov stability of holonomically constrained rigid bodies ».
Journal of Advanced Computational Intelligence and Intelligent Informatics, vol. 9, nº 4.
pp. 387-394.
Melhem, K. and Liu, Zhaoheng.
2005.
« A unified modeling and stabilization framework for interconnected rigid bodies ».
In
Intelligent systems at the service of mankind.
pp. 141-160. Germany : Ubooks.
Zhao, Jian-Hua, Dao, Thien-My and Liu, Zhaoheng.
2005.
« Optimization of mechanical systems reliability using ant colony based simulation approach ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Cancun, Mexico, May 18-20, 2005)
pp. 182-187.
Calgary, Canada : ACTA Press.
Zhao, Jian Hua, Liu, Zhaoheng and Dao, My-Thien.
2005.
« Solving reliability optimal design problem using ant colony system (ACS) approaches ».
In Proceedings of the 15th International CIRP Design Seminar (Shanghai, China, May 22-25, 2005)
pp. 32-40.
Lopez-Herrejon, Roberto E.
Lopez-Herrejon, Roberto E., Batory, Don and Cook, William.
2005.
« Evaluating support for features in advanced modularization technologies ».
In ECOOP 2005 - Object-Oriented Programming : 19th European Conference, Glasgow, UK, July 25-29, 2005. Proceedings (Glasgow, United Kingdom, July 25-29, 2005)
Coll. « Lecture Notes in Computer Science », vol. 3586.
pp. 169-194.
Springer.
Mitra, S., Lopez-Herrejon, R. E., Zimmaro, D., Johnson, M. and Schulman, M..
2005.
« An assessment of the effectiveness of interactive technology in an introductory programming course for non-majors ».
In Proceedings Frontiers in Education 35th Annual Conference (Indianopolis, IN, USA, Oct. 19-22, 2005)
S3C-17-S13C-22.
IEEE. Lê, Van Ngan
Champliaud, Henri, Lajmi, Abdelmajid and Lê, Ngan Van.
2005.
« Finite element analysis of a three-point belt tension tester ».
In Non-Conference Specific Technical Papers (Troy, MI, USA, Sept. 1, 2005)
Coll. « SAE Technical Papers », vol. 2005-01-3137.
SAE.
Champliaud, Henri, Lajmi, Abdelmajid and Lê, Ngan Van.
2005.
« Finite element analysis of a three-point belt tension tester ».
SAE Transactions : Journal of Engines, vol. 114, nº 3.
pp. 1533-1538.
Lê, Van Ngan and Foisy, R..
2005.
« Finite element assisted fatigue analysis of welded steel construction according to AISC code ».
In Fatigue Design Conference (Senlis, France, Nov. 16-18, 2005)
Senlis, France : Centre technique des industries mécaniques (CETIM). Maranzana, RolandTremblay, T.G., Rivest, Louis, Lamarche, Bruno and Maranzana, Roland. 2005. « Vers une application généralisée du concept de lien technologique en développement de produits : Terminologie des associations ». Communication lors de la conférence : 24e Salon International des Systèmes d'Information, Technologies, Méthodologies et Services pour la Conception, la Fabrication et la Gestion du Cycle de vie Produit (MICAD) (Paris, France, 5-7 avril 2005). Maref, Wahid
Cornick, S. M., Maref, W., Abdulghani, K. and Van Reenen, D..
2005.
« Maintenant disponible! – La version 1-D du modèle hygIRC pour évaluer la performance hygrométrique des murs ».
Innovation en Construction, vol. 10, nº 1.
p. 6.
Cornick, S. M., Maref, W., Abdulghani, K. and Van Reenen, D..
2005.
« Now available! 1-D version of hygIRC model for assessing wall moisture performance ».
Construction Innovation, vol. 10, nº 1.
p. 6.
Cornick, S. M., Maref, W. and Lacasse, M. A..
2005.
« The Virtual lab: a research complement to the integrated design process ».
In 10th Canadian Conference on Building Science and Technology : Building science and the Integrated Design Process : Proceedings (Ottawa, ON, Canada, May 12-13, 2005)
pp. 63-73.
Building Envelope Council.
Dalgliesh, Alan, Cornick, Steve, Maref, Wahid and Mukhopadhyaya, Phalguni.
2005.
« Hygrothermal performance of building envelopes: uses for 2D and 1D simulation ».
In 10th Canadian Conference on Building Science and Technology : Building science and the Integrated Design Process : Proceedings (Ottawa, ON, Canada, May 12-13, 2005)
pp. 32-41.
Building Envelope Council. Masounave, Jacques
David, Éric, Dabbagui, Abderrezzak, Dubreuil, Isabelle and Masounave, Jacques.
2005.
« Electrical measurements used as nondestructive evaluation technique for the characterization of micro-size particle reinforced polymeric matrix composites ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montréal, Canada, Aug. 1-4, 2005)
pp. 87-95.
Montréal, Qué., Canada : École de technologie supérieure. David, Éric, Dabbagui, A., Dubreuil, I. and Masounave, Jacques. 2005. « Time and frequency domain dielectric measurements used as nondestructive evaluation technique for the characterization of micro-size particle reinforced polymeric matrix composites ». Communication lors de la conférence : 7th International Conference on Mesomechanics (MESO) (Montreal, QC, Canada, Aug. 1-4, 2005). Masson, Christian
Leclerc, Christophe and Masson, Christian.
2005.
« Wind turbine performance predictions using a differential actuator-lifting disk model ».
Journal of Solar Energy Engineering, vol. 127, nº 2.
pp. 200-208. McGuffin, Michael John
McGuffin, M. J. and Balakrishnan, R..
2005.
« Fitts' law and expanding targets: Experimental studies and designs for user interfaces ».
ACM Transactions on Computer-Human Interaction, vol. 12, nº 4.
pp. 388-422.
McGuffin, M. J. and Balakrishnan, R..
2005.
« Interactive visualization of genealogical graphs ».
In IEEE Symposium on Information Visualization (INFOVIS) (Minneapolis, MN, USA, Oct. 23-25, 2005)
pp. 17-24.
Institute of Electrical and Electronics Engineers.
Shengdong, Z., McGuffin, M. J. and Chignell, M. H..
2005.
« Elastic hierarchies: Combining treemaps and node-link diagrams ».
In IEEE Symposium on Information Visualization (INFOVIS) (Minneapolis, MN, USA, Oct. 23-25, 2005)
pp. 57-64.
Institute of Electrical and Electronics Engineers. Melhado, Silvio
Bertezini, A. L. and Melhado, S. B..
2005.
« Avaliação do processo de projeto de arquitetura sob a ótica do cliente contratante ».
In Anais do IV Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) e I Encontro Latino Americano de Gestão e Economia da Construção (ELAGEC) (Porto Alegre, Brazil, Oct. 24-26, 2005)
Porto Alegre : ANTAC.
Bertezini, A. L. and Melhado, S. B..
2005.
« Como os arquitetos avaliam o resultado dos seus projetos ».
In Anais do V Workshop brasileiro de gestão do processo de projeto na construção de edifícios
Florianopolis : UFSC.
Bertezini, A. L., Ohashi, E. A. M., Santos, E. T. and Melhado, S. B..
2005.
« Diretrizes para estruturação de informações em sites de empresas construtoras e incorporadoras de edifícios ».
In II Seminário de Tecnologia da Informação e Comunicação na Construção Civil (TIC 2005) (São Paulo, Brazil, Apr. 07-08, 2005)
Sao Paulo : PCC-USP.
Fabricio, M. M. and Melhado, S. B..
2005.
« Formação Projetual em Arquitetura e Coordenação de Projetos Multidisciplinares de Edifícios ».
In Anais do PROJETAR 2005: Seminário Sobre Ensino e Pesquisa em Projeto de Arquitetura (Rio de Janeiro, Brazil, Nov. 08-11, 2005)
Fabricio, M. M., Souza, A. L. R., Fontenelle, E. C., Grilo, L. M. and Melhado, S. B..
2005.
« A coordenação de projetos ».
In
Coordenação de projetos de edificações.
pp. 71-85. São Paulo : O Nome da Rosa.
Fabricio, Marcio and Melhado, Silvio.
2005.
« Integrated product development in the building construction: case studies in Brazilian building companies ».
In Proceedings of CIB W096 conference - designing value: New directions in architectural management (Copenhagen, Denmark, Nov. 02-04, 2005)
pp. 241-252.
Rotterdam : CIB.
Ferreira, R. C., Santos, F. A. and Melhado, S. B..
2005.
« Análise de custos relacionados a desperdícios em obra e a utilização de projetos para produção ».
In Anais do IV Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) e I Encontro Latino Americano de Gestão e Economia da Construção (ELAGEC) (Porto Alegre, Brazil, Oct. 24-26, 2005)
Porto Alegre : ANTAC.
Grilo, L. M., Melhado, S., Silva, S. A. R., Edwards, P. and Hardcastle, C..
2005.
« International building design management: results from a case study in São Paulo ».
In Proceedings of CIB W096 Conference - Designing Value: New Directions in Architectural Management (Copenhague, Danemark, Nov. 02-04, 2005)
pp. 167-178.
Rotterdam : CIB.
Grilo, Leonardo Melhorato, Melhado, Silvio Burratino, Silva, Sergio Alfredo Rosa and Fabricio, Marcio Minto.
2005.
« Challenges and opportunities for design firms in the Brazilian building industry ».
In 4th CIB Triennial International Conference: Rethinking and Revitalizing Construction Safety, Health, Environment and Quality (Port Elizabeth, South Africa, May 17-20, 2005)
pp. 28-37.
Rotterdam : CIB.
Manzione, L. and Melhado, S. B..
2005.
« A utilização de modelos matriciais para o gerenciamento do fluxo de informações de projetos ».
In Anais do V Workshop brasileiro de gestão do processo de projeto na construção de edifícios
Florianopolis : UFSC.
Manzione, L. and Melhado, S. B..
2005.
« Estudo de modelos matriciais para a organização do fluxo de atividades de projeto ».
In Anais do IV Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) e I Encontro Latino Americano de Gestão e Economia da Construção (ELAGEC) (Porto Alegre, Brazil, Oct. 24-26, 2005)
Porte Alegre : ANTAC.
Manzione, Leonardo and Melhado, Sílvio Burrattino.
2005.
« Extranets de projeto: situação atual e necessidades de evolução ».
In II Seminário de Tecnologia da Informação e Comunicação na Construção Civil (TIC 2005) (São Paulo, Brazil, Apr. 07-08, 2005)
Sao Paulo : PCC-USP.
Melhado, S. B..
2005.
« Conclusões e perspectivas de evolução ».
In
Coordenação de projetos de edificações.
pp. 105-108. São Paulo : O Nome da Rosa.
Melhado, S. B..
2005.
« Introdução ao tema ».
In
Coordenação de projetos de edificações.
pp. 11-23. São Paulo : O Nome da Rosa.
Melhado, S. B..
2005.
« Novos desafios para a evolução do processo de projeto de edificações ».
In Anais do V Workshop brasileiro de gestão do processo de projeto na construção de edifícios
Florianopolis : UFSC.
Melhado, S. B..
2005.
« Proposição de um programa nacional de qualificação de empresas e de profissionais de projeto ».
In Anais do IV Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) e I Encontro Latino Americano de Gestão e Economia da Construção (ELAGEC) (Porto Alegre, Brazil, Oct. 24-26, 2005)
Porte Alegre : ANTAC.
Melhado, S. B. and Souza, A. L. R..
2005.
« Qualité et gestion des projets dans le bâtiment : Repères sur les réalités brésiliennes ».
In Rencontres RAMAU 2005 : Qualité et maîtrise des processus dans les projets d'édifices : Actes (Paris, France, Mar. 31-Apr. 01, 2005)
Paris : Éditions de la Villette.
Melhado, S.B..
2005.
« Coordenação de projetos de edificações ».
São Paulo : O Nome da Rosa. 120 p.
Melhado, Silvio B..
2005.
« Um programa para qualificacao de empresas e de profissionais de projeto ».
Concreto, vol. 39.
pp. 40-44.
Melhado, Sílvio Burrattino and Mesquita, Maria Julia de Moraes.
2005.
« Gestão do ciclo de vida do empreendimento: estratégias para sua eficiência e eficácia com base na interface operação-concepção ».
In Anais do IV Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) e I Encontro Latino Americano de Gestão e Economia da Construção (ELAGEC) (Porto Alegre, Brazil, Oct. 24-26, 2005)
Porto Alegre : ANTAC.
Ohashi, E. A. M. and Melhado, S. B..
2005.
« Diagnóstico do sistema de indicadores de desempenho utilizado em empresas construtoras de Belém-PA ».
In Anais do IV Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) e I Encontro Latino Americano de Gestão e Economia da Construção (ELAGEC) (Porto Alegre, Brazil, Oct. 24-26, 2005)
Porto Alegre : ANTAC.
Oliveira, L. A. and Melhado, S. B..
2005.
« Análise da qualidade do processo de projeto em função da ocorrência de problemas na etapa de execução da obra: estudos de caso ».
In Anais do IV Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) e I Encontro Latino Americano de Gestão e Economia da Construção (ELAGEC) (Porto Alegre, Brazil, Oct. 24-26, 2005)
Porte Alegre : ANTAC.
Oliveira, O. J. and Melhado, S. B..
2005.
« Modelo de gestão para pequenas empresas de projeto de edifícios ».
In Anais do IV Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) e I Encontro Latino Americano de Gestão e Economia da Construção (ELAGEC) (Porto Alegre, Brazil, Oct. 24-26, 2005)
Porte Alegre : ANTAC.
Oliveira, O. J. and Melhado, S. B..
2005.
« Modelo de gestão para pequenas empresas de projeto de edifícios ».
In Anais do V Workshop brasileiro de gestão do processo de projeto na construção de edifícios
Florianopolis : UFSC.
Oliveira, O. J. and Melhado, S. B..
2005.
« Modelo de gestão para pequenas empresas de projeto de edifícios ».
In Sistema de avaliação de desempenho para projetos e empresas de projeto
Florianopolis : UFSC.
Oliveira, O. J. and Melhado, S. B..
2005.
« Organização e gestão de empresas de projeto ».
In
Coordenação de projetos de edificações.
pp. 87-102. São Paulo : O Nome da Rosa.
Oliveira, O. J., Silvia, E. B. and Melhado, S. B..
2005.
« Requisitos de projeto em retrofit de fachadas ».
In Anais do V Workshop brasileiro de gestão do processo de projeto na construção de edifícios
Florianopolis : UFSC.
Oliveira, Otávio José de and Melhado, Silvio Burrattino.
2005.
« Modelo de gestão para pequenas empresas de projeto de edifícios ».
Boletim Técnico da Escola Politécnica da USP : Departamento de Engenharia de Construçao Civil, vol. BT/PCC/416.
pp. 1-17.
Souza, A. L. R., Aquino, J. P. R., Franco, L. S., Fabricio, M. M., Peña, M. D. and Melhado, S. B..
2005.
« Integração concepção - Projeto - Execução de obras ».
In
Coordenação de projetos de edificações.
pp. 51-67. São Paulo : O Nome da Rosa.
Souza, A. L. R., Grilo, L. M., Mesquita, M. J. M. and Melhado, S. B..
2005.
« O processo de projeto e sua gestão ».
In
Coordenação de projetos de edificações.
pp. 27-48. São Paulo : O Nome da Rosa.
Vosgueritchian, Andrea Bazarian and Melhado, Sílvio Burrattino.
2005.
« Gestão de projetos de arquitetura considerando aspectos de sustentabilidade ».
In Anais do IV Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) e I Encontro Latino Americano de Gestão e Economia da Construção (ELAGEC) (Porto Alegre, Brazil, Oct. 24-26, 2005)
Porto Alegre : ANTAC. Moha, Naouel
Moha, Naouel, Qing, Li, Gaffar, Ashraf and Seffah, Ahmed.
2005.
« Enquête sur les pratiques de tests d'utilisabilité ».
In IHM'05: Proceedings of the 17th International Conference on Francophone sur l'Interaction Homme-Machine (Toulouse, France, Sept. 27-30, 2005)
Coll. « ACM International Conference Proceeding Series », vol. 264.
pp. 115-122.
ACM. Monette, FrédéricMonette, Frédéric. 2005. « Réacteur à biofilm avec lit en mouvement (RBLM), essai pilote de traitement de l’effluent du 1er étang de la station d’épuration de Sainte-Julie ». Communication lors de la conférence : Americana,Salon des Technologies Environnementales des Amériques (Montréal, QC, Canada, 6-8 avril 2005). Lasfar, S., Duguay, J., Monette, Frédéric and Bergeron, J.-F.. 2005. « Valorisation des étangs aérés par la mise en culture des lentilles d'eau : bilan général et application. ». Communication lors de la conférence : 28e Symposium sur les Eaux Usées et 17e Atelier sur l’Eau Potable (Sherbrooke, QC, Canada, Oct. 2005). Morency, François
Morency, François, Wang, H., Habashi, W.G., Nadarajah, S., Pueyo, A. and Kafyeke, F..
2005.
« Thermal validation of FENSAP-ICE anti-icing procedure ».
In 11th Aerodynamics Symposium, Canadian Aeronautics and Space Institute (Toronto, ON, Canada, Apr. 26-27, 2005)
Moustapha, Hany
Andronenko, Sergey, Stiharu, Ion, Packirisamy, Muthukuruman, Moustapha, Hany and Dionne, Patrice.
2005.
« The use of microelectromechanical systems for surge detection in gas turbine engines ».
In Proceedings - 2005 International Conference on MEMS, NANO and Smart Systems (ICMENS) (Banff, AB, Canada, July 24-27, 2006)
pp. 355-358.
Institute of Electrical and Electronics Engineers Computer Society.
Benner, M. W., Sjolander, S. A. and Moustapha, S. H..
2005.
« An empirical prediction method for secondary losses in turbines: Part I - A new loss breakdown scheme and penetration depth correlation ».
In ASME Turbo Expo 2005: Power for Land, Sea, and Air (Reno, NV, USA, June 06-09, 2005)
Coll. « Proceedings of the ASME Turbo Expo »
pp. 625-635.
ASME.
Benner, M. W., Sjolander, S. A. and Moustapha, S. H..
2005.
« An empirical prediction method for secondary losses in turbines: Part II - A new secondary loss correlation ».
In ASME Turbo Expo 2005: Power for Land, Sea, and Air (Reno, NV, USA, June 06-09, 2005)
Coll. « Proceedings of the ASME Turbo Expo »
pp. 637-649.
ASME. Nabki, Frédéric
Siu, C., Kasnavi, S., Iniewski, Krzysztof, Nabki, Frederic, El-Gamal, Mourad, Townsend, K. and Haslett, J..
2005.
« RF CMOS circuits for ad-hoc networks and wearable computing ».
In 8th Euromicro Conference on Digital System Design (DSD'05) (Porto, Portugal, Aug. 30-Sept. 3, 2005)
pp. 153-160.
Institute of Electrical and Electronics Engineers Computer Society. Nadeau, Sylvie
Julien, B., Nadeau, Sylvie, Voyer, N. and Roy, Claude.
2005.
« The use of logic trees to evaluate corporate performance in ergonomics, health and safety ».
In Contemporary Ergonomics 2005 (Hatfield, United Kingdom, Apr. 5-7, 2005)
pp. 318-321.
UK : Taylor & Francis.
Nadeau, Sylvie.
2005.
« Can ergonomics (and investments in health and safety) be useful in sustaining a competitive advantage? ».
In Contemporary Ergonomics 2005 (Hertfordshire, United Kingdom, Apr. 5-7, 2005)
Coll. « Contemporary Ergonomics 2005 »
pp. 313-317.
UK : Taylor & Francis.
Alexandru, P. and Nadeau, Sylvie.
2005.
« Intégration des aspects de santé et de sécurité à la gestion des opérations dans le travail autonome et polyvalent en environnement incertain ».
In La SST: de la pratique à l'intégration-- un défi! : 27e congrès AQHSST, 17, 18, 19 mai 2005, Hôtel des Seigneurs, Saint-Hyacinthe : résumés des conférences (Saint-Hyacinthe, QC, Canada, 17-19 mai, 2005)
Association québécoise pour l'hygiène, la santé et la sécurité du travail.
Arteau, Jean, Nadeau, Sylvie, Ngô, Anh Dung and Rivet, Pierre.
2005.
« La santé et la sécurité du travail en milieu universitaire: des choix proactifs ».
In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005)
Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.
Charlot, E., Kenné, Jean-Pierre and Nadeau, Sylvie.
2005.
« Optimal production and lockout/tagout control policies in manufacturing systems ».
In 4th International Conference Safety of Industrial Automated Systems (SIAS) (Chicago, IL, USA, Sept. 26-28, 2005)
Nerguizian, Vahé
Belkhous, Salim, Azzouz, Adel, Saad, Maarouf, Nerguizian, Chahé and Nerguizian, Vahé.
2005.
« A novel approach for mobile robot navigation with dynamic obstacles avoidance ».
Journal of Intelligent & Robotic Systems, vol. 44, nº 3.
pp. 187-201.
Li, Huijun, Stiharu, Ion, Muthukumaran, Packirisamy and Nerguizian, Vahé.
2005.
« Micro-optical thermally actuated platform in MUMPS technology ».
WSEAS Transactions on Circuits and Systems, vol. 4, nº 5.
pp. 490-494.
Nerguizian, Vahé and Nerguizian, Chahé.
2005.
« Transmission zeros redundancy determination during the design of ladder passive RF filters ».
WSEAS Transactions on Communications, vol. 4, nº 10.
pp. 1122-1127.
Nerguizian, Vahé, Rafaf, Mustapha and Nerguizian, Chahé.
2005.
« Electric and electronic circuit analysis with Millman theorem ».
WSEAS Transactions on Electronics, vol. 2, nº 4.
pp. 166-169.
Nerguizian, Vahé, Rafaf, Mustapha, Dessaint, Louis-A., Packirisamy, Muthukumaran and Stiharu, Ion.
2005.
« MEMS magnetic linear motor for micro applications ».
WSEAS Transactions on Circuits and Systems, vol. 4, nº 4.
pp. 267-273.
Saad, Maarouf, Latombe, G., Suen, K. and Nerguizian, Vahé.
2005.
« Mobile robot path generation using fuzzy radial basis functions neural networks ».
WSEAS Transactions on Circuits and Systems, vol. 4, nº 4.
pp. 248-256.
Le Boudec, Brice, Saad, Maarouf and Nerguizian, Vahé.
2005.
« Adaptive control of redundant robots ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Nerguizian, Vahé and Rafaf, Mustapha.
2005.
« General purpose dedicated software for MEMS applications ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Pendyala, Srinivasa R., Packirisamy, Muthukumaran, Stiharu, Ion, Sivakumar, Narayanswamy and Nerguizian, Vahé.
2005.
« Modeling of electrostatically actuated cylindrical-waveguide-based optical microsystem ».
In MOEMS and Miniaturized Systems V (San Jose, CA, USA, Jan. 25-26, 2005)
Coll. « Proceedings of SPIE », vol. 5719.
pp. 30-37.
USA : SPIE.
Chatrathi, Kiran Kumar, Packirisamy, Muthukumaran, Stiharu, Ion and Nerguizian, Vahé.
2005.
« PVDF actuated cylindrical waveguide based optical attenuation ».
In MOEMS and Miniaturized Systems V (San Jose, CA, USA, Jan. 25-26, 2005)
Coll. « Proceedings of SPIE », vol. 5719.
pp. 38-47.
USA : SPIE.
Nerguizian, Vahé, Rafaf, Mustapha, Packirisamy, Muthukumaran and Stiharu, Ion.
2005.
« A novel magnetic optical detector for health monitoring ».
In 9th International Conference on the Commercialization of Nano and Micro Systems (COMS) (Baden-Baden, Germany, Aug. 21-25, 2005)
Nerguizian, Vahé, Rafaf, Mustapha and Nerguizian, Chahé.
2005.
« Electric and electronic circuit analysis with millman theorem ».
In Proceedings of the 9th International Conference on Circuits, Systems, Communications, Computers and Control (CSCC) (Athens, Greece, July 11-16, 2005)
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society.
Nerguizian, Vahé, Rafaf, Mustapha, Dessaint, Louis-A., Saad, Maarouf, Packirisamy, Muthukumaran and Stiharu, Ion.
2005.
« MEMS controlled linear motor ».
In 9th International Conference on the Commercialization of Micro and Nano Systems (COMS) (Baden-Baden, Germany, Aug. 21-25, 2005)
Nerguizian, Vahé, Rafaf, Mustapha, Dessaint, Louis-A., Packirisamy, Muthukumaran and Stiharu, Ion.
2005.
« Design and characterization of a novel MEMS linear motor ».
In Proceedings of the 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO) (Rio de Janeiro, Brazil, Apr. 25-27, 2005)
pp. 182-187.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society.
Nerguizian, Vahé and Nerguizian, Chahé.
2005.
« Transmission zeros redundancy determination during the design of ladder passive RF filters ».
In ICCOM'05 Proceedings of the 9th WSEAS International Conference on Communications (Athens, Greece, July 11-16, 2005)
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society.
Li, Huijun, Stiharu, Ion, Packirisamy, Muthukumaran and Nerguizian, Vahé.
2005.
« Micro-optical thermally actuated platform in MUMPS technology ».
In 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO) (Rio de Janeiro, Brazil, Apr. 25-27, 2005)
Domingue, Frédéric, Richard, Charles and Nerguizian, Vahé.
2005.
« A compact size 10 to 15 GHz MEMS coupler suitable for microwave applications ».
In Proceedings of the 1st International Workshop on Wireless Communications in Underground and Confined Area (IWWCUCA) (Val d'Or, QC, Canada, June 6-7, 2005)
Université du Québec en Abitibi-Témiscamingue.
Nerguizian, Chahé, Hamza, Lamia, Nerguizian, Vahé and Saad, Maarouf.
2005.
« 3D indoor geolocation with received signal strength fingerprinting technique and neural networks ».
In 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO) (Rio de Janeiro, Brazil, Apr. 25-27, 2005)
pp. 198-203.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society.
Saad, Maarouf, Latombe, Guillaume, Suen, Karnon and Nerguizian, Vahé.
2005.
« Mobile robot path generation using fuzzy radial basis function neural netowrks ».
In 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO) (Rio de Janeiro, Brazil, Apr. 25-27, 2005)
pp. 173-181.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society. Nguyen-Tri, Phuong
Le, Xuan Hien, Nguyen Thi, Viet Trieu, Pham, Thi Hong, Nguyen, Thien Vuong, Nguyen-Tri, Phuong and Vu, Minh Hoang.
2005.
« The influence of phenolformaldehyde resin and some filler on the thermal properties of the tung oil modified epoxy resin ».
Vietnam Journal of Science and Technology, vol. 43, nº 2B.
pp. 125-130.
Nguyen Thi, Viet Trieu, Le, Xuan Hien, Nguyen-Tri, Phuong, Vu, Minh Hoang and Dang, Ngoc Son.
2005.
« The influence of the active diluents on the photocrosslinking of butadiene nitrile rubber upon the exposure to sunlight ».
Vietnam Journal of Chemistry, vol. 43, nº 6.
pp. 674-678.
Nguyen Thi, Viet Trieu, Le, Xuan Hien, Nguyen-Tri, Phuong, Vu, Minh Hoang, Thai, Doan Tinh and Doan, Thi Hoa.
2005.
« The influence of the photoinitiators on the photocrosslinking of the diacrylat-alkyd system ».
Vietnam Journal of Chemistry, vol. 43, nº 5.
pp. 530-534.
Nguyen Thi, Viet Trieu, Nguyen-Tri, Phuong, Vu, Minh Hoang and Le, Xuan Hien.
2005.
« The influence of the acylphosphine oxyde photoinitiators on the photocrosslinking of the butadiene nitrile/trithiol system upon the exposure to sunlight ».
Vietnam Journal of Science and Technology, vol. 43, nº 2B.
pp. 148-152.
Nguyen Thi, Viet Trieu, Nguyen-Tri, Phuong, Vu, Minh Hoang and Le, Xuan Hien.
2005.
« The influence of the film thickness on the photocrosslinking process of butadiene nitrile/thiol system upon the exposure to sunlight ».
Vietnam Journal of Science and Technology, vol. 43, nº 2B.
pp. 153-158.
Nguyen Thi, Viet Trieu, Nguyen-Tri, Phuong, Vu, Minh Hoang, Vu, Ngoc Hai and Le, Xuan Hien.
2005.
« The influence of the content of alkyd resin on the photocrosslinking of the hecxanediol diacrylate-alkyd system ».
Vietnam Journal of Science and Technology, vol. 43, nº 2B.
pp. 143-147.
Studer, Katia, Nguyen-Tri, Phuong, Decker, Christian, Beck, Erich and Schwalm, Reinhold.
2005.
« Redox and photoinitiated crosslinking polymerization III. Clear and pigmented acrylic coatings ».
Progress in Organic Coatings, vol. 54, nº 3.
pp. 230-239. Ngô, Anh Dung
Sekouri, E.M., Hu, Y.R. and Ngô, Anh Dung.
2005.
« Strain-based shape estimation for annular plates ».
In ASME International Mechanical Engineering Congress and Exposition (IMECE) (Orlando, FL, USA, Nov. 5-11, 2005)
Coll. « ASME Conference Proceedings »
pp. 369-374.
New York, NY, USA : American Society of Mechanical Engineers.
Arteau, Jean, Nadeau, Sylvie, Ngô, Anh Dung and Rivet, Pierre.
2005.
« La santé et la sécurité du travail en milieu universitaire: des choix proactifs ».
In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005)
Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.
Ho, T.N. and Ngô, Anh Dung.
2005.
« Influence of temperature and humidity on the tensile strength and stiffness of hemp and coir fibers ».
In 5th Canadian International Composites Conference (Vancouver, BC, Canada, Aug. 16-19, 2005)
CACSMA.
Ho, T.N. and Ngô, Anh Dung.
2005.
« Sorption of water in hemp and coir fibers ».
In 8th International Conference on Woodfiber-Plastic Composites (and other natural fibers) (Madison, WI, USA, May 23-25, 2005)
Nikiema, Josiane
Nikiema, J., Bibeau, L., Lavoie, J., Brzezinski, R., Vigneux, J. and Heitz, M..
2005.
« Biofiltration of methane: An experimental study ».
Chemical Engineering Journal, vol. 113, nº 2-3.
pp. 111-117. Nollet, Marie-José
Nollet, Marie-José, Chaallal, Omar and Lefebvre, Karine.
2005.
« Seismic vulnerability study of historical buildings in Old Montreal : overview and perspectives ».
In Structural studies, repairs, and maintenance of heritage architecture IX (Malta, June 22-24, 2005)
Coll. « WIT transactions on the built environment », vol. 83.
Southampton, UK : WIT PRESS. Noumeir, Rita
Noumeir, Rita.
2005.
« Benefits of DICOM modality performed procedure step ».
Journal of Digital Imaging, vol. 18, nº 4.
pp. 260-269.
Piccand, Sébastien, Noumeir, Rita and Paquette, Eric.
2005.
« Efficient visualization of volume data sets with region of interest and wavelets ».
In Medical Imaging 2005: Visualization, Image-Guided Procedures, and Display (San Diego, CA, USA, Feb. 13-15, 2005)
Coll. « Proceedings of SPIE », vol. 5744.
pp. 462-470.
USA : SPIE.
Noumeir, Rita, Lemay, Alain and Lina, Jean-Marc.
2005.
« Pseudonymisation of radiology data for research purposes ».
In Medical Imaging - PACS and Imaging Informatics (San Diego, CA, USA, Feb. 15-17, 2005)
Coll. « Proceedings of SPIE », vol. 5748.
pp. 298-305.
USA : SPIE.
Noumeir, Rita and Chafik, Adil.
2005.
« Access control and confidentiality in radiology ».
In Medical Imaging 2005: PACS and Imaging Informatics (San Diego, CA, USA, Feb. 15-17, 2005)
Coll. « Proceedings of SPIE », vol. 5748.
pp. 340-347.
USA : SPIE. Noumeir, Rita and Channin, David. 2005. « IHE, vers une réelle interopérabilité ». Communication lors de la conférence : Informatique Santé (Montréal, QC, Canada, 20 sept. 2005). Noumeir, Rita. 2005. « Conformance of IHE Integration Profiles ». Communication lors de la conférence : Symposium Partnership for health information standards : Conform to the Norm (Victoria, BC, Canada, Nov. 15-17, 2005). Noumeir, Rita. 2005. « What is new in IHE, the scientific assembly and annual meeting ». Communication lors de la conférence : The Radiological Society of North America (RSNA) (Montreal, QC, Canada, Dec. 20, 2005). Noumeir, Rita. 2005. « Cross-enterprise document sharing for imaging ». Communication lors de la conférence : Integrating the Healthcare Enterprise (IHE) Radiology Workshop (Montreal, QC, Canada, June 20, 2005). Noumeir, Rita. 2005. « Introduction aux profils d'intégration IHE : radiologie, laboratoire et cardiologie ». Communication lors de la conférence : Standards and Healthcare Information Systems Interoperability Forum (Montreal, QC, Canada, Feb., 2005).
Noumeir, Rita.
2005.
« Achieving real interoperability with integrating the healthcare enterprise process ».
In International Hospital Information Technology Forum and Chinese Hospital Information Network Conference (Beijing, China, July 3-5, 2005)
pp. 223-231.
Nuño, Natalia
Mandrala, Agnieszka and Nuño, Natalia.
2005.
« Effect of curing conditions on the residual stresses generated during bone cement polymerisation ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005)
pp. 82-86.
Montréal, Qué., Canada : École de technologie supérieure. Levasseur, A., Tétreault, P., de Guise, Jacques A., Nuño, Natalia and Hagemeister, Nicola. 2005. « Estimation du centre de rotation de l'articulation glénohumérale ». Affiche présentée lors de la conférence : 8e Congrès des Étudiants du CRCHUM (Montréal, Canada, 20 déc. 2005). Levasseur, A., Hagemeister, Nicola, Tétreault, P., Nuño, Natalia and de Guise, Jacques A.. 2005. « Évaluation de la cinématique tridimensionnelle (3D) de l'articulation scapulo-humérale dans le but de concevoir et d'évaluer une nouvelle prothèse humérale : résultats préliminaires ». Affiche présentée lors de la conférence : Association Canadienne Orthopédique (ACO) (Montréal, QC, Canada, 3-5 juin 2005). Barré, A., Aissaoui, Rachid and Nuño, Natalia. 2005. « Estimation of knee contact forces during gait ». Affiche présentée lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, May 6, 2005). Vasquez, P. and Nuño, Natalia. 2005. « Effect of residual stresses due to cement curing in cemented hip implants : a numerical study ». Communication lors de la conférence : 3rd International Symposium on Advenced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Plamondon, D. and Nuño, Natalia. 2005. « Polymerization of PMMA of an idealized hip implant : experimental results ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Plamondon, D. and Nuño, Natalia. 2005. « Stem-PMMA interface in cemented hip implant : experimental measurement of PMMA residual stresses during polymerization ». Communication lors de la conférence : 7th International Conference on Mesomechanics (MESO) (Montreal, QC, Canada, Aug. 1-4, 2005). Madrala, A. and Nuño, Natalia. 2005. « Experimental study on the polymerization of bone cement : effect of curing conditions ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Madrala, A. and Nuño, Natalia. 2005. « Effect of curing on the residual stresses generated during bone cement polymerisation ». Communication lors de la conférence : 7th International Conference on Mesomechanics (MESO) (Montreal, QC, Canada, Aug. 1-4, 2005). Levasseur, A., Hagemeister, Nicola, Tétreault, P., Nuño, Natalia and de Guise, Jacques A.. 2005. « Three-dimensional (3D) evaluation of the glenohumeral joint kinematics : preliminary results ». Communication lors de la conférence : Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, May 6, 2005). Barré, A., Aissaoui, Rachid, Nuño, Natalia and de Guise, Jacques A.. 2005. « Estimation des forces de contact fémoro-tibiales lors de la marche ». Communication lors de la conférence : 8e Congrès des Étudiants du CRCHUM (Montréal, QC, Canada, 20 déc. 2005).
Nuno, Natalia and Plamondon, Dominic.
2005.
« Measurements of the residual stresses due to cement polymerization for cemented hip implants ».
In Residual Stresses VII, ICRS7 (Xian, China, June 14-17, 2004)
Coll. « Materials Science Forum », vol. 490-491.
pp. 571-576.
Switzerland : Trans Tech Publications Ltd. Levasseur, A., Hagemeister, Nicola, Tétreault, P., Nuño, Natalia and de Guise, Jacques A.. 2005. « Effect of freezing and thawing in shoulder kinematics analysis ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005).
Plamondon, Dominic and Nuño, Natalia.
2005.
« Development of an experimental setup to measure PMMA residual stresses during polymerisation of a cemented ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005)
pp. 435-441.
Montréal, Qué., Canada : École de technologie supérieure. Paquet, Marc
Ramudhin, Amar, Paquet, Marc, Artiba, Abdelhakim, Varvaro, D., Thomson, V., Dupré, P. and Dumouchel, M..
2005.
« Maintenance, repair and overhaul activities in aeronautic industry : a framework to support the design and deployment of a new control strategy using radio frequency identification technology ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Marrakech, Morocco, May 16-19, 2005)
pp. 1261-1270.
Paquette, Eric
Paquette, Eric.
2005.
« Computer graphics education in different curricula: analysis and proposal for courses ».
Computers and Graphics, vol. 29, nº 2.
pp. 245-255.
St-Amour, Jean-François, Paquette, Eric, Poulin, Pierre and Beaudoin, Philippe.
2005.
« Real - time soft shadows using the PDSM technique ».
In
Shader X4 : advanced rendering techniques.
pp. 299-311. Florence, KY, USA : Charles River Media.
Piccand, Sébastien, Noumeir, Rita and Paquette, Eric.
2005.
« Efficient visualization of volume data sets with region of interest and wavelets ».
In Medical Imaging 2005: Visualization, Image-Guided Procedures, and Display (San Diego, CA, USA, Feb. 13-15, 2005)
Coll. « Proceedings of SPIE », vol. 5744.
pp. 462-470.
USA : SPIE.
St-Amour, Jean-François, Paquette, Eric and Poulin, Pierre.
2005.
« Soft shadows from extended light sources with penumbra deep shadow maps ».
In Proceedings of Graphics Interface 2005 (Victoria, BC, Canada, May 9-11, 2005)
pp. 105-112.
Canadian Human-Computer Communications Society. Perraton, Daniel
Carter, Alan and Perraton, Daniel.
2005.
« In-situ permeability of the outermost layer of asphalt and cement concrete road materials water permeability evaluated with gas flow ».
Road Materials and Pavement Design, vol. 6, nº 2.
pp. 239-253.
Meunier, Mathieu and Perraton, Daniel.
2005.
« Détermination d'un Ndesign pour les enrobés à matrice de pierres (SMA) ».
In Proceedings of the Fiftieth Annual Conference of the Canadian Technical Asphalt Association Conference (CTAA), Victoria, British Columbia, November, 2005 (Victoria, BC, Canada, Nov. 6-9, 2005)
Coll. « Proceedings of the ... annual Conference of Canadian Technical Asphalt Association », vol. 50.
pp. 237-252.
Laval, QC, Canada : Polyscience publication. Petit, YvanPetit, Yvan and Bryant, Tim. 2005. « Orthopaedic bearing : past, present and future ». Communication lors de la conférence : Séminaire du Laboratoire de Recherche en Imagerie et Orthopédie (LIO) (Kingston, ON, Canada, Jan. 7, 2005). Pham, Tan
Pham, Xuan-Tan, Bates, Phil and Chesney, Amy.
2005.
« Modeling of thermoforming of low-density glass mat thermoplastic ».
Journal of Reinforced Plastics and Composites, vol. 24, nº 3.
pp. 287-298. Ramudhin, AmarRamudhin, Amar. 2005. « It in healthcare : a framework for implementation of the essential elements for chronic disease management ». Communication lors de la conférence : SAP Curriculum Congress '05 (Atlanta, GA, USA, Mar., 2005).
Ramudhin, Amar, Paquet, Marc, Artiba, Abdelhakim, Varvaro, D., Thomson, V., Dupré, P. and Dumouchel, M..
2005.
« Maintenance, repair and overhaul activities in aeronautic industry : a framework to support the design and deployment of a new control strategy using radio frequency identification technology ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Marrakech, Morocco, May 16-19, 2005)
pp. 1261-1270.
Rioux, Michel
Lepage, Richard, Ben Azouz, Z. and Rioux, Michel.
2005.
« Analyse de la variation de la forme en anthropométrie 3D ».
In Actes des 4e Ateliers sur Traitement et Analyse de l'Information : Méthodes et Applications (TAIMA) (Hammamet, Tunisie, 26 sept.-1 oct. 2005)
pp. 471-478.
Rivard, Hugues
Rivard, Hugues, Wang, Weimin and Zmeureanu, Radu.
2005.
« Applying multi-objective genetic algorithms in green building design optimization ».
Building and Environment, vol. 40, nº 11.
pp. 1512-1525.
Rivard, Hugues, Yang, Jin and Zmeureanu, Radu.
2005.
« On-Line buildings energy prediction using adaptive artificial neural networks ».
Energy and Buildings, vol. 37, nº 12.
pp. 1250-1259.
Rivard, Hugues, Mora, Rodrigo and Bédard, Claude.
2005.
« From architectural sketch to feasible structural system solution ».
In ASCE International Conference on Computing in Civil Engineering (Cancun, Mexico, Jul. 12-15, 2005)
pp. 191-202.
Reston, VA, USA : American Society of Civil Engineers.
Rivard, Hugues, Wang, Weimin and Zmeureanu, Radu.
2005.
« A framework for simulation-based optimization with application to green building design ».
In ASCE International Conference on Computing in Civil Engineering (Cancun, Mexico, Jul. 12-15, 2005)
pp. 203-210.
Reston, VA, USA : American Society of Civil Engineers.
Rivard, Hugues, Wang, Weimin and Zmeureanu, Radu.
2005.
« Two phase application of multi-objective genetic algorithms in green building design ».
In 9th International IBPSA Conference (Montreal, Canada, Aug. 15-18, 2005)
pp. 1323-1330.
International Building Performance Simulation Association.
Yang, Jin, Rivard, Hugues and Zmeureanu, Radu.
2005.
« Building energy prediction with adaptive artificial neural networks ».
In IBPSA 2005 - International Building Performance Simulation Association 2005 (Montreal, QC, Canada, Aug. 15-18, 2005)
pp. 1401-1408.
USA : International Building Performance Simulation Association.
Weimin, Wang, Rivard, Hugues and Zmeureanu, Radu.
2005.
« An object-oriented framework for simulation-based green building design optimization with genetic algorithms ».
Advanced Engineering Informatics, vol. 19, nº 1.
pp. 5-23.
Rivard, Hugues, Meniru, Kene and Bédard, Claude.
2005.
« Early building design : capturing decisions for better interoperability ».
In 22nd Conference on Information Technology in Construction (Dresden, Germany, July 19-21, 2005)
pp. 385-391.
Germany : Institute for Construction Informatics.
Woodbury, Rob, Côté, Pierre, Harrop, Patrick, Rivard, Hugues, Salustri, Filippo A. and Seebohm, Thomas.
2005.
« Beyond engineering design : what are the natural boundaries of design education and research for Canadian universities? ».
In 2nd CDEN International Conference on Design Education, Innovation, and Practice (AB, Canada, July 18-20, 2005)
Rivest, LouisTremblay, T.G., Rivest, Louis, Lamarche, Bruno and Maranzana, Roland. 2005. « Vers une application généralisée du concept de lien technologique en développement de produits : Terminologie des associations ». Communication lors de la conférence : 24e Salon International des Systèmes d'Information, Technologies, Méthodologies et Services pour la Conception, la Fabrication et la Gestion du Cycle de vie Produit (MICAD) (Paris, France, 5-7 avril 2005). Msaaf, O. and Rivest, Louis. 2005. « Le courtage de données numériques structurées : un catalyseur pour l'optimisation multidisciplinaire ». Communication lors de la conférence : 2e Journée MOSAIC (Montréal, QC, Canada, 9 sept. 2005). Robert, Jean-Marc
Barbeau, Michel and Robert, Jean-Marc.
2005.
« Perfect identity concealment in UMTS over radio access links ».
In IEEE International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob'2005) (Montreal, QC, Canada, Aug. 22-24, 2005)
pp. 72-77.
IEEE. Rousse, Daniel R.Rousse, Daniel R.. 2005. « Frequency and time-based methods for transient radiative transfer ». Communication lors de la conférence : Numerical Heat Transfer 2005 EUROTHERM Seminar 82 (Cracovie, Pologne, Sept 13-16, 2005).
Ben Salah, M., Askri, F., Rousse, Daniel R. and Ben Nasrallah, S..
2005.
« Control volume finite element method for radiation ».
Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 92, nº 1.
pp. 9-30.
Francoeur, Mathieu, Vaillon, R. and Rousse, Daniel R..
2005.
« Theoretical analysis of frequency and time-domain methods for optical characterization of absorbing and scattering media ».
Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 93, nº 1–3.
pp. 139-150.
Francoeur, M. and Rousse, Daniel R..
2005.
« Frequency and time-based methods for transient radiative transfer ».
In Eurotherm Seminar 82 : numerical heat transfer 2005, September 13-16, Gliwice-Cracow, Poland (Gliwice-Cracow, Poland, Sept. 13-16, 2005)
pp. 43-54.
Gliwice-Cracow, Poland : Institute of Thermal Technology, Silesian University of Technology.
Francoeur, M. and Rousse, Daniel R..
2005.
« Numerical solutions of transient radiative transfer using time and frequency-domain approaches ».
In Proceedings of the ASME Summer Heat Transfer Conference--2005 : presented at 2005 ASME Summer Heat Transfer Conference : July 17-22, 2005, San Francisco, California, USA (San Francisco, CA, USA, July 17-22, 2005)
Coll. « Heat Transfer », vol. 4.
pp. 257-265.
New York, NY, USA : American Society of Mechanical Engineers.
Francoeur, M. and Rousse, Daniel R..
2005.
« Transfert radiatif instationnaire en milieu semi-transparent. partie A: résolution dans le domaine temporel ».
In VIIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes: CIFQ2005 (Saint-Malo, France, 23-25 mai 2005)
Rennes, France : Université de Rennes I.
Francoeur, M. and Rousse, Daniel R..
2005.
« Transfert radiatif instationnaire en milieu semi-transparent. partie B: résolution dans le domaine fréquentiel ».
In VIIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes: CIFQ2005 (Saint-Malo, France, 23-25 mai 2005)
Rennes, France : Université de Rennes I.
Rousse, Daniel R..
2005.
« Rayonnement thermique: 1- Une brève histoire des origines à 1900 ».
In Journées Internationales Scientifiques et Pédagogiques de Mécanique et d’Energétique, JISPME’05 (Tozeur, Tunisie, 1-3 déc. 2005)
pp. 1-15.
Rousse, Daniel R..
2005.
« Rayonnement thermique: 2- Une méthode numérique versatile ».
In Journées Internationales Scientifiques et Pédagogiques de Mécanique et d’Energétique, JISPME’05 (Tozeur, Tunisie, 1-3 déc. 2005)
pp. 16-28.
Rousse, Daniel R. and Francoeur, M..
2005.
« Rayonnement thermique: 5- Rayonnement instationnaire - solution temporelle ».
In Journées Internationales Scientifiques et Pédagogiques de Mécanique et d’Energétique, JISPME’05 (Tozeur, Tunisie, 1-3 déc. 2005)
pp. 52-62.
Rousse, Daniel R. and Francoeur, M..
2005.
« Rayonnement thermique: 6- Rayonnement instationnaire - solution fréquentielle ».
In Journées Internationales Scientifiques et Pédagogiques de Mécanique et d’Energétique, JISPME’05 (Tozeur, Tunisie, 1-3 déc. 2005)
pp. 63-71.
Rousse, Daniel R. and Gautier, G..
2005.
« Rayonnement thermique: 3- Un schéma numérique précis et efficace ».
In Journées Internationales Scientifiques et Pédagogiques de Mécanique et d’Energétique, JISPME’05 (Tozeur, Tunisie, 1-3 déc. 2005)
pp. 29-38.
Rousse, Daniel R. and Proulx, C..
2005.
« Rayonnement thermique: 4- Rayonnement collimaté à une frontière ».
In Journées Internationales Scientifiques et Pédagogiques de Mécanique et d’Energétique, JISPME’05 (Tozeur, Tunisie, 1-3 déc. 2005)
pp. 39-51.
Rousse, Daniel R.. 2005. « A series of six seminars on radiative transfer in participating media ». Communication lors de la conférence : ENSIM (École nationale supérieure d’ingénieurs du Mans) seminars (Tozeur, Tunisie, Déc. 2005). Saad, Maarouf
Belkhous, Salim, Azzouz, Adel, Saad, Maarouf, Nerguizian, Chahé and Nerguizian, Vahé.
2005.
« A novel approach for mobile robot navigation with dynamic obstacles avoidance ».
Journal of Intelligent & Robotic Systems, vol. 44, nº 3.
pp. 187-201.
Saad, Maarouf, Latombe, G., Suen, K. and Nerguizian, Vahé.
2005.
« Mobile robot path generation using fuzzy radial basis functions neural networks ».
WSEAS Transactions on Circuits and Systems, vol. 4, nº 4.
pp. 248-256.
Kadissi, C., Kenné, Jean-Pierre and Saad, Maarouf.
2005.
« Drive by wire control of an electro-hydraulic active suspension, a backstepping approach ».
In IEEE Conference on Control Applications (CCA) (Toronto, Canada, Aug. 28-31, 2005)
pp. 1581-1587.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Asber, Dalal, Lefebvre, Serge, Saad, Maarouf and Desbiens, Charles.
2005.
« Forecasting Distribution CLPU behaviour ».
In Proceedings of the Eighth IASTED International Conference on Power and Energy Systems (Marina del Rey, CA, USA, Oct. 24-26, 2005)
pp. 212-216.
Calgary, Canada : ACTA Press.
Fallaha, Charles, Kanaan, Hadi and Saad, Maarouf.
2005.
« Real time implementation of a sliding mode regulator for current-controlled magnetic levitation system ».
In IEEE International Symposium on Intelligent Control and Mediterranean Conference on Control and Automation (Limassol, Cyprus, June 27-29, 2005)
pp. 696-701.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Garcia, Sixto E., Saad, Maarouf and Akhrif, Ouassima.
2005.
« Detecting convergence in genetic algorithms with decreasing mutation policies ».
In Proceedings of the IASTED International Conference on Computational Intelligence (Calgary, Canada, Jul. 4-6, 2005)
pp. 369-374.
Anaheim, CA, USA : ACTA Press.
Le Boudec, Brice, Saad, Maarouf and Nerguizian, Vahé.
2005.
« Adaptive control of redundant robots ».
In Proceedings 8th international conference on modeling and simulation of electric machines, converters and systems : April 17-20 2005, Hammamet, Tunisia (Hammamet, Tunisia, April 17-20, 2005)
Montréal, Qué., Canada : École de technologie supérieure.
Melhem, K., Saad, Maarouf, Abou, S.C. and Boukas, E.K..
2005.
« On global output feedback tracking control of planar robot manipulators ».
In 44th IEEE Conference on Decision and Control and European Control Conference (CDC-ECC) (Seville, Spain, Dec.12-15, 2005)
pp. 5594-5599.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Nerguizian, Vahé, Rafaf, Mustapha, Dessaint, Louis-A., Saad, Maarouf, Packirisamy, Muthukumaran and Stiharu, Ion.
2005.
« MEMS controlled linear motor ».
In 9th International Conference on the Commercialization of Micro and Nano Systems (COMS) (Baden-Baden, Germany, Aug. 21-25, 2005)
Nerguizian, Chahé, Hamza, Lamia, Nerguizian, Vahé and Saad, Maarouf.
2005.
« 3D indoor geolocation with received signal strength fingerprinting technique and neural networks ».
In 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO) (Rio de Janeiro, Brazil, Apr. 25-27, 2005)
pp. 198-203.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society.
Saad, Maarouf, Latombe, Guillaume, Suen, Karnon and Nerguizian, Vahé.
2005.
« Mobile robot path generation using fuzzy radial basis function neural netowrks ».
In 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO) (Rio de Janeiro, Brazil, Apr. 25-27, 2005)
pp. 173-181.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society.
Cornieles, E., Saad, M. and Arteaga, F..
2005.
« Sliding mode controller for multivariable processes ».
In 5th International Conference on Control and Automation (ICCA'05) (Budapest , Hungary, June 27-29, 2005)
pp. 32-37.
IEEE. Sabourin, Robert
Justino, Edson J. R., Bortolozzi, Flavio and Sabourin, Robert.
2005.
« A comparison of SVM and HMM classifiers in the Off-Line signature verification ».
Pattern Recognition Letters, vol. 26, nº 9.
pp. 1377-1385.
Koerich, Alessandro L., Sabourin, Robert and Suen, Ching Y..
2005.
« Recognition and verification of unconstrained handwritten words ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 27, nº 10.
pp. 1509-1522.
Milgram, J., Sabourin, Robert and Cheriet, Mohamed.
2005.
« Système de classification à deux niveaux de décision combinant approche par modélisation et machines à vecteurs de support ».
Traitement du Signal, vol. 22, nº 3.
pp. 293-304.
Nassif, Nabil, Kajl, Stanislaw and Sabourin, Robert.
2005.
« Optimization of HVAC control system strategy using two-objective genetic algorithm ».
HVAC&R Research, vol. 11, nº 3.
pp. 459-486.
Nassif, Nabil, Kajl, Stanislaw and Sabourin, Robert.
2005.
« Ventilation control strategy using supply CO2 concentration setpoint ».
HVAC&R Research, vol. 11, nº 2.
pp. 239-262.
Nassif, Nabil, Kajl, Stanislaw and Sabourin, Robert.
2005.
« Simplified model-based optimal control of VAV air-conditioning system ».
In IBPSA 2005 - International Building Performance Simulation Association 2005 (Montreal, QC, Canada, Aug. 15-18, 2005)
pp. 823-830.
USA : International Building Performance Simulation Association.
Côté, Pascal, Wong, Tony and Sabourin, Robert.
2005.
« A hybrid multi-objective evolutionary algorithm for the uncapacitated exam proximity problem ».
In Practice and Theory of Automated Timetabling V : 5th International Conference, PATAT 2004, Pittsburgh, PA, USA, August 18-20, 2004, Revised Selected Papers (Pittsburgh, PA, USA, Aug. 18-20, 2004)
Coll. « Lecture Notes in Computer Science », vol. 3616.
pp. 294-312.
Berlin, Germany : Springer-Verlag.
Radtke, P., Wong, Tony and Sabourin, Robert.
2005.
« A multi-objective memetic algorithm for intelligent feature extraction ».
In Evolutionary Multi-Criterion Optimization Third International Conference, EMO 2005, Guanajuato, Mexico, March 9-11, 2005. Proceedings (Guanajuato, Mexico, March 9-11, 2005)
Coll. « Lecture Notes in Computer Science », vol. 3410.
pp. 767-781.
Berlin, Germany : Springer-Verlag.
Henniges, Philippe, Granger, Éric and Sabourin, Robert.
2005.
« Factors of overtraining with fuzzy ARTMAP neural networks ».
In IEEE International Joint Conference on Neural Networks (IJCNN) (Montreal, Canada, Jul. 31-Aug. 4, 2005)
pp. 1075-1080.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Milgram, J., Cheriet, Mohamed and Sabourin, Robert.
2005.
« Estimating accurate multi-class probabilities with support vector machines ».
In IEEE International Joint Conference on Neural Networks (IJCNN) (Montreal, Canada, Jul. 31-Aug. 4, 2005)
pp. 1906-1911.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Oliveira, L., Britto, A. and Sabourin, Robert.
2005.
« A synthetic database to assess segmentation algorithms ».
In 8th International Conference on Document Analysis and Recognition (ICDAR) (Seoul, South Korea, Aug. 29-Sept. 1, 2005)
pp. 207-211.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Oliveira, L., Britto, A. and Sabourin, Robert.
2005.
« Improving cascading classifiers with particle swarm optimization ».
In 8th International Conference on Document Analysis and Recognition (ICDAR) (Seoul, South Korea, Aug. 29-Sept. 1, 2005)
pp. 570-574.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Oliveira, Luiz, Britto, Alceu de Souza and Sabourin, Robert.
2005.
« Optimizing class-related thresholds with particle swarm optimization ».
In IEEE International Joint Conference on Neural Networks (IJCNN) (Montreal, Canada, Jul. 31-Aug. 4, 2005)
pp. 1511-1516.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Radtke, P.V.M., Sabourin, Robert and Wong, Tony.
2005.
« Intelligent feature extraction for ensemble of classifiers ».
In 8th International Conference on Document Analysis and Recognition (ICDAR) (Seoul, South Korea, Aug. 29-Sept. 1, 2005)
pp. 866-870.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Milgram, Jonathan, Sabourin, Robert and Cheriet, Mohamed.
2005.
« Combining model-based and discriminative approaches in a modular two-stage classification system : application to isolated handwritten digit recognition ».
Electronic Letters on Computer Vision and Image Analysis, vol. 5, nº 2.
pp. 1-15.
Oliveira, Luiz S., Morita, Marisa, Sabourin, Robert and Bortolozzi, Flavio.
2005.
« Multi-objective genetic algorithms to create ensemble of classifiers ».
In Evolutionary Multi-Criterion Optimization : Third International Conference, EMO 2005, Guanajuato, Mexico, March 9-11, 2005, Proceedings (Guanajuato, Mexico, March 9-11, 2005)
Coll. « Lecture Notes in Computer Science », vol. 3410.
pp. 592-606.
Berlin, Germany : Springer-Verlag.
Nassif, N., Kajl, Stanislaw and Sabourin, Robert.
2005.
« ASHRAE standard's 62 multiple spaces equation for design and control ».
In Proceedings from 10th International Conference on Indoor Air Quality and Climate (Beijing, China, Sept. 4-9, 2005)
International Society of Indoor Air Quality and Climate.
Nassif, N., Kajl, Stanislaw and Sabourin, Robert.
2005.
« Optimal operation of VAV air-conditioning system ».
In Air Conditioning, Protection & District Heating 2005 : XI International Conference, Wroclaw - Szklarska, 23-26 June 2005 (Wroclaw, Poland, June 23-26, 2005)
pp. 435-440.
Wroclaw : Edition PZITS.
Aires, Simone B. K., Freitas, Cinthia O. A., Bortolozzi, Flávio and Sabourin, Robert.
2005.
« Perceptual zoning for handwritten character recognition ».
In 12th Conference of the International Graphonomics Society (IGS) (Salerno, Italy, June 26-29, 2005)
pp. 178-182.
USA : International Graphonomics Society.
Oliveira, Luiz S., Justino, Edson, Freitas, Cinthia and Sabourin, Robert.
2005.
« The graphology applied to signature verification ».
In 12th Conference of the International Graphonomics Society (IGS) (Salerno, Italy, June 26-29, 2005)
pp. 286-290.
USA : International Graphonomics Society.
Morita, Marisa, Oliveira, Luiz S. and Sabourin, Robert.
2005.
« Geração Automática de Conjuntos de Classificadores Através da Seleção de Características não Supervisionada ».
IEEE Latin America Transactions, vol. 3, nº 5.
pp. 447-453. Samson, ClaireAristimuno, J. and Samson, C.. 2005. « Reprocessing coincident refraction and reflection data to constrain the Moho depth in the Slave Craton, Northwest Territories, Canada ». Affiche numéro S23B-0257 présentée lors de la conférence : Fall Meeting of the American Geophysical Union (San Francisco, CA, USA, Dec. 5-9, 2005). Draisey, S., Mullins, M., Holladay, S. and Samson, C.. 2005. « Martian transportation vehicle – ISRU ». Communication lors de la conférence : Planetary and Terrestrial Mining Sciences Symposium (Sudbury, ON, Canada, June 05-08, 2005).
Eaton, D. W., Adams, J., Asudeh, I., Atkinson, G. M., Bostock, M. G., Cassidy, J. F., Ferguson, I. J., Samson, C., Snyder, D. B., Tiampo, K. F. and Unsworth, M. J..
2005.
« Investigating Canada's Lithosphere and earthquake hazards with portable arrays ».
EOS, vol. 86, nº 17.
pp. 169-173. Fernberg, P. and Samson, C.. 2005. « GIS Mapping of electromagnetic noise sources for magnetotelluric survey planning ». Communication lors de la conférence : Annual Scientific Meeting of the Canadian Geophysical Union (Banff, AB, Canada, May 08-11, 2005). Fernberg, P., Samson, C. and Ferguson, I.. 2005. « An application of a magnetotelluric survey to investigate geoelectric field fluctuations and the Earth conductivity structure along a pipeline in the Arnprior-Ottawa area ». Communication lors de la conférence : Annual Scientific Meeting of the Canadian Geophysical Union (Banff, AB, Canada, May 08-11, 2005). Fernberg, P., Samson, C., Larocca, P. A. and Ferguson, I.. 2005. « Initial assessment of the geoelectric field fluctuations along a pipeline in the Arnprior-Ottawa area ». Communication lors de la conférence : POLARIS Ontario workshop (Kingston, ON, Canada, Jan. 06, 2005). Hefford, S., Smith, R. and Samson, C.. 2005. « The effects of transmitter-receiver geometry on the target detection capabilities of an airborne electromagnetic survey system ». Communication lors de la conférence : 7th Annual Scientific Conference of the GEOIDE Network (Quebec City, QC, Canada, May 29-31, 2005). Hefford, S., Smith, R.S. and Samson, C.. 2005. « Quantifying the effect that changes in the transmitter-receiver geometry have on the capabilities of an airborne electromagnetic survey system with a towed receiver to detect good conductors ». Communication lors de la conférence : Ontario Exploration and Geoscience Symposium (Toronto, ON, Canada, Dec. 13-14, 2005). Holladay, J. S., Samson, C., Lee, J., Draisey, S. and Lim, D.. 2005. « Electromagnetic induction sounder for the detection of near-surface liquid-phase water ». Communication lors de la conférence : 5th Canadian Space Exploration Workshop: the future of space exploration in Canada (Montreal, QC, Canada, May 12-13, 2005). Samson, C., Andrews, C., Snider, A., Narod, B., Markov, S. and Ferguson, I.. 2005. « Installing POLARIS magnetotelluric observatories in the Northwest Territories ». Communication lors de la conférence : Annual Scientific Meeting of the Canadian Geophysical Union (Banff, AB, Canada, May 08-11, 2005). Scrivens, S., Balch, S. and Samson, C.. 2005. « A comparison between fixed-wing and helicopter-borne concentric loop time-domain electromagnetic systems ». Communication lors de la conférence : Ontario Exploration and Geoscience Symposium (Toronto, ON, Canada, Dec. 13-14, 2005).
Smith, D. L., Ernst, R. E., Samson, C. and Herd, R..
2005.
« Magnetic susceptibility of stony meteorites: evaluation of anisotropy and frequency dependence ».
In Thirty-Sixth Lunar and Planetary Science Conference (Houston, TX, USA, Mar. 14-18, 2005)
Coll. « LPI Contribution », vol. 1234.
Lunar and Planetary Institute. Smith, D. L., Samson, C., Ernst, R. E., Herd, R., Christie, I., Sink, J.-E. and Deslauriers, A.. 2005. « Non-destructive physical characterization of meteorites ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Mar. 04, 2005).
Smith, D. L., Samson, C., Herd, R., Christie, I., Sink, J. E., DesLauriers, A. and Ernst, R. E..
2005.
« Measuring the bulk density of meteorites and rock samples non-destructively using 3D laser imaging ».
In 36th Lunar and Planetary Science Conference (Houston, TX, USA, Mar. 14-18, 2005)
Coll. « LPI Contribution », vol. 1234.
Houston, TX, USA : Lunar and Planetary Institute. Smith, D. L., Samson, C., Herd, R., Christie, I., Sink, J.-E., Deslauriers, A. and Ernst, R. E.. 2005. « Bulk density determination of meteorites using 3D laser imaging ». Communication lors de la conférence : 5th Canadian Space Exploration Workshop: the future of space exploration in Canada (Montreal, QC, Canada, May 12-13, 2005). Sankar, Thiagas S.Sankar, Thiagas S.. 2005. « Nano sensor applications in thermal management ». Communication lors de la conférence : Semi-Therm 21 Conferences (San Jose, CA, USA, Mar., 2005). Seers, Patrice
Terrier, P., Seers, P. and Champliaud, H..
2005.
« Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ».
In Powertrain & Fluid Systems Conference and Exhibition (San Antonio, TX, USA, Oct. 24-27, 2005)
Coll. « SAE Technical Papers », vol. 2005-01-3829.
SAE International. Soulaïmani, Azzeddine
Kerchroud, R., Antoine, X. and Soulaïmani, Azzeddine.
2005.
« Numerical accuracy of a padé-type non-reflecting boundary condition for the finite element solution of acoustic scattering problems at high-frequency ».
International Journal for Numerical Methods in Engineering, vol. 64, nº 10.
pp. 1275-1302.
Soulaïmani, Azzeddine, Feng, Zhengkun and Ben Haj Ali, Amine.
2005.
« Solution techniques for multi-physics problems with application to computational nonlinear aeroelasticity ».
Nonlinear Analysis, vol. 63, nº 5-7.
pp. 1585-1595.
Touihri, R., Soulaïmani, Azzeddine and Plunian, F..
2005.
« A stabilized finite element formulation applied to the kinematic ponomarenko dynamo problem in cylindrical geometry ».
In International Conference of Numerical Analysis and Applied Mathematics (ICNAAM) (Rhodes, Greece, Sept. 16-20, 2005)
pp. 544-547.
Weinheim, Germany : Wiley-VCH Verlag.
Ata, Riadh and Soulaimani, Azzeddine.
2005.
« A stabilized SPH method for inviscid shallow water flows ».
International Journal for Numerical Methods in Fluids, vol. 47, nº 2.
pp. 139-59. St-Amand, André
St-Amand, André.
2005.
« Physique des ondes ».
2e éd.
Montréal : École de technologie supérieure. 405 p. St-Jacques, Michèle
St-Jacques, Michèle and Lévesque, Hélène.
2005.
« Détermination d'un coût selon la typologie d'accident à partir des statistiques d'accidents québécois ».
In 40e Congrès Annuel de l'Association Québécoise du Transport et des Routes (AQTR) (Laval, QC, Canada, 10-12 avril 2005)
Montréal, Canada : AQTR.
St-Jacques, Michèle, Lévesque, Hélène and Laferrière, Denis.
2005.
« Détermination d'un coût d'accident en fonction d'une typologie d'accident et impact sur la sécurité routière : rapport final ».
Université du Québec, École de technologie supérieure, Dép. de génie de la construction ; Service des politiques de sécurité, Ministère des transports du Québec. 297 p. Suryn, Witold
Cote, Marc-Alexis, Suryn, Witold, Laporte, Claude Y. and Martin, Robert A..
2005.
« The evolution path for industrial software quality evaluation methods applying ISO/IEC 9126:2001 quality model : example of MITRE's SQAE method ».
Software Quality Journal, vol. 13, nº 1.
pp. 17-30.
Suryn, Witold and Girard, Daniel.
2005.
« Suryn-Abran consolidated quality lifecycle (CQL) model - The applicative evolution ».
In Business Information System 2005 - 8th International Conference on Business Information Systems (Poznan, Poland, Apr. 20-22, 2005)
pp. 126-146.
Poznan, Poland : Uniwersytet Ekonomiczny w Poznaniu.
Suryn, Witold and Gil, Blanca.
2005.
« ISO 9126-3 internal quality measures: are they still useful? ».
In HCI international 2005 : 11th international conference on human-computer interaction, July 22-27, 2005, Caesars Palace, Las Vegas, Nevada, USA (Las Vegas, NV, USA, July 22-27, 2005)
Mahwah NJ, USA : Lawrence Erlbaum Associates. Tadj, Chakib
Tadj, Chakib and Laroussi, Toufik.
2005.
« Dynamic verification of an object-rule knowledge base using Colored Petri Nets ».
In WMSCI 2005 - The 9th World Multi-Conference on Systemics, Cybernetics and Informatics, Proceedings (Orlando, FL, USA, July 10-13, 2005)
pp. 197-202.
Paris, France : International Social Science Council (ISSC).
Hina, M. D., Ramdane-Cherif, A. and Tadj, C..
2005.
« A ubiquitous context-sensitive multimodal multimedia computing system and its machine learning-based reconfiguration at the architectural level ».
In Seventh IEEE International Symposium on Multimedia (ISM'05) (Irvine, CA, USA, Dec. 14, 2005)
pp. 585-590.
IEEE Computer Society. Tahan, Antoine
Castonguay, J. P. and Tahan, A. S..
2005.
« Correlated characteristics identification and effect in statistical tolerance design ».
WSEAS Transactions on Mathematics, vol. 4, nº 4.
pp. 319-326. Talhi, Chamseddine
Debbabi, M., Mourad, A., Talhi, C. and Yahyaoui, H..
2005.
« Accelerating embedded Java for mobile devices ».
IEEE Communications Magazine, vol. 43, nº 9.
pp. 80-85.
Debbabi, Mourad, Gherbi, Abdelouahed, Ketari, Lamia, Talhi, Chamseddine, Yahyaoui, Hamdi, Zhioua, Sami and Tawbi, Nadia.
2005.
« E-Bunny: A Dynamic Compiler for Embedded Java Virtual Machines ».
The Journal of Object Technology, vol. 4, nº 1.
pp. 83-106. Terriault, Patrick
Wong C., Franklin, Boissonneault, Olivier and Terriault, Patrick.
2005.
« Hybrid micro-macro-mechanical constitutive model for shape-memory alloys ».
In Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics (San Diego, CA, USA, Mar. 7, 2005)
Coll. « Proceedings of SPIE », vol. 5761.
pp. 417-428.
USA : SPIE.
Baril, Y., Brailovski, Vladimir, Cartier, R. and Terriault, Patrick.
2005.
« Feasibility study of a new sternal closure device using tubular braided superelastic nitinol structure ».
In Materials and Processes for Medical Devices Conference & Exposition (Boston, MA, USA, Nov. 14-16, 2005)
pp. 243-248.
Kinsman Road, OH, USA : ASM International.
Gauthier, François-Simon, Vachon, Pierre-Luc, Brailovski, Vladimir and Terriault, Patrick.
2005.
« Development of a numerical model for the optimization of damage controlling carbon/epoxy composites containing SMA wires ».
In International Workshop on Smart Materials and Structures (Cansmart) (Toronto, ON, Canada, Oct. 12-13, 2006)
pp. 261-270.
Kingston, Canada : CanSmart Group.
Torra, V., Isalgue, A., Martorell, F., Terriault, Patrick and Lovey, F..
2005.
« Built in dampers for family homes via SMA : an ANSYS computation scheme on the mesoscopic and the microscopic experimental analysis ».
In Micromechanics and Microstructure Evolution : Modeling, Simulation and Experiments (Madrid, Spain, Sept. 11-16, 2005)
Torra, V., Isalgue, A., Terriault, Patrick and Lovey, A..
2005.
« From experimental data to quake damping by SMA: a critical experimental analysis and simulation ».
In 9th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures (Kobe, Japan, June 13-16, 2005)
Japan : Japan Association for Vibration Technologies (JAVIT). Terrier, Philippe
Terrier, P., Seers, P. and Champliaud, H..
2005.
« Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ».
In Powertrain & Fluid Systems Conference and Exhibition (San Antonio, TX, USA, Oct. 24-27, 2005)
Coll. « SAE Technical Papers », vol. 2005-01-3829.
SAE International. Thibeault, Claude
Dumais, P., Cormier, S, Gagnon, François and Thibeault, Claude.
2005.
« On the implementation of a multi-equalizer ».
In IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Gatineau, Que., Canada, June 19-22, 2005)
pp. 287-290.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Thibeault, Claude.
2005.
« On the test quality evaluation of current testing techniques ».
In IEEE International Workshop on Current and Defect Based Testing (DBT) (Palm Springs, CA, USA, May 1, 2005)
pp. 16-22.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Boland, Jean-François, Thibeault, Claude and Zilic, Zeljko.
2005.
« Using Matlab and Simulink in a SystemC Verification Environment ».
In Proceedings of Design and Verification Conference (DVCon05) (San Jose, CA, USA, Feb. 14-16, 2005 )
Thibeault, Claude (inventeur) 8 November 2005. « Integrated circuit testing system and method ». Socovar S.E.C. (titulaire(s)). Brevet américain US 6,964,003.
Boland, Jean-François, Thibeault, Claude and Zilic, Z..
2005.
« Efficient multi-abstraction level functional verification methodology for DSP applications ».
In Global Signal Processing Expo and Conference (GSPx) (Santa Clara, CA, USA, Sept., 2004)
Savaria, Yvon, Lu, Meng and Thibeault, Claude (inventeurs) 22 February 2005. « Method of generating large scale signal paths in a parallel processing system ». Hyperchip Inc. (titulaire(s)). Brevet américain US 6,858,356. Thomas, Marc
Ayari, H., Thomas, Marc and Doré, Sylvie.
2005.
« Développement d'un modèle statistique de prédiction de la durée de vie du rachis lombaire, dépendant de la contrainte appliquée, de l'âge et de la densité osseuse ».
Perspectives Interdisciplinaires sur le Travail et la Santé , vol. 7, nº 2.
p. 14.
Sassi, S., Cherif, K., Mezghani, L., Thomas, Marc and Kotrane, A.
2005.
« An innovative magnetorheological damper for automotive suspension: from design to experimental characterization ».
Smart Materials and Structures, vol. 14, nº 4.
pp. 811-822.
Thomas, Marc and Laville, Frédéric.
2005.
« Simulation des vibrations mécaniques par Matlab, Simulink et Ansys ».
Québec : Presses de l'Université du Québec. 702 p.
Kerboua, Y., Lakis, A.A., Thomas, Marc and Marcouiller, L..
2005.
« Comportement dynamique des plaques rectangulaires submergées ».
Montréal : École polytechnique de Montréal. 78 p. Ayari, H., Thomas, Marc and Doré, Sylvie. 2005. « Évaluation par un modèle d'éléments finis paramétrique des contraintes dynamiques dans le rachis lombaire, dues aux vibrations du corps entier ». Communication lors de la conférence : Séminaire Santé et Sécurité au Travail (SST) (Montréal, QC, Canada, Nov. 2005).
Badri, Béchir, Thomas, Marc, Archambault, René and Sassi, Sadok.
2005.
« La transformée de Julien : une nouvelle procédure de traitement de signal pour la détection des chocs ».
In 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005)
Calgary, Canada : ACVM.
Bouzidane, A. and Thomas, Marc.
2005.
« An electrorheological hydrostatic journal bearing for controlling rotor vibration ».
In II Eccomas Thematic Conference on Smart Structures and Materials, Lisbon, 18-21 July 2005 : proceedings and papers (Lisbon, Portugal, July 18-21, 2005)
Guerra, M., Thomas, Marc and David, Éric.
2005.
« Turbomachinery blade vibratory stress prediction using contact elements modeling ».
In Symposium on the Evaluation, Control, and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land, Sea and Air Vehicles (Seville, Spain, Oct. 3-7, 2005)
Thomas, Marc, Abassi, K., Lakis, A. A. and Marcouiller, J. L..
2005.
« Analyse modale expérimentale d'une structure soumise à un écoulement turbulent ».
In 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005)
Calgary, Canada : CMVA.
Thomas, Marc and Champliaud, Henri.
2005.
« Effect of residual stresses on modal parameters of welded structures ».
In 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005)
Calgary, Canada : CMVA. Toews, Matthew
Toews, Matthew, Collins, Louis D. and Arbel, Tal.
2005.
« Maximum a posteriori local histogram estimation for image registration ».
In Medical Image Computing and Computer-Assisted Intervention - MICCAI 2005 : 8th International Conference, Palm Springs, CA, USA, October 26-29, 2005, Proceedings, Part II (Palm Springs, CA, USA, Oct. 26-29, 2005)
Coll. « Lecture Notes in Computer Science », vol. 3750.
pp. 163-170.
Springer Berlin Heidelberg. Ung, Bora
Ung, Bora and Sheng, Yunlong.
2005.
« Interference of surface waves on metallic slit transmission ».
In Frontiers in Optics, FiO 2005 (Tucson, AZ, USA, Oct. 16-21, 2005)
Coll. « OSA Technical Digest Series »
Tucson, Arizona : Optical Society of America. Ung, Bora and Sheng, Yunlong. 2005. « Interference of surface waves on metallic slit transmission ». Communication lors de la conférence : Frontiers in Optics, FiO 2005 (Tucson, AZ, USA, Oct. 16-21, 2005). Viens, Martin
Viens, Martin and Wang, Z..
2005.
« HBAR-spectroscopy used for materials characterization ».
In 32nd Annual Review of Process in Quantitative Nondestructive Evaluation (Brunswick, ME, USA, Jul. 31-Aug. 5, 2005)
Coll. « AIP Conference Proceedings », vol. 820.
Melville, NY, USA : American Institute of Physics. Voix, Jérémie
Voix, Jérémie and Laville, Frédéric.
2005.
« Problématiques associées au développement d'un bouchon d'oreille "intelligent" ».
Perspectives Interdisciplinaires sur le Travail et la Santé, vol. 7, nº 2.
Voix, Jérémie. 2005. « Solution pour la protection auditive : aspects techniques et scientifiques ». Communication lors de la conférence : 21e colloque sur la santé et la sécurité du travail (Jonquière, QC, Canada, Oct. 14, 2005). Voix, Jérémie, Laville, Frédéric and Zeidan, Jean. 2005. « In-situ personal assessment of hearing protector performance--recommendations for an updated standard ». Communication lors de la conférence : 149th Meeting of the Acoustical Society of America (Vancouver, B.C, Canada, May 16-20, 2005). Voix, Jérémie, Zeidan, Jean and Cloutier, Alexandra. 2005. « A new approach to the objective assessment of HPD performances in the field ». Communication lors de la conférence : 30th Annual NHCA Hearing Conservation Conference : Decibels in the desert (Tucson, AZ, USA, Feb. 24-26, 2005). Vu, Viet Hung
Vu, Viet Hung and Chu, V. B..
2005.
« Application of peak amplitude method to determination of bridges dynamic parameters ».
Journal of Transport and Communication, nº 11-2005.
pp. 11-15. Vu-Khanh, Toan
Ha-Anh, T. and Vu-Khanh, Toan.
2005.
« Prediction of mechanical properties of polychloroprene during thermo-oxidative aging ».
Polymer Testing, vol. 24, nº 6.
pp. 775-780.
Ha-Anh, T. and Vu-Khanh, Toan.
2005.
« Effects of thermal aging on fracture performance of polychloroprene ».
Journal of Materials Science, vol. 40, nº 19.
pp. 5243-5248.
Jazouli, Said, Luo, Wenbo, Fabrice, Brémand and Vu-Khanh, Toan.
2005.
« Application of time-stress equivalence to nonlinear creep of polycarbonate ».
Polymer Testing, vol. 24, nº 4.
pp. 463-467.
Sih, G.C. and Vu-Khanh, Toan, éds.
2005.
« Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering ».
Montreal : École de technologie supérieure. 532 p.
Vu-Khanh, Toan, Vu, Thi Bich Nga, Nguyen, C. Thang and Lara, Jaime.
2005.
« Gants de protection : étude sur la résistance des gants aux agresseurs mécaniques multiples ».
Coll. « Études et Recherches », vol. R-424.
Montréal, Canada : IRSST. 75 p.
Luo, Wenbo, Vu-Khanh, Toan and Jazouli, Said.
2005.
« A stress accelerated characterization method for long-term properties of viscoelastic materials ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005)
pp. 68-73.
Montréal, Qué., Canada : École de technologie supérieure.
Piroozfar, H., Ha-Anh, T. and Vu-Khanh, Toan.
2005.
« Effects of solvent in swelling behaviour and mechanical properties of polychloroprene ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005)
pp. 45-51.
Montréal, Qué., Canada : École de technologie supérieure.
Ha Anh, T. and Vu-Khanh, Toan.
2005.
« Prediction of mechanical properties of polychloroprene during thermo-oxidative aging ».
In 11th International Conference on Fracture 2005, ICF11 (Turin, Italy, Mar. 20-25, 2005)
pp. 4485-4490.
International Congress on Fracture.
El Majdoubi, M., Vu-Khanh, Toan and David, Éric.
2005.
« Effects of physical aging on fracture and yielding behavior of polypropylene ».
In 1st International Conference on Mechanics of Biomaterials & Tissue (Waikoloa, HI, USA, Dec. 11-15, 2005)
Nguyen, C. T., Vu-Khanh, T. and Lara, J..
2005.
« A study on the puncture resistance of rubber materials used in protective clothing ».
In 8th Symposium Performance of Protective Clothing : Global Needs and Emerging Markets (Tampa, FL, USA, Jan. 13-14, 2004)
Coll. « ASTM Special Technical Publication », vol. 1462.
pp. 175-188.
American Society for Testing and Materials.
Thang Nguyen, C., Vu-Khanh, T. and Lara, J..
2005.
« A study on the puncture resistance of rubber materials used in protective clothing ».
Journal of ASTM International, vol. 2, nº 4.
pp. 245-258.
Vu Thi, B. N., Vu-Khanh, T. and Lara, J..
2005.
« Effect of friction on cut resistance of polymers ».
Journal of Thermoplastic Composite Materials, vol. 18, nº 1.
pp. 23-36.
Vu, T. B. N., Vu-Khanh, T. and Lara, J..
2005.
« Progress in the characterization of the cutting resistance of protective materials ».
Journal of ASTM International, vol. 2, nº 5.
pp. 399-413. Vázquez, Carlos
Tam, Wa James, Speranza, Filippo, Zhang, Liang, Renaud, Ron, Chan, Jason and Vázquez, Carlos.
2005.
« Depth image based rendering for multiview stereoscopic displays: role of information at object boundaries ».
In Three-Dimensional TV, Video, and Display IV (Boston, MA, USA, Oct. 24-26, 2005)
Coll. « Proceedings of SPIE », vol. 6392.
pp. 97-107.
Bellingham, WA, USA : SPIE.
Bozinovic, N., Konrad, J., Wei, Zhao and Vázquez, Carlos.
2005.
« On the importance of motion invertibility in MCTF/DWT video coding ».
In IEEE International Conference on Acoustics, Speech, and Signal Processing, 2005. Proceedings. (ICASSP '05) (Philadelphia, PA, USA, Mar. 18-23, 2005)
pp. 49-52.
Piscataway, NJ, USA : IEEE.
Vázquez, Carlos, Dubois, Eric and Konrad, Janusz.
2005.
« Reconstruction of nonuniformly sampled images in spline spaces ».
IEEE Transactions on Image Processing, vol. 14, nº 6.
pp. 713-725. Weiss, Julien
Weiss, Julien, Chokani, Ndaona and Comte-Bellot, Geneviève.
2005.
« Constant-temperature and constant-voltage anemometer use in a Mach 2.5 flow ».
AIAA Journal, vol. 43, nº 5.
pp. 1140-1143. Wong, Tony
Nonnon, P., Cervera, D., Bigras, Pascal and Wong, Tony.
2005.
« Conception et réalisation d'un laboratoire virtuel d'expérimentation en hydraulique et pneumatique ».
Res Academica, vol. 23, nº 2.
pp. 169-187.
Wong, Tony, Bigras, Pascal and Cervera, D..
2005.
« A software application for visualizing and understanding hydraulic and pneumatic networks ».
Computer Applications in Engineering Education, vol. 13, nº 3.
pp. 169-180.
Côté, Pascal, Wong, Tony and Sabourin, Robert.
2005.
« A hybrid multi-objective evolutionary algorithm for the uncapacitated exam proximity problem ».
In Practice and Theory of Automated Timetabling V : 5th International Conference, PATAT 2004, Pittsburgh, PA, USA, August 18-20, 2004, Revised Selected Papers (Pittsburgh, PA, USA, Aug. 18-20, 2004)
Coll. « Lecture Notes in Computer Science », vol. 3616.
pp. 294-312.
Berlin, Germany : Springer-Verlag.
Radtke, P., Wong, Tony and Sabourin, Robert.
2005.
« A multi-objective memetic algorithm for intelligent feature extraction ».
In Evolutionary Multi-Criterion Optimization Third International Conference, EMO 2005, Guanajuato, Mexico, March 9-11, 2005. Proceedings (Guanajuato, Mexico, March 9-11, 2005)
Coll. « Lecture Notes in Computer Science », vol. 3410.
pp. 767-781.
Berlin, Germany : Springer-Verlag.
Radtke, P.V.M., Sabourin, Robert and Wong, Tony.
2005.
« Intelligent feature extraction for ensemble of classifiers ».
In 8th International Conference on Document Analysis and Recognition (ICDAR) (Seoul, South Korea, Aug. 29-Sept. 1, 2005)
pp. 866-870.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Wong, Tony, Bigras, Pascal and De Kelper, Bruno.
2005.
« A multi-neighborhood and multi-operator strategy for the uncapacitated exam proximity problem ».
In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Hawaii, USA, Oct.10-12, 2005)
pp. 3810-3816.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ma, Irwin, Wong, Tony and Sankar, Thiagas.
2005.
« Volatility forecast by discrete stochastic optimization and genetic algorithms ».
In 4th International Conference on Computational Intelligence in Economics and Finance (CIEF) (Salt Lake City, UT, USA, July 21-26, 2005)
pp. 992-996.
Yeste Ojeda, Omar Artemi
Yeste Ojeda, Omar A. and Grajal, Jesus.
2005.
« CFAR detectors for unknown signals based on the spectral correlation measurement ».
In 2005 IEEE International Radar Conference (Arlington, VA, USA, May 9-12, 2005)
pp. 944-949.
IEEE. Zhang, Gaixia
Tao, Zongming, Zhang, Yinchao, Cao, Kaifa, Yu, Shihua, Fang, Xin, Lu, Yonghui, Zhang, Gaixia, Shao, Shisheng, Liu, Xiaoqin and Hu, Huanling.
2005.
« Study of the first Stokes lines of Raman cell full of CH4, H2, D2 and their mixture with Ar,He gases ».
In Optical Technologies for Atmospheric, Ocean, and Environmental Studies (Beijing, China, oct. 15-20, 2004)
Coll. « Proceedings of SPIE », vol. 5832.
pp. 687-694.
SPIE.
Zhang, G., Zhang, Y., Tao, Z. M., Liu, X. Q., Shao, S. S., Tan, K., Lu, Y. H., Zhou, J. and Hu, H. L..
2005.
« Lidar geometrical form factor and its effect on aerosol detection ».
Chinese Journal of Quantum Electronics, vol. 22, nº 2.
pp. 299-305. Zhani, Mohamed Faten
Zhani, M. F., Rouai, F., Kamoun, F. and Ahmed, M. B..
2005.
« Internet traffic prediction using a neurofuzzy approach ».
In 5èmes journées scientifiques des jeunes chercheurs en Génie Electrique et Informatique, GEI'2005 (Sousse, Tunisia, Mar. 25-27, 2005)
de Guise, Jacques A.
Benameur, S., Mignotte, M., Destrempes, F. and de Guise, Jacques A..
2005.
« Three-dimensional biplanar reconstruction of scoliotic rib cage using the estimation of a mixture of probabilistic prior models ».
IEEE Transactions on Biomedical Engineering, vol. 52, nº 10.
pp. 1713-1728.
Benameur, S., Mignotte, M., Labelle, H. and de Guise, Jacques A..
2005.
« A hierarchical statistical modeling approach for the unsupervised 3D biplanar reconstruction of the scoliotic spine ».
IEEE Transactions on Biomedical Engineering, vol. 52, nº 12.
pp. 2041-2057.
Hagemeister, Nicola, Parent, Gerald, Van de Putte, Maxime, St-Onge, Nancy, Duval, Nicolas and de Guise, Jacques A..
2005.
« Reproducible method for studying three-dimensional knee kinematics ».
Journal of Biomechanics, vol. 38, nº 9.
pp. 1926-1931.
Kolta, S., Le Bras, A., Mitton, D., Bousson, V., de Guise, Jacques A., Fechtenbaum, J., Laredon, J.D., Roux, C. and Skalli, W..
2005.
« Three-dimensional x-ray absorptiometry (3D-XA) : a method for reconstruction of human bones using a dual x-ray absorptiometry device ».
Osteoporosis International, vol. 16, nº 8.
pp. 969-976.
Nau, Thomas, Chevalier, Yan, Hagemeister, Nicola, de Guise, Jacques A. and Duval, Nicolas.
2005.
« Comparison of 2 surgical techniques of posterolateral corner reconstruction of the knee ».
The American Journal of Sports Medicine, vol. 33, nº 12.
pp. 1838-1845.
Nau, Thomas, Chevalier, Yan, Hagemeister, Nicola, Duval, Nicolas and de Guise, Jacques A..
2005.
« 3-D kinematic in vitro comparison of posterolateral corner reconstruction techniques in a combined injury model ».
Knee Surgery, Sports Traumatology, Arthroscopy, vol. 13, nº 7.
pp. 572-580.
Despres, Philippe, Beaudoin, Gilles, Gravel, Pierre and de Guise, Jacques A..
2005.
« Physical characteristics of a low-dose gas microstrip detector for orthopedic x-ray imaging ».
Medical Physics, vol. 32, nº 4.
pp. 1193-1204.
Dumas, Raphaël, Aissaoui, Rachid, Mitton, David, Skalli, Wafa and de Guise, Jacques A..
2005.
« Personalized body segment parameters from biplanar low-dose radiography ».
IEEE Transactions on Biomedical Engineering, vol. 52, nº 10.
pp. 1756-1763.
Després, Philippe, Beaudoin, Gilles, Gravel, Pierre and de Guise, Jacques A..
2005.
« Evaluation of a full-scale gas microstrip detector for low-dose X-ray imaging ».
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 536, nº 1-2.
pp. 52-60.
Godbout, Benoit, de Guise, Jacques A., Soulez, Gilles and Cloutier, Guy.
2005.
« 3D elastic registration of vessel structures from IVUS data on biplane angiography ».
Academic Radiology, vol. 12, nº 1.
pp. 10-16. Levasseur, A., Tétreault, P., de Guise, Jacques A., Nuño, Natalia and Hagemeister, Nicola. 2005. « Estimation du centre de rotation de l'articulation glénohumérale ». Affiche présentée lors de la conférence : 8e Congrès des Étudiants du CRCHUM (Montréal, Canada, 20 déc. 2005). Levasseur, A., Hagemeister, Nicola, Tétreault, P., Nuño, Natalia and de Guise, Jacques A.. 2005. « Évaluation de la cinématique tridimensionnelle (3D) de l'articulation scapulo-humérale dans le but de concevoir et d'évaluer une nouvelle prothèse humérale : résultats préliminaires ». Affiche présentée lors de la conférence : Association Canadienne Orthopédique (ACO) (Montréal, QC, Canada, 3-5 juin 2005).
Li, Yue, Aissaoui, Rachid, Boivin, Karine, Turcot, Katia, Duval, Nicolas, Roy, André, Pontbriand, Robert, Hagemeister, Nicola and de Guise, Jacques A..
2005.
« Development of a tool for analyzing 3D knee kinematic characteristics of different daily activities ».
In IEEE 27th Annual International Conference of the Engineering in Medicine and Biology Society (EMBS) (Shanghai, China, Aug. 31-Sept. 3, 2005)
pp. 7451-7454.
Piscataway, N.J. : Institute of Electrical and Electronics Engineers Inc.. Vasquez, P. and Nuño, Natalia. 2005. « Effect of residual stresses due to cement curing in cemented hip implants : a numerical study ». Communication lors de la conférence : 3rd International Symposium on Advenced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Turcot, K., Boivin, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Approche biomécanique 3D pour l'évaluation de patients gonarthrosiques : faisabilité et résultats préliminaires ». Affiche présentée lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005). Tanguay, F., Mac-Thiong, J.-M., de Guise, Jacques A. and Labelle, H.. 2005. « Relation between pelvic geometry and lumbar lordosis following surgery in adolescent idiopathic scoliosis ». Communication lors de la conférence : Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, May 6, 2005). Südhoff, I., Skalli, W. and de Guise, Jacques A.. 2005. « Modélisation géométrique et mécanique personnalisée de l'appareil locomoteur ». Communication lors de la conférence : Séminaire de Modélisation, Centre de Réadaptation Marie-Enfant (Montréal, QC, Canada, 10 mars 2006). Requiao, L. F., Fuentes, A., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Différence des déplacements linéaires 3D du genou entre les hommes et les femmes lors de la marche sur le tapis roulant ». Communication lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005). Mecheri, H., Aissaoui, Rachid, Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Comparison of two finite helical algorithms on the determination of the finite screw axis of the human knee joint ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Mac-Thiong, J.-M., Labelle, H. and de Guise, Jacques A.. 2005. « Morphologies spino-pelvienne chez les adolescents normaux et chez les sujets atteints de scoliose idiopathique adolescente ». Communication lors de la conférence : 35e Réunion Annuelle de la Société de la Scoliose du Québec (Montréal, QC, Canada, 14-15 oct. 2005). Li, Y., Aissaoui, Rachid, Boivin, K., Turcot, K., Duval, N., Roy, A., Pontbriand, R., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Development of a tool for analyzing 3D knee kinematic characteristics of different daily activities ». Communication lors de la conférence : IEEE 27th Annual International Conference of the Engineering in Medicine and Biology Society (EMBS) (Shanghai, China, Aug. 31-Sept. 3, 2005). Levasseur, A., Hagemeister, Nicola, Tétreault, P., Nuño, Natalia and de Guise, Jacques A.. 2005. « Three-dimensional (3D) evaluation of the glenohumeral joint kinematics : preliminary results ». Communication lors de la conférence : Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, May 6, 2005). Lavoie, F., Parent, G. and de Guise, Jacques A.. 2005. « Proposal of a new femoral axes system for 3D kinematic assessment of the knee ». Communication lors de la conférence : 8th Annual Congress of the CHUM Research Center (Montreal, QC, Canada, Dec. 20, 2005). Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie and de Guise, Jacques A.. 2005. « Gesture standardization increases the reproducibility of 3D kinematic measurements of the knee joint ». Communication lors de la conférence : 60th Canadian Orthopaedic Association Annual Meeting (Montreal, QC, Canada, June 3-5, 2005). Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie and de Guise, Jacques A.. 2005. « Gesture and posture as important factors in 3D kinematic assessment of the knee ». Communication lors de la conférence : 31st Meeting of the Canadian Orthopaedic Residents Association (Montreal, QC, Canada, June 2-5, 2005). Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie and de Guise, Jacques A.. 2005. « Gesture and posture as important factors in 3D kinematic assessment of the knee ». Communication lors de la conférence : Research Day of the Programme d'Orthopédie Édouard-Samson (Montreal, QC, Canada, May 6, 2005). Fuentes Dupré, A., Requiao, L., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Validation d'un nouvel exosquelette pour l'évaluation tridimensionnelle de la biomécanique du genou ». Communication lors de la conférence : Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005). Barré, A., Aissaoui, Rachid, Nuño, Natalia and de Guise, Jacques A.. 2005. « Estimation des forces de contact fémoro-tibiales lors de la marche ». Communication lors de la conférence : 8e Congrès des Étudiants du CRCHUM (Montréal, QC, Canada, 20 déc. 2005). Aissaoui, Rachid, Li, Y., Boivin, K., Turcot, K., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Utilisation de l'exosquelette pour l'analyse cinématique tridimensionnelle du genou chez la personne valide et atteinte de gonarthrose: perspective clinique ». Communication lors de la conférence : 3e Journée Annuelle de Recherche en Orthopédie (Lausanne, Suisse, 1 juil. 2005). Gravel, P., Després, P., Beaudoin, G. and de Guise, Jacques A.. 2005. « Resolution enhancement in dual-energy x-ray imaging ». Communication lors de la conférence : SPIE International Symposium on Medical Imaging (San Diego, CA, USA, Feb. 17, 2005). Boivin, K., Turcot, K., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Feasibility and reliability of a new biomechanical approach for the functional assessment of the knee osteoarthritis: preliminary results in a asymptomatic elderly population ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Charbonneau, M., Husse, S., Parent, G., Fuentes Dupré, A., Aissaoui, Rachid, Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Toward the use of 3D motion capture in clinical setting, from the lab to clinics ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Charbonneau, M., Husse, S., Parent, G., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Enregistrement du mouvement 3D du genou en site clinique ». Communication lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005).
Dubousset, J., Charpak, G., Dorion, I., Skalli, W., Lavaste, F., de Guise, J. A., Kalifa, G. and Ferey, S..
2005.
« Le système EOS. Nouvelle imagerie Ostéo-Articulaire basse dose en position debout ».
e-Mémoires de l'Académie Nationale de chirurgie, vol. 4, nº 4.
pp. 22-27.
Dubousset, J., Charpak, G., Dorion, I., Skalli, W., Lavaste, F., Deguise, J., Kalifa, G. and Ferey, S..
2005.
« Une nouvelle imagerie ostéo-articulaire basse dose en position debout : le système EOS ».
Radioprotection, vol. 40, nº 2.
pp. 245-255.
Dubousset, Jean, Charpak, Georges, Dorion, Irène, Skali, Wafa, Lavaste, François, de Guise, Jacques, Kalifa, Gabriel and Ferey, Solène.
2005.
« Une nouvelle imagerie Ostéo-Articulaire basse dose en position debout : le système EOS ».
Bulletin de l'Académie Nationale de Médecine, vol. 189, nº 2.
pp. 287-297. Fuentes Dupré, A., Requiao, L., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Reproducibility of 3D knee kinematics measured by a new three-dimensional knee analyzer ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005).
Gravel, Pierre, Després, Philippe, Beaudoin, Gilles and de Guise, Jacques A..
2005.
« Resolution enhancement in dual-energy x-ray imaging ».
In Medical Imaging 2005: Image Processing (San Diego, CA, USA, Feb. 13-17, 2005)
Coll. « Proceedings of SPIE », vol. 5747.
pp. 614-624.
SPIE. Levasseur, A., Hagemeister, Nicola, Tétreault, P., Nuño, Natalia and de Guise, Jacques A.. 2005. « Effect of freezing and thawing in shoulder kinematics analysis ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Li, Y., Aissaoui, Rachid, Boivin, K., Turcot, K., Duval, N., Roy, A., Pontbriand, R., Hagemeister, Nicola and de Guise, Jacques A.. 2005. « Is static knee alignment angle related to dynamic knee adduction/abduction angles during bilateral squatting? ». Communication lors de la conférence : 8e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montreal, QC, Canada, Dec. 20, 2005). Li, Y., Aissaoui, Rachid, Charbonneau, M., Husse, S., Fuentes Dupré, A. and de Guise, Jacques A.. 2005. « Gait pattern classification of healthy subjects based on kinematic parameters ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Pelletier, Jean-Pierre, Martel-Pelletier, Johanne, de Guise, Jacques, Raynauld, Jean-Pierre, Berthiaume, Marie-Josée, Beaudoin, Gilles, Godbout, Benoît and Kauffman, Claude (inventeurs) 31 May 2005. « Evaluating disease progression using magnetic resonance imaging ». Arthrovision Inc. (titulaire(s)). Brevet américain US 6,901,280. Requiao, L., Fuentes Dupré, A., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « Gender differences in three-dimensional knee joint translation during gait ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Südhoff, I., Van Driessche, S., de Guise, Jacques A., Laporte, S. and Skalli, W.. 2005. « Comparing three attachment systems used to determine knee kinematics during gait ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials/Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). Tanguay, F., Mac-Thiong, JM., de Guise, Jacques A. and Labelle, H.. 2005. « Relation entre la géométrie pelvienne et la lordose lombaire suite à la correction chirurgicale d'une scoliose idiopathique adolescente ». Communication lors de la conférence : 25e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 6 mai 2005).
Turcot, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A..
2005.
« Measurement of knee joint impact during gait with three-dimensional linear accelerations: reproducibility on a medial knee osteoarthritis population ».
[Conference paper summary]. Osteoarthritis and Cartilage, vol. 13, nº Suppl. A.
S77. Turcot, K., Boivin, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola, Parent, G. and de Guise, Jacques A.. 2005. « 3D biomechanical measurement of shock loading during treadmill walking: reliability on an elderly population ». Communication lors de la conférence : 3rd International Symposium on Advanced Biomaterials and Biomechanics (ISAB2) (Montreal, QC, Canada, Apr. 3-6, 2005). |