| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Liste des publications de "Jahazi, Mohammad"Nombre de documents archivés : 399.
Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2007.
« Influence of friction stir welding on the tensile behaviour of AZ31B magnesium alloy ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
Canadian Institute of Mining, Metallurgy and Petroleum.
Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2008.
« Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy ».
Materials Science and Engineering A, vol. 472, nº 1-2.
pp. 179-186.
Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2007.
« Strain hardening behavior of a friction stir welded magnesium alloy ».
Scripta Materialia, vol. 57, nº 11.
pp. 1004-1007.
Aghdashi, S. T., Khodabandeh, A. et Jahazi, M..
2000.
« The determination of optimum forging condiions for a vanadium containing microalloyed steel ».
In The Fourth International Conference on HSLA Steels October 30-November 2, 2000, Xi'an, China (Beijing, China, Oct. 30-Nov. 2, 2000)
pp. 404-409.
The chinese society for metals.
Ahmed, M. Zaid, Chadha, K., Reddy, S. R., Shahriari, D., Bhattacharjee, P. P. et Jahazi, M..
2020.
« Influence of process parameters on microstructure evolution during hot deformation of a Eutectic High-Entropy Alloy (EHEA) ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 51, nº 12.
pp. 6406-6420.
Aidibe, Ali, Nejad, Mojtaba Kamali, Tahan, Antoine, Jahazi, Mohammad et Cloutier, Sylvain G..
2016.
« A proposition for new quality 3D indexes to measure surface roughness ».
In 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016)
Coll. « Procedia CIRP », vol. 46.
pp. 327-330.
Elsevier.
Aidibe, Ali, Nejad, Mojtaba Kamali, Tahan, Antoine, Jahazi, Mohammad et Cloutier, Sylvain G..
2017.
« Surface characterization of die inserts used for LED lamp plastic lenses ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 3395-3403.
Akmoulin, A., Djahazi, M. et Jonas, J. J..
1991.
« Effect of initial porosity on the superplastic behavior of Y-TZP in vacuum ».
In Superplasticity in advanced materials: proceedings of the International Conference on Superplasticity in Advanced Materials held in Osaka, Japan, June 3-6, 1991 (Osaka, Japan, June 3-6, 1991)
pp. 233-239.
Tokyo, Japan :
Akmoulin, I. A., Djahazi, M., Buravova, N. D. et Jonas, J. J..
1993.
« Superplastic forging procedures for manufacture of ceramic yttria stabilised tetragonal zirconia products ».
Materials Science and Technology, vol. 9, nº 1.
pp. 26-33.
Akmoulin, I. A., Djahazi, M. et Jonas, J. J..
1991.
« Enhanced deformation behavior of incompletely sintered Y-TZP zirconia ».
Scripta metallurgica et materialia, vol. 25, nº 5.
pp. 1035-1040.
Aleyari, Alireza, Majidi, Omid, Bombardier, Nicolas, Pham, Xuan-Tan et Jahazi, Mohammad.
2020.
« Finite element and experimental analysis of the preheating stage of High Speed Blow Forming (HSBF) process ».
Journal of Manufacturing Processes, vol. 49.
pp. 10-17.
Al-Hashedi, Ashwaq A., Laurenti, Marco, Amine Mezour, Mohamed, Basiri, Tayebeh, Touazine, Heithem, Jahazi, Mohamed et Tamimi, Faleh.
2019.
« Advanced inorganic nanocomposite for decontaminating titanium dental implants ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 107, nº 3.
pp. 761-772.
Al-Kazzaz, H., Medraj, M., Cao, X. et Jahazi, M..
2008.
« Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: modeling and experimental investigations ».
Materials Chemistry and Physics, vol. 109, nº 1.
pp. 61-76.
Al-Kazzaz, H., Medraj, M., Cao, X., Jahazi, M. et Min, X..
2005.
« Effect of welding speed on Nd:YAG laser weldability of ZE41A-T5 magnesium sand castings ».
In Light metals 2005 : proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada (Calgary, AB, Canada, Aug. 21-24, 2005)
pp. 137-149.
Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.
Al-Kazzaz, H., Medraj, M., Cao, X., Xiao, M. et Jahazi, M..
2006.
« Effect of laser power and joint gap on weld quality of aerospace grade ZE41A-T5 magnesium alloy using Nd:YAG laser ».
In Magnesium technology in the global age : proceedings of the International Symposium on Magnesium Technology in the Global Age, October 1-4, 2006, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 503-518.
Canadian Institute of Mining, Metallurgy and Petroleum.
Al-Kazzaz, Haider, Cao, Xinjin, Jahazi, Mohammad et Medraj, Mamoun.
2008.
« Reliability of laser welding process for ZE41A-T5 magnesium alloy sand castings ».
Materials Transactions, vol. 49, nº 4.
pp. 774-781.
Anderson, M., Bridier, F., Gholipour, J., Jahazi, M., Wanjara, P., Bocher, P. et Savoie, J..
2016.
« Mechanical and metallurgical evolution of stainless steel 321 in a multi-step forming process ».
Journal of Materials Engineering and Performance, vol. 25, nº 4.
pp. 1526-1538.
Anderson, Melissa, Bocher, Philippe, Gholipour, Javad, Jahazi, Mohammad, Savoie, Jean et Wanjara, Priti.
2012.
« Increasing the hydroformability of stainless steel 321 by multistep processing ».
In Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012)
Coll. « Steel Research International »
pp. 1243-1246.
Krakow, Poland : Wiley-VCH Verlag.
Anderson, Melissa, Gholipour, Javad, Bridier, Florent, Bocher, Philippe, Jahazi, Mohammad, Savoie, Jean et Wanjara, Priti.
2013.
« Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 37, nº 1.
pp. 39-52.
Aranas, Clodualdo Jr., Rodrigues, Samuel, Fall, Ameth, Jahazi, Mohammad et Jonas, John.
2018.
« Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ».
Metals, vol. 8, nº 5.
Aranas, Clodualdo, Foul, Anes, Guo, Baoqi, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2017.
« Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ».
Scripta Materialia, vol. 133.
pp. 83-85.
Aranas, Clodualdo, Grewal, Rupanjit, Chadha, Kanwal, Shahriari, Davood, Jahazi, Mohammad et Jonas, John J..
2015.
« Formation of widmanstätten ferrite in a C-Mn steel at temperatures high in the austenite phase field ».
In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 201 (PTM 2015) (Whistler, BC, Canada, June 28, 2015 - July 3, 2015)
pp. 613-620.
International Conference on Solid-Solid Phase Transformations in Inorganic Materials.
Arkhazloo, Nima Bohlooli, Bazdidi-Tehrani, Farzad, Jadidi, Mohammad, Morin, Jean-Benoit et Jahazi, Mohammad.
2022.
« Determination of temperature distribution during heat treatment of forgings: Simulation and experiment ».
Heat Transfer Engineering, vol. 43, nº 12.
pp. 1041-1064.
Arkhazloo, Nima Bohlooli, Bazdidi-Tehrani, Farzad, Jean-Benoit, Morin et Jahazi, Mohammad.
2018.
« A numerical thermal analysis of the heating process of large size forged ingots ».
In THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 2278-2283.
Trans Tech Publications.
Asadi, Mahyar, Guillot, Dominic, Weck, Arnaud, Koul, Ashok K., Chamanfar, Ahmad et Jahazi, Mohammad.
2013.
« Constructing a validated deformation mechanism map using low temperature creep strain accommodation processes for waspaloy (A nickel-based superalloy) ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013)
New York, NY, USA : American Society of Mechanical Engineers. Azzaz, Riadh, Kaveh, Kianoosh, Morin, Jean-Benoit, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira. 2022. « Slag characterization regarding refractory wear in EAF steelmaking route ». Affiche présentée lors de la conférence : 61st Annual Conference of Metallurgists (COM) (Montreal, QC, Canada, Aug. 21-24, 2022).
Barka, Noureddine, Chebak, Ahmed, El Ouafi, Abderrazak, Jahazi, Mohammad et Menou, Abdellah.
2014.
« A new approach in optimizing the induction heating process using flux concentrators: Application to 4340 steel spur gear ».
Journal of Materials Engineering and Performance, vol. 23, nº 9.
pp. 3092-3099.
Bastajib, N., Boutana, N., Bocher, P. et Jahazi, M..
2010.
« Application of cellular automata method to simulate the hot deformation behavior of a dual phase titanium alloy ».
Technische Mechanik, vol. 30, nº 1-3.
Bédard, Frédéric, Jahazi, Mohammad et Songmene, Victor.
2020.
« Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics ».
International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2.
pp. 333-342.
Bedard, Frederic, Loucif, Abdelhalim, Jahazi, Mohammad et Songmene, Victor.
2023.
« Microstructural damage during electrical discharge machining of a high silicon aluminum alloy for space applications ».
International Journal of Advanced Manufacturing Technology, vol. 128, nº 5-6.
pp. 2311-2317.
Belanger, Pierre et Jahazi, Mohammad.
2019.
« Friction stir welded lap joint inspection using ultrasonic guided waves ».
In 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018)
Coll. « AIP Conference Proceedings », vol. 2102.
USA : AIP Publishing. Belhadj, T., Songmene, V. et Jahazi, M.. 2015. « Influence des paramètres de procédé sur la distorsion de grandes plaques d'aluminium formées par thermoformage : phase d'éjection ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (Chicoutimi, QC, Canada, 11 nov. 2015).
Ben Fredj, Emna, Ghasemi Nanesa, Hadi, Jahazi, Mohammad et Morin, Jean-Benoit.
2018.
« Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ».
Journal of Iron and Steel Research International, vol. 25, nº 5.
pp. 554-562.
Bensalah, M., Chamanfar, A., Chentouf, S. et Jahazi, M..
2013.
« The influence of thermomechanical processing on prior austenite grain size in medium carbon low alloy steels ».
In Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) (Montreal, QC, Canada, Oct. 27-31, 2013)
Curran.
Bertrand, Samuel, Shahriari, Davood, Jahazi, Mohammad et Champliaud, Henri.
2018.
« Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ».
In 17th International Conference on Metal Forming (Metal Forming) (Toyohashi, Japan, Sept. 16-19, 2018)
Coll. « Procedia Manufacturing », vol. 15.
pp. 1382-1390.
Netherlands : Elsevier B.V..
Bitterlin, Matthieu, Loucif, Abdelhalim, Charbonnier, Nicolas, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Morin, Jean-Benoît.
2016.
« Cracking mechanisms in large size ingots of high nickel content low alloyed steel ».
Engineering Failure Analysis, vol. 68.
pp. 122-131.
Bitterlin, Matthieu, Shahriari, Davood, Lapierre-Boire, Louis-Philippe, Morin, Jean-Benoît et Jahazi, Mohammad.
2018.
« Hot deformation behavior of a nickel-modified AISI 4330 steel ».
ISIJ International, vol. 58, nº 9.
pp. 1711-1720.
Bocher, P., Jahazi, M., Germain, L., Gey, N. et Humbert, M..
2005.
« Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005)
pp. 523-530.
Montréal, Qué., Canada : École de technologie supérieure.
Bocher, Philippe, Jahazi, Mohammad, Germain, Lionel, Wanjara, Priti, Gey, Nathalie et Humbert, Michel.
2005.
« β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ».
Solid State Phenomena, vol. 105.
pp. 127-132.
Bohlooli Arkhazloo, Nima, Bazdidi-Tehrani, Farzad, Morin, Jean-Benoît et Jahazi, Mohammad.
2021.
« Optimization of furnace residence time and loading pattern during heat treatment of large size forgings ».
International Journal of Advanced Manufacturing Technology, vol. 113, nº 9-10.
pp. 2447-2460.
Bohlooli Arkhazloo, Nima, Bouissa, Yassine, Bazdidi-Tehrani, Farzad, Jadidi, Mohammad, Morin, Jean-Benoit et Jahazi, Mohammad.
2019.
« Experimental and unsteady CFD analyses of the heating process of large size forgings in a gas-fired furnace ».
Case Studies in Thermal Engineering, vol. 14.
Bonakdar, Ali, Molavi-Zarandi, Marjan, Chamanfar, Ahmad, Jahazi, Mohammad, Firoozrai, Arash et Morin, Eric.
2017.
« Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ».
Journal of Manufacturing Processes, vol. 26.
pp. 339-354.
Bouissa, Y., Bohlooli, N., Shahriari, D., Champliaud, H., Morin, J. B. et Jahazi, M..
2020.
« FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ».
Journal of Manufacturing Processes, vol. 58.
pp. 592-605. Bouissa, Yassine, Champliaud, Henri, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe, Morin, Jean-Benoît et Poulain, Nicolas. 2017. « Modeling heterogeneities effects on phase transformation during quenching of large size forged steel ingots ». Communication lors de la conférence : 14th U.S. National Congress on Computational Mechanics (USNCCM) (Montreal, QC, Canada, July 17-20, 2017).
Bouissa, Yassine, Shahriari, Davood, Champliaud, Henri et Jahazi, Mohammad.
2019.
« Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ».
Case Studies in Thermal Engineering, vol. 13.
Bouissa, Yassine, Zorgani, Muftah, Shahriari, Davood, Champliaud, Henri, Morin, Jean-Benoît et Jahazi, Mohammad.
2021.
« Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 52, nº 5.
pp. 1883-1900.
Boutana, N., Bocher, P. et Jahazi, M..
2013.
« Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata ».
International Journal of Fatigue, vol. 51.
pp. 49-56.
Boutana, N., Bocher, P., Jahazi, M., Piot, D. et Montheillet, F..
2008.
« Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 32, nº 2.
pp. 195-213.
Boutana, N., Bocher, P., Jahazi, M., Savoie, J., Piot, D. et Montheillet, F..
2005.
« Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005)
pp. 273-280.
Montréal, Qué., Canada : École de technologie supérieure.
Boutana, N., Bocher, Philippe, Jahazi, M., Piot, D. et Montheillet, F..
2008.
« The microstructural modeling of room temperature creep in titanium alloys using cellular automata model ».
International Journal of Microstructure and Materials Properties, vol. 3, nº 4-5.
pp. 642-653.
Boutana, N., Bocher, Philippe, Jahazi, M., Piot, D. et Motheillet, F..
2007.
« Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ».
In Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007)
pp. 267-270.
Warrendale, PA, USA : Minerals, Metals and Materials Society.
Boutana, Nabil, Bocher, Philippe, Jahazi, Mohammad, Piot, D. et Montheillet, F..
2006.
« Utilisation des automates cellulaires pour étudier le comportement en fatigue-fluage des alliages de titane ».
In Matériaux 2006 (Dijon, France, 13-17 nov. 2006)
pp. 781-790.
Bres, Antoine, Monsarrat, Bruno, Dubourg, Laurent, Birglen, Lionel, Perron, Claude, Jahazi, Mohammad et Baron, Luc.
2010.
« Simulation of friction stir welding using industrial robots ».
Industrial Robot, vol. 37, nº 1.
pp. 36-50.
Brionne, Gary, Loucif, Abdelhalim, Zhang, Chunping, Lapierre-Boire, Louis-Philippe et Jahazi, Mohammad.
2018.
« 3D FEM simulation of the effect of cooling rate on SDAS and macrosegregation of a high strength steel ».
In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 2360-2364.
Trans Tech Publications Ltd.
Brochu, M., Girard, S. et Jahazi, M..
2004.
« Electron beam free forming using brazing paste and solid wires as filler metal ».
In Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004)
pp. 323-334.
Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.
Cao, X., Guo, M. et Jahazi, M..
2008.
« Continuous wave ND:YAG laser welding of Ti-6A1-4V titanium alloy ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 197-208.
Canadian Institute of Mining Metallurgy & Petroleum.
Cao, X. et Jahazi, M..
2007.
« Applications of laser welding and friction stir welding technologies for joining aerospace magnesium alloys ».
In LMT 2007 : proceedings of the Third International Conference on Light Metals Technology : September 24-26, 2007, Saint-Sauveur, Québec, Canada (Saint-Sauveur, QC, Canada, Sept. 24-26, 2007)
National Research Council Canada = Conseil national de recherches Canada.
Cao, X. et Jahazi, M..
2011.
« Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy ».
Materials and Design, vol. 32, nº 1.
pp. 1-11.
Cao, X. et Jahazi, M..
2009.
« Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser ».
Optics and Lasers in Engineering, vol. 47, nº 11.
pp. 1231-1241.
Cao, X. et Jahazi, M..
2009.
« Effect of welding speed on lap joint quality of AZ31 magnesium alloy ».
In Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008)
pp. 72-80.
ASM International.
Cao, X. et Jahazi, M..
2009.
« Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy ».
Materials and Design, vol. 30, nº 6.
pp. 2033-2042.
Cao, X. et Jahazi, M..
2005.
« Estimation of resistance of filter media used for Prefil Footprinter tests of liquid aluminium alloys ».
Materials Science and Technology, vol. 21, nº 10.
pp. 1192-1198.
Cao, X. et Jahazi, M..
2005.
« Examination and verification of the filtration mechanism of cake mode during the pressure filtration tests of liquid Al–Si cast alloys ».
Materials Science and Engineering A, vol. 408, nº 1–2.
pp. 234-242.
Cao, X. et Jahazi, M..
2007.
« Friction stir processing of sand-cast aerospace magnesium alloy Ze41A-T5 ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
pp. 169-182.
Canadian Institute of Mining, Metallurgy and Petroleum.
Cao, X. et Jahazi, M..
2008.
« Overview of friction stir and laser welding techniques for lightweight alloys ».
Canadian Welding Association Journal.
pp. 19-30.
Cao, X., Jahazi, M., Afrin, N. et Chen, D. L..
2008.
« Fatigue properties of friction stir welded AZ31B magnesium alloy ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 377-389.
Canadian Institute of Mining Metallurgy & Petroleum.
Cao, X., Jahazi, M., Al-Kazzaz, H. et Medraj, M..
2008.
« Modelling of work-hardening behaviour for laser welded magnesium alloy ».
International Journal of Materials Research, vol. 99, nº 2.
pp. 216-221.
Cao, X., Jahazi, M., Fournier, J. et Alain, M..
2008.
« Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings ».
Journal of Materials Processing Technology, vol. 205, nº 1–3.
pp. 322-331.
Cao, X., Jahazi, M., Guerin, M. et Mishra, R. S..
2007.
« Friction stir welding of an aerospace magnesium alloy ».
In Friction Stir Welding and Processing IV (Orlando, FL, USA, Feb. 25-Mar. 1, 2007)
pp. 213-222.
Warrendale, PA : The Minerals, Metals & Materials Society.
Cao, X., Jahazi, M., Immarigeon, J. P. et Wallace, W..
2006.
« A review of laser welding techniques for magnesium alloys ».
Journal of Materials Processing Technology, vol. 171, nº 2.
pp. 188-204.
Cao, X., Jahazi, M. et Mehta, R..
2006.
« Friction stir welding of AZ31B-H24 magnesium alloy butt joints ».
In 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006)
pp. 279-289.
TWI Ltd.
Cao, X., Rivaux, B., Jahazi, M. C., Cuddy, J. et Birur, A..
2008.
« Effect of joint gap on Inconel 718 alloy quality welded using 4 kW continuous wave ND:YAG laser ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 313-324.
Canadian Institute of Mining Metallurgy & Petroleum.
Cao, X., Rivaux, B., Jahazi, M., Cuddy, J. et Birur, A..
2009.
« Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser ».
Journal of Materials Science, vol. 44, nº 17.
pp. 4557-4571.
Cao, X., Xiao, M. et Jahazi, M..
2004.
« Continuous wave Nd: YAG laser welding of ZE41 A-T5 magnesium sand castings: conduction or keyhole mode ».
In Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004)
pp. 187-197.
Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.
Cao, X., Xiao, M. et Jahazi, M..
2006.
« Effect of processing parameters on laser cladding of magnesium alloy castings ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 147-158.
Canadian Institute of Mining, Metallurgy and Petroleum.
Cao, X., Xiao, M., Jahazi, M., Fournier, J. et Alain, M..
2008.
« Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method ».
Materials and Manufacturing Processes, vol. 23, nº 4.
pp. 413-418.
Cao, X., Xiao, M., Jahazi, M. et Immarigeon, J. P..
2005.
« Continuous wave ND:YAG laser welding of sand-cast ZE41A-T5 magnesium alloys ».
Materials and Manufacturing Processes, vol. 20, nº 6.
pp. 987-1004.
Cao, X., Xiao, M., Jahazi, M. et Lin, Y. L..
2005.
« Nd:YAG laser welding of magnesium alloy castings ».
In Magnesium Technology 2005: Proceedings of the Symposium Held During the 2005 TMS Annual Meeting in San Francisco, California, U.S.A., February 13-17, 2005 (San Francisco, CA, USA, Feb. 13-17, 2005)
pp. 441-443.
The Minerals, Metals & Materials Society.
Cao, X., Xiao, M., Jahazi, M. et Shariff, T..
2006.
« Surface cladding of magnesium alloy castings using Nd:YAG laser ».
In Magnesium technology 2006 : proceedings of the symposium held during the TMS 2006 annual meeting in San Antonio, Texas, USA, March 12-16, 2006 (San Antonio, TX, USA, Mar. 12-16, 2006)
pp. 359-364.
Warrendale, Pa : The Minerals, Metals & Materials Society.
Cao, Xinjin, Debaecker, Guillaume, Jahazi, Mohammad, Marya, Surendar, Cuddy, Jonathan et Birur, Anand.
2010.
« Effect of post-weld heat treatment on Nd: YAG laser welded Ti-6Al-4V alloy quality ».
In THERMEC 2009
Coll. « Materials Science Forum », vol. 638-642.
pp. 3655-3660.
Trans Tech Publications Ltd.
Cao, Xinjin et Jahazi, Mohammad.
2010.
« Friction stir welding of dissimilar AA 2024-T3 to AZ31B-H24 alloys ».
In THERMEC 2009 Supplement (Berlin, Germany
Coll. « Materials Science Forum », vol. 638-642.
pp. 3661-3666.
Berlin, Germany : Trans Tech Publications Ltd.
Cao, Xinjin et Jahazi, Mohammad.
2007.
« New analyses of pressure filtration curves of Al alloys: a case study ».
In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006)
Coll. « Materials Science Forum », vol. 539-543.
pp. 351-356.
Vancouver, Canada : Trans Tech Publications Ltd.
Carneiro, Thiago Bruno, Rodrigues, Samuel Filgueiras, Aranas, Clodualdo, Siciliano, Fulvio, Silva, Eden Santos, Reis, Gedeon Silva, Miranda, Edson Jansen Pedrosa, Leal, Valdemar Silva, Jahazi, Mohammad et Jonas, John Joseph.
2020.
« Retransformation of dynamically induced ferrite during physical simulation of Steckel mill hot rolling ».
Journal of Materials Research and Technology, vol. 9, nº 5.
pp. 10254-10264.
Chadha, K., Ahmed, Z., Aranas, C., Shahriari, D. et Jahazi, M..
2018.
« Influence of strain rate on dynamic transformation of austenite in an as-cast medium-carbon low-alloy steel ».
Materialia, vol. 1.
pp. 155-167.
Chadha, K., Aranas, C. et Jahazi, M..
2021.
« Effect of double hit hot deformation on the evolution of dynamically transformed ferrite ».
Metals and Materials International, vol. 27, nº 11.
pp. 4307-4321.
Chadha, K., Aranas, C., Shahriari, D., Jahazi, M. et Spray, J. G..
2020.
« The effect of retained work hardening on the driving force for dynamic transformation ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 51, nº 11.
pp. 5617-5622.
Chadha, K., Jahazi, M. et Spray, John G..
2019.
« Effect of strain rate on the columnar to equiaxed transition in an as-cast medium-carbon low-alloy steel during hot deformation ».
In Materials Science and Technology (MS&T19) (Portland, OR, USA, Sept. 29-Oct. 3, 2019)
pp. 431-438.
Materials Science and Technology.
Chadha, K., Shahriari, D. et Jahazi, M..
2016.
« Constitutive modelling of ingot breakdown process of low alloy steels ».
Metallurgia Italiana, vol. 108, nº 4.
pp. 5-12.
Chadha, K., Shahriari, D. et Jahazi, M..
2015.
« Constitutive modelling of ingot breakdown process of low alloy steels ».
In 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2015) (Bardolino, Italy, Sept. 23-25, 2015)
Associazione Italiana di Metallurgia.
Chadha, K., Shahriari, D., Tremblay, R., Bhattacharjee, P. P. et Jahazi, M..
2017.
« Deformation and recrystallization behavior of the cast structure in large size, high strength steel ingots: Experimentation and modeling ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48, nº 9.
pp. 4297-4313.
Chadha, K., Shahriari, Davood, Aranas, C. Jr., Lapierre-Boire, Louis-Philippe et Jahazi, Mohammad.
2019.
« On the role of chromium in dynamic transformation of austenite ».
Metals and Materials International, vol. 25, nº 3.
pp. 559-569.
Chadha, Kanwal, Bhattacharjee, Pinaki Prasad et Jahazi, Mohammad.
2015.
« The effect of strain reversal during high pressure torsion on the microstructure evolution and texture of aluminum alloys ».
In Characterization of Minerals, Metals, and Materials 2015 - TMS 2015 144th Annual Meeting and Exhibition, March 15, 2015 - March 19, 2015 (Orlando, FL, USA, March 15-19, 2015)
Coll. « TMS Annual Meeting »
pp. 107-114.
Minerals, Metals and Materials Society.
Chadha, Kanwal et Jahazi, Mohammad.
12 mars 2019.
« Approche atomistique de la transformation de l’acier ».
[Article de recherche]. Substance ÉTS.
Chadha, Kanwal et Jahazi, Mohammad.
12 mars 2019.
« Atomistic Approach in Steel Transformation ».
[Article de recherche]. Substance ÉTS.
Chadha, Kanwal, Jahazi, Mohammad, Loucif, Abdelhalim et Shahriari, Davood.
2015.
« Effect of deformation temperature and interpass time on microstructure evolution and mechanical properties of medium carbon low alloy steel during ingot breakdown process ».
In 2015 TMS Annual Meeting & Exhibition : Phase Transformations and Microstructural Evolution (Orlando, FL, Canada, Mar. 15-19, 2015)
Chadha, Kanwal, Shahriari, Davood et Jahazi, Mohammad.
2017.
« An approach to develop hansel-spittel constitutive equation during ingot breakdown operation of low alloy steels ».
In Frontiers in Materials Processing, Applications, Research and Technology : Select Proceedings of FiMPART 2015 (Hyderabad, India, June 12-15, 2015)
pp. 239-246.
Springer.
Chadha, Kanwal, Shahriari, Davood et Jahazi, Mohammad.
2016.
« Modeling metadynamic recrystallization of a die steel during ingot breakdown process ».
In NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes (Troyes, France, July 04-07, 2016)
Coll. « MATEC Web Conferences », vol. 80.
EDP Sciences.
Chaieb, Oussama, Olufayo, Oluwole A., Songmene, Victor et Jahazi, Mohammad.
2020.
« Investigation on surface quality of a rapidly solidified Al–50%Si alloy component for deep-space applications ».
Materials, vol. 13, nº 15.
Chamanfar, A., Chentouf, S. M., Jahazi, M. et Lapierre-Boire, L. P..
2020.
« Austenite grain growth and hot deformation behavior in a medium carbon low alloy steel ».
Journal of Materials Research and Technology, vol. 9, nº 6.
pp. 12102-12114.
Chamanfar, A., Jahazi, M., Bonakdar, A., Morin, E. et Firoozrai, A..
2015.
« Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades ».
Materials Science and Engineering: A, vol. 642.
pp. 230-240.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2014.
« Evolution of flow stress and microstructure during isothermal compression of Waspaloy ».
Materials Science and Engineering A, vol. 615.
pp. 497-510.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2012.
« Maximizing the integrity of linear friction welded Waspaloy ».
Materials Science and Engineering A, vol. 555.
pp. 117-130.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2011.
« Mechanical property and microstructure of linear friction welded WASPALOY ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 42, nº 3.
pp. 729-744.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2012.
« Suppressed liquation and microcracking in linear friction welded WASPALOY ».
Materials and Design, vol. 36.
pp. 113-122.
Chamanfar, A., Jahazi, M., Yue, S., Gholipour, J. et Wanjara, P..
2009.
« Linear friction welding behavior of Waspaloy ».
In Materials Science and Technology Conference and Exhibition 2009, MS and T'09 (Pittsburgh, PA, USA, Oct. 25-29, 2009)
pp. 2511-2522.
Association for Iron and Steel Technology.
Chamanfar, A., Jahazi, Mohammad et Cormier, J..
2015.
« A review on inertia and linear friction welding of Ni-based superalloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 46, nº 4.
pp. 1639-1669.
Chamanfar, A., Jahazi, Mohammad, Gholipour, J., Wanjara, P. et Yue, S..
2015.
« Analysis of integrity and microstructure of linear friction welded Waspaloy ».
Materials Characterization, vol. 104.
pp. 149-161.
Chamanfar, A., Sarrat, L., Jahazi, M., Asadi, M., Weck, A. et Koul, A. K..
2013.
« Microstructural characteristics of forged and heat treated Inconel-718 disks ».
Materials and Design, vol. 52.
pp. 791-800.
Chamanfar, Ahmad, Jahazi, Mohammad, Gholipour, Javad, Wanjara, Priti et Yue, Stephen.
2013.
« Modeling grain size and strain rate in linear friction welded Waspaloy ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 44, nº 9.
pp. 4230-4238.
Chamanfar, Ahmad, Monajati, Hossein, Rosenbaum, Alex, Jahazi, Mohammad, Bonakdar, Ali et Morin, Eric.
2017.
« Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ».
Materials Characterization, vol. 132.
pp. 53-68.
Chegini, M., Aboutalebi, M. R., Seyedein, S. H., Ebrahimi, G. R. et Jahazi, M..
2020.
« Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map ».
Journal of Manufacturing Processes, vol. 56.
pp. 916-927.
Chentouf, S. M., Belhadj, T., Bombardier, N., Brodusch, N., Gauvin, R. et Jahazi, M..
2017.
« Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 2929-2937.
Chentouf, S. M., Jahazi, M., Lapierre-Boire, L. P. et Godin, S..
2014.
« Characteristics of austenite transformation during post forge cooling of large-size high strength steel Ingots ».
Metallography, Microstructure, and Analysis, vol. 3, nº 4.
pp. 281-297.
Chentouf, Samir Mourad, Belhadj, T., Bombardier, N. et Jahazi, M..
2015.
« Influence of reduction rate on the characteristics of cavities in superplastically formed 5083 aluminum alloy ».
In 54th annual conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)
Chentouf, Samir Mourad, Jahazi, Mohammad et Fortin, Rejean.
2014.
« Influence of the quench process on microstructure evolution in a landing gear steel ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME).
Chunping, Zhang, Loucif, Abdelhalim, Jahazi, Mohammad et Morin, Jean Benoit.
2022.
« FEM simulation of the effect of mold initial temperature on carbon macrosegregation in large-size steel ingots ».
In 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap (Kyoto, Japan - En ligne, Oct. 14-17, 2021)
Coll. « Materials Science Forum », vol. 1053.
pp. 258-263.
Trans Tech Publications.
Coman, E., Dubourg, L., Jahazi, M. et Ghosh, K..
2007.
« A study of the deformation and residual stresses in an aircraft fuselage panel joined by friction stir welding ».
In Proceedings of the 23rd ISPE Internaional Conference on CAD/CAM Robotics and Factories of the Future -CARS & FOF'07 (Bogota, Colombia, Aug. 16-18, 2007)
Universidad Militar Nueva Granada.
Coman, E., Ghosh, K., Jahazi, M. et Dubourg, L..
2009.
« A study of the deformation and residual stress in an aircraft fuselage panel welded by friction stir welding ».
International Journal of Advanced Manufacturing System, vol. 11, nº 2.
pp. 75-84.
Dadaei, Mostafa, Omidvar, Hamid, Bagheri, Behrouz, Jahazi, Mohammad et Abbasi, Mahmoud.
2014.
« The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy ».
International Journal of Materials Research, vol. 105, nº 4.
pp. 369-374.
Dalgaard, E., Coghe, F., Rabet, L., Jahazi, M., Wanjara, P. et Jonas, J. J..
2010.
« Texture evolution in linear friction welded Ti-6Al-4V ».
In THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009)
Coll. « Advanced Materials Research », vol. 89-91.
pp. 124-129.
Berlin, Germany : Trans Tech Publications.
Dalgaard, E., Jahazi, Mohammad, Merati, Ali et Wanjara, P..
2009.
« Mechanical properties of linear friction welded Ti-6-4V alloy ».
In XIX International Symposium on Air Breathing Engines 2009 : (ISABE 2009) : Montreal, Canada, 7-11 September 2009 (Montreal, QC, Canada, Sept. 7-11, 2009)
pp. 1416-1424.
American Institute of Aeronautics and Astronautics.
Dalgaard, E., Wanjara, P., Trigo, G., Jahazi, M., Comeau, G. et Jonas, J. J..
2011.
« Linear friction welding of Al-Cu Part 2 - interfacial characteristics ».
Canadian Metallurgical Quarterly, vol. 50, nº 4.
pp. 360-370.
Dhondapure, Prashant, Tize Mha, Pierre, Nayak, Soumyaranjan, Ebacher, Lea, Dourandish, Simin, Champliaud, Henri, Morin, Jean -Benoit et Jahazi, Mohammad.
2023.
« Influence of deformation path on the stress state and damage evolution along the central axis of a large size forged ingot of AISI H13 steel ».
Journal of Materials Research and Technology, vol. 27.
pp. 8244-8257.
Djahazi, M., He, X. L. et Jonas, J. J..
1990.
« Acceleration of Nb(C, N) precipitation in HSLA steels by boron addition ».
In HSLA steels, processing, properties and applications: proceedings of the Second International Conference on HSLA Steels October 28th-November 2nd, 1990, Beijing, China (Beijing, China, Oct. 28-Nov. 2, 1990)
pp. 230-238.
Djahazi, M., He, X. L. et Jonas, J. J..
1988.
« Effect of boron on the kinetics of precipitation in deformed austenite ».
In Thermec-88: International Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals: proceedings, June 6-10, 1988, Keidanren Kaikan, Tokyo, Japan (Tokyo, Japan, June 6-10, 1988)
pp. 246-253.
Iron and Steel Institute of Japan.
Djahazi, M., He, X. L. et Jonas, J. J..
1987.
« Effect of boron on the precipitation of carbonitrides in a Nb-Ti HSLA steel ».
In 29th Mechanical Working and Steel Processing Conference: proceedings (Toronto, ON, Canada, Oct. 21-23, 1987)
pp. 403-408.
Djahazi, M., He, X. L., Jonas, J. J. et Collins, L..
1990.
« The effect of Nb and b on austenite recrystallization ».
In Recrystallization '90: International Conference on Recrystallization in Metallic Materials: conference proceedings (Wollongong, Australia, Jan. 22-26, 1990)
pp. 681-687.
TMS (The Minerals, Metals & Materials Society).
Djahazi, M., He, X. L., Jonas, J. J. et Ruddle, G. E..
1988.
« Influence of boron distribution on recrystallization and precipitation in a Nb-Ti HSLA steel ».
In Processing, microstructure, and properties of HSLA steels: proceedings of an International Symposium on Processing, Microstructure, and Properties of HSLA Steels (Pittsburgh, PA, USA, Nov. 3-5, 1987)
pp. 69-78.
Djahazi, M., He, X. L., Jonas, J. J. et Sun, W. P..
1992.
« Influence of boron on nature and distribution of strain induced precipitates in (Ti,Nb) high strength low alloy steels ».
Materials Science and Technology, vol. 8, nº 7.
pp. 628-636.
Djahazi, M., He, X. L., Jonas, J. J. et Sun, W. P..
1992.
« Nb(C, N) Precipitation and Austenite Recrystallization in Boron-containing high-strength low-alloy steels ».
Metallurgical transactions. A, Physical metallurgy and materials science, vol. 23 A, nº 8.
pp. 2111-2120.
Dourandish, S., Jahazi, M., Ebrahimi, G. R. et Ebacher, L..
2021.
« Influence of eutectic phase precipitation on cracking susceptibility during forging of a martensitic stainless steel for turbine shaft applications ».
Journal of Materials Research and Technology, vol. 13.
pp. 260-270.
Dourandish, Simin, Champliaud, Henri, Morin, Jean -Benoit et Jahazi, Mohammad.
2022.
« Microstructure-based finite element modeling of a martensitic stainless steel during hot forging ».
International Journal of Advanced Manufacturing Technology, vol. 123, nº 7-8.
pp. 2833-2851.
Dubourg, L., Amargier, R. et Jahazi, M..
2008.
« Relationship between FSW parameters, hardness and tensile properties of 7075-T6 and 2098-T851 similar but welds ».
In 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008)
TWI Ltd.
Dubourg, L., Doran, P., Larose, S., Gharghouri, M. A. et Jahazi, M..
2010.
« Prediction and measurements of thermal residual stresses in AA2024-T3 friction stir welds as a function of welding parameters ».
In THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009)
Coll. « Materials Science Forum », vol. 638-642.
pp. 1215-1220.
Berlin, Germany : Trans Tech Publications Ltd.
Dubourg, L., Gagnon, F. O., Nadeau, F., St-Georges, L. et Jahazi, M..
2006.
« Process window optimization for FSW of thin and thick sheet Al alloys using statistical methods ».
In 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006)
pp. 419-430.
TWI.
Dubourg, L., Gholipour, J. et Jahazi, M..
2009.
« Friction stir welding of 2024-T3 aluminum tubes for hydroforming application ».
In Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008)
pp. 549-556.
ASM International.
Dubourg, L., Jahazi, M., Dezaise, G. et Bocher, P..
2006.
« Microstructure and mechanical characterisation of FSW 7075-T6 lap joints ».
In Aerospace Materials and Manufacturing: Emerging Materials, Processes, and Repair Techniques (Montréal, Canada, Oct.1-4, 2006)
pp. 107-120.
Canadian Institute of Mining, Metallurgy and Petroleum.
Dubourg, L., Merati, A., Gallant, M. et Jahazi, M..
2008.
« Manufacturing of aircraft panels by friction stir lap welding of 7075-T6 stringers on 2024-T3 skin: process optimization and mechanical properties ».
In 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008)
TWI Ltd.
Dubourg, L., Merati, A. et Jahazi, M..
2010.
« Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin ».
Materials and Design, vol. 31, nº 7.
pp. 3324-3330.
Dupont-Marillia, Frederic, Jahazi, Mohammad et Belanger, Pierre.
2019.
« Live imaging using TFM in a 30-inch forged steel block ».
In ASNT Annual Conference 2019 (Las Vegas, NV, USA, Nov. 18-21, 2019)
ASNT.
Dupont-Marillia, Frederic, Jahazi, Mohammad et Bélanger, Pierre.
2018.
« Phased array inspection of large size forged steel parts ».
In 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017)
Coll. « AIP Conference Proceedings », vol. 1949.
American Institute of Physics.
Dupont-Marillia, Frederic, Jahazi, Mohammad et Belanger, Pierre.
2021.
« Phased array probe for the inspection of large steel forgings ».
Cogent Engineering, vol. 8, nº 1.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Belanger, Pierre.
2019.
« Design and optimisation of a phased array transducer for ultrasonic inspection of large forged steel ingots ».
NDT and E International, vol. 103.
pp. 119-129.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Belanger, Pierre.
2019.
« Influence of local mechanical parameters on ultrasonic wave propagation in large forged steel ingots ».
Journal of Nondestructive Evaluation, vol. 38, nº 3.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Bélanger, Pierre.
2017.
« Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ».
In 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016)
Coll. « AIP Conference Proceedings », vol. 1806.
USA : American Institute of Physics.
Ebacher, L., Jahazi, M., Morin, J. B. et Ritchey, B..
2022.
« Thermomechanical study of H13 hot forged bars ».
In 4th International Ingot Casting Rolling Forging, ICRF 2022 - Conference Proceedings (Pittsburgh, PA, USA, June 21-23, 2022)
pp. 26-37.
Association for Iron and Steel Technology, AISTECH.
Ebrahimi, G. R., Momeni, A., Ezatpour, H. R., Jahazi, M. et Bocher, P..
2019.
« Dynamic recrystallization in Mone1400 Ni-Cu alloy: mechanism and role of twinning ».
Materials Science and Engineering : A, vol. 744.
pp. 376-385.
Ebrahimi, Gholam Reza, Momeni, Amir, Jahazi, Mohammad et Bocher, Philippe.
2014.
« Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 45, nº 4.
pp. 2219-2231. Eres-Castellanos, Adriana, Hidalgo, Javier, Zorgani, Muftah, Jahazi, Mohammad, Toda-Caraballo, Isaac, Caballero, Francisca G. et Garcia, Mateo. 2019. « On the control of the scale of nanobainitic microstructures by prior austenite strengthening ». Communication lors de la conférence : European Congress and Exhibition on Advanced Materials and Processes (EUROMAT) (Stockholm, Sweden, Sept. 01-05, 2019).
Eres-Castellanos, Adriana, Hidalgo, Javier, Zorgani, Muftah, Jahazi, Mohammad, Toda-Caraballo, Isaac, Caballero, Francisca G. et Garcia-Mateo, Carlos.
2021.
« Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach ».
Materials & Design, vol. 197.
Eres-Castellanos, Adriana, Zorgani, Muftah, Shahriari, Davood, Romanica, Radu, Jimenez, Jose Antonio, Garcia-Mateo, Carlos et Jahazi, Mohammad.
2022.
« Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel ».
Journal of Materials Research and Technology, vol. 18.
pp. 3428-3442.
Fairman, M., Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2007.
« Microstructural and microhardness evolution of friction stir processing AZ31B-H24 magnesium alloy ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
pp. 117-128.
Canadian Institute of Mining, Metallurgy and Petroleum.
Fairman, M., Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2007.
« Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy ».
Canadian Metallurgical Quarterly, vol. 46, nº 4.
pp. 425-432.
Fall, A., Jahazi, M., Khodabandeh, A. R. et Fesharakib, M. H..
2017.
« Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8.
pp. 2919-2931.
Fall, A., Monajati, H., Khodabandeh, A., Fesharaki, M. H., Champliaud, H. et Jahazi, M..
2019.
« Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ».
Materials Science and Engineering: A, vol. 749.
pp. 166-175.
Fall, Ameth, Fesharaki, Mostafa Hashemi, Khodabandeh, Ali Reza et Jahazi, Mohammad.
2016.
« Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints ».
Metals, vol. 6, nº 11.
pp. 275-286.
Fayed, Eslam M., Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2023.
« Effect of microwave hybrid heat treatment on the microstructure and hardness of 3D printed Inconel 718 superalloy ».
Canadian Metallurgical Quarterly.
Fayed, Eslam M., Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2022.
« Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling ».
Materials Science and Engineering A, vol. 838.
Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2021.
« Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ».
Scientific Reports, vol. 11, nº 1.
Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2021.
« Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ».
Metals, vol. 11, nº 1.
Fayed, Eslam M., Shahriari, Davood, Saadati, Mohammad, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2020.
« Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ».
Materials, vol. 13, nº 11.
Fayed, Eslam, Medraj, Mamoun, Shahriari, Davood, Jahazi, Mohammad et Brailovski, Vladimir.
2019.
« Effect of heat treatment holding time on the microstructure and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting ».
In Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Western University - Department of Mechanical and Materials Engineering.
Feujofack Kemda, B. V., Barka, N., Jahazi, M. et Osmani, D..
2021.
« Modeling of phase transformation kinetics in resistance spot welding and investigation of effect of post weld heat treatment on weld microstructure ».
Metals and Materials International, vol. 27, nº 5.
pp. 1205-1223.
Feujofack Kemda, B. V., Barka, N., Jahazi, M. et Osmani, D..
2022.
« Multi-objective optimization of process parameters in resistance spot welding of A36 mild steel and hot dipped galvanized steel sheets using non-dominated sorting genetic algorithm ».
Metals and Materials International, vol. 28, nº 2.
pp. 487-502.
Feujofack Kemda, B. V., Barka, Noureddine, Jahazi, M. et Osmani, D..
2020.
« Optimization of resistance spot welding process applied to A36 mild steel and hot dipped galvanized steel based on hardness and nugget geometry ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 5-6.
pp. 2477-2491.
Fredj, Emna Ben, Nanesa, Hadi Ghasemi, Shahriari, Davood, Morin, Jean-Benoit et Jahazi, Mohammad.
2017.
« Effect of cooling rate on phase transformation and microstructure evolution in a large size forged ingot of medium carbon low alloy steel ».
In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-March 2, 2017)
Coll. « The Minerals, Metals & Materials Series »
pp. 413-423.
Springer International Publishing.
Geisler, Antoine, Sadeghifar, Morteza, Morin, Jean -Benoit, Loucif, Abdelhalim et Jahazi, Mohammad.
2023.
« Void closure during open die forging of large size martensitic stainless-steel ingots: an experimental-analytical-numerical study ».
International Journal of Material Forming, vol. 16, nº 1.
Gemme, F., Verreman, Y., Dubourg, L. et Jahazi, M..
2008.
« Friction stir welding of 7075 aluminium alloy : finite element modelling of the dwell phase ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 77-86.
Canadian Institute of Mining Metallurgy & Petroleum.
Gemme, F., Verreman, Y., Dubourg, L. et Jahazi, M..
2010.
« Numerical analysis of the dwell phase in friction stir welding and comparison with experimental data ».
Materials Science and Engineering A, vol. 527, nº 16-17.
pp. 4152-4160.
Germain, L., Gey, N., Humbert, M., Bocher, P. et Jahazi, M..
2003.
« Texture and microtexture analysis of an IMI 834 alloy after thermo-mechanical processing ».
In Ti-2003 Science and Technology : proceedings of the 10th World Conference on Titanium held at the CCH-Congress Center Hamburg, Germany, 13-18 July 2003 (Hamburg, Germany, July 13-18, 2003)
pp. 1283-1290.
Weinheim, Allemagne : Wiley-VCH.
Germain, L., Gey, N., Humbert, M., Bocher, P. et Jahazi, M..
2005.
« β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ».
In Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005)
Coll. « Materials Science Forum », vol. 495-497.
pp. 663-668.
Trans Tech Publications.
Germain, L., Gey, N., Humbert, M., Hazotte, A., Bocher, P. et Jahazi, M..
2005.
« An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ».
Materials Characterization, vol. 54, nº 3.
pp. 216-222.
Germain, L., Gey, N., Humbert, M., Vo, P., Jahazi, M. et Bocher, Philippe.
2008.
« Texture heterogeneities induced by subtransus processing of near alpha titanium alloys ».
Acta Materialia, vol. 56, nº 16.
pp. 4298-4308.
Germain, Lionel, Gey, Nathalie, Humbert, Ludovic, Bocher, Philippe et Jahazi, Mohammad.
2005.
« Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ».
Acta Materialia, vol. 53, nº 13.
pp. 3535-3543.
Germain, Lionel, Vo, Phuong, Gey, Nathalie, Jahazi, Mohammad, Humbert, Michel et Bocher, Philippe.
2007.
« Development of sharp local α microtextures during α/β thermo-mechanical processing of TIMETAL 834 ».
In 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007)
pp. 925-928.
Warrendale, USA : Minerals, Metals and Materials Society.
Ghasemi Nanesa, H. et Jahazi, Mohammad.
2015.
« Alternative phase transformation path in cryogenically treated AISI D2 tool steel ».
Materials Science and Engineering: A, vol. 634.
pp. 32-36.
Ghasemi-Nanesa, Hadi et Jahazi, Mohammad.
2014.
« Simultaneous enhancement of strength and ductility in cryogenically treated AISI D2 tool steel ».
Materials Science and Engineering A, vol. 598.
pp. 413-419.
Ghasemi-Nanesa, Hadi, Jahazi, Mohammad, Heidari, Majid et Levasseur, Tom.
2017.
« The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel ».
In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017)
Coll. « AIP Conference Proceedings », vol. 1896.
USA : American Institute of Physics.
Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Naraghi, Reza.
2015.
« Martensitic transformation in AISI D2 tool steel during continuous cooling to 173K ».
Journal of Materials Science, vol. 50, nº 17.
pp. 5758-5768.
Ghasemi-Nanesa, Hadi, Jahazi, Mohammad, Trigo, Gil et Levasseur, Tom.
2014.
« Influence of cryogenic treatment on microstructure characteristics and mechanical properties of AISI D2 tool steel ».
In TMS 2014 Supplemental Proceedings
pp. 991-997.
Hoboken, NJ, USA : John Wiley & Sons, Inc..
Ghasemi-Nanesa, Hadi, Touazine, Heithem et Jahazi, Mohammad.
2016.
« Influence of cryogenic process parameters on microstructure and hardness evolution of AISI D2 tool steel ».
International Journal of Advanced Manufacturing Technology, vol. 85, nº 1.
pp. 881-890.
Ghodrati, Neda, Baiteche, Mounir, Loucif, Abdelhalim, Gallego, Paloma Isabel, Jean-Benoit, Morin et Jahazi, Mohammad.
2022.
« Influence of hot top height on macrosegregation and material yield in a large-size cast steel ingot using modeling and experimental validation ».
Metals, vol. 12, nº 11.
Ghodrati, Neda, Loucif, Abdelhalim, Morin, Jean -Benoit et Jahazi, Mohammad.
2022.
« Modeling of the influence of hot top design on microporosity and shrinkage cavity in large-size cast steel ingots ».
In 8th International Congress on the Science and Technology of Steelmaking (Montreal, QC, Canada, Aug. 02-04, 2022)
pp. 239-244.
Association for Iron & Steel Technology.
Gholipour, J. et Jahazi, M..
2006.
« Effect of lubricant in hydroforming of Ni-based super alloy tubes ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 447-460.
Canadian Institute of Mining, Metallurgy and Petroleum.
Gholipour, J. et Jahazi, M..
2008.
« Evaluation of lubricants in hydroforming of aerospace materials ».
In Plasticity 2008 (Kailua-Kona, HI, USA, Jan. 2-5, 2008)
Goudarzi, M., Jahazi, M. et Fallahi, A..
1995.
« The influence of recrystallization temperature on the earing of a 1100 aluminum alloy ».
In Proceedings of the International Manufacturing Conference (Tehran, Iran, 1995)
pp. 179-186.
Grewal, Rupanjit, Aranas, Clodualdo, Chadha, Kanwal, Shahriari, Davood, Jahazi, Mohammad et Jonas, John J..
2016.
« Formation of Widmanstatten ferrite at very high temperatures in the austenite phase field ».
Acta Materialia, vol. 109.
pp. 23-31.
Guo, Baoqi, Aranas, Clodualdo, Foul, Anes, Ji, Xiankun, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2018.
« Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ».
Materials Science and Engineering A, vol. 729.
pp. 119-124.
Guo, Baoqi, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2018.
« Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 49, nº 12.
pp. 5956-5961.
Habassi, Faiçal, Houria, Manel, Barka, Noureddine et Jahazi, Mohammad.
2023.
« Influence of post-treatment on microstructure and mechanical properties of additively manufactured C300 maraging steel ».
Materials Characterization, vol. 202.
Haghshenas, M., Zarei-Hanzaki, A. et Jahazi, M..
2009.
« An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy ».
Materials Characterization, vol. 60, nº 8.
pp. 817-823.
Harris, Nathan, Shahriari, Davood et Jahazi, Mohammad.
2016.
« Analysis of void closure during open die forging process of large size steel ingots ».
In 16th Metal Forming International Conference (Krakow, Poland, Sept. 18-21, 2016)
Coll. « Key Engineering Materials », vol. 716.
pp. 579-585.
Harris, Nathan, Shahriari, Davood et Jahazi, Mohammad.
2017.
« Development of a fast converging material specific void closure model during ingot forging ».
Journal of Manufacturing Processes, vol. 26.
pp. 131-141.
He, X. L., Djahazi, M., Jonas, J. J. et Jackman, J..
1991.
« The non-equilibrium segregation of boron during the recrystallization of Nb-treated HSLA steels ».
Acta Metallurgica et Materialia, vol. 39, nº 10.
pp. 2295-2308.
Heddar, Mohamed Imad Eddine, Mehdi, Brahim, Matougui, Nedjoua, Tahan, Souheil Antoine et Jahazi, Mohammad.
2024.
« Adaptable multi-objective optimization framework: Application to metal additive manufacturing ».
International Journal of Advanced Manufacturing Technology.
Hesamodin Talebi, S., Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Melkonyan, Haikouhi.
2017.
« In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ».
Metals, vol. 7, nº 9.
Hossein Nedjad, S. et Jahazi, M..
2000.
« Failure analysis and manufacturing technology of seal strips ».
In Proceedings of the 4th International Manufacturing Conference (Tehran, Iran
pp. 285-292.
Hosseinpour, M. et Jahazi, M..
1994.
« Optimum welding of AISI 4130 steel ».
In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
pp. 214-221.
Hosseinpour, M. et Jahazi, M..
1994.
« The influence of welding parameters on the HAZ microstructure of an ultra high strength steel ».
In International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94) : 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
pp. 120-127.
Houria, Manel, Matougui, Nedjoua, Mehdi, Brahim, Kherrouba, Nabil et Jahazi, Mohammad.
2022.
« Effect of plastic anisotropy on the kinetics of static softening in AA2024-T3 aluminum alloy ».
Metals and Materials International, vol. 28.
pp. 2042-2058.
Humbert, Michel, Germain, L., Gey, N., Bocher, Philippe et Jahazi, M..
2006.
« Study of the variant selection in sharp textured regions of bimodal IMI 834 billet ».
Materials Science and Engineering : A, vol. 430, nº 1-2.
pp. 157-164.
Jahazi, M..
1998.
« The influence of thermomechanical treatment on the microstructure and mechanical properties of aisi 4130 steel ».
Metals and Materials, vol. 4, nº 4.
pp. 818-822.
Jahazi, M. et Ebrahimi, G..
1998.
« Flow localization during the forming of an ultra high strength steel ».
In Proceedings of the Sixth Annual ISME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)
pp. 1445-1452.
Jahazi, M. et Ebrahimi, G..
2000.
« Influence of flow-forming parameters and microstructure on the quality of a D6ac steel ».
Journal of Materials Processing Technology, vol. 103, nº 3.
pp. 362-366.
Jahazi, M. et Egbali, B..
2000.
« Influence of hot rolling parameters on the microstructure and mechanical properties of an ultra-high strength steel ».
Journal of Materials Processing Technology, vol. 103, nº 2.
pp. 276-279.
Jahazi, M. et Eghbali, B..
2001.
« The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels ».
Journal of Materials Processing Technology, vol. 113.
pp. 594-598.
Jahazi, M. et Ghomi, M..
1997.
« Microstructural evolution and formability in two aluminium alloys ».
In Proceedings of the Fifth Annual ISME Conference, Tabriz University, Tabriz, Iran, May 4-6, 1997 (Tabriz, Iran, May 4-6, 1997)
pp. 757-767.
Jahazi, M. et Goudarzi, M..
1997.
« The influence of thermomechanical parameters on the earing behaviour of 1050 and 1100 aluminium alloys ».
Journal of Materials Processing Technology, vol. 63.
pp. 610-613.
Jahazi, M. et Hossein-Nejad, S..
2004.
« The development of an optimum manufacturing and material selection process for the fabrication of labyrinth seal strips ».
Journal of Materials Processing Technology, vol. 152, nº 3.
pp. 272-275.
Jahazi, M. et Hosseinpour, M..
1995.
« Fracture surface analysis of a welded ultra high strength steel ».
The Metallurgist, vol. 3.
pp. 10-17.
Jahazi, M. et Jalilian, F..
1995.
« The determination of optimum fiber surface treatment for the production of Cu-Gr composites ».
In Proceedings of the Conference on Composites Materials (Tokyo, Japan, June 26, 1995)
pp. 220-228.
Japan Society of Mechanical Engineers.
Jahazi, M. et Jalilian, F..
1995.
« The influence of chemical treatments on the interface quality and physical properties of copper-graphite composites ».
In Proceedings of the Tenth International Conference on Composite Materials : Whistler, British Columbia, Canada, August 14th-18th, 1995 (Whistler, BC, Canada, Aug. 14-18, 1995)
pp. 439-446.
Jahazi, M. et Jalilian, F..
1999.
« The influence of thermochemical treatments on interface quality and properties of copper/carbon-fibre composites ».
Composites Science and Technology, vol. 59, nº 13.
pp. 1969-1975.
Jahazi, M. et Jonas, J. J..
2002.
« The non-equilibrium segregation of boron on original and moving austenite grain boundaries ».
Materials Science and Engineering A, vol. 335, nº 1-2.
pp. 49-61.
Jahazi, M., Khodabandeh, A. et Aghdashi, S. T..
2001.
« A method to improve the toughness of forged microalloyed steels ».
In Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)
pp. 3-10.
Jahazi, M. et Mashreghi, A. R..
2002.
« Dissolution and precipitation kinetics of γ' in nickel base superalloy Udimet 520 ».
Materials Science and Technology, vol. 18, nº 4.
pp. 458-462.
Jahazi, M. et Samadi, A..
1997.
« The influence of quench parameters on the microstructure and toughness of AISI 4130 steel ».
In Proceedings of the International IME Conference, Tehran, Iran, 1997 (Tehran, Iran, 1997)
pp. 195-202.
Jahazi, M., Samadi, A. et Yue, S..
2003.
« Determination of the optimum forging conditions for a 7075 aluminum alloy ».
In Light metals 2003 = Métaux légers : proceedings of the International Symposium on Light Metals 2003 Métaux légers (Vancouver, BC, Canada, Aug. 25-28, 2003)
pp. 433-444.
[Canadian Institute of Mining, Metallurgy and Petroleum].
Jahazi, Mohammad et Ghomi, M..
2000.
« Texture evolution in two deep drawn aluminum alloys ».
In J.J. Jonas Symposium on Thermomechanical Processing of Steel: August 20-23, 2000, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Aug. 20-23, 2000)
pp. 707-713.
Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.
Jalilian, F., Drew, R. A. L. et Jahazi, M..
2005.
« Joining of Inconel 617 sheets in TLP bonding using Ni - P and Ni - Si - B alloys ».
In Trends in Welding Research - Proceedings of the 7th International Conference (Pine Mountain, GA, USA, May 16-20, 2005)
pp. 873-878.
Pine Mountain, GA, United states : ASM International.
Jalilian, F., Drew, R. A. L. et Jahazi, M..
2006.
« Joining of Inconel 617 sheets using TLP bonding process with Ni-Si-B interlayer ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 315-326.
Canadian Institute of Mining, Metallurgy and Petroleum.
Jalilian, F. et Jahazi, M..
1994.
« The effect of surface treatments on the physical behavior of copper-graphite composites ».
In International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94): 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
pp. 326-334.
Jalilian, F., Jahazi, M. et Drew, R. A. L..
2006.
« Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni-Si-B filler metal ».
Materials Science and Engineering A, vol. 423, nº 1-2.
pp. 269-281.
Jalilian, F., Jahazi, M. et Drew, R. A. L..
2013.
« Microstructure evolution during transient liquid phase bonding of alloy 617 ».
Metallography, Microstructure, and Analysis, vol. 2, nº 3.
pp. 170-182.
Jalilian, F., Jahazi, M., Drew, R. A. L. et Immarigeon, J-P..
2004.
« The influence of processing parameters on TLP joining of Inconel 617 alloy ».
In 2nd International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues - Honoring William Wallace (Hamilton, ON, Canada, Aug. 22-25, 2004)
pp. 263-274.
Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.
Jalilian, F., Sedghi, A. et Jahazi, M..
1994.
« The influence of carbon fiber surface treatment on the mechanism of copper growth ».
In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
pp. 269-274.
Jalilian, F., Sedghi, A. et Jahazi, M..
1992.
« The influence of chemical surface treatment on the wettability of carbon fibers ».
In Proceedings of the International Confrence on Tribology (Isfahan, Iran, 1992)
pp. 333-349.
Javidikia, Mahshad, Sadeghifar, Morteza, Champliaud, Henri et Jahazi, Mohammad.
2023.
« Grain size and temperature evolutions during linear friction welding of Ni-base superalloy Waspaloy: Simulations and experimental validations ».
Journal of Advanced Joining Processes, vol. 8.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2021.
« 3D FE modeling and experimental analysis of residual stresses and machining characteristics induced by dry, MQL, and wet turning of AA6061-T6 ».
Machining Science and Technology, vol. 25, nº 6.
pp. 957-983. Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad. 2020. « 3D Finite element simulation of residual stresses induced by wet turning of AA6061-T6 ». Affiche numéro 49 présentée lors de la conférence : 17th Encyclopaedia Archives Encyclopaedia of Research on Aluminium in Québec REGAL Students' Day = 17e Encyclopédie de la Recherche sur l’Aluminium au Québec : Journée des étudiants du REGAL (En ligne, Nov. 05-06, 2020).
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2021.
« Analysis and optimization of surface roughness in turning of AA6061-T6 under various environments and parameters ».
In 9th CIRP Conference on High Performance Cutting (En ligne, May 24-26, 2021)
Coll. « Procedia CIRP », vol. 101.
pp. 17-20.
Elsevier.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization ».
The International Journal of Advanced Manufacturing Technology, vol. 110, nº 9.
pp. 2669-2683.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2021.
« Low and high speed orthogonal cutting of AA6061-T6 under dry and flood-coolant modes: Tool wear and residual stress measurements and predictions ».
Materials, vol. 14, nº 15.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 9-10.
4547–4565.
Jonas, John J., Aranas, Clodualdo, Fall, Ameth et Jahazi, Mohammad.
2017.
« Transformation softening in three titanium alloys ».
Materials & Design, vol. 113.
pp. 305-310.
Kaveh, Kianoosh, Morin, Jean-Benoit, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira.
2022.
« Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking ».
In 8th International Congress on the Science and Technology of Steelmaking (ICS) (Montreal, QC, Canada, Aug. 02-04, 2022)
pp. 199-206.
Association for Iron & Steel Technology.
Kavyani, M., Ebrahimi, G. R., Ezatpour, H. R. et Jahazi, M..
2022.
« Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process ».
Journal of Magnesium and Alloys, vol. 10, nº 6.
pp. 1640-1662.
Keivani, R., Jahazi, Mohammad, Pham, Tan, Khodabandeh, A. R. et Afshar, M. R..
2014.
« Predicting residual stresses and distortion during multisequence welding of large size structures using FEM ».
International Journal of Advanced Manufacturing Technology, vol. 73, nº 1-4.
pp. 409-419.
Khan, Makarim, Shahriari, Davood, Jahazi, Mohammad et Morin, Jean-Benoit.
2021.
« Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel ».
Frontiers in Mechanical Engineering, vol. 7.
Khodabandeh, A. R., Jahazi, M., Yue, S. et Aghdashi, S. T..
2006.
« The determination of optimum forging conditions for the production of high strength-high impact toughness automotive parts ».
Materials and Manufacturing Processes, vol. 21, nº 1.
pp. 105-110.
Khodabandeh, Ali Reza, Jahazi, Mohammad, Yue, Steve et Bocher, Philippe.
2005.
« Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ».
ISIJ International, vol. 45, nº 2.
pp. 272-280.
Larose, S., Dubourg, L., Perron, C., Jahazi, M. et Wanjara, P..
2010.
« Limitation of distortion in friction stir welded (FSW) panels using needle peening ».
In THERMEC 2009 (Berlin, Germany, Aug. 25-29, 2009)
Coll. « Materials Science Forum », vol. 638-642.
pp. 1203-1208.
Berlin, Germany : Trans Tech Publications Ltd.
Lévesque, D., Dubourg, L., Lord, M., Jahazi, M. et Blouin, A..
2008.
« Residual stress measurement in friction stir welds using laser ultrasonics ».
In Review of Progress in Quantitative Nondestructive Evaluation: Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation (Chicago, IL, USA, July 22-25, 2008)
Coll. « AIP Conference Proceedings », vol. 1096.
pp. 1719-1726.
AIP Publishing.
Lévesque, D., Dubourg, L., Mandache, C., Gougeon, P., Cao, X. et Jahazi, M. C..
2008.
« Assessment of friction stir welds with nondestructive methods ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 339-350.
Canadian Institute of Mining Metallurgy & Petroleum.
Levesque, D., Dubourg, L., Mandache, C., Kruger, S. E., Lord, M., Merati, A., Jahazi, M. et Monchalin, J-P..
2007.
« Synthetic aperture focusing technique for the ultrasonic evaluation of friction stir welds ».
In Review of Progresses in Quantitative Nondestructive Evaluation : 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007)
Coll. « AIP conference proceedings », vol. 975.
pp. 263-270.
AIP Publishing.
Liu, A., Chen, D. L., Bhole, S., Cao, X. et Jahazi, M..
2007.
« Corrosion behavior of the stir zone in friction stir welded dissimilar joint of 2024 aluminium to AZ31 magnesium alloys ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
pp. 129-140.
Canadian Institute of Mining, Metallurgy and Petroleum.
Liu, C., Chen, D. L., Bhole, S., Cao, X. et Jahazi, M..
2009.
« Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy ».
Materials Characterization, vol. 60, nº 5.
pp. 370-376.
Liu, J. H., Binot, N., Delagnes, D. et Jahazi, M..
2021.
« Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel ».
Journal of Materials Research and Technology, vol. 12.
pp. 234-242.
Loucif, A., Bitterlin, M., Jahazi, M., Tremblay, R., Morin, J. B. et Lapierre-Boire, L. P..
2017.
« Crack analysis in as cast large size ingot of a high strength steel ».
In 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017)
pp. 766-767.
International Conference on Fracture.
Loucif, A., Shahriari, D., Chadha, K., Jahazi, M., Tremblay, R. et Lapierre-Boire, L. P..
2017.
« Analysis of cracks and failure during solidification of a high strength low alloy steel ».
In 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017)
pp. 770-771.
International Conference on Fracture.
Loucif, Abdelhalim, Ben Fredj, Emna, Harris, Nathan, Shahriari, Davood, Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe.
2018.
« Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ».
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 49, nº 3.
pp. 1046-1055.
Loucif, Abdelhalim, Bitterlin, Matthieu, Jahazi, Mohammad, Tremblay, Rami, Morin, Jean-Benoît et Lapierre-Boire, Louis-Philippe.
2018.
« Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ».
Metallography, Microstructure, and Analysis, vol. 7, nº 2.
pp. 203-208.
Loucif, Abdelhalim, Chunping, Zhang, Morin, Jean-Benoît et Jahazi, Mohammad.
2022.
« A FEM analysis on the influence of manganese on carbon and chromium macrosegregation in large size steel ingot ».
In 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap
Coll. « Materials Science Forum », vol. 1053.
pp. 252-257.
Trans Tech Publications.
Loucif, Abdelhalim, Fredj, Emna Ben, Jahazi, Mohammad, Lapierreboire, Louis-Philippe, Tremblay, Rami et Beauvais, Raymond.
2015.
« Analysis of macrosegregation in large size forged ingot of high strength steel ».
In Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (ICS 2015) (Beijing, China, May 12-14, 2015)
pp. 1043-1046.
Chinese Society for Metals.
Loucif, Abdelhalim, Morin, Jean Benoit, Lapierre-Boire, Louis Philippe et Jahazi, Mohammad.
2021.
« Subsurface crack initiation and propagation in an open dieforged high strength steel: A microstructural analysis ».
In 9th International Conference on Engineering and Innovative Materials (ICEIM 2020) (Singapor, Singapor, Sept. 4-6, 2020)
Coll. « Key Engineering Materials », vol. 880.
pp. 29-34.
Trans Tech Publications Ltd.
Loucif, Abdelhalim, Shahriari, Davood, Chadha, Kanwal, Zhang, Chunping, Jahazi, Mohammad, Tremblay, Rami et Lapierre-Boire, Louis-Philippe.
2018.
« Cracking and failure in a high strength low alloy steel during solidification ».
In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 15-20.
Trans Tech Publications Ltd.
Loucif, Abdelhalim, Shahriari, Davood, Zhang, Chunping P., Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Tremblay, Rami.
2017.
« Macrosegregation of alloying elements in hot top of large size high strength steel ingot ».
In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 1176-1181.
Trans Tech Publications.
Loucif, Abdelhalim, Touazine, Heithem et Jahazi, Mohammad.
2018.
« Prediction of steel transformation temperatures using thermodynamic modeling and design of experiments (DOE) ».
In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 2284-2289.
Trans Tech Publications Ltd.
Loucif, Abdelhalim, Zhang, Chunping, Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe.
2020.
« Macrosegregation characteristics of ferrite and austenite stabilizer elements in large size high strength steel ingot ».
In 8th International Conference on Engineering and Innovative Materials (ICEIM 2019) (Tokyo, Japan, Sept. 06-08, 2019)
Coll. « Key Engineering Materials », vol. 846.
pp. 82-86.
Trans Tech Publications Ltd.
Lyassami, Mountadar, Shahriari, Davood, Ben Fredj, Emna, Morin, Jean-Benoit et Jahazi, Mohammad.
2018.
« Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Maamri, Ilyes, Barka, Noureddine, El Ouafi, Abderrazak et Jahazi, Mohammad.
2015.
« A sensitivity study of 4340 steel hardness profile heat-treated by laser ».
International Journal of Emerging Technology and Advanced Engineering, vol. 5, nº 9.
pp. 7-13.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2019.
« A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals ».
International Journal of Material Forming, vol. 12, nº 4.
pp. 693-702.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2018.
« Characterization of mechanical properties and formability of a superplastic Al-Mg alloy ».
In NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Tokyo, Japan, July 30-Aug. 6, 2018)
Coll. « Journal of Physics: Conference Series », vol. 1063.
IOP Publishing.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2018.
« Finite element simulation of high-speed blow forming of an automotive component ».
Metals, vol. 8, nº 11.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2019.
« Prediction of material behavior during biaxial stretching of superplastic 5083 aluminum alloy ».
The International Journal of Advanced Manufacturing Technology, vol. 102, nº 5-8.
pp. 2357-2366.
Majidi, Omid, Jahazi, Mohammad, Bombardier, Nicolas et Samuel, Ehab.
2017.
« Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods ».
In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017)
Coll. « AIP Conference Proceedings », vol. 1896.
USA : American Institute of Physics.
Maldar, A. R., Ebrahimi, G. R., Haghshenas, Meysam, Jahazi, M. et Bocher, P..
2013.
« Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps ».
Journal of Materials Engineering and Performance, vol. 22, nº 11.
pp. 3306-3314.
Mandache, C., Merati, A., Dubourg, L. et Jahazi, M..
2007.
« Pulsed Eddy Current Inspection of friction stir welded components ».
In ASNT fall conference and quality testing show 2007 (Las Vegas, NV, USA, Nov. 12-16, 2007)
ASNT.
Mandache, Catalin, Dubourg, Laurent, Merati, Ali et Jahazi, Mohammad.
2008.
« Pulsed eddy current testing of friction stir welds ».
Materials Evaluation, vol. 66, nº 4.
pp. 382-387.
Maroufkhani, Mohammad, Hakimian, Soorosh, Khodabandeh, Alireza, Radu, Iulian, Hof, Lucas A. et Jahazi, Mohammad.
2023.
« Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint ».
Materials, vol. 16, nº 17.
Maroufkhani, Mohammad, Khodabandeh, Alireza, Radu, Iulian et Jahazi, Mohammad.
2022.
« Pitting corrosion resistance of the 316L stainless steel welds: influenced of oxygen content in the protective gas ».
In Canadian Society for Mechanical Engineering International Congress (Alberta, AB, Canada, 7-8 juin 2022)
Canadian Society for Mechanical Engineering (CSME).
Mary, C. et Jahazi, M..
2007.
« Linear friction welding of IN-718 process optimization and microstructure evolution ».
In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006)
Coll. « Advanced Materials Research »
pp. 357-362.
Vancouver, BC, Canada : Trans Tech Publications.
Mary, Caroline et Jahazi, Mohammad.
2008.
« Multi-scale analysis of IN-718 microstructure evolution during linear friction welding ».
Advanced Engineering Materials, vol. 10, nº 6.
pp. 573-578.
Mashreghi, A. R., Monajatizadeh, H., Jahazi, M. et Yue, S..
2004.
« High temperature deformation of nickel base superalloy Udimet 520 ».
Materials Science and Technology, vol. 20, nº 2.
pp. 161-166.
Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2022.
« Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys ».
Journal of Adhesion Science and Technology, vol. 36, nº 3.
pp. 221-239.
Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2018.
« Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ».
Journal of Manufacturing Processes, vol. 34, part A.
pp. 86-95.
Masoumi, F., Jahazi, M., Shahriari, D. et Cormier, J..
2016.
« Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models ».
Journal of Alloys and Compounds, vol. 658.
pp. 981-995.
Masoumi, F., Shahriari, D., Jahazi, M., Cormier, J. et Devaux, A..
2016.
« Kinetics and mechanisms of γ′ reprecipitation in a Ni-based superalloy ».
Scientific Reports, vol. 6.
Masoumi, F., Shahriari, D., Jahazi, M., Cormier, J. et Flipo, B. C. D..
2017.
« On the occurrence of liquation during linear friction welding of Ni-based superalloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48A, nº 6.
pp. 2886-2899.
Masoumi, F., Shahriari, D., Monajati, H., Cormier, J., Flipo, B. C. D., Devaux, A. et Jahazi, M..
2019.
« Linear friction welding of AD730TM Ni-base superalloy: process-microstructure-property interactions ».
Materials and Design, vol. 183.
Masoumi, F., Thebaud, L., Shahriari, D., Jahazi, M., Cormier, J., Devaux, A. et Flipo, B. C. D..
2018.
« High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ».
Materials Science and Engineering A, vol. 710.
pp. 214-226.
Masoumi, Fatemeh, Jahazi, Mohammad, Cormier, J. et Shahriari, D..
2014.
« Dissolution kinetics and morphological changes of γ′ in AD730TM superalloy ».
In 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens, France, May 12-16, 2014)
Coll. « MATEC Web of Conferences », vol. 14.
Masoumi, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2016.
« Friction stir welding of AA2024 and AA2198 Aluminum alloys: effect of tool geometry and process parameters ».
In 2nd International Conference on Welding and Non Destructive Testing (ICWNDT) (Tehran, Iran, Dec. 20-21, 2016)
Masoumi, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2016.
« The influence of tool geometry on mechanical properties of friction stir welded AA-2024 and AA-2198 joints ».
In 34th International Conference and Exhibition of ICSOBA (Quebec, QC, Canada, Oct. 03-06, 2016)
The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA).
Merati, A., Deronja, J., Dubourg, L. et Jahazi, M..
2009.
« Friction stir processing technology for the repair of nickel-aluminum bronze ».
In Canadian Aeronautics and Space Institute Conference (AERO 2009) (Kanata, ON, Canada, May 5-7, 2009)
Merati, A., Dubourg, L. et Jahazi, M..
2009.
« Application of FSW technology for additive repair of damaged components ».
In RTO-MP-AVT-163 Specialists' Meeting on Additive Technology for Repair of Military Hardware (Bonn, Germany, Oct. 19-22, 2009)
NATO Science and Technology Organization.
Mha, Pierre Tize, Dhondapure, Prashant, Jahazi, Mohammad, Tongne, Amèvi et Pantale, Olivier.
2023.
« Interpolation and extrapolation performance measurement of analytical and ANN-based flow laws for hot deformation behavior of medium carbon steel ».
Metals, vol. 13, nº 3.
Mirzaei, Sajad, Bohlooli Arkhazloo, Nima, Bazdidi-Tehrani, Farzad, Morin, Jean -Benoit, Loucif, Abdelhalim et Jahazi, Mohammad.
2023.
« Influence of spacers and skid sizes on heat treatment of large forgings within an industrial electric furnace ».
Energies, vol. 16, nº 7.
Momeni, A., Ebrahimi, G. R., Jahazi, Mohammad et Bocher, Philippe.
2014.
« Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size ».
Journal of Alloys and Compounds, vol. 587.
pp. 199-210.
Monajati, H. et Jahazi, M..
1998.
« Residual life evaluation of critical boiler parts ».
In Proceedings of the International IME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)
pp. 757-767.
Monajati, H., Jahazi, M., Bahrami, R. et Yue, S..
2004.
« The influence of heat treatment conditions on gamma characteristics in Udimet 720 ».
Materials Science and Engineering A, vol. 373, nº 1-2.
pp. 286-293.
Monajati, H., Jahazi, M. et Hosseini, H..
2000.
« A computer code for the evaluation of the residual life of different boiler components ».
In Proceedings of 15th International Power Engineering Conference (Tehran, Iran, June 18-22, 2000)
pp. 223-231.
Monajati, H., Taheri, A. K., Jahazi, M. et Yue, S..
2005.
« Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 36, nº 4.
pp. 895-905.
Monajati, H., Zarandi, F., Jahazi, M. et Yue, S..
2005.
« Strain induced γ′ precipitation in nickel base superalloy Udimet 720 using a stress relaxation based technique ».
Scripta Materialia, vol. 52, nº 8.
pp. 771-776.
Monajati, Hossein, Zoghlami, Mariem, Tongne, Amevi et Jahazi, Mohammad.
2020.
« Assessing microstructure-local mechanical properties in friction stir welded 6082-T6 aluminum alloy ».
Metals, vol. 10, nº 9.
Mostafa, Ahmad, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2017.
« Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ».
Metals, vol. 7, nº 6.
Mostafa, Ahmad, Shahriari, Davood, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2018.
« Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ».
International Journal of Advanced Manufacturing Technology, vol. 96, nº 1-4.
pp. 371-385.
Muhammed, Musa, Javidani, Mousa, Ebrahimi Sadrabadi, Tahere, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad.
2024.
« A comprehensive review of cathodic arc evaporation physical vapour deposition (CAE-PVD) coatings for enhanced tribological performance ».
Coatings, vol. 14, nº 3.
Muhammed, Musa, Javidani, Mousa, Heidari, Majid et Jahazi, Mohammad.
2023.
« Enhancing the tribological performance of tool steels for wood-processing applications: A comprehensive review ».
Metals, vol. 13, nº 8.
Nanesa, Hadi Ghasemi, Boulgakoff, Julien et Jahazi, Mohammad.
2016.
« Influence of prior cold deformation on microstructure evolution of AISI D2 tool steel after hardening heat treatment ».
Journal of Manufacturing Processes, vol. 22.
pp. 115-119.
Nanesa, Hadi Ghasemi, Jahazi, Mohammad et Levasseur, Tom.
2015.
« On the martensitic transformation of AISI D2 tool steel through cryogenic cooling ».
In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015)
pp. 641-642.
International Conference on Solid-Solid Phase Transformations in Inorganic Materials.
Nanesa, Hadi Ghasemi, Jahazi, Mohammad et Levasseur, Tom.
2015.
« Transmission electron microscopy study of micro-structure evolution in cryotreated AISI D2 tool steel ».
In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015)
pp. 735-736.
International Conference on Solid-Solid Phase Transformations in Inorganic Materials. Nguyen, H.-C., Pham, X-T. et Jahazi, M.. 2018. « Implementing phase-field ductile fracture model for aluminum welded joint ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).
Nikbakht, Roghayeh, Saadati, Mohammad, Kim, Taek-Soo, Jahazi, Mohammad, Kim, Hyoung Seop et Jodoin, Bertrand.
2021.
« Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy ».
Surface & Coatings Technology, vol. 425.
Olufayo, Oluwole A., Chaieb, Oussama, Songmene, Victor et Jahazi, Mohammad. 2019. « Machining studies on high silicon content Al-Si alloys for the aerospace industry ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019).
Omidi, Narges, Farhadipour, Pedram, Baali, Lamya, Bensalem, Karim, Barka, Noureddine et Jahazi, Mohammad.
2023.
« A comprehensive review of additively manufactured H13 tool steel applicable in the injection mold industry: Applications, designs, microstructure, mechanical properties ».
JOM, vol. 75, nº 11.
pp. 4457-4469.
Rodrigues, Samuel F., Siciliano, Fulvio, Aranas Jr., Clodualdo, Silva, Eden S., Reis, Gedeon S., Jahazi, Mohammad et Jonas, John J..
2019.
« Dynamic phase transformation behavior of a Nb-microalloyed steel during roughing passes at temperatures above the Ae3 ».
Metals, vol. 9, nº 3.
Rosenbaum, A., Chamanfar, A., Jahazi, Mohammad et Bonakdar, A..
2014.
« Microstructure analysis of broached inconel-718 gas turbine disc fir-trees ».
In Proceedings of the ASME Turbo Expo (Dusseldorf, Germany, June 16-20, 2014)
American Society of Mechanical Engineers (ASME).
Saadati, Mohammad, Azari Khosroshahi, Rasoul, Ebrahimi, Golamreza et Jahazi, Mohammad.
2017.
« Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ».
Materials Science and Engineering A, vol. 706.
pp. 142-152.
Saadati, Mohammad, Edalat Nobarzad, Amir Keyvan et Jahazi, Mohammad.
2019.
« On the hot cracking of HSLA steel welds: Role of epitaxial growth and HAZ grain size ».
Journal of Manufacturing Processes, vol. 41.
pp. 242-251.
Saadati, Mohammad, Khosroshahi, Rasoul Azari, Ebrahimi, Gholamreza et Jahazi, Mohammad.
2017.
« Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ».
Materials Characterization, vol. 131.
pp. 234-243.
Sadeghi, H., Shariati, M. et Jahazi, M..
1994.
« A computer code for the prediction of forming steps in precision forging ».
In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
pp. 167-174.
Sadeghifar, Morteza, Javidikia, Mahshad, Songmene, Victor et Jahazi, Mohammad.
2022.
« A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates ».
International Journal of Advanced Manufacturing Technology, vol. 121, nº 5-6.
pp. 3977-3987.
Sadeghifar, Morteza, Javidikia, Mahshad, Songmene, Victor et Jahazi, Mohammad.
2020.
« Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions ».
Simulation Modelling Practice and Theory, vol. 104.
Salari, Emad, Jahazi, Mohammad, Khodabandeh, Alireza et Ghasemi-Nanesa, Hadi.
2014.
« Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets ».
Materials and Design, vol. 58.
pp. 381-389.
Salari, Emad, Jahazi, Mohammad, Khodabandeh, Alireza et Nanesa, Hadi Ghasemi.
2016.
« Friction stir lap welding of 5456 aluminum alloy with different sheet thickness: process optimization and microstructure evolution ».
International Journal of Advanced Manufacturing Technology, vol. 82, nº 1-4.
pp. 39-48.
Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine.
2023.
« Analysis of industrial quenching (air transfer + oil immersion) and the cooling regimes after immersion ».
In Heat Treat 2023: Proceedings of the 32nd ASM Heat Treating Society Conference (Detroit, MI, USA, Oct. 17-19, 2023)
pp. 106-113.
ASM International.
Samadi, A. et Jahazi, M..
2000.
« The determination of optimum heat treatment conditions for the forging of a 7075 Al alloy ».
In Proceedings of the Second Non-Ferrous Metallurgy Congress, 9-11 May 2000, Univ. of Kerman, Iran (Kerman, Iran, May 9-11, 2000)
pp. 703-712.
Sarrat, L., Chamanfar, A. et Jahazi, Mohammad. 2012. « Microstructure evolution of Ni base superalloys during thermomechanical processing ». Communication lors de la conférence : Research and Innovation for Transport Systems of the Future (Paris, France, Nov. 12-15, 2012).
Sathiaraj, G. D., Tsai, C. W., Yeh, J. W., Jahazi, M. et Bhattacharjee, P. P..
2016.
« The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy ».
Journal of Alloys and Compounds, vol. 688.
pp. 752-761.
Seede, Raiyan, Mostafa, Ahmad, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2018.
« Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Shafie, F. K., Jahazi, M. et Abassi, M..
2001.
« Influence of temperature and percent reduction on aging behavior of T-250 Maraging Steel ».
In Proceedings of 4th International Conference on Surface Modifications and Heat Treatment (Isphahan, Iran, May 20-23, 2001)
pp. 434-441.
Shafie, F. K., Jahazi, M., Kharazi, Y. et Abassi, M..
2001.
« Thermomechanical processing of T-250 maraging steel ».
In Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)
pp. 41-48.
Shafiee, Ahad, Moon, Jongun, Kim, Hyoung Seop, Jahazi, Mohammad et Nili-Ahmadabadi, Mahmoud.
2019.
« Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy ».
Materials Science and Engineering A, vol. 749.
pp. 271-280.
Shafiee, Ahad, Nili-Ahmadabadi, Mahmoud, Kim, Hyoung Seop et Jahazi, Mohammad.
2020.
« Development and microstructural characterization of a new wrought high entropy superalloy ».
Metals and Materials International, vol. 26, nº 5.
pp. 591-602. Shahriari, D., Loucif, A., Harris, N., Bouissa, Y., Jahazi, M., Lapierre-Boire, L. P. et Poulain, N.. 2016. « Comprehensive simulation of solidification, forging and heat treatment process of large size high strength steel ingots ». Communication lors de la conférence : The 31st Forging Industry Technical Conference (Colombus, OH, USA, Sept. 19-20, 2016).
Shahriari, D., Loucif, Abdelhalim, Jahazi, Mohammad, Tremblay, R. et Beauvais, R..
2015.
« 3D numerical simulation of solidification of large size ingots of high strength steels ».
In 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2015) (Bardolino, Italy, Sept. 23-25, 2015)
Shahriari, D., Zolfaghari, A., Jahazi, Mohammad et Bocher, Philippe.
2013.
« Development of an expert system to characterize weld defects identified by ultrasonic testing ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013)
New York, NY, USA : American Society of Mechanical Engineers.
Shahriari, Davood, Heidari, Iman, Kim, Kitae et Jahazi, Mohammad.
2012.
« Welding temperature distribution in low carbon steel sheets by FDM and FEM ».
In Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012)
Coll. « Steel Research International »
pp. 607-610.
Krakow, Poland : Wiley-VCH Verlag.
Sripada, Jagannadh, Tian, Yuan, Chadha, Kanwal, Saha, Gobinda, Jahazi, Mohammad, Spray, John et Aranas, Clodualdo.
2022.
« Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel ».
Materials Characterization, vol. 192.
Sun, Binhan, Fazeli, Fateh, Scott, Colin, Guo, Baoqi, Aranas, Clodualdo, Chu, Xin, Jahazi, Mohammad et Yue, Stephen.
2018.
« Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ».
Materials Science and Engineering A, vol. 729.
pp. 496-507.
Sun, Binhan, Vanderesse, Nicolas, Fazeli, Fateh, Scott, Colin, Chen, Jianqiang, Bocher, Philippe, Jahazi, Mohammad et Yue, Stephen.
2017.
« Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ».
Scripta Materialia, vol. 133.
pp. 9-13. Tabaie, S., Rézaï-Aria, F. et Jahazi, M.. 2020. « Effect of pre-heat treatment on micro-segregation of nb in the microstructure of linear friction welded inconel 718 fabricated by selective laser melting ». Affiche présentée lors de la conférence : Conference of Metallurgists (Toronto, ON, Canada, Aug. 24-27, 2020).
Tabaie, Seyedmohammad, Rezai-Aria, Farhad, Flipo, Bertrand C. D., Cormier, Jonathan et Jahazi, Mohammad.
2021.
« Post-weld heat treatment of additively manufactured inconel 718 welded to forged ni-based superalloy AD730 by linear friction welding ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 52, nº 8.
pp. 3475-3488.
Tabaie, Seyedmohammad, Rezai-Aria, Farhad, Flipo, Bertrand C. D. et Jahazi, Mohammad.
2022.
« Dissimilar linear friction welding of selective laser melted Inconel 718 to forged Ni-based superalloy AD730: Evolution of strengthening phases ».
Journal of Materials Science and Technology, vol. 96.
pp. 248-261.
Tabaie, Seyedmohammad, Rézaï-Aria, Farhad, Flipo, Bertrand C. D. et Jahazi, Mohammad.
2021.
« Grain size and misorientation evolution in linear friction welding of additively manufactured IN718 to forged superalloy AD730™ ».
Materials Characterization, vol. 171.
Tabaie, Seyedmohammad, Rézaï-Aria, Farhad et Jahazi, Mohammad.
2020.
« Microstructure evolution of selective laser melted inconel 718: Influence of high heating rates ».
Metals, vol. 10, nº 5.
Tabaie, Seyedmohammad, Shahriari, Davood, Plouze, Cléa, Devaux, Alexandre, Cormier, Jonathan et Jahazi, Mohammad.
2019.
« Hot ductility behavior of AD730™ nickel-base superalloy ».
Materials Science and Engineering A, vol. 766.
Talebi, Seyyed Hesamodin, Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Melkonyan, Haikouhi.
2018.
« Influence of starting microstructure on dilatation behavior during tempering of a high strength steel ».
In THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 305-310.
Trans Tech Publications.
Talebi, Seyyed Hesamondin, Jahazi, Mohammad et Melkonyan, Haikouhi.
2018.
« Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ».
Materials, vol. 11, nº 8.
Tamadon, Abbas, Shokuhfar, Ali, Yoozbashizadeh, Hossein et Jahazi, Mohammad.
2012.
« The role of carbon nanotubes in synthesis of TaC nanoparticles by gas – solid reaction ».
Advanced Processes in Materials, vol. 6, nº 3 (22).
pp. 1-7.
Tcheuhebou Tina, Sandrine A., Javidikia, Mahshad, Jahazi, Mohammad et Songmene, Victor.
2023.
« The influence of tool geometry parameters on thermo-mechanical loads and residual stresses induced by orthogonal cutting of AA6061-T6: A numerical investigation ».
Processes, vol. 11, nº 4.
Tize Mha, Pierre, Dhondapure, Prashant, Jahazi, Mohammad, Tongne, Amèvi et Pantalé, Olivier.
2023.
« Artificial neural network-based critical conditions for the dynamic recrystallization of medium carbon steel and application ».
Metals, vol. 13, nº 10.
Tongne, A., Jahazi, Mohammad, Feulvarch, E. et Desrayaud, C..
2015.
« Banded structures in friction stir welded Al alloys ».
Journal of Materials Processing Technology, vol. 221.
pp. 269-278.
Tongne, A., Robe, H., Desrayaud, C., Jahazi, M. et Feulvarch, E..
2016.
« Two dimensional Coupled Eulerian Lagrangian (CEL) model for banded structure prediction in friction stir welding with trigonal tool ».
In ESAFORM 2016: 19th International ESAFORM Conference on Material Forming (Nantes, France, Apr. 27-29, 2016)
Coll. « AIP Conference Proceedings », vol. 1769.
USA : American Institute of Physics.
Tongne, Amèvi, Desrayaud, Christophe, Jahazi, Mohammad et Feulvarch, Eric.
2015.
« Analytical modeling of material flow in friction stir welding ».
In 11th International Seminar on Numerical Analysis of Weldability (Graz, Austria, Sept. 27-30, 2015)
Tongne, Amèvi, Desrayaud, Christophe, Jahazi, Mohammad et Feulvarch, Eric.
2017.
« On material flow in friction stir welded al alloys ».
Journal of Materials Processing Technology, vol. 239.
pp. 284-296.
Touazine, H., Jahazi, Mohammad et Bocher, Philippe.
2014.
« Influence of hard turning on microstructure evolution in the subsurface layers of Inconel 718 ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME).
Touazine, Heithem, Akab, Jordan, Jahazi, Mohammad, Tahan, Antoine, Jomaa, Walid et Bocher, Philippe.
2017.
« Modeling of the microstructure alteration induced by hard turning of Inconel 718 ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 9-12.
pp. 3705-3712.
Touazine, Heithem, Chadha, Kanwal, Jahazi, Mohammad et Bocher, Philippe.
2019.
« Characterization of subsurface microstructural alterations induced by hard turning of Inconel 718 ».
Journal of Materials Engineering and Performance, vol. 28, nº 11.
pp. 7016-7024.
Touazine, Heithem, Jahazi, Mohammad et Bocher, Philippe.
2017.
« Accurate determination of damaged subsurface layers in machined Inconel 718 ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 3419-3427.
Uta, E., Humbert, M., Gey, N., Bocher, P. et Jahazi, M..
2006.
« Mise en évidence et caractérisation des hétérogénéités de textures dans l'alliage de titane IMI 834 de microstructure bimodale à vocation aéronautique ».
In Materiaux 2006 : Dijon, 13-17 Novembre 2006 : [recueil de la conference sur CD-ROM] (Dijon, France, 13-17 nov. 2006)
Dijon : Université de Bourgogne.
Uta, E., Humbert, M., Gey, N., Hazotte, A., Bocher, Philippe et Jahazi, M..
2007.
« Description and characterisation of texture heterogeneitites in titanium alloy Timetal 834 with a bimodal microstructure ».
In 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007)
pp. 259-262.
Warrendale, USA : Minerals, Metals and Materials Society.
Vedaei-Sabegh, Ali, Morin, Jean-Benoît, Champliaud, Henri et Jahazi, Mohammad.
2022.
« Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots ».
Journal of Materials Research and Technology, vol. 21.
pp. 3412-3424.
Vedaei-Sabegh, Ali, Morin, Jean-Benoit et Jahazi, Mohammad.
2020.
« Influence of nickel on high-temperature oxidation and characteristics of oxide layers in two high-strength steels ».
Steel Research International, vol. 91, nº 4.
Vedaei-Sabegh, Ali, Morin, Jean-Benoît et Jahazi, Mohammad.
2022.
« Influence of thermally grown oxide layers thickness on temperature evolution during the forging of large size steel ingots ».
Materials Chemistry and Physics, vol. 275.
Vo, P., Jahazi, M. et Yue, S..
2010.
« FEM modelling of recrystallization behaviour for near-alpha Ti alloy IMI834 ».
In THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009)
Coll. « Advanced Materials Research », vol. 89-91.
pp. 592-597.
Berlin, Germany : Trans Tech Publications.
Vo, P., Jahazi, M. et Yue, S..
2007.
« Recrystallization during Alpha + Beta Processing of IMI834 ».
In Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 1-5, 2007)
pp. 267-270.
Warrendale, PA, USA : Minerals, Metals and Materials Society.
Vo, P., Jahazi, M. et Yue, S..
2007.
« Recrystallization during beta working of IMI834 ».
In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006)
Coll. « Advanced Materials Research »
pp. 965-969.
Vancouver, BC, Canada : Trans Tech Publications.
Vo, P., Jahazi, M. et Yue, S..
2008.
« Recrystallization during thermomechanical processing of IMI834 ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 39, nº 12.
pp. 2965-2980.
Vo, P., Yue, S. et Jahazi, M..
2006.
« Microstructure development of a near alpha-titanium alloy during high temperature deformation ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 473-484.
Canadian Institute of Mining, Metallurgy and Petroleum.
Vo, Phuong, Jahazi, M., Yue, S. et Bocher, Philippe.
2007.
« Flow stress prediction during hot working of near-alpha titanium alloys ».
Materials Science and Engineering : A, vol. 447, nº 1-2.
pp. 99-110.
Wang, X., Jahazi, M. et Yue, S..
2008.
« Investigation of α platelet boundaries in a near-α titanium alloy ».
Materials Science and Engineering A, vol. 492, nº 1–2.
pp. 450-454.
Wang, X., Jahazi, M. et Yue, S..
2006.
« Substructure of high temperature compressed titanium alloy IMI 834 ».
Materials Science and Engineering A, vol. 434, nº 1-2.
pp. 188-193.
Wang, X., Vo, P., Jahazi, M. et Yue, S..
2007.
« Dwell fatigue microstructure in a near-α titanium alloy ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 38, nº 4.
pp. 831-839.
Wanjara, P., Booth-Morrison, C., Hsu, E. et Jahazi, M..
2005.
« Process optimization for linear friction welding of Ti-6Al-4V ».
In Trends in welding research : proceedings of the 7th International Conference (Atlanta, GA, USA, May 16-20, 2005)
Coll. « ASM Proceedings of the International Conference: Trends in Welding Research »
pp. 855-860.
ASM International.
Wanjara, P., Brochu, M., Girard, S. et Jahazi, M..
2005.
« Electron beam freeforming on type 321 stainless steel using BNi-2 brazing paste ».
Materials Science and Technology, vol. 21, nº 5.
pp. 613-618.
Wanjara, P., Brochu, M. et Jahazi, M..
2007.
« Electron beam freeform fabrication on stainless steel ».
In THERMEC 2006 (Vancouver, B.C, Canada, July 4-8, 2006)
Coll. « Materials Science Forum », vol. 539-543.
pp. 4938-4943.
Trans Tech Publications.
Wanjara, P., Brochu, M. et Jahazi, M..
2007.
« Electron beam freeforming of stainless steel using solid wire feed ».
Materials and Design, vol. 28, nº 8.
pp. 2278-2286.
Wanjara, P., Brochu, M. et Jahazi, M..
2006.
« Thin gauge titanium manufacturing using multiple-pass electron beam welding ».
Materials and Manufacturing Processes, vol. 21, nº 5.
pp. 439-451.
Wanjara, P., Brochu, M. et Jahazi, M..
2005.
« Ti–6Al–4V electron beam weld qualification using laser scanning confocal microscopy ».
Materials Characterization, vol. 54, nº 3.
pp. 254-262.
Wanjara, P. et Jahazi, M..
2009.
« Application of shear punch testing to study microstructure-property relationships in electron beam welded 17-4 PH stainless steel ».
Canadian Metallurgical Quarterly, vol. 48, nº 3.
pp. 317-326.
Wanjara, P. et Jahazi, M..
2008.
« Assessing mechanical property gradients associated with microstructural changes in stainless steel weldments by shear punch testing ».
In International Symposium on Recent Developments in Advanced High Strength Steels Processing 2008 : Held at the 47th Conference of Metallurgists (COM) 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 195-206.
Canadian Institute of Mining Metallurgy & Petroleum.
Wanjara, P. et Jahazi, M..
2008.
« Characterization of electron beam welded 17-4 ph stainless steel ».
Canadian Metallurgical Quarterly, vol. 47, nº 4.
pp. 413-436.
Wanjara, P. et Jahazi, M..
2005.
« Linear friction welding of Ti-6Al-4V: Processing, microstructure, and mechanical-property inter-relationships ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 36, nº 8.
pp. 2149-2164.
Wanjara, P., Jahazi, M., Monajati, H., Yue, S. et Immarigeon, J. P..
2005.
« Hot working behavior of near-α alloy IMI834 ».
Materials Science and Engineering A, vol. 396, nº 1–2.
pp. 50-60.
Wanjara, P., Monajati, H., Jahazi, M., Germain, L., Bocher, P. et Immarigeon, J.-P..
2005.
« Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ».
In Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005)
pp. 15-26.
Association for Iron and Steel Technology.
Wanjara, P., Poirier, E. et Jahazi, M. C..
2008.
« Manufacture of a strut on a captive trajectory system by electron beam welding ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 243-254.
Canadian Institute of Mining Metallurgy & Petroleum.
Wanjara, Priti, Jahazi, M., Monajati, H. et Yue, S..
2006.
« Influence of thermomechanical processing on microstructural evolution in near- alloy IMI834 ».
Materials Science and Engineering A, vol. 416, nº 1-2.
pp. 300-311.
Xiao, M., Poon, C., Wanjara, P., Jahazi, M., Fawaz, Z. et Krimbalis, P..
2007.
« Optimization of Nd-YAG laser welding process for Inconel 718 alloy ».
In Progress in Light Metals, Aerospace Materials and Superconductors (Beijing, China, June 25-30, 2006)
Coll. « Materials Science Forum », vol. 546-549.
pp. 1305-1308.
Trans Tech Publications.
Xiao, M., Wanjara, P., Jahazi, M. et Poon, C..
2006.
« Nd:Yag-laser welding of Inconel 718 alloy ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 395-412.
Canadian Institute of Mining, Metallurgy and Petroleum.
Xinjin, Cao, Min, Xiao, Jahazi, M. et Shariff, T..
2007.
« Evolution of microstructures during laser surface cladding of magnesium alloy castings using welding wire ».
In THERMEC 2006 - Proceedings of the 5th International Conference on Processing and Manufacturing of Advanced Materials
Coll. « Materials Science Forum »
pp. 1735-1740.
Switzerland : Trans Tech Publications.
Yang, Jeongho, Heogh, Woongbeom, Ju, Hogi, Kang, Sukhyun, Jang, Tae-Sik, Jung, Hyun-Do, Jahazi, Mohammad, Han, Seung Chul, Park, Seong Je, Kim, Hyoung Seop, Bose, Susmita, Bandyopadhyay, Amit, Jun, Martin Byung-Guk, Kim, Young Won, Kim, Dae-kyeom, Advincula, Rigoberto C., Aranas, Clodualdo et Kim, Sang Hoon.
2024.
« Functionally graded structure of a nitride-strengthened Mg2Si-based hybrid composite ».
Journal of Magnesium and Alloys, vol. 12, nº 3.
pp. 1239-1256.
Zamani, S., Razavizadeh, H. et Jahazi, Mohammad.
2012.
« Microstructure and hardness control of a binary -TiAl alloy by heat treatment ».
In 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012)
pp. 169-178.
Applied Physics and Material Science (APMAS).
Zamani, S., Razavizadeh, H. et Jahazi, Mohammad.
2012.
« The influence of heat-treatment cycles on pressure strength of a binary-TiAl alloy ».
In 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012)
pp. 158-168.
Applied Physics and Material Science (APMAS).
Zhang, C., Jahazi, M. et Tremblay, R..
2020.
« Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingots ».
International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2.
pp. 167-175. Zhang, C., Shahriari, D., Loucif, A., Lapierre-Boire, L. -Ph., Tremblay, R., Melkonyan, H. et Jahazi, M.. 2017. « Influence des paramètres de coulée sur la macroségrégation des aciers à haute résistance mécanique dans les lingots de grande taille: expérimentation et modélisation ». Affiche présentée lors de la conférence : ASM-Montreal Student Night (Montreal, QC, Canada, March 15, 2017).
Zhang, C., Shahriari, D., Loucif, A., Melkonyan, H. et Jahazi, M..
2018.
« Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ».
International Journal of Advanced Manufacturing Technology, vol. 99, nº 9-12.
pp. 3035-3048.
Zhang, Chunping P., Shahriari, Davood, Loucif, Abdelhalim, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Tremblay, Rami.
2017.
« Effect of segregated alloying elements on the high strength steel properties: Application to the large size ingot casting simulation ».
In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-Mar. 02, 2017)
Coll. « Minerals Metals & Materials Series »
pp. 491-500.
Springer International Publishing.
Zhang, Chunping, Jahazi, Mohammad et Gallego, Paloma Isabel.
2020.
« On the impact of microsegregation model on the thermophysical and solidification behaviors of a large size steel ingot ».
Metals, vol. 10, nº 1.
Zhang, Chunping, Loucif, Abdelhalim, Jahazi, Mohammad et Morin, Jean-Benoit.
2022.
« FE modelling and prediction of macrosegregation patterns in large size steel ingots: Influence of filling rate ».
Metals, vol. 12, nº 1.
Zhang, Chunping, Loucif, Abdelhalim, Jahazi, Mohammad, Tremblay, Rami et Lapierre, Louis-Philippe.
2018.
« On the effect of filling rate on positive macrosegregation patterns in large size cast steel ingots ».
Applied Sciences, vol. 8, nº 10.
Zhang, Chunping, Loucif, Abdelhalim, Tremblay, Rami et Jahazi, Mohammad.
2019.
« Influence of non-uniform temperature distribution of the mold on solidification behavior in large-size steel ingots ».
In Proceedings of the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2019) (Toronto, ON, Canada, Aug. 13-15, 2019)
pp. 573-581.
Association for Iron & Steel Technology.
Zhang, Chunping, Shahriari, Davood, Loucif, Abdelhalim, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Tremblay, Rami.
2017.
« Effect of thermo-physical properties on solidification behavior of large size high strength steel ingots ».
In 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim) (Qingdao, China, Aug. 16-17, 2017)
The Chinese Society for Metals.
Zoghlami, Mariem, Jahazi, Mohammad et Songmene, Victor.
2016.
« The effects of friction stir welding parameters on the characteristics of banded structure for aluminum alloys ».
In 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016)
Coll. « Key Engineering Materials », vol. 710.
pp. 155-159.
Trans Tech Publications Ltd. Zoghlami, Mariem, Monajati, Hossein, Jahazi, Mohammad et Songmene, Victor. 2016. « Microstructural analysis of banded structure in friction stir welding of AA6082 aluminum alloy ». Communication lors de la conférence : 34th International Conference and Exhibition of ICSOBA (the International Committee for Study of Bauxite, Alumina & Aluminium) (Québec, QC, Canada, Oct. 03-06, 2016).
Zorgani, M., Garcia-Mateo, C. et Jahazi, M..
2021.
« Effects of ausforming temperature on carbide-free bainite transformation and its correlation to the transformation plasticity strain in a medium C- Si-rich steel ».
Materials Characterization, vol. 176.
Zorgani, M., Garcia-Mateo, C. et Jahazi, M..
2021.
« Microstructural evolution during tempering of an ausformed carbide-free low temperature bainitic steel ».
Materials and Design, vol. 210.
Zorgani, M., Garcia-Mateo, Carlos et Jahazi, M..
2020.
« The role of ausforming in the stability of retained austenite in a medium-C carbide-free bainitic steel ».
Journal of Materials Research and Technology, vol. 9, nº 4.
pp. 7762-7776. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau