| A showcase of ÉTS researchers’ publications and other contributions |
| FRANÇAIS |
Documents publish in 2007Number of items: 813.
Asber, D., Lefebvre, S., Asber, J., Saad, Maarouf and Desbiens, C..
2007.
« Non-parametric short-term load forecasting ».
International Journal of Electrical Power and Energy Systems, vol. 29, nº 8.
pp. 630-635.
Assaad, E., Azzouz, A., Nistor, D., Ursu, A. V., Sajin, T., Miron, D. N., Monette, Frédéric, Niquette, Patrick and Hausler, Robert.
2007.
« Metal removal through synergic coagulation-flocculation using an optimized chitosan-montmorillonite system ».
Applied Clay Science, vol. 37, nº 3-4.
pp. 258-274.
Balout, B., Songmene, Victor and Masounave, Jacques.
2007.
« An experimental study of dust generation during dry drilling of pre-cooled and pre-heated workpiece materials ».
Journal of Manufacturing Processes, vol. 9, nº 1.
pp. 23-34.
Beaulieu, Michel Nadeau, Botez, Ruxandra M. and Hiliuta, Adrian.
2007.
« Ground dynamics model validation by use of landing flight test ».
Journal of Aircraft, vol. 44, nº 6.
pp. 2063-2068.
Beaulieu, M. N., De Jesus Mota, S. and Botez, Ruxandra M..
2007.
« Identification of structural surfaces' positions on an F/A-18 using the subspace identification method from flight flutter tests ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 221, nº 5.
pp. 719-731.
Bel Hadj-Youssef, Nesrine, Al-Haddad, Kamal, Kanaan, H. Y. and Fnaiech, F..
2007.
« Small-signal perturbation technique used for DSP-based identification of a three-phase three-level boost-type Vienna rectifier ».
IET Electric Power Applications, vol. 1, nº 2.
pp. 199-208.
Bennis, Saad and Crobeddu, Eric.
2007.
« New runoff simulation model for small urban catchments ».
Journal of Hydrologic Engineering, vol. 12, nº 5.
pp. 540-544.
Bitsuamlak, G. T., Bédard, Claude and Stathopoulos, T..
2007.
« Modeling the effect of topography on wind flow using a combined numerical-neural network approach ».
Journal of Computing in Civil Engineering, vol. 21, nº 6.
pp. 384-392.
Bonenfant, Danielle, Mimeault, Murielle and Hausler, Robert.
2007.
« Estimation of the CO2 absorption capacities in aqueous 2-(2-aminoethylamino)ethanol and its blends with MDEA and TEA in the presence of SO2 ».
Industrial and Engineering Chemistry Research, vol. 46, nº 26.
pp. 8968-8971.
Botez, Ruxandra Mihaela and Biskri, Djallel Eddine.
2007.
« Unsteady aerodynamic forces mixed method for aeroservoelasticity studies on an F/A-18 aircraft ».
Journal of Aircraft, vol. 44, nº 4.
pp. 1378-1383.
Botez, Ruxandra M., Dinu, Alin Dorian and Cotoi, Iulian.
2007.
« Method based on Chebyshev polynomials for aeroservoelastic interactions on an F/A-18 aircraft ».
Journal of Aircraft, vol. 44, nº 1.
pp. 330-333.
Botez, Ruxandra Mihaela, Dinu, Alin Dorian, Cotoi, Iulian, Stathopoulos, Nicholas, Therien, Sylvain, Dickinson, Martin and Rath, Alexandre.
2007.
« Improved method for creating time-domain unsteady aerodynamic models ».
Journal of Aerospace Engineering, vol. 20, nº 3.
pp. 204-208.
Botez, Ruxandra M. and Rotaru, M..
2007.
« Relationships between flying qualities and flight tests parameters for the F/A-18 aircraft ».
Aeronautical Journal, vol. 111, nº 1118.
pp. 281-282.
Bougie, Stéphanie and Dubé, Jean-Sébastien.
2007.
« Oxydation des isomères de dichlorobenzène à l'aide du persulfate de sodium soumis à une activation thermique ».
Journal of Environmental Engineering and Science, vol. 6, nº 4.
pp. 397-407.
Bourque, Pierre, Oligny, Serge, Abran, Alain and Fournier, Bertrand.
2007.
« Developing project duration models in software engineering ».
Journal of Computer Science and Technology, vol. 22, nº 3.
pp. 348-357.
Bouzidane, Ahmed and Thomas, Marc.
2007.
« Equivalent stiffness and damping investigation of a hydrostatic journal bearing ».
Tribology Transactions, vol. 50, nº 2.
pp. 257-267.
Briot, Sébastien and Bonev, Ilian.
2007.
« Are parallel robots more accurate than serial robots? ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 31, nº 4.
pp. 445-455.
Brissette, François, Khalili, M. and Leconte, Robert.
2007.
« Efficient stochastic generation of multi-site synthetic precipitation data ».
Journal of Hydrology, vol. 345, nº 3-4.
pp. 121-133.
Brosseaud, Yves and Saint-Jacques, Michèle.
2007.
« Will bituminous mixes be made differently tomorrow: state of the art for warm mix asphalt in France ».
EuropeanRoads Review, vol. 10.
pp. 42-53.
Campana, S., de Guise, Jacques A., Rillardon, L., Mitton, D. and Skalli, W..
2007.
« Lumbar intervertebral disc mobility : effect of disc degradation and of geometry ».
European Journal of Orthopaedic Surgery & Traumatology, vol. 17, nº 6.
pp. 533-541.
Carter, Alan and Stroup-Gardiner, Mary.
2007.
« Indirect tension relaxation test to evaluate the effect of the addition of RAP to HMA mixes ».
Journal of Materials in Civil Engineering, vol. 19, nº 3.
pp. 219-226.
Chailleux, Nadège, Lussier, Bertrand, de Guise, Jacques A., Chevalier, Yan and Hagemeister, Nicola.
2007.
« In vitro 3-dimensional kinematic evaluation of 2 corrective operations for cranial cruciate ligament-deficient stifle ».
Canadian Journal of Veterinary Research , vol. 71, nº 3.
pp. 175-180.
Charbonneau, Cindy, Gautrot, Julien E., Hébert, Marie-Josée, Zhu, X. X. and Lerouge, Sophie.
2007.
« Chondroitin-4-sulfate: A bioactive macromolecule to foster vascular healing around stent-grafts after endovascular aneurysm repair ».
Macromolecular Bioscience, vol. 7, nº 5.
pp. 746-752.
Charfi, F., Messaoud, M. B., François, B., Al-Haddad, Kamal and Sellami, F..
2007.
« Enhanced micro modeling technique for semiconductor devices to study faulty mode in power converters ».
International Review of Electrical Engineering, vol. 2, nº 3.
pp. 327-336.
Charlot, E., Kenné, Jean Pierre and Nadeau, Sylvie.
2007.
« Optimal production, maintenance and lockout/tagout control policies in manufacturing systems ».
International Journal of Production Economics, vol. 107, nº 2.
pp. 435-450.
Cheikhi, Laila, Abran, Alain and Buglione, Luigi.
2007.
« The ISBSG software project repository: an analysis from the ISO 9126 quality perspective ».
Software Quality Professional, vol. 9, nº 2.
pp. 4-24.
Coallier, François.
2007.
« Standards, agility, and engineering ».
Computer, vol. 40, nº 9.
pp. 100-102.
Cohen-Adad, J., Chapuisat, S., Doyon, J., Rossignol, S., Lina, Jean Marc, Benali, H. and Lesage, F..
2007.
« Activation detection in diffuse optical imaging by means of the general linear model ».
Medical Image Analysis, vol. 11, nº 6.
pp. 616-629.
Corrales, Y. and Laporte, Claude Y..
2007.
« Étude de cas : évaluation de la migration d'une architecture logicielle d'une société de commerce électronique ».
Génie Logiciel, nº 82.
pp. 40-54.
Côté, Pascal, Parrott, Lael and Sabourin, Robert.
2007.
« Multi-objective optimization of an ecological assembly model ».
Ecological Informatics, vol. 2, nº 1.
pp. 23-31.
Crevier, Clyde and St-Jacques, Michèle.
2007.
« Traffic calming : oser associer les dispositifs au problème ».
Routes et Transports, vol. 36, nº 3.
pp. 24-27.
Crobeddu, E., Bennis, Saad and Rhouzlane, S..
2007.
« Improved rational hydrograph method ».
Journal of Hydrology, vol. 338, nº 1-2.
pp. 63-72.
Cuadrado-Gallego, Juan J. and Abran, Alain.
2007.
« Guest editorial: advances in measurements for software processes assessment ».
[Editorial]. Software Process Improvement and Practice, vol. 12, nº 2.
pp. 121-123.
Dao, Thien-My, Makrem, C. and Abou, Seraphin C..
2007.
« A hybrid Hopfield neural networks based simulation approach for optimisation of manufacturing group scheduling ».
Journal of the Chinese Institute of Industrial Engineers, vol. 24, nº 4.
pp. 300-308.
Darsaut, Tim, Bouzeghrane, Fatiha, Salazkin, Igor, Lerouge, Sophie, Soulez, Gilles, Gevry, Guylaine and Raymond, Jean.
2007.
« The effects of stenting and endothelial denudation on aneurysm and branch occlusion in experimental aneurysm models ».
Journal of Vascular Surgery, vol. 45, nº 6.
pp. 1228-1235.
Daunizeau, Jean, Grova, Christophe, Marrelec, Guillaume, Mattout, Jérémie, Jbabdi, Saad, Pélégrini-Issac, Mélanie, Lina, Jean-Marc and Benali, Habib.
2007.
« Symmetrical event-related EEG/fMRI information fusion in a variational Bayesian framework ».
Neurolmage , vol. 36, nº 1.
pp. 69-87.
David, Éric, Godin, Thierry, Bellemare, Jacques and Lamarre, Laurent.
2007.
« Modeling of the dielectric response of a stator winding insulation from a DC Ramp test ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 14, nº 6.
pp. 1548-1558.
David, Éric and Lamarre, Laurent.
2007.
« Low-frequency dielectric response of epoxy-mica insulated generator bars during multi-stress aging ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 14, nº 1.
pp. 212-226.
Dehak, Najim, Dumouchel, Pierre and Kenny, Patrick.
2007.
« Modeling prosodic features with joint factor analysis for speaker verification ».
IEEE Transactions on Audio, Speech, and Language Processing, vol. 15, nº 7.
pp. 2095-2103.
Duchaine, François and Champliaud, Henri.
2007.
« Structured mesh generation by kriging with local refinement with a new elliptic scheme ».
Engineering with Computers, vol. 23, nº 1.
pp. 61-69.
Duvivier, David, Roux, O., Dhaevers, V., Meskens, N. and Artiba, Abdelhakim.
2007.
« Multicriteria optimisation and simulation: an industrial application ».
Annals of Operations Research, vol. 156, nº 1.
pp. 45-60.
Fuhrman, Christopher P..
2007.
« Exploiting open-source projects to study software design ».
Informatics in Education, vol. 6, nº 1.
pp. 53-66.
Gagné, F., Cejka, P., André, C., Hausler, Robert and Blaise, C..
2007.
« Neurotoxicological effects of a primary and ozonated treated wastewater on freshwater mussels exposed to an experimental flow-through system ».
Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology, vol. 146, nº 4.
pp. 460-470.
Gaudreau, Marc-André, Laville, Frédéric, Voix, Jérémie and Nelisse, Hugues.
2007.
« Variabilité de l'atténuation des protecteurs auditifs mesurée par la méthode field-mire en fonction de la direction du son incident et des bruits du porteur ».
[Conference paper]. Canadian Acoustics = Acoustique Canadienne, vol. 35, nº 3.
pp. 80-81.
Gherboudj, Imen, Bernier, Monique, Hicks, Faye and Leconte, Robert.
2007.
« Physical characterization of air inclusions in river ice ».
Cold Regions Science and Technology, vol. 49, nº 3.
pp. 179-194.
Goutaland, David, Winiarski, Thierry, Angulo-Jaramillo, Rafael, Lassabatere, Laurent, Bievre, Gregory, Buoncristiani, Jean-François, Dubé, Jean-Sébastien, Mesbah, Ali and Cazalets, Henri.
2007.
« Étude hydrogéophysique de la zone non saturée hétérogène d'un bassin d'infiltration d'eaux pluviales ».
Bulletin des Laboratoires des Ponts et Chaussées, nº 268-269.
pp. 173-192.
Granger, Éric, Henniges, Philippe, Sabourin, Robert and Oliveira, Luiz S..
2007.
« Supervised learning of fuzzy ARTMAP neural networks through particle swarm optimization ».
Journal of Pattern Recognition Research, vol. 2, nº 1.
pp. 27-60.
Gupta, Vishwa, Kenny, Patrick, Ouellet, Pierre, Boulianne, Gilles and Dumouchel, Pierre.
2007.
« Combining gaussianized/non-gaussianized features to improve speaker diarization of telephone conversations ».
IEEE Signal Processing Letters, vol. 14, nº 12.
pp. 1040-1043.
Hariri, Y. and Thibeault, Claude.
2007.
« Bridging fault diagnostic tool based on DIDDQ probabilistic signatures, circuit layout parasitics and logic errors ».
IET Computers and Digital Techniques, vol. 1, nº 6.
pp. 694-705.
Hassan, Munzer and Chaallal, Omar.
2007.
« Fiber-reinforced polymer confined rectangular columns: Assessment of models and design guidelines ».
ACI Structural Journal, vol. 104, nº 6.
pp. 693-702.
Hayes, Jane Huffman, Dekhtyar, Alex, Sundaram, Senthil Karthikeyan, Holbrook, E. Ashlee, Vadlamudi, Sravanthi and April, Alain.
2007.
« Requirements tracing on target (RETRO): improving software maintenance through traceability recovery ».
Innovations in Systems and Software Engineering, vol. 3, nº 3.
pp. 193-202.
Helaoui, Mohamed, Boumaiza, Slim, Ghannouchi, Fadhel M., Kouki, Ammar B. and Ghazel, Adel.
2007.
« A new mode-multiplexing LINC architecture to boost the efficiency of WiMAX up-link transmitters ».
IEEE Transactions on Microwave Theory and Techniques, vol. 55, nº 2.
pp. 248-253.
Henry, Nathalie, Fekete, Jean-Daniel and McGuffin, Michael J..
2007.
« NodeTrix: a hybrid visualization of social networks ».
IEEE Transactions on Visualization and Computer Graphics, vol. 13, nº 6.
pp. 1302-1309.
Hiliuta, A. and Botez, Ruxandra M..
2007.
« Flight dynamics helicopter model validation based on flight test data ».
[Conference paper summary]. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 221, nº 5.
pp. 757-765.
Hina, M. D., Tadj, Chakib, Cherif, A. R. and Levy, N..
2007.
« Towards a context-aware pervasive and adaptive multimodality ».
Research in Computing Science, vol. 29.
pp. 225-235.
Kapp, Marcelo N., Freitas, Cinthia O. de A. and Sabourin, Robert.
2007.
« Methodology for the design of NN-based month-word recognizers written on Brazilian bank checks ».
Image and Vision Computing, vol. 25, nº 1.
pp. 40-49.
Kerboua, Y., Lakis, Aouni A., Thomas, Marc and Marcouiller, L..
2007.
« Hybrid method for vibration analysis of rectangular plates ».
Nuclear Engineering and Design, vol. 237, nº 8.
pp. 791-801.
Khani, Mahborbeh, Riyad, Kechroud and Soulaimani, Azzeddine.
2007.
« Finite element analysis of an earmuff-earcanal system ».
[Conference paper]. Canadian Acoustics = Acoustique Canadienne, vol. 35, nº 3.
pp. 66-67.
Khalili, Malika, Leconte, Robert and Brissette, François.
2007.
« Stochastic multisite generation of daily precipitation data using spatial autocorrelation ».
Journal of Hydrometeorology, vol. 8, nº 3.
pp. 396-412.
Kharma, N., Moghnieh, H., Yao, J., Guo, Y. P., Abu-Baker, A., Laganiere, J., Rouleau, G. and Cheriet, Mohamed.
2007.
« Automatic segmentation of cells from microscopic imagery using ellipse detection ».
IET Image Processing, vol. 1, nº 1.
pp. 39-47.
Khelifi, Adel and Abran, Alain.
2007.
« Software measurement standards etalons: a design process ».
International Journal on Computers, vol. 1, nº 3.
pp. 41-48.
Khettabi, R., Songmene, Victor and Masounave, Jacques.
2007.
« Effect of tool lead angle and chip formation mode on dust emission in dry cutting ».
Journal of Materials Processing Technology, vol. 194, nº 1-3.
pp. 100-109.
Ko, Albert Hung-Ren , Sabourin, Robert, Britto Jr, A. and Oliveira, L..
2007.
« Pairwise fusion matrix for combining classifiers ».
Pattern Recognition, vol. 40, nº 8.
pp. 2198-2210.
Lafortune, Pierre, McCormick, Jason, Desroches, Reginald and Terriault, Patrick.
2007.
« Testing of superelastic recentering pre-strained braces for seismic resistant design ».
Journal of Earthquake Engineering, vol. 11, nº 3.
pp. 383-399.
Lalonde, Nadine-Michèle, Dansereau, Jean, Lacoste, Michèle and Aissaoui, Rachid.
2007.
« Modelling skin pelvic landmark coordinates into corresponding internal bone for wheelchair users ».
IEEE Transactions on Biomedical Engineering, vol. 54, nº 1.
pp. 11-18.
Lamarche, Bruno and Rivest, Louis.
2007.
« Dynamic product modeling with inter-features associations: Comparing customization and automation ».
Computer-Aided Design and Applications, vol. 4, nº 6.
pp. 877-886.
Lamarche, Louis and Beauchamp, Benoit.
2007.
« A new contribution to the finite line-source model for geothermal boreholes ».
Energy and Buildings, vol. 39, nº 2.
pp. 188-198.
Lamarche, Louis and Beauchamp, Benoit.
2007.
« A fast algorithm for the simulation of GCHP systems ».
[Conference paper]. ASHRAE Transactions, vol. 113, nº 1.
pp. 470-476.
Lamarche, Louis and Beauchamp, Benoit.
2007.
« New solutions for the short-time analysis of geothermal vertical boreholes ».
International Journal of Heat and Mass Transfer, vol. 50, nº 7-8.
pp. 1408-1419.
Laporte, Claude Y., April, Alain and Bencherif, Khaled.
2007.
« Teaching software quality assurance in an undergraduate software engineering program ».
Software Quality Professional, vol. 9, nº 3.
pp. 4-10.
Laporte, Claude Y., April, Alain and Renault, Alain.
2007.
« Applying international software engineering standards in very small enterprises ».
CrossTalk : the Journal of Defense Software Engineering, vol. 20, nº 2.
pp. 29-30.
Lasfar, Samir, Monette, Frédéric, Millette, Louise and Azzouz, Abdelkrim.
2007.
« Intrinsic growth rate: a new approach to evaluate the effects of temperature, photoperiod and phosphorus-nitrogen concentrations on duckweed growth under controlled eutrophication ».
Water Research, vol. 41, nº 11.
pp. 2333-2340.
Lessard, Simon, Bigras, Pascal and Bonev, Ilian A..
2007.
« A new medical parallel robot and its static balancing optimization ».
Journal of Medical Devices , vol. 1, nº 4.
pp. 272-278.
Lerouge, Sophie, Major, Annie, Girard-Lauriault, Pierre-Luc, Raymond, Marc-André, Laplante, Patrick, Soulez, Gilles, Mwale, Fackson, Wertheimer, Michael R. and Hébert, Marie-Josée.
2007.
« Nitrogen-rich coatings for promoting healing around stent-grafts after endovascular aneurysm repair ».
Biomaterials, vol. 28, nº 6.
pp. 1209-1217.
Levasseur, Annie, Tetreault, Patrice, de Guise, Jacques A., Nuño, Natalia and Hagemeister, Nicola.
2007.
« The effect of axis alignment on shoulder joint kinematics analysis during arm abduction ».
Clinical Biomechanics, vol. 22, nº 7.
pp. 758-766.
Liu, Zhaoheng.
2007.
« Characterisation of optimal human driver model and stability of a tractor-semitrailer vehicle system with time delay ».
Mechanical Systems and Signal Processing, vol. 21, nº 5.
pp. 2080-2098.
Liu, Zhaoheng and Payre, Guy.
2007.
« Stability analysis of doubly regenerative cylindrical grinding process ».
Journal of Sound and Vibration, vol. 301, nº 3-5.
pp. 950-962.
Liu, Zhaoheng and Payre, Guy.
2007.
« Global bifurcation analysis of a nonlinear road vehicle system ».
Journal of Computational and Nonlinear Dynamics, vol. 2, nº 4.
pp. 308-315.
Lorin, Emmanuel, Ben Haj Ali, Amine and Soulaimani, Azzeddine.
2007.
« A positivity preserving finite element-finite volume solver for the Spalart-Allmaras turbulence model ».
Computer Methods in Applied Mechanics and Engineering, vol. 196, nº 17-20.
pp. 2097-2116.
Loukili, Youssef and Soulaimani, Azzeddine.
2007.
« Numerical tracking of shallow water waves by the unstructured finite volume WAF approximation ».
International Journal of Computational Methods in Engineering Science and Mechanics, vol. 8, nº 2.
pp. 75-88.
Luo, Wenbo, Jazouli, Said and Vu-Khanh, Toan.
2007.
« Modeling of nonlinear viscoelastic creep of polycarbonate ».
E-Polymers, vol. 7, nº 1.
p. 11.
Luo, Wen-Bo, Wang, Chu-Hong, Vu-Khanh, Toan and Jazouli, Said.
2007.
« Time-stress equivalence: application to nonlinear creep of polypropylene ».
Journal of Central South University of Technology, vol. 14, nº suppl. 1.
pp. 310-313.
Ma, Irwin, Wong, Tony and Sankar, Thiagas.
2007.
« An engineering approach to forecast volatility of financial indices ».
International Journal of Computational Intelligence, vol. 3, nº 1.
pp. 23-35.
Mac-Thiong, Jean-Marc, Pinel-Giroux, Fanny-Maud, de Guise, Jacques A. and Labelle, Hubert.
2007.
« Comparison between constrained and non-constrained cobb techniques for the assessment of thoracic kyphosis and lumbar lordosis ».
European Spine Journal, vol. 16, nº 9.
pp. 1325-1331.
Mareuil, Arnaud, Leconte, Robert, Brissette, François and Minville, Marie.
2007.
« Impacts of climate change on the frequency and severity of floods in the Chateauguay River basin, Canada ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 34, nº 9.
pp. 1048-1060.
Miranda, Eduardo and Abran, Alain.
2007.
« Calculating project contingencies to avoid software project failures ».
Projects & Profits, vol. 7, nº 12.
pp. 38-47.
Miraoui, M. and Tadj, Chakib.
2007.
« A service oriented architecture for context-aware systems ».
Research in Computing Science, vol. 29.
pp. 236-244.
Nechache, Akli and Bouzid, Abdel-Hakim.
2007.
« Creep analysis of bolted flange joints ».
International Journal of Pressure Vessels and Piping, vol. 84, nº 3.
pp. 185-194.
Niquette, Patrick, Hausler, Robert, Lahaye, Pierre and Lacasse, Maurice.
2007.
« An innovative process for the treatment of high loaded surface waters for small communities ».
Journal of Environmental Engineering and Science : Revue du Génie et de la Science de l'Environnement, vol. 6, nº 2.
pp. 139-145.
Nordstrom, Ernst and Dziong, Zbigniew.
2007.
« CAC and routing for multi-service networks with blocked wide-band calls delayed. Part II: approximative link MDP framework ».
European Transactions on Telecommunications, vol. 18, nº 1.
pp. 13-33.
Noumeir, Rita, Lemay, Alain and Lina, Jean-Marc.
2007.
« Pseudonymization of radiology data for research purposes ».
Journal of Digital Imaging, vol. 20, nº 3.
pp. 284-295.
Ortega, Lina M., Lebrun, Rémi, Blais, Jean-François and Hausler, Robert.
2007.
« Treatment of an acidic leachate containing metal ions by nanofiltration membranes ».
Separation and Purification Technology, vol. 54, nº 3.
pp. 306-314.
Parent, Luc, Songmene, Victor and Kenné, Jean Pierre.
2007.
« A generalised model for optimising an end milling operation ».
Production Planning and Control, vol. 18, nº 4.
pp. 319-337.
Perraton, Daniel, Meunier, Mathieu and Carter, Alan.
2007.
« Application des méthodes d'empilement granulaire à la formulation des Stones Matrix Asphalts (SMA) ».
Bulletin des Laboratoires des Ponts et Chaussées, nº 270-271.
pp. 87-108.
Rivard, Hugues and Miresco, Edmond T..
2007.
« Building on IT ».
Journal of Computing in Civil Engineering, vol. 21, nº 2.
pp. 63-64.
Saryazdi, Saeid and Cheriet, Mohamed.
2007.
« PKCS: a polynomial kernel family with compact support for scale-space image processing ».
IEEE Transactions on Image Processing, vol. 16, nº 9.
pp. 2299-2308.
Sassi, Sadok, Badri, Bechir and Thomas, Marc.
2007.
« A numerical model to predict damaged bearing vibrations ».
Journal of Vibration and Control, vol. 13, nº 11.
pp. 1603-1628.
Seddik, H., Sayadi, M., Fnaiech, F. and Cheriet, Mohamed.
2007.
« A new multi-domains image watermarking method based on multi-watermarks embedding and neural network segmentation ».
Applied Mathematical Sciences, vol. 1, nº 39.
pp. 1927-1939.
Séguin, Normand and Abran, Alain.
2007.
« Inventaire des principes du génie logiciel ».
Génie Logiciel, nº 80.
pp. 45-51.
Seo, Jaho, Venugopal, Ravinder and Kenné, Jean-Pierre.
2007.
« Feedback linearization based control of a rotational hydraulic drive ».
Control Engineering Practice, vol. 15, nº 12.
pp. 1495-1507.
Singh, Brij N., Singh, Bhim, Chandra, Ambrish, Rastgoufard, Parviz and Al-Haddad, Kamal.
2007.
« An improved control algorithm for active filters ».
IEEE Transactions on Power Delivery, vol. 22, nº 2.
pp. 1009-1020.
Soulez, Gilles, Lerouge, Sophie, Salazkin, Igor, Darsaut, Tim, Oliva, Vincent L. and Raymond, Jean.
2007.
« Type I and collateral flow in experimental aneurysm models treated with stent-grafts ».
Journal of Vascular and Interventional Radiology, vol. 18, nº 2.
pp. 265-272.
Stroup-Gardiner, Mary, Turochy, Rod E. and Carter, Alan.
2007.
« Influence of various material and traffic inputs on flexible pavement design methods for Alabama roadways ».
Journal of Transportation Engineering, vol. 133, nº 8.
pp. 455-461.
Südhoff, Ingrid, Van Driessche, Stéphane, Laporte, Sébastien, de Guise, Jacques A. and Skalli, Wafa.
2007.
« Comparing three attachment systems used to determine knee kinematics during gait ».
Gait and Posture, vol. 25, nº 4.
pp. 533-543.
Tang, An, Cloutier, Guy, Therasse, Eric, Beaudoin, Gilles, Qanadli, Salah D., Giroux, Marie France, Boussion, Nicolas, de Guise, Jacques A., Oliva, Vincent L. and Soulez, Gilles.
2007.
« Optimization of spatial resolution for peripheral magnetic resonance angiography ».
Academic Radiology, vol. 14, nº 1.
pp. 54-61.
Tanguay, Frédéric, Mac-Thiong, Jean-Marc, de Guise, Jacques A. and Labelle, Hubert.
2007.
« Relation between the sagittal pelvic and lumbar spine geometries following surgical correction of adolescent idiopathic scoliosis ».
European Spine Journal, vol. 16, nº 4.
pp. 531-536.
Temimi, M., Leconte, Robert, Brissette, François and Chaouch, N..
2007.
« Dynamic estimation of free water surface coverage from a basin wetness index of the Mackenzie river basin using SSM/I measurements ».
Canadian Journal of Remote Sensing = Journal Canadien de Télédétection, vol. 33, nº 2.
pp. 121-129.
Temimi, Marouane, Leconte, Robert, Brissette, François and Chaouch, N..
2007.
« Flood and soil wetness monitoring over the Mackenzie River Basin using AMSR-E 37 GHz brightness temperature ».
Journal of Hydrology, vol. 333, nº 2-4.
pp. 317-328.
Torra, V., Isalgue, A., Martorell, F., Terriault, Patrick and Lovey, F. C..
2007.
« Built in dampers for family homes via SMA: an ANSYS computation scheme based on mesoscopic and microscopic experimental analyses ».
Engineering Structures, vol. 29, nº 8.
pp. 1889-1902.
Truong, To Oanh, Hausler, Robert, Monette, Frédéric and Niquette, Patrick.
2007.
« Valorisation des résidus industriels de pêches pour la transformation de chitosane par technique hydrothermo-chimique ».
Revue des Sciences de l'Eau, vol. 20, nº 3.
pp. 253-262.
Tse, Leonard W. H., Bui, Bao T. , Lerouge, Sophie, Salazkin, Igor, Therasse, Eric, Oliva, Vincent L and Soulez, Gilles.
2007.
« In-vivo antegrade fenestration (IVAF) of abdominal aortic stent grafts ».
Journal of Endovascular Therapy, vol. 14, nº 2.
pp. 158-167.
Vendittoli, Pascal-André, Ganapathi, Muthu, Nuño, Natalia, Plamondon, Dominic and Lavigne, Martin.
2007.
« Factors affecting hip range of motion in surface replacement arthroplasty ».
Clinical Biomechanics, vol. 22, nº 9.
pp. 1004-1012.
Vo, Phuong, Jahazi, M., Yue, S. and Bocher, Philippe.
2007.
« Flow stress prediction during hot working of near-alpha titanium alloys ».
Materials Science and Engineering: A, vol. 447, nº 1-2.
pp. 99-110.
Watters Sibuet, Cristophe and Masson, Christian.
2007.
« Recent advances in modeling of wind turbine wake vortical structure using a differential actuator disk theory ».
[Conference paper]. Journal of Physics : Conference Series, vol. 75.
012037- 48.
Xiaoping, Tu, Dessaint, Louis-A., Fallati, N. and De Kelper, Bruno.
2007.
« Modeling and real-time simulation of internal faults in synchronous generators with parallel-connected windings ».
IEEE Transactions on Industrial Electronics, vol. 54, nº 3.
pp. 1400-1409.
Zhao, Jian-Hua, Liu, Zhaoheng and Dao, My-Thien.
2007.
« Reliability optimization using multiobjective ant colony system approaches ».
Reliability Engineering and System Safety, vol. 92, nº 1.
pp. 109-120.
Arafin, M. A., Medraj, M., Turner, Daniel P. and Bocher, Philippe.
2007.
« Transient liquid phase bonding of Inconel 718 and Inconel 625 with BNi-2: modeling and experimental investigations ».
Materials Science and Engineering: A, vol. 447, nº 1-2.
pp. 125-133.
Arafin, M. A., Medraj, M., Turner, D. P. and Bocher, Philippe.
2007.
« Effect of alloying elements on the isothermal solidification during TLP bonding of SS 410 and SS 321 using a BNi-2 interlayer ».
Materials Chemistry and Physics, vol. 106, nº 1.
pp. 109-119.
Ammari, Mohamed L. and Gagnon, François.
2007.
« Iterative channel estimation and decoding of turbo-coded OFDM symbols in selective Rayleigh channel ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 32, nº 1.
pp. 9-18.
Alexandru, Paul and Nadeau, Sylvie.
2007.
« Integration of operational, health and safety risks using flow diagrams ».
Buletinul Institutului Politehnic Din Iasi, vol. LIII (LVII), nº fasc. 3.
pp. 35-42.
Akyel, C., Babic, S. I., Kincic, S. and Lagacé, Pierre Jean.
2007.
« Magnetic force calculation between thin circular coils and thin filamentary circular coil in air ».
Journal of Electromagnetic Waves and Applications, vol. 21, nº 9.
pp. 1273-1283.
Adankon, Mathias M. and Cheriet, Mohamed.
2007.
« Optimizing resources in model selection for support vector machine ».
Pattern Recognition, vol. 40, nº 3.
pp. 953-963.
Abran, Alain, Ndiaye, Iphigenie and Bourque, Pierre.
2007.
« Evaluation of a black-box estimation tool : a case study ».
Software Process Improvement and Practice, vol. 12, nº 2.
pp. 199-218.
Kaddissi, Claude, Kenné, Jean-Pierre and Saad, Maarouf.
2007.
« Identification and real-time control of an electrohydraulic servo system based on nonlinear backstepping ».
IEEE/ASME Transactions on Mechatronics, vol. 12, nº 1.
pp. 12-22.
Kenné, Jean-Pierre, Gharbi, Ali and Beit, M..
2007.
« Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale ».
European Journal of Operational Research, vol. 178, nº 2.
pp. 408-420.
Gharbi, Ali, Kenné, Jean-Pierre and Beit, M..
2007.
« Optimal safety stocks and preventive maintenance periods in unreliable manufacturing systems ».
International Journal of Production Economics, vol. 107, nº 2.
pp. 422-434.
Lavoie, P., Kenné, Jean Pierre and Gharbi, Ali.
2007.
« Production control and combined discrete/continuous simulation modeling in failure-prone transfer lines ».
International Journal of Production Research, vol. 45, nº 24.
pp. 5667-5685.
Le Cocq, Cécile, Laville, Frédéric and Gargour, Christian.
2007.
« Débruitage par ondelettes de la parole en milieu industriel ».
[Conference paper]. Canadian Acoustics = Acoustique Canadienne, vol. 35, nº 3.
pp. 112-113.
Sih, G.C and Nait-Abdelaziz, Moussa and Vu-Khanh, Toan, éds.
2007.
« Particle and continuum aspects of mesomechanics : mesomechanics ».
London : ISTE. 815 p.
Thomas, Marc and Laville, Frédéric, éds.
2007.
« Premier congrès international sur l'ingénierie des risques industriels : CIRI 2007 : Montréal (Québec) Canada, 17-18 et 19 décembre 2007 : actes ».
Montréal : École de technologie supérieure. 656 p.
Cheriet, Mohamed, Kharma, Nawwaf, Liu, Cheng-Lin and Suen, Ching.
2007.
« Character recognition systems : a guide for students and practioners ».
Hoboken, N.J., USA : Wiley-Interscience. 326 p.
Thomas, Marc and Laville, Frédéric.
2007.
« Simulation des vibrations mécaniques par Matlab, Simulink et Ansys ».
Éd. rev. et corr.
Québec : Presses de l'Université du Québec. 702 p.
Arteau, Jean, Beauchamp, Yves, Langlais, Ian and Vachon, Frédéric.
2007.
« Travail en hauteur et protection contre les chutes pour les élagueurs ».
Coll. « Études et Recherches », vol. R-505.
Montréal : IRSST. 133 p.
Roy, Jean-Philippe, Assaf, Gabriel J. and St-Jacques, Michèle.
2007.
« Adaptation au contexte québécois des modèles d'évaluation des coûts aux usagers du HERS-ST et du HDM-4 : rapport de recherche final ».
version 1.3.
Québec : Transports Québec; École de technologie supérieur, Dép. de génie de la construction. 167 p.
Vu-Khanh, Toan, Dolez, Patricia, Harrabi, L, Lara, J, Larivière, C, Tremblay, G and Nadeau, Sylvie.
2007.
« Caractérisation de la souplesse des gants de protection par des méthodes mécaniques et une méthode biomécanique basée sur l'électromyographie de surface ».
Coll. « Études et Recherches », vol. R-506.
Montréal : Institut de recherche Robert-Sauvé en santé et en sécurité du travail du Québec. 85 p.
Abran, Alain and Symons, Charles.
2007.
« Using the COSMIC full function point approach ».
In
Software measurement : establish - extract - evaluate - execute.
pp. 169-180. Berlin Heidelberg : Springer .
Abran, Alain, Al Qutaish, R., Desharnais, Jean-Marc and Habra, N..
2007.
« ISO-based model to measure software product quality ».
In
Software quality measurement - concept and approaches.
pp. 66-61. Naragarjuna Hills; India : Institute of Chertered Financial Analysts of India (ICFAI).
Cheriet, Mohamed, Al-Ohali, Y., Ayat, N. and Suen, C.Y..
2007.
« Arabic cheque processing system : issues and future trends ».
In
Digital document processing : major directions and recent advances.
pp. 213-234. London : Springer-Verlag London Limited.
Asber, D., Lefebvre, S., Saad, Maarouf and Desbiens, C..
2007.
« Modeling of distribution loads for short and medium-term load forecasting ».
In IEEE Power Engineering Society General Meeting (PES) (Tampa, FL, USA, June 24-28, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Gargouri, I. and de Guise, Jacques A..
2007.
« Automated method for clinic and morphologic analysis of bones using implicit modeling technique ».
In 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS) (Lyon, France, Aug. 22-26, 2007)
pp. 5095-5098.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
El Hachimi, Mohamed, Tremblay, Bernard, Kadoch, Michel and Bennani, Maria.
2007.
« Dynamic bandwidth allocation in SIP based MPLS ».
In 21st International Conference on Advanced Information Networking and Applications (AINA) (Niagara Falls, Canada, May 21-23, 2007)
pp. 917-923.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Séris, Julie, Gargour, Christian and Laville, Frédéric.
2007.
« VAD INNES : a voice activity detector for noisy industrial environments ».
In IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) (Montreal, Canada, Aug. 5-8, 2007)
pp. 377-380.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bel Haj Youssef, Nesrine and Al Haddad, Kamal.
2007.
« Experimental implementation of a new quasi-linear control technique on a 1.5 kW three-phase boost- type Vienna rectifier ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Vigo, Spain, June 4-7, 2007)
pp. 497-502.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Lamarche, Bruno and Rivest, Louis.
2007.
« Achieving a dynamic product model with inter-features associations ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Lam, Ngok, Dziong, Zbigniew and Mason, Lorne G..
2007.
« Network capacity allocation in service overlay networks ».
In Managing Traffic Performance in Converged Networks : 20th International Teletraffic Congress, ITC20 2007, Ottawa, Canada, June 17-21, 2007 : Proceedings (Ottawa, Canada, July 17-21, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4516.
pp. 224-235.
Heidelberg, Germany : Springer Verlag.
Abran, Alain, Garbajosa, Juan and Cheikhi, Laila.
2007.
« Estimating the testing volume and effort for testing and verification and validation ».
In Proceedings of the IWSM - Mensura 2007 (Palma de Mallorca, Spain, Nov. 5-9, 2007)
pp. 216-234.
UIB-Universitat de les Illes Baleares.
Cuadrado-Gallego, Juan Jose, Rodriguez, Daniel, Machado, Fernando and Abran, Alain.
2007.
« Convertibility between IFPUG and COSMIC Functional Size Measurements ».
In Product-Focused Software Process Improvement : 8th International Conference, PROFES 2007, Riga, Latvia, July 2-4, 2007 : Proceedings (Riga, Latvia, Jul. 2-4, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4589.
pp. 273-283.
Berlin, Germany : Springer-Verlag.
Laporte, Claude Y., April, Alain and Benchérif, K..
2007.
« Teaching software quality assurance in an undergraduate software engineering program ».
In 5th International Conference on Industrial automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Laporte, Claude Y., Doucet, Mikel, Bourque, Pierre and Belkébir, Youssef.
2007.
« Utilization of a set of software engineering roles for a multinational organization ».
In Product-Focused Software Process Improvement : 8th International Conference, PROFES 2007, Riga, Latvia, July 2-4, 2007 : Proceedings (Riga, Latvia, Jul. 2-4, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4589.
pp. 35-50.
Berlin, Germany : Springer-Verlag.
Valdes, S. and Abran, Alain.
2007.
« Industry case studies of estimation models based on fuzzy sets ».
In Proceedings of the IWSM - Mensura 2007 (Palma de Mallorca, Spain, Nov. 5-9, 2007)
pp. 87-101.
UIB-Universitat de les Illes Baleares.
Bibor, Étienne and Masson, Christian.
2007.
« Power performance via nacelle anemometry on complex terrain ».
In Wind Energy : Proceedings of the Euromech Colloquium EUROMECH (Oldenburg, Germany, Oct. 4-7, 2005)
pp. 43-47.
Berlin, Heidelberg : Springer-Verlag Berlin Heidelberg.
Cocle, R., Dufresne, Louis and Winckelmans, G..
2007.
« Investigation of multiscale subgrid models for LES of instabilities and turbulence in wake vortex systems ».
In Complex Effects in Large Eddy Simulations (Lemesos, Cyprus, Sept. 21-24, 2005)
Coll. « Lecture Notes in Computational Science and Engineering », vol. 56.
pp. 141-159.
Berlin, Heidelberg : Springer-Verlag.
Corriveau, G., Guilbault, Raynald and Tahan, Antoine.
2007.
« Optimisation d'une turbine hydroélectrique par algorithmes génétiques ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Guero, Gbeuli and Vu-Khanh, Toan.
2007.
« Mechanisms of physical aging in polypropylene ».
In Particle and Continuum Aspects of Mesomechanics : Mesomechanics 2007 (Giens, France, May 13-17, 2007)
pp. 63-72.
London : ISTE.
Khalfi, B. and Guilbault, Raynald.
2007.
« Turbine hydroélectrique Francis: un nouveau modèle rapide et précis de calcul des contraintes ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Lacasse, L., Tahan, Antoine and Liu, Zhaoheng.
2007.
« Automatic characterization of wood board surface defects ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Liu, Zhaoheng, Thomas, Marc, Fihey, Jean-Luc and Li, Jinliang.
2007.
« Dynamic analysis of manipulators with flexible joints and flexible links ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Nohilé, Cédrick, Dolez, Patricia and Vu-Khanh, Toan.
2007.
« Mechanical and chemical effects of solvent swelling on butyl rubber ».
In Particle and Continuum Aspects of Mesomechanics : Mesomechanics 2007 (Giens, France, May 13-17, 2007)
pp. 527-534.
London : ISTE.
Ouahabi, Abdelhakim, Thomas, Marc, Kobayashi, Makiko and Jen, Cheng Kuei.
2007.
« Structural health monitoring of aerospace structures with sol-gel spray sensors ».
In Damage Assessment of Structures VII (Turin, Italy, June 25-27, 2007)
Coll. « Key Engineering Materials », vol. 347.
pp. 505-510.
Switzerland : Trans Tech Publications Ltd.
Tahan, Antoine, Liu, Zhaoheng and Lacasse, L..
2007.
« New method for characterization of wood ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Brissette, François, Leconte, Robert and Minville, M..
2007.
« Can we adequately quantify the increase/decrease of flooding due to climate change? ».
In IEEE EIC Climate Change Conference (Ottawa, Canada, May 10-12, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Brosseaud, Y. and St-Jacques, Michèle.
2007.
« Will bituminous mixes be made differently tomorrow: state of the art for warm-mix asphalt in France ».
In The Choice for Sustainable Development. Pre-Proceedings of the 23rd PIARC World Road Congress (Paris, France, Sept.17-21, 2007)
World Road Association.
Brosseaud, Yves, St-Jacques, Michèle and Leroy, Christine.
2007.
« Les matériaux bitumineux tièdes arrivent en ville: premières applications d'asphaltes et enrobés tièdes en ville de Paris ».
In Infra 2007 : les infrastructures municipales : un patrimoine à préserver : 13e édition de la Semaine des infrastructures urbaines (Laval, Canada, 5-7 nov. 2007)
Montréal, Canada : Centre d'Expertise et de Recherche en Infrastructures Urbaines (CERIU).
Chaouch, Naira, Leconte, Robert, Magagi, Ramata and Temimi, Marouane.
2007.
« Surface soil moisture status over the Mackenzie River Basin using Temperature/Vegetation Index ».
In IEEE International Geoscience and Remote Sensing Symposium (IGARSS) (Barcelona, Spain, Jul. 23-28, 2007)
pp. 1846-1848.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Gherboudj, Imen, Bernier, Monique and Leconte, Robert.
2007.
« Validation of a backscatter model of a river ice covers using Radarsat-1 images ».
In IEEE International Geoscience and Remote Sensing Symposium (IGARSS) (Barcelona, Spain, Jul. 23-28, 2007)
pp. 1087-1090.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Leconte, Robert, Daly, S., Gauthier, Y., Yankielun, N., Bérubé, F. and Bernier, M..
2007.
« A controlled experiment to retrieve river ice characteristics from an FMCW radar system ».
In 14th Workshop Hydraulics of Ice Covered Rivers (Québec, Canada, June 19-22, 2007)
Canada : CRIPE.
Minville, M., Brissette, François and Leconte, Robert.
2007.
« Impacts des changements climatiques sur le régime hydrologique et la gestion du système hydrique du bassin versant de la rivière Péribonka ».
In Canadian DAM Association Annual Conference (CDA) = Association Canadienne des Barrages (ABC) (Quebec City, Canada, Sept. 30-Oct. 6, 2006)
Nollet, Marie-José, LeBoeuf, Denis and Khaled, Amar.
2007.
« Microzonage et vulnérabilité sismique des ponts de l a ville de Québec ».
In 14e Colloque sur la Progression de la Recherche Québécoise sur les Ouvrages d'Art (Québec, Canada, 8-9 mai 2007)
Québec, Canada : Transports Québec.
Pellecuer, L., St-Jacques, Michèle and Assaf, Gabriel J..
2007.
« L'intégration de l'environnement dans la gestion durable des routes ».
In Infra 2007 : les infrastructures municipales : un patrimoine à préserver : 13e édition de la Semaine des infrastructures urbaines (Laval, Canada, 5-7 nov. 2007)
Montréal, Canada : Centre d'Expertise et de Recherche en Infrastructures Urbaines (CERIU).
Adankon, Mathias M. and Cheriet, Mohamed.
2007.
« Learning semi-supervised SVM with genetic algorithm ».
In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007)
pp. 1825-1830.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Al-Ohali, Y., Alanzi, A., Suen, C.Y., Kasvand, T. and Cheriet, Mohamed.
2007.
« Combined measures toward restoration of temporal information from offline handwritten text ».
In 9th International Symposium on Signal Processing and its Applications (ISSPA) (Sharjah, United Arab Emirates, Feb. 12-15, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Barry-Camerra, M. and Granger, Éric.
2007.
« Face recognition in video using a what-and-where fusion neural network ».
In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007)
pp. 2255-2260.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bengharabi, M., Harizi, F., Cheriet, Mohamed and Guessoum, A..
2007.
« A framework for a GMM-UBM based speaker verification and the need of a large Arabic datebase ».
In 9th International Symposium on Signal Processing and its Applications (ISSPA) (Sharjah, United Arab Emirates, Feb. 12-15, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bigras, Pascal, Lambert, Michel and Perron, Claude.
2007.
« New formulation for an industrial robot impedance controller: Real-time implementation on a KUKA robot ».
In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Montreal, Canada, Oct. 7-10, 2007)
pp. 2782-2787.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Botez, Ruxandra, Hiliuta, A. and Grigorie, L..
2007.
« Simulation method for rigid and control modes aeroservoelastic interactions ».
In Proceedings of the IASTED International Conference on Modelling, Identification, and Control, MIC (Innsbruck, Austria, Feb.12-14, 2007)
pp. 229-233.
Calgary, Canada : ACTA Press.
Botez, Ruxandra and Rotaru, M..
2007.
« Analysis of flying qualities for an F/A-18 aircraft ».
In Proceedings of the 16th IASTED International Conference on Applied Simulation and Modelling (Palma de Mallorca, Spain, Aug. 29-31, 2007)
pp. 219-223.
Calgary, Canada : ACTA Press.
Cheriet, Mohamed.
2007.
« Strategies for visual Arabic handwriting recognition, issues and case study ».
In 9th International Symposium on Signal Processing and its Applications (ISSPA) (Sharjah, United Arab Emirates, Feb. 12-15, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Coetzer, Hanno and Sabourin, Robert.
2007.
« A human-centric off-line signature verification system ».
In 9th International Conference on Document Analysis and Recognition (ICDAR) (Curitiba, Brazil, Sept. 23-26, 2007)
pp. 153-157.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
De Jesus Mota, S., Nadeau-Beaulieu, M., Botez, Ruxandra and Brenner, M..
2007.
« Modeling of structural deflections on a F/A-18 aircraft following flight flutter tests by use of subspace identification method ».
In AIAA Atmospheric Flight Mechanics Conference and Exhibit (Hilton Head, SC, USA, Aug. 20-23, 2007)
Coll. « AIAA paper »
pp. 42-53.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Desroches, G., Aissaoui, Rachid, Boukhelif, M. and Bourbonnais, D..
2007.
« Measurement uncertainties during manual wheelchair propulsion and shoulder kinetics ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montréal, Canada, May 30-June 1, 2007)
pp. 618-623.
Calgary, Canada : ACTA Press.
dos Santos, Eulanda M., Sabourin, Robert and Maupin, Patrick.
2007.
« Ambiguity-guided dynamic selection of ensemble of classifiers ».
In 10th International Conference on Information Fusion (Quebec, Canada, Jul. 9-12, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Figielski, Alexandre, Bonev, Ilian and Bigras, Pascal.
2007.
« Towards development of a 2-DOF planar parallel robot with optimal workspace use ».
In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Montreal, Canada, Oct. 7-10, 2007)
pp. 1562-1566.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Freitas, C. O. A., Carvalho, J. M., Oliveira, J. J. Jnr, Aires, S. B. K. and Sabourin, Robert.
2007.
« Distance-based disagreement classifiers combination ».
In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007)
pp. 2729-2733.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kapp, Marcelo N., Sabourin, Robert and Maupin, Patrick.
2007.
« An empirical study on diversity measures and margin theory for ensembles of classifiers ».
In 10th International Conference on Information Fusion (Quebec, Canada, Jul. 9-12, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Khayati, Karim and Bigras, Pascal.
2007.
« A new model-based dynamic feedback control for systems with friction ».
In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Montreal, Canada, Oct. 7-10, 2007)
pp. 2710-2715.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ko, Albert Hung-Ren, Sabourin, Robert and de Souza Britto, Alceu.
2007.
« K-nearest oracle for dynamic ensemble selection ».
In 9th International Conference on Document Analysis and Recognition (ICDAR) (Curitiba, Brazil, Sept. 23-26, 2007)
pp. 422-426.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Latombe, Guillaume, Granger, Éric and Dilkes, Fred A..
2007.
« Incremental learning of stochastic grammars with graphical EM in radar electronic support ».
In IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) (Honolulu, HI, USA, April 15-20, 2007)
pp. 301-304.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Mascle, Christian, Lu, Hua and Maranzana, Roland.
2007.
« Machining process planning using decomposition of delta volume ».
In IEEE International Symposium on Assembly and Manufacturing (Ann Arbor, MI, USA, Jul. 22-25, 2007)
pp. 106-111.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Menasri, F., Vincent, N., Augustin, E. and Cheriet, Mohamed.
2007.
« Shape-based alphabet for off-line Arabic handwriting recognition ».
In 9th International Conference on Document Analysis and Recognition (ICDAR) (Curitiba, Brazil, Sept. 23-26, 2007)
pp. 969-973.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Nadeau Beaulieu, M., De Jesus Mota, S. and Botez, Ruxandra.
2007.
« Flight model identification of an F/A-18 from flight tests ».
In 17th IFAC Symposium on Automatic Control in Aerospace (ACA) (Toulouse, France, June 25-29, 2007)
pp. 212-216.
Laxenburg, Australia : International Federation of Automatic Control.
Oliveira, Luiz S., Justino, Edson and Sabourin, Robert.
2007.
« Off-line signature verification using writer-independent approach ».
In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007)
pp. 2538-2543.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Radtke, P.V., Sabourin, Robert and Wong, Tony.
2007.
« Annealing based approach to optimize classification system ».
In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007)
pp. 2616-2620.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ramudhin, Amar, Chan, Eric and Mokadem, Abdelkader.
2007.
« A framework for the modelling, analysis and optimization of pathways in healthcare ».
In International Conference on Service Systems and Service Management (SSSM) (Troyes, France, Oct. 25-27, 2006)
pp. 698-702.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Sehad, A., Mezai, L., Laskri, M.T. and Cheriet, Mohamed.
2007.
« Skew angle estimation of printed document using linear regression, wavelet transform, and anisotropic diffusion ».
In 9th International Symposium on Signal Processing and its Applications (ISSPA) (Sharjah, United Arab Emirates, Feb. 12-15, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Tchikou, Mahmoud, Gouarderes, Eric, Ramudhin, Amar, Artiba, Abdelhakim and Lamarque, Nicholas.
2007.
« Agent-based approach for manufacturing dynamic scheduling ».
In International Conference on Service Systems and Service Management (SSSM) (Troyes, France, Oct. 25-27, 2006)
pp. 834-840.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Adane, Yacine, Man-Fai, Wong, Kouki, Ammar B., Wiart, Joe and Hanna, V. F..
2007.
« Efficient back-propagation techniques based on spherical harmonics and plane waves decomposition for the near field assessment of base station antennas ».
In IEEE Antennas and Propagation Society International Symposium (Honolulu, HI, USA, June 9-15, 2007)
pp. 413-416.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Agba, B. L., Gagnon, François and Kouki, Ammar B..
2007.
« Effects of double mobility over channel statistics and system performances in high dynamic ad hoc networks ».
In IEEE Antennas and Propagation Society International Symposium (Honolulu, HI, USA, June 9-15, 2007)
pp. 5347-5350.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bel Haj Youssef, N. and Al Haddad, Kamal.
2007.
« A DSP-based implementation of a nonlinear model reference adaptive control for a 1.5 kW three- phase three-level boost-type Vienna rectifier ».
In 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON) (Taipei, Taiwan, Nov. 5-8, 2007)
pp. 1743-1748.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Belley, L. P., Gabrea, Marcel and Gargour, Christian.
2007.
« Continuous wavelet transform based source separation ».
In IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) (Montreal, Canada, Aug. 5-8, 2007)
pp. 365-368.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ben Sik Ali, O., Agba, Basile L., Cardinal, C. and Gagnon, François.
2007.
« Performances simulation of flat fading channels in mobile ad hoc networks ».
In International Symposium on Signals, Systems and Electronics (ISSSE) (Montreal, Canada, Jul. 30-Aug. 2, 2007)
pp. 189-191.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Blanchette, Handy Fortin and Al Haddad, Kamal.
2007.
« Leakage inductance calculation for high power density converters applications ».
In 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON) (Taipei, Taiwan, Nov. 5-8, 2007)
pp. 1402-1407.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Boufaden, Narjès, Hoang, Truong Le and Dumouchel, Pierre.
2007.
« Détection et prédiction de la satisfaction des usagers dans les dialogues personne-machine ».
In Actes sur le Traitement Automatique des Langues Naturelles (TALN) (Toulouse, France, 5-8 juin 2007)
Montréal, Qué., Canada : CRIM.
Chartier, Sylvain, Giguere, Gyslain, Renaud, Patrice, Lina, Jean-Marc and Proulx, Robert.
2007.
« FEBAM: a feature-extracting bidirectional associative memory ».
In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007)
pp. 1679-1684.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Châtelain, Benoît and Gagnon, François.
2007.
« Multiplierless evolutionary filter design ».
In International Symposium on Signals, Circuit and Systems (ISSCS) (Iasi, Romania, Jul. 13-14, 2007)
pp. 177-180.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Chatelain, B., Gagnon, François and Kouki, Ammar B..
2007.
« A systemic approach to combined linearization and efficiency improvement for power amplifiers ».
In European Microwave Conference (EuMC) (Munich, Germany, Oct. 9-12, 2007)
pp. 190-193.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Châtelain, B., Mannor, S., Gagnon, François and Plant, D. V..
2007.
« Non-cooperative design of translucent networks ».
In IEEE Global Telecommunications Conference (GLOBECOM) (Washington, DC, USA, Nov. 26-30, 2007)
pp. 2348-2352.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Cherif, A. R., Hina, M. D., Tadj, Chakib and Levy, N..
2007.
« Analysis of a new ubiquitous multimodal multimedia computing system ».
In Ninth IEEE International Symposium on Multimedia (ISM) (Taichung, Taïwan, Dec. 10-12, 2007)
pp. 161-168.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
El-Asmar, M., Birafane, A. and Kouki, Ammar B..
2007.
« Impact of PA mismatching in chireix-outphasing system without stubs ».
In International Symposium on Signals, Systems and Electronics (ISSSE) (Montreal, Canada, Jul. 30-Aug. 2, 2007)
pp. 201-204.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
François, Véronique and Aboutorabi, S. S..
2007.
« Fracture strength of air-clad microstruetured fibers ».
In Conference on Optical Fiber Communication and the National Fiber Optic Engineers Conference (OFC/NFOEC) (Anaheim, CA, USA, March 25-29, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Futcha, S., Thibeault, Claude and Gagnon, François.
2007.
« Predicting CPU requirements with variability equations of Zf-Sqrd and rake receiver in a DSP context ».
In IEEE Northeast Workshop on Circuits and Systems (NEWCAS) (Montreal, Canada, Aug. 5-8, 2007)
pp. 1209-1212.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Futcha, Sandrine, Thibeault, Claude, Gagnon, François and Agba, Basile L..
2007.
« Extraction of primitives from ZF-SQRD algorithm for a DSP platform ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Vancouver, Canada, April 22-26, 2007)
pp. 1046-1049.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Gagnon, Ghyslain and MacEachern, Leonard.
2007.
« Continuous compensation of binary-weighted DAC nonlinearities in bandpass delta-sigma modulators ».
In IEEE International Symposium on Circuits and Systems (ISCAS) (New Orleans, LA, USA, May 27-30, 2007)
pp. 253-256.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Grandmaison, M.E. and Gagnon, François.
2007.
« Channel estimation algorithms for uplink OFDMA tiles ».
In IEEE International Symposium on Wireless Pervasive Computing (ISWPC) (San Juan, PR, USA, Feb. 5-7, 2007)
pp. 16-19.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Hamadi, A., Rahmani, S. and Al Haddad, Kamal.
2007.
« A novel hybrid series active filter for power quality compensation ».
In IEEE Power Electronics Specialists Conference (PESC) (Orlando, FL, USA, June 17-21, 2007)
pp. 1099-1104.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Hamdane, W., Birafane, A., Kouki, Ammar B. and Gagnon, François.
2007.
« Linearization of class B amplifier and application to outphasing systems ».
In International Symposium on Signals, Systems and Electronics (ISSSE) (Montreal, Canada, Jul. 30-Aug. 2, 2007)
pp. 543-546.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hamdane, W., Birafane, A., Kouki, Ammar B. and Gagnon, François.
2007.
« An adaptive MILC amplification system for adaptive MQAM transmitters ».
In IEEE International Conference on Signal Processing and Communications (ICSPC) (Dubai, United Arab Emirates, Nov. 24-27, 2007)
pp. 780-783.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hamdane, W., El-Asmar, M., Birafane, A. and Kouki, Ammar B..
2007.
« Investigation of efficiency vs. linearity trade-offs in LINC amplifiers for varying outphasing combiner reactances ».
In 14th IEEE International Conference on Electronics, Circuits and Systems (ICECS) (Marrakech, Morocco, Dec.11-14, 2007)
pp. 274-277.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Hamouda, Mahnoud, Fnaiech, Farhat and Al-Haddad, Kamal.
2007.
« A DSP based real-time simulation of dual-bridge matrix converters ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Vigo, Spain, June 4-7, 2007)
pp. 594-599.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Jinfang, Zhang, Dziong, Zbigniew, Gagnon, François and Kadoch, Michel.
2007.
« Performance evaluation of a multiuser detection based MAC design for ad hoc networks ».
In IEEE 66th Vehicular Technology Conference (VTC) (Baltimore, MD, USA, Sept. 30-Oct. 3, 2007)
pp. 294-298.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, Hadi Y., Hayek, Alfred and Al Haddad, Kamal.
2007.
« Small-signal average modeling, simulation and carrier-based linear control of a three-phase four-leg shunt active power filter ».
In IEEE International Electric Machines and Drives Conference (IEMDC) (Antalya, Turkey, May 3-5, 2007)
pp. 601-607.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Kanaan, H. Y., Hayek, A. and Al Haddad, Kamal.
2007.
« A new single-phase power factor corrector based on the SEPIC and Sheppard-Taylor topologies ».
In 29th International Telecommunications Energy Conference (INTELEC) (Rome, Italy, Sept. 30-Oct. 4, 2007)
pp. 840-847.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, H. Y., Hayek, A. and Al Haddad, Kamal.
2007.
« Averaged-model-based nonlinear control of a PWM three-phase four-leg shunt active power filter ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Vancouver, Canada, April 22-26, 2007)
pp. 1002-1005.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, Hadi Y., Hayek, Alfred and Al Haddad, Kamal.
2007.
« Averaged model based control of a sheppard-taylor PFC with nonlinearity compensation ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Vancouver, Canada, April 22-26, 2007)
pp. 1006-1009.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, Hadi Y., Hayek, Alfred and Al Haddad, Kamal.
2007.
« Small-signal averaged model and carrier-based linear control of a sheppard-taylor PFC ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Vigo, Spain, June 4-7, 2007)
pp. 527-532.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, Hadi Y., Hayek, Alfred and Al Haddad, Kamal.
2007.
« Comparative study of two average-model-based PWM control schemes for a sheppard-taylor PFC ».
In IEEE Power Electronics Specialists Conference (PESC) (Orlando, FL, USA, June 17-21, 2007)
pp. 2893-2898.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, H. Y., Hayek, A., Al Haddad, Kamal and Rahmani, S..
2007.
« Carrier-based linear decoupling control of a three-phase four-leg shunt active power filter ».
In 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON) (Taipei, Taiwan, Nov. 5-8, 2007)
pp. 1839-1844.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kedjar, B. and Al Haddad, Kamal.
2007.
« LQR with integral action to enhance dynamic performance of three-phase three-wire shunt active filter ».
In IEEE Power Electronics Specialists Conference (PESC) (Orlando, FL, USA, June 17-21, 2007)
pp. 1138-1144.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Lafi, Sabeur, Kouki, Ammar B., Belzile, Jean and Ghazel, Adel.
2007.
« Towards a coherent framework for automated RF front-end design using hardware abstraction ».
In 16th IST Mobile and Wireless Communications Summit (Budapest, Hungary, Jul. 1-5, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Loyka, Sergey and Gagnon, François.
2007.
« On accuracy and efficiency of Monte-Carlo BER simulations for fading channels ».
In International Symposium on Signals, Systems and Electronics (ISSSE) (Montreal, Canada, Jul. 30-Aug. 2, 2007)
pp. 255-258.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Mandache, L. and Al Haddad, Kamal.
2007.
« An accurate design tool for filter inductors ».
In 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON) (Taipei, Taiwan, Nov. 5-8, 2007)
pp. 1414-1419.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Nerguizian, Chahé and Nerguizian, Vahé.
2007.
« Indoor fingerprinting geolocation using wavelet-based features extracted from the channel impulse response in conjunction with an artificial neural network ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Vigo, Spain, June 4-7, 2007)
pp. 2028-2032.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ngantchaha, Ghislain, Tadj, Chakib and Ramdane-Cherif, Amar.
2007.
« Contextguard: a multiagent system for controlling context ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 1698-1701.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Nguyen-Due, Huy, Dessaint, Louis-A. and Okou, Aime Francis.
2007.
« A power system damping controller based on identification of critical oscillations ».
In IEEE Power Engineering Society General Meeting (PES) (Tampa, FL, USA, June 24-28, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ourari, M. L., Dessaint, Louis-A. and Do, V. Q..
2007.
« Integration of dynamic equivalents in hypersim power system simulator ».
In IEEE Power Engineering Society General Meeting (PES) (Tampa, FL, USA, June 24-28, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rahmani, S., Hamadi, A. and Al Haddad, Kamal.
2007.
« A new three phase hybrid passive filter to dampen resonances and compensate harmonics and reactive power for any type of load under distorted source conditions ».
In IEEE Power Electronics Specialists Conference (PESC) (Orlando, FL, USA, June 17-21, 2007)
pp. 2594-2599.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rezki, Z., Haccoun, David, Gagnon, François and Ajib, Wessam.
2007.
« A tight lower bound on the outage probability of spatially correlated MIMO channels ».
In IEEE 65th Vehicular Technology Conference (VTC) (Dublin, ireland, April 22-25, 2007)
pp. 2058-2062.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ruelland, François and Al Haddad, Kamal.
2007.
« Two methods for the optimization of subway tunnel profiles ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 251-254.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Saad, Maarouf, Saydy, Lahcen, Piedboeuf, Jean Claude and Akhrif, Ouassima.
2007.
« Passivity based control of a one flexible link ».
In Proceedings of the Ninth IASTED International Conference on Control and Applications (Montreal, Canada, May 30-June 1, 2007)
pp. 284-289.
Calgary, Canada : ACTA Press.
Santana, W.C., Al Haddad, Kamal, Rahmani, S., Fnaiech, F. and da Silva, L.E.B..
2007.
« An active resonance damper for distribution systems using an ARIMAX parameter estimator ».
In IEEE Canada Electrical Power Conference (EPC) (Montreal, Canada, Oct. 25-26, 2007)
pp. 290-295.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Sedraoui, Khaled, Fnaiech, Farhat and Al Haddad, Kamal.
2007.
« Application of the instantaneous power with the symmetrical components theory to control unbalanced and non-sinusoidal three phase power system ».
In IEEE Power Engineering Society General Meeting (PES) (Tampa, FL, USA, June 24-28, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Gairola, Sanjay, Chandra, Ambrish and Al Haddad, Kamal.
2007.
« Zigzag connected autotransformer based controlled AC-DC converter for pulse multiplication ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Vigo, Spain, June 4-7, 2007)
pp. 889-894.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Kasal, Gaurav, Chandra, Ambrish and Al Haddad, Kamal.
2007.
« Battery based voltage and frequency controller for parallel operated isolated asynchronous generators ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Vigo, Spain, June 4-7, 2007)
pp. 883-888.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Kasal, Gaurav Kumar, Chandra, Ambrish and Al Haddad, Kamal.
2007.
« Improved power quality based controller for a 3-Phase 4-Wire isolated wind energy system ».
In IEEE Canada Electrical Power Conference (EPC) (Montréal, Canada, Oct. 25-26, 2007)
pp. 531-536.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, B., Sanjay, Gairola, Chandra, Ambrish and Al Haddad, Kamal.
2007.
« Power quality improvements in isolated twelve-pulse AC-DC converters using delta/double-polygon transformer ».
In IEEE Power Electronics Specialists Conference (PESC) (Orlando, FL, USA, June 17-21, 2007)
pp. 2848-2453.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Thibeault, Claude.
2007.
« On a new outlier rejection technique ».
In IEEE VLSI Test Symposium (Berkeley, CA, USA, May 6-10, 2007)
pp. 97-103.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Tran, Côn and Dziong, Zbigniew.
2007.
« Service overlay network resource adaptations based on an economic model ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 1821-1824.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Youssef, N.B.H.. and Al Haddad, Kamal.
2007.
« Application of the new quasi-linear control theory to the AC current shaping and DC voltage regulation of a three-phase boost-type AC/DC Vienna converter under very severe operating conditions ».
In International Conference on "Computer as a Tool" (EUROCON) (Warsaw, Poland, 9-12 sept. 2007)
pp. 1336-1343.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Zouidi, Abdelaziz, Fnaiech, Farhat and Al Haddad, Kamal.
2007.
« A multi-layer neural network and an adaptive linear combiner for online harmonic tracking ».
In IEEE International Symposium on Intelligent Signal Processing (Alcala de Henares, Spain, Oct. 3-5, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bégnoche, Luc, Abran, Alain and Buglione, Luigi.
2007.
« A measurement approach integrating ISO 1539 CMMI and ISBSG ».
In Software Measurement European Forum (SMEF) (Rome, Italy, May 9-11, 2007)
pp. 111-130.
Buglione, Luigi and Abran, Alain.
2007.
« Improving estimations in agile projects: issues and avenues ».
In Software Measurement European Forum (SMEF) (Rome, Italy, May 9-11, 2007)
pp. 265-274.
Caron, François, Coulombe, Stéphane and Wu, Tao.
2007.
« A transcoding server for the home domain ».
In IEEE International Conference on Portable Information Devices (Orlando, FL, USA, May 25-29, 2007)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Coallier, François.
2007.
« A vision for international standardization in software and systems engineering ».
In 6th International Conference on the Quality of Information and Communication Technology (QUATIC) (Lisbon, Portugal, Sept. 12-14, 2007)
pp. 3-11.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Idri, A., Abran, Alain and Mendes, E..
2007.
« Fuzzy radial basis function neural networks for web applications cost estimation ».
In 4th International Conference on Innovations in Information Technology (IIT) (Dubai, United Arab Emirates, Nov. 18-20, 2007)
pp. 576-580.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Idri, A., Zahi, A. and Abran, Alain.
2007.
« Impacts des techniques de construction des ensembles flous sur la précision d'un modèle d'estimation des coûts de logiciels par analogie floue ».
In International Conferences : Sciences of Electronic, Technologies of Information and Telecommunications (SETIT) (Hammamet, Tunisia, March 25-29, 2007)
Ortiz, Carlos, Skorek, Adam, Lavoie, Michel and Benard, Pierre.
2007.
« Parallel CFD analysis of conjugate heat transfer in a dry type transformer ».
In Conference Record of the 2007 IEEE Industry Applications Conference. 42nd IAS Annual Meeting (New Orleans, LA, USA, Sept. 23-27, 2007)
pp. 985-988.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ouanouki, Rafik and April, Alain.
2007.
« IT process conformance measurement : a sarbanes-oxley requirement ».
In Proceedings of the IWSM - Mensura 2007 (Palma de Mallorca, Spain, Nov. 5-8, 2007)
pp. 26-37.
Taleb, M., Seffah, A. and Abran, Alain.
2007.
« Patterns-oriented design applied to cross-platform web-based interactive systems ».
In IEEE International Conference on Information Reuse and Integration (IRI) (Las Vegas, NV, USA, Aug.13-15, 2007)
pp. 122-127.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ateme-Nguema, B. H. and Dao, Thien-My.
2007.
« Optimization of cellular manufacturing systems design using the hybrid approach based on the ant colony and tabu search techniques ».
In IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapore, Singapore, Dec. 2-4, 2007)
pp. 668-673.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Bellizi, Thibault, Boisvert, Jonathan, Champliaud, Henri and Dao, Thien-My.
2007.
« Estimation of the pressing force in blade forming application ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007)
pp. 272-277.
Calgary, Canada : ACTA Press.
Bouzid, Abdel-Hakim, Birembaut, Yves and Lejeune, Hubert.
2007.
« On the effect of external bending loads in bolted flange joints ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 115-123.
New York, NY, USA : American Society of Mechanical Engineers.
Charette, O, Champliaud, Henri and Thomas, Marc.
2007.
« FEM calculation of frequencies variation caused by residual stress distribution in welded structures ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007)
pp. 446-451.
Calgary, Canada : ACTA Press.
Corriveau, G., Guilbault, Raynald and Tahan, Antoine.
2007.
« Genetic algorithms and finite element coupling for mechanical optimization ».
In 10th International Conference on Optimum Design in Engineering (OPTI) (Myrtle Beach, USA, May 7- 9, 2007)
pp. 87-96.
Southampton, UK : WITPress.
Dalpé, Benoit and Masson, Christian.
2007.
« Recommended practices when analyzing wind flow near a forest edge with wasp ».
In European Wind Energy Conference and Exhibition (EWEC) (Milan, Italy, May 7-10, 2007)
David, Éric, Lamarre, L and Nguyen, D.N..
2007.
« Measurements of polarization/depolarization currents for modern epoxy-mica bars in different conditions ».
In Electrical Insulation Conference and Electrical Manufacturing Expo (EIC) (Nashville, TN, USA, Oct. 22-24, 2007)
pp. 189-193.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Diany, Mohammed and Bouzid, Hakim.
2007.
« Short term relaxation of stuffing box packings ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 159-164.
New York, NY, USA : American Society of Mechanical Engineers.
Feng, Zhengkun, Champliaud, Henri, Zeng, J. and Dao, Thien-My.
2007.
« Investigation of influence of sliding of rolls over plate on continuous bending with noncompatible conical rolls ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montréal, Canada, May 30-June 1, 2007)
pp. 527-531.
Calgary, Canada : ACTA Press.
Feng, Zhengkun and Soulaïmani, Azzeddine.
2007.
« Investigations of nonlinear aeroelasticity using a reduced order fluid model based on POD method ».
In 18th AIAA Computational Fluid Dynamics Conference (Miami, FL, USA, June 25-28, 2007)
Coll. « AIAA paper »
pp. 1265-1270.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Laghzale, Nor Eddine and Bouzid, Hakim.
2007.
« Analytical modeling of hydraulically expanded tube-to-tubesheet joints ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 233-242.
New York, NY, USA : American Society of Mechanical Engineers.
Lamarre, L, David, Éric and Nguyen, D.N..
2007.
« Temperature and voltage dependence of dielectric properties of modern epoxy-mica insulations of HV rotating machines ».
In Electrical Insulation Conference and Electrical Manufacturing Expo (EIC) (Nashville, TN, USA, Oct. 22-24, 2007)
pp. 179-182.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Lê, Van Ngan, Champliaud, Henri and Amri, Brahim.
2007.
« A hysteresis approach of thermal expansion effect on residual stresses due to welding ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007)
pp. 521-526.
Calgary, Canada : ACTA Press.
Martin, Francis, Lê, Van Ngan, Champliaud, Henri and Nguyen, Hoa Ngan.
2007.
« Stress concentration of shrink fit assembly using finite element method ».
In Proceedings of the IASTED Asian Conference on Modelling and Simulation (Beijing, China, Oct. 8-10, 2007)
pp. 67-70.
Calgary, Canada : ACTA Press.
Morey, F., Seers, Patrice and Gardiner, D..
2007.
« Comparison of the cyclic variability of an exhaust gas temperature sensor and in-cylinder pressure measurements ».
In ASME/IEEE Joint Rail Conference and the ASME Internal Combustion Engine Division, Spring Technical Conference (JRC/ICE) (Pueblo, CO, USA, March 13-16, 2007)
pp. 351-359.
New York, NY, USA : American Society of Mechanical Engineers.
Nasri, Hassan, Lanteigne, Jacques and Champliaud, Henri.
2007.
« Usage of the contour method in measuring residual stress in welding and peen-welding applications ».
In Proceedings of the IASTED Asian Conference on Modelling and Simulation (Beijing, China, Oct. 8-10, 2007)
pp. 89-95.
Calgary, Canada : ACTA Press.
Sun, Y., Thomas, Marc and Masounave, Jacques.
2007.
« Experimental investigation of dielectric properties on electrorheological fluids ».
In International Conference on Smart Materials and Nanotechnology in Engineering (SMN) (Harbin, China, Jul. 1-4, 2007)
Coll. « Proceedings of SPIE », vol. 6423.
Bellingham, WA, USA : SPIE - The International Society for Optical Engineering.
Zhao, Jian Hua, Champliaud, Henri and Dao, Thien-My.
2007.
« Simulation of shear spinning process using finite element method ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007)
pp. 239-245.
Calgary, Canada : ACTA Press.
Zhao, Jian-Hua, Champliaud, Henri and Dao, Thien-My.
2007.
« Simulation of shear spinning process for pressure vessel components ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 569-576.
New York, NY, USA : American Society of Mechanical Engineers. Imbriglio, TV., Fuentes, A. and de Guise, Jacques A.. 2007. « Impact d'une rupture du LCA sur la cinétique et les paramètres spatiotemporels lors de la marche ». Affiche numéro 69 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007). Lau, C., Lessard, S., Soulez, G. and de Guise, Jacques A.. 2007. « Suivi du guide sur images fluoroscopiques d'interventions neuroradiologiques ». Affiche numéro 82 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007). Marchane, I., de Guise, Jacques A., Cloutier, G. and Lerouge, Sophie. 2007. « Segmentation de coupes histologiques pour l'analyse histomorphométrique de plaques d'athérosclérose ». Affiche numéro 9 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007). Fuentes, A., Hagemeister, Nicola, Ranger, P., Heron, T. and de Guise, Jacques A.. 2007. « Augmentation du moment adducteur suite à une rupture du ligament croisé antérieur ». Affiche numéro 59 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007). Labbé, D., Hagemeister, Nicola, Fernades, J. and de Guise, Jacques A.. 2007. « Développement et validation d'un outil de mesure du phénomène de Pivot Shift dans le genou : résultats préliminaires ». Affiche numéro 76 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007).
Barry, M. and Granger, Éric.
2007.
« Comparison of ARTMAP neural networks for classification for face recognition from video ».
In Image Analysis and Recognition : 4th International Conference, ICIAR 2007, Montreal, Canada, August 22-24, 2007. Proceedings (Montreal, Canada, Aug. 22-24, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4633.
pp. 794-805.
Heidelberg, Germany : Springer Verlag.
Doré, Vincent, Duong, Luc, Cheriet, Farida and Cheriet, Mohamed.
2007.
« Towards segmentation of pedicles on posteroanterior X-ray views of scoliotic patients ».
In Image Analysis and Recognition : 4th International Conference, ICIAR 2007, Montreal, Canada, August 22-24, 2007. Proceedings (Montreal, Canada, Aug. 22-24, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4633.
pp. 1028-1039.
Heidelberg, Germany : Springer Verlag.
Freitas, Cinthia O. A., De Carvalho, Joao M., Oliveira Jr, Jose Josemar, Aires, Simone B. K. and Sabourin, Robert.
2007.
« Confusion matrix disagreement for multiple classifiers ».
In Progress in Pattern Recognition, Image Analysis and Applications :12th Iberoamericann Congress on Pattern Recognition, CIARP 2007, Valparaiso, Chile, November 13-16, 2007. Proceedings (Vina del Mar-Valparaiso, Chile, Nov.13-16, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4756.
pp. 387-396.
Heidelberg, Germany : Springer Verlag.
Ko, Albert Hung Ren, Sabourin, Robert and de Souza Britto, Alceu.
2007.
« Applying pairwise fusion matrix on fusion functions for classifier combination ».
In Multiple Classifier Systems 7th International Workshop, MCS 2007, Prague, Czech Republic, May 23-25, 2007. Proceedings (Prague, Czech Republic, May 23-25, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4472.
pp. 302-311.
Heidelberg, Gremany : Springer.
Ko, Albert Hung-Ren, Sabourin, Robert and de Souza Britto, Alceu.
2007.
« A new HMM-based ensemble generation method for numeral recognition ».
In Multiple Classifier Systems 7th International Workshop, MCS 2007, Prague, Czech Republic, May 23-25, 2007. Proceedings (Prague, Czech Republic, May 23-25, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4472.
pp. 52-61.
Heidelberg, Gremany : Springer.
Ko, Albert Hung-Ren, Sabourin, Robert and de Souza Britto, Alceu.
2007.
« A new dynamic ensemble selection method for numeral recognition ».
In Multiple Classifier Systems 7th International Workshop, MCS 2007, Prague, Czech Republic, May 23-25, 2007. Proceedings (Prague, Czech Republic, May 23-25, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4472.
pp. 431-439.
Heidelberg, Germany : Springer.
Rivest-Hénault, David and Cheriet, Mohamed.
2007.
« Image segmentation using level set and local linear approximations ».
In Image Analysis and Recognition : 4th International Conference, ICIAR 2007, Montreal, Canada, August 22-24, 2007. Proceedings (Montreal, Canada, Aug. 22-24, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4633.
pp. 234-245.
Berlin, Germany : Springer-Verlag.
Awde, Ali, Hina, Manolo Dulva, Bellik, Yacine, Ramdane-Cherif, Amar and Tadj, Chakib.
2007.
« Task migration in a pervasive multimodal multimedia computing system for visually-impaired users ».
In Advances in Grid and Pervasive Computing : Second International Conference, GPC 2007, Paris, France, May 2-4, 2007. Proceedings (Paris, France, May 2-4, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4459.
pp. 459-471.
Berlin, Germany : Springer.
Tran, Con, Dziong, Zbigniew and Pioro, Michal.
2007.
« SLA adaptation for service overlay networks ».
In NETWORKING 2007. Ad Hoc and Sensor Networks, Wireless Networks, Next Generation Internet : 6th International IFIP-TC6 Networking Conference, Atlanta, GA, USA, May 14-18, 2007. Proceedings (Atlanta, GA, USA, May 14-18, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4479.
pp. 691-702.
Heidelberg, Germany : Springer Verlag.
Tran, Con, Sarker, Jahangir and Dziong, Zbigniew.
2007.
« Distributed resource adaptation for virtual network operators ».
In Distributed Computing and Internet Technology : 4th International Conference, ICDCIT 2007, Bangalore, India, December 17-20.
Proceedings (Bangalore, India, Dec. 17-20, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4882.
pp. 146-157.
Heidelberg, Germany : Springer-Verlag.
Bogdadi, Guy, éd.
2007.
« 5e Conférence internationale en automatisation industrielle ».
Montréal, Canada : Association internationale pour l'automatisation industrielle . Duke, K., Bryant, T. and Petit, Yvan. 2007. « Analyse biomécanique d’un système de fixation du grand trochanter ». Affiche présentée lors de la conférence : VIIe Journée de la Recherche de l’Hôpital du Sacré-Coeur de Montréal (Montréal, QC, Canada, 22 juin 2007).
Masounave, Jacques, Jallais, Y. and Welter, J.-M..
2007.
« Étude du comportement des matériaux ductiles et des matériaux fragiles lors du perçage à haute vitesse ».
Matériaux et Techniques, vol. 95, nº 6.
pp. 331-342.
Madrala, A. and Nuño, Natalia.
2007.
« Effect of stem and bone cement initial temperature in cemented THA on maximum temperatures and radial stresses at stem/cement interface during PMMA polymerization ».
[Conference paper]. Computer Methods in Biomechanics and Biomedical Engineering, vol. 10, nº Suppl. 1.
pp. 45-46.
Madrala, A., Nuño, Natalia and Bureau, M. N..
2007.
« Microstructure study on bone cement mantle polymerised in an idealized specimen of cemented hip implants with different initial temperature of the stem and bone cement ».
[Conference paper]. Computer Methods in Biomechanics and Biomedical Engineering, vol. 10, nº Suppl. 1.
pp. 67-68.
Taleb, Mohamed, Seffah, Ahmed and Abran, Alain.
2007.
« Model-driven architecture for web applications ».
In Human-Computer Interaction. Interaction Design and Usability 12th International Conference, HCI International 2007, Beijing, China, July 22-27, 2007, Proceedings, Part I (Beijing, China, Jul. 22-27, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4550.
pp. 1198-1205.
Berlin, Germany : Springer-Verlag.
Brailovski, Vladimir, Prokoshkin, S. D., Bastarash, E., Demers, V., Inaekyan, K. E. and Khmelevskaya, I. Yu.
2007.
« Thermal stability and nanocrystallization of amorphous Ti-Ni alloys prepared by cold rolling and post-deformation annealing ».
In THERMEC 2006
Coll. « Materials Science Forum », vol. 539-543.
pp. 1964-1970.
Switzerland : Trans Tech Publications Ltd.
Ma, Irwin, Wong, Tony and Sankar, Thiagas.
2007.
« Volatility forecasting using time series data mining and evolutionary computation techniques ».
In Proceedings of the 9th annual conference on Genetic and evolutionary computation (London, UK, Jul. 7-11, 2007)
p. 2262.
New York, NY, USA : Association for Computing Machinery.
Gagné, René, Belzile, Jean and Thibeault, Claude.
2007.
« Architecture for efficient GALS support in commercial FPGAs ».
In IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Montreal, QC, Canada, Aug. 5-8, 2007)
pp. 638-641.
Piscataway, N.J. : Institute of Electrical and Electronics Engineers.
Côté, Carle, Champagne, Roger and Michaud, François.
2007.
« Coping with architectural mismatch in autonomous mobile robotics ».
In Second International Workshop on Software Development and Integration in Robotics (SDIR) (Rome, Italy, Apr. 14, 2007)
Wang, Z., Parent, S., Mac-Thiong, J.-M., Petit, Yvan and Labelle, H.. 2007. « Influence of sacral morphology in L5-S1 developmental spondylolisthesis ». Communication lors de la conférence : 42e Annual Meeting of the Scoliosis Research Society (Edinburgh, Scotland, Sept. 5-8, 2007). Wang, Z., Parent, S., Mac-Thiong, J.-M., Petit, Yvan and Labelle, H.. 2007. « Influence of sacral morphology in L5-S1 developmental spondylolisthesis ». Communication lors de la conférence : 14th International Meeting on Advanced Spine Techniques (IMAST) (Paradise Islands, Bahamas, July 11-14, 2007). Vu-Khanh, Toan. 2007. « Needs and challenges for textiles in protective clothing ». Communication lors de la conférence : 101st Scientific Session of the Institute of Textile Science (Ottawa, ON, Canada, Apr. 13, 2007). Uta, E., Humbert, M., Gey, N., Hazotte, A., Bocher, Philippe and Jahazi, M.. 2007. « Description and characterisation of texture heterogeneities in titanium alloy Timetal 834 with a bimodal microstructure ». Communication lors de la conférence : World Titanium Conference (Kyoto, Japan, June 3-7, 2007). Tremblay, Christine. 2007. « Next-generation passive optical networks : from a technology and testing perspective, Panel 2 : customer driven broadband access delivery : what the network operators should do today to make money more rapidly and assure to be competitive in 5 years, 10 years and more ». Communication lors de la conférence : 2nd International Conference on Access Networks and Workshops (AccessNets) (Ottawa, ON, Canada, Aug. 21-23, 2007). Thibault-Liboiron, K., Alderliesten, R., Benedictus, R. and Bocher, Philippe. 2007. « Off-axis crack propagation and delamination growth in FML's ». Communication lors de la conférence : 6th Canadian International Conference on Composites (CANCOM) (Winnipeg, MB, Canada, Aug. 14-17, 2007). Soulez, Gilles, Lerouge, Sophie, Bonneviot, Marie-Christine and Raymond, Jean. 2007. « Ablation of endothelial lining combined to sac embolization to prevent endoleak after aneurysm endovascular repair ». Communication lors de la conférence : Radiological Society of North America Scientific Assembly and annual Meeting (RSNA) (Chicago, IL, USA, Nov. 25-30, 2007). Songmene, Victor. 2007. « Usinage propre et concurrentiel ». Communication lors de la conférence : Conférence Scientifique sur la Sécurité des Travailleurs et le Contrôle des Risques Industriels (Montréal, QC, Canada, 2007). Roy, J.-P., Assaf, Gabriel J. and St-Jacques, Michèle. 2007. « Méthodes d'évaluation des coûts aux usagers de la route au Québec ». Communication lors de la conférence : 13e Édition de la Semaine des Infrastructures Urbaines (INFRA) (Laval, QC, Canada, 5-7 nov. 2007). Ratté, Sylvie and Guilbert, David. 2007. « Augmenter la participation en classe lors d'une correction par les pairs : compte-rendu d'une expérience simple avec le PC tablette ». Communication lors de la conférence : Conférence de l'Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007).
Radtke, Paulo V. W., Sabourin, Robert and Wong, Tony.
2007.
« A quantitative comparison between MOGAs and the RRT algorithm on classification systems optimization ».
In Brazilian Meeting on Artificial Intelligence (ENIA : Encontro Nacional de Inteligência Artificial) (Rio de Janeiro, Brazil, July 3-6, 2007)
pp. 1460-1468.
Pellecuer, Luc, St-Jacques, Michèle and Assaf, Gabriel J.. 2007. « L'intégration de l'environnement dans la gestion durable des routes ». Communication lors de la conférence : 13e Édition de la Semaine des Infrastructures Urbaines (INFRA) (Laval, QC, Canada, 5-7 nov. 2007). Noumeir, Rita. 2007. « Health information exchange deployment workshop, making IHE XDS operational ». Communication lors de la conférence : IHE Canada, Health Information Exchange Deployment Workshop (Montreal, QC, Canada, Oct. 16-18, 2007). Noumeir, Rita. 2007. « The road to interoperability ». Communication lors de la conférence : IHE Canada, Education conference (Montreal, QC, Canada, Oct. 15-16, 2007). Noumeir, Rita. 2007. « DICOM SR : evidence documents, key image notes and simple image and numeric reports ». Communication lors de la conférence : IHE Workshop : Changing the Way Healthcare Connects (Chicago, IL, USA, June 11-13, 2007). Noumeir, Rita. 2007. « Distributing images : cross-enterprise document sharing for imaging (XDS-I), access to radiology information (ARI) and retrieve information for display (RID) ». Communication lors de la conférence : IHE Workshop : Changing the Way Healthcare Connects (Chicago, IL, USA, June 11-13, 2007). Noumeir, Rita. 2007. « IHE for Product Planners ». Communication lors de la conférence : The Scientific Assembly and Annual Meeting, The Radiological Society of North America (RSNA) (Chicago, IL, USA, Nov. 25-30, 2007). Nadeau, Sylvie and Hallé, Stéphane. 2007. « La prise en charge de la santé et de la sécurité du travail par les ingénieurs industriels – une obligation professionnelle ». Communication lors de la conférence : Congrès National de la Société Canadienne de Génie Industriel (Montréal, QC, Canada, 11-13 jan. 2007). Monette, Frédéric, Niquette, Patrick, Hausler, Robert, Dubé, Jean-Sébastien, Rojo, G. and Lasfar, S.. 2007. « Apprentissage par mandats (APM) : Intégration d'un client collaborateur ». Communication lors de la conférence : Colloque : L’Apprentissage par Problèmes, pour Apprendre Autrement (Chicoutimi, QC, Canada, 25 mai 2007). Monette, Frédéric. 2007. « Intervention dans le domaine de l'enseignement et de la recherche appliquée en eau dans le cadre du Projet d'appui au Centre d'Études et de Recherche en Environnement (CÉRE)- Phase II ». Communication lors de la conférence : Projet de l'Agence Canadienne de Développement International en République de Guinée (projet SRC-Sogema-UQAM-ACDI 2004-2008 (Sogema, Guinée). Minville, M., Brissette, François and Leconte, Robert. 2007. « Evaluation of impacts and uncertainty of climate change on water resource management ». Communication lors de la conférence : Asia Oceania Geosciences Society, 4th Annual Meeting (AOGS) (Bangkok, Thailand, July 30-Aug. 4, 2007). Meridji, K. and Abran, Alain. 2007. « Software requirements - application of fundamental principles ». Communication lors de la conférence : International Conference on Software Engineering and Education (ICEE) (Coimbra, Portugal, Sept. 3-7, 2007). Meridji, K. and Abran, Alain. 2007. « Software engineering principles - do they meet engineering criteria ». Communication lors de la conférence : International Conference on Software Engineering and Education (ICEE) (Coimbra, Portugal, Sept. 3-7, 2007). Ménard, P.A. and Ratté, Sylvie. 2007. « Fondements d'un prototype pour la création semi-automatisée de productions visuelles pour le génie logiciel à partir de documents corporatifs ». Communication lors de la conférence : 75e Congrès de l'ACFAS (Trois-Rivières, QC, Canada, 7-11 mai 2007). Mansour, M., Nadeau, Sylvie and Kenné, Jean-Pierre. 2007. « Sécurité des convoyeurs et intégration du cadenassage sur une ligne de production ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 15 nov. 2007). Mahbobeh, K., Kechroud, R. and Soulaïmani, Azzeddine. 2007. « Finite element analysis of an earmuff-earcanal system ». Communication lors de la conférence : Annual Conference of the Canadian Acoustical Association (CAA) (Montreal, QC, Canada, Oct. 9-12, 2007). Lepage, Richard. 2007. « Traitement informatisé de l'image pour prédire la teneur en pigments (anthocyanes) et réduction des résidus chimiques dans l'environnement d'usine alimentaire : Une technologie non-destructive ». Communication lors de la conférence : Centre de Recherche et Développement sur les Aliments (Saint-Hyacinthe, QC, Canada, 1 mai 2007). Lepage, Richard. 2007. « Impact de la variation des paramètres scéniques sur la fidélité colorimétrique d'images numériques de denrées alimentaires ». Communication lors de la conférence : Traitement et Analyse de l'Information, Méthodes et Applications (TAIMA) (Hammamet, Tunisie, 22-26 mai 2007). Leconte, Robert, Daly, S., Gauthier, Y., Yankielun, N., Bérubé, F. and Bernier, M.. 2007. « A controlled experiment to retrieve river ice characteristics from an FMCW radar system ». Communication lors de la conférence : 14th Workshop on the Hydraulics of Ice Covered Rivers (Quebec, QC, Canada, June 19-22, 2007). Laporte, Claude Y., Doucet, M., Roy, D. and Drolet, M.. 2007. « Improvement of software engineering performances : a case study at bombardier transportation - total transit system signaling group ». Communication lors de la conférence : Actual Problems of Systems and Software Engineering Seminar, International Center of Informatics and Electronics (ICIE) (Moscou, Russia, May 18, 2007). Laporte, Claude Y.. 2007. « Teaching software quality assurance in an undergraduate software engineering program ». Communication lors de la conférence : 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, QC, Canada, June 11-13, 2007). Laporte, Claude Y.. 2007. « The application of international software engineering, standards in very small enterprises ». Communication lors de la conférence : Ottawa Software Quality Association SPIN (Ottawa, ON, Canada, June 14, 2007). Lamarre, M. E., Parent, S., Labelle, H., Aubin, C. E., Cabral, A. and Petit, Yvan. 2007. « Conception d’un nouveau test standardisé pour évaluer la flexibilité de la colonne vertébrale : Premiers résultats ». Communication lors de la conférence : 37e Réunion Annuelle de la Société de la Scoliose du Québec (Montréal, QC, Canada, 11-13 oct. 2007). Jaafar, E., Petit, Yvan, Mark, L., Clément, J., Lussier, B. and Hagemeister, Nicola. 2007. « Étude cinématique de la phase d'appui au trot chez le chien : conception d'un montage expérimental ». Affiche présentée lors de la conférence : VIIe Journée de la Recherche de l’Hôpital du Sacré-Coeur de Montréal (Montréal, QC, Canada, 22 juin 2007). Hausler, Robert. 2007. « La chimie au service de l'environnement ». Communication lors de la conférence : Forum de L'Association pour le Développement de l'Industrie Chimique Québécoise (ADICQ) (Boucherville, QC, Canada, 24 mai 2007). Hallé, Stéphane. 2007. « Modélisation de mouvements d'air engendrés par les systèmes de ventilation et leurs influences sur la qualité de l'air intérieur ». Communication lors de la conférence : Conférence Scientifique sur la Sécurité des Travailleurs et le Contrôle des Risques Industriels (Montréal, QC, Canada, 18 oct. 2007). Goutaland, D., Winiarski, T., Dubé, Jean-Sébastien, Bièvre, G., Chouteau, M. and Buoncristiani, J.-F.. 2007. « On the use of geophysical methods to characterize heterogeneities of quaternary gravely sediments. Application for stormwater infiltration ». Communication lors de la conférence : International Conferences on Sustainable Techniques and Strategies for Urban Water Management (Lyon, France, June 25-28, 2007). Girard-Lauriault, P.L., Truica-Marasescu, F., Lerouge, Sophie, Mwale, F., Lippitz, A., Unger, Wes, Desjardins, P. and Wertheimer, M.R.. 2007. « Nitrogen-rich Plasma Polymers (PPE:N) for Biomedical Applications in Orthopaedic and Vascular Therapies ». Communication lors de la conférence : 1st International Conference on Plasma Medicine (ICPM-1) (Corpus Christi, TX, USA, Oct. 15-18, 2007 ). Gherboudj, I., Bernier, M., Hicks, F. and Leconte, Robert. 2007. « Physical characterization of air inclusions in river ice for the purpose of a backscatter model ». Communication lors de la conférence : 14th Workshop on the Hydraulics of Ice Covered Rivers (Quebec, QC, Canada, June 19-22, 2007). Germain, L., Vo, P., Gey, N., Jahazi, M., Humbert, M. and Bocher, Philippe. 2007. « Develpment of sharp local alpha microtectures during alpha/beta thermo-mechanical processing of Timetal 834 ». Communication lors de la conférence : 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007). Gauvin, C., Dolez, Patricia, Harrabi, L., Boutin, J., Petit, Yvan, Vu-Khanh, Toan and Lara, J.. 2007. « Gants de protection – Développement préliminaire de méthodes de mesure de l’adhérence ». Communication lors de la conférence : Premier congrès international sur l'ingénierie des risques industriels (CIRI) (Montréal, QC, Canada, 17-19 déc. 2007). Gagné, R., Belzile, Jean and Thibeault, Claude. 2007. « Architecture for efficient GALS support in commercial FPGAs ». Communication lors de la conférence : IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Montreal, QC, Canada, Aug. 5-8, 2007). Fromageau, J., Lerouge, Sophie, Maurice, R., Soulez, G. and Cloutier, G.. 2007. « Ultrasound elastography for the non-invasive characterization and follow-up of abdominal aortic aneurysms after endovascular repair ». Communication lors de la conférence : 6th International Conference on the Ultrasonic Measurement and Imaging of Tissue Elasticity (Santa Fe, NM, USA, Nov. 2-5, 2007). Forgues, Daniel and Bélisle, J.-G.. 2007. « Le benchmarking une méthode d'amélioration de la productivité pour l'industie de la construction ». Communication lors de la conférence : Superconférence sur la Construction (Montréal, QC, Canada, 28-29 nov. 2007). Forgues, Daniel. 2007. « The management of major projects ». Communication lors de la conférence : Congresso International de Ambieta y Civil Engeneria, Universidad de Guanajuato (Mexico City, Mexico, July 19, 2007). Feng, Z. and Soulaïmani, Azzeddine. 2007. « Investigations of nonlinear aeroelasticity using a reduced order fluid model based of POD method ». Communication lors de la conférence : 18th AIAA Computational Fluid Dynamics Conference (Miami, FL, USA, June 25-28, 2007). Feng, Z. and Soulaïmani, Azzeddine. 2007. « Reduced order modelling based on pod method for 3D nonlinear aerolasticity ». Communication lors de la conférence : 18th IASTED International Conference on Modelling and Simulation (MS) (Montreal, QC, Canada, May 30-June 1, 2007). Feng, Z. and Soulaïmani, Azzeddine. 2007. « Nonlinear aerolasticity modeling using a reduced order model based on proper orthogonal decomposition ». Communication lors de la conférence : ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, July 22-26, 2007). Dupuis, R., Séguin, N., Abran, Alain and Meridji, K.. 2007. « Principles of practice - development strategy ». Communication lors de la conférence : International Conference on Software Engineering and Education (ICEE) (Coimbra, Portugal, Sept. 3-7, 2007). Dupuis, R., Bourque, Pierre, Abran, Alain and Moore, J.. 2007. « In search of software engineering principles - 1996-1998 delphi studies to develop a group consensus ». Communication lors de la conférence : International Conference on Software Engineering and Education (ICEE) (Coimbra, Portugal, Sept. 3-7, 2007). Dupuis, K., Bryant, T. and Petit, Yvan. 2007. « Évaluation du comportement mécanique de l'os en fonction d'images tomodensitométriques : application sur des vertèbres porcines ». Affiche numéro 14 présentée lors de la conférence : 62e Réunion Annuelle de l’Association Canadienne d’Orthopédie (Halifax, NS, Canada, 1-3 juin 2007). Dumouchel, Pierre. 2007. « E-inclusion : la recherche au service des sourds et des aveugles ». Communication lors de la conférence : 75e Congrès de l'ACFAS (Trois-Rivières, QC, Canada, 7-11 mai 2007). Dubé, Jean-Sébastien, Boudreault, J.-P., Winiarski, T., Goutaland, D., Chouteau, M., Bièvre, G., Buoncristiani, J.-F., Giroux, B. and Gloaguen, E.. 2007. « Caractérisation environnementale et hydrodynamique des dépôts hétérogènes en milieu urbain ». Communication lors de la conférence : 1ère Conférence de l’Association des Hydrogéophysiciens du Québec (Montréal, QC, Canada, 14 sept. 2007). David, Éric, Lamarre, L. and Nguyen, D. N.. 2007. « Measurements of polarization/depolarization currents for modern epoxy-mica bars in different conditions ». Communication lors de la conférence : Electrical Insulation Conference and Electrical Manufacturing Expo (EIC) (Nashville, TN, USA, Oct. 22-24, 2007). Da Costa, Luis, Landry, Jacques-André and Levasseur, Y.. 2007. « Treating noisy data sets with relaxed genetic programming ». Communication lors de la conférence : 8th International Conference on Artificial Evolution (EA) (Tours, France, Oct. 29-31, 2007). Côté, C., Champagne, Roger and Michaud, F.. 2007. « Coping with architectural mismatch in autonomous mobile robotics ». Communication lors de la conférence : Second International Workshop on Software Development and Integration in Robotics (SDIR) (Rome, Italy, Apr. 14, 2007). Coallier, François. 2007. « Standards and best practices for process improvement ». Communication lors de la conférence : Enterprise Process Improvement Community of Practice Workshop (EPIC) (Ballston, NY, USA, Apr. 17, 2007). Coallier, François. 2007. « A vision for international standardization in software and systems engineering ». Communication lors de la conférence : International Centre of Informatics and Electronics (ICIE) (Moscou, Russia, May 18, 2007). Coallier, François. 2007. « La mondialisation du marché des TI : menaces ou opportunités? ». Communication lors de la conférence : Rencontre Thématique: « Impartition en TI À l'Étranger : le pour et le contre » CRIM (Montréal, QC, Canada, 6 juin 2007). Coallier, François. 2007. « La mondialisation des TI : menaces ou opportunités? ». Communication lors de la conférence : It Service Management Forum (ItSMF) (Montréal, QC, Canada, 19 juin 2007). Coallier, François. 2007. « Agility, standards and engineering ». Communication lors de la conférence : 5th Annual Software and Systems Engineering Process Group Australia Conference (SEPG) (Gold Coast, Australia, Aug. 28-31, 2007). Coallier, François. 2007. « A vision for international standardization in software and systems engineering ». Communication lors de la conférence : 6th International Conference on the Quality of Information and Communications Technology (QUATIC) (Lisbon, Portugal, Sept. 12-14, 2007). Coallier, François. 2007. « An Engineering perspective to IT service management ». Communication lors de la conférence : itSMF Academic Summit (Charlotte, NC, USA, Sept. 15, 2007). Coallier, François. 2007. « International standards and realtime software ». Communication lors de la conférence : 1st Senior Forum on Embedded Software Quality Measurement of Asian Area (Beijing, China, Nov. 24, 2007). Coallier, François. 2007. « L'ingénierie des compétences en TI ». Communication lors de la conférence : Ministère des Services Gouvernementaux (MSG), Gouvernement du Québec (Québec, QC, Canada, 30 oct. 2007). Coallier, François. 2007. « ÉTS software engineering program ». Communication lors de la conférence : Association des Directeurs de Genie Électrique et Informatique du Canada (DGEIC) (Quebec, QC, Canada, Nov. 5, 2007). Coallier, François. 2007. « Achievements, plans and challenges in the development of ISO/IEC standards for systems and software engineering ». Communication lors de la conférence : Mexican Electronics Telecommunications & Information Technologies Industries Chamber (Mexico City, Mexico, Nov. 8, 2007). Coallier, François. 2007. « Mondialisation du marché des Ti : menaces ou opportunités? ». Communication lors de la conférence : Colloque-Les Défis de l'Enseignement des Techniques de l'Informatique au Québec (Montréal, QC, Canada, 9 jan. 2007). Coallier, François. 2007. « La mondialisation du marché des Ti : menaces ou opportunités? ». Communication lors de la conférence : Comment Répondre au Défi de la Pénurie de Main-d'Oeuvre en Informatique? (Montréal, QC, Canada, 13 févr. 2007). Coallier, François. 2007. « L'interopérabilité et la normalisation en Ti : état de la situation internationale, normalisation en Ti et cadre commun d'interopérabilité ». Communication lors de la conférence : Ministère des Services Gouvernementaux (MSG), Gouvernement du Québec (Québec, QC, Canada, 12 mars 2007). Chion, C., Turgeon, S., Landry, Jacques-André, Parrott, L., Marceau, D., Michaud, R., Cantin, G. and Dionne, S.. 2007. « Agent-based modelling of whale-watching cruise operators’ behaviour using a cognitive approach ». Communication lors de la conférence : International Conference on Complex Systems (ICCS) (Boston, MA, USA, Oct. 28-Nov. 2, 2007). Charbonneau, C., Gautrot, J.E., Hébert, M.J., Zhu, X.X. and Lerouge, Sophie. 2007. « Development of a bioactive stent-graft coating for abdominal aortic aneurysms ». Affiche présentée lors de la conférence : Annual Meeting of the Society for Biomaterials (Chicago, IL, USA, Apr. 18-21, 2007). Chaouch, N., Leconte, Robert, Magagi, R. and Temimi, M.. 2007. « Soil moisture retrievals over the Mackenzie River basin using AMSR-E 6.9 GHz brightness temperature ». Communication lors de la conférence : International Union of Geodesy and Geophysics (IUGG) (Perugia, Italy, July 2-13, 2007). Chaabane, Amine, Benkaddour, M.A., Ramudhin, Amar and Paquet, Marc. 2007. « Incorporating safety stock considerations in supply chain design ». Communication lors de la conférence : Optimisation Days = Les Journées de l'Optimisation (Montreal, QC, Canada, May 8, 2007). Buglione, Luigi and Abran, Alain. 2007. « Improving estimations in agile projects: issues and avenues ». Communication lors de la conférence : Software Measurement European Forum (SMEF) (Rome, Italy, May 8-11, 2007). Brosseaud, Y., St-Jacques, Michèle and Leroy, C.. 2007. « Les matériaux bitumineux tièdes arrivent en ville : premières applications d'asphaltes et enrobés tièdes en ville de Paris ». Communication lors de la conférence : 13e Édition de la Semaine des Infrastructures Urbaines (INFRA) (Laval, QC, Canada, 5-7 nov. 2007). Brière-Côté, A., Rivest, Louis and Desrochers, A.. 2007. « Évolution de la structure d'un produit sur son cycle de vie dans un environnement hétérogène d'adaptation de produit à la demande ». Communication lors de la conférence : 75e Congrés de l'ACFAS (Trois-Rivières, QC, Canada, 7-11 mai 2007). Boutana, N., Bocher, Philippe, Jahazi, M., Piot, D. and Montheillet, F.. 2007. « Simulation of the mechanical behavior of hetegeogeneous materials using cellular automata ». Communication lors de la conférence : 1st International Conference of Sustainable Manufacturing (Montreal, QC, Canada, Oct. 18-19, 2007). Boutana, N., Bocher, Philippe, Jahazi, M., Piot, D. and Montheillet, F.. 2007. « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Communication lors de la conférence : 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007). Boudreault, J.-P., Dubé, Jean-Sébastien, Chouteau, M., Gloaguen, E., Winiarski, T. and Hardy, E.. 2007. « Caractérisation de l'hétérogénéité physique d'un remblai urbain contaminé par une approche géophysique croisée ». Communication lors de la conférence : 60e Conférence Géotechnique Canadienne : Le Jubilé de Diamants de la Société Canadienne de Géotechnique et de l'Association Internationale des Hydrogéologues (Ottawa, ON, Canada, 21-24 oct. 2007). Boudreault, J.-P., Dubé, Jean-Sébastien and Chouteau, M.. 2007. « Geophysical characterization of urban fills ». Communication lors de la conférence : 4th International Conference on Soils in Urban, Industrial, Traffic, Mining and Military Areas (SUITMA) (Nanjing, China, Oct. 18-27, 2007). Bonneviot, M.C., Soulez, G., Raymond, J. and Lerouge, Sophie. 2007. « Injectable sclerosing agent : a new strategy to prevent endoleak after endovascular aneurysm repair ». Affiche présentée lors de la conférence : Annual Meeting of the Society for Biomaterials (Chicago, IL, USA, Apr. 18-21, 2007). Bonev, Ilian. 2007. « Les robots parallèles : de la recherche vers les applications ». Communication lors de la conférence : Journées Nationales de la Recherche en Robotique (Obernai, France, 9-12 oct. 2007). Giard, Pascal, Boland, Jean-François and Belzile, Jean. 2007. « Hardware-in-the-loop functional verification methodology ». Communication lors de la conférence : OMG’s Third Software-Based Communication Workshop : Realizing the Vision (Fairfax, VA, USA, Mar. 5-8, 2007). Boisclair, D., Parent, S. and Petit, Yvan. 2007. « Étude biomécanique de la fixation d’une vertèbre par vis pédiculaire en fonction de la qualité osseuse ». Communication lors de la conférence : 37e Réunion Annuelle de la Société de la Scoliose du Québec (Montréal, QC, Canada, 11-13 oct. 2007). Barka, N., Khelalfa, A., Bocher, Philippe, Brousseau, J. and Sundararajan, S.. 2007. « Analysis of the effect of frequency using numerical modeling of induction hardening process ». Communication lors de la conférence : 1st International Conference of Sustainable Manufacturing (Montreal, QC, Canada, Oct. 18-19, 2007). Ayari, H., Thomas, Marc and Doré, Sylvie. 2007. « Un modèle statistique pour prédire l’influence de la posture, du poids, de l’ossature et de la densité osseuse sur la réponse dynamique d’un chauffeur exposé aux vibrations globales du corps ». Communication lors de la conférence : Séminaire Santé et Sécurité au Travail (SST) (Montréal, QC, Canada, Jan. 2007). Ata, R., Soulaïmani, Azzeddine and Chinesta, F.. 2007. « The natural element method (NEM) in langrangian collocation formulation for the simulation shallow water flows ». Communication lors de la conférence : Workshop Math ESTIA sur les Mesfree Method (Biarritz, France, Apr. 25-27, 2007). Ata, R., Soulaïmani, Azzeddine and Chinesta, F.. 2007. « The natural element method (NEM) and its application in solid and fluids mechanics ». Communication lors de la conférence : Symposium National de Mathématiques Appliquées et Industrielles (SMAI) (Praz-sur-Arly, France, June 4-8, 2007). April, Alain. 2007. « Introduction au modèle CMMi pour les services ». Communication lors de la conférence : It Service Management Forum (ItSMF) (Montréal, QC, Canada, 27 mars 2007). April, Alain. 2007. « L'importance de la méthode OSSAD pour documenter les processus d'affaire ». Communication lors de la conférence : Conférence du IIBA (International Institute of Business Analysis) (FL, États-Unis, 1 mai 2007). Abran, Alain, Ruiz-Bertol, Fran J. and Dolado, Javier. 2007. « Ontology development for software engineering knowledge management ». Communication lors de la conférence : International Conference on Engineering Education (ICEE) (Coimbra, Portugal, Sept. 2-7, 2007). Abran, Alain, Meridji, K. and Dolado, J.. 2007. « Software engineering from an engineering perspective : SWEBOK as a study object ». Communication lors de la conférence : Apoyo a la Decision en Ingenieria del Software - ADIS Workshop, Congresso Espanol de Informatica - CEDI Conference (Zaragoza, Spain, Sept. 11-14, 2007). Abran, Alain. 2007. « Software cost estimation models : can you trust them? ». Communication lors de la conférence : Universidad Politecnica de Madrid (Madrid, Spain, Nov. 29-Oct. 29, 2007). Abran, Alain. 2007. « Software measurement : arts or sciences ». Communication lors de la conférence : Universidad Politecnica de Valencia (Valencia, Espagne, Oct. 30, 2007). Hager, Lee D. and Voix, Jérémie. 2007. « Criteria for individual hearing protector fit testing protocol ». Communication lors de la conférence : 32nd Annual Conference of the National Hearing Conservation Association (Savannah, GA, USA, Feb. 15-17, 2007).
Berger, Elliott H., Voix, Jérémie and Kieper, Ron W..
2007.
« Methods of developing and validating a field-mire approach for measuring hearing protector attenuation ».
In 32nd Annual Conference of the National Hearing Conservation Association (Savannah, GA, USA, Feb. 15-17, 2007)
National Hearing Conservation Association.
Nélisse, Hugues, Gaudreau, Marc-André, Voix, Jérémie and Laville, Frédéric.
2007.
« A preliminary study on the measurement of effective hearing protection device attenuation during a workshift ».
In Noise At Work 2007 : First European Forum on Efficient Solutions for Managing Occupational Noise Risks (Lille, France, July 3-5, 2007)
pp. 1295-1301.
Nélisse, Hugues, Gaudreau, Marc-André, Voix, Jérémie, Laville, Frédéric and Hager, Lee D..
2007.
« Individual field fit testing of hearing protection devices ».
In Noise At Work 2007 : First European Forum on Efficient Solutions for Managing Occupational Noise Risks (Lille, France, July 3-5, 2007)
pp. 1231-1240.
Forgues, Daniel, Koskela, Lauri and Lejeune, Albert.
2007.
« Toward a client-driven requirement management framework for achieving best value for money ».
In CME 2007 Conference - Construction Management and Economics: 'Past, Present and Future' (Reading, United Kingdom, July 16-18, 2007)
pp. 373-383.
Abingdon, Oxfordshire, United Kingdom : Taylor and Francis Ltd..
Sarker, Jahangir H., Zhang, Jinfang and Dziong, Zbigniew.
2007.
« Low power consuming algorithms for random multiple access ».
In WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc. (Orlando, FL, United states, July 8-11, 2007)
pp. 29-33.
International Social Science Council.
Wong, Tony and Cormier, Gilles.
2007.
« Bond graph causality assignment and evolutionary multi-objective optimization ».
In Advances and Innovations in Systems, Computing Sciences and Software Engineering, Dec. 4-14, 2006)
pp. 433-438.
Springer Netherlands.
Champagne, Roger, Fuhrman, Christopher and Lefebvre, Éric.
2007.
« Modélisation des connaissances d'un baccalauréat en génie logiciel ».
In 24e Congrès de l'Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007)
pp. 984-986.
Association Internationale de Pédagogie Universitaire (AIPU).
Morency, François and Dufresne, Louis.
2007.
« Développement d'un gabarit pour la rédaction d'études de cas en génie mécanique ».
In 24e Congrès de l'Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007)
pp. 906-908.
Association Internationale de Pédagogie Universitaire (AIPU).
Nadeau, Sylvie, Hallé, Stéphane, Déry, S., Doucet, P., Gilbert, R., Gratton, L., Ngô, Anh Dung, Arteau, Jean, Bouzid, Hakim, Brousseau, J., Dessureault, J., Gauthier, F., Laville, Frédéric, Le-Huy, P., Marchand, Françoise, Petit, Yvan, Rodier, D. and Thomas, Marc.
2007.
« Vers l'intégration de connaissances en santé et sécurité du travail en formation universitaire (génie mécanique) - une collaboration unique ».
In 24e Congrès de l’Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007)
pp. 96-100.
Association Internationale de Pédagogie Universitaire (AIPU).
Ayari, H., Thomas, Marc and Doré, Sylvie.
2007.
« Development of an Injury Risk Factor for Drivers ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007)
pp. 137-150.
Montréal : École de technologie supérieure.
Badri, B., Thomas, Marc, Archambault, R., Sassi, S., Lakis, A. and Mureithi, N..
2007.
« A new method to detect synchronous and asynchronous shock data in a signal ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007)
pp. 625-636.
Montréal : École de technologie supérieure.
Chafi, F.Z. and Hallé, Stéphane.
2007.
« Modélisation de la dispersion d'un contaminant gazeux sous différentes stratégies de ventilation ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007)
pp. 454-467.
Montréal : École de technologie supérieure.
Komgon, N.C., Mureithi, N., Lakis, A. and Thomas, Marc.
2007.
« On the use of time synchronous averaging, independent component analysis and support vector machines for bearing fault diagnosis ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007)
pp. 610-624.
Montréal : École de technologie supérieure.
Tran, N.D.P., Ngô, Anh Dung, Lamarche, Louis and Le-Huy, Phieu.
2007.
« Development of a flexible protective system for press-brake using vision part II : investigation on the practicability ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007)
pp. 396-401.
Montréal : École de technologie supérieure.
Venditti, A. and Ngô, Anh Dung.
2007.
« Feasibility study of a light curtain as a protective device on a press-brake ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007)
pp. 506-520.
Montréal : École de technologie supérieure.
Vu, V.H., Thomas, Marc, Lakis, A.A. and Marcouiller, L..
2007.
« A time domain method for modal identification of vibratory signal ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007)
pp. 202-218.
Montréal : École de technologie supérieure.
Cherif, A. R., Hina, M. D., Tadj, Chakib and Levy, N..
2007.
« Quality attribute-driven software architecture of a pervasive multimodal computing system ».
In 20th International Conference on Computer and Their Applications in Industry and Engineering (CAINE) (San Francisco, CA, USA, Nov. 7-9, 2007)
pp. 63-68.
Honolulu, HI, USA : International Society for Computers and their Applications (ISCA).
Dehak, Najim, Kenny, Patrick and Dumouchel, Pierre.
2007.
« Continuous prosodic features and formant modeling with joint factor analysis for speaker verification ».
In 8th Annual Conference of the International Speech Communication Association (Interspeech) (Antwerp, Belgium, Aug. 27-31, 2007)
pp. 853-856.
Bonn, Germany : International Speech Communication Association.
Germain, Lionel, Vo, Phuong, Gey, Nathalie, Jahazi, Mohammad, Humbert, Michel and Bocher, Philippe.
2007.
« Development of sharp local α microtextures during α/β thermo-mechanical processing of TIMETAL 834 ».
In 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007)
pp. 925-928.
Warrendale, USA : Minerals, Metals and Materials Society.
Uta, E., Humbert, M., Gey, N., Hazotte, A., Bocher, Philippe and Jahazi, M..
2007.
« Description and characterisation of texture heterogeneitites in titanium alloy Timetal 834 with a bimodal microstructure ».
In 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007)
pp. 259-262.
Warrendale, USA : Minerals, Metals and Materials Society.
Sauriol, B. and Landry, René Jr.
2007.
« FPGA-based architecture for high throughput, flexible and compact real-time GNSS software defined receiver ».
In National Technical Meeting of the Institute of Navigation (NTM) (San Diego, CA, USA, Jan. 22-24, 2007)
708 -717.
Washington, DC, USA : The Institute of Navigation.
Khelifi, A. and Abran, Alain.
2007.
« Design steps for development software measurement standards etalons for ISO 19761 (COSMIC - FFP) ».
In Proceeding of the 11th WSEAS international conference on computers: computer science and technology (Agios Nicolaos, Greece, July 26-28, 2007)
Coll. « Electrical and Computer Engineering Series »
pp. 590-598.
Stevens Point, USA : World Scientific and Engineering Academy and Society (WSEAS).
Fourati, Salma, Chelbi, Anis and Gharbi, Ali.
2007.
« Système de e-maintenance pour l'aide au diagnostic à distance des pannes ».
In 12th International Conference of the Association Information and Management (AIM 2007) (Lausanne, Suisse, 18-19 juin 2007)
France : Association Information and Management (AIM).
Bitsuamlak, G. T., Bédard, Claude and Stathopoulos, T..
2007.
« Numerical evaluation of wind flow over complex terrain using an object-oriented approach ».
In 33rd Annual Conference of the Canadian Society for Civil Engineering 2005: Gateway To Excellence (Toronto, ON, Canada, June 2-4, 2005)
pp. 2760-2769.
Curran Associates, Inc..
Ramachandran, Venkat, Gargour, Christian S. and Ramachandran, Ravi P..
2007.
« Two-dimensional digital filters with variable magnitude characteristics obtained from a 1-D monotonic response ».
Journal of Computers, vol. 2, nº 7.
pp. 32-39.
Ben Salah, M. and Chatelain, Jean-François.
2007.
« Part localization algorithm based on constrained alignment of surface patches ».
In Proceedings - 13th ISSAT International Conference on Reliability and Quality in Design (Seattle, WA, USA, Aug. 2-4, 2007)
pp. 270-275.
Piscataway, N. J., USA : International Society of Science and Applied Technologies.
Bennis, Saad.
2007.
« Hydraulique et hydrologie ».
2e éd. rev. et augm. .
Montréal ; Québec : École de technologie supérieure ; Presses de l'Université du Québec. 451 p.
Zhang, Jinfang, Dziong, Zbigniew, Gagnon, François and Kadoch, Michel.
2007.
« Enhanced broadcasting and code assignment in mobile Ad Hoc networks ».
In WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc. (Orlando, FL, USA, July 8-11, 2007)
pp. 34-39.
Paris, France : International Social Science Council.
Kouraogo, Justin P., Gagnon, François and Dziong, Zbigniew.
2007.
« A conceptual framework for MAC and physical layers cooperation in ad hoc networks with multiple receptions nodes ».
In WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc. (Orlando, FL, USA, July 8-11, 2007)
pp. 18-23.
Paris, France : International Social Science Council.
El-Bazzal, Zouhair, Kadoch, Michel, Agba, Basile L., Gagnon, François and Bennani, Maria.
2007.
« Optimizing the performance of the generated clusters in mobile ad hoc networks ».
In WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc. (Orlando, FL, USA, July 8-11, 2007)
pp. 12-17.
Paris, France : International Social Science Council.
Barrette, Mathieu, Wong, Tony and De Kelper, Bruno.
2007.
« Evolutionary algorithms performance evaluation using rank-based multiple comparison procedure ».
In WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc. (Orlando, FL, USA, July 8-11, 2007)
pp. 35-40.
Paris, France : International Social Science Council.
Agba, Basile L., Gagnon, François and Kouki, Ammar B..
2007.
« Analysis of second order statistics and system performances in mobile ad hoc networks: theory and simulation ».
In WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc. (Orlando, FL, USA, July 8-11, 2007)
pp. 1-6.
Paris, France : International Social Science Council. Turcot, K., Boivin, K., Aissaoui, Rachid, Hagemeister, Nicola, Pelletier, M. and de Guise, Jacques A.. 2007. « Fidélité et changement clinique minimal des accélérations 3D lors d'une évaluation locomotrice de patients gonarthrosiques ». Affiche numéro 52 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007). Tanguay, F., Mac-Thiong, JM., de Guise, Jacques A. and Hubert, L.. 2007. « Relation entre la géométrie pelvienne et la lordose lombaire suite à la correction chirurgicale d'une scoliose idiopathique ». Affiche numéro 56 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007). Phan Nhut Tran, P., Labelle, H., de Guise, Jacques A. and Aubin, CÉ. 2007. « Élaboration d'outils basés sur des méthodes d'intelligence artificielle pour optimiser les stratégies opératoires d'instrumentation du rachis scoliotique ». Affiche numéro 44 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007). Mezghani, N., Boivin, K., Turcot, K., Aissaoui, Rachid, Hagemeister, Nicola and de Guise, Jacques A.. 2007. « Analyse et classification automatique de données cinétiques provenant de sujets asymptomatiques et gonarthrosiques ». Affiche numéro 60 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, Avril 2007). Mezghani, N., Aissaoui, Rachid, Boivin, K., de Guise, Jacques A., Hagemeister, Nicola and Turcot, K.. 2007. « Analyse et classification automatique de données cinétiques provenant de sujets asymptomatiques et arthrosiques ». Affiche numéro 103 présentée lors de la conférence : 62nd Canadian Orthopaedic Association Annual Meeting : Joints & Arthritis (Halifax, NS, Canada, 1-3 juin 2007). Glavas, P., Mac-Thiong, J.M., Parent, S., de Guise, Jacques A. and Labelle, H.. 2007. « Quel paramètre est à utiliser dans la esure de la cyphose lombo-sacrée dans le spondylolisthésis ». Affiche numéro 62 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007). Fuentes, A., Hagemeister, Nicola, Südhoff, I., Requiao, L., Fernandes, J., Ranger, P. and de Guise, Jacques A.. 2007. « Effets d'une rupture du ligament croisé antérieur sur la biomécanique 3D du genou: résultats préliminaires ». Affiche numéro 50 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).
Zsombor-Murray, P., Bonev, Ilian and El Fashny, S..
2007.
« Displacement ».
In Proceedings : Obergurgl, Austria, February 21 - 26, 2006 (Obergurgul, Autriche, Feb. 21-26, 2006)
Obergurgl.
Birla, L., Botez, Ruxandra, Popov, A. and Coutu, D..
2007.
« Validation of laminar to turbulent transition on a wing airfoil ».
In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007)
Canadian Aeronautics and Space Institute.
Botez, Ruxandra, Molaret, P. and Laurendeau, E..
2007.
« Laminar flow control on a research wing - project presentation on a three years period ».
In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007)
Canadian Aeronautics and Space Institute.
Botez, Ruxandra and Rotaru, M..
2007.
« Relationships between flying qualities and flight test parameters for the F/A-18 Aircraft ».
In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007)
Canadian Aeronautics and Space Institute.
Labib, M., Botez, Ruxandra and Popov, A..
2007.
« Determination of the transition point on the upper surface of a wing airfoil ».
In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007)
Canadian Aeronautics and Space Institute.
Nadeau Beaulieu, M., De Jesus Mota, M. and Botez, Ruxandra.
2007.
« F/A-18 active aeroelastic wing aircraft model identification from flight flutter test data ».
In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007)
Canadian Aeronautics and Space Institute.
Coutu, D, Brailovski, Vladimir, Terriault, Patrick and Fisher, C.
2007.
« Experimental validation of the 3D numerical model for an adaptative laminar wing with flexible extrados ».
In 18th International Conference on Adaptive Structures and Technologies : ICAST 2007 ; October 3 - 5, 2007, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Oct. 3-5, 2007)
pp. 260-269.
Redhook, NY, USA : Curran.
Goutaland, D., Winiarski, T., Dubé, Jean-Sébastien, Bièvre, G., Chouteau, M. and Buoncristiani, J.-F..
2007.
« On the use of geophysical methods to characterize heterogeneities of quaternary gravely sediments. Application for stormwater infiltration ».
In 6th International Conference on Sustainable Techniques and Strategies for Urban Water Management (NOVATECH) (Lyon, France, June 25-28, 2007)
pp. 851-858.
Lyon, France : GRAIE.
Nadeau, Sylvie, Bouzid, Hakim and Prud'Homme, D..
2007.
« Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007)
Montréal : École de technologie supérieure.
Tremblay, Guy, Larivière, C., Nadeau, Sylvie, Harrabi, Lofti, Dolez, Patricia, Vu-Khanh, Toan and Lara, J..
2007.
« Caractérisation de la souplesse des gants de protection par une méthode biomécanique basée sur l’électromyographie de surface : étude de validation ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007)
Montréal : École de technologie supérieure.
Khettabi, R., Songmene, Victor and Masounave, Jacques.
2007.
« Modeling of fine dust during machining ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007)
Montréal : École de technologie supérieure.
Ayari, Houcine, Thomas, Marc and Doré, Sylvie.
2007.
« A design of experiment for studying the effect of human body parameters on an injury risk of drivers exposed to vibration ».
In 37th International Conference on Computers and Industrial Engineering (CIE) (Alexandria, Egypt, Oct. 20-23, 2007)
pp. 2106-2114.
Computers & Industrial Engineering.
Kaddoum, Georges, Fournier-Prunaret, D., Chargé, P. and Roviras, D..
2007.
« Chaos synchronization between Lorenz systems using two numerical integration methods ».
In IEEE International Workshop on Nonlinear Dynamics of Electronic Systems (NDES) (Tokushima, Japan, July 23-26, 2007)
pp. 91-94.
Kaddoum, Georges, Chargé, P., Roviras, D. and Fournier-Prunaret, D..
2007.
« Improvement of synchronization performance for multi-user chaos-based DS-CDMA system ».
In International workshop on nonlinear maps and their applications (NOMA'07) (Toulouse, France, Dec. 13-14, 2007)
pp. 34-37.
Piscataway, NJ, USA : IEEE.
Kaddoum, Georges, Chargé, P., Roviras, D. and Fournier-Prunaret, D..
2007.
« Comparison of chaotic sequences in a chaos based DS-CDMA system ».
In Proceedings of the 2007 International Symposium on Nonlinear Theory and its Applications (NOLTA'07) (Vancouver, BC, Canada, Sept. 16-19, 2007)
pp. 212-215.
Japan : Institute of Electronics, Information and Communication Engineers.
Le Cocq, Cécile, Laville, Frédéric and Gargour, Christian.
2007.
« La communication dans le bruit : un conflit entre santé et sécurité ».
In Sécurité des travailleurs et contrôle des risques industriels (Montréal, QC, Canada, 28 juin 2007)
Montréal, QC, Canada : ÉTS.
Ramachandran, Venkat, Gargour, Christian and Ramachandran, Ravi P..
2007.
« Generation of transfer functions yielding monotonic frequency responses by the integration of Butterworth polynomials ».
In IEEE Northeast Workshop on Circuits and Systems, 2007. NEWCAS 2007 (Montreal, QC, Canada, Aug. 5-8, 2007)
pp. 1181-1184.
Piscataway, NJ, USA : IEEE.
LeCocq, Cécile, Laville, Frédéric and Gargour, Christian.
2007.
« Protéger l'audition tout en permettant la communication ».
In Premier Congrès international sur l'ingénierie des risques industriels : CIRI 2007 : Montréal (Québec) Canada, 17-18 et 19 décembre 2007 : actes (Montréal, QC, Canada, 17-19 déc. 2007)
Montréal, QC, Canada : Université du Québec, École de technologie supérieure.
Ramachandran, V., Gargour, Christian and Ramachandran, R. P..
2007.
« A family of low-pass filters having pseudo-monotonic magnitude response approximating linear phase ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, QC, Canada, June 11-13, 2007)
Montreal, QC, Canada : Université du Québec, École de technologie supérieure.
Ngô, Anh Dung, Hallé, Stéphane, Nadeau, Sylvie, Déry, P., Doucet, P. , Gilbert, R. , Gratton, L., Arteau, Jean, Bouzid, Hakim, Brousseau, J. , Dessureault, P. , Gauthier, F. , Laville, Frédéric, Le Huy, P. , Marchand, Françoise , Petit, Yvan , Rodier, D. and Thomas, Marc.
2007.
« Le défi de l'intégration des connaissances en santé et en sécurité du travail - génie mécanique ».
Travail et Santé, vol. 23, nº 4.
pp. 36-39. Nadeau, Sylvie. 2007. « Gestion des risques : comment intégrer la gestion des risques de santé et de sécurité du travail aux risques opérationnels ». Communication lors de la conférence : MBA UQAT 2007, Rouyn-Noranda (Rouyn-Noranda, QC, Canada, 19 oct. 2007).
Alexandru, Paul and Nadeau, Sylvie.
2007.
« Considerations of integration of the risks of work using the diagram of flow ».
In 6e Congrès International de Sciences des Matériaux et d’Ingénierie (Iasi, Roumania, May 24-27, 2007)
pp. 35-42.
Desharnais, Jean-Marc, Zarour, Mohammad and April, Alain.
2007.
« Very small enterprise (VSE) quality process assessment ».
In III Taller Internacional de Calidad en Tecnologias de la Informacion y la comunicacion (Havana, Cuba, Feb. 15-16, 2007)
April, Alain and Abran, Alain. 2007. « A model to improve the maturity of software maintenance ». Communication lors de la conférence : Software and Systems Process Improvement Network, SPIN (Montreal, QC, Canada, 2007).
Ratté, Sylvie, Njomgue, W. and Ménard, P. A..
2007.
« Highlighting document’s structure ».
In Fourth International Conference on computer, electrical and systems science and engineering (CESSE) (Venice, Italy, Nov. 23-25, 2007)
pp. 34-38.
Ratté, Sylvie.
2007.
« Compte-rendu d'expériences simples avec le PC Tablette ».
Revue Internationale des technologies en pédagogie universitaire, vol. 4, nº 1.
pp. 32-37. El Boussaidi, Ghizlane. 2007. « Software design through model transformation ». Communication lors de la conférence : SAP Academic Symposium (Palo Alto, CA, USA, June 7, 2007).
El Boussaidi, Ghizlane and Mili, H..
2007.
« A model-driven framework for representing and applying design patterns ».
In 31st Annual International Computer Software and Applications Conference (COMPSAC) (Beijing, China, July 24-27, 2007)
pp. 97-100.
IEEE.
El Boussaidi, Ghizlane and Mili, H..
2007.
« Une approche à base de règles pour la mise en oeuvre des patrons de conception ».
In ISPS 2007, 8th international symposium on programming and systems (Alger, Algeria, May 7-9, 2007)
pp. 96-107.
Alger, Algeria : Houari Boumedienne University of science and technology.
Li, Di, Landry, René Jr. and Lavoie, Philippe .
2007.
« PC104 based low-cost Inertial/GPS integrated navigation platform: design and experiments ».
Journal of Global Positioning System, vol. 6, nº 1.
pp. 80-88.
Bétrémieux, Arnaud and Landry, René Jr..
2007.
« Le Wi-Fi pour le positionnement et la navigation en intérieur ».
Revue XYZ, nº 111.
pp. 27-30.
Rousse, Daniel R..
2007.
« Numerical predictions of short-pulsed laser transport in absorbing and scattering media. I—A time-based approach with flux limiters ».
International Journal of Computational Fluid Dynamics, vol. 21, nº 7-8.
pp. 247-254.
Rousse, Daniel R..
2007.
« Numerical predictions of short-pulsed laser transport in absorbing and scattering media. II—A frequency-based approach ».
International Journal of Computational Fluid Dynamics, vol. 21, nº 9-10.
pp. 369-375.
Francoeur, Mathieu and Rousse, Daniel R..
2007.
« Short-pulsed laser transport in absorbing and scattering media: time-based versus frequency-based approaches ».
Journal of Physics D: Applied Physics, vol. 40, nº 18.
pp. 5733-5742.
Rousse, Daniel R..
2007.
« A brief review of the history of radiative transfer ».
In Proceedings of the Third International Conference on Thermal Engineering: Theory and Applications (Amman, Jordan, May 21-23, 2007)
Francoeur, M. and Rousse, Daniel R..
2007.
« Unsteady radiative transfer in participating media: a frequency-based numerical approach ».
In Special Issue, 3rd International Conference on Thermal Engineering: Theory and Applications (Amman, Jordan, May 21-23, 2007)
Coll. « Energy conversion and management », vol. 49.
Amsterdam, The Netherlands : Elsevier. Beauregard, Yvan, Zielinski, R. and Thomson, V.. 2007. « Lean strategy to win: evaluating alternatives in fuzzy front end product development ». Communication lors de la conférence : 2007 AERO Conference, Canadian Aeronautics and Space Institute (CASI) (Toronto, ON, Canada, Apr. 25-26, 2007).
Ince, S., Konrad, J. and Vázquez, Carlos.
2007.
« Spline-based intermediate view reconstruction ».
In Stereoscopic Displays and Virtual Reality Systems XIV (San Jose, CA, USA, Jan. 29-31, 2007)
Coll. « Proceedings of SPIE », vol. 6490.
Bellingham, WA, USA : SPIE.
Tam, Wa James, Vázquez, Carlos and Speranza, Filippo.
2007.
« Surrogate depth maps for stereoscopic imaging: different edge types ».
In Stereoscopic Displays and Virtual Reality Systems XIV (San Jose, CA, USA, Jan. 29-31, 2007)
Coll. « Proceedings of SPIE », vol. 6490.
0C1-0C9.
Bellingham, WA, USA : SPIE.
Vázquez, Carlos.
2007.
« View generation for 3D-TV using image reconstruction from irregularly spaced samples ».
In Stereoscopic Displays and Virtual Reality Systems XIV (San Jose, CA, USA, Jan. 29-31, 2007)
Coll. « Proceedings of SPIE », vol. 6490.
0E1-0E12.
Bellingham, WA, USA : SPIE.
Vázquez, Carlos, Ghazal, Mohammed and Amer, Aishy.
2007.
« Occlusion and split detection and correction for object tracking in surveillance applications ».
In Visual Communications and Image Processing 2007 (San Jose, CA, USA , Jan. 30-Feb. 1, 2007)
Coll. « Proceedings of SPIE », vol. 6508.
2F1-2F12.
Bellingham, WA, USA : SPIE.
Beauregard, Y., Thomson, V. and Bhuiyan, N..
2007.
« Lean engineering in product development ».
In Proceedings of the 2007 AERO Conference, Canadian Aeronautics and Space Institute (CASI) (Toronto, ON, Canada, Apr. 25-26, 2007)
Kanata, ON, Canada : Canadian Aeronautics and Space Institute.
Ghazal, M., Vázquez, Carlos and Amer, A..
2007.
« Real-time automatic detection of vandalism behavior in video sequences ».
In ISIC 2007 IEEE International Conference on Systems, Man and Cybernetics (Montreal, QC, Canada, Oct. 7-10, 2007)
pp. 1056-1060.
Piscataway, NJ, USA : IEEE.
Hallé, Stéphane.
2007.
« L’enseignement du génie appliqué par la méthode des cas ».
In Actes du 4e Colloque – Questions de pédagogie dans l’enseignement supérieure : les pédagogies actives : enjeux et conditions. volume 1 et 2 (Louvain-La-Neuve, Belgique, 24-26 janv. 2007)
pp. 735-741.
Louvain-La-Neuve, Belgique : Presses universitaires de Louvain.
Hachelef, N., Lavoie, Philippe, Li, D. and Landry, René Jr..
2007.
« Experiments of low-cost INS/GPS navigation platform based on PC104 ».
In Proceedings of the 20th International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GNSS 2007) (Fort Worth, TX, USA, Sept. 25-28, 2007)
pp. 1669-1676.
Manassas, VA, USA : The Institute of Navigation.
Li, Di and Landry, René Jr..
2007.
« MEMS IMU based INS/GNSS integration design strategies and system performance evaluation ».
In Navigation Conference and Exhibition (NAV 07) (London, UK, Oct. 30-Nov. 1, 2007)
pp. 610-643.
London, UK : Curran Associates, Inc..
Li, Di, Landry, René Jr. and Lavoie, Philippe .
2007.
« Validation and performance evaluation of two different inertial navigation system design approaches ».
In IGNSS Symposium 2007 (Sydney, Australia, Dec. 4-6, 2007)
International Global Navigation Satellite Systems Society.
Sahmoudi, M., Landry, René Jr., Ilie, I. and Delaporte, T..
2007.
« Satellite augmentation systems for acceleration determination in airborne gravimetry: a comparative study ».
In Proceedings of the 20th International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GNSS 2007) (Fort Worth, TX, USA, Sept. 25-28, 2007)
pp. 1669-1676.
Manassas, VA, USA : The Institute of Navigation.
Chafi, Fatima Zohra and Hallé, Stéphane.
2007.
« Évaluation du confort thermique dans une chambre climatique par une approche Navier-Stokes et Euler : validation expérimentale ».
In VIIIe colloque interuniversitaire franco-québécois : thermique des systèmes : actes : Montréal mai 2007 (Montréal, QC, Canada, 28-30 mai 2007)
pp. 341-346.
Montréal; Varennes, Québec : École de technologie supérieure ; Ressources naturelles du Canada .
Ung, Bora and Sheng, Yunlong.
2007.
« Interference of surface waves in a metallic nanoslit ».
Optics Express, vol. 15, nº 3.
pp. 1182-1190.
Ung, Bora and Sheng, Yunlong.
2007.
« Mechanism of coupling and interference in nano-slit ».
In Holography and Diffractive Optics III (Beijing, China, Nov. 12-14, 2007)
Coll. « Proceedings of SPIE », vol. 6832.
SPIE - The International Society for Optical Engineering. Ung, B. and Yunlong, Sheng. 2007. « Mechanism of coupling and interference in nano-slit ». Communication lors de la conférence : Holography and Diffractive Optics III (Beijing, China, Nov. 12-14, 2007).
Lapalme, J., Aboulhamid, E. M., Nicolescu, G. and Rousseau, F..
2007.
« Separating modeling and simulation aspects in hardware/software framework-based modeling languages ».
[Conference paper]. Arabian Journal for Science and Engineering, vol. 32, nº 2C.
pp. 41-60.
Bouzid, Abdel-Hakim and Martin, John, éds.
2007.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Doutres, Olivier, Dauchez, Nicolas and Génevaux, Jean-Michel.
2007.
« Porous layer impedance applied to a moving wall: Application to the radiation of a covered piston ».
Journal of the Acoustical Society of America, vol. 121, nº 1.
pp. 206-213.
Doutres, Olivier, Dauchez, Nicolas, Génevaux, Jean-Michel and Dazel, Olivier.
2007.
« Validity of the limp model for porous materials: A criterion based on the Biot theory ».
Journal of the Acoustical Society of America, vol. 122, nº 4.
pp. 2038-2048.
Ouellet-Plamondon, Claudiane.
2007.
« Adaptation in agriculture for global climate management ».
In 2007 ASABE Annual International Meeting (Minneapolis, MN, USA, June 17-20, 2007)
Minneapolis, MN, USA : American Society of Agricultural and Biological Engineers.
Ouellet-Plamondon, Claudiane.
2007.
« Biocapacity and ecological footprint in Japan ».
In Joint Conference on Environmental Engineering in Agriculture 2007 (Fuchu, Japan, Sept. 11-14, 2007)
Msaaf, Omar, Maranzana, Roland and Rivest, Louis.
2007.
« Part data mining for information re-use in a PLM context ».
In ASME Turbo Expo 2007: Power for Land, Sea, and Air (Montreal, QC, Canada, May 14-17, 2007)
pp. 187-194.
New York, NY, USA : American Society of Mechanical Engineers.
Blanchard, F., Razzari, L., Sharma, G., Morandotti, R., Keiffer, J. C., Ozaki, T., Reid, M., Tiedje, H. F., Haugen, H. K., Morris, D. and Hegmann, F. A..
2007.
« Generation of high-power terahertz pulses at the advanced laser light source (ALLS) ».
In Conference on Lasers and Electro-Optics, 2007. CLEO 2007 (Baltimore, MD, USA, May 6-11, 2007)
Blanchard, F., Razzari, L., Bandulet, H. C., Sharma, G., Morandotti, R., Kieffer, J. C., Ozaki, T., Reid, M., Tiedje, H. F., Haugen, H. K. and Hegmann, F. A..
2007.
« Generation of 1.5 µJ single-cycle terahertz pulses by optical rectification from a large aperture ZnTe crystal ».
Optics Express, vol. 15, nº 20.
pp. 13212-13220.
Blanchard, Francois, Bandulet, Heidi-Christina, Razzari, Luca, Sharma, Gargi, Morandotti, Roberto, Kieffer, Jean-Claude, Ozaki, Tsuneyuki, Reid, Matt, Tiedje, Henry, Haugen, Harold, Morris, Denis and Hegmann, Frank.
2007.
« High-power terahertz pulses at the advanced laser light source (ALLS) laboratory ».
In Optical Terahertz Science and Technology (Orlando, FL, USA, Mar. 18, 2007)
Coll. « OSA Technical Digest Series (CD) »
MES.
Orlando, Florida : Optical Society of America.
Aly, W. H. F., Zhani, M. F. and Elbiaze, H..
2007.
« Using closed loop feedback control theoretic techniques to improve obs networks performance ».
In Fourth International Conference on Broadband Communications, Networks and Systems, 2007. BROADNETS 2007 (Raleigh, NC, USA, Sept. 10-14, 2007)
pp. 46-54.
IEEE.
Sanghapi, J. N. T., Elbiaze, H. and Zhani, M. F..
2007.
« Adaptive burst assembly mechanism for OBS networks using control channel availability ».
In 9th International Conference on Transparent Optical Networks, 2007. ICTON '07 (Roma, Italy, July 1-5, 2007)
pp. 96-100.
IEEE.
Zhani, M. F., Elbiaze, H. and Kamoun, F..
2007.
« α_ SNFAQM: an active queue management mechanism using neurofuzzy prediction ».
In 12th IEEE Symposium on Computers and Communications, 2007. ISCC 2007 (Las Vegas , NV, USA, July 1-4, 2007)
pp. 381-386.
IEEE. Dell, Martin S., Dziong, Zbigniew, Li, Wei, Ouyang, Yu-Kuen, Tota, Matthew and Wang, Yung-Terng (inventeurs) 9 January 2007. « Three-stage switch fabric with input device features ». Agere Systems Inc. (titulaire(s)). Brevet américain US 7,161,906. Coulombe, Stéphane and Grassel, Guido (inventeurs) 1 May 2007. « Method and apparatus for transcoding content with permissible operations autorized by content creator ». Nokia Mobile Phones (titulaire(s)). Brevet américain US 7,213,072. Belzile, Jean, Thibeault, Claude, Gagnon, François and Batani, Naïm K. (inventeurs) 16 October 2007. « Method and apparatus for testing a device in an electronic component ». Socovar S.E.C, Thibeault, Claude, Gagnon, François (titulaire(s)). Brevet américain US 7,284,178. de Guise, Jacques A., Yahia, L'Hocine, Duval, Nicolas, Godbout, Benoît, Koller, Annick, Sati, Marwan, Hagemeister, Nicola, Parent, Gerald and El Maach, Ismail (inventeurs) 6 November 2007. « A system for the analysis of 3D kinematic of the knee ». Socovar, Polyvalor, Val-Chum Limted Partnership, Hagemeister, Nicola (titulaire(s)). Brevet américain US 7,291,119.
Gargouri, Faïez and Benslimane, Djamal and Bourque, Pierre, éds.
2007.
« Les ontologies mythes, réalités et perspectives actes du JFO Journées francophones sur les ontologies 2007, du 18 au 20 octobre, Sousse, Tunisie ».
Tunis : Centre de publication universitaires. Abran, A. and Panteliuc, A.. 2007. « Estimation models based on functional profiles ». Communication lors de la conférence : III Taller internacional de Calidad en technologias de information et de communications (Cuba, Feb. 15-16, 2007). Abran, Alain. 2007. « The emergence of software engineering as a new engineering discipline ». Communication lors de la conférence : PReCISE Day '07 (Namur, Belgium, Dec. 12, 2007). Abran, Alain. 2007. « The emergence of software engineering as a new engineering discipline: how to develop quickly and international consensus on a new body of knowledge- The SWEBOK example ». Communication lors de la conférence : La Catedra Ateneo -Engineering Research Institute of Aragon, Universidad de Zaragosa (Zaragosa, Spain, Oct. 26, 2007).
Abu Talib, Manar, Ormnandjeva, Olga and Abran, Alain.
2007.
« AS-TRM and functional size with COSMIC-FFP ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Vigo, Spain, June 4-7, 2007)
pp. 1938-1944.
Institute of Electrical and Electronics Engineers.
Adane, Y., Constantinescu, A., Belzile, J. and Kouki, A..
2007.
« Design of miniature RF band-pass filters for a hybrid GPS/Galileo receiver front-end insert ».
In Institute of Navigation National Technical Meeting (NTM) (San Diego, CA, USA, Jan. 22-24, 2007)
pp. 350-356.
Afrin, N., Chen, D. L., Cao, X. and Jahazi, M..
2007.
« Influence of friction stir welding on the tensile behaviour of AZ31B magnesium alloy ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
Canadian Institute of Mining, Metallurgy and Petroleum.
Afrin, N., Chen, D. L., Cao, X. and Jahazi, M..
2007.
« Strain hardening behavior of a friction stir welded magnesium alloy ».
Scripta Materialia, vol. 57, nº 11.
pp. 1004-1007.
Anton, Nicoleta, Popescu, Dumitru and Botez, Ruxandra Mihaela.
2007.
« Estimation of stability derivatives from aircraft geometrical data for use in simulator applications ».
In 31st Congress of the American Romanian Academy of Arts and Sciences (ARA) (Brasov, Romania, July 31-Aug. 5, 2007)
Arteau, Jean. 2007. « Prévenir les chutes de hauteur dès la conception : faisabilité technique, organisation du travail, ergonomie et coûts ». Communication lors de la conférence : Conférence scientifique de l'ÉREST (Montréal, QC, Canada, 15 fév. 2007). Arteau, Jean. 2007. « Prévenir les chutes de hauteur dès la conception : faisabilité technique. organisation du travail, ergonomie, coûts et conditions préalables ». Communication lors de la conférence : Assemblée générale annuelle de l'ASP Construction (Montréal, QC, Canada, 4 mai 2007).
Arteau, Jean, Beauchamp, Yves, Labranche, Laetitia, Petit, Yvan, Lajoie, Olivier, Dubuc-Quevillon, Mariko and Venne, Pascal.
2007.
« Choix d'un système d'arrêt de chute et de positionnement pour les poseurs d'acier d'armature (ferrailleurs) ».
IRSST. 77 p.
Assi, R. and McClure, G..
2007.
« A simplified method for seismic analysis of rooftop telecommunication towers ».
In 9th Canadian Conference on Earthquake Engineering (CCEE) (Ottawa, ON, Canada, June 26-29, 2007)
pp. 244-253.
The Canadian Association for Earthquake Engineering.
Assi, R., McClure, G. and Pierre, J.-R..
2007.
« Impact of changes in the NBCC 2005 seismic provisions on the design of restraints for OFCs and essential rigid components ».
In 9th Canadian Conference on Earthquake Engineering (CCEE) (Ottawa, ON, Canada, June 26-29, 2007)
pp. 254-261.
The Canadian Association for Earthquake Engineering.
Assi, Rola and McClure, Ghyslaine.
2007.
« A simplified method for seismic analysis of rooftop telecommunication towers ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 34, nº 10.
pp. 1352-1363.
Ata, R., Soulaïmani, Azzeddine and Chinesta, F..
2007.
« The natural element method (NEM) and its applications in solid and fluid mechanics ».
In Congrès National de Mathématiques Appliquées et Industrielles (SMAI) (Praz-sur-Arly, France, June 4-8, 2007)
Paris, France : Société de Mathématiques Appliquées et Industrielles (SMAI).
Ata, R., Soulaïmani, Azzeddine and Chinesta, F..
2007.
« The natural element method (NEM) in a langrangian collocation formulation for the simulation shallow water flows ».
In International Workshop Math ESTIA Meshfree Method (Biarritz, France, Apr. 25-27, 2007)
Ateme-Nguema, Barthélemy and Dao, Thien-My.
2007.
« Optimal selection of manufacturing routing of parts: a case study ».
In International Conference on Industry, Engineering and Management Systems (IEMS) (Cocoa Beach, FL, USA, Mar. 12-14, 2007)
pp. 708-713.
Ateme-Nguema, H. and Dao, Thien-My.
2007.
« Quantized hopfield networks and tabu search for manufacturing cell formation problems, applications of metaheuristics ».
In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Badri, B., Thomas, Marc, Archambault, R., Sassi, S. and Lakis, A..
2007.
« A new method for shock detection and time-domain classification ».
In Congress theme: machinery & process health monitoring - future trends and prospects : proceedings of the 20th International Congress on Condition Monitoring and Diagnostic Engineering Management ; Faro, Portugal, June 13 - 15, 2007 ; COMADEM 2007 (Faro, Portugal, June 13-15, 2007)
pp. 667-676.
Coimbra Inst. de Telecomunicações.
Badri, B., Thomas, Marc, Archambault, R., Sassi, S., Lakis, A. and Mureithi, N..
2007.
« The shock extractor ».
In 25th Seminar on Machinery Vibration (Saint John, NL, Canada, Oct. 24-26, 2007)
Calgary, Canada : CMVA.
Badri, B, Thomas, Marc, Sassi, S. and Lakis, A..
2007.
« Combination of bearing defect simulator and artifical neurl network of the diagnosis of damaged bearings ».
In Congress theme: machinery & process health monitoring - future trends and prospects : proceedings of the 20th International Congress on Condition Monitoring and Diagnostic Engineering Management ; Faro, Portugal, June 13 - 15, 2007 ; COMADEM 2007 (Faro, Portugal, June 13-15, 2007)
pp. 175-185.
Coimbra Inst. de Telecomunicações.
Baptiste, P., Penz, B. and Larbi, R..
2007.
« Polynomial time solution methods for some crossdocking problems ».
In International conference on Industrial Engineering and Systems Management, IESM (Beijing, China, May 30-June 02, 2007)
Beijing : Tsinghua University Press.
Baraër, Michel and Madramootoo, Chandra A..
2007.
« Can frost damage impact water demand for crop production in the future? ».
In Role of irrigation and drainage in a sustainable future: USCID Fourth International Conference on Irrigation and Drainage (Sacramento, CA, USA, Oct. 03-06, 2007)
pp. 1217-1232.
U.S. Committee on Irrigation and Drainage.
Barrette, Mathieu, De Kelper, Bruno and Wong, Tony.
2007.
« Statistical comparison of evolutionary algorithms ».
In Smart systems engineering : computational intelligence in architecting complex engineering systems : proceedings of the Artificial Neural Networks in Engineering (ANNIE ...) Conference (St-Louis, MO, USA, Nov. 11-14, 2007)
Coll. « ASME Press Series on Intelligent Engineering Systems Through Artificial Neural Networks », vol. 17.
pp. 237-245.
ASME Press.
Ben Ayed, Ismail and Mitiche, Amar.
2007.
« Embedding a region merging prior in level set vector-valued image segmentation ».
In Computer Vision – ACCV 2007. 8th Asian Conference on Computer Vision, Tokyo, Japan, November 18-22, 2007, Proceedings, Part I (Tokyo, Japan, Nov. 18-22, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4843.
pp. 925-934.
Springer Berlin Heidelberg.
Bensoussan, David and Hammami, M..
2007.
« On the robustness of state space models ».
In Fourth International Multi-Conference on Systems, Signals & Devices (Hammamet, Tunisia, Mar. 19-22, 2007)
Bensoussan, David and Hammami, Maher.
2007.
« Achieving robustness to plant uncertainty using high gain feedback ».
In Fourth International Multi-Conference on Systems, Signals & Devices (Hammamet, Tunisia, Mar. 19-22, 2007)
IEEE.
Bensoussan, David and Kelemen, Mattei.
2007.
« Application of quasi-linear feedback to the control of a hard disk drive servo system with nonlinearities ».
In 5e Conférence internationale sur l'automatisation industrielle = 5th International Conference on Industrial Automation (Montréal, QC, Canada, June 11-13, 2007)
Montréal : Association Internationale de l'Automatisation Industrielle.
Berthaut, F., Pellerin, R. and Gharbi, Ali.
2007.
« Contrôle de systèmes hybrides de réfection et de réparation avec disponibilité probabiliste des pièces de rechange ».
In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)
Bigras, P., Lambert, M. and Perron, C..
2007.
« New formulation for an industrial robot force controller: Real-time implementation on a KUKA robot ».
In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Montréal, QC, Canada, Oct. 07-10, 2007)
pp. 2794-2799.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Biskri, D. E. and Botez, Ruxandra.
2007.
« Method for aerodynamic forces optimizations based on an analytical error formulation ».
In Proceedings - 7th World Congress of Structural and Multidisciplinary Optimization : May 21 - 25, 2007, Seoul, Korea (Seoul, South Korea, May 21-25, 2007)
Blanchette, Handy Fortin and Al-Haddad, Kamal.
2007.
« The impact of power converter technologies on stand alone wind turbine applications ».
In 2007 IEEE Canada Electrical Power Conference (Montréal, QC, Canada, Oct. 25-26, 2007)
pp. 68-73.
IEEE.
Blaquière, Yves, Savaria, Yvon and Fouladi, Jaouad El.
2007.
« Digital measurement technique for capacitance variation detection on integrated circuit I/Os ».
In 14th IEEE International Conference on Electronics, Circuits and Systems (ICECS) (Marrakech, Morocco, Dec. 11-14, 2007)
pp. 42-45.
IEEE.
Blinova, Alexandra, Amelin, Yuri and Samson, Claire.
2007.
« Constraints on the cooling history of the H-chondrite parent body from phosphate and chondrule Pb-isotopic dates from Estacado ».
Meteoritics and Planetary Science, vol. 42, nº 7-8.
pp. 1337-1350.
Botez, Ruxandra, Fayard, B., Alban, B., Dionne, P., Mamert, A. and Popescu, D..
2007.
« Stability derivatives calculations and integrations on an aircraft flight model ».
In 12th Australian International Aerospace Conference (AIAC) (Melbourne, Australia, Mar. 19-22, 2007)
Bouchriha, Hanen, Ouhimmou, Mustapha and D'Amours, Sophie.
2007.
« Lot sizing problem on a paper machine under a cyclic production approach ».
International Journal of Production Economics, vol. 105, nº 2.
pp. 318-328.
Boudreault, J.-P., Dubé, Jean-Sébastien, Chouteau, M., Gloaguen, E., Winiarski, T. and Hardy, E..
2007.
« Caractérisation de l'hétérogénéité physique d'un remblai urbain contaminé par une approche géophysique croisée ».
In Ottawa 2007, the Diamond Jubilee : 60th Canadian Geotechnical Conference & 8th Joint CGS/IAH-CNC Groundwater Conference : conference proceedings = Ottawa 2007, le Jubilé de diamants : 60e conférence géotechnique canadienne et 8e conférence conjointe SCG/A (Ottawa, ON, Canada, 21-24 oct. 2007)
pp. 312-319.
Canada : Société canadienne de géotechnique.
Bouix, S., Martin-Fernandez, M., Ungar, L., Nakamura, M., Koo, M. S., McCarley, R. W. and Shenton, M. E..
2007.
« On evaluating brain tissue classifiers without a ground truth ».
NeuroImage, vol. 36, nº 4.
pp. 1207-1224.
Boulé, M., Chenard, J. S. and Zilic, Z..
2007.
« Debug enhancements in assertion-checker generation ».
IET Computers and Digital Techniques, vol. 1, nº 6.
pp. 669-677.
Boulé, Marc, Chenard, Jean-Samuel and Zilic, Zeljko.
2007.
« Assertion checkers in verification, silicon debug and in-field diagnosis ».
In 8th International Symposium on Quality Electronic Design (ISQED'07) (San Jose, CA, USA, Mar. 26-28, 2007)
pp. 613-618.
IEEE.
Boulé, Marc and Zilic, Zeljko.
2007.
« Efficient automata-based assertion-checker synthesis of SEREs for hardware emulation ».
In Asia and South Pacific Design Automation Conference (Yokohama, Japan, Jan. 23-26, 2007)
pp. 324-329.
IEEE.
Boulet, J.F., Gharbi, Ali and Kenné, Jean-Pierre.
2007.
« Amélioration d'une politique combinée de maintenance et de contrôle d'inventaire dans un contexte manufacturier ».
In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)
Boulet, J.F., Gharbi, Ali and Kenné, Jean-Pierre.
2007.
« Multiobjective optimization of preventive and corrective maintenance policies in unreliable manufacturing systems ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Bourque, Pierre. 2007. « Estimating effort and cost in software projects - ISBSG a multi-organizational project data repository for project estimation and benchmarking ». Communication lors de la conférence : IEEE Computer Society Distinguished Visitor Program (Buenos Aires, Argentina, May 9-10, 2007). Bourque, Pierre. 2007. « Estimating effort and cost in software projects - ISBSG a multi-organizational project data repository for project estimation and benchmarking ». Communication lors de la conférence : IEEE Computer Society Distinguished Visitor Program (Buenos Aires, Argentina, May 9-10, 2007).
Boutana, N., Bocher, Philippe, Jahazi, M., Piot, D. and Motheillet, F..
2007.
« Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ».
In Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007)
pp. 267-270.
Warrendale, PA, USA : Minerals, Metals and Materials Society.
Bozzi, Maurizio, Xu, Feng, Deslandes, Dominic and Wu, Ke.
2007.
« Modeling and design considerations for substrate integrated waveguide circuits and components ».
In International conference on telecommunications in modern satellite, cable and broadcasting services (TELSIKS ) (Nis, Serbia & Montenegro, Sept. 26-28, 2007)
PVII-PXVI.
IEEE. Camenen, B. and Pham Van Bang, D.. 2007. « On the sedimentation - consolidation models ». Communication lors de la conférence : 9th International Conference on Nearshore Estuarine Cohesive Sediment Transport Processes INTERCOH (Brest, France, Sept. 25-28, 2007).
Cao, X. and Jahazi, M..
2007.
« Applications of laser welding and friction stir welding technologies for joining aerospace magnesium alloys ».
In LMT 2007 : proceedings of the Third International Conference on Light Metals Technology : September 24-26, 2007, Saint-Sauveur, Québec, Canada (Saint-Sauveur, QC, Canada, Sept. 24-26, 2007)
National Research Council Canada = Conseil national de recherches Canada.
Cao, X. and Jahazi, M..
2007.
« Friction stir processing of sand-cast aerospace magnesium alloy Ze41A-T5 ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
pp. 169-182.
Canadian Institute of Mining, Metallurgy and Petroleum.
Cao, X., Jahazi, M., Guerin, M. and Mishra, R. S..
2007.
« Friction stir welding of an aerospace magnesium alloy ».
In Friction Stir Welding and Processing IV (Orlando, FL, USA, Feb. 25-Mar. 1, 2007)
pp. 213-222.
Warrendale, PA : The Minerals, Metals & Materials Society.
Cao, Xinjin and Jahazi, Mohammad.
2007.
« New analyses of pressure filtration curves of Al alloys: a case study ».
In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006)
Coll. « Materials Science Forum », vol. 539-543.
pp. 351-356.
Vancouver, Canada : Trans Tech Publications Ltd.
Carastan, D. J. and Demarquette, N. R..
2007.
« Polystyrene/clay nanocomposites ».
International Materials Reviews, vol. 52, nº 6.
pp. 345-380.
Cardinal, P., Boulianne, G., Comeau, M. and Boisvert, M..
2007.
« Real-time correction of closed captions ».
In Proceedings of the 45th Annual Meeting of the Association of Computational Linguistics (Prague, Czech Republic, June 24-29, 2007)
pp. 113-116.
Association for Computational Linguistics (ACL).
Carter, Alan, Fiedler, Jiri, Kominek, Zdenek, Kralove, Hradec, Vacin, Ota, Barberi, Anthony and Perraton, Daniel.
2007.
« The influence of accelerated curing on cold in-place recycling ».
In Proceedings of the Fifty-Second Annual Conference of the Canadian Technical Asphalt Association (CTAA) (Niagara Falls, ON, Canada, Nov. 18-21, 2007)
pp. 215-235.
Laval, Canada : Polyscience Publications.
Catley, A., Samson, C. and van Gell, P..
2007.
« Use of seismic waves to estimate moisture distribution in solid waste ».
In OttawaGeo2007 : the diamond jubilee : 60th Canadian Geotechnical Conference and 8th Joint CGS/IAH-CNC Groundwater Conference : conference proceedings, October 21-25, 2007, Ottawa, Canada = OttawaGéo, 2007 : le jubilé de diamants : 60e Conférence géote (Ottawa, ON, Canada, Oct. 21-24, 2007)
Ottawa : OttawaGeo2007 Organizing Committee. Chaallal, O., Leboeuf, D., Cucurull, I. and Bousselham, A.. 2007. « Système d'étançonnement pour excavations peu profondes ». Communication lors de la conférence : Colloque AEG-SCG : Sécurité des tranchées et des excavations peu profondes, Montréal : 20 et 21 février 2007 (Montréal, QC, Canada, 20-21 févr. 2007).
Chaouch, Naira, Leconte, Robert, Magagi, Ramata and Temimi, Marouane.
2007.
« Soil moisture retrieval over the Mackenzie river basin using AMSR-E 6.9 GHz brightness temperature ».
In Remote Sensing for Environmental Monitoring and Change Detection (Perugia, Italy, July 2-13, 2007)
Coll. « IAHS-AISH Publication », vol. 316.
pp. 64-70.
Wallingford, England : International Association of Hydrological Sciences. Chauchat, J., Guillou, S., Pham Van Bang, D. and Nguyen, K. D.. 2007. « Modélisation diphasique de la dispersion turbulente dans le transport en suspension de particules sédimentaires ». Communication lors de la conférence : 18ème Congrès Français de Mécanique (Grenoble, France, 27-31 août 2007). Chenard, Jean-Samuel, Bourduas, Stephan, Azuelos, Nathaniel, Boulé, Marc and Zilic, Zeljko. 2007. « Hardware assertion checkers in on-line detection of faults in a hierarchical-ring network-on-chip ». Affiche présentée lors de la conférence : Design, Automation and Test in Europe Conference (DATE 2007) (Nice, France, Apr. 16-20, 2007).
Cheriet, F., Laporte, C., Kadoury, S., Labelle, H. and Dansereau, J..
2007.
« A novel system for the 3-D reconstruction of the human spine and rib cage from biplanar X-ray images ».
IEEE Transactions on Biomedical Engineering, vol. 54, nº 7.
pp. 1356-1358.
Chherawala, Y., Gagnon, O., Lepage, Richard and Doyon, G..
2007.
« Impact de la variation des paramètres scéniques sur la fidélité colorimétrique d'images numériques de denrées alimentaires ».
In Actes des 5e Ateliers sur Traitement et Analyse de l'Information : Méthodes et Applications (TAIMA) (Hammamet, Tunisie, 23-26 mai 2007)
pp. 325-330.
Coallier, François. 2007. « La mondialisation du marché des TI: menaces ou opportunités?, Comment répondre au défi de la pénurie de main-d'oeuvre en informatique? ». Communication lors de la conférence : CEGEP de Rosemont (Montréal, QC, Canada, 13 fév. 2007).
Collet, Y., Tétreault, P., Rasmussen, J., Nuño, N. and Hagemeister, N..
2007.
« Computational modeling of a prosthetic shoulder: Our experience with the anybody modeling system ».
In 18th IASTED International Conference on Modelling and Simulation (Montréal, QC, Canada, May 30-June 01, 2007)
pp. 624-629.
ACTA Press.
Coman, E., Dubourg, L., Jahazi, M. and Ghosh, K..
2007.
« A study of the deformation and residual stresses in an aircraft fuselage panel joined by friction stir welding ».
In Proceedings of the 23rd ISPE Internaional Conference on CAD/CAM Robotics and Factories of the Future -CARS & FOF'07 (Bogota, Colombia, Aug. 16-18, 2007)
Universidad Militar Nueva Granada.
Comeau, M, Masson, Christian, Morency, François and Pelletier, F.
2007.
« Estimation of icing events using NARR data ».
In 12th International Workshop on Atmospheric Icing on Structures (IWAIS) (Yokohama, Japan, Oct. 9-12, 2007)
Constantin, Nicolas G., Zampardi, Peter J. and El-Gamal, Mourad N..
2007.
« A gated envelope feedback technique for automatic hardware conditioning of RFIC PA's at low power levels ».
In IEEE/MTT-S International Microwave Symposium, 2007 (Honolulu, HI, USA, June 3-8, 2007)
pp. 139-142.
Corradini, Elisângela, de Morais, Luís C., Demarquette, Nicole R., Agnelli, José A. M. and Mattoso, Luiz H. C..
2007.
« Study of process parameters for starch, gluten, and glycerol mixtures ».
Polymers for Advanced Technologies, vol. 18, nº 10.
pp. 861-867. Côté, Carle, Champagne, Roger and Michaud, François. 2007. « Coping with architectural mismatch in autonomous mobile robotics ». Affiche numéro Affiche présentée lors de la conférence : IEEE International conference on robotics and automation (ICRA'07) (Rome, Italy, Apr. 10-14, 2007).
Côté, Marc-Alexis, Suryn, Witold and Georgiadou, Elli.
2007.
« In search for a widely applicable and accepted software quality model for software quality engineering ».
Software Quality Journal, vol. 15, nº 4.
pp. 401-416.
Coti, Camille, Rezmerita, Ala, Hérault, Thomas and Cappello, Franck.
2007.
« Grid services for MPI ».
In Recent Advances in Parallel Virtual Machine and Message Passing Interface : 14th European PVM/MPI User's Group Meeting (Paris, France, Sept. 30-Oct. 03, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4757.
pp. 393-394.
Springer.
Crainic, T. G., Errico, F., Malucelli, F. and Nonato, M..
2007.
« Towards designing flexible transportation systems ».
In Sixth Triennial Symposium on Transportation Analysis (TRISTAN VI) (Phuket, Thailand, June 10-15, 2007)
Cresson, T., Godbout, B., Branchaud, D., Aubert, B., Deschênes, S., Khoury, V., Parent, S., Labelle, H., Skalli, W., Mitton, D. and de Guise, Jacques A.. 2007. « Le système de radiographie biplan à faible irradiation EOS ». Communication lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).
Crobeddu, E. and Bennis, S..
2007.
« Modèle de lessivage des matières en suspension en milieu urbain ».
Revue des sciences de l'eau, vol. 20, nº 1.
pp. 45-57.
Croitor, E. P. N., Oliveira, L. A. and Melhado, S. B..
2007.
« Etapa de diagnóstico de um projeto de reabilitação: um estudo de Caso Francês ».
In Anais do VII Workshop Brasileiro de Gestão do Processo de Projeto na Construção de Edifícios (Curitiba, Brazil, Dec. 06-07, 2007)
CESEC-UFPR.
de Freitas, Cássia Alves, Valera, Ticiane Sanches, Catelli de Souza, Adriana Martinelli and Demarquette, Nicole Raymonde.
2007.
« Morphology of compatibilized ternary blends ».
Macromolecular Symposia, vol. 247, nº 1.
pp. 260-270.
De Jesus Mota, S., Nadeau Beaulieu, M. and Botez, Ruxandra.
2007.
« Subspace method for an F/A-18 aircraft model identification from flight tests ».
In International Forum on Aeroelasticity and Structural Dynamics (IFASD) (Stockholm, Sweden, June 18-20, 2007)
de Oliveira, L. E. S., Britto Jr., A. S and Koerich, A. L. (inventeurs) October 2007. « Computational process for wood image analysis ». (INPI), National Institute of Industrial Property (titulaire(s)). Brevet brésilien PI0704329-5.
Dehak, Réna, Dehak, Najim, Kenny, Patrick and Dumouchel, Pierre.
2007.
« Linear and non linear kernel GMM super vector machines for speaker verification ».
In Proceedings of the Annual Conference of the International Speech Communication Association, INTERSPEECH (Antwerp, Belgium, Aug. 27-31, 2007)
pp. 733-736.
ISCA.
Demarquette, Nicole R., Sanches Valera, Ticiane and Yee, Marcio.
2007.
« Relaxation process induced by core-shell morphology ».
Journal of Polymer Engineering, vol. 27, nº 9.
pp. 657-666.
Demers, V., Brailovski, V., Prokoshkin, S., Inaekyan, K., Bastarash, E., Khmelevskaya, I. and Dobatkin, S..
2007.
« Functional properties of nanostructured Ti-50.0 at % Ni alloys ».
In Fatigue and Fracture of Medical Metallic Materials and Devices (Dallas, TX, USA, Nov. 01, 2005)
Coll. « ASTM Special Technical Publication », vol. 1481.
pp. 34-44.
American Society for Testing and Materials.
Demetriou, Michalis and Lopez-Herrejon, Roberto E..
2007.
« Feature designer - a feature modeling tool for .NET ».
In 11th International Conference Software Product Lines (SPLC) - Workshop - ViSPLE 2007 (Kyoto, Japan, Sept. 10-14, 2007)
pp. 94-99.
IEEE Computer Society.
Deslandes, Dominic and Boone, François.
2007.
« Iterative design techniques for all-pole dual-bandpass filters ».
IEEE Microwave and Wireless Components Letters, vol. 17, nº 11.
pp. 775-777.
Deslandes, Dominic, Boone, François and Wu, Ke.
2007.
« Universal single-layer waveguide power divider for slot array antenna applications ».
In IEEE MTT-S International microwave symposium (IMS ) (Honolulu, HI, USA, June 3-8, 2007)
pp. 431-434.
IEEE.
Desmarais, M. and Aissaoui, R..
2007.
« Effect of variable contact area on knee articular dissipation during 3D gait analysis ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, QC, Canada, May 30-June 01, 2007)
pp. 613-617.
Anaheim, CA : ACTA Press.
Dessaint, Louis-A. and Scott, G..
2007.
« Research activities at the transénergie chair on simulation and control of power systems ».
In CIGRÉ Canada Conference on Power Systems (Montreal, QC, Canada, Oct.1-4, 2006)
Dhouib, K., Gharbi, Ali and Ayed, S..
2007.
« Throughput assessment of non-homogeneous transfer lines: simulation modeling based approach ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Dias de Assunção, Marcos, Streitberger, Werner, Eymann, Torsten and Buyya, Rajkumar.
2007.
« Enabling the simulation of service-oriented computing and provisioning policies for autonomic utility grids ».
In Grid Economics and Business Models : 4th International Workshop, GECON 2007 Rennes, France, August 28, 2007 Proceedings (Rennes, France, Aug. 28, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4685.
pp. 136-149.
Berlin, Heidelberg : Springer Berlin Heidelberg.
Diop, Amadou D., Ceanga, Emil, Rétiveau, Jean-Louis, Méthot, Jean-François and Ilinca, Adrian.
2007.
« Real-time three-dimensional wind simulation for windmill rig tests ».
Renewable Energy, vol. 32, nº 13.
pp. 2268-2290.
Djouab, R. and Suryn, Witold.
2007.
« What are obstacles of applicability of the Prometheus method? ».
In 20th International Conference on Software and Systems Engineering and their Applications (ICSSEA) (Paris, France, Dec. 4-6, 2007)
Dubé, M., Hubert, P., Yousefpour, A. and Denault, J..
2007.
« Resistance welding of thermoplastic composites skin/stringer joints ».
Composites Part A: Applied Science and Manufacturing, vol. 38, nº 12.
pp. 2541-2552.
Dubé, Martine, Hubert, Pascal, Yousefpour, Ali and Denault, Johanne.
2007.
« Fatigue performance of resistance-welded thermoplastic composite skin/stringer joints ».
In The use of composites in the 21st century to save energy and weight : SEICO 07, 28th SAMPE Europe international conference, April 02th - 04th, 2007, Hotel MERCURE Paris, Porte de Versailles ; proceedings (Paris, France, Apr. 2-4, 2007)
Society for the Advancement of Material and Process Engineering.
Dubé, Martine, Hubert, Pascal, Yousefpour, Ali, Gallet, Jan, Stavrov, Darko and Bersee, Harald E. N..
2007.
« Heating element optimisation in resistance welding of semi-crystalline and amorphous thermoplastic composites ».
In 6th Canadian Conference on Composite Materials (CANCOM 2007) (Winnipeg, MB, Canada, Aug. 14-17, 2007)
Duchaine, F., Bersee, H.E.N. and Champliaud, Henri.
2007.
« The influence of the thickness on 3D elastic material properties of unidirectional e-glass/epoxy laminated composites ».
In 6th Canadian International Conference on Composites (CANCOM) (Winnipeg, MB, Canada, Aug. 14-17, 2007)
Dupuis, K. and Petit, Y.. 2007. « Évaluation du comportement mécanique de l'os par QCT ». Communication lors de la conférence : 27e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montréal, QC, Canada, 20 avril 2007).
Duttine, A., Di Benedetto, H., Pham Van Bang, D. and Ezaoui, A..
2007.
« Anisotropic small strain elastic properties of sands and mixture of sand-clay measured by dynamic and static methods ».
Soils and Foundations, vol. 47, nº 3.
pp. 457-472.
Duttine, Antoine, Di Benedetto, Herve and Van Bang, Damien Pham.
2007.
« Viscous properties of sands and mixtures of sand/clay from hollow cylinder tests ».
In Solid Mechanics and its Applications : A Collection of Papers of the Geotechnical Symposium (Rome, Italy, Mar. 16-17, 2006)
pp. 367-382.
Springer.
Dziong, Zbigniew, Tran, Con and Sarker, Jahangir.
2007.
« Integrated economic model for design and adaptation of overlay networks ».
In 2007 1st International Symposium on Advanced Networks and Telecommunications Systems (ANTS) (Mumbai (Bombay), India, Dec. 17-18, 2007)
IEEE.
Etsida Mpiga, Félicia, Dao, Thien-My and Songmene, Victor.
2007.
« The hybrid simulation approach based on RSM and ants colony system for multiobjective optimization problem ».
In Proceedings of the 8th Asia Pacific Industrial Engineering & Management System and Chinese Institute of Industrial Engineers Conference (Kaohsiung, Taïwan, Dec. 9-12, 2007)
APIEM & CIIE.
Ezaoui, A., Di Benedetto, H. and Van Bang, D. P..
2007.
« Anisotropic behaviour of sand in the small strain domain. experimental measurements and modelling ».
In Solid Mechanics and its Applications : A Collection of Papers of the Geotechnical Symposium (Roma, Italy, Mar. 16-17, 2006)
pp. 727-742.
Springer.
Fabrício, Márcio Minto and Melhado, Silvio Burratino.
2007.
« O projeto na arquitetura e engenharia civil e a atuação em equipes multidisciplinares ».
Revista Tópos, vol. 1, nº 2.
pp. 11-18.
Fabricio, Marcio and Melhado, Silvio.
2007.
« Formação projetual em arquitetura e coordenação de projetos multidisciplinares de edifícios ».
In
O lugar do projeto no ensino e na pesquisa em arquitetura e urbanismo.
pp. 447-453. Rio de Janeiro : Contra Capa.
Fairman, M., Afrin, N., Chen, D. L., Cao, X. and Jahazi, M..
2007.
« Microstructural and microhardness evolution of friction stir processing AZ31B-H24 magnesium alloy ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
pp. 117-128.
Canadian Institute of Mining, Metallurgy and Petroleum.
Fairman, M., Afrin, N., Chen, D. L., Cao, X. and Jahazi, M..
2007.
« Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy ».
Canadian Metallurgical Quarterly, vol. 46, nº 4.
pp. 425-432.
Fallaha, C., Saad, Maarouf and Kanaan, H..
2007.
« Sliding mode control with exponential reaching law applied on a 3 DOF modular robot arm ».
In Proceedings of the European Control Conference 2007 (ECC) (Kos, Greece, July 2-5, 2007)
pp. 4925-4931.
Piscataway, N. J., USA : IEEE.
Feng, Z. and Soulaïmani, Azzeddine.
2007.
« A Newton-Krylov-POD algorithm for nonlinear aeroelasticity ».
In Conference on Systems and Control (CSC) (Marrakech, Morocco, May 16-18, 2007)
Feng, Zhengkun, Champliaud, Henri and Dao, Thien-My.
2007.
« Modelling and simulation of conical bending process with sliding rolls ».
In IFAC Workshop on Manufacturing Modelling, Management and Control (Budapest, Hungary, Nov. 14-16, 2007)
Fernberg, P. A., Samson, C., Boteler, D. H., Trichtchenko, L. and Larocca, P..
2007.
« Earth conductivity structures and their effects on geomagnetic induction in pipelines ».
Annales Geophysicae, vol. 25, nº 1.
pp. 207-218. Fernberg, P., Trichtchenko, L., Samson, C. and Boteler, D.. 2007. « Frequency analysis of telluric currents and pipe-to-soil variations along a pipeline in the Ottawa Valley ». Communication lors de la conférence : NACE (The International Corrosion Society) Northern Area Eastern Conference (Ottawa, ON, Canada, Sept. 24-26, 2007). Fernberg, P.A., Samson, C., Trichtchenko, L. and Boteler, D.H.. 2007. « Preliminary results from the 2006 magnetotelluric survey investigating earth conductivity structures and their effects on geomagnetic induction along a pipeline in the Arnprior-Ottawa area ». Communication lors de la conférence : POLARIS Ontario workshop (London, ON, Canada, June 03-04, 2007).
Forghani, Nosratallah, Forouzanfar, Mohamad and Forouzanfar, Elham.
2007.
« MRI fuzzy segmentation of brain tissue using IFCM algorithm with particle swarm optimization ».
In 22nd International Symposium on Computer and Information Sciences (ISCIS) (Ankara, Turkey, Nov. 07-09, 2007)
pp. 246-249.
IEEE Computer Society.
Forgues, Daniel, Koskela, L. and Lejeune, A..
2007.
« Maximizing value generation through integrated construction programs ».
In European Academy of Management (EURAM) (Paris, France, May 16-19, 2007)
Forouzanfar, M. and Moghaddam, H. A..
2007.
« A directional multiscale approach for speckle reduction in optical coherence tomography images ».
In International Conference on Electrical Engineering (ICEE) (Lahore, Pakistan, Apr. 11-12, 2007)
IEEE Computer Society.
Forouzanfar, Mohamad, Moghaddam, Hamid Abrishami and Dehghani, Maryam.
2007.
« Speckle reduction in medical ultrasound images using a new multiscale bivariate Bayesian MMSE-based method ».
In IEEE 15th Signal Processing and Communications Applications (SIU) (Eskisehir, Turkey, June 11-13, 2007)
IEEE Computer Society. Fraser, M. and Surette, C.. 2007. « Analyse de la teneur en mercure dans les homards et les moules de la région de Belledune, Baie des Chaleurs, Nouveau-Brunswick ». Communication lors de la conférence : 18e concours des jeunes chercheures et chercheurs ACFAS-Acadie/FESR (Moncton, NB, Canada, 21 mars 2007). Fraser, M. and Surette, C.. 2007. « Heavy metal concentrations in lobsters and mussels from the Belledune area, New Brunswick ». Affiche présentée lors de la conférence : 34th Annual Aquatic Toxicity Workshop (Halifax, NS, Canada, Sept. 30-Oct. 03, 2007). Fraser, M. and Surette, C.. 2007. « Teneurs en métaux lourds dans les homards et les moules de la région de Belledune, Nouveau-Brunswick ». Affiche présentée lors de la conférence : 5e Congrès Armand-Frappier (Orford, QC, Canada, 8-10 nov. 2007).
Fuentes, A., Hagemeister, Nicola, Südhoff, I., Fernandes, J., Ranger, P. and de Guise, Jacques A..
2007.
« New 3D biomedical and imaging technologies to evaluate the effect of anterior cruciate ligament reconstruction : preliminary results ».
[Conference paper summary]. Clinical Journal of Sports Medicine, vol. 17, nº 2.
p. 165.
Fuentes, Alexandre, Hagemeister, Nicola, Ranger, Pierre, Heron, Timothy and de Guise, Jacques A..
2007.
« ACL rupture increases knee adduction moment during gait ».
In 6th Combined Meeting of the Orthopedic Research Societies (Honolulu, HI, USA, Oct. 21-24, 2007)
p. 36.
Gagnon, François. 2007. « Wireless prototyping and testing, research activities ». Communication lors de la conférence : International Symposium on Signals, Systems and Electronics (ISSSE) (Montreal, QC, Canada, July 30-Aug. 2, 2007).
Gauthier, Guy and Boulet, B..
2007.
« Robust design of terminal ILC with H-infinity mixed sensitivity approach for thermoforming oven ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal : École de technologie supérieure.
Ghassabeh, Youness Aliyari, Forghani, Nosratallah, Forouzanfar, Mohamad and Teshnehlab, Mohammad.
2007.
« MRI fuzzy segmentation of brain tissue using IFCM algorithm with genetic algorithm optimization ».
In IEEE/ACS International Conference on Computer Systems and Applications (AICCSA) (Amman, Jordan, May 13-16, 2007)
pp. 665-668.
IEEE. Giard, P., Boland, J. F. and Belzile, J.. 2007. « CORBA based communication for verification ». Communication lors de la conférence : CMC Microsystems 2007 Annual Symposium (Ottawa, ON, Canada, Oct. 18, 2007).
Giguère, Gyslain, Chartier, Sylvain, Proulx, Robert and Lina, Jean-Marc.
2007.
« Category development and reorganization using a bidirectional associative memory-inspired architecture ».
In Proceedings of ICCM 2007 - 8th International Conference on Cognitive Modeling (Ann Arbor, MI, USA, July 26-29, 2007)
pp. 97-102.
Oxford, UK : Taylor and Francis/Psychology Press. Grami, S. and Bigras, Pascal. 2007. « Identification of a new friction model bases on robust adaptive observer ». Communication lors de la conférence : International Multi-Conference on Systems, Signals and Devices (Hammamet, Tunisia, Mar. 19-22, 2007).
Grigorie, Lucian Teodor and Botez, Ruxandra.
2007.
« Validation of aeroservoelastic interactions between the rigid, elastic and control modes ».
In 31st Congress of the American Romanian Academy of Arts and Sciences (ARA) (Brasov, Romania, July 31-Aug. 5, 2007)
ARA.
Grilo, Leonardo, Melhado, Silvio, Silva, Sérgio Alfredo Rosa, Edwards, Peter and Hardcastle, Cliff.
2007.
« International building design management and project performance: case study in São Paulo, Brazil ».
Architectural Engineering and Design Management, vol. 3, nº 1.
pp. 5-16.
Guerra, J. S., Gusmao, A. and Melhado, S. B..
2007.
« Avaliação da prática de coordenação de projetos nos empreendimentos ?classe a? nas empresas de construção de edifícios da cidade do recife certificadas em gestão da qualidade ».
In Anais do VII Workshop Brasileiro de Gestão do Processo de Projeto na Construção de Edifícios (Curitiba, Brazil, Dec. 06-07, 2007)
CESEC-UFPR.
Gupta, V., Ernst, R. E., Samson, C. and Desnoyers, D. W..
2007.
« Determining flow history and direction for a possible 6000 km long east-west canali system southeast of Aphrodite Terra ».
In 38th Lunar and Planetary Science Conference (Houston, TX., USA, Mar. 12-16, 2007)
Coll. « LPI Contribution », vol. 1338.
Houston, TX, USA : Lunar and Planetary Institute.
Hacini, L., Lê, Van Ngan and Bocher, Philippe.
2007.
« Traitement de surfaces par impacts : évaluation des contraintes résiduelles induites par martelage ».
In 18e Congrès Français de Mécanique (Grenoble, France, 27-31 août 2007)
Courbevoie, France : AFM, Maison de la Mécanique.
Haillot, D., Py, X., Goetz, V. and Benabdelkarim, M..
2007.
« Composites de stockages pour l’optimisation des chauffe-eau solaires ».
In 11e congrès de la Société française de génie des procédés (SFGP 2007) (Saint-Étienne, France, 9-11 octobre 2007)
Haillot, D., Py, X., Goetz, V. and Benabdelkarim, M..
2007.
« Storage composites for the optimization of solar water heating systems ».
In International Conference on Carbon for Energy Storage and Environnement Protection (CESEP 07) (Krakow, Poland, Sept. 02-06, 2007)
Haillot, Didier, Py, Xavier, Goetz, Vincent and Benabdelkarim, Mohamed.
2007.
« Étude de matériaux composites à base de graphite naturel expansé en vue de l’intensification des performances des chauffe-eau solaires ».
In 15e congrès de la Société Française de Thermique (SFT 2007) (Iles des Embiez, France, 29 mai-1er juin 2007)
Société Française de Thermique.
Hajji, A., Gharbi, Ali and Kenné, Jean-Pierre.
2007.
« Joint optimal production / setup policies for three family products in unreliable supply chains ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Hammad, Amin and Motamedi, Ali.
2007.
« Framework for lifecycle status tracking and visualization of constructed facility components ».
In 7th International Conference on Construction Applications of Virtual Reality (CONVR 20007) (University Park, PA, USA, oct. 23-24, 2007)
pp. 224-232.
Hamouda, M., Al-Haddad, K., Fnaiech, F. and Blanchette, H..
2007.
« Input-state feedback linearization control of two-stage matrix converters interfaced with high-speed microturbine generators ».
In IEEE Canada Electrical Power Conference (EPC) (Montréal, QC, Canada, Oct. 25-26, 2007)
pp. 302-307.
IEEE Canada.
Harker, Matthew, O'Leary, Paul, Kharicha, Mihaela Stefan and Eck, Sven.
2007.
« Calibration, measurement and error analysis of optical temperature measurement via laser induced fluorescence ».
In IEEE Instrumentation and Measurement Technology Conference (Warsaw, Poland, May 01-03, 2007)
Institute of Electrical and Electronics Engineers. Harrison, J., Ferrie, F., Kusevic, K., Iles, P., Mrstik, P., Hefford, S. and Samson, C.. 2007. « Improved position estimation via LIDAR registration ». Communication lors de la conférence : 9th Annual Scientific Conference of the GEOIDE Network (Halifax, NS, Canada, June 06-08, 2007).
Hausler, Robert, Gesuale, G., Payment, P., Gagnon, C., Locas, A. and Gagné, F..
2007.
« Ozone for the treatment of wastewater ».
In 18th Ozone World Congress and 4th International Congress on Ultraviolet Technologies (Los Angeles, CA, USA, Aug. 27-29, 2007)
Hefford, S., Samson, C., Harrison, J., Ferrie, F., Kusevic, K., Iles, P. and Mrstik, P.. 2007. « Lidar data acquisition for pose correction of dynamic sensors ». Communication lors de la conférence : 9th Annual Scientific Conference of the GEOIDE Network (Halifax, NS, Canada, June 06-08, 2007). Henderson, A. D. and Demond, A. H.. 2007. « Comparison of iron sulfide and zero-valent iron as reactive materials for the removal of arsenic from groundwater ». Communication lors de la conférence : American Geophysical Union, Fall Meeting (San Francisco, CA, USA, Dec. 10-14, 2007).
Henderson, Andrew D. and Demond, Avery H..
2007.
« Long-term performance of zero-valent iron permeable reactive barriers: A critical review ».
Environmental Engineering Science, vol. 24, nº 4.
pp. 401-423.
Hochuli, A. G., Britto, A. S. and Koerich, A. L..
2007.
« Detection of non-conventional events on video scenes ».
In IEEE International Conference on Systems, Man and Cybernetics, 2007. ISIC, Oct. 7-10, 2007)
pp. 302-307.
Hochuli, A. G., Oliveira, L. E. S., Britto, A. S. and Koerich, A. L..
2007.
« Detection and classification of human movements in video scenes ».
In Advances in Image and Video Technology. Second Pacific Rim Symposium, PSIVT 2007, 17-19 Dec. 2007 (Santiago, Chile, Dec. 17-19, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4872.
pp. 678-691.
Berlin, Germany : Springer-Verlag.
Hourmilougué, G., Ramudhin, Amar and Paquet, Marc.
2007.
« Due date assignment in a disassembly/assembly system ».
In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)
Houweling, Dwight, Monette, Frédéric, Millette, Louise and Comeau, Yves.
2007.
« Modelling nitrification of a lagoon effluent in moving-bed biofilm reactors ».
Water Quality Research Journal of Canada, vol. 42, nº 4.
pp. 284-294. Howard, Brett, Robert, Jean-Marc, Kierstead, Paul and D'Souza, Scott David (inventeurs) 16 October 2007. « Secret hashing for TCP SYN/FIN correspondence ». Alcatel Canada Inc. (titulaire(s)). Brevet américain US 7,284,272.
Humbert, L., de Guise, J. A., Godbout, B., Parent, S., Mitton, D. and Skalli, W..
2007.
« 3D reconstruction of the spine from biplanar x-rays using longitudinal and transversal inferences ».
[Conference paper summary]. Journal of Biomechanics, vol. 40, nº Supp. 2.
S160.
Iordanova, I. and Tidafi, T..
2007.
« Multimodal representation of referents for the architectural design studio: Some cognitive aspects ».
International Journal of Design Sciences and Technology, vol. 14, nº 2.
pp. 105-118.
Iordanova, Ivanka, Tidafi, Temy and Paoli, Giovanni De.
2007.
« Is a digital model worth a thousand pictures? ».
In Proceedings of the 12th Computer-Aided Architectural Design Futures Conference (CAADFutures) (Sydney, NSW, Australia, July 11-13, 2007)
pp. 85-98.
Kluwer Academic Publishers.
Jaafar, Wael, Ajib, Wessam and Tabbane, Sami.
2007.
« The capacity of MIMO-based wireless mesh networks ».
In 15th IEEE International Conference on Networks (ICON) (Adelaide, Australia, Nov. 19-21, 2007)
pp. 259-264.
IEEE.
Kadoury, Samuel, Cheriet, Farida, Laporte, Catherine and Labelle, Hubert.
2007.
« A versatile 3D reconstruction system of the spine and pelvis for clinical assessment of spinal deformities ».
Medical and Biological Engineering and Computing, vol. 45, nº 6.
pp. 591-602.
Kalva, P. R., Enembreck, F. and Koerich, A. L..
2007.
« WEB image classification based on the fusion of image and text classifiers ».
In Ninth International Conference on Document Analysis and Recognition, 2007. ICDAR 2007 (Parana, Brazil, Sept. 23-26, 2007)
pp. 561-568.
Kanaan, H. Y., Georges, S., Hayek, A. and Al-Haddad, K..
2007.
« Frequency-domain small-signal modeling of a three-phase four-wire shunt active power filter ».
In IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Montréal, QC, Canada, Aug. 05-08, 2007)
pp. 542-545.
IEEE.
Kara, N. and Planat, V..
2007.
« Performance analysis of IP multimedia services over HSDPA mobile networks ».
In 2007 International Conference on IP Multimedia Subsystem Architecture and Applications (IMSAA) (Bangalore, India, Dec. 6-8, 2007)
Institute of Electrical and Electronics Engineers.
Kara, Nadja and Dragoi, Andrei.
2007.
« Realising multiplayers scenarios for remote biomonitoring ».
In Telehealth '07: The Third IASTED International Conference on Telehealth (Montreal, QC, Canada, May 30 - June 1, 2007)
pp. 17-22.
Acta Press.
Kara, Nadja and Dragoi, O. Andrei.
2007.
« Reasoning with contextual data in telehealth applications ».
In Third IEEE International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob 2007) (White Plains, NY, USA, Oct. 8-10, 2007)
Institute of Electrical and Electronics Engineers.
Kenny, Patrick, Boulianne, Gilles, Ouellet, Pierre and Dumouchel, Pierre.
2007.
« Joint factor analysis versus eigenchannels in speaker recognition ».
IEEE Transactions on Audio, Speech, and Language Processing, vol. 15, nº 4.
pp. 1435-1447.
Kenny, Patrick, Boulianne, Gilles, Ouellet, Pierre and Dumouchel, Pierre.
2007.
« Speaker and session variability in GMM-based speaker verification ».
IEEE Transactions on Audio, Speech, and Language Processing, vol. 15, nº 4.
pp. 1448-1460.
Khaled, A., Tremblay, R. and Massicotte, B..
2007.
« Comportement des piles rectangulaires de ponts sous l’effet des mouvements sismiques multidirectionnels ».
In 14e Colloque sur la Progression de la Recherche Québécoise sur les Ouvrages d'Art (Québec, Canada, 8-9 mai 2007)
Québec, Canada : Transports Québec. Kiss, M-O, Hagemeister, N., Levasseur, A., Fernandes, J., Lussier, B. and Petit, Y.. 2007. « Utilisation d'une pince à refroidissement thermiélectrique lors d'essais in vitro de traction cyclique et de tests à bris ». Communication lors de la conférence : 27e Journée de la Recherche du POES et de la Division d'Orthopédique de l'Université de Montréal (Montréal, QC, Canada, 20 avril 2007).
Lamarche, Bruno and Rivest, Louis.
2007.
« Dynamic product modeling with inter-features associations: comparing customization and automation ».
In International Computer Aided Design Conference and Exhibition (CAD) (Honolulu, HI, USA, June 25-29, 2007)
pp. 877-886.
Langar, Rami, Bouabdallah, Nizar and Boutaba, Raouf.
2007.
« Adaptive mobility management for IP/MPLS -based wireless networks: A proposal and analysis ».
In IEEE GLOBECOM 2007 - IEEE Global Telecommunications Conference (Washington, DC, USA, Nov. 26-30, 2007)
pp. 1786-1791.
IEEE.
Laporte, Catherine and Arbel, Tal.
2007.
« Probabilistic speckle decorrelation for 3D ultrasound ».
In Medical Image Computing and Computer-Assisted Intervention – MICCAI 2007 : 10th International Conference, Brisbane, Australia, October 29 - November 2, 2007, Proceedings, Part I (Brisbane, Australia, Oct. 29 - Nov. 02, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4791.
pp. 925-932.
Springer.
Laporte, Catherine, Clark, J. James and Arbel, Tal.
2007.
« A fractal multi-dimensional ultrasound scatterer distribution model ».
In 4th IEEE International Symposium on Biomedical Imaging: From Nano to Macro (ISBI 2007) (Arlington, TX, USA, Apr. 12-15, 2007)
pp. 880-883.
IEEE.
Laporte, Claude Y..
2007.
« Standards application in very small enterprises ».
IEEE Computer, vol. 40, nº 10.
pp. 22-23.
Laporte, Claude Y., Roy, Denis, Doucet, Mikel and Drolet, Marc.
2007.
« Improvement of software engineering performances an experience report at Bombardier transportation - total transit systems signalling group ».
In INCOSE International Symposium (San Diego, CA, USA, June 24-28, 2007)
pp. 1285-1303.
INCOSE.
Larbi, R., Alpan, G., Baptiste, P. and Penz, B..
2007.
« Scheduling of transhipment operations in a crossdock with a single strip door and a single stack door ».
In 19th International Conference of Production Research, ICPR (Valparaiso, Chile, July 29-Aug. 02, 2007)
Lê, Van Ngan and Nguyen, Hoa Ngan.
2007.
« Using 2-D axisymmetric finite elements for fatigue analysis of shrink-fit hub and shaft assemblies ».
In Proceedings of the 8th National Conference on Mechanics (Hanoi, Viêt Nam, Dec. 6-9, 2007)
Leboeuf, Denis, Chaallal, Omar and Lan, André. 2007. « Utilisation de profilés métallique et de tuyaux PEHD pour l'étançonnement des tranchées ». Communication lors de la conférence : Colloque AEG-SCG : Sécurité des tranchées et des excavations peu profondes, Montréal : 20 et 21 février 2007 (Montréal, QC, Canada, 20-21 févr. 2007). Lejeune, Michel. 2007. « La reconnaissance des acquis de l’expérience aux États-Unis : enjeux et instrumentation ». Communication lors de la conférence : 75e Congrès de l'Acfas (Trois-Rivières, QC, Canada, 7-11 mai 2007). Lemaire, R., Therssen, E. and Desgroux, P.. 2007. « Comparison of sooting tendencies of diesel fuel and vegetable oil ester by two-color LII ». Affiche présentée lors de la conférence : Gordon Research Conference on Laser Diagnostics in Combustion (Oxford, United Kingdom, Aug. 12-17, 2007). Lerouge, Sophie. 2007. « Bioactive coating for vascular repair: towards improved endovascular aneurysm repair ». Communication lors de la conférence : International Symposium on Polymeric Materials for Regenerative Medicine (PMRM2007) (Boucherville, QC, Canada, Apr. 2-4, 2007).
Lessard, S., Bigras, Pascal, Bonev, Ilian, Briot, S. and Arakelyan, V..
2007.
« Optimum static balancing of the parallel robot for medical 3D-ultrasound imaging ».
In 12th World Congress in Mechanism and Machine Science (Besançon, France, June 18-21, 2007)
Levasseur, A., Dupuis, K. and Petit, Y.. 2007. « Influence de la microstructure sur l'évaluation des propriétés mécaniques par tomodensitométrie ». Communication lors de la conférence : 27e Journée de la Recherche du POES et de la Division d'Orthopédique de l'Université de Montréal (Montréal, QC, Canada, 20 avril 2007).
Levesque, D., Dubourg, L., Mandache, C., Kruger, S. E., Lord, M., Merati, A., Jahazi, M. and Monchalin, J-P..
2007.
« Synthetic aperture focusing technique for the ultrasonic evaluation of friction stir welds ».
In Review of Progresses in Quantitative Nondestructive Evaluation : 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007)
Coll. « AIP conference proceedings », vol. 975.
pp. 263-270.
AIP Publishing.
Liu, A., Chen, D. L., Bhole, S., Cao, X. and Jahazi, M..
2007.
« Corrosion behavior of the stir zone in friction stir welded dissimilar joint of 2024 aluminium to AZ31 magnesium alloys ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
pp. 129-140.
Canadian Institute of Mining, Metallurgy and Petroleum.
Lopez-Herrejon, Roberto.
2007.
« Language and UML support for features: Two research challenges ».
In 1st International Workshop on Variability Modelling of Software-Intensive Systems (VaMoS) (Limerick, Ireland, Jan. 16-18, 2007)
pp. 97-100.
Lopez-Herrejon, Roberto E. and Apel, Sven.
2007.
« Measuring and characterizing crosscutting in aspect-based programs: Basic metrics and case studies ».
In Fundamental Approaches to Software Engineering : 10th International Conference, FASE 2007, Held as Part of the Joint European Conferences, on Theory and Practice of Software, ETAPS 2007, Braga, Portugal, March 24 - April 1, 2007. Proceedings (Braga, Portugal, Mar. 24-Apr. 01, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4422.
pp. 423-437.
Springer.
Lopez-Herrejon, Roberto E. and Batory, Don.
2007.
« Modeling features in aspect-based product lines with use case slices: An exploratory case study ».
In Models in Software Engineering : Workshops and Symposia at MoDELS 2006, Genoa, Italy, October 1-6, 2006, Reports and Revised Selected Papers (Genova, Italy, Oct. 01-06, 2006)
pp. 6-16.
Berlin, Heidelberg : Springer Berlin Heidelberg.
Loyka, Sergey, Kostina, Victoria and Gagnon, François.
2007.
« Symbol error rates of maximum-likelihood detector : convex/concave behavior and applications ».
In IEEE International Symposium on Information Theory (ISIT) (Nice, France, June 24-29, 2007)
pp. 2501-2505.
IEEE Information Theory Society.
Mac-Thiong, Jean-Marc, Labelle, Hubert, Parent, Stefan, Poitras, Benoit, Jodoin, Alain, Ouellet, Jean and Duong, Luc.
2007.
« Assessment of sacral doming in lumbosacral spondylolisthesis ».
Spine, vol. 32, nº 17.
pp. 1888-1895. Mah, J.K., Samson, C. and McKinnon, S.. 2007. « Mapping underground rock structures using 3D laser imaging ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Apr. 12-13, 2007). Mah, J.K., Samson, C., McKinnon, S. and English, C.. 2007. « Mapping underground rock structures using 3D Laser Imaging ». Communication lors de la conférence : POLARIS Ontario workshop (London, ON, Canada, June 03-04, 2007).
Mandache, C., Merati, A., Dubourg, L. and Jahazi, M..
2007.
« Pulsed Eddy Current Inspection of friction stir welded components ».
In ASNT fall conference and quality testing show 2007 (Las Vegas, NV, USA, Nov. 12-16, 2007)
ASNT.
Manzione, L. and Melhado, S. B..
2007.
« Coordenação eficaz: quais as principais ações que um coordenador deve adotar em situações críticas? ».
In Anais do V Simpósio Brasileiro de Gestão e Economia da Construção (SIBRAGEC) (Campinas, Brazil, Oct. 29-31, 2007)
FEC-UNICAMP.
Manzione, Leonardo and Melhado, Silvio B..
2007.
« Porque os Projetos atrasam? Uma análise crítica da ineficácia do planejamento de projetos adotada no mercado imobiliário de São Paulo ».
In III Encontro de Tecnologia de Informação e Comunicação na Construção Civil (TIC) (Porto Alegre, Brezil, July 11-12, 2007)
Porto Alegre : ANTAC.
Manzione, Leonardo and Melhado, Silvio Burratino.
2007.
« Why is design delivery always behind schedule? A critical review of the design planning techniques adopted for real estate projects in São Paulo - Brazil ».
In Proceedings of CIB world building congress 2007 (Cape Town, South Africa, May 14-17, 2007)
pp. 850-862.
Rotterdam : International Council for Research and Innovation in Building and Construction. Maranzana, Roland, Msaaf, Omar and Rivest, Louis. 2007. « Interprétation des modèles géométriques 3D : application à la recherche de pièces et à la comparaison de leurs représentations géométriques ». Communication lors de la conférence : 75e Congrès de l'Association Francophone pour le Savoir (ACFAS) (Trois-Rivières, QC, Canada, 7-11 mai 2007). Maref, W., Manning, M. M., Rousseau, M. Z. and Lei, W.. 2007. « Characterization of the hygrothermal performance of wall systems ». Communication lors de la conférence : ASHRAE seminar 29 : Moisture Management Concerns in Commercial and Residential Buildings (New York City, NY, USA, Jan. 21, 2008).
Maref, W., Manning, M., Lacasse, M. A., Kumaran, M. K., Cornick, S. M. and Swinton, M. C..
2007.
« Laboratory demonstration of solar driven inward vapour diffusion in a wall assembly ».
In Proceedings : 11th Canadian Conference on Building Science and Technology (Banff, AB, Canada, Mar. 22-23, 2007)
National Building Envelope Council.
Maref, W., O'Connor, T., Elmahdy, A. H. and Swinton, M. C..
2007.
« Method to determine the dynamic thermal resistance of compressed air foam ».
In Proceedings : 12th Symposium for Building Physics (Dresden, Germany, March 29-31, 2007)
Technische Universitat Dresden. Maref, Wahid. 2007. « Hygrothermal performance of wall and window systems ». Communication lors de la conférence : 18th Session of Canada Japan Housing Committee Meeting (Ottawa, ON, Canada, Oct. 17, 2007).
Mary, C. and Jahazi, M..
2007.
« Linear friction welding of IN-718 process optimization and microstructure evolution ».
In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006)
Coll. « Advanced Materials Research »
pp. 357-362.
Vancouver, BC, Canada : Trans Tech Publications.
Masson, J. F., Collins, P., Perraton, D. and Al-Qadi, I..
2007.
« Rapid assessment of the tracking resistance of bituminous crack sealants ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 34, nº 1.
pp. 126-131.
Mayer, C., Ilinca, A., Fortin, G. and Perron, J..
2007.
« Wind tunnel study of electro-thermal de-icing of wind turbine blades ».
International Journal of Offshore and Polar Engineering, vol. 17.
pp. 182-188. McCausland, P. J. A., Samson, C. and Deslauriers, A.. 2007. « Bulk densities of meteorites via visible light 3D laser imaging ». Communication lors de la conférence : 70th Annual Meeting of the Meteoritical Society (Tucson, AZ, USA, Aug. 13-17, 2007).
Meghoufel, A., de Guise, J. A., Crevier-Denoix, N. and Cloutier, G..
2007.
« B-Scan images simulation of the equine superficial digital flexor tendon ».
[Conference paper summary]. Journal of the Society for Simulation in Healthcare, vol. 2, nº 2.
p. 153.
Melhado, S.B..
2007.
« Coordenação de verdade ».
Construção Mercado (São Paulo).
p. 48.
Melhado, Silvio.
2007.
« Arquiteto : o profissional do futuro ».
AECweb.
Melhado, Silvio.
2007.
« Coordenação de projetos : atribuições e responsabilidades ».
AECweb.
Melhado, Silvio.
2007.
« Projeto deve ser pensado como produto e como serviço ».
AECweb.
Ménard, Michaël and Kirk, Andrew G..
2007.
« Assessment of integration of off-axis Fresnel lenses into a free-space interconnect ».
Applied Optics, vol. 46, nº 30.
pp. 7500-7505.
Meslioui, Sid-Ali, Cunningham, Mark and Germain, Patrick.
2007.
« Determination of CFD turbulence scales for lobed mixer jet noise prediction ».
In 2007 ASME Turbo Expo (Montreal, QC, Canada, May 14-17, 2007)
pp. 1541-1549.
American Society of Mechanical Engineers.
Miraoui, Moeiz and Tadj, Chakib.
2007.
« A service oriented definition of context for pervasive computing ».
In 16th International Conference on Computing (ICC) (Mexico City, Mexico, Nov. 4-9, 2007)
IEEE Computer Society.
Moha, Naouel.
2007.
« Detection and correction of design defects in object-oriented designs ».
In OOPSLA 2007 - Companion to the 22nd International Conference on Object-Oriented Programming Systems, Languages, and Applications (Montreal, QC, Canada, Oct. 21-25, 2007)
pp. 949-950.
ACM.
Moha, Naouel and Guéhéneuc, Yann-Gäel.
2007.
« DECOR: A tool for the detection of design defects ».
In ASE'07 - Proceedings of the twenty - second ACM/IEEE International Conference on Automated Software Engineering (Atlanta, GA, USA, Nov. 05-09, 2007)
pp. 527-528.
ACM.
Moha, Naouel and Guéhéneuc, Yann-Gäel.
2007.
« PTIDEJ and DECOR: Identification of design patterns and design defects ».
In OOPSLA 2007 - Companion to the 22nd International Conference on Object-Oriented Programming Systems, Languages, and Applications (Montreal, QC, Canada, Oct. 21-25, 2007)
pp. 868-869.
ACM.
Monfet, D., Zmeureanu, R., Charneux, R. and Lemire, N..
2007.
« Computer model of a university building using the energyplus program ».
In Proceedings of the 9th International Building Performance Simulation Association (IBPSA) (Beijing, China, Sept. 06-03, 2007)
pp. 1522-1529.
International Building Performance Simulation Association.
Morey, Françis and Seers, Patrice.
2007.
« Étude de la variation cyclique des températures d'échappement d'un moteur à allumage commandé ».
In VIIIe colloque interuniversitaire franco-québécois : thermique des systèmes : actes : Montréal mai 2007 (Montréal, QC, Canada, 28-30 mai 2007)
pp. 487-490.
Montréal; Varennes, Québec : École de technologie supérieure ; Ressources naturelles du Canada.
Nakamura, M., Salisbury, D. F., Hirayasu, Y., Bouix, S., Pohl, K. M., Yoshida, T., Koo, M. S., Shenton, M. E. and McCarley, R. W..
2007.
« Neocortical gray matter volume in first-episode schizophrenia and first-episode affective psychosis: A cross-sectional and longitudinal MRI study ».
Biological Psychiatry, vol. 62, nº 7.
pp. 773-783.
Nguyen, H.N., Lê, Van Ngan, Champliaud, Henri and Martin, Francis.
2007.
« Stress concentration factor in shrink-fit shaft based on 3-D finite elements ».
In Proceedings of the 8th National Conference on Mechanics (Hanoi, Viêt Nam, Dec. 6-9, 2007)
Nguyen-Tri, Phuong, Villoutreix, Gilbert and Bui, Chuong. 2007. « Étude du processus de recyclage du polypropylène et préparation de composites renforcés selon le concept du développement durable ». Communication lors de la conférence : Journée des thèses (Paris, France, 19 juin 2007).
Niethammer, M., Reuter, M., Wolter, F. E., Bouix, S., Peinecke, N., Koo, M. S. and Shenton, M. E..
2007.
« Global medical shape analysis using the Laplace-Beltrami spectrum ».
In Medical Image Computing and Computer-Assisted Intervention – MICCAI 2007 : 10th International Conference, Proceedings, Part I (Brisbane, Australia, Oct. 29-Nov. 02, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4791.
pp. 850-857.
Springer Verlag.
Niethammer, Marc, Bouix, Sylvain, Aja-Fernández, Santiago, Westin, Carl-Fredrik and Shenton, Martha E..
2007.
« Outlier rejection for diffusion weighted imaging ».
In Medical Image Computing and Computer-Assisted Intervention – MICCAI 2007 : 10th International Conference, Proceedings, Part I (Brisbane, Australia, Oct. 29-Nov. 02, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4791.
pp. 161-168.
Springer Verlag.
Nikiema, J., Brzezinski, R. and Heitz, M..
2007.
« Elimination of methane generated from landfills by biofiltration: a review ».
Reviews in Environmental Science and Bio/Technology, vol. 6, nº 4.
pp. 261-284.
Nikiema, J. and Heitz, M..
2007.
« Biofiltration of methane issued from landfills, an experimental lab-scale study ».
In 100th Annual Conference and Exhibition of the Air and Waste Management Association 2007, ACE 2007 (Pittsburgh, PA, USA, June 26-29, 2007)
pp. 3763-3769.
Air and Waste Management Association.
Nikiema, J. and Heitz, M..
2007.
« Control of methane emissions issuing from landfills : The Canadian case ».
In Biotechniques for Air Pollution Control : proceedings of the II International Congress on Biotechniques for Air Pollution Control (La Coruna, Spain, Oct. 03-05, 2007)
pp. 193-200.
A Coruña : Universidade de A Coruña, Servizo de Publicacións.
Nikiema, Josiane, Dastous, Paul-André and Heitz, Michèle.
2007.
« Elimination of volatile organic compounds by biofiltration: A review ».
Reviews on Environmental Health, vol. 22, nº 4.
pp. 273-294.
Nikiema, Josiane and Heitz, Michèle.
2007.
« Biofiltration of methane, an innovative approach ».
In 14th IUAPPA World Congress : Clean air partnerships: coming together for clean air : Brisbane 2007 : conference proceedings, incorporating the 18th CASANZ Conference hosted by the Clean Air Society of Australia and New Zealand, Brisbane Convention and Exh (Brisbane, Queensland, Australia, Sept. 09-13, 2007)
New South Wales Clean Air Society of Australia and New Zealand.
Nollet, Marie-José and Karbassi, Amin.
2007.
« The adaptation of the FEMA 154 methodology for the rapid visual screening of existing buildings in accordance with NBCC-2005 ».
In 9th Canadian Conference on Earthquake Engineering (CCEE) (Ottawa, ON, Canada, June 26-29, 2007)
Nollet, Marie-José and Karbassin, Amin.
2007.
« Seismic vulnerability assessment of existing buildings using the score assignment method - principles and applications ».
In Fifth International Conference on Seismology and Earthquake Engineering (SEE) (Tehran, Iran, May 13-16, 2007)
Oliverira, Otávio J. and Melhado, Silvio B..
2007.
« Avaliação de desempenho de projetos e empresas de projeto de edifícios ».
Integração, vol. 13, nº 48.
pp. 5-10.
Pedersoli, Marco, Gonzàlez, Jordi, Chakraborty, Bhaskar and Villanueva, Juan J..
2007.
« Enhancing real-time human detection based on histograms of oriented gradients ».
In
Computer Recognition Systems 2.
Coll. « Advances in Soft Computing », vol. 45.
pp. 739-746. Springer.
Pellerin, R. and Gharbi, Ali.
2007.
« Production control of remanufacturing systems with general repair time distributions ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Pellerin, Robert, Boulet, Jean-François, Gharbi, Ali and Kenné, Jean-Pierre.
2007.
« Développement d'une politique intégrée de contrôle des taux de production et de maintenance corrective avec diagnostic ».
INFOR : Information Systems and Operational Research, vol. 45, nº 4.
pp. 197-207. Pham Van Bang, D., Bertrand, F. and Camenen, B.. 2007. « Analysis of the sedimentation and consolidation from MRI experimentation and 1D-FE-FCT numerical investigation ». Communication lors de la conférence : 9th International Conference on Nearshore Estuarine Cohesive Sediment Transport Processes INTERCOH (Brest, France, Sept. 25-28, 2007).
Pham Van Bang, D., Di Benedetto, H., Duttine, A. and Ezaoui, A..
2007.
« Viscous behaviour of dry sand ».
International Journal for Numerical and Analytical Methods in Geomechanics, vol. 31, nº 15.
pp. 1631-1658. Ploeger, S.K., Atkinson, G.M. and Samson, C.. 2007. « Applying the HAZUS-MH software tool to assess seismic hazard and risk in Ottawa, Canada ». Communication lors de la conférence : CIG/ISPRS Conference on Geomatics for Disaster and Risk Management (Toronto, ON, Canada, May 23-25, 2007). Ploeger, S.K., Atkinson, G.M. and Samson, C.. 2007. « Applying the HAZUS-MH software tool to assess seismic hazard and risk in Ottawa, Canada ». Communication lors de la conférence : POLARIS Ontario workshop (London, ON, Canada, June 03-04, 2007).
Pohl, K. M., Bouix, S., Nakamura, M., Rohlfing, T., McCarley, R. W., Kikinis, R., Grimson, W. E. L., Shenton, M. E. and Wells, W. M..
2007.
« A hierarchical algorithm for MR brain image parcellation ».
IEEE Transactions on Medical Imaging, vol. 26, nº 9.
pp. 1201-1212.
Pohl, K. M., Fisher, J., Bouix, S., Shenton, M., McCarley, R. W., Grimson, W. E. L., Kikinis, R. and Wells, W. M..
2007.
« Using the logarithm of odds to define a vector space on probabilistic atlases ».
Medical Image Analysis, vol. 11, nº 5.
pp. 465-477.
Prokoshkin, S., Brailovski, Vladimir, Inaekyan, K., Demers, V., Khmelevskaya, I., Dobatkin, S. and Tatyanin, E..
2007.
« Severely cold-rolled and annealed Ti-Ni shape memory alloys : structure, transformations and functional properties ».
In Proceedings of the International Symposium Bulk Nanostructured Materials (BNM) (Ufa, Russia, Aug. 14-18, 2007)
pp. 282-283.
Ramdane-Cherif, Amar, Djenidi, H. and Tadj, Chakib.
2007.
« Adaptive multimodal architectures ».
In 16th International Conference on Computing (ICC) (Mexico City, Mexico, Nov. 4-9, 2007)
IEEE Computer Society.
Reuter, Martin, Niethammer, Marc, Wolter, Franz-Erich, Bouix, Sylvain and Shenton, Martha.
2007.
« Global medical shape analysis using the volumetric Laplace spectrum ».
In International Conference on Cyberworlds (CW'07) (Hannover, Germany, Oct. 24-26, 2007)
pp. 417-426.
IEEE.
Ribeiro, R., Koerich L., Alessandro and Enembreck, F..
2007.
« Reinforcement learning: adaptive agents for discovery of policies of action ».
Agora. Revista de Divulgaçao Cientifica, vol. 14, nº 1.
pp. 9-24.
Ribeiro, R., Koerich, A. L. and Enembreck, F..
2007.
« Noise tolerance in reinforcement learning algorithms ».
In IEEE/WIC/ACM International Conference on Intelligent Agent Technology, 2007. IAT '07 (Fremont, CA, USA, Nov. 2-5, 2007)
pp. 265-268.
Roth, Simon-Nicolas and Soulaïmani, Azzeddine.
2007.
« A revisited full potential method for application in fast and accurate computational aeroelasticity ».
In Aero Conference and 54th Annual General Meeting (Toronto, ON, Canada, Apr. 25-26, 2007)
Canadian Aeronautics and Space Institute.
Ruelland, François and Al-Haddad, Kamal.
2007.
« Reducing subway's energy ».
In IEEE Canada Electrical Power Conference (EPC) (Montréal, QC, Canada, Oct. 25-26, 2007)
pp. 261-267.
IEEE Canada.
Safizadeh, Mir Saeed, Lakis, A. A. and Thomas, Marc.
2007.
« Machinery diagnosis by wavelet analysis ».
In Congress theme: machinery & process health monitoring - future trends and prospects : proceedings of the 20th International Congress on Condition Monitoring and Diagnostic Engineering Management ; Faro, Portugal, June 13 - 15, 2007 ; COMADEM 2007 (Faro, Portugal, June 13-15, 2006)
pp. 417-424.
Coimbra Inst. de Telecomunicações.
Salah, B. and Chatelain, Jean-François.
2007.
« Part localization based on a surface patch alignment algorithm ».
In 2e Congrès International en Conception et Modélisation des Systèmes Mécaniques (CMSM) (Monastir, Tunisia, Mar. 19-21, 2007)
Silla Jr., C. N., Kaestner, C. A. A. and Koerich, A. L..
2007.
« The latin music database: uma base de dados para a classificaçao automatica de generos musicais ».
In SBCM 2007 Proceedings (São Paulo, Brazil, Sept. 1-3, 2007)
pp. 167-174.
Silla, C. N., Kaestner, C. A. A. and Koerich, A. L..
2007.
« Automatic music genre classification using ensemble of classifiers ».
In IEEE International Conference on Systems, Man and Cybernetics, 2007. ISIC (Montreal, QC, Canada, Oct. 7-10, 2007)
pp. 1687-1692.
Silva, Paulo F., Westphall, Carlos B., Westphall, Carla M. and Dias de Assuncao, Marcos.
2007.
« Design and evaluation of a grid computing based architecture for integrating heterogeneous IDSs ».
In 50th Annual IEEE Global Telecommunications Conference (GLOBECOM) (Washington, DC, USA, Nov. 26-30, 2007)
pp. 338-342.
Institute of Electrical and Electronics Engineers Inc..
Songmene, Victor, Masounave, Jacques and Khettabi, R..
2007.
« Dry machining and its effects on productivity, costs, environment and machine-shop air quality ».
In 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
pp. 51-60.
Songmene, Victor, Masounave, Jacques and Khettabi, R..
2007.
« Safe, environmentally-friendly and cost effective machining ».
In Safety Health and Environmental World Congress (SHEWC) (Santos, Brazil, July 22-25, 2007)
pp. 44-48.
Souza, F. R. and Melhado, S. B..
2007.
« A importância do sistema de informação para a gestão das empresas de projeto ».
In Anais do VII Workshop Brasileiro de Gestão do Processo de Projeto na Construção de Edifícios (Curitiba, Brazil, Dec. 06-07, 2007)
CESEC-UFPR.
Souza, F. R., Oliveira, O. J. and Melhado, S. B..
2007.
« Análise do comportamento de empresas de projeto na fase de implementação de modelo de gestão durante o programa de desenvolvimento gerencial de empresas de projeto ».
In Anais do V SIBRAGEC - Simpósio Brasileiro de Gestão e Economia da Construção (Campinas, Brazil
UNICAMP.
Souza, Flavia, Oliveira, Otavio J. and Melhado, Silvio B..
2007.
« Model of management for design firms - analysis of the phase of implementation of the modules during the “capacity program of design firms” ».
In Proceeditns of the 18th Annual Conference of the Production and Operations Management Society (Dallas, TX, USA, May 04-07, 2007)
Production & Operations Management Society. Südhoff, I., de Guise, Jacques A., Fuentes, A. and Skalli, W.. 2007. « Combining stereoradiography and gait analysis to determine the centre of the femoral head : impact on kinetics ». Communication lors de la conférence : 16th annual meeting of ESMAC (Athens, Greece, Sept. 24-29, 2007). Südhoff, I., Parent, G., Fuentes, A., Goujon, H., Poignard, A., Bonnet, X., de Guise, Jacques A. and Skalli, W.. 2007. « Intégration de la géométrie osseuse personnalisée à l'analyse du mouvement ». Communication lors de la conférence : 6e Journée du Groupe d'Analyse du Mouvement chez l'Enfant et l'Adulte (GAMEA) (Bruxelles, Belgique, 8-9 fév. 2007).
Südhoff, I., Skalli, W., Fuentes, A. and de Guise, J. A..
2007.
« A patient specific model for gait analysis ».
[Conference paper summary]. Journal of Biomechanics, vol. 40, nº S2.
S346. Südhoff, I., Skalli, W., Fuentes, A. and de Guise, Jacques A.. 2007. « A patient specific model for gait analysis ». Communication lors de la conférence : XXIth Congress of the International Society of Biomechanics (ISB) (Taipei, Taiwan, July 1-5, 2007).
Sun, Shuhui, Meng, Guowen, Zhang, Gaixia, Masse, Jean-Philippe and Zhang, Lide.
2007.
« Controlled growth of SnO2 hierarchical nanostructures by a multistep thermal vapor deposition process ».
Chemistry - A European Journal, vol. 13, nº 32.
pp. 9087-9092.
Sun, Shuhui, Meng, Guowen, Zhang, Gaixia and Zhang, Lide.
2007.
« Controlled growth and optical properties of one-dimensional ZnO nanostructures on SnO2 nanobelts ».
Crystal Growth and Design, vol. 7, nº 10.
pp. 1988-1991.
Sun, Shuhui, Yang, Dequan, Zhang, Gaixia, Sacher, Edward and Dodelet, Jean-Pol.
2007.
« Synthesis and characterization of platinum nanowire-carbon nanotube heterostructures ».
Chemistry of Materials, vol. 19, nº 26.
pp. 6376-6378.
Suryn, Witold.
2007.
« Maturity and economic ramification of software quality engineering ».
In Software Quality Management XV : software quality in the knowledge society (Strafford, UK, Apr. 2-4, 2007)
pp. 95-105.
British Computer Society.
Suryn, Witold.
2007.
« Quality engineering for embedded systems : a tight challenge ».
In 1st China International Forum on Embedded Software and Systems (Beijing, China, Nov. 11, 2007)
Suryn, Witold.
2007.
« Software quality design - the engineering perspective ».
In Software Quality Management XV : software quality in the knowledge society (Stafford, UK, Apr. 2-4, 2007)
pp. 67-76.
British Computer Society.
Suryn, Witold.
2007.
« The applicability of ISO 9126-2 external software qualtity measures in context of quality in use predictability ».
In Software Quality Management XV : software quality in the knowledge society (Strafford, UK, Apr. 2-4, 2007)
pp. 117-131.
British Computer Society.
Suryn, Witold and Laverdière, Francis.
2007.
« The applicability analysis of ISO/IEC 9126 series of standards in telecom sector : The example of softswitch category of software ».
[Conference paper]. Software Quality Journal, vol. 15, nº 4.
pp. 417-448.
Suryn, Witold and Ross, Margaret.
2007.
« Applying guide to SWEBOK as the scope framework in software engineering education ».
In 12th Annual International conference for Process Improvement, Research and Education (INSPIRE) (Stafford, UK, Aug. 1-2, 2007)
Szymanski, A., Masounave, J. and Viens, M..
2007.
« Les différentes sources d’émission de particules fines et ultrafines dans l’air ».
In Premier congrès international sur l'ingénierie des risques industriels : CIRI 2007 : Montréal (Québec) Canada, 17-18 et 19 décembre 2007 : actes (Montréal, QC, Canada, 17-19 déc. 2007)
Montréal : École de technologie supérieure.
Talib, Manar Abu, Khelifi, Adel, Abran, Alain and Ormandjieva, Olga.
2007.
« A case-study using the COSMIC-FFP measurement method for assessing real-time systems specifications ».
In Proceedings of the IWSM - Mensura 2007 (Baleares, Spain, Nov. 5-9, 2007)
pp. 132-141.
UIB-Universitat de les Illes Baleares.
Tan, Ing H., Ueda, Mario, Dallaqua, Renato S., Demarquette, Nicole R. and Gengembre, Leon.
2007.
« Magnesium implantation by plasma immersion in polymers for oxidation protection in low earth orbit environment ».
[Conference paper]. Plasma Processes and Polymers, vol. 4, nº S1.
S1081-S1085.
Terriault, Patrick, Torra, V., Fischer, C., Brailovski, Vladimir and Isalgue, A..
2007.
« Superelastic shape memory alloy damper equipped with a passive adaptable pre-straining mechanism ».
In 9th Canadian Conference on Earthquake Engineering (CCEE) (Ottawa, ON, Canada, June 26-29, 2007)
pp. 1489-1496.
Toews, M. and Arbel, T..
2007.
« A statistical parts-based model of anatomical variability ».
IEEE Transactions on Medical Imaging, vol. 26, nº 4.
pp. 497-508.
Toews, Matthew and Arbel, Tal.
2007.
« Detecting and localizing 3D object classes using viewpoint invariant reference frames ».
In IEEE 11th International Conference on Computer Vision, 2007. ICCV 2007 (Rio de Janeiro, Brazil, Oct. 14-21, 2007)
pp. 1-8.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Inc..
Toews, Matthew and Arbel, Tal.
2007.
« Detecting, localizing and classifying visual traits from arbitrary viewpoints using probabilistic local feature modeling ».
In Analysis and modeling of faces and gestures : Third International Workshop, AMFG 2007 Rio de Janeiro, Brazil, October 20, 2007 Proceedings (Rio de Janeiro, Brazil, Oct. 20, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4778.
pp. 154-167.
Springer Berlin Heidelberg. Tremblay, Christine. 2007. « Filterless optical networking ». Communication lors de la conférence : AAPN Annual Research Review (Ottawa, ON, Canada, June 15, 2007).
Tremblay, Christine, Gagnon, François, Châtelain, Benoît, Bernier, Éric and Bélanger, Michel.
2007.
« Filterless optical networks : a unique and novel passive WAN network solution ».
In 12th OptoElectronic and Communications Conference (OECC)/ 16th International Conference on Integrated Optics and Optical Fiber Communication (OECC/IOOC'07) (Yokohama, Japan, July 9-13, 2007)
Tremblay, Olivier, Dessaint, Louis-A. and Dekkiche, Abdel-Illah.
2007.
« A generic battery model for the dynamic simulation of hybrid electric vehicles ».
In IEEE Vehicle Power and Propulsion Conference (VPPC) (Arlington, TX, USA, Sept. 09-12, 2007)
pp. 284-289.
IEEE.
Valle, J. D., Oliveira, L. E. S., Koerich, A. L. and Britto, A. S..
2007.
« People counting in low density video sequences ».
In Advances in Image and Video Technology : Second Pacific Rim Symposium, PSIVT 2007 Santiago, Chile, December 17-19, 2007 Proceedings (Santiago, Chile, Dec. 17-19, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4872.
pp. 737-748.
Springer Berlin Heidelberg.
Van Bang, D. P., Ovarlez, G. and Tocquer, L..
2007.
« Effets de la densité et de la structuration sur les caractéristiques rhéologiques de la vase ».
Houille Blanche, vol. 93, nº 2.
pp. 85-93. Van Geel, P., Catley, A. and Samson, C.. 2007. « Landfill moisture detection and monitoring ». Communication lors de la conférence : Landfill symposium, Annual meeting of the Ontario Waste Management Association (Kitchener, ON, Canada, Nov. 07-08, 2007).
Vo, P., Jahazi, M. and Yue, S..
2007.
« Recrystallization during Alpha + Beta Processing of IMI834 ».
In Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 1-5, 2007)
pp. 267-270.
Warrendale, PA, USA : Minerals, Metals and Materials Society.
Vo, P., Jahazi, M. and Yue, S..
2007.
« Recrystallization during beta working of IMI834 ».
In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006)
Coll. « Advanced Materials Research »
pp. 965-969.
Vancouver, BC, Canada : Trans Tech Publications.
Vu, V. H., Thomas, M. and Lakis, A. A..
2007.
« Le pont est-il fort? réponse d'une technique d'analyse modale opérationalle ».
In 42e congrès AQTR : défi : transport durable, 2 au 4 avril 2007 - Montréal : recueil des communications (Montreal, QC, Canada, Apr. 2-4, 2007)
Montréal, Canada : AQTR.
Vu, V. H., Thomas, M., Lakis, A. A. and Marcouiller, L..
2007.
« Identification of added mass on submergeg vibrated plates ».
In 25th Seminar on Machinery Vibration (Saint John, NL, Canada, Oct. 24-26, 2007)
40.41-40.15.
Calgary, AB, Canada : CMVA.
Vu, V. H., Thomas, M., Lakis, A. A. and Marcouiller, L..
2007.
« Identification of modal parameters by operational modal analysis of the assessment of bridge rehabilitation ».
In 2nd International Operational Modal Analysis Conference (IOMAC 2007) (Copenhaguen, Denmark, Apr. 30-May 2, 2007)
pp. 111-120.
Aalborg · Denmark : Aalborg University.
Vu, V. H., Thomas, M., Lakis, A. A. and Marcouiller, L..
2007.
« Multi-regressive model for structural output only modal analysis ».
In 25th Seminar on Machinery Vibration (Saint John, NL, Canada, Oct. 24-26, 2007)
41.41-41.20.
Calgary, Canada : CMVA.
Wang, X., Vo, P., Jahazi, M. and Yue, S..
2007.
« Dwell fatigue microstructure in a near-α titanium alloy ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 38, nº 4.
pp. 831-839.
Wanjara, P., Brochu, M. and Jahazi, M..
2007.
« Electron beam freeform fabrication on stainless steel ».
In THERMEC 2006 (Vancouver, B.C, Canada, July 4-8, 2006)
Coll. « Materials Science Forum », vol. 539-543.
pp. 4938-4943.
Trans Tech Publications.
Wanjara, P., Brochu, M. and Jahazi, M..
2007.
« Electron beam freeforming of stainless steel using solid wire feed ».
Materials and Design, vol. 28, nº 8.
pp. 2278-2286.
Weiss, Julien and Chokani, Ndaona.
2007.
« Effect of freestream noise on shock-wave/turbulent-boundary layer interactions ».
AIAA Journal, vol. 45, nº 9.
pp. 2352-2355. Weston, G., Samson, C., Boteler, D., Trichtchenko, L. and Raymond, D.. 2007. « The effect of telluric currents on water mains ». Communication lors de la conférence : NACE (The International Corrosion Society) Northern Area Eastern Conference (Ottawa, ON, Canada, Sept. 24-26, 2007).
Woodward, L., Srinivasan, B., Robitaille, B. and Perrier, M..
2007.
« Real-time optimization of an off-gas distribution system of an iron and titanium plant ».
Computers and Chemical Engineering, vol. 31, nº 4.
pp. 384-389.
Woodward, Lyne, De Crescenzo, Gregory and Srinivasan, Bala.
2007.
« Optimization of experiments for improved estimation of protein interaction parameters ».
[Conference paper]. IFAC Proceedings Volumes, vol. 40, nº 4.
pp. 109-114.
Woodward, Lyne, Perrier, Michel and Srinivasan, Bala.
2007.
« Convergence of multi-unit optimization with non-identical units : application to the optimization of a bioreactor ».
[Conference paper]. IFAC Proceedings Volumes, vol. 40, nº 12.
pp. 751-756.
Woodward, Lyne, Perrier, Michel and Srinivasan, Bala.
2007.
« Multi-unit optimization with gradient projection on active constraints ».
[Conference paper]. IFAC Proceedings Volumes, vol. 40, nº 5.
pp. 129-134.
Xiao, M., Poon, C., Wanjara, P., Jahazi, M., Fawaz, Z. and Krimbalis, P..
2007.
« Optimization of Nd-YAG laser welding process for Inconel 718 alloy ».
In Progress in Light Metals, Aerospace Materials and Superconductors (Beijing, China, June 25-30, 2006)
Coll. « Materials Science Forum », vol. 546-549.
pp. 1305-1308.
Trans Tech Publications.
Xinjin, Cao, Min, Xiao, Jahazi, M. and Shariff, T..
2007.
« Evolution of microstructures during laser surface cladding of magnesium alloy castings using welding wire ».
In THERMEC 2006 - Proceedings of the 5th International Conference on Processing and Manufacturing of Advanced Materials
Coll. « Materials Science Forum »
pp. 1735-1740.
Switzerland : Trans Tech Publications.
Yee, Márcio, Calvão, Patrícia S. and Demarquette, Nicole R..
2007.
« Rheological behavior of poly(methyl methacrylate)/polystyrene (PMMA/PS) blends with the addition of PMMA-ran-PS ».
Rheologica Acta, vol. 46, nº 5.
pp. 653-664.
Yeste-Ojeda, Omar A. and Grajal, Jesus.
2007.
« Limitations of spectral correlation based detectors ».
In IEEE/SP 14th Workshop on Statistical Signal Processing, 2007. SSP '07 (Madison, WI, USA, Aug. 26-29, 2007)
pp. 244-248.
IEEE.
Zaghbani, Imed, Songmene, Victor and Khettabi, R..
2007.
« A simplified numerical model for orthogonal cutting ».
In 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
pp. 152-157.
Zaghbani, Imed, Songmene, Victor and Khettabi, R..
2007.
« Modeling of thin wall-parts deflection during high speed milling ».
In 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
pp. 111-115.
Zarour, Mohammad, Desharnais, Jean-Marc and Abran, Alain.
2007.
« A framework to compare software process assessment methods dedicated to small and very small organizations ».
In International Conference on Software Quality ICSQ 2007. Proceedings (Denver, CO, USA, Oct. 16-17, 2007)
ASQ. Zednik, R. J. and McIntyre, P. C.. 2007. « Biaxial stress-induced domain wall motion at room temperature in polycrystalline lead zirconium titanate thin films ». Communication lors de la conférence : Spring MRS Meeting (San Francisco, CA, USA, Apr. 09-13, 2007). Zednik, R. J., McIntyre, P. C., Baniecki, J. D., Ishii, M., Kurihara, K. and Yamanaka, K.. 2007. « Relaxor-like dielectric behavior and universal relaxation law in Ba0.7Sr0.3TiO3 thin-films ». Communication lors de la conférence : Japan Society of Applied Physics (Hokkaido, Japan). Zednik, Ricardo. 2007. « Effects on switching behavior of PZT films ». Communication lors de la conférence : Non-Volatile Memory Technology Rsearch Initiative : Review Meeting (Stanford, CA, USA, May 18, 2007).
Zednik, Ricardo J., McIntyre, Paul C., Baniecki, John D., Ishii, Masatoshi, Shioga, Takeshi and Kurihara, Kazuaki.
2007.
« Relaxorlike dielectric behavior in Ba0.7Sr0.3TiO 3 thin films ».
Journal of Applied Physics, vol. 101, nº 6.
Zednik, Ricardo and McIntyre, Paul. 2007. « Biaxial stress-induced domain wall motion at room temperature in polycrystalline lead zirconium titanate thin films ». Affiche numéro C1.00259 présentée lors de la conférence : 2007 APS March Meeting (Denver, CO, USA, Mar. 05-09, 2007). Zednik, Ricardo, McIntyre, Paul, Baniecki, John, Ishii, Masatoshi, Kurihara, Kazuaki and Yamanaka, Kazunori. 2007. « Effect of stress on dielectric loss behavior in Ba0.7Sr0.3TiO3 thin-films ». Communication lors de la conférence : 2007 APS March Meeting (Denver, CO, USA, March 5-9, 2007).
Zhang, Gaixia, Yang, Dequan and Sacher, Edward.
2007.
« Structure and morphology of Co nanoparticles deposited onto highly oriented pyrolytic graphite ».
Journal of Physical Chemistry C, vol. 111, nº 46.
pp. 17200-17205.
Zhang, Gaixia, Yang, Dequan and Sacher, Edward.
2007.
« X-ray photoelectron spectroscopic analysis of Pt nanoparticles on highly oriented pyrolytic graphite, using symmetric component line shapes ».
Journal of Physical Chemistry C, vol. 111, nº 2.
pp. 565-570.
Zhang, Jinfang, Dziong, Zbigniew, Gagnon, François and Kadoch, Michel.
2007.
« Multiuser detection based MAC design for Ad Hoc networks ».
In Fourth International Conference on Heterogeneous Networking for Quality, Reliability, Security and Robustness (Vancouver, BC, Canada, Aug. 14-17, 2007)
New York, NY, USA : ACM.
Zhang, Jinfang, Dziong, Zbigniew, Gagnon, François and Kadoch, Michel.
2007.
« Multiuser detection based MAC design for Ad Hoc networks ».
In International Workshop on Wireless and Sensor Networks (WSNET) (Xian, China, Sept. 10-14, 2007)
|
![[up]](/style/images/multi_up.png)
Up a level