| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
L'affiliation est "Génie mécanique"Nombre de documents archivés : 382.
Abattan, Spéro, Hallé, Stéphane, Drolet, Daniel, Bahloul, Ali, Ryan, Patrick Eddy, Chouchene, Wejden, Castro Ruiz, Carlos, Lavoué, Jérôme et Debia, Maximilien.
2019.
« Amélioration de la justesse des modèles d’hygiène du travail utilisés pour estimer des expositions professionnelles à des vapeurs de solvants ».
Coll. « Rapports scientifiques », vol. R-1077.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 73 p.
Abbad, Ahmed, Atalla, Noureddine, Ouisse, Morvan et Doutres, Olivier.
2019.
« Numerical and experimental investigations on the acoustic performances of membraned Helmholtz resonators embedded in a porous matrix ».
Journal of Sound and Vibration, vol. 459.
Abdedou, Azzedine et Soulaimani, Azzeddine.
2019.
« A non-intrusive B-splines Bézier elements-based method for uncertainty propagation ».
Computer Methods in Applied Mechanics and Engineering, vol. 345.
pp. 774-804.
Adoungotchodo, Atma, Alinejad, Yasaman, Grant, Michael, Epure, Laura M., Antoniou, John, Mwale, Fackson et Lerouge, Sophie.
22 janvier 2019.
« Des hydrogels de chitosane pour régénérer les disques intervertébraux ».
[Article de recherche]. Substance ÉTS.
Adoungotchodo, Atma, Alinejad, Yasaman, Grant, Michael, Epure, Laura M., Antoniou, John, Mwale, Fackson et Lerouge, Sophie.
22 janvier 2019.
« Regenerating Intervertebral Discs with Chitosan Hydrogels ».
[Article de recherche]. Substance ÉTS.
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2019.
« Tool condition monitoring method in milling process using wavelet transform and long short-term memory ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 153-161.
INSA.
Ahmadabadi, Z. Nili, Guilbault, Raynald et Laville, Frédéric.
2019.
« Nonlinear dynamic modeling of pneumatic nailing devices ».
Mathematical and Computer Modelling of Dynamical Systems, vol. 25, nº 2.
pp. 195-223.
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., Songmene, V. et Brochu, M..
2019.
« Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel ».
International Journal of Advanced Manufacturing Technology, vol. 104, nº 1-4.
pp. 141-157.
Al Sayed, Chady, Vinches, Ludwig, Dupuy, Olivier, Douzi, Wafa, Dugue, Benoit et Hallé, Stéphane.
2019.
« Air/CO2 cooling garment: description and benefits of use for subjects exposed to a hot and humid climate during physical activities ».
International Journal of Mining Science and Technology, vol. 29, nº 6.
pp. 899-903.
Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane.
2019.
« Novel portable cooling system for hot and humid environments using atmospheric discharge of high-pressure carbon dioxide ».
Thermal Science and Engineering Progress, vol. 11.
pp. 1-7.
Al-Hashedi, Ashwaq A., Laurenti, Marco, Amine Mezour, Mohamed, Basiri, Tayebeh, Touazine, Heithem, Jahazi, Mohamed et Tamimi, Faleh.
2019.
« Advanced inorganic nanocomposite for decontaminating titanium dental implants ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 107, nº 3.
pp. 761-772.
Alinejad, Yasaman, Adoungotchodo, Atma, Grant, Michael P., Epure, Laura M., Antoniou, John, Mwale, Fackson et Lerouge, Sophie.
2019.
« Injectable chitosan hydrogels with enhanced mechanical properties for nucleus pulposus regeneration ».
Tissue Engineering Part A, vol. 25, nº 5-6.
pp. 303-313.
Alqudsi, Alhaytham, Ghunem, Refat Atef et David, Eric.
2019.
« The role of nano-sized alumina tri-hydrate and fumed silica on the erosion of silicone rubber under DC voltage ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Richland, WA, USA, Oct. 20-23, 2019)
pp. 733-736.
IEEE.
Alzidani, Mahmoud et Dao, Thien-My.
2019.
« Optimization of the cellular manufacturing scheduling using the RC-filter and EGD hybrid Meta-heuristics Approach ».
International Journal on Interactive Design and Manufacturing, vol. 13, nº 4.
pp. 1549-1556.
Arfaoui, Mohamed Ameur, Dolez, Patricia I., Dubé, Martine et David, Éric.
2019.
« Preparation of a hydrophobic recycled jute-based nonwoven using a titanium dioxide/stearic acid coating ».
Journal of the Textile Institute, vol. 110, nº 1.
pp. 16-25.
Arteau, Jean.
2019.
« Lessons from 35 years of PPE selection, evaluation, design and standardization ».
In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65.
Dortmund : GfA-Press.
Arteau, Jean, Beauchamp, Yves, Lajoie, Olivier et Labranche, Laetitia.
2019.
« Rebar installers’ fall arrest systems: part 1, belt vs harness and the selection of the harness (PPE) ».
In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65.
Dortmund : GfA-Press.
Arteau, Jean, Beauchamp, Yves, Lajoie, Olivier et Labranche, Laetitia.
2019.
« Rebar installers’ fall arrest systems: part 2, the selection of the connecting link and the attachment point ».
In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65.
Dortmund : GfA-Press.
Aveline, V. et Rousse, D. R..
2019.
« Modélisation numérique des bilans thermique et hydrique d'un poulailler avec échangeurs de chaleur en climat nordique ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Aveline, Victor et Rousse, Daniel R..
16 octobre 2019.
« De l’efficacité énergétique pour les poulaillers au Québec ».
[Article de recherche]. Substance ÉTS.
Aveline, Victor et Rousse, Daniel R..
16 octobre 2019.
« Energy Efficiency for Poultry Shelters in Québec ».
[Article de recherche]. Substance ÉTS.
Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim.
2019.
« Evaluation of interfacial and permeation leaks in gaskets and compression packing ».
Journal of Nuclear Engineering and Radiation Science, vol. 5, nº 1.
Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim.
2019.
« Prediction of liquid and gas leak rates in packed stuffing boxes ».
In ASME 2019 Pressure Vessels and Piping Conference, PVP 2019 (San Antonio, TX, USA, July 14-19, 2019)
American Society of Mechanical Engineers (ASME).
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Kazeminia, Mehdi.
2019.
« Predicting leak rate through valve stem packing in nuclear applications ».
Journal of Nuclear Engineering and Radiation Science, vol. 5, nº 1.
Azizi, Sohrab, David, Eric, Fréchette, Michel F., Nguyen-Tri, Phuong et Ouellet-Plamondon, Claudiane M..
2019.
« Electrical and thermal phenomena in low-density polyethylene/carbon black composites near the percolation threshold ».
Journal of Applied Polymer Science, vol. 136, nº 6.
Azizi, Sohrab, David, Eric, Frechette, Michel F. et Ouellet-Plamondon, Claudiane M..
2019.
« Numerical simulation of the effective permittivity of low-density polyethylene composite filled by carbon black ».
IET Nanodielectrics, vol. 2, nº 4.
pp. 129-134.
Azizi, Sohrab, David, Éric, Fréchette, Michel, Nguyen-Tri, Phuong et Ouellet-Plamondon, Claudiane.
29 janvier 2019.
« Des câbles haute tension améliorés grâce aux composites conducteurs ».
[Article de recherche]. Substance ÉTS.
Azizi, Sohrab, David, Éric, Fréchette, Michel, Nguyen-Tri, Phuong et Ouellet-Plamondon, Claudiane.
29 janvier 2019.
« Improving High Voltage Cables Using LDPE/CB Conductive Composites ».
[Article de recherche]. Substance ÉTS.
Azizi, Sohrab, Ouellet-Plamondon, Claudiane, Tri, Phuong Nguyen, Fréchette, Michel et David, Eric.
2019.
« Electrical, thermal and rheological properties of low-density polyethylene/ethylene vinyl acetate/graphene-like composite ».
Composites Part B: Engineering, vol. 177.
Babanezhad, Kaveh, Foucault, Gilles, Sabri, Vahid, Tahan, Antoine et Bigeon, Jean.
2019.
« The fixtureless inspection of flexible parts based on semi-geodesic distance ».
Precision Engineering, vol. 59.
pp. 174-184.
Bag, Amrita, Delbergue, Dorian, Bocher, Philippe, Lévesque, Martin et Brochu, Myriam.
2019.
« Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel ».
International Journal of Fatigue, vol. 118.
pp. 126-138.
Bahloul, Ali, Djebara, Abdelhakim, Saidi, Mohamed Nejib, Songmene, Victor, Villalpando, Fernando et Reggio, Marcelo.
2019.
« Computational and experimental analysis of ultrafine particle dispersion during granite polishing ».
Aerosol Science and Engineering, vol. 3, nº 1.
pp. 21-31.
Bahloul, Ali, Jorge Vanterpool, Rafael Francisco, Djebara, Abdelhakim, Songmene, Victor, Said, Mohamed Nejib, Kouam, Jules, Reggio, Marcelo et Villalpando, Fernando.
2019.
« Transformation du granit : Caractérisation et contrôle de la poussière de la silice émise par le polissage ».
Coll. « Rapports scientifiques », vol. R-1054.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 99 p. Bajgholi, Mohammad Ebrahim et Viens, Martin. 2019. « Evaluation of the dead zones in the welded joints of hydraulic turbine runners ». Communication lors de la conférence : NDT in Canada 2019 (Edmonton, AB, Canada, June 18-20, 2019).
Batista, Natassia L., Helal, Emna, Kurusu, Rafael S., Moghimian, Nima, David, Eric, Demarquette, Nicole R. et Hubert, Pascal.
2019.
« Mass-produced graphene—HDPE nanocomposites: Thermal, rheological, electrical, and mechanical properties ».
Polymer Engineering and Science, vol. 59, nº 4.
pp. 675-682.
Beausejour, M. H., Petit, Y., Arnoux, P. J. et Wagnac, E..
2019.
« Comparison of two intervertebral disc failure models in a numerical C4-C5 trauma model ».
In 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (Berlin, Germany, July 23-27, 2019)
pp. 5415-5418.
New York : IEEE. Beauséjour, Marie-Hélène, Petit, Yvan, Arnoux, Jean-Pierre et Wagnac, Éric. 2019. « Numerical modeling of intervertebral disc failure during hyperflexion and hyperflexion-compression ». Communication lors de la conférence : 16th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 4th Conference on Imaging and Visualization (CMBBE) (New York City, NY, USA, Aug. 14-16, 2019).
Belanger, Pierre et Jahazi, Mohammad.
2019.
« Friction stir welded lap joint inspection using ultrasonic guided waves ».
In 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018)
Coll. « AIP Conference Proceedings », vol. 2102.
USA : AIP Publishing.
Ben Amor, Sabrine, Abdellaoui, Salah, Tahan, Antoine, Louhichi, Borhen et Tavares, João Manuel R. S..
2019.
« Choosing the best direction of printing for additive manufacturing process in medical applications using a new geometric complexity model based on part CAD data ».
In VipIMAGE : Proceedings of the VII ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (Porto, Portugal, Oct. 16-18, 2019)
Coll. « Lecture Notes in Computational Vision and Biomechanics », vol. 34.
pp. 679-692.
Springer Netherlands.
BEN Amor, Sabrine, Tahan, Antoine et Louhichi, Borhen.
2019.
« Proposition of a geometric complexity model for additive manufacturing process based on CAD ».
In 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019)
pp. 442-448.
Los Alamitos, CA, USA : IEEE Computer Society.
Ben Trad, Mohamed Aziz, Demers, Vincent et Dufresne, Louis.
2019.
« Effect of powder shape and size on rheological, thermal, and segregation properties of low-pressure powder injection molding feedstocks ».
Journal of Materials Engineering and Performance, vol. 28, nº 9.
pp. 5551-5562.
Benacchio, Simon, Doutres, Olivier, Varoquaux, Arthur, Wagnac, Éric, Le Troter, Arnaud, Callot, Virginie et Sgard, Franck.
2019.
« Use of magnetic resonance image registration to estimate displacement in the human earcanal due to the insertion of in-ear devices ».
Journal of the Acoustical Society of America, vol. 146, nº 4.
pp. 2452-2465.
Benacchio, Simon, Poissenot-Arrigoni, Bastien, Martin, Laurence, Saint Gaudens, Hugo, Sgard, Franck et Doutres, Olivier.
2019.
« An artificial ear to assess objective indicators related to the acoustical comfort dimension of earplugs: comparison with attenuation and occlusion effect measured on subject ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Benadda, Mohamed, Bouzidane, Ahmed, Thomas, Marc et Guilbault, Raynald.
2019.
« Dynamic behavior analysis of a rigid rotor supported by hydrostatic squeeze film dampers compensated with new electrorheological valve restrictors ».
Industrial Lubrication and Tribology, vol. 72, nº 5.
pp. 611-619.
Benariba, Aboubakeur, Bouzidane, Ahmed et Thomas, Marc.
2019.
« Analytical analysis of a rigid rotor mounted on three hydrostatic pads lubricated with micropolar fluids ».
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 233, nº 6.
pp. 859-869.
Benchaabane, Youssef, Silva, Rosa Elvira, Ibrahim, Hussein, Ilinca, Adrian, Chandra, Ambrish et Rousse, Daniel R..
2019.
« Computer model for financial, environmental and risk analysis of a wind-diesel hybrid system with compressed air energy storage ».
Energies, vol. 12, nº 21.
Bensalem, Hachem, Blaquière, Yves et Savaria, Yvon.
2019.
« Toward in-system monitoring of OpenCL-based designs on FPGA ».
In IEEE International Symposium on Circuits and Systems (ISCAS) (Sapporo, Japan, May 26-29, 2019)
Institute of Electrical and Electronics Engineers Inc.. Bernier, Antoine et Voix, Jérémie (inventeurs) 26 mars 2019. « Active hearing protection device and method therefore ». EERS Global Technologies Inc. (titulaire(s)). Brevet américain US 10,238,546.
Bertrand, Rémi, Robe, Hugo, Texier, Damien, Zedan, Yasser, Feulvarch, Eric et Bocher, Philippe.
2019.
« Analysis of AA2XXX/AA7XXX friction stir welds ».
Journal of Materials Processing Technology, vol. 271.
pp. 312-324.
Bianchetti, C., Delbergue, D., Bocher, Philippe, Levesque, M. et Brochu, M..
2019.
« Analytical fatigue life prediction of shot peened AA 7050-T7451 ».
International Journal of Fatigue, vol. 118.
pp. 271-281.
Blancke, Olivier, Combette, Amélie, Amyot, Normand, Komljenovic, Dragan, Lévesque, Mélanie, Hudon, Claude, Tahan, Antoine et Zerhouni, Noureddine.
2019.
« A predictive maintenance approach for complex equipment based on a failure mechanism propagation model ».
International Journal of Prognostics and Health Management, vol. 10, nº 1.
Boanta, C., Lessard, F., Laberge-Lebel, L., Dubé, M. et Robert, É..
2019.
« Impact of cellulose filaments on interlaminar properties, flammability and thermal degradation behaviour of polymer matrix composites ».
In ICCM22 : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2020)
pp. 1299-1310.
Melbourne, VIC : Engineers Australia.
Bohlooli Arkhazloo, Nima, Bouissa, Yassine, Bazdidi-Tehrani, Farzad, Jadidi, Mohammad, Morin, Jean-Benoit et Jahazi, Mohammad.
2019.
« Experimental and unsteady CFD analyses of the heating process of large size forgings in a gas-fired furnace ».
Case Studies in Thermal Engineering, vol. 14.
Bonnet, Fabien, Nelisse, Hugues, Nogarolli, Marcos A. C. et Voix, Jérémie.
2019.
« An in-ear noise dosimetry method that excludes the sounds generated by individuals wearing earplugs: preliminary field study ».
In 26th International Congress on Sound and Vibration (ICSV) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Bonnet, Fabien, Nélisse, Hugues, Nogarolli, Marcos A. C. et Voix, Jérémie.
2019.
« In-ear noise dosimetry under earplug: Method to exclude wearer-induced disturbances ».
International Journal of Industrial Ergonomics, vol. 74.
pp. 139-148.
Bonnet, Fabien, Nélisse, Hugues, Nogarolli, Marcos A.C. et Voix, Jérémie.
2019.
« An in ear noise dosimetry method that excludes the sounds generated by individuals wearing earplugs: Preliminary field study ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Bouchet, Mélusine, Gauthier, Matthieu, Maire, Marion, Ajji, Abdellah et Lerouge, Sophie.
2019.
« Towards compliant small-diameter vascular grafts: predictive analytical model and experiments ».
Materials Science and Engineering: C, vol. 100.
pp. 715-723.
Bouissa, Yassine, Shahriari, Davood, Champliaud, Henri et Jahazi, Mohammad.
2019.
« Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ».
Case Studies in Thermal Engineering, vol. 13.
Bouland, C., Urlea, V., Beaubier, K., Samoilenko, M. et Brailovski, V..
2019.
« Abrasive flow machining of laser powder bed-fused parts: numerical modeling and experimental validation ».
Journal of Materials Processing Technology, vol. 273.
Bouserhal, Rachel E., Bernier, Antoine et Voix, Jérémie.
2019.
« An in-ear speech database in varying conditions of the audio-phonation loop ».
Journal of the Acoustical Society of America, vol. 145, nº 2.
pp. 1069-1077.
Bouserhal, Rachel E. et Voix, Jérémie.
2019.
« Spear: A speech database for the advancement of intra-aural wearable technology ».
In The 13th International Conference on Advances in Quantitative Laryngology, Voice and Speech Research (Montréal, QC, Canada, June 02-04, 2019)
Bouserhal, Rachel, Sarria-Paja, Milton, Cardinal, Patrick et Voix, Jérémie. 2019. « Classification of nonverbal human produced audio events: a pilot study ». Communication lors de la conférence : National Hearing Conservation Association Annual Conference 2019 (Grapevine, TX, USA, Feb. 07-09, 2019).
Bouzid, Abdel-Hakim et Aweimer, Ali Salah Omar.
2019.
« On the use of gas flow models to predict leak rates through sheet gasket materials ».
Journal of Pressure Vessel Technology, vol. 141, nº 5.
Bouzid, Abdel-Hakim et Pourreza, Mohammad.
2019.
« Analysis of residual stresses in the transition zone of tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology, vol. 141, nº 4.
Bouzid, Abdel-Hakim et Touahri, Hacène.
2019.
« Analytical and numerical modelling of sheet plate cold expanded hole subjected to reverse yielding ».
In ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE) (Salt Lake City, UT, USA, Nov. 11-14, 2019)
American Society of Mechanical Engineers (ASME).
Brassard, David, Dubé, Martine et Tavares, Jason R..
2019.
« Resistance welding of thermoplastic composites with a nanocomposite heating element ».
Composites Part B: Engineering, vol. 165.
pp. 779-784.
Bretin, R., Levesque, M. et Bocher, P..
2019.
« Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 Finite element study of the interaction between grains ».
International Journal of Solids and Structures, vol. 176-177.
pp. 36-48.
Bretin, R., Levesque, M. et Bocher, P..
2019.
« Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 - Cellular Automaton ».
International Journal of Solids and Structures, vol. 176-177.
pp. 49-67.
Brooke, Daniel, Umnova, Olga, Leclaire, Philippe et Dupont, Thomas.
2019.
« Acoustic metamaterial design for low frequency sound absorption in linear and nonlinear regimes ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Cantin, S., Morency, F. et Garnier, F..
2019.
« Comparison between modern engine and old engine aircraft on contrail ice particles formation ».
In 65rd Aeronautics Conference : AERO2019 Proceedings (Laval, QC, Canada, May 14-16, 2019)
Canadian Aeronautics and Space Institute.
Cantin, Sébastien, Morency, François et Garnier, François.
2019.
« Modeling capabilities on the formation of contrails in a commercial CFD code ».
In 24th ISABE Conference (Canberra, Australia, Sept. 22-27, 2019)
ISABE. Carillo, Kevin, Doutres, Olivier et Sgard, Franck. 2019. « Fundamental mechanisms of the objective occlusion effect revisited using a finite element model of the outer ear ». Communication lors de la conférence : 2019 National Hearing Conservation Association Annual Conference (NHCA) (Grapevine, TX, USA, Feb. 06-09, 2019).
Carillo, Kévin, Doutres, Olivier et Sgard, Franck.
2019.
« Numerical investigation of the fundamental low frequency mechanisms of the objective occlusion effect: focus on the earcanal wall vibration ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Chadha, K., Jahazi, M. et Spray, John G..
2019.
« Effect of strain rate on the columnar to equiaxed transition in an as-cast medium-carbon low-alloy steel during hot deformation ».
In Materials Science and Technology (MS&T19) (Portland, OR, USA, Sept. 29-Oct. 3, 2019)
pp. 431-438.
Materials Science and Technology.
Chadha, K., Shahriari, Davood, Aranas, C. Jr., Lapierre-Boire, Louis-Philippe et Jahazi, Mohammad.
2019.
« On the role of chromium in dynamic transformation of austenite ».
Metals and Materials International, vol. 25, nº 3.
pp. 559-569.
Chadha, Kanwal et Jahazi, Mohammad.
12 mars 2019.
« Approche atomistique de la transformation de l’acier ».
[Article de recherche]. Substance ÉTS.
Chadha, Kanwal et Jahazi, Mohammad.
12 mars 2019.
« Atomistic Approach in Steel Transformation ».
[Article de recherche]. Substance ÉTS.
Chatelain, Jean-François, Ouellet-Plamondon, C. M., Lasseur, B. et Kuate-Togue, H..
2019.
« Effect of additives on the machinability of glass fiber reinforced polymer ».
In
Materials Design and Applications II.
Coll. « Advanced Structured Materials », vol. 98.
pp. 295-312. Cham, Suisse : Springer Verlag.
Chatenet, Q., Gagnon, M., Tôn-Thât, L., Fouladirad, M., Remy, E. et Tahan, A. S..
2019.
« Stochastic modelling of cavitation erosion in Francis runner ».
In 29th IAHR Symposium on Hydraulic Machinery and Systems (Kyoto, Japan, Sept. 17-21, 2018)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 240.
UK : IOP Publishing.
Chouak, Mohamed, Dufresne, Louis et Seers, Patrice.
2019.
« Single orifice diesel injector flow characterization and the impact of needle lift using large eddy simulation and proper orthogonal decomposition ».
Journal of Fluids Engineering, vol. 141, nº 5.
Côté, J., Doré, S. et Forgues, D..
2019.
« Revenir aux fondements du lean dans l'usage du PDVSM en construction ».
In Canadian Society for Civil Engineering Annual Conference (CSCE) (Laval, QC, Canada, June 12-15, 2019)
Canadian Society for Civil Engineering.
de Castilla, Hector, Bélanger, Pierre et Zednik, Ricardo J..
2019.
« Generalized dynamic analytical model of piezoelectric materials for characterization using electrical impedance spectroscopy ».
Materials, vol. 12, nº 16.
Delbergue, Dorian, Texier, Damien, Lévesque, Martin et Bocher, Philippe.
2019.
« Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin2ψ and cosα methods ».
Journal of Applied Crystallography, vol. 52, nº 4.
pp. 828-843.
Demers, V.
2019.
« Low-pressure powder injection moulding review: enabling cost effective low and high volume PIM production ».
PIM International, vol. 13, nº 2.
pp. 53-63.
Demers, Vincent.
2019.
« Low-pressure powder injection moulding : Enabling cost-effective low and high-volume production ».
Powder Injection Moulding International, vol. 13, nº 2.
pp. 53-61.
Desmeules, S. et Rousse, D. R..
2019.
« Échangeurs de chaleur géothermiques à boucles ouverte et fermée : I - Contexte et modélisation ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Desmeules, S. et Rousse, D. R..
2019.
« Échangeurs de chaleur géothermiques à boucles ouverte et fermée : III - Étude comparative ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Desmeules, S. et Rousse, D. R..
2019.
« Échangeurs de chaleur géothermiques à boucles ouverte et fermée: II - Méthode de dimensionnement ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Diop, Issa, Nadeau, Sylvie et Emami-Mehrgani, Behnam.
2019.
« A mathematical model: A flexible manufacturing system, prone to error, making two products each with stochastic demand schedules ».
[Article scientifique]. American Journal of Industrial and Business Management, vol. 9, nº 1.
pp. 139-168.
Diotalevi, L., Petit, Y., Peyrache, L. M., Facchinello, Y., Mac-Thiong, J. M. et Wagnac, E..
2019.
« A novel spinal cord surrogate for the study of compressive traumatic spinal cord injuries ».
In 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Berlin, Germany, July 23-27, 2019)
pp. 5678-5680.
Piscataway, NJ, USA : IEEE.
Do, T. T., Vu, V.-H. et Liu, Z..
2019.
« Analytical modal analysis of flexible joint manipulators ».
In Proceedings of the 27th CANCAM (Sherbrooke, QC, Canada, May 27-30, 2019)
Do, Tranh-Trung, Vu, Viet-Hung et Liu, Zhaoheng. 2019. « Automatic generation of inverse dynamics for industrial robots with flexible joints using a computer algebra ». Affiche présentée lors de la conférence : Applications of Computer Algebra (ACA) (Montréal, QC, Canada, July 16-20, 2019).
Dollon, Quentin, Tahan, Antoine, Antoni, Jérôme, Gagnon, Martin et Monette, Christine.
2019.
« Dynamic characterization of hydroelectric turbine with transient data records using OBMA and phase-shift analysis ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 343-355.
INSA.
Doré, Sylvie, Terriault, Patrick et Belleau, Christian.
2019.
« Gathering the voice of the students for accreditation purposes through their definition of “engineer” ».
In Proceedings 2019 Canadian Engineering Education Association (CEEA-ACEG19) Conference (Ottawa, ON, Canada, June 9-12, 2019)
Canadian Engineering Education Association. Doutres, Olivier. 2019. « Occupational noise source localization and hearing protection devices ». Communication lors de la conférence : Symposium on the material acoustics, technologies and industrialization (MATI) (Nanjing, China, Oct. 24-25 2019).
Doutres, Olivier, Sgard, Franck, Terroir, Jonathan, Perrin, Nellie, Jolly, Caroline, Gauvin, Chantal et Negrini, Alessia.
2019.
« A critical review of the literature on comfort of hearing protection devices: definition of comfort and identification of its main attributes for earplug types ».
International Journal of Audiology, vol. 58, nº 12.
pp. 824-833.
Douzi, Wafa, Dugué, Benoit, Vinches, Ludwig, Al Sayed, Chady, Hallé, Stéphane, Bosquet, Laurent et Dupuy, Olivier.
2019.
« Cooling during exercise enhances performances, but the cooled body areas matter: a systematic review with meta-analyses ».
Scandinavian Journal of Medicine and Science in Sports, vol. 29, nº 11.
pp. 1660-1676.
Dupont-Marillia, Frederic, Jahazi, Mohammad et Belanger, Pierre.
2019.
« Live imaging using TFM in a 30-inch forged steel block ».
In ASNT Annual Conference 2019 (Las Vegas, NV, USA, Nov. 18-21, 2019)
ASNT.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Belanger, Pierre.
2019.
« Design and optimisation of a phased array transducer for ultrasonic inspection of large forged steel ingots ».
NDT and E International, vol. 103.
pp. 119-129.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Belanger, Pierre.
2019.
« Influence of local mechanical parameters on ultrasonic wave propagation in large forged steel ingots ».
Journal of Nondestructive Evaluation, vol. 38, nº 3.
Ebrahimi, G. R., Momeni, A., Ezatpour, H. R., Jahazi, M. et Bocher, P..
2019.
« Dynamic recrystallization in Mone1400 Ni-Cu alloy: mechanism and role of twinning ».
Materials Science and Engineering: A, vol. 744.
pp. 376-385.
Eesaee, Mostafa, David, Eric et Demarquette, Nicole R..
2019.
« Effect of blending and nanoclay on dielectric properties of polypropylene ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 26, nº 5.
pp. 1487-1494.
Eesaee, Mostafa, David, Eric, Demarquette, Nicole R., Fabiani, Davide et Palmieri, Fabrizio.
2019.
« Charge transport and accumulation in clay-containing LDPE nanocomposites ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 26, nº 1.
pp. 292-299.
El Wazziki, Mohamed et Ngo, Anh Dung.
2019.
« Design for manufacture: Cost-estimating model for randomly oriented strand advanced composite aerospace parts ».
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 233, nº 6.
pp. 1241-1251.
El-Ghaoui, Khalid, Chatelain, Jean-François et Ouellet-Plamondon, Claudiane.
2019.
« Effect of graphene on machinability of glass fiber reinforced polymer (GFRP) ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 3.
El-Ghaoui, Khalid, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane et Mathieu, Ronan.
2019.
« Effects of nano organoclay and wax on the machining temperature and mechanical properties of Carbon Fiber Reinforced Plastics (CFRP) ».
Journal of Composites Science, vol. 3, nº 3.
El-Sahely, Hassan et Morency, François.
2019.
« Parametric study of the 3D ice block trajectories around a wing ».
In 65rd Aeronautics Conference : AERO2019 Proceedings (Laval, QC, Canada, May 14-16, 2019)
Canadian Aeronautics and Space Institute. Eres-Castellanos, Adriana, Hidalgo, Javier, Zorgani, Muftah, Jahazi, Mohammad, Toda-Caraballo, Isaac, Caballero, Francisca G. et Garcia, Mateo. 2019. « On the control of the scale of nanobainitic microstructures by prior austenite strengthening ». Communication lors de la conférence : European Congress and Exhibition on Advanced Materials and Processes (EUROMAT) (Stockholm, Sweden, Sept. 01-05, 2019).
Ernez, S. et Morency, F..
2019.
« Eulerian-Lagrangian CFD model for aircraft ground deicing by liquid sprays ».
In 65rd Aeronautics Conference : AERO2019 Proceedings (Laval, QC, Canada, May 14-16, 2019)
Canadian Aeronautics and Space Institute.
Ernez, S. et Morency, F..
2019.
« Eulerian–Lagrangian CFD model for prediction of heat transfer between aircraft deicing liquid sprays and a surface ».
International Journal of Numerical Methods for Heat & Fluid Flow, vol. 29, nº 7.
pp. 2450-2475. Ernez, Sami et Morency, François. 2019. « A multi-region CFD model for aircraft ground deicing by liquid spray ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019).
Esouilem, Mohamed, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2019.
« Accident causes involving pressure vessels: A case study analysis with STAMP model ».
In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65.
Dortmund : GfA-Press.
Esouilem, Mohamed, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2019.
« Safety and risk management analysis of accidents related to pressure vessels and piping in Alberta petrochemical industry from 2008 to 2017 ».
In Pressure Vessels and Piping Conference (PVP) 2019 (San Antonio, TX, USA, July 14-19, 2019)
ASME.
Fall, A., Monajati, H., Khodabandeh, A., Fesharaki, M. H., Champliaud, H. et Jahazi, M..
2019.
« Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ».
Materials Science and Engineering: A, vol. 749.
pp. 166-175.
Fannou, Jean-Louis Comlan, Lamarche, Louis, Semassou, Guy Clarence, Stanislaw, Kajl et Vianou, Antoine.
2019.
« Cooling mode experimental analysis of a direct expansion geothermal heat pump with a control depending on the discharge pressure ».
Applied Thermal Engineering, vol. 160.
Fayed, Eslam, Medraj, Mamoun, Shahriari, Davood, Jahazi, Mohammad et Brailovski, Vladimir.
2019.
« Effect of heat treatment holding time on the microstructure and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting ».
In Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Western University - Department of Mechanical and Materials Engineering.
Flores-Maradiaga, A., Benoit, R. et Masson, C..
2019.
« Enhanced modelling of the stratified atmospheric boundary layer over steep terrain for wind resource assessment ».
In WindEurope Conference and Exhibition (Bilbao, Spain, Apr. 02-04, 2019)
Coll. « Journal of Physics: Conference Series », vol. 1222.
UK : Institute of Physics Publishing.
Fort, Valentin, Bouzid, Abdel-Hakim et Gratton, Michel.
2019.
« Analytical modeling of self-loosening of bolted joints subjected to transverse loading ».
Journal of Pressure Vessel Technology, vol. 141, nº 3.
Gautier, Manon, Petit, Yvan, Labbé, David et Wagnac, Éric.
16 janvier 2019.
« Biomechanical Evaluation of Lumbar Belts for Athletes ».
[Article de recherche]. Substance ÉTS.
Gautier, Manon, Petit, Yvan, Labbé, David et Wagnac, Éric.
16 janvier 2019.
« Évaluation biomécanique de ceintures lombaires pour sportifs ».
[Article de recherche]. Substance ÉTS.
Gendron, Mathieu, Hazel, Bruce, Boudreault, Eric, Champliaud, Henri et Pham, Xuan-Tan.
2019.
« Coupled thermo-electromagnetic model of a new robotic high-frequency local induction heat treatment system for large steel components ».
Applied Thermal Engineering, vol. 150.
pp. 372-385.
Généreux, Louis-Alexandre, Lebrun, Gilbert, Viens, Martin et Chatelain, Jean-François.
2019.
« Evaluation of machining defects in a composite laminate by combining non-destructive and tensile testing ».
In
Materials Design and Applications II.
Coll. « Advanced Structured Materials », vol. 98.
pp. 341-362. Cham, Suisse : Springer Verlag.
Genoyer, Julie, Demarquette, Nicole R., Lentzakis, Helen et Diallo, Abdou Khadri.
2019.
« Development of polypropylene nanocomposites reinforced with cellulose filaments ».
In 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC) (Detroit, MI, USA, Mar. 18-21, 2019)
Coll. « Annual Technical Conference - ANTEC, Conference Proceedings »
Society of Plastics Engineers.
Genoyer, Julie, Demarquette, Nicole R. et Soulestin, Jérémie.
2019.
« Effect of clay particles size and location on coalescence in PMMA/PS blends ».
Journal of Rheology, vol. 63, nº 6.
pp. 883-893. Genoyer, Julie, Lentzakis, Helen et Demarquette, Nicole. 2019. « Mechanical properties of cellulose nanofiber reinforced polypropylene ». Communication lors de la conférence : PPS Europe-Africa Regional Conference (Pretoria, South Africa, Nov. 18-21, 2019). Giordano, N., Piche, P., Miranda, M-M., Gunawan, E., Comeau, F. A., Gibout, S., Haillot, D. et Raymond, J.. 2019. « Ground source heat pumps and thermal energy storage systems for off-grid northern communities (Canada) ». Communication lors de la conférence : Reunión Nacional de Geotermia (Medellin, Colombia, Nov. 25-29, 2019). Goff, Allyson, Drees, Elliot, Bernier, Antoine, Bouserhal, Rachel, Voix, Jérémie et Cossette, Isabelle. 2019. « The influence of the isolation and occlusion effects on the classical singer's voice ». Affiche présentée lors de la conférence : CIRMMT-OICRM-BRAMS Student Symposium (COBS) (Montreal, QC, Canada, May 9, 2019).
Grichi, Yosra, Beauregard, Yvan et Dao, Thien-My.
2019.
« An approach to obsolescence forecasting based on Hidden Markov Model and Compound Poisson Process ».
International Journal of Industrial Engineering and Operations Management (IJIEOM), vol. 1, nº 2.
pp. 111-124.
Griseri, V., David, E. et Mary, D..
2019.
« Space charge distribution analysis before and after drying of micro-extruded LDPE/MgO nanocomposites ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Richland, WA, USA,, Oct. 20-23, 2019)
pp. 90-93.
New York : IEEE.
Guilbault, Raynald et Lalonde, Sébastien.
2019.
« A stochastic prediction of roughness evolution in dynamic contact modelling applied to gear mild wear and contact fatigue ».
Tribology International, vol. 140.
Haj Ibrahim, Marwa, Aidibe, Ali, Mahjoub, Mohamed Ali, Tahan, Antoine et Louhichi, Borhen.
2019.
« A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology ».
International Journal of Advanced Manufacturing Technology, vol. 103, nº 1-4.
pp. 409-422.
Helal, Emna, Kurusu, Rafael S., Moghimian, Nima, Gutierrez, Giovanna, David, Eric et Demarquette, Nicole R..
2019.
« Correlation between morphology, rheological behavior, and electrical behavior of conductive cocontinuous LLDPE/EVA blends containing commercial graphene nanoplatelets ».
Journal of Rheology, vol. 63, nº 6.
pp. 961-976.
Helal, Emna, Kurusu, Rafael, David, Eric, Moghimian, Nima et Demarquette, Nicole.
2019.
« Time-dependent rheological and electrical properties of LLDPE/EVA blends containing graphene ».
In 35th Polymer Processing SocietyAnnual Meeting 2019 (PPS-35) (Cesme-Izmir, Turkey, May 26-30, 2019)
pp. 171-175.
Polymer Processing Society.
Hériveaux, Yoann, Nguyen, Vu-Hieu, Brailovski, Vladimir, Gorny, Cyril et Haiat, Guillaume.
2019.
« Reflection of an ultrasonic wave on the bone-implant interface: effect of the roughness parameters ».
Journal of the Acoustical Society of America, vol. 145, nº 6.
pp. 3370-3381.
Huang, W., Causse, P., Brailovski, V., Hu, H. et Trochu, F..
2019.
« Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling ».
Composites Part A: Applied Science and Manufacturing, vol. 124.
Huck, Violaine, Morency, François et Beaugendre, Héloïse.
2019.
« Grid study for Delayed Detached Eddy-Simulation’s grid of a pre-stalled wing ».
In 65rd Aeronautics Conference : AERO2019 Proceedings (Laval, QC, Canada, May 14-16, 2019)
Canadian Aeronautics and Space Institute.
Ibrahem, Ibrahem M. A., Akhrif, Ouassima, Moustapha, Hany et Staniszewski, Martin.
2019.
« Neural networks modelling of aero-derivative gas turbine engine: a comparison study ».
In Proceedings of the 16th International Conference on Informatics in Control, Automation and Robotics (ICINCO) (Prague, Czech Republic, July 29-31, 2019)
pp. 738-745.
SciTePress.
Ignatowicz, Kevin, Morency, François et Beaugendre, Héloïse.
2019.
« Numerical simulation of ice accretion using Messinger-based approach: Effects of surface roughness ».
In 65rd Aeronautics Conference : AERO2019 Proceedings (Laval, QC, Canada, May 14-16, 2019)
Canadian Aeronautics and Space Institute.
Ignatowicz, Kevin, Morency, François et Beaugendre, Héloïse.
2019.
« Simulations numériques de changement de phase appliquées au givrage en aéronautique ».
In XIVème Colloque International Franco-Québécois en énergie (CIFQ2019) (Baie St-Paul, QC, Canada, June 16-20, 2019)
CIFQ.
Ignatowicz, Kevin, Morency, François et Lopez, Pierre.
2019.
« Dynamic moment model for numerical simulation of a 6-DOF plate trajectory around an aircraft ».
Journal of Aerospace Engineering, vol. 32, nº 5.
Ignatowicz, Kevin, Morency, François et Lopez, Pierre.
11 décembre 2019.
« Predicting Ice Debris Trajectories Around an Aircraft in Flight ».
[Article de recherche]. Substance ÉTS.
Ignatowicz, Kevin, Morency, François et Lopez, Pierre.
11 décembre 2019.
« Prédire la trajectoire d’un débris de glace autour d’un avion en vol ».
[Article de recherche]. Substance ÉTS.
Inaekyan, K., Kreitcberg, A., Turenne, S. et Brailovski, V..
2019.
« Microstructure and mechanical properties of laser powder bed-fused IN625 alloy ».
Materials Science and Engineering: A, vol. 768.
Jacques, E., Desbiens, E., Boivin, D. et Nadeau, S.. 2019. « Technologies numériques : une révolution en marche dans la gestion des risques ». Communication lors de la conférence : Panel, Événement Les Affaires - SST (Montréal, QC, Canada, 11 sept. 2019). Jahromi, A., Dubé, M., Serdyuk, Y., Rouhi, M. S. et Fagerström, M.. 2019. « Simulation of induction welding process for glass fiber thermoplastic composites in aerospace applications ». Communication lors de la conférence : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2019).
Javadi, Hamid, Jomaa, Walid, Songmene, Victor, Brochu, Myriam et Bocher, Philippe.
2019.
« Inconel 718 superalloy controlled surface integrity for fatigue applications produced by precision turning ».
International Journal of Precision Engineering and Manufacturing, vol. 20, nº 8.
pp. 1297-1310.
Javanbakht, Taraneh, Laurent, Sophie, Stanicki, Dimitri et David, Eric.
2019.
« Related physicochemical, rheological, and dielectric properties of nanocomposites of superparamagnetic iron oxide nanoparticles with polyethyleneglycol ».
Journal of Applied Polymer Science, vol. 137, nº 3.
Jbira, Ibtissem, Ben Makhlouf, Aicha, Louhich, Borhen, Tahan, Antoine, Mahjoub, Mohamed Ali et Deneux, Dominique.
2019.
« A comparative study of extraction cylinder features in industrial point clouds ».
In 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019)
pp. 431-441.
Los Alamitos, CA, USA : IEEE Computer Society.
Jbira, Ibtissem, Tahan, Antoine, Bonsaint, Serge, Mahjoub, Mohamed Ali et Louhichi, Borhen.
2019.
« Reproducibility experimentation among computer-aided inspection software from a single point cloud ».
Journal of Control Science and Engineering, vol. 2019.
Kali, Yassine, Saad, Maarouf, Kenné, Jean-Pierre et Benjelloun, Khalid.
2019.
« Robot manipulator control using backstepping with Lagrange’s extrapolation and PI compensator ».
In
New Developments and Advances in Robot Control.
Coll. « Studies in Systems, Decision and Control », vol. 175.
pp. 137-161. Singapore : Springer International Publishing.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2019.
« Effect of thermal ratcheting on the mechanical properties of Teflon and fiber based gasket materials ».
Journal of Applied Polymer Science, vol. 136, nº 13.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2019.
« Influence of thermal ratcheting on the creep and mechanical properties of high-density polyethylene ».
Journal of Engineering Materials and Technology, vol. 141, nº 4.
Kedadouche, Mourad, Liu, Zhaoheng et Thomas, Marc.
2019.
« Early bearing defect detection in a noisy environment based on a method combining singular value decomposition and empirical mode decomposition ».
In Book of Proceedings : SURVISHNO 2019 (Lyon, France, July 8-10, 2019)
pp. 706-721.
INSA. Khademi Far, Ali, Théroux, Louis-Daniel, Viens, Martin, Arés, Oliver et Bendada, Hakim. 2019. « Non-destructive evaluation of impact damage in CFRP by means of IRT, shearography and ultrasonic testing ». Communication lors de la conférence : NDT in Canada 2019 (Edmonton, AB, Canada, June 18-20, 2019).
Khalifa, Mohamed, Barka, Noureddine, Brousseau, Jean et Bocher, Philippe.
2019.
« Optimization of the edge effect of 4340 steel specimen heated by induction process with flux concentrators using finite element axis-symmetric simulation and experimental validation ».
International Journal of Advanced Manufacturing Technology, vol. 104, nº 9-12.
pp. 4549-4557.
Khalifa, Mohamed, Barka, Noureddine, Brousseau, Jean et Bocher, Philippe.
2019.
« Reduction of edge effect using response surface methodology and artificial neural network modeling of a spur gear treated by induction with flux concentrators ».
International Journal of Advanced Manufacturing Technology, vol. 104, nº 1-4.
pp. 103-117.
Khalifa, Mohamed, Barka, Noureddine, Brousseau, Jean et Bocher, Philippe.
2019.
« Sensitivity study of hardness profile of 4340 steel disc hardened by induction according to machine parameters and geometrical factors ».
International Journal of Advanced Manufacturing Technology, vol. 101, nº 1-4.
pp. 209-221.
Khan, Shehryar, Grigorie, Lucian Teodor, Botez, Ruxandra Mihaela, Mamou, Mahmoud et Mébarki, Youssef.
2019.
« Fuzzy Logic-based control for a morphing wing tip actuation system: design, numerical simulation, and wind tunnel experimental testing ».
Biomimetics, vol. 4, nº 4.
Kone, Tenon Charly, Panneton, Raymond et Dupont, Thomas.
2019.
« Thermo-visco-acoustic metamaterials to damp acoustic modes in a complex geometry ».
In 26th International Congress on Sound and Vibration (ICSV) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Konopatskii, A. S., Dubinskii, S. M., Zhukova, Yu S., Inaekyan, K., Brailovskii, V., Prokoshkin, S. D. et Filonov, M. R..
2019.
« Experimental Search for Chemical Compositions of Superelastic Titanium Alloys with Enhanced Functional Properties ».
Metal Science and Heat Treatment, vol. 61.
pp. 333-339. Kouamou, F. B., Songmene, V. et Kouam, J.. 2019. « Effect of tool paths on fine & ultrafine particles emission & distribution during polishing of medium silica content granite ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019).
Koubikana Pambou, Claude Hugo, Raymond, Jasmin et Lamarche, Louis.
2019.
« Improving thermal response tests with wireline temperature logs to evaluate ground thermal conductivity profiles and groundwater fluxes ».
Heat and Mass Transfer, vol. 55, nº 6.
pp. 1829-1843.
Kouedeu, Annie Francie, Kenné, Jean-Pierre et Songmene, Victor.
2019.
« Optimal production planning of hybrid manufacturing/remanufacturing systems under deteriorations ».
In Proceedings of the 9th International Conference on Industrial Engineering and Operations Management (IEOM) (Bangkok, Thailand, March 05-07, 2019)
pp. 1382-1390.
IEOM Society.
Kreitcberg, A., Sheremetyev, V., Prokoshkin, S. et Brailovski, V..
2019.
« Laser powder bed fusion of superelastic Ti-18Zr-14Nb alloy: influence of processing and post-processing conditions on structure, texture, and mechanical properties ».
In International Conference on Shape Memory and Superelastic Technologies, SMST 2019; The Bodensee Forum (Konstanz, Germany, May 13-17, 2019)
pp. 127-128.
ASM International.
Kreitcberg, A., Sheremetyev, V., Tsaturyants, M., Prokoshkin, S. et Brailovski, V..
2019.
« Optimization of post-processing annealing conditions of the laser powder bed-fused Ti–18Zr–14Nb shape memory alloy: structure and functional properties ».
Shape Memory and Superelasticity, vol. 5, nº 2.
pp. 172-181.
Kreitcberg, Alena, Inaekyan, Karine, Turenne, Sylvain et Brailovski, Vladimir.
2019.
« Temperature- and time-dependent mechanical behavior of post-treated IN625 alloy processed by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 3.
Lamarche, Louis.
2019.
« Horizontal ground heat exchangers modelling ».
Applied Thermal Engineering, vol. 155.
pp. 534-545. Laperle, Nick et Voix, Jérémie. 2019. « CHHA talks: our stores, our journeys, our future ». Communication lors de la conférence : 2019 CHHA Educational Conference and Trade Show (Montréal, QC, Canada, May 30 - June 02, 2019).
Laugier, M., Tremblay, J., Petit, Y., Grignon-Lemieux, A., Levasseur, A. et Lussier, B..
2019.
« Three-dimensional kinematic evaluation of tightrope CCL in a canine in vitro cranial cruciate deficient stifle model ».
Canadian Journal of Veterinary Research, vol. 83, nº 4.
pp. 317-321.
Le Floc'h, Arnaud, Mohammed-Taifour, Abdelouahab, Dufresne, Louis et Weiss, Julien.
2019.
« Investigation of wall-pressure fluctuations in three pressure-induced turbulent separation bubbles ».
In AIAA Aviation 2019 Forum (Reston, VA, USA, June 17-21, 2019)
Coll. « AIAA Paper », vol. AIAA 2019-3650.
American Institute of Aeronautics and Astronautics.
Le Roux, D., Bourbonnais, M., Déry, P. et Rousse, D. R..
2019.
« Modélisation et simulations technico-économiques comparatives du chauffage solaire de l'eau par des capteurs photovoltaïque et thermique ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Le Roux, Diane et Rousse, Daniel R..
20 août 2019.
« Comparaison entre les chauffe-eau thermiques et photovoltaïques ».
[Article de recherche]. Substance ÉTS.
Le Roux, Diane et Rousse, Daniel R..
20 août 2019.
« Comparing Thermal and Photovoltaic Water-Heaters ».
[Article de recherche]. Substance ÉTS.
Le, Phuoc Luong, Dao, Thien-My et Chaabane, Amin.
2019.
« BIM-based framework for temporary facility layout planning in construction site: a hybrid approach ».
Construction Innovation, vol. 19, nº 3.
pp. 424-464.
Lecours, Caroline, Petit, Yvan et Wagnac, Eric.
2019.
« Biomechanical analysis of head impacts during real time soccer play: A preliminary study ».
[Résumé d'une communication à une conférence]. Medicine & Science in Sports & Exercise, vol. 51, nº 6, suppl.
pp. 472-473.
Legault, Xavier, Bouzid, Abdel-Hakim et Aweimer, Ali Salah Omar.
2019.
« Mechanical characterization of valve compression packing at high temperature ».
In ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE) (Salt Lake City, UT, USA, Nov. 11-14, 2019)
American Society of Mechanical Engineers (ASME).
Léger, Jérémie et Rousse, Daniel R..
2019.
« The use of virtual heaters in assessing the effect of window glazing, window-to-wall ratio and air exchange rate on optimal indoor heat distribution ».
In Proceedings of the 16th International Heat Transfer Conference (IHTC 16) (Beijing, China, Aug. 10-15, 2018)
pp. 7818-7825.
Begell House.
Léger, Jérémie, Rousse, Daniel R. et Lassue, Stéphane.
2019.
« Optimal indoor heat distribution: virtual heaters ».
Applied Energy, vol. 254.
pp. 544-555.
Lemaire, Romain, Boudreau, Amélie et Seers, Patrice.
2019.
« Performance and emissions of a DISI engine fueled with gasoline/ethanol and gasoline/C-4 oxygenate blends – Development of a PM index correlation for particulate matter emission assessment ».
Fuel, vol. 241.
pp. 1172-1183.
Lemonnier, D., Mac-Thiong, J. M. et Belanger, P..
2019.
« Transverse spinal cord blood vessels visualization in a pig using plane wave doppler ultrasound imaging ».
Acta Acustica United with Acustica, vol. 105, nº 6.
pp. 1278-1282.
Lemonnier, David, Mac-Thiong, Jean-Marc et Belanger, Pierre.
2019.
« Flow quantification in a wall-less multiple flow phantom using ultrasound plane wave doppler imaging ».
Acta Acustica united with Acustica, vol. 105, nº 1.
pp. 130-138.
Lerouge, Sophie.
2019.
« Sterilization and cleaning of metallic biomaterials ».
In
Metals for biomedical devices.
2nd edition.
Coll. « Woodhead Publishing Series in Biomaterials ».
pp. 405-428. Woodhead Publishing.
Letenneur, Morgan, Kreitcberg, Alena et Brailovski, Vladimir.
2019.
« Optimization of laser powder bed fusion processing using a combination of melt pool modeling and design of experiment approaches: Density control ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 1.
Levillain, Florent, St-Onge, David, Beltrame, Giovanni et Zibetti, Elisabetta.
2019.
« Towards situational awareness from robotic group motion ».
In The 28th IEEE International Conference on Robot & Human Interactive Communication (IEEE RO-MAN) (New Delhi, India, Oct. 14-18, 2019)
IEEE.
Liu, J. H., Vanderesse, N., Stinville, J. C., Pollock, T. M., Bocher, P. et Texier, D..
2019.
« In-plane and out-of-plane deformation at the sub-grain scale in polycrystalline materials assessed by confocal microscopy ».
Acta Materialia, vol. 169.
pp. 260-274.
Luan, Yu, Sgard, Franck, Benacchio, Simon, Nélisse, Hugues et Doutres, Olivier.
2019.
« A coupled finite element/transfer matrix method to simulate the insertion loss of earplugs in an acoustic test fixture ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Luan, Yu, Sgard, Franck, Benacchio, Simon, Nélisse, Hugues et Doutres, Olivier.
2019.
« A transfer matrix model of the IEC 60318-4 ear simulator: Application to the simulation of earplug insertion loss ».
Acta Acustica united with Acustica, vol. 105, nº 6.
pp. 1258-1268.
Maghrabie, Hesham F., Beauregard, Yvan et Schiffauerova, Andrea.
2019.
« Multi-criteria decision making problems with unknown weight information under uncertain evaluations ».
Computers and Industrial Engineering, vol. 133.
pp. 131-138.
Maghrabie, Hesham, Beauregard, Yvan et Schiffauerova, Andrea.
2019.
« Grey-based multi-criteria decision analysis approach: addressing uncertainty at complex decision problems ».
Technological Forecasting and Social Change, vol. 146.
pp. 366-379.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2019.
« A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals ».
International Journal of Material Forming, vol. 12, nº 4.
pp. 693-702.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2019.
« Prediction of material behavior during biaxial stretching of superplastic 5083 aluminum alloy ».
International Journal of Advanced Manufacturing Technology, vol. 102, nº 5-8.
pp. 2357-2366.
Marcotte, Pierre, Gaudreau, Marc-André, Laville, Frédéric et Padois, Thomas.
2019.
« Characterization of nail guns impact vibration ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Martin, Laurence, Negrini, Alessia, Gaudreau, Marc-André, Sgard, Franck, Berbiche, Djamal et Doutres, Olivier.
2019.
« Earplug personal attenuation rating (PAR) in noise-exposed workers: evolution over a five weeks follow-up ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Martinez, Nicolas, Benchaabane, Youssef, Silva, Rosa Elvira, Ilinca, Adrian, Ibrahim, Hussein, Chandra, Ambrish et Rousse, Daniel R..
2019.
« Computer model for a wind–diesel hybrid system with compressed air energy storage ».
Energies, vol. 12, nº 18.
Masoumi, F., Shahriari, D., Monajati, H., Cormier, J., Flipo, B. C. D., Devaux, A. et Jahazi, M..
2019.
« Linear friction welding of AD730TM Ni-base superalloy: process-microstructure-property interactions ».
Materials and Design, vol. 183.
Maurel, Pierre, Weiss, Laurent, Bocher, Philippe, Fleury, Eric et Grosdidier, Thierry.
2019.
« Oxide dependent wear mechanisms of titanium against a steel counterface: influence of SMAT nanostructured surface ».
Wear, vol. 430-431.
pp. 245-255.
Melanson, Annick et Nadeau, Sylvie.
2019.
« Resilience engineering for sustainable prevention in the manufacturing sector: A comparative study of two methods of risk analysis ».
American Journal of Industrial and Business Management, vol. 9, nº 1.
pp. 267-281.
Menanteau, S. et Lemaire, R..
2019.
« Influence of aggregate size on themodeling of laser-inducedincandescence of soot formed in aturbulent diffusion of Diesel ».
In Combustion Institute Canadian Section : Spring Technical Meeting 2019 (Kelowna, BC, Canada, May 13-16, 2019)
Menanteau, Sebastien et Lemaire, Romain.
2019.
« Influence of the expression used to account for the heat conduction flux when modeling the laser-induced incandescence of soot aggregates produced in a turbulent flame of Diesel ».
In XII International Conference on Computational Heat, Mass and Momentum Transfer (Rome, Italy, Sept. 03-06, 2019)
Mkaouar, Ahmed et Morency, François. 2019. « Unsteady Simulation of the rotor Caradonna & Tung with SU2 ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019).
Mohammadian, Neda, Turenne, Sylvain et Brailovski, Vladimir.
2019.
« Electropolishing of laser powder bed-fused IN625 components in an ionic electrolyte ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 4.
Mohellebi, H. et Hallé, S.. 2019. « Thermoelectric cooling garment ». Affiche présentée lors de la conférence : 6th IEEE Research Boost (Montréal, QC, Canada, Oct. 30, 2019). Montlahuc, Jérémy, Rivest, Louis, Pernot, Jean-Philippe, Tahan, Antoine et Polette, Arnaud. 2019. « Vers une utilisation conjointe de données multi-sources pour la génération et le traitement de nuages de points multicouches de parcelles et d’ouvrages existants : constats et premiers éléments d’analyse ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019).
Morales Garza, Viridiana G., Sumner, Jonathon, Nathan, Jörn et Masson, Christian.
2019.
« Evaluating the accuracy of RANS wind flow modeling over forested terrain - Part 1: canopy model validation ».
Journal of Solar Energy Engineering, vol. 141, nº 4.
Mouâa, Amal, Laghzale, Nor Eddine et Bouzid, Abdel-Hakim.
2019.
« Elastic-plastic stresses in shrink fit with a solid shaft ».
In 14th Congress of Mechanics (CMM2019) (Rabat, Morocco, April 16-19, 2019)
Coll. « MATEC Web of Conferences », vol. 286.
EDP Sciences.
Nadeau, S., Salmanzadeh, H., Ahmadi, M. et Landau, K..
2019.
« Aviation deicing workers, global risk assessment of musculoskeletal injuries ».
International Journal of Industrial Ergonomics, vol. 71.
pp. 8-13. Nadeau, Sylvie. 2019. « Incidences du numérique sur le travail ». Communication lors de la conférence : École d’été Industrie 4.0 (Montréal, QC, Canada, 27 août 2019). Nadeau, Sylvie. 2019. « Incidences du numérique sur le travail ». Communication lors de la conférence : Mardi 4.0/Séminaires du Service des Enseignements Généraux, École de technologie supérieure (Montréal, QC, Canada, 5 nov. 2019). Nadeau, Sylvie. 2019. « La métallurgie dans un environnement techno ». Communication lors de la conférence : 4ième Colloque de la métallurgie intelligente (Trois-Rivières, QC, Canada, 31 oct.-1 nov. 2019).
Nadeau, Sylvie et Landeau, Kurt.
5 novembre 2019.
« Impact of Digital on Work ».
[Article de recherche]. Substance ÉTS.
Nadeau, Sylvie et Landeau, Kurt.
5 novembre 2019.
« Incidences du numérique sur le travail ».
[Article de recherche]. Substance ÉTS.
Nadon, Vincent et Voix, Jeremie.
2019.
« Effects of noise exposure on hearing health evaluated through short interval otoacoustic emission monitoring: preliminary results ».
In 176th Meeting of Acoustical Society of America (Victoria, BC, Canada, Nov. 5-9, 2018)
Coll. « Proceedings of Meetings on Acoustics », vol. 35.
USA : AIP Publishing.
Nadon, Vincent et Voix, Jérémie.
15 janvier 2019.
« Les émissions otoacoustiques : une mesure de la santé auditive ».
[Article de recherche]. Substance ÉTS.
Nadon, Vincent et Voix, Jérémie.
15 janvier 2019.
« Otoacoustic Emissions: an Objective Measure of Hearing Health ».
[Article de recherche]. Substance ÉTS.
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2019.
« A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions ».
Engineering Structures, vol. 197.
Nélisse, Hugues, Bonnet, Fabien, Nogarolli, Marcos et Voix, Jérémie.
2019.
« A simple low-invasive method to assess sound pressure levels at the eardrum using dual-microphone measurements in the open or occluded ear ».
In INTER-NOISE 2019 MADRID : 48th International Congress and Exhibition on Noise Control Engineering (Madrid, Spain, June 16-19, 2019)
pp. 3556-3567.
Institute of Noise Control Engineering.
Nemati, A., Nadeau, S., Ateme-Nguema, B. et Belmonte, J..
2019.
« Identifying lean tools to improve mining productivity and OHS conditions ».
In 13ème Conférence internationale de CIGI QUALITA (Montréal, QC, Canada, Juin 25-28, 2019)
Nemati, Ali, Nadeau, Sylvie et Ateme-Nguema, Barthélémy.
2019.
« Lean mining, productivity and occupational health and safety: An expert-elicitation study ».
American Journal of Industrial and Business Management, vol. 9, nº 11.
pp. 2034-2049.
Ngo, A. D., Dhaouadi, T., Ragu, J. B., Rodriguez-Uribe, A., Misra, M. et Mohanty, A. K..
2019.
« Characterization and thermal effect on mechanical properties of biomaterial-reinforced-polypropylene ».
In ICCM22 : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2019)
pp. 3198-3203.
Melbourne, VIC : Engineers Australia. Ngo, Anh Dung, Khay, Mohamed et Dhaouadi, Tahar. 2019. « Mechanical behavior modelling of composite materials ». Communication lors de la conférence : 10th International Conference on Mechanical and Aerospace Engineering (ICMAE 2019) (Brussels, Belgium, July 22-25, 2019).
Ngô, Valérie Tuyêt Mai, Nadeau, Sylvie et Hallé, Stéphane.
2019.
« Validation of a cooling vest’s usability matrix for deep and ultra-deep mining environments ».
In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65.
Dortmund : GfA-Press.
Nguyen, Trung Hieu, Nguyen-Tri, Phuong et Garnier, Francois.
2019.
« Evaluation of the relationship between the aerothermodynamic process and operational parameters in the high-pressure turbine of an aircraft engine ».
Aerospace Science and Technology, vol. 86.
pp. 93-105.
Nguyen, Trung Hieu, Nguyen-Tri, Phuong, Vancassel, Xavier et Garnier, François.
2019.
« Aero-thermodynamic and chemical process interactions in an axial high-pressure turbine of aircraft engines ».
International Journal of Engine Research, vol. 20, nº 6.
pp. 653-669.
Niknam, Seyed Ali, Saberi, Masoud, Kouam, Jules, Hashemi, Ramin, Songmene, Victor et Balazinski, Marek.
2019.
« Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC) ».
Journal of Central South University, vol. 26, nº 6.
pp. 1563-1572.
Niknam, Seyed Ali, Tiabi, Azziz et Songmene, Victor.
2019.
« Burr edge occupancy: edge finishing index for milling machined parts ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 43, nº 2.
pp. 248-255.
Nogarolli, Marcos A.C., Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie.
2019.
« Design and laboratory validation of an in-ear noise dosimetry device ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association. Olufayo, Oluwole A., Chaieb, Oussama, Songmene, Victor et Jahazi, Mohammad. 2019. « Machining studies on high silicon content Al-Si alloys for the aerospace industry ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019).
Olufayo, Oluwole A., Che, Hanqing, Songmene, Victor, Katsari, Christina et Yue, Stephen.
2019.
« Machinability of Rene 65 superalloy ».
Materials, vol. 12, nº 12.
Olufayo, Oluwole A., Elfasi, Osamaand et Songmene, Victor.
2019.
« Machinability studies of ferritic, austenitic and martensitic stainless steels ».
In Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Western University - Department of Mechanical and Materials Engineering.
Omrani, Amine, Langlois, Sébastien, Van Dyke, Pierre, Sattarpanah Karganroudi, Sasan et Lalonde, Sébastien.
2019.
« Fatigue strength evaluation for individual strands of overhead conductors using a biaxial fretting fatigue test bench ».
In 12th International Conference on Multiaxial Fatigue and Fracture (ICMFF) (Bordeaux, France, June 24-26, 2019)
Coll. « MATEC Web of Conferences », vol. 300.
EDP Sciences.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2019.
« Production and replacement planning of a deteriorating remanufacturing system in a closed-loop configuration ».
Journal of Manufacturing Systems, vol. 53.
pp. 234-248.
Ouellet, Yannick, Savaria, Christian, Roy, François, Moustapha, Hany et Garnier, François.
2019.
« A Preliminary design system for turbine discs ».
International Journal of Turbo and Jet Engines, vol. 36, nº 3.
pp. 329-338.
Padois, Thomas, Doutres, Olivier, Nelisse, Hugues et Sgard, Franck.
2019.
« Acoustic imaging using different weighting functions with the generalized cross correlation based on the generalized mean ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Padois, Thomas, Doutres, Olivier et Sgard, Franck.
2019.
« On the use of modified phase transform weighting functions for acoustic imaging with the generalized cross correlation ».
Journal of the Acoustical Society of America, vol. 145, nº 3.
pp. 1546-1555.
Padois, Thomas, Doutres, Olivier, Sgard, Franck et Berry, Alain.
2019.
« Développement d’une antenne microphonique intégrant un système optique pour identifier la position des sources sonoresles plus bruyantes en milieu industriel ».
Coll. « Rapports scientifiques », vol. R-1038.
Institut de Recherche Robert-Sauvé en Santé et en Sécurité du Travail (IRSST). 70 p.
Padois, Thomas, Doutres, Olivier, Sgard, Franck et Berry, Alain.
2019.
« Optimization of a spherical microphone array geometry for localizing acoustic sources using the generalized cross-correlation technique ».
Mechanical Systems and Signal Processing, vol. 132.
pp. 546-559.
Padois, Thomas, Gaudreau, Marc-André, Marcotte, Pierre et Laville, Frédéric.
2019.
« Identification of noise sources using a time domain beamforming on pneumatic, gas and electric nail guns ».
Noise Control Engineering Journal, vol. 67, nº 1.
pp. 11-22.
Padois, Thomas, Prenant, Simon, Rolland, Valentin, Chérif, Raef, Robin, Olivier, Atalla, Noureddine, Etchessahar, Manuel, Klop, Richard, Laurier Chapleau, Sebastien, Dupont, Thomas et Doutres, Olivier.
2019.
« Comparison of the reception plate method and the inverse force method for assessing the power of a dummy vibratory source ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Palacios-Ríos, J. H., Godbout, S., Brassard, P., Zegan, D., Le Roux, É, Diaz-Acosta, M. C. et Seers, P..
2019.
« Catalytic cracking to optimize pyrolysis of plastic waste: Preliminary study ».
In Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition (AWMA) (Ville de Québec, QC, Canada, June 25-28, 2019)
Air and Waste Management Association.
Palussiere, J., De Baere, T., Garnon, J., Valette, P. J., Ghelfi, J., Frandon, J., Soulez, G., Bouvier, A., Sapoval, M., Lerouge, S., Yu, F., Gaubert, J. Y., Kheiri, M., Barral, P. A., Tradi, F., Habert, P., Hak, J. F., Bartoli, A., Beregi, J. P., Vernhet, H., De Bazelaire, C., De Kerviler, E., Tasu, J. P., Dabadie, A., Vidal, V. et Jacquier, A..
2019.
« Mise au point en radiologie interventionnelle ».
Journal d'imagerie diagnostique et interventionnelle, vol. 2, nº 5.
pp. 235-240.
Parent-Simard, T., Landry-Blais, A., Dubois, P. K., Picard, M. et Brailovski, V..
2019.
« Effect of surface roughness induced by laser powder bed fusion additive manufacturing in a mini-channel heat exchanger ».
In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT 2019 (Phoenix, AZ, USA, June 17-21, 2019)
Coll. « Proceedings of the ASME Turbo Expo »
American Society of Mechanical Engineers (ASME).
Pereira, Daniel et Belanger, Pierre.
2019.
« Inverse characterization of adhesive shear modulus in bonded stiffeners using ultrasonic guided waves ».
In 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018)
Coll. « AIP Conference Proceedings », vol. 2102.
USA : AIP Publishing.
Pereira, Daniel, Haiat, Guillaume, Fernandes, Julio et Belanger, Pierre.
2019.
« Effect of intracortical bone properties on the phase velocity and cut-off frequency of low-frequency guided wave modes (20-85 kHz) ».
Journal of the Acoustical Society of America, vol. 145, nº 1.
pp. 121-130. Peretti, Thibaut et Voix, Jérémie. 2019. « Wireless communication stack for the connected worker 4.0 ». Affiche présentée lors de la conférence : École d’Été Industrie 4.0 = Summer School Industry 4.0 (Montréal, QC, Canada, 26-28 août 2019).
Perna, Maxime, Padois, Thomas, Dumoulin, Romain, Doutres, Olivier et Dupont, Thomas.
2019.
« Noise from outdoor music activities: selected examples of regulations and recommendations ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Perreault, L. et Rousse, D. R..
2019.
« Étude de faisabilité d'un collecteur solaire perforé non-vitré jumelé à des échangeurs d'air pour un bâtiment agricole ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Pham, Q. H., Gagnon, M., Tahan, A. et Monette, C..
2019.
« Interpolation of periodic hidden signal measured at steady-operating conditions on hydroelectric turbine runners ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 28-39.
INSA.
Piché, P., Haillot, D., Gibout, S., Arrabie, C., Lamalice, A., Rousse, D. R., Py, X., Giordano, N. et Raymond, J..
2019.
« Serriculture circumpolaire : État de l'art et étude de cas au Nunavik ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Piché, P., Haillot, D., Gibout, S., Arrabie, C., Lamalice, A., Rousse, D. R., Py, X., Giordano, N. et Raymond, J..
2019.
« Serriculture circumpolaire : État de l’art et étude de cas au Nunavik ».
In XIVe Colloque interuniversitaire franco-québécois sur la Thermique des Systèmes (CIFQ) (Baie St-Paul, QC, Canada, 16-20 juin 2019)
Piché, Paul, Gibout, Stéphane, Haillot, Didier, Arrabie, Cédric, Bedecarrats, Jean-Pierre, Rousse, Daniel R., Py, Xavier, Giordano, Nicolo et Raymond, Jasmin. 2019. « Design, construction and analysis of a thermal energy storage system adapted to greenhouse cultivation in isolated northern communities. ». Affiche présentée lors de la conférence : Séminaire annuel du Labex DRIIHM (Lyon, France, 7-9 octobre 2019). Piché, Paul, Gibout, Stéphane, Haillot, Didier, Arrabie, Cédric, Bedecarrats, Jean-Pierre, Rousse, Daniel, Py, Xavier, Giordano, Nicolo et Raymond, Jasmin. 2019. « Design, construction and analysis of a thermal energy storage system adapted to greenhouse cultivation in isolated northern communities ». Affiche numéro ANR-11-LABX-0010 présentée lors de la conférence : International Symposium of Labex DRIIHM - 2019 (Lyon, France, Oct. 07-09, 2019).
Piengang, Fabrice Chilly Ngamaleu, Beauregard, Yvan et Kenné, Jean-Pierre.
2019.
« An APS software selection methodology integrating experts and decisions-maker’s opinions on selection criteria: a case study ».
Cogent Engineering, vol. 6, nº 1.
Pintat, Valentin, Larivière, Marie-Christine, Lehmann, Alexandre et Voix, Jérémie. 2019. « Preventing hearing loss in the young generation: meet the smart wearable sonoshirt ». Affiche présentée lors de la conférence : World Hearing Day (Montreal, QC, Canada, Mar. 22, 2019).
Plamondon, E. et Seers, P..
2019.
« Parametric study of pilot–main injection strategies on the performance of a light-duty diesel engine fueled with diesel or a WCO biodiesel–diesel blend ».
Fuel, vol. 236.
pp. 1273-1281.
Poissenot-Arrigoni, Bastien, Benacchio, Simon, Sgard, Franck et Doutres, Olivier.
2019.
« An artificial ear to assess objective indicators related to the acoustical comfort dimension of earplugs: validation of a vibro acoustic model for insertion loss and occlusion effect assessment ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Polotski, V., Kenne, J. P. et Gharbi, A..
2019.
« Joint production and maintenance optimization in flexible hybrid manufacturing-remanufacturing systems under age-dependent deterioration ».
International Journal of Production Economics, vol. 216.
pp. 239-254.
Polotski, Vladimir, Beauregard, Yvan et Franzoni, Arthur.
2019.
« Combining predetermined and measured assembly time techniques: Parameter estimation, regression and case study of fenestration industry ».
International Journal of Production Research, vol. 57, nº 17.
pp. 5499-5519.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2019.
« Optimal production and corrective maintenance in a failure-prone manufacturing system under variable demand ».
Flexible Services and Manufacturing Journal, vol. 31, nº 4.
pp. 894-925.
Polotski, Vladmir, Kenné, Jean-Pierre et Gharbi, Ali.
2019.
« Production control of hybrid manufacturing-remanufacturing systems under demand and return variations ».
International Journal of Production Research, vol. 57, nº 1.
pp. 100-123.
Poulin, J.-R., Kreitcberg, A., Terriault, P. et Brailovski, V..
2019.
« Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity ».
International Journal of Fatigue, vol. 127.
pp. 144-156. Poulin, Jean-Rene, Terriault, Patrick et Brailovski, Vladimir. 2019. « Implementation of the kitagawa-takahashi approach for prediction of fatigue limit of inconel 625 components containing intentionally-seeded defects ». Communication lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019).
Prenant, Simon, Rolland, Valentin, Padois, Thomas, Chérif, Raef, Etchessahar, Manuel, Klop, Richard, Laurier Chapleau, Sebastien, Dupont, Thomas et Doutres, Olivier.
2019.
« Using transfer path analysis methods for assessing the velocity response on a plate generated by a dummy vibratory source ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Prokoshkin, Sergey, Dubinskiy, Sergey et Brailovski, Vladimir.
2019.
« Features of a nanosubgrained structure in deformed and annealed Ti–Ni SMA: A brief review ».
Shape Memory and Superelasticity, vol. 5, nº 4.
pp. 336-345.
Prokoshkin, Sergey, Dubinskiy, Sergey et Brailovski, Vladimir.
2019.
« Features of nanosubgrained structure in deformed and annealed Ti-Ni SMA ».
In International Conference on Shape Memory and Superelastic Technologies, SMST 2019; The Bodensee Forum (Konstanz, Germany, May 13-17, 2019)
pp. 189-190.
ASM International.
Prokoshkin, Sergey, Dubinskiy, Sergey, Korotitskiy, Andrey, Konopatsky, Anton, Sheremetyev, Vadim, Shchetinin, Igor, Glezer, Alexander et Brailovski, Vladimir.
2019.
« Nanostructure features and stress-induced transformation mechanisms in extremely fine-grained titanium nickelide ».
Journal of Alloys and Compounds, vol. 779.
pp. 667-685.
Proteau, Antoine, Tahan, Antoine et Thomas, Marc.
2019.
« Specific cutting energy: a physical measurement for representing tool wear ».
International Journal of Advanced Manufacturing Technology, vol. 103, nº 1-4.
pp. 101-110.
Proteau, Antoine, Thomas, Marc et Tahan, Antoine.
2019.
« Toward the quality prognostic of an aircraft engine workpiece in Inconel Alloy 625: case study and proposed system architecture ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 546-560.
INSA. Rahimnejad, Maedeh, Andrea, Christine, Charbonneau, Cindy, Demarquette, Nicole R. et Lerouge, Sophie. 2019. « Preliminary study towards a bioactive injectable hydrogel for bone tissue engineering and bioprinting ». Communication lors de la conférence : 35ième congrès annuel de la Société Canadienne des Biomatériaux (Québec, QC, Canada, 21-24 mai 2019). Rahimnejad, Maedeh, Labonté-Dupuis, Thierry, Demarquette, Nicole R. et Lerouge, Sophie. 2019. « Methods to assess the printability of thermosensitive hydrogels for extrusion-based bioprinting ». Communication lors de la conférence : 35ième congrès annuel de la Société Canadienne des Biomatériaux (Québec, QC, Canada, 21-24 mai 2019). Rezabeigi, Ehsan et Demarquette, Nicole R.. 2019. « Obtention of porous electrospun polymer fibers ». Communication lors de la conférence : EUPOC 2019 Electrospinning and related techniques: From design to production of advanced polymer materials and devices (Como, Italy, May 12-16, 2019).
Rezabeigi, Ehsan et Demarquette, Nicole R..
2019.
« Ultraporous membranes electrospun from nonsolvent-induced phase-separated ternary systems ».
Macromolecular Rapid Communications, vol. 40, nº 9.
Robin, Olivier, Berry, Alain, Kafui Amédin, Celse, Atalla, Noureddine, Doutres, Olivier et Sgard, Franck.
2019.
« Laboratory and in situ sound absorption measurement under a synthetized diffuse acoustic field ».
Building Acoustics, vol. 26, nº 4.
pp. 223-242.
Rodrigues, Samuel F., Siciliano, Fulvio, Aranas Jr., Clodualdo, Silva, Eden S., Reis, Gedeon S., Jahazi, Mohammad et Jonas, John J..
2019.
« Dynamic phase transformation behavior of a Nb-microalloyed steel during roughing passes at temperatures above the Ae3 ».
Metals, vol. 9, nº 3.
Rohart, V., Dubé, M. et Laberge Lebel, L..
2019.
« Improvement of the lap shear strength of resistance-welded thermoplastic composite joints using a silane sol-gel coating on the stainless-steel heating element ».
In ICCM22 : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2020)
pp. 4706-4714.
Melbourne, VIC : Engineers Australia.
Rohart, V., Dubé, M. et Laberge Lebel, L..
2019.
« Lap shear strength effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ».
SAMPE Journal, vol. 55, nº 3.
pp. 30-37.
Rousse, D. R..
2019.
« Les tables de ventilation pour l'élevage avicole : un outil désormais révolu ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Rousse, D. R..
2019.
« Échangeurs thermiques air-air en milieux nordiques : simulations et validation ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Rousse, D. R., Coulombe, F., Paradis, Pierre Luc et Gagné-Marcotte, G..
2019.
« Heat recovery systems in poultry houses operated in northern climates: A simple numerical model ».
In International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS) (Wroclaw, Poland, June 23-29, 2019)
pp. 2259-2271.
Institute of Thermal Technology.
Rousse, D. R., Coulombe, Frédéric et Paradis, Pierre-Luc.
2019.
« Échangeurs thermiques air-air en milieux nordiques : modèle de prédictions de la performance ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ. Rousse, D. R., Piché, P. et Haillot, D.. 2019. « Le point sur la serre de Kuujuaaq : ajout d'un système de stockage thermique ». Communication lors de la conférence : 6e Séminaire annuel OHMi Nunavik (Québec, QC, Canada, 11-13 février 2019).
Saadati, Mohammad, Edalat Nobarzad, Amir Keyvan et Jahazi, Mohammad.
2019.
« On the hot cracking of HSLA steel welds: Role of epitaxial growth and HAZ grain size ».
Journal of Manufacturing Processes, vol. 41.
pp. 242-251.
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert et Beauchamp, Yves.
2019.
« Comparison of density measurement methods for unidirectional flax-epoxy polymer composites ».
In European Conference on Multifunctional Structures (EMuS) (Barcelona, Spain, June, 11-12)
pp. 75-80.
International Centre for Numerical Methods in Engineering (CIMNE).
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert et Beauchamp, Yves.
2019.
« Tension and compression properties of unidirectional flax fibre-reinforced epoxy composites for modeling of machining processes ».
In 27th Canadian Congress of Applied Mechanics (CANCAM) (Sherbrooke, QC, Canada, May 27-30, 2019)
Saboktakin, A., Shahrouz, M., Vu-Khanh, T. et Bicerano, J..
2019.
« X-ray computed tomography characterization of 3D tufted twill textile composite for aerostructures ».
Journal of Harbin Institute of Technology (New Series), vol. 26, nº 3.
pp. 7-13.
Saidi, M. N., Songmene, V., Kouam, J. et Bahloul, A..
2019.
« Study of surface quality and dust particles emission and dispersion during dry polishing of granite ».
International Journal of Advanced Manufacturing Technology, vol. 104.
pp. 4675-4684.
Saint-Gaudens, Hugo, Nélisse, Hugues, Sgard, Franck, Laville, Frédéric et Doutres, Olivier.
2019.
« Comparison of different excitations to assess the objective occlusion effect measured on human subjects ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association. Saint-Gaudens, Hugo, Nélisse, Hugues, Sgard, Franck, Laville, Frédéric et Doutres, Olivier. 2019. « Investigating the effect of excitation type and sound attenuation on the occlusion effect induced by hearing protection devices ». Affiche présentée lors de la conférence : 2019 NHCA annual conference (Grapevine, TX, USA, Feb. 06-09, 2019).
Samad, Abdallah, Morency, François et Volat, Christophe.
2019.
« Performance and heat transfer calculation for rotors using the unsteady vortex lattice method ».
In 65rd Aeronautics Conference : AERO2019 Proceedings (Laval, QC, Canada, May 14-16, 2019)
Canadian Aeronautics and Space Institute. Samoilenko, Mykhailo, Seers, Patrice, Terriault, Patrick et Brailovski, Vladimir. 2019. « Design, manufacture and testing of porous materials with ordered and random porosity: Application to porous medium burner ». Affiche numéro 35 présentée lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019).
Samoilenko, Mykhailo, Seers, Patrice, Terriault, Patrick et Brailovski, Vladimir.
2019.
« Design, manufacture and testing of porous materials with ordered and random porosity: application to porous medium burners ».
Applied Thermal Engineering, vol. 158.
Sarafan, Sheida, Wanjara, Priti, Lévesque, Jean-Benoît, Gholipour, Javad, Champliaud, Henri et Mathieu, Louis.
2019.
« Residual stresses, microstructure, and mechanical properties of EB-Welded 90-mm-Thick UNS S41500 martensitic stainless steel after PWHT ».
Materials Performance and Characterization, vol. 8, nº 4.
pp. 648-663.
Sgard, Franck, Carillo, Kévin et Doutres, Olivier.
2019.
« A 2D axisymmetric finite element model to assess the contribution of in-ear hearing protection devices to the objective occlusion effect ».
In InterNoise 2019 : Noise Control for a Better Environment (Madrid, Spain, June 16-19, 2019)
pp. 2494-2505.
Institute of Noise Control Engineering.
Shafiee, Ahad, Moon, Jongun, Kim, Hyoung Seop, Jahazi, Mohammad et Nili-Ahmadabadi, Mahmoud.
2019.
« Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy ».
Materials Science and Engineering: A, vol. 749.
pp. 271-280.
Sheremet'ev, V. A., Kudryashova, A. A., Dinh, Xuan Ta, Galkin, S. P., Prokoshkin, S. D. et Brailovskii, V..
2019.
« Advanced technology for preparing bar from medical grade Ti-Zr-Nb superelastic alloy based on combination of radial-shear rolling and rotary forging ».
Metallurgist, vol. 63, nº 1-2.
pp. 51-61.
Sheremetyev, V., Kudryashova, A., Cheverikin, V., Korotitskiy, A., Galkin, S., Prokoshkin, S. et Brailovski, V..
2019.
« Hot radial shear rolling and rotary forging of metastable beta Ti-18Zr-14Nb (at. %) alloy for bone implants: microstructure, texture and functional properties ».
Journal of Alloys and Compounds.
pp. 320-326.
Sheremetyev, V., Kudryashova, A., Derkach, M., Lukashevich, K., Andreev, V., Galkin, S., Prokoshkin, S. et Brailovski, V..
2019.
« The effect of combined thermomechanical treatment on the structure, phases and hardness of a superelastic Ti-Zr-Nb bar stock ».
In 6th International Symposium Bulk Nanomaterials: from fundamentals to innovations (BNM-2019), 25-27 Sept. 2019 (Ufa, Russia, Sept. 25-27, 2019)
Coll. « IOP Conference Series: Materials Science and Engineering », vol. 672.
IOP Publishing.
Sheremetyev, V., Kudryashova, A., Galkin, S., Andreev, V., Prokoshkin, S. et Brailovski, V..
2019.
« Superelastic Ti-Zr-Nb alloy for spinal rods: technology, microstructure, texture, and functional properties ».
In International Conference on Shape Memory and Superelastic Technologies, SMST 2019: The Bodensee Forum (Konstanz, Germany, May 13-17, 2019)
pp. 12-13.
ASM International.
Sheremetyev, Vadim, Ijaz, Muhammad Farzik, Kudryashova, Anastasia, Konopatsky, Anton S., Prokoshkin, Sergey et Brailovski, Vladimir.
2019.
« Characterization of the superelastic and structural characteristics of β-Ti alloys by strain-controlled cycling after thermomechanical processing and subsequent ageing ».
Journal of Metastable and Nanocrystalline Materials, vol. 31.
pp. 43-50.
Shnfir, Mohamed, Olufayo, Oluwole A., Jomaa, Walid et Songmene, Victor.
2019.
« Machinability study of hardened 1045 steel when milling with ceramic cutting inserts ».
Materials, vol. 12, nº 23.
Slamani, Mohamed et Chatelain, Jean-François.
2019.
« Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs) ».
Journal of Manufacturing Processes, vol. 37.
pp. 177-195.
Slamani, Mohamed, Chatelain, Jean-Francois et Hamedanianpour, Hossein.
2019.
« Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers ».
International Journal of Material Forming, vol. 12, nº 3.
pp. 331-353.
Slim, H. et Nadeau, S..
2019.
« The need for a systemic perspective in aircraft deicing: a proposal of a risk and safety analysis method combining FRAM and fuzzy logic ».
In CASI-AERO 2019 (Laval, QC, Canada, 14-16 mai 2019)
Slim, Hussein et Nadeau, Sylvie.
2019.
« A proposal for a predictive performance assessment model in complex sociotechnical systems combining fuzzy logic and the Functional Resonance Analysis Method (FRAM) ».
American Journal of Industrial and Business Management, vol. 9, nº 6.
pp. 1345-1375.
Soldatenko, A. S., Karachevtseva, M. A., Sheremetyev, V. A., Kudryashova, A. A., Arkhipova, A. Y., Andreev, V. A., Prokoshkin, S. D., Brailovski, V., Moisenovich, M. M. et Shaitan, K. V..
2019.
« Features of in vitro interaction of osteoblast-like MG-63 cells with the surface of Ti-Zr-Nb shape memory alloys ».
Moscow University Biological Sciences Bulletin, vol. 74, nº 4.
pp. 250-255. Songmene, Victor. 2019. « Comité R&D aluminium : Enjeux pour l'usinage ». Communication lors de la conférence : Séminaire, CMQ, Organisé par Alu-Québec en collaboration avec CeAL (Trois-Rivières, QC, Canada, 31 janv. 2019). Songmene, Victor. 2019. « Progress on fine and ultrafine particles emission, dispersion & control during machining : cases of metals, composite, woods and granite ». Communication lors de la conférence : 5th Edition of International Conference on Occupational Health and Public Safety (Berlin, Germany, Apr. 23-24, 2019). Songmene, Victor. 2019. « Usinage 4.0 : optimisation des performances d'usinage ». Communication lors de la conférence : Séminaire Usinage 4.0, CTA Saint-Hubert, organisé par Réseau-TransA1 en collaboration avec Alu-Québec, CeAl et CRITM (Saint-Hubert, QC, Canada, 01 oct. 2019). Soucy, Yvan, Joule, Julien et Liu, Zhaoheng. 2019. « Investigation of force limited vibration through testing of payloads mounted on a rover and a satellite ». Communication lors de la conférence : Spacecraft and Launch Vehicle Dynamic Environments Workshop (SCLV) (El Segundo, CA, USA, June 4-6, 2019).
Soulaïmani, A. et Das, R..
2019.
« Global sensitivity analysis in the design of rockfill dams ».
In Proceedings of the ICOLD 2019 Symposium, (ICOLD 2019) / Publications du symposium CIGB 2019 (Ottawa, ON, Canada, Juin 9-14 2019)
pp. 950-962.
Taylor & Francis Group.
Sow, Abdoulaye, Mehrtash, Mostafa, Rousse, Daniel R. et Haillot, Didier.
2019.
« Economic analysis of residential solar photovoltaic electricity production in Canada ».
Sustainable Energy Technologies and Assessments, vol. 33.
pp. 83-94.
Stanescu, Magdalena, Kajl, Stanislaw et Lamarche, Louis.
2019.
« Oversizing and HVAC system operation ».
In International Conference on Advances in Energy Systems and Environmental Engineering (ASEE) (Wroclaw, Poland, June 09-12, 2019)
Coll. « E3S Web of Conferences », vol. 116.
EDP Sciences.
Sterba, Manon, Aubin, Carl-Éric, Wagnac, Eric, Fradet, Leo et Arnoux, Pierre-Jean.
2019.
« Effect of impact velocity and ligament mechanical properties on lumbar spine injuries in posterior-anterior impact loading conditions: a finite element study ».
Medical and Biological Engineering and Computing, vol. 57, nº 6.
1381–1392.
St-Onge, David.
2019.
« Robotic art comes to the engineering community [Art and Robotics] ».
IEEE Robotics and Automation Magazine, vol. 26, nº 3.
pp. 103-104.
St-Onge, David, Levillain, Florent, Zibetti, Elisabetta et Beltrame, Giovanni.
2019.
« Collective expression: how robotic swarms convey information with group motion ».
Paladyn, Journal of Behavioral Robotics, vol. 10, nº 1.
pp. 418-435.
St-Pierre, R. et Rousse, D. R..
2019.
« Recommandations pour des habitations durables en climat nordique québécois ».
In XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-19 juin 2019)
CIFQ.
Sun, Binhan, Ma, Yan, Vanderesse, Nicolas, Varanasi, Rama Srinivas, Song, Wenwen, Bocher, Philippe, Ponge, Dirk et Raabe, Dierk.
2019.
« Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: role of the austenite-ferrite interface ».
Acta Materialia, vol. 178.
pp. 10-25.
Sun, Yulan et Thomas, Marc.
2019.
« Semi-active torsional vibrations control of a rotor using a smart ER dynamic absorber ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 636-647.
INSA.
Sylla, A., Ayachi, R., Aldanondo, M., Vareilles, E., Beauregard, Y. et Pitiot, P..
2019.
« Towards a metric between engineering to order and assemble/make to order products in configuration situations ».
In IEEE International Conference on Industrial Engineering and Engineering Management (Macao, China, Dec. 15-18, 2019)
pp. 379-383.
IEEE.
Tabaie, Seyedmohammad, Shahriari, Davood, Plouze, Cléa, Devaux, Alexandre, Cormier, Jonathan et Jahazi, Mohammad.
2019.
« Hot ductility behavior of AD730™ nickel-base superalloy ».
Materials Science and Engineering: A, vol. 766.
Tagawa, Gitsuzo B. S., Huck, Violaine, Morency, François et Beaugendre, Héloïse.
2019.
« Shear-layer adapted DDES analysis of 3D stalled flow over an iced airfoil ».
In AIAA Aviation 2019 Forum (Dallas, TX, USA, June 17-21, 2019)
Coll. « AIAA Paper », vol. AIAA 2019-3308.
Reston, VA, USA : AIAA.
Talbi, F., David, E., Malec, D. et Mary, D..
2019.
« Dielectric properties of polyesterimide/SiO nanocomposites ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Richland, WA, USA, Oct. 20-23, 2019)
pp. 66-69.
Institute of Electrical and Electronics Engineers Inc..
Terriault, Patrick.
2019.
« Apprentissage actif fondé sur la classe inversée dans un cours de génie mécanique ».
In Proceedings 2019 Canadian Engineering Education Association (CEEA-ACEG19) Conference (Ottawa, ON, Canada, June 9-12, 2019)
Canadian Engineering Education Association. Thieulin, Valentin, Rivest, Louis et Tahan, Antoine. 2019. « Investigation des performances in situ de la numérisation d’une tuyauterie industrielle par photogrammétrie et lumière structurée ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019).
Thon, Aurélien et Bélanger, Pierre.
2019.
« EMAT design for minimum remnant thickness gauging using high order shear horizontal modes ».
Ultrasonics, vol. 95.
pp. 70-78.
Timercan, Anatolie, Brailovski, Vladimir, Petit, Yvan, Lussier, Bertrand et Seguin, Bernard.
2019.
« Personalized 3D-printed endoprostheses for limb sparing in dogs: modeling and in vitro testing ».
Medical Engineering and Physics, vol. 71.
pp. 17-29.
Toledano, A., Morency, F., Weiss, J., Broughton, C. et Benmeddour, A..
2019.
« Improvement of wall-corrections at the national research council's trisonic wind tunnel ».
Journal of Aircraft, vol. 56, nº 6.
pp. 2299-2308. Tordini, Francesco, Dumoulin, Romain, Cossette, Isabelle et Voix, Jérémie. 2019. « The hearing-care platform : A set of tools for self-assessment of noise exposure ». Affiche présentée lors de la conférence : World Hearing Day 2019: Check your hearing! (Montréal, QC, Canada, Mar. 22, 2019).
Torres Medina, Yaniel, Nadeau, Sylvie et Landau, Kurt.
2019.
« Application of human errors analysis in manufacturing: A proposed intervention framework and techniques selection ».
In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65.
Dortmund : GfA-Press.
Torres Medina, Yaniel, Nadeau, Sylvie et Landau, Kurt.
18 novembre 2019.
« Assembly guidance systems in aerospace manufacturing ».
[Article de recherche]. Substance ÉTS.
Torres Medina, Yaniel, Nadeau, Sylvie et Landau, Kurt.
18 novembre 2019.
« Des systèmes pour guider l’assemblage en fabrication aérospatiale ».
[Article de recherche]. Substance ÉTS.
Touahir, Kamel, Bilek, Ali, Bocher, Philippe et Beldi, Mustapha.
2019.
« Experimental and numerical analysis of the fields of the frozen stresses in an epoxy sphere using the stress-freezing method and mechanical slicing ».
Journal of Materials and Engineering Structures, vol. 6, nº 2.
Touazine, Heithem, Chadha, Kanwal, Jahazi, Mohammad et Bocher, Philippe.
2019.
« Characterization of subsurface microstructural alterations induced by hard turning of Inconel 718 ».
Journal of Materials Engineering and Performance, vol. 28, nº 11.
pp. 7016-7024.
Tran, Ngoc Hai, Le, Cung et Ngo, Anh Dung.
2019.
« An investigation on speed control of a spindle cluster driven by hydraulic motor: application to metal cutting machines ».
International Journal of Rotating Machinery, vol. 2019.
Tremblay, Nicolas, Gauthier, Baptiste et Belanger, Pierre.
2019.
« Feasibility of structural health monitoring in a composite plate using omnidirectional SH0 transduction ».
In 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018)
Coll. « AIP Conference Proceedings », vol. 2102.
USA : AIP Publishing. Valentin, M., Frreira Maracajà, E., Monfet, D. et Kajl, S.. 2019. « Modélisation et calibration d'un système de récupération de chaleur sur les refroidisseurs ». Communication lors de la conférence : XIVème Colloque International Franco-Québécois sur l’Énergie : Énergies durables (Baie St-Paul, QC, Canada, 16-19 juin 2019).
Valentin, Olivier, Vij, Saumya et Voix, Jeremie.
2019.
« Development of a real-time EOG-based acoustical beamformer algorithm for binaural hearing devices ».
Canadian Acoustics = Acoustique Canadienne, vol. 47, nº 2.
pp. 41-48.
Van der Maren, S., Duclos, C., Dumont, M., Blais, H., Daoust, J., Lina, J. M., Bernard, F., Menon, D. K., Carrier, J. et Gosselin, N..
2019.
« Sleep-wake cycle recovery after moderate to severe traumatic brain injury: Are ultradian rhythms involved? ».
[Résumé d'une communication à une conférence]. Sleep Medicine, vol. 64.
S398.
Venditti, Tony, Tran, Nguyen Duy Phuong et Ngo, Anh Dung.
2019.
« Expert elicitation methodology in the risk analysis of an industrial machine ».
In International Conference on Safety Management and Human Factors (AHFE) (Orlando, FL, USA, July 21-15, 2018)
Coll. « Advances in Intelligent Systems and Computing », vol. 791.
pp. 160-167.
Springer Verlag.
Viallet, G. et Voix, J..
2019.
« An earcanal-sizing tool at the tip of your fingers ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Vinches, Ludwig, Tuduri, Ludovic et Hallé, Stéphane.
2019.
« Modeling airborne nanoparticle filtration through a complete structure of non-woven material used in protective apparel ».
Textile Research Journal, vol. 89, nº 15.
pp. 3024-3033. Voix, Jérémie. 2019. « Acoustic workshop for high school students at Université du Québec (ÉTS) ». Communication lors de la conférence : Workshop on education in acoustics (CIRMMT) (Montréal, QC, Canada, Mar. 21, 2019). Voix, Jérémie. 2019. « Formation continue - Équipements de monitoring et protection auditive pour musiciens - École d'orthophonie et d'audiologie ». Communication lors de la conférence : Université de Montréal - Formation continue (Montréal, QC, Canada, 11 déc. 2019).
Voix, Jeremie.
2019.
« Hearing protectors fit-testing using smartphones: Preliminary data ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 47, nº 3.
pp. 22-23. Voix, Jérémie. 2019. « ICA : early career opportunities in hearing and spoken language ». Communication lors de la conférence : 23rd International Congress on Acoustics (ICA) (Aachen, Germany, Sept. 09-13, 2019).
Voix, Jérémie.
2019.
« Révolution silencieuse : Ici même au Québec ».
Travail et Santé, vol. 35, nº 1.
p. 36. Voix, Jérémie. 2019. « The connected protected worker at the age of IoT ». Communication lors de la conférence : École d’Été Industrie 4.0 = Summer School Industry 4.0 (Montréal, QC, Canada, Aug. 26-28, 2019). Voix, Jérémie. 2019. « The ear at the age of IoT ». Communication lors de la conférence : 23rd International Congress on Acoustics (ICA) (Aachen, Germany, Sept. 03-19, 2019). Voix, Jérémie. 2019. « The ear at the age of IoT ». Communication lors de la conférence : Japanese French Week on Mechatronics (JFWM 2019) (Annecy, France, Sept. 12-16, 2019).
Voix, Jérémie.
2019.
« The ear in the age of IoT ».
In Proceedings of the 23rd International Congress on Acoustics (Aachen, Germany, Sept. 09-13, 2019)
Voix, Jérémie.
2019.
« Votre président vieux de 2 ans vous parle... ».
[Éditorial]. Canadian Acoustics = Acoustique canadienne, vol. 47, nº 4.
pp. 3-4. Voix, Jérémie. 2019. « Worker's hearing protection at the age of IoT ». Communication lors de la conférence : École d’Été Industrie 4.0 = Summer School Industry 4.0 (Montréal, QC, Canada, 26-28 août 2019).
Voix, Jérémie, Carillo, Kévin, Bouchard-Roy, Jacob, Saint-Gaudens, Hugo, Crétot-Richert, Gabrielle et Bouserhal, Rachel.
2019.
« Classe techno "Bruit": Acoustic workshop for high school students at Université du Québec (ÉTS) ».
In Proceedings of the 26th International Congress on Sound and Vibration (ICSV26) (Montreal, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Voix, Jérémie et Sgard, Franck.
2019.
« ICSV26: Montréal Bridges ».
[Éditorial]. International Journal of Acoustics and Vibration, vol. 24, nº 2.
p. 198.
Voix, Jérémie, Sgard, Franck et Dabin-Voix, Nathalie.
2019.
« The 26th international congress on sound and vibration: Behind the scene = Le 26eme International Congress on Sound and Vibration: Derriere la scene ».
Canadian Acoustics = Acoustique Canadienne, vol. 47, nº 4.
pp. 35-46. Voix, Jérémie et Viallet, Guilhem. 2019. « Earcanal sizing: what does your little finger tell you? ». Affiche présentée lors de la conférence : National Hearing Conservation Association Annual Conference 2019 (Grapevine, TX, USA, Feb. 07-09, 2019).
Vu, Ngoc-Hung, Pham, Xuan-Tan, François, Vincent et Cuillière, Jean-Christophe.
1 mai 2019.
« Behavior Characterization of Large Dimension Composite Plate ».
[Article de recherche]. Substance ÉTS.
Vu, Ngoc-Hung, Pham, Xuan-Tan, François, Vincent et Cuillière, Jean-Christophe.
1 mai 2019.
« Caractérisation du comportement d’une plaque composite de grande dimension ».
[Article de recherche]. Substance ÉTS.
Vu, Ngoc-Hung, Pham, Xuan-Tan, Francois, Vincent et Cuillière, Jean-Christophe.
2019.
« Characterization of multilayered carbon-fiber-reinforced thermoplastic composites for assembly process ».
Journal of Thermoplastic Composite Materials, vol. 32, nº 5.
pp. 673-689.
Vu, Ngoc-Hung, Pham, Xuan-Tan, François, Vincent et Cuillière, Jean-Christophe.
2019.
« Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process ».
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 233, nº 17.
pp. 6167-6176.
Wagnac, Eric, Mac-Thiong, Jean-Marc, Arnoux, Pierre-Jean, Desrosiers, Jean-Michel, Ménard, Anne-Laure et Petit, Yvan.
2019.
« Traumatic spinal cord injuries with fractures in a Québec level I trauma center ».
Canadian Journal of Neurological Sciences, vol. 46, nº 6.
pp. 727-734.
Wingert, Loïc, Cloutier, Yves, Hallé, Stéphane, Bahloul, Ali, Tessier, Dominic, Giraudel, Jean-Luc, Dolez, Patricia et Tuduri, Ludovic.
2019.
« Filtering performances of 20 protective fabrics against solid aerosols ».
Journal of Occupational and Environmental Hygiene, vol. 16, nº 8.
pp. 592-606.
Wuthrich, Rolf et Hof, Lucas A..
2019.
« Low batch size production of glass products requiring micrometer precision ».
[Article de conférence]. IFAC-PapersOnLine, vol. 52, nº 10.
pp. 319-322.
Xing, Kanglin, Rimpault, Xavier, Mayer, J. R. R., Chatelain, Jean-François et Achiche, Sofiane.
2019.
« Five-axis machine tool fault monitoring using volumetric errors fractal analysis ».
CIRP Annals, vol. 68, nº 1.
pp. 555-558.
Xing, Kanglin, Rimpault, Xavier, Mayer, J. R. R., Chatelain, Jean-François et Achiche, Sofiane.
2019.
« Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures ».
In 7th CIRP Global Web Conference (CIRPe) (En ligne, Oct. 16-19, 2019)
Coll. « Procedia CIRP », vol. 86.
pp. 145-150.
Berlin, Germany : Elsevier B.V..
Xu, Huiyang, Sgard, Franck, Wagnac, Eric et De Guise, Jacques.
2019.
« Development of an entire human head finite element model based on in-vivo medical images for investigation of sound transmission ».
In 26th International Congress on Sound and Vibration (ICSV) (MontreaL, QC, Canada, July 07-11, 2019)
Canadian Acoustical Association.
Yakhya, Saleh, Ernez, Sami et Morency, François.
2019.
« Computational fluid dynamics investigation of transient effects of aircraft ground deicing jets ».
Journal of Thermophysics and Heat Transfer, vol. 33, nº 1.
pp. 117-127.
Yan, C., Rousse, D. et Glaus, Mathias.
2019.
« Multi-criteria decision analysis ranking alternative heating systems for remote communities in Nunavik ».
Journal of Cleaner Production, vol. 208.
pp. 1488-1497.
Zarour, Djamal, Thomas, Marc et Meziani, Salim.
2019.
« Diagnosis of bearing defects by variational modes decomposition from vibratory and acoustic emission measurements ».
International Journal of Vehicle Noise and Vibration, vol. 15, nº 1.
pp. 21-41.
Zemzem, Mohamed, Vinches, Ludwig et Hallé, Stephané.
2019.
« Influence of processing parameters on barrier properties of nitrile rubber/nanoclay nanocomposite membrane against organic solvent ».
Journal of Polymer Research, vol. 26, nº 3.
Zhang, Chunping, Loucif, Abdelhalim, Tremblay, Rami et Jahazi, Mohammad.
2019.
« Influence of non-uniform temperature distribution of the mold on solidification behavior in large-size steel ingots ».
In Proceedings of the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2019) (Toronto, ON, Canada, Aug. 13-15, 2019)
pp. 573-581.
Association for Iron & Steel Technology.
Zhu, Limbo, Bouzid, Abdel-Hakim et Hong, Jun.
2019.
« A novel methodology to optimize the tightening sequence in bolted flange joints ».
In ASME 2019 Pressure Vessels and Piping Conference, PVP 2019 (San Antonio, TX, USA, July 14-19, 2019)
American Society of Mechanical Engineers (ASME).
Zhukova, Yulia, Korobkova, Anastasia, Dubinskiy, Sergey, Pustov, Yury, Konopatsky, Anton, Podgorny, Dmitry, Filonov, Mikhail, Prokoshkin, Sergey et Brailovski, Vladimir.
2019.
« The electrochemical and mechanical behavior of bulk and porous superelastic Ti-Zr-based alloys for biomedical applications ».
Materials, vol. 12, nº 15.
Zhuldybina, M., Ropagnol, X., Bois, C., Zednik, R. et Blanchard, F.. 2019. « Dual-wavelength terahertz spectroscopy ». Communication lors de la conférence : 21st Photonics North Conference (Quebec, QC, Canada, May 21-23, 2019). Zhuldybina, M., Ropagnol, X., Trudeau, C., Bolduc, M., Zednik, R. J. et Blanchard, F.. 2019. « Terahertz quality control pattern for printed electronic devices ». Affiche présentée lors de la conférence : LACIME First Annual Congress (Montreal, QC, Canada, Fev. 21, 2019). Zhuldybina, Mariia, Ropagnol, X., Trudeau, C., Bolduc, M., Zednik, R. J. et Blanchard, F.. 2019. « Quality control of printed electronic devices ». Affiche présentée lors de la conférence : Women in Physics = Femmes en Physique (Montreal, QC, Canada, June 25-29, 2019). Zhuldybina, Mariia, Ropagnol, Xavier, Trudeau, Charles, Bolduc, Martin, Zednik, Ricardo J. et Blanchard, François. 2019. « Caractérisation d'électronique imprimable ». Affiche présentée lors de la conférence : 87e Congrès de l'Association francophone pour le savoir (ACFAS) (Gatineau, QC, Canada, 28-30 mai 2019).
Zhuldybina, Mariia, Ropagnol, Xavier, Trudeau, Charles, Bolduc, Martin, Zednik, Ricardo J. et Blanchard, François.
23 avril 2019.
« Caractérisation de l’électronique imprimable au moyen des ondes térahertz ».
[Article de recherche]. Substance ÉTS.
Zhuldybina, Mariia, Ropagnol, Xavier, Trudeau, Charles, Bolduc, Martin, Zednik, Ricardo J. et Blanchard, François.
23 avril 2019.
« Characterizing Printed Electronic Devices Using Terahertz Waves ».
[Article de recherche]. Substance ÉTS.
Zhuldybina, Mariia, Ropagnol, Xavier, Trudeau, Charles, Bolduc, Martin, Zednik, Ricardo J. et Blanchard, François.
2019.
« Contactless in situ electrical characterization method of printed electronic devices with terahertz spectroscopy ».
Sensors, vol. 19, nº 3.
Zinsalo, Joël M. et Lamarche, Louis.
2019.
« Scénario d'injection et de récupération pour améliorer la performance d'un système géothermique avec fractures multiples ».
In XIVème Colloque International Franco-Québécois en Énergie : Énergies durables (CIFQ2019) (Baie St-Paul, QC, Canada, 16-20 juin 2019)
CIFQ.
Zongo, Floriane, Tahan, Antoine et Brailovski, Vladimir.
2019.
« Scale, material concentration, stress relief and part removal effects on the dimensional behaviour of selected AlSi10Mg components manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 2.
Zwaida, Tarek Abu, Beauregard, Yvan et Elarroudi, Khalil.
2019.
« Comprehensive literature review about drug shortages in the canadian hospital's pharmacy supply chain ».
In International Conference on Engineering, Science, and Industrial Applications (ICESI) (Tokyo, Japan, Aug. 22-24, 2019)
Institute of Electrical and Electronics Engineers Inc.. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau