| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
L'affiliation est "Génie mécanique"Nombre de documents archivés : 347.
Herath, Damith et St-Onge, David, éds.
2022.
« Foundations of Robotics : A Multidisciplinary Approach with Python and ROS ».
Singapore : Springer Nature Singapore. 543 p.
Abattan, Spéro Franck, Lavoue, Jérôme, Hallé, Stéphane, Bahloul, Ali, Drolet, Daniel et Debia, Maximilien.
2022.
« Predicting first-order evaporation rate constant alpha ( α ) from small spills of organic solvents in a controlled environment ».
Journal of Occupational and Environmental Hygiene, vol. 19, nº 4.
pp. 210-222.
Abdelaziz, Mohamed H., Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy H..
2022.
« Mechanical performance and precipitation behavior in Al-Si-Cu-Mg cast alloys: Effect of prolonged thermal exposure ».
Materials, vol. 15, nº 8.
Abu Zwaida, Tarek, Elaroudi, Khalil et Beauregard, Yvan.
2022.
« The challenges of drug shortages in the Canadian hospital pharmacy supply chain : A systematic literature review ».
Journal of Public Health, vol. 30, nº 11.
pp. 2593-2604.
Adjoul, Oussama, Benfriha, Khaled, Mahiddini, Brahim, Bouzid, Abdel-Hakim et Benabid, Yacine.
2022.
« New approach for the conjoint optimization of the design and manufacturing by integration of production costs ».
In Proceedings M2D2022 - 9th International Conference Mechanics and Materials in Design, Theory, Experiments and Applications in Engineering and Biomechanics (Funchal, Madeira, Portugal, June 26-30, 2022)
pp. 591-594.
INEGI-FEUP.
Ahmadpour, Elham, Halle, Stephan, Valois, Isabelle, Ryan, Patrick Eddy, Haddad, Sami, Rodriguez, Manuel, El Aroussi, Badr, Simard, Sabrina, Delpla, Ianis, Proulx, François, Tardif, Robert et Debia, Maximilien.
2022.
« Temporal and spatial variations in the levels of prominent airborne disinfection by-products at four indoor swimming pools ».
Journal of Occupational and Environmental Hygiene, vol. 19, nº 4.
pp. 185-196.
Al Aela, Amhmed M., Kenne, Jean-Pierre et Mintsa, Honorine A..
2022.
« Adaptive neural network and nonlinear electrohydraulic active suspension control system ».
Journal of Vibration and Control, vol. 28, nº 3-4.
pp. 243-259.
Alqudsi, Alhaytham Y., Ghunem, Refat A. et David, Éric.
2022.
« The viability of the filler barrier effect during the DC dry-band arcing on silicone rubber ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 29, nº 5.
pp. 1873-1881. Amaral, R., Nguyen, H.-L., Lerouge, S., Zehtabi, F., Haroutounian, A., Vikkula, M. et Soulez, G.. 2022. « Safety-efficacy of percutaneous injection of chitosan or chitosan embolizing and sclerosing gels in a TIE2-associated VM xenograft mouse model ». Communication lors de la conférence : International Society for the Study of Vascular Anomalies (ISSVA) (Vancouver, BC, Canada, May 10-13, 2022). Amaral, R., Nguyen, H.-L., Lerouge, S., Zehtabi, F., Haroutounian, A., Vikkula, M. et Soulez, G.. 2022. « Safety-efficacy of percutaneous injection of chitosan or chitosan embolizing and sclerosing gels in a TIE2-associated VM xenograft mouse model ». Communication lors de la conférence : Canadian Association of Radiologists Annual Scientific Meeting (CAR) (En ligne, Apr. 06-10, 2022). Amjadian, A., Chatelain, J-F. et Shariari, D.. 2022. « Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ». Communication lors de la conférence : IAARHIES 280th International Conference on Engineering & Technology, ICET (Vancouver, BC, Canada, Feb. 24-25, 2022).
Amjadian, Amir, Chatelain, Jean-François et Shahriari, Davood.
2022.
« Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ».
Journal of Advanced Research in Engineering & Technology, vol. 6, nº 1.
pp. 1-5.
Amor, Sabrine Ben, Zongo, Floriane, Louhichi, Borhen, Tahan, Antoine et Brailovski, Vladimir.
2022.
« Dimensional deviation prediction model based on scale and material concentration effects for LPBF process ».
In 1st International Additive Manufacturing Conference, IAM (Lisbon, Portugal, Oct. 19-20, 2022)
American Society of Mechanical Engineers.
Amouzou, Koffi Novignon, Romero, Alberto Alonso, Sengupta, Dipankar, Mishra, Satyendra Kumar, Richard-Denis, Andréane, Mac-Thiong, Jean-Marc, Petit, Yvan, Lina, Jean-Marc et Ung, Bora.
2022.
« Development of high refractive index polydimethylsiloxane waveguides doped with benzophenone via solvent-free fabrication for biomedical pressure sensing ».
Photonics, vol. 9, nº 8.
Arkhazloo, Nima Bohlooli, Bazdidi-Tehrani, Farzad, Jadidi, Mohammad, Morin, Jean-Benoit et Jahazi, Mohammad.
2022.
« Determination of temperature distribution during heat treatment of forgings: Simulation and experiment ».
Heat Transfer Engineering, vol. 43, nº 12.
pp. 1041-1064.
Arslane, Mustapha, Slamani, Mohamed, Aoufi, Belkacem et Chatelain, Jean-François.
2022.
« Locator placement optimization during machining turbine blades using genetic algorithm ».
In ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
pp. 1169-1173.
Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim.
2022.
« On the modeling of gas and liquid leaks through packed glands ».
Journal of Pressure Vessel Technology, vol. 144, nº 5.
Ayachi, Rania, Guillon, Delphine, Aldanondo, Michel, Vareilles, Elise, Coudert, Thierry, Beauregard, Yvan et Geneste, Laurent.
2022.
« Risk knowledge modeling for offer definition in customer-supplier relationships in Engineer-To-Order situations ».
Computers in Industry, vol. 138.
Azzaz, Riadh, Kaveh, Kianoosh, Morin, Jean-Benoit, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira. 2022. « Slag characterization regarding refractory wear in EAF steelmaking route ». Affiche présentée lors de la conférence : 61st Annual Conference of Metallurgists (COM) (Montreal, QC, Canada, Aug. 21-24, 2022).
Bahri, Haithem, Songmene, Victor et Kouam, Jules.
2022.
« Experimental investigation on part quality and dust emission during minimum quantity lubricated (MQL) edge finishing of granite ».
Micromachines, vol. 13, nº 10.
Bailly, Nicolas, Honore, Sarah, Petit, Yvan, Naaim, Alexandre, Muller, Antoine et Wei, Wei. 2022. « E-scooter crash scenario and kinematics: Analysis of 112 crash videos ». Communication lors de la conférence : 27th Congress of the European Society of Biomechanics (ESB) (Porto, Portugal, June 26-29, 2022).
Baranova, Alexandra, Dubinskiy, Sergey, Tabachkova, Natalia, Prokoshkin, Sergey et Brailovski, Vladimir.
2022.
« Kinetic features of the isothermal ω-phase formation in superelastic Ti-Nb-Zr alloys ».
Materials Letters, vol. 325.
Barroeta Robles, J., Dubé, M., Hubert, P. et Yousefpour, A..
2022.
« Repair of thermoplastic composites: an overview ».
Advanced Manufacturing: Polymer and Composites Science, vol. 8, nº 2.
pp. 68-96.
Barroeta Robles, J., Guthrie, A., Dubé, M., Hubert, P. et Yousefpour, A..
2022.
« An approach to the repair of thermoplastic composites using resistance welding with a hybrid heating element ».
In International SAMPE Technical Conference (Charlotte, NC, USA, May 23-26, 2022)
Society for the Advancement of Material and Process Engineering.
Beaudoin, Étienne J., Kubaski, Maurício M., Samara, Mazen, Zednik, Ricardo J. et Demarquette, Nicole R..
2022.
« Scaled-up multi-needle electrospinning process using parallel plate auxiliary electrodes ».
Nanomaterials, vol. 12, nº 8.
Beaugendre, H., Chan, A., Gallice, G., Loubère, R., Maire, P. H., Morency, F. et Vigier, T..
2022.
« Multidimensional aware Riemann solver for the Eulerian droplet equation system ».
In Eleventh International Conference on Computational Fluid Dynamics (ICCFD) (Maui, HI, USA, July 11-15, 2022)
Beausejour, Marie-Helene, Petit, Yvan, Wagnac, Eric, Melot, Anthony, Troude, Lucas et Arnoux, Pierre-Jean.
2022.
« Cervical spine injury response to direct rear head impact ».
Clinical Biomechanics, vol. 92.
Beauséjour, Marie-Hélène, Wagnac, Éric, Arnoux, Jean-Pierre, Mac Thiong, Jean-Marc et Petit, Yvan. 2022. « Finite element modeling of the post-traumatic cervical spine and spinal cord ». Communication lors de la conférence : 24th International Congress on Snowsports Trauma and Safety and 37th Congres of the International Society for Snowsports Medicine (ISSS-SITEHMS) (Serre-Chevalier, France, Mar. 27-Apr. 02, 2022).
Beauséjour, Marie-Hélène, Wagnac, Eric, Arnoux, Pierre Jean, Mac Thiong, Jean-Marc et Petit, Yvan.
2022.
« Numerical investigation of spinal cord injury after flexion-distraction injuries at the cervical spine ».
Journal of Biomechanical Engineering, vol. 144, nº 1.
Bechara, H., Zemouri, R., Tahan, A., Kedjar, B., Merkhouf, A. et Al-haddad, K..
2022.
« Non-invasive anomaly diagnosis for hydro electrical generators rotor inter-turn short-circuit detection using stray flux and the VAE ».
In International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022)
pp. 1855-1861.
Piscataway, NJ, USA : IEEE.
Belhaou, Meriem, Laghzale, Nor Eddine et Bouzid, Hakim.
2022.
« Analysis of plastically deformed functionally graded pressurized thick cylinder ».
Arab Journal of Basic and Applied Sciences, vol. 29, nº 1.
pp. 372-381.
Belhaou, Meriem, Laghzale, Nor Eddine et Bouzid, Hakim.
2022.
« Residual stress in ceramic–metal tubes: Elastic–ideally plastic model analysis ».
International Journal of Engineering Trends and Technology, vol. 70, nº 9.
pp. 400-410.
Belzile, Bruno et St-Onge, David.
2022.
« ARIES: Cylindrical pendulum actuated explorer sphere ».
IEEE/ASME Transactions on Mechatronics, vol. 27, nº 4.
pp. 2142-2150.
Belzile, Bruno et St-Onge, David.
2022.
« Design and modeling of a spherical robot actuated by a cylindrical drive ».
In IEEE International Conference on Robotics and Automation (ICRA) (Philadelphia, PA, USA, May 23-27, 2022)
pp. 1169-1175.
Institute of Electrical and Electronics Engineers Inc..
Belzile, Bruno et St-Onge, David.
2022.
« How to manipulate? Kinematics, dynamics and architecture of robot arms ».
In
Foundations of Robotics: A Multidisciplinary Approach with Python and ROS.
pp. 265-297. Singapore : Springer Nature Singapore.
Belzile, Bruno et St-Onge, David.
2022.
« Safety first: On the safe deployment of robotic systems ».
In
Foundations of Robotics: A Multidisciplinary Approach with Python and ROS.
pp. 415-439. Singapore : Springer Nature Singapore.
Ben Amor, Sabrine, Tahan, Antoine et Louhichi, Borhen.
2022.
« The impact of geometric complexity on printing time and cost for additive manufacturing (AM) process ».
In Advances in Mechanical Engineering and Mechanics II : Selected Papers from the 5th Tunisian Congress on Mechanics, CoTuMe (En ligne, Mar. 22-24, 2021)
Coll. « Lecture Notes in Mechanical Engineering »
pp. 203-210.
Springer Science and Business Media Deutschland GmbH.
Benacchio, S., Luan, Y., Doutres, O. et Sgard, F..
2022.
« Influence de l’impédance tympanique sur la perte par insertion de protecteurs auditifs intra-auriculaires ».
In 16e Congrès Français d'Acoustique (CFA) (Marseille, France, 11-15 avril 2022)
Berger, Elliott et Voix, Jérémie.
2022.
« Chapitre 11 : Hearing protection devices ».
In
The Noise Manual.
6th Edition.
pp. 255-308. American Industrial Hygiene Association. Bezançon, G., Doutres, O., Dupont, T., Leclaire, P. et Umnova, O.. 2022. « Mesoscopic cavities added in a thin multi-resonant metamaterial to improve low frequency acoustic absorption ». Communication lors de la conférence : Symposium on Acoustic Metamaterials (Nîmes, France, Oct. 19-21, 2022). Bigot, L. et Seers, P.. 2022. « Impact of the spark plug boundary condition on the modelling of the spark discharge ignition of a CH4 – air mixture, ». Communication lors de la conférence : Combustion Institute – Canadian Section, Spring Technical Meeting (Ottawa, ON, Canada, May 16-19, 2022).
Bouchy, Sevan, Zednik, Ricardo J. et Belanger, Pierre.
2022.
« Characterization of the elastic, piezoelectric, and dielectric properties of lithium niobate from 25 degrees C to 900 degrees C using electrochemical impedance spectroscopy resonance method ».
Materials, vol. 15, nº 13.
Bouzid, Hakim A.. 2022. « On the self-loosening of bolted joints ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022). Bouzid, Hakim A., Bouzid, Sofiane et Ngo, Anh Dung. 2022. « On the tightness and strength of ASME section X FRP Flanges ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022).
Bouzid, Sofiane, Bouzid, Abdel-Hakim et Ngô, Anh Dung.
2022.
« A study of the strength of ASME section X FRP flanges ».
In ASME Pressure Vessels & Piping Conference (Las Vegas, NV, USA, July 17-22, 2022)
American Society of Mechanical Engineers (ASME).
Bouzid, Sofiane, Bouzid, Abdel-Hakim et Ngô, Anh Dung.
2022.
« Stress analysis of ASME section X flanges using classical lamination theory ».
In 14th International Pipeline Conference (Calgary, AB, Canada, Sept. 26-30, 2022)
American Society of Mechanical Engineers (ASME).
Bregaint, Antoine et Rousse, Daniel.
2022.
« Étude de l’intégration des énergies renouvelables intermittentes dans le mix électrique français ».
In XVe Colloque International Franco-Québécois en énergie (CIFQ) (Paris, France, 15-17 juin 2022)
Brooke, Daniel C., Umnova, Olga, Leclaire, Philippe et Dupont, Thomas.
2022.
« Description of sound absorption by a flat resonator stacking metamaterial with double porosity model ».
In Internoise - 51st International Congress and Exposition on Noise Control Engineering (Glasgow, Scotland, Aug. 21-24, 2022)
Institute of Noise Control Engineering of the USA, Inc.. Brooke, Daniel C., Umnova, Olga, Leclaire, Philippe et Dupont, Thomas. 2022. « Description of sound absorption by a flat resonator stacking metamaterial with double porosity model ». Communication lors de la conférence : Internoise - 51st International Congress and Exposition on Noise Control Engineering (Glasgow, Scotland, Aug. 21-24, 2022).
Bui, Thi-Thuyet, Vu, Viet-Hung et Liu, Zhaoheng.
2022.
« Modal analysis of slow varying non-stationary vibration by model updating with Schur complement ».
Mechanical Systems and Signal Processing, vol. 162.
Cantin, Sebastien, Chouak, Mohamed, Morency, François et Garnier, François.
2022.
« Eulerian-Lagrangian CFD-microphysics modeling of Aircraft-Emitted Aerosol Formation at Ground-Level ».
In AIAA Science and Technology Forum and Exposition (AIAA SciTech Forum) (San Diego, CA, USA - En ligne, Jan. 03-07, 2022)
Coll. « AIAA Paper », vol. AIAA 2022-1823.
American Institute of Aeronautics and Astronautics Inc..
Cantin, Sébastien, Chouak, Mohamed, Morency, François et Garnier, François.
2022.
« Eulerian–Lagrangian CFD-microphysics modeling of a near-field contrail from a realistic turbofan ».
International Journal of Engine Research, vol. 23, nº 4.
Cantin, Sébastien, Misandeau, Adrien, Chouak, Mohamed et Garnier, François. 2022. « Effect of nozzle chevron technology on the near-field contrail properties behind an aircraft engine using a CFD-microphysics coupling ». Communication lors de la conférence : 25th ISABE Conference (Ottawa, ON, Canada, Sept. 25-30, 2022).
Carillo, K., Sgard, F., Dazel, O. et Doutres, O..
2022.
« Développement de méta-bouchons d’oreilles basés sur le principe d’absorption parfaite afin de réduire l’effet d’occlusion ».
In 16e Congrès Français d'Acoustique (CFA) (Marseille, France, 11-15 avril 2022)
Carillo, Kévin, Sgard, Franck, Dazel, Olivier et Doutres, Olivier.
2022.
« Reduction of the occlusion effect induced by earplugs using quasi perfect broadband absorption ».
Scientific Reports, vol. 12, nº 1.
Catar, Louis et Tabiai, Ilyass.
2022.
« Towards the characterisation of polymer micro-lattices additive manufacturing techniques for versatile aerospace structure design ».
In 1st International Conference on Advanced Manufacturing for Aerospace and Space Applications (ICAM22) (En ligne, May 07-11, 2022)
Catar, Louis, Tabiai, Ilyass et St-Onge, David.
2022.
« Additive manufacturing strategy for ultra-lightweight high value-added components ».
In ASME 2022 International Design Engineering Technical Conferences Computers and Information in Engineering Conference (St-Louis, MO, USA, Aug. 14-17, 2022)
ASME.
Chabot, Olivier, Lessard, Larry et Dubé, Martine.
2022.
« A novel flax fibre composite material for stringed instrument fingerboards ».
Journal of Reinforced Plastics and Composites, vol. 41, nº 17-18.
pp. 670-678.
Chaboty, Aubin A., Nguyen, Vu-Hieu, Naili, Salah, Haiat, Guillaume et Bélanger, Pierre.
2022.
« Effect of bone degradation on axially transmitted low frequency (<500 kHz) ultrasonic guided waves ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 152, nº 4_Suppl..
A281.
Chaudhry, Shubham et Soulaïmani, Azzeddine.
2022.
« A comparative study of machine learning methods for computational modeling of the selective laser melting additive manufacturing process ».
Applied Sciences, vol. 12, nº 5.
Chaudhry, Shubham, Tchouambe, J. W. Tcheumanak Chitcheu IV, Soulaimani, Azzedine et Das, Rajeev.
2022.
« Computational modelling of SLM additive manufacturing of metals ».
International Journal of Manufacturing Research, vol. 17, nº 4.
pp. 389-421. Chéret, A., Quirion, T., Le Floc'h, A. et Sanjose, M.. 2022. « Numerical investigation of a pressure-induced laminar separation bubble on a flat plate ». Communication lors de la conférence : Annual Conference of the CFD Society of Canada (En ligne, Aug. 08-09, 2022).
Chouak, Mohamed, Cantin, Sebastien, Seers, Patrice et Garnier, François.
2022.
« High-fidelity CFD modeling of pollutant dispersion from aircraft auxiliary power units (APUs) at a realistic airport and the effects on airport air quality ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 230.
Chunping, Zhang, Loucif, Abdelhalim, Jahazi, Mohammad et Morin, Jean Benoit.
2022.
« FEM simulation of the effect of mold initial temperature on carbon macrosegregation in large-size steel ingots ».
In 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap (Kyoto, Japan - En ligne, Oct. 14-17, 2021)
Coll. « Materials Science Forum », vol. 1053.
pp. 258-263.
Trans Tech Publications.
Corbin-Berrigan, Laurie-Ann, Wagnac, Eric, Vinet, Sophie-Andrée, Charlebois-Plante, Camille, Guay, Samuel, Aussant-Bibeau, Meaghan, Godin, Dominique et De Beaumont, Louis.
2022.
« Exploratory study of below 10 G head impact telemetry in varsity football players ».
[Résumé d'une communication à une conférence]. Brain Injury, vol. 36.
p. 42. Côté, R., Ancé, S., Charlon, S., Soulestin, J., Demers, V. et Demarquette, N.. 2022. « Impact of the process parameters on printing pressure experienced in material extrusion additive manufacturing of highly-filled polymer (MEAM-HP) ». Communication lors de la conférence : 37th International Conference of the Polymer Processing Society (PPS-37) (Fukuoka, Japan, Apr. 11-15, 2022).
Coupal, F. X., Negrini, A., Berbiche, D. et Doutres, O..
2022.
« Étude terrain du confort multidimensionnel des protecteurs auditifs de type bouchons d’oreille ».
In 16e Congrès Français d'Acoustique (CFA) (Marseille, France, 11-15 avril 2022)
Cunningham, Nicholas, Lapointe, Réjean et Lerouge, Sophie.
2022.
« Biomaterials for enhanced immunotherapy ».
APL Bioengineering, vol. 6, nº 4.
pp. 3155-3169.
de Oliveira-Filho, Adaiton Moreira, Cambron, Philippe et Tahan, Antoine.
2022.
« Condition monitoring of wind turbine main bearing using SCADA data and informed by the principle of energy conservation ».
In Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022)
pp. 276-282.
IEEE.
Delmas, Vincent et Soulaïmani, Azzeddine.
2022.
« Multi-GPU implementation of a time-explicit finite volume solver using CUDA and a CUDA-Aware version of OpenMPI with application to shallow water flows ».
Computer Physics Communications, vol. 271.
Delmas, Vincent et Soulaïmani, Azzeddine.
2022.
« Parallel high-order resolution of the Shallow-water equations on real large-scale meshes with complex bathymetries ».
Journal of Computational Physics, vol. 471.
Delpech, Théo, Thomasset, Bastien et Rousse, Daniel R..
2022.
« Conception d’un systeme de pompage d’eau solaire photovoltaïque experimental pour régions isolées : Mécanique, simulations et perspectives d’implantation ».
In XVe Colloque International Franco-Québécois en énergie (CIFQ) (Paris, France, 15-17 juin 2022)
Delpla, Victor, Chapron, Kevin, Kenne, Jean-Pierre et Hof, Lucas.
2022.
« Towards intelligent manufacturing system safety strategies: generating LockOut/TagOut sheets by Machine Learning - a case study ».
IFAC-PapersOnLine, vol. 55, nº 10.
pp. 1001-1006.
Delpla, Victor, Kenné, Jean-Pierre et Hof, Lucas A..
2022.
« Circular manufacturing 4.0: Towards internet of things embedded closed-loop supply chains ».
International Journal of Advanced Manufacturing Technology, vol. 118.
pp. 3241-3264. Demuynck, Michel, Delnavaz, Aidin et Voix, Jérémie. 2022. « Finite element modeling of the coupling between the earcanal and the temporomandibular joint ». Communication lors de la conférence : 27th Congress of the European Society of Biomechanics (Porto, Portugal, June 26-29, 2022). Demuynck, Michel, Delnavaz, Aidin et Voix, Jérémie. 2022. « Human earcanal dynamic motion : A discrete approach to study the size and shape variations with head, face and jaw movements ». Affiche présentée lors de la conférence : North American Congress on Biomechanics (Ottawa, ON, Canada, Aug. 21-25, 2022).
Derardja, Elhocine, Rafiei, Arash et Moosavi-Khoonsari, Elmira.
2022.
« Development of a smart database for wastes from the Canadian mining and metallurgical industry ».
In 61st Annual Conference of Metallurgists (COM) (Montreal, QC, Canada, Aug. 21-24, 2022)
Canadian Institute of Mining, Metallurgy and Petroleum.
Deschênes, P. A., Wheeler, R., Paquet, D., Lanteigne, J., Serventi, A. M., Tôn-Thât, L. et Champliaud, H..
2022.
« Micromechanical properties of low-carbon martensitic stainless steel by microtensile experiments ».
Materials Science and Engineering: A, vol. 858.
Desrosiers, Catherine, Letenneur, Morgan, Bernier, Fabrice, Cheriet, Farida, Brailovski, Vladimir, Piche, Nicolas et Guibault, Francois.
2022.
« Correlative laser confocal microscopy study and multimodal 2D/3D registration as ground truth for x-ray inspection of internal defects in LPBF manufacturing ».
e-Journal of Nondestructive Testing, vol. 27, nº 3.
Di Labbio, Giuseppe, Abderrahmane, Hamid, Fayed, Moahemed et Ng, Hoi Dick. 2022. « Skeleton of multiple vortex tornadoes in a bucket ». Affiche présentée lors de la conférence : 75th Annual Meeting of the APS Division of Fluid Dynamics (Indianopolis, IN, USA, Nov. 20-22, 2022).
Di Labbio, Giuseppe, Thiffeault, Jean-Luc et Kadem, Lyes.
2022.
« Braids in the heart: Global measures of mixing for cardiovascular flows ».
Flow, vol. 2.
Diallo, Abdou Khadri, Helal, Emna, Gutierrez, Giovanna, Madinehei, Milad, David, Eric, Demarquette, Nicole et Moghimian, Nima.
2022.
« Graphene: A multifunctional additive for sustainability ».
Sustainable Materials and Technologies, vol. 33.
Dionne, A., Magnuson, D. S. K., Bernard, F., Richard-Denis, A., Petit, Y., Barthélémy, D. et Mac-Thiong, J-M.. 2022. « Is it safe to start activity-based therapy within 72h of traumatic spinal cord injury? Interim results from the PROMPT-SCI trial ». Communication lors de la conférence : American Spinal Injury Association Annual Scientific Meeting (ASIA) (New Orleans, LA, USA, May 18-20, 2022). Diotalevi, L., Bailly, N., Wagnac, E., Mac-Thiong, J-M. et Petit, Y.. 2022. « Thoracolumbar burst fracture patterns and kinematics: impacts on the spinal cord dynamics ». Communication lors de la conférence : SIMBIO-M 2022 (Marseille, France, June 21-22, 2022). Diotalevi, L., Mac-Thiong, J-M. et Petit, Y.. 2022. « Modelling the in situ cerebrospinal fluid damping effect in spinal cord injuries ». Communication lors de la conférence : SIMBIO-M 2022 (Marseille, France, June 21-22, 2022).
Do, Thanh-Trung, Vu, Viet-Hung et Liu, Zhaoheng.
2022.
« Linearization of dynamic equations for vibration and modal analysis of flexible joint manipulators ».
Mechanism and Machine Theory, vol. 167.
Dollon, Quentin, Antoni, Jérôme, Tahan, Antoine, Gagnon, Martin et Monette, Christine.
2022.
« A fast collapsed Gibbs sampler for frequency domain operational modal analysis ».
Mechanical Systems and Signal Processing, vol. 173.
Dourandish, Simin, Champliaud, Henri, Morin, Jean -Benoit et Jahazi, Mohammad.
2022.
« Microstructure-based finite element modeling of a martensitic stainless steel during hot forging ».
International Journal of Advanced Manufacturing Technology, vol. 123, nº 7-8.
pp. 2833-2851.
Doutres, Olivier, Sgard, Franck, Terroir, Jonathan, Perrin, Nellie, Jolly, Caroline, Gauvin, Chantal et Negrini, Alessia.
2022.
« A critical review of the literature on comfort of hearing protection devices: Analysis of the comfort measurement variability ».
[Critique]. International Journal of Occupational Safety and Ergonomics, vol. 28, nº 1.
pp. 447-458.
Doutres, Olivier, Terroir, Jonathan, Jolly, Caroline, Gauvin, Chantal, Martin, Laurence et Negrini, Alessia.
2022.
« Towards a holistic model explaining hearing protection device use among workers ».
International Journal of Environmental Research and Public Health, vol. 19, nº 9.
Drame, A. B. et Sanjose, M.. 2022. « Effect of flow coefficient on performance of a linear compressor cascade with tip gap ». Communication lors de la conférence : Annual Conference of the CFD Society of Canada (En ligne, Aug. 08-09, 2022). Drees, Elliot et Voix, Jérémie. 2022. « La protection auditive numérique du musicien ». Communication lors de la conférence : CIRMMT Workshop on Musicians’ Hearing Health (Montréal, QC, Canada, 11 mai 2022).
Dubinskiy, S. M., Baranova, A. P. et Brailovski, V..
2022.
« Influence of Heating and Cooling on the Isothermal β → ω Transition in Ti–22Nb–6Zr Alloy ».
Russian Journal of Non-Ferrous Metals, vol. 63, nº 6.
pp. 659-663.
Dubinskiy, S., Markova, G., Baranova, A., Vvedenskiy, V., Minkova, I., Prokoshkin, S. et Brailovski, V..
2022.
« A non-typical Elinvar effect on cooling of a beta Ti-Nb-Zr alloy ».
Materials Letters, vol. 314.
Dubois, Patrick K., Landry-Blais, Alexandre, Gazzah, Rym, Sivi, Sani, Brailovski, Vladimir et Picard, Mathieu.
2022.
« Cooling performance of additively manufactured pin fins in stacked microchannels for the inside-out ceramic turbine shroud-cooling ring ».
Journal of Turbomachinery, vol. 144, nº 7.
Dudzik, Bernd, Küster, Dennis, St-Onge, David et Putze, Felix.
2022.
« The 4th workshop on modeling socio-emotional and cognitive processes from multimodal data in-the-wild (MSECP-Wild) ».
In ICMI '22: Proceedings of the 2022 International Conference on Multimodal Interaction (Bengaluru, India, Nov. 07-11, 2022)
pp. 803-804.
Association for Computing Machinery.
Dupont-Marillia, Frederic, Krynicki, Joseph et Bélanger, Pierre.
2022.
« Early detection of high temperature hydrogen attack using the ultrasonic full matrix capture and advanced post-processing methods ».
NDT and E International, vol. 130.
Ebacher, L., Jahazi, M., Morin, J. B. et Ritchey, B..
2022.
« Thermomechanical study of H13 hot forged bars ».
In 4th International Ingot Casting Rolling Forging, ICRF 2022 - Conference Proceedings (Pittsburgh, PA, USA, June 21-23, 2022)
pp. 26-37.
Association for Iron and Steel Technology, AISTECH.
Elelwi, Mohamed, Pinto, Felipe Schiavoni, Botez, Ruxandra Mihaela et Dao, Thien My.
2022.
« Multidisciplinary optimization for weight saving in a variable tapered span-morphing wing using composite materials—application to the UAS-S4 ».
Actuators, vol. 11, nº 5.
El-Hadad, Shimaa, Samuel, Agnes M., Samuel, Fawzy H., Doty, Herbert W. et Songmene, Victor.
2022.
« Effect of Bi and Ca on the solidification parameters of Sr-Modified Al-S-Cu (Mg) alloys ».
Materials, vol. 15, nº 19.
Eres-Castellanos, Adriana, Zorgani, Muftah, Shahriari, Davood, Romanica, Radu, Jimenez, Jose Antonio, Garcia-Mateo, Carlos et Jahazi, Mohammad.
2022.
« Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel ».
Journal of Materials Research and Technology, vol. 18.
pp. 3428-3442.
Ernez, Sami et Morency, François.
2022.
« A multi-region CFD model for aircraft ground deicing by dispersed liquid spray ».
Energies, vol. 15, nº 17.
Esouilhem, Mohamed, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2022.
« Pressure vessels and piping accident analysis and prevention: A case study in Canada ».
International Journal of Safety and Security Engineering, vol. 12, nº 1.
pp. 105-114.
Evin, Morgane, Sudres, Patrice, Weber, Pascal, Godio-Raboutet, Yves, Arnoux, Pierre-Jean, Wagnac, Eric, Petit, Yvan et Tillier, Yannick.
2022.
« Experimental Bi-axial tensile tests of spinal meningeal tissues and constitutive models comparison ».
Acta Biomaterialia, vol. 140.
pp. 446-456. Fallahfard, A., Vinches, L. et Hallé, S.. 2022. « Predicting the exposure level of airborne contaminants in occupational settings via the well-mixed room model ». Communication lors de la conférence : 16th International Conference on Industrial Hygiene Engineering and Applications (Barcelona, Spain, Aug. 16-17, 2022). Fallahfard, Alireza, Vinches, Ludwig et Hallé, Stéphane. 2022. « Predicting the exposure level of airborne contaminants in occupational settings via the well-mixed room mode ». Communication lors de la conférence : 16th International Conference on Industrial Hygiene Engineering and Applications (Barcelona, Spain, Aug. 16-17, 2022).
Fayed, Eslam M., Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2022.
« Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling ».
Materials Science and Engineering: A, vol. 838.
Ferreira Junior, José Carlos, Moghimian, Nima, Gutiérrez, Giovanna, Helal, Emna, Ajji, Abdellah, Barra, Guilherme Mariz de Oliveira et Demarquette, Nicole R..
2022.
« Effects of an industrial graphene grade and surface finishing on water and oxygen permeability, electrical conductivity, and mechanical properties of high-density polyethylene (HDPE) multilayered cast films ».
Materials Today Communications, vol. 31.
Feujofack Kemda, B. V., Barka, N., Jahazi, M. et Osmani, D..
2022.
« Multi-objective optimization of process parameters in resistance spot welding of A36 mild steel and hot dipped galvanized steel sheets using non-dominated sorting genetic algorithm ».
Metals and Materials International, vol. 28, nº 2.
pp. 487-502.
Fortin, William, Bouchet, Mélusine, Therasse, Eric, Maire, Marion, Héon, Hélène, Ajji, Abdellah, Soulez, Gilles et Lerouge, Sophie.
2022.
« Negative in vivo results despite promising in vitro data with a coated compliant electrospun polyurethane vascular graft ».
Journal of Surgical Research, vol. 279.
pp. 491-504. Fournier, Marion, Bailly, Nicolas, Schäuble, Andreas et Petit, Yvan. 2022. « Biomechanical study of electric scooter falls ». Communication lors de la conférence : 27th Congress of the European Society of Biomechanics (ESB) (Porto, Portugal, June 26-29, 2022). Gallerand, L., Legrand, M., Dupont, T. et Leclaire, P.. 2022. « Comportement vibratoire des plaques microperforées finies ». Communication lors de la conférence : 16e Congrès Français d’Acoustique (Marseille, France, 11-15 avr. 2022).
Gallerand, Lucie, Legrand, Mathias, Dupont, Thomas et Leclaire, Philippe.
2022.
« Vibration and damping analysis of a thin finite-size microperforated plate ».
Journal of Sound and Vibration, vol. 541.
Gallerand, Lucie, Legrand, Mathias, Dupont, Thomas et Leclaire, Philippe.
2022.
« Vibrational damping properties of finite microperforated plates ».
In Internoise - 51st International Congress and Exposition on Noise Control Engineering (Glasgow, Scotland, Aug. 21-24, 2022)
Institute of Noise Control Engineering of the USA, Inc.. Gallerand, Lucie, Legrand, Mathias, Dupont, Thomas et Leclaire, Philippe. 2022. « Vibrational damping properties of finite microperforated plates ». Communication lors de la conférence : Internoise - 51st International Congress and Exposition on Noise Control Engineering (Glasgow, Scotland, Aug. 21-24, 2022).
Gauthier, Baptiste, Painchaud-April, Guillaume, Le Duff, Alain et Belanger, Pierre.
2022.
« Lightweight and amplitude-free ultrasonic imaging using single-bit digitization and instantaneous phase coherence ».
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 69, nº 5.
pp. 1763-1774.
Gharbi, A., Kenné, J. P. et Kaddachi, R..
2022.
« Dynamic optimal control and simulation for unreliable manufacturing systems under perishable product and shelf life variability ».
International Journal of Production Economics, vol. 247.
Ghedhaïfi, W., Montreuil, E., Chouak, M. et Garnier, F..
2022.
« 3D high-resolution modeling of aircraft-induced NOx emission dispersion in CAEPport configuration using landing and take-off trajectory tracking ».
Water, Air, and Soil Pollution, vol. 233, nº 10.
Ghodake, Dipali, Sanjosé, Marlène, Moreau, Stéphane et Henner, Manuel.
2022.
« Effect of sweep on axial fan noise sources using the Lattice Boltzmann Method ».
International Journal of Turbomachinery, Propulsion and Power, vol. 7, nº 4.
Ghodrati, Neda, Baiteche, Mounir, Loucif, Abdelhalim, Gallego, Paloma Isabel, Jean-Benoit, Morin et Jahazi, Mohammad.
2022.
« Influence of hot top height on macrosegregation and material yield in a large-size cast steel ingot using modeling and experimental validation ».
Metals, vol. 12, nº 11.
Ghodrati, Neda, Loucif, Abdelhalim, Morin, Jean -Benoit et Jahazi, Mohammad.
2022.
« Modeling of the influence of hot top design on microporosity and shrinkage cavity in large-size cast steel ingots ».
In 8th International Congress on the Science and Technology of Steelmaking (Montreal, QC, Canada, Aug. 02-04, 2022)
pp. 239-244.
Association for Iron & Steel Technology.
Giard, Gregory, Tousignant, Maxime, McMeekin, Kevin, Bellotto, Federico, Bocher, Philippe et Sirois, Frederic.
2022.
« Power-equivalent complex permeability model for nonlinear and hysteretic materials in the frequency domain for induction heating applications ».
IEEE Transactions on Magnetics, vol. 58, nº 6.
Ginzel, Edward, Bajgholi, Mohammad E., Burrowes M. Guimarâes, Mariana, Foucher, Fabrice, Rousseau, Gilles et Viens, Martin.
2022.
« Total focusing method used for flaw sizing in probability of detection determination ».
e-Journal of Nondestructive Testing, vol. 27, nº 7.
Grange, Mathieu, Nadeau, Sylvie et Hof, Lucas.
2 novembre 2022.
« Disassembly 4.0/5.0 in the Automotive Industry ».
[Article de recherche]. Substance ÉTS.
Grange, Mathieu, Nadeau, Sylvie et Hof, Lucas.
2 novembre 2022.
« Désassemblage 4.0/5.0 : le cas de l’industrie automobile ».
[Article de recherche]. Substance ÉTS.
Grine, Madani, Slamani, Mohamed, Arslane, Mustapha et Chatelain, Jean-François.
2022.
« Assessment of the hole quality during drilling alfa fiber (Stipa tenacissima) reinforced composites ».
In ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
pp. 2023-2028.
Guner, Bugrahan et Dagdeviren, Omur E..
2022.
« Multidimensionality of the contact potential difference at the nanoscale in inorganic oxides ».
ACS Applied Electronic Materials, vol. 4, nº 8.
pp. 4085-4093.
Hachchadi, Oussama, Rousse, Daniel R., Mechaqrane, Abdellah et Carreau, Michel.
2022.
« Étude techno-économique comparative du chauffe-eau photovoltaïque et chauffe-eau solaire thermique dans un climat froid ».
In XVe Colloque International Franco-Québécois en énergie (CIFQ) (Paris, France, 15-17 juin 2022)
Haillot, Didier. 2022. « Efficacité énergétique des espaces d’agriculture en environnement contrôlé ». Communication lors de la conférence : Avis de recherche – édition spéciale Changements climatiques (Montréal, QC, Canada, 7 mars 2022).
Haillot, Didier et Monfet, Danielle.
10 octobre 2022.
« Optimiser les serres pour augmenter l’autonomie alimentaire du Québec ».
Substance ÉTS.
Haillot, Didier et Monfet, Danielle.
10 octobre 2022.
« Optimizing Greenhouses to Increase Quebec’s Food Autonomy ».
Substance ÉTS.
Hakimian, Soorosh, Bouzid, Hakim A. et Hof, Lucas. 2022. « A study on the influence of operational factors on the flange face corrosion using a novel experimental test bench ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022).
Hakimian, Soroosh, Hof, Lucas A. et Bouzid, Hakim A..
2022.
« An improved fixture to quantify corrosion in bolted flanged gasketed joints subjected to service conditions ».
In ASME Pressure Vessels & Piping Conference (Las Vegas, Nevada, USA, July 17-22, 2022)
American Society of Mechanical Engineers (ASME).
Hakimian, Soroosh, Hof, Lucas et Bouzid, Hakim A..
2022.
« Investigation of corrosion in bolted flanged joints using a novel experimental setup ».
[Résumé d'une communication à une conférence]. ECS Meeting Abstracts, vol. MA2022-01, nº 16.
p. 990. Hallé, S., Zemzem, M. et Vinches, L.. 2022. « Exposition aux froids intenses : Vers des vêtements isolants plus efficaces ». Communication lors de la conférence : 42e congrès annuel de l'AQHSST (Sherbrooke, QC, Canada, 11-13 mai 2022). Hamouda, I., Adoungotchodo, A., Da Rocha Moreau, M., Touani Kameni, F. et Lerouge, S.. 2022. « Hydrogels à base de réseau interpénétrés de chitosane-gélatine pour l’ingénierie et la thérapie cellulaire ». Affiche présentée lors de la conférence : Journée Thécell (Montréal, QC, Canada, 14 nov. 2022).
Havaeji, Hossein, Dao, Thien-My et Wong, Tony.
2022.
« Cost optimization of blockchain technology-enabled supply chain system using evolutionary computation approaches: A healthcare case study ».
World Wide Journal of Multidisciplinary Research and Development, vol. 8, nº 3.
pp. 27-42. Heinrich, Aurélien, Petit, Yvan et Beauséjour, Marie-Hélène. 2022. « Spinal osteophytes’ morphological characterization and segmentation ». Communication lors de la conférence : SIMBIO-M 2022 (Marseille, France, June 21-22, 2022).
Herath, Damith, Jochum, Elizabeth et St-Onge, David.
2022.
« Editorial: The art of human-robot interaction: Creative perspectives from design and the arts ».
[Éditorial]. Frontiers in Robotics and AI, vol. 9.
Hernandez-Sandoval, J., Zedan, Y., Songmene, V., Abdelaziz, M. H., Samuel, F. H. et Garza-Elizondo, G. H..
2022.
« Effect of minor addition of Ni and Zr on the high-temperature performance of Al-Si-Cu-Mg cast alloys ».
International Journal of Metalcasting, vol. 16, nº 3.
pp. 1235-1251.
Houria, Manel, Matougui, Nedjoua, Mehdi, Brahim, Kherrouba, Nabil et Jahazi, Mohammad.
2022.
« Effect of plastic anisotropy on the kinetics of static softening in AA2024-T3 aluminum alloy ».
Metals and Materials International, vol. 28.
pp. 2042-2058.
Ibrahim, R., Zemouri, R., Tahan, A., Lafleur, F., Kedjar, B., Merkhouf, A. et Al-haddad, K..
2022.
« Anomaly detection for large hydrogenerators using the variational autoencoder based on vibration signals ».
In International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022)
pp. 1609-1615.
Piscataway, NJ, USA : IEEE.
Ignatowicz, Kevin, Morency, François, Beaugendre, Héloïse et Solaï, Elie.
2022.
« Data-driven calibration of RANS heat transfer prediction on a curved rough surface ».
In 56th 3AF International Conference on Applied Aerodynamics (Toulouse, France, March 28-30, 2022)
Ignatowicz, Kevin, Solai, Elie, Morency, Francois et Beaugendre, Heloise.
2022.
« Data-driven calibration of rough heat transfer prediction using bayesian inversion and genetic algorithm ».
Energies, vol. 15, nº 10.
Jamshidi, Maryam, Chatelain, Jean-François, Rimpault, Xavier et Balazinski, Marek.
2022.
« Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming ».
International Journal of Advanced Manufacturing Technology, vol. 121, nº 11-12.
pp. 8127-8142.
Jamshidi, Maryam, Chatelain, Jean-François, Rimpault, Xavier et Balazinski, Marek.
2022.
« Tool condition monitoring using machine tool spindle electric current and multiscale analysis while milling steel alloy ».
Journal of Manufacturing and Materials Processing, vol. 6, nº 5.
Javanbakht, Taraneh et David, Eric.
2022.
« Rheological and physical properties of a nanocomposite of graphene oxide nanoribbons with polyvinyl alcohol ».
Journal of Thermoplastic Composite Materials, vol. 35, nº 5.
Jimenez, Erika Herrera, Kreitcberg, Alena, Moquin, Etienne et Brailovski, Vladimir.
2022.
« Influence of post-processing conditions on the microstructure, static, and fatigue resistance of laser powder bed fused Ti-6Al-4V components ».
Journal of Manufacturing and Materials Processing, vol. 6, nº 4.
Kaddachi, Rawia, Gharbi, Ali et Kenné, Jean-Pierre.
2022.
« Integrated production and maintenance control policies for failure-prone manufacturing systems producing perishable products ».
International Journal of Advanced Manufacturing Technology, vol. 119, nº 7-8.
pp. 4635-4657.
Kalush, Ali, Texier, Damien, Ecochard, Maxime, Sirvin, Quentin, Choquet, Karim, Gheno, Thomas, Vanderesse, Nicolas, Jomaa, Walid et Bocher, Philippe.
2022.
« Size effects on high temperature oxidation of MCrAlY coatings processed via APS and HVOF depositions ».
Surface and Coatings Technology, vol. 440.
Karimi, Samira, Ghasemi, Ismail, Abbassi-Sourki, Foroud, Samara, Mazen et Demarquette, Nicole R..
2022.
« PEG-Grafted graphene/PLLA nanocomposites: Effect of PEG chain length on crystallization kinetics of PLLA ».
ACS Omega, vol. 7, nº 35.
pp. 31197-31204.
Kaveh, Kianoosh, Morin, Jean-Benoit, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira.
2022.
« Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking ».
In 8th International Congress on the Science and Technology of Steelmaking (ICS) (Montreal, QC, Canada, Aug. 02-04, 2022)
pp. 199-206.
Association for Iron & Steel Technology.
Kavyani, M., Ebrahimi, G. R., Ezatpour, H. R. et Jahazi, M..
2022.
« Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process ».
Journal of Magnesium and Alloys, vol. 10, nº 6.
pp. 1640-1662. Kerkouche, K., Petit, Y., Le Naveaux, F., Laberge, M., Benoît, D., Boutin, G. et Wagnac, É.. 2022. « Effect of surface coatings on the safety performance of a protective helmet ». Communication lors de la conférence : 24th International Congress on Snowsports Trauma and Safety and 37th Congres of the International Society for Snowsports Medicine (ISSS-SITEHMS) (Serre-Chevalier, France, Mar. 27-Apr. 02, 2022). Khoddammohammadi, N. et Nadeau, S.. 2022. « Integration of traditional, automatized and intelligent technologies in manufacturing: Towards the integration of smart glasses ». Affiche présentée lors de la conférence : Congrès CARWH (En ligne, 15-16 sept. 2022).
Koch, Regis, Sanjosé, Marlène et Moreau, Stéphane.
2022.
« Acoustic investigation of the transonic RAE 2822 airfoil with large-eddy simulation ».
In 28th AIAA/CEAS Aeroacoustics Conference (Southampton, UK, June 14-17, 2022)
Coll. « AIAA Paper », vol. AIAA 2022-2816.
American Institute of Aeronautics and Astronautics Inc, AIAA.
Koch, Regis, Sanjosé, Marlène et Moreau, Stéphane.
2022.
« Large-eddy simulation and acoustic prediction of a helicopter rotor in hover ».
In 28th AIAA/CEAS Aeroacoustics Conference (Southampton, UK, June 14-17, 2022)
Coll. « AIAA Paper », vol. AIAA 2022-2915.
American Institute of Aeronautics and Astronautics Inc, AIAA.
Koch, Régis, Sanjosé, Marlène et Moreau, Stéphane.
2022.
« Numerical aeroacoustic analysis of a linear compressor cascade with tip gap ».
AIAA Journal, vol. 60, nº 8.
pp. 4840-4854.
Kouam, Jules, Songmene, Victor, Bahloul, Ali et Samuel, Agnes M..
2022.
« Characterization of Si and SiO2 in dust emitted during granite polishing as a function of cutting conditions ».
Materials, vol. 15, nº 11.
Kreitcberg, Alena et Brailovski, Vladimir.
2022.
« Effect of Fe and C contents on the microstructure and high-temperature mechanical properties of IN625 alloy processed by laser powder bed fusion ».
Materials, vol. 15, nº 19.
Kumar, Mukesh, Haillot, Didier et Gibout, Stéphane.
2022.
« Survey and evaluation of solar technologies for agricultural greenhouse application ».
Solar Energy, vol. 232.
pp. 18-34. Lalonde, Timothé, Coursol, Audréanne, Monfet, Danielle, Levasseur, Annie et Haillot, Didier. 2022. « Agriculture en serre de petite taille : impacts environnementaux et financiers de différents scénarios de gestion climatique ». Communication lors de la conférence : CETAB+ : Gestion climatique des cultures de climat frais sous abris (En ligne, 24 février 2022).
Lalonde, Timothé, Monfet, Danielle et Haillot, Didier.
3 mars 2022.
« Chauffer une serre avec la chaleur fatale d’un centre de données ».
Substance ÉTS.
Lalonde, Timothé, Monfet, Danielle et Haillot, Didier.
3 mars 2022.
« Heating a Greenhouse with Data Centre Waste Heat ».
Substance ÉTS.
Langlais, David, Demers, Vincent et Brailovski, Vladimir.
2022.
« Rheology of dry powders and metal injection molding feedstocks formulated on their base ».
Powder Technology, vol. 396, nº Part A.
pp. 13-26.
Laplace, Josée, Bild, Edda, Trudeau, Christopher, Perna, Maxime, Dupont, Thomas et Guastavino, Catherine.
2022.
« Encadrement du bruit environnemental au Canada ».
Canadian Public Policy, vol. 48, nº 1.
pp. 74-90.
Latreille, Quentin, Rousse, Daniel R. et Haillot, Didier.
2022.
« Conception d'un système de production énergétique résidentiel net-zéro pour une habitation au Nunavik ».
In XVème Colloque International Franco-Québécois : Ville et transition (CIFQ) (Paris, France, 15-17 juin 2022)
CIFQ.
Le Bras, Linh-Aurore, Timercan, Anatolie, Llido, Marie, Petit, Yvan, Seguin, Bernard, Lussier, Bertrand et Brailovski, Vladimir.
2022.
« Personalized endoprostheses for the proximal humerus and scapulohumeral joint in dogs: Biomechanical study of the muscles’ contributions during locomotion ».
PLoS ONE, vol. 17, nº 1.
Le, Phuoc Luong, Chaabane, Amin et Dao, Thien-My.
2022.
« BIM contributions to construction supply chain management trends: An exploratory study in Canada ».
International Journal of Construction Management, vol. 22, nº 1.
pp. 66-84.
Lessard, F., Dubé, M. et Laberge Lebel, L..
2022.
« A comprehensive model of the deconsolidation behaviour of unidirectional carbon fibre reinforced thermoplastic composites ».
Composites Part A: Applied Science and Manufacturing, vol. 163.
Lessard, F., Dubé, M. et Laberge Lebel, L..
2022.
« A model of multi-die thermoplastic pultrusion ».
Composites Part B: Engineering, vol. 247.
Lewis, Danny, Moreau, Stephane, Jacob, Marc C. et Sanjose, Marlene.
2022.
« ACAT1 fan stage broadband noise prediction using large-eddy simulation and analytical models ».
AIAA Journal, vol. 60, nº 1.
pp. 360-379.
Lopez, Maël, Dupont, Thomas et Panneton, Raymond.
2022.
« A mass-spring analogy for modeling the acoustic behaviour of a metamaterial ».
In Internoise - 51st International Congress and Exposition on Noise Control Engineering (Glasgow, Scotland, Aug. 21-24, 2022)
Institute of Noise Control Engineering of the USA, Inc.. Lopez, Maël, Dupont, Thomas et Panneton, Raymond. 2022. « A mass-spring analogy for modeling the acoustic behaviour of a metamaterial ». Communication lors de la conférence : Internoise - 51st International Congress and Exposition on Noise Control Engineering (Glasgow, Scotland, Aug. 21-24, 2022). Lörcher, F., Hub, S., Sanjosé, M. et Moreau, S.. 2022. « Investigations on flow stabilization effects of backward curved centrifugal impellers at low flow rate ». Communication lors de la conférence : International Conference on Fan Noise, Aerodynamics, Applications and Systems (Senlis, France, June 27-29, 2022).
Lörcher, Frieder, Hub, Sandra, Sanjosé, Marlène et Moreau, Stéphane.
2022.
« Investigations concerning the flow stabilization of backward curved centrifugal impellers at low flow rate ».
International Journal of Turbomachinery, Propulsion and Power, vol. 7, nº 4.
Loucif, Abdelhalim, Chunping, Zhang, Morin, Jean-Benoît et Jahazi, Mohammad.
2022.
« A FEM analysis on the influence of manganese on carbon and chromium macrosegregation in large size steel ingot ».
In 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap
Coll. « Materials Science Forum », vol. 1053.
pp. 252-257.
Trans Tech Publications.
Luan, Y., Cyr-Desroches, M. O., Carillo, K., Doutres, O. et Sgard, F..
2022.
« Development and evaluation of an artificial ear for quantifying the objective occlusion effect ».
In 24th International Congress on Acoustics (Gyeongju, South Korea, Oct. 24-28, 2022)
International Commission for Acoustics (ICA).
Luan, Yu, Sgard, Franck, Nélisse, Hugues et Doutres, Olivier.
2022.
« A finite element model to predict the double hearing protector effect on an in-house acoustic test fixture ».
Journal of the Acoustical Society of America, vol. 151, nº 3.
pp. 1860-1874.
Lucas, Killian, Bouchy, Sévan, Bélanger, Pierre et Zednik, Ricardo J..
2022.
« High-temperature electrical conductivity in piezoelectric lithium niobate ».
Journal of Applied Physics, vol. 131, nº 19.
p. 194102.
Lukashevich, K. E., Sheremetyev, V. A., Kudryashova, A. A., Derkach, M. A., Andreev, V. A., Galkin, S. P., Prokoshkin, S. D. et Brailovski, V..
2022.
« Effect of forging temperature on the structure, mechanical and functional properties of superelastic Ti-Zr-Nb bar stock for biomedical applications ».
Letters on Materials, vol. 12, nº 1.
pp. 54-58.
Lukashevich, Konstantin, Sheremetyev, Vadim, Komissarov, Alexander, Cheverikin, Vladimir, Andreev, Vladimir, Prokoshkin, Sergey et Brailovski, Vladimir.
2022.
« Effect of cooling and annealing conditions on the microstructure, mechanical and superelastic behavior of a rotary forged Ti–18Zr–15Nb (at. %) bar stock for spinal implants ».
Journal of Functional Biomaterials, vol. 13, nº 4.
Ma, Yan, Moosavi-Khoonsari, Elmira, Myklebust, Håkon A. Hartvedt Olsen et Tranell, Gabriella.
2022.
« Oxidation and fume formation from liquid silicomanganese alloys exposed to atmospheres containing moisture ».
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 53, nº 4.
pp. 2618-2633. Maheux, Timothée, Piché, Paul, Gibout, Stéphane, Arrabie, Cédric, Monfet, Danielle et Haillot, Didier. 2022. « Stockage thermique appliqué à la serriculture nordique ». Communication lors de la conférence : 89e congrès de l'ACFAS (En ligne, 9-13 mai 2022).
Mahmoud, M. G., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H..
2022.
« Effect of rare earth metals (Ce and La) addition on the performance of Al-Si-Cu-Mg Cast Alloys ».
International Journal of Metalcasting, vol. 16, nº 3.
pp. 1164-1190.
Mahmoud, M. G., Zedan, Y., Samuel, A. M., Songmene, V. et Samuel, F. H..
2022.
« The use of rare earth metals in AlSiCu casting alloys ».
International Journal of Metalcasting, vol. 16, nº 2.
pp. 535-552.
Majdi, Seyed Mohammad, Tafti, Atefeh Ayatollahi, Demers, Vincent, Vachon, Guillem et Brailovski, Vladimir.
2022.
« Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding ».
Powder Metallurgy, vol. 65, nº 2.
pp. 170-180.
Marchand, Geneviève, Wingert, Loïc, Hallé, Stéphane et Debia, Maximilien.
2022.
« Assessing embalmer exposure to bioaerosols and the associated health risk ».
Coll. « Studies and Research Projects », vol. R-1110-en.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST). 92 p.
Maroufkhani, Aida, Morency, François et Momen, Gelareh.
2022.
« Development of a runway surface de-icing model to predict the melting time ».
In International Workshop on Atmospheric Icing of Structures, IWAIS (Montreal, QC, Canada, June 19-23, 2022)
Maroufkhani, Mohammad, Khodabandeh, Alireza, Radu, Iulian et Jahazi, Mohammad.
2022.
« Pitting corrosion resistance of the 316L stainless steel welds: influenced of oxygen content in the protective gas ».
In Canadian Society for Mechanical Engineering International Congress (Alberta, AB, Canada, 7-8 juin 2022)
Canadian Society for Mechanical Engineering (CSME).
Martin, Romain Georges, Johansson, Christer, Tavares, Jason Robert et Dubé, Martine.
2022.
« Material selection methodology for an induction welding magnetic susceptor based on hysteresis losses ».
Advanced Engineering Materials, vol. 24, nº 3.
Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2022.
« Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys ».
Journal of Adhesion Science and Technology, vol. 36, nº 3.
pp. 221-239.
Mathieu, Ronan, Charfi, Mohamed Ali, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane, Serra, Roger et Lebrun, Gilbert.
2022.
« Effect of graphene additive on cutting forces and temperature during the trimming process of CFRP ».
International Journal of Advanced Manufacturing Technology, vol. 122, nº 9-10.
pp. 3969-3981.
Mechta, Ahlem, Slamani, Mohamed, Zaoui, Moussa et Chatelain, Jean-François.
2022.
« A comparative evaluation of the performance of three CNC machine tools ».
In ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
pp. 686-691.
Mechta, Ahlem, Slamani, Mohamed, Zaoui, Moussa, Mayer, René et Chatelain, Jean-François.
2022.
« Correlation assessment and modeling of intra-axis errors of prismatic axes for CNC machine tools ».
International Journal of Advanced Manufacturing Technology, vol. 120.
pp. 5093-5115.
Mehrban, Malahat, Voix, Jérémie et Bouserhal, Rachel.
2022.
« Towards detecting and classification non-verbal events and biosignals in hearables ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 50, nº 3.
pp. 76-77.
Mejia-Moncayo, Camilo, Rojas, Alix E., Kenne, Jean-Pierre et Hof, Lucas A..
2022.
« An ant approach to define product families and remanufacturing cells ».
[Article de conférence]. IFAC-PapersOnLine, vol. 55, nº 10.
pp. 73-78.
Menanteau, S. et Lemaire, R..
2022.
« Extension and validation of an optimization procedure aimed at parameterizing a refined model for the simulation of laser-induced incandescence of soot at different excitation wavelengths ».
In 2nd International Conference on Applied Thermo-fluids & Computational Fluids Mechanics (Putrajaya, Malaysia, Mar. 26-27, 2022)
Menanteau, Sébastien et Lemaire, Romain.
2022.
« Parameterization of a refined model aimed at simulating laser-induced incandescence of soot using a visible excitation wavelength of 532 nm ».
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, vol. 98, nº 1.
Miclette, Olivier, Côté, Raphaël, Demers, Vincent et Brailovski, Vladimir.
2022.
« Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach ».
Additive Manufacturing, vol. 60, nº Part A.
Modifi Naeini, Alimeh et Nadeau, Sylvie.
23 mai 2022.
« Approches systémiques d’analyse des risques en fabrication numérique ».
[Article de recherche]. Substance ÉTS.
Modifi Naeini, Alimeh et Nadeau, Sylvie.
23 mai 2022.
« Systemic Approaches to Risk Analysis in Digital Manufacturing ».
[Article de recherche]. Substance ÉTS.
Moeun, B. N., Rahimnejad, M., Brassard, J., Paraskevas, S., Leask, R. L., Lerouge, S. et Hoesli, C. A.. 2022. « Impression 3D in situ pour fabriquer un tissu pancréatique vascularisé ». Affiche présentée lors de la conférence : Journée Thécell (Montréal, QC, Canada, 14 nov. 2022). Mofidi Naeini, A. et Nadeau, S.. 2022. « Comparing FRAM and STAMP for occupational health and safety (OHS) and operational risks analysis: The case of data gloves in assembly 4.0 production ». Affiche présentée lors de la conférence : 33rd International Congress on Occupational Health (ICOH) (Melbourne, Australia ; Rome, Italy - En ligne, Feb. 06-10, 2022).
Mofidi Naeini, Alimeh et Nadeau, Sylvie.
2022.
« A review if the application of FRAM and STAMP approaches combined with other methods ».
In Human Factors and Systems Interaction. AHFE (2022) International Conference (New-York, NY, USA, July 24-28, 2022)
Coll. « AHFE Open Access », vol. 52.
pp. 466-482.
AHFE International.
Mofidi Naeini, Alimeh et Nadeau, Sylvie.
2022.
« STPA systemic approach for OHS and operational risk analysis of data glove use in 4.0 assembly ».
CIRP Journal of Manufacturing Science and Technology, vol. 39.
pp. 317-331.
Montazer Zohour, Hamed, Belzile, Bruno, Gomes Braga, Rafael et St-Onge, David.
2022.
« Minimize tracking occlusion in collaborative pick-and-place tasks: An analytical approach for non-wrist-partitioned manipulators ».
Sensors, vol. 22, nº 17.
Montlahuc, J., Polette, A., Tahan, A., Pernot, J. P. et Rivest, L..
2022.
« Multi-source point cloud semantic segmentation using neural network ».
In 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission III (Nice, France, June 06-11, 2022)
Coll. « International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences », vol. XLIII-B3-2022.
pp. 515-522.
International Society for Photogrammetry and Remote Sensing.
Moosavi-Khoonsari, Elmira, Mostaghel, Sina, Siegmund, Andreas et Cloutier, Jean-Pierre.
2022.
« A review on pyrometallurgical extraction of antimony from primary resources: Current practices and evolving processes ».
Processes, vol. 10, nº 8.
Moosavi-Khoonsari, Elmira et Rafiei, Arash.
2022.
« Development of a smart database for solid mine wastes contributing to circular economy of mining sector ».
In CIMBC 2022 - CIM Annual Convention (Vancouver, BC, Canada, May 01-04, 2022)
Canadian Institute of Mining, Metallurgy and Petroleum.
Moosavi-Khoonsari, Elmira, Van Ende, Marie-Aline et Jung, In-Ho.
2022.
« Kinetic simulation of hot metal pretreatment: desulfurization using powder injection ».
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 53.
pp. 981-998.
Mouâa, Amal, Laghzale, Nor Eddine et Bouzid, Abdel-Hakim.
2022.
« Creep analysis of plastically deformed shrink-fitted joints ».
Arabian Journal for Science and Engineering, vol. 47.
pp. 8199-8210.
Moulins, Anthony, Andrusyszyn, François, Dugnani, Roberto et Zednik, Ricardo J..
2022.
« Indentation fracture toughness of semiconducting gallium arsenide at elevated temperatures ».
Engineering Failure Analysis, vol. 137.
Nadeau, S., Hof, L. et Landau, K.. 2022. « Les systèmes d'assistance numérique au service de la diversité ». Communication lors de la conférence : Congrès de l'AQHSST (Sherbrooke, QC, Canada, 11-13 mai 2022).
Nadon, Vincent et Voix, Jérémie.
2022.
« In situ otoacoustic emission monitoring to assess the effects of noise exposure on hearing health ».
Annals of Work Exposures and Health, vol. 66, nº 6.
pp. 794-807.
Naeini, Alimeh Mofidi et Nadeau, Sylvie.
2022.
« Application of FRAM to perform risk analysis of the introduction of a data glove to assembly tasks ».
Robotics and Computer-Integrated Manufacturing, vol. 74.
Naeini, Alimeh Mofidi et Nadeau, Sylvie.
2022.
« Comparing FRAM and STAMP for occupational health and safety (OHS) and operational risks analysis: The case of data gloves in assembly 4.0 production ».
[Résumé d'une communication à une conférence]. Safety and Health at Work, vol. 13.
S89.
Napoleão, Bianca Minetto, Petrillo, Fabio, Hallé, Sylvain et Kalinowski, Marcos.
2022.
« Towards continuous systematic literature review in software engineering ».
In 48th Euromicro Conference on Software Engineering and Advanced Applications (SEAA) (Gran Canaria, Spain, Aug. 31-Sept. 02, 2022)
pp. 467-474.
Naseri, Emad et Ahmadi, Ali.
2022.
« A review on wound dressings: Antimicrobial agents, biomaterials, fabrication techniques, and stimuli-responsive drug release ».
European Polymer Journal, vol. 173.
Naseri, Emad, Van Beek, Anthony et Ahmadi, Ali.
2022.
« Application of electrowetting on dielectric (EWOD) in drug release control and release-on-demand ».
Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 654.
Nassar, M., Guizani, L., Nollet, M. J. et Tahan, A..
2022.
« Seismic reliability assessment of base-isolated bridges in Quebec ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 49, nº 2.
pp. 242-254.
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2022.
« Effects of temperature, analysis and modelling uncertainties on the reliability of base-isolated bridges in Eastern Canada ».
Structures, vol. 37.
pp. 295-304.
Octaviano, Fábio, Felizardo, Katia Romero, Fabbri, Sandra, Napoleão, Bianca Minetto, Petrillo, Fabio et Hallé, Sylvain.
2022.
« SCAS-AI: a strategy to semi-automate the initial selection task in systematic literature reviews ».
In 48th Euromicro Conference on Software Engineering and Advanced Applications (SEAA) (Gran Canaria, Spain, Aug. 31-Sept. 02, 2022)
pp. 483-490.
Ollivier, S., Voix, J., Bonnet, F., Bouserhal, R., Giguère, C. et Nélisse, H.. 2022. « Design considerations for a dual hearing aid and hearing protection device for individuals with hearing loss ». Affiche présentée lors de la conférence : National Hearing Conservation Association 46th Annual Conference (En ligne, Feb. 10-12, 2022). Ollivier, Solenn, Voix, Jérémie, Giguère, Christian, Bouserhal, Rachel E., Bonnet, Fabien et Nélisse, Hugues. 2022. « Investigation of hearing device technologies for hearing-impaired individuals in noisy workplaces ». Communication lors de la conférence : International Hearing Aid Research Conference (IHCON) (Lake Tahoe, NV, USA, Aug. 10-14, 2022). Ollivier, Solenn, Voix, Jérémie, Giguère, Christian, Bouserhal, Rachel E., Bonnet, Fabien et Nélisse, Hugues. 2022. « Investigation of hearing device technologies forindividuals with hearing impairment in noisy workplaces ». Affiche présentée lors de la conférence : International Hearing Aid Research Conference (IHCON) (Tahoe City, CA, USA, Aug. 10-14, 2022).
Paas, Anita, Coffey, Emily B. J., Beltrame, Giovanni et St-Onge, David.
2022.
« Towards evaluating the impact of swarm robotic control strategy on operators' cognitive load ».
In 31st IEEE International Symposium on Robot and Human Interactive Communication (RO-MAN) (Naples, Italie, Aug. 29 - Sept. 02, 2022)
pp. 217-223.
IEEE.
Padois, Thomas, St-Jacques, Julien, Rouard, Kevin, Quaegebeur, Nicolas, Grondin, François, Berry, Alain, Nélisse, Hugues, Sgard, Franck et Doutres, Olivier.
12 janvier 2022.
« Et si on pouvait voir le bruit? ».
[Article de recherche]. Substance ÉTS.
Padois, Thomas, St-Jacques, Julien, Rouard, Kevin, Quaegebeur, Nicolas, Grondin, François, Berry, Alain, Nélisse, Hugues, Sgard, Franck et Doutres, Olivier.
12 janvier 2022.
« What if Noise Could Be Seen? ».
[Article de recherche]. Substance ÉTS.
Panerati, Jacopo, Ramtoula, Benjamin, St-Onge, David, Cao, Yanjun, Kaufmann, Marcel, Cowley, Aidan, Sabattini, Lorenzo et Beltrame, Giovanni.
2022.
« On the communication requirementsof decentralized connectivity control: A field experiment ».
In Distributed Autonomous Robotic Systems : 15th International Symposium (En ligne, June 01-04, 2021)
Coll. « Springer Proceedings in Advanced Robotics », vol. 22.
pp. 95-107.
Springer Cham.
Pasquier, Philippe et Lamarche, Louis.
2022.
« Analytic expressions for the moving infinite line source model ».
Geothermics, vol. 103.
Patin, Mathieu et Rousse, Daniel R..
2022.
« Étude des performances d’un echangeur geothermique air-sol horizontal place autour des fondations d’un batiment ».
In XVe Colloque International Franco-Québécois en énergie (CIFQ) (Paris, France, 15-17 juin 2022)
Pépin, P. et Sanjosé, M.. 2022. « Aeroacoustic analysis of an axial fan ». Communication lors de la conférence : International Conference on Fan Noise, Aerodynamics, Applications and Systems (FAN) (Senlis, France, June 27-29, 2022).
Pereira, Daniel, Le Duff, Alain, Painchaud-April, Guillaume et Belanger, Pierre.
2022.
« Simulation-based inversion for the characterization of adhesively bonded joints using ultrasonic guided waves ».
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 69, nº 7.
pp. 2400-2407.
Perna, Maxime, Padois, Thomas, Trudeau, Christopher, Bild, Edda, Laplace, Josée, Dupont, Thomas et Guastavino, Catherine.
2022.
« Comparison of road noise policies across Australia, Europe, and North America ».
International Journal of Environmental Research and Public Health, vol. 19, nº 1.
Petit, A., Petit, Y., Le Naveaux, F., Boutin, G. et Wagnac, E.. 2022. « Mechanical Behaviour of 3D printed architected cellular structure under dynamic compression and shear ». Communication lors de la conférence : 24th International Congress on Snowsports Trauma and Safety and 37th Congress of the International Society for Snowsports Medicine (ISSS-SITEHMS) (Serre-Chevalier, France, Mar. 27-Apr. 02, 2022).
Pham, Minh-Nha, Champliaud, Henri, Liu, Zhaoheng et Bonev, Ilian A..
2022.
« Parameterized finite element modeling and experimental modal testing for vibration analysis of an industrial hexapod for machining ».
Mechanism and Machine Theory, vol. 167.
Pham, Quang Hung, Antoni, Jérôme, Tahan, Antoine, Gagnon, Martin et Monette, Christine.
2022.
« Simulation of non-Gaussian stochastic processes with prescribed rainflow cycle count using short-time Fourier transform ».
Probabilistic Engineering Mechanics, vol. 68.
Pham, Quang Hung, Gagnon, Martin, Antoni, Jérôme, Tahan, Antoine et Monette, Christine.
2022.
« Prediction of hydroelectric turbine runner strain signal via cyclostationary decomposition and kriging interpolation ».
Renewable Energy, vol. 182.
pp. 998-1011. Piché, Paul, Haillot, Didier, Gibout, Stéphane et Arrabie, Cédric. 2022. « Mise en place et évaluation d'un système de stockage de la chaleur dans la serre communautaire de Kuujjuaq ». Communication lors de la conférence : Colloque annuel du Centre d'études nordiques (CEN) (En ligne, 17-18 février 2022).
Piedade, Lucas Pereira, Painchaud-April, Guillaume, Le Duff, Alain et Bélanger, Pierre.
2022.
« Minimum transmission events for fast ultrasonic TFM imaging: A comparative study ».
NDT and E International, vol. 128.
Piengang, Fabrice Chilly Ngamaleu et Beauregard, Yvan.
2022.
« Introduction to predictive maintenance based machine learning with risk and uncertaincies: A state of the art ».
In 43rd International Annual Conference of the American Society for Engineering Management, ASEM (Tampa Bay, Fl, USA - En ligne, Oct. 05-08, 2022)
pp. 668-678.
American Society for Engineering Management.
Poissenot-Arrigoni, B., Law, C. H., Berbiche, D., Doutres, O. et Sgard, F..
2022.
« Classification anthropométrique de conduits auditifs via un algorithme d’intelligence artificielle pour le design d’oreilles artificielles représentatives d’une population cible ».
In 16e Congrès Français d'Acoustique (CFA) (Marseille, France, 11-15 avril 2022)
Poissenot-Arrigoni, Bastien, Doutres, Olivier, Berbiche, Djamal, Negrini, Alessia et Sgard, Franck.
2022.
« Earcanal morphology and its relations to some attributes of earplugs comfort ».
In 28th International Congress on Sound and Vibration, ICSV (Singapore, Singapore, July 24-28, 2022)
Society of Acoustics.
Poissenot-Arrigoni, Bastien, Hong Law, Chun, Berbiche, Djamal, Sgard, Franck et Doutres, Olivier.
2022.
« Morphologic clustering of earcanals using deep learning algorithm to design artificial ears dedicated to earplug attenuation measurement ».
Journal of the Acoustical Society of America, vol. 152, nº 6.
pp. 3155-3169.
Polotski, V., Gharbi, A. et Kenne, J. P..
2022.
« Production control in manufacturing systems with perishable products under periodic demand ».
Journal of Manufacturing Systems, vol. 63.
pp. 288-303.
Polotski, Vladimir.
2022.
« Manufacturing-remanufacturing systems with uncertain return: production control with estimation-in-the-loop ».
[Article de conférence]. IFAC-PapersOnLine, vol. 55, nº 10.
pp. 2121-2126.
Polotski, Vladimir.
2022.
« Production policy optimization in the systems with perishable products under seasonal demand ».
[Article de conférence]. IFAC-PapersOnLine, vol. 55, nº 10.
pp. 2689-2694.
Pongha, Patrick Megoze, Kibouka, Guy-Richard, Kenné, Jean-Pierre et Hof, Lucas A..
2022.
« Production, maintenance and quality inspection planning of a hybrid manufacturing/remanufacturing system under production rate-dependent deterioration ».
International Journal of Advanced Manufacturing Technology, vol. 121.
pp. 1289-1314.
Pope, Emily, Cartmell, Christopher, Haltli, Bradley, Ahmadi, Ali et Kerr, Russell G..
2022.
« Microencapsulation and in situ incubation methodology for the cultivation of marine bacteria ».
Frontiers in Microbiology, vol. 13.
Prenant, Simon, Padois, Thomas, Dupont, Thomas et Doutres, Olivier.
2022.
« Numerical investigation of the effects of model uncertainties on component-based transfer path analysis method with dynamic substructuring applied to aircraft-like components ».
In Internoise - 51st International Congress and Exposition on Noise Control Engineering (Glasgow, Scotland, Aug. 21-24, 2022)
Institute of Noise Control Engineering of the USA, Inc.. Prenant, Simon, Padois, Thomas, Dupont, Thomas et Doutres, Olivier. 2022. « Numerical investigation of the effects of model uncertainties on component-based transfer path analysis method with dynamic substructuring applied to aircraft-like components ». Communication lors de la conférence : Internoise - 51st International Congress and Exposition on Noise Control Engineering (Glasgow, Scotland, Aug. 21-24, 2022).
Proteau, Antoine, Zemouri, Ryad, Tahan, Antoine, Thomas, Marc, Bounouara, Wafa et Agnard, Stéphane.
2022.
« CNC machining quality prediction using variational autoencoder: A novel industrial 2 TB dataset ».
In Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022)
pp. 360-367.
Piscataway, NJ, USA : IEEE.
Proulx, H. et Hallé, S..
2022.
« A numerical study of the impacts of outdoor air intake and air changes per hour on the trichloramine concentrations in a swimming pool enclosure ».
Frontiers in Built Environment, vol. 8.
Rahimnejad, M., Adoungotchodo, A., Joly, D., Demarquette, N. et Lerouge, S.. 2022. « FRESH bioprinting drastically enhances the printability of chitosan thermosensitive hydrogels ». Communication lors de la conférence : 37th Annual Meeting of the Canadian Biomaterials Society (Banff, AB, Canada, May 25-27, 2022).
Rahimnejad, Maedeh, Adoungotchodo, Atma, Demarquette, Nicole R. et Lerouge, Sophie.
2022.
« FRESH bioprinting of biodegradable chitosan thermosensitive hydrogels ».
Bioprinting, vol. 27.
Rainville, C., Lemaire, R. et Seers, P..
2022.
« Analysis of the sooting propensity of a jet fuel surrogate blended with different oxygenated molecules ».
In Combustion Institute - Canadian Section, Spring Technical Meeting (Ottawa, ON, Canada, May 16-19, 2022)
Raya, M. et Nadeau, S.. 2022. « Transformation 5.0 : modèles de maturité technologiques ». Affiche présentée lors de la conférence : Deuxième Forum international sur l’innovation 5.0 (Montréal, QC, Canada, 9 nov. 2022).
Reeves, Nicolas et St-Onge, David.
2022.
« Genealogy of artificial beings: From ancient automata to modern robotics ».
In
Foundations of Robotics : A Multidisciplinary Approach with Python and ROS.
pp. 3-41. Singapore : Springer Nature Singapore.
Rocha, P. H. C., Langlois, S., Lalonde, S., Araújo, J. A. et Castro, F. C..
2022.
« A general life estimation method for overhead conductors based on fretting fatigue behavior of wires ».
Theoretical and Applied Fracture Mechanics, vol. 121.
Rocha, P. H. C., Langlois, S., Lalonde, S., Araujo, J. A. et Castro, F. C.. 2022. « Life prediction of an ACSR conductor based on the similitude with fretting fatigue tests on wires ». Communication lors de la conférence : 10th International Symposium on Fretting Fatigue (ISFF10) (Louvain, Belgique, Sept. 19-21, 2022).
Romero, Alberto Alonso, Amouzou, Koffi, Richard-Denis, Andréane, Mac-Thiong, Jean-Marc, Petit, Yvan, Lina, Jean-Marc et Ung, Bora.
2022.
« Development of a wearable optoelectronic pressure sensor based on the bending loss of plastic optical fiber and polydimethylsiloxane ».
In Optical Sensors and Sensing Congress (Vancouver, BC, Canada, July 11-15, 2022)
Coll. « Technical Digest Series »
Optica Publishing Group.
Rouard, Kevin, St-Jacques, Julien, Sgard, Franck, Nélisse, Hugues, Berry, Alain, Quaegebeur, Nicolas, Grondin, François, Doutres, Olivier et Padois, Thomas.
2022.
« Numerical comparison of acoustic imaging algorithms for a spherical microphone array ».
In 9th Berlin Beamforming Conference (Berlin, Germany, June 09-10, 2022)
Rousseau, Rashique Iftekhar et Bouzid, Hakim A.. 2022. « On the stiffness of bolts and clamped members ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022).
Roussel, Y., Lemaire, R. et Seers, P..
2022.
« Syngas production from rich methane combustion in porous media ».
In Combustion Institute - Canadian Section. Spring Technical Meeting (Ottawa, ON, Canada, May 16-19, 2022)
Sabri, M., Hallé, S. et Vinches, L.. 2022. « Impression 3D : des risques pour la santé des travailleurs? ». Communication lors de la conférence : 42e congrès annuel de l'AQHSST (Sherbrooke, QC, Canada, 11-13 mai 2022).
Sadeghianmaryan, Ali, Naghieh, Saman, Salimi, Ali, Kabiri, Kourosh, Cella, Monica A. et Ahmadi, Ali.
2022.
« Fabrication of cellulosic nonwoven-based wound dressings coated with CTAB-loaded double network PAMPS/PNaA hydrogels ».
Journal of Natural Fibers, vol. 19, nº 16.
pp. 12718-12735.
Sadeghifar, Morteza, Javidikia, Mahshad, Songmene, Victor et Jahazi, Mohammad.
2022.
« A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates ».
International Journal of Advanced Manufacturing Technology, vol. 121, nº 5-6.
pp. 3977-3987.
Saint-Gaudens, Hugo, Nélisse, Hugues, Sgard, Franck et Doutres, Olivier.
2022.
« Towards a practical methodology for assessment of the objective occlusion effect induced by earplugs ».
Journal of the Acoustical Society of America, vol. 151, nº 6.
pp. 4086-4100.
Salas Gordoniz, Jorge Esteban, Reeves, Nicolas et St-Onge, David.
2022.
« Scutigera: Design, modelling and experiments for an artistic multi-body airship concept ».
Journal of Mechanisms and Robotics, vol. 14, nº 4.
Saleh Meiabadi, Mohammad, Moradi, Mahmoud, Kazerooni, Afshin et Demers, Vincent.
2022.
« Multi-objective optimisation of plastic injection moulding process using mould flow analysis and response surface methodology ».
International Journal of Materials and Product Technology, vol. 64, nº 2.
pp. 140-155.
Salem, S., Hamed, M., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H..
2022.
« Evolution and methods of residual stresses measurement in Al-Si-Cu-Mg Castings : Role of heat treatment ».
International Journal of Metalcasting, vol. 16, nº 3.
pp. 1488-1506.
Samad, Abdallah, Tagawa, Gitsuzo B. S., Rajabi Khamesi, Rasoul, Morency, François et Volat, Christophe.
2022.
« Frossling number assessment for airfoil under fully turbulent flow conditions ».
Journal of Thermophysics and Heat Transfer, vol. 36, nº 2.
pp. 389-398.
Samuel, A. M., Zedan, Y., Doty, H. W., Songmene, V. et Samuel, F. H..
2022.
« Role of the addition of La and Ce on the cooling characteristics and porosity formation in A356 and A413 alloys ».
International Journal of Metalcasting, vol. 16, nº 2.
pp. 553-572.
Samuel, Ehab, Nabawy, Ahmed M., Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy H..
2022.
« Effect of Zr and Ti addition and aging treatment on the microstructure and tensile properties of Al-2%Cu-based alloys ».
Materials, vol. 15, nº 13.
Santamaria, J., Sanjosé, M. et Moreau, S.. 2022. « Fast prediction of broadband rotor noise in hover ». Communication lors de la conférence : Canadian Society for Mechanical Engineering International Congress (CSME) (Alberta, AB, Canada, June 05-08, 2022). Sciard, M., Berry, A., Sgard, F., Robin, O. et Dupont, T.. 2022. « Estimating sound absorption coefficient under various sound pressure fields by combining an automated test bench to sound field reproduction and advanced post-processing techniques ». Communication lors de la conférence : Acoustics Week in Canada (St-John's, NL, Canada, Sept. 28-30, 2022).
Shahmiri, H. et Viens, M..
2022.
« Nondestructive evaluation of electroplating-induced hydrogen embrittlement in cadmium-coated high-strength steel using ultrasonic surface waves ».
Materials Evaluation, vol. 79, nº 11.
pp. 1094-1104.
Sheremetyev, V., Dubinskiy, S., Kudryashova, A., Prokoshkin, S. et Brailovski, V..
2022.
« In situ XRD study of stress- and cooling-induced martensitic transformations in ultrafine- and nano-grained superelastic Ti-18Zr-14Nb alloy ».
Journal of Alloys and Compounds, vol. 902.
Sheremetyev, V., Lukashevich, K., Kreitcberg, A., Kudryashova, A., Tsaturyants, M., Galkin, S., Andreev, V., Prokoshkin, S. et Brailovski, V..
2022.
« Optimization of a thermomechanical treatment of superelastic Ti-Zr-Nb alloys for the production of bar stock for orthopedic implants ».
Journal of Alloys and Compounds, vol. 928.
Sheremetyev, Vadim, Derkach, Mikhail, Churakova, Anna, Komissarov, Aleksander, Gunderov, Dmitry, Raab, Georgy, Cheverikin, Vladimir, Prokoshkin, Sergey et Brailovski, Vladimir.
2022.
« Microstructure, mechanical and superelastic properties of Ti-Zr-Nb alloy for biomedical application subjected to equal channel angular pressing and annealing ».
Metals, vol. 12, nº 10.
Sivakumaran, Lojan, Alturkistani, Husain, Lerouge, Sophie, Bertrand-Grenier, Antony, Zehtabi, Fatemeh, Thérasse, Éric, Roy-Cardinal, Marie-Hélène, Bhatnagar, Sahir, Cloutier, Guy et Soulez, Gilles.
2022.
« Strain ultrasound elastography of aneurysm sac content after randomized endoleak embolization with sclerosing vs. non-sclerosing chitosan-based hydrogels in a canine model ».
Journal of Vascular and Interventional Radiology, vol. 33, nº 5.
pp. 495-504.
Slamani, Fateh, Thibault, Denis, Verreman, Yves et Bocher, Philippe.
2022.
« A new morphology of retained austenite obtained by intercritical tempering of 13Cr-4Ni martensitic stainless steel ».
Materials Characterization, vol. 193.
Slim, Hussein et Nadeau, Sylvie.
28 mars 2022.
« Combiner l’analyse de la résonance fonctionnelle à la logique floue ».
[Article de recherche]. Substance ÉTS.
Slim, Hussein et Nadeau, Sylvie.
28 mars 2022.
« Combining Functional Resonance Analysis Method with Fuzzy Logic ».
[Article de recherche]. Substance ÉTS.
Soh, Mathieu Fokwa, Bigras, David, Barbeau, Daniel, Doré, Sylvie et Forgues, Daniel.
2022.
« Bim machine learning and design rules to improve the assembly time in steel construction projects ».
Sustainability, vol. 14, nº 1.
Sougavabar, Mahmoud Alipour, Niknam, Seyed Ali, Davoodi, Behnam et Songmene, Victor.
2022.
« Milling Al520-MMC reinforced with SiC particles and additive elements Bi and Sn ».
Materials, vol. 15, nº 4.
Sripada, Jagannadh, Tian, Yuan, Chadha, Kanwal, Saha, Gobinda, Jahazi, Mohammad, Spray, John et Aranas, Clodualdo.
2022.
« Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel ».
Materials Characterization, vol. 192.
Sta, Marwa, Tada, Dayane B., Medeiros, Simone F., Santos, Aamilton M. et Demarquette, Nicole R..
2022.
« Electrospun poly(NVCL-co-AA) fibers as potential thermo-and pH-sensitive agents for controlled release of hydrophobic drugs ».
Materials Science and Engineering: B, vol. 276.
Sta, Marwa, Tada, Dayane B., Medeiros, Simone F., Santos, Amilton M. et Demarquette, Nicole R..
2022.
« Hydrophilic drug release from electrospun membranes made out of thermo and pH-sensitive polymers ».
Journal of Drug Delivery Science and Technology, vol. 71.
St-Jacques, Julien, Rouard, Kevin, Sgard, Franck, Nélisse, Hugues, Berry, Alain, Quaegebur, Nicolas, Grondin, François, Boileau, Loic, Doutres, Olivier et Padois, Thomas.
2022.
« Effect of the error on the sound speed and microphone position on acoustic image obtained with a spherical microphone array ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 50, nº 3.
pp. 78-79.
St-Onge, David, Boucher, Corentin et Belzile, Bruno.
2022.
« Deployment of advanced robotic solutions: The ROS mobile manipulator laboratories ».
In
Foundations of Robotics: A Multidisciplinary Approach with Python and ROS.
pp. 515-536. Singapore : Springer Nature Singapore.
St-Onge, David et Herath, Damith.
2022.
« The Robot Operating System (ROS1 &2): Programming paradigms and deployment ».
In
Foundations of Robotics: A Multidisciplinary Approach with Python and ROS.
pp. 105-126. Singapore : Springer Nature Singapore.
Stower, Rebecca, Belzile, Bruno et St-Onge, David.
2022.
« Mathematical building blocks: From geometry to quaternions to bayesian ».
In
Foundations of Robotics: A Multidisciplinary Approach with Python and ROS.
pp. 127-174. Singapore : Springer Nature Singapore.
Stower, Rebecca, Zibetti, Elisabetta et St-Onge, David.
2022.
« Bots of a feather: Exploring user perceptions of group cohesiveness for application in robotic swarms ».
In 31st IEEE International Symposium on Robot and Human Interactive Communication (RO-MAN) (Naples, Italie, Aug. 29 - Sept. 02, 2022)
pp. 95-100.
IEEE.
Strugova, Daria, David, Éric et Demarquette, Nicole R..
2022.
« Linear viscoelasticity of PP/PS/MWCNT composites with co-continuous morphology ».
Journal of Rheology, vol. 66, nº 4.
pp. 671-681.
Tabaie, Seyedmohammad, Rezai-Aria, Farhad, Flipo, Bertrand C. D. et Jahazi, Mohammad.
2022.
« Dissimilar linear friction welding of selective laser melted Inconel 718 to forged Ni-based superalloy AD730: Evolution of strengthening phases ».
Journal of Materials Science and Technology, vol. 96.
pp. 248-261.
Tagiuri, Zakaria Ahmed M., Dao, Thien-My, Samuel, Agnes Marie et Songmene, Victor.
2022.
« A numerical model for predicting the effect of tool nose radius on machining process performance during orthogonal cutting of AISI 1045 Steel ».
Materials, vol. 15, nº 9.
Tagiuri, Zakaria Ahmed M., Dao, Thien-My, Samuel, Agnes Marie et Songmene, Victor.
2022.
« Numerical prediction of the performance of chamfered and sharp cutting tools during orthogonal cutting of AISI 1045 steel ».
Processes, vol. 10, nº 11.
Talbot, Marie-Hélène, Lalonde, Timothé, Beaulac, Arnaud, Haillot, Didier et Monfet, Danielle.
2022.
« Comparing the energy performance of different controlled environment agriculture spaces using TRNSYS ».
In eSim: 12th Building Simulation Conference of IBPSA-Canada (Ottawa, ON, Canada, June 22-23, 2022)
International Building Performance Simulation Association.
Talbot, Marie-Hélène, Monfet, Danielle, Lalonde, Timothé et Haillot, Didier.
2022.
« Impact of modelling thermal phenomena in a high-density controlled environment agriculture (CEA-HD) space ».
In 17th Conference of International Building Performance Simulation Association (IBPSA 2021) (Bruges, Belgium, Sept. 01-03, 2021)
pp. 1357-1364.
Terriault, Patrick, Kozanitis, Anastassis et Farand, Patrice.
2022.
« Étude comparative des performances académiques d’étudiants exposés à une classe inversée ou traditionnelle : Méthodologie et résultats préliminaires ».
In Canadian Engineering Education Association (CEEA) Conference (Toronto, ON, Canada, June 18-22, 2022)
Canadian Engineering Education Association.
Thamsuwan, Ornwipa.
2022.
« Overview of passive back-supporting exoskeleton trials on farms ».
In International Society for Agricultural Health and Safety Conference (Fort Collins, CO, USA, June 12-16, 2022)
International Society for Agricultural Health and Safety.
Thamsuwan, Ornwipa et Johnson, Peter W..
2022.
« Machine learning methods for electromyography error detection in field research : An application in full-shift field assessment of shoulder muscle activity in apple harvesting workers ».
Applied Ergonomics, vol. 98.
Thekkuden, Dinu Thomas, Mourad, Abdel-Hamid Ismail, Ramachandran, Tholkappiyan, Bouzid, Abdel-Hakim, Kumar, Ravi et Alzamly, Ahmed.
2022.
« Combined effect of tungsten inert gas welding and roller expansion processes on mechanical and metallurgical characteristics of heat exchanger tube-to-tubesheet joints ».
Journal of Materials Research and Technology, vol. 21.
pp. 4724-4744.
Thon, Aurelien, Painchaud-April, Guillaume, Le Duff, Alain et Bélanger, Pierre.
2022.
« Optimization of a Lorentz forces EMAT for the reconstruction of the circumferential thickness profile of a steel pipe using high order shear horizontal modes ».
NDT and E International, vol. 128.
Tiaya Tedonchio, Christian, Nadeau, Sylvie, Boton, Conrad et Rivest, Louis.
2022.
« Digital mock-ups as support tools for preventing risks related to energy sources in the operation stage of industrial facilities through design ».
Results in Engineering, vol. 16.
Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt.
2022.
« Analysis of assembly errors using systems thinking approach: Application of the HFACS framework ».
In Human Error, Reliability, Resilience, and Performance. AHFE (2022) International Conference (New-York, NY, USA, July 24-28, 2022)
Coll. « AHFE Open Access », vol. 33.
pp. 60-66.
AHFE International.
Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt.
2022.
« Applying AcciMap and STAMP to the analysis of human error in complex manual assembly ».
Human Factors and Ergonomics in Manufacturing & Service Industries, vol. 32, nº 6.
pp. 462-481. Touani Kameni, F., Der Sarkissian, S., Borie, M., Noiseux, N. et Lerouge, S.. 2022. « Pharmacological preconditioning protects mesenchymal stromal cells in cryopreserved microbeads for cell therapy ». Affiche présentée lors de la conférence : Till & McCulloch Meetings (Vancouver, BC, Canada, Oct. 03-05, 2022). Touani Kameni, F., Dongjin Shin, D., Aboud, D., Kietzig, A. M., Lerouge, S. et Hoesli, C.. 2022. « Microchannel emulsification for mesenchymal stromal cell microencapsulation in chitosan microbeads for cell therapy ». Communication lors de la conférence : 37th Annual Meeting of the Canadian Biomaterials Society (Banff, AB, Canada, May 25-27, 2022). Touani, F. K., Borie, M., Noiseux, N., Hoesli, C. A., Der Sarkissian, S. et Lerouge, S.. 2022. « Le préconditionnement pharmacologique protège les cellules stromales mésenchymateuses dans les microbilles cryopréservées pour la thérapie cellulaire ». Affiche présentée lors de la conférence : Journée Thécell (Montréal, QC, Canada, 14 nov. 2022).
Tsaturyants, M., Sheremetyev, V., Dubinskiy, S., Komarov, V., Polyakova, K., Korotitskiy, A., Prokoshkin, S., Borisov, E., Starikov, K., Kaledina, D., Popovich, A. et Brailovski, V..
2022.
« Structure and properties of Ti50.2Ni alloy processed by laser powder bed fusion and subjected to a combination of thermal cycling and heat treatments ».
Shape Memory and Superelasticity, vol. 8, nº 1.
pp. 16-32.
van Vugt, Floris, Pintat, Valentin, Merrett, Dawn, Bella, Simone Dalla et Voix, Jérémie.
2022.
« BRAMSBioBox: Developing an open research platform for audio and biosignals monitoring ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 50, nº 3.
pp. 60-61.
Vanderesse, Nicolas, Bocher, Philippe, Nuño, Natalia, Yánez, Alejandro et Hof, Lucas A..
2022.
« On the characterization of roughness and geometrical irregularities of additively manufactured single titanium-alloy struts ».
Additive Manufacturing, vol. 54.
Vedaei-Sabegh, Ali, Morin, Jean-Benoît, Champliaud, Henri et Jahazi, Mohammad.
2022.
« Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots ».
Journal of Materials Research and Technology, vol. 21.
pp. 3412-3424.
Vedaei-Sabegh, Ali, Morin, Jean-Benoît et Jahazi, Mohammad.
2022.
« Influence of thermally grown oxide layers thickness on temperature evolution during the forging of large size steel ingots ».
Materials Chemistry and Physics, vol. 275.
Velazquez-Salazar, A., Gnonhoue, O. G., David, E. et Preda, I..
2022.
« Dry-type high voltage capacitors ».
In IEEE 4th International Conference on Dielectrics (ICD) (Palermo, Italy, July 03-07, 2022)
pp. 41-44.
Piscataway, NJ, USA : IEEE. Vinches, Ludwig, Zemzem, Mohamed et Hallé, Stéphane. 2022. « Thermal insulation: Towards an adaptation of ISO 11092 and ISO 9920 standards for cold and windy environments ». Communication lors de la conférence : ITMC 2022 Conférence et salon des textiles intelligents (Montreal, QC, Canada, Sept. 19-21, 2022). Voix, Jérémie. 2022. « Auditory Research Platform: towards powerful toys for music researchers ». Communication lors de la conférence : Le son du futur / Le futur du son : international conference hosted by the Centre for Interdisciplinary Research in Music Media and Technology (CIRMMT) (Montreal, QC, Canada, May 24-27, 2022). Voix, Jérémie. 2022. « Behind the Hearing Care Platform app: ‘Fit-test of hearing protectors’ and ‘age of your ears’ modules ». Communication lors de la conférence : CIRMMT Workshop on Musicians' Hearing Health (Montreal, QC, Canada, May 11, 2022). Voix, Jérémie. 2022. « Behind the ÉTS-EERS industrial research chair in in-ear technologies ». Communication lors de la conférence : Le son du futur / Le futur du son : international conference hosted by the Centre for Interdisciplinary Research in Music Media and Technology (CIRMMT) (Montreal, QC, Canada, May 24-27, 2022). Voix, Jérémie. 2022. « In-ear noise dosimetry: Requirements for a new standard ». Communication lors de la conférence : 8th Workshop on ISL Battlefield Acoustics & Nato Hfm-285 Meeting (Saint-Louis, France, Oct. 19-20, 2022). Voix, Jérémie. 2022. « La protection auditive à l’heure de l’Internet des objets (IoT) ». Communication lors de la conférence : Journée Nationale de l’Audition du Québec (En ligne, 3 mai 2022).
Voix, Jérémie, Smith, Pegeen et Berger, Elliott H..
2022.
« Chapitre 12 : Field fit-testing and attenuation measurement procedures ».
In
The Noise Manual.
6th edition.
pp. 309-328. American Industrial Hygiene Association.
Vu, Viet-Hung, Thomas, Marc, Liu, Zhaoheng, Nguyen, Quoc Cuong et Do, Thanh-Trung.
2022.
« Analytical and experimental modal analysis of a flexible robot ».
In Modern Practice in Stress and Vibration Analysis (MVSPA) (Oxford, UK, July 12-14, 2022)
Wang, W. et Lemaire, R..
2022.
« Global kinetic modeling of the devolatilization of pulverized coal and poplar wood in a thermogravimetric analyzer and a flat flame reactor ».
In Combustion Institute - Canadian Section. Spring Technical Meeting (Ottawa, ON, Canada, May 16-19, 2022)
Wang, Wei, Lemaire, Romain, Bensakhria, Ammar et Luart, Denis.
2022.
« Analysis of the catalytic effects induced by alkali and alkaline earth metals (AAEMs) on the pyrolysis of beech wood and corncob ».
Catalysts, vol. 12, nº 12.
Wang, Wei, Lemaire, Romain, Bensakhria, Ammar et Luart, Denis.
2022.
« Review on the catalytic effects of alkali and alkaline earth metals (AAEMs) including sodium, potassium, calcium and magnesium on the pyrolysis of lignocellulosic biomass and on the co-pyrolysis of coal with biomass ».
Journal of Analytical and Applied Pyrolysis, vol. 163.
Wang, Wei, Lemaire, Romain, Bensakhria, Ammar et Luart, Denis.
2022.
« Thermogravimetric analysis and kinetic modeling of the AAEM-catalyzed pyrolysis of woody biomass ».
Molecules, vol. 27, nº 22.
Wei, W., Petit, Y. et Bailly, N.. 2022. « Head-ground impact conditions and helmet performance in E-scooter falls ». Communication lors de la conférence : SIMBIO-M 2022 (Marseille, France, June 21-22, 2022).
Wheatley, Sydney K., Cartmell, Christopher, Madadian, Elias, Badr, Sara, Haltli, Bradley A., Kerr, Russell G. et Ahmadi, Ali.
2022.
« Microfabrication of a micron-scale microbial-domestication pod for in situ cultivation of marine bacteria ».
RSC Advances, vol. 12, nº 43.
pp. 28123-28127. Wingert, L., Cloutier, Y., Hallé, S. et Tuduri, L.. 2022. « Performances of protective fabrics against aerosols : Effect of seams and wear ». Affiche présentée lors de la conférence : 11th International Aerosol Conference (Athens , Greece, Sept. 04-09, 2022).
Wingert, Loïc, Debia, Maximilien, Hallé, Stéphane et Marchand, Geneviève.
2022.
« Occupational microbial risk among embalmers ».
Atmosphere, vol. 13, nº 8.
Yalpanian, Ali et Guilbault, Raynald.
2022.
« A fast thermoelastic model based on the half-space theory applied to elastohydrodynamic lubrication of line contacts involving free boundaries ».
Journal of Tribology, vol. 144, nº 8.
Zaabar, Imen, Polotski, Vladimir, Berard, Léon, El-Ouaqaf, Boujemaa, Beauregard, Yvan et Paquet, Marc.
2022.
« A two-phase part family formation model to optimize resource planning: A case study in the electronics industry ».
Operational Research, vol. 22.
pp. 4441-4469.
Zedan, Y., Songmene, V., Samuel, A. M., Samuel, F. H. et Doty, H. W..
2022.
« Effects of free-cutting elements addition on the microstructure, hardness, and machinability of Al-11%Si-Cu-Mg casting alloys ».
International Journal of Metalcasting, vol. 16, nº 4.
pp. 1915-1931.
Zedan, Yasser, Garza-Elizondo, Guillermo H., Tash, Mahmoud, Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy Hosny.
2022.
« Effect of intermetallics and drill materials on the machinability of Al-Si cast alloys ».
Materials, vol. 15, nº 3.
Zedan, Yasser, Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy H..
2022.
« Effects of trace elements on the microstructural and machinability characteristics of AlSiCuMg castings ».
Materials, vol. 15, nº 1.
Zedan, Yasser, Songmene, Victor, Samuel, Agnes M., Samuel, Fawzy H. et Doty, Herbert W..
2022.
« Assessment of the influence of additives on the mechanical properties and machinability of Al-11%Si cast alloys: Application of DOE and ANOVA methods ».
Materials, vol. 15, nº 9.
Zemzem, M., Hallé, S. et Vinches, L.. 2022. « Thermal insulation capacity of cold protective clothing materials in extreme environmental conditions ». Communication lors de la conférence : Institute of Textile Science Symposium (Edmonton, AB, Canada - En ligne, Mar. 09-10, 2022).
Zemzem, Mohamed, Vinches, Ludwig et Halle, Stéphane.
2022.
« Morphological investigation of maleic anhydride-grafted nitrile/nanoclay nanocomposites ».
Materials Research Express, vol. 9, nº 8.
Zhang, Chunping, Loucif, Abdelhalim, Jahazi, Mohammad et Morin, Jean-Benoit.
2022.
« FE modelling and prediction of macrosegregation patterns in large size steel ingots: Influence of filling rate ».
Metals, vol. 12, nº 1.
Zhao, Zijian, Bouzid, Abdel-Hakim et Laghzale, Nor Eddine.
2022.
« Analysis of stresses and strains in stainless steel 316 L tubes subjected to die expansion ».
Journal of Pressure Vessel Technology, vol. 144, nº 5.
Zhu, Linbo, Pan, Hu, Yang, Yilong, Bouzid, Abdel-Hakim et Hong, Jun.
2022.
« Effect of the bending stiffness of bolted flange joints on the dynamics of aero-engine rotors ».
In ASME Pressure Vessels & Piping Conference (Las Vegas , NV, USA, July 17-22, 2022)
American Society of Mechanical Engineers (ASME).
Zhu, Linbo, Yang, Yilong, Huang, Hongwei, Bouzid, Abdel-Hakim et Hong, Jun.
2022.
« A novel method to predict the concentricity of aero-engine rotor considering the assembly process of bolted flange joints ».
In ASME Pressure Vessels & Piping Conference (Las Vegas , NV, USA, July 17-22, 2022)
American Society of Mechanical Engineers (ASME).
Zinsalo, Joël M., Lamarche, Louis et Raymond, Jasmin.
2022.
« Performance analysis and working fluid selection of an Organic Rankine Cycle Power Plant coupled to an Enhanced Geothermal System ».
Energy, vol. 245.
|
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau