| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Documents publiés en 2008Nombre de documents archivés : 859.
Khelifi, A. et Abran, Alain et Symons, Charles R., éds.
2008.
« C-Registration System ».
COSMIC.
Bouzid, Abdel-Hakim, éd.
2008.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Abenhaïm, G.N., Tahan, Antoine et Maranzana, Roland.
2008.
« Nouveau algorithme pour l'inspection des coques flexibles par déplacement itératif ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Abo El Ezz, Ahmad. 2008. « Deformation and strength based assessment of seismic failure mechanisms for existing RC frame buildings ». Mémoire de maîtrise. Italy, ROSE School
Abramowicz, Witold, Hofman, Radoslaw, Suryn, Witold et Zyskowski, Dominik.
2008.
« SQuaRE based web services quality model ».
In International MultiConference of Engineers and Computer Scientists 2008 (Hong-Kong, China, March 19-21, 2008)
pp. 827-835.
Kwun Tong, China : IAENG International Association of Engineers. Abran, A., Abu-Talib, M. et Khelifi, A.. 2008. « Software Measurement ». Communication lors de la conférence : Atelier de formation à la Zayed University (Abu Dhabi, UAE, Jan 13-17, 2008). Abran, Alain. 2008. « Les défis du génie logiciel pour la prochaine décade ». Communication lors de la conférence : Département de Génie Logiciel et des Technologies de l’Information (Montréal, QC, Canada, 12 nov. 2008). Abran, Alain. 2008. « Software Development – How to Design and Use Quantitative Models for Estimation & Productivity Comparisons ». Communication lors de la conférence : Atelier de formation au Technocentre Renault de Guyancourt (Paris, France, Mar. 10-13, 2008). Abran, Alain et Miranda, E.. 2008. « L’estimation de l’effort pour un projet logiciel : de la magie ou de l’ingénierie? ». Communication lors de la conférence : Conférence de la Communauté Bureaux de Gestion de Projets (Montréal, QC, Canada, 10 sept. 2008).
Adankon, Mathias M. et Cheriet, Mohamed.
2008.
« Help-training for semi-supervised discriminative classifiers. Application to SVM ».
In 19th International Conference on Pattern Recognition (ICPR) (Tampa, FL, USA, Dec. 8-11, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Adankon, Mathias M. et Cheriet, Mohamed.
2008.
« Model selection for LS-SVM : application to handwriting recognition ».
In 11th International Conference on Frontiers in Handwriting Recognition (ICFHR) (Montreal, QC, Canada, Aug. 19-21, 2008)
Adankon, Mathias M. et Cheriet, Mohamed. 2008. « Model selection for LS-SVM : application to handwriting recognition ». Communication lors de la conférence : 11th International Conference on Frontiers in Handwriting Recognition (ICFHR) (Montreal, QC, Canada, Aug. 19-21, 2008).
Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2008.
« Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy ».
Materials Science and Engineering: A, vol. 472, nº 1-2.
pp. 179-186.
Agba, B. L., Gagnon, François et Kouki, Ammar B..
2008.
« Channel capacity and second order statistics in tactical mobile ad hoc networks ».
In IEEE Global Telecommunications Conference (GLOBECOM) (New Orleans, LA, USA, Nov. 30-Dec. 4, 2008)
pp. 590-594.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Aguilar, J.J. et Gardoni, Mickaël. 2008. « Knowledge support system for collaborative problem definition between SMEs and research organization ». Communication lors de la conférence : International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) (Beijing, China, Oct. 8-10, 2008).
Ahmadi, A., Najjaran, H., Holzman, J. F. et Hoorfar, M..
2008.
« Numerical modeling of microdrop motion in a digital microfluidic multiplexer ».
In Technical Proceedings of the 2008 NSTI Nanotechnology Conference and Trade Show, NSTI-Nanotech, Nanotechnology 2008 (Boston, MA, USA, June 01-05, 2008)
pp. 561-564.
Boston ; Boca Raton, FL : Nano Science and Technology Institute ; CRC Press.
Aissaoui, Rachid, Desroches, G. et Boissy, P..
2008.
« Shoulder joint moment estimation during manual wheelchair propulsion using inertial motion trackers ».
In 10th International Symposium on 3D Analysis of Human Movement (3DMS) (Amsterdam, Netherlands, Oct. 28-31, 2008)
International Society of Biomechanics (ISB).
Aissaoui, Rachid et Desroches, Guillaume.
2008.
« Stroke pattern classification during manual wheelchair propulsion in the elderly using fuzzy clustering ».
Journal of Biomechanics, vol. 41, nº 11.
pp. 2438-2445. Al Haddad, Kamal (inventeur) 1 avril 2008. « Method and apparatus for providing a remedial strategy for an electrical circuit ». Pratt + Whitney Canada Corp (titulaire(s)). Brevet américain US 7,352,544.
Alazzam, Anas, Roman, Dacian, Nerguizian, Vahé, Stiharu, Ion, Bhat, Rama, Yasmeen, Amber et Al Moustafa, Ala-Eddin.
2008.
« Real-time continuous dielectrophoretic separation of malignant cells ».
In 1st Microsystems and Nanoelectronics Research Conference (MNRC) (Ottawa, Canada, Oct. 15, 2008)
pp. 45-48.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Al-Kazzaz, H., Medraj, M., Cao, X. et Jahazi, M..
2008.
« Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: modeling and experimental investigations ».
Materials Chemistry and Physics, vol. 109, nº 1.
pp. 61-76.
Al-Kazzaz, Haider, Cao, Xinjin, Jahazi, Mohammad et Medraj, Mamoun.
2008.
« Reliability of laser welding process for ZE41A-T5 magnesium alloy sand castings ».
Materials Transactions, vol. 49, nº 4.
pp. 774-781.
Alpan, Gülgün, Bauchau, Sylvain, Larbi, Rim et Penz, Bernard.
2008.
« Optimal operations scheduling in a crossdock with multi strip and multi stack doors ».
In 38th International Conference on Computers and Industrial Engineering (Beijing, China, Oct. 31-Nov 02, 2008)
pp. 1168-1176.
Beijing : Publishing House of Electronics Industry.
Aly, W. H. F., Zhani, M. F. et Elbiaze, H..
2008.
« On controlling burst loss ratio inside an OBS network ».
In IEEE Symposium on Computers and Communications, 2008. ISCC 2008 (Marrakech, Morocco, July 6-9, 2008)
pp. 56-61.
IEEE.
Amarir, Said et Al Haddad, Kamal.
2008.
« A design tool to protect industrial long cable PWM ASD systems against over-voltage problems ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Niagara Falls, Canada, May 4-7, 2008)
pp. 1699-1704.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Amarir, Said et Al Haddad, Kamal.
2008.
« A modeling technique to analyze the impact of inverter supply voltage and cable length on industrial motor-drives ».
IEEE Transactions on Power Electronics, vol. 23, nº 2.
pp. 753-762.
Amarir, Said et Al Haddad, Kamal.
2008.
« A new design tool to protect industrial long-cable PWM ASD systems against high-frequency overvoltage problems ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 33, nº 3-4.
pp. 125-132.
Amarir, Saïd et Al Haddad, Kamal.
2008.
« A new mathematical tool to investigate cable characteristics influence upon inverter output pulse voltage transients and their associated Differential mode currents for PWM drives ».
In 9th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (ELECTRIMACS) (Quebec, QC, Canada, June 8-11, 2008)
Amarir, Saïd et Al Haddad, Kamal.
2008.
« Design tool governing over-voltages in motors fed from Long Cable PWM Drives ».
In International Conference on Renewable Energy and Power Quality (ICREPQ) (Santander, Spain, March 12-14, 2008)
Amarir, Said et Al Haddad, Kamal.
2008.
« Mathematical analysis and experimental validation of transient over-voltage higher than 2 per unit along industrial ASDM long cables ».
In IEEE Power Electronics Specialists Conference (PESC) (Rhodes, Greece, June 15-19, 2008)
pp. 1846-1851.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Amarir, Said et Al Haddad, Kamal.
2008.
« Novel mathematical formulas for incident and reflected waves for differential mode analysis in long cable ASDs with experimental validations ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 1293-1298.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Amarir, Said et Al Haddad, Kamal.
2008.
« Over-voltages computation algorithm for motors fed from long cable PWM drives ».
In IEEE Mediterranean Electrotechnical Conference (MELECON) (Ajaccio, France, May 5-7, 2008)
pp. 554-559.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. April, Alain. 2008. « L'industrie manufacturière québécoise: tendances ot opportunités ». Communication lors de la conférence : Présentation au Réseau des ingénieurs du Québec, 2008). April, Alain et Abran, Alain. 2008. « Améliorer la maintenance des logiciels: une vue d'ensemble ». Communication lors de la conférence : Journée de la qualité, 2008).
April, Alain et Abran, Alain.
2008.
« Software maintenance management : evaluation and continuous improvement ».
Piscataway, N.J. : Wiley-IEEE Computer Society. 314 p.
April, Alain, Habra, N. et Counet, A..
2008.
« Software maintenance maturity model (S3mDSS): a decision support system ».
In Proceedings of the Twentieth International Conference on Software Engineering and Knowledge Engineering : San Francisco, USA, July 1 - 3, 2008 (San Francisco, CA, USA, July 1-3, 2008)
pp. 60-66.
Skokie, Illinois, USA : Knowledge Systems Institute Graduate School.
Arteau, Jean et Desjardins-David, I..
2008.
« Facteurs de réussite dans l'implantation des solutions SST, tenir compte du point de vue de tous les intervenants ».
In Congrés sur la Santé et la Sécurité du Travail (RRSSTQ-CARWH) (Montréal, QC, Canada, 15-17 juin 2008)
Arteau, Jean et Desjardins-David, Isabelle. 2008. « Facteurs de réussite dans l'implantation des solutions SST : tenir compte du point de vue de tous les intervenants ». Communication lors de la conférence : Conférence scientifique de l'ÉREST (Montréal, QC, Canada, 10 janv. 2008). Arteau, Jean et Desjardins-David, Isabelle. 2008. « L'évaluation des équipements de protection, une évaluation multi-critères ». Communication lors de la conférence : Sécurité des Travailleurs et Contrôle des Risques Industriels (Montréal, QC, Canada, 11 juin 2008).
Ata, Riadh, Soulaïmani, Azzeddine et Chinesta, Francisco.
2008.
« A Lagrangian finite volume method for the simulation of flows with moving boundaries ».
In 10th Esaform Conference on Material Forming (Saragoza, Spain, April 7, 2007)
Coll. « AIP Conference Proceedings », vol. 907.
pp. 1412-1417.
Melville, NY, USA : American Institute of Physics.
Ateme-Nguema, B., Dao, Thien-My et Songmene, Victor.
2008.
« New approach based on RSM and ants colony system for multi-objective Optimization problem: a case study ».
In 14th International Conference on Industry, Engineering, and Management Systems (IEMS) (Cocoa Beach, FL, USA, Mar. 10-12, 2008)
Awad, Fred.
2008.
« A novel approach to PID controller design ».
In Proceedings of ICEE 2008 (Pécs-Budapest, Hungary, Jul. 27-31, 2008)
Pécs : University of Pécs, Pollack Mihály Faculty of Engineering.
Awde, Ali, Bellik, Yacine et Tadj, Chakib.
2008.
« Complexity of mathematical expressions in adaptive multimodal multimedia system ensuring access to mathematics for visually impaired users ».
International Journal of Computer and Information Science and Engineering , vol. 2, nº 2.
pp. 103-115.
Awdé, Ali, Hina, Manolo Dulva, Tadj, Chakib, Bellik, Yacine et Cherif, Ramdane.
2008.
« Middleware for ubiquitous access to mathematical expressions for visually-impaired users ».
Ubiquitous Computing and Communication Journal, vol. 3, nº 5.
pp. 1-14.
Awde, Ali, Tadj, Chakib et Bellik, Yacine.
2008.
« Un systeme multi-agent pour la présentation d'expressions mathématiques à des utilisateurs non-voyants ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Niagara Falls, Canada, May 4-7, 2008)
pp. 565-568.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Inc..
Ayari, H., Thomas, Marc et Doré, Sylvie.
2008.
« Development of an injury risk factor for drivers ».
Revue Internationale sur l'Ingénierie des Risques Industriels, vol. 1, nº 2.
pp. 120-138.
Badarneh, Osamah, Kadoch, Michel et Elhakeem, Ahmed.
2008.
« A new approach for the construction of multiple multicast trees using multiple description video for wireless ad hoc networks ».
In 33rd IEEE Conference on Local Computer Networks (LCN) (Montreal, Canada, Oct. 14-17, 2008)
pp. 152-159.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Badarneh, Osamah, Kadoch, Michel et Elhakeem, Ahmed.
2008.
« Multilayered multicast algorithms for Ad Hoc wireless networks ».
In 7th WSEAS International Conference on Applied Computer & Applied Computational Science (ACACOS) (Hangzhou, China, April 6-8, 2008)
pp. 621-626.
Athens, Greece : WSEAS Press.
Badarneh, Osamah, Kadoch, Michel et Elhakeem, Ahmed.
2008.
« QoS multilayered multicast routing protocol for video transmission in heterogeneous wireless ad hoc networks ».
WSEAS Transactions on Computers, vol. 7, nº 6.
pp. 680-693.
Badarneh, Osamah, Kadoch, Michel et Elhakeen, Ahmed.
2008.
« Multilayered video multiple trees multicast Algorithms for heterogeneous wireless Ad Hoc networks ».
In IEEE International Symposium on Network Computing and Applications (NCA) (Cambridge, MA, USA, Jul. 10-12, 2008)
pp. 220-223.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Balout, Bahaa, Songmene, Victor et Masounave, Jacques.
2008.
« Perçage à sec de l'aluminium et alliages métalliques ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Baraër, Michel, McKenzie, J. M., Mark, B. G. et Palmer, S..
2008.
« Utilisation de traceurs naturels pour la modélisation de basins hydrologiques alimentés par des glaciers: Étude de cas dans la Cordillera Blanca, Pérou ».
In Actes du 4e colloque étudiant de l’Institut Hydro-Québec en environnement, développement et société (IHQEDS) (Québec, QC, Canada, 06-07 mars 2008)
Baril, Y., Brailovski, Vladimir, Chartrand, M., Terriault, Patrick et Cartier, R..
2008.
« In-vitro testing of a new superelastic sternum closure component ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 497-505.
Materials Park, OH : ASM International.
Baril, Y., Brailovski, Vladimir, Terriault, Patrick et Cartier, R..
2008.
« Modeling and testing of a new sternal closure device using tubular mesh-like superelastic nitinol structure ».
In SMST-2006 : Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Pacific Grove, CA, USA, May 7-11, 2006)
pp. 665-680.
Materials Park, OH : ASM International.
Baril, Yannick, Brailovski, Vladimir et Terriault, Patrick.
2008.
« Fatigue properties of superelastic Ti-Ni filaments used in braided cables for bone fixation ».
In Biomedical Applications of Smart Materials (Acireale, Sicily, Italy, June 8-13, 2008)
Coll. « Advances in Science and Technology », vol. 57.
pp. 235-240.
Stafa-Zurich : Trans Tech Publications Ltd.
Barré, A., Aissaoui, Rachid, Favre, J., Jolles, B. M., Thiran, J-P., Theuman, N. et Aminian, K..
2008.
« Geometric distribution of the soft tissue deformation during treadmill gait: a preliminary result ».
In European Society of Motion Analysis in Clinics (ESMAC) (London, UK, Sept. 17-19, 2008)
Barrette, M., Wong, Tony, De Kelper, Bruno et Côté, P..
2008.
« Statistical multi-comparison of evolutionary algorithms ».
In 3rd International Conference on Bioinspired Optimization Methods and their Applications (BIOMA) (Ljubljana, Slovenia, Oct. 13-14, 2008)
pp. 71-80.
Ljubljana, Slovenia : Jozef Stefan Institute.
Basile-Bellavance, Yan, Lepercq, Etienne, Blaquière, Yves et Savaria, Yvon.
2008.
« Hardware/software system co-verification of an active reconfigurable board with SystemC-VHDL ».
In 15th IEEE International Conference on Electronics, Circuits and Systems (ICECS) (St. Julian's, Malta, Aug. 31-Sept. 03, 2008)
pp. 1159-1162.
IEEE.
Batista, Luana, Rivard, Dominique, Sabourin, Robert, Granger, Éric et Maupin, Patrick.
2008.
« State of the art in off-line signature verification ».
In
Pattern recognition technologies and applications : recent advances.
pp. 39-62. Hershey, PA : Information Science Reference.
Baudoin, Aurelien, Skalli, W., de Guise, Jacques A. et Mitton, David.
2008.
« Parametric subject-specific model for in vivo 3D reconstruction using bi-planar X-rays: Application to the upper femoral extremity ».
Medical and Biological Engineering and Computing, vol. 46, nº 8.
pp. 799-805.
Beauchamp, B., Lamarche, L. et Kajl, S..
2008.
« A dynamic model of a vertical direct expansion ground heat exchanger ».
Renewable Energy and Power Quality Journal, vol. 1, nº 6.
pp. 545-551.
Beauchamp, B., Lamarche, Louis et Kajl, Stanislaw.
2008.
« Direct expansion ground-coupled heat pump : experimental results ».
In Air Conditioning, Protection & District Heating: XII International Conference, Wroclaw - Szklarska Poreba, 26-29 June 2008 (Wroclaw, Poland, June 26-29, 2008)
pp. 33-39.
Wroclaw : Edition PZITS.
Beaulieu, M. N. et Botez, Ruxandra M..
2008.
« Simulation and prediction of main rotor, tail rotor, and engine parameters from flight tests ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 222, nº 6.
pp. 817-834.
Beaupré, A. et St-Jacques, Michèle.
2008.
« Conception de carrefours giratoires au Québec - doit-on suivre le mouvement tel quel ou entreprendre des actions ».
In 43e Congrès Annuel de l'Association Québécoise du Transport et des Routes (AQTR) (Québec, QC, Canada, 14-16 avril 2008)
Montréal, Canada : AQTR. Beauregard, Yvan. 2008. « Lean engineering systems for product development in the aerospace industry ». Communication lors de la conférence : IIE Annual Conference and Expo 2008 : May 17-21, Westin Bayshore, Vancouver, British Columbia, Canada : how businesses take flight (Vancouver, BC, Canada, May 17-21, 2008).
Beauregard, Yvan, Bhuiyan, Nadia et Thomson, Vincent.
2008.
« Lean engineering systems for product development in the aerospace industry ».
In IIE Annual Conference and Expo 2008 (Vancouver, BC, Canada, May 17-21, 2008)
pp. 1515-1520.
Norcross, GA, USA : Institute of Industrial Engineers.
Beauregard, Yvan, Thomson, Vincent et Bhuiyan, Nadia.
2008.
« Lean engineering logistics: load leveling of design jobs with capacity considerations ».
Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada, vol. 54, nº 2.
pp. 19-30.
Bel Haj Youssef, Nesrine, Al Haddad, Kamal et Kanaan, Hadi Y..
2008.
« Real-time implementation of a discrete nonlinearity compensating multiloops control technique for a 1.5-kW three-phase/switch/level Vienna converter ».
IEEE Transactions on Industrial Electronics, vol. 55, nº 3.
pp. 1225-1234.
Bel Haj Youssef, Nesrine, Al Haddad, Kamal et Kanaan, Y..
2008.
« Sensorless nonlinear control of a three-phase/ switch/ level vienna rectifier based on a numerical reconstruction of DC and AC voltages ».
In IEEE Industry Applications Society Annual Meeting (IAS) (Edmonton, Canada, Oct. 5-9, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bel Haj Youssef, Nesrine, Al-Haddad, Kamal et Kanaan, Hadi Y..
2008.
« Implementation of a new linear control technique based on experimentally validated small-signal model of three-phase three-level boost-type Vienna rectifier ».
IEEE Transactions on Industrial Electronics, vol. 55, nº 4.
pp. 1666-1676.
Bel Haj Youssef, Nesrine, Al-Haddad, Kamal et Kanaan, Hadi Y..
2008.
« Large-signal modeling and steady-state analysis of a 1.5-kW three-phase/switch/level (Vienna) rectifier with experimental validation ».
IEEE Transactions on Industrial Electronics, vol. 55, nº 3.
pp. 1213-1224.
Belanger, P. et Cawley, P..
2008.
« LAMB wave tomography to evaluate the maximum depth of corrosion patches ».
In 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007)
Coll. « AIP Conference Proceedings », vol. 975.
pp. 1290-1297.
AIP.
Bélisle, J. G. et Forgues, D..
2008.
« L'amélioration des pratiques de l'entrepreneur spécialisé par le benchmarking ».
In Canadian Society for Civil Engineering - Annual Conference of the Canadian Society for Civil Engineering 2008 - "Partnership for Innovation" (Québec, QC, Canada, June 10-13, 2008)
Coll. « Proceedings, Annual Conference - Canadian Society for Civil Engineering »
pp. 105-114.
Canadian Society for Civil Engineering.
Belleau, Christian et de Lafontaine, J..
2008.
« A new design approach for Pulse-Width Pulse-Frequency modulator ».
In Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
Kingston, ON, Canada : CSME.
Ben Ayed, Ismail, Li, Shuo, Islam, Ali, Garvin, Greg et Chhem, Rethy.
2008.
« Area prior constrained level set evolution for medical image segmentation ».
In Medical Imaging 2008: Image Processing (San Diego, CA, USA, Feb. 17-19, 2008)
Coll. « Proceedings of SPIE », vol. 6914.
pp. 691402-691401.
The International Society for Optical Engineering.
Ben Ayed, Ismail, Li, Shuo et Ross, Ian.
2008.
« Tracking distributions with an overlap prior ».
In 2008 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) (Anchorage, AK, USA, June 23-28, 2008)
IEEE.
Ben Ayed, Ismail et Mitiche, Amar.
2008.
« A region merging prior for variational level set image segmentation ».
IEEE Transactions on Image Processing, vol. 17, nº 12.
pp. 2301-2311.
Ben Ayed, Ismail et Mitiche, Amar.
2008.
« Merging active contours ».
In Advances in Visual Computing. 4th International Symposium, ISVC 2008, Las Vegas, NV, USA, December 1-3, 2008. Proceedings, Part II (Las Vegas, NV, USA, Dec. 1-3, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5359.
pp. 181-191.
Springer Verlag.
Ben Ayed, Ismail, Yingli, Lu, Li, Shuo et Ross, Ian.
2008.
« Left ventricle tracking using overlap priors ».
In Medical Image Computing and Computer-Assisted Intervention – MICCAI 2008. 11th International Conference, New York, NY, USA, September 6-10, 2008, Proceedings, Part I (Berlin, Germany, Sept. 6-10, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5241.
pp. 1025-1033.
Springer-Verlag.
Ben Haj Ali, Amine et Soulaïmani, Azzeddine.
2008.
« Combined functional and geometrical decompositions for multiphysis problems with application to fluid-structure interaction ».
In 22nd International Symposium on High Performance Computing Systems and Applications (HPCS) (Quebec, Canada, June 9-11, 2008)
pp. 124-130.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ben Salah, Mohamed, Ben Ayed, Ismail et Mitiche, Amar.
2008.
« Multiregion graph cut image segmentation ».
In VISAPP 2008 - Proceedings of the Third International Conference on Computer Vision Theory and Applications - Volume 1 (Funchal, Portugal, Jan. 22-25, 2008)
pp. 535-538.
Institute for Systems and Technologies of Information, Control and Communication.
Ben Salah, Mohamed, Mitiche, Amar et Ben Ayed, Ismail.
2008.
« A continuous labeling for multiphase graph cut image partitioning ».
In Advances in Visual Computing. Proceedings 4th International Symposium, ISVC 2008, Las Vegas, NV, USA, December 1-3, 2008. Proceedings, Part I (Berlin, Germany, Dec. 1-3, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5358.
pp. 268-277.
Springer-Verlag.
Bengherabi, Messaoud, Mezai, Lamia, Harizi, Farid, Cheriet, Mohamed et Guessoum, Abderrazak.
2008.
« Face recognition based on 2DPCA, DIAPCA and DIA2DPCA in DCT domain ».
In 5th International Multi-Conference on Systems, Signals and Devices (SSD) (Amman, Jordan, Jul. 20-22, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Bengherabi, Messaoud, Mezai, Lamia, Harizi, Farid, Guessoum, Abderrazak et Cheriet, Mohamed.
2008.
« Score fusion of SVD and DCT-RLDA for face recognition ».
In 1st International Workshops on Image Processing Theory, Tools and Applications (IPTA) (Sousse, Tunisia, Nov. 23-26, 2008)
Piscataway, NJ , USA : Institute of Electrical and Electronics Engineers Computer Society.
Benhalla, S., Gharbi, Ali et Olivier, Claude.
2008.
« Multi plant cellular manufacturing design within a supply chain ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Ben-Sik-Ali, O., Cardinal, C. et Gagnon, François.
2008.
« Outage probability analysis of interference cancellation receiver in wireless DS-CDMA ad hoc networks ».
In IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Cannes, France, Sept.15-18, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bensoussan, David.
2008.
« Commande moderne : approche par modèles continus et discrets ».
Montréal, Canada : Presses Internationales Polytechnique. 396 p.
Bensoussan, David.
2008.
« Téléphonie numérique et téléphonie IP ».
Québec : Presses de l’Université du Québec. 252 p.
Bensoussan, David et Hammami, Maher.
2008.
« Arbitrarily fast tracking feedback systems for a class of nonlinear plants ».
In Proceedings of the 17th IFAC World Congress (Coex, South Korea, July 6-11, 2008)
Coll. « World Congress », vol. 17.
pp. 12200-12205.
Laxenburg, Australia : International Federation of Automatic Control.
Bergamini, Cheila, Oliveira, Luiz S., Koerich, Alessandro L. et Sabourin, Robert.
2008.
« Fusion of biometric systems using one-class classification ».
In IEEE International Joint Conference on Neural Networks (IJCNN) (Hong Kong, China, June 1-8, 2008)
pp. 1308-1313.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Berger, Elliott H., Voix, Jérémie et Hager, Lee D..
2008.
« Methods of fit testing hearing protectors, with representative field test data ».
In ICBEN 2008 : the 9th Congress of the International Commuission on the Biological Effects of Noise : Noise as a Public Health Problem : Proceedings (Mashantucket, CT, USA, July 21-25, 2008)
ICBEN.
Bernier, Simon, Parpal, Jean-Luc, David, Éric, Jean, Daniel et Lalancette, Daniel.
2008.
« Dielectric response of laboratory aged PE cables ».
In Conference Record of the 2008 IEEE International Symposium on Electrical Insulation (ISEI) (Vancouver, Canada, June 9-12, 2008)
pp. 645-649.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Berthiaume, François, Gravel, Pierre et de Guise, Jacques A..
2008.
« Bone enhancement in digital dual energy radiographs from normalization with a synthetic background image ».
Physics in Medicine and Biology, vol. 53, nº 5.
pp. 1259-1275.
Bertolini, D., Oliveira, L.S., Justino, E. et Sabourin, Robert.
2008.
« Ensemble of classifiers for off-line signature verification ».
In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Singapore, Singapore, Oct.12-15, 2008)
pp. 283-288.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bertrand, C. et Fuhrman, Christopher.
2008.
« Towards defining software development processes in DO-178B with OpenUP ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Niagara Falls, Canada, May 4-7, 2008)
pp. 851-854.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bigras, Pascal, Lambert, Michel et Perron, Claude.
2008.
« New optimal formulation for an industrial robot force controller ».
International Journal of Robotics and Automation, vol. 23, nº 3.
pp. 199-208.
Biskri, D. E. et Botez, Ruxandra.
2008.
« Method for aerodynamic unsteady forces time calculations on an F/A-18 aircraft ».
Aeronautical Journal, vol. 112, nº 1127.
pp. 27-32.
Biskri, D. E., Botez, Ruxandra, Stathopoulos, N., Therien, S., Dickinson, M. et Rathe, A..
2008.
« Aeroservoelasticity analysis method based on an error analytical form applied on a business aircraft ».
Journal of Vibration and Control, vol. 14, nº 8.
pp. 1217-1230.
Bizi, Claudia Maria Pena et Demarquette, Nicole R..
2008.
« Effect of the processing conditions and the addition of trans-polyoctenylene rubber on the properties of natural rubber/styrene–butadiene rubber blends ».
Journal of Applied Polymer Science, vol. 109, nº 1.
pp. 445-451.
Blanchette, H.F. et Al Haddad, Kamal.
2008.
« A new approach to solve EMI related problems when designing reliable high power converters using precomputed electromagnetic models ».
In IEEE Power Electronics Specialists Conference (PESC) (Rhodes, Greece, June 15-19, 2008)
pp. 4405-4411.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Blum, Guillaume.
2008.
« Une informatique humainement acceptable est-elle possible ? De l’aliénation à l’émancipation ».
Nouvelles pratiques sociales, vol. 21, nº 1.
pp. 52-67. Boivin, K., Hagemeister, N., Turcot, K., Pelletier, M., Aissaoui, R., Prince, F. et de Guise, J. A.. 2008. « Détermination de paramètres biomécaniques sensible à la gonarthrose ou à son niveau de sévérité à partir d'un analyse de la cinématique dans le plan frontal à la marche ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Boivin, K., Hagemeister, Nicola, Turcot, K., Pelletier, M., Aissaoui, Rachid, Prince, F. et de Guise, Jacques A.. 2008. « Comparative study of the frontal kinematics knee pattern during gait between asymptomatic subjects and knee osteoarthritis patients. ». Affiche présentée lors de la conférence : 13th Annual Meeting Gait and Clinical Movement Analysis Society (Richmond, VA, USA, Apr. 2-5, 2008).
Boivin, Karine, Hagemeister, Nicola, Turcot, Katia, Pelletier, Michel, Aissaoui, Rachid, Prince, François et de Guise, Jacques A..
2008.
« The relationship of frontal plane knee kinematics with knee alignment and adduction moment ».
[Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 41, nº suppl. 1.
S206.
Bonenfant, D., Kharoune, Mourad, Niquette, Patrick, Mimeault, M. et Hausler, Robert.
2008.
« Advances in principal factors influencing carbon dioxide adsorption on zeolites ».
Science and Technology of Advanced Materials, vol. 9, nº 1.
pp. 1-7.
Bonenfant, Danielle, Kharoune, Lynda, Sauvé, Sébastien, Hausler, Robert, Niquette, Patrick, Mimeault, M. et Kharoune, Mourad.
2008.
« CO2 sequestration by aqueous red mud carbonation at ambient pressure and temperature ».
Industrial and Engineering Chemistry Research, vol. 47, nº 20.
pp. 7617-7622.
Bonenfant, Danielle, Kharoune, Lynda, Sauvé, Sébastien, Hausler, Robert, Niquette, Patrick, Mimeault, Murielle et Kharoune, Mourad.
2008.
« CO2 sequestration potential of steel slags at ambient pressure and temperature ».
Industrial and Engineering Chemistry Research, vol. 47, nº 20.
pp. 7610-7616.
Bonev, Ilian.
2008.
« Direct kinematics of zero-torsion parallel mechanisms ».
In IEEE International Conference on Robotics and Automation (ICRA) (Pasadena, CA, USA, May 19-23, 2008)
pp. 3851-3856.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bonev, Ilian, Briot, Sébastien, Wenger, Philippe et Chablat, Damien.
2008.
« Changing assembly modes without passing parallel singularities in non-cuspidal 3-RPR planar parallel robots ».
In Second International Workshop on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators (ParallelWorkshop) (Montpellier, France, Sept. 21-22, 2008)
pp. 197-200.
Botez, Ruxandra et Cotoi, Iulian.
2008.
« Aerodynamic force optimization for aircraft ».
In International Conference on Engineering Optimization (EngOpt) (Rio de Janeiro, Brazil, June 1-5, 2008)
Rio de Janeiro : OptimizE - Engineering Optimization Lab.
Botez, Ruxandra, Grigorie, L. et Hiliuta, A..
2008.
« Analytical and simulation method validation for flutter aeroservoelasticity studies ».
In AVT-156 Advanced Aeroelasticity NATO Meeting (Loen, Norway, May 5-9, 2008)
Botez, Ruxandra, Grigorie, Lucian, Hiliuta, Adrian et Ciocan, L..
2008.
« Rigid and control modes aerodynamic unsteady forces aeroservoelastic modeling ».
Journal of Guidance, Control, and Dynamics, vol. 31, nº 5.
pp. 1372-1385.
Bouchard, T., Hemon, M., Gagnon, François, Gravel, V. et Munger, O..
2008.
« Mobile telephones used as boarding passes : enabling technologies and experimental results ».
In 4th International Conference on Autonomic and Autonomous Systems (ICAS) (Gosier, Guadaloupe, March 16-21, 2008)
pp. 255-259.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society. Boudreault, J.-P., Dubé, Jean-Sébastien, Chouteau, M., Winiarski, T., Giroux, B. et Fontaine, P.-O.. 2008. « Caractérisation géophysique d'un remblai urbain apport complémentaire d'une modélisation radar et de résistivité électrique ». Communication lors de la conférence : Colloque de l'Association d'Hydrogéophysique du Québec, 76e Congrès de l'ACFAS (Québec, QC, Canada, Mai 2008).
Boufaden, Narjès et Dumouchel, Pierre.
2008.
« Leveraging emotion detection using emotions form yes-no answers ».
In 9th International Conference of Speech Communication Association 2008 (INTERSPEECH) (Brisbane, Australia, Sept. 22-26, 2008)
pp. 241-244.
International Speech Communications Association.
Bougataya, Mohammed, Lakhsasi, Ahmed, Norman, Richard, Prytula, Richard, Blaquière, Yves et Savaria, Yvon.
2008.
« Steady state thermal analysis of a reconfigurable wafer-scale circuit board ».
In IEEE Canadian Conference on Electrical and Computer Engineering (CCECE) (Niagara Falls, ON, Canada, May 04-07, 2008)
pp. 411-415.
IEEE.
Bouharras, M., Dziong, Zbigniew, Gagnon, François et Haider, M..
2008.
« Multi-objective scheduling for MUD based Ad-Hoc networks ».
In Proceedings of the 4th Annual International Conference on Wireless Internet (Maui, HI, USA, Nov. 17-19, 2008)
New York, NY, USA : ACM Press.
Bouharras, M., Dziong, Zbigniew, Gagnon, François et Haider, M..
2008.
« Scheduling optimization in multiuser detection based MAC design for ad-hoc networks ».
In 33rd IEEE Conference on Local Computer Networks (LCN) (Montreal, Canada, Oct. 14-17, 2008)
pp. 655-660.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Bouikni, Nadjib, Rivest, Louis et Desrochers, Alain.
2008.
« A multiple views management system for concurrent engineering and PLM ».
Concurrent Engineering: Research and Applications, vol. 16, nº 1.
pp. 61-72. Boulé, Marc. 2008. « Assertion-checker synthesis for hardware verification, in-circuit debugging and on-line monitoring ». Thèse de doctorat. Montréal, McGill, 238 p. Boulé, Marc. 2008. « L'outil MBAC et la synthèse de circuits vérificateurs d’assertions ». Communication lors de la conférence : Laboratoire TIMA-VDS, Institut National Polytechnique de Grenoble (Grenoble, France, Fév. 2008).
Boulé, Marc et Zilic, Zeljko.
2008.
« Assertion checkers - Enablers of quality design ».
In 1st Microsystems and Nanoelectronics Research Conference (MNRC) (Ottawa, ON, Canada, Oct. 15, 2008)
pp. 97-100.
IEEE.
Boulé, Marc et Zilic, Zeljko.
2008.
« Automata-based assertion-checker synthesis of PSL properties ».
ACM Transactions on Design Automation of Electronic Systems, vol. 13, nº 1.
Boulé, Marc et Zilic, Zeljko.
2008.
« Generating hardware assertion checkers: For hardware verification, emulation, post-fabrication debugging and on-line monitoring ».
Springer. 279 p. Bourgeois, Y., Duke, K., Laflamme, G.-Y., Brailovski, Vladimir et Petit, Yvan. 2008. « Évaluation expérimentale du déplacement du grand trochanter après fixation avec plaques ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Bourque, Pierre. 2008. « Estimating effort and cost in software projects - ISBSG a multi-organizational data repository for project estimation and benchmarking ». Communication lors de la conférence : VII Jornadas Iberoamericanas de Ingenieria de Software e Ingenieria del Conocimiento (Guayaquil, Ecuador). Bourque, Pierre. 2008. « Estimating effort and cost in software projects - ISBSG a multi-organizational project data repository for project estimation and benchmarking ». Communication lors de la conférence : IEEE Computer Society Distinguished Visitor Program (Oklahoma City, OK, USA). Bourque, Pierre. 2008. « The maturation of software engineering as a discipline and a recognized profession ». Communication lors de la conférence : IEEE Montreal Chapter, IEEE Computer Society Distinguished Visitor Program (Montreal, QC, Canada, March 19, 2008). Bourque, Pierre. 2008. « The maturation of software engineering as a discipline and a recognized profession ». Communication lors de la conférence : IEEE Computer Society Distinguished Visitor Program (Guayaquil, Ecuador, January 31, 2008).
Bousselham, Abdelhak et Chaallal, Omar.
2008.
« Mechanisms of shear resistance of concrete beams strengthened in shear with externally bonded FRP ».
Journal of Composites for Construction, vol. 12, nº 5.
pp. 499-512.
Boutana, N., Bocher, P., Jahazi, M., Piot, D. et Montheillet, F..
2008.
« Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 32, nº 2.
pp. 195-213.
Boutana, N., Bocher, Philippe, Jahazi, M., Piot, D. et Montheillet, F..
2008.
« The microstructural modeling of room temperature creep in titanium alloys using cellular automata model ».
International Journal of Microstructure and Materials Properties, vol. 3, nº 4-5.
pp. 642-653. Bouzid, Hakim et Laghzale, N.. 2008. « An analytical solution of hydraulicaly expanded tube-to-tubesheet joints with linear strain hardening material behaviour ». Communication lors de la conférence : Third International Conference on Engineering Failure Analysis (ICEFA-III) (Barcelona, Spain, July 13-16, 2008).
Bouzid, Hakim et Nechache, Akli.
2008.
« On the use of Belleville washers to reduce relaxation in bolted flange joints ».
In ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, Jul. 27-31, 2008)
pp. 3-10.
New York, NY, USA : American Society of Mechanical Engineers.
Bouzidane, A. et Thomas, Marc.
2008.
« An electrorheological hydrostatic journal bearing for controlling rotor vibration ».
Computers and Structures, vol. 86, nº 3-5.
pp. 463-472.
Bouzidane, A., Thomas, Marc et Lakis, A. A..
2008.
« Nonlinear dynamic behavior of a rigid rotor supported by hydrostatic squeeze film dampers ».
Journal of Tribology, vol. 130, nº 4.
041102-1. Brailovski, Vladimir. 2008. « Manufacturing of nanostructured Ti-Ni shape memory alloys ». Communication lors de la conférence : International Conference Strength of the Heterogeneous Structures (PROST) (Moscou, Russia, Apr. 8-10, 2008). Brailovski, Vladimir. 2008. « Pecularities of the structure and properties of nanostructured Ti-Ni alloy subjected to the thermomechanical processing ». Communication lors de la conférence : International Conference "Strength of the Heterogeneous Structures" (PROST) (Moscou, Russia, Apr. 8-10, 2008).
Brailovski, Vladimir, Prokoshkin, S., Inaekyan, K., Korotitskiy, A. et Glezer, A..
2008.
« Structure and properties features of nanostructured Ti0Ni SMA after severe plastic deformation and post-deformation annealing ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 17-26.
Materials Park, OH : ASM International.
Brailovski, Vladimir, Terriault, Patrick, Coutu, D., Georges, T., Morellon, E., Fischer, C. et Bérubé, S..
2008.
« Morphing laminar wing with flexible extrados powered by shape memory alloy actuators ».
In ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) (Ellicott, USA, Oct. 28-30, 2008)
pp. 615-623.
New York, NY, USA : American Society of Mechanical Engineers.
Briot, Sébastien, Arakelian, Vigen, Bonev, Ilian A., Chablat, Damien et Wenger, Philippe.
2008.
« Self-motions of general 3-RPR planar parallel robots ».
The International Journal of Robotics Research, vol. 27, nº 7.
pp. 855-866.
Briot, Sébastien et Bonev, Ilian.
2008.
« A pair of measures of rotational error for axisymmetric robot end-effectors ».
In Advances in Robot Kinematics: Analysis and Design (Batz-sur-Mer, France, June 22-26, 2008)
pp. 345-352.
Springer Netherlands.
Briot, Sébastien et Bonev, Ilian.
2008.
« Singularity analysis of zero-torsion parallel mechanisms ».
In IEEE International Conference on Intelligent Robots and Systems (IROS) (Nice, France, Sept. 22-26, 2008)
pp. 1952-1957.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Briot, Sébastien et Bonev, Ilian A..
2008.
« Accuracy analysis of 3-DOF planar parallel robots ».
Mechanism and Machine Theory, vol. 43, nº 4.
pp. 445-458.
Brlek, Srecko, Lachaud, Jacques-Olivier et Provençal, Xavier.
2008.
« Combinatorial view of digital convexity ».
In Discrete Geometry for Computer Imagery : 14th IAPR International Conference, DGCI 2008, Proceedings (Lyon, France, Apr. 16-18, 2008)
Coll. « Lecture notes in computer science », vol. 4992.
pp. 57-68.
Springer.
Brodeur, Philippe et Masson, Christian.
2008.
« Numerical site calibration over complex terrain ».
Journal of Solar Energy Engineering, vol. 130, nº 3.
031020 (12 p.).
Brosseaud, Y. et St-Jacques, Michèle.
2008.
« Warm-mix asphalt - overview of this new technology in France ».
In Transport Research Arena Europe 2008 (TRA) (Ljubljana, Slovenia, Apr. 21-24, 2008)
Buglione, Luigi et Abran, Alain.
2008.
« Performance calculation and estimation with QEST/LIME using ISBSG Release 10 data ».
In Software Measurement European Forum (SMEF) (Milan, Italy, May 28-30, 2008)
pp. 175-192.
Buglione, Luigi et Abran, Alain. 2008. « Performance calculation and estimation with QEST/LIME using ISBSG Release 10 data ». Communication lors de la conférence : Software Measurement European Forum (SMEF) (Milan, Italy, May 28-30, 2008).
Bulgak, Akif Asii, Alzaman, Chaher et Ramudhin, Amar.
2008.
« Incorporating the cost of quality in supply chain design ».
In Portland International Conference on Management of Engineering and Technology (PICMET) (Cape Town, South Africa, Jul. 27-31, 2008)
pp. 1650-1655.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Buntinas, Darius, Coti, Camille, Herault, Thomas, Lemarinier, Pierre, Pilard, Laurence, Rezmerita, Ala, Rodriguez, Eric et Cappello, Franck.
2008.
« Blocking vs. non-blocking coordinated checkpointing for large-scale fault tolerant MPI Protocols ».
Future Generation Computer Systems, vol. 24, nº 1.
pp. 73-84.
Cameron, G. et Assaf, G..
2008.
« Le beton compacte au rouleau haute performance dans la province de Quebec ».
In Annual Conference of the Canadian Society for Civil Engineering 2008 - "Partnership for Innovation"; Quebec City, QC; Canada; 10 June 2008 through 13 June 2008 (Québec, QC, Canada, June 10-13, 2008)
Coll. « Proceedings, Annual Conference - Canadian Society for Civil Engineering »
pp. 1808-1817.
Canadian Society for Civil Engineering.
Canetto, Pierre et Voix, Jérémie.
2008.
« Hearing protectors “real world” performance and the European Directive 2003/10/EC ».
Noise/News International, vol. 16, nº 4.
pp. 134-138.
Cao, X., Guo, M. et Jahazi, M..
2008.
« Continuous wave ND:YAG laser welding of Ti-6A1-4V titanium alloy ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 197-208.
Canadian Institute of Mining Metallurgy & Petroleum.
Cao, X. et Jahazi, M..
2008.
« Overview of friction stir and laser welding techniques for lightweight alloys ».
Canadian Welding Association Journal.
pp. 19-30.
Cao, X., Jahazi, M., Afrin, N. et Chen, D. L..
2008.
« Fatigue properties of friction stir welded AZ31B magnesium alloy ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 377-389.
Canadian Institute of Mining Metallurgy & Petroleum.
Cao, X., Jahazi, M., Al-Kazzaz, H. et Medraj, M..
2008.
« Modelling of work-hardening behaviour for laser welded magnesium alloy ».
International Journal of Materials Research, vol. 99, nº 2.
pp. 216-221.
Cao, X., Jahazi, M., Fournier, J. et Alain, M..
2008.
« Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings ».
Journal of Materials Processing Technology, vol. 205, nº 1–3.
pp. 322-331.
Cao, X., Rivaux, B., Jahazi, M. C., Cuddy, J. et Birur, A..
2008.
« Effect of joint gap on Inconel 718 alloy quality welded using 4 kW continuous wave ND:YAG laser ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 313-324.
Canadian Institute of Mining Metallurgy & Petroleum.
Cao, X., Xiao, M., Jahazi, M., Fournier, J. et Alain, M..
2008.
« Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method ».
Materials and Manufacturing Processes, vol. 23, nº 4.
pp. 413-418.
Carastan, DaniloJustino, Demarquette, Nicole Raymonde, Vermogen, Alexandre et Masenelli-Varlot, Karine.
2008.
« Linear viscoelasticity of styrenic block copolymers–clay nanocomposites ».
Rheologica Acta, vol. 47, nº 5-6.
pp. 521-536.
Cardinal, Patrick, Dumouchel, Pierre, Boulianne, Gilles et Comeau, Michel.
2008.
« GPU accelerated acoustics likelihood computations ».
In 9th Annual Conference of the International Speech Communication Association (INTERSPEECH) (Brisbane, Australia, Sept. 22-26, 2008)
pp. 964-967.
Bonn, Germany : International Speech Communication Association.
Caron, Annie, Leconte, Robert et Brissette, François.
2008.
« An improved stochastic weather generator for hydrological impact studies ».
Canadian Water Resources Journal = Revue canadienne des ressources hydriques, vol. 33, nº 3.
pp. 233-256.
Carter, Alan, Herman, Antoine, Perraton, Daniel et Ortega, Fernando.
2008.
« Rutting resistance and complex modulus of cold-in-place recycled materials ».
In Proceedings of the Fifty-Third Annual Conference of the Canadian Technical Asphalt Association (CTAA): Saskatoon, Saskatchewan, November 2008 (Saskatoon, SK, Canada, Nov. 17-19, 2008)
Coll. « Proceedings of the ... annual Conference of Canadian Technical Asphalt Association », vol. 53.
pp. 313-331.
Laval, Québec : Polyscience Publications.
Catley, A. J., Samson, C. et Van Geel, P. J..
2008.
« Seismic velocity analysis to determine moisture distribution in a bioreactor landfill ».
Journal of Solid Waste Technology and Management, vol. 34, nº 2.
pp. 81-90.
Cavalin, Paulo R., Sabourin, Robert, Suen, Ching Y. et Britto Jr., Alceu S..
2008.
« Evaluation of incremental learning algorithms for an HMM-based handwritten isolated digits recognizer ».
In 11th International Conference on Frontiers in Handwriting Recognition (ICFHR) (Montreal, Canada, Aug. 19-21, 2008)
Chaabane, A, Ramudhin, Amar et Paquet, Marc.
2008.
« Trade-off model for carbon market sensitive green supply chain network design ».
In Sixth Annual International Symposium on Supply Chain Management (Calgary, AB, Canada, Oct. 15-17, 2008)
Chaabane, Amin, Ramudhin, Amar, Paquet, Marc et Benkaddour, Mohammed Amine.
2008.
« An integrated logistics model for environmental conscious supply Chain network design ».
In 14th Americas Conference on Information Systems (AMCIS 2008) (Toronto, ON, Canada, Aug. 14-17, 2008)
pp. 523-527.
Atlanta, GA , USA : AIS/ICIS Administrative Office.
Chaallal, Omar.
2008.
« Structures en béton armé - Calcul selon la norme ACNOR A23.3-04 ».
Québec, Canada : Presses de l'Université du Québec. 418 p.
Chaari, N. et Blum, G..
2008.
« Technicisation de la politique : de la critique à l’ébauche d’un cadre d’analyse ».
In Actes de la 5e journée Humanisme et Gestion (Bordeaux, France, 17 avril 2008)
Bordeaux Management school.
Chakraborty, Bhaskar, Pedersoli, Marco et Gonzalez, Jordi.
2008.
« View-invariant human action detection using component-wise HMM of body parts ».
In 5th International Conference on Articulated Motion and Deformable Objects (AMDO) 2008, July 9, 2008 - July 11, 2008 (Port d'Andratx, Mallorca, Spain, July 09-11, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5098.
pp. 208-217.
Springer Verlag.
Chatelain, Jean-François, Roy, Réjean et Mayer, René.
2008.
« Development of a spiral trajectory for high speed roughing of light alloy aerospace components ».
WSEAS Transactions on Applied and Theoretical Mechanics, vol. 3, nº 3.
pp. 83-93.
Chayer, Boris, de Guise, Jacques A. et Cloutier, Guy.
2008.
« Effect of depth of correlation on cross-correlation blood flow measurements in glass microchannels ».
In 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro (ISBI) (Paris, France, May 14-18, 2008)
pp. 1359-1362.
IEEE.
Cheriet, Mohamed.
2008.
« Visual recognition of Arabic handwriting : challenges and new directions ».
In Arabic and chinese handwriting recognition : SACH 2006 Summit College Park, MD, USA, September 27-28, 2006 : selected papers (College Park, MD, USA, Sept. 27-28, 2006)
Coll. « Lecture Notes in Computer Science », vol. 4768.
pp. 1-21.
Berlin, Heidelberg : Springer-Verlag.
Cheriet, Mohamed et Farrahi Moghaddam, M..
2008.
« Degradation modeling and enhancement of low quality documents ».
In 5th International Workshop on Signal Processing and its Applications (WOSPA) (Sharjah, United Arab Emirates, Mar. 18-20, 2008)
Cheriet, Mohamed et Farrahi Moghaddam, R.. 2008. « Low quality image processing for DIAR : issues and directions ». Communication lors de la conférence : 16th European Signal Processing Conference (EUSIPCO) (Lausanne, Switzerland, Aug. 25-29, 2008).
Cheriet, Mohamed et Farrahi Moghaddam, R..
2008.
« Processing of low quality document images : issues and directions ».
In 16th European Signal Processing Conference (EUSIPCO) (Lausanne, Switzerland, Aug. 25-29, 2008)
[Kessariani]; Lausanne : European Association for Signal Processing ; École polytechnique fédérale de Lausanne.
Cheriet, Mohamed et Moghaddam, Reza Farrahi.
2008.
« DIAR: advances in degradation modeling and processing ».
In Image Analysis and Recognition : 5th International Conference, ICIAR 2008, Povoa de Varzim, Portugal, June 25-27, 2008 : Proceedings (Povoa de Varzim, Portugal, June 25-27, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5112.
pp. 1-10.
Berlin, Germany : Springer Verlag.
Chiocchio, François et Forgues, Daniel.
2008.
« Le rôle des objets-frontières dans l’apprentissage et la performance d’équipes d’étudiants travaillant à des projets de conception de bâtiments ».
Revue internationale des technologies en pédagogie universitaire, vol. 5, nº 3.
pp. 6-21. Chion, C., Lamontagne, P., Turgeon, S., Parrott, L., Landry, Jacques-André, Marceau, D., Michaud, R., Ménard, N. et Albuquerque, C.. 2008. « Pattern-oriented modeling strategy to elaborate a spatially explicit agent-based model dynamically guided by human decision-making ». Communication lors de la conférence : International Conference on Ecological Informatics 6 (ICEI) (Cancun, Mexico, Dec. 2-5, 2008).
Chion, Clement, Landry, Jacques-André et Da Costa, Luis.
2008.
« A genetic-programming-based method for hyperspectral data information extraction: Agricultural applications ».
IEEE Transactions on Geoscience and Remote Sensing, vol. 46, nº 8.
pp. 2446-2457.
Chouinard, Marc, D'Amours, Sophie et Aït-Kadi, Daoud.
2008.
« A stochastic programming approach for designing supply loops. ».
International Journal of Production Economics, vol. 113, nº 2.
pp. 657-677. Clément, J., Petit, Y., Jaafar, E., Lavigne, P., Lussier, B. et Hagemeister, N.. 2008. « 3D kinematics study of canine hind limb during stance phase of trot: design of an experimental device ». Affiche présentée lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Clément, J., Petit, Y., Jaafar, E., Lavigne, P., Lussier, B. et Hagemeister, N.. 2008. « Étude cinématique 3D de la phase d’appui au trot du membre arrière canin : conception d’un montage expérimental ». Affiche présentée lors de la conférence : VIIIème Journée de la Recherche de l’Hôpital du Sacré-Coeur (Montréal, QC, Canada, 2008).
Clément, Olivier, Benoit, Jocelyn et Paquette, Eric.
2008.
« Efficient editing of aged object textures ».
In 5th International Conference on Computer Graphics, Virtual Reality, Visualisation and Interaction in Africa (AFRIGRAPH) (Grahamstown, South africa, Oct. 29-31, 2007)
pp. 151-158.
New York, NY, USA : ACM Press. Coallier, François. 2008. « Gouvernance et compétence en TI ». Communication lors de la conférence : 4e Séminaire sur les Meilleures Pratiques en Gestion des TI (Québec, QC, Canada, 21 oct. 2008). Coallier, François. 2008. « Ingénierie et génie logiciel ». Communication lors de la conférence : 40ème Anniversaire du Génie Logiciel (Montréal, QC, Canada, 12 nov. 2008). Coallier, François. 2008. « International standardization in software engineering ». Communication lors de la conférence : IEEE Computer Society, Technology Summit (Las Vegas, NV, USA, May 13, 2008). Coallier, François. 2008. « What does engineering mean in software engineering? ». Communication lors de la conférence : 8th International Conference on Software Process Improvement and Capability dEtermination (SPICE) (Nuremberg, Germany, May 26-28, 2008). Coallier, François. 2008. « What does engineering means in software engineering? ». Communication lors de la conférence : Consortium for Software Engineering Research Fall Meeting (CSER) (Toronto, ON, Canada, Oct. 16, 2008).
Comeau, M., Masson, Christian, Morency, François et Pelletier, F..
2008.
« Mapping mean annual icing hours for the Québec wind energy industry ».
In 18th International Offshore and Polar Engineering Conference (ISOPE) (Vancouver, BC, Canada, July 6-11, 2008)
pp. 692-699.
Cupertino, CA, USA : International Society of Offshore and Polar Engineers.
Condori-Fernandez, Nelli, Pastor, Oscar, Abran, Alain et Sellami, Asma.
2008.
« Introduciendo conceptos de metrologia en el diseno de medidas de software ».
In IDEAS 2008 : XI Iberoamerican Workshop on Requirements Engineering and Environments (CIbSE) (Pernambuco, Brazil, Feb. 11-15, 2008)
pp. 59-70.
Condori-Fernandez, Nelly, Pastor, Oscar, Abran, Alain et Sellami, Asma.
2008.
« Introducing metrology concepts in the design of software measures ».
In Memorias de la 11th Conferencia Iberoamericana de Software Engineering - CIbSE 2008 (Recife, Pernambuco, Brazil, Feb. 13-17, 2008)
Spain : Conferencia Iberoamericana de Software Engineering - CIbSE.
Condori-Fernandez, Nelly, Pastor, Oscar, Daneva, Maya, Abran, Alain et Castro, Jaelson.
2008.
« Quantifying functional reuse from object-oriented requirements specifications ».
In 11th Workshop on Requirements Engineering (WER) (Barcelona, Spain, Sept. 12-13, 2008)
pp. 59-69.
Connolly, Jean-François, Granger, Éric et Sabourin, Robert.
2008.
« Supervised incremental learning with the fuzzy ARTMAP neural network ».
In Artificial Neural Networks in Pattern Recognition. Third IAPR Workshop (ANNPR) (Paris, France, Jul. 2-4, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5064.
pp. 66-77.
Berlin, Germany : Springer Verlag. Constantin, Nicolas (inventeur) 29 juillet 2008. « Dynamic biasing system for an amplifier ». Skyworks Solutions, Inc. (titulaire(s)). Brevet américain US 7,405,617.
Coti, Camille, Herault, Thomas et Cappello, Franck.
2008.
« MPI applications on grids: A topology-aware approach ».
Institut national de recherche en sciences et technologies du numérique (INRIA). 21 p.
Coti, Camille, Herault, Thomas, Peyronnet, Sylvain, Rezmerita, Ala et Cappello, Franck.
2008.
« Grid services for MPI ».
In 8th IEEE International Symposium on Cluster Computing and the Grid (Lyon, France, May 19-22, 2008)
pp. 417-424.
Coulibaly, A., Gardoni, Mickaël, Huang, Y. et Maranzana, Roland.
2008.
« Multi-users dynamic maintenance document for complex mechanical products, application for automobile ».
In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) (New-York, NY, USA, Aug. 3-6, 2008)
pp. 125-133.
New York, NY, USA : American Society of Mechanical Engineers.
Coulombe, Stéphane.
2008.
« Real-time multi-user transcoding for Push to talk over Cellular ».
In 2nd International Conference on Next Generation Mobile Applications, Services, and Technologies (NGMAST) (Cardiff, Wales, UK, Sept. 16-19, 2008)
pp. 351-356.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Crainic, Teodor Gabriel, Errico, Fausto, Malucelli, Federico et Nonato, Maddalena.
2008.
« Designing the master schedule for demand-adaptive transit systems ».
In PATAT 2008 : The 7th Conference on the Practice and Theory of Automated Timetabling (Montreal, QC, Canada, Aug. 18-22, 2008)
Coll. « PATAT Conference »
EURO Working Group on Automated Timetabling.
Cresson, T., Godbout, B., Branchaud, D., Chav, R., Gravel, P. et de Guise, Jacques A..
2008.
« Surface reconstruction from planar x-ray images using moving least squares ».
In 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS) (Vancouver, Canada, Aug. 20-25, 2008)
pp. 3967-3970.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society. Cresson, T., Humbert, L., Branchaud, D., Godbout, B., Chav, R., Parent, S., Skalli, W. et de Guise, Jacques A.. 2008. « SterEOS - logiciel pour la reconstruction 3D en clinique à partir de plusieurs radiographies sterEOS ». Communication lors de la conférence : 38e Réunion Annuelle de la Société de la Scoliose du Québec (Québec, QC, Canada, 6-8 nov. 2008).
Crobeddu, E., Allali, S. et Bennis, S..
2008.
« Washoff model of total suspended particles in urban areas ».
WIT Transactions on Ecology and the Environment, vol. 111.
pp. 351-360.
Cryans, Jean-Daniel, April, Alain et Abran, Alain.
2008.
« Criteria to compare cloud computing with current database technology ».
In Software Process and Product Measurement : International Workshop IWSM 2008, Metrikon 2008, and Mensura 2008 Munich, Germany, November 18-19, 2008. Proceedings (Munich, Germany, Nov. 17-19, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5338.
pp. 114-126.
Heidelberg, Germany : Springer Verlag.
Cuadrado-Gallego, Juan J. et Abran, Alain.
2008.
« Special issue on software process and product measurement ».
[Éditorial]. Journal of Systems and Software, vol. 81, nº 5.
pp. 601-602.
Da Costa, Luis, Landry, Jacques-André et Levasseur, Yan.
2008.
« Treating noisy data sets with relaxed genetic programming ».
In Artificial Evolution : 8th International Conference, Evolution Artificielle, EA 2007, Tours, France, October 29-31, 2007, Revised Selected papers (Tours, France, Oct. 29-31, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4926.
pp. 1-12.
Berlin, Germany : Springer-Verlag.
Dalpé, Benoit et Masson, Christian.
2008.
« Numerical study of fully developed turbulent flow within and above a dense forest ».
Wind Energy, vol. 11, nº 5.
pp. 503-515.
Dastous, P. A., Nikiema, J., Maréchal, D., Racine, L. et Lacoursière, J. P..
2008.
« Risk management: All stakeholders must do their part ».
Journal of Loss Prevention in the Process Industries, vol. 21, nº 4.
pp. 367-373.
Dastous, P. A., Nikiema, J., Soreanu, G., Bibeau, L. et Heitz, M..
2008.
« Elimination of methanol and ethanol by biofiltration: An experimental study ».
Water, Air, and Soil Pollution: Focus, vol. 8, nº 3-4.
pp. 275-285.
Dauchez, Nicolas, Doutres, Olivier, Génevaux, Jean Michel et Lemarquand, Guy.
2008.
« A new setup for measuring the mechanical properties of porous materials ».
In Acoustics '08 Paris : June 29 - July 4, 2008 ; abstracts (Paris, France, June 29-July 4, 2008)
Société Française d'Acoustique.
Dauchez, Nicolas, Doutres, Olivier, Génevaux, Jean-Michel et Lemarquand, Guy.
2008.
« A new set-up to measure the viscoelastic properties of porous media using a specific electrodynamic transducer ».
In SAPEM 2008 : Symposium on the Acoustics of Poro-Elastic Materials ; from concept to application and beyond ; 17 - 18 - 19 December 2008, Univ. of Brandford, UK (Bradford, UK, Dec. 17-19, 2008)
University of Bradford.
David, Éric, Sami, A., Soltani, R., Frechette, M. F. et Savoie, S..
2008.
« Low-frequency dielectric response of epoxy-based polymer composites ».
In Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Quebec, Canada, Oct. 26-29, 2008)
pp. 505-508.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Davis, Carlton R., Neville, Stephen, Fernandez, J.-M., Robert, Jean-Marc et McHugh, John.
2008.
« Structured peer-to-peer overlay networks : ideal botnets command and control infrastructures? ».
In Computer Security - ESORICS 2008 : 13th European Symposium on Research in Computer Security, Malaga, Spain, October 6-8, 2008 : Proceedings (Malaga, Spain, Oct. 6-8, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5283.
pp. 461-480.
Berlin, Germany : Springer-Verlag.
De Crescenzo, Gregory, Woodward, Lyne et Srinivasan, Bala.
2008.
« Online optimization of surface plasmon resonance-based biosensor experiments for improved throughput and confidence ».
Journal of Molecular Recognition, vol. 21, nº 4.
pp. 256-266.
Dehak, Najim, Dehak, Réda, Kenny, Patrick et Dumouchel, Pierre.
2008.
« Comparison between factor analysis and GMM support vector machines for speaker verification ».
In Odyssey : the Speaker and Language Recognition Workshop (Stellenbosch, South Africa, Jan. 21-24, 2008)
Dehak, R., Dehak, N., Kenny, P. et Dumouchel, Pierre.
2008.
« Linear and non linear kernel GMM support vector machines for speaker verification ».
In 8th Annual Conference of the International Speech Communication Association (Interspeech) (Antwerp, Belgium, Aug. 27-31, 2007)
pp. 733-736.
Bonn, Germany : International Speech Communication Association.
Dehak, Réda, Dehak, Najim, Kenny, Patrick et Dumouchel, Pierre.
2008.
« Kernel combination for SVM speaker verification ».
In Odyssey : the Speaker and Language Recognition Workshop (Stellenbosch, South Africa, Jan. 21-24, 2008)
Dehayem Nodem, F. I., Kenné, Jean-Pierre et Gharbi, Ali.
2008.
« A replacement policy of deteriorating production systems subject to imperfect repairs ».
In 3rd IEEE Conference on Industrial Electronics and Applications (ICIEA) (Singapore, Singapore, June 3-5, 2008)
pp. 6-11.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Dehayem Nodem, F.I., Kenné, Jean-Pierre et Gharbi, Ali.
2008.
« Joint optimization of capacity expansion, production and maintenance in stochastic manufacturing systems ».
Applied Mathematical Sciences, vol. 2, nº 5.
pp. 195-212.
Delaporte, R., Landry, René Jr, Sahmoudi, M. et Guay, J.-C..
2008.
« A robust RTK software for high-precision GPS positioning ».
In European Navigation Conference (ENC-GNSS) (Toulouse, France, Apr. 23-25, 2008)
Delhoménie, Marie-Caroline, Nikiema, Josiane, Bibeau, Louise et Heitz, Michèle.
2008.
« A new method to determine the microbial kinetic parameters in biological air filters ».
Chemical Engineering Science, vol. 63, nº 16.
pp. 4126-4134. Dellagi, S., Rezg, N. et Gharbi, Ali. 2008. « Contribution au développement d'une politique de maintenance intégrée selon une stratégie de commutation des sous-traitants ». Communication lors de la conférence : 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, 31 mars-2 avril 2008).
Dellagi, S., Rezg, N. et Gharbi, Ali.
2008.
« Contribution au développement d'une politique de maintenance intégrée selon une stratégie de commutation des sous-traitants ».
In 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, 31 mars-2 avril 2008)
Dellagi, S., Rezg, N. et Gharbi, Ali.
2008.
« Optimal policy for a manufacturing system subjected to random failure and calling upon several subcontractors ».
In IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapor, Singapor, Dec. 8-11, 2008)
pp. 2127-2131.
Piscataway, N.J. : Institute of Electrical and Electronics Engineers. Dellagi, S., Rezg, N. et Gharbi, Ali. 2008. « Optimal policy for a manufacturing system subjected to random failure and calling upon several subcontractors ». Communication lors de la conférence : IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapor, Singapor, Dec. 8-11, 2008).
Demarquette, Nicole R., Carastan, Danilo J. et Valera, Ticiane S..
2008.
« Clay-Containing Styrenic Compounds ».
In
Polymer Nanocomposite Research Advances.
pp. 327-378. New-York, NY : Nova Science Publishers.
Demoly, F., Gomes, S., Eynard, B., Rivest, Louis et Sagot, J.-C..
2008.
« Towards a collaborative DFA approach based on PLM ».
In 2nd CIRP Conference on Assembly Technologies & Systems (CATS) (Toronto, ON, Canada, Sept. 21-23, 2008)
pp. 100-113.
Desfossés, Y., Laporte, Claude Y., April, Alain et Berrhouma, Nabil.
2008.
« Méthode d'amélioration des services de TI, basée sur ITIL, dans les entreprises québécoises ».
Génie Logiciel, nº 86.
pp. 47-59.
Desgroux, P., Mercier, X., Lefort, B., Lemaire, R., Therssen, E. et Pauwels, J. F..
2008.
« Soot volume fraction measurement in low-pressure methane flames by combining laser-induced incandescence and cavity ring-down spectroscopy: Effect of pressure on soot formation ».
Combustion and Flame, vol. 155, nº 1–2.
pp. 289-301.
Desjardins-David, I. et Arteau, Jean.
2008.
« Factors of success in OSH solution implantation:Answers to everyone's concerns ».
In 9th Annual Inter-Regional Human Factors Conference, Human Factors and Ergonomics Society student chapter (Buffalo, NY, USA, Oct. 18, 2008)
Desjardins-David, Isabelle et Arteau, Jean. 2008. « L'évaluation des équipements de protection, une évaluation multicritère ». Communication lors de la conférence : Séminaire CSSS de la Pointe de l'Île, groupe de Santé au travail (Montréal, QC, Canada, 11 sept. 2008).
Deslandes, Dominic et Boone, François.
2008.
« General formulation for modeling bandpass filters with finite quality factors and resistive couplings ».
In European Microwave Conference (EuMC) (Amsterdam, Netherlands, Oct. 27-31, 2008)
pp. 1042-1045.
IEEE.
Desmarais, Mathieu et Aissaoui, Rachid.
2008.
« Modeling of knee articular cartilage dissipation during gait analysis ».
Journal of Mechanics in Medicine and Biology, vol. 8, nº 3.
pp. 377-394.
Desroches, G., Aissaoui, Rachid et Bourbonnais, D..
2008.
« Les contraintes à l'épaule en fonction du patron de propulsion manuelle en fauteuil roulant chez la personne âgée ».
In 5e Colloque Québécois sur le Positionnement et la Mobilité (Saint-Hyacinthe, QC, Canada, 28-29 avril 2008)
Desroches, G., Aissaoui, Rachid et Bourbonnais, D..
2008.
« Relationship between resultant force at the pushrim and the net shoulder joint moments during manual wheelchair propulsion in elderly persons ».
Archives of Physical Medicine and Rehabilitation, vol. 89, nº 6.
pp. 1155-1161.
Desroches, Guillaume, Aissaoui, Rachid et Bourbonnais, Daniel.
2008.
« The effect of resultant force at the pushrim on shoulder kinetics during manual wheelchair propulsion: a simulation study ».
IEEE Transactions on Biomedical Engineering, vol. 55, nº 4.
pp. 1423-1431.
Dhouib, K., Gharbi, Ali et Ayed, S..
2008.
« Availability and throughput of unreliable, unbuffered production lines with non-homogeneous deterministic processing times ».
International Journal of Production Research, vol. 46, nº 20.
pp. 5651-5677.
Dhouib, K, Gharbi, Ali et Ayed, S.
2008.
« Simulation based throughput assessment of non-homogeneous transfer lines ».
International Journal of Simulation Modelling, vol. 8, nº 1.
pp. 5-15.
Dias de Assuncao, Marcos et Buyya, Rajkumar.
2008.
« A cost-aware resource exchange mechanism for load management across Grids ».
In 14th IEEE International Conference on Parallel and Distributed Systems (ICPADS'08) (Melbourne, VIC, Australia, Dec. 08-10, 2008)
pp. 213-220.
IEEE Computer Society.
Dias de Assuncao, Marcos et Buyya, Rajkumar.
2008.
« Performance analysis of multiple site resource provisioning: Effects of the precision of availability information ».
In High Performance Computing - HiPC 2008 : 15th International Conference, Bangalore, India, December 17-20, 2008. Proceedings (Bangalore, India, Dec. 17-20, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5374.
pp. 157-168.
Springer Verlag.
Dias de Assuncao, Marcos, Buyya, Rajkumar et Venugopal, Srikumar.
2008.
« Inter Grid: A case for internetworking islands of Grids ».
Concurrency and Computation: Practice and Experience, vol. 20, nº 8.
pp. 997-1024. Dixon, L., Herd, R.K., Samson, C. et Hunt, P.A.. 2008. « Mineralogy and textures of the ordinary chondrite Saratov ». Communication lors de la conférence : 6th Canadian Space Exploration Workshop: Canadian Scientific Priorities for the Global Exploration Strategy (Montreal, QC, Canada, Dec. 01-03, 2008).
Dolez, Patricia, Nohile, C., Anh, T. H., Vu-Khanh, Toan, Benoit, R. et Bellavigna-Ladoux, O..
2008.
« Exploring the chemical aspects of truck tire blowouts and explosions ».
Safety Science, vol. 46, nº 9.
pp. 1334-1344.
Dolez, Patricia, Vu-Khanh, Toan, Nguyen, C.Thang, Guero, Gbeuli, Gauvin, Chantal et Lara, Jaime.
2008.
« Influence of medical needle characteristics on the resistance to puncture of protective glove materials ».
Journal of ASTM International, vol. 5, nº 1.
Domingue, F., Kouki, Ammar B. et Mansour, R. R..
2008.
« Improved distributed MEMS matching network for low frequency applications using a slow-wave structure ».
In IEEE MTT-S International Microwave Symposium Digest (Atlanta, GA, USA, June 15-20, 2008)
pp. 1279-1282.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Domingue, Frederic, Fomani, Arash A., Kouki, Ammar B. et Mansour, Raafat R..
2008.
« Distributed phase shifter with enhanced variability and impedance matching ».
In European Microwave Conference (EuMC) (Amsterdam, The Netherlands, Oct. 27-31, 2008)
pp. 108-111.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Dos Santos, Eulanda M., Sabourin, Robert et Maupin, Patrick.
2008.
« A dynamic overproduce-and-choose strategy for the selection of classifier ensembles ».
Pattern Recognition, vol. 41, nº 10.
pp. 2993-3009.
Dos Santos, Eulanda M., Sabourin, Robert et Maupin, Patrick.
2008.
« Pareto analysis for the selection of classifier ensembles ».
In 10th Annual Genetic and Evolutionary Computation Conference (GECCO) (Atlanta, GA, USA, Jul. 12-16, 2008)
pp. 681-688.
New York, NY, USA : Association for Computing Machinery.
Dos Santos, Eulanda M., Sabourin, Robert, Oliveira, Luiz S. et Maupin, Patrick.
2008.
« Overfitting in the selection of classifier ensembles : a comparative study between PSO and GA ».
In 10th Annual Genetic and Evolutionary Computation Conference (GECCO) (Atlanta, GA, USA, Jul. 12-16, 2008)
pp. 1423-1424.
New York, NY, USA : Association for Computing Machinery. Doshi, Bharat T., Dziong, Zbigniew, Nagarajan, Ramesh et Qureshi, Muhammad A. (inventeurs) 11 novembre 2008. « Connection set-up extension for restoration path establishment in mesh networks ». Lucent Technologies Inc. (titulaire(s)). Brevet américain US 7,451,340. Doutres, O., Dauchez, N., Génevaux, J. M. et Dazel, O.. 2008. « Validity of the one-dimensional limp model for porous materials ». Affiche présentée lors de la conférence : 12th International Student Conference on Electrical Engineering (Prague, Czech Republic, May 15, 2008).
Doutres, O., Dauchez, N., Génevaux, J. M. et Dazel, O..
2008.
« Validity of the one-dimensional limp model for porous media ».
Acta Polytechnica, vol. 48, nº 3.
pp. 61-65.
Doutres, Olivier, Dauchez, Nicolas, Génevaux, Jean Michel et Dazel, Olivier.
2008.
« Investigation of the limp model validity for porous materials ».
In Acoustics '08 Paris : June 29 - July 4, 2008 ; abstracts (Paris, France, June 29-July 4, 2008)
Société Française d'Acoustique.
Doutres, Olivier, Dauchez, Nicolas, Genevaux, Jean-Michel et Lemarquand, Guy.
2008.
« On the use of a loudspeaker for measuring the viscoelastic properties of sound absorbing materials ».
Journal of the Acoustical Society of America, vol. 124, nº 6.
EL335-EL340. Draisey, S.D., Mullins, M.L., Samson, C., Holladay, S., Lee, J. et Lim, D.. 2008. « Integrated mobile platform for near-surface briny water detection on Mars ». Communication lors de la conférence : 6th Canadian Space Exploration Workshop: Canadian Scientific Priorities for the Global Exploration Strategy (Montreal, QC, Canada, Dec. 01-03, 2008).
Dubé, Jean-Sébastien, Boudreault, J. P., Bost, R. et Hardy, E..
2008.
« Laboratory sampling of urban anthropogenic soil ».
In Annual Conference of Canadian Society for Civil Engineering (Quebec, QC, Canada, June 10-13, 2008)
pp. 827-837.
Montreal, Canada : Canadian Society for Civil Engineering.
Dubé, Jean-Sébastien, Boudreault, J. P., Chouteau, M., Fontaine, P. O., Giroux, B., Winiarski, T. et Hardy, E..
2008.
« Modelling the geophysical and structural heterogeneity of urban anthropogenic soils ».
In Annual Conference of Canadian Society for Civil Engineering (Quebec, QC, Canada, June 10-13, 2008)
pp. 838-848.
Montreal, Canada : Canadian Society for Civil Engineering. Dubé, Jean-Sébastien, Boudreault, J.-P., Bost, R. et Hardy, E.. 2008. « Representative sampling of soil for environmental analyses : application of Gy's theory of sampling to the analysis of heavy metals in soil samples ». Communication lors de la conférence : European Geosciences Union General Assembly (Vienne, Austria, Apr. 13-18, 2008). Dubé, Jean-Sébastien, Boudreault, J.-P., Bost, R. et Hardy, É.. 2008. « Échantillonnage représentatif des sols contaminés ». Communication lors de la conférence : 2e Conférence Québécoise d'Hydrogéophysique (Montréal, QC, Canada, 28 nov. 2008). Dubé, Jean-Sébastien, Winiarski, T., Boudreault, J.-P., Goutaland, D., Chouteau, M., Angulo-Jaramillo, R., Arambourou, H., Bièvre, G., Giroux, B. et Hardy, E.. 2008. « Environmental geophysics in urban areas ». Communication lors de la conférence : European Geosciences Union Gereral Assembly (Vienne, Austria, Apr. 13-18, 2008).
Dubé, M., Hubert, P., Yousefpour, A. et Denault, J..
2008.
« Current leakage prevention in resistance welding of carbon fibre reinforced thermoplastics ».
Composites Science and Technology, vol. 68, nº 6.
pp. 1579-1587.
Dubé, Martine, Hubert, Pascal, Gallet, Jan N. A. H., Stavrov, Darko, Bersee, Harald E. N. et Yousefpour, Ali.
2008.
« Fatigue performance characterisation of resistance-welded thermoplastic composites ».
Composites Science and Technology, vol. 68, nº 7–8.
pp. 1759-1765.
Dubourg, L., Amargier, R. et Jahazi, M..
2008.
« Relationship between FSW parameters, hardness and tensile properties of 7075-T6 and 2098-T851 similar but welds ».
In 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008)
TWI Ltd.
Dubourg, L., Merati, A., Gallant, M. et Jahazi, M..
2008.
« Manufacturing of aircraft panels by friction stir lap welding of 7075-T6 stringers on 2024-T3 skin: process optimization and mechanical properties ».
In 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008)
TWI Ltd.
Dubousset, J., Charpak, G., Skalli, W., de Guise, Jacques A., Kalifa, G. et Wicart, P..
2008.
« Modélisation vertébrale et squelettique par le système EOS ».
Archives de Pédiatrie, vol. 15, nº 5.
pp. 665-666.
Dubousset, Jean, Charpak, Georges, Dorion, Rène, Lavaste, François, Skalli, Wafa, Deguise, Jacques, Kalifa, Gabriel et Ferey, Solène.
2008.
« New technique for 2D/3D low-dose bone and joint imaging in the upright position ».
[Résumé d'une communication à une conférence]. Orthopaedic Proceedings, vol. 90-B, nº SUPP_II.
p. 253. Duke, K., Laflamme, G.-Y. et Petit, Yvan. 2008. « Modèle éléments finis d'un système de fixation du grand trochanter ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Duke, Kajsa, Laflamme, G.-Yves et Petit, Yvan. 2008. « Biomechanical simulation of a greater trochanter fixation system ». Communication lors de la conférence : Proceedings of the 2008 North American Congress of Biomechanics (Ann Arbor, USA, Aug. 5-9, 2008).
Duval, O., Punchihewa, A., Gagnon, François, Despins, Charles et Bhargava, V. K..
2008.
« Blind multi-sources detection and localization for cognitive radio ».
In IEEE Global Telecommunications Conference (GLOBECOM) (New Orleans, LA, USA, Nov. 30-Dec. 4, 2008)
pp. 2962-2966.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Duxbury, A., White, D. et Samson, C.. 2008. « 2-D Reflection seismic processing across a volcanogenic massive sulfide mine site; Flin Flon, Manitoba ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Apr. 10-11, 2008).
El Boussaidi, Ghizlane et Mili, Hafedh.
2008.
« Detecting patterns of poor design solutions using constraint propagation ».
In Model driven engineering languages and systems : 11th international conference, MoDELS 2008, Toulouse, France, September 28 - October 3, 2008 : proceedings (Toulouse, France, Sept. 28 - Oct. 3, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5301.
pp. 189-203.
New York, NY, USA : Springer.
El Hachimi, Mohamed, Breton, Marc-Andre et Bennani, Maria.
2008.
« Efficient QoS implementation for MPLS VPN ».
In 22nd International Conference on Advanced Information Networking and Applications (AINA) (Gino-wan, Okinawa, Japan, March 25-28, 2008)
pp. 259-263.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
El Hani, M.A., Rivest, Louis et Fortin, C..
2008.
« Propagating engineering changes to manufacturing process planning: does PLM meet the need? ».
In 4th International Conference on Product Lifecycle Management (PLM) (Milan, Italy, July 11-13, 2007)
pp. 517-526.
Geneve, Switzerland : Inderscience Enterprises Limited.
El Kasmi, Amina et Masson, Christian.
2008.
« An extended k–ε model for turbulent flow through horizontal-axis wind turbines ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 96, nº 1.
pp. 103-122.
El-Asmar, M., Hamdane, W., Birafane, A. et Kouki, Ammar B..
2008.
« Efficiency vs. linearity trade-offs in outphasing power amplifiers ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Niagara Falls, Canada, May 4-7, 2008)
pp. 1165-1168.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
El-Bazzal, Zouhair, Kadoch, Michel, Agba, Basile L., Haidar, Mohamad et Gagnon, François.
2008.
« A quality of service driven approach for clustering in mobile ad hoc networks based on metrics adaptation : looking beyond clustering ».
Journal of Communications Software and Systems, vol. 4, nº 4.
pp. 254-265.
El-Rich, M., Wagnac, Éric, Arnoux, P. J. et Aubin, C. E..
2008.
« Detailed modelling of the lumbar spine for trauma applications: preliminary results ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 11, nº suppl. 1.
pp. 93-94. Ernst, R.E., Harris, B.A., Studd, D., Samson, C., Grosfils, E.B. et Head, J.W.. 2008. « The global distribution of graben-fissure systems on Venus and implications for intraplate magmatism on Mars ». Communication lors de la conférence : 6th Canadian Space Exploration Workshop: Canadian Scientific Priorities for the Global Exploration Strategy (Montreal, QC, Canada, Dec. 01-03, 2008).
Esmailzadeh, M., Lakis, A. A., Thomas, Marc et Marcouiller, L..
2008.
« Three-dimensional modeling of curved structures containing and/or submerged in fluid ».
Finite Elements in Analysis and Design, vol. 44, nº 6-7.
pp. 334-345.
Essid, Chaker, Salah, M. Bassem Ben, Faleh, Yassine, Samet, Abdelaziz et Kouki, Ammar B..
2008.
« An efficient space domain formulation of the MOM method for planar circuits ».
In Progress in Electromagnetic Research Symposium (PIERS) (Cambridge, MA, USA, Jul. 2-6, 2008)
pp. 722-724.
Cambridge, USA : The Electromagnetics Academy. Faccinetto, A., Lemaire, R., Ziskind, M., Therssen, E., Desgroux, P. et Focsa, C.. 2008. « Analysis of chemicals adsorbed on soot surface particles sampled in turbulent jet flames of liquid fuels ». Affiche présentée lors de la conférence : 32nd International Symposium on Combustion (Montreal, QC, Canada, Aug. 03-08, 2008).
Faleh, Y., Khebir, A., Kouki, Ammar B. et Samet, A..
2008.
« An efficient algorithm based on T-W 3-D formulation to reconstruct the conductivity from eddy currents data ».
In IEEE Conference on Electromagnetic Field Computation (CEFC) (Athens, Greece, May 11-15, 2008)
pp. 1165-1168.
Piscataway, NJ, USA : IEEE Magnetics Society.
Faleh, Yassine, Essid, Chaker, Khebir, Ahmed, Kouki, Ammar B. et Samet, Abdelaziz.
2008.
« Numerical reconstruction of permeability material using 3-D T- Ω formulation of finite element method ».
In Progress in Electromagnetic Research Symposium (PIERS) (Cambridge, MA, USA, Jul. 2-6, 2008)
pp. 456-460.
Cambridge, USA : The Electromagnetics Academy.
Faleh, Yassine, Essid, Chaker, Khebir, Ahmed, Kouki, Ammar B. et Samet, Abdelaziz.
2008.
« Numerical reconstruction of permeability material using 3-D T- Ω formulation of finite element method ».
PIERS Online, vol. 4, nº 6.
pp. 661-665.
Farrahi Moghaddam, Reza et Cheriet, Mohamed.
2008.
« EFDM : restoration of single-sided low-quality document images ».
In Proceedings : eleventh International Conference on Frontiers in Handwriting Recognition (Montreal, QC, Canada, Aug. 19-21, 2008)
Montréal : CENPARMI, Concordia University.
Favre, J., Luthi, F., Jolles, B., Aissaoui, Rachid, Siegrist, O. et Kamiar, A..
2008.
« Functional calibration for 3D knee joint angle description based on inertial sensors ».
In 10th International Symposium on 3D Analysis of Human Movement (3DMS) (Amsterdam, Netherlands, Oct. 28-31, 2008)
International Society of Biomechanics.
Favre, Julien, Jolles, B. M., Aissaoui, Rachid et Aminian, K..
2008.
« Ambulatory measurement of 3D knee joint angle ».
Journal of Biomechanics, vol. 41, nº 5.
pp. 1029-1035.
Fechine, G. J. M. et Demarquette, N. R..
2008.
« Cracking formation on the surface of extruded photodegraded polypropylene plates ».
Polymer Engineering and Science, vol. 48, nº 2.
pp. 365-372.
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2008.
« Modeling and simulation of conical bending with cylindrical rolls ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 545-550.
New York, NY, USA : American Society of Mechanical Engineers.
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2008.
« Simulation analyses of a non-kinematical conical roll bending process with conical rolls ».
In 20th European Modeling and Simulation Symposium (EMSS) (Amantea, Italy, Sept. 17-19, 2008)
pp. 146-153.
Italy : Diptim-Univ Genoa.
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2008.
« Simulation of a three-stage process for forming a closed cone from a plate ».
In ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, Jul. 27-31, 2008)
pp. 947-953.
New York, NY, USA : American Society of Mechanical Engineers.
Feng, Zhengkun et Soulaïmani, Azzeddine.
2008.
« Nonlinear aeroelasticity modeling using a reduced order model based on proper orthogonal decomposition ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 3-10.
New York, NY, USA : American Society of Mechanical Engineers. Fernberg, Peter, Trichtchenko, Larisa, Boteler, David et Samson, Claire. 2008. « Frequency analysis of geoelectric currents and PSP variations along a pipeline in the Ottawa River Valley, Canada ». Affiche numéro S1.1_S12 présentée lors de la conférence : 19th International Workshop on Electromagnetic Induction in the Earth (Beijing, China, Oct. 23-29, 2008).
Fogno, B. et Tremblay, Christine.
2008.
« 10 Gb/s recirculating loop test bed for the study of advanced optical device and network technologies ».
In 10th Photonics North Conference (Montreal, QC, Canada, June 4-8, 2008)
Fognon, B. et Tremblay, Christine. 2008. « 10 Gb/s recirculating loop test bed for the study of advanced optical device and network technologies ». Communication lors de la conférence : Photonics North Conference (Montreal, QC, Canada, June 2-4, 2008).
Forgues, Daniel et Koskela, Lauri.
2008.
« The influence of procurement on performance of integrated design in construction ».
In Building abroad: Procurement of construction and reconstruction projects in the international context, Conference workshop, 25–28 October 2008 (Montreal, Canada, Oct. 23-25, 2008)
pp. 245-256.
Montréal : Groupe de Recherche IF, GRIF, Université de Montréal.
Forgues, Daniel, Koskela, Lauri et Lejeune, Albert.
2008.
« Breaking socio-cognitive barriers to value generation in integrated teams ».
In Proceedings of IGLC16 : 16th Annual Conference of the International Group for Lean Construction (Manchester, UK, Jul. 16-18, 2008)
pp. 435-446.
Saltford : University of Salford, School of the Built Environment.
Forouzanfar, Mohamad, Moghaddam, Hamid Abrishami et Ghadimi, Sona.
2008.
« Locally adaptive multiscale bayesian method for image denoising based on bivariate normal inverse gaussian distributions ».
International Journal of Wavelets, Multiresolution and Information Processing, vol. 06, nº 04.
pp. 653-664.
Fortin Blanchette, Handy et Al-Haddad, Kamal.
2008.
« An efficient approach to design discrete packaging of bidirectional resonant power switch for matrix converter applications ».
IEEE Transactions on Power Electronics, vol. 23, nº 4.
pp. 2195-2200.
Foucault, G., Cuilliere, J. C., François, V., Leon, J. C. et Maranzana, R..
2008.
« An extension of the advancing front method to composite geometry ».
In Proceedings of the 16th International Meshing Roundtable, IMR 2007 (Seattle, WA, USA, Oct. 14-17, 2007)
pp. 287-314.
Springer Publishing Company.
Foucault, Gilles, Cuillière, Jean-Christophe, François, Vincent, Léon, Jean-Claude et Maranzana, Roland.
2008.
« Adaptation of CAD model topology for finite element analysis ».
Computer-Aided Design, vol. 40, nº 2.
pp. 176-196. Fraser, M., Surette, C. et Vaillancourt, C.. 2008. « Heavy metal concentrations in mussels from the Baie des Chaleurs, New Brunswick ». Affiche présentée lors de la conférence : 40th Annual Symposium Society of Toxicology of Canada (Montreal, QC, Canada, Dec. 01-02, 2008).
Freitas, Cinthia O. A., Oliveira, Luiz S., Sabourin, Robert et Bortolozzi, Flàvio.
2008.
« Brazilian forensic letter database ».
In 11th International Conference on Frontiers in Handwriting Recognition (ICFHR) (Montreal, Canada, Aug. 19-21, 2008)
Fromageau, J., Lerouge, Sophie, Maurice, R. L., Soulez, G. et Cloutier, G..
2008.
« Noninvasive vascular ultrasound elastography applied to the characterization of experimental aneurysms and follow-up after endovascular repair ».
Physics in Medicine and Biology, vol. 53, nº 22.
pp. 6475-6490. Fuentes, A., de Guise, J. A., Hagemeister, N., Ranger, P. et Heron, T.. 2008. « Augmentation du moment adducteur suite à une rupture du LCA : indices sur le développement de l'arthrose ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008).
Fuhrman, Christopher.
2008.
« Analysis of massive backscatter of email spam ».
In PTITS'2008 : 2nd Workshop on Practice and Theory of IT Security (Montreal, QC, Canada, Jan. 23, 2008)
Fuhrman, Christopher.
2008.
« Forensic value of backscatter from email spam ».
In 3rd International Annual Workshop on Digital Forensics and Incident Analysis (WDFIA) (Malaga, Spain, Oct. 9, 2008)
pp. 46-52.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Gabrea, Gheorghe Marcel.
2008.
« Robust detection of filled pauses in spontaneous conversational speech ».
Transactions on Electronics and Communications, vol. 53, nº 2.
pp. 21-24.
Gabrea, Gheorghe Marcel.
2008.
« Two microphones speech enhancement system based on instrumental variable algorithms ».
Transactions on Electronics and Communications, vol. 53, nº 2.
pp. 25-28.
Gagné, F., André, C., Cejka, P., Hausler, R., Fournier, M. et Blaise, C..
2008.
« Immunotoxic effects on freshwater mussels of a primary-treated wastewater before and after ozonation: a pilot plant study ».
Ecotoxicology and Environmental Safety, vol. 69, nº 3.
pp. 366-373.
Gagnon, Christian, Lajeunesse, André, Cejka, Patrick, Gagne, François et Hausler, Robert.
2008.
« Degradation of selected acidic and neutral pharmaceutical products in a primary-treated wastewater by disinfection processes ».
Ozone: Science and Engineering, vol. 30, nº 5.
pp. 387-392.
Gagnon, Ghyslain.
2008.
« Application note : real-time data transfer from FPGA board to MATLAB through PCI ».
Kingston, Canada : Canadian Microelectronics Corporation (CMC).
Gagnon, Ghyslain et MacEachern, L..
2008.
« Digital compensation of DAC mismatches in multibit delta-sigma ADCs ».
Electronics Letters, vol. 44, nº 12.
pp. 721-722.
Garcia-Fernandez, Angel F., Grajal, Jesus et Yeste-Ojeda, Omar A..
2008.
« Analysis of ISAR images of a helicopter by a facet model ».
In 2008 International Conference on Radar (Adelaide, Australia, Sept. 2-5, 2008)
pp. 32-37.
IEEE. Gargouri, I. et de Guise, J. A.. 2008. « Méthode automatique pour l'analyse morphométrique 3D du fémur ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008).
Gaudreau, M.-A., Laville, Frédéric, Voix, Jérémie et Nélisse, Hugues.
2008.
« État de l'art et perspectives sur la mesure des performances effectives des protecteurs auditifs en milieu de travail ».
Revue Internationale sur l'Ingénierie des Risques Industriels, vol. 1, nº 1.
pp. 65-85.
Gaudreau, Marc-André, Laville, Frédéric, Nelisse, Hugues et Voix, Jérémie.
2008.
« Méthode de mesures terrain de l'atténuation F-MIRE de protecteurs auditifs durant un quart de travail ».
Canadian Acoustics = Acoustique Canadienne, vol. 36, nº 2.
pp. 3-10. Gaudreault, N., De Guise, Jacques A. et Hagemeister, Nicola. 2008. « Towards the integration of 3D biomechanical measures in the development of a new clinical guideline ofr knee osteoarthritis patients. ». Affiche présentée lors de la conférence : 5th Guideline International Network Conference (GIN) (Helsinki, Finland, Oct. 1-3, 2008).
Gauthier, Guy et Boulet, Benoit.
2008.
« Robust design of terminal ILC with H-infinity mixed sensitivity approach for a thermoforming oven ».
Journal of Control Science and Engineering, vol. 2008.
Gauvin, C., Dolez, Patricia, Lara, J., Nguyen, C.T., Guero, G. et Vu-Khanh, Toan.
2008.
« Glove resistance to hypodermic needle puncture - method development and gloves characterization ».
In 1st International Conference on Personal Protective Equipement (PPE) (Bruges, Belgium, May 21-23, 2008)
Gauvin, C, Dolez, Patricia, Harrabi, L, Boutin, J, Petit, Yvan, Vu-Khanh, Toan et Lara, J.
2008.
« Mise au point de méthodes pour mesurer l'adhérence des gants de protection - Étude préliminaire ».
Coll. « Études et Recherches », vol. R-559.
Montréal, Canada : IRSST. 91 p.
Gauvin, Chantal, Dolez, Patricia, Harrabi, Lofti, Boutin, Jérôme, Petit, Yvan, Vu-Khanh, Toan et Lara, Jaime.
2008.
« Mechanical and biomechanical approaches to measure protective glove adherence ».
In Proceedings of the Human Factors and Ergonomics Society (New York, NY, USA, Sept. 22-26, 2008)
pp. 2018-2022.
Santa Monica, CA, USA : Human Factors and Ergonomics Society.
Gemme, F., Verreman, Y., Dubourg, L. et Jahazi, M..
2008.
« Friction stir welding of 7075 aluminium alloy : finite element modelling of the dwell phase ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 77-86.
Canadian Institute of Mining Metallurgy & Petroleum.
Georges, T., Brailovski, Vladimir, Coutu, D. et Terriault, Patrick.
2008.
« Design diagram for linear SMA actuators integrated in a morphing wing structure ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 455-462.
Materials Park, OH : ASM International.
Germain, L., Gey, N., Humbert, M., Vo, P., Jahazi, M. et Bocher, Philippe.
2008.
« Texture heterogeneities induced by subtransus processing of near alpha titanium alloys ».
Acta Materialia, vol. 56, nº 16.
pp. 4298-4308.
Gharbi, Ali, Pellerin, Robert et Sadr, Javad.
2008.
« Production rate control for stochastic remanufacturing systems ».
International Journal of Production Economics, vol. 112, nº 1.
pp. 37-47.
Gherboudj, I., Bernier, M. et Leconte, Robert.
2008.
« Understanding of the interaction of the radar response with the river ice cover ».
In IEEE International Geoscience and Remote Sensing Symposium (IGARSS) (Boston, MA, USA, Jul. 7-11, 2008)
pp. 526-529.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Gholipour, J. et Jahazi, M..
2008.
« Evaluation of lubricants in hydroforming of aerospace materials ».
In Plasticity 2008 (Kailua-Kona, HI, USA, Jan. 2-5, 2008)
Ghommam, Jawhar, Saad, Maarouf et Mnif, Faical.
2008.
« Formation path following control of unicycle-type mobile robots ».
In IEEE International Conference on Robotics and Automation (ICRA) (Pasadena, CA, USA, May 19-23, 2008)
pp. 1966-1972.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Giard, Pascal, Boland, Jean-François et Belzile, Jean. 2008. « CORBA based co-verification methodology for systemC ». Communication lors de la conférence : 8th North American SystemC User Group Meeting (NASCUG) (San Jose, CA, USA, Feb. 19-22, 2008).
Giard, Pascal, Boland, Jean-François et Belzile, Jean.
2008.
« CORBA communication backplane for design and verification ».
In 1st Microsystems and Nanoelectronics Research Conference (MNRC) (Ottawa, Canada, Oct. 15, 2008)
pp. 121-124.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Gillenwater, Daniel, Masson, Christian et Perron, Jean.
2008.
« Wind turbine performance during icing events ».
In 46th AIAA Aerospace Sciences Meeting and Exhibit (Reno, USA, Jan. 7-10, 2008)
Coll. « AIAA paper »
pp. 16407-16415.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Girard, S, Martel, A, Berger, J, Boukhtouta, A, Chouinard, Marc, Ghanmi, A et Guitouni, A.
2008.
« Canadian forces overseas supply network : strategic need and design methodology ».
Montreal : CIRRELT. 36 p. Girard-Lauriault, P.L., Truica-Marasescu, F., Ruiz, J.-C., Petit, A., Wang, H.T., Antoniou, J., Mwale, F., Lerouge, Sophie et Wertheimer, M.R.. 2008. « Nitrogen-rich plasma polymer coatings (PPE:N") for bio-medical applications in orthopedic and vascular therapies ». Communication lors de la conférence : International Conference on Metallurgical Coatings and Thin Films (ICMCTF) (San Diego, CA, USA, Apr. 28-May 2, 2008).
Girod, D., Landry, J. A., Doyon, G., Osuna-Garcìa, J.A., Salazar-Garcia, S. et Goenaga, R..
2008.
« Evaluating hass avocado maturity using hyperspectral imaging ».
In Proceedings of the 44th Anual Meeting Caribbean Food Crops Society : Repositioning Caribbean Agriculture : Challenges and Opportunities for Sustainability (Miami, FL, USA, July 13-17, 2008)
pp. 144-154.
Caribbean Food Crops Society. Gloaguen, E., Giroux, B. et Dubé, Jean-Sébastien. 2008. « Perspectives d'avenir pour l'hydrogéophysique ». Communication lors de la conférence : Colloque de l'Association d'Hydrogéophysique du Québec, 76e Congrès de l'ACFAS (Quebec, QC, Canada, Mai 2008). Goenaga, R., Salazar-Garcìa, S., Doyon, G., Osuna-Garcìa, J.A., Gonzalez-Duran, I.J.L. et Landry, Jacques-André. 2008. « Procinorte's tropical and subtropical fruits task force : a tri-national effort to improve fruit quality and trade. ». Affiche numéro 22 présentée lors de la conférence : 44th Annual Meeting of Caribbean Food Crops Society (Miami, FL, USA, July 13-17, 2008). Goutaland, D., Angulo-Jaramillo, R., Winiarski, T., Dubé, Jean-Sébastien, Delorme, C., Perrodin, Y. et Polacco, J.A.P.. 2008. « HYDRUS-3D flow model to investigate urban vadose zone hydrology ». Communication lors de la conférence : European Geosciences Union Gereral Assembly (Vienne, Austria, Apr. 13-18, 2008). Goutaland, D., Winiarski, T., Dubé, Jean-Sébastien et Chouteau, M.. 2008. « Caractérisation hydrogéophysique d'un dépôt fluvioglaciaire. Évaluation de l'effet de l'hétérogénéité hydrodynamique sur les écoulements en zone non-saturée ». Communication lors de la conférence : Colloque de l'Association d'Hydrogéophysique du Québec, 76e Congrès de l'ACFAS (Québec, QC, Canada, Mai 2008).
Goutaland, David, Winiarski, Thierry, Dubé, Jean-Sébastien, Bievre, Gregory, Buoncristiani, Jean-Francois, Chouteau, Michel et Giroux, Bernard.
2008.
« Hydrostratigraphic characterization of galciofluvial deposits underlying an infiltration basin using ground penetrating radar ».
Vadose Zone Journal, vol. 7, nº 1.
pp. 194-207.
Grami, Said et Bigras, Pascal.
2008.
« Identification of the GMS friction model based on a robust adaptive observer ».
International Journal of Modelling, Identification and Control, vol. 5, nº 4.
pp. 297-304.
Granger, Éric, Connolly, Jean-Francois et Sabourin, Robert.
2008.
« A comparison of fuzzy ARTMAP and Gaussian ARTMAP neural networks for incremental learning ».
In IEEE International Joint Conference on Neural Networks (IJCNN) (Hong Kong, China, June 1-8, 2008)
pp. 3305-3312.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Granger, Eric et Lefrançois, Germain.
2008.
« Novelty detection with probabilistic ARTMAP neural networks ».
In Smart Systems Engineering—Computational Intelligence in Architecting Engineering Systems (St-Louis, MO, USA, Nov. 9-12, 2008)
Coll. « Intelligent Engineering Systems through Artificial Neural Networks », vol. 18.
The American Society of Mechanical Engineers.
Grigorie, Lucian Teodor et Botez, Ruxandra.
2008.
« The bias temperature dependence estimation and compensation for an accelerometer by use of the neuro-fuzzy techniques ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 32, nº 3-4.
pp. 383-400.
Grigorie, T. et Botez, Ruxandra.
2008.
« Neuro fuzzy techniques for an accelerometer bias temperature dependence estimation and compensation ».
In International Conference on Avionics Systems (ICAS) (Hyderabad, India, Feb. 22-23, 2008)
Groleau, J., St-Jacques, Michèle et Assaf, Gabriel J..
2008.
« Étude sur la configuration des bandes rétroréfléchissantes utilisées sur les repères visuels ».
In 43e Congrès Annuel de l'Association Québécoise du Transport et des Routes (AQTR) (Québec, QC, Canada, 14-16 avril 2008)
Montréal, Canada : AQTR.
Grova, C., Daunizeau, J., Kobayashi, E., Bagshaw, A. P., Lina, Jean Marc, Dubeau, F. et Gotman, J..
2008.
« Concordance between distributed EEG source localization and simultaneous EEG-fMRI studies of epileptic spikes ».
Neurolmage , vol. 39, nº 2.
pp. 755-774.
Guilbault, Raynald et Thomas, Marc.
2008.
« Prediction of resonances of thin-rimmed cylindrical gears from a sub-structuring approach ».
In Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
CSME.
Gupta, V., Boulianne, G., Kenny, P. et Dumouchel, Pierre.
2008.
« Advertisement detection in french broadcast news using acoustic repetition and gaussian mixture models ».
In 9th Annual Conference of the International Speech Communication Association (INTERSPEECH) (Brisbane, Australia, Sept. 22-26, 2008)
pp. 2538-2541.
Bonn, Germany : International Speech Communication Association.
Gupta, V., Boulianne, G., Kenny, P., Ouellet, P. et Dumouchel, Pierre.
2008.
« Speaker diarization of french broadcast news ».
In IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) (Las Vegas, NV, USA, March 31-April 4, 2008)
pp. 4365-4368.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Gupta, Vishwa, Kenny, Patrick, Ouellet, Pierre, Boulianne, Gilles et Dumouchel, Pierre.
2008.
« Multiple feature combination to improve speaker diarization of telephone conversations ».
In IEEE Workshop on Automatic Speech Recognition and Understanding (ASRU) (Kyoto, Japan, Dec. 9-13, 2007)
pp. 705-710.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Habra, Naji, Abran, Alain, Lopez, Miguel et Sellami, Asma.
2008.
« A framework for the design and verification of software measurement methods ».
Journal of Systems and Software, vol. 81, nº 5.
pp. 633-648.
Habra, Naji, Alexandre, Simon, Desharnais, Jean-Marc, Laporte, Claude Y. et Renault, Alain.
2008.
« Initiating software process improvement in very small enterprises: experience with a light assessment tool ».
Information and Software Technology, vol. 50, nº 7-8.
pp. 763-771.
Hacini, Lyes, Lê, Van Ngan et Bocher, Philippe.
2008.
« Effect of impact energy on residual stresses induced by hammer peening of 304L plates ».
Journal of Materials Processing Technology, vol. 208, nº 1-3.
pp. 542-548.
Hagemeister, Nicola, Parent, Gerald, Husse, Sabine et de Guise, Jacques A..
2008.
« A simple and rapid method for electromagnetic field distortion correction when using two fastrak sensors for biomechanical studies ».
Journal of Biomechanics, vol. 41, nº 8.
pp. 1813-1817.
Haillot, D., Goetz, V., Py, X. et Benabdelkarim, M..
2008.
« Integrated solar collector storage system based on phase change materials and graphite composite ».
In 1st International Conference on Solar Heating, Cooling and Buildings (EUROSUN 2008) (Lisbon, Portugal, Oct. 7-10, 2008)
pp. 2122-2129.
Sociedade Portuguesa De Energia Solar (SPES).
Haillot, D., Pincemin, S., Py, X., Goetz, V. et Benabdelkarim, M..
2008.
« Conductive composites as solar absorber and heat storage media ».
In 14th biennial concentrating solar process symposium (SolarPACES 2008) (Las Vegas, NV, USA, Mar. 04-07, 2008)
Haillot, Didier, Py, Xavier, Goetz, Vincent et Benabdelkarim, Mohamed.
2008.
« Storage composites for the optimisation of solar water heating systems ».
Chemical Engineering Research and Design, vol. 86, nº 6.
pp. 612-617.
Haj Youssef, N. Bel et Al Haddad, Kamal.
2008.
« Sensorless nonlinear control of a three-phase/ switch/ level vienna rectifier based on a numerical reconstruction of DC and AC voltages ».
In IEEE Mediterranean Electrotechnical Conference (MELECON) (Ajaccio, France, May 5-7, 2008)
pp. 560-566.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre. 2008. « Operational level-based control policies in supply chain environment ». Communication lors de la conférence : 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, Mar. 31-Apr. 2, 2008).
Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre.
2008.
« Operational level-based control policies in supply chain environment ».
In 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, 31 mars-2avril 2008)
Hallé, Stéphane. 2008. « Modélisation de mouvements d'air engendrés par les systèmes de ventilation et leurs influences sur la qualité de l'air intérieur ». Communication lors de la conférence : Colloque Qualité de l'Air Intérieur : Besoin ou Luxe? (Montréal, QC, Canada, 5 fév. 2008). Hallé, Stéphane et Nadeau, Sylvie. 2008. « Vers l'intégration de connaissances en santé et en sécurité du travail en formation universitaire (génie mécanique): une collaboration unique ». Communication lors de la conférence : Séminaire de la communauté de pratique ValoRIST (Valorisation de la recherche de l'innovation sociale et de la technologie) (Montréal, QC, Canada, 22 fév. 2008).
Hallé, Stéphane, Nadeau, Sylvie et Rodier, Diane.
2008.
« L'intégration de connaissances en santé et sécurité du travail en formation universitaire : Le cas du génie mécanique au Québec ».
Hygiène et Sécurité du Travail , vol. 210.
pp. 59-63.
Hamadi, a, Rahmani, S., Santana, W. et Al Haddad, Kamal.
2008.
« A novel shunt hybrid power filter for the mitigation of power system harmonics ».
In IEEE Canada Electrical Power Conference (EPC) (Montreal, Canada, Oct. 25-26, 2007)
pp. 117-162.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hamdi, Abdelaziz, Kouki, Ammar B. et Samet, Abdelaziz.
2008.
« Modeling and design of a novel backward-wave scanning-beam antenna based on negative refractive index material structures ».
In 3rd International Conference on Systems and Networks Communications (ICSNC) (Sliema, Malta, Oct. 26-31, 2008)
pp. 33-37.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Hamel, J.P., Dessaint, Louis-A., Champagne, Roger et Paré, D..
2008.
« TCSC impedance regulator applied to the second benchmark model ».
In Proceedings of the CIGRÉ Canada Conference on Power Systems (Winnipeg, MB, Canada, Oct. 19-21, 2008)
Hamelin, Philippe, Bigras, Pascal, Beaudry, Julien, Lemieux, Sylvain et Blain, Michel.
2008.
« Hardware-in-the-loop simulation of an impedance controlled robot using a direct-drive test bench ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Cambridge, UK, June 30-July 2, 2008)
pp. 1281-1286.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hamelin, Philippe, Bigras, Pascal, Lemieux, Sylvain et Blain, Michel.
2008.
« Hardware-in-the-loop simulation of an impedance controlled robot interacting with a real environment ».
In Proceedings of the 10th IASTED International Conference on Control and Applications, CA 2008 (Quebec, Canada, May 26-28, 2008)
pp. 72-77.
Calgary, Canada : ACTA Press.
Hamimi, Amina N., Ruelland, François et Al Haddad, Kamal.
2008.
« Resonance effect of insulated negative current rail in a subway network ».
In 9th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (ELECTRIMACS) (Quebec, QC, Canada, June 8-11, 2008)
Hamouda, M., Fnaiech, F. et Al-Haddad, K..
2008.
« Modeling and adaptive control of two-stage matrix converters ».
International Review of Electrical Engineering, vol. 3, nº 1.
pp. 83-92.
Hamouda, Mahmoud, Fnaiech, Farhat et Al Haddad, Kamal.
2008.
« Analytical calculation of current and voltage stresses of Two-Stage Matrix Converter's power semiconductors ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 561-566.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Haouzia, Adil et Noumeir, Rita.
2008.
« Methods for image authentication: a survey ».
Multimedia Tools and Applications, vol. 39, nº 1.
pp. 1-46.
Harker, Matthew et O'Leary, Paul.
2008.
« Least squares surface reconstruction from measured gradient fields ».
In 26th IEEE Conference on Computer Vision and Pattern Recognition (CVPR) (Anchorage, AK, USA, June 23-28, 2008)
Institute of electrical and Electonics Engineers Inc..
Harker, Matthew, O'Leary, Paul et Zsombor-Murray, Paul.
2008.
« Direct type-specific conic fitting and eigenvalue bias correction ».
Image and Vision Computing, vol. 26, nº 3.
pp. 372-381.
Harrabi, Lofti, Dolez, Patricia, Vu-Khanh, Toan, Lara, Jaime, Tremblay, Guy, Nadeau, Sylvie et Larivière, Christian.
2008.
« Characterization of protective gloves stiffness: development of a multidirectional deformation test method ».
Safety Science, vol. 46, nº 7.
pp. 1025-1036.
Harrabi, Lotfi, Dolez, Patricia, Vu-Khanh, Toan et Lara, Jaime.
2008.
« Evaluation of the flexibility of protective gloves ».
International Journal of Occupational Safety and Ergonomics, vol. 14, nº 1.
pp. 61-68.
Harrison, J. W., Iles, P. J. W., Ferrie, F. P., Hefford, S., Kusevic, K., Samson, C. et Mrstik, P..
2008.
« Tessellation of ground-based LIDAR data for ICP registration ».
In Proceedings of the 5th Canadian Conference on Computer and Robot Vision (CRV) (Windsor, ON, Canada, May 28-30, 2008)
pp. 345-351.
IEEE. Harrison, J., Ferrie, F., Hefford, S.W., Samson, C., Kusevic, K., Mrstik, P. et Iles, P.J.W.. 2008. « Predicting the reliability of ICP registration ». Communication lors de la conférence : 10th Annual Scientific Conference of the GEOIDE Network (Niagara Falls, ON, Canada, May 28-30, 2008).
Hassine, Monem Bel, Grati, Khaled, Ghazel, Adel et Kouki, Ammar B..
2008.
« Design and implementation of AIS link layer using SDL-RT ».
In IEEE International Systems Conference Proceedings (Montreal, Canada, April 7-10, 2008)
pp. 126-130.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society. Hausler, Robert et Glaus, M.. 2008. « Serpentine : Un cyber transport au service de la mobilité urbaine ». Communication lors de la conférence : Festival des Sciences (Montréal, QC, Canada, 13-15 juin 2008).
Hausler, Robert, Hébert, N., Gagné, P., Cejka, P., Bouchard, B., Cyr, D.G., Blaise, C. et Fournier, M..
2008.
« Effects of ozone, ultraviolet and peracetic acid disinfection of a primary-treated municipal effluent on the immune system of rainbow trout (oncorhynchus mykiss) ».
Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology, vol. 148, nº 2.
pp. 122-127. Hefford, S., Samson, C., Iles, P., Harrison, J., Ferrie, F., Kusevic, K. et Mrstik, P.. 2008. « Integrating intensity information into an iterative closest point algorithm to georeference a mobile terrestrial Lidar system ». Communication lors de la conférence : 10th Annual Scientific Conference of the GEOIDE Network (Niagara Falls, ON, Canada, May 28-30, 2008). Hefford, S.W., Samson, C., Iles, P., Harrison, J., Ferrie, F., Kusevic, K. et Mrstik, P.. 2008. « Using images to georeference a mobile terrestrial LiDAR system ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Apr. 10-11, 2008).
Hejazi, Seyed Mahmood, Debbabi, Mourad et Talhi, Chamseddine.
2008.
« Automated windows memory file extraction for cyber forensics investigation ».
Journal of Digital Forensic Practice, vol. 2, nº 3.
pp. 117-131.
Hernandez, Leonardo Frois, Lima, Roberto Da Rocha, De Carvalho, Alexsander Tressino, Demarquette, Nicole R. et Da Silva, Maria Lúcia Pereira.
2008.
« Plasma polymerized acetaldehyde thin films for retention of volatile organic compounds ».
Química Nova, vol. 31, nº 6.
pp. 1410-1416.
Hida, H., Khaled, Amar et Nollet, Marie-José.
2008.
« Évaluation de la vulnérabilité sismique des ponts de la Ville de Québec ».
In Canadian Society for Civil Engineering - Annual Conference of the Canadian Society for Civil Engineering 2008 - "Partnership for Innovation" (Québec, QC, Canada, 10-13 juin 2008)
pp. 2369-2378.
Montreal, Canada : Canadian Society for Civil Engineering.
Hoang, Phuong Hoa et Ngô, Anh Dung.
2008.
« Behavior of laminated fiber composite T-joint under web pull-off static tensile loading using finite-element analysis ».
In 7th Joint Canada-Japan Workshop on Composites (Fujisawa, Kanagawa, Japan, July 28-31, 2008)
pp. 207-221.
Lancaster, PA , États-Unis : DEStech Publications Inc..
Hobeika, Christelle, Thibeault, Claude et Boland, Jean-François.
2008.
« Use of structural tests in RTL verification ».
In 1st Microsystems and Nanoelectronics Research Conference (MNRC) (Ottawa, Canada, Oct. 15, 2008)
pp. 133-136.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Hochart, Clement, Fortin, Guy, Perron, Jean et Ilinca, Adrian.
2008.
« Wind turbine performance under icing conditions ».
Wind Energy, vol. 11, nº 4.
pp. 319-333.
Humbert, Ludovic, de Guise, Jacques A., Godbou, B., Parent, S., Dubousset, J. et Skalli, W..
2008.
« Comparative study of scoliotic spines using a fast 3D reconstruction method from biplanar X-rays ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 11, nº suppl. 1.
pp. 117-118.
Iassinovski, Serguei, Artiba, Abdelhakim et Fagnart, Christophe.
2008.
« SD Builder® : a production rules-based tool for on-line simulation, decision making and discrete process control ».
Engineering Applications of Artificial Intelligence, vol. 21, nº 3.
pp. 406-418.
Ibrahim, H., Ilinca, A. et Perron, J..
2008.
« Energy storage systems-Characteristics and comparisons ».
Renewable and Sustainable Energy Reviews, vol. 12, nº 5.
pp. 1221-1250.
Idri, Ali, Zakrani, Abdelali et Abran, Alain.
2008.
« Functional equivalence between radial basis function neural networks and fuzzy analogy in software cost estimation ».
In 3rd International Conference on Information and Communication Technologies : From Theory to Applications (ICTTA) (Damascus, Syria, April 7-11, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society. Jaafar, E., Petit, Y., Clément, J., Lussier, B. et Hagemeister, N.. 2008. « Étude cinématique de la phase d’appui au trot chez le chien : validation d’un montage expérimental ». Affiche présentée lors de la conférence : VIIIème Journée de la Recherche de l’Hôpital du Sacré-Coeur (Montréal, QC, Canada, 2008). Jaafar, E., Petit, Y., Mark, L., Clément, J., Lussier, B. et Hagemeister, N.. 2008. « Kinematics study of the canine stance phase: validation of an experimental device ». Affiche présentée lors de la conférence : 28e Journée de la Recherche, Programme d'orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Jaafoura, K., Lemay, M., François, Véronique et Tremblay, Christine. 2008. « ROADM virtualization ». Communication lors de la conférence : SYTACom Research Workshop (Montreal, QC, Canada, May 2, 2008).
Jaber, M. B., Smaoui, H. et Terriault, Patrick.
2008.
« Finite element analysis of a shape memory alloy three-dimensional beam based on a finite strain description ».
Smart Materials and Structures, vol. 17, nº 4.
Janvier, Marie-Ange, Durand, Louis-Gilles, Cardinal, Marie-Hélène Roy, Renaud, Isabelle, Chayer, Boris, Bigras, Pascal, de Guise, Jacques A., Soulez, Gilles et Cloutier, Guy.
2008.
« Performance evaluation of a medical robotic 3D-ultrasound imaging system ».
Medical Image Analysis, vol. 12, nº 3.
pp. 275-290.
Jayaprakash, P., Singh, Bhim, Kothari, D. P., Chandra, Ambrish et Al Haddad, Kamal.
2008.
« Control of reduced rating dynamic voltage restorer with battery energy storage system ».
In Joint International Conference on Power System Technology and IEEE Power India Conference (POWERCON) (New Delhi, India, Oct. 12-15, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Jolicoeur, P., Grimault, S., Robitaille, N. et Lina, Jean-Marc.
2008.
« Electromagnetic explorations of the temporal dynamics of visual short-term memory ».
[Résumé d'une communication à une conférence]. International Journal of Psychology, vol. 43, nº 3-4.
p. 8.
Joncas, Simon et Belleau, Christian.
2008.
« The omer human-powered submarine team: from classroom to competition ».
In Oceans (Quebec, Canada, Sept. 15-18, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Jones, Emanuele, Le Moigne, Olivier et Robert, Jean-Marc (inventeurs) 19 août 2008. « IP Time to Live (TTL) field used as a covert channel ». Alcatel Lucent (titulaire(s)). Brevet américain US 7,415,018.
Joulin, A., Cheriff, Y., Zalewski, L., Lassue, S. et Rousse, Daniel.
2008.
« Turbulent forced convection in a horizontal channel involving rectangular obstacles ».
In Proceedings of CHT-08 ICHMT International Symposium on Advances in Computational Heat Transfer, May 11 - 16, 2008, Marrakesh, Morocco (Marrakesh, Morocco, May 11-16, 2008 )
Coll. « Begell digital library »
Redding, CT, USA : Begell House Inc.. Kaddoum, Georges. 2008. « Contributions à l’amélioration des systèmes de communication multi-utilisateur par chaos: synchronisation et analyse des performances ». Thèse de doctorat. Toulouse, Institut National des Sciences Appliquées de Toulouse, 136 p.
Kaddoum, Georges, Chargé, P., Roviras, D. et Fournier-Prunaret, D..
2008.
« Analytical BER expression of multi-user chaos-based DS-CDMA system using a piecewise linear chaotic map ».
In NOLTA 2008: International Symposium on Nonlinear Theory and Its Applications (Budapest, Hungary, Sept. 7-10, 2008)
pp. 640-643.
Japan : Institute of Electronics, Information and Communication Engineers.
Kaddoum, Georges, Chargé, Pascal, Roviras, Daniel et Fournier-Prunaret, Danièle.
2008.
« Chaos aided synchronization for asynchronous multi-user chaos-based DS-CDMA ».
In 15th IEEE International Conference on Electronics, Circuits and Systems (ICECS 2008) (Malta, Aug. 31-Sept. 3, 2008)
pp. 818-821.
Piscataway, NJ, USA : IEEE.
Kaddoum, Georges, Roviras, D., Chargé, P. et Fournier-Prunaret, D..
2008.
« Analytical calculation of BER in communication systems using a piecewise linear chaotic map ».
In 18th European Conference on Circuit Theory and Design 2007, ECCTD 2007 (Seville, Spain, Aug. 26-30, 2007)
pp. 691-694.
Piscataway, NJ, USA : IEEE.
Kaddoum, Georges, Roviras, D., Chargé, P. et Fournier-Prunaret, D..
2008.
« Code acquisition for asynchronous multi-user chaos-based DS-CDMA ».
In NOLTA 2008: International Symposium on Nonlinear Theory and Its Applications (Budapest, Hungary, Sept. 6-10, 2008)
pp. 476-479.
Japan : Institute of Electronics, Information and Communication Engineers.
Kahlaoui, Abdelilah, Abran, Alain et Lefebvre, Éric.
2008.
« DSML success factors and their assessment criteria ».
Metrics News, vol. 13, nº 1.
pp. 43-51.
Kalva, P. R., Enembreck, F. et Koerich L., A..
2008.
« WEB image classification using combination of classifiers ».
IEEE Latin America Transactions, vol. 6, nº 7.
pp. 661-671.
Kanaan, H. Y. et Al-Haddad, Kamal.
2008.
« Réduction du TDH d'un redresseur triphasé par réglage du courant injecté ».
Revue Internationale de Génie électrique, vol. 11, nº 1.
pp. 41-68.
Kanaan, H. Y., Mougharbel, I. et Al Haddad, Kamal.
2008.
« Average modeling and carrier-based control strategies applied to a three-phase four-leg shunt active power filter ».
International Review of Electrical Engineering, vol. 3, nº 5.
pp. 844-857.
Kanaan, H.Y., Georges, S., Mendalek, N., Hayek, A. et Al Haddad, Kamal.
2008.
« A linear decoupling control for a PWM three-phase four-wire shunt active power filter ».
In IEEE Mediterranean Electrotechnical Conference (MELECON) (Ajaccio, France, May 5-7, 2008)
pp. 610-618.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Kanaan, H.Y., Hayek, A. et Al Haddad, Kamal.
2008.
« Average modeling and carrier-based control strategies applied to a three-phase 4-leg active power filter ».
In 9th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (ELECTRIMACS) (Quebec, QC, Canada, June 8-11, 2008)
Kanaan, H.Y., Hayek, A. et Al Haddad, Kamal.
2008.
« Study, modeling and control of a single-phase power factor corrector based on the sheppard-taylor topology ».
In 9th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (ELECTRIMACS) (Quebec, QC, Canada, June 8-11, 2008)
Kanaan, Hadi Y. et Al Haddad, Kamal.
2008.
« Modeling techniques applied to switch-mode power converters : application to the boost-type single-phase full-bridge rectifier ».
In Conference on Human System Interaction (HSI) (Krakow, Poland, May 25-27, 2008)
pp. 979-983.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Kanaan, Hadi Y. et Al Haddad, Kamal.
2008.
« Small-signal averaged model and carrier-based linear control of a SEPIC-type power factor correction circuit ».
In IEEE 30th International Telecommunications Energy Conference (INTELEC) (San Diego, CA, USA, Sept. 14-18, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, Hadi Y., Hayek, Alfred et Al Haddad, Kamal.
2008.
« Multi-loops control design for a new sheppard-taylor based power factor corrector with model-nonlinearity compensation ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Cambridge, UK, June 30-July 2, 2008)
pp. 105-110.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, Hadi Y., Hayek, Alfred et Al Haddad, Kamal.
2008.
« Small-signal averaged model and carrier-based linear control of a new sheppard-taylor-based PFC ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 953-958.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Karbassi, A. et Nollet, Marie-José.
2008.
« Application of the applied element method to the seismic vulnerability evaluation of existing buildings ».
In Canadian Society for Civil Engineering - Annual Conference of the Canadian Society for Civil Engineering 2008 - "Partnership for Innovation" (Quebec, QC, Canada, June 10-13, 2008)
pp. 2339-2348.
Montreal, Canada : Canadian Society for Civil Engineering.
Karbassi, A. et Nollet, Marie-José.
2008.
« Development of an index assignment procedure compatible with the regional seismicity in the province of Quebec for the rapid visual screening of existing buildings ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 35, nº 9.
pp. 925-937.
Kasal, Gaurav Kumar, Singh, Bhim, Chandra, Ambrish et Al Haddad, Kamal.
2008.
« Voltage and frequency control with neutral current compensation in an isolated wind energy conversion system ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 2259-2264.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kassab, Mohamad, Ormadjieva, Olga, Daneva, Maya et Abran, Alain.
2008.
« Non-functional requirements size measurement Method (NFSM) with COSMIC-FFP ».
In Software Process and Product Measurement International Conference, IWSM-Mensura 2007, Palma de Mallorca, Spain, November 5-8, 2007.
Revised Papers (Palma de Mallorca, Spain, Nov. 5-8, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4895.
pp. 168-182.
Berlin, Germany : Springer-Verlag.
Kastlé, Mathieu, Lapalme, James et Aboulnhamid, El Mostapha.
2008.
« Dynamic proxy generation for a service-oriented architecture simulator ».
In 2008 Joint International IEEE Northeast Workshop on Circuits and Systems (NEWCAS) and TAISA Conference (NEWCAS-TAISA) (Montreal, QC, Canada, June 22-25, 2008)
pp. 225-228.
Piscataway, NJ, USA : IEEE.
Kedjar, Bachir et Al Haddad, Kamal.
2008.
« LQ control of a three-phase four-wire shunt active power filter based on three-level NPC inverter ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Niagara Falls, Canada, May 4-7, 2008)
pp. 1297-1302.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kenné, Jean Pierre et Nkeungoue, L. J..
2008.
« Simultaneous control of production, preventive and corrective maintenance rates of a failure-prone manufacturing system ».
Applied Numerical Mathematics, vol. 58, nº 2.
pp. 180-194. Kenné, Jean-Pierre, Gharbi, Ali et Beit, M.. 2008. « On the integrated production and preventive maintenance problem in manufacturing systems with backorder ». Communication lors de la conférence : 20th European Modeling and Simulation Symposium (EMSS) (Campora San Giovanni, Italy, Sept. 17-19, 2008).
Kenny, P., Ouellet, P., Dehak, N., Gupta, V. et Dumouchel, Pierre.
2008.
« A study of interspeaker variability in speaker verification ».
IEEE Transactions on Audio, Speech and Language Processing, vol. 16, nº 5.
pp. 980-988.
Kenny, Patrick, Dehak, Najim, Dehak, Réda, Gupta, Vishwa et Dumouchel, Pierre.
2008.
« The role of the speaker factors in the NIST extended data task ».
In Odyssey : the Speaker and Language Recognition Workshop (Stellenbosch, South Africa, Jan. 21-24, 2008)
Kenny, Patrick, Dehak, Najim, Ouellet, Pierre, Gupta, Vishwa et Dumouchel, Pierre.
2008.
« Development of the primary CRIM system for the NIST 2008 speaker recognition evaluation ».
In 9th Annual Conference of the International Speech Communication Association (INTERSPEECH) (Brisbane, Australia, Sept. 22-26, 2008)
pp. 1401-1404.
Bonn, Germany : International Speech Communication Association.
Kerboua, Y., Lakis, A. A., Thomas, Marc et Marcouiller, L..
2008.
« Computational modeling of coupled fluid-structure systems with applications ».
Structural Engineering and Mechanics, vol. 29, nº 1.
pp. 91-111.
Kerboua, Y., Lakis, A. A., Thomas, Marc et Marcouiller, L..
2008.
« Vibration analysis of rectangular plates coupled with fluid ».
Applied Mathematical Modelling, vol. 32, nº 12.
pp. 2570-86.
Khadkikar, V. et Chandra, Ambrish.
2008.
« A new control philosophy for a unified power quality conditioner (UPQC) to coordinate load-reactive power demand between shunt and series inverters ».
IEEE Transactions on Power Delivery, vol. 23, nº 4.
pp. 2522-2534.
Khadkikar, V. et Chandra, Ambrish.
2008.
« An independent control approach for three-phase four-wire shunt active filter based on three H-bridge topology under unbalanced load conditions ».
In IEEE Power Electronics Specialists Conference (PESC) (Rhodes, Greece, June 15-19, 2008)
pp. 4643-4649.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Khayati, K., Bigras, Pascal et Dessaint, Louis-A..
2008.
« Force control loop affected by bounded uncertainties and unbounded inputs for pneumatic actuator systems ».
Journal of Dynamic Systems, Measurement, and Control, vol. 130, nº 1.
011007-1 .
Kherraf, Samir, Lefebvre, Éric et Suryn, Witold.
2008.
« Transformation from CIM to PIM using patterns and archetypes ».
In 19th Australian Software Engineering Conference (ASWEC) (Perth, WA, Australia, March 26-28, 2008)
pp. 338-346.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Khettabi, R., Songmene, Victor, Masounave, Jacques et Zaghbani, Imed.
2008.
« Understanding the formation of nano and micro particles during metal cutting ».
International Journal of Systems Signal Control and Engineering Applications, vol. 1, nº 3.
pp. 203-210.
Khettabi, R., Zaghbani, Imed, Songmene, Victor et Masounave, Jacques.
2008.
« Identification et prédiction des fines poussières lors de l'usinage ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
Éd. 2007.
p. 56. Chicoutimi : Les Presses de l'aluminium PRAL.
Khettabi, Riad, Songmene, Victor et Masounave, Jacques.
2008.
« Influence des angles de coupe sur l'émission de poussières ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Khmelevskaya, I. Yu, Prokoshkin, S. D., Trubitsyna, I. B., Belousov, M. N., Dobatkin, S. V., Tatyanin, E. V., Korotitskiy, A. V., Brailovski, Vladimir, Stolyarov, V. V. et Prokofiev, E. A..
2008.
« Structure and properties of Ti-Ni-based alloys after equal-channel angular pressing and high-pressure torsion ».
Materials Science and Engineering: A, vol. 481-482.
pp. 119-122.
Khmelevskaya, I., Prokoshkin, S., Brailovski, Vladimir, Inaekyan, K., Demers, V., Gurtovaya, I., Korotitskiy, A. et Dobatkin, S..
2008.
« Functional properties of Ti-Ni-based shape memory alloys ».
In State-of-the-art Research and Application of SMAs Technologies (Acireale, Sicily, Italy, June 8-13, 2008)
Coll. « Advances in Science and Technology », vol. 59.
pp. 156-161.
Stafa-Zuerich, Suisse : Trans Tech Publications Ltd.
Kientzy, G., Zaghbani, Imed et Songmene, Victor.
2008.
« Usinabilité et aspects économiques de l'usinage à sec et de l'usinage lubrifié ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
Éd. 2007.
p. 54. Chicoutimi : Les Presses de l'aluminium PRAL.
Kincic, S., Papic, M. et Chandra, Ambrish.
2008.
« Dynamic, distribution vars in transmission system planning ».
In IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century (PES) (Pittsburgh, PA, USA, Jul. 20-24, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Kirk, A. G., Plant, D. V. et Menard, M..
2008.
« A comparison of beam deflection electro-optic switches ».
In International Conference on Photonics in Switching (PS) (Sapporo, Japan, Aug. 04-07, 2008)
Institute of electrical and Electonics Engineers Inc..
Ko, Albert Hung-Ren, Sabourin, Robert, De Soares Oliveira, Luiz E. et De Britto Jr, Alceu Souza.
2008.
« The implication of data diversity for a classifier-free ensemble selection in random subspaces ».
In 19th International Conference on Pattern Recognition (ICPR) (Tampa, FL, USA, Dec. 8-11, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Ko, Albert Hung-Ren, Sabourin, Robert et De Souza Britto Jr, Alceu S..
2008.
« A new HMM training and testing scheme ».
In 19th International Conference on Pattern Recognition (ICPR) (Tampa, FL, USA, Dec. 8-11, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Korotitskiy, Andrey V., Inaekyan, K. E., Brailovski, Vladimir et Prokoshkin, Sergey D..
2008.
« Long-term microhardness evolution in Ti-Ni shape memory alloys processed by severe cold rolling ».
In Nanomaterials by Severe Plastic Deformation IV (Goslar, Germany, Aug. 18-22, 2008)
Coll. « Materials Science Forum », vol. 584-586.
pp. 1039-1044.
Stafa-Zuerich, Switzerland : Trans Tech Publications Ltd. Kouki, Ammar B. (inventeur) 12 février 2008. « Adjustable electronic duplexer ». Socovar S.E.C. (titulaire(s)). Brevet américain US 7,330,500. Kouki, Ammar B. et Poitau, Gwenael (inventeurs) 2 décembre 2008. « Method and apparatus for amplifying a signal modulated in amplitude ». École de technologie supérieure (titulaire(s)). Brevet américain US 7,459,973.
Kouraogo, P. J., Gagnon, François et Dziong, Zbigniew.
2008.
« A per prediction based cross-layer MAC/PHY interface for CDMA ad hoc networks ».
In IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Cannes, France, Sept.15-18, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kouraogo, Pegdwindé Justin, Gagnon, François et Dziong, Zbigniew.
2008.
« A prediction based cross-layer MAC/PHY interface for CDMA ad hoc networks ».
In Ad-hoc, Mobile and Wireless Networks : 7th International Conference, ADHOC-NOW 2008 Sophia-Antipolis, France, September 10-12, 2008 proceedings (Sophia-Antipolis, France, Sept. 10-12, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5198.
pp. 293-306.
Berlin, Germany : Springer Verlag.
Kpodjedo, Segla, Ricca, Filippo, Galinier, Philippe et Antoniol, Giuliano.
2008.
« Error correcting graph matching application to software evolution ».
In 15th Working Conference on Reverse Engineering (WCRE) (Antwerp, Belgium, Oct. 15-18, 2008)
pp. 289-293.
IEEE.
Kpodjedo, Segla, Ricca, Filippo, Galinier, Philippe et Antoniol, Giuliano.
2008.
« Not all classes are created equal: Toward a recommendation system for focusing testing ».
In RSSE '08: Proceedings of the 2008 international workshop on Recommendation systems for software engineering (Atlanta, GA, USA, Nov. 09, 2008)
Coll. « Proceedings of the ACM SIGSOFT Symposium on the Foundations of Software Engineering »
pp. 6-10.
Association for Computing Machinery.
Kubicki, M., Styner, M., Bouix, S., Gerig, G., Markant, D., Smith, K., Kikinis, R., McCarley, R. W. et Shenton, M. E..
2008.
« Reduced interhemispheric connectivity in schizophrenia-tractography based segmentation of the corpus callosum ».
Schizophrenia Research, vol. 106, nº 2-3.
pp. 125-131.
Kuhlemann, Martin, Apel, Sven, Rosenmüller, Marko et Lopez-Herrejon, Roberto.
2008.
« A multiparadigm study of crosscutting modularity in design patterns ».
In Objects, Components, Models and Patterns : 46th International Conference, TOOLS EUROPE 2008, Zurich, Switzerland, June 30 - July 4, 2008. Proceedings (Zurich, Switzerland, June 30-July 04, 2008)
Coll. « Lecture Notes in Business Information Processing », vol. 11.
pp. 161-177.
Springer Verlag. Labbé, D. R., Baillargeon, D., de Guise, J. A., Fernandes, J. et Hagemeister, N.. 2008. « A new method for objectively attributing a grade to the pivot shift phenomenon of the knee ». Communication lors de la conférence : 10th World congress of the society for tennis medecine and science (Tokyo, Japan, Oct. 2008). Labbe, D., de Guise, Jacques A., Godbout, V., Fernandes, J. et Hagemeister, Nicola. 2008. « Development of an objective measurement tool for the pivot shift phenomenon of the knee ». Affiche présentée lors de la conférence : 16th Congress of the European Society of Biomechanics (ESB) (Lucerne, Switzerland, July 6-9, 2008). Labbe, D.R., De Guise, Jacques A., Fernandes, J., Godbout, V., Hagemeister, Nicola et Grimard, G.. 2008. « A method for classifying the grade of the pivot shift of the knee ». Affiche présentée lors de la conférence : SICOT/SIROT XXIV Triennial; World Congress (Hong Kong, China, Aug. 24-28, 2008).
Labbe, David R., de Guise, Jacques A., Godbout, Véronique, Fernandes, Julio et Hagemeister, Nicola.
2008.
« Development of an objective measurement tool for the pivot shift phenomenon of the knee ».
[Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 41, nº Suppl. 1.
S207.
Labbe, David R., Hagemeister, Nicola, Tremblay, Mathieu et de Guise, Jacques A..
2008.
« Reliability of a method for analyzing three-dimensional knee kinematics during gait ».
Gait and Posture, vol. 28, nº 1.
pp. 170-174. Labbé, David, Hagemeister, Nicola, de Guise, Jacques A., Fernandes, Julio et Ranger, Pierre. 2008. « A new method of objectivity grading the pivot shift phenomenon of the knee ». Affiche numéro 105 présentée lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard Samson (POES) (Montreal, QC, Canada, May 30, 2008).
Labib, M., Popov, A-V, Fays, J. et Botez, Ruxandra.
2008.
« Transition point displacement control on a wing equipped with actuators ».
In AIAA Guidance, Navigation, and Control Conference and Exhibit (Honolulu, USA, Aug. 18-21, 2008)
Coll. « AIAA paper »
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Lacasse, Louis, Tahan, Antoine et Liu, Zhaoheng.
2008.
« Robust method for the automatic characterization of a wooden board's geometrical state ».
Quality Engineering, vol. 20, nº 2.
pp. 221-231.
Lafi, S., Champagne, Roger, Kouki, Ammar B. et Belzile, Jean.
2008.
« Modeling radio-frequency front-ends using sysML: a case study of a UMTS transceiver ».
In Workshop Proceedings : ACESMB 2008 : First International Workshop on Model Based Architecting and Construction of Embedded Systems (Toulouse, France, Sept. 29, 2008)
pp. 115-118.
Lafortune, P., Terriault, Patrick, Brailovski, Vladimir et Torra, V..
2008.
« Superelasticity-related phenomena of shape memory alloy passive dampers ».
In SMST-2006 : Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Pacific Grove, CA, USA, May 7-11, 2006)
pp. 507-524.
Materials Park, OH : ASM International. Lagacé, P. Y., de Guise, Jacques A., Tétreault, P. et Hagemeister, Nicola. 2008. « Development and validation of a protocol for determining the displacement of the center of rotation of the humeral head with EOS ». Communication lors de la conférence : 10th International Symposium on 3D Analysis of Human Movement (3DMS) (Amsterdam, Netherlands, Oct. 28-31, 2008). Lagacé, P. Y., Hagemeister, N. et De Guise, J. A.. 2008. « Développement et validation d'un protocole pour déterminer le déplacement du centre de rotation de la tête humérale à l'aide d'EOS ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Lagacé, Pierre Jean, De Guise, Jacques A., Tétreault, Mario, Hagemeister, Nicola et Aissaoui, Rachid. 2008. « Development and validation of a protocol for determining the displacement of the centre of rotation of the humeral with EOS ». Communication lors de la conférence : 10th International Symposium on 3D Analysis of Human Movement (3DMS) (Amsterdam, Netherlands, Oct. 28-31, 2008).
Lagacé, Pierre Jean, Vuong, Mai-Hoa et Kamwa, I..
2008.
« Improving power flow convergence by Newton Raphson with a Levenberg Marquardt method ».
In IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century (PES) (Pittsburgh, PA, USA, Jul. 20-24, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Laghzale, Nor Eddine et Bouzid, Abdel-Hakim.
2008.
« An analytical solution of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behaviour ».
In Proceedings of the ASME Pressure Vessels and Piping Conference (Chicago, IL, USA, July 27-31, 2008)
pp. 63-72.
American Society of Mechanical Engineers.
Lalonde, Sébastien et Guilbault, Raynald.
2008.
« A new and efficient approach for boundary element 2D crack modeling ».
In Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
Lamarche, L., Dupré, G. et Kajl, S..
2008.
« A new design approach for ground source heat pumps based on hourly load simulations ».
Renewable Energy and Power Quality Journal, vol. 1, nº 6.
pp. 480-484.
Lamarre, Laurent et David, Éric.
2008.
« Temperature dependence of the resistance of modern epoxy mica insulation of HV rotating machines ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 15, nº 5.
pp. 1305-1312. Lamarre, M.-E., Parent, S., Labelle, H., Aubin, C.-E., Joncas, J. et Petit, Yvan. 2008. « Suspension is better than side-bending to assess spinal flexibility in Adolescent Idiopathic Scoliosis ». Communication lors de la conférence : 7th International Research Society of Spinal Deformities Meeting (IRSSD) (Liverpool, United Kingdom, July 9-12, 2008).
Landry, Jacques-André.
2008.
« Modélisation de la dynamique spatiotemporelle des mammifères marins dans l'estuaire ».
Portrait de Baleines, Le Bulletin de l'Estuaire: Observation, Recherche et Conservation, vol. 7, nº 14.
Landry, Jacques-André.
2008.
« Modélisation spatiale et temporelle du trafic maritime dans l'estuaire ».
Le bulletin de l'Estuaire: Observation, Recherche et Conservation, vol. 7, nº 15.
Landry, Jacques-André, Chion, C., Albuquerque Martins, C., Lamontagne, P., Turgeon, S., Parrott, L., Marceau, D., Michaud, R., Ménard, N., Lesage, V. et Giard, J.. 2008. « Modélisation des déplacements des bateaux d'excursions aux baleines et des mammifères marins dans le parc marin du Saguenay-Saint-Laurent ». Communication lors de la conférence : Colloque Scientifique du Parc Marin du Saguenay-Saint-Laurent (Rivière-du-Loup, QC, Canada, 2-3 oct. 2008). Landry, René Jr. 2008. « Tracking devices using GNSS, signals and MEMS sensors: a common goal toward - robust indoor positioning system ». Communication lors de la conférence : Health Management Task Group (AVT-160) - NATO Research and Technology Organisation, Munitions (Montreal, QC, Canada, Oct. 14-16, 2008).
Langar, Rami, Bouabdallah, Nizar et Boutaba, Raouf.
2008.
« A comprehensive analysis of mobility management in MPLS-based wireless access networks ».
IEEE/ACM Transactions on Networking, vol. 16, nº 4.
pp. 918-931.
Lapalme, James.
2008.
« Separating DSL semantics form implementation ».
In
MSDN Library.
Revised ed.
Microsoft.
Laporte, Catherine et Arbel, Tal.
2008.
« Combinatorial and probabilistic fusion of noisy correlation measurements for untracked freehand 3-D ultrasound ».
IEEE Transactions on Medical Imaging, vol. 27, nº 7.
pp. 984-994. Laporte, Claude Y.. 2008. « Le développement de normes internationales de génie logiciel pour les très petites entreprises ». Communication lors de la conférence : Journées de l’Aber Wrac’h, Séminaire Annuel du Laboratoire d’Informatique des Systèmes Complexes (Bretagne, France, 29-30 mai 2008).
Laporte, Claude Y., Alexandre, Simon et O'Connor, Rory V..
2008.
« Software engineering lifecycle standard for very small enterprises ».
In Software Process Improvement : 15th European Conference, EuroSPI 2008, Dublin, Ireland, September 3-5, 2008. Proceedings (Dublin, Irland, Sept. 3-5, 2008)
Coll. « Communications in Computer and Information Science », vol. 16.
pp. 129-141.
Berlin, Germany : Springer-Verlag.
Laporte, Claude Y., Alexandre, Simon et Renault, Alain.
2008.
« Developing international standards for very small enterprises ».
Computer, vol. 41, nº 3.
pp. 98-101.
Laporte, Claude Y., Renault, Alain et Alexandre, Simon.
2008.
« The application of international software engineering standards in very small enterprises ».
In
Software process improvement for small and medium enterprises : techniques and case studies.
pp. 42-70. Hershey PA, USA : Information Science Reference.
Laporte, Claude Y., Renault, Alain, Alexandre, Simon et Crowder, Kenneth V..
2008.
« The development of international standards for very small enterprises ».
In INCOSE International Symposium (Amsterdam, Netherlands, June 15-19, 2008)
pp. 620-631.
INCOSE.
Laporte, Claude Y., Roy, Denis et Novieli, Rosalia.
2008.
« La gestion des risques d'un projet de développement et d'implantation d'un système informatisé au Ministère de la Justice du Québec ».
Génie Logiciel, nº 84.
pp. 2-12.
Lateb, M., Masson, Christian, Bédard, Claude et Stathopoulos, T..
2008.
« Numerical simulation of wind-induced dispersion from a roof stack in the wake of another building ».
In Proceedings of 4th International Conference on Advances in Wind and Structures (AWAS'08) (Jeju, South Korea, May 29-31, 2008)
Laurent, F., Jacobs, J., Gotman, J. et Lina, Jean-Marc. 2008. « Predicting epilectic seizures from intracranial EEG : when improbable events become more probable ». Communication lors de la conférence : 62nd Annuel Meeting of American Epilepsy Society (Seattle, WA, USA, Dec. 5-9, 2008).
Lavigne, Martin, Rama, Rkbs, Ganapathi, Muthu, Nuño, Natalia, Winzenrieth, Renaud et Vendittoli, Pascal- André.
2008.
« Factors affecting acetabular bone loss during primary hip arthroplasty - A quantitative analysis using computer simulation ».
Clinical Biomechanics, vol. 23, nº 5.
pp. 577-583.
Lavoie, Frédéric, Laplante, Martin, Duval, Nicolas, Doré, Sylvie et de Guise, Jacques A..
2008.
« Gesture as an important factor in 3D kinematic assessment of the knee ».
Knee Surgery, Sports Traumatology, Arthroscopy, vol. 16, nº 1.
pp. 64-70.
Lavoie, P., Li, D. et Landry, René Jr.
2008.
« Inertial navigation system developed for MEMS applications ».
In 15th Saint-Petersburg International Conference on Navigation Systems (Saint-Petersburg, Russia, May 26-28, 2008)
pp. 269-275.
State Research Center of the Russian Federation.
Leblond, GF, Crevier-Denoix, N, Falala, S, Lerouge, Sophie et de Guise, Jacques A..
2008.
« Three-dimensional characterization of the fascicular architecture of the equine superficial digital flexor tendon ».
In 6th International Conference on Equine Locomotion (ICEL) (Cabourg, France, June 16-19, 2008)
Maisons-Alfort, France : ICEL6 Conference Secretariat.
Leconte, Robert, Temimi, Marouane, Chaouch, Naira, Brissette, François et Toussaint, Thibault.
2008.
« On the use of satellite passive microwave data for estimating surface soil wetness in the mackenzie river basin ».
In
Cold region atmospheric and hydrologic studies : the Mackenzie GEWEX experience.
pp. 59-79. Berlin, Heidelberg, Germany : Springer-Verlag.
Lederlin, Thomas, Sanjose, Marlene, Gicquel, Laurent, Cuenot, Benedicte, Pitsch, Heinz et Poinsot, Thierry.
2008.
« Large-eddy simulations of reacting liquid spray ».
In 61st Annual Meeting of the APS Division of Fluid Dynamics (San Antonio, TX, USA, Nov. 23-25, 2008)
American Physical Society. Lee, W., Bouzid, Hakim et Huang, J.. 2008. « Effect of HOBT test parameters on expanded PTFE gaskets ». Communication lors de la conférence : ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, July 27-31, 2008).
Lefebvre, Louis et Laville, Frédéric.
2008.
« Noise source identification for mechanical systems generating periodic impacts ».
Applied Acoustics, vol. 69, nº 9.
pp. 812-823.
Lefevre, F., Izquierdo, R. et Schougaard, S. B..
2008.
« A polymeric micro actuator to be integrated into an organic material based lab on chip microsystem ».
In Joint IEEE North-East Workshop on Circuits and Systems and TAISA Conference (NEWCAS-TAISA) (Montreal, QC, Canada, June 22-25, 2008)
pp. 318-321.
IEEE. Lejeune, Michel. 2008. « La certification des compétences de métiers au Québec : un regard sur les limites du référentiel de compétences et l’implication de l’évaluateur ». Communication lors de la conférence : 30e Session d'Étude de l'ADMEE (Trois-Rivières, QC, Canada, 23-24 oct. 2008).
Lejeune, Michel.
2008.
« Pertinence pour le Québec des instruments de reconnaissance des acquis de l’expérience en France, aux États-Unis et au Royaume-Uni ».
Montréal : Institut national de la recherche scientifique, Centre urbanisation culture société.
Lemaire, R., Therssen, E. et Desgroux, P..
2008.
« Determination of the ratios of soot refractive index functions E(m) for 266, 532 and 1064 nm wavelengths. Application to the detection of fluorescent species by coupling Laser Induced Incandescence / Fluorescence ».
In 3rd International Workshop and Meeting on Laser-Induced Incandescence. Quantitative interpretation, modelling, application. (Ottawa, ON, Canada, July 30-Aug. 01, 2008)
Lemieux, P-O, Nuño, Natalia, Tétreault, P. et Hagemeister, Nicola.
2008.
« Two dimensional numeric evaluation of a new prosthesis design adapted to the massive rotator cuff tear ».
In International Shoulder Group (ISG) (Bologna, Italy, July 10-12, 2008)
pp. 38-39.
Lemoine, Dominique, Cicek, Paul-Vahe, Nabki, Frederic et El-Gamal, Mourad N..
2008.
« MEMS wafer-level vacuum packaging with transverse interconnects for CMOS integration ».
In IEEE 2008 Custom Integrated Circuits Conference (CICC) (San Jose, CA, USA, Sept. 21-24, 2008)
pp. 189-192.
Institute of Electrical and Electronics Engineers Inc.. Lerouge, Sophie, Girard-Lauriault, P.L., Truica-Maresescu, F., Charbonneau, C. et Wertheimer, M.R.. 2008. « Nitrogen-rich plasma polymerized coatings for vascular implants ». Communication lors de la conférence : 8th World Biomaterial Congress (Amsterdam, Netherlands , May 28-June 1, 2008).
Lessard, S., Lau, C., Chav, R., Roy, D., Soulez, G. et de Guise, Jacques A..
2008.
« Motion detection in fluoroscopic image and its application to catheter marker tracking ».
In 31st Annual Conference of the Canadian Medical and Biological Engineering Society (Montreal, QC, Canada, June 11-13, 2008)
Lessard, S., Lau, C., Roy, D., Soulez, G. et de Guise, Jacques A..
2008.
« Wires segmentation in fluoroscopic images during cerebral aneurysm endovascular intervention ».
In 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro (ISBI) (Paris, France, May 14-17, 2008)
pp. 193-196.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Levasseur, A., Dupuis, K. et Petit, Yvan. 2008. « Influence de la microstructure sur les propriétés mécaniques de l'os vertébral évaluées par tomodensitométrie - Étude sur modèle synthéthique ». Communication lors de la conférence : 38e Réunion Annuelle de la Société de la Scoliose du Québec (Québec, QC, Canada, 6-8 nov. 2008).
Lévesque, D., Dubourg, L., Lord, M., Jahazi, M. et Blouin, A..
2008.
« Residual stress measurement in friction stir welds using laser ultrasonics ».
In Review of Progress in Quantitative Nondestructive Evaluation: Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation (Chicago, IL, USA, July 22-25, 2008)
Coll. « AIP Conference Proceedings », vol. 1096.
pp. 1719-1726.
AIP Publishing.
Lévesque, D., Dubourg, L., Mandache, C., Gougeon, P., Cao, X. et Jahazi, M. C..
2008.
« Assessment of friction stir welds with nondestructive methods ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 339-350.
Canadian Institute of Mining Metallurgy & Petroleum.
Lévesque, M., Hudon, C., Belec, M. et David, Éric.
2008.
« Evolution of slot partial discharges under electrical, thermal and mechanical stresses ».
In Conference Record of the 2008 IEEE International Symposium on Electrical Insulation (ISEI) (Vancouver, Canada, June 9-12, 2008)
pp. 153-157.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Li, Di, Landry, René Jr et Lavoie, Philippe.
2008.
« Low-cost MEMS sensor-based attitude determination system by integration of magnetometers and GPS: A real-data test and performance evaluation ».
In IEEE/ION Position, Location and Navigation Symposium (PLANS) (Monterey, CA, USA, May 5-8, 2008)
pp. 1190-1198.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Inc..
Li, Y., De Guise, J. A., Aissaoui, R., Duval, N., Hagemeister, N., Boivin, K., Turcot, K., Roy, A. et Pontbriand, R..
2008.
« 3D kinematic pattern classification of healthy knee joints and comparison with osteoarthritis joints ».
[Résumé d'une communication à une conférence]. Orthopaedic Proceedings, vol. 90-B, nº Suppl. I.
p. 130.
Lima, R. R., Hernandez, L. F., Fachini, E., Demarquette, N. R. et Silva, M. L. P..
2008.
« Comparison of adsorbent films obtained by plasma polymerization of oxygenated organic compounds ».
[Article de conférence]. Sensors and Actuators, B: Chemical, vol. 130, nº 1.
pp. 110-119.
Lina, Jean Marc, Dehaes, M., Matteau-Pelletier, C. et Lesage, F..
2008.
« Complex wavelets applied to diffuse optical spectroscopy for brain activity detection ».
Optics Express, vol. 16, nº 2.
pp. 1029-1050.
Liu, Xin-Jun et Bonev, Ilian A..
2008.
« Orientation capability, error analysis, and dimensional optimization of two articulated tool heads with parallel kinematics ».
Journal of Manufacturing Science and Engineering, vol. 130, nº 1.
011015-1 - 9.
Liu, Xinjun, Wu, Chao, Wang, Jinsong et Bonev, Ilian.
2008.
« Attitude description method of [PP]S type parallel robotic mechanisms ».
Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 44, nº 10.
pp. 19-23.
Lopez-Herrejon, Roberto E..
2008.
« Models, features and algebras: An exploratory study of model composition and software product lines ».
In Proceedings of the Third International Conference on Software and Data Technologies (Porto, Portugal, July 05-08, 2008)
pp. 293-296.
ScitePress.
Lopez-Herrejon, Roberto et Trujillo, Salvador.
2008.
« How complex is my product line? The case for variation point metrics ».
In 2nd International Workshop on Variability Modelling of Software-Intensive Systems (VaMoS'08) (Essen, Germany, Jan. 16-18, 2008)
pp. 97-100.
University Duisburg-Essen, Institute for Computer Science and Business Information Systems (ICB).
Loyka, Sergey et Gagnon, François.
2008.
« On outage and error rate analysis of the ordered V-BLAST ».
IEEE Transactions on Wireless Communications, vol. 7, nº 10.
pp. 3679-3685.
Mac-Thiong, J.M., Labelle, H., Charlebois, M., Huot, M. P. et de Guise, J. A..
2008.
« Sagittal plane alignment of spine and pelvis in adolescent idiopathic scoliosis ».
[Résumé d'une communication à une conférence]. Orthopaedic Proceedings, vol. 90-B, nº Suppl. I.
p. 36.
Mac-Thiong, Jean-Marc, Wang, Zhi, de Guise, Jacques A. et Labelle, Hubert.
2008.
« Postural model of sagittal spino-pelvic alignment and its relevance for lumbosacral developmental spondylolisthesis ».
Spine, vol. 33, nº 21.
pp. 2316-2325.
Mac-Thiong, Jean-Marc, Wang, Zhi, de Guise, Jacques A. et Labelle, Hubert.
2008.
« Sagittal spino-pelvic alignment in lumbosacral spondylolisthesis ».
In
Research into Spinal Deformities 6.
Coll. « Studies in Health Technology and Informatics », vol. 140.
p. 365. IOS Press.
Mah, J., Samson, C. et McKinnon, S..
2008.
« Mapping rock structures using a 3D laser imaging system developed for space operations ».
In 14th Astronautics Conference of the Canadian Aeronautics and Space Institute (ASTRO 2008) (Montreal, QC, Canada, Apr. 29-May 01, 2008)
Canadian Aeronautics and Space Institute. Mah, J., Samson, C. et McKinnon, S.. 2008. « The applicability of 3D laser imaging for rock mass characterization in an underground mine ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Apr. 10-11, 2008).
Mah, Jason, Samson, Claire, McKinnon, Steve et Aikman, Doug.
2008.
« Triangulation-based 3D laser imaging for underground rock mass characterization: Impact of operational parameters ».
In 42nd U.S. Rock Mechanics Symposium and 2nd U.S.-Canada Rock Mechanics Symposium (San Francisco, CA, USA, June 29-July 2, 2008)
pp. 427-435.
American Rock Mechanics Association.
Manar Abu Talib, M., Khelifi, Adel, Abran, Alain et Ormandjieva, Olga.
2008.
« Assessment of real-time software specifications quality using COSMIC-FFP ».
In Software Process and Product Measurement : International Conference, IWSM-Mensura 2007, Palma de Mallorca, Spain, November 5-8, 2007 : Revised Papers (Palma de Mallorca, Spain, Nov. 5-8, 2007)
Coll. « Lecture Notes in Computer Science », vol. 4895.
pp. 183-194.
Berlin, Heidelberg : Springer-Verlag.
Mandache, Catalin, Dubourg, Laurent, Merati, Ali et Jahazi, Mohammad.
2008.
« Pulsed eddy current testing of friction stir welds ».
Materials Evaluation, vol. 66, nº 4.
pp. 382-387.
Mandache, Lucian, Topan, Dumitru et Al Haddad, Kamal.
2008.
« Modeling of nonlinear ferromagnetic cores ».
Revue Roumaine des Sciences Techniques - Serie Électrotechnique et Énergétique, vol. 53, nº 4.
403 - 412.
Maneschi, Karen et Melhado, S.B..
2008.
« Escopo de projeto para produção de vedações verticais e revestimentos de fachada ».
In Anais do VIII Workshop Brasileiro Gestão do Processo de Projeto na Construção de Edifícios (São Carlos, Brasil, Nov. 03-04, 2008)
São Carlos : USP.
Maneschi, Karen et Melhado, Silvio.
2008.
« Scope of design for production of partition walls and facade coverings ».
In Design Management in the Architectural Engineering and Construction Sector. CIB W096 Architectural Management and CIB TG49 Architectural Engineering Conference (São Paulo, Brazil, Nov. 04-08, 2008)
pp. 267-274.
Rotterdam : CIB.
Manzione, Leonardo et Melhado, Silvio Burratino.
2008.
« Design review: a methodological tool for design management ».
In Design Management in the Architectural Engineering and Construction Sector. CIB W096 Architectural Management and CIB TG49 Architectural Engineering Conference (Säo Paulo, Brazil, Nov. 04-08, 2008)
pp. 275-284.
Rotterdam : CIB.
Maref, W..
2008.
« Fighting condensation inside walls ».
Home Builder Magazine, vol. 21, nº 5.
p. 34.
Maref, W., Ouazia, B., Reardon, J. et Rousseau, M..
2008.
« Ventilation and wall research house ».
In Thermal Performance of Exterior Envelopes of Whole Buildings X (Clearwater, FL, USA, Dec. 01-07, 2007)
ASHRAE.
Maref, W., Tariku, F. et Di Lenardo, B..
2008.
« L'IRC-CNRC élabore un protocole d'évaluation pour un pare-vapeur novateur ».
Innovation en Construction, vol. 13, nº 2.
p. 6.
Maref, W., Tariku, F. et Di Lenardo, B..
2008.
« NRC-IRC develops evaluation protocol for innovative vapour barrier ».
Construction Innovation, vol. 13, nº 2.
p. 6.
Marini, A. et Koerich L., Alessandro.
2008.
« Estratégias de rejeiçao para problemas multiclasses ».
In XXXIV Conferencia Latinoamericana de Informatica (CLEI 2008) (Santa Fé, Argentina, Sept. 8-12, 2008)
pp. 162-171.
Martens, Walter et Gagnon, François.
2008.
« Multipath propagation models for mobile line of sight conditions ».
In IEEE Antennas and Propagation Society International Symposium (San Diego, CA, USA, Jul. 5-11, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society. Martin, P., Trudeau, C. et April, Alain. 2008. « Impact de la délocalisation sur les ingénieurs Québécois: protectionisme ou laisser faire ». Communication lors de la conférence : Conférence en administration des affaires (Trois-Rivières, QC, Canada, 2008). Martins, C.C.A., Lamontagne, P., Parriott, L., Landry, Jacques-André, Marceau, D., Chion, C., Turgeon, S., Michaud, R., Menard, N., Dionne, S. et Cantin, G.. 2008. « Conceptualizing an individual-based model to simulate marine mammal behaviour in the Saint Lawrence estuary ». Communication lors de la conférence : Northwest Atlantic Fisheries Organization Symposium (NAFO) (Dartmouth, NS, Canada, Sept. 29-Oct. 1, 2008).
Martorell, F., Torra, V., Isalgue, A., Perea, M. Li, Terriault, Patrick et Lovey, F. C..
2008.
« Damping by SMA in civil engineering structures ».
In Emboding Intelligence in Structures and Integrated Systems (Acireale, Sicily, Italy, June 8-13, 2008)
Coll. « Advances in Science and Technology », vol. 56.
pp. 92-97.
Uetikon-Zuerich, Switzerland : Trans Tech Publications Ltd.
Mary, Caroline et Jahazi, Mohammad.
2008.
« Multi-scale analysis of IN-718 microstructure evolution during linear friction welding ».
Advanced Engineering Materials, vol. 10, nº 6.
pp. 573-578.
Masmoudi, Anis, Paquette, Gilbert et Champagne, Roger.
2008.
« Metadata-driven software components aggregation process with reuse ».
International Journal of Advanced Media and Communication, vol. 2, nº 1.
pp. 35-58.
Masson, Christian et Watters Sibuet, C.
2008.
« Moving actuator surfaces : a new concept for wind turbine aerodynamic analysis ».
In International Conference on Renewable Energy and Power Quality (ICREPQ) (Santander, Spain, March 12-14, 2008)
Matteau-Pelletier, C., Dehaes, M., Lesage, F. et Lina, Jean-Marc. 2008. « Wavelet-based estimation of long-memory noise in Diffuse Optical Imaging ». Communication lors de la conférence : IEEE 5th International Symposium on Biomedical Imaging : From Nano to Macro (ISBI) (Paris, France, May 14-17, 2008).
Matteau-Pelletier, C., Dehaes, M., Lesage, F. et Lina, Jean-Marc.
2008.
« Wavelet-based estimation of long-memory noise in diffuse optical imaging ».
In 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro (ISBI) (Paris, France, May 14-17, 2008)
pp. 400-403.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Mbou, E. et Songmene, Victor.
2008.
« Amélioration de la qualité et de la productivité de fraisage par le contrôle des conditions de coupe ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
Éd. 2007.
p. 55. Chicoutimi : Les Presses de l'aluminium, PRAL. McCausland, P.J.A., Samson, C. et Deslauriers, A.. 2008. « Preliminary bulk density of small meteorite fragments with visible light 3D laser imaging ». Communication lors de la conférence : 6th Canadian Space Exploration Workshop: Canadian Scientific Priorities for the Global Exploration Strategy (Montreal, QC, Canada, Dec. 01-03, 2008). McGuffin, Michael John. 2008. « Quelques visualisations ». Communication lors de la conférence : Arcadia (Montréal, QC, Canada, 8 nov. 2008). McGuffin, Michael John. 2008. « User interfaces for visualizing complex data ». Communication lors de la conférence : IBM Centers for Advanced Studies, 18th Annual International Conference on Computer Science and Software Engineering (CASCON) (Toronto, ON, Canada, Oct. 27-30, 2008).
Meghoufel, A, Crevier-Denoix, N, Cloutier, G et de Guise, Jacques A..
2008.
« Internal structure assessment of the equine superficial digital flexor tendons from In vivo ultrasound images ».
In 6th International Conference on Equine Locomotion (ICEL) (Cabourg, France, June 16-19, 2008)
Maisons-Alfort, France : ICEL6 Conference Secretariat.
Meghoufel, Ali, Cloutier, Guy, Crevier-Denoix, Nathalie et de Guise, Jacques A..
2008.
« A thinning algorithm for equine tendon structure identification from 2D ultrasound images ».
In 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro (ISBI) (Paris, France, May 14-17, 2008)
pp. 1565-1568.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Melhado, S. B..
2008.
« A passos curtos (Entrevista) ».
Construção Mercado (São Paulo).
pp. 48-52.
Melhado, S. B..
2008.
« Projetos coordenados (Entrevista) ».
Techne : Revista de Tecnologia da Construção, vol. 135.
pp. 40-45.
Melhado, S.B..
2008.
« Seminário para tornar empresas mais eficientes ».
Design Gráfico (São Paulo).
Melhado, Silvio.
2008.
« Projetos de edificações no Canadá ».
AECweb.
Ménard, M. et Kirk, A. G..
2008.
« Broadband integrated Fabry-Perot Electro-optic switch ».
In International Conference on Photonics in Switching (PS) (Sapporo, Japan, Aug. 04-07, 2008)
Institute of electrical and Electonics Engineers Inc..
Mendalek, N., Al Haddad, Kamal, Kanaan, H. Y. et Hassoun, G..
2008.
« Sliding mode control of three-phase four-leg shunt active power filter ».
In IEEE Power Electronics Specialists Conference (PESC) (Rhodes, Greece, June 15-19, 2008)
pp. 4362-4367.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Merabtine, A. et Benkoussas, B..
2008.
« Contrôle de la propagation des fumées des incendies dans un tunnel par extraction mécanique : Étude de la vitesse critique ».
In 8éme Congrès National de la Physique et ses Applications (Bejaia, Algérie, 11-13 nov. 2008)
Meunier, Gabriel, Gauthier, Guy et Boulet, Benoît.
2008.
« Control of the thermoforming reheat process using a combination of cycle-to-cycle and In-cycle control ».
In Proceedings of the 10th IASTED International Conference on Control and Applications, CA 2008 (Quebec, Canada, May 26-28, 2008)
pp. 205-211.
Calgary, Canada : ACTA Press.
Mezghani, N., Chav, R., Humbert, L., Parent, S., Skalli, W. et de Guise, J. A..
2008.
« A computer-based classifier of three-dimensional spinal scoliosis severity ».
International Journal of Computer Assisted Radiology and Surgery, vol. 3, nº 1-2.
pp. 55-60. Mezghani, N., Phan, P., Parent, S., Labelle, H. et de Guise, J. A.. 2008. « Augmentation de la précision de classification de colonnes scoliotiques chez l'adolescent selon la classification de Lenke à l'aide d'un arbre décisionnel ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008).
Mezghani, Neila, Boivin, Karine, Turcot, Katia, Aissaoui, Rachid, Hagemeister, Nicola et de Guise, Jacques A..
2008.
« Hierarchical analysis and classification of asymptomatic and knee osteoarthritis gait patterns using a wavelet representation of kinetic data and the nearest neighbor classifier ».
Journal of Mechanics in Medicine and Biology, vol. 8, nº 1.
pp. 45-54.
Mezghani, Neila, Husse, Sabine, Boivin, Karine, Turcot, Katia, Aissaoui, Rachid, Hagemeister, Nicola et de Guise, Jacques A..
2008.
« Automatic classification of asymptomatic and osteoarthritis knee gait patterns using kinematic data features and the nearest neighbor classifier ».
IEEE Transactions on Biomedical Engineering, vol. 55, nº 3.
pp. 1230-1232.
Mezghani, Neila, Mitiche, Amar et Cheriet, Mohamed.
2008.
« Bayes classification of online Arabic characters by Gibbs modeling of class conditional densities ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 30, nº 7.
pp. 1121-1131. Minville, M., Brissette, François et Leconte, Robert. 2008. « Uncertainty of climate change impacts and consequences on the prediction of future hydrological trends ». Communication lors de la conférence : CEATI water management 2008 workshop : Water Management, Climate Change Impacts on Hydroelectric Water Resources Management (Montreal, QC, Canada, Oct. 8-9, 2008).
Minville, M., Krau, S., Brissette, François et Leconte, Robert.
2008.
« Adaptation potential to climate change of the Péribonka river (Québec, Canada) water resource system ».
In Proceedings of the CEATI water management 2008 workshop : Water Management, Climate Change Impacts on Hydroelectric Water Resources Management (Montreal, QC, Canada, Oct. 8-9, 2008)
pp. 1-24.
CEATI International Inc.
Minville, Marie, Brissette, François et Leconte, Robert.
2008.
« Uncertainty of the impact of climate change on the hydrology of a nordic watershed ».
Journal of Hydrology, vol. 358, nº 1-2.
pp. 70-83.
Miranda, E. et Abran, A..
2008.
« Protecting software development projects against underestimation ».
Project Management Journal, vol. 39, nº 3.
pp. 75-85.
Miraoui, Moeiz, Tadj, Chakib et Ben Amar, Chokri.
2008.
« Architectural survey of context-aware systems in pervasive computing environment ».
Ubiquitous Computing and Communication Journal, vol. 3, nº 3.
pp. 1-9.
Miraoui, Moeiz, Tadj, Chakib et Ben Amar, Chokri.
2008.
« Context modeling and context-aware service adaptation for pervasive computing systems ».
International Journal of Computer and Information Science and Engineering , vol. 2, nº 3.
pp. 148-157. Moha, Naouel. 2008. « DECOR: Détection et correction des défauts dans les systèmes orientés objet ». Thèse de doctorat. Canada, Université de Montréal
Moha, Naouel, Guéhéneuc, Yann-Gäel, Le Meur, Anne-Françoise et Duchien, Laurence.
2008.
« A domain analysis to specify design defects and generate detection algorithms ».
In Fundamental Approaches to Software Engineering : 11th International Conference, FASE 2008, Held as Part of the Joint European Conferences on Theory and Practice of Software, ETAPS : Proceedings (Budapest, Hungary, March 29-April 6, 2008)
Coll. « Lecture Notes in Computer Science », vol. 4961.
pp. 276-291.
Springer.
Moha, Naouel, Rezgui, Jihene, Guéhéneuc, Yann-Gaël, Valtchev, Petko et El Boussaidi, Ghizlane.
2008.
« Using FCA to suggest refactorings to correct design defects ».
In Concept Lattices and Their Applications: Fourth International Conference, CLA 2006 Tunis, Tunisia, October 30-November 1, 2006 Selected Papers (Tunis, Tunisia, Oct. 30-Nov.1, 2006)
Coll. « Lecture Notes in Computer Science », vol. 4923.
pp. 269-275.
Berlin, Germany : Springer Berlin Heidelberg.
Moha, Naouel, Rouane Hacene, Amine Mohamed, Valtchev, Petko et Guéhéneuc, Yann-Gäel.
2008.
« Refactorings of design defects using relational concept analysis ».
In Formal Concept Analysis : 6th International Conference, ICFCA : Proceedings (Montreal, QC, Canada, Feb. 25-28, 2008)
Coll. « Lecture Notes in Computer Science », vol. 4933.
pp. 289-304.
Montreal, QC :
Mohamed, H., Masmoudi, R. et Chaallal, Omar.
2008.
« Compressive behaviour of filament winded GFRP tube-encased concrete columns ».
In 4th International Conference on FRP Composites in Civil Engineering (CICE) (Zurich, Switzerland, Jul. 22-24, 2008)
Switzerland : EMPA. Monajati, H., Jahazi, M., Bocher, Philippe et Yue, S.. 2008. « Dynamic recrystallization investigation during hot deformation of Udimet 720 nickel base superalloy ». Communication lors de la conférence : 14th International Metallurgy and Materials Congress (Istanbul, Turkey, Oct. 16-18, 2008). Monette, Frédéric. 2008. « Cinétiques réactionnelles de dégradation de la matière organique de lixiviats de lieux d'enfouissement sanitaires ». Communication lors de la conférence : 31e Symposium sur les Eaux Usées et 20e Atelier sur l'Eau Potable (Saint-Hyacinthe, QC, Canada, 28-29 oct. 2008).
Montminy, Steeve, Dupuis, Erick et Champliaud, Henri.
2008.
« Mechanical design of a hopper robot for planetary exploration using SMA as a unique source of power ».
Acta Astronautica, vol. 62, nº 6-7.
pp. 438-452.
Montoya Torres, Jairo Rafael.
2008.
« Un procedimiento greedy para el problema de posicionamiento de vehículos en sistemas complejos de transporte automatizado para manufactura ».
Ingenieria y Universidad, vol. 12, nº 1.
pp. 9-32.
Mora, Rodrigo, Bédard, Claude et Rivard, Hugues.
2008.
« A geometric modelling framework for conceptual structural design from early digital architectural models ».
Advanced Engineering Informatics, vol. 22, nº 2.
pp. 254-270. Moreau, A., Kruger, S.E., Côté, M. et Bocher, Philippe. 2008. « In-Situ monitoring of microstructure during thermomechanical simulations using laser-ultrasonics ». Communication lors de la conférence : 1st Interntional Symposium on Laser Ultrasonics : Science, Technology and Applications (Montreal, QC, Canada, July 16-18, 2008).
Moreau, André, Kruger, Silvio E., Côté, Marjolaine et Bocher, Philippe.
2008.
« In-Situ monitoring of microstructure during thermomechanical simulations using laser-ultrasonics ».
In 1st Interntional Symposium on Laser Ultrasonics : Science, Technology and Applications (Montreal, QC, Canada, July 16-18, 2008)
Morency, François, Hallé, Stéphane, Dufresne, Louis et Émond, C..
2008.
« Evaluation of diffusion models for airborne nanoparticles transport and dispersion ».
In Advances in Fluid Mechanics VII (New Forest, UK, May 21-23, 2008)
Coll. « WIT Transactions on Engineering Sciences », vol. 59.
pp. 111-120.
Southampton, UK : WIT Press.
Morin-Allory, Katell, Boulé, Marc, Borrione, Dominique et Zilic, Zeljko.
2008.
« Proving and disproving assertion rewrite rules with automated theorem provers ».
In IEEE International High Level Design Validation and Test Workshop (Incline Village, NV, USA, Nov. 19-21, 2008)
pp. 56-63.
IEEE.
Nabki, F., Ahmad, F., Allidina, K. et El-Gamal, M. N..
2008.
« A compact and programmable high-frequency oscillator based on a MEMS resonator ».
In IEEE 2008 Custom Integrated Circuits Conference (CICC) (San Jose, CA, USA, Sept. 21-24, 2008)
pp. 337-340.
Institute of Electrical and Electronics Engineers Inc..
Nabki, Frederic, Dusatko, Tomas A. et El-Gamal, Mourad.
2008.
« Microelectromechanical resonators for RF applications ».
In
Wireless technologies : circuits, systems, and devices.
pp. 589-628. CRC Press.
Nabki, Frederic, Dusatko, Tomas A. et El-Gamal, Mourad N..
2008.
« Frequency tunable silicon carbide resonators for MEMS above IC ».
In IEEE 2008 Custom Integrated Circuits Conference (CICC) (San Jose, CA, USA, Sept. 21-24, 2008)
pp. 185-188.
Institute of Electrical and Electronics Engineers Inc..
Nabki, Frederic, Dusatko, Tomas A., Vengallatore, Srikar et El-Gamal, Mourad N..
2008.
« Low-temperature (<300°C) low-stress silicon carbide surface micromachining fabrication technology ».
In Solid-state sensors, actuators, and microsystems workshop : technical digest (Hilton Head Island, SC, USA, June 1-5, 2008)
pp. 216-219.
San Diego, Calif. : Transducer Research Foundation.
Nabki, Frederic et El-Gamal, Mourad N..
2008.
« A high gain-bandwidth product transimpedance amplifier for MEMS-based oscillators ».
In 34th European Solid-State Circuits Conference (ESSCIRC 2008) (Edinburgh, Scotland, United kingdom, Sept. 15-19, 2008)
pp. 454-457.
IEEE.
Nabki, Frederic et El-Gamal, Mourad N..
2008.
« Modeling and simulation of micro electromechanical (MEM) beam resonator-based oscillators ».
In 2008 IEEE International Symposium on Circuits and Systems (ISCAS) (Seattle, WA, USA, May 18-21, 2008)
pp. 1324-1327.
Institute of Electrical and Electronics Engineers Inc..
Nadeau Beaulieu, M. et Botez, Ruxandra.
2008.
« Prediction of main rotor, tail rotor and engine parameters from flight tests ».
In 49th AIAA/ASME/ASCE/AHS/ASC Structures Structural Dynamics and Materials Conference (Schaumburg, IL, USA, April 7-10, 2008)
Coll. « AIAA paper »
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc.. Nadeau, Sylvie. 2008. « Gestion des risques: comment intégrer la gestion des risques de santé et de sécurité du travail aux risques opérationnels ». Communication lors de la conférence : MBA UQAT 2008, Lasarre (Lasarre, QC, Canada, 21 mai 2008). Nadeau, Sylvie. 2008. « Gestion des risques: comment intégrer la gestion des risques de santé et de sécurité du travail aux risques opérationnels ». Communication lors de la conférence : MBA UQAT 2008, Rouyn-Noranda (Rouyn-Noranda, QC, Canada, 17 nov. 2008).
Nadeau, Sylvie.
2008.
« Integrating occupational health and safety to operational risks management : a significant challenge and organizational culture ».
In 40th Annual Conference of the Nordic Ergonomics Society (NES) (Reykjavik, Iceland, Aug. 11-13, 2008)
Iceland : Icelandic Ergonomics Society.
Nadeau, Sylvie, Bouzid, Hakim et Prud’homme, David.
2008.
« Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ».
Revue Internationale sur l'Ingénierie des Risques Industriels, vol. 1, nº 1.
pp. 46-64.
Nadeau, Sylvie, Julien, B. et Arteau, Jean.
2008.
« When system reliability techniques are used to audit manufacturing suppliers in occupational health and safety ».
Buletinul Institutului Politehnic Din Iasi, vol. LIV (LVIII), nº fasc. 3-4.
pp. 55-61.
Nair, A., David, Éric et Godin, T..
2008.
« Experience with DC ramp test performed on asphalt-mica insulated hydraulic generators ».
In Conference Record of the 2008 IEEE International Symposium on Electrical Insulation (ISEI) (Vancouver, Canada, June 9-12, 2008)
pp. 166-169.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Nechache, Akli et Bouzid, Abdel-Hakim.
2008.
« On the use of plate theory to evaluate the load relaxation in bolted flanged joints subjected to creep ».
International Journal of Pressure Vessels and Piping, vol. 85, nº 7.
pp. 486-497.
Nechache, Akli et Bouzid, Abdel-Hakim.
2008.
« The effect of cylinder and hub creep on the load relaxation in bolted flanged joints ».
Journal of Pressure Vessel Technology, vol. 130, nº 3.
031211 (9 p.). Nelisse, Hugues, Gaudreau, Marc-André, Voix, Jérémie, Boutin, Jérôme et Laville, Frédéric. 2008. « Variability of hearing protection devices attenuation as a function of source location ». Communication lors de la conférence : Acoustics'08 (Paris, France, June 29-July 4, 2008).
Nerguizian, Vahé et Rafaf, Mustapha.
2008.
« Problems and projects based approach for analog electronic circuits' course ».
In WMSCI 2008 - The 12th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 14th International Conference on Information Systems Analysis and Synthesis, ISAS 2008 - Proceedings (Orlando, FL, USA, June 29-July 2, 2008)
pp. 152-156.
Paris, France : International Social Science Council (ISSC).
Ngô, Anh Dung et Ho, T.N..
2008.
« Composites effects of humidity and temperature on the tensile properties of hemp and coir fibers reinforcements ».
In 1st International Conference on Environment and Natural Resources (Ho Chi Minh, Viêt Nam, Mar. 17-18, 2008)
pp. 111-114.
Nguyen, H. N., Lê, Van Ngan, Champliaud, Henri et Martin, F..
2008.
« Waving behaviour of fatigue stress fluctuation in shrink-fit assemblies using 3D finite elements ».
In 4th International Conference on High Performance Structures and Materials (HPSM) (Algarve, Portugal, May 13-15, 2008)
pp. 459-469.
Southampton, UK : WITPress.
Nguyen-Tri, Phuong, Villoutreix, Gilbert et Bui, Chuong.
2008.
« Preparation of recycled polypropylene/organophilic modified layered silicates nanocomposites. Part I: the recycling process of polypropylene and the mechanical properties of recycled polypropylene/organoclay nanocomposites ».
Journal of Reinforced Plastics and Composites, vol. 27, nº 18.
pp. 1983-2000.
Nguyen-Tri, Phuong, Villoutreix, Gilbert et Bui, Chuong.
2008.
« Rôle du processus de traitement de surface sur les propriétés mécaniques du composites PP/fibres du bambou vietnamienne ».
In Oversea Vietnamese Chemistry and Chemical Technology Conference (Paris, France, Nov. 7-9, 2008)
Nguyen-Tri, Phuong, Villoutreix, Gilbert et Bui, Chuong.
2008.
« The polypropylene recycling process and the mechanical properties of recycled polypropylene/organophilic modified layered silicates nanocomposites ».
In Oversea Vietnamese Chemistry and Chemical Technology Conference (Paris, France, Nov. 7-9, 2008)
Nichols, Jackie, Ahmadi, Ali, Hoorfar, Mina, Najjaran, Homayoun et Holzman, Jonathan F..
2008.
« Micro-drop actuation using multiplexer structures ».
In ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels (Darmstadt, Germany, June 23-25, 2008)
pp. 1085-1092.
The American Society of Mechanical Engineers.
Nieto, Fabián Vargas et Montoya Torres, Jairo Rafael.
2008.
« Implementación de un procedimiento basado en algoritmos evolutivos para programar la producción de marquillas estampadas por transferencia térmica ».
Ingenieria y Universidad, vol. 12, nº 2.
pp. 269-299.
Nikiema, J., Dastous, P. A. et Heitz, M..
2008.
« Biofiltration of two alcohols: An experimental study ».
In CHISA 2008 - 18th International Congress of Chemical and Process Engineering (Prague, Czech Republic, Aug. 24-28, 2008)
Process Engineering Publisher.
Nikiema, J., Girard, M. et Heitz, M..
2008.
« Influence of the empty bed residence time on methane biofiltration ».
In Proceedings USC-UAM 2008 conference on biofiltration for air pollution control (Long Beach, CA, USA, Oct. 22-24, 2008)
Nikiema, J. et Heitz, M..
2008.
« Le biodiesel. I. Caractéristiques, atouts et limites — une synthèse ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 35, nº 1.
pp. 95-106.
Nikiema, J. et Heitz, M..
2008.
« Le biodiesel. II. Production — une synthèse ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 35, nº 1.
pp. 107-117.
Nóbrega Junior, Claudino Lins et Melhado, Silvio Burratino.
2008.
« Lean design management in architectural designs developed in the city of joão pessoa: Analysis with focus in the process of elaboration and description of the solution ».
In Design Management in the Architectural Engineering and Construction Sector. CIB W096 Architectural Management and CIB TG49 Architectural Engineering Conference (São Paulo, Brazil, Nov. 04-08, 2008)
pp. 343-350.
Rotterdam : CIB.
Nohile, Cédrick, Dolez, Patricia et Vu-Khanh, Toan.
2008.
« Parameters controlling the swelling of butyl rubber by solvents ».
Journal of Applied Polymer Science, vol. 110, nº 6.
pp. 3926-3933.
Norman, Richard, Lepercq, Etienne, Blaquière, Yves, Valorge, Olivier, Basile-Bellavance, Yan, Prytula, Richard et Savaria, Yvon.
2008.
« An interconnection network for a novel reconfigurable circuit board ».
In Joint IEEE North-East Workshop on Circuits and Systems and TAISA Conference (NEWCAS-TAISA) (Montreal, QC, Canada, June 22-25, 2008)
pp. 129-132.
IEEE.
Norman, Richard, Valorge, Olivier, Blaquière, Yves, Lepercq, Etienne, Basile-Bellavance, Yan, El-Alaoui, Youssef, Prytula, Richard et Savaria, Yvon.
2008.
« An active reconfigurable circuit board ».
In Joint IEEE North-East Workshop on Circuits and Systems and TAISA Conference (NEWCAS-TAISA) (Montreal, QC, Canada, June 22-25, 2008)
pp. 351-354.
IEEE.
Noumeir, Rita.
2008.
« Integrating the healthcare enterprise process ».
International Journal of Healthcare Technology and Management, vol. 9, nº 2.
pp. 167-180.
Nuño, Natalia, Madrala, A. et Plamondon, D..
2008.
« Measurement of transient and residual stresses during polymerization of bone cement for cemented hip implants ».
Journal of Biomechanics, vol. 41, nº 12.
pp. 2605-2611. O'Brian, D., Châtelain, B., Gagnon, François, Tremblay, Christine, Bernier, É. et Bélanger, M.. 2008. « Dual metaheuristic approach for solving the Min-RWA problem ». Communication lors de la conférence : Optical Fiber Communication Conference and National Fiber Optic Engineers Conference (OFC/NFOEC) (San Diego, CA, USA, Feb. 24-28, 2008 ).
O'Brien, Daniel, Châtelain, Benoît, Gagnon, François, Tremblay, Christine, Bélanger, Michel P. et Bernier, Éric.
2008.
« A dual metaheuristic solution to the min-RWA problem ».
In Optical Fiber Communication Conference/National Fiber Optic Engineers Conference (San Diego, CA, USA, Feb. 24-28, 2008)
Optical Society of America.
O'Leary, Paul et Harker, Matthew.
2008.
« An algebraic framework for discrete basis functions in computer vision ».
In 6th Indian Conference on Computer Vision, Graphics and Image Processing (ICVGIP) (Bhubaneswar, India, Dec. 16-19, 2008)
pp. 150-157.
Institute of electrical and Electonics Engineers Inc..
O'Leary, Paul, Harker, Matthew et Suesut, Taweepol.
2008.
« Combined polynomial and periodic moments for the analysis of measured 3D surfaces ».
In IEEE Instrumentation and Measurement Technology Conference (Victoria, BC, Canada, May 12-15, 2008)
pp. 354-358.
Institute of electrical and Electonics Engineers Inc..
Oliveira, C. F. P., Carastan, D. J., Demarquette, N. R. et Fechine, G. J. M..
2008.
« Photooxidative behavior of polystyrene–montmorillonite nanocomposites ».
Polymer Engineering and Science, vol. 48, nº 8.
pp. 1511-1517.
Oliveira, L. A. et Melhado, S. B..
2008.
« O projeto de fachadas leves: tecnologia e gestão ».
In Anais do VIII Workshop Brasileiro Gestão do Processo de Projeto na Construção de Edifícios (São Paulo, Brazil, Nov. 03-04, 2008)
São Carlos : USP.
Oliveira, Luciana Alves de, Maizia, Mindjid et Melhado, Sílvio Burrattino.
2008.
« Influence of the performance and buildability requirements on the building quality: comparison between the Brazilian and the French rennovation design process ».
In Design Management in the Architectural Engineering and Construction Sector. CIB W096 Architectural Management and CIB TG49 Architectural Engineering Conference (São Paulo, Brazil, Nov. 04-08, 2008)
pp. 181-190.
Rotterdam : CIB.
Oliveira, Luciana Alves, Maizia, Mindjid et Melhado, Silvio Burrattino.
2008.
« O desenvolvimento integrado de um projeto de renovação de fachadas: Estudo de um caso francês ».
Gestão & Tecnologia de Projetos, vol. 3, nº 1.
pp. 100-120.
Oliveira, Luciana Alves, Thomaz, Ercio et Melhado, Sílvio Burrattino.
2008.
« Retrofit de fachadas: tecnologias européias ».
Téchne : Revista de Tecnologia da Construção, vol. 16, nº 136.
pp. 56-59.
Oliveira, Luiz E. S., Cavalin, Paulo R., Britto Jr., Alceu S. et Koerich, Alessandro L..
2008.
« Inspeção automática de defeitos em madeiras de pinus usando visão computacional ».
Revista de Informática Teórica e Aplicada, vol. 15, nº 2.
pp. 203-217.
Oliveira, Luiz S., Justino, Edson, Sabourin, Robert et Bortolozzi, Flavio.
2008.
« Combining classifiers in the roc-space for off-line signature verification ».
Journal of Universal Computer Science, vol. 14, nº 2.
pp. 237-251.
Oliveira, Otávio José de et Melhado, Silvio Burratino.
2008.
« Proposta de um modelo de gestão para pequenas empresas de projeto de edifícios ».
Gestão & Tecnologia de Projetos, vol. 3, nº 2.
pp. 106-126.
Ormandjieva, O., Abu Talib, M. et Abran, Alain.
2008.
« Reliability model for component-based systems in cosmic (a case study) ».
International Journal of Software Engineering and Knowledge Engineering, vol. 18, nº 4.
pp. 515-539.
Ortega, Lina M., Le, Van Ngan, Blais, Jean François, Hausler, Robert et Droqui, Patrick.
2008.
« Effectiveness of soil washing, nanofiltration and electrochemical treatment for the recovery of metal ions coming from a contaminated soil ».
Water Research, vol. 42, nº 8-9.
pp. 1943-1952.
Ortega, Lina M., Lebrun, Rémi, Blais, Jean François et Hausler, Robert.
2008.
« Removal of metal ions from an acidic leachate solution by nanofiltration membranes ».
Desalination, vol. 227, nº 1-3.
pp. 204-216. Osuna-Garcia, J.A., Salazar-Garcia, S., Gonzalez-Duran, I.J.L., Doyon, G., Landry, Jacques-André et Geonaga, R.. 2008. « Evaluacion de la fluorescencia de la clorofila como alternativa para determinar la madurez legal en aguacate ». Communication lors de la conférence : Primer Congreso Nacional del Sistema Producto Aguacate (First National Congress on Avocado Production) (Mexico City, Mexico, Dec. 3-5, 2008). Osuna-Garcia, J.A., Salazar-Garcia, S., Gonzalez-Duran, I.J.L., Doyon, G., Landry, Jacques-André et Goenaga, R.. 2008. « Resultados preliminares sobre la técnica de fluorescencia de clorofila para determinar la madurez de cosecha en mango ». Communication lors de la conférence : XLIV Reunion Nacional de Investigacion Pecuaria y III Reunion Nacional de Innovacion Agricola y Forestal (Mexico City, Mexico, Nov. 3-8, 2008).
Ouhimmou, Mustapha, D'Amours, Sophie, Beauregard, Robert, Ait-Kadi, D. et Chauhan, S. S..
2008.
« Furniture supply chain tactical planning optimization using a time decomposition approach ».
European Journal of Operational Research, vol. 189, nº 3.
pp. 952-970.
Ounejjar, Youssef et Al Haddad, Kamal.
2008.
« A novel high energetic efficiency multilevel topology with reduced impact on supply network ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 489-494.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Pageau, L.-A., Nollet, Marie-José, LeBoeuf, D. et Khaled, A..
2008.
« La gestion incrémentale de la réhabilitation sismique des ponts et viaducs de la ville de Québec ».
In Canadian Society for Civil Engineering - Annual Conference of the Canadian Society for Civil Engineering 2008 - "Partnership for Innovation" (Québec, QC, Canada, June 10-13, 2008)
pp. 1425-1434.
Montréal, Canada : Société Canadienne de Génie Civil.
Pan, Z., Châtelain, B., Plant, D.V., Gagnon, François, Tremblay, Christine et Bernier, É..
2008.
« Tabu search optimization in translucent network regenerator allocation ».
In 5th Conference on Broadband Communications, Networks and Systems (BROADNETS) (London, UK, Sept. 8-11, 2008)
pp. 627-631.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Paquet, Marc, Martel, A. et Montreuil, B..
2008.
« A manufacturing network design model based on processor and worker capabilities ».
International Journal of Production Research, vol. 46, nº 7.
pp. 2009-2030.
Paradis, A., Terriault, Patrick, Brailovski, Vladimir et Torra, V..
2008.
« On the partial recovery of residual strain accumulated during an interrupted cyclic loading of NiTi shape memory alloys ».
Smart Materials and Structures, vol. 17, nº 6.
Paradis, Jean.
2008.
« Estimation ».
2e éd.
Laval, Québec : Beauchemin. 331 p. Parrott, L., Chion, C., Martins, C.C.A., Lamontagne, P., Turgeon, S., Landry, Jacques-André, Marceau, D., Micheau, R., Cantin, G., Menard, N. et Dione, S.. 2008. « Agent-based modelling of marine mammals and boat traffic in the Saint Lawrence Estuary ». Communication lors de la conférence : International Conference on Ecological Informatics 6 (ICEI) (Cancun, Mexico, Dec. 2-5, 2008).
Paternina-Arboleda, Carlos D., Montoya Torres, Jairo R. et Fabregas-Ariza, Aldo.
2008.
« Simulation-optimization using a reinforcement learning approach ».
In Winter Simulation Conference (Miami, FL, USA, Dec. 07-10, 2008)
pp. 1376-1383.
Institute of Electrical and Electronics Engineers Inc..
Paternina-Arboleda, Carlos D., Montoya-Torres, Jairo R., Acero-Dominguez, Milton J. et Herrera-Hernandez, Maria C..
2008.
« Scheduling jobs on a k-stage flexible flow-shop ».
Annals of Operations Research, vol. 164, nº 1.
pp. 29-40.
Pellecuer, Luc.
2008.
« L'art de tourner en rond ».
Le Soleil, nº 11 janvier.
p. 16.
Pellecuer, Luc.
2008.
« Les carrefours giratoires : petit tour de la question ».
Découvrir, vol. 29, nº 2.
p. 29.
Pellecuer, Luc, Roy, Jean-Philippe, St-Jacques, Michèle et Assaf, Gabriel J..
2008.
« Étude sur les différentes méthodes de relevés et d'indicateurs de performance sur la durabilité et la rétroréflexion dans le domaine du marquage longitudinal : rapport de recherche ».
Coll. « Rapport de recherche », vol. R618.1.
Québec : École de technologie supérieure; Transports Québec. 66 p.
Pellecuer, Luc et St-Jacques, Michèle.
2008.
« Dernières avancées sur les carrefours giratoires ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 35, nº 5.
pp. 542-553.
Pelletier, F., Masson, Christian et Tahan, Antoine.
2008.
« Power performance evaluation and improvement of operational wind power plant ».
In OSIsoft Wind Power User Group Meeting (Chicago, IL, USA, June 4, 2008)
Pérez, M.A., Desmarais-Trépanier, C., Nuño, Natalia, Vendittoli, P.A., Lavigne, M., Garcia-Aznar, J.M. et Doblaré, M..
2008.
« Bone remodelling models application to a resurfaced prosthesis ».
In Abstracts book : EORS 2008 : 17th Annual meeting of the European Orthopaedic Research Society (Madrid, Spain, April 24-26, 2008)
0-004.
European Orthopaedic Reseach Society.
Perraton, Daniel, Guissi, G., Pierre, P. et Doré, G..
2008.
« A new laboratory test for reflective cracking in mode I and/or II ».
In Pavement cracking mechanisms, modeling, detection, testing and case histories : proceedings of the 6th RILEM International Conference on Cracking in Pavements : Chicago, USA, 16-18 June 2008 (Chicago, IL, USA, June 16-18, 2008)
pp. 447-456.
Boca Raton : CRC Press. Petit, Yvan, Lamarre, M.-E., Labelle, H., Aubin, C.-E. et Parent, S.. 2008. « L'estimation des forces en jeux est nécessaire pour évaluer la flexibilité segmentaire de la colonne vertébrale scoliotique ». Communication lors de la conférence : 38e Réunion Annuelle de la Société de la Scoliose du Québec (Québec, QC, Canada, 6-8 nov. 2008).
Petrillo, Fabio, Pimenta, Marcelo, Trindade, Francisco et Dietrich, Carlos.
2008.
« Houston, we have a problem...: A survey of actual problems in computer games development ».
In Proceedings of the ACM Symposium on Applied Computing (Fortaleza, Brazil, Mar. 16-20, 2008)
pp. 707-711.
Association for Computing Machinery. Pham Van Bang, D. et Bertrand, F.. 2008. « Sedimentation-consolidation of Le Havre’s mud: space-time analysis from experimentation and numerical investigation ». Communication lors de la conférence : International Symposium on Sediment Management (I2SM) (Lille, France, 2008).
Pham Van Bang, Damien, Ouahsine, Abdellatif, Sergent, Philippe, Long, Bernard, Montreuil, Stéphane, Debaillon, Pierre et Hissel, François.
2008.
« Érosion des sédiments et vague générées par le passage des bateaux : mesures et analyses ».
In Xèmes Journées Nationales Génie Côtier – Génie Civil (Sophia Antipolis, France, 14-16 oct. 2008)
pp. 605-614.
Phan, P., Mezghani, N., Parent, S., Aubin, C. E., de Guise, J. A. et Labelle, H.. 2008. « Développement d'une plate-forme logicielle pour guider le traitement chirurgical de la scoliose idiopathique de l'adolescent ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Phan, P., Mezghani, N., Parent, S., Labelle, H. et de Guise, Jacques A.. 2008. « The use of a decision tree increases accuracy when classifying adolescent idiopathic scoliosis using Lenke classification ». Communication lors de la conférence : The International Research Society of Spinal Deformities (Liverpool, United Kingdom, July 9-12, 2008).
Piccand, Sébastien, Noumeir, Rita et Paquette, Eric.
2008.
« Region of interest and multiresolution for volume rendering ».
IEEE Transactions on Information Technology in Biomedicine, vol. 12, nº 5.
pp. 561-568. Pigeon, S. et Coulombe, Stéphane. 2008. « Very low cost algorithms for predicting the file size of JPEG images subject to changes of quality factor and scaling ». Affiche présentée lors de la conférence : Data Compression Conference (DCC) (Snowbird, UT, USA, March 25-27, 2008).
Pigeon, Steven et Coulombe, Stéphane.
2008.
« Computationally efficient algorithms for predicting the file size of JPEG images subject to changes of quality factor and scaling ».
In 24th Biennial Symposium on Communications (BSC) (Kingston, Canada, June 24-26, 2008)
pp. 378-382.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Ploeger, S. K., O'Connell, R., Atkinson, G. M. et Samson, C..
2008.
« Earthquake loss estimation data collection and preparation for urban disaster management: a case study from the City of Ottawa, Canada ».
In Comptes rendus: 4e conférence canadienne sur les géorisques : des causes à la gestion, 20 au 24 mai 2008, Université Laval Québec = Proceedings: 4th Canadian conference on geohazards : from causes to management, May 20-24th 2008 (Quebec, QC, Canada, May, 20-24, 2008)
Quebec : Presses de l'Université Laval. Ploeger, S.K., Atkinson, G.M., Samson, C. et O’Connell, R.. 2008. « Applying HAZUS-MH for earthquake loss estimations in downtown Ottawa, Canada ». Communication lors de la conférence : 80th Annual Meeting of the Eastern Section of the Seismological Society of America (Kingston, ON, Canada, Oct. 05-07, 2008). Ploeger, S.K., O’Connell, R., Atkinson, G.M. et Samson, C.. 2008. « Data collection and preparation for earthquake loss estimation in Ottawa, Canada ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Apr. 10-11, 2008).
Popov, A.V. et Botez, Ruxandra.
2008.
« Open loop control of the transition point position on a morphing wing ».
In The 32nd annual Congress of the American Romanian Academy of Arts and Sciences (ARA) : Wentworth Institute of Technology, Boston, MA, USA, July 22-26, 2008 : proceedings (Boston, MA, USA, July 22-26, 2008)
Montréal : Polytechnic International Press.
Popov, Andrei Vladimir, Botez, Ruxandra et Labib, Michel.
2008.
« Transition point detection from the surface pressure distribution for controller design ».
Journal of Aircraft, vol. 45, nº 1.
pp. 23-28.
Popov, Andrei Vladimir, Labib, Michel, Fays, Julien et Botez, Ruxandra Mihaela.
2008.
« Closed-loop control simulations on a morphing wing ».
Journal of Aircraft, vol. 45, nº 5.
pp. 1794-1803.
Prokoshkin, S. D., Brailovski, Vladimir, Inaekyan, K. E., Demers, V., Khmelevskaya, I. Yu, Dobatkin, S. V. et Tatyanin, E. V..
2008.
« Structure and properties of severely cold-rolled and annealed Ti-Ni shape memory alloys ».
[Article de conférence]. Materials Science and Engineering: A, vol. 481-482.
pp. 114-118.
Prokoshkin, S., Korotitskiy, A., Brailovski, Vladimir et Inaekyan, K.
2008.
« Effect of dislocation substructure and grain structure of B2-austenite on martensite lattice parameters and transformation lattice strain in binary Ti-Ni Alloys ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 63-70.
Materials Park, OH : ASM International.
Prokoshkin, S.D., Korotitskiy, A.V., Brailovski, Vladimir et Inaekyan, K.E..
2008.
« Effect of nanocrystalline structure and polygonized dislocaton substructure on Ti-Ni martensite lattice parameters and transformation latice strain ».
In Nanomaterials by Severe Plastic Deformation IV (Goslar, Germany, Aug. 18-22, 2008)
Coll. « Materials Science Forum », vol. 584-586.
pp. 475-480.
Stafa-Zuerich, Switzerland : Trans Tech Publications. Proulx, S. et Gauthier, P.. 2008. « Moving to long-term care facility. The fear of losing one’s personality ». Communication lors de la conférence : International Federation on Ageing 9th Global Conference on Ageing (Montreal, QC, Canada, Sept. 04-07, 2008). Proulx, Sébastien. 2008. « De la signalétique à l'intelligibilité du lieu : l'orientation spatiale comme expérience ». Mémoire de maîtrise. Montréal, Université de Montréal, 178 p.
Provencher, H., Noirhomme, B. et David, Éric.
2008.
« Influence of temperature and moisture on the dielectric response of oil-paper insulation system ».
In Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Quebec, Canada, Oct. 26-29, 2008)
pp. 125-128.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Radtke, P.V., Sabourin, Robert et Wong, Tony. 2008. « Using the RRT algorithm to optimize classification systems for handwritten digits and letters ». Communication lors de la conférence : ACM Symposium on Applied Computing (SAC) (Fortaleza, Ceara, Brazil, Mar. 16-20, 2008).
Radtke, Paulo V. W., Sabourin, Robert et Wong, Tony.
2008.
« Using the RRT algorithm to optimize classification systems for handwritten digits and letters ».
In 23rd Annual ACM Symposium on Applied Computing (SAC) (Fortaleza, Ceara, Brazil, March 16-20, 2008)
pp. 1748-1752.
New York, NY, USA : Association for Computing Machinery.
Rahmani, S., Al-Haddad, K. et Kanaan, H. Y..
2008.
« Two PWM techniques for single-phase shunt active power filters employing a direct current control strategy ».
IET Power Electronics, vol. 1, nº 3.
pp. 376-385.
Rahmani, S., Hermi, T., Fnaiech, F. et Al Haddad, Kamal.
2008.
« Modèle d’état moyen d’un filtre actif série triphasé de puissance pour la compensation des harmoniques de tension ».
In Conférence Internationale de la Journée Tunisiennes de l'Électrotechnique et de l'Automatique (JTEA) (Hammamet, Tunisie, 2-4 mai 2008)
Rahmani, Salem, Hamadi, Abdelhamid et Al Haddad, Kamal.
2008.
« A new single phase hybrid passive filter to dampen resonances and compensate harmonics and reactive power under distorted source conditions ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 473-478.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Rakotomanana, M. et Forgues, Daniel.
2008.
« Proposition d'un modèle d'affaires pour un centre favorisant l'innovation dans le secteur de la construction au Québec ».
In Canadian Society for Civil Engineering - Annual Conference of the Canadian Society for Civil Engineering 2008 - "Partnership for Innovation" (Quebec, QC, Canada, June 10-13, 2008)
pp. 211-219.
Montreal, Canada : Canadian Society for Civil Engineering.
Ramachandran, V., Ramachandran, R. P. et Gargour, Christian.
2008.
« New Z-domain continued fraction expansions based on an infinite number of mirror-image and anti-mirror-image polynomial decompositions ».
Journal of Circuits, Systems and Computers, vol. 17, nº 3.
pp. 487-498.
Ramudhin, Amar, Alzaman, Chaher et Bulgak, Akif A..
2008.
« Incorporating the cost of quality in supply chain design ».
Journal of Quality in Maintenance Engineering, vol. 14, nº 1.
pp. 71-86. Ramudhin, Amar et Chaabane, Amin. 2008. « Carbon market sensitive green supply chain network design ». Communication lors de la conférence : IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapour, Singapour, Dec. 8-11, 2008).
Ramudhin, Amar, Chaabane, Amin, Kharoune, Mourad et Paquet, Marc.
2008.
« A trade-off model for strategic planning of Carbon Market Sensitive Green Supply Chain Network Design ».
In Proceedings of the 14th Annual International Sustainable Development Research Conference (New Delhi, India, Sept. 21-23, 2008)
Ramudhin, Amar, Chaabane, Amin, Kharoune, Mourad et Paquet, Marc.
2008.
« Carbon market sensitive green supply chain network design ».
In IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapore, Singapore, Dec. 8-11, 2008)
pp. 1093-1097.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Ramudhin, Amar, Paquet, Marc, Artiba, Abdelhakim, Dupré, Pierre, Varvaro, Dominic et Thomson, Vince.
2008.
« A generic framework to support the selection of an RFID-based control system with application to the MRO activities of an aircraft engine manufacturer ».
Production Planning and Control, vol. 19, nº 2.
pp. 183-196.
Rathi, Yogesh, Michailovich, Oleg, Bouix, Sylvain et Shenton, Martha.
2008.
« Directional functions for orientation distribution estimation ».
In 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro (Paris, France, May 14-17, 2008)
pp. 927-930.
IEEE.
Rathi, Yogesh, Michailovich, Oleg, Bouix, Sylvain et Shenton, Martha E..
2008.
« Orientation distribution estimation for Q-ball imaging ».
In IEEE Computer Society Conference on Computer Vision and Pattern Recognition Workshops (Anchorage, AK, USA, June 23-28, 2008)
IEEE. Ratté, Sylvie et Mhiri, Faten. 2008. « Utilisation d'agents intelligents pour l'apprentissage personnalisé : méthodologie d'application ». Communication lors de la conférence : 76e Congrès de l'ACFAS-Colloque de l'AIPU (Québec, QC, Canada, 4-9 mai 2008).
Razzari, L., Sharma, G., Su, F., Ayesheshim, A., Blanchard, F., Reid, M., Bandulet, H. C., Morandotti, R., Keiffer, J. C., Ozaki, T., Teidje, H., Haugen, H. K. et Hegmann, F..
2008.
« Generation of intense THz pulses in ZnTe ».
In 21st Annual Meeting of the IEEE Lasers and Electro-Optics Society, 2008. LEOS 2008 (Acapulco, Mexico, Nov. 9-13, 2008)
p. 787.
IEEE.
Rejas, R., Cuadrado-Gallego, JJ., Sicilia, MA. et Abran, Alain.
2008.
« Information economy philosophy in universal education. the open educational resources (OER), technical, socioeconomics and legal aspects ».
In IEEE International Professional Communication Conference (IPCC) (Montreal, Canada, Jul.13-16, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rezaei, Mohammad Ali, Abdolmaleki, Parviz, Karami, Zahra, Asadabadi, Ebrahim Barzegari, Sherafat, Mohammad Amin, Abrishami-Moghaddam, Hamid, Fadaie, Marziyeh et Forouzanfar, Mohammad.
2008.
« Prediction of membrane protein types by means of wavelet analysis and cascaded neural networks ».
Journal of Theoretical Biology, vol. 254, nº 4.
pp. 817-820.
Rezki, Z., Haccoun, D. et Gagnon, François.
2008.
« Capacity of the discrete-time non-coherent memoryless MIMO channels at low SNR ».
In IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Cannes, France, Sept. 15-18, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rezki, Z., Haccoun, David et Gagnon, François.
2008.
« Capacity of the discrete-time non-coherent memoryless Gaussian channels at low SNR ».
In IEEE International Symposium on Information Theory (ISIT) (Toronto, Canada, Jul. 6-11, 2008)
pp. 121-125.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rezki, Z., Haccoun, David, Gagnon, François et Ajib, Wessam.
2008.
« Impact of spatial correlation on the finite-SNR diversity-multiplexing tradeoff ».
IEEE Transactions on Wireless Communications, vol. 7, nº 4.
pp. 1184-1189.
Ribeiro, R., Borges, A. P., Ulbricht, G. et Koerich L., Alessandro.
2008.
« Discovering of action policies in dynamic environments ».
Agora. Revista de Divulgaçao Cientifica, vol. 15, nº 1.
pp. 175-185. Robert, Jean-Marc (inventeur) 13 mai 2008. « Secret hashing for TCP SYN/FIN correspondence ». Alcatel Canada Inc. (titulaire(s)). Brevet américain US 7,373,663. Robert, Jean-Marc, D'Souza, Scott David et Kierstead, Paul (inventeurs) 9 décembre 2008. « Queuing methods for mitigation of packet spoofing ». Alcatel Lucent (titulaire(s)). Brevet américain US 7,464,398.
Rojo, G., Laforest, V., Glaus, M., Bourgois, J. et Hausler, Robert.
2008.
« Dynamic waste management (DWM) : a new step towards industrial ecology ».
In 4th International Conference on Waste Management and the Environment IV (Granada, Spain, June 2-4, 2008)
pp. 541-550.
Southampton, UK : WIT Press.
Roman, Dacian, Nerguizian, Vahé et Stiharu, Ion.
2008.
« Droplet evaporation in capillary bridges ».
In ASME 2008 Summer Bioengineering Conference (SBC) (Marco Island, FL, USA, June 25-29, 2008)
pp. 637-638.
New York, NY, USA : American Society of Mechanical Engineers.
Rong, Bo, Qian, Yi, Lu, Kejie et Kadoch, Michel.
2008.
« Call admission control for mobile agent based handoff in wireless mesh networks ».
In IEEE International Conference on Communications (ICC) (Beijing, China, May 19-23, 2008)
pp. 3274-3278.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Roth, Simon-Nicolas et Soulaïmani, Azzeddine. 2008. « Fast and accurate computational nonlinear aeroelasticity for wing optimization ». Communication lors de la conférence : 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS) (Venise, Italy, June 30-July 4, 2008).
Rousse, Daniel R..
2008.
« A frequency-based numerical approach for unsteady radiative transfer in participating media ».
Energy Conversion and Management, vol. 49, nº 11.
pp. 3259-3264. Rousse, Daniel R.. 2008. « Les nouvelles technologies de l’énergie, en bref ». Communication lors de la conférence : Forum Francophone des Affaires-Organisation Internationale de la Francophonie, Wendake, Septembre 2008 (Wendake, QC, Canada, 9-13 sept. 2008).
Rousse, Daniel et Lassue, S..
2008.
« A skew upwinding scheme for numerical radiative transfer ».
In Proceedings of CHT-08 ICHMT International Symposium on Advances in Computational Heat Transfer, May 11 - 16, 2008, Marrakesh, Morocco (Marrakesh, Morocco, May 11-16, 2008 )
Coll. « Begell digital library »
Redding, CT, USA : Begell House Inc..
Rousseau, M. Z., Cornick, S. M., Said, M. N., Maref, W. et Manning, M. M..
2008.
« PERD 079 project - task 4 - review of work plan and selection of wall assemblies ».
Coll. « Research Report », vol. IRC-RR-257.
NRC = CNRC. 29 p.
Rousseau, M. Z., Maref, W., Armstrong, M. M., Lei, W. et Nicholls, M..
2008.
« Recent experiments conducted in NRC-IRC moisture management facility ».
Construction Innovation, vol. 13, nº 3.
p. 7.
Roy, Jean-Philippe, Assaf, Gabriel J. et St-Jacques, Michèle.
2008.
« Quantification des coûts aux usagers de la route et à la collectivité au Québec ».
In 43e Congrès Annuel de l'Association Québécoise du Transport et des Routes (AQTR) (Québec, QC, Canada, 14-16 avril 2008)
Montréal, Canada : AQTR.
Roy, R., Chatelain, Jean-François, Mayer, R., Chalut, S. et Engin, S..
2008.
« Optimization of adaptive spiral toolpaths for pocket machining ».
In International Computer Aided Design Conference and Exhibition (CAD) (Orlando, FL, USA, June 23-27, 2008)
Roy, R., Chatelain, Jean-François, Mayer, R., Chalut, S. et Engin, S..
2008.
« Programming of a machining procedure for adaptive spiral cutting trajectories ».
In 10th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS) (Istanbul, Turkey, May 27-30, 2008)
pp. 127-132.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society (WSEAS).
Roy, Steven et Liu, Zhaoheng.
2008.
« Road vehicle suspension and performance evaluation using a two-dimensional vehicle model ».
International Journal of Vehicle Systems Modelling and Testing, vol. 3, nº 1-2.
pp. 68-93.
Sabourin, Robert, Ko, Albert H. R. et Britto, Jr.A..
2008.
« From dynamic classifier selection to dynamic ensemble selection ».
Pattern Recognition, vol. 41, nº 5.
pp. 1718-1731.
Sahmoudi, M. et Landry, René Jr..
2008.
« DOA estimation of spread sources with unknown bandwidth and center frequencies using robust beamforming ».
In IEEE 5th International Workshop on Signal Processing and its Applications (WoSPA’08) (Sharja, UAE, Mar. 18-20, 2008)
Sahmoudi, Mohamed, Amin, Moeness G. et Landry, René Jr.
2008.
« Acquisition of weak GNSS signals using a new block averaging pre-processing ».
In IEEE/ION Position, Location and Navigation Symposium (PLANS) (Monterey, CA, USA, May 5-8, 2008)
pp. 1362-1372.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Inc..
Sahmoudi, Mohamed et Landry, René Jr.
2008.
« Multipath mitigation techniques using maximum-likelihood principle ».
Inside GNSS, vol. 3, nº 8.
pp. 24-29.
Sahraii, Negin, Savaria, Yvon, Thibeault, Claude et Gagnon, François.
2008.
« Scheduling of turbo decoding on a multiprocessor platform to manage its processing effort variability ».
In Joint 6th International IEEE Northeast Workshop on Circuits and Systems and TAISA Conference (NEWCAS-TAISA) (Montreal, Canada, June 22-25, 2008)
pp. 73-76.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Saleet, Hanan, Langar, Rami, Basir, Otman et Boutaba, Raouf.
2008.
« Proposal and analysis of region-based location service management protocol for VANETs ».
In IEEE GLOBECOM 2008 - 2008 IEEE Global Telecommunications Conference (New Orleans, LA, USA, Nov. 30-Dec. 04, 2008)
pp. 491-496.
IEEE.
Sami, A., Frechette, M. F., David, Éric et Savoie, S..
2008.
« Water as a digression relative to the dielectric response in the frequency domain for polymer composites ».
In Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Quebec, Canada, Oct. 26-29, 2008)
pp. 501-504.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Samson, C., Mah, J., Holladay, S., Pollard, W. et Haltigin, T.. 2008. « An analogue geophysical survey of Arctic perennial springs and its relevance to the detection of water on Mars ». Communication lors de la conférence : 6th Canadian Space Exploration Workshop: Canadian Scientific Priorities for the Global Exploration Strategy (Montreal, QC, Canada, Dec. 01-03, 2008). Samson, Claire. 2008. « Synergy between terrestrial and space technologies: auto-synchronized 3D laser imaging and electromagnetic induction sounding ». Communication lors de la conférence : 34th Atlantic Geoscience Society Colloquium (Halifax, NS, Canada, Feb. 1-2, 2008). Samson, Claire, Mah, Jason, Holladay, Scott, Pollard, Wayne et Andersen, Dale. 2008. « Mapping brine pockets at Arctic perennial springs using an electromagnetic induction sounder: an analogue survey for the detection of water in the near-surface of Mars ». Affiche numéro S1.1_S11 présentée lors de la conférence : 19th International Workshop on Electromagnetic Induction in the Earth (Beijing, China, Oct. 23-29, 2008).
Sanjosé, M., Lederlin, T., Gicquel, L., Cuenot, B., Pitsch, H., García-Rosa, N., Lecourt, R. et Poinsot, T..
2008.
« LES of two-phase reacting flows ».
In Studying Turbulence Using Numerical Simulation Databases - XII : Proceedings of the 2008 Summer Program (Stanford, CA, USA, July 6-Aug. 01, 2008)
pp. 251-263.
Center for Turbulence Research.
Sanjosé, M., Riber, E., Gicquel, L., Cuenot, B. et Poinsot, T..
2008.
« Large eddy simulation of a two-phase reacting flow in an experimental burner ».
In Direct and Large-Eddy Simulation VII : Proceedings of the Seventh International ERCOFTAC Workshop on Direct and Large-Eddy Simulation (Trieste, Italy, Sept. 08-10, 2008)
Coll. « ERCOFTAC Series », vol. 13.
pp. 355-361.
Springer Netherlands.
Santana, Wilson Cesar, Al Haddad, Kamal et Da Silva, Luiz Eduardo Borges.
2008.
« A characteristic impedance estimator to be used on active resonance dampers ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 2679-2683.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Santos, M., Oliveira, L., Sabourin, Robert, Koerich, A. et Britto Jr., A..
2008.
« Combinando caracteristicas complementares em modelos escondidos de markov: uma otimizaçao para o reconhecimento de caracteres manuscritos ».
In Conferencia Latinoamericana de Informatica (CLEI) (Santa Fe, Argentina, Sept. 8-12, 2008)
pp. 260-269.
Sarker, Jahangir H., Dziong, Zbigniew et Gagnon, François.
2008.
« Multi-user receiver capacity optimization for Ad Hoc networks ».
In 24th Biennial Symposium on Communications (BSC) (Kingston, Canada, June 24-26, 2008)
pp. 324-327.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Sassi, S., Badri, B. et Thomas, Marc.
2008.
« Tracking surface degradation of ball bearings by means of new time domain scalar indicators ».
International Journal of COMADEM, vol. 11, nº 3.
pp. 36-45.
Saussié, David, Saydy, Lahcen et Akhrif, Ouassima.
2008.
« Gain scheduling control design for a pitch-axis missile autopilot ».
In AIAA Guidance, Navigation, and Control Conference and Exhibit (Honolulu, HI, USA, Aug. 18-21, 2008)
Coll. « AIAA paper »
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc. Savard, Geneviève et Pineau, Kathleen. 2008. « Tasks in calculus: Results of a 9-year evolution ». Communication lors de la conférence : Congrès TIME-2008 : Technology and its Integration into Mathematics Education (South Africa, 22-26 Sept. 2008). Savard, Geneviève et Pineau, Kathleen. 2008. « Évolution du cours Calcul différentiel et intégral depuis l’arrivée de la calculatrice symbolique à l’ÉTS ». Communication lors de la conférence : Congrès de l’Association mathématique du Québec (AMQ) (Thetford Mines, QC, Canada, Oct. 2008).
Savaria, Yvon, Sahraii, Neguin, Thibeault, Claude et Gagnon, François.
2008.
« Modeling and Dynamic Scheduling of Turbo Decoding for a Homogeneous Multiprocessor Platform ».
In CMOS Emerging Technologies Workshop (Vancouver, BC, Canada, Aug. 5-7, 2008)
Sayadi, Mounir, Sakrane, Samir, Fnaiech, Farhat et Cheriet, Mohamed.
2008.
« Gray-level texture characterization based on a new adaptive nonlinear auto-regressive filter ».
Electronic Letters on Computer Vision and Image Analysis, vol. 7, nº 1.
pp. 40-53.
Sedraoui, K., Fnaiech, Farhat et Al Haddad, Kamal.
2008.
« Solutions for power quality using the advanced UPFC - control strategy and case study ».
International Review of Electrical Engineering, vol. 3, nº 5.
pp. 811-819.
Seers, Patrice, Reguillet, V., Plamondon, E., Dufresne, Louis et Hallé, Stéphane.
2008.
« Evaporation time of gasoline and diesel fuel droplets on a hot plate : the influence of fuel deposits ».
In ASME International Mechanical Engineering Congress and Exposition (IMECE) (Boston, MA, USA, Oct. 31-Nov. 6, 2008)
Coll. « ASME Conference Proceedings »
pp. 577-583.
New York, NY, USA : American Society of Mechanical Engineers.
Senoner, Jean-Mathieu, Sanjosé, M., Lederlin, T., Jaegle, F., Riber, E., Cuenot, B., Gicquel, L., Pitsch, H. et Poinsot, T..
2008.
« Evaluation of numerical strategies for two-phase reacting flows ».
In 2nd INCA workshop (INitiative en Combustion Avancée) (Rouen, France, Oct. 23-24, 2008)
Siddiqi, K., Zhang, J., MacRini, D., Shokoufandeh, A., Bouix, S. et Dickinson, S..
2008.
« Retrieving articulated 3-D models using medial surfaces ».
Machine Vision and Applications, vol. 19, nº 4.
pp. 261-275.
Siddiqi, Kaleem, Bouix, Sylvain et Shah, Jayant.
2008.
« Skeletons via shocks of boundary evolution ».
In
Medial representations.
Coll. « Computational Imaging and Vision », vol. 37.
pp. 127-154. Springer Netherlands.
Silla Jr, Carlos N., Koerich, Alessandro L. et Kaestner, Celso A. A..
2008.
« The latin music database ».
In 9th International Conference on Music Information Retrieval, ISMIR 2008, September 14, 2008 - September 18, 2008 (Philadelphia, PA, USA, Sept. 14-18, 2008)
pp. 451-456.
Philadelphia, PA, USA : Drexel University.
Silla, Carlos N. Jr, L. Koerich, Alessandro et Kaestner, Celso A. A..
2008.
« Feature selection in automatic music genre classification ».
In 10th IEEE International Symposium on Multimedia, ISM 2008 (Berkeley, CA, USA, Dec. 15-17, 2008)
pp. 39-44.
IEEE.
Silla, Carlos N., Koerich, Alessandro L. et Kaestner, Celso A. A..
2008.
« A machine learning approach to automatic music genre classification ».
Journal of the Brazilian Computer Society, vol. 14, nº 3.
pp. 7-18. Simoneau, R., Thibault, D. et Fihey, Jean-Luc. 2008. « A comparison of residual stress in hammer-peened, multi-pass steel welds - A514 (S690Q) and S41500 ». Communication lors de la conférence : 61st Annual Assembly of the International Welding Institute (Graz, Austria, July 6-11, 2008).
Singh, Bhim, Gairola, Sanjay, Chandra, Ambrish et Al Haddad, Kamal.
2008.
« Design and development of T-connected transformer based 24-pulse AC-DC rectifier ».
In IEEE Power Electronics Specialists Conference (PESC) (Rhodes, Greece, June 15-19, 2008)
pp. 1441-1447.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Gairola, Sanjay, Singh, Brij N., Chandra, Ambrish et Al-Haddad, Kamal.
2008.
« Multipulse AC-DC converters for improving power quality: a review ».
IEEE Transactions on Power Electronics, vol. 23, nº 1.
pp. 260-281.
Singh, Bhim, Jayaprakash, P., Somayajulu, T. R., Kothari, D. P., Chandra, Ambrish et Al Haddad, Kamal.
2008.
« Integrated three-leg VSC with a zig-zag transformer based three-phase four-wire DSTATCOM for power quality improvement ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 796-801.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Singh, Bhim, Jayaprakash, P, Kothari, D P, Chandra, Ambrish et Al Haddad, Kamal.
2008.
« Indirect control of capacitor supported DVR for power quality improvement in distribution system ».
In IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century (PES) (Pittsburgh, PA, USA, Jul. 20-24, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Kasal, Gaurav Kumar, Chandra, Ambrish et Al Haddad, Kamal.
2008.
« A frequency based electronic load controller for an isolated asynchronous generator feeding 3-phase 4-wire loads ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Cambridge, UK, June 30-July 2, 2008)
pp. 1513-1518.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Kasal, Gaurav Kumar, Chandra, Ambrish et Al Haddad, Kamal.
2008.
« An independent active and reactive power control of an isolated asynchronous generator in 3-phase 4-wire applications ».
In IEEE Power Electronics Specialists Conference (PESC) (Rhodes, Greece, June 15-19, 2008)
pp. 2057-2063.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Kasal, Gaurav Kumar, Chandra, Ambrish et Al Haddad, Kamal.
2008.
« Capacitor excited asynchronous generator for an isolated wind energy conversion system ».
In Joint International Conference on Power System Technology and IEEE Power India Conference (POWERCON) (New Delhi, India, Oct. 12-15, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Singh, Bhim, Kasal, Gaurav Kumar, Chandra, Ambrish et Al Haddad, Kamal.
2008.
« Voltage and frequency controller for an autonomous micro hydro generating system ».
In IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century (PES) (Pittsburgh, PA, USA, Jul. 20-24, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Singh, Mukhtiar et Chandra, Ambrish.
2008.
« Power maximization and voltage sag/swell ride-through capability of PMSG based variable speed wind energy conversion system ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 2206-2211.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Singleton, A., Samson, C., Holladay, S., Osinski, O. et Williamson, M.-C..
2008.
« Electromagnetic characterization of polar ice wedge polygons on Axel Heiberg and Devon Islands, Nunavut, Canada ».
In 14th Astronautics Conference of the Canadian Aeronautics and Space Institute (ASTRO 2008) (Montreal, QC, Canada, Apr. 29-May 01, 2008)
Canadian Aeronautics and Space Institute. Singleton, A.C., Osinski, G., Samson, C., Holladay, S. et Williamson, M.-C.. 2008. « Using electromagnetic induction sounding to characterize polar ice wedge polygons in the Canadian Arctic ». Communication lors de la conférence : Joint Annual Meeting GAC-MAC-SEG-SGA (Quebec City, QC, Canada, May 23-30, 2008). Singleton, A.C., Osinski, G.R., Samson, C., Williamson, M.-C. et Holladay, S.. 2008. « Electromagnetic characterization of polar ice wedge polygons on Axel Heiberg and Devon Islands, Nunavut, Canada ». Communication lors de la conférence : 6th Canadian Space Exploration Workshop: Canadian Scientific Priorities for the Global Exploration Strategy (Montreal, QC, Canada, Dec. 01-03, 2008). Singleton, A.C., Samson, C., Osinski, G., Williamson, M.-C. et Holladay, S.. 2008. « Electromagnetic characterization of ice wedge polygons on Axel Heiberg and Devon Islands, Nunavut, Canada ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Apr. 10-11, 2008).
Soltani, Reza, David, Éric et Lamarre, Laurent.
2008.
« Temperature effect on dielectric characteristics of large rotating machines insulation ».
In Conference Record of the 2008 IEEE International Symposium on Electrical Insulation (ISEI) (Vancouver, Canada, June 9-12, 2008)
pp. 280-283.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Soltani, Reza, David, Éric, Lamarre, Laurent et Lafortune, Luc.
2008.
« Effect of humidity on charge and discharge current of large rotating machines bar insulation ».
In Conference Record of the 2008 IEEE International Symposium on Electrical Insulation (ISEI) (Vancouver, Canada, June 9-12, 2008)
pp. 412-415.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Songmene, Victor, Balout, B. et Masounave, Jacques.
2008.
« Clean machining : experimental investigation on dust formation : Part II : influence of machining strategies and drill condition ».
International Journal of Environmentally Conscious Design & Manufacturing, vol. 14, nº 1.
pp. 17-33.
Songmene, Victor, Balout, B. et Masounave, Jacques.
2008.
« Clean machining: experimental investigation on dust formation - Part I: influence of machining parameters and chip formation ».
International Journal of Environmentally Conscious Design & Manufacturing , vol. 14, nº 1.
pp. 1-16.
Songmene, Victor, Masounave, Jacques et Khettabi, R..
2008.
« L'émission de poussières pendant l'usinage à sec : une synthèse ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Souissi, Mohamed Ghassen, Grati, Khaled, Ghazel, Adel et Kouki, Ammar B..
2008.
« Software efficient implementation of GMSK modem for an automatic identification system transceiver ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Niagara Falls, Canada, May 4-7, 2008)
pp. 601-606.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Soulaïmani, Azzeddine et Fahsi, A.. 2008. « Application des techniques de fiabilité pour l'estimation des incertitudes des résultats de simulations numériques en hydrodynamique des rivières ». Communication lors de la conférence : Symposium International sur les Incertitudes en Modélisation Hydrologique et Hydraulique (Montréal, QC, Canada, Oct. 15-17, 2008). Soulaïmani, Azzeddine, Zokagoa, Jean-Marie, Quach, T. et Tchamen, G.W.. 2008. « Modeling of wetting-drying transitions in free surface and over complex topographies ». Communication lors de la conférence : 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS) (Venise, Italy, June 30-July 4, 2008).
Soulez, G., Allard, L., Heon, H., Qi, S., Lavoie, J., Lerouge, S. et Cloutier, G..
2008.
« Creation of carotid atheromatous plaque in a diabetic pig model ».
[Résumé d'une communication à une conférence]. Journal of Vascular and Interventional Radiology, vol. 19, nº 2, suppl..
S31.
Soulez, G., Lerouge, S., Allard, L., Heon, H., Giroux, M. F., Oliva, V. et Cloutier, G..
2008.
« Modèle porcin de plaque athéromateuse carotidienne ».
[Résumé d'une communication à une conférence]. Journal de Radiologie, vol. 89, nº 10.
p. 1225.
Soulez, Gilles, Lerouge, Sophie, Darsaut, Tim, Salazkin, Igor, Oliva, Vincent L et Raymond, Jean.
2008.
« Role of the endothelial lining in endoleak formation and persistence after endovascular repair of aneurysm ».
Journal of Vascular and Interventional Radiology, vol. 19, nº 7.
pp. 1070-1078.
Souza, Flavia R. et Melhado, Silvio B..
2008.
« The design process research in Brazil from 1995 to 2007 ».
In Design Management in the Architectural Engineering and Construction Sector. CIB W096 Architectural Management and CIB TG49 Architectural Engineering Conference (São Paulo, Brazil, Nov. 04-08, 2008)
pp. 295-306.
Rotterdam : CIB.
Souza, Flávia R. et Melhado, Silvio Burratino.
2008.
« A importância do sistema de informação para a gestão das empresas de projeto ».
Gestão & Tecnologia de Projetos, vol. 3, nº 1.
pp. 121-139.
Souza, Flavia, Wyse, Mariana, Hukai, Melissa et Melhado, Sílvio Burrattino.
2008.
« Análise da interdependência entre as ações rotineiras em uma empresa de projeto e a sua gestão: aquisição de uma ferramenta de trabalho ».
In Anais do VIII Workshop Brasileiro Gestão do Processo de Projetos na construção de Edifícios (São Carlos, Brasil, Nov. 03-04, 2008)
São Paulo : USP.
Souza, Flavia, Wyse, Mariana, Hukai, Melissa et Melhado, Sílvio Burrattino.
2008.
« Implementação do modelo de gestão para pequenas empresas de projeto: Análise da etapa de gestão financeira e gestão de recursos humanos em uma empresa de projeto de esquadrias ».
In XII Encontro nacional de tecnologia do ambiente construído : Anais do ENTAC 2008 (Fortaleza, Brazil, Oct. 07-10, 2008)
Porto Alegre : ANTAC. St-Georges, K., Pellerin, R., Hajji, A. et Gharbi, Ali. 2008. « Simulating the ERP diffusion behaviour in industrial networks ». Communication lors de la conférence : International Workshop on Enterprise Information Systems (ENTISY) (Sliema, Malta, Oct. 26-31, 2008).
St-Jacques, Michèle, Pellecuer, Luc et Brosseaud, Y..
2008.
« Influence de la qualité du revêtement sur la sécurité routière ».
In 14e Édition de la Semaine des Infrastructures Urbaines (INFRA) (Québec, QC, Canada, 17-19 nov. 2008)
Montréal, Canada : Centre d'Expertise et de Recherche en Infrastructures Urbaines (CERIU).
St-Martin, S., Chatelain, Jean-François, Mayer, R., Engin, S. et Chalut, S..
2008.
« Simulation de l'usinage de finition des parois minces de composantes aéronautiques en alliage léger ».
In Colloque sur la Recherche en Conception Assistée par Ordinateur (CAO) au Québec (Trois-Rivières, QC, Canada, 14 mai 2008)
St-Martin, Serge, Chatelain, Jean-François, Mayer, René, Engin, Serafettin et Chalut, Stéphane.
2008.
« Time domain simulation of thin wall surface finish machining for light alloy aerospace components ».
In Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
Sun, S., Yang, D., Villers, D., Zhang, G., Sacher, E. et Dodelet, J. P..
2008.
« Template- and surfactant-free room temperature synthesis of self-assembled 3D Pt nanoflowers from single-crystal nanowires ».
Advanced Materials, vol. 20, nº 3.
pp. 571-574.
Suryn, Witold, Salmi, B., Ross, M. et Stapples, G..
2008.
« The applicability of ISO/IEC 9126-2 external software quality measures in context of ISO/IEC 12207 generic software lifecycle model ».
In 16th International Conference on Software Quality Management (Ulster, Irland, Mar. 18-19, 2008)
pp. 201-214.
British Computer Society. Swinton, M. C. et Maref, W.. 2008. « Performing basement systems : Part 2 : Managing heat and moisture ». Communication lors de la conférence : Building Science Insight : Single and Multi-Family Houses : Improving Prformance of Wall Systems approach (Canada, Oct. 01, 2008). Swinton, M. C. et Maref, W.. 2008. « Performing basement systems : Part I : Managing the water ». Communication lors de la conférence : Building Science Insight : Single and Multi-Family Houses : Improving Prformance of Wall Systems approach (Canada, Oct. 01, 2008).
Szymanski, A., Masounave, J., Viens, M. et Litwin, J..
2008.
« Émission de poussière par frottement ».
In Colloque USIFORME 2007 (Montréal, QC, Canada, 3-5 mars 2008)
Tadj, Chakib et Ramdane-Cherif, Amar.
2008.
« Context-aware dynamic architecture ».
In WMSCI 2008 - The 12th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 14th International Conference on Information Systems Analysis and Synthesis, ISAS 2008 - Proc. (Orlando, FL, United states, June 29-July 2, 2008)
pp. 68-72.
International Social Science Council,ISSC.
Taleb, M., Seffah, A., Abran, A. et Habieb-Mammar, H..
2008.
« Reconciling usability and interactive system architecture using patterns ».
Journal of Systems and Software, vol. 81, nº 11.
pp. 1845-1852.
Taleb, M., Seffah, A. et Abran, Alain.
2008.
« Pattern-oriented architecture for Web applications ».
In 3rd International Conference on Web Information Systems and Technologies (WEBIST) (Barcelona, Spain, March 3-6, 2007)
pp. 117-121.
Setubal, Portugal : INSTICC Press.
Talhi, Chamseddine, Tawbi, Nadia et Debbabi, Mourad.
2008.
« Execution monitoring enforcement under memory-limitation constraints ».
Information and Computation, vol. 206, nº 2-4.
pp. 158-184.
Tan Dan, D., Bouzid, Hakim et Dao, Thien-My.
2008.
« Effect of bolt spacing on the circumferential distribution of gasket contact stress in bolted flange joints ».
In 16th International Conference on Nuclear Engineering (ICONE) (Orlando, FL, USA, May 11-15, 2008)
pp. 207-216.
New York, NY, USA : American Society of Mechanical Engineers. Tanguay, F., Mac Thiong, J. M., Wang, Z., de Guise, J. A. et Labelle, H.. 2008. « Importance clinique de la mesure de la cyphose lombosacrée dans le spondylolisthésis ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Tanguay, F., Mac-Thiong, J. M., Wang, Z., de Guise, Jacques A. et Labelle, H.. 2008. « Comment évaluer la sévérité du spondylolisthésis et son impact clinique ». Communication lors de la conférence : 38e Réunion Annuelle de la Société de la Scoliose du Québec (Québec, QC, Canada, 6-8 nov. 2008).
Tardif, Olivier et Ratté, Sylvie.
2008.
« A lightweight pronoun resolution algorithm for french corporate texts ».
In International Conference on Advanced Computer Theory and Engineering (ICACTE) (Phuket, Thaïland, Dec. 20-22, 2008)
pp. 714-718.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society. Tayong, Rostand, Dupont, Thomas, Galland, Marie-Annick et Leclaire, Philippe. 2008. « High sound pressure models for microperforated panels backed by an air cavity ». Communication lors de la conférence : Congrès Français d'Acoustique (Paris, France, 29 juin - 04 juillet 2008).
Temini, M., Leconte, Robert et Lhanbilvardi, R..
2008.
« An automated multi-satellite approach for soil moisture mapping using visible/infrared, passive microwave data and topographic attributes ».
In IEEE International Geoscience and Remote Sensing Symposium (IGARSS) (Boston, MA, USA, Jul. 7-11, 2008)
II-777-II-780.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Terriault, Patrick, Lafortune, P., Plamondon, Dominic et Brailovski, Vladimir.
2008.
« Design of a progressively expandable stent using finite elements ».
In Biomedical Applications of Smart Materials (Acireale, Sicily, Italy, June 8-13, 2008)
Coll. « Advances in Science and Technology », vol. 57.
pp. 241-246.
Uetikon-Zuerich, Switzerland : Trans Tech Publications Ltd. Toews, Matthew. 2008. « A probabilistic model to learn, detect, localize and classify patterns in arbitrary images ». Thèse de doctorat. Montreal, McGill University, 183 p.
Tolouee, A., Abrishami-Moghaddam, H., Garnavi, R., Forouzanfar, M. et Giti, M..
2008.
« Texture analysis in lung HRCT images ».
In Digital Image Computing: Techniques and Applications (DICTA) (Canberra, ACT, Australia, Dec. 01-03, 2008)
pp. 305-311.
IEEE Computer Society.
Torra, V, Isalgue, A, Auguet, C, Lovey, F.C, Pelegrina, J.L et Terriault, Patrick.
2008.
« Pre-stressed NiTi: effects of the thermodynamics forces and time ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 55-62.
Materials Park, OH : ASM International.
Torra, V, Isalgue, I, Martorell, F, Lovey, F.C, Soul, H et Terriault, Patrick.
2008.
« Fatigue life in NiTi for damping applications ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 159-166.
Materials Park, OH : ASM International.
Tran, Con et Dziong, Zbigniew.
2008.
« Resource adaptation for continuous profit optimization in Overlay and Virtual Networks ».
In IEEE Next Generation Internet Networks (NGI) (Krakow, Poland, April 28-30, 2008)
pp. 131-138.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society. Tremblay, Christine. 2008. « Filterless optical networking : basic concepts and case studies ». Communication lors de la conférence : Physics Seminar Series, University of Ottawa (Ottawa, ON, Canada, Mar.27, 2008). Tremblay, Christine. 2008. « Introduction to filterless optical networking ». Communication lors de la conférence : 5th Workshop on Optimization of Optical Networks (OON) (Montreal, QC, Canada, May 7-8, 2008).
Tremblay, José-Philippe, Savaria, Yvon, Thibeault, Claude et Mbaye, Maria.
2008.
« Improving resource utilization in an multiple asynchronous ALU DSP architecture ».
In 1st Microsystems and Nanoelectronics Research Conference (MNRC) (Ottawa, Canada, Oct. 15, 2008)
pp. 25-28.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Truchon, G, Noël, A., Cloutier, Y., Maghni, K., Gautrin, D, Hallé, Stéphane, Dufresne, Louis, Dolez, Patricia et Tardif, R..
2008.
« La recherche en nanotoxicologie: par où commencer ? ».
Travail et Santé, vol. 24, nº 2.
pp. 32-35.
Truchon, Ginette, Cloutier, Yves, Hallé, Stéphane, Dolez, Patricia, Gautrin, Denyse, Lara, Jaime, Tardif, Robert, Dufresne, Louis et Morency, François.
2008.
« Nanoparticules : situation actuelle et pistes de recherche ».
. 46 p. Trudel, M., Camporese, M., Charbonneau, F., Leconte, Robert et Paniconi, C.. 2008. « Assimilation of ENVISAR ASAR data and soil moisture profile measures in a distributed hydrological model ». Communication lors de la conférence : Catchment-Scale Hydrological Modelling and Data Assimilation International Workshop (Melbourne, Australia, Jan. 9-11, 2008).
Trudel, Mélanie, Charbonneau, François et Leconte, Robert.
2008.
« Surface roughness classification with multipolarized C-band SAR data ».
In IEEE International Geoscience and Remote Sensing Symposium (IGARSS) (Boston, MA, USA, Jul. 7-11, 2008)
pp. 727-730.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Trudel, Sylvie et Abran, Alain.
2008.
« Improving quality of functional requirements by measuring their functional size ».
In Software Process and Product Measurement : International Workshop IWSM 2008, Metrikon 2008, and Mensura 2008 Munich, Germany, November 18-19, 2008. Proceedings (Munich, Germany, Nov. 18-19, 2008)
Coll. « Lecture Notes in Computer Science », vol. 5338.
pp. 287-301.
Heidelberg, Germany : Springer Verlag.
Tu, X., Dessaint, Louis-A., Champagne, Roger et Al Haddad, Kamal.
2008.
« Transient model of induction machine using rotating magnetic field approach ».
In 9th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (ELECTRIMACS) (Quebec, QC, Canada, June 8-11, 2008)
Tu, Xiaoping, Dessaint, Louis-A., Champagne, Roger et Al Haddad, Kamal.
2008.
« Transient modeling of squirrel-cage induction machine considering air-gap flux saturation harmonics ».
IEEE Transactions on Industrial Electronics, vol. 55, nº 7.
pp. 2798-2809.
Turcot, Katia, Aissaoui, Rachid, Boivin, Karine, Hagemeister, Nicola, Pelletier, Michel et de Guise, Jacques A..
2008.
« Test-retest reliability and minimal clinical change determination for 3-dimensional tibial and femoral accelerations during treadmill walking in knee osteoarthritis patients ».
Archives of Physical Medicine and Rehabilitation, vol. 89, nº 4.
pp. 732-737.
Turcot, Katia, Aissaoui, Rachid, Boivin, Karine, Pelletier, Michel, Hagemeister, Nicola et de Guise, Jacques A..
2008.
« New accelerometric method to discriminate between asymptomatic subjects and patients with medial knee osteoarthritis during 3-D gait ».
IEEE Transactions on Biomedical Engineering, vol. 55, nº 4.
pp. 1415-1422.
Ung, Bora et Sheng, Yunlong.
2008.
« Optical surface waves over metallo-dielectric nanostructures: Sommerfeld integrals revisited ».
Optics Express, vol. 16, nº 12.
pp. 9073-9086. Uta, E., Bocher, Philippe, Gey, N., Humbert, M. et Gilbert, J.. 2008. « EBSD analysis of Dwell-fatigue fracture surface in titanium alloy IMI 834 ». Communication lors de la conférence : JIP, Fatigue and Plasticity : from Mechanisms to Design (Paris, France, May 20-22, 2008).
Uta, E., Bocher, Philippe, Gey, N., Humbert, M. et Gilgert, J..
2008.
« EBSD analyses of dwell fracture surface in titanium alloy IMI-834 ».
In International Conference Fatigue and Plasticity From Mechanisms to Design (JIP) (Paris, France, May 20-22, 2008)
pp. 315-322.
Valera, Ticiane Sanches et Demarquette, Nicole Raymonde.
2008.
« Polymer toughening using residue of recycled windshields: PVB film as impact modifier ».
European Polymer Journal, vol. 44, nº 3.
pp. 755-768.
Valle J. D., Jr., Oliveira, L. E. S. et Koerich, Alessandro L..
2008.
« Automatic people counting in videos from oblique viewing cameras ».
In IEEE Andescon 2008 (Cuzco, Peru, Oct. 15-17. 2008)
Valorge, Olivier, Nguyen, Anh Tuan, Blaquière, Yves, Norman, Richard et Savaria, Yvon.
2008.
« Digital signal propagation on a wafer-scale smart active programmable interconnect ».
In 15th IEEE International Conference on Electronics, Circuits and Systems (ICECS) (St. Julian's, Malta, Aug. 31 - Sept. 03, 2008)
pp. 1059-1062.
IEEE.
Van Bang, Damien Pham, Lefrançois, Emmanuel, Sergent, Philippe et Bertrand, François.
2008.
« Expérimentation par IRM et modélisation par éléments finis de la sédimentation-consolidation des vases ».
[Article de conférence]. Houille Blanche, vol. 94, nº 3.
pp. 39-44.
Vázquez, Carlos et Tam, Wa James .
2008.
« 3D-TV: coding of disocclusions for 2D+depth representation of multi-view images ».
In Proceedings of the Tenth IASTED International Conference on Computer Graphics & Imaging : February 13-15, 2008, Innsbruck, Austria (Innsbruck, Austria, Feb. 13-15, 2008)
pp. 26-33.
Anaheim, CA, USA : ACTA Press.
Vellasques, E., Oliveira, Luiz S., Britto, Alceu de Souza, Koerich, Alessandro L. et Sabourin, Robert.
2008.
« Filtering segmentation cuts for digit string recognition ».
Pattern Recognition, vol. 41, nº 10.
pp. 3044-3053.
Vo, P., Jahazi, M. et Yue, S..
2008.
« Recrystallization during thermomechanical processing of IMI834 ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 39, nº 12.
pp. 2965-2980.
Voix, Jérémie, Behar, Alberto et Wong, Willy.
2008.
« The ANSI standard S12. 68-2007 method of estimating effective a-weighted sound pressure levels when hearing protectors are worn: A canadian perspective ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 36, nº 3.
pp. 94-95.
Voix, Jérémie et Canetto, P..
2008.
« Hearing Protectors “real world” performance and the European directive 2003/10/EC. Workshop held at INRS Paris July 4th, 2008 : Source Book ».
. 40 p.
Voix, Jérémie, Cocq Jr, Cécile Le et Hager, Lee D..
2008.
« The healthy benefits of isolating earphones ».
In Proceedings of Meetings on Acoustics (France, Paris, June 29- July 4, 2008)
Melville, NY, USA : Acoustical Society of America.
Voix, Jérémie et Zeidan, Jean.
2008.
« A longitudinal statistical review of a dozen laboratory tests on an instantly custom-fitted earplug ».
In Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08 (Dearborn, MI, USA, July 28-31, 2008)
pp. 728-737.
Institute of Noise Control Engineering of the USA.
Vu, Viet Hung.
2008.
« ARX model for identification of bridge modal properties under live loading ».
In Annual Conference of the Canadian Society for Civil Engineering, 2008 : "Partnership for innovation" ; June 10-13, 2008, Quebec City, Quebec, Canada (Quebec City, QC, Canada, June 10-13, 2008)
pp. 2004-2013.
Montréal : Canadian Society for Civil Engineering = Société canadienne de génie civil.
Vu-Khanh, Toan et El Majdoubi, M..
2008.
« Vieillissement physique du biomatériau polypropylène et ses effets sur les propriétés mécaniques ».
In 5e Édition des Journées d'Études Techniques (JET) (Marrakeck, Maroc, 7-9 mai 2008)
Wagnac, Éric, Aubin, C. E. et Dansereau, J..
2008.
« A new method to generate a patient-specific finite element model of the human buttocks ».
IEEE Transactions on Biomedical Engineering , vol. 55, nº 2.
pp. 774-783.
Wang, C. M., Chao, C. C., Huang, H. I., Ung, B., Sheng, Y. et Chang, J. Y..
2008.
« Transmission enhancement through a metallic slit assisted by low scattering loss corrugations ».
Optics Communications, vol. 281, nº 10.
pp. 2996-2999.
Wang, X., Jahazi, M. et Yue, S..
2008.
« Investigation of α platelet boundaries in a near-α titanium alloy ».
Materials Science and Engineering: A, vol. 492, nº 1–2.
pp. 450-454. Wang, Z., Mac-Thiong, J.-M., Parent, S., Petit, Yvan et Labelle, H.. 2008. « La relation entre la morphologie du sacrum et du bassin dans le spondylolisthésis : étude de corrélation ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Wang, Z., Parent, S., Mac-Thiong, J.-M., Petit, Yvan et Labelle, H.. 2008. « Influence of sacral morphology in developmental spondylolisthesis ». Communication lors de la conférence : 63rd Canadian Orthopaedic Association Annual Meeting (Quebec, QC, Canada, June 4-7, 2008). Wang, Z., Parent, S., Mac-Thiong, J.-M., Petit, Yvan et Labelle, H.. 2008. « L'influence de la morphologie du sacrum sur le spondylolisthésis développemental ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008).
Wang, Zhi, Parent, Stefan, Mac-Thiong, J. M., Petit, Yvan et Labelle, Hubert.
2008.
« Influence of sacral morphology in developmental spondylolisthesis ».
Spine, vol. 33, nº 20.
pp. 2185-2191.
Wanjara, P. et Jahazi, M..
2008.
« Assessing mechanical property gradients associated with microstructural changes in stainless steel weldments by shear punch testing ».
In International Symposium on Recent Developments in Advanced High Strength Steels Processing 2008 : Held at the 47th Conference of Metallurgists (COM) 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 195-206.
Canadian Institute of Mining Metallurgy & Petroleum.
Wanjara, P. et Jahazi, M..
2008.
« Characterization of electron beam welded 17-4 ph stainless steel ».
Canadian Metallurgical Quarterly, vol. 47, nº 4.
pp. 413-436.
Wanjara, P., Poirier, E. et Jahazi, M. C..
2008.
« Manufacture of a strut on a captive trajectory system by electron beam welding ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 243-254.
Canadian Institute of Mining Metallurgy & Petroleum.
Weis, Timothy M. et Ilinca, Adrian.
2008.
« The utility of energy storage to improve the economics of wind-diesel power plants in Canada ».
Renewable Energy, vol. 33, nº 7.
pp. 1544-1557.
Weis, Timothy M., Ilinca, Adrian et Pinard, Jean-Paul.
2008.
« Stakeholders' perspectives on barriers to remote wind-diesel power plants in Canada ».
Energy Policy, vol. 36, nº 5.
pp. 1611-1621.
Weiss, Julien.
2008.
« Model vibrations and inertial bias measurement in a transonic wind tunnel test ».
In 26th AIAA Aerodynamic Measurement Technology and Ground Testing Conference (Seattle, WA, USA, June 23-26, 2008)
Coll. « AIAA Paper »
American Institute of Aeronautics and Astronautics.
Weston, G., Samson, C., Boteler, D. et Raymond, D..
2008.
« Monitoring telluric currents on water mains ».
In 14th Astronautics Conference of the Canadian Aeronautics and Space Institute (ASTRO 2008) (MontreaL, QC, Canada, Apr. 29-May 01, 2008)
Canadian Aeronautics and Space Institute.
Woodward, L., Perrier, M. et Srinivasan, B..
2008.
« Correction for non-identical units in multi-unit optimization ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 41, nº 2.
pp. 7931-7936.
Yang, Lijun J., Zmeureanu, Radu et Rivard, Hugues.
2008.
« Comparison of environmental impacts of two residential heating systems ».
Building and Environment, vol. 43, nº 6.
pp. 1072-1081.
Yeo, Chee Shin, Buyya, Rajkumar, Dias de Assunção, Marcos, Yu, Jia, Sulistio, Anthony, Venugopal, Srikumar et Placek, Martin.
2008.
« Utility Computing on Global Grids ».
In
Handbook of computer networks: Distributed networks, network planning, control, management, and new trends and applications.
pp. 110-130. John Wiley & Sons.
Yeste Ojeda, Omar A. et Grajal, Jesus.
2008.
« Cyclostationarity-based signal separation in interceptors based on a single sensor ».
In IEEE Radar Conference, 2008. RADAR '08 (Rome, Italy, May 26-30, 2008)
IEEE.
Yeste-Ojeda, Omar A., Grajal, Jesus et Lopez-Risueño, Gustavo.
2008.
« Atomic decomposition for radar applications ».
IEEE Transactions on Aerospace and Electronic Systems, vol. 44, nº 1.
pp. 187-200.
Younsi, Z., Zalewski, L., Rousse, Daniel, Joulin, A. et Lassue, S..
2008.
« Thermophysical characterization of phase change material with flux sensors ».
In Proceedings : 5th European Thermal-Sciences Conference : 18-22 may 2008, Eindhoven, the Netherlands : EUROTHERM 2008 (Eindhoven, The Netherlands, May 18-22, 2008)
Eindhoven, The Netherlands : Eindhofen University of Technology.
Yu, Alexander, Bonev, Ilian A. et Zsombor-Murray, Paul.
2008.
« Geometric approach to the accuracy analysis of a class of 3-DOF planar parallel robots ».
Mechanism and Machine Theory, vol. 43, nº 3.
pp. 364-375.
Zabaiou, Tarik, Dessaint, Louis-A., Okou, Francis- A. et Grondin, Robert.
2008.
« Wide-area measurements based coordination of SVCs and synchronous generators ».
In IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century (PES) (Pittsburgh, PA, USA, Jul. 20-24, 2008)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Zabaiou, Tarik, Okou, Francis A., Dessaint, Louis- A. et Akhrif, Ouassima.
2008.
« Time-delay compensation of a wide-area measurements-based hierarchical voltage and speed regulator ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 33, nº 2.
pp. 77-85.
Zaghbani, Imed, Khettabi, R. et Songmene, Victor.
2008.
« Base de données environnementales pour les alliages d'aluminium ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
p. 1. Chicoutimi : Les Presses de l'aluminium PRAL.
Zednik, Ricardo J., McIntyre, Paul C., Baniecki, John D., Ishii, Masatoshi et Kurihara, Kazuaki.
2008.
« Effect of strain, microstructure, and interfaces on tunability and relaxor-like dielectric behavior in barium strontium titanate thin-films ».
In 17th IEEE International Symposium on the Applications of Ferroelectrics (Santa Re, NM, USA, Feb. 23-28, 2008)
IEEE. Zednik, Ricardo Johann. 2008. « Stress effects in ferroelectric perovskite thin-films ». Thèse de doctorat. Stanford University, 108 p.
Zeng, Jun, Liu, Zhaoheng et Champliaud, Henri.
2008.
« FEM dynamic simulation and analysis of the roll-bending process for forming a conical tube ».
Journal of Materials Processing Technology, vol. 198, nº 1-3.
pp. 330-343.
Zhang, Gaixia, Sun, Shuhui, Yang, Dequan, Dodelet, Jean-Pol et Sacher, Edward.
2008.
« The surface analytical characterization of carbon fibers functionalized by H2SO4/HNO3 treatment ».
Carbon, vol. 46, nº 2.
pp. 196-205.
Zhang, Gaixia, Zhao, Yue-Feng, Zhang, Yin-Chao et Zhao, Pei-Tao.
2008.
« Lidar system for monitoring planetary boundary layer aerosol in daytime ».
Wuli Xuebao = Acta Physica Sinica, vol. 57, nº 11.
pp. 7390-7395.
Zhang, Jinfang, Dziong, Zbigniew, Kadoch, Michel et Gagnon, François.
2008.
« Receiver initiated MAC design for Ad Hoc networks based on multiuser detection ».
In Proceedings of the 5th International ICST Conference on Heterogeneous Networking for Quality, Reliability, Security and Robustness (Hong Kong, China, July 28-31, 2008)
Brussels, Belgium : Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering .
Zhang, Kaiwen, Kemme, Bettina et Denault, Alexandre.
2008.
« Persistence in massively multiplayer online games ».
In Proceedings of the 7th ACM SIGCOMM Workshop on Network and System Support for Games (NetGames'08) (Worcester, MA, USA, Oct. 21-22, 2008)
pp. 53-58.
Association for Computing Machinery (ACM).
Zhang, L., Vázquez, Carlos, Wa James, Tam et Demin, Wang.
2008.
« Zerotree data structure for 4D wavelet coefficient coding ».
In 2008 IEEE International Conference on Multimedia and Expo (Hannover, Germany, June 23-26, 2008)
pp. 737-740.
Piscataway, NJ, USA : IEEE.
Zhani, M. F., Elbiaze, H. et Kamoun, F..
2008.
« Analysis of prediction performance of training-based models using real network traffic ».
In International Symposium on Performance Evaluation of Computer and Telecommunication Systems, 2008. SPECTS 2008 (Edinburgh, Scotland, June 16-18, 2008)
pp. 472-479.
IEEE. Zokagoa, J.M. et Soulaïmani, Azzeddine. 2008. « Modeling of wave propagation over dry lands : towards a stochastic reduced order model ». Communication lors de la conférence : International Symposium Uncertainties in Hydrologic and Hydraulic Modeling (Montreal, QC, Canada, Oct. 15-17, 2008).
Zolghadri, Marc, Olivier, Claude et Bourrières, Jean-Paul.
2008.
« Close-optimal production and procurement policy for a X-network of added value using lexicographic linear goal programming ».
Computers and Industrial Engineering, vol. 54, nº 4.
pp. 821-839.
Zouidi, Abdelaziz, Fnaiech, Farhat, Al Haddad, Kamal et Rahmani, Salem.
2008.
« Adaptive linear combiners a robust neural network technique for on-line harmonic tracking ».
In 34th Annual Conference of IEEE Industrial Electronics Society (IECON) (Orlando, FL, USA, Nov. 10-13, 2008)
pp. 530-534.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau