| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Documents publiés en 2025Nombre de documents archivés : 1744.
Cheriet, Mohamed et Boucher, Jean-François et Gondim de Almeida Guimarães, Luciana et Frayret, Jean-Marc, éds.
2025.
« Accelerating the socio-ecological transition : strategies and innovations for sustainable development ».
Cham, Switzerland : Springer. 296 p.
Francis, Adel et Miresco, Edmond et Melhado, Silvio, éds.
2025.
« Advances in information technology in civil and building engineering : Proceedings of ICCCBE 2024 - volume 1: Modeling and scheduling ».
Springer. 853 p.
Francis, Adel et Miresco, Edmond et Melhado, Silvio, éds.
2025.
« Advances in information technology in civil and building engineering : Proceedings of ICCCBE 2024 - volume 3: Construction management ».
Springer. 436 p.
Francis, Adel et Miresco, Edmond et Melhado, Silvio, éds.
2025.
« Advances in information technology in civil and building engineering : Proceedings of ICCCBE 2024, volume 2, simulation and automation ».
Springer. 671 p.
Aalto, Eija M. A., Ben Asker, Hana, Ménard, Lucie, Cardoso, Walcir et Laporte, Catherine.
2025.
« Ultrasound imaging in second language research: Systematic review and thematic analysis ».
Speech Communication, vol. 175.
Abadir, Momtaz et Skonieczny, Krzysztof. 2025. « Kinematics modeling and push-pull locomotion control for articulated wheel-legged rover for planetary exploration ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Abbas, Shahroz, Sultana, Ajmery et Kaddoum, Georges.
2025.
« Quantum-safe blockchain in hyperledger fabric ».
IEEE Networking Letters, vol. 7, nº 1.
pp. 61-65.
Abbasi, Amirali, Chaallal, Omar et El-Saikaly, Georges.
2025.
« Inverse interaction of shear between steel-stirrups and externally bonded carbon fiber-reinforced polymers in shear-strengthened reinforced concrete beams: Analytical and numerical models ».
Journal of Reinforced Plastics and Composites, vol. 44, nº 21-22.
pp. 2196-2224.
Abbasi, Mahdi, Lachance, Mathieu et David, Eric.
2025.
« TEV sensor-based PD measurements with a focus on PRPD patterns and FFT Analysis ».
In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025)
Institute of Electrical and Electronics Engineers Inc..
Abbasi, Omid, Kaddoum, Georges et Yanikomeroglu, Halim.
2025.
« An AI-enabled multicarrier hybrid beamforming for HAPS with hemispherical array antenna ».
In IEEE International Conference on Communications Workshops (ICC Workshops) (Montreal, QC, Canada, June 08-12, 2025)
pp. 2009-2014.
Institute of Electrical and Electronics Engineers Inc..
Abbasi, Omid, Kaddoum, Georges et Yanikomeroglu, Halim.
2025.
« An ML-assisted OFDM-based hemispherical array antenna with hybrid beamforming for HAPS ».
IEEE Transactions on Wireless Communications, vol. 24, nº 10.
pp. 8908-8922.
Abdallah, Ammar, Abran, Alain, Qasaimeh, Munthir, Qasaimeh, Malik et Abdallah, Bashar.
2025.
« Measurement of the functional size of web analytics implementation: A COSMIC-based case study using machine learning ».
Future Internet, vol. 17, nº 7.
Abdallah, Mahmoud, Kali, Yassine, Saad, Maarouf, Fareh, Raouf et Bettayeb, Maamar.
2025.
« Wearable exoskeleton robot control using radial basis function-based fixed-time terminal sliding mode with prescribed performance ».
Asian Journal of Control.
Abdalwhab, Abdalwhab Bakheet Mohamed, Beltrame, Giovanni, Ebrahimi Kahou, Samira et St-Onge, David.
2025.
« Attention-Based Multi-Agent RL for Multi-Machine Tending Using Mobile Robots ».
AI, vol. 6, nº 10.
Abdalwhab, Abdalwhab, Beltrame, Giovanni, Kahou, Samira Ebrahimi et St-Onge, David.
2025.
« Learning multi-agent multi-machine tending by mobile robots ».
In The First MARW: Multi-Agent AI in the Real World Workshop at AAAI 2025 (Philadelphia, PA, USA, Mar. 03, 2025)
MARW.
Abdalwhab, Abdalwhab, Imran, Ali, Heydarian, Sina, Iordanova, Ivanka et St-Onge, David.
2025.
« Are open-vocabulary models ready for detection of MEP elements on construction sites ».
In Proceedings of the 42nd International Symposium on Automation and Robotics in Construction (Montreal, QC, Canada, July 28-31, 2025)
pp. 1421-1424.
International Association for Automation and Robotics in Construction.
Abdellatif, Manel, Moha, Naouel, Guéhéneuc, Yann-Gaël, Mili, Hafedh et El boussaidi, Ghizlane.
2025.
« Identifying reusable services in legacy object-oriented systems: A type-sensitive identification approach ».
IEEE Transactions on Software Engineering, vol. 51, nº 10.
pp. 2879-2899.
Abdennebi, Anes, Kara, Nadjia, Lahlou, Laaziz, Younis, Mohamed et Ould-Slimane, Hakima.
2025.
« Sec-Llama: A compact fine-tuned LLM for network intrusion detection in kubernetes clusters ».
In IEEE International Conference on Machine Learning for Communication and Networking (ICMLCN) (Barcelona, Spain, May 26-29, 2025)
Institute of Electrical and Electronics Engineers Inc.. Abida, Rayene, Hof, Lucas et Kenné, Jean-Pierre. 2025. « Automating lockout/tagout data integration in the pulp and paper industry ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Aboud, Damon G. K., Demarquette, Nicole R., Rodrigue, Denis et Kietzig, Anne-Marie.
2025.
« Considering microtexture geometry to improve micro-injection molding fidelity ».
Journal of Micromechanics and Microengineering, vol. 35, nº 6.
Aboud, Mohamed Aziz, Zangar, Nawel, Langar, Rami, Berbineau, Marion et Madec, Jerome.
2025.
« Optimizing resource allocation and scheduling towards FRMCS and GSM-R networks coexistence in railway systems ».
In Global Information Infrastructure and Networking Symposium (GIIS) (Dubai, UAE, Feb. 25-27, 2025)
Institute of Electrical and Electronics Engineers Inc.. Aboussafy, Charles, Brunetière, Noël et Guilbault, Raynald. 2025. « Development of a finite element model for solving 2D Navier-Stokes equations in deep surface textures causing cavitation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Abozaid, Omar, Selim, Bassant et Jaumard, Brigitte.
2025.
« Adaptive embedded machine learning on IoT devices: A review ».
In International Telecommunications Conference (ITC-Egypt) (Cairo, Egypt, July 28-31, 2025)
pp. 553-560.
Institute of Electrical and Electronics Engineers Inc..
Abujraiban, Ahmad, Assaf, Gabriel J. et Hmoud, Aladeen Yousef Rashid.
2025.
« The adoption of human resources analytics in construction projects in Jordan: Antecedents and consequences ».
Journal of Management Analytics, vol. 12, nº 1.
pp. 134-173.
Acar, Osman, Honkavaara, Eija, Botez, Ruxandra Mihaela et Bayburt, Deniz Çinar.
2025.
« Mechanisms and control strategies for morphing structures in quadrotors: A review and future prospects ».
Drones, vol. 9, nº 9.
Acosta-Lopez, M. et Hausler, R..
2025.
« Effect of sodium stearate and sodium palmitate concentration on the modification of CaAl-layered double hydroxides for the removal of carbaryl and imidacloprid from aqueous solutions ».
Revista Mexicana de Ingenieria Quimica, vol. 24, nº 1.
Adawy, Mohammed El, Khedr, Alaa M., Ismael, Mhadi A., Hamdy, Mohamed et Nemitallaha, Medhat A.. 2025. « Numerical simulation of combustion dynamics and NOx emissions in NH3/CH4/Air flames using integrated detailed chemistry and flamelet-generated manifold ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Addington, Jean, Liu, Lu, Braun, Amy, Auther, Andrea, Calkins, Monica E., Cornblatt, Barbara A., Corcoran, Cheryl M., Fusar-Poli, Paolo, Kerr, Melissa J., Mourgues-Codern, Catalina V., Nunez, Angela R., Oliver, Dominic, Strauss, Gregory P., Walsh, Barbara C., Alameda, Luis K., Arango, Celso, Breitborde, Nicholas J. K., Broome, Matthew R., Cadenhead, Kristin S., Carrion, Ricardo E., Chen, Eric Yu Hai, Choi, Jimmy, Coleman, Michael J., Conus, Philippe, Diaz-Caneja, Covadonga M., Dwyer, Dominic, Ellman, Lauren M., Faghankhani, Masoomeh, Gaspar, Pablo A., Gerber, Carla, Glenthøj, Louise Birkedal, Horton, Leslie E., Hui, Christy, Jacobs, Grace R., Kambeitz, Joseph, Kambeitz-Ilankovic, Lana, Keshavan, Matcheri S., Kim, Sung-Wan, Koutsouleris, Nikolaos, Kwon, Jun Soo, Langbein, Kerstin, Lewandowski, Kathryn E., Mamah, Daniel, Marcy, Patricia J., Mathalon, Daniel H., Mittal, Vijay A., Nordentoft, Merete, Pearlson, Godfrey D., Penzel, Nora, Perez, Jesus, Perkins, Diana O., Powers, Albert R., Rogers, Jack, Sabb, Fred W., Schiffman, Jason, Shah, Jai L., Silverstein, Steven M., Smesny, Stefan, Stone, William S., Thompson, Andrew, Thompson, Judy L., Upthegrove, Rachel, Verma, Swapna, Wang, Jijun, Wastler, Heather M., Wickham, Alana, Rossum, Inge Winter-van, Wolf, Daniel H., Bouix, Sylvain, Pasternak, Ofer, Kahn, Rene S., Bearden, Carrie E., Kane, John M., McGorry, Patrick D., Buccilli, Kate, Nelson, Barnaby, Shenton, Martha E., Woods, Scott W. et Yung, Alison R..
2025.
« Sample ascertainment and clinical outcome measures in the Accelerating Medicines Partnership® Schizophrenia Program ».
Schizophrenia, vol. 11, nº 1.
Addington, Jean, Liu, Lu, Chu, Monica, Jungert, Karl, Penzel, Nora, Pasternak, Ofer, Farina, Emily, Carrion, Ricardo E., Corcoran, Cheryl M., Mittal, Vijay A., Strauss, Gregory P., Yung, Alison R., Alameda, Luis, Arango, Celso, Borders, Owen, Bouix, Sylvain, Breitborde, Nicholas J. K., Broome, Matthew R., Cadenhead, Kristin S., Castillo-Passi, Rolando I., Chen, Eric Yu Hai, Choi, Jimmy, Coleman, Michael J., Conus, Philippe, Diaz-Caneja, Covadonga M., Ellman, Lauren M., Poli, Paolo Fusar, Gaspar, Pablo A., Gerber, Carla, Glenthøj, Louise Birkedal, Horton, Leslie E., Hui, Christy Lai Ming, Kambeitz, Joseph, Kambeitz-Ilankovic, Lana, Kapur, Tina, Kelly, Sinead, Kerr, Melissa J., Keshavan, Matcheri S., Kim, Minah, Kim, Sung-Wan, Koutsouleris, Nikolaos, Kwon, Jun Soo, Langbein, Kerstin, Lewandowski, Kathryn E., Mamah, Daniel, Marcy, Patricia J., Mathalon, Daniel H., Mourgues, Catalina, Nordentoft, Merete, Nunez, Angela R., Pearlson, Godfrey D., Perez, Jesus, Perkins, Diana O., Powers, Albert R., Rogers, Jack, Sabb, Fred W., Schiffman, Jason, Seitz-Holland, Johanna, Shah, Jai L., Silverstein, Steven M., Smesny, Stefan, Stone, William S., Thompson, Judy L., Upthegrove, Rachel, Verma, Swapna, Wang, Jijun, Wolf, Daniel H., Zhang, Tianhong, Addamo, Lauren, Buccilli, Kate, Dwyer, Dominic, Todd, Sophie, Cho, Youngsun T., Fontenau, Clara, Tamayo, Zailyn, Bearden, Carrie E., Kane, John M., McGorry, Patrick D., Kahn, Rene S., Shenton, Martha E., Woods, Scott W. et Calkins, Monica E..
2025.
« Baseline clinical characterization of participants in the accelerating medicines partnership schizophrenia program ».
Schizophrenia Bulletin Open, vol. 6, nº 1.
Addington, Jean, Shalev, Amy, Liu, Lu, Jahraus, Cari, Chu, Monica, Farina, Emily, Fusar Poli, Paolo, Marcy, Patricia J., Nunez, Angela R., Calkins, Monica E., Alameda, Luis, Arango, Celso, Borders, Owen, Bouix, Sylvain, Breitborde, Nicholas J. K., Broome, Matthew R., Cadenhead, Kristin S., Carrion, Ricardo E., Castillo-Passi, Rolando I., Chen, Eric Yu Hai, Choi, Jimmy, Coleman, Michael J., Conus, Philippe, Corcoran, Cheryl M., Diaz-Caneja, Covadonga M., Ellman, Lauren M., Gaspar, Pablo A., Gerber, Carla, Glenthøj, Louise Birkedal, Horton, Leslie E., Hui, Christy Lai Ming, Kambeitz, Joseph, Kambeitz-Ilankovic, Lana, Kapur, Tina, Kelly, Sinead, Kerr, Melissa J., Keshavan, Matcheri S., Kim, Minah, Kim, Sung-Wan, Koutsouleris, Nikolaos, Kwon, Jun Soo, Langbein, Kerstin, Lewandowski, Kathryn E., Mamah, Daniel, Mathalon, Daniel H., Mittal, Vijay A., Mourgues, Catalina, Nordentoft, Merete, Pasternak, Ofer, Pearlson, Godfrey D., Penzel, Nora, Perez, Jesus, Perkins, Diana O., Powers, Albert R., Rogers, Jack, Sabb, Fred W., Schiffman, Jason, Seitz-Holland, Johanna, Shah, Jai L., Silverstein, Steven M., Smesny, Stefan, Stone, William S., Strauss, Gregory P., Thompson, Judy L., Upthegrove, Rachel, Verma, Swapna, Wang, Jijun, Wolf, Daniel H., Yung, Alison R., Zhang, Tianhong, Addamo, Lauren, Buccilli, Kate, Todd, Sophie, Dwyer, Dominic, Bearden, Carrie E., Kane, John M., McGorry, Patrick D., Kahn, Rene S., Shenton, Martha E. et Woods, Scott W..
2025.
« Sample ascertainment and recruitment sources in the accelerating medicines partnership schizophrenia program ».
Schizophrenia Bulletin Open, vol. 6, nº 1.
Adelusi, Oluwaseunnla P., Boulet, Micaël et Moreau, Stéphane.
2025.
« Thermogravimetric analysis of refuse-derived fuel and its sorted fractions under torrefaction conditions ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Afkari, Parisa, Chouak, Mohamed, Cantin, Sébastien et Garnier, François.
2025.
« Evaluating bypass effects of advanced turbofan engines on contrail formation using large eddy simulations ».
Journal of Aircraft.
Afkhami, Sina, Maroufkhani, Aida, Morency, François, Momen, Gelareh et Harvey, Derek.
2025.
« Numerical investigation of aerodynamic heating influence on ice accretion process of rotating blades ».
In AIAA Aviation Forum and ASCEND (Las Vegas, NV, USA, July 21-25, 2025)
Coll. « AIAA Paper », vol. AIAA 2025-3235.
American Institute of Aeronautics and Astronautics Inc, AIAA.
Afnan, Jawata, Cai, Zhengchen, Lina, Jean-Marc, Abdallah, Chifaou, Pellegrino, Giovanni, Arcara, Giorgio, Khajehpour, Hassan, Frauscher, Birgit, Gotman, Jean et Grova, Christophe.
2025.
« Validating MEG estimated resting-state connectome with intracranial EEG ».
Network Neuroscience, vol. 9, nº 1.
pp. 421-446.
Afrasiabi, Seyedeh Negar, Naboulsi, Diala et Stanica, Razvan.
2025.
« Energy-efficient task offloading using reinforcement learning for dependent tasks in cloud-edge-device systems ».
In 28th Conference on Innovation in Clouds, Internet and Networks (ICIN) (Paris, France, Mar. 11-14, 2025)
pp. 9-16.
Institute of Electrical and Electronics Engineers Inc..
Afsharpanah, Farhad, Izadi, Masoud, Ajarostaghi, Seyed Soheil Mousavi, Poncet, Sébastien et Amiri, Leyla.
2025.
« Advancing the freezing rate in a triplex-tube ice storage unit using axial bent fins ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Agbeto, Wilfried, Coti, Camille et Reinharz, Vladimir.
2025.
« Parallel maximal common subgraphs with labels for molecular biology ».
In Parallel Processing and Applied Mathematics : 15th International Conference, PPAM 2024, Revised Selected Papers, Part I (Ostrava, Czech Republic, Sept. 08-11, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15579.
pp. 131-145.
Springer.
Aggarwal, Shubhani, Budhiraja, Ishan, Garg, Sahil, Kaddoum, Georges, Choi, Bong Jun et Hossain, M. Shamim.
2025.
« A blockchain-based secure path planning in UAVs communication network ».
Alexandria Engineering Journal, vol. 113.
pp. 451-460.
Aghababaeyan, Zohreh, Abdellatif, Manel, Briand, Lionel et Ramesh, S..
2025.
« DiffGAN: A test generation approach for differential testing of deep neural networks for image analysis ».
IEEE Transactions on Software Engineering.
Aghdam, Kosar Samadi, Ru, C.q. et Schiavone, Peter. 2025. « Reflection of plane waves from the free surface of a hard sphere-filled elastic metacomposite ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Aghigh, Negar, Anbri, Ghita El, Keivanpour, Samira, Bodkhe, Sampada, Patrick, Jason et Therriault, Daniel. 2025. « Circularity of thermal repair and recycling of 3D-printed thermoplastic composites for aerospace applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Agu, Goodluck, Davis, Matthew, Radpour, Saeidreza et Kumar, Amit. 2025. « Integrated assessment of methane reduction technologies in Canada’s oil and gas sector ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Ahmad, Redwan, Blanchard, François et Al Hadi, Richard.
2025.
« Characterization and polarization sensitivity analysis of CMOS terahertz detector ».
In Photonics North (PN) (Ottawa, ON, Canada, May 20-23, 2025)
Piscataway, NJ, USA : IEEE.
Ahmad, Redwan, Lafreniere-Greig, Jonathan, Ropagnol, Xavier et Blanchard, François.
2025.
« Terahertz polarimetric system based on polarization sensitive frequency selective surfaces ».
In Photonics North (PN) (Ottawa, ON, Canada, May 20-23, 2025)
Piscataway, NJ, USA : IEEE.
Ahmadi, Arash, Bhattacharya, Abhiroop, Gratuze, Mathieu, Cloutier, Sylvain G. et Al Hadi, Richard.
2025.
« UNet-based deep learning pathloss estimator with boundary condition input ».
In IEEE Radio and Wireless Symposium (RWS) (San Juan, PR, USA, Jan. 19-22, 2025)
pp. 9-12.
IEEE Computer Society.
Ahmadi, Arash, Bhattacharya, Abhiroop, Vaussenat, Fabrice, Cloutier, Sylvain G. et Al Hadi, Richard.
2025.
« A residual neural network approach to transmitter localization ».
IEEE Transactions on Microwave Theory and Techniques.
Ahmadi, Hanieh, Vyas, Akash, Li, Haoyang, Hogan, James et Yakout, Mostafa. 2025. « Hydrogen embrittlement of additively manufactured AlCoCrFeMo and as-cast CoCrNi high/medium entropy alloys ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Ahmadihosseini, Adel, Sasmito, Agus, Hassani, Ferri et Amiri, Leyla. 2025. « Effect of temperature and heating rate on rock thermal properties ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Aidasso, Henri, Bordeleau, Francis et Tizghadam, Ali.
2025.
« Efficient detection of intermittent job failures using few-shot learning ».
In IEEE International Conference on Software Maintenance and Evolution (ICSME) (Auckland, New Zealand, Sept. 07-12, 2025)
pp. 632-643.
Institute of Electrical and Electronics Engineers Inc..
Aïdasso, Henri, Bordeleau, Francis et Tizghadam, Ali.
2025.
« On the diagnosis of flaky job failures: Understanding and prioritizing failure categories ».
In IEEE/ACM 47th International Conference on Software Engineering: Software Engineering in Practice (ICSE-SEIP) (Ottawa, ON, Canada, Apr. 27-May 03, 2025)
pp. 192-202.
Institute of Electrical and Electronics Engineers.
Aidasso, Henri, Bordeleau, Francis et Tizghadam, Ali.
2025.
« Towards build optimization using digital twins ».
In Proceedings of the 21st International Conference on Predictive Models and Data Analytics in Software Engineering (Trondheim, Norway, June 26, 2025)
pp. 95-98.
Association for Computing Machinery, Inc.
Aïdasso, Henri, Sayagh, Mohammed et Bordeleau, Francis.
2025.
« Build optimization: A systematic literature review ».
ACM Computing Surveys, vol. 58, nº 1.
Aimaier, Nueraimaiti, Blaquière, Yves, Constantin, Nicolas et Cowan, Glenn.
2025.
« A PWM-based discrete double integral sliding mode current controller design for a class-D amplifier ».
IEEE Journal of Emerging and Selected Topics in Power Electronics.
Aissat, Sara, Beaulieu, Jonathan, Poirier, Érik, Motamedi, Ali, Gascon-Samson, Julien et Bordeleau, Francis.
2025.
« A devops framework for the systematic engineering and evolution of digital twins for built assets ».
Software and Systems Modeling.
Ajarostaghi, Seyed Soheil Mousavi, Amiri, Leyla et Poncet, Sébastien.
2025.
« Experimental verification of a local thermal non-equilibrium model for a horizontal cylindrical magnetite-based rock bed as a thermal battery ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Akbari, Soheil et Frigaard, Ian A.. 2025. « Dynamics of a dense viscoplastic fluid placed on top of a Newtonian fluid ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Akbari, Soheil et Frigaard, Ian A.. 2025. « Geothermal energy extraction from depleted oil and gas wells: Assessing British Columbia's potential ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Akberali, Amar Fayyad Kadavilparambil, Kheiri, Mojtaba et Vermeire, Brian. 2025. « Vortex induced vibration of a NACA 0012 airfoil ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Akhand, Aamer, Wu, Xiaoyu et Pirnia, Mehrdad.
2025.
« Comparing hydrogen infrastructure implementation of homes and fuel cell truck fleets ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Akhtar, Tayyab Tahir, Moreau, Stephane, Demory, Bruno et Henner, Manuel.
2025.
« Effect of rotor solidity on the aeroacoustics behaviour of automotive cooling fan module ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Akopyan, Ekaterina, Bordatchev, Evgueni et Tutunea-Fatan, O. Remus.
2025.
« Analysis of topography formation during surface structuring by laser remelting ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Akram, Mohammad Makhdoumi, Aghajani, Amir, Fontaine, Réjean, Nabki, Frédéric, Shi, Wei et Gosselin, Benoit.
2025.
« A multifunctional and flexible implantable electrooptic neural probe with embedded micropump and precise flowmeter ».
IEEE Sensors Journal, vol. 25, nº 17.
pp. 33587-33602.
Al Shboul, Ahmad, Ketabi, Mohsen, Ngai, Jenner H. L., Skaf, Daniella, Rondeau-Gagne, Simon et Izquierdo, Ricardo.
2025.
« Fully printed flexible polystyrene/graphite-based temperature sensor with excellent properties for potential smart applications ».
ACS Omega, vol. 10, nº 4.
pp. 3878-3889. Al-Absi, Zeyad, Asif, Muhammad et Isa, Mohd Hafizal Mohd. 2025. « Development of lightweight energy storage cladding panels for building applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Aladin, Sandra, Wosinska, Lena et Tremblay, Christine.
2025.
« Automated, interpretable and efficient ML models for real-world lightpaths’ quality of transmission estimation ».
IEEE Open Journal of the Communications Society, vol. 6.
pp. 9785-9801. Alakhdar, M., Hallé, S. et Vinches, L.. 2025. « Wind’s impact on thermal resistance: Challenging existing standards ». Communication lors de la conférence : Institute of Textile Science (Montréal, QC, Canada, Mar. 18-19, 2025).
Alakhdar, Mostafa, Vinches, Ludwig et Hallé, Stéphane.
2025.
« Assessing thermal resistance of a nonwoven textile under wind exposure: Challenging ISO 9920 with experimental insights ».
Journal of Industrial Textiles, vol. 55.
Alalyan, Fahdah, Awad, Mirna, Jaafar, Wael et Langar, Rami.
2025.
« Secure distributed federated learning for cyberattacks detection in B5G open radio access networks ».
IEEE Open Journal of the Communications Society, vol. 6.
pp. 3067-3081. Alawi, Ali, Saeed, Ahmed, Janaideh, Mohammad Al et Elsharqawy, Mostafa. 2025. « CFD analysis of non-uniform circumferential fin distribution for enhanced battery thermal management ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Alehdaghi, Mahdi, Josi, Arthur, Cruz, Rafael M. O., Shamsolameli, Pourya et Granger, Eric.
2025.
« Adaptive generation of privileged intermediate information for visible-infrared person re-identification ».
IEEE Transactions on Information Forensics and Security, vol. 20.
pp. 3400-3413.
Alehdaghi, Mahdi, Shamsolmoali, Pourya, Cruz, Rafael M. O. et Granger, Eric.
2025.
« Bidirectional multi-step domain generalization for visible-infrared person re-identification ».
In IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) (Tucson, AZ, USA, Feb. 26-Mar. 06, 2025)
pp. 763-773.
Institute of Electrical and Electronics Engineers Inc.. Alerci, Aldo Leonardo, Paolone, Mario et Vagnoni, Elena. 2025. « Experimental assessment of the impact of ternary units start-up strategies on multistage pump lifetime using a fracture mechanics approach ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Ali, Abid, Tariq Balghari, Suaid, Wajih Ullah Siddiqi, Muhammad et Nabki, Frederic.
2025.
« Reduction of motional resistance using piezoelectric on silicon MEMS disk arrays for ambient air applications ».
Journal of Microelectromechanical Systems, vol. 34, nº 4.
pp. 459-471. Ali, Kashif et Siddiqui, Kamran. 2025. « Impact of infiltration on the energy consumption in high-rise buildings ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Ali, Md Sujaat, Trépanier, Jean-Yves et Leclaire, Sébastien.
2025.
« A sharp interface immersed boundary approach for simplified and highly stable lattice Boltzmann method ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ali, Mohammed, Duchesne, Florent, Dahman, Ghassan, Gagnon, François et Naboulsi, Diala.
2025.
« New approaches for network topology optimization using deep reinforcement learning and graph neural network ».
IEEE Access, vol. 13.
pp. 85447-85460. Aliahmadi, Seyed Zeinab, Jabbarzadeh, Armin et Hof, Lucas. 2025. « Leveraging Industry 4.0 technologies in Canadian agri-food supply chains ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Alibazi, Ali, Kharaji, Ali Miri, Guizani, Lotfi et Hassan, Munzer.
2025.
« Evaluation of optimal alternative between LSF, CFS, and conventional steel structures ».
Structures, vol. 75.
Alidadi, Mahsa, Mohebbi, Maryam et Forouzanfar, Mohamad.
2025.
« Oscillometric blood pressure estimation via machine learning analysis of pulse transit time ».
IEEE Sensors Journal, vol. 25, nº 15.
pp. 29141-29149.
Ali-Pour, Amir et Gascon-Samson, Julien.
2025.
« SDFLMQ: A semi-decentralized federated learning framework over MQTT ».
In IEEE International Parallel and Distributed Processing Symposium Workshops (IPDPSW) (Milano, Italy, June 03-07, 2025)
pp. 1100-1107.
Institute of Electrical and Electronics Engineers Inc.. Alishahi, Marzieh, Rezaei, Yosef et Frigaard, Ian. 2025. « Experimental investigation of the dynamics of displacement flow in vertical wavy annuli across varied flow conditions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Alix, Emma, Nadeau, Sylvie, Kenné, Jean-Pierre et Tahan, Antoine. 2025. « Les défis du désassemblage à l'ère de l'électrique dans l’industrie automobile ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).
Alizadeh, Amirhosein, Zarei, Seyed Fariborz et Shateri, Mohammadhadi.
2025.
« Islanding detection for active distribution networks using WaveNet+UNet classifier ».
Protection and Control of Modern Power Systems, vol. 10, nº 5.
pp. 152-164.
Alkassas, Omar, Ny, Jerome Le et Yacout, Soumaya.
2025.
« A systematic literature review of self-healing mechanisms in cyber-physical systems: Application to robotic manipulators ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
AlKassem, Abdulrahman, Al-Haddad, Kamal, Komljenovic, Dragan et Schiffauerova, Andrea.
2025.
« The strategic selection of concentrated solar thermal power technologies in developing countries using a fuzzy decision framework ».
Energies, vol. 18, nº 8.
Alkassem, Abdulrahman, Khan, Zafar A., AlKaabi, Mishaal, Alharbi, Bader, Kazmi, Syed Ali Abbas et Al-Haddad, Kamal.
2025.
« An improved MCDM model to support smart energy management system in smart grid paradigm ».
IEEE Access, vol. 13.
pp. 102407-102420.
Alladini, Nahid, Wuthrich, Rolf et Hof, Lucas.
2025.
« Using random forest feature importance to rank environmental factors affecting PV degradation rates ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Allani, Manel, Kaddoum, Georges et Barka, Hazem.
2025.
« Enabling high-order modulation over fading channels using E2E deep learning-based transceiver optimization ».
In International Wireless Communications and Mobile Computing (IWCMC) (Abu Dhabi, UAE, May 12-16, 2025)
pp. 67-72.
Institute of Electrical and Electronics Engineers Inc.. Allard, Benoit, Rice, Ethan et Mcdonald, James. 2025. « Efficient quadrature-based source-term evaluation for the Gaussian moment model applied to multiphase flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Allard, Laurent et Snaiki, Reda.
2025.
« Buffeting-induced fatigue damage assessment of a long-span bridge under a changing climate scenario ».
Journal of Bridge Engineering, vol. 30, nº 3.
Allott, Kelly, Yassin, Walid, Alameda, Luis, Billah, Tashrif, Borders, Owen, Buccilli, Kate, Carrión, Ricardo E., Castillo-Passi, Rolando I., Cho, Kang Ik K., Chin, Kota, Coleman, Michael J., Colton, Beau-Luke, Corral, Sebastián, Dwyer, Dominic, Gundersen, Kristina Ballestad, Gur, Ruben C., Hoftman, Gil D., Jacobs, Grace R., Kelly, Sinead, Lewandowski, Kathryn E., Marcy, Patricia J., Matneja, Priya, McLaughlin, Danielle, Nunez, Angela R., Parsa, Setari, Penzel, Nora, Ray, Susan, Reinen, Jenna M., Ruparel, Kosha, Sand, Michael S., Santorelli, Gennarina, Seitz-Holland, Johanna, Spark, Jessica, Tamayo, Zailyn, Thompson, Andrew, Tod, Sophie, Wannan, Cassandra M. J., Wickham, Alana, Wood, Stephen J., Zoupou, Eirini, Addington, Jean, Anticevic, Alan, Arango, Celso, Breitborde, Nicholas J. K., Broome, Matthew R., Cadenhead, Kristin S., Calkins, Monica E., Chen, Eric Yu Hai, Choi, Jimmy, Conus, Philippe, Corcoran, Cheryl M., Cornblatt, Barbara A., Ellman, Lauren M., Fusar-Poli, Paolo, Gaspar, Pablo A., Gerber, Carla, Glenthøj, Louise Birkedal, Horton, Leslie E., Hui, Christy Lai Ming, Kambeitz, Joseph, Kambeitz-Ilankovic, Lana, Keshavan, Matcheri, Kim, Sung-Wan, Koutsouleris, Nikolaos, Kwon, Jun Soo, Langbein, Kerstin, Mamah, Daniel, Diaz-Caneja, Covadonga M., Mathalon, Daniel H., Mittal, Vijay A., Nordentoft, Merete, Pearlson, Godfrey D., Perkins, Diana O., Perez, Jesus, Powers, Albert R., Rogers, Jack, Sabb, Fred W., Schiffman, Jason, Shah, Jai L., Silverstein, Steven M., Smesny, Stefan, Strauss, Gregory P., Thompson, Judy L., Upthegrove, Rachel, Verma, Swapna K., Wang, Jijun, Wolf, Daniel H., Pasternak, Ofer, Bouix, Sylvain, McGorry, Patrick D., Kane, John M., Kahn, Rene S., Bearden, Carrie E., Shenton, Martha E., Woods, Scott W., Nelson, Barnaby et Stone, William S..
2025.
« Cognitive assessment in the Accelerating Medicines Partnership® Schizophrenia Program: harmonization priorities and strategies in a diverse international sample ».
Schizophrenia, vol. 11, nº 1.
Alshabab, Somar Shekh, Wu, Zhao et Bamer, Franz. 2025. « Mechanically informed identification of shear instabilities in disordered covalent network glass ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Amar, Fouzia, April, Alain et Abran, Alain.
2025.
« Integrating unstructured EHR data using an FHIR-based system: A case study with problem list data and an FHIR IPS model ».
Electronics, vol. 14, nº 21.
Amar, Luc. 2025. « Robust design of case hardening depth to optimize rolling contact fatigue performance: Numerical methodology and theoretical applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Amarloo, Mahdiyar, Darbandi, Masoud et Schneider, Gerry.
2025.
« Evaluating the influences of complementary corrections/adjustments on improving the accuracy of BEMT in large-scale wind turbine power prediction ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Amice, Gwenn et Tremblay, Christine. 2025. « Short course SC528 : Hands-on fiber optic OFCnet course : Practical fiber optic network testing in a realistic network environment ». Communication lors de la conférence : Optical fiber communication conference (OFC 2025) (Los Angeles, CA, USA, Mar. 31, 2025). Amirsoleymani, Amirhossein, Huang, Yunqiao, Anyanwu, Ikechukwu, Shahgaldi, Samaneh et Li, Xianguo. 2025. « A comprehensive numerical study of obstacle-integrated flow field header design for proton exchange membrane fuel cells ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Ammar, H. R., Samuel, E., Samuel, F. H., Elsharkawi, E., Doty, H. W. et Songmene, V..
2025.
« Effect of Be, Sr, Mn, Mg, Cr and Si Addition on neutralization and fragmentation of β-Al5SiFe Phase in Al-(6-10) %Si Alloys ».
International Journal of Metalcasting.
Ammar, Syed Muhammad, Duan, Xili et Naterer, Greg F.. 2025. « Experimental investigation of crater dynamics and jet evolution during droplet impact on a liquid pool ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Amouzou, Koffi Novignon, Alonso Romero, Alberto, Sengupta, Dipankar, Zimmermann, Camila Aparecida, Kumar, Aashutosh, Gravel, Normand, Lina, Jean-Marc, Daxhelet, Xavier et Ung, Bora.
2025.
« Porous-cladding polydimethylsiloxane optical waveguide for biomedical pressure sensing applications ».
Sensors, vol. 25, nº 14.
Amrhar, Abdessamad, Bursucianu, Victor, Gagne, Jean-Marc et Landry, René.
2025.
« Flight test performance of an RFSoC based direct RF FMCW radio altimeter ».
In Integrated Communications, Navigation and Surveillance Conference (ICNS) (Brussels, Belgium, Apr. 08-10, 2025)
Institute of Electrical and Electronics Engineers Inc..
Andleeb, Ifrah, Hussain, Bilal Zahid, Joncas, Julie, Barchi, Soraya, Roy-Beaudry, Marjolaine, Parent, Stefan, Grimard, Guy, Labelle, Hubert et Duong, Luc.
2025.
« Automatic evaluation of bone age using hand radiographs and pancorporal radiographs in adolescent idiopathic scoliosis ».
Diagnostics, vol. 15, nº 4.
Andrade, Gino J.a. De, Groulx, Dominic et Silva, W.b. Da.
2025.
« Estimation of arc efficiency in arc welding using temperature measurements ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Andrianantara, Rojo Princy, Ghazi, Georges et Botez, Ruxandra Mihaela.
2025.
« Flying qualities assessment for nonlinear adaptive control validation on the Cessna Citation X longitudinal and lateral dynamics ».
In AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum (Orlando, FL, USA, Jan. 06-10, 2025)
Coll. « AIAA Paper », vol. AIAA 2025-1826.
American Institute of Aeronautics and Astronautics Inc, AIAA.
Anglehart-Nunes, Jessy et Glaus, Mathias.
2025.
« Environmental performance assessment of a decentralized network of recyclable waste sorting facilities: Case study in Montreal ».
Recycling, vol. 10, nº 2.
Annunziata, Rémy, Bonne, Nicolas et Garnier, François.
2025.
« Numerical investigation of engine position effects on contrail formation and evolution in the near-field of a realistic aircraft configuration ».
Aerospace Science and Technology, vol. 167.
Antoine, C., Pierre, B., Guillaume, P. et Alain, L..
2025.
« Creating schematic representation of corrosion using CGAN and ultrasonic imaging ».
In SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025)
Coll. « Proceedings of SPIE », vol. 13438.
SPIE.
Antoun, Joseph, Jaafar, Wael et Langar, Rami.
2025.
« Cost-effective power management for Green Mobile Base Stations ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12 ,2025)
pp. 6462-6467.
Institute of Electrical and Electronics Engineers Inc.. Anwar, Shams, Qamar, Sanaullah, Bashir, Shahzad, Shahgaldi, Samaneh et Li, Xianguo. 2025. « Influence of pH and saline exposure on Zn-Ni coating degradation: Insights from numerical simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Anyanwu, Ikechukwu, Amirsoleymani, Amirhossein, Shahgaldi, Samaneh et Li, Xianguo. 2025. « Impact of hybrid flow channels on transport of reactants and water in proton exchange membrane fuel cells ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Appia, Christian et Songmene, Victor.
2025.
« Reduction of fine and ultrafine particles by water: Application to the machining of dusty materials ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Arafeh, Mohamad, Hammoud, Ahmad, Guizani, Mohsen, Mourad, Azzam, Otrok, Hadi, Ould-Slimane, Hakima, Dziong, Zbignew, Wang, Chang-Dong et Wu, Di.
2025.
« WFSL: Warmup-Based Federated Sequential Learning ».
IEEE Internet of Things Journal, vol. 12, nº 2.
pp. 1974-1989.
Arafeh, Mohamad, Wazzeh, Mohamad, Sami, Hani, Ould-Slimane, Hakima, Talhi, Chamseddine, Mourad, Azzam et Otrok, Hadi.
2025.
« Efficient privacy-preserving ML for IoT: Cluster-based split federated learning scheme for non-IID data ».
Journal of Network and Computer Applications, vol. 236.
Arar, Ahmad J., Poirier, Erik et Staub-French, Sheryl.
2025.
« A capability maturity model for integrated project delivery ».
Buildings, vol. 15, nº 10.
Arar, Ahmad J., Poirier, Erik et Staub-French, Sheryl.
2025.
« A research and development framework for integrated project delivery ».
Construction Management and Economics, vol. 43, nº 2.
pp. 85-112.
Arasteh, Hossein, Kalivogui, Siba, Merabtine, Abdelatif, Maref, Wahid, Zhang, Kun, Durand, Sullivan, Turcotte, Patrick, Rousse, Daniel, Ilinca, Adrian, Haillot, Didier et Izquierdo, Ricardo.
2025.
« Decarbonization strategies for Northern Quebec: Enhancing building efficiency and integrating renewable energy in off-grid indigenous communities ».
Energies, vol. 18, nº 16.
Arasteh, Hossein, Maref, Wahid et Saber, Hamed H..
2025.
« Building energy efficiency improvement with solid-solid phase change materials integrated into glazing systems ».
In Multiphysics and Multiscale Building Physics : Proceedings of the 9th International Building Physics Conference (IBPC 2024) Volume 1: Moisture and Materials (Toronto, ON, Canada, July 25-27, 2024)
Coll. « Lecture notes in civil engineering », vol. 552.
pp. 412-417.
Berlin, Germany : Springer Nature.
Arasteh, Hossein, Maref, Wahid et Saber, Hamed H..
2025.
« Enhancing energy performance of glazing systems using solid-solid phase change materials ».
Journal of Building Physics.
Ardakani, Mohsen Masoomi et Yang, Jianming.
2025.
« Data-driven feature selection for prediction of wind turbine vibrations ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ardisson, Aurélien, Beauséjour, Marie-Hélène, Wagnac, Eric et Bulla, Marian. 2025. « Enhanced Hill-type model for muscle contraction simulation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Areal, Cassandra C., Lemmetti, Nicolas, Leduc, Tanya, Bourguignon, Clément, Lina, Jean-Marc, Bélanger-Nelson, Erika et Mongrain, Valérie.
2025.
« The absence of Neuroligin-1 shapes wake/sleep architecture, rhythmic and arrhythmic activities of the electrocorticogram in female mice ».
Molecular Brain, vol. 18, nº 1.
Arefi, S.m.amin et Grecov, Dana. 2025. « Computational study of turbulent gas-powder mixture flow in a novel pneumatic hemostatic delivery system ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Arias-Hernandez, Jesus Alejandro, Kwon, Sun Yong et Moosavi-Khoonsari, Elmira.
2025.
« Application of polyhedron model to predict heat capacity of mixed oxides ».
Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, vol. 89.
Armstrong, William, Arsenault, Richard, Martel, Jean-Luc, Troin, Magali, Dion, Patrice, Sabzipour, Behmard, Brissette, François et Mai, Juliane.
2025.
« Improving multi-model ensemble streamflow forecasts by combining lumped, distributed and deep learning hydrological models ».
Hydrological Sciences Journal, vol. 70, nº 7.
pp. 1091-1108.
Arnould, Cloé et Poirier, Erik.
2025.
« A design thinking approach for BIM acceptance based on use case identification in a manufacturer company ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 193-208.
Springer.
Arrieta, Manuel de Jesus Gurrola et Botez, Ruxandra M..
2025.
« Cycle model matching of a regional aircraft engine using high-fidelity flight simulator data ».
Proceedings of the Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering.
Arumughan, Jyothis et Degroot, Christopher T. 2025. « Assessing turbulence models for multiphase mixture model simulations of hydrocyclones using OpenFOAM ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Arzjani, Danial, Carret, Jean-Claude, Bilodeau, Jean-Pascal et Cardona, Diego Ramirez.
2025.
« Evaluating the structural performance of eRoad pavements: Impact of inductive charging coils on mechanical behaviour ».
[Article de conférence]. Road Materials and Pavement Design, vol. 26, nº suppl. 1.
pp. 55-71.
Arzjani, Danial, Carret, Jean-Claude, Bilodeau, Jean-Pascal, Griggio, Amélie, Proteau, Marc, Koren, Itai et Cardona, Diego Ramirez.
2025.
« Laboratory study on an eRoad pavement structure utilizing accelerated loading tests ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 52, nº 7.
Asgari, Ehsan, Saeedi, Mohammad, Dastgerdi, Jairan Nafar et Nasiri, Ali.
2025.
« Numerical analysis of heat-generating terms in the energy equation for wire arc additive manufacturing ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Asgari, Milad, Bonev, Ilian A. et Gosselin, Clément.
2025.
« Singularities of ABB's YuMi 7-DOF robot arm ».
Mechanism and Machine Theory, vol. 205.
Asgari-Targhi, Ameneh, Yao, Beier, Brown, Lisa, Garcia, Suzanne, Nagendra, Arundati, Chin, Kota, Billah, Tashrif, Penzel, Nora, John, Omar, Prunier, Nicholas, Veale, Simone, Kotler, Elana, Jacobs, Grace R., Zhan, Ming, Coleman, Michael J., Bouix, Sylvain, Pasternak, Ofer, Cecci, Guillermo, Baker, Justin T., Mathalon, Daniel H., Kelly, Sinead M., Corcoran, Cheryl M., Reichenberg, Abraham, Winter-van Rossum, Inge, Kubicki, Marek, Spark, Jessica, Dwyer, Dominic, Arango, Celso, Fusar-Poli, Paolo, Calkins, Monica, Shah, Jai L., Mittal, Vijay, Thompson, Andrew, McGorry, Patrick D., Kahn, René S., Kane, John M., Bearden, Carrie E., Woods, Scott W., Nelson, Barnaby, Shenton, Martha E., Staglin, Brandon, Larrauri, Carlos A., Lewandowski, Kathryn Eve et Kapur, Tina.
2025.
« Bridging science and hope: Integrating and communicating lived experience in Accelerating Medicines Partnership® Schizophrenia Program ».
Schizophrenia, vol. 11, nº 1.
Asghari, Mohammad et Jabbarzadeh, Armin.
2025.
« A multi-stage stochastic programming approach for overhaul and supply chain planning of modular physical assets: Case study ».
Operational Research, vol. 26, nº 1.
Ashraf, Hasan, Singh, Shalini et Qureshi, Ahmed Jawad. 2025. « Optimizing process parameters for VANCAR-O deposition in wire arc additive manufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Askarizadeh, Mohammad, Morsali, Alireza et Nguyen, Kim Khoa.
2025.
« Resource-constrained multisource instance-based transfer learning ».
IEEE Transactions on Neural Networks and Learning Systems, vol. 36, nº 1.
pp. 1029-1043.
Askarizadeh, Mohammad, Morsali, Alireza, Tofigh, Sadegh et Nguyen, Kim Khoa.
2025.
« Convex-concave programming: An effective alternative for optimizing shallow neural networks ».
IEEE Transactions on Emerging Topics in Computational Intelligence, vol. 9, nº 4.
pp. 2894-2907.
Assi, Rola, Mazloom, Shahabaldin et Abouda, Amine.
2025.
« Effect of nonlinearity on seismic response of nonstructural components in a code-conforming RC shear wall building ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 52, nº 1.
Assid, M., Gharbi, A. et Pellerin, R..
2025.
« Machine learning-based dynamic production planning and control in unreliable manufacturing systems with supply disruptions ».
International Journal of Production Research.
Assid, Morad, Gharbi, Ali, Hajji, Adnène et Robert, Pellerin.
2025.
« Coordinated production and opportunistic-preventive maintenance control policy in deteriorating hybrid manufacturing-remanufacturing systems ».
Flexible Services and Manufacturing Journal.
Assid, Morad, Gharbi, Ali et Pellerin, Robert.
2025.
« An integrated control policy for cost and waste minimization in unreliable hybrid manufacturing-remanufacturing systems ».
Journal of Industrial and Production Engineering.
Ataei, Farhang et Boton, Conrad.
2025.
« A structured approach to 4D printing for rapid prototyping in construction ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023, Volume 4 : Construction Track (Moncton, NB, Canada, May 24-27, 2023)
Coll. « Lecture notes in civil engineering », vol. 498.
pp. 125-136.
Springer.
Atanalian, Sandy, Sebaaly, Fadia, Zgheib, Rawad et Al-Haddad, Kamal.
2025.
« Z Packed U-cell modular multilevel converter for STATCOM applications ».
IEEE Access, vol. 13.
pp. 78795-78807.
Atiq Ur Rehman, Muhammad, Chaabane, Amin et Khan, Sharfuddin Ahmed.
2025.
« A novel decision support system for integrating supply chain and project management decisions to optimize multiple project performance: A case study in building renovation ».
International Journal of Construction Management.
Atiq-Ur-Rehman, Muhammad, Chaabane, Amin et Khan, Sharfuddin Ahmed.
2025.
« Advanced planning with supplier selection for modular construction supply chain performance improvement ».
Journal of Modelling in Management.
Attipoe, David, Moulla, Donatien Koulla, Mnkandla, Ernest et Abran, Alain.
2025.
« Predicting residential energy consumption in South Africa using ensemble models ».
Applied Computational Intelligence and Soft Computing, vol. 2025, nº 1.
Attipoe, David, Moulla, Donatien Koulla, Thottempudi, Sree Ganesh, Akinyemi, Lateef Adesola, Agbo-Ajala, Jelil Olatunbosun, Ekundayo, Olufisayo, Mnkandla, Ernest et Abran, Alain.
2025.
« Evaluating the scalability and suitability of deep learning models for energy consumption forecasting in smart homes ».
In Proceedings of Tenth International Congress on Information and Communication Technology, ICICT, Volume 5 (London, England, Feb. 18-21, 2025)
Coll. « Lecture Notes in Networks and Systems », vol. 1444.
pp. 583-598.
Springer.
Aubertin, Jonathan D..
2025.
« Enhanced scan registration through recursive ICP and bias filtering for geoengineering applications ».
Remote Sensing in Earth Systems Sciences, vol. 8, nº 2.
pp. 718-732. Audefroy, Clément, Olivier, Mathieu, Houde, Sébastien et Gosselin, Frédérick. 2025. « Evaluating flow-induced damping by solving a perturbation flutter problem ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Aujla, Gagangeet Singh, Jindal, Anish, Kaur, Kuljeet, Garg, Sahil, Chaudhary, Rajat, Sun, Hongjian et Kumar, Neeraj.
2025.
« COPS: Controller placement in next-generation software defined edge-cloud networks ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 2168-2173.
Institute of Electrical and Electronics Engineers Inc..
Austernaud, Y., Novelli, M., Grosdidier, T. et Bocher, P..
2025.
« Enhancing fatigue performance of austenitic stainless steel via warm surface severe plastic deformation using surface mechanical attrition treatment ».
International Journal of Fatigue, vol. 201.
Austernaud, Y., Novelli, M., Kauffmann, T. H., Bocher, P. et Grosdidier, T..
2025.
« Surface contamination induced by warm severe surface peening using 100C6 steel and ZrO2 shots ».
Materials Letters: X, vol. 26.
Austernaud, Yann, Novelli, Marc, Bocher, Philippe et Grosdidier, Thierry.
2025.
« Effect of shot peening temperature on the microstructure induced by surface severe plastic deformation on an austenitic stainless steel ».
Journal of Materials Processing Technology, vol. 339.
Avelino, Juscimara G., Cavalcanti, George D. C. et Cruz, Rafael M. O..
2025.
« Imbalanced regression pipeline recommendation ».
Machine Learning, vol. 114, nº 6.
Avikpe, Ferdinand, Alibhai, Faisal, Torres, David Romero, Laflamme, Michael et Amon, Cristina. 2025. « A validated in silico model for predicting human pluripotent stem cell proliferation dynamics in a vertical wheel bioreactor ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Ayask, Ali Arabi, Ménard, Pierre André, Croteau, Claire et Ratté, Sylvie. 2025. « Preliminary automated analysis of emotions in individuals with aphasia in natural conversations: An ongoing investigation ». Affiche présentée lors de la conférence : Nordic Aphasia Conference (Uppsala, Sweden, June 09-11, 2025).
Ayobo, Damos A., Jaafar, Wael et Langar, Rami.
2025.
« Monitoring powerlines and vegetation risks: From conventional methods to digital twin ».
IEEE Access, vol. 13.
pp. 181783-181798.
Ayobo-Abongo, Damos, Jaafar, Wael et Langar, Rami.
2025.
« Generative AI-assisted digital twin for power asset management ».
IEEE Communications Magazine.
Ayyagari, Ravi Sastri. 2025. « Orthotropic tetrakaidecahedral foams: A micromechanics-based study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Azad, Amirreza, Dolatabadi, Ali, Antonini, Carlo et Jadidi, Mehdi. 2025. « Multiscale modeling of bubble evolution on gas-evolving electrodes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Azad, Ehsan, Sarvestani, Hamidreza Yazdani, Ashrafi, Behnam, Shadmehri, Farjad et Hojjati, Mehdi. 2025. « Mimicking nature: Improving ceramic composite performance with micro-patterned interfaces ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Azad, Saeed, Al Shboul, Ahmad, Lacroix, Christian, Izquierdo, Ricardo, Ménard, David, Olivier, Martin, Guerrero, Carlos Villalba et Ung, Bora.
2025.
« Biomimetic synthesis of the plasmodium falciparum malaria pigment and engineering of its physical attributes via pH control ».
Biomedical Materials & Devices, vol. 3, nº 1.
pp. 638-645. Azarhazin, Soorena, Kozinski, Janusz et Tarokh, Ali. 2025. « Investigation of pipe flattening on internal turbulent heat transfer: A large eddy simulation (LES) study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Azin, Hugo, Mungyeko Bisulandu, Baby-Jean Robert, Ilinca, Adrian et Rousse, Daniel R..
2025.
« Decarbonizing arctic mining operations with wind-hydrogen systems: Case study of Raglan Mine ».
Processes, vol. 13, nº 10.
Azzaz, Riadh, Jahazi, Mohammad, Ebrahimi Kahou, Samira et Moosavi-Khoonsari, Elmira.
2025.
« Prediction of final phosphorus content of steel in a scrap-based electric arc furnace using artificial neural networks ».
Metals, vol. 15, nº 1.
Babin, William, Joubair, Ahmed et Tahan, Souheil-Antoine.
2025.
« Experimental repeatability assessment of a metrology-assisted robotic assembly system using iGPS tracking ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Badaloo, Rajiv et Cooper, Thomas. 2025. « A low-cost high-flux solar simulator based on xenon searchlight technology ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Baghemoortini, Elham Fallah, Shishebori, Davood, Jahangoshai Rezaee, Mustafa et Jabbarzadeh, Armin.
2025.
« Enhancing fuzzy cognitive map convergence through supervised and unsupervised learning algorithms: A case study of operational risk assessment in power distribution networks ».
Engineering Applications of Artificial Intelligence, vol. 161, nº Part B.
Bahramitalab, Arash, Afkhami, Sina, Morency, François, Momen, Gelareh et Harvey, Derek. 2025. « Impact of aerodynamic heating on the characteristics of accreted ice on a rotating blade ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bahri, Ali, Yazdanpanah, Moslem, Dastani, Sahar, Noori, Mehrdad, Hakim, Gustavo Adolfo Vargas, Osowiechi, David, Beizaee, Farzad, Ben Ayed, Ismail et Desrosiers, Christian.
2025.
« SMART-PC: Skeletal model adaptation for robust test-time training in point clouds ».
In 42nd International Conference on Machine Learning (Vancouver, BC, Canada, July 13-19, 2025)
Coll. « Proceedings of Machine Learning Research », vol. 267.
pp. 2442-2457.
ML Research Press.
Bahri, Ali, Yazdanpanah, Moslem, Noori, Mehrdad, Cheraghalikhani, Milad, Hakim, Gustavo Adolfo Vargas, Osowiechi, David, Beizaee, Farzad, Ben Ayed, Ismail et Desrosiers, Christian.
2025.
« GeoMask3D: Geometrically informed mask selection for self-supervised point cloud learning in 3D ».
Transactions on Machine Learning Research.
Bahri, Ali, Yazdanpanah, Moslem, Noori, Mehrdad, Dastani, Sahar, Cheraghalikhani, Milad, Osowiechi, David, Beizaee, Farzad, Hakim, Gustavo A. Vargas, Ben Ayed, Ismail et Desrosiers, Christian.
2025.
« Test-time adaptation in point clouds: Leveraging sampling variation with weight averaging ».
In IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) (Tucson, AZ, USA, Feb. 26-Mar. 06, 2025)
pp. 266-275.
Institute of Electrical and Electronics Engineers Inc.. Bailly, Nicolas et Arnoux, Pierre-Jean. 2025. « From human models to virtual trauma understanding, prevention and management ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bailly, Nicolas, Schäuble, Andreas, Guesneau, Marianne, Wei, Wei et Petit, Yvan.
2025.
« Assessing bicycle helmet protection for head and neck in E-scooter falls ».
Traffic Injury Prevention.
Bailly, Nicolas, Wagnac, Eric et Petit, Yvan.
2025.
« Regional mechanical properties of spinal cord gray and white matter in transverse section ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 163.
Bakhtiar, Nazanin Karimi, Proulx, Hélène, Wingert, Loïc et Hallé, Stéphane. 2025. « Spatio-temporal analysis of aerosol transport in a human-scale room: An experimental and computational study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bakhtiari, Mohammad, Bakhshandeh, Ehsan, Jafari, Reza et Momen, Gelareh.
2025.
« Enhancing anti-icing efficacy in hybrid polyurethane coatings: Evaluating the significance of molecular weight, chemical structure, and content of PEG/PDMS ».
Applied Surface Science, vol. 684.
Bakhtiari, Mohammad, Momen, Gelareh et Jafari, Reza.
2025.
« Photothermal polyurethane coatings with functionalized nanoparticles and quasi-liquid layer for enhanced anti-icing and solar-assisted de-icing ».
Solar Energy, vol. 300.
Bandeira de Souza, Ziani Santana, Araújo do Nascimento, Pedro Lucas, Samara, Mazen, David, Éric, Macedo Fechine, Guilhermino Jose, Alves da Motta Sobrinho, Mauricio et Demarquette, Nicole Raymonde.
2025.
« Influence of graphene functionalization on the curing kinetics, dynamical mechanical properties and morphology of epoxy nanocomposites ».
Polymer, vol. 320.
Banerjee, Gairik et Liu, Kefu. 2025. « Development of a pendulum-based device to harvest energy from large low-frequency oscillations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Banerjee, Utsab, Misra, Sirshendu et Mitra, Sushanta. 2025. « Magnet-assisted control and release of liquid-wrapped magneto-responsive hydrogels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Banijamali, Seyed Masoud, Ilinca, Adrian, Afrouzi, Ali Alizadeh et Rousse, Daniel R..
2025.
« Optimizing hydrogen liquefaction efficiency through waste heat recovery: A comparative study of three process configurations ».
Processes, vol. 13, nº 5.
Barabi, Aidin, Deschênes, Pierre-Antony, Lacasse, Robert, Thibault, Denis et Brochu, Myriam. 2025. « Kinetics of crack propagation in hydraulic turbine runner material exposed to river water ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Barboza, Eduardo V. L., Almeida, Paulo R. Lisboa de, Britto, Alceu de Souza, Sabourin, Robert et Cruz, Rafael M. O..
2025.
« IncA-DES: An incremental and adaptive dynamic ensemble selection approach using online K-d tree neighborhood search for data streams with concept drift ».
Information Fusion, vol. 123.
Barka, Hazem, Alam, Md Sahabul, Kaddoum, Georges, Au, Minh et Iqbal, Naveed.
2025.
« Performance analysis of rate-splitting multiple access technique in impulsive noise environments ».
IEEE Wireless Communications Letters, vol. 14, nº 3.
pp. 871-875.
Barka, Hazem, Kaddoum, Georges, Alam, Md Sahabul, Selim, Bassant et Au, Minh.
2025.
« Beyond Shannon capacity: Deep semantic communication for enhanced performance in impulsive noise environments ».
IEEE Wireless Communications Letters, vol. 14, nº 1.
pp. 148-152.
Barka, Hazem, Kaddoum, Georges, Bennis, Mehdi, Alam, Md Sahabul et Au, Minh.
2025.
« Sequence spreading-based semantic communication under high RF interference ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 4589-4594.
Institute of Electrical and Electronics Engineers Inc..
Barmoudeh, Farid, Salemnia, Ahmad, Davari, Masoud et Al-Haddad, Kamal.
2025.
« A modular hybrid switched-capacitor cross-switched asymmetrical multilevel inverter with low-stress voltage and high-power quality utilizing the nearest level control switching technique ».
IEEE Transactions on Industrial Electronics.
Barua, Niloy, Pardo, Rubert Martín et Nedi, Jovan. 2025. « Jetting and wave formation in a periodic cylindrical obstacle array under impulsive submersion ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bashir, Musavir, Botez, Ruxandra M., Wong, Tony, Salinas, Manuel F. et Negahban, Mir Hossein.
2025.
« Aerodynamic optimization of adaptive wing configurations with different leading-edge shapes ».
In AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum (Orlando, FL, USA, Jan. 06-10, 2025)
Coll. « AIAA Paper », vol. AIAA 2025-1650.
American Institute of Aeronautics and Astronautics Inc, AIAA.
Basit, Abdul, Kaddoum, Georges et Mourad, Azzam.
2025.
« Learning resilient distributed channel access policies in V2I networks under intelligent jamming ».
IEEE Internet of Things Journal, vol. 12, nº 13.
pp. 24570-24585.
Basit, Abdul, Naeem, Faisal et Kaddoum, Georges.
2025.
« Multi-agent reinforcement learning for resilient channel access in smart grid networks under intelligent adversarial interference ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 6203-6208.
Institute of Electrical and Electronics Engineers Inc..
Basit, Abdul, Rahim, Muddasir, Do, Tri Nhu, Adam, Nadir et Kaddoum, Georges.
2025.
« DRL-based maximization of the sum cross-layer achievable rate for networks under jamming ».
IEEE Transactions on Network and Service Management, vol. 22, nº 2.
pp. 1295-1313. Beaudoin, Étienne J., Zednik, Ricardo J et Demarquette, Nicole R. 2025. « Impact of polydispersity on polymer solutions and electrospun nanofibers ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Beauséjour, Marie-Hélène, Bailly, Nicolas, Wei, Wei, Llari, Maxime, Evin, Morgane, Panichelli, Paolo et Arnoux, Pierre-Jean.
2025.
« Neck brace design and fit are linked to head mobility ».
Sports Engineering, vol. 28, nº 1.
Beauséjour, Marie-Hélène, Bailly, Nicolas, Wei, Wei, Troude, Lucas, Panichelli, Paolo et Arnoux, Pierre-Jean.
2025.
« Head response and cervical spine injuries in an oblique lateral helmeted head impact ».
Annals of Biomedical Engineering, vol. 53, nº 5.
pp. 1180-1191.
Begoug, Mahi et Ouni, Ali.
2025.
« How do infrastructure-as-code practitioners update their provider dependencies? An empirical study on the AWS provider ».
In Service-Oriented Computing : 22nd International Conference, ICSOC 2024, Proceedings, Part II (Tunis, Tunisia, Dec. 03-06, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15405.
pp. 373-388.
Springer.
Begoug, Mahi, Ouni, Ali et Chouchen, Moataz.
2025.
« How do Infrastructure-as-Code practitioners update their dependencies? An empirical study on terraform module updates ».
In IEEE/ACM 22nd International Conference on Mining Software Repositories (MSR) (Ottawa, ON, Canada, Apr. 28-29, 2025)
pp. 642-653.
Institute of Electrical and Electronics Engineers Inc..
Begoug, Mahi, Ouni, Ali et Khelifi, Jasem.
2025.
« Understanding AWS provider dependencies updates in Infrastructure-as-Code: Empirical study, taxonomy, and insights ».
IEEE Transactions on Services Computing.
Behravesh, Amir H., Tariq, Asra et Rizvi, Ghaus. 2025. « Resin properties and part size interrelationships in computed tomography-based volumetric additive manufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Beitollahi, Armin, Alamdari, Houshang et Taghavi, Seyed Mohammad.
2025.
« Capillary flow of highly viscous shear-thinning fluids into irregular microchannels ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Beizaee, Farzad, Lodygensky, Gregory A., Adamson, Chris L., Thompson, Deanne K., Cheong, Jeanie L. Y., Spittle, Alicia J., Anderson, Peter J., Desrosiers, Christian et Dolz, Jose.
2025.
« Harmonizing flows: Leveraging normalizing flows for unsupervised and source-free MRI harmonization ».
Medical Image Analysis, vol. 101.
Beizaee, Farzad, Lodygensky, Gregory A., Desrosiers, Christian et Dolz, Jose.
2025.
« Correcting deviations from normality: A reformulated diffusion model for multi-class unsupervised anomaly detection ».
In IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR) (Nashville, TN, USA, June 10-17, 2025)
pp. 19088-19097.
IEEE Computer Society.
Beji, Fatma, Ferreira, William de Paula, Pivotto Dabat, Isabelle et Matias, Vitor.
2025.
« CAVE automatic virtual environment technology: A patent analysis ».
[Article de conférence]. Engineering Proceedings, vol. 89, nº 1.
Bekoute, Luisa Bessom, Brochot, Clothilde, Bahloul, Ali, Halle, Stéphane et Hof, Lucas A.. 2025. « Conception d'un banc de test pour la mesure de l'efficacité d'une visière innovante pour la réduction des aérosols à la source ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Belal, Atif, Meethal, Akhil, Romero, Francisco Perdigon, Pedersoli, Marco et Granger, Eric.
2025.
« Attention-based class-conditioned alignment for multi-source domain adaptation of object detectors ».
In IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) (Tucson, AZ, USA, Feb. 26-Mar. 06, 2025)
pp. 8566-8575.
Institute of Electrical and Electronics Engineers Inc.. Bélanger, Pierre et Latete, Thibault (inventeurs) 21 janvier 2025. « Ultrasonic testing for defect detection ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,203,897.
Belharbi, Soufiane, Murtaza, Shakeeb, Pedersoli, Marco, Ben Ayed, Ismail, McCaffrey, Luke et Granger, Eric.
2025.
« CoLo-CAM: Class activation mapping for object co-localization in weakly-labeled unconstrained videos ».
Pattern Recognition, vol. 162.
Bellal, Zouhir, Lahlou, Laaziz, Kara, Nadjia et Khayat, Ibtissam El.
2025.
« GAS: DVFS-driven energy efficiency approach for latency-guaranteed edge computing microservices ».
IEEE Transactions on Green Communications and Networking, vol. 9, nº 1.
pp. 108-124.
Bellal, Zouhir, Lahlou, Laaziz, Kara, Nadjia, Murphy, Timothy et Nguyen, Tan Phat.
2025.
« 3GC: A deadline-aware and energy-efficient resource allocation scheme for serverless edge computing ».
In IEEE 22nd Consumer Communications & Networking Conference (CCNC) (Las Vegas , NV, USA, Jan. 10-13, 2025)
Institute of Electrical and Electronics Engineers Inc..
Bellavance, Xavier, Leclercq, Aurore, Mouret, Thibault, Landry-blais, Alexandre, Picard, Mathieu et Brailovski, Vladimir.
2025.
« Micro-mixing injector manufacturing in refractory metal using laser powder bed fusion process ».
In ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (Memphis, TN, USA, June 16-20, 2025)
American Society of Mechanical Engineers (ASME). Belvisi, Tristan et Boland, Jean-François. 2025. « Transformer les programmes de génie par la gestion du changement ». Communication lors de la conférence : Congrès de l'Acfas (Montréal, QC, Canada, 5-13 mai 2025).
Ben Salah, Mohamed Khalil, Jouvet, Philippe et Noumeir, Rita.
2025.
« PICU face and thoracoabdominal detection using self-supervised divided space–time mamba ».
Life, vol. 15, nº 11.
Ben Yahya, Maher, Lamothe, Sébastien et Lachance-Tremblay, Éric.
2025.
« Effect of temperature and relative humidity on cement-bitumen treated materials produced in the laboratory using emulsion or foamed bitumen ».
Construction and Building Materials, vol. 468.
Benabdesselam, Abderraouf, Pham, Quang Hung, Gagnon, Martin et Tahan, Antoine.
2025.
« A multi-layer perceptron approach for indirect measurement of erosive cavitation in hydraulic turbines ».
In IET Conference Proceedings (Bruges, Belgium, June 02-05, 2025)
pp. 29-34.
Institution of Engineering and Technology.
Benaissa, Sanae, Harvey, Derek et Momen, Gelareh.
2025.
« Thermographic analysis of ethylene glycol–based aircraft anti-icing fluid: Investigation of fluid failure mechanisms during simulated snow endurance tests ».
Cold Regions Science and Technology, vol. 234.
Benallal, Abdellah, Cheggaga, Nawal, Hebib, Amine et Ilinca, Adrian.
2025.
« LSTM-based state-of-charge estimation and user interface development for lithium-ion battery management ».
World Electric Vehicle Journal, vol. 16, nº 3.
Benavides-Guerrero, Jaime A., Fourmont, Paul, Gerlein, Luis Felipe, Angel-Ospina, Astrid C., Machuca-Martinez, Fiderman, Vaussenat, Fabrice, Ross, Caroline A. et Cloutier, Sylvain G..
2025.
« Black anatase-TiO2 electrodes for sun-activated photocatalytic degradation of organic water contaminants ».
Surfaces and Interfaces, vol. 58.
Benavides-Guerrero, Jaime A., Gerlein, Luis F., Angel-Ospina, Astrid C., Fourmont, Paul, Bhattacharya, Abhiroop, Zirakjou, Abbas, Vaussenat, Fabrice, Ross, Caroline A. et Cloutier, Sylvain G..
2025.
« Room-temperature laser crystallization of oxygen vacancy-engineered zirconia for additive manufacturing ».
Additive Manufacturing, vol. 111.
Benazzouz, Lydia, Baiteche, Mounir, Ménard, Patrice et Jahazi, Mohammad. 2025. « Modeling the influence of stool volume on flow behavior and defect formation in a 20 MT steel ingot ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Benazzouz, Lydia, Loucif, Abdelhalim, Brionne, Gary, Zhang, Chunping, Gallego, Paloma Isabel, Levesque, Jean-Benoit, Boutarek-Zaourar, Naima et Jahazi, Mohammad.
2025.
« Assessing the influence of DSC parameters on accurate determination of liquidus and solidus temperatures of a medium carbon low-alloy steel ».
Journal of Phase Equilibria and Diffusion, vol. 46, nº 1.
pp. 119-132.
Benbelghit, Abdellah, Gherbi, Abdelouahed, Bali, Ahmed et Hladik, Pierre-Emmanuel.
2025.
« Integrating VMD and convolutional transformers for optimized solar energy management in IoT monitoring systems ».
In 28th International Symposium on Real-Time Distributed Computing (ISORC) (Toulouse, France, May 26-28, 2025)
pp. 102-111.
Institute of Electrical and Electronics Engineers Inc..
Benesch, Danielle, Villatte, Bérangère, Vinet, Alain, Hébert, Sylvie, Voix, Jérémie et Bouserhal, Rachel E..
2025.
« Stress classification with in-ear heartbeat sounds ».
Computers in Biology and Medicine, vol. 186.
Benidir, Ahmed, Ould-Slimane, Hakima et Kara, Nadjia.
2025.
« NEMESIS: An enhanced hybrid intrusion detection system leveraging deep Q-learning and random forest ».
In 16th International Conference on Emerging Ubiquitous Systems and Pervasive Networks / 15th International Conference on Current and Future Trends of Information and Communication Technologies in Healthcare (Istanbul, Turkey, Oct. 28-30, 2025)
Coll. « Procedia Computer Science », vol. 272.
pp. 202-209.
Elsevier B.V..
Benisi Ghadim, H., Godin, A., Veillere, A., Duquesne, M. et Haillot, D..
2025.
« Review of thermal management of electronics and phase change materials ».
Renewable and Sustainable Energy Reviews, vol. 208.
Benoit, Thomas, Martel, Jean-Luc, Bilodeau, Emilie, Brissette, François, Charron, Alain, Brulé, Dominic, Rivard, Gilles et Deslauriers, Simon.
2025.
« Limits of blue and green infrastructures to adapt actual urban drainage systems to the impact of climate change ».
Journal of Irrigation and Drainage Engineering, vol. 151, nº 2.
Bensoussan, David.
11 mars 2025.
« De l’emprise grandissante de la science ».
The Times of Israël.
Bensoussan, David.
7 juillet 2025.
« Le moi en devenir : Science, conscience et intelligence artificielle ».
The Times of Israël.
Bensoussan, David.
7 mai 2025.
« Repenser la science ».
The Times of Israël.
Bensoussan, David.
9 janvier 2025.
« À la recherche de l’origine de l’univers ».
The Times of Israël.
Bensoussan, David, Ghodbane, Azeddine et Hammami, Maher.
2025.
« Applying the simple adaptive control to a design using a B controller ».
In World Congress: 13th International Conference on Mathematical Problems in Engineering, Aerospace, and Sciences (Prague, Czech Republic, June 27-30, 2023)
Coll. « AIP Conference Proceedings », vol. 3117.
American Institute of Physics.
Bensoussan, David et Kloda, Samuel S..
23 juillet 2025.
« L’esprit de Pugwash ».
La Presse.
Benzeguir, Zine El Abidine, Chaallal, Omar et Godat, Ahmed.
2025.
« Effective technique to prevent failure of CFRP confined columns ».
In Proceedings of the 2nd International Conference on Civil Engineering: Innovations & Advancement (ICCEIA25) (Paris, France, Aug. 21-23, 2025)
International ASET Inc..
Bernier, Simon, Levesque, Mélanie, Provencher, Hélène, Bertrand, Alexandre et David, Eric.
2025.
« Polarization and depolarization current analysis on hydrogenerators ».
In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025)
Institute of Electrical and Electronics Engineers Inc..
Berraha, Youness, Vaillancourt, Michel, Doré, Guy, Bilodeau, Jean-Pascal et Perraton, Daniel.
2025.
« Investigation of bottom-up pavement fatigue damage around an idealised transverse crack during an APT campaign ».
Road Materials and Pavement Design.
Berriot, Audrey, Evin, Morgane, Kerkouche, Karim, Laroche, Elisabeth, Gerard, Eva et Wagnac, Eric.
2025.
« Exploring the effect of displacement rate on the mechanical properties of denticulate ligaments through uniaxial tensile testing ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 162.
Bertram, Joshua, Garces, Irina et Jakubinek, Michael. 2025. « Digital sockets: towards manufacturing tailorable prosthetic sockets utilizing voxel-based composites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bertrand, Olivier, Gardoni, Mickaël, Burrows, Mike et Cardinal, Julie Stal-Le.
2025.
« PhylOrg: Towards an efficient organizational design method by adapting phylogenetic analysis ».
In 25th International Conference on Engineering Design (ICED25) : "Design is a Team Sport" (Dallas, TX, USA, Aug. 11-14, 2025)
Coll. « Proceedings of the Design Society », vol. 5.
pp. 2591-2600.
Cambridge University Press. Bertucceli, Julie, Taillades, Werner, Daoust, Elie et Lerouge, Sophie. 2025. « Rheology as a tool to predict efficacy of liquid embolics for blood vessel occlusion ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bérubé, Marc-André, Lamothe, Sébastien, Bilodeau, Kevin et Carter, Alan.
2025.
« Exploring the effects of reclaimed asphalt pavement on hot-mix asphalt performance and the use of blending charts to predict them: A laboratory investigation ».
Journal of Testing and Evaluation, vol. 53, nº 2.
Bérubé, Pascal, Rancourt, Pr David et Blouin, Charles.
2025.
« Development of a low cost characterization method for drone-scale aircraft electric motors ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Bessghaier, Narjes, Ouni, Ali, Sayagh, Mohammed, Chouchen, Moataz et Mkaouer, Mohamed Wiem.
2025.
« Towards understanding code review practices for infrastructure-as-code: An empirical study on OpenStack projects ».
Empirical Software Engineering, vol. 30, nº 3.
Bezançon, Gauthier, Doutres, Olivier, Umnova, Olga, Leclaire, Philippe et Dupont, Thomas.
2025.
« Experimental analysis of metamaterial with improved high sound levels absorption using complex frequency plane ».
Applied Acoustics, vol. 231.
Bezançon, Gauthier, Lopez, Maël, Doutres, Olivier, Panneton, Raymond et Dupont, Thomas.
2025.
« Low-frequency absorption band in a thin acoustic metamaterial using acoustic black hole termination ».
Applied Acoustics, vol. 233.
Bhattacharya, Abhiroop et Cloutier, Sylvain G..
2025.
« MatMMFuse: Multimodal fusion model for material property prediction ».
Machine Learning: Science and Technology, vol. 6, nº 4.
Bhattarai, Ashish, Jackson, Michael et Luo, Yunhua. 2025. « Characterization of bone nonlinear material properties based on microstructure characterized by micro-CT imaging ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bhojaraju, Chandrasekhar et Ouellet-Plamondon, Claudiane M..
2025.
« Boosting cement hydration with boron nitride nanotubes ».
Cement and Concrete Composites, vol. 157.
Bilal, Muhammad, Eynard, Benoît et Guérineau, Julia.
2025.
« A community-driven database for the dynamic representation of approaches, processes, methods, and tools for multidisciplinary product development ».
In 25th International Conference on Engineering Design (ICED25) : "Design is a Team Sport" (Dallas, TX, USA, Aug. 11-14, 2025)
Coll. « Proceedings of the Design Society », vol. 5.
pp. 1-10.
Cambridge University Press.
Bilgrami, Zarina R., Castro, Eduardo, Agurto, Carla, Liebenthal, Einat, Ennis, Michaela, Baker, Justin T., Scott, Isabelle, Colton, Beau-Luke, Cho, Kang Ik K., Li, Linying, Tamayo, Zailyn, Henecks, Mara, Rahimi Eichi, Habiballah, Henry, Tae’lar, Addington, Jean, Alameda, Luis K., Arango, Celso, Breitborde, Nicholas J. K., Broome, Matthew R., Cadenhead, Kristin S., Calkins, Monica E., Chen, Eric Yu Hai, Choi, Jimmy, Conus, Philippe, Cornblatt, Barbara A., Ellman, Lauren M., Fusar-Poli, Paolo, Gaspar, Pablo A., Gerber, Carla, Glenthøj, Louise Birkedal, Horton, Leslie E., Hui, Christy, Kambeitz, Joseph, Kambeitz-Ilankovic, Lana, Keshavan, Matcheri S., Kim, Sung-Wan, Koutsouleris, Nikolaos, Kwon, Jun Soo, Langbein, Kerstin, Mamah, Daniel, Diaz-Caneja, Covadonga M., Mathalon, Daniel H., Mittal, Vijay A., Nordentoft, Merete, Pearlson, Godfrey D., Perez, Jesus, Perkins, Diana O., Powers, Albert R., Rogers, Jack, Sabb, Fred W., Schiffman, Jason, Shah, Jai L., Silverstein, Steven M., Smesny, Stefan, Stone, William S., Yassin, Walid, Strauss, Gregory P., Thompson, Judy L., Upthegrove, Rachel, Verma, Swapna, Wang, Jijun, Wolf, Daniel H., McGorry, Patrick D., Kahn, Rene S., Kane, John M., Anticevic, Alan, Bearden, Carrie E., Dwyer, Dominic, Billah, Tashrif, Bouix, Sylvain, Pasternak, Ofer, Shenton, Martha E., Woods, Scott W., Nelson, Barnaby, Cecchi, Guillermo A., Corcoran, Cheryl M. et Wolff, Phillip M..
2025.
« Collecting language, speech acoustics, and facial expression to predict psychosis and other clinical outcomes: strategies from the AMP® SCZ initiative ».
Schizophrenia, vol. 11, nº 1.
Billah, Tashrif, Cho, Kang Ik K., Borders, Owen, Chung, Yoonho, Ennis, Michaela, Jacobs, Grace R., Liebenthal, Einat, Mathalon, Daniel H., Mohandass, Dheshan, Nicholas, Spero C., Pasternak, Ofer, Penzel, Nora, Eichi, Habiballah Rahimi, Wolff, Phillip, Anticevic, Alan, Laulette, Kristen, Nunez, Angela R., Tamayo, Zailyn, Buccilli, Kate, Colton, Beau-Luke, Dwyer, Dominic B., Hendricks, Larry, Yuen, Hok Pan, Spark, Jessica, Tod, Sophie, Carrington, Holly, Chen, Justine T., Coleman, Michael J., Corcoran, Cheryl M., Haidar, Anastasia, John, Omar, Kelly, Sinead, Marcy, Patricia J., Matneja, Priya, McGowan, Alessia, Ray, Susan E., Veale, Simone, Winter-Van Rossum, Inge, Addington, Jean, Allott, Kelly A., Calkins, Monica E., Clark, Scott R., Gur, Ruben C., Harms, Michael P., Perkins, Diana O., Ruparel, Kosha, Stone, William S., Torous, John, Yung, Alison R., Zoupou, Eirini, Fusar-Poli, Paolo, Mittal, Vijay A., Shah, Jai L., Wolf, Daniel H., Cecchi, Guillermo, Kapur, Tina, Kubicki, Marek, Lewandowski, Kathryn Eve, Bearden, Carrie E., McGorry, Patrick D., Kahn, René S., Kane, John M., Nelson, Barnaby, Woods, Scott W., Shenton, Martha E., Baker, Justin T. et Bouix, Sylvain.
2025.
« Enabling FAIR data stewardship in complex international multi-site studies: Data Operations for the Accelerating Medicines Partnership® Schizophrenia Program ».
Schizophrenia, vol. 11, nº 1.
Bilodeau, Emilie, Martel, Jean-Luc, Arsenault, Richard et Brissette, François.
2025.
« Evaluation of the impact of rainfall increases on runoff in urban watersheds ».
Journal of Water Management Modeling, vol. 33.
Bissainthe-Vandermeer, Sebastian, Hanson, Ronald et O'brien, Paul. 2025. « A parametric study of passive airflow within Trombe wall air channels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Bisulandu, Baby-Jean Robert Mungyeko, Mboko, Marcel Tsimba, Rousse, Daniel et Ilinca, Adrian. 2025. « Thermodynamic performances of an absorption diffusion refrigeration system, equipped with an ejector-compressor, using the thermal energy of the exhaust gases of cement kilns ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Blal, Redouane, Leshob, Abderrahmane, Mili, Hafedh, Benzarti, Imen, Hadaya, Pierre et Rab, Raqeebir.
2025.
« SOA services identification and design methods from business models: A systematic literature review ».
IEEE Access, vol. 13.
pp. 9879-9901. Blanchard, François, Nabki, Frederic, Amirkhan, Fatemah et Robichaud, Alexandre (inventeurs) 7 janvier 2025. « Terahertz modulation system and method of modulating a terahertz signal ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,188,863.
Boateng, Gordon Owusu, Sami, Hani, Alagha, Ahmed, Elmekki, Hanae, Hammoud, Ahmad, Mizouni, Rabeb, Mourad, Azzam, Otrok, Hadi, Bentahar, Jamal, Muhaidat, Sami, Talhi, Chamseddine, Dziong, Zbignew et Guizani, Mohsen.
2025.
« A survey on large language models for communication, network, and service management: Application insights, challenges, and future directions ».
IEEE Communications Surveys and Tutorials.
Boccanfuso, Robert et Minaker, Bruce.
2025.
« Evaluation of braking strategies for collision avoidance ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Bolduc, Marie-Pier et Vermeire, Brian. 2025. « Scale resolving aerodynamics optimization leveraging high order methods ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Boniface Awatcha, Willy, Nadeau, Sylvie et Hof, Lucas.
2025.
« Circular economy in automotive disassembly: Challenges and opportunities for end-of-life vehicles ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montréal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie. 2025. « Individual calibration of in-ear noise dosimeters: Enhanced dual-microphone method in the unoccluded ear ». Communication lors de la conférence : NOISE-CON 2025 (Stowe, VT, USA, June 09-11, 2025). Bose, Akshai, Jitvisuttikul, Jakra, Wang, Zhiyu, Zakani, Behzad et Grecov, Dana. 2025. « Waste cooking oil (WCO) added with cationic cellulose nanocrystals (cCNC) as a green lubricant ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
BouAbid, H., Dhouib, K. et Gharbi, A..
2025.
« Production/preventive maintenance comprehensive approach for manufacturing systems susceptible to quality degradation ».
Arabian Journal for Science and Engineering, vol. 50, nº 14.
pp. 11237-11256.
Boualouache, Abdelwahab, Silva, Vinicius F., Tang, Qiang, Pardo, Enric, Cherrier, Sylvain, Bousalem, Badre, Faye, Sébastien et Langar, Rami.
2025.
« CROSS-FLUX: A semi-virtualized 5G-V2X cross-border platform for scalable security testing ».
In 16th International Conference on Network of the Future (NoF) (Montreal, QC, Canada, Sept. 30-Oct. 03, 2025)
pp. 111-113.
Institute of Electrical and Electronics Engineers Inc..
Bouaziz, Amina, Saied, Mohamed Aymen, Sayagh, Mohammed, Ouni, Ali et Mkaouer, Mohamed Wiem.
2025.
« An empirical study on microservices deployment trends, topics and challenges in stack overflow ».
In IEEE International Conference on Software Analysis, Evolution and Reengineering (SANER) (Montreal, QC, Canada, Mar. 04-07, 2025)
pp. 113-123.
Institute of Electrical and Electronics Engineers Inc..
Boubaker, Anis et Fang, Ying.
2025.
« Automated generation of challenge questions for student code evaluation using abstract syntax tree embeddings and RAG: An exploratory study ».
In ICETM 2024 - Proceedings of the 2024 7th International Conference on Educational Technology Management (Changsha, China, Nov. 08-10, 2024)
pp. 277-282.
Association for Computing Machinery, Inc.
Boubaker, Eya et Jaafar, Wael.
2025.
« On the uplink optimization of RIS-assisted multi-user HAPS communications ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 4370-4375.
Institute of Electrical and Electronics Engineers Inc..
Boucher, Pierre, Fréchard, Victor, Ramirez Cardona, Diego et Ouellet-Plamondon, Claudiane.
2025.
« Overcoming challenges in bamboo connections: A review of mechanical properties and structural considerations ».
In Bio-Based Building Materials - Proceedings of ICBBM 2025, Volume 1 (Rio de Janeiro, Brazil, June 17-20, 2025)
Coll. « RILEM Bookseries », vol. 60.
pp. 242-259.
Springer. Boucherit, Yacine et Jahazi, Mohammad. 2025. « Evaluation of local mechanical properties and correlation with tensile properties of AA7075-T6 friction stir welds via shear punch testing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Boudabbous, Emna, Karaa, Mohamed, Sboui, Lokman, Montecinos, Julio et Alam, Omar.
2025.
« A data-driven platform for visualizing and analyzing public transit schedule deviations ».
In 28th International Symposium on Real-Time Distributed Computing (ISORC) (Toulouse, France, May 26-28, 2025)
pp. 393-398.
Institute of Electrical and Electronics Engineers Inc..
Boudghene Stambouli, Ahmed et Guizani, Lotfi.
2025.
« Neural network-based prediction of amplification factors for nonlinear soil behaviour: Insights into site proxies ».
Applied Sciences, vol. 15, nº 7.
Boudjelal, Hillal, Torres, Yaniel et Nadeau, Sylvie. 2025. « Adaptation de la typologie de la méthode HFACS pour l’assemblage numérique ». Communication lors de la conférence : Congrès annuel de l’Association Canadienne d’Ergonomie (Québec, QC, Canada, 06-09 oct. 2025). Boukor, Maryam, Gosselin, Frederick et Laurendeau, Eric. 2025. « Flow-induced instabilities and wake dynamics of a reconfigured plate ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bouktif, Salah, Cheniki, Abderraouf, Ouni, Ali et El-Sayed, Hesham.
2025.
« Parameterized-action based deep reinforcement learning for intelligent traffic signal control ».
Engineering Applications of Artificial Intelligence, vol. 159, nº Part A.
Bouktif, Salah, Khanday, Akib Mohi Ud Din et Ouni, Ali.
2025.
« Explainable predictive model for suicidal ideation during COVID-19: Social media discourse study ».
Journal of Medical Internet Research, vol. 27.
Bouldjedri, Oussama, Wazzeh, Mohamed, Sami, Hani, Talhi, Chamseddine et Ould-Slimane, Hakima.
2025.
« Privacy-preserving continuous user authentication using federated learning ».
In International Wireless Communications and Mobile Computing (IWCMC) (Abu Dhabi, UAE, May 12-16, 2025)
pp. 1404-1409.
IEEE.
Bourgeois, Guillaume, Angulo, Géraldine, El-Zein, Hassana, Courboulay, Vincent et Cheriet, Mohamed.
2025.
« Advancing sustainability through digital maturity: An open approach for evaluating Quebec Organizations’ environmental responsibility ».
In
Accelerating the Socio-Ecological Transition: Strategies and Innovations for Sustainable Development.
pp. 199-225. Cham : Springer Nature Switzerland. Bourgeois, Janika, Cara, Axelle, Buron, Jean-David et Houde, Sébastien. 2025. « Pressure variability in cavitation bubbles induced by low-voltage discharge ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bousalem, Badre, Silva, Vinicius F., Bakhouche, Selsabil-Belkis, Langar, Rami et Cherrier, Sylvain.
2025.
« Detecting and mitigating DDoS attacks in 5G-V2X networks: A deep learning-based approach ».
In Global Information Infrastructure and Networking Symposium (GIIS) (Dubai, UAE, Feb. 25-27, 2025)
Institute of Electrical and Electronics Engineers Inc..
Bouterra, Sami, Belamadi, Riyadh, Djemili, Abdelouaheb et Ilinca, Adrian.
2025.
« Microcylinder and slot combination for flow separation control over a wind turbine airfoil ».
Wind Energy, vol. 28, nº 7.
Bouvette, Véronique, Guay, Samuel, De Beaumont, Louis, Petit, Yvan, Vinet, Sophie-Andrée et Wagnac, Eric.
2025.
« Role of player-specific white matter parcellation and scaling in impact-induced strain responses ».
Biomechanics and Modeling in Mechanobiology, vol. 24, nº 3.
pp. 939-961. Bouvette, Véronique, Petit, Yvan, Guay, Samuel, Beaumont, Louis De et Wagnac, Eric. 2025. « Investigating time-dependent strain-based cumulative head impact exposure in Canadian varsity football ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bouzabia, Hamda, Do, Tri Nhu et Kaddoum, Georges.
2025.
« Generative AI-empowered resilient adaptive ISAC against adversarial machine learning attacks ».
IEEE Transactions on Vehicular Technology.
Bouziani, M., Bouziani, A., Zaari, H., Mezzat, F. et Hausler, R..
2025.
« Tuning the optical and photocatalytic properties of hexagonal boron nitride through Fe and co doping: A DFT study ».
Computational and Theoretical Chemistry, vol. 1245.
Bouziani, Mariam, Bouziani, Asmae, Hsini, Abdelghani, Bianchi, Claudia L., Falletta, Ermelinda, Di Michele, Alessandro, Çelik, Gökhan et Hausler, Robert.
2025.
« Synergistic photocatalytic degradation of methylene blue and ibuprofen using Co₃O₄-Decorated hexagonal boron nitride (hBN) composites under Sun-like irradiation ».
Chemosphere, vol. 371.
Bouzid, Abdel-Hakim.
2025.
« A study on the thighness parameter used in the evaluation of the PVRC gasket constants ».
In ASME 2025 Pressure Vessels & Piping Conference (Montreal, QC, Canada, July 20-25, 2025)
American Society of Mechanical Engineers (ASME).
Bouzid, Abdel-Hakim.
2025.
« On the analytical modeling of autofrettaged cylinders subjected to bauschinger and softening effects ».
Journal of Pressure Vessel Technology, vol. 147, nº 6.
Braga, Rafael Gomes, Tahir, Muhammad Owais, Karimi, Sina, Dah-Achinanon, Ulrich, Iordanova, Ivanka et St-Onge, David.
2025.
« Intuitive BIM-aided robotic navigation and assets localization with semantic user interfaces ».
Frontiers in Robotics and AI, vol. 12.
Brahmi, Brahim, Ghommam, Jawhar et Saad, Maarouf.
2025.
« Disturbance observer-based backstepping-super twisting control for robust trajectory tracking in robot manipulators ».
IEEE/ASME Transactions on Mechatronics.
Brahmi, Brahim et Saad, Maarouf.
2025.
« Adaptive control for end-effector exoskeleton robots with unknown dynamics and actuator parameters ».
IEEE Transactions on Systems, Man, and Cybernetics: Systems, vol. 55, nº 12.
pp. 9520-9531.
Brahmi, Brahim, Saad, Maarouf et Rahman, Mohammad Habibur.
2025.
« Advanced impedance electromyographic-based control for an upper limb exoskeleton robot ».
In
Design and control of rehabilitation robots: From concept to therapy.
Coll. « Studies in systems, decision and control », vol. 585.
pp. 271-301. Springer.
Branje, Melanie, Sadeghieh, Mehrdad, Kishawy, Hossam, Macdonald, Brendan et Hosseini, Ali.
2025.
« Jerk-limited profiles for a grooved cam to operate a Stirling engine displacer piston ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Brassard, Jean-Denis, Sobhani, Sarah, Osorio, Maria-Lucia Loaiza et Momen, Gelareh.
2025.
« New insights into icephobic material assessment: Introducing the human motion–inspired automated apparatus (HMA) ».
Cold Regions Science and Technology, vol. 229.
Braun, Léo, Lalonde, Sébastien et Guilbault, Raynald. 2025. « Efficient semi-analytical method to assess contact conditions in multi-layered helical strand cables ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Bretin, R. et Bocher, P..
2025.
« Neighborhood and surface effects on polycrystal stress field extreme values: An analysis in linear elastic range by means of cellular automaton ».
International Journal of Fatigue, vol. 192.
Breton, Ismaël, Campeau-Lecours, Alexandre et Bouffard, Jason.
2025.
« Design and development of SIARA 2: A low-cost assistive robotic arm for individuals with upper body disabilities ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Brial, Victor, Ouellet-Plamondon, Claudiane et Duplessis, Thomas.
2025.
« Multi-scale analysis of the impact of graphene oxide in cement-based materials ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil.
Bricout, C., Cho, K., Harms, M., Pasternak, O., Bearden, C., McGorry, P. D., Kahn, R. S., Kane, J. M., Nelson, B., Woods, S. W., Shenton, M. E., Bouix, S. et Kahou, S. E..
2025.
« Improving quality control of MRI images using synthetic motion data ».
In IEEE 22nd International Symposium on Biomedical Imaging (ISBI) (Houston, TX, USA, Apr. 14-17, 2025)
IEEE Computer Society.
Brignol, Arnaud, Cheriet, Farida, Aubin-Fournier, Jean-François, Fortin, Carole et Laporte, Catherine.
2025.
« Robust unsupervised texture segmentation for motion analysis in ultrasound images ».
International Journal of Computer Assisted Radiology and Surgery, vol. 20, nº 1.
pp. 97-106.
Brisebois, Patrick, Aouinti, Meriam, Jafari, Maziar, Siaj, Mohamed et Ouellet-Plamondon, Claudiane.
2025.
« Adsorption dynamics of disodium octaborate tetrahydrate on clay minerals: Implications for construction wood protection ».
Small Methods, vol. 9, nº 1.
Brisebois, Patrick, Ohmer, Lucas, Joncas, Simon et Ouellet-Plamondon, Claudiane.
2025.
« Recycling polymers to make greenhouses ».
In ASABE Annual International Meeting (Toronto, ON, Canada, July 13-16, 2025)
American Society of Agricultural and Biological Engineers. Brown, David. 2025. « Conservative and consistent data reconstruction for multi-physics applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Bu, Lingyu, Major, Paul et Romanyk, Dan. 2025. « Integrating micro-CT and FEA to explore the effect of gap variability in orthodontic aligner biomechanics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Cai, Jun, Akbarzadeh, Hamid et Mélançon, David. 2025. « Kresling origami-inspired multistable composites for shape reconfiguration ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Cai, Jun, Chen, Yiwen, Seyedkanani, Alireza, Cerruti, Marta et Akbarzadeh, Hamid. 2025. « Multifunctional graphene oxide origamis with morphable reconfiguration ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Cai, Jun, Yan, Lifu, Seyedkanani, Alireza, Orsat, Valérie et Akbarzadeh, Hamid. 2025. « Nano-architected GaN metamaterials with significant piezoelectric effects ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Cailhier, Alexandre, Abi-Zeid, Irène, Lavoie, Roxane, Marleau Donais, Francis et Cerutti, Jérôme.
2025.
« Where to plan shared streets: Development and application of a multicriteria spatial decision support tool ».
European Journal of Operational Research, vol. 322, nº 2.
pp. 665-678.
Cakir, Efe et Dumond, Patrick.
2025.
« A comparative analysis of reinforcement learning and conventional deep learning approaches for bearing fault diagnosis ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Caldera, Ganga, Stolle, Jacob, Pham Van Bang, Damien, Murphy, Enda et Knox, Paul.
2025.
« Seasonal and inter-annual changes in wave attenuation by a constructed salt marsh on a sloping bed ».
Ecological Engineering, vol. 221.
Campion, Donatien, Kreitcberg, Alena et Brailovski, Vladimir. 2025. « Analytical pretraining of artificial neural network models to mitigate limited experiment data availability in the L-PBF melt pool dimensions and densities predictions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Cantin, S., Chouak, M. et Garnier, F..
2025.
« Effects of fuel sulfur content and nvPM emissions on contrail formation: A CFD-microphysics study including the role of organic compounds ».
Journal of Aerosol Science, vol. 188.
Cárdenas, D., Côté, É, Turcotte-Menard, V., Nadeau, A., Stolle, D., Lina, J. M. et de la Sablonnière, R..
2025.
« The social change algorithm: A modeling approach to the psychology of social change ».
Peace and Conflict: Journal of Peace Psychology.
Cardona, Diego Ramirez, Leroy, Constance et Lachance-Tremblay, Éric.
2025.
« Simple method for characterizing the optical and insulating performance of materials destinated for building envelopes ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 52, nº 6.
pp. 1225-1242.
Carichon, Florian, Rampa, Romain et Farnadi, Golnoosh.
2025.
« Crossing boundaries: Leveraging semantic divergences to explore cultural novelty in cooking recipes ».
In ACMF AccT 2025 - Proceedings of the 2025 ACM Conference on Fairness, Accountability,and Transparency (Athens, Greece, June 23-26, 2025)
pp. 2200-2214.
Association for Computing Machinery, Inc.
Carillo, K., Pires, L., Padois, T., Brailovski, V. et Doutres, O..
2025.
« Enhancing low-frequency transmission loss in aircraft fuselage sidewalls with a flat array of covered Helmholtz resonators metamaterial ».
Aerospace Science and Technology, vol. 166.
Carillo, Kévin, Sgard, Franck, Dazel, Olivier et Doutres, Olivier.
2025.
« Enhancing acoustic comfort for earplug users: Objective and subjective evaluation of bone-conducted sound with meta-earplugs incorporating Helmholtz resonators ».
Applied Acoustics, vol. 240.
Carlier, Florian, Kenné, Jean-Pierre et Hof, Lucas.
2025.
« Performance analysis of UWB localization in multi-floor industrial scenarios ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Carrasco-Teja, Mariana, Ndeh-Ngwa, Akumah, Akbari, Soheil, Izadi, Mahdi et Frigaard, Ian. 2025. « Development of advanced predictive software for optimizing oil and gas well cementing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Carreira-Barral, Israel, Díez-Hernández, Julieta, Igos, Elorri, Saidani, Michael, Ding, Tianran, Ramos da Silva, Tiago, Monteiro, Helena, Stingl, Andreas, Farias, Patricia M. A., Cardozo, Olavo, Ibáñez, Jesús, García-Moral, Ana, Tamayo-Ramos, Juan Antonio, Rumbo, Carlos, Barros, Rocío et Martel-Martín, Sonia.
2025.
« Driving sustainability at early-stage innovation in production of zinc oxide nanoparticles ».
Sustainable Production and Consumption, vol. 55.
pp. 353-372.
Carret, Jean-Claude et Babadopulos, Lucas F. A. L..
2025.
« Opening Letter of RILEM TC MWP: Mechanical wave propagation to characterize bituminous mixtures ».
RILEM Technical Letters, vol. 10.
pp. 15-21.
Carret, Jean-Claude, Bilodeau, Kevin, Herozi, Morteza Rezaeizadeh et Babadopulos, Lucas F. A. L..
2025.
« Effects of air void content and back‑calculation techniques on bituminous mixture modulus via impact resonance ».
Materials and Structures/Materiaux et Constructions, vol. 58, nº 6.
Carretero, Juan Antonio et Lavigne, Troy T.. 2025. « Towards fostering lifelong learning in engineering programs ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Castillo, Federico et Labbé, Jean-Philippe.
2025.
« Lineup polytopes of products of simplices ».
Annales de l'Institut Henri Poincare (D) Combinatorics, Physics and their Interactions, vol. 12, nº 4.
pp. 787-818. Catar, Louis, Rojas, Sebastian Zagal, Wadoux, Pierre, Tabiai, Ilyass et St-Onge, David. 2025. « A mechanical add-on for multi-resin SLA printing: Design, integration, and testing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Catar, Louis, Tabiai, Ilyass et St-Onge, David.
2025.
« Tensile tests of different families of ultra-lightweight photosensitive polymer microlattices ».
Journal of Engineering Materials and Technology, vol. 147, nº 4.
Catar, Louis, Zagal Rojas, Sebastián, Wadoux, Pierre, Tabiai, Ilyass et St-Onge, David.
2025.
« A mechanical add-on for multi-resin SLA printing: Design, integration, and testing ».
In Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE (Anaheim, CA, USA, Aug. 17-20, 2025)
American Society of Mechanical Engineers. Cavallieri, M. S., Acerbi, F., Montoya-Torres, J. R. et Viles, E.. 2025. « Sustainable scheduling research analysis: Addressing methodological and practical gaps ». Communication lors de la conférence : Annual Conference of the European Operations Management Association (EUROMA) (Milan, Italy, June 13-18, 2025).
Cavallieri, María Sol, Viles, Elisabeth et Montoya-Torres, Jairo R..
2025.
« Sustainable production scheduling: Insights from real-life applications ».
Production Planning and Control, vol. 36, nº 12.
pp. 1595-1622.
Ceballos-Alvarez, Carlos, Jafari, Maziar, Siaj, Mohamed, Shahgaldi, Samaneh et Izquierdo, Ricardo.
2025.
« Influence of graphene oxide on mechanical and morphological properties of Nafion® membranes ».
Nanomaterials, vol. 15, nº 1.
Ceballos-Alvarez, Carlos, Maziar, Jafari, Moradizadeh, Leila, Siaj, Mohamed, Shahgaldi, Samaneh et Izquierdo, Ricardo.
2025.
« Enhanced Graphene Oxide-Nafion® membranes for proton exchange membrane water electrolysis ».
Journal of Membrane Science, vol. 734.
Chaboty, Aubin, Nguyen, Vu-Hieu, Haiat, Guillame et Bélanger, Pierre.
2025.
« Estimating the properties of bone phantom cylinders through the inversion of axially transmitted low-frequency ultrasonic guided waves ».
Ultrasonics, vol. 155.
Chaddad, Ahmad, Wu, Yihang, Jiang, Yuchen, Bouridane, Ahmed et Desrosiers, Christian.
2025.
« Simulations of common Unsupervised Domain Adaptation algorithms for image classification ».
IEEE Transactions on Instrumentation and Measurement, vol. 74.
Chaddad, Ahmad, Wu, Yihang, Kateb, Reem et Desrosiers, Christian.
2025.
« Domain adaptation techniques for natural and medical image classification ».
Information Sciences, vol. 721.
Chahdoura, Sabrine, Bahloul, Riadh, Tlija, Mehdi et Tahan, Antoine.
2025.
« Multi-objective optimization of PLA-FDM parameters for enhancement of industrial product mechanical performance based on GRA-RSM and BBD ».
Progress in Additive Manufacturing, vol. 10, nº 2.
pp. 1355-1383.
Chahoud, Mario, Sami, Hani, Mizouni, Rabeb, Bentahar, Jamal, Mourad, Azzam, Otrok, Hadi et Talhi, Chamseddine.
2025.
« Reward shaping in DRL: A novel framework for adaptive resource management in dynamic environments ».
Information Sciences, vol. 715.
Chahoud, Mario, Sami, Hani, Mizouni, Rabeb, Otrok, Hadi, Bentahar, Jamal, Mourad, Azzam et Talhi, Chamseddine.
2025.
« Multi-agent deep reinforcement learning for resource management in on-demand environments ».
In International Wireless Communications and Mobile Computing (IWCMC) (Abu Dhabi, UAE, May 12-16, 2025)
pp. 1264-1269.
Institute of Electrical and Electronics Engineers Inc..
Chakraborty, Liton, Spinney, Jennifer A., Malomo, Daniele, Thistlethwaite, Jason, Motlaghzadeh, Kasra, Jahangir, Mohammad Sina, Henstra, Daniel, Andrews, Sheldon et Pulatsu, Bora.
2025.
« Assessing the environmental justice implications of seismic risk in Ottawa-Gatineau and Montreal metropolitan areas ».
International Journal of Disaster Risk Reduction, vol. 123.
Chakraborty, Subhadip, Modi, Gaurav, Singh, Bhim, Panigrahi, B. K., Singh, Vipin, Chandra, Ambrish et Al-Haddad, Kamal.
2025.
« A control for preventing false tripping of grid-tied renewable systems with increased solar penetration and fluctuating load demand ».
IEEE Transactions on Industrial Electronics, vol. 72, nº 4.
pp. 3722-3734.
Chander, Subhash et Kumar, Neeraj.
2025.
« Non-boiling heat transfer characteristics of water sprays impinging on a heated surface ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Chandra Shekar, Arjun, Leclair, Jean-Philippe, Zitoune, Redouane et Hof, Lucas A..
2025.
« Surface engineering strategies for aerospace composite repairs: Machining and texturation of additive manufacturing parts by abrasive waterjet ».
Wear, vol. 570.
Chapuis, Robert P., Taveau, Coline, Duhaime, François, Weber, Simon, Marefat, Vahid, Zhang, Lu, Blessent, Daniela, Bouaanani, Najib et Pelletier, Dominique.
2025.
« Using H-convergence to calculate the numerical errors for 1D unsaturated seepage under steady-state conditions ».
International Journal for Numerical and Analytical Methods in Geomechanics, vol. 49, nº 1.
pp. 345-358.
Charonnat, Bastien, Baraer, Michel, Valence, Eole, Masse-Dufresne, Janie, Monty, Chloé, Wang, Kaiyuan, Devoie, Elise et McKenzie, Jeffrey M..
2025.
« The influence of a rock glacier on the riverbed hydrological system ».
Hydrology and Earth System Sciences, vol. 29, nº 22.
pp. 6479-6498.
Chaudhry, Shubham, Abdedou, Azzedine et Soulaïmani, Azzeddine.
2025.
« Data-driven non-intrusive reduced order modelling of selective laser melting additive manufacturing process using proper orthogonal decomposition and convolutional autoencoder ».
Advanced Modeling and Simulation in Engineering Sciences, vol. 12, nº 1.
Chavanel-Precloux, Lucas, Maranzana, Roland et Hof, Lucas A..
2025.
« On the modular design application for the gas turbine sector: A performance optimization approach in the context of industry 4.0 ».
Fluids, vol. 10, nº 3.
Chavernac, Florian, Albert, Kévin, Huy, Hoang Vu, Ramachandran, Srinivasan, Noumeir, Rita et Jouvet, Philippe.
2025.
« Real-time current volume estimation system from an Azure Kinect camera in pediatric intensive care: Technical development ».
Sensors, vol. 25, nº 10.
Chen, Chen, Liu, Tinging, Pu, Zonghua, Chen, Zhangsen, Zhang, Xiaofeng, Huang, Qiufeng, Al-Enizi, Abdullah M., Nafady, Ayman, Zhang, Gaixia et Sun, Shuhui.
2025.
« Unveiling the geometric site dependence of Co-based spinel oxides in the halogen evolution reaction ».
Advanced Sustainable Systems, vol. 9, nº 1.
Chen, Duzhi, Bailly, Nicolas et Evin, Morgane. 2025. « Constitutive model identification and validation for spinal cord finite element analysis under complex loading ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Chen, Haoyu, Shi, Jiahao et Akbarzadeh, Abdolhamid. 2025. « Multifunctional triboelectric mechanical metamaterials with sustainable electric output ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Chen, Jundong, Huang, Tingting, Zeng, Huanqiang, Cai, Guofa, Zhou, Haoyu, Shen, Ziqin et Kaddoum, Georges.
2025.
« A novel deep learning-based receiver for non-coherent chaotic communication systems with temporal dependencies and spectral properties of chaotic signals ».
IEEE Transactions on Communications.
Chen, Nuo et Pan, Ya-Jun.
2025.
« Haptic robotic hand design and control with neural-network based system identification ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Chen, Shujia, Straney, Don et Pasini, Damiano. 2025. « Rotation-driven multistable material system with reprogrammable logic for sequential-parallel computing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Chen, Yunxi, Douanne, Noélie, Wu, Tad, Kaur, Ishman, Tsering, Thupten, Erzingatzian, Armen, Nadeau, Amélie, Juncker, David, Nerguizian, Vahé et Burnier, Julia V..
2025.
« Leveraging nature’s nanocarriers: Translating insights from extracellular vesicles to biomimetic synthetic vesicles for biomedical applications ».
Science Advances, vol. 11, nº 9.
Chen, Yu-Tung et Behdinan, Kamran.
2025.
« The impact of membrane thickness on IPMC actuation dynamics: A simulation study ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Chen, Zhangsen, Zhang, Lei, Sun, Shuhui et Zhang, Gaixia.
2025.
« Electrochemical cell designs for efficient carbon dioxide reduction and water electrolysis: Status and perspectives ».
Advanced Materials, vol. 37, nº 33.
Chenail-Larcher, Zacharie, Minani, Jean Baptiste et Moha, Naouel.
2025.
« Test generation from use case specifications for IoT systems: Custom, LLM-based, and hybrid approaches ».
In IEEE Conference on Software Testing, Verification and Validation (ICST) (Napoli, Italy, Mar. 31-Apr. 04, 2025)
pp. 597-602.
Institute of Electrical and Electronics Engineers Inc..
Cheng, Alexandre Pellan, Widman, Adam J., Arora, Anushri, Rusinek, Itai, Sossin, Aaron, Rajagopalan, Srinivas, Midler, Nicholas, Hooper, William F., Murray, Rebecca M., Halmos, Daniel, Langanay, Theophile, Chu, Hoyin, Inghirami, Giorgio, Potenski, Catherine, Germer, Soren, Marton, Melissa, Manaa, Dina, Helland, Adrienne, Furatero, Rob, McClintock, Jaime, Winterkorn, Lara, Steinsnyder, Zoe, Wang, Yohyoh, Alimohamed, Asrar I., Malbari, Murtaza S., Saxena, Ashish, Callahan, Margaret K., Frederick, Dennie T., Spain, Lavinia, Sigouros, Michael, Manohar, Jyothi, King, Abigail, Wilkes, David, Otilano, John, Elemento, Olivier, Mosquera, Juan Miguel, Jaimovich, Ariel, Lipson, Doron, Turajlic, Samra, Zody, Michael C., Altorki, Nasser K., Wolchok, Jedd D., Postow, Michael A., Robine, Nicolas, Faltas, Bishoy M., Boland, Genevieve et Landau, Dan A..
2025.
« Error-corrected flow-based sequencing at whole-genome scale and its application to circulating cell-free DNA profiling ».
Nature Methods.
Cheng, Qianru, Cai, Guofa, He, Jiguang et Kaddoum, Georges.
2025.
« Design and performance analysis of MEC-aided LoRa networks with power control ».
IEEE Transactions on Vehicular Technology, vol. 74, nº 1.
pp. 1597-1609.
Cheng, Ye, Bucknor, Norman et Raghavan, Madhu.
2025.
« Pack and vehicle level impacts of high C-rate cells for fast charging ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Chentouf, Samir Mourad, Grandmont, Philippe, Saadati, Mohammad, Amimer, Nora et Jahazi, Mohammad.
2025.
« Influence of friction-stir-processing parameters on the microstructure and local mechanical properties of an aluminium-6% magnesium-H18 alloy ».
Metals, vol. 15, nº 7.
Cheriet, Fayssal, Carter, Alan et Haddadi, Smail.
2025.
« Rheological simulation of bituminous mixes with crumb rubber by the dry process ».
Journal of Rubber Research, vol. 28, nº 1.
pp. 119-127.
Cheriet, Mohamed.
2025.
« Introduction ».
In
Accelerating the Socio-Ecological Transition: Strategies and Innovations for Sustainable Development.
pp. 1-3. Springer Science+Business Media.
Cheriguene, Youssra, Jaafar, Wael et Yanikomeroglu, Halim.
2025.
« Federated learning in UAV-assisted MEC systems: A comprehensive survey ».
IEEE Open Journal of the Communications Society, vol. 6.
pp. 7645-7676.
Cheung, Mattias K., Ahmadfard, Mohammadamin et Dworkin, Seth B..
2025.
« Analytical simulation of the thermal behaviour of parallel-series configurations of helical steel piles ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Chevinli, Zeinab Sadeghi, Fereidouni, Hamidreza et Kadoch, Michel.
2025.
« Efficient task scheduling using a hybrid Q-NEH and CS-GW approach in fog computing ».
In IEEE 49th Annual Computers, Software, and Applications Conference (COMPSAC) (Toronto, ON, Canada, July 08-11, 2025)
pp. 1444-1451.
Institute of Electrical and Electronics Engineers Inc..
Chheang, Sopheakreach, Cree, Duncan et Wiens, Travis.
2025.
« Weibull analysis of the effect of deposition temperature and number of layers on strength of fused deposition modeling plastics ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Chhetri, Ashim, Hammond, Keziah Naa Densua, Kodie-Ampaw, Joseph Kwabena, Bonsi, Adime Kofi et Essel, Ebenezer Ekow.
2025.
« Effect of partial sheltering on spanwise wake interference of unequal-height tandem circular cylinders ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Chiu, Po-Chun, Pirvaram, Atousa, Cooper, Thomas, Leung, Siu Ning et O’brien, Paul G.. 2025. « Enhancing cooling efficiency using parabolic reflectors in radiative cooling systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Choi, Young et Wereley, Norman. 2025. « Suspension stability of a magnetorheological fluid employing high viscosity linear polysiloxane carrier fluids: A two-year study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Chouchen, Moataz, Oukhay, Issam et Ouni, Ali.
2025.
« Learning to predict code review rounds in modern code review using multi-objective genetic programming ».
In GECCO 2025 Companion - Proceedings of the 2025 Genetic and Evolutionary Computation Conference Companion (Malaga, Spain, July 14-18, 2025)
pp. 599-602.
Association for Computing Machinery, Inc.
Chourlias, Athanasios, Violos, John et Leivadeas, Aris.
2025.
« Virtual sensors for smart farming: An IoT- and AI-enabled approach ».
Internet of Things, vol. 32.
Chowdhury, Akash, Misra, Sirshendu et Mitra, Sushanta. 2025. « Interface dynamics during droplet impact on a two-fluid system ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Chrétien, Antoine, Tahan, Antoine et Pelletier, Francis.
2025.
« Impact of wind turbine nominal power limitation over wind turbine blade remaining useful life and its economic consequences ».
Wind Engineering, vol. 49, nº 2.
pp. 426-443.
Cinà, Antonio Emanuele, Rony, Jérôme, Pintor, Maura, Demetrio, Luca, Demontis, Ambra, Biggio, Battista, Ben Ayed, Ismail et Roli, Fabio.
2025.
« AttackBench: Evaluating gradient-based attacks for adversarial examples ».
[Article de conférence]. Proceedings of the AAAI Conference on Artificial Intelligence, vol. 39, nº 3.
pp. 2600-2608.
Clancy, Kaitlyn, Xie, Siwen, Smith, Griffin et Onaizah, Onaizah.
2025.
« Automated fabrication of magnetic soft microrobots ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Clarabut, David, Robinson, Brandon, Sandhu, Rimple, Khalil, Mohammad, Pettit, Chris, Poirel, Dominique et Sarkar, Abhijit. 2025. « Parameter estimation and model comparison of nonlinear aerodynamic models for limit cycle oscillations using Bayesian inference ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Claudel, Jules et Clement, Julien.
2025.
« Analysing short-track speed skating performance factors ».
Sports Biomechanics.
Cloutier, Jacob, Malek, Sardar et Frigaard, Ian. 2025. « Non-linear finite element model for casing centralization ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Cohendet, Patrick, Dupouët, Olivier, Llerena, Patrick, Naggar, Raouf et Rampa, Romain.
2025.
« Knowledge-based approaches to the firm: an idea-driven perspective ».
Industrial and Corporate Change, vol. 34, nº 3.
pp. 479-501. Cohic, Antoine, Segers, Thibaut, Montes de Oca, Carlos Silva et Thamsuwan, Ornwipa. 2025. « Impact du port d’un exosquelette passif de support de dos sur les synergies musculaires ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).
Cohic, Antoine, Segers, Thibaut et Thamsuwan, Ornwipa.
2025.
« Impact of an occupational back-support exoskeleton on muscle synergies during a pick-up movement ».
European Journal of Applied Physiology.
Coker, Anirejuoritse, Bordatchev, Evgueni et Tutunea-Fatan, O. Remus.
2025.
« Analysis of temperature evolution along scanning trajectory during laser remelting ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Cole, Douglas F., Zednik, Ricardo J. et Hof, Lucas A.. 2025. « Diffusion, viscosity, and cycle times for high aspect ratio glass nanoimprinting ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Collaguazo, Adriana, Villavicencio, Monica, Abran, Alain et Vaca-Ruiz, Carmen.
2025.
« PyTime IoT: A bootcamp to motivate high school students to choose STEM careers ».
In IEEE Global Engineering Education Conference (EDUCON) (London, UK, Apr. 22-25, 2025)
IEEE Computer Society.
Collings, William, Schwarz, Jackson, Bakis, Charles E., El-Sayegh, Zeinab et El-Gindy, Moustafa.
2025.
« Finite element modelling of a non-pneumatic tire's spoke ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Colussi, Marco, Mascetti, Sergio, Dolz, Jose et Desrosiers, Christian.
2025.
« ReC- Ttt: Contrastive feature reconstruction for test-time training ».
In IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) (Tuscon, AZ, USA, Feb. 26-Mar. 06, 2025)
pp. 6699-6708.
Institute of Electrical and Electronics Engineers Inc.. Constantin, Nicolas G. et Sharma, Smarjeet (inventeurs) 13 mai 2025. « Power amplifier linearizing module and power amplifier system equipped therewith ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,301,172. Constantineau, Cédric, Deschênes, Pierre-Antony, Dubois, René et Brochu, Myriam. 2025. « Predicting the effect of large discontinuities on the fatigue strength of welds in turbine runners ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Corbett, Finley, Jeans, Tiger et Gerber, Andrew.
2025.
« A computational study investigating the influence a co-rotating hub retrofit has on tidal turbine performance ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Corbo, Rosario et Glaus, Mathias.
2025.
« Energy production based on the chain’s service area size in biomethane recovery ».
Energies, vol. 18, nº 8.
Cornejo, Gonzalo et Lange, Carlos.
2025.
« Searching for key variables influencing upstream building effects in urban CFD simulations ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Cossin, Marion, Schmidt, Pierre, Gilet, Flavie, Parent, Gerald, Menard, Anne-Laure, Mathieu, Yves et Wagnac, Eric.
2025.
« Reducing lumbar spine loading in Russian bar porters: A case study ».
Sports Biomechanics.
Côté, Raphaël, Delbergue, Dorian, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien et Soulestin, Jérémie.
2025.
« Influence of process parameters on the occurrence of defects and dimensional properties of green part produced by material extrusion of highly filled polymer ».
Progress in Additive Manufacturing, vol. 10, nº 1.
pp. 409-425.
Côte, Raphaël, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien et Soulestin, Jérémie.
2025.
« Performance of different material extrusion 3D printing strategies in improving density and dimensional properties ».
International Journal of Advanced Manufacturing Technology, vol. 140, nº 7-8.
pp. 4045-4061.
Crockett, Benjamin, Yu, Hao, Montaut, Nicola, Sciara, Stefania, Chemnitz, Mario, Chu, Sai T., Little, Brent E., Moss, David J., Wang, Zhiming, Azaña, José et Morandotti, Roberto.
2025.
« Generalizing nonlocal dispersion cancelation for robust quantum communications ».
In Optical Fiber Communication Conference (OFC) (San Francisco, CA, USA, Mar. 30-Apr. 03, 2025)
Optical Society of America. Cui, Yi. 2025. « From Eshelby’s solution to topological derivatives in general elasticity theory ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Cunha, Baptiste et Seers, Patrice.
2025.
« Effect of EGR direct-injection on the resulting flow and stratification in a spark-ignition engine using CFD ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Czekanski, Aleksander. 2025. « 4D printing of PNIPAM-based hydrogels: Effects of crosslinking rates and thickness variations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Czekanski, Aleksander. 2025. « Optimizing anisotropy in 3D-printed polymers through topology and print direction strategies ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Czekanski, Aleksander et Etiwa, Ragab.
2025.
« Effect of raster angles on the anisotropic behavior of 3D-printed TPU under uniaxial and planar loading conditions ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Da Silva, A., Tascon, D., Valverde, A., Vergara, C., Montoya-Torres, J. R., Paternina-Arboleda, C. et Mejia, G.. 2025. « Leveraging blockchain technology to improve the global competitiveness of Colombia's cocoa supply chain ». Communication lors de la conférence : 28th International Conference on Production Research (ICPR 2025) (Bogota, Colombia, July 13-17, 2025).
da Silva, Paula Heloisa, Fischman, Adalberto, Scheer, Sergio et Melhado, Silvio Burrattino.
2025.
« The IPD contract methodology as a strategic element in the management of building projects ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 425-444.
Springer.
Da Silva, Samuel et Boton, Conrad.
2025.
« Digital integration in construction: A case study on common data environment implementation for a metro line project ».
Infrastructures, vol. 10, nº 10.
Daaji, Marwa, Benatia, Mohamed-Amin, Ouni, Ali et Gammoudi, Mohamed Mohsen.
2025.
« Predicting wind turbines faults using multi-objective genetic programming ».
Expert Systems with Applications, vol. 281.
Dabiran, Nastaran, Robinson, Brandon, Poirel, Dominique et Sarkar, Abhijit. 2025. « Sparse Bayesian physics-informed neural network model for nonlinear aeroelastic prediction ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Dadpour, Daryoush, Deymi-Dashtebayaz, Mahdi, Poncet, Sébastien, Agelin-Chaab, Martin, Hangan, Horia et Peerhossaini, Hassan.
2025.
« Energy, exergy, and exergoeconomic analyses of solar-powered cooling systems for data centers in Montreal: A comparative study of three phase change materials ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Dahli, Khadidja, Ilinca, Adrian, Benallal, Abdellah, Cheggaga, Nawal et Allaoui, Tayeb.
2025.
« Flocking-inspired solar tracking system with adaptive performance in varied environmental conditions ».
Energies, vol. 18, nº 8.
Dahmani, Jawad, Petit, Yvan et Laporte, Catherine.
2025.
« Ultrasound imaging dataset for elastography, deformation correction, and algorithm evaluation ».
In SPIE Medical Imaging 2025: Ultrasonic Imaging and Tomography (San Diego, CA, USA, Feb. 16-21, 2025)
Coll. « Proceedings of SPIE », vol. 13412.
SPIE.
Dai, Cheng, Bao, Song, Chen, Songlin, Garg, Sahil et Kaddoum, Georges.
2025.
« Precision-adaptive task offloading and resource allocation for efficient positioning and sensing in near-field IoV systems ».
IEEE Internet of Things Journal, vol. 12, nº 13.
pp. 22635-22646.
Dai, Cheng, He, Guangdong, Guo, Bing, Garg, Sahil, Kaddoum, Georges et Hassan, Mohammad Mehedi.
2025.
« Position-aware structural knowledge sharing-based federated graph learning for intelligent transportation systems ».
IEEE Transactions on Intelligent Transportation Systems.
Dai, Cheng, Wei, Shuai, Dai, Shengxin, Garg, Sahil, Kaddoum, Georges et Shamim Hossain, M..
2025.
« Federated self-supervised learning based on prototypes clustering contrastive learning for Internet-of-Vehicles applications ».
IEEE Internet of Things Journal, vol. 12, nº 5.
pp. 4692-4700.
Dai, Cheng, Xiang, Sha, Xie, Lipeng, Garg, Sahil, Kaddoum, Georges et Hassan, Mohammad Mehedi.
2025.
« An improved nonlinear precoding scheme in multicarrier signaling optimization for transportation networks applications ».
IEEE Transactions on Intelligent Transportation Systems.
Dang, Do et Nguyen, Kim Khoa.
2025.
« Joint multicast application-group mapping and rendezvous point selection for multi-tenancy data center networks ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 892-897.
Institute of Electrical and Electronics Engineers Inc..
Danish, Syed Muhammad, Hameed, Aroosa, Ranjha, Ali, Srivastava, Gautam et Zhang, Kaiwen.
2025.
« Block-FeDL: Electric vehicle charging load forecasting using federated learning and blockchain ».
IEEE Transactions on Vehicular Technology, vol. 74, nº 2.
pp. 2048-2056.
Daoud, Ahmed, Oukassi, Hedir, Aidibe, Ali et Yacout, Soumaya.
2025.
« Cyber-physical system architecture for real-time warehouse operations ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Daoust, Élie, Ahmadi, Ali, Soulez, Gilles et Lerouge, Sophie. 2025. « Optimisation des propriétés mécaniques des fantômes vasculaires pour des tests in vitro réalistes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Dar, Afzal Ahmed, Chen, Zhi, Zhang, Gaixia, Hu, Jinguang, Zaghib, Karim, Deng, Sixu, Wang, Xiaolei, Haghighat, Fariborz, Mulligan, Catherine N., An, Chunjiang, Ramirez, Antonio Avalos et Sun, Shuhui.
2025.
« Sustainable extraction of critical minerals from waste batteries: A green solvent approach in resource recovery ».
Batteries, vol. 11, nº 2.
Daraghmeh, Mustafa, Agarwal, Anjali, Jararweh, Yaser et Kaur, Kuljeet.
2025.
« Machine learning-based IoT cyber threat prediction using network traffic analysis ».
In 10th International Conference on Fog and Mobile Edge Computing (FMEC) (Tampa, FL, USA, May 19-22, 2025)
pp. 163-170.
Institute of Electrical and Electronics Engineers Inc..
Daraghmeh, Mustafa, Obaidat, Islam, Jararweh, Yaser, Agarwal, Anjali et Kaur, Kuljeet.
2025.
« A device-centric and temporal learning framework for malicious IoT traffic detection ».
In 5th Intelligent Cybersecurity Conference (ICSC) (Tampa, FL, USA, May 19-22, 2025)
pp. 130-136.
Institute of Electrical and Electronics Engineers Inc..
Darif, Ikram, Abdellatif, Manel et El boussaidi, Ghizlane.
2025.
« On the migration of legacy systems to an event-driven architecture: A survey ».
In IEEE 49th Annual Computers, Software, and Applications Conference (COMPSAC) (Toronto, ON, Canada, July 08-11, 2025)
pp. 1260-1269.
Institute of Electrical and Electronics Engineers Inc..
Darif, Ikram, El Boussaidi, Ghizlane et Kpodjedo, Sègla.
2025.
« On the automated generation of UI for template-based requirements specification ».
In IEEE/ACM Workshop on Multi-disciplinary, Open, and RElevant Requirements Engineering (MO2RE) (Ottawa, ON, Canada, Apr. 27, 2025)
pp. 10-16.
Institute of Electrical and Electronics Engineers Inc..
Darif, Ikram, El boussaidi, Ghizlane et Kpodjedo, Sègla.
2025.
« Requirements specification using templates: a model-driven approach ».
Software and Systems Modeling.
Darif, Ikram, El Boussaidi, Ghizlane, Kpodjedo, Sègla, Padmanabhan, Pratibha et Paz, Andrés.
2025.
« On the generation of input space model for model-driven requirements-based testing ».
In International Conference on Model-Driven Engineering and Software Development (Porto, Portugal, Feb. 26-28, 2025)
pp. 250-262.
Science and Technology Publications, Lda.
Darif, Ikram, El boussaidi, Ghizlane, Kpodjedo, Sègla et Paz, Andrés.
2025.
« UTL: A Unified Language for Requirements Templates ».
In SAC '25: Proceedings of the 40th ACM/SIGAPP Symposium on Applied Computing (Catania, Italy, Mar. 21-Apr. 04, 2025)
pp. 1489-1498.
Association for Computing Machinery.
Darvishmotevally, Parisa, Saadati, Mohammad, Cormier, Jonathan et Jahazi, Mohammad.
2025.
« Morphology evolution of plate-like precipitates in a polycrystalline Ni-based superalloy ».
Journal of Alloys and Compounds, vol. 1040.
Davidson-Chaput, Jonathan, Arsenault, Richard, Martel, Jean-Luc et Troin, Magali.
2025.
« Value of various elements of the hydrological forecasting chain: Is there a successful pathway for improving the overall performance? ».
Journal of Hydrology, vol. 658.
Davla, Shikhar, Tsai, Scott et Ghasemi, Abbas. 2025. « Multi-phase simulations of ultra-low interfacial tension all-aqueous droplets in microfluidics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
de Amorim, Lucas B. V., Cavalcanti, George D. C. et Cruz, Rafael M. O..
2025.
« Meta-scaler: A meta-learning framework for the selection of scaling techniques ».
IEEE Transactions on Neural Networks and Learning Systems, vol. 36, nº 3.
pp. 4805-4819.
de Assis, Rodrigo Furlan, de Paula Ferreira, William et Ouhimmou, Mustapha.
2025.
« Order picking dataset from a warehouse of a footwear manufacturing company ».
Data in Brief, vol. 61.
de Carvalho Arjona, Jéssica, Samara, Mazen, Ulsen, Carina, Valenzuela Diaz, Francisco Rolando et Demarquette, Nicole Raymonde.
2025.
« Isoniazid adsorption and release by Cloisite and Laponite: An effect of surface charge ».
Materials Chemistry and Physics, vol. 344.
de Carvalho Arjona, Jessica, Ulsen, Carina, Tada, Dayane, Valenzuela Diaz, Francisco Rolando et Demarquette, Nicole Raymonde.
2025.
« The influence of adsorption incorporation mechanism on the release of isoniazid by montmorillonite ».
Journal of Drug Delivery Science and Technology, vol. 108.
de Faria, Victor Castro Nacif, Cruz, Rafael M. O., Sabourin, Robert et Lorena, Ana Carolina.
2025.
« Optimizing view generation in classification datasets ».
In International Joint Conference on Neural Networks (IJCNN) (Rome, Italy, June 30-July 05, 2025)
Institute of Electrical and Electronics Engineers Inc..
De La Cruz Sanchez, Berith Atemoztli, Kwiatkowski, Jennifer et Roberge, Jean-Philippe.
2025.
« Tactile contact patterns for robotic grasping: A dataset of real and simulated data ».
In 3rd International Conference on Control and Robot Technology (ICCRT) (Singapore, Singapore, Apr. 16-18, 2025)
pp. 8-13.
Institute of Electrical and Electronics Engineers Inc..
De la Cruz Sánchez, Berith Atemoztli et Roberge, Jean-Philippe.
2025.
« A hybrid elastic-hyperelastic approach for simulating soft tactile sensors ».
Frontiers in Robotics and AI, vol. 12.
de Moura, Kecia Gomes, Cruz, Rafael Menelau O. et Sabourin, Robert.
2025.
« Offline handwritten signature verification using a stream-based approach ».
In Pattern Recognition : 27th International Conference, ICPR 2024, Proceedings, Part XXXI (Kolkata, India, Dec. 01-05, 2024)
Coll. « Lecture notes in computer science », vol. 15331.
pp. 271-286.
Springer. Defrance, Estelle, Theysgeur, Sandy, Baudouin, Laurie-Anne, Clavijo, Erika, Dimitrov, Krasimir, Phalip, Vincent, Ravallec, Rozenn, Coucheney, Françoise et Choque, Elodie. 2025. « Adding value to the co-products of the Hauts-de-France region (endive) in compostable biosourced packaging formulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Deiminiat, Akram et Aubertin, Jonathan D..
2025.
« Conceptual analog for evaluating empirically and explicitly the evolving shear stress along active rockslide planes using the complete stress–displacement surface model ».
Geosciences, vol. 15, nº 4.
Delaire, Édouard, Vincent, Thomas, Cai, Zhengchen, Machado, Alexis, Hugueville, Laurent, Schwartz, Denis, Tadel, François, Cassani, Raymundo, Bherer, Louis, Lina, Jean-Marc, Pélégrini-Issac, Mélanie et Grova, Christophe.
2025.
« NIRSTORM: a Brainstorm extension dedicated to functional near-infrared spectroscopy data analysis, advanced 3D reconstructions, and optimal probe design ».
Neurophotonics, vol. 12, nº 2.
Delazeri, Bruna Rossetto, Hochuli, Andre Gustavo, Barddal, Jean Paul, Lameiras Koerich, Alessandro et Britto, Alceu de Souza.
2025.
« Representation ensemble learning applied to facial expression recognition ».
Neural Computing and Applications, vol. 37, nº 1.
pp. 417-438. Delbari, Seyed Ali et Hof, Lucas A.. 2025. « The impact of ion-exchange treatment on the degradation behavior of aluminosilicate glass ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Demasi, Joseph, Bailly, Nicolas, Wei, Wei, Thollon, Lionel et Arnoux, Pierre-Jean. 2025. « Improving back protectors evaluation: Towards a more realistic certification approach? ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Deng, Guang C., Baba, Satoshi, Ben-Gida, Hadar, Lavoie, Philippe et Moreau, Stéphane.
2025.
« Computational investigation of strain-vorticity interactions in wingtip vortex formation ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Deschamps, Jaril, Stolle, Jacob et Pham Van Bang, Damien.
2025.
« Negatively buoyant debris impact under tsunami-like flows ».
Journal of Waterway, Port, Coastal and Ocean Engineering, vol. 151, nº 6.
Deschamps, Jaril, Stolle, Jacob et Pham Van Bang, Damien.
2025.
« Negatively buoyant debris impact under tsunamis-like conditions ».
In Proceedings of the 38th International Conference on Coastal Engineering (ICCE) (Rome, Italy, Sept. 08-14, 2024)
Coll. « Coastal Engineering Proceedings », vol. 38.
Desrosiers, Catherine, Brika, Salah Eddine, Masson, Jean-René Poulin, Provencher, Benjamin, Cheriet, Farida, Piché, Nicolas, Brailovski, Vladimir et Guibaut, François. 2025. « Digital twin modeling for defect detection in LPBF parts: A case study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Desrosiers, Catherine, Letenneur, Morgan, Bernier, Fabrice, Piche, Nicolas, Provencher, Benjamin, Cheriet, Farida, Guibault, François et Brailovski, Vladimir.
2025.
« Automated porosity segmentation in laser powder bed fusion part using computed tomography: A validity study ».
Journal of Intelligent Manufacturing, vol. 36, nº 2.
pp. 1341-1361. Dharani, Bharathwaj et Mavriplis, Catherine. 2025. « Numerical investigation of flow dynamics over a multi-element airfoil in ground proximity ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
di Falco, Camille, Aissaoui, Rachid et Hagemeister, Nicola.
2025.
« Sensitivity analysis of an inertial calibration method: Influence of leg position on 3D knee kinematics ».
Gait and Posture, vol. 115.
pp. 51-58.
Di Giovanni, Daniel A., Kersten-Oertel, M., Drouin, S. et Collins, D. L..
2025.
« Assessment of cognitive load in the context of neurosurgery ».
International Journal of Computer Assisted Radiology and Surgery.
Di Labbio, Giuseppe, Hof, Lucas, Chaouki, Haitam et Lessard, Michel.
2025.
« AI-driven modelling of electrostatic powder coating: Data collection ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Di Lauro, Luigi, Sciara, Stefania, Fischer, Bennet, Dong, Junliang, Alamgir, Imtiaz, Wetzel, Benjamin, Genty, Goëry, Nichols, Mitchell, Eshaghi, Armaghan, Moss, David J. et Morandotti, Roberto.
2025.
« Optimization methods for integrated and programmable photonics in next-generation classical and quantum smart communication and signal processing systems ».
Advances in Optics and Photonics, vol. 17, nº 3.
pp. 526-622.
Diaz, Moises, Mendoza-García, Andrea, Ferrer, Miguel A. et Sabourin, Robert.
2025.
« A survey of handwriting synthesis from 2019 to 2024: A comprehensive review ».
Pattern Recognition, vol. 162.
Dickie-Wilsona, Cora, Rosettani, Joshua et Ahmed, Wael. 2025. « Optimizing two-phase flow dynamics in bubble column reactors and airlift pumps: Insights into mixing efficiency and fluid density effects ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Dionne, Antoine, Magnuson, David, Richard-Denis, Andréane, Petit, Yvan, Barthélémy, Dorothy, Bernard, Francis et Mac-Thiong, Jean-Marc.
2025.
« Early exercise therapy in patients with severe traumatic spinal cord injury: Is it feasible in the ICU? ».
Critical Care, vol. 29, nº 1.
Dionne, Antoine, Magnuson, David, Richard-Denis, Andreane, Petit, Yvan, Barthélémy, Dorothy, Bernard, Francis et Mac-Thiong, Jean-Marc.
2025.
« Safety and feasibility of early activity-based therapy following severe traumatic spinal cord injury: Results from a single-arm pilot trial ».
Journal of Neurotrauma, vol. 42, nº 3-4.
Diotalevi, Lucien, Léger, Pauline, Beauséjour, Marie-Hélène, Mac-Thiong, Jean-Marc et Petit, Yvan. 2025. « Trained nnU-Net model for semantic segmentation of human adult cervical vertebrae from CT-Scans ». Affiche présentée lors de la conférence : 47th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Copenhagen, Denmark, July 14-18, 2025).
Diotalevi, Lucien, Léger, Pauline, Beauséjour, Marie-Hélène, Mac-Thiong, Jean-Marc et Petit, Yvan.
2025.
« Trained nnU-Net model for semantic segmentation of human adult cervical vertebrae from CT-Scans ».
In 47th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Copenhagen, Denmark, July 14-18, 2025)
Institute of electrical and Electonics Engineers Inc.. Djefour, Djoher, Nadeau, S. et Landau, K.. 2025. « Analyse des interfaces homme-outil : comprendre les paramètres clés de ces interfaces - étude exploratoire avec un gant de données (VMG30) ». Communication lors de la conférence : Congrès annuel AQHSST (Drummondville, QC, Canada, 21-22 mai 2025).
Djefour, Djoher, Nadeau, Sylvie et Landau, Kurt.
2025.
« Digital Human Modeling for long, and low-volume assembly processes: Gas turbine assembly case study ».
Open Journal of Safety Science and Technology, vol. 15, nº 3.
Djeulezeck Tanegue, Hermann Boris, De Paula Ferreira, William, De Assis, Rodrigo Furlan et Brodeur, David.
2025.
« Leveraging virtual commissioning for digital twins: An example case ».
[Article de conférence]. IFAC-PapersOnLine, vol. 59, nº 10.
pp. 601-606.
Doan, Khai, Avgeris, Marios, Leivadeas, Aris, Lambadaris, Ioannis et Shin, Wonjae.
2025.
« Cooperative learning-based framework for VNF caching and placement optimization over low earth orbit satellite networks ».
IEEE Transactions on Vehicular Technology, vol. 74, nº 3.
pp. 4758-4773.
Dong, Fang, Chen, Zhangsen, Chen, Ning, Zhang, Gaixia et Sun, Shuhui.
2025.
« Atomic layer deposition-modified bifunctional electrocatalysts for rechargeable zinc-air batteries: Boosting activity and cycle life ».
Advanced Energy Materials.
Dong, Fang, Wu, Mingjie, Chen, Zhangsen, Chen, Ning, Bakhtbidar, Mohammad, Ruediger, Andreas, Zhang, Gaixia et Sun, Shuhui.
2025.
« In situ reconstruction of bimetallic heterojunctions encapsulated in N/P co-doped carbon nanotubes for long-life rechargeable zinc-air batteries ».
Nano Energy, vol. 133.
Dors, Thomas M. R. et Groth, Clinton P. T..
2025.
« Large-eddy simulation of low- and high-speed turbulent flows using a high-order CENO finite-volume scheme ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Dorugade, Darshan Vishnu, Rakheja, Subhash, Boileau, Paul-Émile, Zheng, Zhou et Yao, Yumeng.
2025.
« Analysis of influence air spring mount bending on seat suspension performance ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Dos Santos Ribalonga Bassir, Eléonore, Zhuldybina, Mariia et Guérineau, Julia. 2025. « Exploration des pratiques d’écoconception et d’économie circulaire dans le développement des objets connectés : Analyse et étude de terrain dans le milieu entrepreneurial québécois ». Communication lors de la conférence : Symposium CERIEC (Montréal, QC, Canada, 4 avril 2025).
Dos Santos, Marcela Gonçalves, Hallé, Stéphane et Petrillo, Fabio.
2025.
« Mutation testing for industrial robotic systems ».
In Proceedings of the seventh International Workshop on Formal Methods for Autonomous Systems (FMAS 2025) (Paris, France, Nov. 17-19, 2025)
Coll. « Electronic Proceedings in Theoretical Computer Science (EPTCS) », vol. 436.
pp. 31-47.
Open Publishing Association.
Doty, H. W., Ammar, H. R., Samuel, A. M., Samuel, F. H. et Songmene, V..
2025.
« Effect of La and Ce addition on the microstructural characteristics and tensile properties of 220 and 356.1 alloys ».
International Journal of Metalcasting.
Doty, H. W., Ammar, H. R., Samuel, A. M., Songmene, V. et Samuel, F. H..
2025.
« Effect of alloy composition, solidification rate, porosity level, grain refining and modification on the performance of aluminum-based alloys ».
Journal of Materials Engineering and Performance.
Doty, H. W., Hernandez-Sandoval, J., Ammar, H. R., Songmene, V. et Samuel, F. H..
2025.
« Determination of Young's modulus in aluminum alloys: Role of precipitates, dispersoids, and intermetallics ».
Journal of Materials Research and Technology, vol. 37.
pp. 3549-3562.
Doty, H. W., Samuel, E., Samuel, A. M., Elsharkawi, E., Songmene, V. et Samuel, F. H..
2025.
« Effect of mischmetal concentration and superheating on the microstructure and tensile properties A319.1: Role of Fe content ».
Journal of Materials Research and Technology, vol. 35.
pp. 51-66.
Doty, Herbert W., Samuel, Ehab, Samuel, Agnes M., Songmene, Victor et Samuel, Fawzy H..
2025.
« Effect of melt treatment and heat treatment on the performance of aluminum cylinder heads ».
Materials, vol. 18, nº 5.
Doty, Herbert, Samuel, Ehab, Samuel, Agnes M., Elsharkawi, Ehab, Songmene, Victor et Samuel, Fawzy H..
2025.
« Effect of Fe concentration and superheating on the microstructure and tensile properties of high Mg 413.0-Type Alloys: Role of Sr, Be, P, and La ».
Materials, vol. 18, nº 2.
Dou, Hongwen et Zhang, Kun. 2025. « An integrated physical and data-driven model for a chiller evaporator ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Dou, Hongwen et Zhang, Kun.
2025.
« Transfer learning for cross-building forecasting of building energy and indoor air temperature in model predictive control applications ».
Journal of Building Engineering, vol. 111.
Dou, Hongwen, Zhang, Kun et Zmeureanu, Radu.
2025.
« Grey-box models of chiller evaporator for practical integration in building automation systems ».
Science and Technology for the Built Environment.
Douik, Helmi, Chaabane, Amin et Hof, Lucas. 2025. « Development of a method for comparing the similarity of CAO 3D models ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Doumbia, Cheick, Rousseau, Alain N., Başağaoğlu, Hakan, Baraer, Michel et Chakraborty, Debaditya.
2025.
« Interpretation of glacier mass change within the Upper Yukon Watershed from GRACE using Explainable Automated Machine Learning Algorithms ».
Journal of Hydrology, vol. 651.
Doutres, Olivier, Luan, Yu, Cyr-Desroches, Marc-Olivier, Carillo, Kévin, Richert, Robin et Sgard, Franck.
2025.
« On the design of an acoustical test fixture for assessing the objective occlusion effect ».
Applied Acoustics, vol. 228.
Drai, Jeffrey et Czekanski, Aleksander.
2025.
« A bibliometric examination of the existing knowledge framework and advancements in vascular network engineering ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Drai, Jeffrey et Czekanski, Aleksander.
2025.
« Exploring challenges and solutions in hydrogel failure and fracture mechanics for advancing vascular tissue engineering ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Du, Haoran, Savory, Eric et Perret, Laurent.
2025.
« Characteristics of street canyon flow using large-eddy simulation with a drag-porosity modelled atmospheric boundary layer ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Dubé, William et Houde, Sébastien. 2025. « Numerical simulation study of the blockage effect on the hydrodynamics of a Francis turbine at best efficiency point and partial load ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Dufour, Muriel, Arroyo, Paulina et Montecinos, Julio.
2025.
« Navegando control y desempeño en ONGs de emergencia: El rol fundamental de la rendición de cuentas ».
Academia Revista Latinoamericana de Administracion, vol. 38, nº 2.
pp. 209-232. Dumais, Keanna, Biglarbegian, Mohammad et Garces, Irina. 2025. « Fully 3D printed tactile pressure sensor ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Dumitru, Dorian Stefan, Tabiai, Ilyass et Melancon, David. 2025. « Deployable composite panel for the electromagnetic deorbitation of satellites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Dumont, Antoine, Gagnon, Jean-Philippe et Klitschke, Silke. 2025. « High-speed thermal infrared analysis of Portevin-Le Chatelier effect in AlMg alloys ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Dupeyroux, Lisa, Wheatley, Sydney, Rodger, Melanie, Lerouge, Sophie, Maurice, Corinne et Ahmadi, Ali. 2025. « Microencapsulation of intestinal bacteria: Impact of RGD on cell activity ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Dupuis Desroches, Julien, Ménard, Pierre André et Ratté, Sylvie. 2025. « Évaluation détaillée des modèles multilingues pour la transcription des phénomènes langagiers aphasiques ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 5-9 mai 2025). Durand, Sullivan, Haillot, Didier et Rousse, Daniel. 2025. « Stockage d’énergie par pompage thermique multi-énergétique dans un contexte minier nordique ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).
Durand, Sullivan, Neveu, Pierre, Rousse, Daniel R. et Haillot, Didier.
2025.
« Comparative study of the discharge architecture for a multi-energy pumped thermal energy storage system using finite dimension thermodynamics ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Durand, Sullivan, Turcotte, Patrick, Haillot, Didier, Rousse, Daniel, Arasteh, Hossein, Kalivogui, Siba, Zhang, Kun, Izquierdo, Ricardo, Merabtine, Abdelatif, Maref, Wahid et Ilinca, Adrian.
2025.
« Decarbonization strategies for northern Canada: A review of renewable energy and energy storage in off-grid communities ».
Energy Conversion and Management: X, vol. 27.
Dussault, Benoit, St-Amant, Yves et Houde, Sébastien. 2025. « Experimental investigation of non-trivial runner-casing interaction in a simplified hydraulic machine ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Dutta, Arnab, Torabi, Hadis et Behzadfar, Ehsan.
2025.
« Rheological behavior of starch-grafted itaconic acid co-acrylamide polymers ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Dutta, Taposhree, Safinezhad, Atefe, Zhuldybina, Mariia, Garro, Ignacio Llamas, Velázquez-González, Jesus Salvador, Sharma, Auj K., Ung, Bora et Mishra, Satyendra K..
2025.
« Advances in integrated quantum photonics for quantum sensing and communication ».
Journal of Materials Chemistry C, vol. 13, nº 23.
pp. 11521-11561.
Duval, Hélène, Rochette, Audrey, Dussault, Geneviève et St-Onge, David.
2025.
« Exploring the interplay of swarm robotics and choreography to nourish expressivity and construction of meaning for humans ».
In
Robot Theater.
Routledge.
Duverger, James Elber, Bellemin, Victor, Renaud Dumoulin, Geordi-Gabriel, Forcier, Patricia, Decaens, Justine, Gagnon, Ghyslain et Saidi, Alireza.
2025.
« Respiratory monitoring with textile inductive electrodes in driving applications: Effect of electrode’s positioning and form factor on signal quality ».
Sensors, vol. 25, nº 7.
Duverger, James Elber, Renaud Dumoulin, Geordi-Gabriel, Bellemin, Victor, Forcier, Patricia, Decaens, Justine, Gagnon, Ghyslain et Saidi, Alireza.
2025.
« Cardiac monitoring with textile capacitive electrodes in driving applications: Characterization of signal quality and RR duration accuracy ».
Sensors, vol. 25, nº 19.
Ebrahimi, Seyyedeh, Rönnqvist, Mikael, Ouhimmou, Mustapha et Stuart, Paul.
2025.
« A systematic literature review of the logistics planning for sustainable bioenergy based on Forestry, Agricultural, and municipal solid waste value chains ».
Energy Conversion and Management: X, vol. 27.
Ebrahimi-Tirtashi, Ali et Ahmadi, Keivan. 2025. « Bayesian updating of discrete-time domain model of chatter in milling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Eddine, Mohamadi Houssem, Lahlou, Laaziz, Gherbi, Abdelouahed et Kara, Nadjia.
2025.
« Seraph: a stochastic operational approach for the deployment of multi-antenna UAV-assisted networks ».
Cluster Computing, vol. 28, nº 6.
El Amine Meguenani, Mohamed, De Souza Britto, Alceu et Lameiras Koerich, Alessandro.
2025.
« Music genre classification using large language models ».
In IEEE Symposium on Computational Intelligence in Image, Signal Processing and Synthetic Media (CISM) (Trondheim, Norway, Mar. 17-20, 2025)
Institute of Electrical and Electronics Engineers Inc..
El Bechari, Soufiane, Bouillass, Ghada, Yannou, Bernard, Saidani, Michael, Volanschi, Alexandru et Heidsieck, Robert.
2025.
« Measuring and enhancing circularity of the healthcare sector: The circularity model of products and spare parts ».
In Human-Centred Technology Management for a Sustainable Future: Volume 3: Innovation Management for Sustainability and Resilience, Proceedings of the 33rd IAMOT Conference 2024 (Porto, Portugal, July 08-11, 2024)
Coll. « Springer Proceedings in Business and Economics »
pp. 217-228.
Springer Nature.
El Hamrani, Mouna, Benjelloun, Khalid, Kenne, Jean-Pierre, Maarouf, Saad et Elkhouakhi, Mohamed.
2025.
« Advanced predictive process control for industrial thickeners ».
In Proceedings of the International Conference on Simulation and Modeling Methodologies, Technologies and Applications (Bilbao, Spain, June 11-13, 2025)
pp. 262-269.
SciTePress.
El Khoury, Karim, Zanella, Maxime, Gérin, Benoît, Godelaine, Tiffanie, Macq, Benoît, Mahmoudi, Saïd, De Vleeschouwer, Christophe et Ben Ayed, Ismail.
2025.
« Enhancing remote sensing vision-language models for zero-shot scene classification ».
In IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) (Hyderabad, India, Apr. 06-11, 2025)
Institute of Electrical and Electronics Engineers Inc..
El Mestari, Wahiba, Cheggaga, Nawal, Adli, Feriel, Benallal, Abdellah et Ilinca, Adrian.
2025.
« Tuning parameters of genetic algorithms for wind farm optimization using the design of experiments method ».
Sustainability, vol. 17, nº 7.
El-Emary, Mohamed, Naboulsi, Diala et Stanica, Razvan.
2025.
« Energy efficient and resilient task offloading in UAV-assisted MEC systems ».
IEEE Open Journal of Vehicular Technology, vol. 6.
pp. 2236-2254.
El-Emary, Mohamed, Ranjha, Ali, Naboulsi, Diala et Stanica, Razvan.
2025.
« Toward energy efficiency and fairness in UAV-based task offloading ».
IEEE Access, vol. 13.
pp. 115178-115195. El-Ghotmi, Osman et Mcdonald, James. 2025. « A GPU-based high-order discontinuous-Galerkin-Hancock method with adaptive mesh refinement ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Elhemmali, Alaaeddin, Huque, Mohammad Mojammel, Imtiaz, Syed, Azizur-Rahman, Mohammad et Ahmed, Salim.
2025.
« Experimental validation of pressure drop in turbulent annular flow using CFD and physical informed neural networks ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Eljarray, Oumayma, Dai, Hongliu, Chen, Zhangsen, Raja, Subhiksha, Li, Bojia, Cao, Siyi, Sun, Shuhui et Zhang, Gaixia.
2025.
« Ensuring battery safety in electric vehicles: Challenges, developments, and future perspectives ».
Small.
Elliot, Thomas, Goldstein, Benjamin et Charlebois, Sylvain.
2025.
« Over 6 billion liters of Canadian milk wasted since 2012 ».
Ecological Economics, vol. 227.
Elloumi, Mohamed, Hassan, Md Zoheb et Kaddoum, Georges.
2025.
« Spectrum sharing in Internet-of-Vehicles networks: Digital twin-empowered proactive interference management approach ».
IEEE Transactions on Network and Service Management, vol. 22, nº 4.
pp. 3228-3248.
Elloumi, Mohamed, Kaddoum, Georges et Hassan, Md Zoheb.
2025.
« Digital twin-empowered interference management for multi-hop Internet-of-Vehicles networks over millimeter wave bands ».
IEEE Internet of Things Journal, vol. 12, nº 11.
pp. 17807-17827.
El-Sayyah, Mahmoud, Saad, Mohamad R. et Saad, Maarouf.
2025.
« Nonlinear model predictive control for trajectory tracking of omnidirectional robot using resilient propagation ».
IEEE Access, vol. 13.
pp. 112642-112653. Elserfy, Khalid, Elserfy, Zeineldin et Nemitallah, Medhat. 2025. « Performance and emissions characteristics of an intensified membrane reactor for steam methane reforming and H? separation/in-situ combustion for power generation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Elsharqawy, Mostafa. 2025. « CFD investigation of heat recovery ventilation systems with integrated thermal energy storage for energy-efficient homes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Elzein, Serena et Duong, Luc.
2025.
« Reinforcement learning for navigation in percutaneous coronary arteries interventions ».
In SPIE Medical Imaging 2025: Image-Guided Procedures, Robotic Interventions, and Modeling (San Diego, CA, USA, Feb. 16-21, 025)
Coll. « Proceedings of SPIE », vol. 13408.
SPIE. Enama, Laurent Davy Ndzie, Kenne, Jean-Pierre et Gharbi, Ali. 2025. « AI applications in stochastic optimal control for production activity planning in manufacturing systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Ermagan, Hamidreza, Hoffmann, Jaap, Sasmito, Agus et Amiri, Leyla. 2025. « Experimental and numerical study on a pilot-scale high-grade rock bed thermal energy storage ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Ermagan, Hamidreza, Ivana, Ivana, Sasmito, Agus et Amiri, Leyla. 2025. « Pore-scale modelling of structured packed bed for application in rock thermal energy storage ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Eskandari, Shahin, Xu, Wanmin, Chen, Slight, Abali, Bilen Emek, Orsat, Valérie et Akbarzadeh, Abdolhamid. 2025. « Elastic wave propagation in chiral metamaterials ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Esmaeilifoomani, Kayvan, Roussinova, Vesselina et Stoilov, Vesselin. 2025. « Achieving super-hydrophobicity through mechanical surface patterning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Esmaeilkhah, Ahmad et Landry, René Jr..
2025.
« Estimation of the effect of single source of RF interference on an airborne global navigation satellite system receiver: A theoretical study and parametric simulation ».
Engineering Proceedings, vol. 88, nº 1.
Esmaeilkhah, Ahmad et Landry, René Jr..
2025.
« Spatial sensitivity of navigation using Signal-of-Opportunity (SoOP) from Starlink, Iridium-Next, GlobalStar, OneWeb, and Orbcomm Constellations ».
Engineering Proceedings, vol. 88, nº 1.
Espejo-Díaz, Julián Alberto, Alfonso-Lizarazo, Edgar et Montoya-Torres, Jairo R..
2025.
« Improving access to emergency medical services using advanced air mobility vehicles ».
Flexible Services and Manufacturing Journal, vol. 37, nº 4.
pp. 1060-1092.
Fakour, Mehdi et Poirier, Erik Androw.
2025.
« Exploring the potential of digital signature of building information models to improve trust, transparency, and traceability in construction projects ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 178-192.
Springer.
Falchetto, Augusto Cannone, Hugener, Martin, Wang, Di, Porot, Laurent, De Maeijer, Patricia Kara, Orešković, Marko, Sa-da-Costa, Margarida, Tabatabaee, Hassan, Bocci, Edoardo, Kawakami, Atsushi, Hofko, Bernhard, Grilli, Andrea, Pasquini, Emiliano, Pasetto, Marco, Zhai, Huachun, Soenen, Hilde, Van den Bergh, Wim, Cardone, Fabrizio, Carter, Alan, Vasconcelos, Kamilla, Carbonneau, Xavier, Dave, Eshan et Tebaldi, Gabriele.
2025.
« Asphalt binder for recycled asphalt mixtures ».
In
Recycling asphalt pavement: State-of-the-art of the RILEM technical committee 264-RAP.
Coll. « RILEM State-of-the-Art Reports », vol. 44.
pp. 117-145. Springer.
Fan, Zichen, Hadizade, Amin, Degroot, Christopher et Savory, Eric.
2025.
« Characterization of cough mouth opening for accurate CFD boundary conditions ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Farahani, Mehrad Artkeli et Morency, François. 2025. « Effects of numerical and physical parameters on SPH models using LiDAR-based dam-break flood simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Faramarzi, Mohsen et Taghavi, Seyed Mohammad.
2025.
« Buoyant miscible suspension fluid injection into a closed-end pipe ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Farazmandnia, Navid et Ilinca, Adrian.
2025.
« Recyclable wind turbine blades: A life cycle analysis ».
Materials, vol. 18, nº 16.
Farhat, Mahmoud, Kali, Yassine, Saad, Maarouf, Rahman, Mohammad Habibur et Lopez-Herrejon, Roberto E..
2025.
« New fixed-time observer-based model-free fixed-time sliding mode of joint angle commanded NAO humanoid robot ».
IEEE Transactions on Control Systems Technology, vol. 33, nº 1.
pp. 304-315.
Farjallah, Rania, Selim, Bassant, Jaumard, Brigitte, Ali, Samr et Kaddoum, Georges.
2025.
« Evaluation of missing data imputation for time series without ground truth ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 6347-6352.
Institute of Electrical and Electronics Engineers Inc..
Farooq, Umar, Hameed, Aroosa, Leivadeas, Aris et Lambadaris, Ioannis.
2025.
« Transformer-based link failure detection in 5G cellular networks ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 1906-1911.
Institute of Electrical and Electronics Engineers Inc..
Farshbaf-Roomi, Farnam, Shoaei, Aran et Wang, Qingsong.
2025.
« Multi-objective design optimization of multi-layer hybrid magnet PMSM considering irreversible demagnetization conditions ».
In IEEE 34th International Symposium on Industrial Electronics (ISIE) (Toronto, ON, Canada, June 20-23, 2025)
Institute of Electrical and Electronics Engineers Inc..
Farshbaf-Roomi, Farnam, Shoaei, Aran, Zhu, Jianguo et Wang, Qingsong.
2025.
« High-dimensional optimal design of dual-rotor synchronous reluctance machines based on data-driven torque decomposition ».
IET Electric Power Applications, vol. 19, nº 1.
Farzam, Ramin, Azad, Mohammad Hasan, Moghaddam, Hamid Abrishami et Forouzanfar, Mohamad.
2025.
« Beat-to-beat oscillometric blood pressure estimation: A bayesian approach with system identification ».
IEEE Transactions on Biomedical Engineering, vol. 72, nº 2.
pp. 619-629.
Fathollahi, Arman, Gheisarnejad, Meysam, Sharifzadeh, Mohammad, Laurendeau, Eric, Andresen, Björn et Al-Haddad, Kamal.
2025.
« On-policy machine learning based-disturbance rejection control for grid-tied PEC9 inverter under parameters mismatch and distorted grid voltage ».
IEEE Transactions on Emerging Topics in Computational Intelligence.
Fattah, Rachid, Kenne, Jean-Pierre, Benjelloun, Khalid et Chebak, Ahmed.
2025.
« Optimization of sliding mode control parameters to improve passenger comfort, road handling and reduce chattering in active electrohydraulic suspension systems ».
In International Conference on Control, Automation and Diagnosis (ICCAD) (Barcelona, Spain, July 01-03, 2025)
Institute of Electrical and Electronics Engineers Inc..
Fattah, Rachid, Kenne, Jean-Pierre, Benjelloun, Khalid et Chebak, Ahmed.
2025.
« Optimization of the backstepping control parameters of an active electrohydraulic suspension to improve passenger comfort and road handling ».
IEEE Access, vol. 13.
pp. 35985-36005. Favrel, Arthur et Dollon, Quentin. 2025. « Bayesian approach for real-time parameters inference of unsteady cavitating flows in hydroelectric turbines ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Fawaz, Amani, Mougahrbel, Imad, Al-Haddad, Kamal et Kanaan, Hadi Y..
2025.
« Graph/game theory-based energy routing methods in the Energy Internet: A review ».
IEEE Industrial Electronics Magazine, vol. 19, nº 3.
pp. 20-39.
Fawaz, Amani, Mougharbel, Imad, Al-Haddad, Kamal et Kanaan, Hadi Y..
2025.
« Energy routing protocols for Energy Internet: A review on multi-agent systems, metaheuristics, and Artificial Intelligence approaches ».
IEEE Access, vol. 13.
pp. 41625-41643.
Feki, Hatem, Abdellatif, Manel et Sayagh, Mohammed.
2025.
« An empirical study on Hugging Face trends, topics and challenges on stack overflow ».
In IEEE 49th Annual Computers, Software, and Applications Conference (COMPSAC) (Toronto, ON, Canada, July 08-11, 2025)
pp. 1297-1307.
Institute of Electrical and Electronics Engineers Inc..
Fenton, Erin et El-Sayegh, Zeinab.
2025.
« Modeling and analyzing tire-salted pavement interaction using advanced computational techniques ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ferreira Junior, José Carlos, Triki, Ennouri, Doutres, Olivier, Demarquette, Nicole R. et Hof, Lucas A..
2025.
« Recyclable polyester textile waste-based composites for building applications in a circular economy framework ».
Journal of Cleaner Production, vol. 515.
Ferry, Julien, Aivodji, Ulrich, Gambs, Sébastien, Huguet, Marie-José et Siala, Mohamed.
2025.
« Taming the triangle: On the interplays between fairness, interpretability, and privacy in machine learning ».
Computational Intelligence, vol. 41, nº 4.
Filali, Abderrahime, Naboulsi, Diala et Kaddoum, Georges.
2025.
« Enhancing RAN slicing isolation and UAV positioning in tactical networks with DRL ».
In International Wireless Communications and Mobile Computing (IWCMC) (Abu Dhabi, UAE, May 12-16, 2025)
pp. 1247-1252.
Institute of Electrical and Electronics Engineers Inc.. Finta-Laurent, Lysandre, Guérineau, Julia, Terrier, Philippe et Rivest, Louis. 2025. « Comparaison de l’impact environnemental réalisé sous Sustainability de SolidWorks avec SimaPro lors de la phase de conception de pièces aéronautiques ». Communication lors de la conférence : Symposium CERIEC (Montréal, QC, Canada, 4 avril 2025).
Fiorucci, Tiziano, Walpen, Aurélien, Bosson, Nicolas, Catry, Guillaume et Noca, Flavio.
2025.
« UAVTakeoff, hover and landing test in real-world flight conditions within a laboratory setting ».
In AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum (Orlando, FL, USA, Jan. 06-10, 2025)
Coll. « AIAA Paper », vol. AIAA 2025-2420.
American Institute of Aeronautics and Astronautics Inc, AIAA.
Fischer, Fabrice et Gardoni, Mickaël.
2025.
« Comparing different ChatGPT4.0 generated oriented word suggestions as design fixation interferences for the ideation phase in design thinking ».
In Product Lifecycle Management. Leveraging AI, Digital Twins, and Smart Technologies: 21st IFIP WG 5.1 International Conference, PLM 2024, Revised Selected Papers Part II (Bangkok, Thailand, July 07-10, 2024)
Coll. « IFIP Advances In Information and Communication Technology », vol. 741.
pp. 207-219.
Springer.
Fischer, O., Lemaire, R., Carré, V., Hertzog, J., Mila-Saavedra, L. D., Brassard, P., Godbout, S., Palacios, J. et Bensakhria, A..
2025.
« Thermogravimetric analysis and kinetic modeling of the pyrolysis of different biomass types by thermochemical valorization of tomato plant residues: Characterization of the pyrolysis process through the coupling of TGA-based kinetic analyses and pilot-scale auger reactor tests ».
In 4th Journal of Thermal Analysis and Calorimetry Conference & 10th V4 (Joint Czech-Hungarian-Polish-Slovakian) Thermoanalytical Conference (Budapest , Hungary, June 24-27, 2025)
pp. 118-119.
Fischer, Olivier, Lemaire, Romain et Bensakhria, Ammar.
2025.
« Pyrolysis of spruce wood, wheat straw, switchgrass, miscanthus and swine manure using catalysts containing alkali and alkaline earth metals: Thermogravimetric analysis and kinetic modeling ».
Journal of Thermal Analysis and Calorimetry.
Floc'h, Arnaud Le, Hu, Nan, Suryadi, Alexandre et Herr, Michaela.
2025.
« Evolution of wall pressure and wall shear stress under adverse pressure gradients from attached to separated flows ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Florian, Kevin, Chemkhi, Mahdi, Merabtine, Abdelatif, Kauffmann, Julien et Lorente, Sylvie.
2025.
« Numerical analysis of nature-inspired advanced heat exchangers realizable through metal additive manufacturing ».
In International Conference of Numerical Analysis and Applied Mathematics: ICNAAM 2023 (Heraklion, Greece, Sept. 11-17, 2023)
Coll. « AIP Conference Proceedings », vol. 3315.
American Institute of Physics.
Foka, Gwladys Ornella Djuikom, Stanica, Razvan et Naboulsi, Diala.
2025.
« HGC-LSTM: A graph neural network-based model for HO forecasting in mobile networks ».
Computer Networks, vol. 270.
Forget, Zachary, Brochu, Myriam, Deschênes, Pierre-Antony et Paquet, Daniel. 2025. « Influence of variable amplitude loading on crack initiation in 410NiMo filler metal ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Forgues, Daniel, Beaulieu, Nicolas, Laurindo, Brenda Da Silva et Poirier, Érik.
2025.
« A framework for integrating 3P within TVD ».
In Annual Conference of the International Group for Lean Construction, IGLC (Osaka, Japan, June 02-08, 2025)
Coll. « IGLC », vol. 33.
pp. 211-221.
International Group for Lean Construction. Forgues, Francois, Allard, Benoit, Mcdonald, James G. et Ivan, Lucian. 2025. « A novel polydisperse Gaussian-moment model for the air dispersion of virus-laden aerosols ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Formont, Philippe, Jeannin, Hugo, Piantanida, Pablo et Ben Ayed, Ismail.
2025.
« A strong baseline for molecular few-shot learning ».
Transactions on Machine Learning Research, vol. 2025.
Forouzanfar, Mohamad, Sardooeinasab, Sepehr, Baker, Fiona C., Colrain, Ian M. et de Zambotti, Massimiliano.
2025.
« Tone-evoked sleep electroencephalographic slow oscillations as a function of peripheral rhythms: New insights into the brain–heart integration ».
Journal of Sleep Research.
Fortier, Francois-Xavier, Gerlein, Luis Felipe, Benavides-Guerrero, Jaime, Wadhwa, Arjun, Shah, Krunal, Taherian, Mohamad Hassan, Perrotton, Alexandre, Bolduc, Martin et Cloutier, Sylvain.
2025.
« Improving solder wettability atop screen-printed copper for flexible hybrid electronic circuit assembly ».
Flexible and Printed Electronics, vol. 10, nº 4.
Foula, Jaurelle Keugong, El-Saikaly, Georges et Abo-El-Ezz, Ahmad.
2025.
« Finite element modeling of shoring and reshoring system during construction of reinforced concrete multi-story buildings ».
In 2nd International Conference on Durability, Repair and Maintanance of Structures: Selected Contributions of DRMS 2025 (Porto, Portugal, Mar. 13-14, 2025)
Coll. « Proceedings in Engineering Mechanics »
pp. 15-26.
Springer Cham.
Foula, Jaurelle Keugong, El-Saikaly, Georges et Abo-El-Ezz, Ahmad.
2025.
« Numerical investigation on the influence of shoring stiffness on slab deflection with consideration of construction phase loading ».
In Proceedings of the 10th International Conference on Civil, Structural and Transportation Engineering (ICCSTE) (London, UK, July 17-19, 2025)
Avestia Publishing.
Fourmont, Paul, Cho, Eunsoo, Cloutier, Sylvain G. et Ross, Caroline A..
2025.
« Exchange Bias in La0.67Sr0.33MnO3/YFeO3 Ferromagnet/Antiferromagnet Multilayer Heterostructures ».
Small.
Francis, Adel. 2025. « Spatiotemporal mapping for buildings construction site planning and control ». Communication lors de la conférence : 20th conference of the International Society for Computing in Civil and Building Engineering (ICCCBE) (Montreal, QC, Canada, Aug. 25-28, 2024).
Francis, Adel et Miresco, Edmond.
2025.
« Spatiotemporal mapping for buildings construction site planning and control ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 735-741.
Springer.
Franco, Felipe M. et Czekanski, Aleksander.
2025.
« Impact analysis on non-planar 3D-printed FFF parts ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Franz, Claire, Saidani, Michael et Song, Hyeonik.
2025.
« Design for repairability: Scoring device repairability using topic modeling ».
Journal of Mechanical Design, vol. 147, nº 10.
Freitas de Araujo-Filho, Paulo, Kaddoum, Georges, Campelo, Divanilson R. et Zanchettin, Cleber.
2025.
« Safeguarding IoT networks with generative adversarial networks ».
In
Advanced machine learning for cyber-attack detection in IoT networks.
pp. 111-142. Elsevier. Frigaard, Ian. 2025. « Well cementing and reducing leakage ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Frigaard, Ian, Hajieghrary, Omid et Goral, Martyna. 2025. « Bubble migration towards damaged paths in a yield stress fluid ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Fritz, Joshua, Gordon, William, Oliva, Jennifer, Tutunea-Fatan, O. Remus et Bordatchev, Evgueni.
2025.
« Functional performance of rectangular riblet-structured surfaces in water-glycerol mixture: Effect of riblet height ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Frommweiler, Charles et Poirier, Erik.
2025.
« Facilitating the building commissioning process using building information modeling: An action-research project ».
Engineering, Construction and Architectural Management, vol. 32, nº 1.
pp. 601-620. Fu, Jinbin, Wang, Liangzhu Leon et Laurendeau, Eric. 2025. « Multi-GPU-based CityFFD solver for urban microclimate simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Fu, Ying, Tan, Shi, Kadoch, Michel, Zhong, Jinghua, Guo, Lifeng, Zhang, Yangan, Huang, Xiaohong et Yuan, Xueguang.
2025.
« Semantic-attention enhanced DSC-transformer for lymph node ultrasound classification and remote diagnostics ».
Bioengineering, vol. 12, nº 2.
Fukushima, Gaku, Grebe, Aurélie, Chartrand, David, Lepage, Jean-Félix et Brouillette, Martin. 2025. « Numerical analysis of carbon capture technology using supersonic flow ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Furtado, Lia Beatriz Gomes, Lamothe, Sébastien, de Oliveira, José Lucas Ferreira, Lachance-Tremblay, Éric, Babadopulos, Lucas Feitosa de Albuquerque Lima, Bastos, Juceline Batista dos Santos et Parente, Evandro Jr..
2025.
« Methodology for using LWD data at different curing times to assess on-site properties of cement-bitumen treated materials ».
Journal of Testing and Evaluation, vol. 53, nº 2.
Fyffe, Catriona L., Potter, Emily, Miles, Evan, Shaw, Thomas E., McCarthy, Michael, Orr, Andrew, Loarte, Edwin, Medina, Katy, Fatichi, Simone, Hellström, Rob, Baraer, Michel, Mateo, Emilio, Cochachin, Alejo, Westoby, Matthew et Pellicciotti, Francesca.
2025.
« Thin and ephemeral snow shapes melt and runoff dynamics in the Peruvian Andes ».
Communications Earth & Environment, vol. 6, nº 1.
Gabriel, Julie, Wagnac, Éric, Petit, Yvan, Haïat, Guillaume, Rosi, Giuseppe et Flouzat-Lachaniette, Charles-Henri. 2025. « Evaluation of pedicle screw primary stability using an instrumented hammer ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Gadelrab, Mahmoud, Elsaadany, Ahmed, Shams, Shoukry I., Elsaadany, Mahmoud et Gagnon, Ghyslain.
2025.
« Design and validation of hybrid couplers for satellite feed networks in Ka and QV bands ».
In International Telecommunications Conference (ITC-Egypt) (Cairo, Egypt, July 28-31, 2025)
pp. 291-296.
Institute of Electrical and Electronics Engineers Inc..
Gadelrab, Mahmoud, Osama, Ahmed, Shams, Shoukry I., Elsaadany, Mahmoud et Gagnon, Ghyslain.
2025.
« Coaxial-to-waveguide adapter using machine learning approach ».
In International Telecommunications Conference (ITC-Egypt) (Cairo, Egypt, July 28-31, 2025)
pp. 342-345.
Institute of Electrical and Electronics Engineers Inc..
Gadelrab, Mahmoud, Shams, Shoukry I., Elsaadany, Mahmoud et Gagnon, Ghyslain.
2025.
« Design of corrugated horn antenna for LEO satellite feeding system: Efficient hybrid optimization approach ».
IEEE Access, vol. 13.
pp. 92730-92739. Gaffran, Noah, Liu, Heng, Qi, Gang et Wowk, Diane. 2025. « Low-velocity impact damage characterization of composite facesheet sandwich panels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Gagnon, Caroline. 2025. « Design et justice sociale ». Communication lors de la conférence : Colloque Au-delà de l’innovation sociale : le design social? (Montréal, QC, Canada, 23-28 oct. 2025). Gagnon, Caroline. 2025. « La matérialité et le design ». Communication lors de la conférence : Séminaire IM-MATÉRIALITÉ DES TRANSITIONS (Sèvre, France, 2025). Gagnon, Caroline. 2025. « Perspectives matérielles et du paysage : le design pour la ville ». Communication lors de la conférence : Colloque Design et Nouvelles stratégies urbaines, paysagères et territoriales (Nantes, France, 07-08 oct. 2025). Gagnon, Martin, Mai, Vincent, Pham, Quang Hung Pham, Favrel, Arthur et Gauthier, Jean-Philippe. 2025. « In situ turbine startup optimisation using virtual sensors and active learning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Gahlawat, Vijeet, Aidibe, Ali, Pilani, Nekkunj, Saucier, Antoine et Yacout, Soumaya.
2025.
« A comparative analysis of Kafka and MQTT for real-time data streaming in cyber-physical warehouse system ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Gaillochet, Melanie, Noori, Mehrdad, Dastani, Sahar, Desrosiers, Christian et Lombaert, Herve.
2025.
« Prompt learning with bounding box constraints for medical image segmentation ».
IEEE Transactions on Biomedical Engineering.
Gallerand, Lucie, Legrand, Mathias, Panneton, Raymond, Leclaire, Philippe et Dupont, Thomas.
2025.
« Added nonlinear damping of homogenized fluid-saturated microperforated plates in Forchheimer flow regime ».
Journal of Sound and Vibration, vol. 606.
Gandubert, G., Nkeck, J. E., Lafreniere-Greig, J., Ropagnol, X., Mine, S., Murate, K. et Blanchard, F..
2025.
« Single-shot detection of terahertz waves generated with an oscillator laser ».
In Photonics North (PN) (Ottawa, ON, Canada, May 20-23, 2025)
IEEE.
Ganji, Mohammad J., Agelin-Chaab, Martin et Rosen, Marc A..
2025.
« Incorporating copper wire mesh into a PCM-based battery pack ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ganza, Carmel, Sahebari, Seyed Mahmoud Seyedi et Ziki, Jana Abou. 2025. « Investigating the influence of electrolyte composition and voltage signal shape on the surface texture in spark assisted chemical engraving (SACE) ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Garcia, Cristiano Mesquita, Abilio, Ramon, Koerich, Alessandro Lameiras, Britto, Alceu de Souza et Barddal, Jean-Paul.
2025.
« Concept drift adaptation in text stream mining settings: A systematic review ».
ACM Transactions on Intelligent Systems and Technology, vol. 16, nº 2.
Garcia, Cristiano Mesquita, Koerich, Alessandro Lameiras, de Souza Britto, Alceu et Barddal, Jean Paul.
2025.
« Improving sampling methods for fine-tuning SentenceBERT in text streams ».
In Pattern Recognition : 27th International Conference, ICPR 2024, Proceedings, Part XIX (Kolkata, India, Dec. 01-05, 2024)
Coll. « Lecture notes in computer science », vol. 15319.
pp. 445-459.
Springer. Garmroodi, Mohammad Reza Daneshvar et Karimfazli, Ida. 2025. « Fluid mechanics of mixing in a two-dimensional stirred: Regimes and mechanisms ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Garmroodi, Mohammad Reza Daneshvar et Karimfazli, Ida. 2025. « Localization mechanisms in mixing of yield-stress fluids ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Garon, Josua, Routier, Anne-Lise, Mélançon, David et Gosselin, Frédérick. 2025. « Wrinkling instability taught by brown algae: Morphogenesis of a kelp blade ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Gatto, Bernardo B., Mollinetti, Marco A. F., dos Santos, Eulanda M., Koerich, Alessandro L. et da Silva Junior, Waldir S..
2025.
« A novel genetic algorithm approach for discriminative subspace optimization ».
In Intelligent Systems : 34th Brazilian Conference, BRACIS 2024, Proceedings, Part I (Belém do Pará, Brazil, Nov. 17-21, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15412.
pp. 64-79.
Springer.
Gauthier, Jean-Philippe, Morissette, Jean-François et Lawrence, Michel.
2025.
« Assessment of risks related to hydraulic transients in the context of hydro turbine uprating using co-simulation ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Gauthier, Maxime. 2025. « Comparison of PIV measurements in the vaneless space of the TR-Francis turbine at speed-no-load to CFD simulation results ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Gauthier, Maxime et Rodriguez, Rigel Galvan. 2025. « Impact of RAG-induced concrete deformation on side chamber flow and on dynamic loading of a low head Francis turbine ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Gauthier, Mercedes, Polosa, Anna, Lina, Jean-Marc et Lachapelle, Pierre.
2025.
« Hilbert transform analysis of the mouse scotopic electroretinogram reveals two distinct bursts of oscillatory potentials with progressively dimmer flashes ».
Documenta Ophthalmologica, vol. 150.
pp. 1-15.
Gazran, Saba, Boukherroub, Tasseda et Rönnqvist, Mikael.
2025.
« Collaboration between carrier companies using truck platooning: An application in the forestry industry ».
INFOR : Information Systems and Operational Research.
Gendron, Frédérick, Gagné, Marie-Ève, Pietraszek, Tomasz et Hassan, Munzer.
2025.
« Challenges of design and construction of the Boulevard des Galeries d’Anjou overpass over Highway 40 in Montreal ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2024, Volume 13: Structural Engineering (Niagara Falls, ON, Canada, June 05-07, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 681.
pp. 43-54.
Springer.
Ghalati, Akbar Ravan, Nesreddine, Hakim, Lacey, Jay et Poncet, Sebastien.
2025.
« Scale-resolving simulation of a water jet pump ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ghandali, Shaghayegh (Sherry). 2025. « Sensor integration to create a digital twin framework of a pre-existing robot ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Gharsallah, Ghazi et Kaddoum, Georges.
2025.
« Multimodal collaborative perception for 6G V2X power and spectrum management ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 4209-4214.
Institute of Electrical and Electronics Engineers Inc..
Ghaseminasab, Mahsa, Carter, Alan et Vaillancourt, Michel.
2025.
« Evaluating the effectiveness of high thermal resistance aggregates in asphalt mixtures for Urban Heat Island (UHI) mitigation ».
Sustainable and Resilient Infrastructure.
Ghazy, Abdallah S., Kaddoum, Georges, Talhi, Chamseddine, Iqbal, Naveed et Hussein Muqaibel, Ali Hussein.
2025.
« Reinforcement learning-assisted secure reliable underwater wireless acoustic communications ».
IEEE Access, vol. 13.
pp. 180049-180068.
Gheisarnejad, Meysam, Fathollahi, Arman, Sharifzadeh, Mohammad, Laurendeau, Eric et Al-Haddad, Kamal.
2025.
« Data-driven switching control technique based on deep reinforcement learning for packed E-cell as smart EV charger ».
IEEE Transactions on Transportation Electrification, vol. 11, nº 1.
pp. 3194-3203.
Gheisarnejad, Meysam, Fathollahi, Arman, Sharifzadeh, Mohammad, Laurendeau, Eric, Andresen, Björn et Al-Haddad, Kamal.
2025.
« Optimal policy gradient based type-2 fuzzy control for multi-DC terminal PEC converter in 5G-based commercial buildings ».
IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 13, nº 4.
pp. 5149-5161.
Gheisarnejad, Meysam, Oshnoei, Soroush, Sharifzadeh, Mohammad, Laurendeau, Eric et Al-Haddad, Kamal.
2025.
« Event-triggered entropy learning for encountering of FDI attack in grid-connected packed e-cell inverter ».
IEEE Transactions on Industrial Electronics.
Gherbi, Yasmine et Thamsuwan, Ornwipa.
2025.
« Berg balance test for predicting a fall risk in older adults living at home: A preliminary study on the effect of pre-existing health conditions on postural balance ».
In Proceedings of the 22nd Congress of the International Ergonomics Association, Volume 3: Better Life Ergonomics for Future Humans (IEA 2024) (Jeju Island, Korea, Aug. 25-29, 2024)
Coll. « Springer Series in Design and Innovation », vol. 41.
pp. 455-462.
Springer Nature.
Ghodsian, Nooshin, Benfriha, Khaled, Olabi, Adel, Gopinath, Varun, Talhi, Esma, Hof, Lucas et Arnou, Aurélien.
2025.
« MSOA: A modular service-oriented architecture to integrate mobile manipulators as cyber-physical systems ».
Journal of Intelligent Manufacturing, vol. 36, nº 5.
pp. 3207-3226. Gholami, Aysan, Afra, Behrooz et Tarokh, Ali. 2025. « Heat transfer enhancement in heated microchannels: Role of filament characteristics and flapping dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Ghommam, J., Sinan, S., Fareh, R. et Saad, M..
2025.
« Fixed-time adaptive cooperative control architecture for air-ground target tracking using UAV and UGV with dynamic constraints ».
International Journal of Control.
Ghommam, Jawhar, Ayeb, Amani, Brahmi, Brahim et Saad, Maarouf.
2025.
« Cooperative RISE learning-based circumnavigation of networked unmanned aerial vehicles with collision avoidance and connectivity preservation ».
Control Theory and Technology, vol. 23, nº 2.
pp. 266-293.
Ghommam, Jawhar, Iftekhar, Lamia, Rahman, Mohammad H. et Saad, Maarouf.
2025.
« Cooperative learning-based practical formation-containment control with prescribed performance for heterogeneous clusters of UAV/USV ».
Asian Journal of Control, vol. 27, nº 2.
pp. 921-947.
Ghommam, Jawhar, Saad, Maarouf, Naimi, Ibrahim Al, Rahman, Mohammed H. et Mnif, Faisal.
2025.
« Active rudders for ship berthing system design with flexible prescribed performance ».
In IEEE 22nd International Multi-Conference on Systems, Signals & Devices (SSD) (Monastir, Tunisia, Feb. 17-20, 2025)
pp. 1277-1283.
Institute of Electrical and Electronics Engineers Inc..
Ghommam, Jawhar, Saad, Maarouf, Rahman, Mohammad H. et Zhu, Quanmin.
2025.
« Prescribed performance resilient motion coordination with actor–critic reinforcement learning design for UAV-USV systems ».
IEEE Transactions on Artificial Intelligence.
Ghommam, Jawhar, Saad, Maarouf, Zhu, Quan Min et Rahman, Mohammed H..
2025.
« Adaptive prescribed time path following controller for underactuated surface vessels ».
In 13th International Conference on Intelligent Control and Information Processing (ICICIP) (Muscat, Oman, Feb. 06-11, 2025)
pp. 8-14.
Institute of Electrical and Electronics Engineers Inc..
Ghommam, Jawhar, Sinan, Saif, Saad, Maarouf et Zhu, Quanmin.
2025.
« Vision-based prescribed-time guidance control for uncooperative tracking of nonholonomic vehicle using quadrotor UAV ».
Journal of the Franklin Institute, vol. 362, nº 18.
Ghorbani, Nima, Khayyaminejad, Amirhossein, Shabestari, Mahdiyar Khalilzade et Fartaj, Amir.
2025.
« Geometrical investigation of solar chimney with PCM-integrated Trombe wall for enhanced thermal comfort and energy efficiency ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Gilani, Ryid et Ghasemi, Abbas.
2025.
« Large eddy simulations of freely evolving and colliding human exhalation flows ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Gimenez, Jessica C. Ferreira, Paiva, Robert, Bonatti, Sophia H. F., Staffa, Lucas H., Pereira, Edenir Rodrigues, Helal, Emna, Demarquette, Nicole R., Homem, Manoel G. P. et Cruz, Sandra A..
2025.
« Mitigating UV-C degradation in polypropylene using hybrid TiO2/few-layer graphene/photostabilizer systems ».
ACS Omega, vol. 10, nº 44.
pp. 53467-53478.
Gimenez, Jessica Caroline Ferreira, Bonatti, Sophia Helena Felisbino, Basaglia, Marcos Vinicius, Garcia, Rodrigue Henrique dos Santos, dos Santos, Alef, Staffa, Lucas Henrique, Samara, Mazen, Bettini, Silvia Helena Prado, de Azevedo, Eduardo Ribeiro, Helal, Emna, Demarquette, Nicole Raymonde, Homem, Manoel Gustavo Petrucelli et Cruz, Sandra Andrea.
2025.
« 1H time domain nuclear magnetic resonance and oscillatory rheology as a tool for uncovering the impact of UV-C radiation on polypropylene ».
Polymers, vol. 17, nº 20.
Giordano, E., Han, Y., Wang, A., Bisol, G. D., Andrews, S. et Malomo, D..
2025.
« Discontinuum rocking of rigid masonry macro-blocks using physics engines: analytical, numerical and experimental benchmarking ».
Structures, vol. 80.
Glibin, Vassili P., Dodelet, Jean-Pol et Zhang, Gaixia.
2025.
« Ptn-Mn(II)Nx and Ptn-Mn(III)Nx are both winning combinations for the durability of these hybrid catalysts in PEM fuel cells: a deep insight into synergism between Pt clusters and MnNx/C sites ».
Journal of Materials Chemistry A.
Gnone, Daniel Gomez, De Assis, Rodrigo Furlan, Ouhimmou, Mustapha et De Paula Ferreira, William.
2025.
« Enhancing warehouse efficiency: A study on storage allocation assignment in a footwear manufacturing company ».
[Article de conférence]. IFAC-PapersOnLine, vol. 59, nº 10.
pp. 2485-2490.
Gnonhoue, George, David, Éric, Voix, Jérémie et Tabiai, Ilyass.
2025.
« Hybrid flexible dry electrodes for electroencephalography: Electrical and thermo-mechanical properties ».
Journal of Applied Polymer Science.
Gnonhoue, George, Tabiai, Ilyass, Voix, Jérémie et David, Éric.
2025.
« Flexible dry electrodes based on styrene-ethylene-butylene-styrene/carbon black and ethylene-vinyl acetate/carbon black for electroencephalography: Electrical, thermal and mechanical properties ».
Journal of Applied Polymer Science.
Goel, Chirag, Gratuze, Mathieu, Robichaud, Alexandre, Izquierdo, Ricardo et Cicek, Paul-Vahe.
2025.
« A method for expanding the bandwidth and decreasing the actuation voltage of CMUT devices ».
IEEE Sensors Letters.
Goharshenas Moghadam, Saba, Momen, Gelareh, Zarrougui, Ramzi et Jafari, Reza.
2025.
« Innovative ice mitigation: Exploring the potential of choline-based deep eutectic solvents and ionic liquids synergies ».
Applied Surface Science, vol. 680.
Gohel, Ankur, Gratuze, Mathieu, Ketabi, Mohsen et Izquierdo, Ricardo.
2025.
« Direct-write printing for flexible and 3D electronics: Aerosol jet vs. Micro dispensing ».
Micromachines, vol. 16, nº 8.
Gomez Aguilar, A. J., Kenné, J.-P. et Hof, L. A..
2025.
« Quality inspection and condition-based preventive maintenance in a closed-loop multi-stage manufacturing system ».
[Article de conférence]. IFAC-PapersOnLine, vol. 59, nº 10.
pp. 100-105.
Gomit, Guillaume, Jarny, Sébastien, Lecostey, Pierre, Pham Van Bang, Damien et Thomas, Lionel.
2025.
« Using cohesive model materials in mud erosion experiments ».
Journal of Hydraulic Engineering, vol. 151, nº 5.
Gonzalez-Lopez, Aldo, Leclair, Jean-Philippe, Villeneuve, Guillaume, Hof, Lucas A. et Escobedo, Carlos. 2025. « In-situ microplastic pre-treatment and sorting using an inertial microfluidic device ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Gonzalez-Lopez, Aldo, Mendez, Federico, Docoslis, Aristides, Vargas, Carlos et Escobedo, Carlos. 2025. « Fractal-geometry microelectrodes improve silver dendritic-based surface enhanced Raman scattering ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Goodarzi, Asefeh Hasani, Jabbarzadeh, Armin, Paquet, Marc et Haughton, Michael.
2025.
« An optimization approach for resilient and sustainable planning of intermodal transport ».
Environment Development and Sustainability.
Goodarzi, Fahimeh et Di Labbio, Giuseppe. 2025. « Vortex dynamics and trajectories of two pulsed jets: A DNS study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Goodarzi, Fahimeh, Di Labbio, Giuseppe et Mani, Mahmoud.
2025.
« Unsteady wake characteristics of a plunging airfoil at post-stall conditions ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Gosselin, Louis. 2025. « An engineering researcher’s journey through the Nunavik energy transition ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Goudarzi, Jafar, Chen, Zhi, Zhang, Gaixia, Hu, Jinguang, Zaghib, Karim, Deng, Sixu, Dar, Afzal Ahmed, Wang, Xiaolei, Haghighat, Fariborz, Mulligan, Catherine N., An, Chunjiang et Ramirez, Antonio Avalos.
2025.
« Sustainable recovery of critical metals from spent lithium-ion batteries using deep eutectic solvents ».
Batteries, vol. 11, nº 9.
Goudarzi, Sahar, Muzychka, Yuri et Naterer, Greg.
2025.
« Conjugate heat transfer and freezing of impinging droplets on coated steel substrates ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Gougeon, Samuel, Ung, Bora et LaRochelle, Sophie.
2025.
« Design of a PANDA-type highly elliptical core few-mode fiber for mode multiplexing ».
In LEOS Summer Topical Meeting (Berlin, Germany, July 21-23, 2025)
Institute of Electrical and Electronics Engineers Inc..
Gougeon, Samuel, Ung, Bora et Larochelle, Sophie.
2025.
« Semi-analytical modeling and design of PANDA-type highly-elliptical-core few-mode fibers ».
Journal of Lightwave Technology, vol. 43, nº 22.
pp. 10302-10311. Gouin, Charles, St-Onge, David et Reeves, Nicolas. 2025. « Ohno: Slow-motion precision engineering for the visualization of Earth’s tectonic drift ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Grenon, Valérie, Maref, Wahid et Ouellet-Plamondon, Claudiane.
2025.
« How the new insulation materials made with mycelium compares to mineral and hemp wools? ».
In Multiphysics and Multiscale Building Physics : Proceedings of the 9th International Building Physics Conference (IBPC 2024) Volume 1: Moisture and Materials (Toronto, ON, Canada, July 25-27, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 552.
pp. 318-323.
Springer Nature.
Grenon, Valérie, Maref, Wahid et Ouellet-Plamondon, Claudiane.
2025.
« Potential of using the mycelium of pleurotus ostreatus as a thermal insulator ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023, Volume 6 : Materials Track (Moncton, NB, Canada, May 24-27, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 500.
pp. 239-250.
Springer Nature.
Groth, Clinton P. T: et Binato, Stefano.
2025.
« Large-eddy simulation of turbulent premixed hydrogen-air Bunsen flames using PCM-FPI combustion model ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Groth, Clinton et Walia, Rayhan. 2025. « Investigation of observation quality on variational data assimilation methods ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Gu, Jinyu, Wang, Yingjun et Xu, Hang.
2025.
« Fatigue damage constrained topology optimization for thermo-mechanical loading ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Guemas, Malo, Duc, Kevin Le, Poncet, Sébastien, Samson, Nathalie, Lavallée, Eric, Fortin-Pellerin, Etienne et Micheau, Philippe. 2025. « Regulation of perflubron volume in lung during total liquid ventilation based on the detection of pressure drops ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Guérineau, Julia et Rivest, Louis. 2025. « Reactivating product development knowledge through short learning video capsules ». Communication lors de la conférence : Canadian Engineering Education Association Conference = Conférence de l'Association Canadienne de l'Éducation en Génie CEEA-CAÉG (Montréal, QC, Canada, June 18-21, 2025).
Guérineau, Julia, Rivest, Louis et Bricogne, Matthieu.
2025.
« A synthesis mapping of approaches, processes, methods and tools from the scientific literature for multidisciplinary product development ».
Results in Engineering, vol. 28.
Guérineau, Julia, Ton, Jollan et Zhuldybina, Mariia.
2025.
« Screen printing conductive inks on textiles: Impact of plasma treatment ».
Sensors, vol. 25, nº 13.
Guerziz, Arij, Bodkhe, Sampada et Lajili, Chaima. 2025. « 3D printing of smart materials for reconfigurable drones: Design and fabrication ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Guesneau, Marianne, Cherta-Ballester, Oscar, Honoré, Valentin, Petit, Yvan, Arnoux, Pierre-Jean et Bailly, Nicolas.
2025.
« Evaluating the reliability of multibody models of micromobility users: Comparison with ATD reconstructions and real-world accident footage ».
In Conference proceedings International Research Council on the Biomechanics of Injury (IRCOBI) (Vilnius, Lithuania, Sept. 10-12, 2025)
International Research Council on the Biomechanics of Injury. Guesneau, Marianne, Khazri, Jaber, Cherta, Oscar, Arnoux, Pierre-Jean et Bailly, Nicolas. 2025. « Development and validation of a finite element model for a head protection airbag ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Guettouche, Wala eddine et Zednik, Ricardo J..
2025.
« Anisotropic fracture energy of boron-doped p-type silicon by microindentation: Influence of temperature and crystallographic orientation ».
Crystals, vol. 15, nº 6.
Guilbault, Raynald.
2025.
« S-EPSO: A socio-emotional particle swarm optimization algorithm for multimodal search in low-dimensional engineering applications ».
Algorithms, vol. 18, nº 6.
Guner, Bugrahan, Safikhani-Mahmoudi, Mohammad et Dagdeviren, Omur E..
2025.
« Time-resolved mapping of charge carrier dynamics and defect-mediated migration barriers in TiO2 ».
Journal of Physical Chemistry C, vol. 129, nº 37.
pp. 16879-16886.
Guner, Bugrahan, Safikhani-Mahmoudi, Mohammad, Li, Fengmiao, Zou, Ke et Dagdeviren, Omur E..
2025.
« Ultraviolet irradiation penetration depth on TiO2 ».
Communications Chemistry, vol. 8, nº 1.
Gunther, Jason, Girard, Mélanie, Dubé, Martine et Tabiai, Ilyass.
2025.
« A study on the influence of polypropylene melt flow index on nonwoven fibers produced through hot melt centrifugal spinning ».
Journal of Manufacturing Science and Engineering, vol. 147, nº 4.
Guyard, Raphaël et Blum, Guillaume.
2025.
« Innover en facilitant l'appropriation critique des technologies par le design thinking : le cas de PRISME, laboratoire d'innovation numérique du Musée des beaux-arts de Montréal ».
Management international, vol. 29, nº 1.
pp. 4-15.
Haddadou, Imane, Ami, Amina, Gagnon, Jonathan et Ouellet-Plamondon, Claudiane M..
2025.
« The antibacterial and anticorrosion activity of sodium alginate-chitosan cryogels and hydrogels loaded with Satureja montana essential oil and Monarda didyma hydrolate ».
Materials Today Chemistry, vol. 46.
Haddadou, Imane, Brisebois, Patrick, Ouellet-Plamondon, Claudiane M., Benetti, Daniele et Rosei, Federico.
2025.
« Fluorescent chitosan hydrogels based on biomass-derived carbon dots for toxic aromatic detection ».
Advanced Sustainable Systems.
Haddouche, Mohamed, Ilinca, Adrian et Chaouch, Mounir.
2025.
« Enhancing energy efficiency in the wood furniture sector through industry 4.0: Real-time implementation and case study ».
Energy Technology.
Hadizade, Amin et Degroot, Christopher. 2025. « Exploring the potential of computational fluid dynamics in indoor UV-assisted air treatment ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Hadizade, Amin, Saifi, Reza, Allaf, Malihe Mehdizadeh, Hossain, Mohammad, Jarrahi, Mojtaba, Degroot, Christopher et Peerhossaini, Hassan. 2025. « Particle tracking velocimetry of microalgal response to light ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Hadizadeh, Anita, Zare, Marjan et Frigaard, Ian. 2025. « Yield limit analysis of a single bubble in damaged viscoplastic fluids ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Hafied, Mohamed Islem, Mateur, Wael, Songmene, Victor, Kouam, Jules et Bahloul, Ali. 2025. « Usinage et finition saine des pierres naturelles et des pierres artificielles: Revue des meilleures pratiques ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Haghighat, Seyed Mohammad Ali Abbaspoor, Alibazi, Ali, Moradifard, Reza, Guizani, Lofti et Hassan, Munzer.
2025.
« Seismic evaluation of steel plate shear walls in different configurations ».
Journal of Rehabilitation in Civil Engineering, vol. 13, nº 4.
pp. 81-109. Haillot, Didier, Chauvette, Sam, Menguy, Emile, Arrabie, Cédric, Roy, Audrey, Chevassus, Guilhem et Gibout, Stéphane. 2025. « Agriculture nordique : Du cas d’étude de la serre de Kuujjuaq à la création d’un laboratoire de bonne pratique ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).
Hajimiri, Sina, Ben Ayed, Ismail et Dolz, José.
2025.
« Pay attention to your neighbours: Training-free open-vocabulary semantic segmentation ».
In IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) (Tucson, AZ, USA, Feb. 26-Mar. 06, 2025)
pp. 5061-5071.
IEEE.
Hajji, Amel, Dhouib, Karem et Gharbi, Ali.
2025.
« Overall equipment effectiveness modelling and assessment of additive manufacturing printing machines ».
In Advances in Additive Manufacturing: Materials, Processes, and Applications II: Selected Contributions to the 3rd Advances in Additive Manufacturing Conference (AIAM' 2024) (Hammamet, Tunisia, May 17-19, 2024)
Coll. « Lecture Notes in Mechanical Engineering »
pp. 149-162.
Springer Science and Business Media Deutschland GmbH.
Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2025.
« Effect of gap size on flange face corrosion ».
Materials and Corrosion-Werkstoffe Und Korrosion, vol. 76, nº 6.
pp. 833-850.
Hakimian, Soroosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2025.
« Corrosion type identification in flanged joints using recurrent neural networks on electrochemical noise measurements ».
npj Materials Degradation, vol. 9, nº 1.
Halgand, Antoine. 2025. « Optimization of PMMA Reactive Ion Etching in O₂ Plasma for Advanced Microelectronic Applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Hameed, Aroosa, Violos, John, Santi, Nina, Leivadeas, Aris et Mitton, Nathalie.
2025.
« FeD-TST: Federated Temporal Sparse Transformers for QoS prediction in Dynamic IoT Networks ».
IEEE Transactions on Network and Service Management, vol. 22, nº 2.
pp. 1055-1069.
Hameury, Celia, Ferrari, Giovanni et Amabili, Marco.
2025.
« A nonlinear dual-mode active vibration controller for hardening systems and its experimental application to a beam ».
Journal of Sound and Vibration, vol. 597, nº Part A.
Hameury, Celia, Ferrari, Giovanni et Amabili, Marco.
2025.
« Experimental testing of four different active vibration controllers on a clamped sandwich beam with nonlinear vibrations ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hamidi, Mahdi. 2025. « Engineering next-generation materials: from multifunctional nanocomposites to reconfigurable nanoarchitectures ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Hammouti, Abdelkader, Hurtado-Herrera, Mario, Zapata, Miguel Uh, Zhang, Wei, Nguyen, Kim Dan et Pham Van Bang, Damien.
2025.
« Vortex scouring process around a vertical pile varying shapes and flow regimes ».
In Proceedings of the 41st IAHR World Congress (Singapor, Singapor, June 22-27, 2025)
International Association of Hydro-Environmental Engineering and Research (IAHR). Hammouti, Abdelkader et Pham Van Bang, Damien. 2025. « Multiscale numerical simulation of flow in porous media using 3D digital twin models from computed tomography ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Hammouti, Abdelkader et Pham Van Bang, Damien. 2025. « Évaluation et modélisation de la dynamique sédimentaire près d’un ouvrage côtier ». Communication lors de la conférence : Réseau Québécois d’Adaptation et de Gestion des Zones Côtières (RQAGZC) (Rivière-du-Loup, QC, Canada, May 21-23, 2025). Hamoud-Michel, Hanna, Wheatley, Sydney, King, Irah, Maurice, Corinne et Ahmadi, Ali. 2025. « Smart capsules for the targeted sampling of microbiota within the gastrointestinal tract ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Handler, Johannes et Harker, Matthew.
2025.
« Real-time nonlinear quadratic trajectory tracking control for polynomial nonlinear systems ».
[Article de conférence]. IFAC-PapersOnLine, vol. 59, nº 19.
pp. 186-191.
Hannachi, Ahlam, Jaafar, Wael, Bitam, Salim et Ouazene, Nabil.
2025.
« A novel energy-efficient cross-layer design for scheduling and routing in 6TiSCH networks ».
Computer Communications, vol. 239.
Haon, Pauline, Brochu, Myriam, Paquet, Daniel et Tôn-Thât, Laurent. 2025. « In situ characterization of microstrain partitioning in the microstructures of hydraulic turbine steels. ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Hariri, Raghda, Sebaaly, Fadia, Al-Haddad, Kamal et Kanaan, Hadi Y..
2025.
« MPC design and comparative analysis of single-phase 7-level PUC and 9-Level CSC inverters for grid integration of PV panels ».
Energies, vol. 18, nº 19.
Harker, Matthew.
2025.
« Least-squares reconstruction of a 3D potential from its measured spatial velocity field ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Harms, Michael P., Cho, Kang-Ik K., Anticevic, Alan, Bolo, Nicolas R., Bouix, Sylvain, Campbell, Dylan, Cannon, Tyrone D., Cecchi, Guillermo, Goncalves, Mathias, Haidar, Anastasia, Hughes, Dylan E., Izyurov, Igor, John, Omar, Kapur, Tina, Kim, Nicholas, Kotler, Elana, Kubicki, Marek, Kuperman, Joshua M., Laulette, Kristen, Lindberg, Ulrich, Markiewicz, Christopher, Ning, Lipeng, Poldrack, Russell A., Rathi, Yogesh, Romo, Paul A., Tamayo, Zailyn, Wannan, Cassandra, Wickham, Alana, Yassin, Walid, Zhou, Juan Helen, Addington, Jean, Alameda, Luis, Arango, Celso, Breitborde, Nicholas J. K., Broome, Matthew R., Cadenhead, Kristin S., Calkins, Monica E., Chen, Eric Yu Hai, Choi, Jimmy, Conus, Philippe, Corcoran, Cheryl M., Cornblatt, Barbara A., Diaz-Caneja, Covadonga M., Ellman, Lauren M., Fusar-Poli, Paolo, Gaspar, Pablo A., Gerber, Carla, Glenthøj, Louise Birkedal, Horton, Leslie E., Hui, Christy Lai Ming, Kambeitz, Joseph, Kambeitz-Ilankovic, Lana, Keshavan, Matcheri S., Kim, Sung-Wan, Koutsouleris, Nikolaos, Kwon, Jun Soo, Langbein, Kerstin, Mamah, Daniel, Mathalon, Daniel H., Mittal, Vijay A., Nordentoft, Merete, Pearlson, Godfrey D., Perez, Jesus, Perkins, Diana O., Powers, Albert R., Rogers, Jack, Sabb, Fred W., Schiffman, Jason, Shah, Jai L., Silverstein, Steven M., Smesny, Stefan, Stone, William S., Strauss, Gregory P., Thompson, Judy L., Upthegrove, Rachel, Verma, Swapna K., Wang, Jijun, Wolf, Daniel H., Kahn, Rene S., Kane, John M., McGorry, Patrick D., Nelson, Barnaby, Woods, Scott W., Shenton, Martha E., Wood, Stephen J., Bearden, Carrie E. et Pasternak, Ofer.
2025.
« The MR neuroimaging protocol for the Accelerating Medicines Partnership® Schizophrenia Program ».
Schizophrenia, vol. 11, nº 1.
Haro, Luis Miguel Moreno, Oliveira-Filho, Adaiton, Agard, Bruno et Tahan, Antoine.
2025.
« Failure detection in sensors via variational autoencoders and image-based feature representation ».
Sensors, vol. 25, nº 7.
Hasasneh, Ahmad, Masri, Sari et Tadj, Chakib.
2025.
« Unveiling hidden patterns in infant cry audio: A multi-feature vision transformer approach with explainable AI ».
IEEE Access, vol. 13.
pp. 161103-161115.
Hashemi, Seyed Mohammad, Ghazi, Georges et Botez, Ruxandra Mihaela.
2025.
« Developing a new adaptive optimal k-Nearest Neighbor methodology for flight test data anomaly detection – application to business aircraft ».
In AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum (Orlando, FL, USA, Jan. 06-10, 2025)
Coll. « AIAA Paper », vol. AIAA 2025-2226.
American Institute of Aeronautics and Astronautics Inc, AIAA. Hashemidehaghi, Hossein, Kheiri, Mojtaba et Hooshiar, Amir. 2025. « Flow-driven soft robots: computational and experimental investigations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Hassan, Munzer et Sennah, Khaled.
2025.
« Advances in bridge design and construction: Technologies and applications ».
Applied Sciences, vol. 15, nº 17.
Hassani, Fereshteh, Zobeiry, Navid, Javanbakht, Zia et Malek, Sardar. 2025. « Energy absorption of bio-inspired rotating square auxetics: An experimental study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Hassani, Maryam, Stache, Nelson, Shakibaeinia, Ahmad et Carreau, Julie. 2025. « Machine-learning based resolution enhancement for fluvial hydrodynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Hassanijajini, Hamidreza, Hassanimohebi, Zahra et Gardoni, Mickaël.
2025.
« Preparation of Archi-TRIZ matrix for accelerating innovation in building design process ».
International Journal of Design Management and Professional Practice, vol. 19, nº 1.
pp. 35-53.
Hassanzadeh, Hossein, Banda, Mariana Cruz et Taghavi, Seyed Mohammad.
2025.
« Exploring miscible jet dynamics in complex fluids ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hatzikiriakos, Savvas G. et Demarquette, Nicole R..
2025.
« Tribute to Dr. John Michael Dealy and special collection in Physics of Fluids ».
Physics of Fluids, vol. 37, nº 9.
Hazzab, Abdeldejbar, Gouabi, Hicham, Habbab, Mohamed, Rezkallah, Miloud, Chandra, Ambrish et Ibrahim, Hussein.
2025.
« Fuzzy logic scheduling of the duty cycle perturbation for optimized MPPT controller of PV/wind hybrid system ».
IEEE Transactions on Industry Applications, vol. 61, nº 1.
pp. 642-652.
He, Minhui, Sylvain, Jean-Daniel, Silvestro, Roberto, Drolet, Guillaume, Arsenault, Richard et Rossi, Sergio.
2025.
« Xylogenesis under future climates: Enhanced growth of balsam fir in a warming boreal forest ».
Frontiers in Plant Science, vol. 16.
Hebert, Sean, Corbett, Finley, Jeans, Tiger, Gerber, Andrew et Carretero, Juan Antonio. 2025. « Optimization of leading-edge slat position and orientation for thick airfoils ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Hedayatnejad, Maryam, Pei, Yinqing, Boertjes, David, Demeter, Dacian, Desrosiers, Christian et Tremblay, Christine.
2025.
« Multi-step span loss prediction in optical networks using multi-head attention transformers ».
IEEE Photonics Journal, vol. 17, nº 3.
Hedeya, Yassine, Merabtine, Abdelatif et Maref, Wahid.
2025.
« Evaluating the urban heat island effect in Montreal: Urban density, vegetation, demographic, and thermal landscape analysis ».
Buildings, vol. 15, nº 9.
Heidari, Navid, Moghaddam, Mohammadreza Kolahdouz, Nabavi, Seyedfakhreddin, Ménard, Michaël et Nabki, Frederic.
2025.
« Bidirectional electrostatic rotary MEMS actuator achieving ±3.2° angular displacement ».
Journal of Microelectromechanical Systems.
Heidari, Navid, Pita Ruiz, Julian L., Nabavi, Seyedfakhreddin, Menard, Michael et Nabki, Frederic.
2025.
« Reconfigurable electrostatically actuated 1 × 5 rotary MOEMS switch ».
Optics Express, vol. 33, nº 5.
pp. 10726-10740. Heidari, Parham, Boakye-Yiadom, Solomon et O'brien, Paul. 2025. « Photothermal properties of carbon aerogels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Helal, Emna et Belgacem, Omayma. 2025. « Enhancing the recyclability and thermal properties of a novel low-carbon engineering polymer, aliphatic polyketone, through graphene and glass fiber incorporation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Henderson, Andrew. 2025. « Sustainability 1.0 in Industry 5.0: Bringing together old thinking and new tools ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Herfray, Benjamin, Higgins, Andrew et Nedi, Jovan. 2025. « Numerical investigation of instability growth and shear stabilization in conducting liquid metal columns ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Heritier, Maguelonne, Mekhazni, Djebril, Leblond-Menard, Cedric, Godbout, Benoit, Guilbaud, Nathan, Alehdaghi, Mahdi et Granger, Eric.
2025.
« ExaM: Unsupervised concept-based representation learning to better explain models in vision tasks ».
In IEEE Computer Society Conference on Computer Vision and Pattern Recognition Workshops (Nashville, TN, USA, June 11-12, 2025)
pp. 2741-2750.
IEEE Computer Society.
Hernandez, Diego, Maclean, Allyson et Dumond, Patrick.
2025.
« Mechanical pollination of strawberry plants ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hernandez, Jesus A. Arias et Moosavi-Khoonsari, Elmira.
2025.
« Modified polyhedron model for predicting standard enthalpy of formation and entropy of mixed oxides ».
Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, vol. 90.
Hernandez-Garcia, Abraham, Poulin, Annie, Romero-Lopez, Rabindranarth et Paquin, Dominique.
2025.
« Assessment of ERA-Interim-driven RCM simulations in reproducing the link between ENSO and Climate Extreme Indices ».
Theoretical and Applied Climatology, vol. 156, nº 2.
Hernandez-Garcia, Abraham, Poulin, Annie, Romero-Lopez, Rabindranarth et Paquin, Dominique.
2025.
« Assessment of regional climate model simulations at reproducing the link between PDO and climate extreme precipitation indices in Mexico ».
Theoretical and Applied Climatology, vol. 156, nº 2.
Herpt, David Van et Poirel, Dominique. 2025. « Experimental study and analysis of a free pitching flexible cantilever NACA0012 wing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Hesari, Araz Rezavand, Coulaud, Maxime, Houde, Sébastien et Maciel, Yvan. 2025. « Measured flow at the inlet of a Francis turbine at various no-load and one deep part-load operating conditions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Heshmati, Milad, Bastami, Ali H., Sboui, Lokman et Dziong, Zbigniew.
2025.
« Adaptive modulation for non-orthogonal multiple access (NOMA) with imperfect SIC ».
IEEE Access, vol. 13.
pp. 144344-144361. Hinman, W. Schuyler et Bergen, Wyatt. 2025. « Aerodynamic predictions of a parametric common research model for winged re-entry ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Hiol, Ralph Kinte Pouhe et Sanjose, Marlène.
2025.
« Aeroacoustic analysis in a tail rotor configuration using large eddy simulations and Ffowcs Williams and Hawkings’ analogy ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ho, Tai Manh, Nguyen, Kim Khoa et Cheriet, Mohamed.
2025.
« AI-powered digital twins for robotic control in 5G-enabled industrial automation ».
IEEE Journal on Selected Areas in Communications, vol. 43, nº 10.
pp. 3347-3361.
Ho, Van Thang, Giani, Celia, Vaillancourt, Michel, Dave, Eshan et Carter, Alan.
2025.
« Study the crack development of geosynthetics interlayers in bituminous structures under different temperatures ».
Journal of Testing and Evaluation, vol. 53, nº 5.
pp. 1291-1306. Hocine, Alla Eddine Benchikh Le, Lavimi, Roham et Poncet, Sébastien. 2025. « New adjoint optimization framework applied to a squirrel cage fan using OpenFOAM ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Holz, Daniel, Jeske, Stefan Rhys, Löschner, Fabian, Bender, Jan, Yang, Yin et Andrews, Sheldon.
2025.
« Multiphysics simulation methods in computer graphics ».
Computer Graphics Forum.
Hong, Rongfu, Xing, Lixin, Wu, Mingjie, Chen, Zhangsen, Wang, Ning, Meng, Ling, Ye, Siyu, Wang, Liguang, Zhang, Gaixia et Du, Lei.
2025.
« Resonant inelastic X-ray scattering for studying materials for renewable energy conversion and storage ».
iScience, vol. 28, nº 7.
Hosseini, Faezeh, Asad, Asad et Yakout, Mostafa.
2025.
« Effect of laser powder bed fusion process parameters on microstructure and coefficient of thermal expansion of Al6061 ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hosseini, Maryam, Zambotti, Massimiliano de, Baker, Fiona C. et Forouzanfar, Mohamad.
2025.
« Multi-stream LSTM for artifact detection in impedance cardiography ».
IEEE Sensors Letters, vol. 9, nº 5.
Hosseini, Seyed Hamed Seyed, Hajzargarbashi, Seyedhossein et Liu, Zhaoheng.
2025.
« Vibration analysis of robot manipulators and Gaussian process regression for estimating posture-dependent FRF ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hosseinnia, Seyed Mojtaba, Metsue, Antoine, Amiri, Leyla et Poncet, Sébastien.
2025.
« Supercritical CO2 heat transfer enhancement in large diameter horizontal tubes by internal fins ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hosseinpour, Vahid, Saeidi, Ali, Nastev, Miroslav et Nollet, Marie-José.
2025.
« Development of a damage simulator for probabilistic seismic vulnerability assessment of electrical installations ».
International Journal of Disaster Risk Reduction, vol. 116.
Hossen, Mohammed Khalid, Asgari, Ehsan, Saeedi, Mohammad et Nyantekyi-Kwakye, Baafour.
2025.
« Large-eddy simulation of an offset jet flow over surface-mounted ribs ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hou, Hongyu et Cao, Changhong. 2025. « Contact free micro-scale pick and place ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Hou, Linlin, Yan, Zishen, Desrosiers, Christian et Liu, Hui.
2025.
« MFCPNet: Real time medical image segmentation network via multi-scale feature fusion and channel pruning ».
Biomedical Signal Processing and Control, vol. 100, nº Part B.
Houde, Sebastien, Gosselin, Frédérick, Maciel, Yvan et St-Amant, Yves. 2025. « Investigations of fluid-structure interactions in Francis turbines during no-load operation and start-ups using innovative model measurements and simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Houria, Manel, Kaveh, Kianoosh, Morin, Jean-Benoit, Jahazi, Mohammad et Moosavi, Elmira.
2025.
« Computational thermodynamics approach to overcoming challenges in high-nitrogen low-manganese stainless steel production ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hsieh, Nathan, Guan, Aaron, Koul, Saraswati et Leung, Siu Ning (Sunny).
2025.
« Design and fabrication of green polyester-based adhesives reinforced by bio-based nanoparticles ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hu, Zhirou, Chen, Kuiying et Jin, Tao.
2025.
« Phase-field crack simulation for thermomechanically coupled problems ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hua, Zehui, Sehri, Mert et Dumond, Patrick.
2025.
« Bearing fault diagnosis using text analysis on the CWRU dataset ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Huang, Yu Xuan, Mahmood, Daniyal, Tajeddini, Farshad, Amon, Cristina et Crawford, Sean. 2025. « Sensitivity analysis of intraoperative pressure-derived boundary conditions in acute type B aortic dissection CFD simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Huang, Yuhao, Jalayer, Shayan, Kim, Hansu, Huh, Jaesung et Kim, Il Yong.
2025.
« Multi-stage topology optimization of electric motor for urban air mobility vehicle ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Huck, Kevin A., Shende, Sameer, Malony, Allen D., Coti, Camille, Spear, Wyatt, Alcaraz, Jordi, Yokelson, Dewi, Ramesh, Srinivasan, Alaul Haque, Monil Mohammad, Wood, Chad, Chaimov, Nick, Durbin, Cameron, Johnson, Alister, Lambert, Jacob et Beekman, Izaak.
2025.
« Preparing the TAU performance system for exascale and beyond ».
International Journal of High Performance Computing Applications, vol. 39, nº 4.
Hui, Spenser, Deol, Ankush, Moo, Eng Kuan et Garces, Irina. 2025. « Melt electrowriting of shape memory polymers: A novel approach for smart material fabrication ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Hurtado, Arleth Suárez, Cordova, Angel Mora et Czekanski, Aleksander.
2025.
« Magnetic field influence on the mechanical properties of 3D-printed magnetorheological composites ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hussien, Mostafa, Cheriet, Mohamed, Nguyen, Kim Khoa, Larabi, Adel et Baek, Jungyeon.
2025.
« GenAI-based privacy-preserving transfer learning ».
IEEE Transactions on Industrial Cyber-Physical Systems, vol. 3.
pp. 329-340.
Hussien, Mostafa, Nguyen, Kim Khoa, Larabi, Adel et Cheriet, Mohamed.
2025.
« Automated source selection for enhanced inter-gNB transfer learning through modeling propagation environments ».
In IEEE International Conference on Communications Workshops (ICC Workshops) (Montreal, QC, Canada, June 08-12, 2025)
pp. 905-910.
Institute of Electrical and Electronics Engineers Inc..
Huy, Hoang Vu, Albert, Kevin, Ramachandran, Srinivasan, Jouvet, Philippe et Noumeir, Rita.
2025.
« Template-based respiratory monitoring and tidal volume estimation ».
IEEE Journal of Biomedical and Health Informatics.
Huynh, Liem, Chaudhry, Shubham, Holsworth, David et Vu, Viet-Hung.
2025.
« Laser powder bed fusion optimal process window for tensile strength of Ti-6AL-4V ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Hwang Arcolezi, Karina, Ouellet-Plamondon, Claudiane et Ung, Bora.
2025.
« Interactive light and sound-sensitive mortar for architectural environments ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024, Volume 2, Simulation and Automation (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 629.
pp. 489-497.
Springer.
Iatissami, Ilyass et Boton, Conrad.
2025.
« Comparative analysis of two BIM model transfer processes in cave automatic virtual environments ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 325-337.
Springer Nature.
Ibazebo, Ehidiame, Savsani, Vimal, Siddhpura, Arti, Siddhpura, Milind et Savsani, Poonam.
2025.
« Enhanced failure mode effect analysis methodology in the risk assessment of marine machinery systems ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ibrahim, Basil, Mousa, Salaheldin, Chaallal, Omar, Fam, Amir et Benmokrane, Brahim.
2025.
« The effect of bond length on the behavior of adhesively bonded UHM-CFRP/Steel Double Lab Shear (DLS) Joints ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023, Volume 12 : Structures Track (Moncton, NB, Canada, May 24-27, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 506.
pp. 217-226.
Springer.
Ibrahim, Rony, Zemouri, Ryad, Tahan, Antoine, Kedjar, Bachir, Merkhouf, Arezki et Al-Haddad, Kamal.
2025.
« Early detection of rotor faults in large hydrogenerators using vibration measurements, variational autoencoder, and euclidean distance ».
IEEE Transactions on Industry Applications, vol. 61, nº 6.
pp. 9023-9032.
Imran, Ali, Beltrame, Giovanni et St-Onge, David.
2025.
« GNN-based decentralized perception in multi-robot systems for predicting worker actions ».
IEEE Robotics and Automation Letters, vol. 10, nº 6.
pp. 6336-6343.
Inshi, Saad, Chowdhury, Rasel, Taha, Mohammad Bany et Talhi, Chamseddine.
2025.
« Enhancing autonomy of context-aware self-healing in fog native environments ».
In Foundations and Practice of Security : 17th International Symposium, FPS 2024, Revised Selected Papers, Part I (Montréal, QC, Canada, Dec. 09-11, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15532.
pp. 336-350.
Springer.
Iqbal, Saeed, Choudhry, Imran Arshad, Ullah, Inam, Kaur, Kuljeet, Choi, Bong Jun et Hassan, Mohammad Mehedi.
2025.
« Domain adaptive FL for edge-enabled privacy-preserving MRI analysis ».
Alexandria Engineering Journal, vol. 128.
pp. 324-339.
Irandoostshahrestani, Misagh et Rousse, Daniel R..
2025.
« Optimizing off-grid PV/wind systems with battery and water storage for rural energy and water access ».
Journal of Energy Storage, vol. 140, nº Part B.
Ismael, Mhadi A., El-Adawy, Mohammed et Nemitallah, Medhat A. 2025. « Simulation study of mono and hybrid nanofluids for a battery thermal management system with different concentrations under high discharge conditions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Issa, Mohamad, Rizk, Patrick, Boulon, Loïc, Rezkallah, Miloud, Rizk, Rodrigue et Ilinca, Adrian.
2025.
« Smart, connected, and sustainable: The transformation of maritime ports through electrification, IoT, 5G, and green energy ».
Sustainability, vol. 17, nº 17.
Isukwem, Kindness, Hachem, Elie et Pereira, Anselmo. 2025. « Retraction of levitating drops ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Izadi, Mahdi et Frigaard, Ian. 2025. « A practical framework for modeling flow in uncertain geometries: Application to squeeze cementing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Jabbarzadeh, Armin et Shamsi, Meisam.
2025.
« Designing a resilient and sustainable multi-feedstock bioethanol supply chain: Integration of mathematical modeling and machine learning ».
Applied Energy, vol. 377, nº Part B.
Jaber, Khodr, Essel, Ebenezer et Sullivan, Pierre.
2025.
« Towards a GPU-native adaptive mesh refinement scheme for the lattice Boltzmann method in complex geometries ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Jaberi, Meisam, Dautremont, Charlotte et Poirier, Erik A..
2025.
« An evaluation of digital capabilities to enable a sustainable built asset industry: Developing a Consolidated Sustainability Matrix to inform digital use cases and practices ».
Journal of Building Engineering, vol. 114.
Jacobs, Grace R., Coleman, Michael J., Lewandowski, Kathryn E., Pasternak, Ofer, Cetin-Karayumak, Suheyla, Mesholam-Gately, Raquelle I., Wojcik, Joanne, Kennedy, Leda, Knyazhanskaya, Evdokiya, Reid, Benjamin, Swago, Sophia, Lyons, Monica G., Rizzoni, Elizabeth, John, Omar, Carrington, Holly, Kim, Nicholas, Kotler, Elana, Veale, Simone, Haidar, Anastasia, Prunier, Nicholas, Haaf, Moritz, Levitt, James J., Seitz-Holland, Johanna, Rathi, Yogesh, Kubicki, Marek, Keshavan, Matcheri S., Holt, Daphne J., Seidman, Larry J., Öngür, Dost, Breier, Alan, Bouix, Sylvain et Shenton, Martha E..
2025.
« An introduction to the human connectome project for early psychosis ».
Schizophrenia Bulletin, vol. 51, nº 3.
pp. 658-671.
Jacquet, Pierre, Coti, Camille, Dias De Assuncao, Marcos et Rouvoy, Romain.
2025.
« CINERGY: Reasoning over the worst case power consumption of cloud virtual machines ».
In IEEE 25th International Symposium on Cluster, Cloud and Internet Computing (CCGrid) (Tromso, Norway, May 19-22, 2025)
pp. 586-589.
Institute of Electrical and Electronics Engineers Inc..
Jafari, Moloud, Karganroudi, Sasan Sattarpanah, Rivest, Louis et Tahan, Souheil Antoine.
2025.
« Empirical quantification of uncertainty in iGPS measurements for assembly operations ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Jafary, Parham, Zareinia, Kourosh et Bougherara, Habiba. 2025. « Growth monitoring, yield estimation, and spatial mapping in vertical farms using computer vision and deep-learning models ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Jafri, Ahmed, Dadpour, Daryoush, Agelin-Chaab, Martin, Hangan, Horia et Peerhossaini, Hassan.
2025.
« Building energy estimation through experimental testing and simulation ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Jahanara, Hasti et Xu, Hang.
2025.
« Semi-continuum robot with discrete quantized deformation of bistable metastructure ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Jalali, Kiarash. 2025. « Fourier triad phase dynamics and singularity evolution in Burgers turbulence ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Jallouli, Wissem, Esmaeilkhah, Ahmad, Mokaddem, Mohamed Malek, Gagne, Jean-Marc et Landry, René Jr.
2025.
« Initial positioning results with decoded iridium NEXT signals using a TDOA approach ».
In Integrated Communications, Navigation and Surveillance Conference (ICNS) (Brussels, Belgium, Apr. 08-10, 2025)
Institute of Electrical and Electronics Engineers Inc..
Jamali, Abdeslam, Snaiki, Reda et Rahem, Ahmed.
2025.
« Towards accurate ice accretion and galloping risk maps for Quebec: A data-driven approach ».
Cold Regions Science and Technology, vol. 233.
Jaouhari, Mouad, Montecinos, Julio et Sboui, Lokman.
2025.
« Space and ground data routing via non-ISL LEO satellites for near real-time remote IoT connectivity ».
In IEEE International Conference on Communications Workshops (ICC Workshops) (Montreal, QC, Canada, June 08-12, 2025)
pp. 1870-1875.
Institute of Electrical and Electronics Engineers Inc..
Jard, Timothé et Snaiki, Reda.
2025.
« Real-time dynamic layout optimization for floating offshore wind farm control ».
Ocean Engineering, vol. 316.
Jarry, Florence, Dorfman, Anna, Pelletier-Dumas, Mathieu, Lina, Jean-Marc, Stolle, Dietlind, Lacourse, Éric, Dupéré, Véronique et de la Sablonnière, Roxane.
2025.
« Understanding the interplay between social isolation, age, and loneliness during the COVID-19 pandemic ».
Scientific Reports, vol. 15, nº 1.
Jaulin, Tom, Bocher, Philippe, Amar, Luc et Guilbault, Raynald. 2025. « Modeling of steel components hardened by induction and subjected to rolling contact fatigue ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Jean-Fulcrand, Annelise, Léger, Ewen, Dau, Frederic, Dube, Martine et Tabiai, Ilyass.
2025.
« Degradation mechanisms of CF/PPS, CF/PEI, and CF/PEEK under combined UV radiation and condensation ».
Composites Part A: Applied Science and Manufacturing, vol. 198.
Jelvehgar, Faramarz, Shakibaeinia, Ahmad et Jandaghian, Mojtaba. 2025. « A continuum-based mesh-free model for simulating floating granular materials ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Jeon, Bobae, Paquette, Eric, Mudur, Sudhir et Popa, Tiberiu.
2025.
« Personalized visual dubbing through virtual dubber and full head reenactment ».
In 46th Annual Conference on European Association for Computer Graphics, EUROGRAPHICS 2025 (London, England, May 12-16, 2025)
Coll. « EUROGRAPHICS, European Association for Computer Graphics Technical Report Series »
London, United kingdom : Eurographics Association.
Jeong, Wonjong, Yang, Jeongho, Choi, Joon Phil, Hwang, Ji Yong, Kim, Young Won, Park, Seong Je, Choi, Jae Won, Heogh, Woongbeom, Lee, Hoyoung, Park, Jinsoo, Jung, Min-Kyo, Lee, Ji Eun, Ryu, Ho Jin, Jang, Tae-Sik, Jung, Hyun-Do, Jahazi, Mohammad, Pasco, Jubert, Lee, Myoung-Gyu, Park, Hyejin, Moon, Seung Ki, Advincula, Rigoberto C., Kim, Sang Hoon et Aranas, Clodualdo.
2025.
« Al-based functionally graded super-intermetallic compounds for the turbine blade of a high-performance jet engine ».
Advanced Composites and Hybrid Materials, vol. 8, nº 6.
Jin, Willy, Caron, Jean-François et Ouellet-Plamondon, Claudiane M..
2025.
« Minimizing the carbon footprint of 3D printing concrete: Leveraging parametric LCA and neural networks through multiobjective optimization ».
Cement and Concrete Composites, vol. 157.
Jin, Willy, Ouellet-Plamondon, Claudiane et Caron, Jean-François.
2025.
« Multi-objective optimization of a sustainable LC3 mortar for 3D printing ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024, Volume 2, Simulation and Automation (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 629.
pp. 421-428.
Springer.
Jobidon, Gabriel.
2025.
« Climate adaptation laws in Quebec: normative lifecycle of public infrastructure projects in the light of participative democracy and collaborative governance ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2024, Volume 5: Environmental Engineering (Niagara Falls, ON, Canada, June 05-07, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 695.
pp. 47-60.
Springer.
Jobidon, Gabriel et Pellerin, Antoine.
2025.
« Achieving best value: Benefits and shortcomings of recent amendments to the Act respecting contracting by public bodies ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 3: Construction Management (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 630.
pp. 24-43.
Springer.
John, Omar, Wickham, Alana, Jung, Leonard B., Mirmajlesi, Anya S., Stearns, Jared, Breedlove, Katherine, Kim, Nicholas, Daneshvar, Daniel H., Billah, Tashrif, Pasternak, Ofer, Chamaria, Arushi, Coleman, Michael J., Tripodis, Yorghos, Adler, Charles H., Bernick, Charles, Balcer, Laura J., Rushmore, Richard Jarrett, Alosco, Michael L., Koerte, Inga K., Lin, Alexander P., Cummings, Jeffrey L., Reiman, Eric M., Stern, Robert A., Shenton, Martha E., Arciniega, Hector et Bouix, Sylvain.
2025.
« Shape analysis of the amygdala, hippocampus and thalamus in former American football players ».
Brain Communications, vol. 7, nº 6.
Jomaa, Walid, Daoud, Monzer, Javadi, Hamid et Bocher, Philippe.
2025.
« Cutting fluid effectiveness in the high-speed finish machining of Inconel 718 using a whisker-reinforced ceramic tool ».
Journal of Manufacturing and Materials Processing, vol. 9, nº 4.
Jones, Zachary, Drouin, Simon et Kersten-Oertel, Marta.
2025.
« Exploring interaction paradigms for segmenting medical images in virtual reality ».
International Journal of Computer Assisted Radiology and Surgery, vol. 20, nº 8.
pp. 1713-1721. Joney, Md Omar Faruq, He, Yuping et Lang, Haoxiang. 2025. « Design and modelling of autonomous articulated heavy vehicles ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Joney, Md Omar Faruq, He, Yuping et Lang, Haoxiang. 2025. « Dynamic performance analysis of autonomous multi-trailer articulated heavy vehicles with active trailer steering ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Jose, Sagar, Zemouri, Ryad, Nguyen, Khanh T. P., Medjaher, Kamal, Lévesque, Mélanie et Tahan, Antoine.
2025.
« Prognostics of complex machinery with sparse multilabel multimodal run-to-failure data: A graph neural network approach ».
Advanced Engineering Informatics, vol. 65, nº Part D.
Josi, Arthur, Alehdaghi, Mahdi, Cruz, Rafael M. O. et Granger, Eric.
2025.
« Fusion for visual-infrared person ReID in real-world surveillance using corrupted multimodal data ».
International Journal of Computer Vision.
Jouini, Nourhen, Bhouri, Maha, Brousseau, Jean, Dassylva-Raymond, Véronique et Deschênes, Jean-Sébastien. 2025. « CFD modeling of an air-argon binary gas mixture for optimizing argon distribution in a semi-closed enclosure under non-vacuum conditions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Joulaei, Amir, Rahmani, Hossein et Taghavi, Seyed Mohammad.
2025.
« AI-driven prediction of central plug morphology in Poiseuille flow of Bingham fluids with superhydrophobic walls ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Jouneghani, Romina Ardeshiri, Wang, Xu et Schiavone, Peter. 2025. « A compressible liquid inclusion of arbitrary shape in an isotropic elastic matrix ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Jung, Kumseok, Gascon-Samson, Julien, Gopalakrishnan, Sathish et Pattabiraman, Karthik.
2025.
« OneOS: Distributed operating system for the edge-to-cloud continuum ».
IEEE Transactions on Parallel and Distributed Systems, vol. 36, nº 6.
pp. 1175-1192.
Jung, Leonard B., Mirmajlesi, Anya S., Stearns, Jared, Breedlove, Katherine, John, Omar, Kim, Nicholas, Wickham, Alana, Su, Yi, Protas, Hillary, Baucom, Zachary H., Tuz-Zahra, Fatima, Tripodis, Yorghos, Daneshvar, Daniel H., Wiegand, Tim L. T., Billah, Tashrif, Pasternak, Ofer, Heller, Carina, Im, Brian S., Datta, Shae, Coleman, Michael J., Adler, Charles H., Bernick, Charles, Balcer, Laura J., Alosco, Michael L., Lin, Alexander P., Cummings, Jeffrey L., Reiman, Eric M., Stern, Robert A., Shenton, Martha E., Bouix, Sylvain, Koerte, Inga K. et Arciniega, Hector.
2025.
« Sulcal morphology in former American football players ».
Brain Communications, vol. 7, nº 5.
Justo, Jon Alvarez, Ghita, Alexandru, Kovac, Daniel, Garrett, Joseph L., Georgescu, Mariana-Iuliana, Gonzalez-Llorente, Jesus, Ionescu, Radu Tudor et Johansen, Tor Arne.
2025.
« Semantic segmentation in satellite hyperspectral imagery by deep learning ».
IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 18.
pp. 273-293.
Kabore, Aguerata, Bendouma, Mathieu et Ouellet-Plamondon, Claudiane.
2025.
« Numerical analysis of heavy cob walls’ hygrothermal behavior ».
Energy and Buildings, vol. 331.
Kabore, Aguerata, Bendouma, Mathieu et Ouellet-Plamondon, Claudiane.
2025.
« Study of the thermal behaviour of a low carbon material: The case of the cob ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023, Volume 4 : Construction Track (Moncton, NB, Canada, May 24-27, 2023)
Coll. « Lecture notes in civil engineering », vol. 498.
pp. 371-383.
Springer.
Kabore, Aguerata et Ouellet-Plamondon, Claudiane.
2025.
« Hygrothermal assessment of cob walls in cold conditions ».
In Multiphysics and Multiscale Building Physics : Proceedings of the 9th International Building Physics Conference (IBPC 2024) Volume 1: Moisture and Materials (Toronto, ON, Canada, July 25-27, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 552.
pp. 324-331.
Springer Nature.
Kaddoum, Georges, Selim, Bassant et Chehimi, Mahdi.
2025.
« Combating AI-based jamming in LEO satellite networks using quantum adversarial deep reinforcement learning ».
IEEE Transactions on Communications.
Kafaei, Amir, Gosselin, Louis, Alamdari, Houshang Darvishi et Taghavi, Seyed Mohammad.
2025.
« Fluid viscosity effects on carbon anode vibro-compaction ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Kali, Yassine, Saad, Maarouf et Benjelloun, Khalid.
2025.
« Chattering reduction via prescribed performance controller-based sliding mode for robotic systems ».
In 33rd Mediterranean Conference on Control and Automation (MED) (Tangier, Morocco, June10-13, 2025)
pp. 619-623.
Institute of Electrical and Electronics Engineers Inc..
Kalia, Nikhila, Mcconkey, Ryley, Yee, Eugene et Lien, Fue-Sang.
2025.
« Bayesian optimization of the GEKO turbulence model for predicting flow separation over a smooth surface ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Kalia, Nikhila, Mcconkey, Ryley, Yee, Eugene et Lien, Fue-Sang. 2025. « Kolmogorov-Arnold networks for turbulence anisotropy mapping ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Kamdem, B. M., Lemaire, R. et Nikiema, J..
2025.
« Characterization of the physicochemical and ignition properties of densified fuels produced from the co-processing of sawdust, miscanthus, and wheat straw ».
In Proceedings of Combustion Institute - Canadian Section, Spring Technical Meeting (Calgary, AB, Canada, May 12-15, 2025)
Kamdem, Brice Martial, Lemaire, Romain et Nikiema, Josiane.
2025.
« Characterization of the physicochemical properties of densified fuels produced from the co-processing of sawdust, miscanthus, and wheat straw: Analysis of the impact of the compaction force, the particle size and the feedstock mixing ratio ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Kamdem, Brice Martial, Lemaire, Romain et Nikiema, Josiane.
2025.
« Fuel briquettes produced via the co-treatment of wood sawdust, miscanthus and wheat straw: Physicochemical properties ».
Industrial Crops and Products, vol. 236.
Kamdem, Brice Martial, Lemaire, Romain et Nikiema, Josiane.
2025.
« Insight into the production factors influencing the physicochemical properties of densified briquettes comprising wood shavings and rice husk ».
Industrial Crops and Products, vol. 223.
Kamdoum, Marie-Rosine Djuidje, Provencher, Hélène, David, Eric, Kechaf, Youness et Seol, Yoon Duk.
2025.
« Evaluating turn insulation degradation using sweep frequency response analysis ».
In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025)
Institute of Electrical and Electronics Engineers Inc..
Kamil, Hamza, Soulaïmani, Azzeddine et Beljadid, Abdelaziz.
2025.
« A comparative study of physics-informed neural network strategies for modeling water and nitrogen transport in unsaturated soils ».
Journal of Hydrology, vol. 661, nº Part B.
Kamil, Hamza, Soulaïmani, Azzeddine et Beljadid, Abdelaziz.
2025.
« Physics-informed neural operators for efficient modeling of infiltration in porous media ».
Journal of Computational Physics, vol. 538.
Kamran, Maham, Li, Chengyu et Khalid, Muhammad Saif Ullah. 2025. « On the role of physiology and kinematics of biological swimmers to spread and suppress their odors in the wake ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Kanali, Mohamed Hosame, Tahan, Souheil-Antoine et Hof, Lucas. 2025. « 3D metrology-assisted assembly and augmented reality ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Kannan, Krishnaveni, Blancho, Florent, Rjab, Haifa, Lapointe, Mathieu et Tufenkji, Nathalie.
2025.
« Impact of fiber properties on floc formation and turbidity removal ».
Chemical Engineering Journal Advances, vol. 24.
Kansab, Samah, Bordeleau, Francis et Tizghadam, Ali.
2025.
« Are all code reviews the same? Identifying and assessing the impact of merge request deviations ».
In IEEE International Conference on Software Maintenance and Evolution (ICSME) (Auckland, New Zealand, Sept. 07-12, 2025)
pp. 308-320.
Institute of Electrical and Electronics Engineers Inc..
Kararwal, Deepak, Nkeck, Joel Edouard, Ropagnol, Xavier, Abraham, Emmanuel et Blanchard, François.
2025.
« Coupling properties of broadband terahertz pulses in a circular hollow-core waveguide ».
In Photonics North (PN) (Ottawa, ON, Canada, May 20-23, 2025)
Institute of Electrical and Electonics Engineers Inc..
Karevan, Ali et Nadeau, Sylvie.
2025.
« FRAM-PSO: A semi-quantitative framework integrating multi-dimensional sustainability criteria ».
Computers & Industrial Engineering, vol. 210.
Karevan, Ali et Nadeau, Sylvie.
2025.
« Fostering AI-human collaboration in industry 5.0 manufacturing ».
In Proceedings of the 22nd Congress of the International Ergonomics Association, Volume 2: Better Life Ergonomics for Future Humans (IEA 2024) (Jeju Island, Korea, Aug. 25-29, 2024)
Coll. « Springer Series in Design and Innovation », vol. 40.
pp. 457-463.
Springer.
Karevan, Ali et Nadeau, Sylvie.
8 septembre 2025.
« Making Manufacturing Smarter, Safer and More Sustainable ».
[Article de recherche]. Substance ÉTS.
Karevan, Ali et Nadeau, Sylvie.
8 septembre 2025.
« Rendre l’assemblage/désassemblage plus intelligent, plus sûr et plus durable ».
[Article de recherche]. Substance ÉTS.
Karimi, Samira, Helal, Emna, Pinto, Gabriel Matheus, Gutierrez, Giovanna, Moghimian, Nima, Vello, Tatiana Parra, Fechine, Guilhermino José Macêdo, David, Eric et Demarquette, Nicole.
2025.
« Effect of few-layer graphene (FLG) and relative photodegradation depth on the ductile to fragile transition of high-density polyethylene ».
Journal of Applied Polymer Science.
Karmakar, Raja, Kaddoum, Georges et Akhrif, Ouassima.
2025.
« IntSHU: A security-enabled intelligent soft handover approach for UAV-aided 5G and beyond ».
IEEE Transactions on Cognitive Communications and Networking.
Karmakar, Subir, Singh, Bhim, Chandra, Ambrish et Al-Haddad, Kamal.
2025.
« High-power voltage source converter for integration of battery in power system ».
IET Energy Systems Integration, vol. 7, nº 1.
Katsanis, Constantine, Lefebvre, Gabriel, Bedoya, Carlos et Boton, Conrad.
2025.
« Using change orders to measure the impact of building information modeling: A case study ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 445-458.
Springer Cham.
Katz, Melissa, Kry, Paul et Andrews, Sheldon.
2025.
« Rig my ride: Automatic rigging of physics-based vehicles for games ».
Proceedings of the ACM on Computer Graphics and Interactive Techniques, vol. 8, nº 4.
Kaur, Jashanpreet, Asadiankouhidehkordi, Golnoush, Singh, Vikram, Liberati, Andre C., Diraki, Ahmad, Bendahmane, Souhaila, Aloisio, Mark D., Patel, Payank, Henderson, Jeffrey, Ben Ettouil, Fadhel, Crudden, Cathleen M., Biesinger, Mark, Levasseur, Annie, Moreau, Christian et Mauzeroll, Janine.
2025.
« N-Heterocyclic carbene-promoted copper powder conditioning for thermal spray applications ».
Journal of Materials Chemistry A.
Kaveh, Kianoosh, Barati, Mansoor, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira.
2025.
« Degradation mechanisms of magnesia-carbon refractories in radiation heat-affected wall of steel electric arc furnace ».
Ceramics International, vol. 51, nº 25, Part C..
Kaveh, Kianoosh, Jahazi, Mohammad, Gallego, Paloma Isabel et Moosavi-Khoonsari, Elmira. 2025. « Effect of Cr2O3 in steel refining slag on the corrosion kinetics of MgO-C refractories ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Kazembeigi, Saeideh, Gosselin, Frédérick et Mélançon, David. 2025. « A deployable multi-faceted reflectarray antennas for space applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Kefene, Esayas Berhanu. 2025. « Advancing nanoporous arrays: Hierarchical NiS@Cu-Ni nanoporous arrays for ultra-stable lithium-ion battery anodes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Kenarkoohi, Mohammadreza et Hassan, Munzer.
2025.
« Seismic performance of circular concrete-encased steel columns for bridges ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 52, nº 12.
Kerkouche, Karim, Petit, Yvan, Rey, Clément, Rosi, Giuseppe, Combescure, Christelle et Wagnac, Eric. 2025. « Development of a snow sports helmet integrating a 3D-printed triply periodic minimal surface foam ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Kerriou, Raphael. 2025. « Recycling post-industrial polyester fibers ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Keshavan, Kiran Purushothama, Ghareghani, Mohammadsadegh Moradi, Hosseinnouri, Farimah, Agelin-Chaab, Martin et Hangan, Horia.
2025.
« Numerical and experimental investigation of snow accumulation on surfaces ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Keshavarzi, Samaneh, Momen, Gelareh, Harvey, Derek, Virk, Muhammad Shakeel et Jafari, Reza.
2025.
« Role of intermediate wetting states in ice adhesion and debonding mechanisms: An experimental and numerical investigation ».
Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 715.
Keshmiri, Mohammad, Singh, Shalini et Qureshi, Ahmed. 2025. « Meltpool temperature measurement and monitoring during wire-DED via optical thermal devices ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Khabaz, Baraa, Saad, Maarouf et Mehrjerdi, Hasan.
2025.
« Fault classification in distribution system utilizing imaging time-series, convolutional neural network and adaptive relay protection ».
Electric Power Systems Research, vol. 238.
Khafajeh, Ramin, Shamsaei, Mohsen, Irvani, Mohammad, Ezati Asl, Hossein et Vaillancourt, Michel.
2025.
« The development of a finite element model for the estimation of load transfer efficiency in transverse cracks of asphalt pavement ».
International Journal of Pavement Research and Technology, vol. 18, nº 1.
pp. 170-186.
Khaldi, Abdelhakim et Guilbault, Raynald.
2025.
« An optimization strategy applied to identify the optimal powertrain configurations for efficient electric vehicles ».
International Journal of Automotive Technology, vol. 26, nº 6.
pp. 1391-1409.
Khaled, Tarek, Hashala, Ahmed M., Ibrahem, Ibrahem M. A., Korashy, Mostafa, Akhrif, Ouassima et Bonev, Ilian.
2025.
« Neural network modeling for the Meca500 industrial robot: Practical implementation, validation, and testing ».
In International Telecommunications Conference (ITC-Egypt) (Cairo, Egypt, July 28-31, 2025)
pp. 279-284.
Institute of Electrical and Electronics Engineers Inc.. Khalfaoui, Karim, Moraga, Greco, Fischer, Alexander, Presas, Alexandre et Riedelbauch, Stefan. 2025. « On the application of flow simulation to predict the added damping and mass of vibrating water-submerged disc-like structures ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Khalilian, Niousha, Sehri, Mert, Hua, Zehui et Dumond, Patrick.
2025.
« Bearing fault diagnosis using traditional machine learning via ChatGPT ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Khameneh, Nahid Babazadeh, Cresson, Thierry, Lavoie, Frédéric, de Guise, Jacques et Vázquez, Carlos.
2025.
« Automatic CNN-based 3D/2D non-rigid registration platform for fast 3D femur reconstruction and clinical 3D measurements from Bi-planar radiographs ».
Computers in Biology and Medicine, vol. 196, nº Part A.
Khan, Irtiza, Corbett, Finley, Gerber, Andrew, Jeans, Tiger et Carretero, Juan.
2025.
« Automated 3D propeller modeling for integration into a shape optimization workflow ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Khan, Juveiria et Rizvi, Reza. 2025. « Biodegradable and flexible RFID electronics: Carbon-based eco-friendly materials for a circular economy ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Khan, Numan, Nadeau, Sylvie, Pham, Xuan-Tan et Boton, Conrad.
2025.
« Toward a decision support system for a toolbox meeting pertaining to roofing activities in construction ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023 : Construction Track (Moncton, NB, Canada, May 24-27, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 498.
pp. 275-286.
Springer Cham.
Khan, Sangrez, Ali-Pour, Amir, Avgeris, Marios, Gascon-Samson, Julien et Leivadeas, Aris.
2025.
« FEDORA: Federated Ensemble Reinforcement Learning for DAG-based task offloading and resource allocation in MEC ».
IEEE Internet of Things Journal, vol. 12, nº 21.
pp. 44228-44242.
Khan, Sangrez, Avgeris, Marios, Gascon-Samson, Julien et Leivadeas, Aris.
2025.
« EMDTORA: Energy-aware multi-user dependent task offloading and resource allocation in MEC using graph-enabled DRL ».
IEEE Transactions on Green Communications and Networking, vol. 9, nº 3.
pp. 1453-1469.
Khanday, Akid Mohi Ud Din, Bouktif, Salah et Ouni, Ali.
2025.
« Natural language processing in healthcare: Enhancing wellbeing through a COVID-19 case study ».
In
Wellness management powered by AI technologies.
pp. 55-74. John Wiley & Sons: Scrivener Publishing LLC.
Khapra, Tarun, Beigpour, Reza, Dehghanpour, Sajjad et Altenhof, William.
2025.
« Impact of lignin filler on mechanical properties and anisotropic behavior of compression moulded glass/polypropylene long fibre thermoplastics ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Khawaja, Hassan Abbas, Keshavarzi, Samaneh, Yousuf, Adeel, Muhammed, Manaf, Virk, Muhammad Shakeel, Harvey, Derek et Momen, Gelareh.
2025.
« Exploring heat transfer in freezing supercooled water droplet through high-speed infrared thermography ».
Cold Regions Science and Technology, vol. 229.
Kheirani, Afsaneh, Tabiai, Ilyass et St-Onge, David. 2025. « From strength to leakage: Extensive mechanical testing of a novel ultra-light membrane small indoor airship ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Khelifi, Jasem, Benzina, Yacine, Chouchen, Moataz, Ouni, Ali, Sayagh, Mohammed et Bouktif, Salah.
2025.
« GHAminer: An open source tool to extract GitHub actions build metrics ».
In IEEE International Conference on Software Analysis, Evolution and Reengineering (SANER) (Montreal, QC, Canada, Mar. 04-07, 2025)
pp. 834-838.
Institute of Electrical and Electronics Engineers Inc.. Khennich, Mohammed et Sarrafi, Ahamadreza. 2025. « Exergoeconomic analysis of Tesla turbine integration in CO2 heat pumps: Optimizing sustainability via transiting exergy ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Khezemi, Nour, Ejaz, Sikandar, Moha, Naouel et Guéhéneuc, Yann-Gaël.
2025.
« A comparison of code quality metrics and best practices in non-IoT and IoT systems ».
Internet of Things, vol. 34.
Khisa, Shreya, Elhattab, Mohamed, Assi, Chadi, Ghrayeb, Ali, Qaraqe, Marwa et Kaddoum, Georges.
2025.
« Coordinated full-duplex cooperative transmission with RSMA in multi-cell networks ».
IEEE Communications Letters.
Khorshidi, Siros et Saadatnia, Zia. 2025. « Investigating the static and dynamic behavior of a novel 3D foldable-twistable metastructure: Mathematical, simulation, and experimental analysis ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Khoshhava, Mojtaba Ayaz, Mosaddegh-Hesar, Hamidreza, Caron, Simon et Al-Haddad, Kamal.
2025.
« A robust sensorless full parameters identification algorithm for permanent magnet synchronous machines ».
In IEEE 34th International Symposium on Industrial Electronics (ISIE) (Toronto, ON, Canada, June 20-23, 2025)
Institute of Electrical and Electronics Engineers Inc..
Khoshkbari, Hesam, Kaddoum, Georges, Abbasi, Omid, Selim, Bassant et Yanikomeroglu, Halim.
2025.
« Beamforming for massive MIMO aerial communications: A robust and scalable DRL approach ».
IEEE Transactions on Communications.
Khoshkbari, Hesam, Kaddoum, Georges et Altamimi, Majid.
2025.
« A generalized deep hierarchical reinforcement learning for HAPS resource scheduler ».
In International Wireless Communications and Mobile Computing (IWCMC) (Abu Dhabi, UAE, May 12-16, 2025)
pp. 91-96.
Institute of Electrical and Electronics Engineers Inc..
Khoshkbari, Hesam, Kaddoum, Georges, Selim, Bassant, Abbasi, Omid et Yanikomeroglu, Halim.
2025.
« Distributed beamforming in massive MIMO communication for a constellation of airborne platform stations ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 4383-4388.
Institute of Electrical and Electronics Engineers Inc..
Kim, Daekeun, Urbanic, Jill et Carriveau, Rupp.
2025.
« Plant companion lighting system to enhance energy efficient agriculture in remote regions ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Kim, Janet, Lee, Taeyoung, Chang, Nathan R.S., Zhao, Jianxiang et Lee, Patrick C.. 2025. « Recyclable polyolefin-based micro-/nano-layered film/foam structures with tunable mechanical and thermal properties ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Klein, Fabrice et Pham Van Bang, Damien. 2025. « Operational digital twin of rivers ». Communication lors de la conférence : UN Ocean conference, ‘wave of change’ (Nice, France, 10 juin 2025).
Kniss, Christopher, Sharma, Abhishek, Phon, Ratanak, Shimonov, Gregory, Socher, Eran, Shrestha, Pragya R., Ramu, Karthick, Campbell, Jason P., Kakhki, Amin Pourvali, Al Hadi, Richard et Kim, Rod.
2025.
« Temperature-compensated multi-level CMOS modulators operating from 10 K to 300 K for cryogenic interconnects ».
IEEE Journal of Microwaves.
Kodie-Ampaw, Joseph Kwabena, Bonsi, Adime Kofi et Essel, Ebenezer Ekow.
2025.
« Unsteady wake characteristics of a notchback Ahmed body ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Kohan, Khashayar F., Limbourg, Raphaël et Nennemann, Bernd. 2025. « Cavitation pitting by inter-blade vortices on a high-head Francis turbine ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Kollias, Dimitrios, Tzirakis, Panagiotis, Cowen, Alan, Zafeiriou, Stefanos, Kotsia, Irene, Granger, Eric, Pedersoli, Marco, Bacon, Simon, Baird, Alice, Gagne, Chris, Shao, Chunchang, Hu, Guanyu, Belharbi, Soufiane et Aslam, Muhammad Haseeb.
2025.
« Advancements in affective and behavior analysis: The 8th ABAW workshop and competition ».
In IEEE/CVF Conference on Computer Vision and Pattern Recognition Workshops (CVPRW) (Nashville, TN, USA, June 11-12, 2025)
pp. 5572-5583.
IEEE Computer Society. Koojehri, Mehdi Nikkhah et Mctaggart-Cowan, Gordon. 2025. « Performance analysis of an onboard floating piston hydrogen compressor for high-pressure direct injection commercial vehicles across driving cycles ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Kouadio, D., Bouchard, C., Gauthier, J. et Zhang, K..
2025.
« L’identité numérique auto-souveraine : Principe clé de l’identité numérique nationale ».
Institut de gouvernance numérique (IGN); Chaire de recherche sur les contrats intelligents et la chaîne de blocs – Chambre des notaires du Québec (Université Laval); Chaire de recherche industrielle T-RIZE en application de systèmes de chaîne de blocs dur. 16 p.
Koulougli, Dahina, Nguyen, Kim Khoa et Cheriet, Mohamed.
2025.
« Cost optimization of FlexEthernet over elastic optical network fronthaul design ».
IEEE Transactions on Network and Service Management, vol. 22, nº 4.
pp. 3120-3137.
Kreitcberg, Alena, Trigui, Mohamed Khaled, Chandoul, Abdelberi, Pelletier, Roger et Demers, Vincent.
2025.
« Effect of temperature, heating rate, and cooling rate on bonding and nitriding of AlSi10Mg powder occurring during supersolidus liquid-phase sintering ».
Journal of Manufacturing and Materials Processing, vol. 9, nº 9.
Ktari, Aymen, Ghazzai, Hakim, Rouissi, Fatma, Sboui, Lokman et Setti, Gianluca.
2025.
« Dynamic data routing for non-ISL LEO satellite-based NT-IoT communications ».
IEEE Wireless Communications Letters.
Kubaski, Mauricio, Demarquette, Nicole R. et Zednik, Ricardo J..
2025.
« Fundamental material parameters governing the performance of polymer-based triboelectric touch sensors ».
Journal of Applied Polymer Science.
Kumar, Shiv, Kumbhani, Brijesh et Kaddoum, Georges.
2025.
« Finite blocklength analysis of active RIS-assisted FDTW communication with hardware impairments ».
IEEE Wireless Communications Letters, vol. 14, nº 9.
pp. 2992-2996.
Kumar, Varun, Budhiraja, Ishan, Singh, Akansha, Garg, Sahil, Kaddoum, Georges et Hassan, Mohammad Mehedi.
2025.
« Energy efficient resource allocation and trajectory optimization method for secure digital twin-enabled UAV-assisted MEC in 6G networks ».
Computer Networks, vol. 272.
Lachance-Tremblay, Éric, Rinieri, Manon, Lamothe, Sébastien et Vaillancourt, Michel.
2025.
« Applicability of the light-weight deflectometer (LWD) to assess the quality of cement-bitumen-treated materials (CBTM) in the Canadian context ».
Road Materials and Pavement Design, vol. 26, nº 7.
pp. 1782-1802. Lachguer, Lamyae, Hof, Lucas A. et Kenné, Jean-Pierre. 2025. « Optimization of lockout/tagout (LOTO) procedures using connected padlocks ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Laflamme, Simon, Guner, Bugrahan et Dagdeviren, Omur E..
2025.
« Standardizing force reconstruction in dynamic atomic force microscopy ».
Journal of Physical Chemistry Letters, vol. 16, nº 49.
pp. 12661-12667.
Lafreniere-Greig, J., Nkeck, J. E., Ahmad, R. et Blanchard, F..
2025.
« Communication protocol using terahertz metasurfaces ».
In Photonics North (PN) (Ottawa, ON, Canada, May 20-23, 2025)
Institute of Electrical and Electronics Engineers Inc..
Lahmiri, Salim, Tadj, Chakib et Gargour, Christian.
2025.
« Distinguishing between healthy and unhealthy newborns based on acoustic features and deep learning neural networks tuned by bayesian optimization and random search algorithm ».
Entropy, vol. 27, nº 11.
Lalonde-Larocque, Daphnée, Mezghani, Neila, Bureau, Nathalie J., Aissaoui, Rachid et Hagemeister, Nicola.
2025.
« Triaxial knee joint kinematics estimation from inertial measurement units using LSTM neural networks ».
[Article de conférence]. Multidisciplinary Biomechanics Journal, vol. 1006, nº 160.
Lame, Neda, Kadoch, Michel, Li, Qia et Hong, Tao.
2025.
« Dynamic load balancing with agent-based algorithm in Cloud Computing via OpenStack ».
In Information Processing and Network Provisioning, Third International Conference, ICIPNP 2024 Spring, Proceedings, Part I (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2416.
pp. 123-133.
Springer.
Lamothe, Sébastien, Rinieri, Manon, Vaillancourt, Michel et Lachance-Tremblay, Eric.
2025.
« Assessment of the quality of full-depth reclamation (FDR) using a dynamic cone penetrometer (DCP): a case study ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 52, nº 3.
pp. 334-345. Landry, Christophe et Houde, Sébastien. 2025. « Numerical investigations of the impacts of assembly tolerance on the performance of a multistage centrifugal pump ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Landry, Louis-Philippe, St-Jacques, Michèle et Tock, Sam. 2025. « Optimisation des opérations hivernales de la municipalité de Kirkland ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-13 mai 2025). Lanteigne, Jacques, Champliaud, Henri, Jahazi, Mohammad, Pham, Xuan-Tan et Nadi, Reza Bab. 2025. « Numerical prediction of fatigue crack propagation in E410NiMo and 13Cr-6Ni using finite element method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Lanzo, Melina, Shabani, Peyman, Li, Lucy et Laliberte, Jeremy. 2025. « Structural integrity assessment of type IV hydrogen pressure vessels: Drop testing and fatigue damage modelling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Laouadi, Abir et Langar, Rami.
2025.
« Energy and QoS-aware functional split selection in 5G and beyond O-RAN networks ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 3594-3599.
Institute of Electrical and Electronics Engineers Inc..
Lapointe, Mathieu, Jahandideh, Heidi, Alimi, Olubukola S., Farner, Jeffrey M. et Tufenkji, Nathalie.
2025.
« Sustainable granular materials improve removal of natural organic matter, turbidity and microplastics during adsorption, ballasted flocculation and granular filtration ».
Journal of Environmental Chemical Engineering, vol. 13, nº 2.
Largeau, Raphaël, Ménard, Pierre André et Ratté, Sylvie. 2025. « Classification automatique des erreurs en apprentissage de la lecture ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 5-9 mai 2025).
Larochelle Martin, Gilbert et Monfet, Danielle.
2025.
« Energy modelling and calibration of a controlled environment agriculture space in a cold climate using building performance simulation tools ».
In Building Simulation Applications (Bozen-Bolzano, Italy, June 26-28, 2024)
pp. 57-64.
bu.press.
Larochelle Martin, Gilbert et Monfet, Danielle.
2025.
« Toward integrated crop and building simulation for controlled environment agriculture using EnergyPlus ».
Energy Nexus, vol. 20.
Latulippe, Mathieu, Mayer, Jrr et Khameneifar, Farbod. 2025. « Inspecting damaged turbine blades with data fusion of coordinate measuring machines and 3D scanners ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Laurensi, Israel A., de Souza Britto Jr, Alceu, Barddal, Jean Paul et Koerich, Alessandro Lameiras.
2025.
« Alleviating catastrophic forgetting in facial expression recognition with emotion-centered models ».
In Pattern Recognition : 27th International Conference, ICPR 2024, Proceedings, Part IX (Kolkata, India, Dec. 01-05, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15309.
pp. 208-224.
Springer.
Lavoie, Philippe, Naboulsi, Diala et Gagnon, François.
2025.
« RF fingerprinting of base stations for network operator identification ».
In IEEE International Conference on Communications Workshops (ICC Workshops) (Montreal, QC, Canada, June 08-12, 2025)
pp. 2156-2161.
Institute of Electrical and Electronics Engineers Inc..
Le Gigan, Auriane, Leclerc, Aagathe, Martel, Jean-Luc, Dugué, Marie, Beaudry, Dominic, Abdeljelil, Ikram et Bérard, Sophie.
2025.
« A comprehensive inspection protocol to assess stormwater green infrastructure hydraulic performance: A case study for the city of Montreal ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2024, Volume 9: Hydrotechnical (Niagara Falls, ON, Canada, June 05-07, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 709.
pp. 253-257.
Springer.
Le Mouel, M., Matte, P., Hammouti, A. et Pham Van Bang, D..
2025.
« Investigation of 3D circulation and secondary flows in the St. Lawrence fluvial estuary at a tidal junction ».
Estuarine, Coastal and Shelf Science, vol. 313.
Le Mouel, Maëlys, Hammouti, Abdelkader et Pham Van Bang, Damien.
2025.
« Analysis of three-dimensional dynamics in the St. Lawrence fluvial estuary ».
In Proceedings of the 41st IAHR World Congress (Singapor, Singapor, June 22-27, 2025)
International Association of Hydro-Environmental Engineering and Research (IAHR). Le, Andy Vinh, Salame, Maya, Giansily-Blaizot, Muriel, Margeat, Emmanuel, Fenech, Marianne et Abkarian, Manouk. 2025. « Hemorheology using two foci fluorescence correlation spectroscopy ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Le, Than-Dung, Jouvet, Philippe et Noumeir, Rita.
2025.
« Improving transformer performance for french clinical notes classification using mixture of experts on a limited dataset ».
IEEE Journal of Translational Engineering in Health and Medicine, vol. 13.
pp. 261-274.
Le, Than-Dung, Nguyen, Ti Ti, Nguyen Ha, Vu, Chatzinotas, Symeon, Jouvet, Philippe et Noumeir, Rita.
2025.
« The impact of LoRA adapters on LLMs for clinical text classification under computational and data constraints ».
IEEE Access, vol. 13.
pp. 109365-109377.
Le, Van Hau, Nguyen, Ti Ti et Nguyen, Kim Khoa.
2025.
« Dual anti-jamming alleviation for radio frequency/free-space optical (RF/FSO) tactical systems ».
IEEE Transactions on Vehicular Technology, vol. 74, nº 1.
pp. 1092-1103. Leblond, Lugdivine, Wanaverbecq, Nicolas, Ramirez-Franco, Jorge et Evin, Morgane. 2025. « Anatomical analysis of mice spinal cord: Towards numerical modelling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Lebrun, Marion N., Dorber, Martin, Verones, Francesca et Henderson, Andrew D..
2025.
« Novel endpoint characterization factors for life cycle impact assessment of terrestrial acidification ».
Ecological Indicators, vol. 171.
Leclair, Jean-Philippe, Strugova, Daria, Cree, Duncan et Hof, Lucas A..
2025.
« Evaluation and characterization of waste-derived eggshells as filler in polylactic acid filament feedstock for material extrusion additive manufacturing: A step towards circular manufacturing strategies ».
Progress in Additive Manufacturing.
Leclerc, Etienne, Melancon, David et Vatandoost, Hossein. 2025. « Exploiting the nonlinear deformation of mechanical metamaterials for engineering applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Leclercq, Aurore, Czech, Anna, Mouret, Thibault, Lis, Marcin, Wrona, Adriana et Brailovski, Vladimir.
2025.
« Molybdenum 8wt% rhenium alloy processed by laser powder bed fusion: From powder production to mechanical testing at elevated temperatures ».
International Journal of Refractory Metals and Hard Materials, vol. 132.
Leclercq, Aurore, Mouret, Thibault et Brailovski, Vladimir. 2025. « Development of refractory metal manufacturing technology by laser powder bed fusion ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Leclercq, Aurore, Mouret, Thibault et Brailovski, Vladimir.
2025.
« Laser powder bed fusion of molybdenum: Density, structure and mechanical properties at room and elevated temperatures ».
Materials Science and Engineering: A, vol. 929.
Lecuru, Quentin, Ethier, Yannic, Carter, Alan et Karray, Mourad.
2025.
« Assessment of anisotropy in cold in-place recycled materials using shear wave velocity and computed tomography analysis ».
Infrastructures, vol. 10, nº 5.
Lecuru, Quentin, Ethier, Yannic, Carter, Alan et Karray, Mourad.
2025.
« Early-age stiffening of cold recycled bituminous materials using shear wave velocity ».
Journal of Testing and Evaluation.
Lee, Chanhaeng, Perepichka, Maksym, Ghorbani, Saeed, Mudur, Sudhir, Paquette, Eric et Popa, Tiberiu.
2025.
« Real-time neural cloth deformation using a compact latent space and a latent vector predictor ».
In Computer Vision – ECCV 2024 Workshops Proceedings, Part II (Milan, Italy, Sept. 29-Oct. 04, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15624.
pp. 358-373.
Springer.
Lee, J. L., Fraser, M., Philibert, A., Saint-Amour, D., Mergler, D. et Fillion, M..
2025.
« Mercury concentrations in historic autopsies from Grassy Narrows First Nation ».
Journal of the Neurological Sciences, vol. 471.
Lee, Patrick, Embabi, Mahmoud et Chang, Nathan. 2025. « Rheological characterization of flow-induced crystallization in extensional and shear flows: Implications for polymer foaming ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Lefebvre, Kim, Delestre, Clémence, Mezghani, Neila, Shabani, Bujar, Chèze, Laurence, Lustig, Sébastien, Vendittoli, Pascal-André, Lavigne, Patrick et Hagemeister, Nicola.
2025.
« Gait adaptations following anterior cruciate ligament rupture are sex specific ».
Knee, vol. 56.
pp. 168-177. Lefebvre, Marie, Guérineau, Julia et Zhuldybina, Mariia. 2025. « Exploration de l’application des principes de circularité au développement multidisciplinaire de produits : les technologies portables ». Communication lors de la conférence : Symposium CERIEC (Montréal, QC, Canada, 4 avril 2025). Leger, Pauline, Marois, Benjamin, Petit, Yvan, Naveaux, Franck Le, Benoit, David et Wagnac, Eric. 2025. « A novel video-based method to estimate helmet pad deformation during impact ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Legrene, Inoussa, Wong, Tony et Dessaint, Louis-A..
2025.
« Deep reinforcement learning approach for hybrid renewable energy systems optimization ».
Engineering Applications of Artificial Intelligence, vol. 159, nº Part B.
Legrene, Inoussa, Wong, Tony et Dessaint, Louis-A..
2025.
« Enhancing neural architecture search using transfer learning and dynamic search spaces for global horizontal irradiance prediction ».
Forecasting, vol. 7, nº 3.
Legrene, Inoussa, Wong, Tony, Mary, Nicolas et Dessaint, Louis-A..
2025.
« Reduction in microgrid topology selection time via hybrid branch and bound and k-nearest neighbors techniques ».
Mathematics, vol. 13, nº 3.
Lei, Huiyu, Yang, Xiaohua, Chen, Zhangsen, Rawach, Diane, Du, Lei, Liang, Zhenxing, Li, Dong-Sheng, Zhang, Gaixia, Tavares, Ana C. et Sun, Shuhui.
2025.
« Multiscale understanding of anion exchange membrane fuel cells: Mechanisms, electrocatalysts, polymers, and cell management ».
Advanced Materials, vol. 37, nº 8.
Lemaire, Romain. 2025. « An overview of the soot suppressing ability of oxygenated compounds considered as sustainable alternative transportation fuels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Lemayian, Joel Poncha, Bensalem, Hachem, Gagnon, Ghyslain, Zhang, Kaiwen et Giard, Pascal.
2025.
« EVMx: An FPGA-based smart contract processing unit ».
In IEEE 49th Annual Computers, Software, and Applications Conference (COMPSAC) (Toronto, ON, Canada, July 08-11, 2025)
pp. 1708-1713.
Institute of Electrical and Electronics Engineers Inc..
Lemayian, Joel Poncha, Gagnon, Ghyslain, Zhang, Kaiwen et Giard, Pascal.
2025.
« EVMx: An FPGA-based accelerator for smart contract processing ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems.
Lesage, A., Bourdeau, S., Caron, B. C. et Léger, P. M..
2025.
« Empowering non-designers with tangible tools for divergent thinking ».
Ergonomics.
Lessault, Thomas, Abo El Ezz, Ahmad et Nollet, Marie-José.
2025.
« Earthquake scenarios for seismic performance assessment of essential facilities: Case study of fire stations in Montreal ».
GeoHazards, vol. 6, nº 2.
Lestriez, Remi, Calvo, Daniel, Vallot, Alice et Joussot, Ludovic. 2025. « Modernizing a century-old hydropower plant: Redesign and optimization of a Francis runner ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Letissier, Camille, El Ghomari, Kenza, Gervais, Sylvie, Ahmarani, Léna et El Jalbout, Ramy.
2025.
« Magnetic resonance imaging-based assessment of bone marrow fat and T2 relaxation in adolescents with obesity and liver steatosis: A feasibility pilot study ».
Journal of Clinical Medicine, vol. 14, nº 21.
Leutcho, Gervais Dolvis, Gandubert, Gabriel, Woodward, Lyne et Blanchard, François.
2025.
« Electric-field-biased control of irregular oscillations via multistability in a nonlinear terahertz meta-atom ».
Chaos, Solitons and Fractals, vol. 198.
Leutcho, Gervais Dolvis, Gandubert, Gabriel, Woodward, Lyne et Blanchard, François.
2025.
« Multistability via field-enhanced carrier dynamics in a single-gap nonlinear terahertz split-ring resonator with loss parameter control ».
Physical Review E, vol. 111, nº 4.
Levasseur, Anthony, Pelletier-Dumas, Mathieu, Lacourse, Éric, Lina, Jean-Marc, Simonelli, G. et de la Sablonnière, R..
2025.
« Sleep duration and quality trajectories during the early days of the COVID-19 pandemic: a Canadian nationally representative study ».
BMC Public Health, vol. 25, nº 1.
Levere, Cole, Martinez, Kenneth, Vella, Mitchell, Varas, Nicholas et Seo, Jaho.
2025.
« Development of an autonomous strawberry harvesting robot ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Lévesque, Olivier, Huang, Jinxing et Dumas, Guy. 2025. « Numerical study and comparison of cavitation effects for an axial and a cross-flow hydrokinetic turbines ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Li, Haining, Liu, Kefu, Hamsayeh, Erfan, Li, Leping et Xu, Jason.
2025.
« Development of optimal lumped-parameter models for torsional vibration of shafts ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Li, Jianning, Zhou, Zongwei, Yang, Jiancheng, Pepe, Antonio, Gsaxner, Christina, Luijten, Gijs, Qu, Chongyu, Zhang, Tiezheng, Chen, Xiaoxi, Li, Wenxuan, Wodzinski, Marek, Friedrich, Paul, Xie, Kangxian, Jin, Yuan, Ambigapathy, Narmada, Nasca, Enrico, Solak, Naida, Melito, Gian Marco, Vu, Viet Duc, Memon, Afaque R., Schlachta, Christopher, De Ribaupierre, Sandrine, Patel, Rajnikant, Eagleson, Roy, Chen, Xiaojun, Mächler, Heinrich, Kirschke, Jan Stefan, de la Rosa, Ezequiel, Christ, Patrick Ferdinand, Li, Hongwei Bran, Ellis, David G., Aizenberg, Michele R., Gatidis, Sergios, Küstner, Thomas, Shusharina, Nadya, Heller, Nicholas, Andrearczyk, Vincent, Depeursinge, Adrien, Hatt, Mathieu, Sekuboyina, Anjany, Löffler, Maximilian T., Liebl, Hans, Dorent, Reuben, Vercauteren, Tom, Shapey, Jonathan, Kujawa, Aaron, Cornelissen, Stefan, Langenhuizen, Patrick, Ben-Hamadou, Achraf, Rekik, Ahmed, Pujades, Sergi, Boyer, Edmond, Bolelli, Federico, Grana, Costantino, Lumetti, Luca, Salehi, Hamidreza, Ma, Jun, Zhang, Yao, Gharleghi, Ramtin, Beier, Susann, Sowmya, Arcot, Garza-Villarreal, Eduardo A., Balducci, Thania, Angeles-Valdez, Diego, Souza, Roberto, Rittner, Leticia, Frayne, Richard, Ji, Yuanfeng, Ferrari, Vincenzo, Chatterjee, Soumick, Dubost, Florian, Schreiber, Stefanie, Mattern, Hendrik, Speck, Oliver, Haehn, Daniel, John, Christoph, Nürnberger, Andreas, Pedrosa, João, Ferreira, Carlos, Aresta, Guilherme, Cunha, António, Campilho, Aurélio, Suter, Yannick, Garcia, Jose, Lalande, Alain, Vandenbossche, Vicky, Van Oevelen, Aline, Duquesne, Kate, Mekhzoum, Hamza, Vandemeulebroucke, Jef, Audenaert, Emmanuel, Krebs, Claudia, van Leeuwen, Timo, Vereecke, Evie, Heidemeyer, Hauke, Röhrig, Rainer, Hölzle, Frank, Badeli, Vahid, Krieger, Kathrin et Gunzer, Matthias.
2025.
« MedShapeNet - a large-scale dataset of 3D medical shapes for computer vision ».
Biomedizinische Technik, vol. 70, nº 1.
pp. 71-90. Li, Jin et Zhang, Youmin. 2025. « Security and resilience in cyber-physical systems for smart grids ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Li, Long, Pao, Wing Yi, Agelin-Chaab, Martin, Komar, John et Lang, Haoxiang.
2025.
« Investigating automotive sensor perception in rain: A case study on TOF and FMCW LiDAR ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Li, Sihan, Timofeev, Evgeny et Oyedele, Oluwakayode. 2025. « Navier-Stokes simulations of shock wave reflection from the axis of symmetry ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Li, Xia. 2025. « Development of safe and high-performance next generation batteries ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Li, Youjian, Sarvestani, Hamidreza Yazdani, Mofatteh, Hossein, Karamzadeh, Vahid, Ashrafi, Behnam, Gholipour, Javad et Akbarzadeh, Abdolhamid. 2025. « Mechanical characterization of porous 3D-printed polymer-derived ceramics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Li, Zhao, Chen, Kuiying et Jin, Tao.
2025.
« Parallelized and adaptively refined phase-field monolithic scheme for brittle crack simulation ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Li, Zhipeng et Zhang, Junfeng. 2025. « A comprehensive computer model for thermal flows of moist air through porous media ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Liang, Zhaokun, Cai, Guofa, He, Jiguang, Kaddoum, Georges et Huang, Chongwen.
2025.
« Performance analysis of Multi-RIS-Aided LoRa systems with outdated and imperfect CSI ».
IEEE Transactions on Communications, vol. 73, nº 7.
pp. 4647-4661. Liaw, Kim Leong, Zolfagharroshan, Mohammad, Tareen, Muhammad S. K. et Sasmito, Agus P.. 2025. « Carbon dioxide two-phase closed thermosyphon for ground freezing applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Lichère, F., Pellerin, A., Jobidon, G., Meynier-Pozzi, A., Azevedo, P., Botta, G. et Strelchouk, C..
2025.
« Green public procurement: Lessons from the fields: Canada, France, Italy, Portugal, Netherlands and Switzerland ».
Presses de l'Université Laval. 300 p.
Liddo, Anthony Di, Ahmadfard, Mohammadamin et Dworkin, Seth.
2025.
« Modelling thermal performance of helical steel piles ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Liebert, Julia, Castillo, Federico, Labbé, Jean-Philippe, Maciazek, Tomasz et Schilling, Christian.
2025.
« Solving one-body ensemble N-representability problems with spin ».
Quantum, vol. 9.
Limam, Amel, Mebarki, Chahrazad, Derradji, Lotfi, Calabrese, Nicolandrea, Morini, Marco, Merabtine, Abdelatif et Caffari, Francesca.
2025.
« Comprehensive energy retrofit of a 1950s office building in Algeria: Toward 2030 efficiency goals in mediterranean climates ».
Buildings, vol. 15, nº 23.
Liogier, Louis, Henderson, Andrew et Hof, Lucas.
2025.
« Life cycle assessment of the spark assisted chemical engraving (SACE) micro-machining method ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Liu, Gang et Mayer, J. R. René. 2025. « Identification of machine errors in a small volume by 3D ball probing measurement ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Liu, Lei, Wang, Jie et Kadoch, Michel.
2025.
« Interference study of 5G network deployment on meteorological satellite system in 1800 MHz Band ».
In Information Processing and Network Provisioning. Third International Conference, ICIPNP 2024 Spring, Proceedings, Part IV (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2419.
pp. 29-41.
Springer.
Liu, Lei, Wang, Jie, Xie, Weiliang et Kadoch, Michel.
2025.
« Machine learning for dynamic spectrum allocation in 6G non-terrestrial networks ».
In Information Processing and Network Provisioning, Third International Conference, ICIPNP 2024 Spring, Proceedings, Part IV (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2419.
pp. 315-328.
Springer.
Liu, Tingting, Chen, Zhangsen, Liu, Sixiang, Wang, Pan, Pu, Zonghua, Zhang, Gaixia et Sun, Shuhui.
2025.
« Ultrafast synthesis of IrB1.15 nanocrystals for efficient chlorine and hydrogen evolution reactions in saline water ».
Angewandte Chemie-International Edition, vol. 64, nº 5.
Liu, Weiqiang, Cecere, Renzo et Mongrain, Rosaire. 2025. « Multiscale modeling of drug diffusion in cardiovascular collagen networks using physics-informed neural networks ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Liu, Wenjie, Rahmani, Hossein, Larachi, Faïçal et Taghavi, Seyed Mohammad.
2025.
« Numerical analysis of buoyancy-driven immiscible exchange flows in axially rotating pipes ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Liu, Yunpu, Ren, Mengke, Li, Zheng, Gu, Junfeng, Ruan, Shilun et Shen, Changyu. 2025. « Multiscale simulation of polymer injection molding filling flow with welding line formation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Lizama, Elizabet, Somos-Valenzuela, Marcelo, Rivera, Diego, Lillo, Mario, Morales, Bastian, Baraër, Michel et Fernández, Alfonso.
2025.
« Role of mountain glaciers in the hydrological dynamics of headwater basins in the Wet Andes ».
Journal of Hydrology, vol. 649.
Llave Ponce de Leon, Bruno et Iordanova, Ivanka.
2025.
« BIM-based configuration system for an early design stage of modular residential projects ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2024, Volume 3: Engineering Management (Niagara Falls, ON, Canada, June 05-07, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 697.
pp. 157-168.
Springer.
Llave, Bruno et Iordanova, Ivanka.
2025.
« Digital configuration platforms for residential modular construction projects: A comparative study ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 298-313.
Springer.
Lombard, Eloi et Bélanger, Pierre.
2025.
« Characterization and classification of flaws in PAUT using a convolutional neural network ».
In SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025)
Coll. « Proceedings of SPIE », vol. 13438.
SPIE.
Long, Da et Yang, Sheng.
2025.
« Deep learning-based fatigue detection using kinematic information from videos ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
https://doi.org/10.82417/6mtg-8x59 :
Lopez, Maël, Benchikh Le Hocine, Alla Eddine, Kone, Tenon Charly, Dupont, Thomas et Panneton, Raymond.
2025.
« Inertial effects on single-perforation plates resistivity at high flow rates: Computational fluid dynamics and experimental studies ».
Journal of the Acoustical Society of America, vol. 157, nº 2.
pp. 1512-1522.
Lopez, Maël, Kone, Tenon Charly, Benchikh Le Hocine, Alla Eddine, Dupont, Thomas et Panneton, Raymond.
2025.
« Mass-spring model for a perforated periodic metamaterial in nonlinear regime ».
Journal of the Acoustical Society of America, vol. 157, nº 4.
pp. 3192-3203.
López, Rubén R., Ben El Khyat, Chaymaa Zouggari, Chen, Yunxi, Tsering, Thupten, Dickinson, Kyle, Bustamante, Prisca, Erzingatzian, Armen, Bartolomucci, Alexandra, Ferrier, Sarah Tadhg, Douanne, Noélie, Mounier, Catherine, Stiharu, Ion, Nerguizian, Vahé et Burnier, Julia V..
2025.
« A synthetic model of bioinspired liposomes to study cancer-cell derived extracellular vesicles and their uptake by recipient cells ».
Scientific Reports, vol. 15, nº 1.
Loucif, Abdelhalim, Shahriari, Davood, Chadha, Kanwal, Zhang, Chunping, Morin, Jean-Benoit et Jahazi, Mohammad.
2025.
« Effect of cooling rate on the as-cast microstructure of a high strength steel produced in a large size ingot ».
Key Engineering Materials, vol. 1016.
pp. 9-14.
Lu, Emilie, Le, Thanh-Dung, Jouvet, Philippe et Noumeir, Rita.
2025.
« Heart rate and body temperature relationship in children admitted to PICU - A machine learning approach ».
IEEE Transactions on Biomedical Engineering, vol. 72, nº 8.
pp. 2352-2365.
Luan Nguyen, Thanh, Kaddoum, Georges, Nhu Do, Tri et Haas, Zygmunt J..
2025.
« Ground-to-UAV and RIS-assisted UAV-to-ground communication under channel aging: Statistical characterization and outage performance ».
IEEE Transactions on Communications, vol. 73, nº 9.
pp. 8062-8079.
Luchini, Thibaud, Saillant, Maxime, Fotsing, Édith Roland, Tuysuz, Oguzhan et Ross, Annie.
2025.
« A multidisciplinary method for simulation guided design of mechanical structures ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ly, Monica T., Altaras, Caroline, Tripodis, Yorghos, Adler, Charles H., Balcer, Laura J., Bernick, Charles, Zetterberg, Henrik, Blennow, Kaj, Peskind, Elaine R., Banks, Sarah J., Barr, William B., Wethe, Jennifer V., Lenio, Steve, Bondi, Mark W., Delano-Wood, Lisa M., Cantu, Robert C., Coleman, Michael J., Dodick, David W., Mez, Jesse, Daneshvar, Daniel H., Palmisano, Joseph N., Martin, Brett, Lin, Alexander P., Koerte, Inga K., Bouix, Sylvain, Cummings, Jeffrey L., Reiman, Eric M., Shenton, Martha E., Stern, Robert A. et Alosco, Michael L..
2025.
« Single- versus two-test criteria for cognitive impairment: Associations with CSF and imaging markers in former American football players ».
Clinical Neuropsychologist.
Macrobbie, Connor, Wang, Anqi et Wen, John. 2025. « Combustion and resultant structures of lunar regolith based microthermite powders ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Madhavan, Pramoth Varsan, Shahgaldi, Samaneh et Li, Xianguo. 2025. « Long short-term memory time series modelling of pressure valves for hydrogen-powered vehicles and infrastructure ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Madiega, Blaise et Olivier, Mathieu. 2025. « Incremental time-stepping U-Net LSTM for transient CFD: Forecasting unsteady flow dynamics from limited timesteps ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Madiega, Blaise, Olivier, Mathieu, Alahassa, Konrad Tagnon Amen et Brou, Christ-Marie Anzian.
2025.
« Enhancing noisy PIV measurements through signal processing and machine learning techniques ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Maduche, Trish Anesu, Mongeau, Luc, Kronish, Amanda et Morales, Christopher.
2025.
« Shape optimization of a quiet and efficient synthetic jet actuator enclosure using COMSOL Multiphysics ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Maghrebi, Youssef, Elhattab, Mohamed, Assi, Chadi, Ghrayeb, Ali et Kaddoum, Georges.
2025.
« Movable antennas in wireless systems: A tool for connectivity or a new security threat? ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 3351-3356.
Institute of Electrical and Electronics Engineers Inc..
Magraoui, Chaima, Derradji, Lotfi, Hamid, Abdelkader, Oukaci, Soumia, Limam, Amel et Merabtine, Abdelatif.
2025.
« A smart roller shutters control for enhancing thermal comfort and sustainable energy efficiency in office buildings ».
Sustainability, vol. 17, nº 5.
Mahmoudi, Ali, Afshari, Hamid, Sarhadi, Hassan et Jabbarzadeh, Armin.
2025.
« Mitigating urban pollution: A comparative life cycle assessment of hydrogen, electric, and diesel buses for urban transportation ».
International Journal of Hydrogen Energy, vol. 125.
pp. 333-353.
Mahmoudi, Ali, Afshari, Hamid, Sarhadi, Hassan et Jabbarzadeh, Armin.
2025.
« Transitioning to green urban logistics: The role of passenger preferences and the government policy ».
[Article de conférence]. IFAC-PapersOnLine, vol. 59, nº 10.
pp. 2141-2146.
Mahmoudi, Brahim, Trabelsi, Imen, Tamzalit, Dalila, Moha, Naouel et Guéhéneuc, Yann-Gaël.
2025.
« BOAM: A business oriented identification approach of microservices within legacy systems ».
In Service-Oriented Computing : 22nd International Conference, ICSOC 2024, Proceedings, Part II (Tunis, Tunisia, Dec. 03-06, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15405.
pp. 123-137.
Springer. Mahmud, Safayet, Bertuccio, Antonio et Jianu, Ofelia A.. 2025. « Thermal management of batteries using composite PCMs and active refrigerant cooling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Maia, Cynthia Moreira, de Amorim, Lucas B. V., Cavalcanti, George D. C. et Cruz, Rafael M. O..
2025.
« MetaML: a multi-label meta-learning approach for pipeline recommendation ».
Machine Learning, vol. 114, nº 12.
Maia, Cynthia Moreira, de Amorim, Lucas B. V., Cavalcanti, George D. C. et Cruz, Rafael M. O..
2025.
« PIPES: A meta-dataset of machine learning pipelines ».
In International Joint Conference on Neural Networks (IJCNN) (Rome, Italy, June 30-July 05, 2025)
Institute of Electrical and Electronics Engineers Inc..
Majdabadi, Mohammad Mahmoudi et Koohi-Fayegh, Seama.
2025.
« Techno-economic assessment of dual-source heat pump systems: Borehole size reduction and life-cycle cost analysis across three cities in Canada ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Makris, Christopher, Ghasemi, Abbas et Li, Xianguo. 2025. « Computationally efficient optimization of PEM fuel cell design and operating parameters ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Malek Mokaddem, Mohamed, Reynaud, Florian, Isselin, Dorian, Amrhar, Abdessamad, Gagne, Jean-Marc et Landry, René.
2025.
« Flight test performances of SDR avionics on RFSOC 4x2 running with certifiable RTOS environment ».
In Integrated Communications, Navigation and Surveillance Conference (ICNS) (Brussels, Belgium, Apr. 08-10, 2025)
Institute of Electrical and Electronics Engineers Inc.. Malekpour, Farshad, Abdali, Marjan, Hojjati, Mehdi et Skonieczny, Krzysztof. 2025. « Additive manufacturing and characterization of PEKK/Martian-regolith composite for lightweight and sustainable space applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Maleksabet, Zahra, Kozinski, Janusz et Tarokh, Ali. 2025. « Investigation of aerodynamic characteristics of iced wind turbine blade ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mallek, Fares, Vázquez, Carlos et Paquette, Eric.
2025.
« Parametric model fitting for textured and animatable 3D avatar from a single frontal image of a clothed human ».
Computers and Graphics, vol. 133.
Manitiu, Anton, Mazy, David, Mehrpouyan, Sepehr, Bayol, Alexia, Hagemeister, Nicola et Nault, Marie-Lyne.
2025.
« Knee kinesiography for dynamic assessment of anterior cruciate ligament ruptures: Potential for a pediatric application ».
Journal of Orthopaedic Reports.
Manjunath, Balasubramanya, Ouellet-Plamondon, Claudiane M., Das, B. B. et Bhojaraju, Chandrasekhar.
2025.
« Optimizing nutmeg shell biochar production temperature for enhanced cement composite performance ».
Journal of Sustainable Cement-Based Materials.
Manlius, Thais, Delteil, Clémence, Godio-Raboutet, Yves, Simeone, Pierre, Wagnac, Eric, Bailly, Nicolas et Thollon, Lionel. 2025. « Method to reverse-engineer head impact conditions leading to a traumatic brain injury by combining CT and MRI images and a finite element model of the head and brain ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mansour Salamé, Joseph, Leroy, Yann, Nicolaï, Isabelle et Saïdani, Michael.
2025.
« How does circular economy disrupt business models: The case of ballast reuse in railway projects ».
In Transport Transitions: Advancing Sustainable and Inclusive Mobility: Proceedings of the 10th TRA Conference, 2024 - Volume 4: Clean Energy Transition (Dublin, Ireland, Apr. 15-18, 2024)
Coll. « Lecture Notes in Mobility »
pp. 740-746.
Springer.
Mansour Salamé, Joseph, Nicolaï, Isabelle, Saidani, Michael et Leroy, Yann.
2025.
« Enhancing and monitoring the environmental performance of complex industrial projects: A communication-based approach ».
Cleaner Environmental Systems, vol. 18.
Marcil-St-Onge, Gabriel, Chandoul, Abdelberi, Thomas, Yannig, Pelletier, Roger, Lefebvre, Louis-Philippe et Demers, Vincent.
2025.
« Material extrusion additive manufacturing of aluminum-based feedstocks ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Marcoux, Isabelle, Ménard, Lucie et Laporte, Catherine.
2025.
« Usability of two ultrasound tongue imaging devices in speech-language pathology ».
American Journal of Speech-Language Pathology, vol. 34, nº 3.
pp. 1407-1424. Maroufkhani, Aida et Morency, François. 2025. « Simulation-based evaluation of runway deicing products ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Maroufkhani, Mohammad, Khodabandeh, Alireza, Radu, Iulian et Jahazi, Mohammad.
2025.
« Hybrid GTAW–FCAW of 316L stainless steel pipes: Influence of oxygen content in baking gas and surface preparation on oxide characteristics and corrosion behavior ».
Journal of Manufacturing and Materials Processing, vol. 9, nº 11.
Maroufkhani, Mohammad, Khodabandeh, Alireza, Radu, Iulian, Moosavi-Khoonsari, Elmira et Jahazi, Mohammad.
2025.
« Thermodynamic and kinetic analyses of high temperature oxidation of 316L stainless steel ».
Results in Materials, vol. 28.
Marsac, Paul, Bocci, Edoardo, Cardone, Fabrizio, Falchetto, Augusto Cannone, Wang, Di, Carbonneau, Xavier, Zaumanis, Martins, Carter, Alan, Carmen Rubio-Gámez, M., Del Sol Sánchez, Miguel, Dave, Eshan V. et Tebaldi, Gabriele.
2025.
« Evaluation of warm mix asphalts with high reclaimed asphalt content ».
In
Recycling asphalt pavement: State-of-the-art of the RILEM technical committee 264-RAP.
Coll. « RILEM State-of-the-Art Reports », vol. 44.
pp. 99-115. Springer Science and Business Media B.V..
Martel, Jean-Luc, Arsenault, Richard, Turcotte, Richard, Castañeda-Gonzalez, Mariana, Brissette, François, Armstrong, William, Mailhot, Edouard, Pelletier-Dumont, Jasmine, Lachance-Cloutier, Simon, Rondeau-Genesse, Gabriel et Caron, Louis-Philippe.
2025.
« Exploring the ability of LSTM-based hydrological models to simulate streamflow time series for flood frequency analysis ».
Hydrology and Earth System Sciences, vol. 29, nº 19.
pp. 4951-4968.
Martel, Jean-Luc, Brissette, François, Arsenault, Richard, Turcotte, Richard, Castañeda-Gonzalez, Mariana, Armstrong, William, Mailhot, Edouard, Pelletier-Dumont, Jasmine, Rondeau-Genesse, Gabriel et Caron, Louis-Philippe.
2025.
« Assessing the adequacy of traditional hydrological models for climate change impact studies: A case for long short-term memory (LSTM) neural networks ».
Hydrology and Earth System Sciences, vol. 29, nº 13.
pp. 2811-2836.
Martel, Jean-Luc, Fortin, Vincent, Turcotte, Richard, Poulin, Annie et Arsenault, Richard.
2025.
« MOHYSE - a simple lumped hydrological model for educational and research purposes ».
Canadian Water Resources Journal = Revue canadienne des ressources hydriques.
Martin, Alexis et Voix, Jérémie (inventeurs) 25 mars 2025. « System and method for determining cardiac rhythm and/or respiratory rate ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,257,101.
Martin, R. G., Jonasson, C., Johansson, C., Tavares, J. R. et Dubé, M..
2025.
« 3D-printing magnetic susceptor filament for induction welding of thermoplastic composite sandwich panels ».
Composites Communications, vol. 55.
Martinez, Kenneth, Workman, Riley, Masud, Md Shafakat et Lang, Haoxiang.
2025.
« GRASP-01: A low-cost 7 degree of freedom humanoid robotic arm ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Mary, Nicolas et Dessaint, Louis- A..
2025.
« Robust model predictive control of battery energy storage with neural network forecasting for peak shaving in university campus ».
Journal of Building Engineering, vol. 107.
Masmoudi, Nizar et Jaafar, Wael.
2025.
« OCD-FL: A novel communication-efficient peer selection-based decentralized federated learning ».
IEEE Transactions on Vehicular Technology, vol. 74, nº 4.
pp. 6856-6861.
Masson, Catherine, Bailly, Nicolas, Troude, Lucas, Guesneau, Marianne, Arnoux, Pierre-Jean et Beauséjour, Marie-Hélène.
2025.
« Investigating head impact dynamics and cervical spine injuries in karting rollovers: An initial assessment of neck brace efficacy ».
In Conference proceedings International Research Council on the Biomechanics of Injury (IRCOBI) (Vilnius, Lithuania, Sept. 10-12, 2025)
International Research Council on the Biomechanics of Injury. Mastroianni, Michael-Anthony, Bodkhe, Sampada et Kadem, Lyes. 2025. « Experimental investigation of the flow generated by a flexible, flapping membrane based on a soft electromagnetic actuator ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Masud, Md Shafakat, Liu, Xiaolong, Martinez, Kenneth, Workman, Riley, Lang, Haxiang et Ren, Jing.
2025.
« Development of AI-driven universal robot with vision perception for robotic manipulation ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Mateur, Wael, Songmene, Victor, Kouam, Jules et Bahloul, Ali.
2025.
« Optimization of wet edge finishing of natural stones: Influence of tool geometry, grit size and cutting conditions ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Mathalon, Daniel H., Nicholas, Spero, Roach, Brian J., Billah, Tashrif, Lavoie, Suzie, Whitford, Thomas, Hamilton, Holly K., Addamo, Lauren, Anohkin, Andrey, Bekinschtein, Tristan, Belger, Aysenil, Buccilli, Kate, Cahill, John, Carrión, Ricardo E., Damiani, Stefano, Dzafic, Ilvana, Ebdrup, Bjørn H., Izyurov, Igor, Jarcho, Johanna, Jenni, Raoul, Jo, Anna, Kerins, Sarah, Lee, Clarice, Martin, Elizabeth A., Mayol-Troncoso, Rocio, Niznikiewicz, Margaret A., Parvaz, Muhammad, Pogarell, Oliver, Prieto-Montalvo, Julio, Rabin, Rachel, Roalf, David R., Rogers, Jack, Salisbury, Dean F., Shaik, Riaz, Shankman, Stewart, Stevens, Michael C., Suen, Yi Nam, Swann, Nicole C., Tang, Xiaochen, Thompson, Judy L., Tso, Ivy, Wenzel, Julian, Zhou, Juan Helen, Addington, Jean, Alameda, Luis, Arango, Celso, Breitborde, Nicholas J. K., Broome, Matthew R., Cadenhead, Kristin S., Calkins, Monica E., Castillo-Passi, Rolando I., Chen, Eric Yu Hai, Choi, Jimmy, Conus, Philippe, Corcoran, Cheryl M., Cornblatt, Barbara A., Diaz-Caneja, Covadonga M., Ellman, Lauren M., Fusar-Poli, Paolo, Gaspar, Pablo A., Gerber, Carla, Glenthøj, Louise Birkedal, Horton, Leslie E., Hui, Christy Lai Ming, Kambeitz, Joseph, Kambeitz-Ilankovic, Lana, Keshavan, Matcheri S., Kim, Minah, Kim, Sung-Wan, Koutsouleris, Nikolaos, Kwon, Jun Soo, Langbein, Kerstin, Mamah, Daniel, Mittal, Vijay A., Nordentoft, Merete, Pearlson, Godfrey D., Perez, Jesus, Perkins, Diana O., Powers, Albert R., Sabb, Fred W., Schiffman, Jason, Shah, Jai L., Silverstein, Steven M., Smesny, Stefan, Stone, William S., Strauss, Gregory P., Upthegrove, Rachel, Verma, Swapna K., Wang, Jijun, Wolf, Daniel H., Zhang, Tianhong, Bouix, Sylvain, Pasternak, Ofer, Cho, Kang-Ik K., Coleman, Michael J., Dwyer, Dominic, Nunez, Angela, Tamayo, Zailyn, Wood, Stephen J. et Kahn, Rene S..
2025.
« The electroencephalography protocol for the Accelerating Medicines Partnership® Schizophrenia Program: Reliability and stability of measures ».
Schizophrenia, vol. 11, nº 1.
Matzkin, Franco, Larrazabal, Agostina, Milone, Diego H., Dolz, José et Ferrante, Enzo.
2025.
« Towards reliable WMH segmentation under domain shift: An application study using maximum entropy regularization to improve uncertainty estimation ».
Computers in Biology and Medicine, vol. 196, nº Part A.
Mayet, Tsiry, Shamsolmoali, Pourya, Bernard, Simon, Granger, Eric, Hérault, Romain et Chatelain, Clément.
2025.
« TD-Paint: Faster diffusion inpainting through time-aware pixel conditioning ».
In 13th International Conference on Learning Representations, ICLR 2025 (Singapore, Apr. 24, 2025)
pp. 33086-33114.
International Conference on Learning Representations, ICLR.
Mbiazi, Dave, Bhange, Meghana, Babaei, Maryam, Sheth, Ivaxi, Kenfack, Patrik et Ebrahimi Kahou, Samira.
2025.
« Survey on AI ethics: A socio-technical perspective ».
Computational Intelligence, vol. 41, nº 6.
Mcconkey, Ryley, Balla, Julia, Hofgard, Elyssa, Nigam, Jigyasa et Smidt, Tess. 2025. « The role of local rotational symmetries and equivariance in data-driven fluid mechanics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Mcdonald, James, Ivan, Lucian, Sarr, Joachim et Sommers, Brendan. 2025. « Numerical reconstruction of distributed radioactive sources for decommissioning activities ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
McLaren, Sarah J., Elliot, Thomas, Dowdell, David, Wakelin, Steve, Kouchaki-Penchah, Hamed, Levasseur, Annie et Hoxha, Endrit.
2025.
« Policy implications of time-differentiated climate change analysis in life cycle assessment of building elements in Aotearoa New Zealand ».
International Journal of Life Cycle Assessment, vol. 30, nº 5.
pp. 811-833. Mcnally, Liam, Opperman, Taylor et Wang, Bingchen. 2025. « DNS study of turbulent flow through a concentric pipe formed by an outer square duct and an inner circular cylinder ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Mcsorley, Grant et Macewen, Khiym. 2025. « Prototyping and testing of the high-resolution optical payload for the SPUDNIK-1 CubeSat ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Mcsorley, Grant, Swaine, Spencer et Osuagwa, Chiagozi David. 2025. « Life cycle analysis and end-of-life strategies for wind turbines in Atlantic Canada ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mebarki, Manel, Ngale, Gabriella Joge et Lapointe, Mathieu.
2025.
« Fibrous super-bridging agents simultaneously improve contaminants removal and sludge dewatering via a very compact three-in-one process ».
npj Clean Water, vol. 8, nº 1.
Meddas, Hamza Sofiane, Zorgani, Muftah, Heidari, Majid, Javidani, Mousa, Levasseur, Tom et Jahazi, Mohammad.
2025.
« Crystallographic texture and precipitation control via double austenitization in high-performance tool steel ».
Materials and Design, vol. 257.
Meddas, Hamza Sofiane, Zorgani, Muftah, Jahazi, Mohammad, Javidani, Mousa et Levasseur, Tom. 2025. « Impact of orientation and stacking on knife distortion during quenching ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Medeiros, Heitor R., Latortue, David, Granger, Eric et Pedersoli, Marco.
2025.
« Mixed patch visible-infrared modality agnostic object detection ».
In IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) (Tucson, AZ, USA, Feb. 26-Mar. 06, 2025)
pp. 9023-9032.
Institute of Electrical and Electronics Engineers Inc..
Medeiros, Heitor Rapela, Aminbeidokhti, Masih, Peña, Fidel Alejandro Guerrero, Latortue, David, Granger, Eric et Pedersoli, Marco.
2025.
« Modality translation for object detection adaptation without forgetting prior knowledge ».
In Computer Vision – ECCV 2024 : 18th European Conference 2024, Proceedings, Part LXXXIX (Milan, Italy, Sept. 29-Oct. 04, 2024)
Coll. « Lecture notes in computer science », vol. 15147.
pp. 51-68.
Springer.
Meem, Tabassum Mushtary, Doukari, Omar et Iordanova, Ivanka.
2025.
« Comprehensive clash prevention in BIM coordination using a rule-based system ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 338-351.
Springer.
Meftah, Aida, Bouzabia, Hamda, Kaddoum, Georges, Talhi, Chamseddine et Assi, Chadi.
2025.
« Heterogeneous federated reinforcement learning-empowered dual jamming detection in terrestrial and non-terrestrial ISAC networks ».
In 21st International Conference on the Design of Reliable Communication Networks (DRCN) (Ningbo, China, May 12-15, 2025)
Institute of Electrical and Electronics Engineers Inc..
Meftah, Aida, Do, Tri Nhu, Kaddoum, Georges et Talhi, Chamseddine.
2025.
« Federated learning-enabled jamming detection for stochastic terrestrial and non-terrestrial networks ».
IEEE Transactions on Green Communications and Networking, vol. 9, nº 1.
pp. 271-290.
Mehdipoor, Amirhossein, Anane, Walid, Mehdipoorkaloorazi, Sahar et Iordanova, Ivanka.
2025.
« Integration of BIM and robotic fabrication for sustainable design and manufacturing of free-form building façade panels in off-site construction ».
Architecture, Structures and Construction, vol. 5, nº 1.
Mehdipoor, Amirhossein, Hajiagha, Arash Rohani, Mehdipoorkaloorazi, Sahar et Iordanova, Ivanka.
2025.
« A lean approach to productivity improvement in roof panel manufacturing for modular off-site construction using DfMA and emerging technologies ».
In Annual Conference of the International Group for Lean Construction, IGLC (Osaka, Japan, June 02-08, 2025)
Coll. « IGLC », vol. 33.
pp. 787-798.
International Group for Lean Construction.
Mehdipoor, Amirhossein, Iordanova, Ivanka et Al-Hussein, Mohamed.
2025.
« Enhancing the manufacturing process in light-gauge steel off-site construction using semiautomation ».
Journal of Construction Engineering and Management, vol. 151, nº 6.
Mehdipoor, Amirhossein, Iordanova, Ivanka et Al-Hussein, Mohamed.
2025.
« Off-site construction resilience: A strategic response to inflation challenges in construction in postpandemic Canada ».
Journal of Architectural Engineering, vol. 31, nº 1.
Mehnatkesh, Hossein, Gordon, David et Koch, Charles Robert.
2025.
« Temporal Kolmogorov-Arnold networks for control-oriented modeling of hydrogen/diesel dual-fuel engines ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Mehrabian, Amir et Kaddoum, Georges.
2025.
« Cooperative jamming detection using low-rank structure of received signal matrix ».
IEEE Transactions on Communications.
Mehrabian, Amir et Kaddoum, Georges.
2025.
« Enhancing resilience against jamming attacks: A cooperative anti-jamming method using direction estimation ».
IEEE Transactions on Communications.
Mehranfar, Nariman et Shakibaeinia, Ahmad. 2025. « ML-based solid boundary treatment for meshfree particle methods ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mehregan, Negar, Bozkurt, Berk, Granger, Eric, Hajikhani, Mohammadjavad et Shateri, MohammadHadi.
2025.
« MTLoc: A confidence-based source-free domain adaptation approach for indoor localization ».
IEEE Sensors Journal.
Mehrjoo, Majid et Assi, Rola.
2025.
« Probabilistic assessment of seismic acceleration demands of ductile light NSCs in moderately ductile RC frame buildings ».
Engineering Structures, vol. 335.
Mehrjoo, Majid et Assi, Rola.
2025.
« Proposed reliable peak component factors for ductile light NSCs subjected to horizontal ground motions ».
Bulletin of Earthquake Engineering, vol. 23, nº 2.
pp. 693-726.
Mejía-Moncayo, Camilo, Chaabane, Amin, Kenné, Jean-Pierre et Hof, Lucas A..
2025.
« Key performance indicators for sustainable remanufacturing: A literature review and methodological framework ».
Cleaner Logistics and Supply Chain, vol. 17.
Mejía-Moncayo, Camilo, Chaabane, Amin, Kenne, Jean-Pierre et Hof, Lucas A..
2025.
« Performance indicators for sustainable remanufacturing closed-loop supply chains ».
In
Accelerating the Socio-Ecological Transition: Strategies and Innovations for Sustainable Development.
pp. 175-197. Cham : Springer Nature Switzerland.
Melancon, Cédric, Saad, Maarouf, Kaur, Kuljeet et Gascon-Samson, Julien.
2025.
« Impact analysis of algorithm optimization on robot deep learning localization model for real-time execution ».
IEEE Access, vol. 13.
Melly, Stephen et Czekanski, Aleksander.
2025.
« Evaluating viscous potential function for rate sensitivity in soft materials ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Melly, Stephen et Czekanski, Aleksander.
2025.
« Parameter-based method for predicting strain rate sensitivity in soft materials ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Memme, Samuele, Fossa, Marco et Rousse, Daniel.
2025.
« Best tilt of PV system in Canada: Effect of the sky radiation model and climate conditions ».
Renewable Energy, vol. 254.
Ménard, Pierre André. 2025. « Modèles de langue et requis logiciels: Opportunités et défis ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 5-9 mai 2025). Ménard, Pierre André et Ratté, Sylvie. 2025. « Simulating person with aphasia speech with large language model adapters ». Affiche présentée lors de la conférence : Nordic Aphasia Conference (Uppsala, Sweden, June 09-11, 2025).
Menon, Luciana Trinkaus, Neduziak, Luiz Carlos Ribeiro, Barddal, Jean Paul, Koerich, Alessandro Lameiras et de Souza Britto, Alceu.
2025.
« Dynamic modality and view selection for emotion recognition: An experimental study on missing modality evaluation ».
In Pattern Recognition. ICPR 2024 International Workshops and Challenges, Proceedings, Part IV (Kolkata, India, Dec. 01, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15617.
pp. 151-166.
Springer.
Merabtine, Abdelatif.
2025.
« An integrated bond graph methodology for building performance simulation ».
Energies, vol. 18, nº 15.
Merle, Philippe et Petrillo, Fabio.
2025.
« Visualizing cloud-native applications with KubeDiagrams ».
In IEEE Working Conference on Software Visualization (VISSOFT) (Auckland, New Zealand, Sept. 07-08, 2025)
pp. 106-116.
Institute of Electrical and Electronics Engineers Inc..
Mertens, Joost, Klikovits, Stefan, Bordeleau, Francis, Denil, Joachim et Haugen, Oystein.
2025.
« Continuous evolution of digital twins using the DarTwin notation ».
Software and Systems Modeling, vol. 24, nº 5.
pp. 1405-1426.
Messaoud, Ines Belhaj et Thamsuwan, Ornwipa.
2025.
« Heart rate variability-based stress detection and fall risk monitoring during daily activities: A machine learning approach ».
Computers, vol. 14, nº 2.
Messikh, Hadil, Jahazi, Mohammad, Baiteche, Mounir et Morin, Jean-Benoit. 2025. « Numerical investigation of water quenching of large forged steel blocks: Effect of bath design on water agitation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Meynard-Duffour, Lola, Aubin, Carl-Éric, Arnoux, Pierre-Jean et Ilharreborde, Brice. 2025. « Value-based optimisation of adolescent scoliosis surgery planning combining predictive analytics and biomechanical modeling: Conceptual framework ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Miah, Irene, Koushanpour, Ashkan, Rackus, Darius et Valente, Virgilio. 2025. « Microfluidic microneedle platform for real-time transdermal muscle injury monitoring ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Michael, Judith, Cleophas, Loek, Zschaler, Steffen, Clark, Tony, Combemale, Benoit, Godfrey, Thomas, Khelladi, Djamel Eddine, Kulkarni, Vinay, Lehner, Daniel, Rumpe, Bernhard, Wimmer, Manuel, Wortmann, Andreas, Ali, Shaukat, Barn, Balbir, Barosan, Ion, Bencomo, Nelly, Bordeleau, Francis, Grossmann, Georg, Karsai, Gabor, Kopp, Oliver, Mitschang, Bernhard, Ariza, Paula Munoz, Pierantonio, Alfonso, Polack, Fiona A. C., Riebisch, Matthias, Schlingloff, Holger, Stumptner, Markus, Vallecillo, Antonio, van den Brand, Mark et Vangheluwe, Hans.
2025.
« Model-driven engineering for digital twins: Opportunities and challenges ».
Systems Engineering, vol. 28, nº 5.
pp. 659-670. Milliken, Evan et Altenhof, William. 2025. « Advancement of the clamping mechanism for a novel tensile energy dissipation device exploiting cutting deformation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Miloudi, Chaymae, Cheikhi, Laila, Idri, Ali et Abran, Alain.
2025.
« Assessing the impact of tuning parameter in instance selection based bug resolution classification ».
Information and Software Technology, vol. 188.
Minaker, Bruce et Ma, Tom Zhe.
2025.
« A multibody dynamics approach to the understeer budget ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Minani, Jean Baptiste, Fellah, Yahia El, Sabir, Fatima, Moha, Naouel, Gueheneuc, Yann-Gael, Kuradusenge, Martin et Masuda, Tomoaki.
2025.
« IoT systems testing: Taxonomy, empirical findings, and recommendations ».
Journal of Systems and Software, vol. 226.
Minani, Jean Baptiste, Sabir, Fatima, Moha, Naouel, Guéhéneuc, Yann-Gaël et Masuda, Tomoaki.
2025.
« TISSEA: A framework for testing IoT systems based on technical software engineering aspects ».
IEEE Internet of Things Journal, vol. 12, nº 22.
pp. 48787-48802.
Mine, S., Nkeck, J. E., Lafrenière-Greig, J., Gandubert, G., Murate, K. et Blanchard, F..
2025.
« Single-shot up-conversion terahertz spectrometer with high-frequency resolution ».
Optica, vol. 12, nº 2.
pp. 239-245.
Minoofar, Ghazal, Kandeloos, Amirhossein J., Koochaki, Mohammad S. et Momen, Gelareh.
2025.
« Progress in icephobic coatings for wind turbine protection: Merging chemical innovation with practical implementation ».
Crystals, vol. 15, nº 2.
Mioto, Vinicus et Petrillo, Fabio.
2025.
« A mapping of recording-based game test automation tools ».
In IEEE/ACM 9th International Workshop on Games and Software Engineering (GAS) (Ottawa, ON, Canada, Apr. 29, 2025)
Institute of Electrical and Electronics Engineers Inc..
Miroite, Pierre, Gardoni, Mickaël et Proulx, Geneviève-Anaïs.
2025.
« Towards a personalized knowledge graph thanks to gamification ».
In Product Lifecycle Management. Integrating Digital Technologies for Sustainability and Innovation: 21st IFIP WG 5.1 International Conference, PLM 2024, Revised Selected Papers, Part I (Bangkok, Thailand, July 07-10, 2024)
Coll. « IFIP Advances in Information and Communication Technology », vol. 740.
pp. 385-397.
Springer.
Miroite, Pierre, Proulx, Geneviève-Anaïs et Gardoni, Mickaël.
2025.
« Player profile as tool for communities of practice animation ».
In 25th International Conference on Engineering Design (ICED25) : "Design is a Team Sport" (Dallas, TX, USA, Aug. 11-14, 2025)
Coll. « Proceedings of the Design Society », vol. 5.
pp. 2601-2610.
Cambridge University Press. Mirzaei, Sajad, Jahazi, Mohammad et Morin, Jean-Benoit. 2025. « Machine learning-based optimization of tempering parameters in steel manufacturing using industrial electric furnaces ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mirzaei, Sajad, Morin, Jean-Benoit et Jahazi, Mohammad.
2025.
« Data-driven decision support for furnace loading in steel tempering: a machine learning approach based on industrial operations ».
Journal of Intelligent Manufacturing.
Mirzaei, Sajad, Tolouei, Ehsan, Morin, Jean-Benoit et Jahazi, Mohammad.
2025.
« Modelling and analysis of oxide growth kinetics and thermal effects during heat treatment of a MCLA steel: Comparing gas-fired and electric furnaces ».
Canadian Metallurgical Quarterly.
Mirzajanzadeh, Morad et Pasini, Damiano. 2025. « Reprogrammable hybrid curved-straight origami ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mishra, Sachit, Madariaga, Diego, Ziemlicki, Cezary, Naboulsi, Diala et Fiore, Marco.
2025.
« An urban geography of mobile application usage: Connecting demand dynamics and urban fabrics ».
In IEEE INFOCOM 2025 - IEEE Conference on Computer Communications (London, UK, May 19-22, 2025)
Institute of Electrical and Electronics Engineers Inc.. Misra, Sirshendu, Banerjee, Utsab et Mitra, Sushanta. 2025. « Liquid-liquid encapsulation: A paradigm towards robust, efficient, multifunctional wrapping ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Mitra, Surjyasish, Kim, A-Reum, Zhao, Boxin et Mitra, Sushanta. 2025. « Vertical rolling: how adhesion hysteresis enables spontaneous rolling of a soft sphere on a vertical soft wall ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Moazen, S., Gosselin, F. P., Tabiai, I. et Dubé, M..
2025.
« 3D printing LDPE/lunar regolith simulant composite: Manufacturing with in-situ resources on the moon ».
Acta Astronautica, vol. 237.
pp. 409-420. Mobarhan, Niloufar Fadaei, Hakkaki-Fard, Ali et Shahbakhti, Mahdi. 2025. « Optimization and reliability enhancement of solid oxide fuel cells through advanced numerical modeling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mobini, Majid, Kaddoum, Georges et Herceg, Marijan.
2025.
« A multi-carrier deep learning CSK communication system ».
IEEE Communications Letters, vol. 29, nº 6.
pp. 1191-1195. Moeini, Roya, Ratté, Sylvie, Ménard, Pierre André et Mottron, Laurent. 2025. « What language-related interests and behaviors do autistic children exhibit when using tablets? ». Communication lors de la conférence : Atypical Interaction Conference (Linkoping, Sweden, June 10-12, 2025).
Moeini, Roya, Ratté, Sylvie, Ménard, Pierre André, Yvon, Marc, Beaujard, Christel et Mottron, Laurent.
2025.
« Capturing preferences of non-verbal autistic children while watching cartoons on YouTube ».
In IEEE International Conference on Digital Health (ICDH) (Helsingor, Denmark, July 07-12, 2025)
pp. 217-219.
Institute of Electrical and Electronics Engineers Inc..
Moghadam, Saba Goharshenas, Momen, Gelareh et Jafari, Reza.
2025.
« Ice-responsive Coatings: Evaluating the effect of Hydrogen bond donors on Deep eutectic solvents/Ionic liquids Anti-icing efficiency ».
Journal of Molecular Liquids, vol. 427.
Moghadam, Saba Goharshenas, Momen, Gelareh et Jafari, Reza.
2025.
« Navigating ice-free Horizons: A Review on the Role of Ionic liquids and Deep eutectic solvents in Anti-icing Technologies ».
Journal of Ionic Liquids, vol. 5, nº 1.
Mohaje, Mohammad et Jiang, Liying. 2025. « Rayleigh-Lamb wave propagation in a finitely deformed viscoelastic dielectric elastomer (DE) layer ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Mohamadi, P., Theurot, D., Hallé, S. et Vinches, L.. 2025. « Sex-based variations in body pressure mapping for sleeping bag applications ». Affiche présentée lors de la conférence : Institute of Textile Science (Montréal, QC, Canada, Mar. 18-19, 2025).
Mohamadi, Parian, Theurot, Dimitri, Hallé, Stéphane et Vinches, Ludwig.
2025.
« Sex-specific variations in body pressure distribution across different sleep surfaces and positions ».
Ergonomics.
Mohamed, Zina, Aissa, Sonia et Kouki, Ammar B..
2025.
« Null-space based design with learning for RIS-aided wireless information and power transfer ».
IEEE Transactions on Vehicular Technology.
Mohammadi, Amir, Altenhof, Michael et Jianu, Ofelia. 2025. « Derivative-free optimization of a double-pipe heat exchanger for enhanced copper-chlorine cycle efficiency ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Mohammadi, Kyarash, Bhojani, Naeem et Di Labbio, Giuseppe. 2025. « Development of a bladder flow simulator for visualizing ureteral jet dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Mohammadi, Mohsen. 2025. « Metal additive manufacturing for the marine industry: Opportunities, challenges, and outlook ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Mohammadtaheri, Hossein, Sedaghati, Ramin et Molavi-Zarandi, Marjan. 2025. « A comprehensive analysis of residual stress formation in the selective laser melting process through numerical simulation and experimental validation for Inconel-625 ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mohan, Nirupama et Chaudhari, Gajanan.
2025.
« Corrosion performance of boronized martensitic stainless steels ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
https://doi.org/10.82417/vpe6-7h89 :
Moissenet, Florent, Bousigues, Sandrine, Boudabbous, Sana, Cabral, Davide, Gajny, Laurent, Hagemeister, Nicola et Holzer, Nicolas.
2025.
« Predicted impingement-free motion amplitudes in reverse total shoulder arthroplasty differs between supine computed tomography and standing biplanar x-ray imaging: a pilot study ».
JSES Reviews, Reports, and Techniques.
Mojahed, Sundos, Drouin, Réjean et Sboui, Lokman.
2025.
« ODACE-RMS: A remote web-based platform for automated multi-device android testing and certification ».
IEEE Access, vol. 13.
pp. 99863-99878.
Mokué, Pascale Alison Mekazi, Tahan, Antoine et Hof, Lucas.
2025.
« A new perspective on measuring manufacturing modularity ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Molana, Niki, Rezavand, Araz, Maciel, Yvan et Houde, Sébastien. 2025. « Time-resolved PIV measurement at the exit of a Francis turbine runner during a homologous start-up sequence ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Moncayo, Camilo Mejia, Kenné, Jean-Pierre et Hof, Lucas A.. 2025. « A smart and sustainable closed-loop supply chain scheduling model for remanufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mongeau, Richard, Poirier, Erik Andrew et St-Jacques, Michèle.
2025.
« Monitoring the reduction of SIUHI Areas by thermographic measurements on green and gray infrastructure assets generated through a project’s CIM information ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 686-701.
Springer. Mongrain, Alexandre, Pelletier, Simon, Guilbault, Raynald et Lalonde, Sébastien. 2025. « Finite element modeling of high-voltage cable conductor structures under alternating bending loads ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Monika, Monika, Nosrati, Farzam, George, Agnes, Sciara, Stefania, Fazili, Riza, Marques Muniz, André Luiz, Bisianov, Arstan, Lo Franco, Rosario, Munro, William J., Chemnitz, Mario, Peschel, Ulf et Morandotti, Roberto.
2025.
« Quantum state processing through controllable synthetic temporal photonic lattices ».
Nature Photonics, vol. 19, nº 1.
pp. 95-100.
Monk, James, Gordon, William, Tutunea-Fatan, O. Remus et Bordatchev, Evgueni.
2025.
« Drag reduction performance of triangular riblets with various included angles immersed in water-glycerol mixture ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Monsarrat-Chanon, Hami, Voix, Jérémie, Bouserhal, Rachel, Cardinal, Patrick et Chabot, Philippe (inventeurs) 29 juillet 2025. « In-ear nonverbal audio events classification system and method ». École de technologie supérieure (titulaire(s)). Brevet canadien CA 3079917. [Titre traduit: Système de classification d'évènements audio non verbaux intra-auriculaires et procédé associé]. Monsarrat-Chanon, Hami, Voix, Jérémie, Nadon, Vincent et Habrant, Thomas (inventeurs) 29 octobre 2025. « System, device and method for assessing a fit quality of an earpiece ». École de technologie supérieure (titulaire(s)). Brevet européen EP 3 646 615.
Montandon, João Eduardo, Silva, Luciana Lourdes, Politowski, Cristiano, Prates, Daniel, Bonifácio, Arthur de Brito et El Boussaidi, Ghizlane.
2025.
« Unboxing default argument breaking changes in 1 + 2 data science libraries ».
Journal of Systems and Software, vol. 229.
Montaut, Nicola, George, Agnes, Monika, Monika, Nosrati, Farzam, Yu, Hao, Sciara, Stefania, Crockett, Benjamin, Peschel, Ulf, Wang, Zhiming, Lo Franco, Rosario, Chemnitz, Mario, Munro, William J., Moss, David J., Azaña, José et Morandotti, Roberto.
2025.
« Progress in integrated and fiber optics for time-bin based quantum information processing ».
Advanced Optical Technologies, vol. 14.
Montaut, Nicola, Sciara, Stefania, Chemnitz, Mario, Monika, Monika, Peschel, Ulf, Moss, David, Nosrati, Farzam, Wang, Zhiming, Azaña, José, Yu, Hao, lo Franco, Rosario et Morandotti, Roberto.
2025.
« Integrated high-dimensional time-bin entanglement analyzers for scalable quantum photonics ».
In IEEE Photonics Society Summer Topicals Meeting Series (SUM) (Berlin, Germany, July 21-23, 2025)
Institute of Electrical and Electronics Engineers Inc..
Montazeri, Maryam et Abo El Ezz, Ahmad.
2025.
« Development of an inventory modelling framework for seismic risk assessment of residential buildings in eastern Canada ».
Earthquake Engineering and Resilience, vol. 4, nº 3.
pp. 354-367.
Montazeri, Sadaf, Iordanova, Ivanka et Rankohi, Sara.
2025.
« Design for Manufacturing and Assembly (DfMA) in Off-Site Construction (OSC) and On-Site Construction ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023, Volume 4 : Construction Track (Moncton, NB, Canada, May 24-27, 2023)
Coll. « Lecture notes in civil engineering », vol. 498.
pp. 385-398.
Springer.
Montazeri, Sadaf, Mehdipoor, Amirhossein, Rankohi, Sara et Iordanova, Ivanka.
2025.
« Identifying challenges for extended design for manufacturing and assembly (DfMA) in all phases of a construction project ».
Architecture, Structures and Construction, vol. 5, nº 1.
Montcho, Mario, Bouvette, Véronique, Wagnac, Éric, Petit, Yvan et Beaumont, Louis De. 2025. « Relationship between brain morphology and head dimensions in varsity Canadian football players ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Monteiro, Amanda, Filho, A. V. M. L., Dantas, N. K. L., Castro, Jose, Arcanjo, Ayrlw Maynyson C., Rosas, Pedro A. C., Rodrigues, Perolla, Venerando, Augusto C., Spader, Newmar, Mohamed, Mohamed A., Ilinca, Adrian et Marinho, Manoel H. N..
2025.
« Integrating battery energy storage systems for sustainable EV charging infrastructure ».
World Electric Vehicle Journal, vol. 16, nº 3.
Montoya-Torres, Jairo. 2025. « Simulation-optimization for sustainable supply chain design subject to disruptions ». Communication lors de la conférence : 28th International Conference on Production Research (ICPR 2025) (Bogota, Colombia, July 13-17, 2025).
Montuwy, Angélique et Dommes, Aurélie.
23 avril 2025.
« Wearables to help grandparents find their way in the city ».
Frontiers for Young Minds.
Moosavian, Hashem et Tang, Tian. 2025. « A multi-scale mechanics model for disordered biopolymer gels incorporating intrinsic incompressibility ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Moosavi-Khoonsari, Elmira, Azzaz, Riadh, Hurel, Valentin, Jahazi, Mohammad et Ebrahimi Kahou, Samira.
2025.
« Controlling minor element phosphorus in green electric steelmaking using neural networks ».
In REWAS 2025 : Circular Economy for the Energy Transition (Las Vegas , NV, USA, Mar. 23-27, 2025)
Coll. « Minerals, Metals & Materials Series »
pp. 297-305.
Springer.
Moosavi-Khoonsari, Elmira, Dogan, Neslihan, Schrama, Frank N. H., Guerra, Fernando B. et Gu, Kezhuan.
2025.
« Desulfurization challenges in the transition to green steel production ».
In AISTech - Iron and Steel Technology Conference Proceedings (Nashville, TN, USA, May 05-08, 2025)
pp. 859-868.
Association for Iron and Steel Technology.
Mora, Angel et Czekanski, Aleksander.
2025.
« Effect of carbon nanotube agglomeration on the piezoresistive response of polymer nanocomposite architected materials ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Mora, P. E., Sepulveda, J. P. et Montoya-Torres, J. R.. 2025. « Maturity model for supply chain security risk management ». Communication lors de la conférence : 28th International Conference on Production Research (ICPR 2025) (Bogota, Colombia, July 13-17, 2025).
Moradi, Mehrdad et Ilinca, Adrian.
2025.
« Analyzing wave dragon under different wave heights using flow-3D: A computational fluid dynamics approach ».
Water, vol. 17, nº 5.
Morand, Paul, Amar, Luc et Guilbault, Raynald. 2025. « Contact modeling of conformal surfaces subjected to microslips in spline applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Morawo, Isreal et Grecov, Dana.
2025.
« Microstructural evolution of chiral nematics: A lid-driven cavity flow study ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Morelli, Laura, Sirtoli, Vinicius, Gagnon, Ghyslain et Zednik, Ricardo J..
2025.
« Analytical modeling and experimental validation of triboelectric behavior in Kirigami flexible capacitive sensors ».
IEEE Transactions on Instrumentation and Measurement, vol. 74.
Moreno, Jorge Palacios et Mertiny, Pierre.
2025.
« Mechanical performance of unidirectional glass fiber-reinforced thermoplastic composites under varying aging conditions ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Moretti, Jean-Baptiste, Korban, Alexandre, Alchourron, Emilie, Gervais, Sylvie et El Jalbout, Ramy.
2025.
« Carotid artery intima-media thickness values in obese or overweight children: a meta-analysis ».
European Radiology, vol. 35, nº 6.
pp. 3305-3313.
Morin Pépin, Stéphane et Francis, Adel.
2025.
« Planning the evolution of the sectors of a construction project over time with the dynamic location breakdown structure ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (MontreaL, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 805-811.
Springer. Morin, William Morin, Mcdonald, James G. et Radulescu, Matei I.. 2025. « Triple-shock reflections using a new reactive 10-moment model ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Morrissey, Karla G., Henderson, Andrew D., Zimmerman, John et Thoma, Greg.
2025.
« Spatially explicit freshwater eutrophication potential (EP) from water resource recovery facility (WRRF) discharge and mitigation opportunities in the U.S ».
Journal of Cleaner Production, vol. 509.
Morsli, Reda, Kara, Nadjia, Ould-Slimane, Hakima et Lahlou, Laaziz.
2025.
« Multidimensional intrusion detection system for containerized environments ».
In IEEE 11th International Conference on Network Softwarization (NetSoft) (Budapest, Hungary, June 23-27, 2025)
pp. 546-554.
Institute of Electrical and Electronics Engineers Inc..
Mortazavinejad, Seyyed Mohsen, Alakhdar, Mostafa, Vinches, Ludwig et Hallé, Stéphane.
2025.
« A novel methodology for calculating thermal conductivity of natural hollow fibers with validation in nonwoven fabric structures ».
International Communications in Heat and Mass Transfer, vol. 167, nº Part A.
Mortazavinejad, Seyyed Mohsen, Vinches, Ludwig et Hallé, Stéphane. 2025. « Exploring thermal resistance of nonwoven fabric structures in cold-protective clothing using computational fluid dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Mosaddegh-Hesar, Hamidreza, Khoshhava, Mojtaba Ayaz, Caron, Simon et Al-Haddad, Kamal.
2025.
« A novel accurate filterless initial rotor position estimation algorithm for salient pole permanent magnet synchronous machines ».
In IEEE 34th International Symposium on Industrial Electronics (ISIE) (Toronto, ON, Canada, June 20-23, 2025)
Institute of Electrical and Electronics Engineers Inc..
Moshrefi, Amirhossein, Ali, Abid, Gratuze, Mathieu et Nabki, Frederic.
2025.
« Design and fabrication of multi-frequency and low-quality-factor capacitive micromachined ultrasonic transducers ».
Micromachines, vol. 16, nº 7.
Moshrefi, Amirhossein et Nabki, Frederic.
2025.
« A unified AI approach for modeling the properties of MEMS ultrasonic transducers ».
In IEEE International Ultrasonics Symposium (IUS) (Utrecht, Netherlands, Sept. 15-18, 2025)
IEEE Computer Society.
Moshrefi, Amirhossein et Nabki, Frederic.
2025.
« Advanced transformer-based framework for breast cancer detection in ultrasound imaging ».
In IEEE International Ultrasonics Symposium (IUS) (Utrecht, Netherlands, Sept. 15-18, 2025)
IEEE Computer Society.
Motamedi, Sina, Rousse, Daniel R. et Promis, Geoffrey.
2025.
« A review of mycelium bio-composites as energy-efficient sustainable building materials ».
Energies, vol. 18, nº 16.
Motamedi, Sina, Rousse, Daniel R. et Promis, Geoffrey.
2025.
« Microstructure-driven hygrothermal behavior of mycelium-based composites for bio-based insulation ».
Energies, vol. 18, nº 11.
Moulla, Donatien Koulla, Attipoe, David, Akinyemi, Lateef Adesola, Thottempudi, Sree Ganesh, Agbo-Ajala, Jelil Olatunbosun, Mnkandla, Ernest et Abran, Alain.
2025.
« Machine learning algorithms for energy consumption prediction in smart homes: A comparative study ».
In 7th International Conference on Wireless, Intelligent and Distributed Environment for Communication, WIDECOM 2024 (Keene, NH, USA, Oct. 16-18, 2024)
Coll. « Lecture Notes on Data Engineering and Communications Technologies », vol. 237.
pp. 75-94.
Springer.
Mouret, Thibault, Leclercq, Aurore et Brailovski, Vladimir.
2025.
« The LPBF printability and as-printed mechanical properties of a Ti6246 alloy as a function of printing parameters and microstructure ».
Materials Science and Engineering: A, vol. 946.
Moyeen, M. A., Kaur, Kuljeet, Agarwal, Anjali, Manzano, Ricardo, Zaman, Marzia et Goel, Nishith.
2025.
« SignDefence: Byzantine-robust federated learning with sign direction and leaky ReLU ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 6353-6358.
Institute of Electrical and Electronics Engineers Inc..
Moyeen, M. A., Kaur, Kuljeet, Agarwal, Anjali, Manzano, S. Ricardo, Zaman, Marzia et Goel, Nishith.
2025.
« Fed-Reputed: Reputation-aware client selection in hierarchical federated learning for consumer electronics ».
IEEE Transactions on Consumer Electronics.
Moyeen, M. A., Kaur, Kuljeet, Agarwal, Anjali, Manzano, S. Ricardo, Zaman, Marzia et Goel, Nishith.
2025.
« Fedchallenger: A robust challenge-response and aggregation strategy to defend poisoning attacks in federated learning ».
IEEE Access, vol. 13.
pp. 153866-153885.
Mozafary, Seyedeh Mahya, Fung, Alan S., Leong, Wey H. et Kerme, Esa Dube.
2025.
« Performance comparison of single and double U-tube borehole heat exchangers in ground source heat pump systems ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Mtar, Aymen, Tabiai, Ilyass et Boton, Conrad. 2025. « 4D printing of photoreactive shape memory polymer for smart building applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Muhammed, Manaf, Harvey, Derek, Khawaja, Hassan Abbas, Virk, Muhammad Shakeel et Momen, Gelareh.
2025.
« In-cloud ice accretion and performance degradation of UAV propellers in forward flight: An experimental study ».
Cold Regions Science and Technology, vol. 239.
Muhammed, Musa, Javidani, Mousa, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad.
2025.
« Effect of substrate roughness on the tribological performance of AlTiN/AlTiCrN-Coated A8 Tool Steel ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
Muhammed, Musa, Javidani, Mousa, Sadrabadi, Tahere Ebrahimi, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad.
2025.
« A comparative wear analysis of tool steels: An evaluation based on ASTM G65 and G195 testing methods ».
Journal of Materials Engineering and Performance.
Muhammed, Musa, Javidani, Mousa, Sadrabadi, Tahere Ebrahimi, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad.
2025.
« Effect of layered architectural design on the tribological behaviour of AlTiN/AlTiCrN-based cathodic arc evaporated physical vapour deposition coatings ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
Mukherjee, Arnab, Mishra, Sharmistha, Murty, Kumar et Chaudhuri, Swetaprovo. 2025. « Analysing the distribution of SARS-CoV-2 infections in schools and shelters: Integrating model predictions with real-world observations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Muller, Antoine, Boulaire, Baptiste, Chaumeil, Anaïs, Hagemeister, Nicola, Dumas, Raphaël et Robert, Thomas.
2025.
« Comparison of marker-based and markerless motion analysis: robustness to camera reduction ».
[Article de conférence]. Multidisciplinary Biomechanics Journal, vol. 1.
pp. 95-97.
Mullins, Mathieu, Kamil, Hamza, Fahsi, Adil et Soulaïmani, Azzeddine.
2025.
« Physics-informed neural networks for solving moving interface flow problems using the level set approach ».
Physics of Fluids, vol. 37, nº 10.
Mumtaz, Zarqoon, Farzam, Reza, Guan, Mang, Steiche, Patrick, Kirchen, Patrick et Mctaggart-Cowan, Gordon.
2025.
« Impact of hydrogen-diesel dual fuel combustion on the performance of aftertreatment system in heavy duty commercial truck ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Muñoz, D., Montoya-Torres, J. R. et Jimenez, J. F.. 2025. « An aggregate planning approach for Boyacá’s Potato Supply Chain ». Communication lors de la conférence : 28th International Conference on Production Research (ICPR 2025) (Bogota, Colombia, July 13-17, 2025).
Murtaza, Shakeeb, Belharbi, Soufiane, Pedersoli, Marco et Granger, Eric.
2025.
« A realistic protocol for evaluation of weakly supervised object localization ».
In IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) (Tucson, AZ, USA, Feb. 25-Mar. 06, 2025)
pp. 5367-5376.
Institute of Electrical and Electronics Engineers Inc..
Murugesan, Balamurali, Adiga Vasudeva, Sukesh, Liu, Bingyuan, Lombaert, Herve, Ben Ayed, Ismail et Dolz, Jose.
2025.
« Neighbor-aware calibration of segmentation networks with penalty-based constraints ».
Medical Image Analysis, vol. 101.
Murugesan, Balamurali, Silva-Rodríguez, Julio, ben Ayed, Ismail et Dolz, Jose.
2025.
« Robust calibration of large vision-language adapters ».
In Computer Vision – ECCV 2024 : 18th European Conference, 2024, Proceedings, Part XXI (Milan, Italy, Sept. 29-Oct. 04, 2024)
Coll. « Lecture notes in computer science », vol. 15082.
pp. 147-165.
Springer.
Nabavi, Seyedfakhreddin, Ménard, Michaël et Nabki, Frederic.
2025.
« Electrostatic MEMS phase shifter for SiN photonic integrated circuits ».
Journal of Sensor and Actuator Networks, vol. 14, nº 5.
Nadeau, Sylvie. 2025. « Expérimentations en HF/E pour la réalité augmentée ou mixte : comment définir la complexité d’assemblage/désassemblage ». Communication lors de la conférence : Congrès annuel AQHSST (Drummondville, QC, Canada, 21-22 mai 2025).
Nafchi, Amin Ghasemi et Cheriet, Mohamed.
2025.
« BA-GAN: A boundary-aware generative adversarial network for document restoration ».
In Intelligent Systems and Pattern Recognition : 4th International Conference, ISPR 2024, Revised Selected Papers, Part II (Istanbul, Turkey, June 26-28, 2024)
Coll. « Communications in Computer and Information Science », vol. 2304.
pp. 344-358.
Springer. Naik, Sameeksha, Nagpal, Aaryan et Azhari, Fae. 2025. « A people-first gait analysis device: Bringing sensor-based gait assessment into everyday care ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Nair, Devika Padmakumar et Ménard, Michaël.
2025.
« A compact and broadband splitter to interface between strip and slot waveguides ».
IEEE Photonics Journal, vol. 17, nº 1.
Najafian, Mohammad R. et Vermeire, Brian C.. 2025. « Strong stability preserving Runge-Kutta projection methods ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Najarzadeh, Zahra, Xu, Yinghao, Heuzey, Marie-Claude et Ajji, Abdellah. 2025. « On some application of rheology: Packaging sealing and swelling in gels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Nakmouche, Mohammed Farouk, Deslandes, Dominic, Nedil, Mourad et Gagnon, Ghyslain.
2025.
« Low-cost foldable printed RGW wideband MIMO antenna with additively manufactured dielectric resonator ».
IEEE Transactions on Components, Packaging and Manufacturing Technology.
Nakmouche, Mohammed Farouk, Deslandes, Dominic, Nedil, Mourad et Gagnon, Ghyslain.
2025.
« Machine learning-aided design of defected ground structures for PRGW-based MIMO antennas ».
IEEE Transactions on Antennas and Propagation.
Namvar, Morteza, Ivan, Lucian et Mcdonald, James G.. 2025. « Augmented reality-based radiation visualization for nuclear-facility decommissioning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Nantenaina, Tina Nomena Herimino, Titov, Andrey, Yuh, Sung-Joo et Drouin, Simon.
2025.
« Evaluating virtual reality as a tool for improving surgical planning in spinal tumors ».
International Journal of Computer Assisted Radiology and Surgery.
Narayana, Sidharth Sarojini et Bodkhe, Sampada. 2025. « A numerical simulation approach for continuous wire encapsulation additive manufacturing of polymer and shape memory alloy ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Narouwa, Massamaesso, Mendiboure, Leo, Maaloul, Sassi, Dia, Ndeye Birame, Badis, Hakim, Molla, Dereje M., Berbineau, Marion et Langar, Rami.
2025.
« Mobility in 5G emulators: Implementation and evaluation ».
In 28th International Symposium on Real-Time Distributed Computing (ISORC) (Toulouse, France, May 26-28, 2025)
pp. 144-152.
Institute of Electrical and Electronics Engineers Inc..
Nasr, Mohamed Chiheb, de Araujo-Filho, Paulo Freitas, Kaddoum, Georges et Mourad, Azzam.
2025.
« A bayesian neural network for robust automatic modulation classification: Mitigating adversarial amplification ».
IEEE Internet of Things Journal, vol. 12, nº 17.
pp. 35195-35206.
Nassar, Mohamad et Abo El Ezz, Ahmad.
2025.
« Fragility-based seismic risk assessment of reinforced concrete bridge columns ».
Infrastructures, vol. 10, nº 5.
Natale, Giovanniantonio. 2025. « Micromechanical characterization of complex interfaces ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Nath, Adwaith, Peng, Heather et Qiu, Wei.
2025.
« Numerical analysis and validation of turning circle and zig-zag maneuvers of KRISO container ship in calm sea using body force method ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Nav, Foad Mohajeri, Mirfakhar, Seyedeh Fatemeh et Snaiki, Reda.
2025.
« A hybrid machine learning framework for wind pressure prediction on buildings with constrained sensor networks ».
Computer-Aided Civil and Infrastructure Engineering.
Nav, Foad Mohajeri et Snaiki, Reda.
2025.
« A novel hybrid machine learning model for rapid prediction of urban wind flow ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2024, Volume 14: Structural Engineering (Niagara Falls, ON, Canada, June 05-07, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 731.
pp. 15-23.
Springer.
Nav, Foad Mohajeri et Snaiki, Reda.
2025.
« Time-domain buffeting response prediction of a long-span bridge: A hybrid machine learning framework ».
Structures, vol. 73.
Nawaz, Wajahat, Albert, Kevin, Jouvet, Philippe et Noumeir, Rita.
2025.
« Acute respiratory distress identification via multi-modality using deep learning ».
Applied Sciences, vol. 15, nº 3.
Nazmabadi, Reyhaneh et Hakkaki-Fard, Ali. 2025. « Managing greenhouse humidity with ground air heat exchange systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Ndikumana, Anselme, Nguyen, Kim Khoa et Cheriet, Mohamed.
2025.
« Digital twin backed closed-loops for energy-aware and open RAN-based fixed wireless access serving rural areas ».
IEEE Transactions on Mobile Computing, vol. 24, nº 3.
pp. 1669-1683.
Negahban, Mir Hossein, Hallonet, Alexandre, Woumeni, Marie Noupoussi, Nguyen, Constance et Botez, Ruxandra Mihaela.
2025.
« Structural and topological optimization of a novel elephant trunk mechanism for morphing wing applications ».
Aerospace, vol. 12, nº 5.
Negahban, Mir Hossein, Saci, Tarek et Botez, Ruxandra Mihaela.
2025.
« Development and experimental study of a seamless morphing trailing edge flap equipped with an elephant trunk actuation mechanism ».
Applied Sciences, vol. 15, nº 10.
Negrete, Mario, Muñoz, Mirna, Galván-Cruz, Sergio et Laporte, Claude Y..
2025.
« Strengthening an agile software development environment using ISO/IEC 29110 as a reference standard ».
In
New challenges in software engineering.
Coll. « Studies in computational intelligence », 1, vol. 1209.
pp. 223-235. Springer.
Negrini, A., Gauvin, C., Berbiche, D., Terroir, J., Perrin, N., Jolly, C., Martin, L., Sgard, F. et Doutres, O..
2025.
« Development and validation of the North American COmfort of hearing PROtection Device questionnaire (COPROD-NAQ) ».
Safety Science, vol. 181.
Neid, Alton, Fristot, Pierre et Dumas, Guy.
2025.
« A simplified oscillating-foil turbine concept with an elliptical foil in pure heave ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Nejad, Elias Erwann Zohreh, Rampon, Ilies, Ghazi, Georges et Botez, Ruxandra Mihaela.
2025.
« Modeling of the six-degree-of-freedom nonlinear ground dynamics of the Cessna Citation X ».
Journal of Aircraft, vol. 62, nº 4.
Nejati, Ashkan, Taj, Zia Ud Din, Etemadi, Majed, Balachandar, Ram et Barron, Ronald. 2025. « A numerical analysis of heat transfer and hydrodynamic performance in electric motors using tangential jets ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Nekoui, Javad, Saadabad, Neda Zahedi, Wang, Qingsong et Chandra, Ambrish.
2025.
« Cascaded connection of sub-multilevel inverters based on switched capacitors ».
In IEEE International Symposium on Industrial Electronics (Toronto, ON, Canada, June 20-23, 2025)
Institute of Electrical and Electronics Engineers Inc..
Nemitallah, Medhat et El-Adawy, Mohammed.
2025.
« Characteristics of combustion and NOx emissions of ammonia/methane flames in a premixed swirl gas turbine combustor ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Newton, Jeremy D., Hossain, Samantha, Song, Yuetong, Pavelick, Jacqueline, Abedi, Kimia, Santos, Claudia Dos, Wong, Amy P. et Young, Edmond W. K.. 2025. « Mechanical modelling of pulmonary hypertension using a protein-based cell stretching platform ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Nezami Balouchi, Kambiz, Mercier, Julien et Lopez-Herrejon, Roberto E..
2025.
« An exploratory empirical eye-tracker study of visualization techniques for coverage of combinatorial interaction testing in software product lines ».
Journal of Systems and Software, vol. 220.
Ngô, Valérie Tuyêt Mai et Nadeau, Sylvie. 2025. « La complexité de tâche en préparation de commandes, état des lieux ». Communication lors de la conférence : Congrès annuel de l’Association Canadienne d’Ergonomie (Québec, QC, Canada, 06-09 oct. 2025).
Nguyen, Daniela, Beauséjour, Marie-Hélène, Solorzano Barrera, Carolina, Qiao, Ningxin, Villemure, Isabelle et Aubin, Carl-Éric.
2025.
« Finite element modeling of pedicle screw fixation considering patient-specific bone density ».
Computer Methods in Biomechanics and Biomedical Engineering.
Nguyen, Joris, Bouillass, Ghada, Saidani, Michael, Yannou, Bernard, Graff, Pascal et Ouisse, Hervé.
2025.
« Applying the building blocks framework for circular economy progress in heavy-duty vehicle manufacturing ».
In Renewable Energy Towards Decarbonization: Proceedings of the ICEER 2024 The 11th International Conference on Energy and Environment Research (Coimbra, Portugal, July 24-26, 2024)
Coll. « Environmental Science and Engineering »
pp. 231-246.
Springer.
Nguyen, Thanh L., Kaddoum, Georges, Selim, Bassant et Assi, Chadi.
2025.
« Beyond diagonal RIS for ISAC network: Statistical analysis and network parameter estimation ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 2406-2411.
Institute of Electrical and Electronics Engineers Inc..
Nguyen, Ti Ti, Ha, Vu Nguyen, Le, Than-Dung, Tran, Duc-Dung, Chatzinotas, Symeon et Nguyen, Kim Khoa.
2025.
« Reliable intelligent reflecting surface-assisted mobile edge computing systems: A physical layer security and encryption design ».
IEEE Transactions on Mobile Computing.
Nguyen, Van Huynh et Nguyen, Kim Khoa.
2025.
« Double-layered anti-interception strategy for ground combat vehicles ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 1845-1850.
Institute of Electrical and Electronics Engineers Inc.. Niasar, Erfan Hamsayeh Abbasi, Li, Haining, Liu, Kefu, Xu, Jason et Li, Leping. 2025. « Effect of shaft penetration factor and interference fit on torsional stiffness of a coupling hub-shaft assembly ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Niasar, Erfan Hamsayeh Abbasi, Seitz, Andreas Martin et Li, Leping. 2025. « Region-dependent material properties of human knee cartilages and menisci determined with indentation maps and machine-learning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Nickley, William A., Proulx, Sébastien, Sanders, Elizabeth B. N., McInroy, Lauren et Melsop, Susan.
2025.
« Making for one another: Design-based making and positive youth development ».
International Journal of Design, vol. 19, nº 1.
pp. 21-44. Nicolle, Jonathan, Richard, Pierre-Luc et Dubois, Guillaume. 2025. « Study of hydraulic runner cracks due to side chamber non-uniformity ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Nicolle, Léo, Lalonde, Sébastien et Guilbault, Raynald. 2025. « Design of an adjustable-span test bench for studying fatigue of high-voltage clamp-conductor assemblies ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Nikbakht, R., Saadati, M., Kim, H. S., Jahazi, M. et Chromik, R. R..
2025.
« Multi-scale analysis of microstructural evolution and atomic bonding mechanisms in CoCrFeMnNi high-entropy alloys upon cold spray impact ».
Journal of Materials Science and Technology, vol. 208.
pp. 263-277.
Nikkhoo, Amirfarhang, Mousavi, Seyed Pedram, Kolarikola, Hossein Hassanzadeh, Larachi, Faïçal, Pouliot, Roxane, Berthod, François, Rouabhia, Mahmoud, Ohl, Claus-Dieter, Witzel, Bernd et Taghavi, Seyed Mohammad.
2025.
« Laser-induced high-speed jets in needle-free injection systems: Mechanisms, applications, and innovations ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Niknejad, Ehsan, Jafari, Reza et Momen, Gelareh.
2025.
« Electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(vinyl alcohol) nanofibers prepared via a DMSO–water co-solvent and freeze–thaw crosslinking ».
Journal of Materials Science, vol. 60, nº 48.
pp. 25779-25796.
Nili, Maryam, Jabalameli, Mohammad Saeed, Jabbarzadeh, Armin et Dehghani, Ehsan.
2025.
« An optimization approach for sustainable and resilient closed-loop floating solar photovoltaic supply chain network design ».
Computers and Chemical Engineering, vol. 193.
Ninevski, Dimitar, O'Leary, Paul, Terbuch, Anika et Harker, Matthew.
2025.
« Optimal node placement for constrained polynomial interpolation ».
In 14th Mediterranean Conference on Embedded Computing (MECO) (Budva, Montenegro, June 10-14, 2025)
Institute of Electrical and Electronics Engineers Inc..
Niquet, Gabriel, Lemieux, Patrick et Seers, Patrice.
2025.
« A novel approach for exhaust gas recirculation stratification in a spark-ignition engine ».
Applied Thermal Engineering, vol. 266.
Njah, Yosra, Leivadeas, Aris et Falkner, Matthias.
2025.
« An AI-driven intent-based network architecture ».
IEEE Communications Magazine, vol. 63, nº 4.
pp. 146-153.
Nobert, Gabriel, Constantin, Nicolas G. et Blaquière, Yves.
2025.
« GHz-range modeling of power integrity in an array of simultaneously switching power converters ».
IEEE Transactions on Electromagnetic Compatibility, vol. 67, nº 1.
pp. 316-327. Noghani, Kiavash Askari et Al Haddad, Kamal (inventeurs) 2 septembre 2025. « Multilevel power converter ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,407,271.
Noor, Mashama, Palmer, Patrick R. et Mctaggart-Cowan, Gordon.
2025.
« A comparative analysis of PHEV and BEV on fuel economy, greenhouse gas emissions, and annual cost ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Noori, Mehrdad, Bahri, Ali, Hakim, Gustavo A. V., Ben Ayed, Ismail, Cheraghalikhani, Milad, Osowiechi, David, Desrosiers, Christian et Yazdanpanah, Moslem.
2025.
« FDS: Feedback-guided domain synthesis with multi-source conditional diffusion models for domain generalization ».
In IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) (Tucson, AZ, USA, Feb. 25-Mar. 06, 2025)
pp. 8504-8514.
Institute of Electrical and Electronics Engineers Inc..
Northon, Stephane, Boivin, Karine, Laurencelle, Louis et Hagemeister, Nicola.
2025.
« Quantifying frontal plane knee thrust in patients with medial knee osteoarthritis using weight transfer and balance tasks ».
Gait and Posture, vol. 119.
pp. 56-62.
Nouali, Mohammed, Dony, Anne, Vignaud, Stéphanie et Carter, Alan.
2025.
« Effect of aging kinetics on the fatigue behavior of asphalt mixtures incorporating various RAP contents ».
Transportation Engineering, vol. 19.
Noura, Sajjad, Graziani, Andrea et Carter, Alan.
2025.
« An integrated packing-moisture control approach in bitumen-stabilized materials (BSM) design ».
Construction and Building Materials, vol. 492.
Nourbakhsh, Reza, Seo, Jaho, Lee, Hanmin et Choi, Seungjoon.
2025.
« Real-time 2D grid map generation for terrain traversability using LiDAR point clouds ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Nourmohammadi, Reza, Zhang, Kaiwen et Talhi, Chamseddine.
2025.
« BlockFed: A novel federated learning framework based on hierarchical weighted aggregation ».
In DEBS 2025 - Proceedings of the 19th ACM International Conference on Distributed and Event-Based Systems (Gothenburg, Sweden, June 10-13, 2025)
pp. 134-145.
Association for Computing Machinery, Inc.
Nunes, Thalya Letícia Moraes et Melhado, Silvio Burratino.
2025.
« The effects of incorporating Artificial Intelligence (AI) into lean construction ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 833-841.
Springer. Nyanyo, Felicia, Hof, Lucas, Zhao, Yaoyao Fiona et Buckenberger, Andy Andy. 2025. « Life cycle assessment of gas turbine package components using sustainable materials and robotic additive manufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Odu, Oluwafemi, Belle, Alvine B., Wang, Song, Kpodjedo, Segla, Lethbridge, Timothy C. et Hemmati, Hadi.
2025.
« Automatic instantiation of assurance cases from patterns using large language models ».
Journal of Systems and Software, vol. 222.
Ofstie, Tyson et Nadarajah, Siva. 2025. « Entropy stable Galerkin projection reduced order model for the discontinuous Galerkin method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Oghbaei, Bahram, Arsenault, Richard, Brissette, François et Matte, Simon.
2025.
« Emphasizing reliability in member-by-member postprocessing of temperature forecasts ».
Journal of Hydrometeorology, vol. 26, nº 6.
pp. 691-707.
Oishique, Sifat, Gorjibandpy, Tahereh, Ghasemi, Kasra, Sokolowski, Marta, Sotelo, Kiene, Tasnim, Syeda et Mahmud, Shohel.
2025.
« Computational fluid dynamics simulation of the indoor microclimate of an enriched-colony cross ventilated commercial layer house in Southern Ontario ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Okine, Andrews A., Adam, Nadir, Naeem, Faisal et Kaddoum, Georges.
2025.
« FedRoute: A multi-server federated meta-DRL routing scheme for tactical air-ground WSNs ».
IEEE Open Journal of the Communications Society, vol. 6.
pp. 4176-4193.
Okine, Andrews A. et Kaddoum, Georges.
2025.
« Quantum machine learning for multi-robot-assisted tactical augmented reality ».
IEEE Internet of Things Magazine, vol. 8, nº 2.
pp. 46-53. Olechowski, Alison. 2025. « Improving hardware design processes with inspiration from software development teams ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Oliveira, Andressa, Granja, José, Machado, Pedro, Motamedi, Ali et Azenha, Miguel.
2025.
« BIM-FM interoperability: Integrating existing FM platform with visualization of IFC models ».
In Proceedings of the International Symposium on Automation and Robotics in Construction (Montreal, QC, Canada, July 28-31, 2025)
pp. 1571-1574.
International Association for Automation and Robotics in Construction (IAARC).
Oliveira-Filho, Adaiton, Comeau, Monelle, Cave, James, Nasr, Charbel, Côté, Pavel et Tahan, Antoine.
2025.
« Wind turbine SCADA data imbalance: A review of its impact on health condition analyses and mitigation strategies ».
Energies, vol. 18, nº 1.
Olivier, Mathieu. 2025. « A multigrid solution strategy based on an explicit time-marching method for the solution of incompressible flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Ollivier, Solenn, Nélisse, Hugues et Voix, Jérémie.
2025.
« On the potential benefits of wide dynamic range compression for workers in loud environments: A scoping literature review ».
International Journal of Occupational Safety and Ergonomics, vol. 31, nº 1.
pp. 181-194.
Omidi, Narges, Houria, Manel, Monjez, Mohamed Meher, Jahazi, Mohammad, Barka, Noureddine et Ouafi, Abderrazak El.
2025.
« Processing parameters optimization for enhanced mechanical strength in PBF-ed H13 tool steel: Minimizing manufacturing defects including microstructural inhomogeneity, sub-surface porosities, and oxide formation ».
International Journal of Advanced Manufacturing Technology, vol. 136, nº 5.
pp. 2681-2706.
Omidi, Narges, Iltaf, Asim, Houria, Manel, Jahazi, Mohammad, Barka, Noureddine et Belzile, Claude.
2025.
« Enhancing mechanical properties of additively manufactured H13: A two-step approach integrating processing parameters optimization and a tailored heat treatment ».
Metals and Materials International, vol. 31, nº 5.
pp. 1286-1312.
Omrani, Salma et Iordanova, Ivanka.
2025.
« Developing adaptive educational spaces through a theoretical framework based on modularity and digital design ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 3: Construction Management (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 630.
pp. 359-373.
Springer.
Opoku-Mensah, Dorina, Cyrus, Akili, John, Jerin et Essel, Ebenezer Ekow.
2025.
« Spacing ratio effects on the interference of three-dimensional twin synthetic jets ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Opperman, Taylor et Wang, Bingchen.
2025.
« Dns study of turbulent flows in a large-amplitude wavy-walled channel ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Orozco, Gabriel, Lamothe, Sébastien, Al-falahat, Wesam, Carret, Jean-Claude et Carter, Alan.
2025.
« Laboratory study on the stiffening phenomena caused by aging and by the addition of kraft lignin at low dosages measured by physico-chemical and rheological tests on a soft bitumen ».
Materials, vol. 18, nº 10.
Orozco, Gabriel, Qabur, Ali et Carter, Alan.
2025.
« Assessing the blending of recycled LDPE flakes with bitumen in mixtures using rheological and thermal properties: A case study ».
Road Materials and Pavement Design.
Osama, Ahmed, Elsaadany, Mahmoud, Shams, Shoukry I. et Gagnon, Ghyslain.
2025.
« Partially-connected hybrid precoders for massive MIMO with finite-resolution phase shifters ».
In International Telecommunications Conference (ITC-Egypt) (Cairo, Egypt, July 28-31, 2025)
pp. 346-351.
Institute of Electrical and Electronics Engineers Inc..
Oshnoei, Soroush, Gheisarnejad, Meysam, Sharifzadeh, Mohammad, Laurendeau, Eric et Al-Haddad, Kamal.
2025.
« Securing grid-connected packed E-Cell multilevel inverter: A LSTM-AE approach to hybrid attack mitigation ».
IEEE Transactions on Automation Science and Engineering, vol. 22.
pp. 21853-21863.
Othman, Abdullah, Evangelista, Joao V. C., Kaddoum, Georges, Au, Minh et Agba, Basile L..
2025.
« On the convergence of transmission power control in multi-microgrid systems ».
In International Wireless Communications and Mobile Computing (IWCMC) (Abu Dhabi, UAE, May 12-16, 2025)
pp. 1616-1621.
Institute of Electrical and Electronics Engineers Inc..
Ouellet-Plamondon, Claudiane, Dantas, Sérgio Roberto Andrade, Londono, Carolina Moreno et Ramirez-Cardona, Diego.
2025.
« Engaging with communities in the Global South to address climate change ».
In ASABE Annual International Meeting (Toronto, ON, Canada, July 13-16, 2025)
American Society of Agricultural and Biological Engineers.
Oukhay, Issam, Chouchen, Moataz, Ouni, Ali et Fard, Fatemeh H..
2025.
« On the performance of large language models for code change intent classification ».
In IEEE International Conference on Software Analysis, Evolution and Reengineering (SANER) (Montreal, QC, Canada, Mar. 04-07, 2025)
pp. 598-603.
Institute of Electrical and Electronics Engineers Inc.. Ould-Chikh, Nour et Thamsuwan, Ornwipa. 2025. « Revue systématique sur l’efficacité des orthèses, prothèses et exosquelettes dans la réhabilitation des troubles musculo-squelettiques du dos chez les adultes ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).
Oveisi, Behzad, Kadoch, Michel, Li, Qia et Hong, Tao.
2025.
« An energy-efficient WSN routing protocol using genetic algorithms and predictive coding ».
In Information Processing and Network Provisioning, Third International Conference, ICIPNP 2024 Spring, Proceedings, Part IV (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2419.
pp. 1-14.
Springer. Oyedele, Oluwakayode, Li, Sihan et Timofeev, Evgeny. 2025. « Numerical simulations of shock wave reflection from the straight wedge with a concave tip ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Oyinlola, Muhammed A., Khorsandi, Mostafa, Penman, Rachael, Earhart, Madison L., Arsenault, Richard, McAdam, Steve, Brauner, Colin J. et St-Hilaire, André.
2025.
« Assessing the impact of climate change and a water management programme on white sturgeon physiology in the Nechako River, British Columbia ».
Conservation Physiology, vol. 13, nº 1.
Pabst-Leonidas, Julia. 2025. « Investigating airflow dynamics in a small CEA plant growth chamber under lunar conditions using computational fluid dynamics (CFD) modeling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Panchi, Grace Parra, Wu, Xiaoyu et Rangom, Yverick. 2025. « Development of a module-level EV thermal management system through CFD analysis to enhance cold-start performance in 21700 lithium-ion batteries ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Pande, Atharva, Kadem, Lyes et Xu, Hang. 2025. « Bi-stable meta-rod structures with designable shape transformation for medical robots ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Pandey, Abhishek Kumar, Das, Ashok Kumar, Wazid, Mohammad, Kaur, Kuljeet, Park, Youngho et Hassan, Mohammad Mehedi.
2025.
« Uncrewed aerial vehicles empowering secure authentication in cognitive IoMT for transformative knowledge discovery in data ».
IEEE Internet of Things Journal, vol. 12, nº 9.
pp. 11329-11346. Paraschivoiu, Marius, Rabiei, Arezoo et Kheiri, Mojtaba. 2025. « Large eddy simulation of oscillating NACA0012 airfoil ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Parashkooh, Hasan Imani et Jian, Cuiying. 2025. « Data-driven insights into partial molar volumes and water-in-oil droplet coalescence ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Paredes-Astudillo, Yenny Alexandra, Botta-Genoulaz, Valérie, Montoya-Torres, Jairo R., Caro, Martha et Jimenez, Jose-Fernando.
2025.
« Incorporating learning and fatigue effects in flowshop scheduling: A case study ».
International Journal of Production Research.
Parvizifard, Yasaman et Jianu, Ofelia A.. 2025. « Design of combined heat and power (CHP) cycles compatible with waste heat sources for decarbonization ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Patel, Parth et Chandra, Ambrish.
2025.
« Model predictive control strategy for single-phase four-cell flying capacitor totem-pole PFC converter with integrated power pulsation buffer ».
In IEEE 34th International Symposium on Industrial Electronics (ISIE) (Toronto, ON, Canada, June 20-23, 2025)
Institute of Electrical and Electronics Engineers Inc..
Patel, Parth et Chandra, Ambrish.
2025.
« Model predictive control strategy for single-phase four-cell flying-capacitor totem-pole PFC converter with integrated power pulsation buffer ».
In IEEE 34th International Symposium on Industrial Electronics (ISIE) (Toronto, ON, Canada, June 20-23, 2025)
Institute of Electrical and Electronics Engineers Inc.. Patel, Rudra, Chudasama, Dhruvrajsinh et Satbhai, Ojas. 2025. « Battery thermal management ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Paternina-Arboleda, C. D., Surakhanova, M. et Montoya-Torres, J. R.. 2025. « Overcoming cocoa supply chain challenges between colombia and the U.S. ». Communication lors de la conférence : AIB Conference, Academy of International Business (Louisville, KY, USA, June 28-July 02, 2025).
Patin, Mathieu et Rousse, Daniel R..
2025.
« Optimizing economic performances of foundation earth-to-air heat exchangers for low-technology residential air-conditioning ».
Energy and Buildings, vol. 328.
Paul, R., Pierre, B., Zhu, C. S., Alain, L. et Guillaume, P..
2025.
« Thickness gauging using a high-temperature electromagnetic acoustic transducer with optimized magnetic field ».
In SPIE Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems (Vancouver, BC, Canada, Mar. 17-20, 2025)
Coll. « Proceedings of SPIE », vol. 13435.
SPIE.
Pavard, Antonin, de Paula, Nathalia et Poirier, Erik.
2025.
« Organizational competencies for BIM adoption: a cross-field analysis in the built asset industry ».
Construction Innovation.
Paziraei, Mahsa et Motamedi, Ali.
2025.
« A survey of visualization techniques for digital twins ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 586-599.
Springer.
Pearl, Daniel, Oliver, Amy, Bulle, Cécile, Greffe, Titouan et Ouellet-Plamondon, Claudiane.
2025.
« Operationalizing urban ecology and circular economy in Montreal’s South-West Neighborhoods using an interdisciplinary approach ».
In
Accelerating the Socio-Ecological Transition: Strategies and Innovations for Sustainable Development.
pp. 5-33. Cham : Springer Nature Switzerland.
Pedneault-Desroches, Joël, Kahwati, Ghofril, Merkhouf, Arezki, Al-Haddad, Kamal et David, Eric.
2025.
« New algorithm for rotor ground wall condition assessment of large salient-pole generators ».
In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025)
Institute of Electrical and Electronics Engineers Inc..
Pedneault-Desroches, Joël, Merkhouf, Arezki, Al-Haddad, Kamal et David, Eric.
2025.
« Rotor pole inter-turn insulation deterioration assessment in hydrogenerator: Methodes comparison including SFRA ».
In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025)
Institute of Electrical and Electronics Engineers Inc..
Peiris, Michael, El-Gindy, Moustafa et Lang, Haoxiang.
2025.
« All-wheel steering and driving control of an 8x8 scaled electric combat vehicle ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Peixoto, Margaux, Soyeux, Dan, Tétreault, Patrice, Begon, Mickaël et Hagemeister, Nicola.
2025.
« Effect of congruence variations on a musculoskeletal model considering humeral head displacements ».
Journal of Biomechanics, vol. 190.
Pejman, Hossein, Coulombe, Stéphane, Vazquez, Carlos et Vakili, Ahmad.
2025.
« Efficient region-wise packing of stereoscopic ERP videos based on information loss minimization ».
IEEE Access, vol. 13.
pp. 122132-122149. Pelletier, Simon, Mongrain, Alexandre et Lalonde, Sébastien. 2025. « Modeling approach for analyzing braided shielding structures in HV cables under bending loads ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Pelletier-Guénette, Joël, Mercier-Aubin, Alexandre et Andrews, Sheldon.
2025.
« Real-time triangle-SDF continuous collision detection ».
Proceedings of the ACM on Computer Graphics and Interactive Techniques, vol. 8, nº 4.
Pelletier-Huot, Maxime, Duval, Hélène, Rochette, Audrey, Imran, Ali, Braga, Rafael, Bouteiller, Yann, Varadharajan, Vivek Shankar, Beltrame, Giovanni, Abdalwhab Bakheet, Mohamed Abdalwhab, Aissaoui, Rachid et St-Onge, David. 2025. « DESSAIM ». Communication lors de la conférence : IEEE International Conference on Robotics and Automation (ICRA): Arts in Robotics (Atlanta, GA, USA, May 19-23, 2025).
Peña, Diana A., Montoya-Torres, Jairo R. et Amodeo, Lionel.
2025.
« A sustainable Two-Echelon waste collection routing: Understanding waste picker behavior ».
Socio-Economic Planning Sciences, vol. 102.
Peña-Calderon, D., Montoya-Torres, J. R. et Amodeo, L.. 2025. « Sustainable routing for recyclable waste collection in low- and middle-income countries ». Communication lors de la conférence : 28th International Conference on Production Research (ICPR 2025) (Bogota, Colombia, July 13-17, 2025).
Penzel, Nora, Polosecki, Pablo, Addington, Jean, Arango, Celso, Asgari-Targhi, Ameneh, Billah, Tashrif, Bouix, Sylvain, Calkins, Monica E., Campbell, Dylan E., Cannon, Tyrone D., Castro, Eduardo, Cho, Kang Ik K., Coleman, Michael J., Corcoran, Cheryl M., Dwyer, Dominic, Frangou, Sophia, Fusar-Poli, Paolo, Glynn, Robert J., Haidar, Anastasia, Harms, Michael P., Jacobs, Grace R., Kambeitz, Joseph, Kapur, Tina, Kelly, Sinead M., Koutsouleris, Nikolaos, Abhinandan, K. R., Kucukemiroglu, Saryet, Kwon, Jun Soo, Lewandowski, Kathryn E., Li, Qingqin S., Mantua, Valentina, Mathalon, Daniel H., Mittal, Vijay A., Nicholas, Spero, Pandina, Gahan J., Perkins, Diana O., Potter, Andrew, Reichenberg, Abraham, Reinen, Jenna, Sand, Michael S., Seitz-Holland, Johanna, Shah, Jai L., Srinivasan, Vairavan, Srivastava, Agrima, Stone, William S., Torous, John, Vangel, Mark G., Wang, Jijun, Wolff, Phillip, Yao, Beier, Anticevic, Alan, Wolf, Daniel H., Zhu, Hao, Bearden, Carrie E., McGorry, Patrick D., Nelson, Barnaby, Kane, John M., Woods, Scott W., Kahn, Rene S., Shenton, Martha E., Cecchi, Guillermo et Pasternak, Ofer.
2025.
« Data analysis strategies for the Accelerating Medicines Partnership® Schizophrenia Program ».
Schizophrenia, vol. 11, nº 1.
Pépin, Stéphane Morin et Francis, Adel.
2025.
« Ability of technologies to collect the positioning and occupancy of work crews and resources on construction job sites ».
Open Civil Engineering Journal, vol. 19.
Pereira, Ingryd V. S. T., Cavalcanti, George D. C. et Cruz, Rafael M. O..
2025.
« Multi-view autoencoders for fake news detection ».
In IEEE Symposium on Computational Intelligence in Natural Language Processing and Social Media (CI-NLPSoMe) (Trondheim, Norway, Mar. 17-20, 2025)
Institute of Electrical and Electronics Engineers Inc..
Perraton, Daniel, Carter, Alan, Raschia, Simone, Grilli, Andrea, Graziani, Andrea, Pasquini, Emiliano, De Maeijer, Patricia Kara, Presti, Davide Lo, Pasetto, Marco, Tebaldi, Gabriele et Dave, Eshan.
2025.
« Impact of the compaction and curing on the properties of cement-bitumen treated materials (CBTM) ».
In
Recycling asphalt pavement: State-of-the-art of the RILEM technical committee 264-RAP.
Coll. « RILEM State-of-the-Art Reports », vol. 44.
pp. 5-98. Springer.
Petrillo, Fabio.
2025.
« Should we use Rust Platform in our IoT Applications? A multivocal review ».
In IEEE/ACM 7th International Workshop on Software Engineering Research & Practices for the IoT (SERP4IoT) (Ottawa, ON, Canada, Apr. 27, 2025)
pp. 24-31.
Institute of Electrical and Electronics Engineers Inc..
Pham Van Bang, Damien et Nguyen, Kim Dan.
2025.
« Asymmetric wave-induced scour around a vertical cylinder ».
In Book of Abstracts THESIS-2025, 6th Int. Symposium on Two-phase Modeling for Sediment Dynamics in Geophysical Flows (Leuven, Belgium, Oct. 13-15, 2025)
pp. 42-43.
Hydraulics Laboratory, Dept. of Civil Engineering, KU Leuven, Belgium. Pham Van Bang, Damien et Nguyen, Kim Dan. 2025. « Retour d’expérience sur les protections côtières au Vietnam ». Communication lors de la conférence : Réseau Québécois d’Adaptation et de Gestion des Zones Côtières (RQAGZC) (Rivière-du-Loup, QC, Canada, May 21-23, 2025).
Pham, Quang Hung et Gagnon, Martin.
2025.
« Adaptive filtering techniques for self-detecting outliers in signals: A case study of runner strain measurements ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Phan, Bao Vy, Bui, Quang Tri, Tran, Nguyen Duy Phuong, Dinh, Truong Hoang Vinh, Truong, Quoc Thanh et Ngo, Anh-Dung.
2025.
« Design of a device using for upper limb rehabilitation of post-stroke patients ULCPM1024 ».
In Proceedings of the 4th Annual International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2024): Volume 3: Sustainable Approaches in Machine Design, Life Cycle Engineering, and Energy Management for Manufacturing Processes (Da Nang, Vietnam, Sept. 18-21, 2024)
Coll. « Lecture Notes in Mechanical Engineering »
pp. 423-429.
Springer.
Phyu, Hnin Pann, Naboulsi, Diala et Stanica, Razvan.
2025.
« ICE-CREAM: multI-agent fully CooperativE deCentRalizEd frAMework for Energy Efficiency in RAN Slicing ».
IEEE Transactions on Network and Service Management, vol. 22, nº 2.
pp. 1859-1873.
Phyu, Hnin Pann, Stanica, Razvan et Naboulsi, Diala.
2025.
« MARIO: Multi-Agent ResIlience framewOrk for network slicing in tactical networks ».
In IEEE International Conference on Communications Workshops (ICC Workshops) (Montreal, QC, Canada, June 08-12, 2025)
pp. 1658-1663.
Institute of Electrical and Electronics Engineers Inc..
Phyu, Hnin Pann, Stanica, Razvan et Naboulsi, Diala.
2025.
« SNOW: A split reinforcement learning approach for energy efficiency in tactical network slicing ».
In IEEE 26th International Symposium on a World of Wireless, Mobile and Multimedia Networks (WoWMoM) (Fort Worth, TX, USA, May 27-30, 2025)
pp. 31-40.
Institute of Electrical and Electronics Engineers Inc..
Pillet, Charles, Sagitov, Ilshat, Balatsoukas-Stimming, Alexios et Giard, Pascal.
2025.
« Restart mechanisms for the successive-cancellation list-flip decoding of polar codes ».
Entropy, vol. 27, nº 3.
Pillet, Charles, Sagitov, Ilshat, Deslandes, Dominic et Giard, Pascal.
2025.
« Successive-cancellation flip and perturbation decoder of polar codes ».
In IEEE Wireless Communications and Networking Conference (WCNC) (Milan, Italy, Mar. 24-27, 2025)
Institute of Electrical and Electronics Engineers Inc..
Pillet, Charles, Sagitov, Ilshat et Giard, Pascal.
2025.
« On reducing decoding complexity of successive-cancellation list flip decoding of polar codes ».
Journal of Signal Processing Systems for Signal Image and Video Technology, vol. 97, nº 5-6.
pp. 293-306.
Pinsonnault-Skvarenina, Alexis, Nélisse, Hugues, Bonnet, Fabien, Hotton, Mathieu et Voix, Jérémie.
2025.
« Evaluating the performances of direct-to-consumer hearing devices: A comparative study of electroacoustic, acoustic transparency, and passive attenuation characteristics ».
Journal of the Acoustical Society of America, vol. 158, nº 5.
pp. 3781-3792.
Pinto, Gabriel M., Helal, Emna, Ribeiro, Hélio, David, Eric, Demarquette, Nicole R. et Fechine, Guilhermino J. M..
2025.
« Effect of environmental temperature and semi-crystalline order on the toughening of polyamide 1010 by 2D nanomaterials ».
Polymer Composites, vol. 46, nº 1.
pp. 715-734.
Pinto, Gabriel M., Staffa, Lucas, Helal, Emna, Hahn, Carolina, Vieira, Lucia, Ribeiro, Hélio, David, Eric, Demarquette, Nicole R. et Fechine, Guilhermino J. M..
2025.
« Balancing thermal conductivity, dielectric, and tribological properties in polyamide 1010 with 2D nanomaterials ».
Journal of Applied Polymer Science, vol. 142, nº 1.
Pinto, Gabriel Matheus, Delbari, Seyed-Ali, Dravigné, Julien, Bedwani, Stéphane, Helal, Emna, Demarquette, Nicole et Hof, Lucas. 2025. « Evaluating the rheological behavior of irradiated 3D-printed PLA parts for medical applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Pinto, Gabriel Matheus, Estakhrianhaghighi, Ehsan, Demarquette, Nicole, Hof, Lucas et Akbarzadeh, Abdolhamid. 2025. « Sustainable circular economy approach to utilize biodegradable wood fibers reinforced biocomposites in environmentally-benign architected materials ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Pirabaharan, Navienan et Gkouti, Elli. 2025. « Density-based defect detection in composite materials using magnetic levitation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Pita Ruiz, Julian L., Dalvand, Narges et Ménard, Michaël.
2025.
« Integrated silicon nitride devices via inverse design ».
Nature Communications, vol. 16, nº 1.
Pita Ruiz, Julian L., Sengupta, Dipankar, Tremblay, Christine, Li, Ming-Jun, Dainese, Paulo et Ménard, Michaël.
2025.
« 7×100 Gb/s multicore fiber link enabled by an inverse-designed dual-polarization coupler ».
In Optical Fiber Communication Conference in Proceedings Optical Fiber Communication Conference, OFC 2025 and Optical Fiber Communication Conference (OFC) (San Francisco, CA, USA, Mar. 30-Apr. 03, 2025)
Optical Society of America.
Pita, Julian, Dainese, Paulo et Ménard, Michael.
2025.
« Inverse design fiber-to-chip couplers for the O- and C-bands ».
Optics Letters, vol. 50, nº 6.
pp. 1973-1976. Plourde, M. et Gagnon, C.. 2025. « Entre désirabilité écologique et réalité construite : un premier pas vers la généalogie des vulnérabilités en design et en architecture ». Communication lors de la conférence : La société face aux vulnérabilités : Réflexions et perspectives pour les disciplines de conception (Nîmes, France, 1-2 juillet 2025).
Poissenot-Arrigoni, Bastien, Martin, Laurence, Negrini, Alessia, Berbiche, Djamal, Doutres, Olivier et Sgard, Franck.
2025.
« Reliability of an extended version of the 3m™ Eargage tool to assess earcanal size and assist earplug selection ».
International Journal of Audiology, vol. 64, nº 4.
pp. 392-401. Polotski, Vladimir et Kenné, Jean-Pierre. 2025. « Production policy optimization in manufacturing systems with long-run average cost based on vanishing discount approach ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Pommée, Timothy, Bouserhal, Rachel, Chang, Tiffany, Renaud, Florence, Borges, Cecilia Maria Ferreira, Bockstael, Annelies et Verduyckt, Ingrid.
2025.
« Acoustic conditions and student perceptions in a Québec classroom: A case study ».
Noise & Health, vol. 27, nº 128.
pp. 602-613.
Pouresmaeeliasiabar, Hossein et Motamedi, Ali.
2025.
« Framework for acoustic comfort analysis in digital twins ».
In Proceedings of the International Symposium on Automation and Robotics in Construction (Montreal, QC, Canada, July 29-31, 2025)
pp. 1371-1378.
International Association for Automation and Robotics in Construction (IAARC).
Pourrahimi, Shamim, Milanese, Julien, Habibnejad-Korayem, Mahdi, Bocher, Philippe et Hof, Lucas A..
2025.
« Impact of powder reuse on corrosion properties in Ti-6Al-4V alloy parts fabricated by laser beam powder bed fusion ».
Progress in Additive Manufacturing, vol. 10, nº 12.
pp. 11849-11867.
Pourreza, Mohammad, Bouzid, Abdel-Hakim et Benfriha, Khaled.
2025.
« Innovative 3D FE modeling of mechanical rolling in tube-to-tubesheet joints: A comparative analysis with hydraulic expansion ».
In ASME 2025 Pressure Vessels & Piping Conference (Montreal, QC, Canada, July 20-25, 2025)
Coll. « Computer Technology & Bolted Joints », vol. 2.
New York, NY, USA : ASME.
Presti, Davide Lo, Vasconcelos, Kamilla, dos Santos Pinheiro, Gustavo, del Barco Carrión, Ana Jiménez, Orešković, Marko, Pasetto, Marco, Pasquini, Emiliano, Carter, Alan, Margaritis, Alexandros, Van den Bergh, Wim, Carbonneau, Xavier, Guduru, Gurunath, Eskandarsefat, Shanin, Preti, Francesco, Dave, Eshan V., Tebaldi, Gabriele, Airey, Gordon, Viscione, Nunzio et Russo, Francesca.
2025.
« RAP characterisation by assessing the relative degree of binder activity ».
In
Recycling asphalt pavement: State-of-the-art of the RILEM technical committee 264-RAP.
Coll. « RILEM State-of-the-Art Reports », vol. 44.
pp. 147-175. Springer.
Profir, Cleopatra, Tepylo, Nick, Paas, Anita et St-Onge, David.
2025.
« Analysis of the importance of cognitive risk factors in professional RPAS operations ».
In 44th Digital Avionics Systems Conference (DASC) (Montreal, QC, Canada, Sept. 14-18, 2025)
Proot-Lafontaine, Ronan, Merabtine, Abdelatif, Henriot, Geoffrey et Maref, Wahid.
2025.
« Assessment and enhancement of indoor environmental quality in a school building ».
Sustainability, vol. 17, nº 12.
Proulx, Melick et Gardoni, Mickael.
2025.
« Proposal of a global collaboration index: a tool to monitor collaboration between SMEs using card-based collaborative platforms ».
International Journal on Interactive Design and Manufacturing, vol. 19, nº 4.
pp. 2683-2695.
Proust-Androwkha, Sonia, Psyché, Valéry, Kyriakoglou, Revekka, Boubaker, Anis, Lallé, Sébastien, Chartofylaka, Lamprini, Medeiros Machado, Guilherme et El Mawas, Nour.
2025.
« Beyond programming assistance towards the integration of generative AI into computer science education: A scoping review ».
In Artificial Intelligence in Education: 26th International Conference, AIED 2025, Proceedings, Part V (Palermo, Italy, July 22-26, 2025)
Coll. « Lecture Notes in Computer Science », vol. 15881.
pp. 380-389.
Springer.
Prud'homme, Alberto et Nabki, Frederic.
2025.
« Cost-effective photoacoustic imaging using high-power light-emitting diodes driven by an avalanche oscillator ».
Sensors, vol. 25, nº 6.
Pulatsu, Ezgi et Udenigwe, Chibuike C.. 2025. « Designing edible substrates for four-dimensional (4D) printing applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Qashqai, Pouria, Babaie, Mohammad, Zgheib, Rawad et Al-Haddad, Kamal.
2025.
« Implementation of deep reinforcement learning for model-free switching and control of a 23-level single DC source hybrid packed U-cell (HPUC) ».
IEEE Access, vol. 13.
pp. 172293-172305. Qin, Shaoxiang, Zhan, Dongxue, Marey, Ahmed, Potsis, Theodore et Wang, Liangzhu (Leon). 2025. « Generalizable deep learning for rapid urban wind field prediction trained on only 24 CFD simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Quayson-Sackey, Emmanuel, Kankam, Eugene, Nyantekyi-Kwakye, Baafour, Saeedi, Mohammad et Asgari, Ehsan.
2025.
« Investigating wake dynamics around airfoils with varying slip lengths using proper orthogonal decomposition ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Quirion, Thomas et Ouellet-Plamondon, Claudiane.
2025.
« Exploring bio-based materials for acoustic applications: Sustainable solutions and performance analysis ».
In Bio-Based Building Materials - Proceedings of ICBBM 2025, Volume 1 (Rio de Janeiro, Brazil, June 17-20, 2025)
Coll. « RILEM Bookseries », vol. 60.
pp. 445-456.
Springer Nature.
Radan, Lida, Songmene, Victor, Samuel, Agnes M. et Samuel, Fawzy H..
2025.
« Effects of alloy composition, hardness, and milling parameters on the cutting forces of Al-Li-based alloys ».
Materials, vol. 18, nº 12.
Radwan, Huda et Pope, Dr. Kevin.
2025.
« Techno-economics of interior-point optimization for grid-integrated wind-hydrogen systems ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Rafatian, Benjamin, Sharafdin, Pezhman et Motamedi, Ali.
2025.
« Integrating privacy-preserving occupancy estimation using thermal camera with a digital twin platform ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 2, Simulation and Automation (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 629.
pp. 613-625.
Springer Science and Business Media Deutschland GmbH.
Rahim, Muddasir, Basit, Abdul, Nguyen, Thanh Luan et Kaddoum, Georges.
2025.
« Maximizing URLLC reliability through JPSA for URLLC services in IRS-aided Terahertz networks ».
In IEEE Wireless Communications and Networking Conference (WCNC) (Milan, Italy, Mar. 24-27, 2025)
Institute of Electrical and Electronics Engineers Inc..
Rahim, Muddasir, Basit, Abdul, Selim, Bassant et Kaddoum, Georges.
2025.
« Hierarchical IRS-assisted user association for sum-rate maximization in hybrid THz LEO-HAPS-terrestrial networks ».
IEEE Communications Letters.
Rahim, Muddasir, Nguyen, Thanh Luan et Kaddoum, Georges.
2025.
« JPUSA in coexistence of eMBB and URLLC services in multi-cell IRS-assisted Terahertz networks ».
IEEE Transactions on Green Communications and Networking, vol. 9, nº 3.
pp. 1206-1223.
Rahiminia, Shahab, Mehrabi, Amir, Jabbarzadeh, Armin et Aghaee, Mohsen Pourseyed.
2025.
« A hybrid optimization approach for designing sustainable intermodal freight transport under mixed uncertainty ».
Socio-Economic Planning Sciences, vol. 98.
Rahmani, Hossein et Frigaard, Ian. 2025. « New network models for yield stress fluid flows in porous media ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Rahmani, Hossein, Izadi, Mahdi et Frigaard, Ian. 2025. « Squeeze cementing with multiple perforations: Fast computations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Rahmani, Hossein et Taghavi, Seyed Mohammad. 2025. « Viscoplastic flows in superhydrophobic channels: Theoretical modeling and computation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Rahmani, Zahra, Malek, Sardar et Frigaard, Ian. 2025. « Prediction of stress distributions in eccentric wellbores: Analytical and numerical modeling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Rainville, C. et Lemaire, R..
2025.
« Analysis of the sooting propensity of kerosene surrogates and blends containing alcohols and esters ».
In 13th Mediterranean Combustion Symposium (Corfu, Greece, June 01-05, 2025)
Rainville, C. et Lemaire, R..
2025.
« Analysis of the sooting tendency of a kerosene surrogate blended with various furans ».
In Proceedings of Combustion Institute - Canadian Section, Spring Technical Meeting (Calgary, AB, Canada, May 12-15, 2025)
Rainville, Carl, Lemaire, Romain, Laflamme, Simon, Souno, Ibrahima et Seers, Patrice.
2025.
« Sooting tendency of a series of kerosene surrogates and blends containing various additives considered as sustainable alternative fuels ».
Energy & Fuels, vol. 39, nº 14.
pp. 6991-7011.
Rajakrishnan, Navneeth, Sadeghifar, Morteza, Bhattacharjee, Pinaki, Champliaud, Henri et Jahazi, Mohammad.
2025.
« Kinetics of austenite formation in a medium-carbon, low-alloy steel with an initial martensite microstructure: Influence of prior austenite grain size ».
Journal of Manufacturing and Materials Processing, vol. 9, nº 1.
Ramadasan, Manigandan, Tahmi, Omar, Ould-Slimane, Hakima, Talhi, Chamseddine et Suganya, G..
2025.
« Privacy-preserving machine learning inference for intrusion detection ».
In Foundations and Practice of Security: 17th International Symposium, FPS 2024, Revised Selected Papers, Part II (Montréal, QC, Canada, Dec. 09-11, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15533.
pp. 29-42.
Springer.
Ramandi, Milad Darzi, Jabbarzadeh, Armin, Chaabane, Amin et Amodeo, Lionel.
2025.
« Green supply chain coordination with profit-sharing and government intervention: A game-theoretic approach applied to the pharmaceutical industry ».
Journal of the Operational Research Society.
Ramezani, Ghazaleh, Silva, Ixchel Ocampo, Stiharu, Ion, Ven, Theo G. M. van de et Nerguizian, Vahe.
2025.
« Lasso model-based optimization of CNC/CNF/rGO nanocomposites ».
Micromachines, vol. 16, nº 4.
Ramezani, Mohammadmehdi et Karimpour, Shooka. 2025. « Comparative evaluation of incompressible and density-varied approaches for turbulence analysis in hydraulic jumps ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Ramezani, Sana et Chu, Vincent H..
2025.
« OpenFOAM simulation of the gravity current front in submergence on an incline ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ramirez Velasquez, Jorge Mauricio et Iordanova, Ivanka.
2025.
« A maturity model defining the synergy between digital twin and lean construction to support construction progress monitoring ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2024, Volume 3: Engineering Management (Niagara Falls, ON, Canada, June 05-07, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 697.
pp. 373-384.
Springer.
Ramirez, Jorge Mauricio et Iordanova, Ivanka.
2025.
« Analysis of the integration between digital twins and lean construction for construction projects ».
In Annual Conference of the International Group for Lean Construction, IGLC (Osaka, Japan, June 02-08, 2025)
Coll. « IGLC », vol. 33.
pp. 941-952.
International Group for Lean Construction.
Ramírez-Villamil, A., Montoya-Torres, J. R. et Jaegler, A..
2025.
« Trends and advances in urban logistics research: A systematic literature review ».
Journal of Advanced Transportation.
Ramo, Andrea Arroyo, Morency, Clara, Moreau, Stéphane, Bauerheim, Michaël et Sandberg, Richard D..
2025.
« Noise prediction of a controlled diffusion airfoil at high angle-of-attack ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Rand, Charles P., Bernier, Etienne et Bédard, Serge.
2025.
« Opportunities of high temperature heat pump integration in various industrial subsectors ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ranjha, Ali, Naboulsi, Diala, Emary, Mohamed El et Gagnon, Francois.
2025.
« Consumer-centric sustainability: Empowering URLLC in multi-UAV-assisted MEC systems for industry 5.0 ».
IEEE Transactions on Consumer Electronics, vol. 71, nº 2.
pp. 4304-4316.
Raphe, Peyman, Ameur, Mohamed et Ross, Douglas.
2025.
« A novel CFD-experimental analysis for enhancing air distribution and indoor air quality in existing buildings using high induction diffusers ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Raschia, Simone, Carter, Alan et Tattolo, Stefano.
2025.
« Mechanical evaluation of asphalt mixtures containing recycled bituminous membranes (RBMs) ».
Journal of Testing and Evaluation, vol. 53, nº 5.
Rasolonirina, Tony, Painchaud-April, Guillaume, Le Duff, Alain et Belanger, Pierre.
2025.
« Visualization of specular reflections with phase coherence imaging using sub-apertures ».
Ultrasonics, vol. 155.
Rathee, Geetanjali, Garg, Sahil, Kaddoum, Georges, Alzanin, Samah M. et Hassan, Mohammad Mehedi.
2025.
« An improved and decentralized/distributed healthcare framework for disabled people through AI models ».
Alexandria Engineering Journal, vol. 125.
pp. 441-448.
Rathee, Geetanjali, Garg, Sahil, Kaddoum, Georges, Alzanin, Samah M. et Hassan, Mohammad Mehedi.
2025.
« Enhanced healthcare using generative AI for disabled people in Saudi Arabia ».
Alexandria Engineering Journal, vol. 124.
pp. 265-272. Ratté, Sylvie et Ménard, Pierre André. 2025. « Guide d’utilisation de l’IA pour l’analyse automatique des altérations du langage dans la caractérisation des aphasies et leur évolution ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 5-9 mai 2025).
Rayhani, Mahsheed et Jian, Cuiying.
2025.
« Mechanistic understanding of the effects of graphene oxide on the thermal conductivity of polymer fuel cells ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Raymond, Camélia, Daoust, Marc-Kevin et Ratté, Sylvie.
2025.
« Le développement d'une IA explicable : Entre principes éthiques généraux et mesures concrètes ».
Dialogue: Canadian Philosophical Review / Revue canadienne de philosophie, vol. 64, nº 1.
pp. 81-99.
Rentschler, Tobias, Tismer, Alexander et Riedelbauch, Stefan.
2025.
« Frame field prediction for quadrilateral domain partition ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Reumont, Marie, Simard, Magali et Lapalme, James.
2025.
« The unanticipated performativity of an observation grid through the evolution of its forms of agency ».
Qualitative Research in Organizations and Management.
Rezaei, Farshad, Kheirir, Mojtaba et Paraschivoiu, Marius. 2025. « LES analysis over the edge of a building roof-top for wind turbine placement ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Rezaei, Farshad et Paraschivoiu, Marius.
2025.
« Power performance of vertical axis wind turbine in Martian atmosphere using CFD simulation ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Rezaei, Hanie, Ebrahimiazar, Maryam, Zargartalebi, Mohammad et Sinton, David. 2025. « Accelerated fluid discovery for data center immersion cooling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Rezaei, Mohammadhossein, Helal, Emna et Demarquette, Nicole R.. 2025. « Optimizing nozzle geometry for extrusion-based additive manufacturing to accommodate various grades of polyethylene ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Rezaei, Yosef, Alishahi, Marzieh, Akbari, Soheil et Frigaard, Ian. 2025. « Yield stress fluid displacement by Newtonian fluid in a wavy annular geometry: Experimental observations and insights ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Rezaeizadeh Herozi, Morteza, Carret, Jean-Claude, Babadopulos, Lucas F. A. L. et Bilodeau, Kevin.
2025.
« Numerical and experimental investigation of the appropriate geometry of asphalt specimens for quality control using impact resonance tests ».
Journal of Testing and Evaluation.
Rezazad Gohari, Ali, Lamothe, Sébastien, Bilodeau, Jean-Pascal, Mansourian, Ahmad et Carter, Alan.
2025.
« Laboratory study on synergistic effects of Sasobit® on rheological and chemo-thermal properties of lignin-modified bitumen ».
Road Materials and Pavement Design, vol. 26, nº 4.
pp. 841-869.
Rezkallah, M., Shamsodine, T., Patel, P., Chandra, A., Sanjeev, S., Ibrahim, H. et Raddaoui, A..
2025.
« Design, control and real-time testing of off-grid solar system based on high gain QZSBC with storage system and single-phase inverter ».
In IEEE Industry Applications Society Annual Meeting (IAS) (Taipei, Taiwan, June 15-20, 2025)
Institute of Electrical and Electronics Engineers Inc..
Richard Soucy, Ruan-Isabelle, Smith, Adam W., Dupuis, Kevin, Tabiai, Ilyass et Dubé, Martine.
2025.
« Large scale fused-granular-fabrication using recycled carbon fibre/PEKK-PEEK pellets derived from aerospace prepreg waste ».
Composites Communications, vol. 60.
Richet, Nicolas, Belharbi, Soufiane, Aslam, Haseeb, Schadt, Meike Emilie, Gonzalez-Gonzalez, Manuela, Cortal, Gustave, Lameiras Koerich, Alessandro, Pedersoli, Marco, Finkel, Alain, Bacon, Simon et Granger, Eric.
2025.
« Textualized and feature-based models for compound multimodal emotion recognition in the wild ».
In Computer Vision – ECCV 2024 Workshops, Proceedings, Part XV (Milan, Italy, Sept. 29-Oct. 04, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15637.
pp. 60-78.
Springer Nature. Rinaldi, Joseph-Raffael et Vermeire, Brian. 2025. « High-order direct numerical simulation of finite span wings ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Rincón Jaramillo, Ana Maria, Yung, Marcus, Yazdani, Aamin et Thamsuwan, Ornwipa.
2025.
« A review of anthropometric databases for an inclusive workforce: Constructing databases ».
In Proceedings of the 22nd Congress of the International Ergonomics Association, Volume 1: Better Life Ergonomics for Future Humans (IEA 2024) (Jeju Island, Korea, Aug. 25-29, 2024)
Coll. « Springer Series in Design and Innovation », vol. 39.
pp. 283-290.
Springer Nature.
Rios, Andrew, Alier, Achok, Aneja, Mihir, Nimeri, Farah, Lavery, Kayla, Fisher, Jack, Wiyathunge, Rochana, Kubicki, Marek, Yeterian, Edward, Bouix, Sylvain, Makris, Nikos, Arciniega, Hector et Rushmore, R. Jarrett.
2025.
« High-resolution segmentation of the cavum septum pellucidum in young adult human brains ».
Frontiers in Neuroanatomy, vol. 19.
Robaczewski, Tomek, Johansson, Emile et Bodkhe, Sampada. 2025. « 3D printing of encapsulated continuous metal wires ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Robert, Armel, Bisulandu, Baby-Jean Robert Mungyeko, Ilinca, Adrian et Rousse, Daniel R..
2025.
« Hybrid wind-redox flow battery system for decarbonizing off-grid mining operations ».
Applied Sciences, vol. 15, nº 13.
Roberts, Matt, Ouellet-Plamondon, Claudiane et Raftery, Paul.
2025.
« Embodied carbon in mechanical, electrical, and plumbing systems: A critical literature review ».
Building and Environment, vol. 275.
Robinson, Brandon, Sandhu, Rimple, Khalil, Mohammad, Poirel, Dominique, Pettit, Chris et Sarkar, Abhijit. 2025. « Bayesian sparse learning of the Leishman-Beddoes model of aerodynamic stall using data from aeroelastic wind tunnel experiments ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Robinson, Katherine M., Flowers, Gwenn E., Baraër, Michel et Rounce, David R..
2025.
« Modelling glacier mass balance and runoff in the Kaskawulsh River headwaters of Southwest Yukon, Canada, 1980–2022 ».
Hydrological Processes, vol. 39, nº 6.
Rocca, Michele, Andrews, Sheldon et Erleben, Kenny.
2025.
« Policy-space interpolation for physics-based characters ».
Proceedings of the ACM on Computer Graphics and Interactive Techniques, vol. 8, nº 4.
Rocca, Michele, Darkner, Sune, Erleben, Kenny et Andrews, Sheldon.
2025.
« Policy-space diffusion for physics-based character animation ».
ACM Transactions on Graphics, vol. 44, nº 3.
Rochefort, Philippe, Précourt, Louis, Winckelmans, Grégoire et Dumas, Guy.
2025.
« Characterization of flow curvature effects on a NACA 0015 airfoil attached at the quarter-chord ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Rodger, Melanie, Lerouge, Sophie et Ahmadi, Ali. 2025. « Optimizing pectin-stabilized albumin-based foams for enhanced support bath stability in in-foam embedded bioprinting ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Rodgers, Marianne. 2025. « Maintenance issues and research opportunities in the operation of a 12-year-old 10 MW wind R&D park ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Rodriguez, J., Jian, X., Panigrahi, S. S., Zhang, T., Feizi, A., Puri, A., Kalkunte, A., Savard, F., Masry, A., Nayak, S., Awal, R., Massoud, M., Abaskohi, A., Li, Z., Wang, S., Noël, P. A., Richter, M. L., Vadacchino, S., Agarwal, S., Biswas, S., Shanian, S., Zhang, Y., Bolger, N., MacDonald, K., Fauvel, S., Tejaswi, S., Sunkara, S., Monteiro, J., Dvijotham, K. D. J., Scholak, T., Chapados, N., Kharagani, S., Hughes, S., Özsu, M., Reddy, S., Pedersoli, M., Bengio, Y., Pal, C., Laradji, I., Gella, S., Taslakian, P., Vazquez, D. et Rajeswar, S..
2025.
« BigDocs: An open dataset for training multimodal models on document and code tasks ».
In 13th International Conference on Learning Representations, ICLR 2025 (Singapore, Apr. 24, 2025)
pp. 21011-21067.
International Conference on Learning Representations, ICLR.
Rodriguez, Juan A., Puri, Abhay, Agarwal, Shubham, Laradji, Issam H., Rajeswar, Sai, Vazquez, David, Pal, Christopher et Pedersoli, Marco.
2025.
« StarVector: Generating scalable vector graphics code from images and text ».
[Article de conférence]. Proceedings of the AAAI Conference on Artificial Intelligence, vol. 39, nº 28.
pp. 29691-29693.
Rojas-Hernandez, Juan Jos., Solis-Quesada, Alexander et Gonzalez-Llorente, Jesus D..
2025.
« Development of an integrated system for screening and testing of electrochemical cells for cubesats ».
In IEEE 12th International Workshop on Metrology for AeroSpace (MetroAeroSpace) (Naples, Italy, June 18-20, 2025)
pp. 12-17.
Institute of Electrical and Electronics Engineers Inc.. Romann, Kay, Nedi, Jovan et Higgins, Andrew. 2025. « Cavitation threshold sensitivity to nuclei in accelerated liquids ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Romdhane, Sarra Fekih, Zhang, Kaiwen et De Santa-Eulalia, Luis Antonio.
2025.
« Towards efficient and fine-grained traceability for a live lobster supply chain using blockchain technology ».
In 6th International Conference on Industry 4.0 and Smart Manufacturing (Prague, Czech Republic, Nov. 20-22, 2024)
Coll. « Procedia Computer Science », vol. 253.
pp. 612-625.
Elsevier.
Romeas, Thomas, Goujat, Maëlle, Faubert, Jocelyn et Labbé, David.
2025.
« No transfer of 3D-Multiple Object Tracking training on game performance in soccer: A follow-up study ».
Psychology of Sport and Exercise, vol. 76.
Romero, German et Lombana, Mauricio.
2025.
« Development of a Python-based BEM software for multi-physical analysis and development of energy ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ronan, William, Wang, Zhaokai et Wang, Xian.
2025.
« Quantifying aleatoric uncertainty for mobile robot object detection ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ropagnol, X., Garcia-Rosas, C. M., Uchida, H., Blanchard, F. et Ozaki, T..
2025.
« Electro-optic and intensity-based terahertz peak field evaluation: Comparison, challenges and perspectives ».
JPhys Photonics, vol. 7, nº 4.
Roshan, Shamim, Momen, Gelareh, Jafari, Reza, Fofana, Issouf et Brettschneider, Stephan.
2025.
« Advanced dual-responsive silicone-based nanocomposites: Enhancing the de-icing efficacy of power transmission lines by harnessing magnetic and solar energy ».
Materials Today Communications, vol. 49.
Rousseau, Rashique Iftekhar et Bouzid, Abdel-Hakim.
2025.
« Effect of clamped member material and thickness on bolt self-loosening under transverse loads ».
Materials, vol. 18, nº 2.
Roy, Dominic et Nadarajah, Siva. 2025. « Nonlinearly stable flux reconstruction for implicit large eddy simulation of wall-bounded flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Roy-Saillant, Alexina, Dumas, Guy et Olivier, Mathieu.
2025.
« Importance of gravitational effects on the performances of a fully-passive oscillating-foil turbine deployed horizontally ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Rübenstrunk, Alexander, Barcenas, Oscar Espinosa et Botez, Ruxandra Mihaela.
2025.
« New methodology for aerodynamic forces calculations in unmanned aerial systems optimization design ».
In AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum (Orlando, FL, USA, Jan. 06-10, 2025)
Coll. « AIAA Paper », vol. AIAA 2025-0849.
American Institute of Aeronautics and Astronautics Inc, AIAA. Rughani, Rohan, Naidu, Jyoti Prakash et Garces, Irina. 2025. « Additive manufacturing of dentures using polyether ether ketone ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Ruiz, Julian L. Pita, Dalvand, Narges et Ménard, Michaël.
2025.
« Inverse-designed 90-degree silicon nitride bends for the C band ».
Journal of Lightwave Technology, vol. 43, nº 12.
pp. 5804-5810.
Rzig, Insaf, Jaafar, Wael, Jebalia, Maha et Tabbane, Sami.
2025.
« Energy-efficient vehicular task offloading using multi-mode MEC and RIS-equipped aerial platforms ».
IEEE Open Journal of the Communications Society, vol. 6.
pp. 7604-7619.
Saadabad, Neda Zahedi, Wang, Qingsong et Chandra, Ambrish.
2025.
« A multilayer PCB coil for self-resonant wireless power transfer systems ».
IEEE Transactions on Industrial Electronics.
Saadabad, Neda Zahedi, Wang, Qingsong et Chandra, Ambrish.
2025.
« Performance comparison of coil geometries in self-resonant wireless power transfer system ».
IEEE Transactions on Industry Applications, vol. 61, nº 4.
pp. 6022-6030. Sababha, Hussam et Daqaq, Mohammed. 2025. « Transforming incompressible computational fluid dynamics into a convex optimization framework ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Saboor, Abdul, Naveed, Muhammad Taha, Kandage, Thasanka et Manzoor, Muhammad Taha. 2025. « Techno-economic analysis for the deployment of electric thermal energy storage systems using binary chloride salts in Edmonton, Alberta ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Sabouhi, Fatemeh, Jabalameli, Mohammad Saeed, Jabbarzadeh, Armin et Fahimnia, Behnam.
2025.
« A hybrid approach for resilient sourcing and supply chain network design ».
Annals of Operations Research.
Sabr, Ohood, Kaddoum, Georges et Kaur, Kuljeet.
2025.
« HiSO-CoMA: Hierarchical self-optimizing framework for O-RAN slicing using cooperative multiple agent deep reinforcement learning ».
IEEE Open Journal of the Communications Society, vol. 6.
pp. 9632-9653.
Sabr, Ohood, Kaddoum, Georges et Kaur, Kuljeet.
2025.
« PABSO-DRL: Power and beam self-optimization scheme for multiple slices in MU-MISO systems ».
IEEE Transactions on Consumer Electronics, vol. 71, nº 2.
pp. 4343-4358.
Sabr, Ohood, Kaur, Kuljeet et Kaddoum, Georges.
2025.
« A secure multi-radio resource scheme using cooperative DRL agents for heterogeneous Inter-RAN slicing under hardware impairments ».
IEEE Internet of Things Journal.
Sabr, Ohood, Kaur, Kuljeet et Kaddoum, Georges.
2025.
« SOIS-A2C scheme: Facilitating management of multi-radio resources in heterogeneous inter-RAN slicing in the presence of hardware impairments ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 1414-1419.
Institute of Electrical and Electronics Engineers Inc..
Sadabadi, Mahdieh S., Sharifzadeh, Mohammad, Laurendeau, Eric, Gheisarnejad, Meysam, Khooban, Mohammad-Hassan, Portillo, Ramon, Franquelo, Leopoldo Garcia et Al-Haddad, Kamal.
2025.
« Robust vector current control of grid-interactive smart Packed E-Cell multi-level inverters under non-ideal grid conditions ».
IEEE Transactions on Energy Conversion, vol. 40, nº 2.
pp. 1009-1021.
Sadeghi, Maryam, Sharawi, Mohammad S., Beyragh, Dagwood S., Kouki, Ammar B., Helaoui, Mohamed, Outaleb, Noureddine, Chen, Wenhua et Ghannouchi, Fadhel M..
2025.
« A broadband LTCC-based cavity-backed patch phased array antenna for Ka-band applications ».
IET Microwaves Antennas & Propagation, vol. 19, nº 1.
Sadeghi, Niloufarsadat et Aubertin, Jonathan D..
2025.
« Scale-dependent recursive analysis of topographical roughness: A methodology for differentiating geological and geomechanical features from point cloud data ».
Engineering Geology, vol. 354.
Sadeghifar, Morteza, Billardon, Rene, Delagnes, Denis, Champliaud, Henri, Tahan, Antoine et Jahazi, Mohammad.
2025.
« Addressing viscosity-driven singularities: Accurate development of thermo-elasto-visco-plastic constitutive models ».
Mechanics of Time-Dependent Materials, vol. 29, nº 4.
Sadr, Motahareh et Vétel, Jérôme. 2025. « Investigating Lagrangian detachment versus Eulerian separation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
SaediArdahaei, Saeid et Pham, Xuan-Tan.
2025.
« Multi-response optimization of aluminum laser spot welding with sinusoidal and cosinusoidal power profiles based on Taguchi-Grey relational analysis ».
Materials, vol. 18, nº 13.
Safarbati, Rafik, Jahazi, Mohammad et Dourandish, Simin. 2025. « Full field modeling of austenite grain growth using the level set method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Safdar, Mutahar, Wood, Gentry, Zimmermann, Max, Hannesen, Florian, Paul, Padma, Lamouche, Guy, Wanjara, Priti et Zhao, Yaoyao Fiona. 2025. « Applying artificial intelligence in directed energy deposition additive manufacturing of metal matrix composites: Lessons and experiences for industrial implementation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Safinezhad, Atefe, Kumar, Aashutosh, Al-Hadi, Richard et Ung, Bora. 2025. « Quantum Sensing based on Nitrogen Vacancy (NV) centers in diamond ». Communication lors de la conférence : Congrès annuel des étudiants chercheurs de l'ÉTS (CAEC-ETS) (Montréal, QC, Canada, Mar. 12, 2025).
Saghafi, Marzia, Mohajernia, Bita et Urbanic, Ruth Jill.
2025.
« Design and deposition sequence approaches for enhanced residual stress management in directed energy deposition ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Sagitov, Ilshat, Pillet, Charles, Balatsoukas-Stimming, Alexios et Giard, Pascal.
2025.
« Generalized restart mechanism for successive-cancellation flip decoding of polar codes ».
Journal of Signal Processing Systems for Signal Image and Video Technology.
Sahamifar, Soheil, Naylor, David et Friedman, Jacob. 2025. « Addressing inconsistencies in interferometric nanofluid heat transfer studies ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Sahebari, Seyed Mahmoud Seyedi, Ganza, Carmel, Barari, Ahmad et Ziki, Jana Abou. 2025. « ML-driven real-time monitoring of glass microchannel fabrication with spark-assisted chemical engraving (SACE) technology ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Sakka, Mohamed Anis, Jaafar, Wael et Langar, Rami.
2025.
« Predicting cyberattack duration in next generation networks: A novel transformer-based approach ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 3144-3149.
Institute of Electrical and Electronics Engineers Inc..
Salah, Mohamed Khalil Ben, Jouvet, Philippe et Noumeir, Rita.
2025.
« RPPG estimation: Vision Transformer with 3D temporal central difference ».
IEEE Transactions on Instrumentation and Measurement, vol. 74.
Salas Gordoniz, Jorge Esteban, Saad, Maarouf et St-Onge, David.
2025.
« Simple tuning for an adaptive and model-free control of indoor airships ».
Journal of Computational and Nonlinear Dynamics, vol. 20, nº 8.
Salazar, Gamaliel, Lemyre-Baron, Jean-Sebastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine.
2025.
« Analysis of cooling regimes as a function of Biot number during quenching by immersion ».
Heat Transfer.
Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine.
2025.
« Analysis of geometry orientation in the calculation of transient heat fluxes during immersion quenching of hollow cylinder ».
In QDE 2025: Proceedings of the 3rd International Conference on Quenching and Distortion Engineering (Vancouver, BC, Canada, May 06-07, 2025)
pp. 133-140.
ASM International.
Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine.
2025.
« Determination of thermal boundary conditions using piecewise hermite polynomials during the air transfer step of an industrial quenching process ».
Journal of Thermal Science and Engineering Applications, vol. 17, nº 9.
Salimi, Ali et Ince, Ayhan. 2025. « Graph convolutional networks for modeling elastic-plastic stress and strain fields near cracks ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Sallam, Mahmoud et Kaur, Kuljeet.
2025.
« Optimized resource forecasting for carbon-intelligent data centers with temposight: A hybrid deep learning approach ».
IEEE Internet of Things Journal, vol. 12, nº 23.
pp. 49884-49903.
Sallam, Mahmoud, Kaur, Kuljeet et Kaddoum, Georges.
2025.
« Advanced home energy management using proximal policy optimization with a comprehensive appliance set ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 5779-5784.
Institute of Electrical and Electronics Engineers Inc..
Saloux, Etienne, Candanedo, José A., Vallianos, Charalampos, Morovat, Navid et Zhang, Kun.
2025.
« From theory to practice: A critical review of model predictive control field implementations in the built environment ».
Applied Energy, vol. 393.
Samii, Dara Rahmat et Tembely, Moussa. 2025. « Numerical simulation and prediction of particle distribution based on aeroacoustics signals emitted by the HVAF process ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Sanchez, Daniela, Butt, Sajid et Qureshi, Ahmed.
2025.
« AI-enabled machine vision model for manual process monitoring and cycle time measurement ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Sani, Iman Shirzaei, Demarquette, Nicole R. et David, Eric.
2025.
« Enhancing the dielectric properties of recycled polyolefin streams through blending ».
Sustainability, vol. 17, nº 9.
Santamaria, Jorge, Bierrenbach-Lima, André, Sanjosé, Marlène et Moreau, Stéphane.
2025.
« Shape considerations for the design of propellers with trailing edge serrations ».
Journal of Sound and Vibration, vol. 595.
Sarailoo, Hassan, Belamri, Thabet, Campbell, Lesley et Bougherara, Habiba. 2025. « Enhancing sustainable agriculture through heat recovery from light fixtures in indoor vertical farming systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Saram, Muhammad et Yang, Jianming.
2025.
« An analytical model of a horizontal axis wind turbine blade with coupled flapwise-edgewise-torsion motions ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Sarantos, Panagis, Violos, John et Leivadeas, Aris.
2025.
« Enabling semi-supervised learning in intrusion detection systems ».
Journal of Parallel and Distributed Computing, vol. 196.
Sarker, Manobendu, Hassan, Md Zoheb et Kaddoum, Georges.
2025.
« Joint user association and bandwidth assignment for digital twin-assisted multi-RAT networks ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 2156-2161.
Institute of Electrical and Electronics Engineers Inc.. Sarmah, Sidharth, Das, Tuhin, Brahimi, Salim, Yue, Stephen et Song, Jun. 2025. « A new modeling approach to predict hydrogen embrittlement induced ductile-to-brittle transition in high strength steels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Sarvarmaleki, Sorayya Ghaffari, Rancourt, David et Poncet, Sebastien.
2025.
« CFD analysis of magnetorheological fluid clutch ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Satbhai, Ojas, Chamudia, Jaykishan et Badheka, Vishvesh.
2025.
« Numerical and experimental studies to characterize the weld width variation for copper in gas tungsten arc welding process ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Sauzéat, C., Carbonneau, X., Carter, A., Di Benedetto, H., Hofko, B., Jaczewski, M., Mangiafico, S., Perraton, D., Petit, C., Poulikakos, L., Pszczola, M., Steiner, D., Szydlowski, C., Fakhari Tehrani, F., Zaumanis, M. et Zofka, A..
2025.
« Low temperature behaviour of bituminous mixtures: Thermal stress restrained specimen test ».
In
Phase and Interphase Behaviour of Bituminous Materials: State-of-the-Art Report of the RILEM TC 272-PIM.
Coll. « RILEM State-of-the-Art Reports », vol. 43.
pp. 55-103. Springer. Savard, Geneviève et Beaudin, Michel. 2025. « Histoire et conséquences de l’intégration du calcul symbolique dans notre enseignement ». Communication lors de la conférence : Congrès de l’Association mathématique du Québec (Montréal, QC, Canada, 24-25 oct. 2025).
Saviz Naeini, Saeed, Snaiki, Reda et Wu, Teng.
2025.
« Advancing spatio-temporal storm surge prediction with hierarchical deep neural networks ».
Natural Hazards.
Savsani, Jiya et Savsani, Vimal. 2025. « Feasibility of highway wind and solar energy harvesting using VAWT in Canada ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Savsani, Poonam et Savsani, Vimal.
2025.
« Multi-objective optimization of a robotic trajectory problem using NS-TLBO ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Sayeed, Tahmid Ibn, Gollamudi, Siddhartha, Fauchoux, Melanie, Payan, Samira et Simonson, Carey.
2025.
« Effect of frosting on performance and greenhouse gas emissions of absorption heat pumps in cold climates ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Schmitt, Laura, Levasseur, Annie, Vaillancourt, Michel et Lachance-Tremblay, Éric.
2025.
« Life cycle assessment of various pavement rehabilitation techniques: A case study ».
Transportation Research Part D: Transport and Environment, vol. 139.
Schneider, Elisa Terumi Rubel, Schneider, Fernando Henrique, Paraiso, Emerson Cabrera, Britto, Alceu Souza Britto et Menelau Oliveira Cruz, Rafael.
2025.
« MedGemma-Sum-Pt: A lightweight model for portuguese clinical summarization ».
In CLEF 2025 Working Notes: Working Notes of the Conference and Labs of the Evaluation Forum (Madrid, Spain, Sept. 09-12, 2025)
Coll. « CEUR Workshop Proceedings », vol. 4038.
pp. 582-594.
CEUR-WS. Schwarz, Udo. 2025. « Mechanisms of nanoscale deformation in bulk metallic glasses investigated using pillar compression ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Sebastian, Rejeena, Ahmad, Redwan, Lafreniere-Greig, Jonathan, Ropagnol, Xavier et Blanchard, François.
2025.
« Real-time material identification using a fast and simplified ai-assisted terahertz spectrometer ».
IEEE Transactions on Terahertz Science and Technology.
Segers, Thibaut, Cohic, Antoine, Montes de Oca, Carlos Silva et Thamsuwan, Ornwipa. 2025. « Évaluation de l’efficacité d’un exosquelette de soutien dorsal passif sur l’activité musculaire ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).
Seifi Davari, Hossein, Botez, Ruxandra Mihaela, Seify Davari, Mohsen et Chowdhury, Harun.
2025.
« Wind turbine optimization by blade element momentum method and particle swarm optimization technique ».
Journal of Engineering, vol. 2025, nº 1.
Seitz-Holland, J., Haaf, M., Mendes-Silva, A. P., Penzel, N., Berberich, C., Breithaupt, L., Leicht, G., Bouix, S., Coleman, M. J., Kotler, E., Kim, N., Lewandowski, K. E., Holt, D., Keshavan, M. S., Öngür, D., Breier, A., Shenton, M. E., Diniz, B. S., Arnold, S. E. et Kubicki, M..
2025.
« Inflammation and aging in psychosis - a transdiagnostic proteomics study using the human connectome project for early psychosis (HCP-EP) ».
[Résumé d'une communication à une conférence]. International Journal of Neuropsychopharmacology, vol. 28, nº suppl. 2.
ii179-ii180.
Seitz-Holland, Johanna, Jacobs, Grace R., Reinen, Jenna, Mathalon, Daniel, Corcoran, Cheryl, Reichenberg, Abraham, Vangel, Mark, Glynn, Robert J., Penzel, Nora, Cho, Kang-Ik K., Castro, Eduardo, Haidar, Anastasia, Addington, Jean M., Kapur, Tina, Bouix, Sylvain, Bearden, Carrie E., Kane, John M., McGorry, Patrick D., Woods, Scott W., Nelson, Barnaby, Kahn, René S., Shenton, Martha E., Cecchi, Guillermo A. et Pasternak, Ofer.
2025.
« Incidence, prevalence, and stability of remission in individuals with clinical high risk for psychosis ».
JAMA Network Open, vol. 8, nº 8.
Selva, Jessica S. G., Li, Yuanjiao, Kaur, Jashanpreet, Juneau, Antoine, Diraki, Ahmad, Bendahmane, Souhaila, Henderson, Jeffrey D., Aloisio, Mark D., Messina, Anastasia, Nezamzadeh, Ahmadreza, Viasus Perez, Camilo J., Biesinger, Mark C., Levasseur, Annie, Crudden, Cathleen M. et Mauzeroll, Janine.
2025.
« N-Heterocyclic carbene deposition on a copper powder surface using mechanochemistry ».
ACS Applied Materials and Interfaces, vol. 17, nº 6.
pp. 10004-10013.
Sendra, T. et Belanger, P..
2025.
« On the use of a Transformer Neural Network to deconvolve ultrasonic signals ».
Ultrasonics, vol. 152.
Sepahi, Nima, Ilinca, Adrian et Rousse, Daniel R..
2025.
« Multi-criteria decision analysis for evaluating carbon capture technologies in power plants ».
Renewable and Sustainable Energy Reviews, vol. 219.
Serre, Rémy, Nadot-Martin, Carole et Bocher, Philippe.
2025.
« Equivalent Inclusion Method (EIM) for isotropic and anisotropic spatially oriented spheroidal inhomogeneities: A unified calculation module validated via comparisons to Finite Element (FE) simulations ».
Mechanics of Materials, vol. 201.
Seyed Hosseini, Seyed Hamed, Hajzargarbashi, Seyedhossein, Côté, Gabriel et Liu, Zhaoheng.
2025.
« Transfer learning approach for estimating modal parameters of robot manipulators using minimal experimental data ».
Vibration, vol. 8, nº 4.
Seyed Hosseini, Seyed Hamed, Hajzargarbashi, Seyedhossein et Liu, Zhaoheng.
2025.
« Enhancing robotic manipulator performance through analyzing vibration, identifying deep-learning-based modal parameters, and estimating frequency response functions ».
International Journal of Advanced Manufacturing Technology.
Seyedkanani, Alireza, Cai, Jun et Akbarzadeh, Abdolhamid. 2025. « A multistable origami-inspired magneto-active metamaterial ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shabani, Mahdi, Kadoch, Michel et Mirjalili, Seyedali.
2025.
« A novel metaheuristic-based approach for prediction of corrosion characteristics in offshore pipelines ».
Engineering Failure Analysis, vol. 170.
Shabeer, Yasmin, Madani, Seyed Saeed, Panchal, Satyam, Mousavi, Mahboubeh et Fowler, Michael. 2025. « Different metal-air batteries as range extenders for the electric vehicle 2 market: A comparative study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shabir, Muhammad Muneem, Zhang, Kaiwen, Reulet, Bertrand et Gagnon, Ghyslain.
2025.
« Qaas: hybrid cryptocurrency wallet-as-a-service based on Quantum RNG ».
Cluster Computing, vol. 28, nº 3.
Shah, Aaryaman, Zarasvand, Kamran A., Dijvejin, Zahra A., Harvey, Derek, Momen, Gelareh, Golovin, Kevin et Zarifi, Mohammad H..
2025.
« Multilocation microwave ice sensor for integrated, zone-based deicing ».
IEEE Transactions on Aerospace and Electronic Systems, vol. 61, nº 3.
pp. 7179-7192.
Shahboulaghi, Amirhossein Shafaei, Duhaime, François et Braun, Andreas.
2025.
« Unravelling champlain clay subsidence: Integrating persistent scatterer InSAR and finite-element modeling ».
Journal of Geotechnical and Geoenvironmental Engineering, vol. 151, nº 1.
Shahcheraghian, Amir, Ilinca, Adrian et Sommerfeldt, Nelson.
2025.
« K-means and agglomerative clustering for source-load mapping in distributed district heating planning ».
Energy Conversion and Management: X, vol. 25.
Shahid, Muhammad Zubair, Farooqi, Ahmad Salam, Hossain, Mohammad Mozahar et Nemitallah, Medhat Ahmed. 2025. « Hydrogen production with CO2 capture: A thermodynamic analysis of sorption enhanced WGS reaction using Li4SiO4/MgO sorbent ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shahinmoghadam, Mehrzad et Motamedi, Ali.
2025.
« Benchmarking pre-trained text embedding models in aligning built asset information ».
Scientific Reports, vol. 15, nº 1.
Shahraki, Amirehsan, Taherzadeh, Mohammad, Rahmatollahi, Shoeib et Nabki, Frederic.
2025.
« A clock-less coherent ultrawideband detector for active-reflector-based ranging with high interference rejection ».
Analog Integrated Circuits and Signal Processing, vol. 125, nº 1.
Shahryari, Benyamin, Mofatteh, Hossein, Sargazi, Arian, Mirabolghasemi, Armin, Meger, David, Kalamkarov, Alex et Akbarzadeh, Abdolhamid. 2025. « Harnessing multimodal multistability for next-generation soft robotic arms ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shaikh, Mohd. Rizwan et Forouzanfar, Mohamad.
2025.
« Dual-stream CNN-LSTM architecture for cuffless blood pressure estimation from PPG and ECG signals: A PulseDB study ».
IEEE Sensors Journal, vol. 25, nº 2.
pp. 4006-4014. Shakeri, Amin, Ghazal, Abdallah et Karimfazli, Ida. 2025. « From experiments to theory: 3D modeling of yield-stress fluid injection in confined pipes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Shakeri, Amin, Ghazal, Abdallah et Karimfazli, Ida. 2025. « Impact of three-dimensional effects on yield-stress fluid injection in eccentric pipes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shakibafar, Behnam, Amrhar, Abdessamad, Gagné, Jean-Marc, Landry, René et Nabki, Frederic.
2025.
« Flight test results of an adaptive RF front-end for multi-band SDR in avionics ».
IEEE Access, vol. 13.
pp. 130770-130781.
Shamaeian, Neda, Taghavifar, Hamid et Zhang, Youmin.
2025.
« Adaptive LMI-based observer for disturbed nonlinear systems with unknown Lipschitz constant ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Shamsaei, Mohsen, Carter, Alan et Vaillancourt, Michel.
2025.
« Utilisation of steel slag aggregates to propose novel asphalt pavement structures alleviating urban heat islands ».
Road Materials and Pavement Design.
Shamsolmoali, Pourya, Zareapoor, Masoumeh, Das, Swagatam, Granger, Eric et Garcia, Salvador.
2025.
« Hybrid Gromov-Wasserstein embedding for capsule learning ».
IEEE Transactions on Neural Networks and Learning Systems, vol. 36, nº 2.
pp. 2480-2494.
Sharafi, Masoumeh, Ollivier, Emma, Zeeshan, Muhammad Osama, Belharbi, Soufiane, Koerich, Alessandro Lameiras, Pedersoli, Marco, Bacon, Simon et Granger, Eric.
2025.
« Disentangled source-free personalization for facial expression recognition with neutral target data ».
In IEEE 19th International Conference on Automatic Face and Gesture Recognition (FG) (Tampa, FL, USA, May 26-30, 2025)
Institute of Electrical and Electronics Engineers Inc..
Sharifzadeh, Mohammad, Laurendeau, Eric et Al-Haddad, Kamal.
2025.
« Hybrid model predictive SHM control for zero CMV in three-phase five-/nine-level packed E-cell inverter ».
IEEE Transactions on Industrial Electronics, vol. 72, nº 3.
pp. 2210-2221.
Sharifzadeh, Mohammad, Laurendeau, Eric, Fathollahi, Arman, Gheisarnejad, Meysam, Sadabadi, Mahdieh S. et Al-Haddad, Kamal.
2025.
« Single DC-source three-phase modified packed U-cell inverter with reduced components and active capacitor voltage balancing ».
IEEE Open Journal of the Industrial Electronics Society, vol. 6.
pp. 1448-1460. Sharpe, Peter et Lubitz, William. 2025. « Measurements and simulation of internal fan-driven airflow in a commercial greenhouse ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shayegh, Somaye Valizade et Tadj, Chakib.
2025.
« Balanced neonatal cry classification: Integrating preterm and full-term data for RDS screening ».
Information, vol. 16, nº 11.
Shayegh, Somaye Valizade et Tadj, Chakib.
2025.
« Deep audio features and self-supervised learning for early diagnosis of neonatal diseases: Sepsis and respiratory distress syndrome classification from infant cry signals ».
Electronics, vol. 14, nº 2.
Shboul, Ahmad Al et Izquierdo, Ricardo. 2025. « Innovative sensor technologies for monitoring food and healthcare applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Shboul, Ahmad Al, Mechai, Fazia et Izquierdo, Ricardo. 2025. « Impact of pH on room-temperature synthesis of zinc oxide nanoparticles for developing flexible gas sensors ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shekar, Arjun Chandra, Sawalmeh, Atef, Zitoune, Redouane et Hof, Lucas A..
2025.
« Optimization of surface texturing parameters in additively manufactured continuous fiber composites using abrasive waterjet technique for composite repair applications ».
Composites Part A: Applied Science and Manufacturing, vol. 190.
Shekar, Arjun Chandra, Todescato, Marco, Leclair, Jean-Philippe, Sorgato, Marco, Zitoune, Redouane et Hof, Lucas A.
2025.
« Studies on additive manufacturing for polymer repair: Material extrusion and reverse engineering approaches ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Shen, Siyuan, Shao, Tianjia, Zhou, Kun, Jiang, Chenfanfu, Andrews, Sheldon, Zordan, Victor et Yang, Yin.
2025.
« Elastic locomotion with mixed second-order differentiation ».
In SIGGRAPH Conference Papers '25: Proceedings of the Special Interest Group on Computer Graphics and Interactive Techniques Conference Conference Papers (Vancouver, BC, Canada, Aug. 10-14, 2025)
Association for Computing Machinery, Inc.
Shendy, Mohamed, Maftoon, Nima et Salehian, Armaghan.
2025.
« The existence of truncation resonance in TPMS-based periodic acoustic metamaterials ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Sheremetyev, V., Lezin, V., Lukashevich, K., Prokoshkin, S. et Brailovski, V..
2025.
« Improving superelasticity of a laser powder bed-fused Ti-Zr-Nb alloy via the ingot composition adjustments ».
Materials Letters, vol. 398.
Sherman, Steve, Mao, Min, Choi, Young et Wereley, Norman. 2025. « Experimental validation of a magnetorheological fluid activation flow CFD analysis ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Sherwood, Adam et Laliberté, Jeremy.
2025.
« Preliminary radiator sizing for a polymer electrolyte membrane fuel cell electric aircraft ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Shi, Jiahao, Ju, Kang, Chen, Haoyu, Orsat, Valerie, Sasmito, Agus P., Ahmadi, Ali et Akbarzadeh, Abdolhamid.
2025.
« Ultrahigh piezoelectricity in truss-based ferroelectric ceramics metamaterials ».
Advanced Functional Materials, vol. 35, nº 12.
Shi, Jiahao, Ju, Kang, Chen, Haoyu, Orsat, Valerie, Sasmito, Agus, Ahmadi, Ali et Akbarzadeh, Hamid. 2025. « Ultrahigh piezoelectricity in ferroelectric ceramic truss-based metamaterial ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shi, Shengqiang, Merabtine, Abdelatif, Peng, Jie, Sarmouk, Mohammed Dhiya Eddine et Bennacer, Rachid.
2025.
« Numerical assessment of indoor thermal comfort in residential buildings: A comparison of radiant and all-air cooling systems ».
Journal of Building Physics, vol. 49, nº 1.
pp. 67-101. Shirazi, Peimaneh et Rosen, Marc A.. 2025. « Solar-assisted foundation-based geothermal energy system performance assessment ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shoaei, Aran, Farshbaf-Roomi, Farnam et Wang, Qingsong.
2025.
« Enhanced multi-objective design optimisation of salient pole reluctance magnetic gear using bayesian-optimised artificial neural networks ».
IET Electric Power Applications, vol. 19, nº 1.
Shoaei, Aran, Farshbaf-Roomi, Farnam, Wang, Qingsong et Al-Haddad, Kamal.
2025.
« Design optimization of hybrid magnet CMGs with non-uniform air-gap considering demagnetization analysis ».
In IEEE 34th International Symposium on Industrial Electronics (ISIE) (Toronto, ON, Canada, June 20-23, 2025)
Institute of Electrical and Electronics Engineers Inc.. Shokraneh, Saman et Floryan, Jerzy Maciej. 2025. « Flow control using surface vibrations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shokrollahi, Maryam, Smith, Adam W., Levy, Arthur, Dubé, Martine et Tabiai, Ilyass.
2025.
« Reassessing anisotropy in 3D printed structures: The role of extrudate geometry vs interface bonding ».
Journal of Manufacturing Processes, vol. 149.
pp. 456-472. Shokrollahi, Maryam, Vassal, Orlane, Dubé, Martine et Tabiai, Ilyass. 2025. « Impact of nozzle length and extrusion speed on tensile properties of FFF-printed filaments ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Shuaibu, Abdurrashid Hassan, Rabih, Almur A. S., Blaquière, Yves et Nabki, Frederic.
2025.
« Push-push electrothermal MEMS actuators with Si-to-Si contact for DC power switching applications ».
Micromachines, vol. 16, nº 9.
Sikri, Aman, Selim, Bassant et Kaddoum, Georges.
2025.
« Energy harvesting aided PASTAR-RIS-empowered NOMA system in the presence of impulsive noise ».
IEEE Transactions on Vehicular Technology.
Silva Santana, Johnson et Ouellet-Plamondon, Claudiane.
2025.
« The materials bio-based constructions: A review of the methods of LCA ».
In Bio-Based Building Materials - Proceedings of ICBBM 2025 : Volume 2 (Rio de Janeiro, Brazil, June 17-20, 2025)
pp. 259-265.
Springer Nature.
Silva-Rodríguez, Julio, Ben Ayed, Ismail et Dolz, Jose.
2025.
« Conformal prediction for zero-shot models ».
In IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR) (Nashville, TN, USA, June 10-17, 2025)
pp. 19931-19941.
IEEE Computer Society.
Silva-Rodríguez, Julio, Chakor, Hadi, Kobbi, Riadh, Dolz, Jose et Ben Ayed, Ismail.
2025.
« A Foundation Language-Image Model of the Retina (FLAIR): Encoding expert knowledge in text supervision ».
Medical Image Analysis, vol. 99.
Silva-Rodríguez, Julio, Chakor, Hadi, Kobbi, Riadh, Murugesan, Balamurali, Kabir, Waziha, Chelbi, Jihed, Racine, Marc-André, Dolz, Jose et Ben Ayed, Ismail.
2025.
« Parameter-efficient fine-tuning of ophthalmology foundation models for robust hypertensive retinopathy detection and triage ».
Investigative Ophthalmology & Visual Science, vol. 66, nº 8.
Silva-Rodríguez, Julio, Dolz, Jose et Ben Ayed, Ismail.
2025.
« Towards foundation models and few-shot parameter-efficient fine-tuning for volumetric organ segmentation ».
Medical Image Analysis, vol. 103.
Silvirianti, X. et Kaddoum, Georges.
2025.
« Quantum adaptive learning for coverage optimization in LEO satellite network ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 2382-2387.
Institute of Electrical and Electronics Engineers Inc..
Simard, Alexandre, Cirino, Fabiana, Levesque, Mélanie, Lachance, Mathieu, Iqbal, Fawaz et David, Eric.
2025.
« In-depth analysis of partial discharge measurements performed with two different instruments on individual stator coils ».
In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025)
Institute of Electrical and Electronics Engineers Inc..
Simmons, Scott et Lubitz, William.
2025.
« Manufacturing through millenia: A structural investigation of Archimedes screws ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Simmons, Scott, Manor, Matan, Dorier, Alexis, Mendes, Catarina Esposito et Lubitz, William.
2025.
« Experimental measurement of gap leakage and the fill height gradient in Archimedes screw pumps ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Sinan, Saif, Bakr, Mahmoud, Fareh, Raouf, Saad, Maarouf et Bettayeb, Maamar.
2025.
« Evaluation of control techniques for quadcopter UAV attitude tracking ».
Journal of Control and Decision, vol. 12, nº 6.
pp. 1091-1106.
Sinan, Saif, Ghommam, Jawhar, Saad, Maarouf, Fareh, Raouf et Bettayeb, Maamar.
2025.
« Cascaded extended-state-observer-based synergetic control for quadcopter translational dynamics ».
Journal of Field Robotics.
Singh, Amardip Kumar et Nguyen, Kim Khoa.
2025.
« User handover aware hierarchical federated learning for Open RAN based next-generation mobile networks ».
IEEE Transactions on Machine Learning in Communications and Networking, vol. 3.
pp. 848-863.
Sion, Sion Israel, Nguyen-Phan, Trinh, Fortin, Mélissa, Mes-Masson, Anne-Marie et Zhang, Kaiwen.
2025.
« Transforming biospecimen management: A roadmap for integrated sample traceability in the era of global research ».
Biopreservation and Biobanking.
Skevi, Lorena, Ke, Xinyuan, Ginestet, Stéphane, Ouellet-Plamondon, Claudiane, Gomes, Fernando et Cyr, Martin.
2025.
« Reviewing experimental studies on chemical thermal energy storage in Cementitious composites: report of the RILEM TC 299-TES ».
Materials and Structures, vol. 58, nº 9.
Slamani, Mohamed, Chatelain, Jean-François et Jammel, Siwar.
2025.
« The effect of lubricant and nanofiller additives on drilling temperature in GFRP composites ».
Journal of Composites Science, vol. 9, nº 10.
Slamani, Mohamed, Elhadi, Abdelmalek, Amroune, Salah, Arslane, Mustapha, Alothman, Othman Y., Awayssa, Omar, Chatelain, Jean-François et Jawaid, Mohammad.
2025.
« Analysis of entry and exit hole delaminations during drilling of jute/palm fiber reinforced hybrid composites using HSS drill bits ».
Journal of Natural Fibers, vol. 22, nº 1.
Slamani, Mohamed, Elhadi, Abdelmalek, Amroune, Salah, Arslane, Mustapha, Zaoui, Moussa, Alrasheedi, Nashmi, Louhichi, Borhen et Chatelain, Jean-François.
2025.
« Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites ».
Measurement: Journal of the International Measurement Confederation, vol. 249.
Slamani, Mohamed, Jammel, Siwar et Chatelain, Jean-François.
2025.
« Effects of wax and graphene concentrations on cutting force in drilling GFRP composites: A comprehensive study using a full factorial design of experiments ».
Journal of Composite Materials.
Slopecki, Matthew, Charbonneau, Mathieu, Deguire, Simon, Côté, Julie N. et Clément, Julien.
2025.
« Technical performance analyses in elite Paralympic swimming using wearable technology: Two case studies ».
Sports Biomechanics.
Slopecki, Matthew, Clément, Julien, Charbonneau, Mathieu et Côté, Julie N..
2025.
« Measuring the impact of limb asymmetry on movement irregularity and complexity changes during an incremental step test in para-swimmers using inertial measurement units ».
Sensors, vol. 25, nº 11.
Smart, Emma, Roussel, Olivia et Jenkyn, Thomas. 2025. « Abnormal frontal and transverse plane moments of the hindfoot in pes cavus and pes planus foot pathologies measured with a multi-segment kinetic foot model ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Smith, A. W., Pattery, H., Canart, J. P., Tabiai, I. et Dubé, M..
2025.
« Upcycling of unidirectional carbon-fibre/PEEK prepreg trim waste ».
Composites Part A: Applied Science and Manufacturing, vol. 198.
Snaiki, Reda et Merabtine, Abdelatif.
2025.
« Recent advances on machine learning techniques for urban heat island applications: A review and new horizons ».
Sustainable Cities and Society, vol. 134.
Soares, Matheus, Campion, Donatien, Brailovski, Vladimir et Kreitcberg, Alena. 2025. « In-situ monitoring of LPBF metal process using a dual-wavelength thermal camera compared to numerical simulations and experimental measurements ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Sobral, Taj, Nedi, Jovan et Higgins, Andrew J.. 2025. « Instabilities in a conducting liquid metal column ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Sokakini, Soumaya, Simo Tala, Jules Voguelin, Nadau, Lionel, Ilinca, Adrian et Bougeard, Daniel.
2025.
« Heat transfer enhancement in shell and tube Latent Heat Thermal Energy Storage units for waste heat recovery applications: A 3D numerical study on melting–solidification kinetics ».
Applied Thermal Engineering, vol. 274, nº Part B.
Sokakini, Soumaya, Tala, Jules Voguelin Simo, Nadau, Lionel, Ilinca, Adrian et Bougeard, Daniel.
2025.
« Numerical analysis of partial charging effect in a latent heat thermal energy storage unit ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Sokolowski, Marta, Gorjibandpy, Tahereh, Oishique, Sifat, Tasnim, Syeda et Mahmud, Shohel.
2025.
« A review on different approaches for evaluating ventilation rate in laying hen facilities ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Soltaniani, Farnaz, Ghafari, Mohammad et Sayagh, Mohammed.
2025.
« Security bug report prediction within and across projects: A comparative study of BERT and random forest ».
In 21st International Conference on Predictive Models and Data Analytics in Software Engineering-PROMISE (Trondheim, Norway, June 26, 2025)
pp. 85-94.
Association for Computing Machinery.
Song, Xuanting, Wang, Jun, Deng, Gaoqiang, Zheng, Zijie, Zou, Yongzhou, Liang, Shiwei, Dai, Yuxing et Al-Haddad, Kamal.
2025.
« Investigation on electrical properties and safe-operating area for novel split-gate IGBTs ».
In IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) (Beijing, China, Aug. 15-17, 2025)
Institute of Electrical and Electronics Engineers Inc..
Sosa Méndez, Deira, Bedolla-Martínez, David, Saad, Maarouf, Kali, Yassine, García Cena, Cecilia E. et Álvarez, Ángel L..
2025.
« Upper-limb robotic rehabilitation: Online sliding mode controller gain tuning using particle swarm optimization ».
Robotics, vol. 14, nº 4.
Sotelo, Silvia Castillo, Ouellet-Plamondon, Claudiane, Hof, Lucas et Etxeberria, Miren. 2025. « Design of eco-efficient printable mortar mixes incorporating eggshell residues ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Souilah, Amine et Poirier, Erik.
2025.
« Re-modeling of built asset information to improve and optimize asset management ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 408-424.
Springer.
Sousa Pavani, Gustavo, Sengupta, Dipankar, Freire-Hermelo, Maria, Lavignotte, Antoine, Tremblay, Christine et Lepers, Catherine.
2025.
« Reinforcement learning-based wavelength-dependent power control for WDM systems ».
Optical Fiber Technology, vol. 95.
Souza, José Vinicius S., Vieira, C. B., Cavalcanti, G. D. C. et Cruz, R. M. O..
2025.
« Imbalanced malware classification: an approach based on dynamic classifier selection ».
In IEEE Symposium on Computational Intelligence in Security, Defence and Biometrics Companion (CISDB Companion) (Trondheim, Norway, Mar. 17-20, 2025)
Institute of Electrical and Electronics Engineers Inc.. Souza, Ziani Santana Bandeira De, Fechine, Guilhermino José Macêdo, Sobrinho, Maurício Alves Da Motta, David, Éric et Demarquette, Nicole Raymonde. 2025. « Impact of preparation methods on dielectric and mechanical properties of graphene-epoxy nanocomposites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Soyeux, Dan, Peixoto, Margaux, Tétreault, Patrice, Begon, Mickaël et Hagemeister, Nicola.
2025.
« Multiple acromion lengths and glenoid implant inclinations can result in the same critical shoulder angle with large differences in articular joint loading–a musculoskeletal study ».
JSES International.
Sperling, Ed, Gordon, David et Koch, Bob.
2025.
« Low-cost commercial hydrogen sensor for measuring unburned hydrogen in engine exhaust ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Srhir, Saoussane, Jaegler, Anicia et Montoya-Torres, Jairo R..
2025.
« Exploration de la contribution des technologies de l’industrie 4.0 à la réalisation des objectifs de développement durable : Une étude Delphi ».
Logistique & Management, vol. 33, nº 1.
pp. 26-37.
Sripada, Jagannadh, Thibault, Alexis, Bocher, Philippe, Béland, Jean-François, Vo, Phuong et Irissou, Éric.
2025.
« Influence of pulsed laser ablation parameters on adhesion of cold spray Al 6061 coatings on extruded Al 6061 substrates ».
In Thermal Spray 2025 - Sustainable Innovations in Thermal Spray Technology: Pioneering A Greener Future, Proceedings from the International Thermal Spray Conference and Exposition (Vancouver, BC, Canada, May 05-08, 2025)
pp. 413-419.
ASM International.
Stee, Whitney, Legouhy, Antoine, Guerreri, Michele, Foti, Michael-Christopher, Lina, Jean-Marc, Zhang, Hui et Peigneux, Philippe.
2025.
« Shaping the structural dynamics of motor learning through cueing during sleep ».
Sleep, vol. 48, nº 3.
Stolle, Jacob, Caldera, Ganga, Murphy, Enda, Knox, Paul et Pham Van Bang, Damien.
2025.
« Assessing the dynamic resilience of newly established salt marshes to wave-induced stress over time ».
In Proceedings of the 38th International Conference on Coastal Engineering (ICCE) (Rome, Italy, Sept. 08-14, 2024)
Coll. « Coastal Engineering Proceedings », vol. 38.
St-Onge, David. 2025. « Beyond the stars, onto the stage: Robotics in art and space ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Strugova, Daria, David, Eric et Demarquette, Nicole R.. 2025. « Extensional rheology of PP/PS/MWCNT electrically conductive polymer composites: Impact on electrical properties ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Strugova, Daria, Sultana, S. M. Nourin, Leclair, Jean-Philippe, David, Éric, Demarquette, Nicole R., Paserin, Vladimir et Hof, Lucas A..
2025.
« Polymer blends as a tool to improve mechanical properties and printability of metal-filled polymer filaments for material extrusion additive manufacturing in the context of sustainable manufacturing ».
Journal of Manufacturing Processes, vol. 156, nº Part A.
pp. 611-626.
Su, Zijie, Ren, Mengke, Liu, Yunpu, Pan, Sheng, Li, Zheng et Shen, Changyu.
2025.
« Finite volume neural network (FVNN) with reduced derivative order for incompressible flows ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Sun, Huaihu, Dai, Hongliu, Zhang, Gaixia et Sun, Shuhui.
2025.
« Interface engineering of inorganic solid-state lithium batteries via atomic and molecular layer deposition ».
Infomat, vol. 7, nº 4.
Sun, Mengqian et Wowk, Diane. 2025. « Shell-based adhesive-core equivalent modelling for aluminum honeycomb sandwich panels under compression-after-impact loading ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Sun, Qiao. 2025. « Across the modeling spectrum: Analytical and hybrid approaches to vibrations in mechanical drivetrains ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Suwal, Rajan, Weck, Arnaud et Chen, Kuiying. 2025. « Failure analysis of environmental barrier coatings under adverse operational environment: Multi-physics modeling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Sweidy, Dorian, Teimouri, Kowsar, Maraouch, Ghassan, Saleh, Wael, Evin, Morgane et Kadem, Lyes. 2025. « Experimental investigation of the flow dynamics in a left ventricle during a blunt chest trauma ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Sweidy, Dorian, Wei, Wei, El-Louali, Fedoua, Kadem, Lyes et Evin, Morgane. 2025. « A finite element model of a post-traumatic ventricular septal defect in asymptomatic and symptomatic hearts ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Sylvain, William, Haillot, Didier et Monfet, Danielle. 2025. « Regard sur les performances en agriculture en environnement contrôlé : Indicateurs clés et applications ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).
Szymanski, Maxime, Ghazi, Georges et Botez, Ruxandra M..
2025.
« Enhanced neural network model for aircraft flight dynamics prediction from flight test data- business aircraft application ».
In AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum (Orlando, FL, USA, Jan. 06-10, 2025)
Coll. « AIAA Paper », vol. AIAA 2025-2228.
American Institute of Aeronautics and Astronautics Inc, AIAA.
Tabatabaee, Seyed Mohammad Ehsan, Iordanova, Ivanka et Poirier, Erik.
2025.
« Assessing the impact of innovation in construction: A literature review ».
In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2024, Volume 3: Engineering Management (Niagara Falls, ON, Canada, June 05-07, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 697.
pp. 131-142.
Springer.
Tadja, Didérot, Lehyani, Fatma, Bassetto, Samuel-Jean, Zouari, Alaeddine, Tollenaere, Michel et Wong, Tony.
2025.
« Inclusive tool to assess lean manufacturing maturity and its relationship with the size or location of the company in Greater Montreal, Canada ».
Cogent Engineering, vol. 12, nº 1.
Taeckens, Hugo, Agostini, Arthur, Hachem, Bahe, Degueldre, Loïc, Viens, Sean-Philippe, Castonguay-Henri, Aude, Borduas, Jonathan et Duong, Luc.
2025.
« Evaluation of respiratory mask fitting using finite element analysis numerical simulations and experimental pressure measurements ».
Annals of Biomedical Engineering.
Tageldien, Marwa, Selim, Bassant et Sboui, Lokman.
2025.
« Large language models in intent-based networking: A comprehensive survey across the intent lifecycle ».
In International Telecommunications Conference (ITC-Egypt) (Cairo, Egypt, July 28-31, 2025)
pp. 810-817.
Institute of Electrical and Electronics Engineers Inc..
Taherian, Mohamad H., Shah, Krunal, Perrotton, Alexandre, Wadhwa, Arjun, Cloutier, Sylvain G. et Bolduc, Martin.
2025.
« Laser-based processing for high precision fabrication of printed flexible hybrid electronics circuits ».
In Proceedings of 2025 16th International Conference on Materials and Manufacturing Technologies (Sendai, Japan, Mar. 21-23, 2025)
Coll. « Springer Proceedings in Materials », vol. 92.
pp. 3-12.
Springer.
Talbot, Frédéric, Sylvain, Jean-Daniel, Drolet, Guillaume, Poulin, Annie et Arsenault, Richard.
2025.
« Enhancing physically based and distributed hydrological model calibration through internal state variable constraints ».
Hydrology and Earth System Sciences, vol. 29, nº 22.
pp. 6549-6576.
Talbot, Frédéric, Sylvain, Jean-Daniel, Drolet, Guillaume, Poulin, Annie, Martel, Jean-Luc et Arsenault, Richard.
2025.
« Assessing hydroclimatic impacts of climate change in snowy catchments using a physically based hydrological model ».
Journal of Hydrology: Regional Studies, vol. 59.
Tan, Lisha, Nie, Yunbo et Rahnama, Mohammad.
2025.
« Evaluating train-induced wind power potential in Vancouver’s SkyTrain system: A case study at Burrard Station ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Tanegue, Hermann Boris Djeulezeck, de Paula Ferreira, William, de Assis, Rodrigo Furlan et Brodeur, David.
2025.
« Synergies between virtual commissioning and digital twins ».
[Article de conférence]. Engineering Proceedings, vol. 89, nº 1.
Tardy, Adrien, Rousse, Daniel R., Mungyeko Bisulandu, Baby-Jean Robert et Ilinca, Adrian.
2025.
« Enhancing energy sustainability in remote mining operations through wind and pumped-hydro storage; Application to Raglan Mine, Canada ».
Energies, vol. 18, nº 9.
Tayefi, Masoud, Eesaee, Mostafa, Hassanipour, Meysam, Elkoun, Said, David, Eric et Nguyen-Tri, Phuong.
2025.
« Thermal aging behavior and lifetime prediction of industrial elastomeric compounds based on styrene-butadiene rubber ».
Polymer Engineering and Science.
Tedonchio, Christian Tiaya, Rivest, Louis et Lemieux, Pierre-Olivier.
2025.
« Towards a grasping-oriented categorization of rigid industrial objects to support automatic grasping of 3D CAD models in virtual ergonomics ».
In International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision (Plzen, Czech Republic, May 26-29, 2025)
Coll. « Computer Science Research Notes », vol. 3501.
pp. 225-235.
University of West Bohemia.
Thamsuwan, Ornwipa et Cherik, Katia.
2025.
« Assessment of heart rate variability among plant nursery workers ».
Journal of Agromedicine.
Therriault, Daniel. 2025. « Additive manufacturing of multifunctional composites for aerospace applications: Large-scale, non-planar and multi-process ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Thibault, S. et Bélanger, P..
2025.
« Lite transformer for ultrasonic signal processing ».
In SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025)
Coll. « Proceedings of SPIE », vol. 13438.
SPIE.
Thon, Aurelien, Painchaud-April, Guillaume, Le Duff, Alain et Bélanger, Pierre.
2025.
« U-NET autoencoder for amplitude recovery on binarized Full Matrix Captures ».
NDT and E International, vol. 156.
Tidd, Matthew, Dubay, Rickey et Cao, Hung.
2025.
« A fuzzy inference-based architecture for allocating multi-robot tasks ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Tismer, Alexander et Riedelbauch, Stefan.
2025.
« Current development status of a design framework for hydraulic machines ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Toews, Matthew, Romaguera, Talía Vázquez, Wells, William et Makris, Nikos.
2025.
« Representative scale-invariant characteristics of male and female brains in magnetic resonance images ».
NeuroImage: Reports, vol. 5, nº 3.
Tofigh, S., Askarizadeh, M., Ahmad, M. O., Swamy, M. N. S. et Nguyen, K. K..
2025.
« ACLI: A CNN pruning framework leveraging adjacent convolutional layer interdependence and γ-weakly submodularity ».
IEEE Transactions on Pattern Analysis and Machine Intelligence.
Tofighi, Ali, Zhu, Linbo et Bouzid, Abdel-Hakim.
2025.
« Elastic interaction of bolted flange joints during untightening ».
In ASME 2025 Pressure Vessels & Piping Conference (Montreal, QC, Canada, July 20-25, 2025)
Montreal, QC, Canada : American Society of Mechanical Engineers (ASME).
Tolouei, Ehsan, Hurel, Valentin, Loucif, Abdelhalim, Morin, Jean-Benoit et Jahazi, Mohammad.
2025.
« Influence of the as-quenched state and tempering heating rate on microstructural characteristics of a high-strength steel ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
Tolouei, Ehsan, Hurel, Valentin, Mirzaei, Sajad, Morin, Jean-Benoit et Jahazi, Mohammad.
2025.
« Influence of holding times on the tempering mechanisms of bainitic microstructure ».
Materials Science and Technology.
Tolouei, Ehsan, Saadati, Mohammad, Morin, Jean -Benoit, Garcia-Mateo, Carlos et Jahazi, Mohammad.
2025.
« Influence of bainitic transformation temperature on microstructure evolution during isothermal holding and subsequent cooling ».
Materials Chemistry and Physics, vol. 345.
Tolouei, Ehsan, Saadati, Mohammad, Morin, Jean-Benoit, Garcia-Mateo, Carlos et Jahazi, Mohammad. 2025. « Influence of isothermal bainitic phase transformation temperature on the microstructure and hardness evolution of medium-carbon high strength steel ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Tomiuk, Emma, Miró, Joaquim et Duong, Luc.
2025.
« Evaluation of eye-tracking capabilities in Apple Vision Pro for training in hybrid ventricular septal defect procedures ».
In SPIE Medical Imaging 2025: Image-Guided Procedures, Robotic Interventions, and Modeling (San Diego, CA, USA, Feb. 16-21, 2025)
Coll. « Proceedings of SPIE », vol. 13408.
SPIE. Ton, Jollan, Guérineau, Julia et Zhuldybina, Mariia. 2025. « Méthode améliorant la durabilité des traces imprimées par sérigraphie à plat sur textile grâce à une encapsulation écologique ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).
Tondji, Yvan, Ghazi, Georges et Botez, Ruxandra Mihaela.
2025.
« Predicting lateral dynamics of CRJ700 using multilayer perceptron and support vector regression ».
Journal of Aerospace Information Systems, vol. 22, nº 9.
Tondorf, Diego Fellipe, Pereira, Vanessa Andrade, Hounsell, Marcelo da Silva et Petrillo, Fabio.
2025.
« Towards game design elements on the perception of a fun game: An exergame case study ».
In Entertainment Computing – ICEC 2024 : 23rd IFIP TC 14 International Conference, ICEC 2024, Proceedings (Manaus, Brazil, Sept. 30-Oct. 03, 2024)
Coll. « Lecture notes in computer science », vol. 15192.
pp. 151-162.
Springer.
Tong, Xin, Yang, Changxian, Lin, Minsong, Zhan, Xinxing, Zhou, Lingyun, Xie, Yadian, Tian, Juan, Zhang, Gaixia et Sun, Shuhui.
2025.
« Defect-engineered graphene driven mercury oxidation in coal-fired flue gas via in-situ electro-Fenton catalysis ».
Journal of Environmental Chemical Engineering, vol. 13, nº 5.
Torabi, Hadis, Zarrin, Hadis et Behzadfar, Ehsan.
2025.
« Thermo-rheological analysis of polyhydroxyalkanoates (PHAs): Unravelling thermal degradation mechanism for optimal processing ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Torabipour, Amin, Ethier, Yannic et Karray, Mourad.
2025.
« Use of shear wave velocity to assess Champlain marine clay fabric anisotropy ».
Canadian Geotechnical Journal = Revue Canadienne de Géotechnique, vol. 62.
Tordecilla, Rafael D., Ramirez-Villamil, Angie, Montoya-Torres, Jairo R., Nieto-Garzon, Oscar, Velásquez-Rodríguez, Oscar F. et Prato-Sánchez, Daniel.
2025.
« A sustainable facility location problem with vehicle allocation: An urban logistics case study ».
Journal of the Operational Research Society.
Torres-Tapia, William, Montoya-Torres, Jairo R., Belmokhtar-Berraf, Sana et Ruiz-Meza, José.
2025.
« Solving the combined flexible job shop scheduling and vehicle routing problem with stochastic features ».
Journal of Simulation, vol. 19, nº 1.
pp. 1-23.
Touani Kameni, Francesco, Badr, Sara, Vigouroux, Yohann, Madadian, Elias, Ahmadi, Ali et Lerouge, Sophie.
2025.
« Injectable cryopreservable alginate-gelatin microbeads for pro-angiogenic cell therapy ».
ACS Biomaterials Science and Engineering, vol. 11, nº 11.
pp. 6645-6656.
Touani, Francesco K., Hamouda, Inès, Noiseux, Nicolas, Hoesli, Corinne, Sarkissian, Shant Der et Lerouge, Sophie.
2025.
« Injectable, cryopreservable mesenchymal stromal cell-loaded microbeads for pro-angiogenic therapy: In vitro proof-of-concept ».
Biomedical Materials, vol. 20, nº 1.
Toure, Hamadoun, Ba, Kadiata et Karganroudi, Sasan Sattarpanah.
2025.
« Topology optimization of 3D civil structures for buckling resistance: Case of an aluminum footbridge. ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Toutlini, Nour-Eddine, Beljadid, Abdelaziz et Soulaimani, Azzeddine.
2025.
« A semi-implicit second-order temporal scheme for solving the pressure head-based form of Richards' and advection-dispersion equations ».
Computers and Mathematics with Applications, vol. 187.
pp. 106-131.
Trabelsi, Imen, Mahmoudi, Brahim, Minani, Jean Baptiste, Moha, Naouel et Gueheneuc, Yann-Gaël.
2025.
« A systematic literature review of machine learning approaches for migrating monolithic systems to microservices ».
IEEE Transactions on Software Engineering.
Tran, Mai-Van, Elizalde, Sergio, Champliaud, Henri, Liu, Zhaoheng et Jahazi, Mohammad.
2025.
« Wrinkling prediction in metal spinning through numerical simulation: Impact of loading rate and mass scaling ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Tran, Tuan Minh, Ouammi, Ahmed et Dessaint, Louis A..
2025.
« A near-zero energy smart greenhouse integrated into a microgrid for sustainable energy and microclimate management ».
IEEE Access, vol. 13.
pp. 22243-22258.
Tremblay, Christine, Tabatabaei, Mina, Boertjes, David, Pei, Yinqing et Desrosiers, Christian.
2025.
« Supervised and unsupervised learning for classifying changes in Optical Time Domain Reflectometer traces ».
Journal of Optical Communications and Networking, vol. 17, nº 9.
D118-D124.
Tremblay, Simon, Peng, Zitai, Knox, David et Dumond, Patrick.
2025.
« Testing a low-cost sensor solution for machine condition monitoring ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Trudel-Ferland, M., Ghodbane, A., Yoshida, M., Kouki, A. B., Lina, J. M., Deslandes, D. et Zhuldybina, M..
2025.
« CoulombCompagnon: An intelligent tutoring system for enhancing electromagnetic concepts understanding in engineering education ».
In IEEE Conference on Education and Training in Optics and Photonics (ETOP) (Glasgow, UK, May 19-22, 2025)
Institute of Electrical and Electronics Engineers Inc.. Trudel-Ferland, M., Ghodbane, A., Yoshida, M., Kouki, A., Lina, J.-M., Deslandes, D. et Zhuldybina, M.. 2025. « Transforming electromagnetism education for modern engineers using AI ». Affiche présentée lors de la conférence : CEEA-ACÉG Conference (Montreal, QC, Canada, June 18-21, 2025).
Tsabaris, Christos, Tejera, Alicia, Koomans, Ronald L., Pham van Bang, Damien, Hammouti, Abdelkader, Malliouri, Dimitra, Kapsimalis, Vasilios, Martel, Pablo, Arriola-Velásquez, Ana C., Alexakis, Stylianos, Androulakaki, Effrosyni G., Eleftheriou, Georgios, Kilel, Kennedy, Maramathas, Christos, Patiris, Dionisis L. et Affum, Hannah.
2025.
« Evaluation of coastal sediment dynamics utilizing natural radionuclides and validated in-situ radioanalytical methods at Legrena Beach, Attica Region, Greece ».
Journal of Marine Science and Engineering, vol. 13, nº 7.
Tshibangu, Theophile Mbuyi, Ngoma, Guyh Dituba et Gagnon, Martin.
2025.
« Estimating the fatigue reliability of hydraulic turbine runner blades using frailty models and censored maintenance data ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Tsiolis, Dimitra et Leivadeas, Aris.
2025.
« A smart city assisted Internet of Military Defense Things architecture ».
IEEE Internet of Things Magazine, vol. 8, nº 2.
pp. 18-24. Turcitu, Tatiana, Champagne, Kyle, Le, Andy V. et Fenech, Marianne. 2025. « The role of diamide and glutaraldehyde in modulating red blood cell viscosity and deformability ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Turnier Trottier, William, Collin, Antoine, Krick, Thierry et Brailovski, Vladimir.
2025.
« LPBF-Produced elastomeric lattice structures for personal protection equipment: Mechanical performance versus comfort-related attributes ».
Journal of Manufacturing and Materials Processing, vol. 9, nº 6.
Tusher, Mehide et Ince, Ayhan.
2025.
« Very high cycle fatigue behavior of AlSi7Mg alloy: effects of powder condition in laser powder bed fusion ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Ullah, Inam, Khalil, Irshad, Bai, Xiaoshan, Garg, Sahil, Kaddoum, Georges et Shamim, M..
2025.
« An ensemble-based hybrid model for the detection of attacks in the Internet of Vehicular Things ».
IEEE Transactions on Intelligent Transportation Systems.
Ullah, Irfan, Akinlabi, Esther Titilayo, Kouam, Jules et Songmene, Victor.
2025.
« A comprehensive experimental investigation on the correlation between chip formation, machined surface integrity, and particle emissions during high-speed milling of TC4 titanium alloy ».
International Journal of Advanced Manufacturing Technology, vol. 136, nº 7-8.
pp. 3285-3301.
Ullmann, Gabriel C., Guéhéneuc, Yann-Gaël, Petrillo, Fabio, Anquetil, Nicolas et Politowski, Cristiano.
2025.
« SyDRA: An approach to understand game engine architecture ».
Entertainment Computing, vol. 52.
Uwineza, Laetitia et Wu, Xiao Yu. 2025. « Probabilistic carbon abatement costs of green hydrogen for heavy-duty trucks ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Vagnoni, Elena. 2025. « Fluid-structure interaction in hydraulic machines: Optimizing start-up for longevity ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Vaillant, Mikael, Ferreira, Victor Oliveira, Mainville, Wiebke, Raymond, Vincent, Lamarre, Jean-Michel, Chioua, Moncef et Blais, Bruno. 2025. « Development of a heat transfer surrogate model to predict convective heat transfer coefficient from CFD simulation in a multi-input, multi-output cooling system ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Valdesse Eko'Ola, V. et Nadeau, S..
2025.
« Systematic selection of visual and cognitive assistance equipment: Case of gas turbine assembly in narrow spaces ».
Intelligent control and automation, vol. 16, nº 3.
pp. 80-109.
Valence, Eole, Charonnat, Bastien, Baraër, Michel, Wang, Kaiyuan et McKenzie, Jeffrey M..
2025.
« Investigating emerging boulder impacts on snowpack ablation ».
Cold Regions Science and Technology, vol. 237.
Valinejadshoubi, Mojtaba, Moselhi, Osama, Iordanova, Ivanka, Valdivieso, Fernando, Bagchi, Ashutosh, Corneau-Gauvin, Charles et Kaptué, Armel.
2025.
« A cloud-driven framework for automated BIM quantity takeoff and quality control: Case study insights ».
Buildings, vol. 15, nº 21.
Vallageas, Valentin, Aissaoui, Rachid et Labbe, David R..
2025.
« Proprioception drift in virtual reality: An experiment with an unrealistically long leg ».
In IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops (VRW) (Saint-Malo, France, Mar. 08-12, 2025)
pp. 1486-1487.
Institute of Electrical and Electronics Engineers Inc..
Valtchanov, Hristo, Piche, Nicolas, Brailovski, Vladimir, Byers, Justin, Desrosiers, Catherine et Guibault, Francois.
2025.
« Accurate reconstruction of gas turbine blade geometry using 3D/2D rigid-registration and CT view optimization ».
e-Journal of Nondestructive Testing, vol. 30, nº 2.
Vanackere, Symon, Duc, Kevin Le, Guémas, Malo, Lavallée, Eric, Richard, Gabriel, Samson, Nathalie, Poncet, Sébastien, Fortin-Pellerin, Etienne et Micheau, Philippe. 2025. « Dynamic imaging method of trachea's oscillations in total liquid ventilation: Preliminary findings ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Varailhon, Simon, Aminbeidokhti, Masih, Pedersoli, Marco et Granger, Eric.
2025.
« Source-free domain adaptation for YOLO Object Detection ».
In Computer Vision – ECCV 2024 Workshops, Proceedings, Part XVIII (Milan, Italy, Sept. 29-Oct. 04, 2024)
Coll. « Lecture Notes in Computer Science », vol. 15640.
pp. 218-235.
Springer.
Vargas Hakim, Gustavo A., Osowiechi, David, Noori, Mehrdad, Cheraghalikhani, Milad, Bahri, Ali, Yazdanpanah, Moslem, Ben Ayed, Ismail et Desrosiers, Christian.
2025.
« CLIPArTT: Adaptation of CLIP to new domains at test time ».
In IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) (Tucson, AZ, USA, Feb. 26-mar. 06, 2025)
pp. 7092-7101.
Institute of Electrical and Electronics Engineers Inc..
Varnosfaderani, Shiva, Shaikh, Mohd. Rizwan et Forouzanfar, Mohamad.
2025.
« A comprehensive review of unobtrusive biosensing in intelligent vehicles: Sensors, algorithms, and integration challenges ».
Bioengineering, vol. 12, nº 6.
Vella, Emma, Gojon, Romain, Jardin, Thierry et Moreau, Stéphane. 2025. « Rotor-beam interaction noise of small-size drones ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Vella, Mitchell, Seo, Jaho, Lee, Hanmin et Jang, Ha-Young.
2025.
« Development of a dual attention model for soil type semantic segmentation in construction environments ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Vermeire, Brian et Saghir, Muhammad. 2025. « Leveraging consumer-grade GPUs for efficient high-order computational fluid dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Viggiano, Bianca. 2025. « Predicting particle paths: Lagrangian dynamics in turbulent flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Villeneuve, Guillaume, Leclair, Jean-Philippe, Wuthrich, Rolf et Hof, Lucas A.. 2025. « Precision machining of glass in the submillimeter scale using thermochemically-assisted grinding ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Vlad, Daciana et Warnier, Maxime.
2025.
« Étude de la variation diaphasique de phraséologismes prétéritifs en français et en anglais ».
Langages, vol. 239, nº 3.
pp. 67-84.
Vo, Dat, Urbanic, Jill et Altenhof, William.
2025.
« Tensile properties of ER70S-6 thin wall geometry built by wire arc additive manufacturing ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Voisard, Laurent, De Freitas Serra, Henrique, Politowski, Cristiano, Petrillo, Fabio et Géhéneuc, Yann-Gael.
2025.
« A mapping study of the entity component system pattern ».
In IEEE/ACM 9th International Workshop on Games and Software Engineering (GAS) (Ottawa, ON, Canada, Apr. 29, 2025)
pp. 33-40.
Institute of Electrical and Electronics Engineers Inc.. Voix, Jérémie, Bernier, Antoine et Bonnet, Fabien (inventeurs) 9 septembre 2025. « System and method to perform in-ear noise dosimetry and personal attenuation rating under an electro-acoustic earplug while excluding wearer-induced disturbances and separating exposure sources ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,413,920 B2. [Disponible sur US Patent and Trademark Office (USPTO) https://www.uspto.gov/patents/search/patent-public-search].
Vu, Mathieu, Chouzenoux, Émilie, Ben Ayed, Ismail et Pesquet, Jean-Christophe.
2025.
« Aggregated f-average neural network applied to few-shot class incremental learning ».
Signal Processing, vol. 237.
Vu, Viet-Hung, Chaudhry, Shubham et Shahzadi, Gullnaz.
2025.
« Modeling the process-microstructure-mechanical properties in laser powder bed fusion: Review of data-driven approaches and machine learning strategy for Ti-6Al-4V ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Vu, Viet-Hung, Huynh, Liem, Chaudhry, Shubham et Liu, Zhaoheng.
2025.
« Experimental and numerical modal analysis of a honeycomb panel for aircraft structures application ».
In ASME 2025 Aerospace Structures, Structural Dynamics, and Materials Conference (Houston, TX, USA, May 05-07, 2025)
American Society of Mechanical Engineers (ASME).
Vu, Viet-Hung, Nguyen, Quoc-Cuong et Nguyen, Viet-Hoang.
2025.
« Time series model order estimation in dynamic system and selection of ARMAX optimal model order ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Wadhwa, Arjun, Perrotton, Alexandre, Taherian, Mohamad Hassan, Zirakjou, Abbas, Benavides-Guerrero, Jaime, Gratuze, Mathieu, Vaussenat, Fabrice, Bolduc, Martin et Cloutier, Sylvain G..
2025.
« Flexible screen-printed SiC-based humidity sensors ».
Communications Engineering, vol. 4, nº 1.
Wahid, Mirza Anas, Lahlou, Laaziz et Kara, Nadjia.
2025.
« AeroPowerNet: Fixed-wing UAV power consumption estimation with an AI-driven hybrid deep learning framework ».
In IEEE International Conference on Automation Science and Engineering (Los Angeles, CA, USA, Aug. 17-21, 2025)
pp. 192-197.
IEEE Computer Society.
Wang, A., Pulatsu, B., Andrews, S. et Malomo, D..
2025.
« Breaking boundaries: Discontinuum failure analysis of dry-joint masonry using physics engine models ».
Engineering Structures, vol. 342.
Wang, Anqi, Liu, Jingtian et Wen, John. 2025. « Propagation of combustion and thermal characteristics of magnetic Al@Fe3O4 metal-stable intermetallic composite ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Wang, Dongming et Brinkerhoff, Joshua. 2025. « A parameter optimization of the y-SST transition model for moderate Reynolds number flows over airfoils ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Wang, Jie, Liu, Lei et Kadoch, Michel.
2025.
« Edge computing in wireless multimedia communications: Empowering low-latency and high-quality services ».
In Information Processing and Network Provisioning: Third International Conference, ICIPNP 2024 Spring, Proceedings, Part III (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2418.
pp. 197-211.
Springer.
Wang, Jinglong, Li, Zhan, Sun, Weichao, Al-Haddad, Kamal et Gao, Huijun.
2025.
« Adaptive robust tracking control for precision motion stages via fully actuated system approach ».
In IEEE 34th International Symposium on Industrial Electronics (ISIE) (Toronto, ON, Canada, June 20-23, 2025)
pp. 1-6.
IEEE. Wang, T. et Zhuldybina, M.. 2025. « A flexible electrode patch delivering microcurrent therapy for sinusitis-related headaches ». Affiche présentée lors de la conférence : Advanced Manufacturing and Additive Printed Electronics Canadian Summit (Montreal, QC, Canada, Apr. 14-15, 2025).
Ward, H. B., Beermann, A., Felix, K. M., Narisetti, L., Lewandowski, K. E., Coleman, M., Bouix, S., Holt, D., Öngür, D., Breier, A., Shenton, M. E., Brady Jr., R. O. et Moussa-Tooks, A. B..
2025.
« Grip strength as a marker of resting-state network integrity and well-being in early psychosis ».
American Journal of Psychiatry, vol. 182, nº 9.
pp. 840-849.
Ward, H. B., Beermann, A., Xie, J., Yildiz, G., Felix, K. M., Addington, J., Bearden, C. E., Cadenhead, K., Cannon, T. D., Cornblatt, B., Keshavan, M., Mathalon, D., Perkins, D. O., Seidman, L., Stone, W. S., Tsuang, M. T., Walker, E. F., Woods, S., Coleman, M. J., Bouix, S., Holt, D. J., Öngür, D., Breier, A., Shenton, M. E., Heckers, S., Halko, M. A., Lewandowski, K. E. et Brady, R. O..
2025.
« Robust brain correlates of cognitive performance in psychosis and its prodrome ».
Biological Psychiatry, vol. 97, nº 2.
pp. 139-147.
Waseem, Maryum, Tofighian, Hesam et Tarokh, Ali.
2025.
« Numerical investigation of particle preferential concentration in homogeneous turbulence using DNS ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Wazzeh, Mohamad, Hammoud, Ahmad, Mourad, Azzam, Otrok, Hadi, Talhi, Chamseddine, Dziong, Zbignew, Wang, Chang-Dong et Guizani, Mohsen.
2025.
« Dynamic split federated learning for resource-constrained IoT systems ».
Computer Communications, vol. 242.
Weck, Arnaud. 2025. « Ultrafast laser processing: Developments in texturing and micromachining ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Wei, Henglai, Wu, Jingda, Lv, Chen, Yang, Shichun, Zhang, Hui et Al-Haddad, Kamal.
2025.
« Intelligent EV charging control and management: From microscale battery cell to macroscale grid synergy ».
IEEE Transactions on Intelligent Vehicles, vol. 10, nº 3.
pp. 1693-1713.
Wiegand, Tim L. T., Pankatz, Lara, Arciniega, Hector, Jung, Leonard B., Tuz-Zahra, Fatima, Bouix, Sylvain, Lubeck, Haley, Rojczyk, Philine, Schuhmacher, Luisa S., Buring, Janna, Katz, Douglas I., Tripodis, Yorghos, Pasternak, Ofer, Cetin-Karayumak, Suheyla, Rathi, Yogesh, Adler, Charles H., McKee, Ann C., Balcer, Laura J., Bernick, Charles, Coleman, Michael J., Colasurdo, Elizabeth A., Lin, Alexander P., Peskind, Elaine R., Ashton, Nicholas J., Blennow, Kaj, Zetterberg, Henrik, Alosco, Michael L., Cummings, Jeffrey L., Reiman, Eric M., Stern, Robert A., Shenton, Martha E. et Koerte, Inga K..
2025.
« Diffusion alterations at the gray matter/white matter boundary in traumatic encephalopathy syndrome ».
Journal of Neurotrauma.
Wiens, Travis.
2025.
« Generating realistic engine sounds for simulated construction equipment ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Wigman, Johanna T. W., Ching, Ann Ee, Chung, Yoonho, Eichi, Habiballah Rahimi, Lane, Erlend, Langholm, Carsten, Vaidyam, Aditya, Byun, Andrew Jin Soo, Haidar, Anastasia, Hartmann, Jessica, Nunez, Angela, Dwyer, Dominic, Nasarudin, Adibah Amani, Borders, Owen, Scott, Isabelle, Tamayo, Zailyn, Matneja, Priya, Cho, Kang-Ik, Addington, Jean, Alameda, Luis K., Arango, Celso, Breitborde, Nicholas J. K., Broome, Matthew R., Cadenhead, Kristin S., Calkins, Monica E., Chen, Eric Yu Hai, Choi, Jimmy, Conus, Philippe, Corcoran, Cheryl M., Cornblatt, Barbara A., Diaz-Caneja, Covadonga M., Ellman, Lauren M., Fusar-Poli, Paolo, Gaspar, Pablo A., Gerber, Carla, Glenthøj, Louise Birkedal, Horton, Leslie E., Hui, Christy Lai Ming, Kambeitz, Joseph, Kambeitz-Ilankovic, Lana, Keshavan, Matcheri S., Kim, Sung-Wan, Koutsouleris, Nikolaos, Langbein, Kerstin, Mamah, Daniel, Mathalon, Daniel H., Mittal, Vijay A., Nordentoft, Merete, Pearlson, Godfrey D., Perez, Jesus, Perkins, Diana O., Powers, Albert R., Rogers, Jack, Sabb, Fred W., Schiffman, Jason, Shah, Jai L., Silverstein, Steven M., Smesny, Stefan, Yassin, Walid, Stone, William S., Strauss, Gregory P., Thompson, Judy L., Upthegrove, Rachel, Verma, Swapna, Wang, Jijun, Wolf, Daniel H., Wolff, Phillip, Rowland, Laura M., D’Alfonso, Simon, Pasternak, Ofer, Bouix, Sylvain, McGorry, Patrick D., Kahn, Rene S., Kane, John M., Bearden, Carrie E., Woods, Scott W., Shenton, Martha E., Nelson, Barnaby, Baker, Justin T. et Torous, John.
2025.
« Digital health technologies in the accelerating medicines Partnership® Schizophrenia Program ».
Schizophrenia, vol. 11, nº 1.
Woulaché, Rosalie Laure et Mayer, René. 2025. « Measurement of intra-axis errors of the rotary C-axis of a machine tool considering the effect of the ball erroneous positioning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Wu, An Ni, Kulbay, Merve, Cheng, Phillip M., Cadrin-Chênevert, Alexandre, Létourneau-Guillon, Laurent, Chartrand, Gabriel, Chong, Jaron, Montagnon, Emmanuel, Ben Ayed, Ismail et Tang, An.
2025.
« Deep learning models connecting images and text: A primer for radiologists ».
Radiographics, vol. 45, nº 9.
Wu, M., Yang, S., Gao, Y., Chen, Z., Dong, F., Lei, H., Yang, Y., Chen, N., Omanovic, S., Regier, T., Cui, X., Xia, B. Y., Zhang, G. et Sun, S..
2025.
« Steering CO2 electroreduction pathway via tuning microenvironment of cobalt center in molecular catalysts ».
ACS Nano, vol. 19, nº 36.
pp. 32507-32517.
Wu, Yihang, Chaddad, Ahmad, Desrosiers, Christian, Daqqaq, Tareef et Kateb, Reem.
2025.
« FAA-CLIP: Federated Adversarial Adaptation of CLIP ».
IEEE Internet of Things Journal, vol. 12, nº 12.
pp. 21091-21102. Xia, Yanran et Dumas, Guy. 2025. « Modelling of hydrokinetic turbine farms using simplified numerical approaches ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Xie, Kengyuan, Cai, Guofa, Ning, Ting, He, Jiguang et Kaddoum, Georges.
2025.
« Performance analysis of cooperative wireless-powered NOMA system with energy buffer ».
IEEE Transactions on Green Communications and Networking, vol. 9, nº 3.
pp. 1050-1063. Xie, Siwen, Clancy, Kaitlyn et Onaizah, Onaizah. 2025. « High-resolution automated fabrication of 3D magnetic soft microrobots ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Xing, Harvey et Liu, Yuqing. 2025. « Highly elastic and underwater superoleophobic polypyrrole-coated starch cryogels for water purification ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Xing, Kanglin, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri.
2025.
« Influence of vibration and out-of-plane motion on ballbar measurement accuracy ».
International Journal of Advanced Manufacturing Technology.
Xing, Kanglin, Cianyi, Yannick, Bonev, Ilian A., Champliaud, Henri et Liu, Zhaoheng.
2025.
« Offline circular path error measurement and compensation for robotic machining applications ».
Measurement Science and Technology, vol. 36, nº 10.
Xing, Kanglin, Feng, Miao, Bonev, Ilian A., Champliaud, Henri, Cheriet, Mohamed et Liu, Zhaoheng.
2025.
« XGBoost-based digital twin model for predicting trajectory errors in a hexapod coordinated machining system using positioning accuracy and vibration data ».
Sensors, vol. 25, nº 23.
Xu, Chaochen, Ye, Zhijiang et Egberts, Philip. 2025. « Tuning hysteretic friction behavior of supported atomically thin nanofilm via substrate roughness ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Xu, Hang et Soltanmohammadi, Kianoosh. 2025. « Multi-stable mechanical metamaterials for soft robots with contour recognition ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Xu, Kaige et Liu, Yanzihang. 2025. « Developing wearable biosensors from raw egg white ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Yang, Banglie, Zhu, Linyu, Dai, Cheng, Garg, Sahil et Kaddoum, Georges.
2025.
« An improved reconstruction based multi-attribute contrastive learning for digital twin-enabled industrial system ».
IEEE Internet of Things Journal, vol. 12, nº 4.
pp. 3670-3679.
Yang, Bin, Beguin, Cedric, Causse, Philippe, Feng, Yuwei et Wang, Jihui.
2025.
« Tomographic modeling and internal structure analysis of engineering textiles: A parametric approach ».
Composite Structures, vol. 352.
Yang, Bin, Feng, Yuwei, Béguin, Cédric, Causse, Philippe et Wang, Jihui.
2025.
« Open source tool for Micro-CT aided meso-scale modeling and meshing of complex textile composite structures ».
Composites Science and Technology, vol. 259.
Yang, Chengyuan, Gao, Wei, Deng, Zhaoweng et He, Yuping.
2025.
« Non singular integral terminal sliding mode drive anti-skid control based on fuzzy road recognition ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Yang, Zhen, Cai, Jun et Mélançon, David. 2025. « Leaking inflatables: From defects to functionalities ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Yang, Zhuwen, Xie, Kengyuan, Cai, Guofa, He, Jiguang, Cheng, Guixian et Kaddoum, Georges.
2025.
« Design of a novel time index modulation DCSK wireless-powered system ».
IEEE Transactions on Vehicular Technology, vol. 74, nº 9.
pp. 14747-14792.
Yasami, Amirreza, Tofigh, Mohamadali, Shahbakhti, Mahdi et Koch, Charles Robert.
2025.
« Representative driving cycle construction incorporating road grade transitions using a Markov-chain method ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Yasser, Zyad, Hammoud, Ahmad, Mourad, Azzam, Otrok, Hadi, Dziong, Zbignew et Guizani, Mohsen.
2025.
« Federated learning and evolutionary game model for fog federation formation ».
IEEE Internet of Things Journal, vol. 12, nº 4.
pp. 4183-4196.
Yavari, Mohammad, Mousavi-Saleh, Mohammad et Jabbarzadeh, Armin.
2025.
« A novel hybrid epsilon-constraint and NSGA-II method for bi-objective restructuring hierarchical facility location problem ».
Journal of Advances in Management Research, vol. 22, nº 2.
pp. 183-218.
Yavari, Mohammad, Rahmani, Kavian et Jabbarzadeh, Armin.
2025.
« Coordination contracts for a dual-channel green supply chain with demand disruption ».
Journal of Industrial and Production Engineering.
Yeganeh, Arsalan, Mandegarian, Sepanta, Hojjati, Mehdi et Moghaddar, Hassan. 2025. « Experimental study on pull-out strength of sandwich composite panels with recycled PET foam core ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Yoo, Jinwon, Montaut, Nicola, Piccolini, Matteo, Sciara, Stefania, Franco, Rosario Lo et Morandotti, Roberto.
2025.
« Demonstration of a compiled version of Shor’s algorithm using frequency and time single-photon qudits ».
In Quantum 2.0 in Proceedings Optica Quantum 2.0 Conference and Exhibition (San Francisco, CA, USA, June 01-05, 2025)
Optical Society of America.
Yoo, Jinwon, Sciara, Stefania, Montaut, Nicola, George, Agnes et Morandotti, Roberto.
2025.
« Non-adaptive measurement-based quantum computation using a qudit GHZ state ».
In Quantum 2.0 in Proceedings Optica Quantum 2.0 Conference and Exhibition (San Francisco, CA, USA, June 01-05, 2025)
Optical Society of America. Yousefi, Afrouz, Sadrzadeh, Mohtada et El-Din, Mohamed Gamal. 2025. « Removal of perfluoroalkyl and polyfluoroalkyl substances (PFAS) from water using a hybrid process of membrane separation and anodic oxidation process ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Yousefi, Zahra, Bakar, Fiona C., de Zambotti, Massimiliano et Forouzanfar, Mohamad.
2025.
« DeepArousal-Net: A multi-block recurrent deep learning model for proactive forecasting of non-apneic arousals from multichannel PSG ».
IEEE Transactions on Biomedical Engineering.
Yousfi, Adam, Arnould, Cloé, Da Silva, Brenda Laurindo, De Paula, Nathalia, Megan, Doume Ekale, Iordanova, Ivanka, Motamedi, Ali et Poirier, Érik A..
2025.
« A case-study investigating the integration of ISO 19650 and OpenBIM Principles ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 1: Modeling and Scheduling (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 628.
pp. 372-390.
Springer.
Yousfi, Adam, De Paula, Nathalia, Arnould, Cloe, Da Silva, Brenda Laurindo, Iordanova, Ivanka, Motamedi, Ali et Poirier, Erik A..
2025.
« BIM training through project-based active learning ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024 - Volume 3: Construction Management (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 630.
pp. 346-358.
Springer.
Yousfi, Adam, Poirier, Erik Andrew et Forgues, Daniel.
2025.
« A core ontology for whole life costing in construction projects ».
Buildings, vol. 15, nº 14.
Youssef, Farah, Hallé, Stéphane et D'Avignon, Katherine.
2025.
« Modeling heat loss through sweating: Towards improved heat load prediction from child occupants ».
Energy and Buildings, vol. 342.
Youssef, Nour et D'Avignon, Katherine.
2025.
« Considering child-specific view factors in human thermal balance ».
Science and Technology for the Built Environment, vol. 31, nº 8.
pp. 889-904.
Yu, Hao, Crockett, Benjamin, Montaut, Nicola, Sciara, Stefania, Chemnitz, Mario, Chu, Sai T., Little, Brent E., Moss, David J., Wang, Zhiming, Azaña, José et Morandotti, Roberto.
2025.
« Exploiting nonlocal correlations for dispersion-resilient quantum communications ».
Physical Review Letters, vol. 134, nº 22.
Yu, Hao, Sciara, Stefania, Chemnitz, Mario, Montaut, Nicola, Crockett, Benjamin, Fischer, Bennet, Helsten, Robin, Wetzel, Benjamin, Goebel, Thorsten A., Krämer, Ria G., Little, Brent E., Chu, Sai T., Nolte, Stefan, Wang, Zhiming, Azaña, José, Munro, William J., Moss, David J. et Morandotti, Roberto.
2025.
« Quantum key distribution implemented with d-level time-bin entangled photons ».
Nature Communications, vol. 16, nº 1.
Yu, Jiangtao et He, Yuping.
2025.
« Assessing lateral stability of long combination vehicles using stochastic modeling of varying operating conditions and parameter uncertainties ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Yu, Shudong.
2025.
« Efficient modelling of high Reynolds number incompressible flows in a Q-subdomain by FEM ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Yu, Tiankuo, Yang, Hui, Yao, Qiuyan, Wang, Zhiwei, Zhang, Jie, Vasilakos, Athanasios V. et Cheriet, Mohamed.
2025.
« TSTNet: Temporal semantic transformer-based computing power network for automatic driving in the Internet of Vehicles ».
IEEE Transactions on Artificial Intelligence, vol. 6, nº 10.
pp. 2669-2684.
Yu, Tiankuo, Yang, Hui, Yao, Qiuyan, Zhao, Yang, Gong, Shengye, Zhang, Zepeng, Zhang, Jie et Cheriet, Mohamed.
2025.
« Network for AI: Efficient mapping with fine grain OTN for AI computing services via entropy-coupled incremental learning ».
In 30th OptoElectronics and Communications Conference (OECC) and 2025 International Conference on Photonics in Switching and Computing (PSC) (Sapporo, Japan, June 29-July 03, 2025)
Institute of Electrical and Electronics Engineers Inc..
Yu, Tiankuo, Yang, Hui, Yao, Qiuyan, Zhao, Yang, Zhang, Jie et Cheriet, Mohamed.
2025.
« Multi-dimensional feature-self-organizing mapping-based dynamic path-slot joint protection for fine-grain OTN ».
In 23rd International Conference on Optical Communications and Networks (ICOCN) (Zhangjiajie, China, July 28-31, 2025)
Institute of Electrical and Electronics Engineers Inc..
Yuan, Jiajun, Zhou, Qinghui, Xie, Yidong et Wang, Yanxue.
2025.
« Obstacle avoidance and trajectory tracking coordinated control of multi-axle all-wheel steering vehicles based on the Ackerman principle ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Yuan, Junlin. 2025. « Simulation and modeling of non-canonical wall-bounded turbulent flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Yuan, Xueqi, Yang, Yan, Li, Yanfen et Kadoch, Michel.
2025.
« Latency reduction techniques in real-time wireless multimedia transmission ».
In Information Processing and Network Provisioning: Third International Conference, ICIPNP 2024 Spring, Proceedings, Part III (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2418.
pp. 380-390.
Springer.
Yuan, Z., Guo, S., Hu, X., Tong, J., Hao, J., Kadoch, M. et Yu, P..
2025.
« Storage resource scheduling optimization method for separated data center based on deep reinforcement learning ».
Tongxin Xuebao/Journal on Communications, vol. 46, nº 8.
pp. 1-15. Zacherl, Lorenz. 2025. « Modeling of process-induced deformations in in-situ AFP manufacturing of thermoplastic composites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Zaessinger, Judith, Strugova, Daria, Demarquette, Nicole et Bellehumeur, Celine. 2025. « Rheological investigation of the miscibility of LLDPE-LDPE: Influence of molecular weight, comonomer content and chain branching ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Zaidi, Syed Adeel Haneef, Chaabane, Amin et Khan, Sharfuddin. 2025. « Core technologies for digital twins ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Zanella, Maxime, Fuchs, Clément, Ben Ayed, Ismail et De Vleeschouwer, Christophe.
2025.
« Vocabulary-free few-shot learning for vision-language models ».
In IEEE/CVF Conference on Computer Vision and Pattern Recognition Workshops (CVPRW) (Nashville, TN, USA, June 11-12, 2025)
pp. 149-158.
IEEE Computer Society.
Zaninotto, Ana Luiza, Macruz, Fabiola, Feltrin, Fabricio S., Andrade, Celi S., Leite, Claudia C., Guirado, Vinicius Monteiro de Paula, Paiva, Wellingson S. et Bouix, Sylvain.
2025.
« Longitudinal multimodal magnetic resonance imaging reveals improvement in verbal fluency over time in moderate-to-severe traumatic brain injury ».
Neurotrauma Reports, vol. 6, nº 1.
pp. 600-612. Zanjani, Masoumeh Kazemi. 2025. « Data-driven supply chain and operations management in smart production systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Zeeshan, Muhammad Osama, Pedersoli, Marco, Lameiras Koerich, Alessandro et Granger, Eric.
2025.
« Progressive multi-source domain adaptation for personalized facial expression recognition ».
IEEE Transactions on Affective Computing.
Zein, Mohammad, Kelouwani, Sousso et Hébert, Marie. 2025. « Designing an innovative pressure actuator with an integrated source to customize a portable pump for microfluidic systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Zeinab Aliahmadi, Seyed, Jabbarzadeh, Armin et Hof, Lucas A..
2025.
« A multi-objective optimization approach for sustainable and personalized trip planning: A self-adaptive evolutionary algorithm with case study ».
Expert Systems with Applications, vol. 261.
Zgaren, Ranim, Hosseini, Maryam, Jafari, Reza et Momen, Gelareh.
2025.
« Nanoparticle-free 3D-printed hydrophobic surfaces for ice mitigation applications ».
Molecules, vol. 30, nº 15.
Zhan, Xinxing, Tong, Xin, Ye, Hao, Gao, Zijian, Tian, Juan, Zhuang, Jinliang, Zhang, Gaixia et Sun, Shuhui.
2025.
« Atomically dispersed metal site materials for hydrogen energy utilization: Theoretical and experimental study in fuel cells and water electrolysis ».
DeCarbon, vol. 7.
Zhang, Cheng Cheng, Nguyen, Kim Khoa, Sadreddini, Jale, Purmehdi, Hakimeh et Cheriet, Mohamed.
2025.
« Energy-efficient cloud processing for real-time packet scheduling in open radio access network ».
In IEEE International Conference on Communications (Montreal, QC, Canada, June 08-12, 2025)
pp. 904-909.
Institute of Electrical and Electronics Engineers Inc..
Zhang, Chuanqi, Song, Xuanting, Liang, Shiwei, Dai, Yuxing, Wang, Jun et Al-Haddad, Kamal.
2025.
« UIS ruggedness of Si/SiC hybrid switches ».
In IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) (Beijing, China, Aug. 15-17, 2025)
Institute of Electrical and Electronics Engineers Inc..
Zhang, Diyi, Zhou, Qinghui et Xie, Yidong.
2025.
« A refined traffic light detection method for challenging low visibility scenarios with CS-YOLOv10 algorithm ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Zhang, Gaixia. 2025. « Battery energy device development and system integration ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Zhang, Joseph, Huang, Rui et Suo, Zhigang. 2025. « Inflation of balloons: Entropic elasticity and bifurcation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Zhang, Junfeng. 2025. « Computer modelling and numerical studies of capsule dynamics in fluid flows: The membrane viscosity effects ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Zhang, Longqian (Derek), Liu, Yuxuan, Chadha, Utkarsh et Behdinan, Kamran.
2025.
« Vibrational analysis and optimization of bipolar plates in PEMFCs: A simulation and optimization based study ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Zhang, Tao, Xu, Xiaoyao, Wang, Yifan, Peng, Rongqun et Kadoch, Michel.
2025.
« Optimizing remote medical services with AIoT: Integration of large language models and 6G edge computing ».
In Information Processing and Network Provisioning, Third International Conference, ICIPNP 2024 Spring, Proceedings, Part I (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2416.
pp. 278-294.
Springer.
Zhang, Wei, Huang, Ziheng, Zapata, Miguel Uh, Nguyen, Kim D., Hammouti, Abdelkader, Hurtado Herrera, Mario et Pham Van Bang, Damien.
2025.
« Numerical investigation of asymmetric wave-induced scour around a vertical cylinder ».
In Proceedings of the 12th International Conference on Scour and Erosion (ICSE-12) (Chongqing, China, Nov. 04-07, 2025)
International Society for Soil Mechanics and Geotechnical Engineering. Zhang, Xiaoyang, Yuan, Weixing et Poirel, Dominique. 2025. « Numerical investigation on transverse-gust-induced dynamic stall ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Zhang, Xiaoyun, Wang, Yilong, Ferrari, Giovanni, Amabili, Marco et Cao, Dengqing.
2025.
« Dynamical modeling and response analysis of multi-folded beam structures with nonlinear joints ».
Nonlinear Dynamics.
Zhang, Xinyi, Shamei, Arian, Braga, Alessandro et Bouserhal, Rachel E..
2025.
« The effects of microphone positioning in hearables on voice quality and F0 measurements ».
Journal of the Acoustical Society of America, vol. 158, nº 3.
pp. 2238-2249.
Zhang, Xinyue, Bahri, Ali, Desrosiers, Christian, Liu, Hui et Bao, Fangxun.
2025.
« M2 SegMamba: Mamba-based incomplete multimodal learning for brain tumor segmentation with few samples ».
IEEE Journal of Biomedical and Health Informatics.
Zhang, Zhirong et Kadoch, Michel.
2025.
« Application of ultra-scale antenna technology in 6G networks ».
In Information Processing and Network Provisioning: Third International Conference, ICIPNP 2024 Spring, Proceedings, Part III (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2418.
pp. 212-225.
Springer Science and Business Media Deutschland GmbH. Zhang, Zi Xin et Cao, Changhong. 2025. « Freeform DIW 3D printing of mechanically tunable 2D material-based nanocomposites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).
Zheng, Licheng, Nguyen, Kim Khoa et Cheriet, Mohamed.
2025.
« Joint airborne wireless positioning and communication services with pattern division multiple access (PDMA) ».
IEEE Journal on Selected Areas in Communications.
Zheng, Zijie, Wang, Jun, Song, Xuanting, Zou, Yongzhou, Dai, Yuxing et Al-Haddad, Kamal.
2025.
« Two-step turn-off delay time control for efficiency enhancement in Si/SiC hybrid switch-based inverters ».
In IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) (Beijing, China, Aug. 15-17, 2025)
Institute of Electrical and Electronics Engineers Inc..
Zhou, Haibo, Xiong, Guojiang, Fu, Xiaofan, Wong, Man-Chung, Dessaint, Louis-A. et Al-Haddad, Kamal.
2025.
« Joint optimization of location and topology of multi-terminal soft open point in distribution networks ».
International Journal of Electrical Power and Energy Systems, vol. 169.
Zhou, Long, Shakeri, Fereshteh, Sadraoui, Aymen, Kaaniche, Mounir, Pesquet, Jean-Christophe et Ben Ayed, Ismail.
2025.
« UNEM: UNrolled generalized EM for transductive few-shot learning ».
In IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR) (Nashville, TN, USA, June 10-17, 2025)
pp. 9665-9675.
IEEE Computer Society.
Zhou, Yuetian et Kadoch, Michel.
2025.
« Network coding techniques for efficient wireless multimedia delivery ».
In Information Processing and Network Provisioning, Third International Conference, ICIPNP 2024 Spring, Proceedings, Part I (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2416.
pp. 268-277.
Springer.
Zhou, Yuetian et Kadoch, Michel.
2025.
« Spectrum sharing techniques for wireless multimedia services ».
In Information Processing and Network Provisioning, Third International Conference, ICIPNP 2024 Spring, Proceedings, Part I (Beijing, China, June 14-16, 2024)
Coll. « Communications in Computer and Information Science », vol. 2416.
pp. 190-199.
Springer.
Zhou, Ziyang, Moreau, Stephane et Sanjose, Marlene.
2025.
« Installation effects on airfoil self-noise estimated by direct numerical simulations ».
Journal of Sound and Vibration, vol. 604.
Zhu, Enshen et Yang, Sheng.
2025.
« Advancing human digital twin: A mini review of human modelling ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Zhu, Xiaochen et Timofeev, Evgeny. 2025. « Numerical modelling of diaphragm-rupture-assisted starting of Prandtl-Meyer supersonic air intakes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Zhuldybina, M., Trudel-Ferland, M. et Ghodbane, A.. 2025. « CoulombCompagnon: AI-enhanced learning for mastering electromagnetism ». Affiche présentée lors de la conférence : SALTISE : 14th Annual Conference (Montreal, QC, Canada, June 04-05, 2025).
Ziani, Zouhair, Coulombe, Stéphane, Coudoux, François-Xavier et Corlay, Patrick.
2025.
« Optimization of CRC-based single-bit error correction using a perfect hash table structure ».
In IEEE International Symposium on Circuits and Systems (ISCAS) (London, UK, May 25-28, 2025)
Institute of Electrical and Electronics Engineers Inc..
Zibetti, Elisabetta, Mercader, Alexandra, Duval, Hélène, Levillain, Florent, Rochette, Audrey et St-Onge, David.
2025.
« Shaping expressiveness in robotics: The role of design tools in crafting embodied robot movements ».
In 2025 34th IEEE International Conference on Robot and Human Interactive Communication (RO-MAN) (Eindhoven, Netherlands, Aug. 25-29, 2025)
pp. 755-761.
Institute of Electrical and Electonics Engineers Inc..
Zimmermann, Camila A., Amouzou, Koffi N. et Ung, Bora.
2025.
« Recent advances in PDMS optical waveguides: Properties, fabrication, and applications ».
Advanced Optical Materials, vol. 13, nº 1.
Zimmermann, Camila Aparecida et Ung, Bora. 2025. « PDMS optical waveguides for pressure sensing: A design of experiments approach ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). Zimmermann, Camila et Ung, Bora. 2025. « Tailoring PDMS optical waveguides compression sensitivity for pressure ulcer prevention ». Communication lors de la conférence : Congrès annuel des étudiants chercheurs de l'ÉTS (CAEC-ETS) (Montréal, QC, Canada, Mar. 12, 2025).
Zoghi, Ali, Bilodeau, Émilie, Khaliq, Muhammad Naveed, Kim, Yeowon, Martel, Jean-Luc et Drake, Jennifer.
2025.
« Nature-based solutions for flood mitigation in Canadian urban centers: A review of the state of research and practice ».
Journal of Hydrology: Regional Studies, vol. 60.
Zohourfazeli, Hanieh, Sabaghpourfard, Ali, Chaabane, Amin et Jabbarzadeh, Armin.
2025.
« Optimization-based model of a circular supply chain for coffee waste ».
Supply Chain Analytics, vol. 10.
Zohourfazeli, Mohammadamin, Hosseinzadeh, Pakshid, Madadian, Elias, Badr, Sara, Lerouge, Sophie et Ahmadi, Ali.
2025.
« Development of an on-demand foaming printhead for biofabrication of constructs with heterogeneous porosity ».
Bioprinting, vol. 52.
Zolfagharian, Amirhossein, Abdellatif, Manel, Briand, Lionel C. et Ramesh, S..
2025.
« SMARLA: A Safety Monitoring Approach for Deep Reinforcement Learning Agents ».
IEEE Transactions on Software Engineering, vol. 51, nº 1.
pp. 82-105.
Zongo, Karim, Béland, Laurent Karim et Ouellet-Plamondon, Claudiane.
2025.
« The cost of modelling silicon-based materials with machine learning potential ».
In Advances in Information Technology in Civil and Building Engineering : Proceedings of ICCCBE 2024, Volume 2, Simulation and Automation (Montreal, QC, Canada, Aug. 25-28, 2024)
Coll. « Lecture Notes in Civil Engineering », vol. 629.
pp. 275-282.
Springer.
Zongo, Karim, Sun, Hao, Ouellet-Plamondon, Claudiane, Mousseau, Normand et Béland, Laurent Karim.
2025.
« Amorphous silicon structures generated using a moment tensor potential and the activation relaxation technique nouveau ».
Physical Review B, vol. 111, nº 21.
Zueter, Ahmad, Dalaq, Ahmad et Daqaq, Mohammed. 2025. « Passive ventilation via origami-driven stack effect in cold regions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025). |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau