| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Documents publiés en 2006Nombre de documents archivés : 772. Article publié dans une revue, révisé par les pairs
Abi-Saad, Georges et Bauer, Dominique Bernard.
2006.
« Analytical approach for shear lag in welded tension members ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 33, nº 4.
pp. 384-394.
Abran, Alain.
2006.
« Estimation models for software maintenance based on functional size ».
Journal of Software Technology , vol. 9, nº 3.
pp. 18-25.
Abran, Alain, Al-Qutaish, Rafa E. et Cuadrado-Gallego, Juan J..
2006.
« Analysis of the ISO 9126 on software product quality evaluation from the metrology and ISO 15939 perspectives ».
WSEAS Transactions on Computers, vol. 5, nº 11.
pp. 2778-2786.
Abran, Alain et Buglione, L..
2006.
« ISBSG software project repository and ISO 9126 : an opportunity for quality benchmarking ».
European Journal for the Informatics Professional, vol. 7, nº 1.
pp. 46-52.
Abran, Alain et Meridji, Kenza.
2006.
« Analysis of software engineering from an engineering perspective ».
European Journal for the Informatics Professional, vol. 7, nº 1.
pp. 5-19.
Abu, Talib, Ormandjieva, Olga, Abran, Alain, Khelifi, Adel et Buglione, Luigi.
2006.
« Scenario-based black-box testing in COSMIC-FFP: a case study ».
[Article de conférence]. Journal of the American Society for Quality, vol. 8, nº 3.
pp. 22-33.
Aguirre, C. M., Auvray, S., Pigeon, S., Izquierdo, R., Desjardins, P. et Martel, R..
2006.
« Carbon nanotube sheets as electrodes in organic light-emitting diodes ».
Applied Physics Letters, vol. 88, nº 18.
Akbalik, A., Larbi, R. et Penz, B..
2006.
« Dynamic programming approach for a capacitated lot sizing problem coupled with transportation activities ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 12, nº 3.
pp. 179-184.
Alinot, Cédric et Masson, Christian.
2006.
« k-e model for the atmospheric boundary layer under various thermal stratifications ».
Journal of Solar Energy Engineering, vol. 127, nº 4.
pp. 438-443.
Allaoui, Hamid et Artiba, Abdelhakim.
2006.
« Scheduling two-stage hybrid flow shop with availability constraints ».
Computers and Operations Research, vol. 33, nº 5.
pp. 1399-1419.
Allaoui, Hamid, Lamouri, Samir et Artiba, Abdelhakim.
2006.
« Using Johnson's algorithm to approximate some flow shop scheduling problems with unavailability periods ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 39, nº 3.
pp. 45-50.
April, Alain et Champagne, Roger.
2006.
« What is the service level of your CMMS supplier? ».
Maintenance & Asset Management, vol. 21, nº 1.
pp. 25-29.
April, Alain et Laporte, Claude Y..
2006.
« What is the service level of your CMMS supplier (Part 2) ».
Maintenance & Asset Management , vol. 21, nº 2.
pp. 34-38.
Aquino, Janayna et Melhado, Silvio.
2006.
« Estudos de caso sobre desenvolvimento e utilização de projetos para produção de vedações verticais ».
Gestão & Tecnologia de Projetos, vol. 1, nº 1.
pp. 76-103.
Arockiasamy, Madasamy, Chaallal, Omar et Limpeteeprakarn, Terdkiat.
2006.
« Full-scale field tests on flexible pipes under live load application ».
Journal of Performance of Constructed Facilities, vol. 20, nº 1.
pp. 21-27.
Azzouz, A., Nistor, D., Miron, D., Ursu, A. V., Sajin, T., Monette, Frédéric, Niquette, Patrick et Hausler, Robert.
2006.
« Assessment of acid-base strength distribution of ion-exchanged montmorillonites through NH3 and CO2-TPD measurements ».
Thermochimica Acta, vol. 449, nº 1-2.
pp. 27-34.
Balout, Bahaa, Songmene, Victor et Masounave, Jacques.
2006.
« Usinabilité d'alliages légers et des composites lors du perçage à sec ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 30, nº 3.
pp. 329-343.
Barbeau, Michel et Robert, Jean-Marc.
2006.
« Rogue-base station detection in WiMax/802.16 wireless access networks ».
Annals of Telecommunications = Annales des Télécommunications, vol. 61, nº 11-12.
pp. 1300-1313.
Beaugendre, Héloise, Morency, François et Habashi, Wagdi G..
2006.
« Development of a second generation In-Flight Icing simulation code ».
Journal of Fluids Engineering, vol. 128, nº 2.
pp. 378-387.
Ben Ayed, Ismail, Hennane, Nacera et Mitiche, Amar.
2006.
« Unsupervised variational image segmentation/classification using a weibull observation model ».
IEEE Transactions on Image Processing, vol. 15, nº 11.
pp. 3431-3439.
Ben Ayed, Ismail, Mitiche, Amar et Belhadj, Ziad.
2006.
« Polarimetric image segmentation via maximum-likelihood approximation and efficient multiphase level-sets ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 28, nº 9.
pp. 1493-1500.
Ben Azouz, Zouhour, Rioux, Marc, Shu, Chang et Lepage, Richard.
2006.
« Characterizing human shape variation using 3D anthropometric data ».
Visual Computer, vol. 22, nº 5.
pp. 302-314.
Ben Braiek, E., Cheriet, Mohamed et Doré, V..
2006.
« Conception d’une nouvelle famille de noyaux séparables à support compact appliqués à l’extraction des données visuelles manuscrites ».
Traitement du Signal, vol. 23, nº 1.
pp. 25-40.
Benner, Michael W., Sjolander, S. A. et Moustapha, S. H..
2006.
« An empirical prediction method for secondary losses in turbines - Part I: A new loss breakdown scheme and penetration depth correlation ».
Journal of Turbomachinery, vol. 128, nº 2.
pp. 273-280.
Benner, Michael W., Sjolander, S. A. et Moustapha, S. H..
2006.
« An empirical prediction method for secondary losses in turbines - Part II: A new secondary loss correlation ».
Journal of Turbomachinery, vol. 128, nº 2.
pp. 281-291.
Bennis, Saad et Crobeddu, Éric.
2006.
« Suivi et validation des mesures pour un déversoir d'orage latéral à seuil court ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 33, nº 3.
pp. 326-335.
Biskri, Djallel Eddine et Botez, Ruxandra .
2006.
« Aerodynamic forces based on an error analytical formulation for aeroservoelasticity studies on an F/A-18 aircraft ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 220, nº 5.
pp. 421-428.
Biskri, Djallel Eddine, Botez, Ruxandra, Stathopoulos, Nicholas, Therien, Sylvain, Rathe, Alexandre et Dickinson, Martin.
2006.
« New mixed method for unsteady aerodynamic force approximations for aeroservoelasticity studies ».
Journal of Aircraft, vol. 43, nº 5.
pp. 1538-1542.
Bitsuamlak, G.T., Stathopoulos, T. et Bédard, Claude.
2006.
« Effects of upstream two-dimensional hills on design wind loads: a computational approach ».
Wind and Structures, vol. 9, nº 1.
pp. 37-58.
Bodo, Ruben, Hausler, Robert et Azzouz, Abdelkrim.
2006.
« Approche multicritère pour la sélection de plantes aquatiques en vue d'une exploitation rationnelle ».
Revue des Sciences de l'Eau, vol. 19, nº 3.
pp. 181-197.
Boivin, Karine, Hagemeister, Nicola, Turcot, Katia, Aissaoui, Rachid, Prince, François et De Guise, Jacques A..
2006.
« Influence of a 3D knee movement analyzer on gait patterns of knee osteoarthritis patients ».
Gait and Posture, vol. 24, nº supp. 2.
S164-S165.
Bonev, Ilian et Gosselin, Clement M..
2006.
« Analytical determination of the workspace of symmetrical spherical parallel mechanisms ».
IEEE Transactions on Robotics, vol. 22, nº 5.
pp. 1011-1017.
Bouikni, Nadjib, Desrochers, Alain et Rivest, Louis.
2006.
« A product feature evolution validation model for engineering change management ».
Journal of Computing and Information Science in Engineering, vol. 6, nº 2.
pp. 188-195.
Bousselham, Abdelhak et Chaallal, Omar.
2006.
« Behavior of reinforced concrete T-beams strengthened in shear with carbon fiber-reinforced polymer : An experimental study ».
ACI Structural Journal, vol. 103, nº 3.
pp. 339-347.
Bousselham, Abdelhak et Chaallal, Omar.
2006.
« Effect of transverse steel and shear span on the performance of RC beams strengthened in shear with CFRP ».
Composites Part B: Engineering, vol. 37, nº 1.
pp. 37-46.
Bouzid, A., Diany, M. et Derenne, M..
2006.
« Determination of gasket effective width for the ASME proposed flange design rules ».
Welding Research Council Bulletin, nº 515.
pp. 1-43.
Brailovski, Vladimir, Prokoshkin, S. D., Khmelevskaya, I. Yu, Inaekyan, K. E., Demers, V., Bastarache, E., Dobatkin, S. V. et Tatyanin, E. V..
2006.
« Interrelations between the properties and structure of thermomechanically-treated equiatomic Ti-Ni alloy ».
Materials Science and Engineering: A, vol. 438-440.
pp. 597-601.
Brailovski, Vladimir, Prokoshkin, Sergui D., Khmelevskaya, Irina Yu., Inaekyan, Karine E., Demers, Vincent, Dobatkin, Sergui V. et Tatyanin, Evgeny V..
2006.
« Structure and properties of the Ti–50.0 at%Ni alloy after strain hardening and nanocrystallizing thermomechanical processing ».
Materials Transactions, vol. 47, nº 3.
pp. 795-804.
Cao, X., Jahazi, M., Immarigeon, J. P. et Wallace, W..
2006.
« A review of laser welding techniques for magnesium alloys ».
Journal of Materials Processing Technology, vol. 171, nº 2.
pp. 188-204.
Carastan, Danilo Justino et Demarquette, Nicole Raymonde.
2006.
« Microstructure of nanocomposites of styrenic polymers ».
Macromolecular Symposia, vol. 233, nº 1.
pp. 152-160.
Carvalho, Alexsander Tressino de, Carvalho, Rodrigo Amorim Motta, Silva, Maria Lúcia Pereira da et Demarquette, Nicole Raymond.
2006.
« Hydrophobic plasma polymerized hexamethyldisilazane thin films: characterization and uses ».
Materials Research, vol. 9.
pp. 9-13.
Carvalho, Rodrigo Amorim Motta, Carvalho, Alexsander Tressino de, Silva, Maria Lúcia Pereira da et Demarquette, Nicole Raymond.
2006.
« Production of selective membranes using plasma deposited nanochanneled thin films ».
Materials Research, vol. 9.
pp. 381-386.
Chaallal, Omar, Hassan, Munzer et Leblanc, Michel.
2006.
« Circular columns confined with FRP: Experimental versus predictions of models and guidelines ».
Journal of Composites for Construction, vol. 10, nº 1.
pp. 4-12.
Chaallal, Omar, Shahawy, Mohsen et Hassan, Munzer.
2006.
« CFRP repair and strengthening of structurally deficient piles: Design issues and field application ».
Journal of Composites for Construction, vol. 10, nº 1.
pp. 26-34.
Chaallal, Omar, Sieprawski, Guillaume et Guizani, Lotfi.
2006.
« Fatigue performance of modular expansion joints for bridges ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 33, nº 8.
pp. 921-932.
Champain, S., Benchikh, K., Nogier, A., Mazel, C., de Guise, Jacques A. et Skalli, W..
2006.
« Validation of new clinical quantitative analysis software applicable in spine orthopaedic studies ».
European Spine Journal, vol. 15, nº 6.
pp. 982-991.
Charbeneau, Randall J., Henderson, Andrew D. et Sherman, Lee C..
2006.
« Hydraulic performance curves for highway culverts ».
Journal of Hydraulic Engineering, vol. 132, nº 5.
pp. 474-481.
Cheriet, Mohamed et Doré, Vincent.
2006.
« Amincissement-sans-segmentation et rehaussement des images de niveau de gris par un filtre de chocs utilisant des champs de diffusion ».
Traitement du Signal, vol. 23, nº 1.
pp. 79-94.
Daunizeau, Jean, Mattout, Jérémie, Clonda, Diego, Goulard, Bermard, Benali, Habib et Lina, Jean Marc.
2006.
« Bayesian spatio-temporal approach for EEG source reconstruction: Conciliating ECD and distributed models ».
IEEE Transactions on Biomedical Engineering, vol. 53, nº 3.
pp. 503-516.
Debbabi, M., Saleh, M., Talhi, C. et Zhioua, S..
2006.
« Vulnerability analysis of J2ME CLDC security ».
The US DoD information assurance newsletter, vol. 9, nº 2.
pp. 18-24.
Debbabi, Mourad, Gherbi, Abdelouahed, Mourad, Azzam et Yahyaoui, Hamdi.
2006.
« A selective dynamic compiler for embedded Java virtual machines targeting ARM processors ».
Science of Computer Programming, vol. 59, nº 1-2.
pp. 38-63.
Debbabi, Mourad, Saleh, Mohamend, Talhi, Chamseddine et Zhioua, Sami.
2006.
« Security evaluation of J2ME CLDC embedded java platform ».
Journal of Object Technology, vol. 5, nº 2.
pp. 125-154.
Demers, V., Brailovski, Vladimir, Prokoshkin, S., Inaekyan, K., Bastarash, E., Khmelevskaya, I. et Dobatkin, S..
2006.
« Functional properties of nanostructured Ti-50.0 at % Ni alloys ».
Journal of ASTM International, vol. 3, nº 6.
Deniger, Frédéric et Laporte, Claude Y..
2006.
« Développement et implantation d'un cadre de gestion de projet dans une société de postproduction cinématographique et télévisuelle ».
Génie Logiciel, nº 77.
pp. 44-53.
Deslandes, Dominic et Ke, Wu.
2006.
« Accurate modeling, wave mechanisms, and design considerations of a substrate integrated waveguide ».
IEEE Transactions on Microwave Theory and Techniques, vol. 54, nº 6.
pp. 2516-2526.
Desroches, Guillaume, Aissaoui, Rachid et Bourbonnais, Daniel.
2006.
« Effect of system tilt and seat-to-backrest angles on load sustained by shoulder during wheelchair propulsion ».
Journal of Rehabilitation Research and Development, vol. 43, nº 7.
pp. 871-882.
Dessaint, Louis-A. et Al Haddad, Kamal.
2006.
« Modeling and simulation of electric machines, converters and systems ».
[Autre]. Mathematics and Computers in Simulation, vol. 71, nº 4-6.
p. 255.
Dessaint, Louis-A., Okou, F., Bazanella, A. S. et Damm, G..
2006.
« Discussion on: "robust adaptative transient stabilization of a synchronous generator with parameter uncertainty" ».
European Journal of Control, vol. 12, nº 2.
pp. 149-155.
Dinu, Alin Dorian, Botez, Ruxandra Mihaela et Cotoi, Iulian.
2006.
« Chebyshev polynomials for unsteady aerodynamic calculations in aeroservoelasticity ».
Journal of Aircraft, vol. 43, nº 1.
pp. 165-171.
Djeffal, Samir et Bourque, Pierre.
2006.
« Le développement des ontologies : un tour d'horizon ».
Génie Logiciel, nº 78.
pp. 36-46.
Duong, Luc, Cheriet, Farida et Labelle, Hubert.
2006.
« Three-dimensional classification of spinal deformities using fuzzy clustering ».
Spine, vol. 31, nº 8.
pp. 923-930.
Fabricio, Marcio Minto et Melhado, Silvio Burratino.
2006.
« Analysis of integrated product development process in building projects: case studies ».
Product: Management & Development, vol. 4, nº 1.
pp. 13-18.
Fataicha, Y., Cheriet, Mohamed, Nie, J.Y. et Suen, C.Y..
2006.
« Retrieving poorly degraded OCR documents ».
International Journal on Document Analysis and Recognition, vol. 8, nº 1.
pp. 15-26.
Favre, J., Aissaoui, R., Jolles, B., Luthi, F., de Guise, J. et Aminian, K..
2006.
« Ambulatory inertial system for 3D knee joint angles measurement during gait ».
[Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 39, nº S1.
S74.
Fimbel, Éric, Le, Van Ngan et Arguin, Martin.
2006.
« Speed-accuracy trade-offs in myocontrol ».
Human Movement Science, vol. 25, nº 2.
pp. 165-180.
Fortin, Guy, Laforte, Jean-Louis et Ilinca, Adrian.
2006.
« Heat and mass transfer during ice accretion on aircraft wings with an improved roughness model ».
International Journal of Thermal Sciences, vol. 45, nº 6.
pp. 595-606.
Francis, Adel et Miresco, Edmond T..
2006.
« A chronographic method for construction project planning ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 33, nº 12.
pp. 1547-1557.
Francis, Adel et Miresco, Edmond T..
2006.
« Discussion of "Critical path method with multiple calendars" by Kyunghwan Kim and Jesus M. de la Garza ».
Journal of Construction Engineering and Management, vol. 132, nº 5.
pp. 542-543.
François, Véronique et Aboutorabi, Seyed Sadreddin.
2006.
« A mechanical criterion for the design of readily cleavable microstructured optical fibers ».
Optics Express, vol. 14, nº 16.
pp. 7312-7318.
Gabréa, Marcel.
2006.
« Single microphone noise canceller based on a robust adaptive kalman filter ».
Scientific Bulletin of the Politehnica University of Timisoara = Transactions on Electronics and Communications, vol. 51, nº 2.
pp. 158-162.
Garcia, Sixto, Saad, Maarouf et Akhrif, Ouassima.
2006.
« Nonlinear tuning of aircraft controllers using genetic global optimization: A new periodic mutation operator ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 31, nº 3.
pp. 149-158.
Genisson, Jean-Luc, Lerouge, Sophie et Cloutier, Guy.
2006.
« Assessment by transient elastography of the viscoelastic properties of blood during clotting ».
Ultrasound in Medicine and Biology, vol. 32, nº 10.
pp. 1529-1537.
Gharbi, Ali, Kenné, Jean-Pierre et Hajji, A..
2006.
« Operational level-based policies in production rate control of unreliable manufacturing systems with setups ».
International Journal of Production Research, vol. 44, nº 3.
pp. 545-567.
Gherbi, Abdelouahed et Khendek, Ferhat.
2006.
« UML profiles for real-time systems and their applications ».
Journal of Object Technology, vol. 5, nº 4.
pp. 149-169.
Gravel, Pierre, Despres, Philippe, Beaudoin, Gilles et de Guise, Jacques A..
2006.
« Resolution enhancement in digital x-ray imaging ».
Physics in Medicine and Biology, vol. 51, nº 10.
pp. 2415-2439.
Grigorie, Lucian Teodor, Hiliuta, Adrian, Botez, Ruxandra M. et Aron, Ioan.
2006.
« Numerical and experimental study of an algorithm of attitude for a strap-down inertial system ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 30, nº 3.
pp. 429-442.
Grova, Christophe, Daunizeau, J., Lina, Jean Marc, Benar, C. G., Benali, H. et Gotman, J..
2006.
« Evaluation of EEG localization methods using realistic simulations of interictal spikes ».
Neurolmage, vol. 29, nº 3.
pp. 734-753.
Guilbault, Raynald.
2006.
« Tooth influence on flexural and torsional flexibility, and model tooth number prediction for optimum dynamic simulation of wide-faced spur gears ».
Journal of Mechanical Design, vol. 128, nº 3.
pp. 626-633.
Guilbault, Raynald, Gosselin, Claude et Cloutier, Louis.
2006.
« Helical gears, effects of tooth deviations and tooth modifications on load sharing and fillet stresses ».
Journal of Mechanical Design, vol. 128, nº 2.
pp. 444-456.
Haidar, H., Bouix, S., Levitt, J. J., McCarley, R. W., Shenton, M. E. et Soul, J. S..
2006.
« Characterizing the shape of anatomical structures with poisson's equation ».
IEEE Transactions on Medical Imaging, vol. 25, nº 10.
pp. 1249-1257.
Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre.
2006.
« Joint production and supply control in three levels flexible manufacturing systems ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 39, nº 3.
pp. 149-154.
Hefford, S. W., Smith, R. S. et Samson, C..
2006.
« Quantifying the effects that changes in transmitter-receiver geometry have on the capability of an airborne electromagnetic survey system to detect good conductors ».
Exploration and Mining Geology, vol. 15, nº 1-2.
pp. 43-52.
Humbert, Michel, Germain, L., Gey, N., Bocher, Philippe et Jahazi, M..
2006.
« Study of the variant selection in sharp textured regions of bimodal IMI 834 billet ».
Materials Science and Engineering: A, vol. 430, nº 1-2.
pp. 157-164.
Isalgue, A., Lovey, F.C., Terriault, Patrick, Martorell, F., Torra, R.M. et Torra, V..
2006.
« SMA for dampers in civil engineering ».
Materials Transactions, vol. 47, nº 3.
pp. 682-690.
Issaoun, Ammar, Kouki, Ammar B. et Ghannouchi, Fadhel M..
2006.
« A simple large signal model for III-V HBT devices exceeding VBIC performances ».
AEU - International Journal of Electronics and Communications, vol. 60, nº 5.
pp. 367-375.
Jalilian, F., Jahazi, M. et Drew, R. A. L..
2006.
« Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni-Si-B filler metal ».
Materials Science and Engineering: A, vol. 423, nº 1-2.
pp. 269-281.
Jazouli, Said, Luo, Wenbo, Brémand, Fabrice et Vu-Khanh, Toan.
2006.
« Nonlinear creep behavior of viscoelastic polycarbonate ».
Journal of Materials Science, vol. 41, nº 2.
pp. 531-536.
Kaddouri, A., Blais, S., Ghribi, A. et Akhrif, Ouassima.
2006.
« NLSOFT: an interactive graphical software for designing nonlinear controllers ».
[Article de conférence]. Mathematics and Computers in Simulation, vol. 71, nº 4-6.
pp. 377-384.
Kanaan, Hadi Youssef, Al Haddad, Kamal et Fnaiech, Farhat.
2006.
« A study on the effects of the neutral inductor on the modeling and performance of a four-wire three-phase/switch/level fixed-frequency rectifier ».
[Article de conférence]. Mathematics and Computers in Simulation, vol. 71, nº 4-6.
pp. 487-498.
Kandil, Nahi, Wamkeue, René, Saad, Maarouf et Georges, Semaan.
2006.
« An efficient approach for short term load forecasting using artificial neural networks ».
International Journal of Electrical Power and Energy Systems, vol. 28, nº 8.
pp. 525-530.
Kerboua, Y., Lakis, A. A., Thomas, Marc, Marcouiller, L. et Toorani, M. H..
2006.
« Dynamic analysis of coupled-fluid structure systems ».
WSEAS Transactions on Applied and Theoretical Mechanics, vol. 1, nº 2.
pp. 265-274.
Khayati, Karim, Bigras, Pascal et Dessaint, Louis-A..
2006.
« A multistage position/force control for constrained robotic systems with friction: Joint-space decomposition, linearization, and multiobjective observer/controller synthesis using LMI formalism ».
IEEE Transactions on Industrial Electronics, vol. 53, nº 5.
pp. 1698-1712.
Khodabandeh, A. R., Jahazi, M., Yue, S. et Aghdashi, S. T..
2006.
« The determination of optimum forging conditions for the production of high strength-high impact toughness automotive parts ».
Materials and Manufacturing Processes, vol. 21, nº 1.
pp. 105-110.
Kincic, S., Ooi, B. T., McGillis, D. et Chandra, Ambrish.
2006.
« Voltage support of radial transmission lines by var compensation at distribution buses ».
IEE Proceedings - Generation, Transmission and Distribution, vol. 153, nº 1.
pp. 51-58.
Koo, M. S., Dickey, C. C., Park, H. J., Kubicki, M., Na, Y. J., Bouix, S., Pohl, K. M., Levitt, J. J., Nakamura, M., Shenton, M. E. et McCarley, R. W..
2006.
« Smaller neocortical gray matter and larger sulcal cerebrospinal fluid volumes in neuroleptic-naive women with schizotypal personality disorder ».
Archives of General Psychiatry, vol. 63, nº 10.
pp. 1090-1100.
Lagacé, Pierre Jean, Vuong, Mai Hoa, Lefebvre, Mario et Fortin, Jacques.
2006.
« Multilayer resistivity interpretation and error estimation using electrostatic images ».
IEEE Transactions on Power Delivery, vol. 21 , nº 4.
pp. 1954-1960.
Lalonde, N. M., Dansereau, Jean, Pauget, Pierre, Cinquin, Philippe et Aissaoui, Rachid.
2006.
« Accessing the influence of repositioning on the pelvis' 3-D orientation in wheelchair users ».
IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 14, nº 1.
pp. 76-82.
Lan, André, Leboeuf, Denis, Chaallal, Omar et Daigle, Renaud.
2006.
« Validation of shoring made of HDPE pipe or CGS pipe normally used for culverts and sewers ».
Practice Periodical on Structural Design and Construction, vol. 11, nº 1.
pp. 39-49.
Landry, Jacques -André, Da Costa, Luis et Bernier, Thomas.
2006.
« Discriminant feature selection by genetic programming: towards a domain independent multi-class object detection system ».
Journal of Systemics, Cybernetics and Informatics, vol. 3, nº 1.
pp. 76-81.
Landry, René Jr., Boutin, Pierre et Constantinescu, Aurelian.
2006.
« New anti-jamming technique for GPS and GALILEO receivers using adaptive FADP filter ».
Digital Signal Processing, vol. 16, nº 3.
pp. 255-274.
Langar, R., Bouabdallah, N. et Tohme, S..
2006.
« On the analysis of mobility mechanisms in micro mobile MPLS access networks ».
Journal of Communications, vol. 1, nº 6.
pp. 18-27.
Langar, Rami, Tohme, Samir et Bouabdallah, Nizar.
2006.
« Mobility management support and performance analysis for wireless MPLS networks ».
International Journal of Network Management, vol. 16, nº 4.
pp. 279-294.
Lapalme, Ervig, Lina, Jean-Marc et Mattout, Jérémie.
2006.
« Data-driven parceling and entropic inference in MEG ».
NeuroImage, vol. 30, nº 1.
pp. 160-171.
Lapalme, James, Aboulhamid, El Mostapha et Nicolescu, Gabriela.
2006.
« A new efficient EDA tool design methodology ».
ACM Transactions on Embedded Computing Systems, vol. 5, nº 2.
pp. 408-430.
Laporte, Catherine et Arbel, Tal.
2006.
« Efficient discriminant viewpoint selection for active Bayesian recognition ».
International Journal of Computer Vision, vol. 68, nº 3.
pp. 267-287.
Laporte, Claude Y., April, Alain et Renault, Alain.
2006.
« The application of international software engineering standards in very small enterprises ».
IEEE Canadian Review = Revue Canadienne de l'IEEE, nº 53.
pp. 14-15.
Laporte, Claude Y., Desharnais, Jean-Marc, Abou El Fatah, Mohamed Mounir, Bamba, Jean-Claude, Renault, Alain, Alexandre, Simon et Habra, Naji.
2006.
« L'amélioration des processus logiciels pour de petites entreprises : nos expériences avec les micro-évaluations ».
Génie Logiciel, nº 79.
pp. 2-9.
Lavallée, Stéphane, Brissette, François, Leconte, Robert et Larouche, Bruno.
2006.
« Monitoring snow-cover depletion by coupling satellite imagery with a distributed snowmelt model ».
Journal of Water Resources Planning and Management, vol. 132, nº 2.
pp. 71-78.
Lavoie, Frédéric, Laplante, Martin, Parent, Gérald, Duval, Nicolas, Doré, Sylvie et de Guise, Jacques A..
2006.
« Gesture standardization increases the reproducibility of 3D kinematic measurements of the knee joint ».
Clinical Biomechanics, vol. 21, nº 5.
pp. 502-507.
Le Boudec, Brice, Saad, Maarouf et Nerguizian, Vahé.
2006.
« Modeling and adaptive control of redundant robots ».
[Article de conférence]. Mathematics and Computers in Simulation, vol. 71, nº 4-6.
pp. 395-403.
Leconte, Robert, Peters, Daniel, Pietroniro, Alain et Prowse, Terry.
2006.
« Modelling climate change impacts in the peace and athabasca catchment and delta: II - variations in flow and water levels with varying winter severity ».
Hydrological Processes, vol. 20, nº 19.
pp. 4215-4230.
Lerouge, Sophie, Raymond, Jean, Schloesser, Klaus, Gaboury, Louis et Soulez, Gilles.
2006.
« Effect of radioactivity on stent-graft incorporation after endovascular treatment of aneurysms: an animal study ».
Journal of Biomedical Materials Research - Part A, vol. 79A, nº 3.
pp. 731-739.
Levasseur, A., Tétreault, P., de Guise, Jacques A., Nuño, Natalia et Hagemeister, Nicola.
2006.
« Comparison between geometric and functional method for the estimation of the glenohumeral rotation center ».
[Résumé d'une communication à une conférence]. Journal of biomechanics, vol. 39, nº supp. 1.
s83.
Levasseur, A., Tétreault, P., de Guise, Jacques A., Nuño, Natalia et Hagemeister, Nicola.
2006.
« Improvement of the ISB joint coordinate system to describe shoulder joint kinematics ».
[Résumé d'une communication à une conférence]. Journal of biomechanics, vol. 39, nº supp. 1.
S504-S505.
Li, Y., Aissaoui, Rachid, Turcot, K., Boivin, K., Hagemeister, Nicola et de Guise, Jacques A..
2006.
« Classification of gait patterns using kinematic, kinetic and acceleration variables ».
[Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 39, nº Supp. 1.
S92.
Loyka, Sergey et Gagnon, François.
2006.
« V-BLAST without optimal ordering: analytical performance evaluation for rayleigh fading channels ».
IEEE Transactions on Communications, vol. 54, nº 6.
pp. 1109-1120.
Maalouf, Elie, Saad, Maarouf et Saliah, Hamadou.
2006.
« A higher level path tracking controller for a four-wheel differentially steered mobile robot ».
Robotics and Autonomous Systems, vol. 54, nº 1.
pp. 23-33.
Maalouf, Elie, Saad, Maarouf et Saliah, Hamadou.
2006.
« Integration of a novel path planning and control technique in a navigation strategy ».
International Journal of Modelling, Identification and Control, vol. 1, nº 1.
pp. 52-62.
Mac-Thiong, J-M., Labelle, H. et de Guise, J. A..
2006.
« Assessment of spinopelvic morphology in adolescent idiopathic scoliosis: Comparison with normal adolescents ».
[Résumé d'une communication à une conférence]. Canadian Journal of Surgery = Journal Canadian de Chirurgie, vol. 49, nº Suppl. 2.
pp. 18-19.
Major, Annie, Guidoin, Robert, Soulez, Gilles, Gaboury, Louis A., Cloutier, Guy, Sapoval, Marc, Douville, Yvan, Dionne, Guy, Geelkerken, Robert H., Petrasek, Paul et Lerouge, Sophie.
2006.
« Implant degradation and poor healing after endovascular treatment of abdominal aortic aneurysm: an analysis of explanted stent-grafts ».
Journal of Endovascular Therapy, vol. 13, nº 4.
pp. 457-467.
Mansouri, Abdol-Reza, Mitiche, Amar et Vázquez, Carlos.
2006.
« Multiregion competition: a level set extension of region competition to multiple region image partitioning ».
Computer Vision and Image Understanding, vol. 101, nº 3.
pp. 137-150.
Markarian, N. R., Landry, Jacques-André et Vigneault, Clément.
2006.
« Development of a model for simulating ambient conditions in fresh fruit and vegetable storage facility. ».
Journal of Food, Agriculture & Environment, vol. 4, nº 1.
pp. 34-40.
Masson, Christian et Smaili, Arezki.
2006.
« Numerical study of turbulent flow around a wind turbine nacelle ».
Wind Energy, vol. 9, nº 3.
pp. 281-298.
Melhado, Silvio, Evette, Thérèse, Henry, Eric, Fabricio, Marcio Minto, Segnini, Francisco Jr. et Lautier, François.
2006.
« Uma perspectiva comparativa da gestão de projetos de edificações no brasil e na frança ».
Gestão & Tecnologia de Projetos, vol. 1, nº 1.
pp. 1-22.
Ménard, Michaël, Thomas-Dupuis, Frédéric et Kirk, Andrew G..
2006.
« One-dimensional to two-dimensional channel formatting with micro-optics for wavelength division multiplexing networks ».
Applied Optics, vol. 45, nº 1.
pp. 122-130.
Meunier, Nathalie, Drogui, Patrick, Montane, Camille, Hausler, Robert, Blais, Jean François et Mercier, Guy.
2006.
« Heavy metals removal from acidic and saline soil leachate using either electrochemical coagulation or chemical precipitation ».
Journal of Environmental Engineering, vol. 132, nº 5.
pp. 545-554.
Meunier, Nathalie, Drogui, Patrick, Montane, Camille, Hausler, Robert, Mercier, Guy et Blais, Jean François.
2006.
« Comparison between electrocoagulation and chemical precipitation for metals removal from acidic soil leachate ».
Journal of Hazardous Materials, vol. 137, nº 1.
pp. 581-590.
Mitton, David, Deschenes, S., Laporte, S., Godbout, B., Bertrand, S., de Guise, Jacques A. et Skalli, W..
2006.
« 3D reconstruction of the pelvis from bi-planar radiography ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 9, nº 1.
pp. 1-5.
Mnif, Kais, Kadoch, Michel et Bo, Rong.
2006.
« Virtual backbone based on MCDS for topology control in wireless ad hoc networks ».
WSEAS Transactions on Communications, vol. 5, nº 3.
pp. 395-400.
Monette, Frédéric, Lasfar, Samir, Millette, Louise et Azzouz, Abdelkrim.
2006.
« Comprehensive modeling of mat density effect on duckweed (Lemna minor) growth under controlled eutrophication ».
Water Research, vol. 40, nº 15.
pp. 2901-2910.
Mora, Rodrigo, Rivard, Hugues et Bédard, Claude.
2006.
« Computer representation to support conceptual structural design within a building architectural context ».
Journal of Computing in Civil Engineering, vol. 20, nº 2.
pp. 76-87.
Moraes, Raul P., Santos, Amilton M., Oliveira, Pedro C., Souza, Fátima C. T., do Amaral, Marcelo, Valera, Ticiane S. et Demarquette, Nicole R..
2006.
« Poly(styrene-co-butyl acrylate)-Brazilian montmorillonite nanocomposites, synthesis of hybrid latexes via miniemulsion polymerization ».
Macromolecular Symposia, vol. 245-246, nº 1.
pp. 106-115.
Morais, Douglas, Valera, Ticiane Sanches et Demarquette, Nicole Raymonde.
2006.
« Evaluation of the surface tension of poly(vinyl butyral) using the pendant drop method ».
Macromolecular Symposia, vol. 245-246, nº 1.
pp. 208-214.
Mwale, Fackson, Girard-Lauriault, Pierre-Luc, Wang, Hong Tian, Lerouge, Sophie, Antoniou, John et Wertheimer, Michael R..
2006.
« Suppression of genes related to hypertrophy and osteogenesis in committed human mesenchymal stem cells cultured on a novel nitrogen-rich plasma polymer ».
Tissue Engineering, vol. 12, nº 9.
pp. 2639-2647.
Nascimento Filho, Antonio Pereira, Carvalho, Alexsander Tressino de, Silva, Maria Lúcia Pereira da et Demarquette, Nicole Raymond.
2006.
« Preconcentration in gas or liquid phases using adsorbent thin films ».
Materials Research, vol. 9.
pp. 33-40.
Nau, T., Chevalier, Y., Hagemeister, N., DeGuise, J. A. et Duval, N..
2006.
« Biomechanical comparison of different surgical techniques of posterolateral corner reconstruction in an isolated injury model ».
[Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 39.
S547.
Nerguizian, Vahé, Rafaf, Mustapha, Packirisamy, Muthukumaran et Stiharu, Ion.
2006.
« Ultra violet detection sensors ».
International Journal of High Speed Electronics and Systems, vol. 16, nº 2.
pp. 583-588.
Nonnon, P., Cervera, D., Bigras, Pascal et Wong, Tony.
2006.
« Comprendre les systèmes hydrauliques et pneumatiques industriels ».
Res Academica, vol. 23, nº 2.
pp. 169-186.
Nordström, Ernst et Dziong, Zbigniew.
2006.
« CAC and routing for multi-service networks with blocked wide-band calls delayed, Part I: exact link MDP framework ».
European Transactions on Telecommunications, vol. 17, nº 1.
pp. 21-36.
Noumeir, Rita.
2006.
« Benefits of the DICOM structured report ».
Journal of Digital Imaging, vol. 19, nº 4.
pp. 295-306.
Noumeir, Rita.
2006.
« Radiology interpretation process modeling ».
Journal of Biomedical Informatics, vol. 39, nº 2.
pp. 103-114.
Nuño, Natalia, Groppetti, R. et Senin, N..
2006.
« Static coefficient of friction between stainless steel and PMMA used in cemented hip and knee implants ».
Clinical Biomechanics, vol. 21, nº 9.
pp. 956-962.
Oliveira, Luiz S., Morita, Marisa et Sabourin, Robert.
2006.
« Feature selection for ensembles applied to handwriting recognition ».
International Journal on Document Analysis and Recognition, vol. 8, nº 4.
pp. 262-279.
Ouellet-Plamondon, Claudiane, Chazarenc, Florent, Comeau, Yves et Brisson, Jacques.
2006.
« Artificial aeration to increase pollutant removal efficiency of constructed wetlands in cold climate ».
Ecological Engineering, vol. 27, nº 3.
pp. 258-264.
Ourari, M. Larbi, Dessaint, Louis-A. et Do, Van-Que.
2006.
« Dynamic equivalent modeling of large power systems using structure preservation technique ».
IEEE Transactions on Power Systems, vol. 21, nº 3.
pp. 1284-1295.
Pandey, A., Singh, B., Singh, B. N., Chandra, Ambrish, Al Haddad, Kamal et Kothari, D. P..
2006.
« A review of multilevel power converters ».
Journal of the Institution of Engineers (India): Electrical Engineering Division, vol. 86, nº MAR..
pp. 220-231.
Paquette, Eric, Barré-Brisebois, Colin, Barras, Jean-François et El Ghaouat, Mohammed.
2006.
« Labs and framework for 2D content manipulation ».
Computer Graphics Educational Materials Source .
Peters, Daniel L., Prowse, Terry D., Pietroniro, Alain et Leconte, Robert.
2006.
« Flood hydrology of the Peace-Athabasca Delta, northern Canada ».
Hydrological Processes, vol. 20, nº 19.
pp. 4073-4096.
Pietroniro, Alain, Leconte, Robert, Toth, Brenda, Peters, Daniel L., Kouwen, Nicholas, Conly, Malcolm F. et Prowse, Terry.
2006.
« Modelling climate change impacts in the peace and athabasca catchment and delta: III - integrated model assessment. ».
Hydrological Processes, vol. 20, nº 19.
pp. 4231-4245.
Piloyan, Kevork R. et Nerguizian, Vahé.
2006.
« Novel architecture for routing packetized voice over existing internet infrastructure without using the Internet protocol ».
International Journal of Computer Science and Network Security, vol. 6, nº 7B.
pp. 56-62.
Pinel-Giroux, FM, Mac-Thiong, JM, de Guise, Jacques A., Berthonnaud, E et Labelle, H.
2006.
« Computerized assessment of sagittal curvatures of the spine comparison between cobb and tangent circles techniques ».
Journal of Spinal Disorders and Techniques, vol. 19, nº 7.
pp. 507-512.
Poitau, G. et Kouki, Ammar B..
2006.
« A new constant-amplitude architecture for MQAM transmission ».
IEEE Transactions on Wireless Communications, vol. 5, nº 3.
pp. 622-629.
Prokoshkin, S. D., Brailovski, Vladimir, Khmelevskaya, I. Yu, Dobatkin, S. V., Inaekyan, K. E., Demers, V., Bastarache, E. et Tatianin, E. V..
2006.
« Formation of nanocrystalline structure upon severe rolling plastic deformation and annealing and improvement of set of functional properties of Ti-Ni alloys ».
Bulletin of the Russian Academy of Sciences : Physics, vol. 70, nº 9.
pp. 1536-1541.
Prokoshkin, S. D., Korotitskiy, A. V., Tamonov, A. V., Khmelevskaya, I. Yu, Brailovski, Vladimir et Turenne, S..
2006.
« Comparative X-ray and time-of-flight neutron diffraction studies of martensite crystal lattice in stressed and unstressed binary Ti-Ni alloys ».
Materials Science and Engineering: A, vol. 438-440.
pp. 549-552.
Prowse, T.D., Beltaos, S., Gardner, J.T., Gibson, J.J., Granger, R., Leconte, Robert, Peters, D., Pietroniro, A., Romolo, L. et Toth, B..
2006.
« Climate change, flow regulation and land-use effects on the hydrology of the Peace-Athabasca-Slave System; findings from the Northern Rivers Ecosystem Initiative ».
Environmental Monitoring and Assessment , vol. 113, nº 1-3.
pp. 167-197.
Rahmani, S., Al Haddad, Kamal, Kanaan, H. Y. et Singh, B..
2006.
« Implementation and simulation of modified PWM with two current control techniques applied to single-phase shunt hybrid power filter ».
IEE Proceedings - Electric Power Applications, vol. 153, nº 3.
pp. 317-326.
Rahmani, Salem, Al Haddad, Kamal et Kanaan, Hadi Youssef.
2006.
« A comparative study of shunt hybrid and shunt active power filters for single-phase applications: Simulation and experimental validation ».
[Article de conférence]. Mathematics and Computers in Simulation, vol. 71, nº 4-6.
pp. 345-359.
Rahmani, Salem, Al Haddad, Kamal, Kanaan, Hadi et Fnaiech, Farhat.
2006.
« Modified PWM with a new indirect current control technique applied to a single-phase shunt active power filter ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 31, nº 3.
pp. 135-144.
Rhéault, Frédéric et Laporte, Claude Y..
2006.
« Programme d'amélioration de la performance des processus logiciels dans une société d'État québécoise ».
Génie Logiciel, nº 76.
pp. 17-34.
Rivard, Hugues, Weimin, Wang et Zmeureanu, Radu.
2006.
« Floor shape optimization for green building design ».
Advanced Engineering Informatics, vol. 20, nº 4.
pp. 363-378.
Rizk, Nafee, Martel, Alain et Ramudhin, Amar.
2006.
« A lagrangean relaxation algorithm for multi-item lot-sizing problems with joint piecewise linear resource costs ».
International Journal of Production Economics, vol. 102, nº 2.
pp. 344-357.
Saad, Mohamad, Piedboeuf, Jean-Claude, Akhrif, Ouassima et Saydy, Lahcen.
2006.
« Modal analysis of assumed-mode models of flexible slewing beam ».
International Journal of Modelling, Identification and Control, vol. 1, nº 4.
pp. 325-337.
Sakr, O., Bouzid, A. et Derenne, M..
2006.
« 3D-finite element modelling of bolted flanged joints subjected to external bending loads ».
Welding Research Council Bulletin, nº 516.
pp. 1-56.
Sakr, O., Bouzid, A. et Derenne, M..
2006.
« Development of a transducer for measuring gasket contact stress in bolted flanged joints ».
Welding Research Council Bulletin, nº 516.
pp. 57-85.
Saussie, D., Saydy, L. et Akhrif, Ouassima.
2006.
« Longitudinal flight control design with handling quality requirements ».
Aeronautical Journal, vol. 110, nº 1111.
pp. 627-637.
Sellami, Asma et Abran, Alain.
2006.
« Analyse d'une mesure de la taille fonctionnelle du logiciel selon le point de vue de la métrologie et application à la méthode COSMIC-FFP ».
Génie Logiciel, nº 74.
pp. 2-12.
Skalli, W., Mitton, D., de Guise, J. A. et Dubousset, J..
2006.
« The EOS system: New perspectives for musculoskeletal biomechanics ».
[Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 39, nº Supp. 1.
S460.
Smaili, A., Masson, Christian, Taleb, S. R. et Lamarche, Louis.
2006.
« Numerical study of thermal behavior of a wind turbine nacelle operating in a nordic climate ».
Numerical Heat Transfer, Part B: Fundamentals, vol. 50, nº 2.
pp. 121-141.
Smith, D. L., Ernst, R. E., Samson, C. et Herd, R..
2006.
« Stony meteorite characterization by non-destructive measurement of magnetic properties ».
Meteoritics and Planetary Science, vol. 41, nº 3.
pp. 355-373.
Smith, D. L., Samson, C., Herd, R., Deslauriers, A., Sink, J. E., Christie, I. et Ernst, R. E..
2006.
« Measuring the bulk density of meteorites nondestructively using three-dimensional laser imaging ».
Journal of Geophysical Research E: Planets, vol. 111, nº 10.
Sumner, Jonathon et Masson, Christian.
2006.
« A turbulence-based model for resolving velocity and temperature profiles in the atmospheric surface layer ».
Wind Engineering, vol. 30, nº 4.
pp. 317-340.
Sumner, Jonathon et Masson, Christian.
2006.
« Influence of atmospheric stability on wind turbine power performance curves ».
Journal of Solar Energy Engineering, vol. 128, nº 4.
pp. 531-538.
Swinton, M. C., Maref, W., Bomberg, M. T., Kumaran, M. K. et Normandin, N..
2006.
« In situ performance evaluation of spray polyurethane foam in the exterior insulation basement system (EIBS) ».
Building and Environment, vol. 41, nº 12.
pp. 1872-1880.
Tadj, Chakib et Laroussi, Toufik.
2006.
« Dynamic verification of an object-rule knowledge base using colored petri nets ».
Journal of Systemics, Cybernetics and Informatics, vol. 4, nº 3.
pp. 23-31.
Terriault, Patrick, Viens, F. et Brailovski, Vladimir.
2006.
« Non-isothermal finite element modeling of a shape memory alloy actuator using ANSYS ».
Computational Materials Science, vol. 36, nº 4.
pp. 397-410.
Theriault, Philippe, Terriault, Patrick, Brailovski, Vladimir et Gallo, Richard.
2006.
« Finite element modeling of a progressively expanding shape memory stent ».
Journal of Biomechanics, vol. 39, nº 15.
pp. 2837-2844.
Tran, Luu Dung, Masson, Christian et Smaili, Arezki.
2006.
« A stable second-order mass-weighted upwind scheme for unstructured meshes ».
International Journal for Numerical Methods in Fluids, vol. 51, nº 7.
pp. 749-771.
Trudel, Sylvie, Lavoie, Jean-Marc, Paré, Marie-Claude et Suryn, Witold.
2006.
« PEM: The small company-dedicated software process quality evaluation method combining CMMISM and ISO/IEC 14598 ».
Software Quality Journal , vol. 14, nº 1.
pp. 7-23.
Tu, Xiaoping, Dessaint, Louis-A., El Kahel, Mohammed et Barry, Alpha.
2006.
« Modeling and experimental validation of internal faults in salient pole synchronous machines including space harmonics ».
[Article de conférence]. Mathematics and Computers in Simulation, vol. 71, nº 4-6.
pp. 425-439.
Tu, Xiaoping, Dessaint, Louis-A., El Kahel, Mohammed et Barry, Alpha O..
2006.
« A new model of synchronous machine internal faults based on winding distribution ».
IEEE Transactions on Industrial Electronics, vol. 53, nº 6.
pp. 1818-1828.
Turcot, Katia, Aissaoui, Rachid, Boivin, Karine, Pelletier, Michel, Hagemeister, Nicola et de Guise, Jacques A..
2006.
« Three-dimensional pattern of knee linear accelerations during treadmill walking on an asymptomatic and osteoarthritis populations ».
Gait and Posture, vol. 24, nº supp. 2.
S144-S146.
Ullum, Ulrik, Wright, Jennifer, Dayi, Oguz, Ecder, Ali, Soulaimani, Azzeddine, Piché, Robert et Kamath, Hemant.
2006.
« Prediction of rotating stall within an impeller of a centrifugal pump based on spectral analysis of pressure and velocity data ».
Journal of Physics : Conference Series, vol. 52.
pp. 36-45.
Valera, Ticiane S., Morita, Augusto T. et Demarquette, Nicole R..
2006.
« Study of morphologies of PMMA/PP/PS ternary blends ».
Macromolecules, vol. 39, nº 7.
pp. 2663-2675.
Van de Putte, M., Hagemeister, Nicola, St-Onge, N., Parent, G. et de Guise, Jacques A..
2006.
« Habituation to treadmill walking ».
Bio-Medical Materials and Engineering, vol. 16, nº 1.
pp. 43-52.
van Oorschot, Paul C., Robert, Jean-Marc et Martin, Miguel Vargas.
2006.
« A monitoring system for detecting repeated packets with applications to computer worms ».
International Journal of Information Security, vol. 5, nº 3.
pp. 186-199.
Vázquez, Carlos, Mitiche, Amar et Laganière, Robert.
2006.
« Joint multiregion segmentation and parametric estimation of image motion by basis function representation and level set evolution ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 28, nº 5.
pp. 782-793.
Voix, Jérémie, Hager, Lee D. et Zeidan, Jean.
2006.
« Experimental validation of the objective measurement of individual custom earplugs field performance ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 34, nº 3.
pp. 30-31.
Voix, Jérémie, Laville, Frédéric et Nélisse, Hugues.
2006.
« Effective attenuation of double hearing protection : a field study ».
[Résumé d'une communication à une conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 34, nº 3.
p. 123.
Vu, Viet Hung et Nguyen, V. Q..
2006.
« Earthquake loading analysis methods for bridge structures according to 22TCN 272-01 and AASHTO LRFD ».
Journal of Transport and Communication, nº 14-2006.
pp. 47-55.
Wang, C. M., Ung, B., Sheng, Y. et Chang, J. Y..
2006.
« Enhanced transmission through nano-aperture on a tapered metallic substrate ».
Optics Communications, vol. 265, nº 2.
pp. 678-682.
Wang, X., Jahazi, M. et Yue, S..
2006.
« Substructure of high temperature compressed titanium alloy IMI 834 ».
Materials Science and Engineering: A, vol. 434, nº 1-2.
pp. 188-193.
Wanjara, P., Brochu, M. et Jahazi, M..
2006.
« Thin gauge titanium manufacturing using multiple-pass electron beam welding ».
Materials and Manufacturing Processes, vol. 21, nº 5.
pp. 439-451.
Wanjara, Priti, Jahazi, M., Monajati, H. et Yue, S..
2006.
« Influence of thermomechanical processing on microstructural evolution in near- alloy IMI834 ».
Materials Science and Engineering: A, vol. 416, nº 1-2.
pp. 300-311.
Wen Wan, Zuo, Kadoch, Michel et Elhakeem, Ahmed.
2006.
« Optimizing the performance of tree based reliable multicast ».
Computers and Electrical Engineering, vol. 32, nº 5.
pp. 394-410.
Wuthrich, R. et Hof, L. A..
2006.
« The gas film in spark assisted chemical engraving (SACE) - A key element for micro-machining applications ».
International Journal of Machine Tools and Manufacture, vol. 46, nº 7-8.
pp. 828-835.
Yacoubi, L., Al Haddad, Kamal, Dessaint, Louis-A. et Fnaiech, Farhat.
2006.
« Linear and nonlinear control techniques for a three-phase three-level NPC boost rectifier ».
IEEE Transactions on Industrial Electronics, vol. 53, nº 6.
pp. 1908-1918.
Yang, D. Q., Zhang, Gaixia, Sacher, E., José-Yacamán, M. et Elizondo, N..
2006.
« Evidence of the interaction of evaporated Pt nanoparticles with variously treated surfaces of highly oriented pyrolytic graphite ».
Journal of Physical Chemistry B, vol. 110, nº 16.
pp. 8348-8356.
Yerushalmi, Laleh, Nefil, Sabria, Hausler, Robert et Guiot, Serge R..
2006.
« Removal of pyrene and benzo(a)pyrene from contaminated water by sequential and simultaneous ozonation and biotreatment ».
Water Environment Research, vol. 78, nº 11.
pp. 2286-2292. Compte rendu de conférence
Abou, Séraphin-Chally, Saad, Maarouf et Dao, Thien-My.
2006.
« Physical system modelling for the design and control of mechatronic systems ».
In Proceedings of the Eight IASTED International Conference on Control and Applications (Montreal, Canada, May 24-26, 2006)
pp. 92-98.
Calgary, Canada : ACTA Press.
Abran, Alain.
2006.
« A Roadmap to Maturity for Software Measures ».
In Proceedings of the International Conference on Software Process and Product Measurement : MENSURA 2006 (Cadiz, Spain, Nov. 4-5, 2006)
pp. 1-14.
Servicio de Publicaciones de la Universidad de Cádiz.
Abran, Alain, Al Quataish, R. et Cuardrado, J..
2006.
« Investigation of the metrology concepts within ISO 9126 on software product quality evaluation ».
In Proceedings of the 10th WSEAS International Conference on Computers (Athens, Greece, Jul.13-15, 2006)
pp. 864-872.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society (WSEAS).
Abu Talibq, M., Abran, Alain et Ormandjieva, O..
2006.
« Markov model and functional size with COSMIC-FFP ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3240-3245.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Adankon, M.M. et Cheriet, Mohamed.
2006.
« New formulation of SVM for model selection ».
In International Joint Conference on Neural Networks (IJCNN) (Vancouver, Canada, Jul. 16-21, 2006)
pp. 1900-1907.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Agba, Basile L., Amoussou, G., Dziong, Zbigniew, Kadoch, Michel et Gagnon, François.
2006.
« Performances analysis of mobile ad hoc routing protocols under realistic mobility and power models ».
In OPNETWORK 2006 (Washington D.C., WA, USA, Aug. 28-Sept. 1, 2006)
OPNET Technologies, Inc..
Agba, Basile L., Gagnon, François et Kouki, Ammar B..
2006.
« Scenarios generator for ad hoc networks ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2677-2681.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Agba, Basile L., Gagnon, François et Kouki, Ammar B..
2006.
« Small-scale fading modeling for tactical ad hoc networks ».
In 12th International Symposium on Antenna Technology and Applied Electromagnetics and Canadian Radio Sciences Conference (ANTEM/URSI) (Montreal, QC, Canada, July 16-19, 2006)
pp. 421-425.
Winnipeg, Canada : ANTEM .
Agba, Basile L., Gagnon, François et Kouki, Ammar B..
2006.
« Spécification et définition de scénarios pour les réseaux ad hoc : application au domaine militaire ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 676-679.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Agba, Basile L., Gagnon, François et Kouki, Ammar B..
2006.
« Tactical ad hoc scenarios generator coupled with channel modeling ».
In IEEE Wireless and Microwave Technology Conference (WAMICON) (Clearwater Beach, FL, USA, Dec. 4-5, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Aissaoui, Rachid, Husse, S., Mecheri, H., Parent, G. et de Guise, Jacques A..
2006.
« Automatic filtering techniques for three-dimensional kinematics data using 3D motion capture system ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 614-619.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Akbalik, A., Larbi, R. et Penz, B..
2006.
« Dynamic programming approach for a capacitated lot sizing problem coupled with transportation activities ».
In Information Control Problems in Manufacturing : A Proceedings Volume form 12th IFAC Conference (St-Étienne, France, May 17-19, 2006)
pp. 177-182.
Elsevier LTD.
Al Haddad, Kamal, Hamouda, Mahmoud et Fnaiech, Farhat.
2006.
« Control of the reactive line current provided by a Dual-Bridge Matrix converter using the input-output feedback linearization approach ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 803-808.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Al-Kazzaz, H., Medraj, M., Cao, X., Xiao, M. et Jahazi, M..
2006.
« Effect of laser power and joint gap on weld quality of aerospace grade ZE41A-T5 magnesium alloy using Nd:YAG laser ».
In Magnesium technology in the global age : proceedings of the International Symposium on Magnesium Technology in the Global Age, October 1-4, 2006, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 503-518.
Canadian Institute of Mining, Metallurgy and Petroleum.
Alwehaibi, A., Kadoch, Michel et ElHakeem, Ahmed.
2006.
« QoS for diffserv over heterogeneous IP and MPLS networks ».
In Proceedings of the Sixth IASTED International Multi-Conference on Wireless and Optical Communications (Banff, Canada, Jul. 3-5, 2006)
pp. 196-200.
Anaheim, CA, USA : ACTA Press.
Amarir, Said et Al Haddad, Kamal.
2006.
« A new high frequency modeling technique of travelling waves in long cable PWM drives ».
In 32nd Annual Conference on IEEE Industrial Electronics (IECON) (Paris, France, Nov. 6-10, 2006)
pp. 1119-1124.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Amarir, Said et Al-haddad, Kamal.
2006.
« A new reflected wave modeling technique for PWM ASD-motors ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2510-2515.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Amoussou, G., Mohanna, H., Kadoch, Michel et Dziong, Zbigniew.
2006.
« Improvement of route cache in DSR protocol by predicting effective communication distance between nodes ».
In OPNETWORK 2006 (Washington D.C., WA, USA, Aug. 28-Sept. 1, 2006)
April, Alain et Desharnais, Jean-Marc.
2006.
« Software maintenance knowledge-based system (S3Mxpert) : Web-based software maintenance expert training ».
In Proceedings of the Fifth IASTED International Conference on Web-based Education (Puerto Vallarta, Mexico, Jan. 23-25, 2006)
pp. 270-274.
Anaheim, CA, USA : ACTA Press.
April, Alain, Desharnais, Jean-Marc et Dumke, Reiner.
2006.
« A formalism of ontology to support a software maintenance knowledge based system ».
In 18th International Conference on Software Engineering and Knowledge Engineering, SEKE 2006 (San Francisco, CA, USA, July 5-7, 2005)
pp. 331-336.
Stokie, IL, USA : Knowledge Systems Institute Graduate School.
Arafin, M. A., Medraj, M., Turner, D. P. et Bocher, P..
2006.
« Optimization of process variables during TLP Bonding of nickel superalloys ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 301-314.
Canadian Institute of Mining, Metallurgy and Petroleum.
Arafin, M. A., Medraj, M., Turner, D. P. et Bocher, Philippe.
2006.
« Thermodynamic modeling and experimental investigation of brazed joints used in aerospace industry ».
In 3rd International Brazing and Soldering Conference (San Antonio, TX, USA, April 24-26, 2006)
pp. 189-196.
Materials Park, OH, USA : ASM International.
Arafin, Muhammad A., Medraj, Mamoun, Turner, Daniel P. et Bocher, Philippe.
2006.
« Mathematical Modeling and Experimental Investigations of Isothermal Solidification during Transient Liquid Phase Bonding of Nickel Superalloys ».
In THERMEC 2006 Supplement (Vancouver, Canada, Jul. 4 - 8, 2006)
Coll. « Advanced Materials Research », vol. 15-17.
pp. 882-887.
Clausthal-Zellerfeld, Germany : Trans Tech Publications.
Arshad, M. et Kouki, Ammar B..
2006.
« Precise estimation of MIMO channel capacity from RF measurements ».
In 9th European Conference on Wireless Technology (Manchester, UK, Sept. 10-12, 2006)
pp. 209-211.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Arteau, Jean, Beauchamp, Yves, Petit, Yvan, Lajoie, Olivier et Labranche, Laetitia.
2006.
« Évaluation des systèmes d’attaches antichutes pour les poseurs d’acier d’armature (ferrailleurs) ».
In Congrès du RRSSTQ, Congrès de l'ACFAS (Montréal, QC, Canada, 17-19 mai 2006)
Assi, R., McClure, G. et Yao, G. C..
2006.
« On predicting the seismic response of telecommunication towers mounted on building rooftops ».
In Civil Engineering Infrastructure Systems (CEIS 2006) : June 12-14, 2006, American University of Beirut (AUB), Beirut-Lebanon (Beirut, Lebanon, June 12-14, 2006)
Arab Scientific Publishers.
Assi, R., McClure, G. et Yao, G.C..
2006.
« Seismic force amplification factors for telecommunication towers mounted on building rooftops ».
In Proceedings of the 8th U.S. National Conference on Earthquake Engineering (San Francisco, CA, USA, Apr. 18-22, 2006)
pp. 9652-9661.
Earthquake Engineering Research Institute ( EERI ).
Awde, Ali, Hina, Manolo Dulva, Tadj, Chakib, Ramdane-Cherif, Amar et Bellik, Yacine.
2006.
« A paradigm of a pervasive multimodal multimedia computing system for the visually-impaired users ».
In Advances in Grid and Pervasive Computing : First International Conference, GPC 2006, Taichung, Taiwan, May 3-5, 2006 : Proceedings (Taichung, Taïwan, May 3-5, 2006)
Coll. « Lecture Notes in Computer Science », vol. 3947.
pp. 620-633.
Heidelberg, Germany : Springer-Verlag.
Awde, Ali, Hina, Manolo Dulva, Tadj, Chakib, Ramdane-Cherif, Amar et Bellik, Yacine.
2006.
« Information access in a multimodal multimedia computing system for mobile visually-impaired users ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2834-2839.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Badri, Bechir, Thomas, Marc, Archambault, R. et Sassi, Sadok.
2006.
« La transformée de Julien pour différentier les chocs synchrones des chocs asynchrones ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006)
448-459 .
Calgary, Canada : ACVM.
Badri, Bechir, Thomas, Marc et Sassi, Sadok.
2006.
« Étude et développement d'un système expert basé sur les réseaux de neurones pour le diagnostic des défauts de roulements ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montréal, QC, Canada, 25-27 oct. 2006)
pp. 386-403.
Calgary, Canada : ACVM.
Baggag, Abdelkader, Chekki, Mondher, Habashi, Wagdi G. et Morency, François.
2006.
« Parallelization of a finite volume scheme applied to ice accretion ».
In 36th AIAA Fluid Dynamics Conference (San Francisco, CA, USA, June 5-8, 2006)
Coll. « AIAA paper »
pp. 2061-2071.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Barka, N., Bocher, Philippe, Brousseau, J., Galopin, Michel et Sundararajan, S..
2006.
« Modeling and sensitivity study of the induction hardening process ».
In THERMEC 2006 Supplement (Vancouver, Canada, Jul. 4-8, 2006)
Coll. « Advanced Materials Research », vol. 15-17.
pp. 525-530.
Uetikon-Zuerich, Switzerland : Trans Tech Publications.
Barka, N., Bocher, Philippe, Galopin, Michel, Brousseau, J. et Sundararajan, S..
2006.
« Sensitivity study of induction hardening machine parameters of SAE-4340 steel specimen ».
In Conference of Metallurgists (COM) (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 525-530.
Montreal, Canada : The Metallurgy and Materials Society of CIM.
Barrak, Rim, Msehli, Mounira, Ghazel, Adel et Kouki, Ammar.
2006.
« Optimized AIS/DSC homodyne receiver design ».
In 13th IEEE International Conference on Electronics, Circuits and Systems (ICECS) (Nice, France, Dec. 10-12, 2006)
pp. 1324-1327.
IEEE Section France.
Beaulieu, N. M., Botez, Ruxandra, Hiliuta, A., Popov, A. V. et Mureithi, N..
2006.
« Validation of a ground dynamics model formulation by use of landing data ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2682-2687.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bédard, Claude.
2006.
« On the adoption of computing and IT by industry : the case for integration in early building design ».
In Intelligent Computing in Engineering and Architecture :13th EG-ICE Workshop 2006, Ascona, Switzerland, June 25-30, 2006, Revised Selected Papers (Ascona, Switzerland, June 25-30, 2006)
Coll. « Lecture Notes in Computer Science », vol. 4200.
pp. 62-73.
Heidelberg, Germany : Springer Verlag.
Bel Haj Youssef, Nesrine, Al Haddad, Kamal et Kanaan, Hadi.
2006.
« A new methodology for Vienna rectifier rating and controller tuning based on control saturation analysis: experimental validation ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1328-1333.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bélanger, P., Berry, A., Pasco, Y., St-Amant, Y. et Rajan, S..
2006.
« Active structural acoustic control of a Bell 407 transmission noise ».
In AHS (American Helicopter Society) 62nd Annual Forum (Phoenix, AZ, USA, May 09-11, 2006)
pp. 788-797.
AHS.
Beldjehem, M. et Cheriet, Mohamed.
2006.
« Validation of Hybrid MinMax FuzzyNeuro systems ».
In Annual Meeting of the North American Fuzzy Information Processing Society (NAFIP) (Montreal, Canada, June 3-6, 2006)
pp. 4-7.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ben Ayed, Ismail et Mitiche, Amar.
2006.
« A partition constrained minimization scheme for efficient multiphase level set image segmentation ».
In 2006 IEEE International Conference on Image Processing (Atlanta, GA, USA, Oct. 8-11, 2006)
pp. 1641-1644.
IEEE.
Ben Ayed, Ismail, Mitiche, Amar et Belhadj, Ziad.
2006.
« Variational unsupervised classification of polarimetric images ».
In IEEE International Conference on Geoscience and Remote Sensing Symposium, 2006. IGARSS 2006 (Denver, CO, USA, July 31-Aug. 4, 2006)
pp. 4198-4200.
IEEE.
Ben Ayed, Ismail, Mitiche, Amar et Belhadj, Ziad.
2006.
« Variational unsupervised segmentation of multi-look complex polarimetric images using a wishart observation model ».
In 2006 IEEE International Conference on Image Processing (Atlanta, GA, USA, Oct. 8-11, 2006)
pp. 3233-3236.
IEEE.
Bendali, A., Labedan, R., Domingue, F. et Nerguizian, Vahé.
2006.
« Holes effects on RF MEMS parallel membranes capacitors ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 2140-2143.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bensoussan, David et Kelemen, Matei.
2006.
« Application of quasi-linear feedback to the control of a hard disk drive servo system ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 307-310.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Benzaouia, A., Akhrif, Ouassima et Saydy, L..
2006.
« Stabilization of switched systems subject to actuator saturation by output feedback ».
In 45th IEEE Conference on Decision and Control (San Diego, CA, USA, Dec.13-15, 2006)
pp. 777-782.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bertezini, A. L. et Melhado, S. B..
2006.
« A avaliação do processo de projeto de arquitetura e as perspectivas para sua evolução ».
In Anais do Seminário Internacional NUTAU´2006 : Inovações Tecnológicas & Sustentabilidade (São Paulo, Brazil, Oct. 09-13, 2006)
São Paulo : FAUUSP.
Biskri, Djallel Eddine et Botez, Ruxandra.
2006.
« Aerodynamic forces approximations calculated with a new analytical formulation ».
In ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Jul. 23-27, 2006)
pp. 739-743.
New York, NY, USA : American Society of Mechanical Engineers.
Bitsuamlak, Girma, Stathopoulos, T. et Bédard, Claude.
2006.
« Numerical modeling of wind flow over complex terrain ».
In 3rd National Wind Engineering Conference (Kolkata, India, Jan. 5-7, 2006)
Blanchette, Handy et Al Haddad, Kamal.
2006.
« Switching power MOSFET performance: a compromise between EMI generation and thermal consideration ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1293-1298.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Blinova, A., Amelin, Y. et Samson, C..
2006.
« U-Pb dating of phosphates and chondrules in H-6 chondrites ».
In 13th Canadian Astronautics Conference of the Canadian Aeronautics and Space Institute (ASTRO) (Montreal, QC, Canada, Apr. 25-27, 2006)
Canadian Aeronautics and Space Institute.
Bo Rong, Yi Qian, Qingyan Hu, R., Guizani, S. et Kadoch, Michel.
2006.
« Key management for pyramidal security model of multicast communication in mobile Ad Hoc networks ».
In IEEE Global Telecommunications Conference (GLOBECOM) (San Francisco, CA, USA, Nov. 27-Dec. 1, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Boisvert, Jonathan, Bellizzi, Thibaut, Champliaud, Henri et Seers, Patrice.
2006.
« Print depth prediction in hot forming process with a reconfigurable die ».
In ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
Boisvert, Jonathan, Champliaud, Henri, Bellizzi, Thibaut et Seers, Patrice.
2006.
« Simulation and optimisation of a reconfigurable discrete die for the hot forming of thick steel plates in hydro power industry ».
In ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
Bonev, Ilian, Chablat, Damien et Wenger, Philippe.
2006.
« Working and assembly modes of the agile eye ».
In IEEE International Conference on Robotics and Automation (ICRA) (Orlando, FL, USA, May 15-19, 2006)
pp. 2317-2322.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Bonev, Ilian, Yu, A. et Zsombor-Murray, P..
2006.
« XY-theta positioning table with parallel kinematics and unlimited theta rotation ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3113-3117.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Botez, Ruxandra et Biskri, Djallel Eddine.
2006.
« Simulation method based on analytical error correction for aeroservoelastic interactions studies on an F/A-18 SRA aircraft ».
In Proceedings of the 15th IASTED International Conference on Applied Simulation and Modelling (Rhodes, Greece, June 26-28, 2006)
pp. 27-32.
Calgary, Canada : ACTA Press.
Botez, Ruxandra, Dinu, A. D. et Cotoi, I..
2006.
« Optimisation of unsteady aerodynamic forces for aircraft aeroservoelastic studies ».
In 3rd European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering (Lisbon, Portugal, June 5-8, 2006)
Botez, Ruxandra, Dinu, Alin Dorian et Cotoi, Iulian.
2006.
« Method based on Chebyshev polynomials theories for aeroservoelastic interactions studies on a F/A-18 aircraft ».
In Proceedings of the 25th IASTED International Conference on Modelling, Identification, and Control, MIC 2006 (Lanzarote, Spain, Feb. 6-8, 2006)
pp. 320-325.
Calgary, Canada : ACTA Press.
Botez, Ruxandra, Dinu, Alin Dorian, Cotoi, Iulian, Stathopoulos, Nicholas, Dickinson, Martin, Therien, Sylvain et Rathe, Alexandre.
2006.
« Aeroservoelasticity interactions studies on a business aircraft ».
In AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (Newport, RI, USA, May 1-4, 2006)
Coll. « AIAA paper »
pp. 4128-4137.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Botez, Ruxandra, Dinu, Alin et Cotoi, Lulian.
2006.
« Approximation of unsteady aerodynamic forces for closed loop flutter aeroservoelasticity studies ».
In 44th AIAA Aerospace Sciences Meeting and Exhibit (Reno, NV, USA, Jan. 9-12, 2006)
Coll. « AIAA paper »
pp. 5198-5206.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Boucher, Annie et Miresco, Edmond T..
2006.
« Framework of a virtual laboratory for construction project ».
In Building on IT : Joint International Conference 14-16 June 2006 in Montreal, Canada (Montreal, QC, Canada, June 14-16, 2006)
pp. 3581-3586.
Boulé, Marc, Chenard, Jean-Samuel et Zilic, Zeljko.
2006.
« Adding debug enhancements to assertion checkers for hardware emulation and silicon debug ».
In International Conference on Computer Design (San Jose, CA, USA, Oct. 01-04, 2006)
pp. 294-299.
IEEE.
Boulé, Marc et Zilic, Zeljko.
2006.
« Efficient automata-based assertion-checker synthesis of PSL properties ».
In IEEE International High Level Design Validation and Test Workshop (Monterey, CA, USA, Nov. 08-10, 2006)
pp. 69-76.
IEEE.
Boulianne, G., Beaumont, J.-F., Boisvert, M., Brousseau, J., Cardinal, P., Chapdelaine, C., Comeau, M., Ouellet, P. et Osterrath, F..
2006.
« Computer-assisted closed-captioning of live TV broadcasts in French ».
In INTERSPEECH 2006 : ICSLP ; Proceedings of the Ninth International Conference on Spoken Language Processing (Pittsburgh, PA, USA, Sept. 17-21, 2006)
pp. 273-276.
International Speech and Communication Association.
Bourque, Pierre, Stroian, V. et Abran, Alain.
2006.
« Proposed concepts for a tool for multidimensional performance modeling in software engineering management ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3252-3257.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Boutana, Nabil, Bocher, Philippe, Jahazi, Mohammad, Piot, D. et Montheillet, F..
2006.
« Utilisation des automates cellulaires pour étudier le comportement en fatigue-fluage des alliages de titane ».
In Matériaux 2006 (Dijon, France, 13-17 nov. 2006)
pp. 781-790.
Brodeur, Philippe, Masson, Christian et Sibuet-Watters, Christophe.
2006.
« Numerical simulations of wind distributions over very complex terrain ».
In 44th AIAA Aerospace Sciences Meeting and Exhibit (Reno, NV, USA, Jan. 9-12, 2006)
American Institute of Aeronautics and Astronautics.
Brosseaud, Yves et St-Jacques, Michèle.
2006.
« Improvement of the surface characteristics regarding the safety and comfort of the users ».
In 10th International Conference on Asphalt Pavements - August 12 to 17, 2006, Quebec City, Canada (Quebec, Canada, Aug.12-17, 2006)
pp. 177-185.
White Bear Lake, MN : International Society for Asphalt Pavements.
Brosseaud, Yves et St-Jacques, Michèle.
2006.
« Mise en relation des propriétés de surface des enrobés avec la sécurité et le confort des usagers ».
In Infra 2006 : recueil des communications, 12e édition de la Semaine des infrastructures urbaines : le Québec en chantier : optimiser les interventions = Infra 2006 : proceedings, 12th Annual Urban Infrastructure Week : Québec under construction : optimizin (Québec, QC, Canada, 20-22 nov. 2006)
Montréal, Canada : Centre d'expertise et de recherche en infrastructures urbaines (CERIU).
Buglione, L., Abran, Alain et Girard, D..
2006.
« R-LIME : improving the risk dimension in the LIME model ».
In Proceedings of the 3rd World Congress for Software Quality : September 26-30, 2005, Munich, Germany (Munich, Germany, Sept. 26-30, 2005)
pp. 157-172.
Erlangen : ISQI.
Buglione, Luigi et Abran, Alain.
2006.
« Introducing root-cause analysis and orthogonal defect classification at lower CMMI maturity levels ».
In Proceedings of the International Conference on Software Process and Product Measurement : MENSURA 2006 (Cadiz, Spain, Nov. 4-5, 2006)
pp. 29-41.
Servicio de Publicaciones de la Universidad de Cádiz.
Cao, X., Jahazi, M. et Mehta, R..
2006.
« Friction stir welding of AZ31B-H24 magnesium alloy butt joints ».
In 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006)
pp. 279-289.
TWI Ltd.
Cao, X., Xiao, M. et Jahazi, M..
2006.
« Effect of processing parameters on laser cladding of magnesium alloy castings ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 147-158.
Canadian Institute of Mining, Metallurgy and Petroleum.
Cao, X., Xiao, M., Jahazi, M. et Shariff, T..
2006.
« Surface cladding of magnesium alloy castings using Nd:YAG laser ».
In Magnesium technology 2006 : proceedings of the symposium held during the TMS 2006 annual meeting in San Antonio, Texas, USA, March 12-16, 2006 (San Antonio, TX, USA, Mar. 12-16, 2006)
pp. 359-364.
Warrendale, Pa : The Minerals, Metals & Materials Society.
Catley, A., Samson, C. et van Geel, P..
2006.
« Seismic velocity analysis to determine moisture distribution in a bioreactor landfill ».
In 21st International Conference on Solid Waste Technology and Management (ICSW) (Philadelphia, PA, USA, March 26-29, 2006)
Catley, A., van Geel, P. et Samson, C..
2006.
« Overview of geophysical techniques to measure moisture content in landfills ».
In Sea to sky geotechnique, 2006 : 59th Canadian Geotechnical Conference and 7th Joint CGS/IAH-CNC Groundwater Specialty Conference, October 1-4, Vancouver, BC, Canada : conference proceedings = Géotechnique sea to sky, 2006 : 59e Conférence géotechnique (Vancouver, BC, Canada, Oct. 1-4, 2006)
pp. 810-817.
Canadian Geotechnical Society = Société canadienne de géotechnique.
Cavalin, P. R., de Souza Britto, A., Bortolozzi, F., Sabourin, Robert et Soares Oliveira, L. E..
2006.
« An implicit segmentation-based method for recognition of handwritten strings of characters ».
In ACM Symposium on Applied Computing (SAC) (Dijon, France, April 23-27, 2006)
pp. 836-840.
New York, NY, USA : ACM Press.
Cavalin, P., Oliveira, L. S., Koerich, A. L. et Britto, A. S..
2006.
« Wood defect detection using grayscale images and an optimized feature set ».
In IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics (Paris, France, Nov. 6-10, 2006)
pp. 3408-3412.
Chablat, D., Bonev, Ilian et Wenger, P..
2006.
« Self motions of a special 3-RPR planar parallel robot ».
In Advances in Robot Kinematics : Mechanisms and Motion (Ljubljana, Slovenia, June 25-29, 2006)
221–228.
Dordrecht, Netherlands : Springer.
Chandrasekaran, Arvind, Packirisamy, Muthukumaran et Nerguizian, Vahé.
2006.
« Modeling of SOI based photonic crystals for far IR applications ».
In 2006 IEEE International Symposium on Industrial Electronics (Montreal, QC, Canada, July 9-13, 2006)
pp. 3387-3390.
Piscataway, NJ, USA : IEEE.
Charfi, F., Al Haddad, Kamal et Sellami, F..
2006.
« Analysis and identification of embedded power system faults using wavelet transform ».
In 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exposition (EVS 2006) (Yokohama, Japan, Oct. 23-28, 2006)
Washington, D. C., USA : Electric Drive Transportation Association.
Charfi, F., Sellami, F. et Al Haddad, Kamal.
2006.
« Fault diagnostic in power system using wavelet transforms and neural networks ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1143-1148.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Chatrathi, K., Packirisamy, M., Stiharu, I. et Nerguizian, Vahé.
2006.
« Effect of curvature on dynamic behavior of cantilever MEMS ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3397-3399.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Cheikhi, Laila, Abran, Alain et Suryn, Witold.
2006.
« Harmonization of usability measurements in IS09126 software engineering standards ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3246-3251.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Chherawala, Y., Lepage, Richard et Doyon, G..
2006.
« Food grading/sorting based on color appearance through machine vision: the case of fresh cranberries ».
In 2nd Information and Communication Technologies (ICTTA) (Damascus, Syria, April 24-28, 2006)
pp. 1540-1545.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Chiocchio, François, Lacasse, Caroline, Rivard, Hugues, Forgues, Daniel et Bédard, Claude.
2006.
« Information technology and collaboration in the canadian construction industry ».
In Proceedings of the Joint CIB W78, W102, ICCCBE, ICCC, and DMUCE International Conference on Computing and Decision Making in Civil and Building Engineering (Montreal, QC, Canada, June 14-16, 2006)
pp. 3773-3783.
Chion, Clément, Da Costa, Luis E. et Landry, Jacques-André.
2006.
« Genetic programming for agricultural purposes ».
In 8th annual conference on Genetic and Evolutionary Computation Conference (GECCO) (Seattle, WA, USA, Jul. 8-12, 2006)
pp. 783-789.
New York, NY, USA : ACM Press.
Chow, Stanley, Gustave, Christophe, McFarlane, Brad, Wiemer, Douglas et Robert, Jean-Marc.
2006.
« Situation monitoring and analysis of security risk for networked services ».
In IEEE Military Communications Conference (MILCOM) (Washington, DC, USA, Oct. 23-25, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Chureau, A., Savaria, Y., Boland, Jean-François, Zilic, Z., Thibeault, Claude et Gagnon, François.
2006.
« Building heterogeneous functional prototypes using articulated interfaces ».
In IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Gatineau, Que., Canada, June 18-21, 2006)
pp. 137-140.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Coallier, François et Champagne, Roger.
2006.
« An enterprise architecture process model ».
In International Conference on Software Engineering Research and Practice and Conference on Programming Languages and Compilers (SERP) (Las Vegas, NV, USA, June 26-29, 2006)
pp. 804-810.
USA : CSREA Press.
Cornieles, E., Saad, Maarouf, Gauthier, Guy et Saliah-Hassane, H..
2006.
« Modeling and simulation of a multivariable process control ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2700-2705.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Côté, Marc-Alexis, Suryn, Witold et Georgiadou, Elli.
2006.
« Software quality model requirements for software quality engineering ».
In 14th International Software Quality Management & INSPIRE Conference (SQM) (Southampton Hampshire, UK, Apr. 10-12, 2006)
Coti, Camille, Herault, Thomas, Lemarinier, Pierre, Pilard, Laurence, Rezmerita, Ala, Rodriguez, Eric et Cappello, Franck.
2006.
« Blocking vs. non-blocking coordinated checkpointing for large-scale fault tolerant MPI ».
In ACM/IEEE conference on Supercomputing (Tampa, FL, USA, Nov. 11-17, 2006)
Coutu, D., Brailovski, Vladimir, Demers, V. et Terriault, Patrick.
2006.
« The design diagram for optimal shape memory alloys linear actuators ».
In 10th International Conference on New Actuators (Bremen, Germany, June 14-16, 2006)
pp. 924-927.
Bremen, Germany : HVG Hanseatische Veranstaltungs-GmbH.
Da Costa, Luis E. et Landry, Jacques-André.
2006.
« Relaxed genetic programming ».
In 8th annual conference on Genetic and Evolutionary Computation Conference (GECCO) (Seattle, WA, USA, July 8-12, 2006)
pp. 937-938.
New York, NY, USA : ACM Press.
Daneva, Maya, Ormandjieva, Olga, Abu Talib, Manar et Abran, Alain.
2006.
« A case study of metric-based and scenario driven black box testing for SAP projects ».
In International Workshop on Software Measurement (IWSM-MetriKon) (Postdam, Germany, Nov. 1-3, 2006)
pp. 285-304.
Shaker-Verlag.
Dao, T. M., Abou, S. C. et Makrem, C..
2006.
« Optimisation of manufacturing group scheduling using the hybrid neural networks simulation: A case of study ».
In 2006 IIE Annual Conference and Exhibition (Orlando, FL, USA, May 20-24, 2006)
Institute of Industrial Engineers.
Dao, Thien-My, Makrem, C. et Abou, Seraphin C..
2006.
« A hybrid hopfield neural networks based simulation approach for optimization of manufacturing group scheduling ».
In 36th International Conference on Computers and Industrial Engineering (Taipei, Taiwan, June 20-23, 2006)
David, Éric, Nair, T., Godin, T. et Bellemare, J..
2006.
« Modeling of a generator I-V curve from the ramped direct voltage method ».
In Conference Record of the 2006 IEEE International Symposium on Electrical Insulation (ISEI) (Toronto, Canada, June 11-14, 2006)
pp. 10-13.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
de Paula, B. C., Enembreck, F. et Koerich, A. L..
2006.
« Agente inteligente para jogos de estrategia baseados em turnos : uma abordagem utilizando planejamiento baseado em casos ».
In Digital Proceedings of the V Brazilian Symposium on Computer Games and Digital Entertainment (Recife, Brazil, Nov. 8-10, 2006)
Desharnais, Jean-Marc, Abran, Alain et Cuadrado, J..
2006.
« Convertibility of function points to COSMIC-FPP: identification and analysis fo functional outliers ».
In Proceedings of the International Conference on Software Process and Product Measurement : MENSURA 2006 (Cadiz, Spain, Nov. 6-8, 2006)
pp. 190-205.
Servicio de Publicaciones de la Universidad de Cádiz.
Deslandes, Dominic et Wu, Ke.
2006.
« High isolation substrate integrated waveguide passive front-end for millimeter-wave systems ».
In IEEE MTT-S International microwave symposium digest (San Francisco, CA, USA, June 11-16, 2006)
pp. 982-985.
IEEE.
Dia, S. M. F., Thibeault, Claude et Gagnon, François.
2006.
« A very high speed and efficient CIC decimation filter core ».
In IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Gatineau, Que., Canada, June 18-21, 2006)
pp. 61-64.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Diany, Mohammed et Bouzid, Hakim.
2006.
« Evaluation of contact stress in stuffing box packings ».
In ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Jul. 23-27, 2006)
pp. 87-92.
New York, NY, USA : American Society of Mechanical Engineers.
Dias de Assuncao, Marcos et Buyya, Rajkumar.
2006.
« An evaluation of communication demand of auction protocols in grid environments ».
In Proceedings of the 3rd International Workshop on Grid Economics and Business Models (Singapour, Singapour, May 16, 2006)
pp. 24-33.
World Scientific.
Djambazian, H. H., Nerguizian, Chahé, Nerguizian, Vahé et Saad, Maarouf.
2006.
« 3D inclinometer and MEMS acceleration sensors ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3338-3342.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Djouab, Rachida et Suryn, Witold.
2006.
« An ISO/IEC standards-based quality requirement definition approach: applicative analysis of three quality requirements definition methods ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3231-3239.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Dodo Amadou, Mamane Moustapha, Kenné, Jean-Pierre, Saad, Maarouf et Nerguizian, Vahé.
2006.
« Virtual and remote laboratories ».
In IEEE International Conference on E-Learning in Industrial Electronics (Hammamet, Tunisia, Dec. 18-20, 2006)
pp. 173-176.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Dos Santos, E.M., Sabourin, Robert et Maupin, P..
2006.
« Single and multi-objective genetic algorithms for the selection of ensemble of classifiers ».
In International Joint Conference on Neural Networks (IJCNN) (Vancouver, Canada, Jul. 16-21, 2006)
pp. 3070-3077.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Draisey, S., Mullins, M., Samson, C., Holladay, J. S. et Lim, D..
2006.
« Martian unmanned science skimmer – Simulation ».
In 13th Canadian Astronautics Conference of the Canadian Aeronautics and Space Institute (ASTRO) (Montreal, QC, Canada, Apr. 25-27, 2006)
Canadian Aeronautics and Space Institute.
Dubé, Martine, Hubert, Pascal, Yousefpour, Ali et Denault, Johanne.
2006.
« Resistance welding of thermoplastic composites skin/stringer specimens ».
In SAMPE '06 : creating new opportunities for the world economy (Long Beach, CA, USA, Apr. 30-May 4, 2006)
Society for the Advancement of Material and Process Engineering.
Dubourg, L., Gagnon, F. O., Nadeau, F., St-Georges, L. et Jahazi, M..
2006.
« Process window optimization for FSW of thin and thick sheet Al alloys using statistical methods ».
In 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006)
pp. 419-430.
TWI.
Dubourg, L., Jahazi, M., Dezaise, G. et Bocher, P..
2006.
« Microstructure and mechanical characterisation of FSW 7075-T6 lap joints ».
In Aerospace Materials and Manufacturing: Emerging Materials, Processes, and Repair Techniques (Montréal, Canada, Oct.1-4, 2006)
pp. 107-120.
Canadian Institute of Mining, Metallurgy and Petroleum.
Duchaine, François, Baten, E.M., Champliaud, Henri et Bersee, H.E.N..
2006.
« Comparison of beam theories with finite elemente analysis in three-point bending of thick composites ».
In 8th International Conference on Computational Structures Technology (Las Palmas de Gran Canaria, Spain, Sept.12-15, 2006)
Stirlingshire, UK : Civil-Comp Press.
Dumas, Raphaël, Verriest, Jean-Pierre, Skalli, Wafa et de Guise, Jacques.
2006.
« Comparison of bi-planar radiography and adjusted scaling equations for the computation of appropriate 3D body segment inertial parameters ».
In 2006 Digital Human Modeling for Design and Engineering Conference (Detroit, MI, USA, Apr. 3-7, 2006)
Coll. « SAE Technical Papers », vol. 2006-01-2372.
SAE International.
Dumke, Reiner, Abran, Alain et Buglione, Luigi.
2006.
« Suggestions for improving measurement plans: first results from a BMP application ».
In Software Measurement European Forum (SMEF) : Proceedings of SMEF 2006 (Rome, Italy, May 10-12, 2006)
pp. 209-224.
El Bazzal, Z., Kadoch, Michel, Agba, Basile L., Gagnon, François et Bennani, Maria.
2006.
« An efficient management algorithm for clustering in mobile ad hoc network ».
In ACM International Workshop on Performance Monitoring, Measurement and Evaluation of Heterogeneous Wireless and Wired Networks (PMHWN) (Torremolinos, Malaga, Spain, Oct. 2-6, 2006)
pp. 25-31.
New York, NY, USA : Association for Computing Machinery.
El Hachimi, Mohamed, Abouaissa, A. et Bennani, Maria.
2006.
« MPLS based approach for heterogeneous and scalabe multicast in diffserv ».
In 31st IEEE Conference on Local Computer Networks (LCN) (Tampa, FL, USA, Nov. 14-16, 2006)
pp. 515-518.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
El Hani, M.A., Rivest, Louis et Fortin, C..
2006.
« On specifying an information management tool to support manufacturing process planning in aerospace: a case study ».
In ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) (Philadelphia, PA, USA, Sept. 10-13, 2006)
pp. 143-151.
New York, NY, USA : American Society of Mechanical Engineers.
El Madjoubi, M., Vu-Khanh, Toan et David, Éric.
2006.
« Effects of physical aging on yielding kinetics of polypropylene ».
In 8th International Conference on Mesomechanics (MESO) (Oporto, Portugal, July 19-22, 2006)
pp. 109-116.
Portugal : FEUP ( the Faculdade de Engenharia da Universidade do Porto).
El-Amsar, Mohamed, Birafane, A. et Kouki, Ammar B..
2006.
« Optimization of the LINC average power efficiency using Chireix combining systems ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3169-3172.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
El-Asmar, M., Birafane, A. et Kouki, Ammar B..
2006.
« A simplified model for chireix outphasing combiner efficiency ».
In 36th European Microwave Conference (Manchester, UK, Sept.10-15, 2006)
pp. 192-195.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
El-Asmar, M., Hamdane, W., Birafane, A. et Kouki, A. B..
2006.
« Efficiency improvement of Chireix power amplifier with OFDM signals ».
In 10th World Multi-Conference on Systemics, Cybernetics and Informatics, WMSCI 2006, Jointly with the 12th International Conference on Information Systems Analysis and Synthesis, ISAS 2006 (Orlando, FL, USA, July 16-19, 2006)
pp. 375-379.
El-Asmar, Mohamed, Hariri, Y., Domingue, Frederic et Nerguizian, Vahé.
2006.
« Improving the time response of MEMS switches for RF applications ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 344-347.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
El-Asmar, Mohamed et Kouki, Ammar B..
2006.
« Improving chireix combiner efficiency using MEMS switches ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 2310-2313.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
El-Bazzal, Z., Agba, Basile L., Kadoch, Michel, Gagnon, François et Bennani, Maria.
2006.
« A flexible weight based clustering algorithm in mobile ad hoc networks ».
In International Conference on Systems and Networks Communications (ICSNC) (Tahiti, French Polynesia, Oct. 29-Nov. 3, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Elmaraghy, R. et Bauer, Dominique Bernard.
2006.
« Virtual steel model concept for information and fabrication integration ».
In Building on IT : Joint International Conference 14-16 June 2006 in Montreal, Canada (Montreal, QC, Canada, June 14-16, 2006)
pp. 1-11.
Elzayat, Ahmed, Degbe, Médéa, Domingue, Frédéric et Nerguizian, Vahé.
2006.
« A suspended MEMS inductor of a new geometry and a novel anchor for RF applications ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3332-3337.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Fabricio, M. M., Melhado, S. B. et Bertezini, A. L..
2006.
« A formação do arquiteto e seu papel de líder na equipe de projetos ».
In Anais do Seminário Internacional NUTAU´2006 : Inovações Tecnológicas & Sustentabilidade (São Paulo, Brazil, Oct. 09-13, 2006)
São Paulo : FAUUSP.
Fallaha, Charles, Saad, Maarouf, Kanaan, Hadi et Wen-Hong, Zhu.
2006.
« Sliding mode nonlinear switching functions for control input transient constraints reduction ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 284-288.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Feng, Zhengkun et Soulaïmani, Azzeddine.
2006.
« Nonlinear aeroelasticity computations in transonic flows using tightly coupling algorithms ».
In ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, July 23-27, 2006)
pp. 169-178.
New York, NY, USA : American Society of Mechanical Engineers.
Fimbel, Éric et Abiza, R..
2006.
« Tracking the pseudo-pitch of unvoiced sounds : a hand-free interface modality for disabled users ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 553-558.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Forgues, D..
2006.
« Maximizing outcomes: connecting construction project results to business programmes ».
In 1st ICEC & IPMA Global Congress on Project Management (Ljubljana, Slovenia, Avril 2006)
Forgues, Daniel.
2006.
« Increasing client capabilities through requirement engineering ».
In Building on IT : Joint International Conference 14-16 June 2006 in Montreal, Canada (Montréal, Canada, June 14-16, 2006)
pp. 3647-3656.
Foucault, Gilles, Lê, Van Ngan, Cuillière, Jean-Christophe, François, Vincent et Maranzana, Roland.
2006.
« A topological model for the representation of meshing constraints in the context of finite element analysis ».
In ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (IDETC/CIE) (Philadelphia, PA, USA, Sept. 10-13, 2006)
pp. 153-164.
New York, NY, USA : American Society of Mechanical Engineers.
Francis, Adel et Miresco, Edmond T..
2006.
« Toward a new generation of construction management software ».
In Building on IT : Joint International Conference 14-16 June 2006 in Montreal, Canada (Montreal, QC, Canada, June 14-16, 2006)
pp. 3558-3567.
François, Véronique et Aboutorabi, S. S..
2006.
« A design criterion for cleavage-robust microstructured fibers ».
In Optical Fiber Communication Conference and the National Fiber Optic Engineers Conference (OFC/NFOEC) (Anaheim, CA, USA, March 5-10, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Frédéric, M., Dupont, T., Redon, E. et Lay, B..
2006.
« Etude expérimentale de la transparence acoustique d’une plaque et d’une coque semi-cylindrique recouvert d’un matériau absorbant et d’une masse lourde ».
In Actes du 8ème Congrès Français d'Acoustique (Tours, France, 24-27 avril 2006)
pp. 541-544.
Société française d'acoustique.
Fromageau, Jérémie, Lerouge, Sophie, Maurice, Roch L., Soulez, Gilles et Cloutier, Guy.
2006.
« Ultrasound elastography for the non-invasive healing follow-up of abdominal aneurysms ».
In IEEE Ultrasonics Symposium, 2006 (Vancouver, BC, Canada, Oct. 2-6, 2006)
pp. 610-613.
Piscataway, NJ, USA : IEEE.
Fuhrman, C. P..
2006.
« Appreciation of software design concerns via open-source tools and projects ».
In 10th Workshop on Pedagogies and Tools for the Teaching and Learning of Object Oriented Concepts (Nantes, France, July 3, 2006)
Gabrea, Marcel.
2006.
« Speech enhancement based on a robust adaptive kalman filter ».
In International Workshop on Acoustic Echo and Noise Control (IWAENC) (Paris, France, Sept. 12-14, 2006)
Gagnon, Martin, Tahan, Antoine, Coutu, André et Thomas, Marc.
2006.
« Analyse modale opérationnelle en présence d'excitations harmoniques : étude de cas sur des composantes de turbine hydroélectrique ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montréal, QC, Canada, 25-27 oct. 2006)
pp. 320-329.
Calgary, Canada : ACVM.
Garcia, S. E., Saad, Maarouf et Akhrif, Ouassima.
2006.
« Constrained stochastic tournament selection in flight control problems ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 295-300.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Gargour, Christian, Ramachandran, V. et Ramachandran, R. P..
2006.
« On the properties and design of stable IIR transfer functions generated using fibonnaci numbers ».
In IEEE Asia Pacific Conference on Circuits and Systems, 2006. APCCAS 2006. (Singapore, Dec. 4-7, 2006)
pp. 1228-1231.
Piscataway, NJ, USA : IEEE.
Gauthier, Guy et Boulet, B..
2006.
« Terminal iterative learning control applied to thermoforming machine reheat phase ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 353-357.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Gholipour, J. et Jahazi, M..
2006.
« Effect of lubricant in hydroforming of Ni-based super alloy tubes ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 447-460.
Canadian Institute of Mining, Metallurgy and Petroleum.
Gil, Blanca et Suryn, Witold.
2006.
« The analysis of the application of ISO/IEC 9126-3 Internal Quality measures applicability : state of the art 2006 ».
In 19th International Conference on Software & Systems Engineering and their Applications (ICSSEA) (Paris, France, Dec. 5-7, 2006)
Godin, T., David, Éric et Bellemare, J..
2006.
« Experience with the ramped direct voltage method to assess stator winding insulation condition ».
In HydroVision (Portland, OR, USA, July 31-Aug. 4, 2006)
Grami, S. et Bigras, Pascal.
2006.
« Nonlinear identification of friction model using concave/convex parameterization ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 272-277.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Granger, Éric, Henniges, P., Oliveira, L.S. et Sabourin, Robert.
2006.
« Particle swarm optimization of fuzzy ARTMAP parameters ».
In International Joint Conference on Neural Networks (IJCNN) (Vancouver, Canada, Jul. 16-21, 2006)
pp. 2060-2067.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hacini, L., Lê, Van Ngan, Bocher, Philippe et Thibault, D..
2006.
« Effect of energy level on stresses induced by robotized hammer peening ».
In Conference of Metallurgists (COM) (Montreal, QC, Canada, Oct.1-4, 2006)
781-790 .
Montreal, Canada : The Metallurgy and Materials Society of CIM.
Hacini, L., Lê, Van Ngan, Bocher, Philippe et Thibault, D..
2006.
« Residual stresses induced by robotized hammer peening : the effect of impact energy level ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 2-4, 2006)
pp. 759-768.
Montreal : Canadian Institute of Mining, Metallurgy and Petroleum.
Hamadi, A. B., Al Haddad, Kamal et Rahmani, R..
2006.
« Series active filter to mitigate power quality for medium size industrial loads (multi pulses transformer and modern AC drive) ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1510-1515.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hamdi, Abdelaziz et Nerguizian, Vahé.
2006.
« A CPW millimeter wave reconfigurable antenna using MEMS capacitors ».
In Proceedings of the 1st International Workshop on Wireless Communications in Underground and Confined Area (IWWCUCA) (Val d'Or, QC, Canada, June 6-7, 2005)
Hamouda, Mahmoud, Fnaiech, Farhat et Al Haddad, Kamal.
2006.
« Input filter design for SVM dual-bridge matrix converters ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 797-802.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hamouda, Mahnoud, Fnaiech, Fnaiech et Al Haddad, Kamal.
2006.
« Control of the line current provided by dual-bridge matrix converters using a discrete-time sliding mode control approach ».
In 32nd Annual Conference on IEEE Industrial Electronics (IECON) (Paris, France, Nov. 6-10, 2006)
pp. 1727-1732.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hariri, Y. et Thibeault, Claude.
2006.
« Improving a 3 data-source diagnostic method ».
In IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Gatineau, Que., Canada, June 18-21, 2006)
pp. 149-152.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Harker, Matthew et O'Leary, Paul.
2006.
« First order geometric distance (The Myth of Sampsonus) ».
In BMVC - Proceedings of the British Machine Vision Conference (Edinburgh, Scotland, Sept. 04-07, 2006)
pp. 87-96.
British Machine Vision Association, BMVA.
Harrabi, L., Dolez, Patricia, Vu-Khanh, Toan et Lara, J..
2006.
« Methods for the characterization of protective glove flexibility ».
In 2nd International Conference of Applied Research Textile (Monastir, Tunisia, Nov. 30-Dec. 2, 2006)
Harrabi, L., Dolez, Patricia, Vu-Khanh, Toan et Lara, J..
2006.
« Optimization in the selection of protective gloves for resistance to mechanical risks ».
In 2nd International Conference of Applied Research Textile (Monastir, Tunisia, Nov. 30-Dec. 2, 2006)
Harrabi, Lofti, Dolez, Patricia, Vu-Khanh, Toan et Lara, Jaime.
2006.
« Evaluation of the flexibility of protective gloves ».
In 3rd European Conference on Protective Clothing (ECPC) and NOKOBETEF (Gdynia, Poland, May 10-12, 2006)
Warsaw, Poland : Central Inst. Labour Protection-Natl Research Inst..
Henniges, Philippe, Granger, Éric, Sabourin, Robert et Oliveira, Luiz S..
2006.
« Impact of fuzzy ARTMAP match tracking strategies on the recognition of handwritten digits ».
In Smart systems engineering : infra-structure systems engineering, bio-informatics and computational biology and evolutionary computation : proceedings of the Artificial Neural Networks in Engineering Conference (ANNIE 2006) (Saint-Louis, MO, USA, Nov. 5-8, 2006)
Coll. « Intelligent Engineering Systems through Artificial Neural Networks », vol. 16.
pp. 465-472.
ASME.
Héritier, M. et Noumeir, Rita.
2006.
« Fast maximum intensity projection with 3D nonlinear wavelets ».
In Medical Imaging 2006 : Visualization, Image-Guided Procedures, and Display (San Diego, CA, USA, Feb. 12-14, 2006)
Coll. « Proceedings of SPIE », vol. 6141.
Bellingham, WA, USA : SPIE - The International Society for Optical Engineering.
Hiliuta, Adrian et Botez, Ruxandra.
2006.
« New technique for a helicopter flight model estimation based on flight test data ».
In 24th AIAA Applied Aerodynamics Conference (San Francisco, CA, USA, June 5-8, 2006)
Coll. « AIAA paper »
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Hiliuta, Adrian, Landry, René Jr et Gagnon, François.
2006.
« Fuzzy enhancement of GPS - INS synergy ».
In 19th International Technical Meeting of the Satellite Division of the Institute of Navigation (ION GNSS) (Fort Worth, TX, USA, Sept. 26-29, 2006)
pp. 1671-1678.
Manassas, VA, USA : The Institute of Navigation.
Hina, Manolo Dulva, Tadj, Chakib et Ramdane-Cherif, Amar.
2006.
« Attribute-driven design of incremental learning component of a ubiquitous multimodal multimedia computing system ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 323-327.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hina, Manolo Dulva, Tadj, Chakib et Ramdane-Cherif, Amar.
2006.
« Design of an incremental machine learning component of a ubiquitous multimodal multimedia computing system ».
In IEEE International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob) (Montreal, Canada, June 19-21, 2006)
pp. 434-441.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hina, Manolo Dulva, Tadj, Chakib et Ramdane-Cherif, Amar.
2006.
« From requirements analysis to architecture evaluation of a ubiquitous multimodal multimedia computing system ».
In Canadian University Software Engineering Conference (CUSEC) : Engineering Useful Software (Montreal, QC, Canada, Jan. 19-21, 2006)
pp. 70-78.
Hina, Manolo Dulva, Tadj, Chakib et Ramdane-Cherif, Amar.
2006.
« Machine learning-assisted device selection in a context-sensitive ubiquitous multimodal multimedia computing system ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3014-3019.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Hina, Manolo Dulva, Tadj, Chakib et Ramdane-Cherif, Amar.
2006.
« Self-management considerations in designing a pervasive multimodal multimedia computing system ».
In International Symposium on Communications and Information Technologies (ISCIT) (Bangkok, Thaïland, Oct. 18-Sept. 20, 2006)
pp. 1050-1055.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ho, T.N. et Ngô, Anh Dung.
2006.
« Prediction of environmental effects on the mechanical behavior of hemp and coir fibers using artificial neural Networks ».
In Design, manufacturing and applications of composites : proceedings of the Sixth Joint Canada-Japan Workshop on Composites, Toronto, Canada, August 2006 (Toronto, ON, Canada, Aug. 24-26, 2006)
pp. 20-21.
Lancaster, PA, USA : Destech Publications, INC.
Idri, Ali, Abran, Alain et Mbarki, Samir.
2006.
« An experiment on the design of radial basis function neural networks for software cost estimation ».
In 2nd Information and Communication Technologies (ICTTA) (Damascus, Syria, April 24-28, 2006)
pp. 1612-1617.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Idri, Ali, Zahi, Azeddine et Abran, Alain.
2006.
« Generating fuzzy term sets for software project attributes by using fuzzy C-means and real coded genetic algorithms ».
In International Conference on Information and Communication Technology for Muslim World (Kuala Lumpur, Malaysia, Nov. 21-23, 2006)
pp. 120-127.
Idri, Ali, Zahi, Azeddine et Abran, Alain.
2006.
« Software cost estimation by fuzzy analogy for web hypermedia applications ».
In Proceedings of the International Conference on Software Process and Product Measurement : MENSURA 2006 (Cadiz, Spain, Nov. 6-8, 2006)
pp. 53-62.
Servicio de Publicaciones de la Universidad de Cádiz.
Ilie, Horia et April, Alain.
2006.
« Annotation of video images for indexing sequences using Oracle 10g ».
In MCCSIS 2006 : IADIS Virtual Multi Conference on Computer Science and Information Systems, May 15-19, 2006)
pp. 210-212.
International Association for Development of the Information Society.
Ilie, Horia, April, Alain, Kosch, Harald, Hofbauer, Christian et Bourque, Pierre.
2006.
« Exploration using a commercially available database for the identification of video images scenes ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, QC, Canada, Jul. 9-13, 2006)
pp. 3293-3298.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Jaglbauer, V. et Melhado, S. B..
2006.
« Análise da gestão da qualidade em um pequeno escritório de arquitetura ».
In Anais do Seminário Internacional NUTAU´2006 : Inovações Tecnológicas & Sustentabilidade (São Paulo, Brazil, Oct. 09-13, 2006)
São Paulo : FAUUSP.
Jalilian, F., Drew, R. A. L. et Jahazi, M..
2006.
« Joining of Inconel 617 sheets using TLP bonding process with Ni-Si-B interlayer ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 315-326.
Canadian Institute of Mining, Metallurgy and Petroleum.
Jeetender, Amritsar, Stiharu, Ion, Packirisamy, Muthukumaran et Nerguizian, Vahé.
2006.
« Behaviour of enzyme molecules under piezo-electric vibrations ».
In Photonics North 2006 (Quebec, Canada, June 5-8, 2006)
Coll. « Proceedings of SPIE », vol. 6343.
Bellingham, WA, USA : SPIE - The International Society for Optical Engineering.
Jeetender, Amritsar, Stiharu, Ion, Packirisamy, Muthukumaran et Nerguizian, Vahé.
2006.
« MEMS based sensor and method for optical detection of peptides bio-reaction time ».
In MEMS, MOEMS, and Micromachining II (Strasbourg, France, April 3-4, 2006)
Coll. « Proceedings of SPIE », vol. 6186.
Bellingham, WA, USA : SPIE - The International Society for Optical Engineering.
Joncas, Simon, Van Rijswijk, K., Charron, J.F., Bersee, H.E.N. et Beukers, A..
2006.
« Interfacial shear strength properties of vacuum-infused anionic polyamide-6 glass-fiber composites ».
In 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (Newport, RI, USA, May 1-4, 2006)
Coll. « AIAA paper »
pp. 7862-7869.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Joncas, Simon, Van Rijswijk, K., Thibault-Liboiron, K., Bersee, H. E. N. et Beukers, A..
2006.
« Mechanical properties of vacuum infused anionic polyamide-6 glass-fiber composites : a benchmark study ».
In SAMPE Europe ; International SAMPE Europe Conference : Latest advancements of applied composite technology (Paris, France, Mar. 27-29, 2006)
SAMPE.
Jutras, Dominic et Bigras, Pascal.
2006.
« Control of an actuator made of two antagonist McKibben muscles via LMI optimization ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3072-3077.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kaddissi, C., Kenné, Jean-Pierre et Saad, Maarouf.
2006.
« Indirect adaptive control of an electro-hydraulic servo system based on nonlinear backstepping ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3147-3153.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kadoch, Michel et Mnif, K..
2006.
« Routing protocols performance enhancement using virtual backbone in mobile Ad hoc networks ».
In OPNETWORK 2006 (Washington D.C., WA, USA, Aug. 28-Sept. 1, 2006)
Kadoch, Michel et Mnif, Kais.
2006.
« Construction and maintenance of backbone for routing protocols enhancement in mobile ad hoc networks ».
In 10 th IEEE Singapore International Conference on Communication Systems (ICCS) (Singapore, Singapore, Oct. 30-Nov. 1, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Kanaan, H. Y. et Al Haddad, Kamal.
2006.
« Design, control and simulation of a high-efficiency low-cost DC-DC converter for high current applications ».
In 28th Annual International Telecommunications Energy Conference (INTELEC) (Providence, RI, USA, Sept. 10-14, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, H. Y., Al Haddad, Kamal, Sauriole, G. et Chaffaï, R..
2006.
« Practical design of a SEPIC power factor corrector with DC-voltage regulation ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 964-969.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, H. Y., Georges, S., Hayek, A. et Al Haddad, Kamal.
2006.
« Modelling and comparative evaluation of control techniques applied to a PWM three-phase four-wire shunt active power filter ».
In 1st IEEE Conference on Industrial Electronics and Applications (ICIEA) (Singapore, Singapore, May 24-26, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Kanaan, H. Y., Hayek, A. et Al Haddad, Kamal.
2006.
« Modeling and control of a single-phase sheppard-taylor based power factor corrector ».
In IEEE International Conference on Industrial Technology (ICIT) (Mumbai, India, Dec. 15-17, 2006)
pp. 2785-2790.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kanaan, H. Y., Hayek, A., Georges, S. et Al Haddad, Kamal.
2006.
« Averaged modelling, simulation and linear control design of a PWM fixed frequency three-phase four-wire shunt active power filter for a typical industrial load ».
In 3rd IET International Conference on Power Electronics, Machines and Drives (PEMD) (Dublin, Ireland, April 4-6, 2006)
pp. 252-256.
Stevenage, UK : Institution of Engineering and Technology.
Kanaan, H. Y., Rahammi, S. et Al Haddad, Kamal.
2006.
« New modeling, simulation and control of a PWM single-phase shunt hybrid power filter ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 960-963.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kandil, N., Georges, S. et Saad, Maarouf.
2006.
« Rapid power system transient stability limit search using signal energy and neural networks ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1658-1661.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kandil, N., Wamkeue, R., Saad, M. et Georges, S..
2006.
« An efficient approach for shorterm load forecasting using Artificial Neural Networks ».
In IEEE International Symposium on Industrial Electronics (Montréal, QC, Canada, July 09-13, 2006)
pp. 1928-1932.
IEEE.
Kececi, Nihal, Garbajosa, Juan et Bourque, Pierre.
2006.
« Modeling functional requirements to support traceability analysis ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3305-3310.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kechroud, A., Soulaïmani, Azzeddine et Atoine, X..
2006.
« Numerical investigations of a padé-type non-reflecting boundary conditions ».
In 7th World Congress on Computational Mechanics (WCCM) (Los Angeles, CA, USA, July 16-22, 2006)
Kechroud, R., Soulaïmani, Azzeddine et Antoine, X..
2006.
« Padé absorbing boundary conditions for finite element solution of high frequency scattering problems ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2626-2630.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kedjar, Bachir et Al Haddad, Kamal.
2006.
« LQR with integral action for phase current control of constant switching frequency vienna rectifier ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1461-1466.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Kenné, Jean-Pierre.
2006.
« Hierarchical control of production and maintenance rates of a two-tandem-machine system ».
In Proceedings of the 15th IASTED International Conference on Applied Simulation and Modelling (Rhodes, Greece, June 26-28, 2006)
pp. 145-150.
Calgary, Canada : ACTA Press.
Kenny, Patrick, Boulianne, Gilles, Ouellet, Pierre et Dumouchel, Pierre.
2006.
« Improvements in factor analysis based speaker verification ».
In IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) (Toulouse, France, May 14-19, 2006)
I113-I116.
Kenny, Patrick, Boulianne, Gilles, Ouellet, Pierre et Dumouchel, Pierre.
2006.
« The geometry of the channel space in GMM-based speaker recognition ».
In IEEE Odyssey-The Speaker and Language Recognition Workshop (San Juan, PR, USA, June 28-30, 2006)
Piscataway, N.J. : Institute of Electrical and Electronics Engineers.
Kenny, Patrick, Gupta, Vishwa, Boulianne, Gilles, Ouellet, Pierre et Dumouchel, Pierre.
2006.
« Feature normalization using smoothed mixture transformations ».
In Proceedings of the Annual Conference of the International Speech Communication Association, INTERSPEECH (Pittsburgh, PA, USA, Sept. 17-21, 2006)
pp. 25-28.
United Kingdom : DUMMY PUBID.
Kerboua, Y., Lakis, A.A., Thomas, Marc, Marcouiller, L. et Toorani, M.H..
2006.
« Dynamic analysis of coupled-fluid structure systems ».
In Proceedings of the 2nd WSEAS International Conference on Applied and Theoretical Mechanics (Venice, Italy, Nov. 20-22, 2006)
pp. 249-258.
Khadkikar, V. et Chandra, Ambrish.
2006.
« A novel structure for three-phase four-wire distribution system utilizing unified power quality conditioner (UPQC) ».
In International Conference on Power Electronics, Drives and Energy Systems, 2006. PEDES '06 (New Delhi, India, Dec. 12-15, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Khadkikar, V., Chandra, Ambrish, Barry, A. O. et Nguyen, T. D..
2006.
« Analysis of power flow in UPQC during voltage sag and swell conditions for selection of device ratings ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 867-872.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Khadkikar, V., Chandra, Ambrish, Barry, A. O. et Nguyen, T. D..
2006.
« Application of UPQC to protect a sensitive load on a polluted distribution network ».
In IEEE Power Engineering Society General Meeting (PES) (Montreal, Canada, June 18-22, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Khadkikar, V., Chandra, Ambrish, Barry, A. O. et Nguyen, T. D..
2006.
« Conceptual study of unified power quality conditioner (UPQC) ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1088-1093.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Khadkikar, Vinod et Chandra, Ambrish.
2006.
« A novel control approach for unified power quality conditioner - Q without active power injection for voltage sag compensation ».
In 2006 IEEE International Conference on Industrial Technology (ICIT) (Mumbai, India, Dec. 15-17, 2006)
pp. 779-784.
IEEE.
Khaled, Amar, Tremblay, Robert et Massicotte, Bruno.
2006.
« Assessing the adequacy of the 30% combination rule in estimating the critical response of bridge piers under multi-directional earthquake components ».
In 7th International Conference on Short & Medium Span Bridges (Montréal, QC, Canada, Aug. 23-25, 2006)
pp. 909-919.
Canadian Society for Civil Engineering.
Khalili, M., Leconte, R. et Brissette, F..
2006.
« Efficient watershed modeling using a multi-site weather generator for meteorological data ».
In Geo-Environment and Landscape Evolution II
Coll. « WIT Transactions on Ecology and the Environment », vol. 89.
pp. 273-281.
WIT Press.
Khalili, M., Leconte, Robert et Brissette, François.
2006.
« On the use of multi site generated meteorological input data for realistic hydrological modeling in the context of climat change impact studies. ».
In IEEE EIC Climate Change Technology Conference (Ottawa, Canada, May 10-12, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Kincic, S., Chandra, Ambrish et Lagacé, Pierre Jean.
2006.
« Dynamic voltage support of the transmission network from distribution level ».
In IEEE Power Engineering Society General Meeting (PES) (Montreal, Canada, June 18-22, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Ko, Albert H. R., Sabourin, Robert et Britto Jr., Alceu.
2006.
« Combining diversity and classification accuracy for ensemble selection in random subspaces ».
In International Joint Conference on Neural Networks (IJCNN) (Vancouver, Canada, Jul. 16-21, 2006)
pp. 2144-2151.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ko, Albert Hung Ren, Sabourin, Robert et Britto, Alceu de Souza.
2006.
« A new objective function for ensemble selection in random subspaces ».
In 18th International Conference on Pattern Recognition (ICPR) (Hong Kong, China, Aug. 20-24, 2006)
pp. 185-188.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ko, Albert Hung-Ren, Sabourin, Robert et De Souza Britto Jr, Alceu.
2006.
« Evolving ensemble of classifiers in random subspace ».
In 8th annual conference on Genetic and Evolutionary Computation Conference (GECCO) (Seattle, WA, USA, July 8-12, 2006)
pp. 1473-1480.
New York, NY, USA : ACM Press.
Koerich, Alessandro L., Britto Jr, Alceu S., Oliveira, Luiz E. S. et Sabourin, Robert.
2006.
« Fusing high- and low level features for handwritten word recognition ».
In 10th International Workshop on Frontiers in Handwriting Recognition (IWFHR) (La Baule, France, Oct. 23-26, 2006)
pp. 151-156.
Kotrane, Asma, Thomas, Marc et Sassi, Sadok.
2006.
« Conception, réalisation et caracterisation dynamique d’un amortisseur magnéto-rhéologique ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006)
pp. 473-491.
Calgary, Canada : ACVM.
Labaki, R., Kedjar, B. et Al Haddad, Kamal.
2006.
« Single-phase active front end converter with series compensation ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 769-774.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Lacroix, Benoît, Seers, Patrice et Liu, Zhaoheng.
2006.
« A passive nonlinear damping design for a road race car application ».
In Non-Conference Specific Technical Papers - 2006 (Warrendale, PA, USA, Dec., 2006)
Coll. « SAE Technical Papers »
Warrendale, PA : SAE International.
Lacroix, Benoît, Seers, Patrice et Liu, Zhaoheng.
2006.
« Race car suspension design with a nonlinear damping ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006)
pp. 54-65.
Calgary, Canada : CMVA.
Lagacé, Pierre Jean et Vuong, M. H..
2006.
« Graphical user interface for interpreting and validating soil resistivity measurements ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1841-1845.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Lagacé, Pierre Jean, Vuong, M.H. et Al Haddad, Kamal.
2006.
« A time domain model for transient simulation of synchronous machines using phase coordinates ».
In IEEE Power Engineering Society General Meeting (PES) (Montreal, Canada, June 18-22, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Lalonde, Sébastien et Guilbault, Raynald.
2006.
« Dynamic analysis of spur gears by non linear modeling ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006)
pp. 15-35.
Calgary : ACVM.
Lamarre, L. et David, Éric.
2006.
« Dielectric response of rotating machine stator insulation system ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Kansas City, USA, Oct.15-18, 2006)
pp. 549-552.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Langar, Rami, Bouabdallah, Nizar et Tohme, Samir.
2006.
« A mobility tracking model and handoff performance analysis for wireless MPLS networks ».
In IEEE International Conference on Communications (Istanbul, Turkey, June 11-15, 2006)
pp. 1843-1848.
IEEE.
Langar, Rami, Bouabdallah, Nizar et Tohme, Samir.
2006.
« Handoff management schemes and performance analysis for IP/MPLS-based cellular networks ».
In IEEE 17th International Symposium on Personal, Indoor and Mobile Radio Communications (Helsinki, Finland, Sept. 11-14, 2006)
IEEE.
Langar, Rami, Bouabdallah, Nizar et Tohme, Samir.
2006.
« Handoff support for mobility in future wireless MPLS networks: A proposal and analysis ».
In IEEE Wireless Communications and Networking Conference (WCNC) (Las Vegas , NV, USA, Apr. 03-06, 2006)
IEEE.
Langar, Rami, Bouabdallah, Nizar, Tohme, Samir et Boutaba, Raouf.
2006.
« Mobility modeling and handoff analysis for IP/MPLS-based cellular networks ».
In GLOBECOM - IEEE Global Telecommunications Conference (San Francisco, CA, USA, Nov. 27-Dec. 01, 2006)
IEEE.
Langar, Rami, Tohme, Samir et Bouabdallah, Nizar.
2006.
« An approach for mobility modeling - Towards an efficient mobility management support in future wireless networks ».
In IEEE/IFIP Network Operations and Management Symposium (NOMS) (Vancouver, BC, Canada, Apr. 03-07, 2006)
pp. 316-326.
Institute of Electrical and Electronics Engineers Inc..
Langar, Rami, Tohme, Samir, Bouabdallah, Nizar et Pujolle, Guy.
2006.
« On the analysis of micro mobile mpls access networks: the fast handoff and the forwarding chain mechanisms ».
In 3rd IEEE Consumer Communications and Networking Conference (CCNC) (Las Vegas , NV, USA, Jan. 08-10, 2006)
pp. 793-797.
IEEE.
Lapalme, J., Aboulhamid, E. M., Nicolescu, G. et Rousseau, F..
2006.
« Separating modeling and simulation aspects in hardware/software system design ».
In 2006 International Conference on Microelectronics (Dhahran, Saudi Arabia, Dec. 16-19, 2006)
pp. 202-205.
Piscataway, NJ, USA : IEEE.
Laporte, Claude Yvon, April, Alain et Renault, A..
2006.
« Applying ISO/IEC software engineering standards in small settings: historical perspectives and initial achievements ».
In Proceedings of SPICE 2006 (Luxembourg, Luxembourg, May 4-5, 2006)
pp. 57-62.
Latombe, Guillaume, Granger, Éric et Dilkes, Fred A..
2006.
« Fast incremental techniques for learning production rule probabilities in radar electronic support ».
In IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) (Toulouse, France, May 14-19, 2006)
pp. 773-776.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Latombe, Guillaume, Granger, Éric et Dilkes, Fred A..
2006.
« Maximum likelihood and the graphical em algorithm ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, ON, Canada, May 7-10, 2006)
pp. 1475-1480.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Le-Huy, Philippe, Guérette, Sylvain, Dessaint, Louis-A. et Le-Huy, Hoang.
2006.
« Dual-step real-time simulation of power electronic converters using an FPGA ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1548-1553.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Le-Huy, Philippe, Guerette, Sylvain, Dessaint, Louis-A. et Le-Huy, Hoang.
2006.
« Real-time simulation of power electronics in power systems using an FPGA ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 873-877.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Lemaire, R., Therssen, E. et Desgroux, P..
2006.
« Détection des suies et des hydrocarbures aromatiques polycycliques dans des flammes jet de méthane et de kérosène par couplage de l’incandescence et de la fluorescence induites par laser ».
In 10ème Congrès Francophone de Techniques Laser (CFTL) (Toulouse, France, 19-22 sept. 2006)
Lemay, M., Arrott, M. et François, V..
2006.
« The grid resource model for instruments and sensors ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2824-2829.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Lemay, M., Suryn, Witold et Brown, S..
2006.
« Softswitch multicriteria analysis for software quality based on IPCC reference architecture ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3299-3304.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Lemieux, Sylvain, Beaudry, Julien et Blain, Michel.
2006.
« Force control test bench for underwater vehicle-manipulator system applications ».
In 32nd Annual Conference on IEEE Industrial Electronics (IECON) (Paris, France, Nov. 6-10, 2006)
pp. 4036-4042.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Lessard, Simon, Bonev, Ilian, Bigras, Pascal, Durand, Louis-Gilles, Soulez, Gilles, Cloutier, Guy et de Guise, Jacques A..
2006.
« Parallel robot for medical 3D-ultrasound imaging ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3102-3107.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Levasseur, A., Tétreault, P., De Guise, Jacques A., Nuño, Natalia et Hagemeister, Nicola.
2006.
« Comparison between geometric and functional method for the estimation of the glenohumeral rotation center ».
In Proceedings of the 5th World Congress of Biomechanics : Munich, Germany, July 29-August 4, 2006 (Munich, Germany, Jul. 29-Aug. 4, 2006)
Bologna : Medimond International proceedings.
Li, Y., Aissaoui, Rachid, Boivin, K., de Guise, Jacques A., Duval, N., Hagemeister, Nicola, Pontbriand, R., Roy, A. et Turcot, K..
2006.
« 3D kinematic pattern classification of healthy knee joints and comparison with osteoarthritis joints ».
In Annual Meeting of the Canadian Orthopaedic Association (Toronto, ON, Canada, June 2-4, 2006)
1139 – 1145.
Montreal, Canada : Canadian Orthopaedic Association.
Li, Y., Aissaoui, Rachid, Turcot, K., Boivin, K., Hagemeister, Nicola et de Guise, Jacques A..
2006.
« Classification of gait patterns using kinematic, kinetic and acceleration variables ».
In Proceedings of the 5th World Congress of Biomechanics : Munich, Germany, July 29-August 4, 2006 (Munich, Germany, Jul. 29-Aug. 4, 2006)
Bologna : Medimond International proceedings.
Liu, Zhaoheng et Payre, G..
2006.
« Chatter onset prediction of doubly regenerative cylindrical grinding process ».
In Proceedings of the Second International Conference on Dynamics, Vibration and Control (Beijing, China, Aug. 23-26, 2006)
Lopez-Herrejon, Roberto, Batory, Don et Lengauer, Christian.
2006.
« A disciplined approach to aspect composition ».
In PEPM '06 : Proceedings of the 2006 ACM SIGPLAN Symposium on Partial Evaluation and Semantics-Based Program Manipulation (Charleston, SC, USA, Jan. 09-10, 2006)
pp. 68-77.
Association for Computing Machinery.
Lorin, Emmanuel, Ben Haj Ali, Ali et Soulaïmani, Azzeddine.
2006.
« An accurate positivity preserving scheme for the spalart-allmaras turbulence model. application to aerodynamics ».
In 36th AIAA Fluid Dynamics Conference and Exhibit (San Francisco, CA, USA, June 5-8, 2006)
Coll. « AIAA paper »
pp. 2270-2301.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Loyka, S. et Gagnon, François.
2006.
« Analytical BER analysis of the V-BLAST in a rayleigh fading channel ».
In IEEE Wireless Communications and Networking Conference (WCNC) (Las Vegas, NV, USA, April 3-6, 2006)
pp. 827-832.
New York, NY, USA : Institute of Electrical and Electronics Engineers.
Loyka, Sergey et Gagnon, François.
2006.
« On the peak factor of sampled and continuous signals ».
In IEEE 64th Vehicular Technology Conference (VTC) (Montreal, Canada, Sept. 25-28, 2006)
pp. 1355-1358.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Maâlaoui, K., Saidane, L. A. et Zhani, Mohamed Faten.
2006.
« FP/EDF versus FP/FIFO local scheduling in a bluetooth piconet ».
In Proceedings of the IASTED International Conference on COMMUNICATION SYSTEMS AND APPLICATIONS Part of the Sixth IASTED International Multi-Conference on WIRELESS AND OPTICAL COMMUNICATIONS (Banff, AB, Canada, July 03-05, 2006)
pp. 168-173.
International Association of Science and Technology for Development.
Mandache, L. et Al Haddad, Kamal.
2006.
« High precision modeling of nonlinear lossy magnetic devices ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2671-2676.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Mandache, L. et Al Haddad, Kamal.
2006.
« High precision modeling of saturable transformers used as voltage regulators ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2695-2699.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Martorell, F., Isalgue, A., Torra, V., Lovey, F. C. et Terriault, Patrick.
2006.
« SMA a tool for passive damping in civil buildings ».
In 4th World Conference on Structural Control and Monitoring (4WCSCM) (San Diego, CA, USA, July 11-13, 2006)
Masmoudi, Anis, Champagne, Roger et Paquette, Gilbert.
2006.
« Recherche des composants logiciels référencés par un modèle ontologique ».
In Proceedings of the Atelier sur les Objets, Composants et Modèles dans l'Ingénierie des Systèmes d'Information (OCM-SI), 24e Congrès sur l'Informatique des Organisations et Systèmes d'Information et de Décision (INFORSID) (Hammamet, Tunisie, 31 mai-3 juin 2006)
pp. 1-16.
Masmoudi, Anis, Paquette, Gilbert et Champagne, Roger.
2006.
« Implémentation à l'aide de BPEL de trois processus d'agrégation de composants, dirigée par les modèles ».
In Actes du XXIVeme Congres INFORSID 2006 (Hammamet, Tunisia, May 31 - June 4, 2006)
Ventabren, France : INFORSID.
Masson, P., Micheau, P., Pasco, Y., Thomas, Marc, Brailovski, Vladimir, Meunier, M., Peter, Y.-A, Song, I.-H, Mateescu, D., Misra, A., Mrad, N. et Pinsonneault, J..
2006.
« Smart technologies for structural health monitoring of aerospace structures ».
In International Workshop on Smart Materials and Structures (CanSmart) (Toronto, ON, Canada, Oct. 12-13, 2006)
Kingston, Canada : CanSmart Group.
Meghoufel, Ali, de Guise, Jacques A., Crevier-Denoix, Nathalie et Cloutier, Guy.
2006.
« 3D tissue characterization of the equine superficial digital flexor tendons from in vivo ultrasound images ».
In IEEE Ultrasonics Symposium (Vancouver, Canada, Oct. 2-6, 2006)
pp. 2080-2083.
New York, NY, USA : Institute of Electrical and Electronics Engineers.
Melhado, S. B..
2006.
« Modelos para a gestão de empresas de projeto: algumas propostas em busca de evoluções ».
In Anais do Seminário internacional nutau´2006 : Inovações tecnológicas & sustentabilidade (São Paulo, Brazil, Oct. 09-13, 2006)
São Paulo : FAUUSP.
Melhado, S. Burrattino et Moraes Mesquita, M. J. de.
2006.
« Project management: towards an emphasis in `conception-operation` interface ».
In CIB W107 Construction in Developing Countries International Symposium : Construction in Developing Economies : New Issues and Challenges (Santiago, Chili, Jan. 18-20, 2006)
CIB.
Melhado, Silvio B. et Croitor, Eduardo P. N..
2006.
« O papel do projeto e da coordenação de projetos na reabilitação de edifícios: o caso da reabilitação de condomínios de edifícios residenciais ».
In Anais do II Congresso internacional de recuperação, manutenção e restauração de edifícios (Rio de Janeiro, Brazil
Rio de Janeiro : Universidade Federal do Rio de Janeiro.
Melhado, Silvio, Adesse, Eliane, Bunemer, Ricardo, Levy, Maria Cecilia, Luongo, Mario et Manso, Marco Antonio.
2006.
« A gestão de projetos de edificações e o escopo de serviços para coordenação de projetos ».
In Anais do VI Seminário Internacional da LARES (Sao Paulo, Brazil
LARES.
Melhem, Khoder, Saad, Maarouf et Abou, Séraphin-Chally.
2006.
« From unconstrained motion control to constrained case for holonomic mechanical systems ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 364-371.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Melhem, Khoder, Saad, Maarouf et Abou, Séraphin-Chally.
2006.
« Linearization by redundancy and stabilization of nonlinear dynamical systems: a state transformation approach ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 61-68.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Meniru, Kene, Rivard, Hugues et Bédard, Claude.
2006.
« Digitally capturing design solutions ».
In Proceedings of the Joint CIB W78, W102, ICCCBE, ICCC, and DMUCE International Conference on Computing and Decision Making in Civil and Building Engineering (Montreal, QC, Canada, June 14-16, 2006)
pp. 3726-3735.
Mercier, Stéphane, Abran, Alain, Lavoie, Michel et Champagne, Roger.
2006.
« Unified software method: towards a method of measurement of the necessary changes to software in maintenance ».
In Applied Software Measurement : Proceedings of the International Workshop on Software Metrics and DASMA Software Metrik Kongress IWSM/MetriKon 2006, 2.-3. November 2006, Hasso-Plattner-Institut Potsdam, Germany (Postdam, Germany, Nov. 2-4, 2006)
pp. 133-146.
Shaker Verlag.
Mercier, Stéphane, Lavoie, Michel et Champagne, Roger.
2006.
« Unified software method: an engineering approach to software engineering ».
In 30th Annual IEEE/NASA Software Engineering Workshop (SEW) (Columbia, MD, USA, April 24-28, 2006)
pp. 89-96.
Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Mezghani, N., Deschênes, S., Godbout, B., Branchaud, D. et de Guise, Jacques A..
2006.
« Spinal vertebrae edge detection by anisotropic filtering and a local canny-deriche edge detector ».
In 3rd International Symposium on Image/Video Communication (ISIVC) (Hammamet, Tunisia, Sept. 13-15, 2006)
Mezghani, N., Husse, S., Boivin, K., Turcot, K., Hagemeister, Nicola, Aissaoui, Rachid et de Guise, Jacques A..
2006.
« Asymptomatic and knee osteoarthristis automatic gait pattern analysis using a wavelet representation of kinetic data and the nearest neighbor classifier ».
In 15th International Conference on Mechanics in Medicine and Biology (ICMMB) (Singapore, Singapore, Dec. 6-8, 2006)
pp. 61-64.
Michaud, J.P., Songmene, Victor et Tahan, Antoine.
2006.
« Aluminium alloy 7050 T7451 thin wall high-speed machining parts study ».
In 3th International Symposium on Aerospace Materials and Manufacturing Processes: Emerging Materials, Manufacturing, and Repair Techniques (Montreal, QC, Canada, Oct. 2-4, 2006)
Canada : The Metallurgy and Materials Society.
Milgram, Jonathan, Cheriet, Mohamed et Sabourin, Robert.
2006.
« "One against one" or "one against all" : which one is better for handwriting recognition with SVMs? ».
In 10th International Workshop on Frontiers in Handwriting Recognition (IWFHR) (La Baule, France, Oct. 23-26, 2006)
pp. 181-186.
Mnif, Kais, Rong, B. et Kadoch, Michel.
2006.
« Throughput analysis based on one hop transmission in wireless ad hoc networks ».
In IEEE International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob) (Montreal, Canada, June 19-21, 2006)
pp. 402-407.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Moha, Naouel, Guéhéneuc, Yann-Gäel et Leduc, Pierre.
2006.
« Automatic generation of detection algorithms for design defects ».
In 21st IEEE/ACM International Conference on Automated Software Engineering (ASE) (Tokyo, Japan, Sept. 18-22, 2006)
pp. 297-300.
Institute of Electrical and Electronics Engineers.
Molinié, Luis, Olleros, Xavier et Abran, Alain.
2006.
« The different Linux's games ».
In Latin-American Council of the School of Administration (CLADEA) (Montpellier, France, Sept.10-13, 2006)
Montminy, Steeve, Dupuis, Erick et Champliaud, Henri.
2006.
« Mechanical design of a hopper robot for planetary exploration using SMA as a unique source of power ».
In AIAA 57th International Astronautical Congress (IAC) (Valencia, Spain, Oct. 2-6, 2006)
pp. 5288-5297.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Mora, Rodrigo, Bédard, Claude et Rivard, Hugues.
2006.
« Interactive computer support for the conceptual design of building structures ».
In Building on IT : Joint International Conference 14-16 June 2006 in Montreal, Canada (Montreal, QC, Canada, June 14-16, 2006)
pp. 3539-3548.
Mora, Rodrigo, Rivard, Hugues, Juchmes, Roland et Leclercq, Pierre.
2006.
« From architectural sketches to feasible structural systems ».
In Design Computing and Cognition ’06 (Eindhoven, Netherlands, July 10-12, 2006)
pp. 675-694.
Netherlands : Springer.
Mora, Rodrigo, Rivard, Hugues, Parent, Steve et Bédard, Claude.
2006.
« Interactive knowledge-based assistance for conceptual design of building structures ».
In Advances in Engineering Structures, Mechanics &Construction : Proceedings of an International Conference on Advances in Engineering Structures, Mechanics & Construction, held in Waterloo, Ontario, Canada, May 14--17, 2006 (Waterloo, Canada, May 14-17, 2006)
Coll. « Solid Mechanics and its Applications », vol. 140.
pp. 571-582.
Netherlands : Springer.
Morales, M. et Bauer, Dominique Bernard.
2006.
« Fatigue and remaining life assessment of steel bridges more than 50 years old ».
In 7th International Conference on Short and Medium Span Bridges (Montreal, QC, Canada, Aug. 23-25, 2006)
pp. 1-9.
Montreal, Quebec : Canadian Society for Civil Engineering.
Morcous, G. et Rivard, Hugues.
2006.
« Service life prediction of low-slope roofing components in buildings ».
In Building Integration Solutions, Architectural Engineering National Conference (Omaha, NE, USA, March 29-April 1, 2006)
Reston, VA, USA : American Society of Civil Engineers.
Morency, François, Hallé, Stéphane et Dreger, Slawomir.
2006.
« Design of a small snow gun for limited area using CFD ».
In ASME 8th Biennal Conference on Engineering Systems Design and Analysis (ESDA) (Torino, Italy, Jul. 4-7, 2006)
pp. 657-665.
New York, NY, USA : American Society of Mechanical Engineers.
Mrabet, M., Fnaiech, F. et Al Haddad, Kamal.
2006.
« Convergence analysis of a general nonlinear predictive adaptive controllers ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 405-410.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Msheik, Hamdam, Abran, Alain, Mcheick, Hamad, Touloumis, Dimitrios et Khelifi, Adel.
2006.
« CoMet : a tool using CUMM to measure unused components members ».
In IEEE International Conference on Computer Systems and Applications (Sharjah, United Arab Emirates, March 8, 2006)
pp. 697-703.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Msheik, Hamdan et Abran, Alain.
2006.
« Extending CSCM to support interface versioning ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3311-3315.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Nadeau Beaulieu, Michel, Botez, Ruxandra, Hiliuta, A. et Popov, A. V..
2006.
« Ground dynamics model validation by use of landing flight test data ».
In AIAA Modeling and Simulation Technologies Conference (Keystone, CO, USA, Aug. 21-24, 2006)
Coll. « AIAA paper », vol. AIAA 2006-6811.
pp. 1226-1247.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Nerguizian, Vahé et Nerguizian, Chahé.
2006.
« E-learning for MEMS graduate course - challenges, difficulties and benefits ».
In IEEE International Conference on E-Learning in Industrial Electronics (Hammamet, Tunisia, Dec. 18-20, 2006)
pp. 177-180.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Nerguizian, Vahé et Rafaf, Mustapha.
2006.
« E-learning project based approach for analog electronic circuits ».
In IEEE International Conference on E-Learning in Industrial Electronics (Hammamet, Tunisia, Dec. 18-20, 2006)
pp. 181-184.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ngô, Anh Dung, Tran, N.D.P., Lamarche, Louis et Le-Huy, Phieu.
2006.
« Développement d’un système de protection pour les presses-plieuses basé sur la vision. Partie I: algorithme ».
In Acte du Colloque de l’ACFAS sur la Recherche en SST : Anciens Risques et Enjeux Actuels, Symposium – Sécurité des Équipements et Procédés Industriels (Montréal, QC, Canada, 17-19 mai 2006)
Niethammer, M., Estepar, R. S. J., Bouix, S., Shenton, M. et Westin, C. F..
2006.
« On diffusion tensor estimation ».
In International Conference of the IEEE Engineering in Medicine and Biology Society (New York City, NY, USA, Aug. 30-Sept. 03, 2006)
pp. 2622-2625.
IEEE.
Niethammer, Marc, Bouix, Sylvain, Westin, Carl-Fredrik et Shenton, Martha E..
2006.
« Fiber bundle estimation and parameterization ».
In Medical Image Computing and Computer-Assisted Intervention – MICCAI 2006 : 9th International Conference, Proceedings, Part II (Copenhagen, Denmark, Oct. 01-06, 2006)
Coll. « Lecture Notes in Computer Science », vol. 4191.
pp. 252-259.
Springer Verlag.
Njoya, D.R., Khettabi, R., Songmene, Victor et Masounave, Jacques.
2006.
« Influence des matériaux et des procédés d'usinage sur les émissions de poussières fines ».
In 45th International Conference of Metallurgists (Montréal, QC, Canada, Oct. 1-4, 2006)
Montreal, Canada : Institut canadien des mines.
Nollet, Marie-José, Lefebvre, K. et Karbassi, A..
2006.
« Appréciation des outils actuels concernant l'évaluation de la vulnérabilité sismique des bâtiments à caractère historique ».
In 1ère Conférence Internationale Spécialisée sur le Génie des Structures (SCGC) (Calgary, AB, Canada, 23-26 mai 2006)
Noumeir, Rita.
2006.
« IHE cross-enterprise document sharing for imaging: design challenges ».
In Medical Imaging 2006 : PACS and Imaging Informatics (San Diego, CA, USA, Feb. 12-14, 2006)
Coll. « Proceedings of SPIE », vol. 6145.
Bellingham, WA, USA : SPIE - The International Society for Optical Engineering.
Nuño, Natalia, Pérez, MA., Plamondon, D., Madrala, A., Garcìa-Aznar, JM. et Doblaré, M..
2006.
« Evolution of residual stresses and temperature during polymerization of bone cement of an idealized hip implant: Numerical results ».
In Proceedings of the 5th World Congress of Biomechanics : Munich, Germany, July 29-August 4, 2006 (Munich, Germany, Jull. 29 -Aug. 4, 2006)
Bologna : Medimond International proceedings.
Oliveira, L. A. et Melhado, S. B..
2006.
« Vedação vertical em componentes leves integrada à estrutura metálica de edifício ».
In Anais do III Congresso Internacional da Construção Metálica (CICOM) (Ouro Preto, Brazil, April 25-26, 2006)
Oliveira, Luciana Alves, Borges, Carlos Alberto M et Melhado, Silvio Burratino.
2006.
« Sistemas de gestão integrados: análise em uma empresa-construtora ».
In XI Encontro Nacional de Tecnologia do Ambiente Construído (ENTAC) (Florianópolis, Brasil, Aug. 23-25, 2006)
pp. 2526-2535.
Porto Alegre : ANTAC.
Oliveira, O. J. et Melhado, S. B..
2006.
« Serviços associados ao projeto de edificações ».
In Anais do Seminário Internacional NUTAU´2006 : Inovações Tecnológicas & Sustentabilidade (São Paulo, Brazil, Oct. 09-13, 2006)
São Paulo : FAUUSP.
Oliveira, Otavio J. et Melhado, Silvio Burratino.
2006.
« Gestão de pessoas: um desafio às empresas de projeto ».
In XIII SIMPEP Simpósio de Engenharia de Produção (Bauru, Sao Paulo, Brasil, Nov. 06-08, 2006)
Universidade Estadual Paulista Julio de Mesquita Filho (UNESP).
Ouahabi, A., Thomas, Marc et Lakis, A.A..
2006.
« Detection of damages in beams and composite plates by harmonic excitation and time-frequency analysis ».
In dings of the 3rd European Workshop - Structural Health Monitoring 2006 (Granada, Spain, July 5-7, 2006)
pp. 775-782.
Lancaster, PA, USA : Destech publications inc.
Ouahabi, A., Thomas, Marc et Lakis, A.A..
2006.
« Détection de fissures de respiration de fatigue par excitation harmonique et analyse temps-fréquence ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montréal, QC, Canada, 25-27 oct. 2006)
pp. 460-472.
Calgary, Canada : ACVM.
Ounejjar, Youssef et Al Haddad, Kamal.
2006.
« New line currents and neutral point balancing technique of three-level three-phase NPC converter ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1436-1441.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ouquelle, Hassan, Dessaint, Louis-A., Champagne, Roger et Sybille, Gilbert.
2006.
« Using power electronics to increase performance and extend the applications range of a single-phase induction machine ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2382-2388.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ouwerkerk, J. et Abran, Alain.
2006.
« An evaluation of the design of use case points (UCP) ».
In Proceedings of the International Conference on Software Process and Product Measurement : MENSURA 2006 (Cadiz, Spain, Nov. 6-8, 2006)
pp. 83-97.
Servicio de Publicaciones de la Universidad de Cádiz.
Ovono Zue, Aslain et Chandra, Ambrish.
2006.
« Grid connected photovoltaic interface with VAR compensation and active filtering functions ».
In International Conference on Power Electronics, Drives and Energy Systems (PEDES) (New Delhi, India, Dec. 12-15, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Paquette, D-A, April, Alain et Abran, Alain.
2006.
« Assessment results using the software maintenance maturity model (S3m) ».
In International Workshop on Software Measurement (IWSM-Metrikon) (Postdam, Germany, Nov. 2-3, 2006)
pp. 147-160.
Shaker-Verlag.
Parent, Steve, Rivard, Hugues et Mora, Rodrigo.
2006.
« Acquisition and modeling of conceptual structural design knowledge ».
In Building on IT : Joint International Conference 14-16 June 2006 in Montreal, Canada (Montreal, QC, Canada, June 14-16, 2006)
pp. 3519-3528.
Petit, Yvan, Dupuis, Karine et Mérette, Jean-Sébastien.
2006.
« Relationship between apparent density and mechanical behaviour of FDM parts ».
In Multiscale behavior of materials and structures : analytical, numerical and experimental simulation (Porto, Portugal, July 19-22, 2006)
pp. 77-82.
Porto, Portugal : Publindústria.
Pham Van Bang, D., Bertrand, F. et Ovarlez, G..
2006.
« Approche expérimentale par IRM et numérique par EF de la sédimentation et de la consolidation des vases ».
In 41ème Colloque du Groupe Français de Rhéologie : Rhéologie des suspensions de l'environnement et de l'industrie (Cherbourg, France, 18-20 oct. 2006)
pp. 23-26.
GRF.
Pham Van Bang, D., Faure, P. et Bertrand, F..
2006.
« Approche expérimentale par IRM et numérique par EF de la sédimentation et de la consolidation de la vase ».
In JSI 2006 : Journees des Sciences de L'ingenieur 2006, Marne La Vallee, France, 5-6 Decembre 2006 (Marne la Vallée, France, 5-6 déc. 2006)
pp. 435-440.
Laboratoire Central des Ponts et Chausees (LCPC).
Pham Van Bang, D., Lefrançois, E., Ovarlez, G. et Bertrand, F..
2006.
« MRI experimental and 1D FE-FCT numerical investigation of sedimentation and consolidation’ ».
In Proceedings of the 7th International Conference on Hydroinformatics 2006 : 4-8 September 2006, Nice, France (Nice, France, Sept. 04-08, 2006)
pp. 497-504.
Chennai : Research Publishing Services.
Pham Van Bang, Damien, Lefrançois, Emmanuel, Sergent, Philippe et Bertrand, François.
2006.
« Approche expérimentale par IRM et modélisation de la sédimentation et de la consolidation de la vase ».
In IXèmes Journées Nationales Génie Civil – Génie Côtier (Brest, France, 12-14 sept. 2006)
pp. 409-417.
Plamondon, D., Winzenrieth, R., Lavigne, M., Vendittoli, PA. et Nuño, Natalia.
2006.
« Effects of hip resurfacing components positioning on range of motion ».
In Proceedings of the 5th World Congress of Biomechanics : Munich, Germany, July 29-August 4, 2006 (Munich, Germany, Jul. 9-Aug. 4, 2006)
Bologna : Medimond International proceedings.
Planat, V. et Kara, N..
2006.
« SIP transfer over 3G deployed networks: Tests suite and performances analysis ».
In 5th IASTED International Conference on Communications, Internet, and Information Technology (CIIT) (St. Thomas, VI, USA, Nov. 29-Dec. 01, 2006)
pp. 25-30.
Acta Press.
Poiré, Vincent, Lemieux, Sylvain, Bigras, Pascal et Blain, Michel.
2006.
« Migration procedure of control laws from a graphical simulation environment to a robotic framework ».
In Proceedings of the Eighth IASTED International Conference on Control and Applications (Montreal, Canada, May 24-26, 2006)
pp. 165-170.
Calgary, Canada : ACTA Press.
Poitau, G. et Kouki, Ammar B..
2006.
« MILC : modified implementation of the LINC concept ».
In IEEE MTT-S International Microwave Symposium Digest (San Francisco, CA, USA, June 11-16, 2006)
pp. 1883-1886.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Pouliot, Nadia, Carter, Alan et Langlois, Pierre.
2006.
« Mesure en continu du bruit pneu-chaussée sur le réseau routier du ministère des transports du Québec = Close-proximity measurement of tire-pavement noise on the ministry of transportation of Quebec's road network ».
In TAC/ATC 2006 - 2006 Annual Conference and Exhibition of the Transportation Association of Canada: Transportation Without Boundaries (Charlottetown, PE, Canada, Sept. 17-20, 2006)
Transportation Association of Canada (TAC).
Preiss, R. et Gabrea, Marcel.
2006.
« Modeling of the PSTN channel and multireferences training in robust speech recognition ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 589-592.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Preiss, R. et Gabrea, Marcel.
2006.
« Modélisation du canal téléphonique PSTN et apprentissage multiréférences en reconnaissance robuste de la parole ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 2116-2119.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Prokoshkin, S., Khmelevskaya, I., Dobatkin, S., Trubitsyna, I., Tatyanin, E., Turenne, S., Brailovski, Vladimir, Stolyarov, V. et Prokofiev, E..
2006.
« Thermomechanical conditions for nanocrystalline structure formation and functional properties of severely deformed Ti-Ni shape memory alloys ».
In International Symposium on Ultrafine Gained Materials (San Antonio, TX, USA, Mar. 12-16, 2006)
pp. 301-306.
Warrendale, PA, USA : The Minerals, Metals & Materials Society.
Radtke, P.V.W., Wong, Tony et Sabourin, Robert.
2006.
« An evaluation of over-fit control strategies for multi-objective evolutionary optimization ».
In International Joint Conference on Neural Networks (IJCNN) (Vancouver, Canada, Jul. 16-21, 2006)
pp. 3327-3334.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Radtke, Paulo V. W., Sabourin, Robert et Wong, Tony.
2006.
« Classification system optimization with multi-objective genetic algorithms ».
In 10th International Workshop on Frontiers in Handwriting Recognition (IWFHR) (La Baule, France, Oct. 23-26, 2006)
pp. 331-336.
Rahmani, S., Al Haddad, Kamal et Kanaan, H. Y..
2006.
« Average modeling and hybrid control of a three-phase series hybrid power filter ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 919-924.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rahmani, Salem et Al Haddad, Kamal.
2006.
« A single phase multilevel hybrid power filter for electrified railway applications ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 925-930.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rahmani, Salem, Al Haddad, Kamal et Fnaiech, Farhat.
2006.
« A three-phase shunt active power filter for damping of harmonic propagation in power distribution systems ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1760-1764.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Ramachandran, V., Gargour, C. S. et Ramachandran, R. P..
2006.
« Two-dimensional digital filters possessing variable magnitude characteristics starting from A 1-D monotonic response ».
In 2006 IEEE Mountain Workshop on Adaptive and Learning Systems (Logan, UT, USA, July 24-26, 2006)
pp. 19-23.
Piscataway, NJ, USA : IEEE.
Ramudhin, Amar, Chan, E., Banziane, R. et Mokadem, A..
2006.
« Modeling and optimization of health care processes ».
In IIE Annual Conference and Exposition (Orlando, FL, USA, May 20-24, 2006)
Norcross, USA : Institute of Industrial Engineers.
Ramudhin, Amar, Paquet, Marc, Artiba, Abdelhakim, Dupré, P., Varvaro, D. et Thomson, V..
2006.
« Improving logistics activities for maintenance, repair and overhaul using RFID technology ».
In Logistique & Transport (LT) (Hammamet, Tunisia, Apr. 30-May 2, 2006)
Ramudhin, Amar et Pronovost, Julie.
2006.
« Including kitting decisions in the design of supply chains for the aeronautic industry ».
In 12th IFAC Symposium on Information Control Problems in Manufacturing (INCOM) (Saint-Étienne, France, May 17-19, 2006)
Laxenburg, Australia : International Federation of Automatic Control.
Rezki, Z., Cotruta, B., Haccoun, David et Gagnon, François.
2006.
« Finite diversity multiplexing tradeoff over spatially correlated channels ».
In IEEE 64th Vehicular Technology Conference (VTC) (Montreal, Canada, Sept. 25-28, 2006)
pp. 494-498.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Rezki, Zouheir, Haccoun, David, Gagnon, François et Ajib, Wessam.
2006.
« On the impact of spatial correlation on the finite diversity-multiplexing tradeoff ».
In 3rd International Symposium on Wireless Communication Systems (ISWCS) (Valencia, Espagne, Sept. 05-08, 2006)
pp. 214-218.
IEEE.
Rhéaume, F.-É, Champliaud, Henri et Liu, Zhaoheng.
2006.
« Simulating strain wave gearing torsional stiffness using the finite element method ».
In ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
Ribeiro, Richardson, Enembreck, Fabrício et Koerich, Alessandro L..
2006.
« A hybrid learning strategy for discovery of policies of action ».
In Advances in Artificial Intelligence - IBERAMIA-SBIA 2006 : 2nd International Joint Conference, 10th Ibero-American Conference on AI, 18th Brazilian AI Symposium, Ribeirão Preto, Brazil, October 23-27, 2006. Proceedings (Ribeirão Preto, Brazil, Oct. 23-27, 2006)
Coll. « Lecture Notes in Computer Science », vol. 4140.
pp. 268-277.
Springer Berlin Heidelberg.
Ribeiro, Richardson, Koerich, Alessandro L. et Enembreck, Fabrício.
2006.
« Uma nova metodologia para avaliaçao da performance de algoritmos baseados em aprendizagem por reforço ».
In Anais do XXVI Congresso da SBC. SEMISH XXXIII Seminário Integrado de Software e Hardware (Campo Grande, Brasil, July 14-20, 2006)
pp. 433-446.
Riggi, Frank, Toews, Matthew et Arbel, Tal.
2006.
« Fundamental matrix estimation via TIP - Transfer of Invariant Parameters ».
In 18th International Conference on Pattern Recognition, 2006. ICPR 2006 (Hong Kong, China, Aug. 20-24, 2006)
pp. 21-24.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Inc..
Rivard, Dominique, Granger, Éric et Sabourin, Robert.
2006.
« Feature selection techniques for classification of satellite images with fuzzy ARTMAP neural networks ».
In Intelligent Engineering Systems through Artificial Neural Networks (Saint-Louis, MO, USA, Nov. 5-8, 2006)
pp. 479-486.
ASME.
Rivard, Hugues.
2006.
« Computer assistance for sustainable building design ».
In Intelligent Computing in Engineering and Architecture 13th EG-ICE Workshop 2006, Ascona, Switzerland, June 25-30, 2006, Revised Selected Papers (Ascona, Switzerland, June 25-30, 2006)
Coll. « Lecture Notes in Computer Science », vol. 4200.
pp. 559-575.
Berlin, Germany : Springer-Verlag.
Rolim, Carlos Oberdan, Koch, Fernando Luis, Assuncao, Marcos et Westphall, Carlos Becker.
2006.
« Towards a grid of sensors for telemedicine ».
In 19th IEEE International Symposium on Computer-Based Medical Systems (CBMS) (Salt Lake City, UT, USA, June 22-23, 2006)
pp. 485-489.
Institute of Electrical and Electronics Engineers Inc..
Roy, Steven et Liu, Zhaoheng.
2006.
« Modeling and simulation of a parametric vehicle for suspension and performance analysis ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 23-26, 2006)
pp. 66-82.
Calgary, Canada : ACVM.
Ruelland, François et Al Haddad, Kamal.
2006.
« Simulation and optimization of subway tunnel profiles ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2659-2664.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Samson, C., Holladay, J. S., Lee, J., Draisey, S. et Lim, D..
2006.
« Electromagnetic induction sounder for subsurface mapping of resistivity and magnetic susceptibility on Mars ».
In 13th Canadian Astronautics Conference of the Canadian Aeronautics and Space Institute (ASTRO) (Montreal, QC, Canada, Apr. 25-27, 2006)
Canadian Aeronautics and Space Institute.
Sanchez, Edgar N., Gaytan, Armando et Saad, Maarouf.
2006.
« Decentralized neural identification and control for robotics manipulators ».
In IEEE International Symposium on Intelligent Control (Munich, Germany, Oct. 4-6, 2006)
pp. 1614-1619.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Sandhu, Ajit Singh, Ramachandran, Venkat et Gargour, Christian.
2006.
« A technique for generation of 2-D analog and digital lowpass filters with monotonic amplitude-frequency response ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 500-504.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Santillo, Luca et Abran, Alain.
2006.
« Software reuse evaluation based on functional similarity in COSMIC-FFP size components ».
In Software Measurement European Forum (SMEF) (Rome, Italy, May 10-12, 2006)
pp. 167-176.
Sassi, Sadok, Badri, Bechir et Thomas, Marc.
2006.
« "TALAF" and "THIKAT" as innovative time domain indicators for tracking BALL bearings ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006)
pp. 404-419.
Calgary, Canada : ACVM.
Saussié, David, Saydy, Lahcen, Akhrif, Ouassima et Bérard Chiappa, Caroline.
2006.
« Self-scheduling robust pitch rate control based on multi-model eigenstructure assignment and guardian maps robustness assessment ».
In 15th IFAC Symposium on Robust Control Design (ROCOND) (Toulouse, France, Jul. 5-7, 2006)
pp. 41-46.
Laxenburg, Australia : International Federation of Automatic Control.
Sedraoui, K., Al Haddad, Kamal et Olivier, G..
2006.
« Flicker compensation in arc furnace power systems using the UPFC ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1864-1867.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Séguin, Normand, Dupuis, Renaud Loiselle, Abran, Alain et Dupuis, Robert.
2006.
« Les principes du génie logiciel s'appliquent-ils au logiciel libre? ».
In 74e Congrès de l’ACFAS : Le savoir, trame de la modernité (Montréal, QC, Canada, 15-19 mai 2006)
Shaik, I., Abdelmoez, W., Gunnalan, R., Mili, A., Fuhrman, C., Shereshevsky, M., Zeid, A. et Ammar, H. H..
2006.
« Using change propagation probabilities to assess quality attributes of software architectures ».
In IEEE International Conference on Computer Systems and Applications, 2006 (Dubai, United Arab Emirates, Mar. 8-11, 2006)
pp. 704-711.
IEEE.
Silla, C. N., Kaestner, C. A. A. et Koerich, Alessandro L..
2006.
« Automatic genre classification of Latin music using ensemble of classifiers ».
In Anais do XXVI Congresso da SBC. SEMISH XXXIII Seminário Integrado de Software e Hardware (Campo Grande, Brazil, July 14-20, 2006)
pp. 47-53.
Silla, Carlos N. Jr., Kaestner, Celso A A. et Koerich, Alessandro L..
2006.
« Time-space ensemble strategies for automatic music genre classification ».
In Advances in Artificial Intelligence - IBERAMIA-SBIA 2006 : 2nd International Joint Conference, 10th Ibero-American Conference on AI, 18th Brazilian AI Symposium, Ribeirão Preto, Brazil, October 23-27, 2006. Proceedings (Ribeirão Preto, Brazil, Oct. 23-27, 2006)
Coll. « Lecture Notes in Computer Science », vol. 4140.
pp. 339-348.
Springer Berlin Heidelberg.
Silva, Paulo F., Westphall, Carlos B., Westphall, Carla M. et D. Assunção, Marcos.
2006.
« Composition of a DIDS by integrating heterogeneous IDSs on grids ».
In Proceedings of the 4th International Workshop On Middleware For Grid Computing (MGC’06) (Melbourne, Australia, Nov. 27 - Dec. 01, 2006)
Association for Computing Machinery.
Singh, Bhim, Bhuvaneswari, G., Garg, Vipin et Chandra, Ambrish.
2006.
« Star connected autotransformer based 30-pulse AC-DC converter for power quality improvement in vector controlled induction motor drives ».
In IEEE Power India Conference (New Delhi, India, April 10-12, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Bhuvaneswari, G., Garg, Vipin, Chandra, Ambrish et Al Haddad, Kamal.
2006.
« A tapped delta autotransformer based 24-pulse AC-DC converter for variable frequency induction motor drives ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2046-2051.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Solanki, Jitendra et Chandra, Ambrish.
2006.
« Adaline based control of battery energy storage system for diesel generator set ».
In IEEE Power India Conference (New Delhi, India, April 10-12, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Singh, Bhim, Solanki, Jitendra, Chandra, Ambrish et Al Haddad, Kamal.
2006.
« A solid state compensator with energy storage for isolated diesel generator set ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1774-1778.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Soltani, G. Reza et David, Éric.
2006.
« Condition assessment of rotating machine winding insulation by analysis of charging and discharging currents ».
In Conference Record of the 2006 IEEE International Symposium on Electrical Insulation (ISEI) (Toronto, Canada, June 11-14, 2006)
pp. 336-339.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Soufi, K., Chatelain, Jean-François et Maranzana, Roland.
2006.
« A product change management system based on active features ».
In 16th CIRP International Design Seminar, Design & Innovation for Sustainable Society (Kananaskis, AB, Canada, July 16-19, 2006)
Stambollian, Anabel et Abran, Alain.
2006.
« Survey of automation tools supporting COSMIC-FFP-ISO 19761 ».
In International Workshop on Software Measurement (IWSM-Metrikon) (Postdam, Germany, Nov. 2-3, 2006)
pp. 435-454.
Shaker Verlag.
Stambollian, Anabel, Laporte, Claude Y., Renault, Alain, Desharnais, Jean-Marc et Habra, Naji.
2006.
« OWPL : a light model & methodology for initiating software process improvement ».
In 6th International Conference on Software Process Improvement and Capability dEtermination (SPICE) (Luxembourg, May 4-6, 2006)
pp. 97-105.
St-Jacques, Michèle, Assaf, Gabriel J. et Agal, Tarek.
2006.
« Évaluation du module de réaction des fondations stabilitées au ciment pour la conception des chaussées rigides ».
In Infra 2005 : 11e édition de la Semaine des infrastructures urbaines : recueil des résumés des conférences (Montréal, QC, Canada, 21-23 nov. 2005)
Montréal, Canada : Centre d'expertise et de recherche en infrastructures urbaines (CERIU).
St-Jacques, Michèle et Brosseaud, Yves.
2006.
« Coloured bituminous wearing courses in France, overview of uses ».
In 10th International Conference on Asphalt Pavements - August 12 to 17, 2006, Quebec City, Canada (Quebec, Canada, Aug. 12-17, 2006)
pp. 233-242.
White Bear Lake, MN : International Society for Asphalt Pavements.
St-Jacques, Michèle, Carter, Alan et Barco, César.
2006.
« Impact des températures de compactage sur les résultats de l'essai à l'orniérage ».
In Infra 2006 : recueil des communications, 12e édition de la Semaine des infrastructures urbaines : le Québec en chantier : optimiser les interventions = Infra 2006 : proceedings, 12th Annual Urban Infrastructure Week : Québec under construction : optimizin (Québec, QC, Canada, 20-22 nov. 2006)
Montréal, Canada : Centre d'expertise et de recherche en infrastructures urbaines (CERIU).
Stroian, V., Bourque, Pierre et Abran, Alain.
2006.
« Visualization - a key concept for multidimensional performance modeling in software engineering management ».
In IEEE International Conference on Automation, Quality and Testing, Robotics (Cluj-Napoca, Romania, May 25-28, 2006)
pp. 334-339.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Studd, D., Ernst, R.E., Samson, C. et Blinova, A..
2006.
« Using radar images from the Magellan mission to map sinuous lava flows on Venus ».
In 13th Canadian Astronautics Conference of the Canadian Aeronautics and Space Institute (ASTRO) (Montreal, QC, Canada, Apr. 25-27, 2006)
Canadian Aeronautics and Space Institute.
Sun, Yulan, Thomas, Marc et Masounave, Jacques.
2006.
« Amortissement des vibrations de torsion de rotors à l’aide de fluides électro-rhéologiques ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006)
pp. 344-369.
Calgary, Canada : ACVM.
Suryn, Witold, Stambollian, A., Dormeux, J-C. et Bégnoche, L..
2006.
« Software quality engineering - where to find it in Software Engineering Body of Knowledge (SWEBOK) ».
In 14th International Software Quality Management & INSPIRE Conference (SQM) (Southampton, Hampshire, UK, Apr. 10-12, 2006)
Tadj, Chakib, Hina, Manolo Dulva, Ramdane-Cherif, Amar et Ngantchaha, Ghislain.
2006.
« The LATIS pervasive patient subsystem: towards a pervasive healthcare system ».
In International Symposium on Communications and Information Technologies (ISCIT) (Bangkok, Thaïland, Oct. 18-Sept. 20, 2006)
pp. 851-856.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Tadj, Chakib et Ngantchaha, G..
2006.
« Context handling in a pervasive computing system framework ».
In 3rd International Conference on Mobile Technology, Applications and Systems (Bangkok, Thaïland, Oct. 25-27, 2006)
New York, NY, USA : Association for Computing Machinery.
Taleb, R. S., Smaïli, A. et Masson, Christian.
2006.
« Numerical simulation of natural convection within a wind turbine nacelle ».
In 14th Annual Conference of the CFDSC (Kingston, ON, Canada, July 16-18, 2006)
Therssen, E., Desgroux, P., Bouvier, Y., Lemaire, R., Thomson, K., Ziskind, M., Focsa, C., Mihesan, C., Aboukais, A., Ledoux, F., Cousin, R. et Abi Aad, E..
2006.
« Soot characterization produced during the combustion of different fuels ».
In 17th EFCA Speciality conference: Air Pollution and environmental health, from science to action (Lille, France, Sept. 05-08, 2006)
Thibault, Robert, Al Haddad, Kamal et Dessaint, Louis-A..
2006.
« Three phase grid connected converter with an efficient power flow control algorithm: experimental validation ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1305-1310.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Thibeault, C., Tremblay, D. et Hariri, Y..
2006.
« Redefining the role of functional testing ».
In IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Gatineau, Que., Canada, June 18-21, 2006)
pp. 133-136.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Thibeault, Claude.
2006.
« Improving digital IC testing with analog circuits ».
In IEEE North-East Workshop on Circuits and Systems (NEWCAS) (Gatineau, Que., Canada, June 18-21, 2006)
pp. 285-288.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Toews, Matthew et Arbel, Tal.
2006.
« Detection over viewpoint via the object class invariant ».
In 18th International Conference on Pattern Recognition, 2006. ICPR 2006 (Hong Kong, China, Aug. 20-24, 2006)
pp. 765-768.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Inc..
Toews, Matthew, Collins, D. Louis et Arbel, Tal.
2006.
« A statistical parts-based appearance model of inter-subject variability ».
In Medical Image Computing and Computer-Assisted Intervention – MICCAI 2006. 9th International Conference, Copenhagen, Denmark, October 1-6, 2006, Proceedings, Part I (Copenhagen, Denmark, Oct. 1-6, 2006)
Coll. « Lecture Notes in Computer Science », vol. 4190.
pp. 232-240.
Tran, Con, Dziong, Zbigniew et Pioro, M..
2006.
« Economic framework for virtual network operators ».
In 9th International Conference on Computer & Information Technology (ICCIT) (Dhaka, Bangladesh, Dec. 21-23, 2006)
Tran, Nguyen Duy Phuong, Ngô, Anh Dung et Lamarche, Louis.
2006.
« Development of a flexible protective system for press-brakes using vision part 1: algorithm ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 630-634.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Tremblay, E., Chandra, A., Lagacé, P. J. et Gagnon, R..
2006.
« Study of grid-side converter control for grid-connected DFIG wind turbines under unbalanced load condition ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 1619-1624.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Tremblay, E., Chandra, Ambrish et Lagacé, Pierre Jean.
2006.
« Grid-Side converter control of DFIG wind turbines to enhance power quality of distribution network ».
In IEEE Power Engineering Society General Meeting (PES) (Montreal, Canada, June 18-22, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Tremblay, T.G., Rivest, Louis, Msaaf, O. et Maranzana, Roland.
2006.
« The role of associations in CAD and PLM for handling change propagation during product development ».
In Leading the Web in concurrent engineering : next generation concurrent engineering (Antibes, France, Sept. 18-21, 2006)
pp. 507-514.
Amsterdam, The Netherlands : IOS Press.
Ung, Bora et Sheng, Yunlong.
2006.
« Interference of surface wave at a metallic subwavelength slit ».
In Frontiers in Optics, FiO 2006 (Rochester, NY, USA, Oct. 10, 2006)
Rochester, New York : Optical Society of America.
Uta, E., Humbert, M., Gey, N., Bocher, P. et Jahazi, M..
2006.
« Mise en évidence et caractérisation des hétérogénéités de textures dans l'alliage de titane IMI 834 de microstructure bimodale à vocation aéronautique ».
In Materiaux 2006 : Dijon, 13-17 Novembre 2006 : [recueil de la conference sur CD-ROM] (Dijon, France, 13-17 nov. 2006)
Dijon : Université de Bourgogne.
Van Rijswijk, K., Joncas, Simon, Malek, O.J.A., Bersee, H.E.N. et Beukers, A..
2006.
« Vacuum infused thermoplastic composites for wind turbine blades ».
In Polymer composite materials for wind power turbines : proceedings of the 27th Risø International Symposium on Materials Science, 4 - 7 September 2006, Risø National Laboratory, Roskilde, Denmark (Roskilde, Denmark, Sept. 4-7, 2006)
pp. 307-314.
Roskilde : Denmark Risø National Laboratory.
Vázquez, Carlos, Tam, Wa James et Speranza, Filippo.
2006.
« Stereoscopic imaging: filling disoccluded areas in depth image-based rendering ».
In Three-Dimensional TV, Video, and Display V (Boston, MA, USA, Oct. 3-4, 2006)
Coll. « Proceedings of SPIE », vol. 6392.
0D1-0D12.
Bellingham, WA, USA : SPIE.
Velho, F., Gabrea, Marcel et Gargour, Christian.
2006.
« Reconnaissance du locuteur à l'aide de la transformée en ondelettes continue (TOC) ».
In Canadian Conference on Electrical and Computer Engineering (CCECE) (Ottawa, Canada, May 7-10, 2006)
pp. 2074-2077.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Vellasques, E., Oliveira, L.S., Britto Jr, A. S., Koerich, A. L. et Sabourin, Robert.
2006.
« Modeling segmentation cuts using support vector machines ».
In 10th International Workshop on Frontiers in Handwriting Recognition (IWFHR) (La Baule, France, Oct. 23-26, 2006)
pp. 41-46.
Vo, P., Yue, S. et Jahazi, M..
2006.
« Microstructure development of a near alpha-titanium alloy during high temperature deformation ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 473-484.
Canadian Institute of Mining, Metallurgy and Petroleum.
Voix, J., Hager, L. D. et Zeidan, J..
2006.
« Experimental validation of the objective measurement of individual earplug field performance ».
In EURONOISE 2006 - The 6th European Conference on Noise Control: Advanced Solutions for Noise Control (Tampere, Finland, May 30-June 01, 2006)
Acoustical Society of Finland.
Vu, V. H. et Tran, D. N..
2006.
« Influence of added mass to bridges vibration frequencies ».
In Proceedings of Vietnam-Germany Seminar on New Developments in Bridge Engineering and Design (Hanoi, Vietnam, Oct., 2006)
Vu, Viet Hung, Thomas, Marc et Lakis, A.A..
2006.
« Analyse modale en opération par méthodes temporelles ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006)
pp. 330-343.
Calgary, Canada : CMVA.
Vu-Khanh, Toan et Dolez, Patricia.
2006.
« New technologies and challenges for textiles in protective clothing ».
In 2nd International Conference of Applied Research Textile (Monastir, Tunisia, Nov. 30-Dec. 2, 2006)
Wang, Weimin, Rivard, Hugues et Zmeureanu, Radu.
2006.
« A comparative study of representation and encodings for building shape optimization with genetic algorithms ».
In Proceedings of the Joint CIB W78, W102, ICCCBE, ICCC, and DMUCE International Conference on Computing and Decision Making in Civil and Building Engineering (Montreal, Canada, June 14-16, 2006)
pp. 2417-2426.
Wang, Weimin, Zmeureanu, Radu et Rivard, Hugues.
2006.
« Sensitivity study in finding the optimal shape of a green office building ».
In eSim 2006 Proceedings : IBPSA-Canada 4th Biennial Building Performance Simulation Conference = la 4ième Conférence Bisannuelle de l'IBPSA-Canada sur la Simulation du Rendement Énergétique dnas les Bâtiments (Toronto, ON, Canada, May 4-5, 2006)
pp. 225-232.
IBPSA-Canada.
Weiss, Julien et Chokani, Ndaona.
2006.
« Integration properties of the focusing Schlieren deflectometer ».
In 25th AIAA Aerodynamic Measurement Technology and Ground Testing Conference (San Francisco, CA, USA, June 5-8, 2006)
Coll. « AIAA Paper »
American Institute of Aeronautics and Astronautics.
Weiss, Julien et Chokani, Ndaona.
2006.
« Quiet tunnel experiments of shockwave / turbulent boundary layer interaction ».
In 36th AIAA Fluid Dynamics Conference and Exhibit (San Francisco, CA, USA, June 5-8, 2006)
Coll. « AIAA Paper »
American Institute of Aeronautics and Astronautics.
Winckelmans, G., Cocle, R., Dufresne, L., Capart, R., Bricteux, L., Daeninck, G., Lonfils, T., Duponcheel, M., Desenfans, O. et Georges, L..
2006.
« Direct numerical simulation and large-eddy simulation of wake vortices: going from laboratory conditions to flight conditions ».
In 4th European Conference on Computational Fluid Dynamics (ECCOMAS CFD) (Egmond aan Zee, Netherlands, Sept. 5-8, 2006)
Wong, Tony, De Kelper, Bruno et Bigras, Pascal.
2006.
« Structured controller design using evolution strategies : a computational analysis ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2984-2989.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Xiao, M., Wanjara, P., Jahazi, M. et Poon, C..
2006.
« Nd:Yag-laser welding of Inconel 718 alloy ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 395-412.
Canadian Institute of Mining, Metallurgy and Petroleum.
Yeste Ojeda, Omar A. et Grajal, Jesus.
2006.
« Atomic decomposition based detector for denoising in ISAR imaging ».
In 2006 14th European Signal Processing Conference' EUSIPCO 2006 (Florence, Italy, Sept. 4-8, 2006)
Poland : European Signal Processing Conference.
Yeste Ojeda, Omar A. et Grajal, Jesus.
2006.
« Detection of unknown signals based on spectral correlation measurements ».
In 2006 14th European Signal Processing Conference, EUSIPCO 2006 (Florence, Italy, Sept. 4-8, 2006)
Poland : European Signal Processing Conference.
Yeste-Ojeda, Omar A. et Grajal, Jesus.
2006.
« Atomic decomposition for ISAR imaging ».
In 2006 IEEE Conference on Radar (Verona, NY, USA, Apr. 24-27, 2006)
pp. 504-509.
IEEE.
Youssef, N.B.H., Al Haddad, Kamal et Kanaan, Hadi.
2006.
« DSP based experimental validation technique applied to the development of a new Vienna rectifier small signal model ».
In 32nd Annual Conference on IEEE Industrial Electronics (IECON) (Paris, France, Nov. 6-10, 2006)
pp. 394-399.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Youssef, N.B.H., Al Haddad, Kamal et Kanaan, Hadi Youssef.
2006.
« Real time linear control implementation based on experimentally validated small signal model of a three-phase three-level boost-type Vienna rectifier ».
In 32nd Annual Conference on IEEE Industrial Electronics (IECON) (Paris, France, Nov. 6-10, 2006)
pp. 37-42.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Yu, A., Bonev, Ilian et Zsombor-Murray, P..
2006.
« New XY-theta positioning table with partially decoupled parallel kinematics ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 3108-3112.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Yue, Li et Aissaoui, Rachid.
2006.
« Smart sensor, smart chair, can it predicts your sitting posture? ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2754-2759.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Zaiet, Chafik, Akhrif, Ouassima et Saydy, Lahcen.
2006.
« Modeling and non-linear control of a gas turbine ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 2688-2694.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Zouidi, Abdelaziz, Al Haddad, Kamal et Fnaiech, Farhat.
2006.
« Neural network controlled three-phase three-wire shunt active power filter ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 5-10.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Zouidi, Abdelaziz, Fnaiech, Farhat et Al Haddad, Kamal.
2006.
« Voltage source inverter based three-phase shunt active power filter: topology, modeling and control strategies ».
In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006)
pp. 785-790.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Zouidi, Abdelaziz, Fnaiech, Farhat, Al Haddad, Kamal et Rahmani, Salem.
2006.
« Artificial neural networks as harmonic detectors ».
In 32nd Annual Conference on IEEE Industrial Electronics (IECON) (Paris, France, Nov. 6-10, 2006)
pp. 2889-2892.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Zue, Aslain Ovono et Chandra, Ambrish.
2006.
« Simulation and stability analysis of a 100 kW grid connected LCL photovoltaic inverter for industry ».
In IEEE Power Engineering Society General Meeting (PES) (Montreal, Canada, June 18-22, 2006)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. Livre
Thomas, Marc et Liu, Zhaoheng et Bouthillier, Érik, éds.
2006.
« Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 ».
Calgary, Canada : ACVM.
Bouzid, A. et Kockelmann, H. et Sawa, T., éds.
2006.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Abran, Alain et April, Alain.
2006.
« Améliorer la maintenance du logiciel ».
Longueuil, Québec : Loze-Dion éditeur. 337 p.
Gabréa, Marcel, Grivel, Éric, Labarre, David et Najim, Mohamed.
2006.
« Modélisation, estimation et filtrage optimal en traitement du signal ».
Paris : Hermès science publications ; Lavoisier. 414 p.
Gargour, Christian et Ramachandran, Venkat.
2006.
« Traitement numérique des signaux ».
2e éd.
Montréal, Canada : École de technologie supérieure . 392 p.
Oliveira, O. J. et Melhado, S.B..
2006.
« Como administrar empresas de projeto de arquitetura e engenharia civil ».
São Paulo : PINI. 64 p. Chapitre de livre
Abran, Alain et April, Alain.
2006.
« Génie logiciel : La qualité du logiciel ».
In
Encyclopédie de l'informatique et des systèmes d'information.
pp. 1151-1159. Paris : Vuibert.
Abran, Alain, Cuadrado, Juan, García-Barriocanal, Elena, Mendes, Olavo, Sánchez-Alonso, Salvador et Sicilia, Miguel.
2006.
« Engineering the ontology for the SWEBOK : issues and techniques ».
In
Ontologies for software engineering and software technology.
pp. 103-121. Berlin : Springer.
April, Alain et Laporte, Claude Y..
2006.
« An overview of software quality concepts and management issues ».
In
Measuring Information Systems Delivery Quality.
pp. 28-54. Idea Group Publishing.
Bouix, Sylvain, Siddiqi, Kaleem, Tannenbaum, Allen et Zucker, Steven W..
2006.
« Medial axis computation and evolution ».
In
Statistics and analysis of shapes.
Coll. « Modeling and Simulation in Science, Engineering and Technology ».
pp. 1-28. Springer Basel.
Cheikhi, Leila, Abran, Alain et Buglione, Luigi.
2006.
« El repositorio de proyectos software ISBSG & ISO 9126: una oportunidad para medir la calidad ».
In
Factores clave de éxito en Ingeniería del Software.
pp. 41-47. Asociación de Técnicos de Informática.
Duong, Luc, Cheriet, Farida et Labelle, Hubert.
2006.
« Towards an automatic classification of spinal curves from x-ray images ».
In
Research into Spinal Deformities 5.
Coll. « Studies in Health Technology and Informatics », vol. 123.
pp. 419-424. Washington, DC : IOS Press.
Mac-Thiong, JM, Labelle, Hubert et de Guise, Jacques A..
2006.
« Comparison of sacropelvic morphology between normal adolescents and subjects with adolescent idiopathic scoliosis ».
In
Research into Spinal Deformities 5.
Coll. « Studies in Health Technology and Informatics », vol. 123.
pp. 195-200. Washington, DC : IOS Press.
Moha, N., Gaffar, A. et Michel, G..
2006.
« Remote usability evaluation of web interfaces ».
In
Human Computer Interaction Research in Web Design and Evaluation.
pp. 273-289. IGI Global.
Oliveira, Luiz S., Morita, Marisa et Sabourin, Robert.
2006.
« Feature selection for ensembles using the multi-objective optimization approach ».
In
Multi-Objective Machine Learning.
Coll. « Studies in Computational Intelligence », vol. 16.
pp. 49-74. Berlin, Heidelberg : Springer Berlin Heidelberg.
Tanguay, Frédéric, Mac-Thiong, Jean-Marc, de Guise, Jacques A. et Labelle, Hubert.
2006.
« Relation between the sagittal pelvic and lumbar spine geometries following surgical correction of adolescent idiopathic scoliosis: A preliminary study ».
In
Research into Spinal Deformities 5.
Coll. « Studies in Health Technology and Informatics », vol. 123.
pp. 299-302. Washington, DC : IOS Press. Article de revue ou de magazine, non révisé par les pairs
Charlot, E., Nadeau, Sylvie et Kenné, Jean-Pierre.
2006.
« Impact du contrôle du cadenassage sur les risques d'accidents et les coûts de production ».
Travail et Santé, vol. 22, nº 3.
pp. 48-52.
Fabricio, M. M. et Melhado, S.B..
2006.
« A Complexidade dos projetos e a necessidade de soluções especializadas ».
Projeto.
pp. 8-9.
Fabricio, M. M. et Melhado, S.B..
2006.
« Coordenação e compatibilização de projetos ».
Projeto.
Maref, W., Rousseau, M. Z., Lei, W., Manning, M. M., Nicholls, M. et Nunes, S. C..
2006.
« Hygrothermal performance of wall assemblies ».
Construction Innovation, vol. 11, nº 4.
p. 5.
Maref, Wahid et Rousseau, Madeleine.
2006.
« L'IRC-CNRC se dote d'une nouvelle installation de recherche pour la performance hygrothermique in-situ des ensembles muraux ».
Échos techniques, vol. 11, nº 85.
Melhado, S.B..
2006.
« Projetos integrados (Entrevista) ».
Techne : Revista de Tecnologia da construção.
pp. 44-50.
Mwale, F., Girard-Lauriault, P. L., Wang, H. T., Lerouge, S., Antoniou, J. et Wertheimer, M. R..
2006.
« Suppression of hypertrophy and osteogenesis in committed human mesenchymal stem cells cultured on novel nitrogen-rich plasma polymer coatings ».
[Résumé d'une communication à une conférence]. European Cells and Materials, vol. 12, nº Suppl. 1.
p. 34.
Nadiminti, K., Assunção, M. et Buyya, R..
2006.
« Distributed systems and recent innovations : Challenges and benefits ».
InfoNet Magazine, vol. 16, nº 3.
Ouazia, B., Reardon, J. T., Maref, W. et Rousseau, M. Z..
2006.
« Une maison expérimentale permet la recherche combinée sur l'environnement intérieur et l'enveloppe du bâtiment ».
Innovation en Construction, vol. 11, nº 4.
1, 3.
Ouazia, B., Reardon, J. T., Maref, W. et Rousseau, M. Z..
2006.
« Upgraded test house enables cohesive indoor environment and building envelope research ».
Construction Innovation, vol. 11, nº 4.
1, 3.
Soulez, G., Lerouge, S., Salazkine, I., Darsaut, T., Oliva, V. L. et Raymond, J..
2006.
« Rôle de l’endothelium et du flot collateral dans la persistance des fuites de type I ».
[Résumé d'une communication à une conférence]. Journal de Radiologie, vol. 87, nº 10.
p. 1200. AfficheAissaoui, Rachid, Mecheri, H., Hagemeister, Nicola et de Guise, Jacques A.. 2006. « Robust estimation of screw axis from 3D pose using dual quaternion algebra ». Affiche présentée lors de la conférence : 9th International Symposium on 3D Analysis of Human Movement (Valenciennes, France, Jun 28-30, 2006). Boivin, K., Hagemeister, Nicola, Turcot, K., Prince, F. et de Guise, Jacques A.. 2006. « Les effets intersessions du port d'un exosquelette sur le patron de marche de patients gonarthrosiques ». Affiche présentée lors de la conférence : Journée Scientifique du Réseau d'Adaptation et de Réadaptation du Québec (REPAR) (Montréal, QC, Canada, 19 mai 2006). Charbonneau, C., Gautrot, J., Zhu, J., Hebert, M. J. et Lerouge, S.. 2006. « Development of a bioactive stent-graft for abdominal aortic aneurysms ». Affiche présentée lors de la conférence : 20th European Conference on Biomaterials (Nantes, France, Sept. 27-Oct. 1, 2006). Favre, J., Aissaoui, Rachid, Jolles, B.M., Siegrist, O., de Guise, Jacques A. et Aminian, K.. 2006. « 3D joint rotation measurement using MEMs inertial sensors: Application to the knee joint ». Affiche présentée lors de la conférence : 9th International Symposium on 3D Analysis of Human Movement (Valenciennes, France, June 28-30, 2006). Fuentes, A., Hagemeister, Nicola, Requiao, L., Fernandes, J., Ranger, P., Aissaoui, Rachid et de Guise, Jacques A.. 2006. « Analyse de la biomécanique tridimensionnelle du genou avant et après une reconstruction chirurgicale du ligament croisé antérieur ». Affiche présentée lors de la conférence : Journée Scientifique du Programme MENTOR (Montréal, QC, Canada, 17 mars 2006). Fuentes, A., Hagemeister, Nicola, Requiao, L., Südhoff, I., Fernandes, J., Ranger, P. et De Guise, Jacques A.. 2006. « Nouvelles techniques d'imagerie et d'évaluation morphofonctionnelle en 3D au service des patientes présentant des troubles de l'appareil locomoteur ». Affiche présentée lors de la conférence : 9e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, QC, Canada, 21 déc. 2006). Hager, Lee D. et Voix, Jérémie. 2006. « Individual field fit testing of hearing protectors : A field-MIRE approach ». Affiche présentée lors de la conférence : Conference of the American Society of Safety Engineers (Seattle, WA, USA, June 2006). Soulez, G., Tse, L., Bui, B. T., Salazkine, I., Oliva, V. L. et Lerouge, S.. 2006. « In vivo antegrade fenestration (IVAF) of aortic stent-graft ». Affiche présentée lors de la conférence : International Symposium on Endovascular Therapy (ISET) 2006 (Miami Beach, FL, USA, Jan. 22-26, 2006). Soulez, Gilles, Lerouge, Sophie, Salazkin, Igor, Darsaut, Tim, Oliva, Vincent L et Raymond, Jean. 2006. « Role of the endothelial lining in endoleak formation following endovascular repair of aneurysm ». Affiche présentée lors de la conférence : 2006 Annual Meeting of the Society of Interventional Radiology (Toronto, ON, Canada, Mar. 30-Apr. 4, 2006). Turcot, K., Boivin, K., Aissaoui, Rachid, Pelletier, M., Hagemeister, Nicola et de Guise, Jacques A.. 2006. « Measurement of knee joint impact during gait with 3D linear accelerations : reproducibility on a knee osteoarthritis population ». Affiche présentée lors de la conférence : Journée Scientifique, Programme MENTOR des IRSC (Montreal, QC, Canada, Mar. 17, 2006). CommunicationAbran, Alain. 2006. « COSMIC-FFP : from its initial design to its acceptance as an international standard ». Communication lors de la conférence : 1st Workshop on Ontology, Conceptualization, Epistomology for Software and Systems Engineering - ONTOSE (Alacala, Spain, June 9-10, 2005). Abran, Alain. 2006. « Development of an international consensus on the software engineering body of knowledge : SWEBOK ». Communication lors de la conférence : 1st Workshop on Ontology, Conceptualization, Epistomology for Software and Systems Engineering - ONTOSE (Alcala, Madrid, Spain, June 9-10, 2005). Abran, Alain. 2006. « La vision internationale de la qualité du logiciel ». Communication lors de la conférence : La boule de cristal du CRIM, Édition 2006 (Montréal, QC, Canada, 16-17 fév. 2006). Abran, Alain. 2006. « Qualité du logiciel: Image de marque et concurrence internationale : Serez-vous parmi les gagnants? ». Communication lors de la conférence : La boule de cristal du CRIM, Édition 2006 (Montréal, QC, Canada, 16-17 fév. 2006). Abran, Alain. 2006. « Research in software measurements ». Communication lors de la conférence : Universidad de Granada (Granada, Spain, Nov. 11, 2006). Abran, Alain et April, Alain. 2006. « Assessment of maintenance using a software maintenance maturity model (S3m) ». Communication lors de la conférence : IT productivity Metrics (Toronto, ON, Canada, Oct. 19, 2006). Aissaoui, Rachid, Husse, S., Mecheri, H., Parent, G. et de Guise, Jacques A.. 2006. « Automatic filtering techniques for three-dimensional kinematics data using 3D motion capture system ». Communication lors de la conférence : IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, QC, Canada, July 9-13, 2006). April, Alain. 2006. « Aligning ITIL to existing ISO JTC1-SC7 software engineering standards ». Communication lors de la conférence : QAI Software quality conference (Toronto, ON, Canada, 2006). Aristimuno, J. et Samson, C.. 2006. « Migrating reflections from the Moho using a refraction velocity model – An example from the Slave Craton, NWT ». Communication lors de la conférence : CSPG-CSEG-CWLS Joint conference (Calgary, AB, Canada, May 15-18, 2006). Arteau, Jean, Beauchamp, Yves, Petit, Yvan, Lajoie, Olivier et Labranche, Laetitia. 2006. « Évaluation des systèmes d’attaches antichutes pour les poseurs d’acier d’armature (ferrailleurs) ». Communication lors de la conférence : Conférence scientifique de l'ÉREST (Montréal, QC, Canada, 14 déc. 2006). Bauer, Dominique Bernard. 2006. « Calculating the shear lag effects in tension member connections ». Communication lors de la conférence : SSEF Architecture and Engineering Educators Meeting (Edmonton, AB, Canada, Mar. 3-4, 2006). Bauer, Dominique Bernard et Morales, M.. 2006. « Évaluation des dommages dus à la fatigue et de la vie résiduelle des ponts métalliques de plus de 50 ans sous l'action des surcharges routières de magnitude et fréquences variables ». Communication lors de la conférence : 11e Édition de la Semaine des Infrastructures Urbaines (INFRA) (Montréal, QC, Canada, 21-23 nov. 2005). Blaquière, Yves. 2006. « Le génie microélectronique et l'évolution des technologies ». Communication lors de la conférence : Congrès annuel de l'Association des professeurs en sciences du Québec (APSQ) (Montréal, QC, Canada, Nov. 2006). Boivin, K., Hagemeister, Nicola, Turcot, K., Aissaoui, Rachid, Prince, F. et de Guise, Jacques A.. 2006. « L'influence d'un exosquelette sur le patron de marche de patients gonarthrosiques ». Communication lors de la conférence : 26e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 5 mai 2006). Boivin, K., Turcot, K., Hagemeister, Nicola, Prince, F. et de Guise, Jacques A.. 2006. « L'influence d'un outil d'évaluation de la cinématique 3D du genou sur la marche de patients gonarthrosiques ». Communication lors de la conférence : Journée Scientifique, Programme MENTOR des IRSC (Montréal, QC, Canada, 17 mars 2006). Boivin, Karine, Hagemeister, Nicola, Turcot, Katia, Aissaoui, Rachid, Prince, François et de Guise, Jacques A.. 2006. « Influence of a 3D knee movement analyzer on gait patterns of knee osteoarthritis patients ». Communication lors de la conférence : First Joint ESMAC & GCAS meeting (Amsterdam, Netherlands, Sept. 25-30, 2006). Bonneviot, Marie-Christine, Soulez, G. et Lerouge, Sophie. 2006. « Development of an injectable gel for embolization of the abdominal aortic aneurysm ». Communication lors de la conférence : 56e Congrès canadien de génie chimique (Sherbrooke, QC, Canada, Oct. 15-18, 2006). Brissette, François, Leconte, Robert, Minville, M. et Roy, R.. 2006. « Can we adequately quantify the increase/decrease of flooding due to climate Change? ». Communication lors de la conférence : EIC Climate Change Technology Conference (Ottawa, ON, Canada, May 10-12, 2006). Chapleau, R., Pellecuer, L. et Morency, C.. 2006. « La persistance comportementale des ménages...en longitudinal ». Communication lors de la conférence : 41ème congrès annuel de l'Association Québécoise des Transports (Québec, QC, Canada, 9-11 avril 2006). Charbonneau, Cindy, Hébert, M. J., Lerouge, Sophie, Gautrot, J. et Zhu, X.. 2006. « Development of a bioactive stent-graft for abdominal aortic aneurysms (AAA) ». Communication lors de la conférence : 56e Congrès canadien de génie chimique (Sherbrooke, QC, Canada, Oct. 15-18, 2006). Coallier, François. 2006. « An integrated view of enterprise IT practices ». Communication lors de la conférence : National Association of Software and Service Companies Quality Summit (NASSCOM) (Bangalore, India, Sept. 5-7, 2006). Coallier, François. 2006. « International standardisation in software and systems engineering (ISO/IEC JTC 1/SC7) ». Communication lors de la conférence : IEEE Computer Society Board of Governor Caucus (San Juan, PR, USA, June 15, 2006). Coallier, François. 2006. « International standardization in software and systems engineering ». Communication lors de la conférence : The Hong Kong Polytechnic University (Hong Kong, China, Oct. 26, 2006). Coallier, François. 2006. « Keynote address, the eTI-CM : a capstone model for enterprise IT ». Communication lors de la conférence : National Association of Software and Service Companies Quality Summit (NASSCOM) (Bangalore, India, Sept. 5-7, 2006). Corso, D. A., Almeida, R. H. P., Britto Jr., A. S., Koerich, A. L. et Oliveira, L. E. S.. 2006. « Utilizando momentos invariantes para o reconhecimento de padrões em um sistema de visão computacional ». Communication lors de la conférence : XV Encontro Anual de Iniciação Científica (EAIC) (Ponta Grossa, Brasil, Aug. 22-25, 2006). Corso, D. A., Almeida, R. H. P., Britto Jr., A. S., Koerich, A. L. et Oliveira, L. E. S.. 2006. « Visão computacional: sistemas de visão aplicados a inspeção industrial ». Communication lors de la conférence : XV Encontro Anual de Iniciação Científica (EAIC) (Ponta Grossa, Brasil, Aug. 22-25, 2006). Da Costa, E. Luis et Landry, Jacques-André. 2006. « Décrire des plantes naturelles avec des méthodes de reconstruction fractales comme aide à l'entreprise agricole ». Communication lors de la conférence : 74e Congrès de l'ACFAS : Le Savoir, Trame de la Modernité (Montréal, QC, Canada, 16-18 mai 2006). David, Éric, Nair, A., Godin, T. et Bellemare, J.. 2006. « The modeling of ramped direct voltage curves ». Communication lors de la conférence : IEEE International Symposium on Electrical Insulation (ISEI) (Toronto, ON, Canada, June 11-14, 2006). Desmarais, M. et Aissaoui, Rachid. 2006. « Estimation de la dissipation intra-articulaire du genou pendant la marche ». Communication lors de la conférence : 9e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, QC, Canada, 19 déc. 2006). Desmarais, M. et Aissaoui, Rachid. 2006. « The effect of modeling knee joint energy dissipation on the outcome of inverse dynamic analysis ». Communication lors de la conférence : 26e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, May 5, 2006). Desmarais, M. et Aissaoui, Rachid. 2006. « The effect of modeling knee joint energy dissipation on the outcome of inverse dynamic analysis ». Communication lors de la conférence : Journée Scientifique du Programme MENTOR (Montreal, QC, Canada, Mar. 17, 2006). Desmarais, M., Aissaoui, Rachid et Barré, A.. 2006. « Knee joint energy dissipation : a new conceptual approach to inverse dynamic analysis ». Communication lors de la conférence : 9th International Symposium on 3D Analysis of Human Movement (Valenciennes, France, June 28-30, 2006). Desroches, G., Aissaoui, Rachid et Bourbonnais, D.. 2006. « Effectiveness of the resultant force at the pushrim and shoulder kinectics: A simulation study ». Communication lors de la conférence : Annual Conference of RESNA Rehabilitation Engineering Society of North America (Atlanta, GA, USA, June 2006). Desroches, G., Aissaoui, Rachid et Bourbonnais, D.. 2006. « L'efficacité de la force résultante à la roue lors de la propulsion en fauteuil roulant et la cinétique de l'épaule: une étude par simulation ». Communication lors de la conférence : Journée de la Recherche du Programme MENTOR des IRSC (Institut de Recherche en Santé du Canada) (Montréal, QC, Canada, 17 mars 2006). Dion, Y., Bennis, Saad, Hausler, Robert et Glaus, M.. 2006. « IT and systemic approach for managing sustainable urban infrastructure rehabilitation ». Communication lors de la conférence : 11th International Conference on Computing in Civil and Building Engineering (ICCCBE) (Montreal, QC, Canada, June 14-16, 2006). Dupuis, K. et Petit, Yvan. 2006. « Évaluation de l'influence de la qualité osseuse sur la fixation d'une fracture vertébrale ». Communication lors de la conférence : Concours Innovation-Recherche de l’Association de l’Industrie des Technologies de la Santé (AITS) (Montréal, QC, Canada, 15-16 mars 2006). Dupuis, Karine et Petit, Yvan. 2006. « Is QCT an appropriate method to estimate bone mechanical properties? ». Communication lors de la conférence : 14th Biennal Conference for Canadian Society of Biomechanics = 14e Conférence Biennale de la Société Canadienne de Biomécanique (Waterloo, ON, Canada, 2006). Dziong, Zbigniew. 2006. « Contrôle de trafic et qualité de service dans les réseaux mobiles ad hoc ». Communication lors de la conférence : ACFAS workshop (Montréal, QC, Canada, 15-19 mai 2006). Fernberg, P.A., Samson, C. et Boteler, D.H.. 2006. « Magnetotelluric and resistivity soundings in the Mackenzie River Valley, Northwest Territories ». Communication lors de la conférence : 78th Annual Meeting of the Eastern Section of the Seismological Society of America and POLARIS Ontario workshop (Ottawa, ON, Canada, Oct. 01-04, 2006). Fernberg, P.A., Samson, C., Trichtchenko, L. et Boteler, D.H.. 2006. « Assessment of EM Environment for Pipelines ». Communication lors de la conférence : 18th International Workshop on Electromagnetic Induction in the Earth (El Vendrell, Spain, Sept. 17-23, 2006). Fromageau, J., Lerouge, S., Maurice, R. L., Soulez, G. et Cloutier, G.. 2006. « Ultrasound elastography for the non-invasive healing follow-up of abdominal aneurysms ». Communication lors de la conférence : IEEE Ultrasonics Symposium, 2006 (Vancouver, BC, Canada, Oct. 2-6, 2006). Hager, Lee D. et Voix, Jérémie. 2006. « F-MIRE : a new approach to field evaluation of hearing protectors ». Communication lors de la conférence : The 94th National Safety Council (NSC) Congress And Expo (San Diego, CA, USA, Nov. 3-10, 2006). Hallé, Stéphane et Nadeau, Sylvie. 2006. « Intégration de compétence en SST en milieu universitaire – Génie mécanique ». Communication lors de la conférence : Institut de Recherche en Santé et en Sécurité du Travail (IRSST) (Montréal, QC, Canada, 12 sept. 2006). Hefford, S., Smith, R. et Samson, C.. 2006. « Comparing geophysical electromagnetic survey systems on the basis of target detection performance versus geometric transmitter-receiver variations ». Communication lors de la conférence : 8th Annual Scientific Conference of the GEOIDE Network (Banff, AB, Canada, May 31-June 02, 2006). Henderson, A. D. et Demond, A. H.. 2006. « Long-term performance of permeable reactive barriers ». Communication lors de la conférence : Fifth International Conference on Remediation of Chlorinated and Recalcitrant Compound (Monterey, CA, USA, May 22-25, 2006). Herd, R.K., Herd, C.D.K., Nickin, I., Back, M., Samson, C., Spooner, E.T.C., Christie, I. et Deslauriers, A.. 2006. « Estalish a Canadian astromaterials facilities/research network ». Communication lors de la conférence : Exploration Canada Workshop (Montreal, QC, Canada, Oct. 17-18, 2006). Hoang, P.H. et Ngô, Anh Dung. 2006. « Behavior of thermoplastic composite carbon/PEKK T-Joints under static tension web pull-Off loading ». Communication lors de la conférence : Symposium on Advanced Composites and the 2nd Sino-Canadian Workshop on Composite Technology and Trade (Jiangsu, China, Oct. 2006). Joncas, Simon. 2006. « Design and manufacturing considerations for large thermoplastic composite wind turbine blades ». Communication lors de la conférence : Society for the Advancement of Material & Process Engineering - Eastern Canada Chapter meetings (Montreal, QC, Canada, Mar. 2006). Kenny, P., Boulianne, G., Ouellet, P. et Dumouchel, Pierre. 2006. « The geometry of the channel space in GMM-based speaker recognition ». Communication lors de la conférence : IEEE Odyssey-The Speaker and Language Recognition Workshop (San Juan, PR, USA, June 28-30, 2006). Kenny, P., Gupta, V., Boulianne, G., Ouellet, P. et Dumouchel, Pierre. 2006. « Feature normalization using smoothed mixture transformations ». Communication lors de la conférence : International Conference on Spoken Language Processing Proceedings (INTERSPEECH) (Pittsburgh, PA, USA, Sept. 17-21, 2006). Khelia, I., Aissaoui, Rachid, Bourbonnais, D. et Nadeau, Sylvie. 2006. « Effets des réglages de l'interface siège-dossier du fauteuil roulant manuel sur la biomécanique de la propulsion des personnes paraplégiques adultes ». Communication lors de la conférence : Journée Scientifique du Programme MENTOR (Montréal, QC, Canada, 17 mars 2006). Kochlef, K., Kouki, Ammar B. et Samet, A.. 2006. « On the limitations of the space domain formulation of the MoM method for planar circuit ». Communication lors de la conférence : Progress in Electromag. Research Symposium (PIERS) (Cambridge, MA, USA, Mar. 26-29, 2006). Labbé, D., Hagemeister, Nicola, Charbonneau, M. et de Guise, Jacques A.. 2006. « Evaluation of the intra and inter-observer reproducibility of a method for studying three-dimensional knee kinematics ». Communication lors de la conférence : 9th International Symposium on 3D Analysis of Human Movement (Valenciennes, France, June 28-30, 2006). Labbé, D., Hagemeister, Nicola, Fernandes, J. et de Guise, Jacques A.. 2006. « Développement et pré-validation d'un outil de mesure du phénomène de Pivot Shift dans l'articulation du genou: méthodologie ». Communication lors de la conférence : 9e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, QC, Canada, 21 déc. 2006). Lamarre, L. et David, Éric. 2006. « Dielectric response of rotating machine stator insulation system ». Communication lors de la conférence : Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Kansas City, MO, USA, Oct. 15-18, 2006). LeBoeuf, D., Nollet, Marie-José, Achim, C. et Jolicoeur, L.. 2006. « Microzonation and vulnerability assessment for seismic risk management in Quebec city ». Communication lors de la conférence : 78th Annual Meeting of the Eastern Section of the Seismological Society of America (ES-SSAn) (Ottawa, ON, Canada, Oct. 1-4, 2006). Lejeune, M. et Brunet, L.. 2006. « La communauté de pratique : au carrefour des notions de groupe informel et de transmission des savoirs tacites ». Communication lors de la conférence : Congrès de l’Association Internationale de Psychologie et du Travail de Langue Française (Hammamet, Tunisie, 7 juil. 2006). Lemay, M., Arrott, M. et François, Véronique. 2006. « Grid resource instrument model (GRIM) architecture ». Communication lors de la conférence : User Controlled Light Path Workshop (UCLP) (Ottawa, ON, Canada, Mar. 14, 2006). Lerouge, S., Major, A., Girard-Lauriault, P. L., Hebert, M-J., Soulez, G., Mwale, F. et Wertheimer, M. R.. 2006. « A novel nitrogen-rich plasma polymerized polymer to promote healing around stent-grafts after endovascular aneurysm repair ». Communication lors de la conférence : 20th European Conference on Biomaterials (Nantes, France, Sept. 27-Oct. 1, 2006). Levasseur, A., Tétreault, P., de Guise, Jacques A., Nuño, Natalia et Hagemeister, Nicola. 2006. « Improvement of the ISB joint coordinate system to describe shoulder joint kinematics ». Communication lors de la conférence : 5th World Congress of Biomechanics (Munich, Germany, July 29-Aug. 4, 2006). Li, Y., Aissaoui, Rachid, Turcot, K., Boivin, K., Hagemeister, Nicola et de Guise, Jacques A.. 2006. « Classification of gait patterns using kinematic, kinetic and acceleration variables ». Communication lors de la conférence : 5th World Congress of Biomechanics (Munich, Germany, July 29-Aug. 4, 2006). Mac-Thiong, J.-M., Labelle, H. et de Guise, Jacques A.. 2006. « Assessment of spinopelvic morphology in adolescent with idiopathic scoliosis : comparison with normal adolescents ». Communication lors de la conférence : 6e Réunion Annuelle de la Société Canadienne du Rachis (Lake Louise, AB, Canada, Mar. 22-25, 2006). Madrala, A. et Nuño, Natalia. 2006. « Bone cement polymerization : influence of the temperature on the residual stresses generation ». Communication lors de la conférence : 14th Biennial Conference for the Canadian Society for Biomechanics (Waterloo, QC, Canada, Aug. 16-19, 2006). Maref, W., Rousseau, B. et Manning, M.. 2006. « Field assessment of the hygrothermal performance of innovative wall and window systems ». Communication lors de la conférence : BECOR Seminar : Protecting Your Architectural Asset : Monitoring of Building Envelopes for Moisture Management Performance (Ottawa, ON, Canada, Oct. 11, 2006). Maref, W. et Rousseau, M. Z.. 2006. « Review of full-scale test methodology for HAM benchmarking ». Communication lors de la conférence : CIB W40 Seminar on Research in Building Physics (Syracuse, NY, USA, Sept. 05, 2006). Maref, W., Rousseau, M. Z. et Manning, M. M.. 2006. « Assessing the hygrothermal performance of innovative wall and window systems ». Communication lors de la conférence : In-House IRC Seminar (Ottawa, ON, Canada, Oct. 11, 2006). Maref, Wahid, Lacasse, Michael et Rousseau, Madeleine. 2006. « Experimental test to assess hygrothermal performance of building envelope systems ». Communication lors de la conférence : 3rd International Building Physics Conference (Montreal, QC, Canada, Aug. 27-31, 2006). Masmoudi, A., Paquette, G., Saliah, H. et Champagne, Roger. 2006. « Développement d'un scénario de laboratoire en ligne par une agrégation de composants logiciels basée sur les ontologies ». Communication lors de la conférence : 3e Symposium International en Enseignement à Distance-Technologies Pédagogiques, Web et Réseaux (Hammamat, Tunisie, 25-28 mai 2006). Mezghani, N., Mitiche, A. et Cheriet, Mohamed. 2006. « Estimation de densité de probabilité par maximum d'entropie et reconnaissance bayesienne de caractères Arabes en-ligne. ». Communication lors de la conférence : 15e Congrès Francophone AFRIF-AFIA Reconnaissance des Formes et Intelligence Artificielle (RFIA) (Tours, France, 25-27 janv. 2006). Minville, M., Brissette, François et Leconte, Robert. 2006. « Impacts des changements climatiques sur le régime hydrologique et la gestion du système hydrique du bassin versant de la rivière Péribonka. ». Communication lors de la conférence : Canadian Dam Association Annual Conference (CDA) = Association Canadienne des Barrages (ABC) (Québec, QC, Canada, 30 sept.-5 oct. 2006). Minville, M., Brissette, François et Leconte, Robert. 2006. « Évaluation des impacts hydrologiques des changements climatiques au bassin versant de la rivière Péribonka (Québec) pour la proposition de mesures d'adaptation des opérations du système hydrique. ». Communication lors de la conférence : EIC Climate Change Technology Conference (Ottawa, ON, Canada, 10-12 mai 2006). Miresco, Edmond T. et Comeau, J.. 2006. « Système interactif d'aide à la décision pour gérer le risque dans les projets de partenariat public-privé ». Communication lors de la conférence : 33rd Annual Conference of the Canadian Society for Civil Engineering (CSCE) (Toronto, ON, Canada, 2-4 juin 2005). Noumeir, Rita. 2006. « DICOM GPWL : post-processing workflow, reporting workflow, integrating the healthcare enterprise ». Communication lors de la conférence : IHE Workshop : Changing the Way Healthcare Connects (Chicago, IL, USA, June 19-21, 2006). Noumeir, Rita. 2006. « DICOM SR : evidence documents, key image notes and simple image and numeric reports ». Communication lors de la conférence : IHE Workshop : Changing the Way Healthcare Connects (Chicago, IL, USA, June 19-21, 2006). Noumeir, Rita. 2006. « Distributing Images : access to radiology information (ARI) and cross-enterprise document sharing for imaging (XDS-I) integrating the healthcare enterprise ». Communication lors de la conférence : IHE Workshop : Changing the Way Healthcare Connects (Chicago, IL, USA, June 19-21, 2006). Noumeir, Rita. 2006. « Purchasing and integrating radiology systems with IHE : a tutorial and a real world case ». Communication lors de la conférence : The Scientific Assembly and Annual Meeting, The Radiological Society of North America (RSNA) (Chicago, IL, USA, Nov. 26-Dec. 1, 2006). Noumeir, Rita. 2006. « The connecathon : IHE's conformance testing process ». Communication lors de la conférence : IHE Canada Workshop, Connecting for Health, Using Standards to Connect (Toronto, ON, Canada, Sept. 18-19, 2006). Ouahabi, A., Thomas, Marc et Léonard, F.. 2006. « Detection of damages in beams and composite plates by harmionic excitation and time-frequency analysis ». Communication lors de la conférence : 24nd Seminar on Canadian Machinery Vibration Association (CMVA) = 24e Séminaire en Vibration de Machines (ACVM) (Montreal, QC, Canada, Oct. 25-27, 2006). Paquet, Marc, Martel, A. et Montreuil, B.. 2006. « Conception de réseaux manufacturiers basée sur la fiabilité des engagements ». Communication lors de la conférence : Journées de l'Optimisation (Montréal, QC, Canada, 8-10 mai 2006). Pérez, MA, Nuño, Natalia, Plamondon, D., Madrala, A., Gracìa-Aznar, JM. et Doblaré, M.. 2006. « Numerical simulation of bone cement polymerization: temperature and residual stresses ». Communication lors de la conférence : 16th Annual Meeting of the European Orthopaedic Research Society (Bologna, Italy, June 7-9, 2006). Plamondon, D., Madrala, A. et Nuño, Natalia. 2006. « Experiments on bone cement polymerization : temperature and residual stresses ». Communication lors de la conférence : 16th Annual Meeting of the European Orthopaedic Research Society (Bologna, Italy, June 7-9, 2006). Requiao, L. F., Fuentes, A., de Guise, Jacques A. et Forget, F.. 2006. « Validation d'un nouvel outil de mesure de la proprioception au membre inférieur ». Communication lors de la conférence : Journée Scientifique du Réseau d'Adaptation et de Réadaptation du Québec (REPAR) (Montréal, QC, Canada, 19 mai 2006 ). Rivest, Louis. 2006. « Drawingless product development process ». Communication lors de la conférence : Consortium for Research and Innovation in Aerospace in Quebec PLM Workshop (CRIAQ) (Longueuil, QC, Canada, Apr. 5, 2006). Rivest, Louis et Msaaf, Omar. 2006. « La MNS et son courtier pour une exploitation efficace de la géométrie en MDO ». Communication lors de la conférence : Journée MOSAIC (Montréal, QC, Canada, 31 mai 2006). Salah, M.B., Souden, M., Kouki, Ammar B. et Salah, M.. 2006. « Application of the space domain MoM technique to the analysis of planar guiding structures ». Communication lors de la conférence : Progress in Electromag. Research Symposium (PIERS) (Cambridge, MA, USA, Mar. 26-29, 2006). Samson, C., Ferguson, I. J., Andrews, C., Serzu, M. et Aristimuno, J.. 2006. « POLARIS long-term magnetotelluric observatories in the Northwest Territories and Southern Ontario, Canada ». Communication lors de la conférence : 18th International Workshop on Electromagnetic Induction in the Earth (El Vendrell, Spain, Sept. 17-23, 2006). Samson, Claire. 2006. « Earth conductivity structures and their effects on geomagnetic induction in pipelines ». Communication lors de la conférence : 78th Annual Meeting of the Eastern Section of the Seismological Society of America and POLARIS Ontario workshop (Ottawa, ON, Canada, Oct. 1-4, 2006). Soltani, G. R. et David, Éric. 2006. « Condition assessment of rotating machine winding insulation by analysis of charging and discharging currents ». Communication lors de la conférence : IEEE International Symposium on Electrical Insulation (ISEI) (Toronto, ON, Canada, June 11-14, 2006). Soulez, G., Lerouge, S., Salazkine, I., Darsaut, T., Oliva, V. L. et Raymond, J.. 2006. « Rôle de l’endothelium et du flot collateral dans la persistance des fuites de type I ». Communication lors de la conférence : Imagerie néphro-urologique: 54e Journées Françaises de Radiologie - Programme 2006 (Paris, France, 21-25 oct. 2006). Studd, D., Ernst, R.E., Samson, C. et Desnoyers, D.W.. 2006. « Mapping of canali of Nsomeka Planitia, Venus: New criterion for determining flow direction and interpreted flow history of the Citlalpul system ». Communication lors de la conférence : 44th Vernadsky/Brown Microsymposium on Comparative Planetology (Moscow, Russia, Oct. 09-11, 2006). Südhoff, I., Skalli, W. et de Guise, Jacques A.. 2006. « Modélisation géométrique et mécanique personnalisée de l'appareil locomoteur ». Communication lors de la conférence : Journée Scientifique du Programme MENTOR (Montréal, QC, Canada, 17 mars 2006). Suryn, Witold et Laporte, Claude Y.. 2006. « Laboratoire IQUAL - Ingénierie de la qualité du produit logiciel - La recherche pour l'industrie ». Communication lors de la conférence : SPIN Montréal (Montréal, QC, Canada, 11 mai 2005). Szczepanik, T. E., Rocha, G. M. et Koerich, A. L.. 2006. « Classificação de objetos de interesse em vídeo digital ». Communication lors de la conférence : XIV Seminário de Iniciação Científica & VIII Mostra de Pesquisa da PUCPR (Curitiba, Brasil, Oct., 2006). Thomas, Marc. 2006. « Effet des contraintes résiduelles de soudage sur les résonances des structures ». Communication lors de la conférence : 24nd Seminar on Canadian Machinery Vibration Association (CMVA) = 24e Séminaire en Vibration de Machines (ACVM) (Montréal, QC, Canada, 25-27 oct. 2006). Tremblay, Christine. 2006. « Filterless reconfigurable optical networks : an introduction ». Communication lors de la conférence : Private Seminar, Nortel's Carling Campus (Ottawa, ON, Canada, May 19, 2016). Turcot, K., Aissaoui, Rachid, Boivin, K., Pelletier, M., Hagemeister, Nicola et de Guise, Jacques A.. 2006. « Comparaison des impacts articulaires lors de la marche entre des populations asymptomatiques et gonarthrosiques à partir d'une méthode accélérométrique ». Communication lors de la conférence : 4e Congrés : les Journées de la Douleur de Montréal (Montréal, QC, Canada, 29-30 sept. 2006). Turcot, K., Aissaoui, Rachid, Boivin, K., Pelletier, M., Hagemeister, Nicola et de Guise, Jacques A.. 2006. « Évaluation des impacts articulaires par une méthode accélérométrique: résultants sur une population asymptomatique et atteinte d'arthrose du genou lors de la marche ». Communication lors de la conférence : Journée Scientifique du Réseau d'Adaptation et de Réadaptation du Québec (REPAR) (Montréal, QC, Canada, 19 mai 2006). Turcot, Katia, Aissaoui, Rachid, Boivin, Karine, Pelletier, Michel, Hagemeister, Nicola et de Guise, Jacques A.. 2006. « Three-dimensional pattern of knee linear accelerations during treadmill walking on an asymptomatic and osteoarthritis populations ». Communication lors de la conférence : First Joint ESMAC & GCAS Meeting (Amsterdam, Netherlands, Sept. 25-30, 2006). Ung, Bora et Sheng, Yunlong. 2006. « Interference of surface wave at a metallic subwavelength slit ». Communication lors de la conférence : Frontiers in Optics, FiO 2006 (Rochester, NY, USA, Oct. 10, 2006). Wang, Z., Parent, S., Mac-Thiong, J. M., Petit, Y. et Labelle, H.. 2006. « Évaluation de la morphologie du sacrum et la relation sacropelvienne avec le spondylolisthésis ». Communication lors de la conférence : 41st Annual Meeting and Pre-Meeting Course Scoliosis Research Society (Monterey, CA, USA, Sept. 13-16, 2006). Williamson, M.-C., Samson, C. et Draisey, S.. 2006. « Geological and geophysical exploration of the Moon: robotic field assistant for scientific and operational support of lunar astronauts ». Communication lors de la conférence : Exploration Canada Workshop (Montreal, QC, Canada, Oct. 17-18, 2006). Winzenrieth, R., Plamondon, D., Lavigne, M., Vendittoli, PA. et Nuño, Natalia. 2006. « On the bone volume resected and fixation for acetabular components of hip resurfacing ». Communication lors de la conférence : 16th Annual Meeting of the European Orthopaedic Research Society (Bologna, Italy, June 7-9, 2006). Winzenrieth, R., Plamondon, D., Lavigne, M., Vendittoli, PA et Nuño, Natalia. 2006. « Resurfacing components positioning effects on coxo-femoral joint range of motion ». Communication lors de la conférence : 14th Biennial Conference for the Canadian Society for Biomechanics (Waterloo, QC, Canada, Aug. 16-19, 2006). Yee, M. Y. et Koerich, A. L.. 2006. « Reconhecimento de texto em vídeo digital ». Communication lors de la conférence : XIV Seminário de Iniciação Científica & VIII Mostra de Pesquisa da PUCPR (Curitiba, Brasil, Oct., 2006). Zednik, R. J., Baniecki, J. D., Ishii, M., McIntyre, P. C., Shioga, T. et Kurihara, K.. 2006. « Dipolar orientational glass phase transition behavior inBa0.7Sr0.3TiO3 films ». Communication lors de la conférence : 18th International Symposium on Integrated Ferroelectrics (ISIF) (Honolulu, Hawaii, USA, April 23-27, 2006). Zednik, R. J., Baniecki, J. D., Ishii, M., McIntyre, P. C., Shioga, T. et Kurihara, K.. 2006. « Dipolar orientational glass-like behavior in Ba0.7Sr0.3TiO3 thin-films ». Communication lors de la conférence : XV IEEE International Symposium on Application of Ferroelectrics (Sunset Beach, CA, USA, July 30- Aug. 02, 2006). Zednik, R. J. et McInTyre, P. C.. 2006. « Effect of stress evolution on lead zirconium titanate thin-film phase transformations ». Communication lors de la conférence : 33rd Annual Stanford Synchrotron Radiation Lightsource Meeting (Menlo Park, CA, USA, Oct. 11-13, 2006). Rapport technique
Benoît, R., Gou, M., Bellavigna, O., Vu-Khanh, Toan, Dolez, Patricia, Arrieta, C., Nohilé, C. et Ha-Anh, T..
2006.
« Étude exploratoire sur les phénomènes d'éclatement et d'explosion de pneus de camions lourds ».
Coll. « Études et Recherches », vol. R-479.
Montréal, Canada : IRSST. 134 p.
Cardinal, Patrick.
2006.
« E-Inclusion core speech forward-backward algorithm ».
Coll. « Collection scientifique et technique », vol. CRIM-06/05-05.
Centre de recherche informatique de Montréal. 6 p.
Esmailzadeh, M., Lakis, A.A., Thomas, Marc et Marcouiller, L..
2006.
« Three dimentionnal modeling of curved structure partially or completely containing and or submerged in fluid ».
Montréal : École Polytechniquel de Montréal. 37 p.
Khayati, Karim, Bigras, Pascal et Dessaint, Louis-A..
2006.
« On force control of pneumatic actuator subject to a position tracking and a friction estimation based on lugre model ».
Coll. « Rapport technique (École de technologie supérieure) », vol. ETS-RT-2006-001.
Montréal : École de technologie supérieure. 27 p. BrevetAitchison, Paul Archibald, Germain, Patrick David et Smith, Henry (inventeurs) 3 octobre 2006. « Normally open reverse flow flapper valve ». Pratt & Whitney Canada Corp. (titulaire(s)). Brevet américain US 7,114,519 B2. Castagno, Roberto et Coulombe, Stéphane (inventeurs) 21 mars 2006. « Method for providing a terminal with coded still image signals, communications system, network element and module ». Nokia Corporation (titulaire(s)). Brevet américain US 7,016,543. Cheriet, Mohamed (inventeur) 25 avril 2006. « Method and system for measuring the energy of a signal ». Socovar (titulaire(s)). Brevet américain US 7,035,744. Coulombe, Stéphane (inventeur) 5 septembre 2006. « System for rendering multimedia messages by providing, in a multimedia message, URL for downloadable sofware to a receiving terminal ». Nokia Corporation (titulaire(s)). Brevet américain US 7,103,681. Coulombe, Stéphane, Grassel, Guido, Ware, Fred et Chitturi, Suresh (inventeurs) 9 mai 2006. « Dynamic probing and reporting of bit rate information ». Nokia Inc. (titulaire(s)). Brevet américain US 7,043,560. de Oliveira, L. E. S., Britto Jr., A. S. et Koerich, A. L. (inventeurs) mars 2006. « A method to inspect containers ». (INPI), National Institute of Industrial Property (titulaire(s)). Brevet brésilien PI0600752-0. Dell, Martin S., Dziong, Zbigniew, Li, Wei, Tota, Matthew et Wang, Yung-Terng (inventeurs) 4 avril 2006. « Three-stage switch fabric with buffered crossbar devices ». Agere Systems Inc. (titulaire(s)). Brevet américain US 7,023,841. Gagnon, François, Thibeault, Claude et Belzile, Jean (inventeurs) 19 décembre 2006. « Parallelized infinite impulse response (IIR) and integrator filters ». Socovar S.E.C., Thibeault, Claude, Belzile, Jean (titulaire(s)). Brevet américain US 7,152,084. Germain, Patrick et Bruno, Vittorio (inventeurs) 25 avril 2006. « Axisymmetric flap on gas turbine exhaust centerbody ». Pratt & Whitney Canada Corp. (titulaire(s)). Brevet américain US 7,032,387. Ridge, Justin et Coulombe, Stéphane (inventeurs) 21 septembre 2006. « Apparatus, and associated method, for altering the resolution of a digital image ». NOKIA Corporation (titulaire(s)). Brevet coréen KR 629310 B1. Robert, Jean-Marc, Howard, Brett, Kierstead, Paul et D'Souza, Scott David (inventeurs) 26 septembre 2006. « Statistical methods for detecting TCP SYN flood attacks ». Alcatel Canada Inc. (titulaire(s)). Brevet américain US 7,114,182. Thomas, Marc, Laville, Frédéric et Lafleur, François (inventeurs) 17 janvier 2006. « Modal analysis method and apparatus therefor ». Centre de recherche industrielle du Québec (titulaire(s)). Brevet canadien CA 2348320. [Titre traduit: Méthode d'analyse modale et appareil connexe]. Mémoire ou thèseAssi, Rola. 2006. « Seismic analysis of telecommunication towers mounted on building rooftops ». Thèse de doctorat. Montréal, McGill University Coallier, François. 2006. « Les pratiques en informatique d’entreprise : un modèle intégrateur ». Thèse de doctorat. Montréal, École polytechnique de Montréal, 316 p. Sanjosé, Marlène. 2006. « Étude numérique et application de la simulation aux grandes échelles pour les écoulements diphasiques ». Mémoire de maîtrise. Toulouse, France, Institut National Polytechnique de Toulouse Voix, Jérémie. 2006. « Mise au point d'un bouchon d'oreille "intelligent" ». Thèse de doctorat. Montréal, QC, Canada, École de technologie supérieure, 223 p. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau