| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Document quand le type de document est "Article publié dans une revue, révisé par les pairs" et l'année est 2019Nombre de documents archivés : 664.
Abarzadeh, Mostafa et Al-Haddad, Kamal.
2019.
« An improved active-neutral-point-clamped converter with new modulation method for ground power unit application ».
IEEE Transactions on Industrial Electronics, vol. 66, nº 1.
pp. 203-214.
Abarzadeh, Mostafa et Al-Haddad, Kamal.
2019.
« Generalized circuit topology of Qn-Hybrid-NPC multilevel converter with novel decomposed sensor-less modulation method ».
IEEE Access, vol. 7.
pp. 59813-59824.
Abarzadeh, Mostafa, Vahedi, Hani et Al-haddad, Kamal.
2019.
« Fast sensor-less voltage balancing and capacitor size reduction in PUC5 converter using novel modulation method ».
IEEE Transactions on Industrial Informatics, vol. 15, nº 8.
pp. 4394-4406.
Abasian, Foroogh, Ronnqvist, Mikael et Ouhimmou, Mustapha.
2019.
« Forest bioenergy network design under market uncertainty ».
Energy, vol. 188.
Abbad, Ahmed, Atalla, Noureddine, Ouisse, Morvan et Doutres, Olivier.
2019.
« Numerical and experimental investigations on the acoustic performances of membraned Helmholtz resonators embedded in a porous matrix ».
Journal of Sound and Vibration, vol. 459.
Abdallah, Ammar et Abran, Alain.
2019.
« Enterprise architecture measurement: an extended systematic mapping study ».
International Journal of Information Technology and Computer Science, vol. 11, nº 9.
pp. 9-19.
Abdedou, Azzedine et Soulaimani, Azzeddine.
2019.
« A non-intrusive B-splines Bézier elements-based method for uncertainty propagation ».
Computer Methods in Applied Mechanics and Engineering, vol. 345.
pp. 774-804.
Abdoli, Sajjad, Cardinal, Patrick et Lameiras Koerich, Alessandro.
2019.
« End-to-end environmental sound classification using a 1D convolutional neural network ».
Expert Systems with Applications, vol. 136.
pp. 252-263.
Abdolmanafi, Atefeh, Duong, Luc, Cheriet, Farida et Dahdah, Nagib S..
2019.
« Intra-slice motion correction of intravascular OCT images using deep features ».
IEEE Journal of Biomedical and Health Informatics, vol. 23, nº 3.
pp. 931-941.
Abedi Pahnehkolaei, Seyed Mehdi, Vahedi, Hani, Alfi, Alireza et Al-Haddad, Kamal.
2019.
« Comparative study of multi-objective finite set predictive control methods with new max-min strategy applied on a seven-level packed U-cell inverter ».
IET Power Electronics, vol. 12, nº 9.
pp. 2170-2178.
Abo El Ezz, Ahmad, Smirnoff, Alex, Nastev, Miroslav, Nollet, Marie-José et McGrath, Heather.
2019.
« ER2-Earthquake: Interactive web-application for urban seismic risk assessment ».
International Journal of Disaster Risk Reduction, vol. 34.
pp. 326-336.
Abou Daher, Nivine, Raoofat, Mahdi, Saad, Maarouf, Mougharbel, Imad, Asber, Dalal et Beltran-Galindo, Javier.
2019.
« Improve the HVAC contribution in wind power smoothing ».
Electric Power Systems Research, vol. 171.
pp. 219-229.
Abou-Rjeily, Chadi et Kaddoum, Georges.
2019.
« Optical spatial modulation for FSO IM/DD communications with photon-counting receivers: performance analysis, transmit diversity order and aperture selection ».
IEEE Journal on Selected Areas in Communications, vol. 37, nº 9.
pp. 2053-2068.
Abou-Rjeily, Chadi, Kaddoum, Georges et Karagiannidis, George Karagiannidis.
2019.
« Ground-to-air FSO communications: When high data rate communication meets efficient energy harvesting with simple designs ».
Optics Express, vol. 27, nº 23.
pp. 34079-34092.
Abuelwafa, Sherif, Pedersoli, Marco et Cheriet, Mohamed.
2019.
« Unsupervised exemplar-based learning for improved document image classification ».
IEEE Access, vol. 7.
pp. 133738-133748.
Addali, Khaled M., Melhem, Suhib Younis Bani, Khamayseh, Yaser, Zhang, Zhenjiang et Kadoch, Michel.
2019.
« Dynamic mobility load balancing for 5G small-cell networks based on utility functions ».
IEEE Access, vol. 7.
pp. 126998-127011.
Ahmadabadi, Z. Nili, Guilbault, Raynald et Laville, Frédéric.
2019.
« Nonlinear dynamic modeling of pneumatic nailing devices ».
Mathematical and Computer Modelling of Dynamical Systems, vol. 25, nº 2.
pp. 195-223.
Aissaoui, Rachid, Belaid, Sarra, Duclos, Noémie C. et Nadeau, Sylvie.
2019.
« Estimation des forces de réaction durant la marche chez l’hémiparétique dans le milieu écologique ».
[Résumé d'une communication à une conférence]. Neurophysiologie Clinique, vol. 49, nº 6.
p. 427.
Ait Abderrahmane, Hamid, Di Labbio, Giuseppe, Kim, Mira, Fayed, Mohamed, Ng, Hoi Dick et Vatistas, Geoergios H..
2019.
« Skeletons of patterned vortex cores ».
Journal of Visualization, vol. 22, nº 5.
pp. 857-865.
Ait Abderrahmane, Hamid, Kim, Mira, Di Labbio, Giuseppe, Ng, Hoi Dick et Vatistas, Georgios.
2019.
« Symmetry breaking of vortex patterns in a rotating fluid ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 64, nº 13.
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., Songmene, V. et Brochu, M..
2019.
« Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel ».
International Journal of Advanced Manufacturing Technology, vol. 104, nº 1-4.
pp. 141-157.
Al Sayed, Chady, Vinches, Ludwig, Dupuy, Olivier, Douzi, Wafa, Dugue, Benoit et Hallé, Stéphane.
2019.
« Air/CO2 cooling garment: description and benefits of use for subjects exposed to a hot and humid climate during physical activities ».
International Journal of Mining Science and Technology, vol. 29, nº 6.
pp. 899-903.
Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane.
2019.
« Novel portable cooling system for hot and humid environments using atmospheric discharge of high-pressure carbon dioxide ».
Thermal Science and Engineering Progress, vol. 11.
pp. 1-7.
Alam, Md Sahabul, Kaddoum, Georges et Agba, Basile L..
2019.
« A novel relay selection strategy of cooperative network impaired by bursty impulsive noise ».
IEEE Transactions on Vehicular Technology, vol. 68, nº 7.
pp. 6622-6635.
Alameh, Abdul Hafiz, Gratuze, Mathieu et Nabki, Frederic.
2019.
« Impact of geometry on the performance of cantilever-based piezoelectric vibration energy harvesters ».
IEEE Sensors Journal, vol. 19, nº 22.
pp. 10316-10326.
Alazzam, Anas, Alamoodi, Nahla, Abutayeh, Mohammad, Stiharu, Ion et Nerguizian, Vahé.
2019.
« Fabrication of porous gold film using graphene oxide as a sacrificial layer ».
Materials, vol. 12, nº 14.
Alazzam, Anas, Al-Khaleel, Mohammad, Riahi, Mohamed Kamel, Mathew, Bobby, Gawanmeh, Amjad et Nerguizian, Vahé.
2019.
« Dielectrophoresis multipath focusing of microparticles through perforated electrodes in microfluidic channels ».
Biosensors, vol. 9, nº 3.
Alfaifi, Ahmad, Alhomoudi, Ibrahim A., Nabki, Frederic et El-Gamal, Mourad N..
2019.
« In-plane high-sensitivity capacitive accelerometer in a 3-D CMOS-compatible surface micromachining process ».
Journal of Microelectromechanical Systems, vol. 28, nº 1.
pp. 14-24.
Al-Hashedi, Ashwaq A., Laurenti, Marco, Amine Mezour, Mohamed, Basiri, Tayebeh, Touazine, Heithem, Jahazi, Mohamed et Tamimi, Faleh.
2019.
« Advanced inorganic nanocomposite for decontaminating titanium dental implants ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 107, nº 3.
pp. 761-772.
Ali, Ahmed H., Mohamed, Hamdy M., Benmokrane, Brahim, ElSafty, Adel et Chaallal, Omar.
2019.
« Durability performance and long-term prediction models of sand-coated basalt FRP bars ».
Composites Part B: Engineering, vol. 157.
pp. 248-258.
Alimian, Mahyar, Saidi-Mehrabad, Mohammad et Jabbarzadeh, Armin.
2019.
« A robust integrated production and preventive maintenance planning model for multi-state systems with uncertain demand and common cause failures ».
Journal of Manufacturing Systems, vol. 50.
pp. 263-277.
Alinejad, Yasaman, Adoungotchodo, Atma, Grant, Michael P., Epure, Laura M., Antoniou, John, Mwale, Fackson et Lerouge, Sophie.
2019.
« Injectable chitosan hydrogels with enhanced mechanical properties for nucleus pulposus regeneration ».
Tissue Engineering - Part A, vol. 25, nº 5-6.
pp. 303-313.
Alkayyali, T., Cameron, T., Haltli, B., Kerr, R. G. et Ahmadi, A..
2019.
« Microfluidic and cross-linking methods for encapsulation of living cells and bacteria - A review ».
Analytica Chimica Acta, vol. 1053.
pp. 1-21.
Almadwi, Fathi S. et Assaf, Gabriel J..
2019.
« Effects of asphalt binders on pavement mixtures using an optimal balance of desert sand ».
Construction and Building Materials, vol. 220.
pp. 415-425.
Almarimi, Nuri, Ouni, Ali, Bouktif, Salah, Mkaouer, Mohamed Wiem, Kula, Raula Gaikovina et Saied, Mohamed Aymen.
2019.
« Web service API recommendation for automated mashup creation using multi-objective evolutionary search ».
Applied Soft Computing, vol. 85.
Alosco, M. L., Tripodis, Y., Koerte, I. K., Jackson, J. D., Chua, A. S., Mariani, M., Haller, O., Foley, É M., Martin, B. M., Palmisano, J., Singh, B., Green, K., Lepage, C., Muehlmann, M., Makris, N., Cantu, R. C., Lin, A. P., Coleman, M., Pasternak, O., Mez, J., Bouix, S., Shenton, M. E. et Stern, R. A..
2019.
« Interactive effects of racial identity and repetitive head impacts on cognitive function, structural mri-derived volumetric measures, and cerebrospinal fluid tau and Aβ ».
Frontiers in Human Neuroscience, vol. 13.
Al-Osta, Mahmud, Bali, Ahmed et Gherbi, Abdelouahed.
2019.
« Event driven and semantic based approach for data processing on IoT gateway devices ».
Journal of Ambient Intelligence and Humanized Computing, vol. 10, nº 12.
pp. 4663-4678.
Alqaisi, Walid, Brahmi, Brahim, Ghommam, Jawhar, Saad, Maarouf et Nerguizian, Vahé.
2019.
« Vision-based leader-follower approach for uncertain quadrotor dynamics using feedback linearisation sliding mode control ».
International Journal of Modelling, Identification and Control, vol. 33, nº 1.
pp. 9-19.
Al-Terkawi Hasib, Omar, Savaria, Yvon et Thibeault, Claude.
2019.
« Multi-PVT-point analysis and comparison of recent small-delay defect quality metrics ».
Journal of Electronic Testing: Theory and Applications (JETTA), vol. 35, nº 6.
pp. 823-838.
Alzidani, Mahmoud et Dao, Thien-My.
2019.
« Optimization of the cellular manufacturing scheduling using the RC-filter and EGD hybrid Meta-heuristics Approach ».
International Journal on Interactive Design and Manufacturing, vol. 13, nº 4.
pp. 1549-1556.
Amazal, Fatima Azzahra, Idri, Ali et Abran, Alain.
2019.
« Analysis of cluster center initialization of 2FA-kprototypes analogy-based software effort estimation ».
Journal of Software: Evolution and Process, vol. 31, nº 12.
Amhadi, Talal S. et Assaf, Gabriel J..
2019.
« Assessment of strength development of cemented desert soil ».
International Journal of Low-Carbon Technologies, vol. 14, nº 4.
pp. 543-549.
Amiri, M., Sadjadi, S.J., Tavakkoli-Moghaddam, R. et Jabbarzadeh, A..
2019.
« Optimal fleet composition and mix periodic location-routing problem with time windows in an offshore oil and gas industry: A case study of National Iranian Oil Company ».
Scientia Iranica : Transaction E: Industrial Engineering, vol. 26, nº 1.
pp. 522-537.
Amiri, Mohsen, Sadjadi, Seyed Jafar, Tavakkoli-Moghaddam, Reza et Jabbarzadeh, Armin.
2019.
« An integrated approach for facility location and supply vessel planning with time windows ».
Journal of Optimization in Industrial Engineering, vol. 12, nº 1.
pp. 151-165.
Amirkhan, F., Sakata, R., Takiguchi, K., Arikawa, T., Ozaki, T., Tanaka, K. et Blanchard, F..
2019.
« Characterization of thin-film optical properties by THz near-field imaging method ».
Journal of the Optical Society of America B: Optical Physics, vol. 36, nº 9.
pp. 2593-2601.
Aoun, Alain, Ibrahim, Hussein, Ghandour, Mazen et Ilinca, Adrian.
2019.
« Supply side management vs. Demand side management of a residential microgrid equipped with an electric vehicle in a dual tariff scheme ».
Energies, vol. 12, nº 22.
Apocalypse, Henrique Santos, Pereira, Gabriel Iauci, de Souza Fernandes, Leandro, de Paula Ferreira, William et da Silva, Adriano Maniçoba.
2019.
« Caminho para escola: mobilidade e acessibilidade na percepção dos alunos do IFSP-Campus Suzano ».
CIENTEC-Revista de Ciência, Tecnologia e Humanidades do IFPE, vol. 10, nº 1.
pp. 21-36.
Arab, Naima, Kedjar, Bachir, Javadi, Alireza et Al Haddad, Kamal.
2019.
« A multifunctional single-phase grid-integrated residential solar PV systems based on LQR control ».
IEEE Transactions on Industry Applications, vol. 55, nº 2.
pp. 2099-2109.
Arfaoui, Mohamed Ameur, Dolez, Patricia I., Dubé, Martine et David, Éric.
2019.
« Preparation of a hydrophobic recycled jute-based nonwoven using a titanium dioxide/stearic acid coating ».
Journal of the Textile Institute, vol. 110, nº 1.
pp. 16-25.
Arras, W., Hussain, A., Hausler, R. et Guiot, S. R..
2019.
« Mesophilic, thermophilic and hyperthermophilic acidogenic fermentation of food waste in batch: Effect of inoculum source ».
Waste Management, vol. 87.
pp. 279-287.
Arroyo, Carlos Pérez, Leonard, Thomas, Sanjosé, Marlène, Moreau, Stéphane et Duchaine, Florent.
2019.
« Large Eddy Simulation of a scale-model turbofan for fan noise source diagnostic ».
Journal of Sound and Vibration, vol. 445.
pp. 64-76.
Arsenault, Richard, Breton-Dufour, Mélissa, Poulin, Annie, Dallaire, Gabrielle et Romero-Lopez, Rabindranarth.
2019.
« Streamflow prediction in ungauged basins: analysis of regionalization methods in a hydrologically heterogeneous region of Mexico ».
Hydrological Sciences Journal, vol. 64, nº 11.
pp. 1297-1311.
Arsenault, Richard et Côté, Pascal.
2019.
« Analysis of the effects of biases in ensemble streamflow prediction (ESP) forecasts on electricity production in hydropower reservoir management ».
Hydrology and Earth System Sciences, vol. 23, nº 6.
pp. 2735-2750.
Arunachalam, Shivaram, Izquierdo, Ricardo et Nabki, Frederic.
2019.
« Low-hysteresis and fast response time humidity sensors using suspended functionalized carbon nanotubes ».
Sensors, vol. 19, nº 3.
Assid, M., Gharbi, A. et Hajji, A..
2019.
« Production and setup control policy for unreliable hybrid manufacturing-remanufacturing systems ».
Journal of Manufacturing Systems, vol. 50.
pp. 103-118.
Assid, M., Gharbi, A. et Hajji, A..
2019.
« Production planning of an unreliable hybrid manufacturing-remanufacturing system under uncertainties and supply constraints ».
Computers and Industrial Engineering, vol. 136.
pp. 31-45.
Asuo, Ivy M., Fourmont, Paul, Ka, Ibrahima, Gedamu, Dawit, Bouzidi, Soraya, Pignolet, Alain, Nechache, Riad et Cloutier, Sylvain G..
2019.
« Highly efficient and ultrasensitive large-area flexible photodetector based on perovskite nanowires ».
Small, vol. 15, nº 1.
Asuo, Ivy M., Ka, Ibrahima, Gedamu, Dawit, Pignolet, Alain, Nechache, Riad et Cloutier, Sylvain G..
2019.
« Tunable thiocyanate-doped perovskite microstructure via water-ethanol additives for stable solar cells at ambient conditions ».
Solar Energy Materials and Solar Cells, vol. 200.
Atallah, Michael, Alam, Md. Sahabul et Kaddoum, Georges.
2019.
« Secrecy analysis of wireless sensor network in smart grid with destination assisted jamming ».
IET Communications, vol. 13, nº 12.
pp. 1748-1752.
Atallah, Michael et Kaddoum, Georges.
2019.
« Design and performance analysis of secure multicasting cooperative protocol for wireless sensor network applications ».
IEEE Wireless Communications Letters, vol. 8, nº 5.
pp. 1468-1472.
Atallah, Michael et Kaddoum, Georges.
2019.
« Secrecy analysis in wireless network with passive eavesdroppers by using partial cooperation ».
IEEE Transactions on Vehicular Technology, vol. 68, nº 7.
pp. 7225-7230.
Au, Minh, Kaddoum, Georges, Alam, Md Sahabul, Basar, Ertugrul et Gagnon, Francois.
2019.
« Joint code-frequency index modulation for IoT and multi-user communications ».
IEEE Journal on Selected Topics in Signal Processing, vol. 13, nº 6.
pp. 1223-1236.
Aubeelack, Hema et Botez, Ruxandra Mihaela.
2019.
« Simulation study of the aerodynamic force distributions on the UAS-S45 baalam wing with an upswept blended winglet ».
INCAS Bulletin, vol. 11, nº 1.
pp. 21-38.
Aubert, B., Vazquez, C., Cresson, T., Parent, S. et de Guise, J. A..
2019.
« Toward automated 3D spine reconstruction from biplanar radiographs using CNN for statistical spine model fitting ».
IEEE Transactions on Medical Imaging, vol. 38, nº 12.
pp. 2796-2806.
Aujla, Gagangeet Singh, Chaudhary, Rajat, Kaur, Kuljeet, Garg, Sahil, Kumar, Neeraj et Ranjan, Rajiv.
2019.
« SAFE: SDN-assisted framework for edge-cloud interplay in secure healthcare ecosystem ».
IEEE Transactions on Industrial Informatics, vol. 15, nº 1.
pp. 469-480.
Avelino, Guilherme, Passos, Leonardo, Petrillo, Fabio et Valente, Marco Tulio.
2019.
« Who can maintain this code?: Assessing the effectiveness of repository-mining techniques for identifying software maintainers ».
IEEE Software, vol. 36, nº 6.
pp. 34-42.
Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim.
2019.
« Evaluation of interfacial and permeation leaks in gaskets and compression packing ».
Journal of Nuclear Engineering and Radiation Science, vol. 5, nº 1.
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Kazeminia, Mehdi.
2019.
« Predicting leak rate through valve stem packing in nuclear applications ».
Journal of Nuclear Engineering and Radiation Science, vol. 5, nº 1.
Azizi, Sohrab, David, Eric, Fréchette, Michel F., Nguyen-Tri, Phuong et Ouellet-Plamondon, Claudiane M..
2019.
« Electrical and thermal phenomena in low-density polyethylene/carbon black composites near the percolation threshold ».
Journal of Applied Polymer Science, vol. 136, nº 6.
Azizi, Sohrab, David, Eric, Frechette, Michel F. et Ouellet-Plamondon, Claudiane M..
2019.
« Numerical simulation of the effective permittivity of low-density polyethylene composite filled by carbon black ».
IET Nanodielectrics, vol. 2, nº 4.
pp. 129-134.
Azizi, Sohrab, Ouellet-Plamondon, Claudiane, Tri, Phuong Nguyen, Fréchette, Michel et David, Eric.
2019.
« Electrical, thermal and rheological properties of low-density polyethylene/ethylene vinyl acetate/graphene-like composite ».
Composites Part B: Engineering, vol. 177.
Babanezhad, Kaveh, Foucault, Gilles, Sabri, Vahid, Tahan, Antoine et Bigeon, Jean.
2019.
« The fixtureless inspection of flexible parts based on semi-geodesic distance ».
Precision Engineering, vol. 59.
pp. 174-184.
Babin, Vincent, St-Onge, David et Gosselin, Clément.
2019.
« Stable and repeatable grasping of flat objects on hard surfaces using passive and epicyclic mechanisms ».
Robotics and Computer-Integrated Manufacturing, vol. 55, nº Part A.
pp. 1-10.
Bachiri, Mariam, Idri, Ali, Abran, Alain, M. Redman, Leanne et Fernández-Alemán, José Luis.
2019.
« Sizing prenatal mPHRs using COSMIC measurement method ».
Journal of Medical Systems, vol. 43, nº 10.
Bag, Amrita, Delbergue, Dorian, Bocher, Philippe, Lévesque, Martin et Brochu, Myriam.
2019.
« Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel ».
International Journal of Fatigue, vol. 118.
pp. 126-138.
Bahig, Houda, Lapointe, Andréanne, Bedwani, Stéphane, de Guise, Jacques, Lambert, Louise, Filion, Edith, Roberge, David, Létourneau-Guillon, Laurent, Blais, Danis, Ng, Sweet Ping et Nguyen-Tan, Phuc Félix.
2019.
« Dual-energy computed tomography for prediction of loco-regional recurrence after radiotherapy in larynx and hypopharynx squamous cell carcinoma ».
European Journal of Radiology, vol. 110.
pp. 1-6.
Bahloul, Ali, Djebara, Abdelhakim, Saidi, Mohamed Nejib, Songmene, Victor, Villalpando, Fernando et Reggio, Marcelo.
2019.
« Computational and experimental analysis of ultrafine particle dispersion during granite polishing ».
Aerosol Science and Engineering, vol. 3, nº 1.
pp. 21-31.
Baker, Fiona C., Forouzanfar, Mohamad, Goldstone, Aimée M., Claudatos, Stephanie A, Javitz, Harold, Trinder, John et Zambotti, Massimiliano de.
2019.
« 0684 Impact of hot flash-associated sleep disruption on the cardiovascular system in perimenopausal women ».
[Résumé d'une communication à une conférence]. Sleep, vol. 42, nº Suppl. 1.
A274.
Baker, Fiona C., Forouzanfar, Mohamad, Goldstone, Aimée, Claudatos, Stephanie A., Javitz, Harold, Trinder, John et de Zambotti, Massimiliano.
2019.
« Changes in heart rate and blood pressure during nocturnal hot flashes associated with and without awakenings ».
Sleep, vol. 42, nº 11.
Bakhta, Athmane, Leclaire, Sébastien, Vidal, David, Bertrand, François et Cheriet, Mohamed.
2019.
« Multiscale simulation of ink seepage into paper: a mesoscopic variational model ».
Computer Physics Communications, vol. 239.
Banerjee, Debika, Asuo, Ivy M., Pignolet, Alain et Cloutier, Sylvain G..
2019.
« Low-cost photodetector architectures fabricated at room-temperature using nano-engineered silicon wafer and sol-gel TiO2 – based heterostructures ».
Scientific Reports, vol. 9, nº 1.
Basakayi, J. et Ilinca, A..
2019.
« Selection and ranking of phase change materials for a latent heat storage by using super decisions software V3 ».
JP Journal of Heat and Mass Transfer, vol. 17, nº 2.
pp. 341-364.
Basakayi, J. et Ilinca, A..
2019.
« TOPSIS method for supporting the selection and ranking of phase change materials for a latent heat storage ».
International Journal Of Engineering Research & Technology, vol. 8, nº 4.
pp. 597-605.
Batista, Natassia L., Helal, Emna, Kurusu, Rafael S., Moghimian, Nima, David, Eric, Demarquette, Nicole R. et Hubert, Pascal.
2019.
« Mass-produced graphene—HDPE nanocomposites: Thermal, rheological, electrical, and mechanical properties ».
Polymer Engineering and Science, vol. 59, nº 4.
pp. 675-682.
Bazrafshan, Amir, Taherzadeh-Sani, Mohammad et Nabki, Frederic.
2019.
« An analog LO harmonic suppression technique for SDR receivers ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 27, nº 1.
pp. 182-192.
Beca, AL, Shimabuku, E, da Silva, AM, Tanaka, WY et de Paula Ferreira, W..
2019.
« Aplicação da teoria das restrições no transporte público: estudo de caso em uma linha de ônibus na cidade de São Paulo ».
Exacta, vol. 17, nº 2.
pp. 119-133.
Beji, Sofiene, Hamadou, Sardaouna, Mullins, John et Gherbi, Abdelouahed.
2019.
« Iterative integration of TTEthernet network flows ».
International Journal of Critical Computer-Based Systems, vol. 9, nº 3.
pp. 167-192.
Ben Attia, Maroua, Nguyen, Kim-Khoa et Cheriet, Mohamed.
2019.
« Dynamic QoE/QoS-Aware queuing for heterogeneous traffic in smart home ».
IEEE Access, vol. 7.
pp. 58990-59001.
Ben Trad, Mohamed Aziz, Demers, Vincent et Dufresne, Louis.
2019.
« Effect of powder shape and size on rheological, thermal, and segregation properties of low-pressure powder injection molding feedstocks ».
Journal of Materials Engineering and Performance, vol. 28, nº 9.
pp. 5551-5562.
Benacchio, Simon, Doutres, Olivier, Varoquaux, Arthur, Wagnac, Éric, Le Troter, Arnaud, Callot, Virginie et Sgard, Franck.
2019.
« Use of magnetic resonance image registration to estimate displacement in the human earcanal due to the insertion of in-ear devices ».
The Journal of the Acoustical Society of America, vol. 146, nº 4.
pp. 2452-2465.
Benadda, Mohamed, Bouzidane, Ahmed, Thomas, Marc et Guilbault, Raynald.
2019.
« Dynamic behavior analysis of a rigid rotor supported by hydrostatic squeeze film dampers compensated with new electrorheological valve restrictors ».
Industrial Lubrication and Tribology, vol. 72, nº 5.
pp. 611-619.
Benadja, Mounir, Rezkallah, Miloud, Benhalima, Seghir, Hamadi, Abdelhamid et Chandra, Ambrish.
2019.
« Hardware testing of sliding mode controller for improved performance of VSC-HVDC based offshore wind farm under DC fault ».
IEEE Transactions on Industry Applications, vol. 55, nº 2.
pp. 2053-2063.
Bénar, C. G., Grova, C., Jirsa, V. K. et Lina, J. M..
2019.
« Differences in MEG and EEG power-law scaling explained by a coupling between spatial coherence and frequency: a simulation study ».
Journal of Computational Neuroscience, vol. 47, nº 1.
pp. 31-41.
Benariba, Aboubakeur, Bouzidane, Ahmed et Thomas, Marc.
2019.
« Analytical analysis of a rigid rotor mounted on three hydrostatic pads lubricated with micropolar fluids ».
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 233, nº 6.
pp. 859-869.
Benchaabane, Youssef, Silva, Rosa Elvira, Ibrahim, Hussein, Ilinca, Adrian, Chandra, Ambrish et Rousse, Daniel R..
2019.
« Computer model for financial, environmental and risk analysis of a wind-diesel hybrid system with compressed air energy storage ».
Energies, vol. 12, nº 21.
Benhalima, Seghir, Chandra, Ambrish et Rezkallah, Miloud.
2019.
« Real-time experimental implementation of an LMS-adaline-based ANFIS controller to drive PV interfacing power system ».
IET Renewable Power Generation, vol. 13, nº 7.
pp. 1142-1152.
Benmakrelouf, Souhila, Kara, Nadjia, Tout, Hanine, Rabipour, Rafi et Edstrom, Claes.
2019.
« Resource needs prediction in virtualized systems: generic proactive and self-adaptive solution ».
Journal of Network and Computer Applications, vol. 148.
Benni, Benjamin, Mosser, Sébastien, Moha, Naouel et Riveill, Michel.
2019.
« A delta-oriented approach to support the safe reuse of black-box code rewriters ».
[Article de conférence]. Journal of Software: Evolution and Process, vol. 31, nº 8.
Bensalma, Fatima, Mezghani, Neila, Ouakrim, Youssef, Fuentes, Alexandre, Choiniere, Manon, Bureau, Nathalie J., Durand, Madelaine et Hagemeister, Nicola.
2019.
« A multivariate relationship between the kinematic and clinical parameters of knee osteoarthritis population ».
Biomedical Engineering Online, vol. 18.
Benzeguir, Zine El Abidine, El-Saikaly, Georges et Chaallal, Omar.
2019.
« Size effect in RC T-beams strengthened in shear with externally-bonded CFRP sheets: experimental study ».
Journal of Composites for Construction, vol. 23, nº 6.
Benzerrouk, Hamza, Nguyen, Quang, Xiaoxing, Fang, Amrhar, Abdessamad, Rasaee, Hamza et Landry, Rene Jr.
2019.
« LEO satellites based Doppler positioning using distributed nonlinear estimation ».
[Article de conférence]. IFAC-PapersOnLine, vol. 52, nº 12.
pp. 496-501.
Benzid, Djedjiga et Kadoch, Michel.
2019.
« Raptor code and massive MiMo for secure wireless delivery in 5G ».
Journal of Electrical and Electronic Engineering, vol. 7, nº 6.
Berger, Maxime, Kocar, Ilhan, Fortin-Blanchette, Handy et Lavertu, Carl.
2019.
« Large-signal modeling of three-phase dual active bridge converters for electromagnetic transient analysis in DC grids ».
Journal of Modern Power Systems and Clean Energy, vol. 7, nº 6.
pp. 1684-1696.
Berghout, Belkacem et Forgues, Daniel.
2019.
« Passive ambient comfort and correlation of strategies and vernacular devices for habitat design in arid zones: the case of Biskra, Algeria ».
Buildings, vol. 9, nº 4.
Berghout, Belkacem et Forgues, Daniel.
2019.
« The passive ambient comfort and design integration feasibility of vernacular devices in arid housing ».
International Journal of Global Environmental Issues, vol. 18, nº 3.
pp. 249-269.
Bertrand, Rémi, Robe, Hugo, Texier, Damien, Zedan, Yasser, Feulvarch, Eric et Bocher, Philippe.
2019.
« Analysis of AA2XXX/AA7XXX friction stir welds ».
Journal of Materials Processing Technology, vol. 271.
pp. 312-324.
Bethell, Erin M., Ernst, Richard E. et Samson, Claire.
2019.
« Geology of the Alpha Regio (V-32) quadrangle, Venus ».
Journal of Maps, vol. 15, nº 2.
pp. 474-486.
Bettouche, Y., Obeidat, H., Agba, B., Kouki, A., Alhassan, H., Rodriguez, Jonathan, Abd-Alhameed, R. et Jones, S..
2019.
« Long-term evolution of the surface refractivity for Arctic regions ».
Radio Science, vol. 54, nº 7.
pp. 602-611.
Bianchetti, C., Delbergue, D., Bocher, Philippe, Levesque, M. et Brochu, M..
2019.
« Analytical fatigue life prediction of shot peened AA 7050-T7451 ».
International Journal of Fatigue, vol. 118.
pp. 271-281.
Binh-Son, Hua, Gruson, Adrien, Petitjean, Victor, Zwicker, Matthias, Nowrouzezahrai, Derek, Eisemann, Elmar et Hachisuka, Toshiya.
2019.
« A survey on gradient-domain rendering ».
Computer Graphics Forum, vol. 38, nº 2.
pp. 455-472.
Blache, Y., Dumas, R., de Guise, J., Saithna, A., Sonnery-Cottet, B. et Thaunat, M..
2019.
« Technical considerations in lateral extra-articular reconstruction coupled with anterior cruciate ligament reconstruction: A simulation study evaluating the influence of surgical parameters on control of knee stability ».
Clinical Biomechanics, vol. 61.
pp. 136-143.
Blache, Yoann, Kouevidjin, Biova, de Guise, Jacques, Dumas, Raphaël, Saithna, Adnan, Sonnery-Cottet, Bertrand et Thaunat, Mathieu.
2019.
« Comportement de la reconstruction latérale du genou lors d’une flexion de genou en charge et d’un pivot-shift : une étude de simulation ».
Revue de Chirurgie Orthopédique et Traumatologique, vol. 105, nº 4.
pp. 446-451.
Blache, Yoann, Kouevidjin, Biova, de Guise, Jacques, Dumas, Raphaël, Saithna, Adnan, Sonnery-Cottet, Bertrand et Thaunat, Mathieu.
2019.
« Lateral extra-articular reconstruction length changes during weightbearing knee flexion and pivot shift: A simulation study ».
Orthopaedics & Traumatology: Surgery & Research, vol. 105, nº 4.
pp. 661-667.
Blakeney, William, Clément, Julien, Desmeules, François, Hagemeister, Nicola, Rivière, Charles et Vendittoli, Pascal-André.
2019.
« Kinematic alignment in total knee arthroplasty better reproduces normal gait than mechanical alignment ».
Knee Surgery, Sports Traumatology, Arthroscopy, vol. 27, nº 5.
pp. 1410-1417.
Blanchard, François, Nkeck, Joel Edouard, Matte, Dominique, Nechache, Riad et Cooke, David G..
2019.
« A low-cost terahertz camera ».
Applied Sciences, vol. 9, nº 12.
Blancke, Olivier, Combette, Amélie, Amyot, Normand, Komljenovic, Dragan, Lévesque, Mélanie, Hudon, Claude, Tahan, Antoine et Zerhouni, Noureddine.
2019.
« A predictive maintenance approach for complex equipment based on a failure mechanism propagation model ».
International Journal of Prognostics and Health Management, vol. 10, nº 1.
Blasco-Lopez, Monica, Hausler, Robert, Romero-Lopez, Rabindranarth, Glaus, Mathias et Diaz-Sobac, Rafael.
2019.
« Exploring whether data can be represented as a composite unit in form processing using the manufacturing of information approach ».
Information, vol. 10, nº 5.
Bohlooli Arkhazloo, Nima, Bouissa, Yassine, Bazdidi-Tehrani, Farzad, Jadidi, Mohammad, Morin, Jean-Benoit et Jahazi, Mohammad.
2019.
« Experimental and unsteady CFD analyses of the heating process of large size forgings in a gas-fired furnace ».
Case Studies in Thermal Engineering, vol. 14.
Bonnet, Fabien, Nélisse, Hugues, Nogarolli, Marcos A. C. et Voix, Jérémie.
2019.
« In-ear noise dosimetry under earplug: Method to exclude wearer-induced disturbances ».
International Journal of Industrial Ergonomics, vol. 74.
pp. 139-148.
Botez, Ruxandra Mihaela, Bardela, Paul-Alexandre et Bournisien, Thomas.
2019.
« Cessna Citation X simulation turbofan modelling: identification and identified model validation using simulated flight tests ».
Aeronautical Journal, vol. 123, nº 1262.
pp. 433-463.
Bouchami, Anoir, Elsayed, Mohannad Y. et Nabki, Frederic.
2019.
« A Sub-mW 18-MHz MEMS oscillator based on a 98-dBΩ adjustable bandwidth transimpedance amplifier and a Lamé-mode resonator ».
Sensors, vol. 19, nº 12.
Bouchet, Mélusine, Gauthier, Matthieu, Maire, Marion, Ajji, Abdellah et Lerouge, Sophie.
2019.
« Towards compliant small-diameter vascular grafts: predictive analytical model and experiments ».
Materials Science and Engineering C, vol. 100.
pp. 715-723.
Bouissa, Yassine, Shahriari, Davood, Champliaud, Henri et Jahazi, Mohammad.
2019.
« Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ».
Case Studies in Thermal Engineering, vol. 13.
Boujia, Nissrine, Schmidt, Franziska, Chevalier, Christophe, Siegert, Dominique et Van Bang, Damien Pham.
2019.
« Effect of scour on the natural frequency responses of bridge piers: Development of a scour depth sensor ».
Infrastructures, vol. 4, nº 2.
Boukharata, Sabrine, Ouni, Ali, Kessentini, Marouane, Bouktif, Salah et Wang, Hanzhang.
2019.
« Improving web service interfaces modularity using multi-objective optimization ».
Automated Software Engineering, vol. 26, nº 2.
275–312.
Bouktif, Salah, Fiaz, Ali, Ouni, Ali et Serhani, Mohamed Adel.
2019.
« Single and multi-sequence deep learning models for short and medium term electric load forecasting ».
Energies, vol. 12, nº 1.
Bouland, C., Urlea, V., Beaubier, K., Samoilenko, M. et Brailovski, V..
2019.
« Abrasive flow machining of laser powder bed-fused parts: numerical modeling and experimental validation ».
Journal of Materials Processing Technology, vol. 273.
Bourgeois, François-René et Monette, Frédéric.
2019.
« Approches opérationnelles pour favoriser la nitrification dans un biofiltre aéré à flux descendant ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 46, nº 1.
pp. 38-47.
Bouserhal, Rachel E., Bernier, Antoine et Voix, Jérémie.
2019.
« An in-ear speech database in varying conditions of the audio-phonation loop ».
Journal of the Acoustical Society of America, vol. 145, nº 2.
pp. 1069-1077.
Bouyerbou, Hafidha, Bechkoum, Kamal et Lepage, Richard.
2019.
« Geographic ontology for major disasters: Methodology and implementation ».
International Journal of Disaster Risk Reduction, vol. 34.
pp. 232-242.
Bouzid, Abdel-Hakim et Aweimer, Ali Salah Omar.
2019.
« On the use of gas flow models to predict leak rates through sheet gasket materials ».
Journal of Pressure Vessel Technology, vol. 141, nº 5.
Bouzid, Abdel-Hakim et Pourreza, Mohammad.
2019.
« Analysis of residual stresses in the transition zone of tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology, vol. 141, nº 4.
Brabra, Hayet, Mtibaa, Achraf, Petrillo, Fabio, Merle, Philippe, Sliman, Layth, Moha, Naouel, Gaaloul, Walid, Guéhéneuc, Yann-Gäel, Benatallah, Boualem et Gargouri, Faïez.
2019.
« On semantic detection of cloud API (anti)patterns ».
Information and Software Technology, vol. 107.
pp. 65-82.
Brahmi, Abdelkrim, Saad, Maarouf, Gauthier, Guy, Zhu, Wen-Hong et Ghommam, Jawhar.
2019.
« Adaptive backstepping control of multi-mobile manipulators handling a rigid object in coordination ».
International Journal of Modelling, Identification and Control, vol. 31, nº 2.
pp. 169-181.
Brahmi, Brahim, Brahmi, Abdelkrim, Saad, Maarouf, Gauthier, Guy et Habibur Rahman, Mohammad.
2019.
« Robust adaptive tracking control of uncertain rehabilitation exoskeleton robot ».
Journal of Dynamic Systems, Measurement and Control, vol. 141, nº 12.
Brahmi, Brahim, Laraki, Mohamed Hamza, Saad, Maarouf, Rahman, M. H., Ochoa-Luna, Cristobal et Brahmi, Abdelkrim.
2019.
« Compliant adaptive control of human upper-limb exoskeleton robot with unknown dynamics based on a Modified Function Approximation Technique (MFAT) ».
Robotics and Autonomous Systems, vol. 117.
pp. 92-102.
Brahmi, Brahim, Saad, Maarouf, Ochoa-Luna, Cristobal, Rahman, Mohammad H. et Brahmi, Abdelkrim.
2019.
« Novel adaptive iterative observer based on integral backstepping control of a wearable robotic exoskeleton ».
International Journal of Computer Applications in Technology, vol. 60, nº 2.
pp. 154-164.
Brahmi, Brahim, Saad, Maarouf, Rahman, Mohammad H. et Ochoa-Luna, Cristobal.
2019.
« Cartesian trajectory tracking of a 7-DOF exoskeleton robot based on human inverse kinematics ».
IEEE Transactions on Systems, Man, and Cybernetics: Systems, vol. 49, nº 3.
pp. 600-611.
Brassard, David, Dubé, Martine et Tavares, Jason R..
2019.
« Resistance welding of thermoplastic composites with a nanocomposite heating element ».
Composites Part B: Engineering, vol. 165.
pp. 779-784.
Bretin, R., Levesque, M. et Bocher, P..
2019.
« Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 Finite element study of the interaction between grains ».
International Journal of Solids and Structures, vol. 176-177.
pp. 36-48.
Bretin, R., Levesque, M. et Bocher, P..
2019.
« Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 - Cellular Automaton ».
International Journal of Solids and Structures, vol. 176-177.
pp. 49-67.
Brini, Oussama, Deslandes, Dominic et Nabki, Frederic.
2019.
« A system-level methodology for the design of reliable low-power wireless sensor networks ».
Sensors, vol. 19, nº 8.
Brown, David A., Nadarajah, Siva, Yang, Hong, Castonguay, Patrice, Raiesi, Hassan, Sermeus, Kurt et Germain, Patrick.
2019.
« Quality-preserving linear elasticity mesh movement algorithm for multi-element unstructured meshes ».
AIAA Journal, vol. 57, nº 2.
pp. 521-531.
Brunet, Maude et Forgues, Daniel.
2019.
« Investigating collective sensemaking of a major project success ».
International Journal of Managing Projects in Business, vol. 12, nº 3.
pp. 644-665.
Brunet, Maude, Motamedi, Ali, Guénette, Louis-Martin et Forgues, Daniel.
2019.
« Analysis of BIM use for asset management in three public organizations in Québec, Canada ».
Built Environment Project and Asset Management, vol. 9, nº 1.
pp. 153-167.
Bruyneel, Anne-Violette, Aissaoui, Rachid, Mesure, Serge, Robert, Thomas et Nadeau, Sylvie.
2019.
« Caractérisation de la mobilité des visiteurs lors d’une visite muséale aux musées des Beaux-Arts de Montréal ».
[Résumé d'une communication à une conférence]. Neurophysiologie Clinique, vol. 49, nº 6.
p. 411.
Bulle, Cécile, Margni, Manuele, Patouillard, Laure, Boulay, Anne-Marie, Bourgault, Guillaume, De Bruille, Vincent, Cao, Viêt, Hauschild, Michael, Henderson, Andrew, Humbert, Sebastien, Kashef-Haghighi, Sormeh, Kounina, Anna, Laurent, Alexis, Levasseur, Annie, Liard, Gladys, Rosenbaum, Ralph K., Roy, Pierre-Olivier, Shaked, Shanna, Fantke, Peter et Jolliet, Olivier.
2019.
« IMPACT World+: a globally regionalized life cycle impact assessment method ».
International Journal of Life Cycle Assessment, vol. 24, nº 9.
pp. 1653-1674.
Buticchi, Giampaolo, Bozhko, Serhiy, Liserre, Marco, Wheeler, Patrick et Al-Haddad, Kamal.
2019.
« On-board microgrids for the more electric aircraft - technology review ».
IEEE Transactions on Industrial Electronics, vol. 66, nº 7.
pp. 5588-5599.
Buticchi, Giampaolo, Liserre, Marco et Al-Haddad, Kamal.
2019.
« On-board microgrids for the more electric aircraft ».
IEEE Transactions on Industrial Electronics, vol. 66, nº 7.
pp. 5585-5587.
Cagnin, A., Choinière, M., Bureau, N. J., Durand, M., Mezghani, N., Gaudreault, N. et Hagemeister, N..
2019.
« Effective conservative care targeting mechanical markers as risk factors for knee osteoarthritis progression: a cluster randomized controlled trial ».
[Résumé d'une communication à une conférence]. Osteoarthritis and Cartilage, vol. 27, nº Suppl. 1.
S485-S486.
Cagnin, A., Choinière, M., Bureau, N. J., Durand, M., Mezghani, N., Gaudreault, N. et Hagemeister, N..
2019.
« Impact of a personalized home exercise program for knee osteoarthritis patients on 3D kinematics: a cluster randomized controlled trial ».
[Résumé d'une communication à une conférence]. Osteoarthritis and Cartilage, vol. 27, nº Suppl. 1.
S34-S36.
Cao, Hongliu, Bernard, Simon, Sabourin, Robert et Heutte, Laurent.
2019.
« Random forest dissimilarity based multi-view learning for Radiomics application ».
Pattern Recognition, vol. 88.
pp. 185-197.
Cappai, Francesco, Forgues, Daniel et Glaus, Mathias.
2019.
« A methodological approach for evaluating brownfield redevelopment projects ».
Urban Science, vol. 3, nº 2.
Carbonneau, Marc-André, Granger, Eric et Gagnon, Ghyslain.
2019.
« Bag-level aggregation for multiple-instance active learning in instance classification problems ».
IEEE Transactions on Neural Networks and Learning Systems, vol. 30, nº 5.
pp. 1441-1451.
Caron, Raymond M., Samson, Claire, Bates, Martin et Chouteau, Michel.
2019.
« Correcting airborne gravity data for overburden thickness: a case study from the Nechako interior plateau, British Columbia ».
Canadian Journal of Earth Sciences, vol. 56, nº 5.
pp. 483-492.
Castaneda-Gonzalez, Mariana, Poulin, Annie, Romero-Lopez, Rabindranarth, Arsenault, Richard, Brissette, François et Turcotte, Richard.
2019.
« Sensitivity of seasonal flood simulations to regional climate model spatial resolution ».
Climate Dynamics, vol. 53, nº 7-8.
pp. 4337-4354.
Cetin Karayumak, S., Bouix, S., Ning, L., James, A., Crow, T., Shenton, M., Kubicki, M. et Rathi, Y..
2019.
« Retrospective harmonization of multi-site diffusion MRI data acquired with different acquisition parameters ».
NeuroImage, vol. 184.
pp. 180-200.
Chaddad, Ahmad, Daniel, Paul, Desrosiers, Christian, Toews, Matthew et Abdulkarim, Bassam.
2019.
« Novel radiomic features based on joint intensity matrices for predicting glioblastoma patient survival time ».
IEEE Journal of Biomedical and Health Informatics, vol. 23, nº 2.
pp. 795-804.
Chaddad, Ahmad, Daniel, Paul, Sabri, Siham, Desrosiers, Christian et Abdulkarim, Bassam.
2019.
« Integration of radiomic and multi-omic analyses predicts survival of newly diagnosed IDH1 wild-type glioblastoma ».
Cancers, vol. 11, nº 8.
Chaddad, Ahmad, Desrosiers, Christian, Abdulkarim, Bassam et Niazi, Tamim.
2019.
« Predicting the gene status and survival outcome of lower grade glioma patients with multimodal MRI features ».
IEEE Access, vol. 7.
pp. 75976-75984.
Chaddad, Ahmad, Toews, Matthew, Desrosiers, Christian et Niazi, Tamim.
2019.
« Deep radiomic analysis based on modeling information flow in convolutional neural networks ».
IEEE Access, vol. 7.
pp. 97242-97252.
Chadha, K., Shahriari, Davood, Aranas, C. Jr., Lapierre-Boire, Louis-Philippe et Jahazi, Mohammad.
2019.
« On the role of chromium in dynamic transformation of austenite ».
Metals and Materials International, vol. 25, nº 3.
pp. 559-569.
Chakraborty, Tulika, Chauhan, Satyaveer S. et Ouhimmou, Mustapha.
2019.
« Cost-sharing mechanism for product quality improvement in a supply chain under competition ».
International Journal of Production Economics, vol. 208.
pp. 566-587.
Charles, Alexandra, Maref, Wahid et Ouellet-Plamondon, Claudiane M..
2019.
« Case study of the upgrade of an existing office building for low energy consumption and low carbon emissions ».
Energy and Buildings, vol. 183.
pp. 151-160.
Chartofylaka, Lamprini, Stockless, Alain, Fraser, Marc, Psyché, Valéry et Forissier, Thomas.
2019.
« Partage d'informations contextuelles via l'apprentissage à distance asynchrone : Aperçus d'un projet de recherche contextuel dans les écoles primaires ».
Médiations et Médiatisations, vol. 2.
pp. 117-130.
Cheaitou, Ali, Gardoni, Mickael et Hamdan, Sadeque.
2019.
« A decision-making framework for environmentally sustainable product design ».
Concurrent Engineering Research and Applications, vol. 27, nº 4.
pp. 295-304.
Cheaitou, Ali, Larbi, Rim et Al Housani, Bashayer.
2019.
« Decision making framework for tender evaluation and contractor selection in public organizations with risk considerations ».
Socio-Economic Planning Sciences, vol. 68.
Chen, Jie, Arsenault, Richard, Brissette, François P., Côté, Pascal et Su, Tianhua.
2019.
« Coupling annual, monthly and daily weather generators to simulate multisite and multivariate climate variables with low‑frequency variability for hydrological modelling ».
Climate Dynamics, vol. 53, nº 7-8.
pp. 3841-3860.
Chen, Jie et Brissette, François P..
2019.
« Reliability of climate model multi-member ensembles in estimating internal precipitation and temperature variability at the multi-decadal scale ».
International Journal of Climatology, vol. 39, nº 2.
pp. 843-856.
Chen, Jie, Brissette, François P., Zhang, Xunchang J., Chen, Hua, Guo, Shenglian et Zhao, Yan.
2019.
« Bias correcting climate model multi-member ensembles to assess climate change impacts on hydrology ».
Climatic Change, vol. 153, nº 3.
pp. 361-377.
Chen, Zhangsen, Zhang, Gaixia, Prakash, Jai, Zheng, Yi et Sun, Shuhui.
2019.
« Rational design of novel catalysts with atomic layer deposition for the reduction of carbon dioxide ».
Advanced Energy Materials, vol. 9, nº 37.
Cheng, Jing Dong, Sun, Qiu Le, Zhang, Jian Xin, Desrosiers, Christian, Liu, Bin, Lu, Jian et Zhang, Qiang.
2019.
« Deep high-order supervised hashing ».
Optik, vol. 180.
pp. 847-857.
Cherifi, Ahmed, M'Bassègue, Patrick, Gardoni, Mickaël, Houssin, Rémy et Renaud, Jean.
2019.
« Eco-innovation and knowledge management: issues and organizational challenges to small and medium enterprises ».
Artificial Intelligence for Engineering Design, Analysis and Manufacturing, vol. 33, nº 2.
pp. 129-137.
Chinh, Vu Duc, Speranza, Giorgio, Migliaresi, Claudio, Nguyen, Van Chuc, Vu, Minh Tan et Nguyen-Tri, Phuong.
2019.
« Synthesis of gold nanoparticles decorated with multiwalled carbon nanotubes (Au-MWCNTs) via cysteaminium chloride functionalization ».
Scientific Reports, vol. 9.
Chioukh, Lydia, Djerafi, Tarek, Deslandes, Dominic et Wu, Ke.
2019.
« Concurrent cardiopulmonary detection using 12/24 GHz harmonic multiport interferometer radar architecture ».
IET Microwaves, Antennas and Propagation, vol. 13, nº 13.
pp. 2396-2404.
Chouak, Mohamed, Dufresne, Louis et Seers, Patrice.
2019.
« Single orifice diesel injector flow characterization and the impact of needle lift using large eddy simulation and proper orthogonal decomposition ».
Journal of Fluids Engineering, vol. 141, nº 5.
Clément, Julien, Blakeney, William, Hagemeister, Nicola, Desmeules, François, Mezghani, Neila, Lowry, Véronique et Vendittoli, Pascal-André.
2019.
« Hip-Knee-Ankle (HKA) angle modification during gait in healthy subjects ».
Gait and Posture, vol. 72.
pp. 62-68.
Communier, D., Botez, R. M. et Wong, T..
2019.
« Experimental validation of a new morphing trailing edge system using Price – Païdoussis wind tunnel tests ».
Chinese Journal of Aeronautics, vol. 32, nº 6.
pp. 1353-1366.
Communier, David, Le Besnerais, Franck, Botez, Ruxandra Mihaela et Wong, Tony.
2019.
« Design, manufacturing, and testing of a new concept for a morphing leading edge using a subsonic blow down wind tunnel ».
Biomimetics, vol. 4, nº 4.
Corbo, Rosario et Glaus, Mathias.
2019.
« Design of material transportation systems for sustainability ».
Transportation Research Part D: Transport and Environment, vol. 75.
pp. 13-22.
Cordier, F., Tassi, P., Claude, N., Crosato, A., Rodrigues, S. et Pham Van Bang, D..
2019.
« Numerical study of alternate bars in alluvial channels with nonuniform sediment ».
Water Resources Research, vol. 55, nº 4.
pp. 2976-3003.
Côté, Pascal et Arsenault, Richard.
2019.
« Efficient implementation of sampling stochastic dynamic programming algorithm for multireservoir management in the hydropower sector ».
Journal of Water Resources Planning and Management, vol. 145, nº 4.
Cruz, Rafael M. O., Oliveira, Dayvid V. R., Cavalcanti, George D. C. et Sabourin, Robert.
2019.
« FIRE-DES++: Enhanced online pruning of base classifiers for dynamic ensemble selection ».
Pattern Recognition, vol. 85.
pp. 149-160.
Cruz, Rafael M. O., Souza, Mariana A., Sabourin, Robert et Cavalcanti, George D. C..
2019.
« Dynamic ensemble selection and data preprocessing for multi-class imbalance learning ».
International Journal of Pattern Recognition and Artificial Intelligence, vol. 33, nº 11.
da Silva, Tassia Farssura Lima, Vieira, Darli Rodrigues, Melhado, Silvio Burratino et Carvalho, Marly Monteiro de.
2019.
« Risk and uncertainty in engineering projects: A survey of professionals ».
Journal of Modern Project Management, vol. 7, nº 1.
pp. 200-213.
Dagdougui, Hanane, Bagheri, Fatemeh, Le, Hieu et Dessaint, Louis.
2019.
« Neural network model for short-term and very-short-term load forecasting in district buildings ».
Energy and Buildings, vol. 203.
Dagdougui, Hanane, Ouammi, Ahmed et Dessaint, Louis A..
2019.
« Peak load reduction in a smart building integrating microgrid and V2B-Based demand response scheme ».
IEEE Systems Journal, vol. 13, nº 3.
pp. 3274-3282.
Dahman, Ghassan, Couillard, Denis, Grandmaison, Marie-Eve, Poitau, Gwenael et Gagnon, Francois.
2019.
« Improved 2-ray model for overwater propagation channels: modeling the instantaneous variations in the received signal strength ».
IEEE Wireless Communications Letters, vol. 8, nº 3.
pp. 865-868.
Dancila, Bogdan Dumitru, Beulze, Benoit et Botez, Ruxandra Mihaela.
2019.
« Flight phase and altitude-dependent geometrical vertical flight plan optimization minimizing the total number of vertical plan segments ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 233, nº 13.
pp. 4825-4838.
Dancila, R. et Botez, R..
2019.
« Vertical flight profile optimization for a cruise segment with RTA constraints ».
Aeronautical Journal, vol. 123, nº 1265.
pp. 970-992.
Daoust, Marc-Kevin.
2019.
« A puzzle about knowledge, blame, and coherence ».
Acta Analytica, vol. 34, nº 4.
pp. 493-503.
Daoust, Marc-Kevin.
2019.
« Epistemic Akrasia and epistemic reasons ».
Episteme, vol. 16, nº 3.
pp. 282-302.
Daoust, Marc-Kevin.
2019.
« One standard to rule them all? ».
Ratio, vol. 32, nº 1.
pp. 12-21.
Darvishi, Mostafa, Audet, Yves, Blaquière, Yves, Thibeault, Claude et Pichette, Simon.
2019.
« On the susceptibility of SRAM-based FPGA routing network to delay changes induced by ionizing radiation ».
IEEE Transactions on Nuclear Science, vol. 66, nº 3.
pp. 643-654.
Darwish, Ahmed, Di Labbio, Giuseppe, Saleh, Wael, Smadi, Othman et Kadem, Lyes.
2019.
« Experimental investigation of the flow downstream of a dysfunctional bileaflet mechanical aortic valve ».
Artificial Organs, vol. 43, nº 10.
E249-E263.
Dbouk, Toufic, Mourad, Azzam, Otrok, Hadi, Tout, Hanine et Talhi, Chamseddine.
2019.
« A novel ad-hoc mobile edge cloud offering security services through intelligent resource-aware offloading ».
IEEE Transactions on Network and Service Management, vol. 16, nº 4.
pp. 1665-1680.
de Castilla, Hector, Bélanger, Pierre et Zednik, Ricardo J..
2019.
« Generalized dynamic analytical model of piezoelectric materials for characterization using electrical impedance spectroscopy ».
Materials, vol. 12, nº 16.
de la Sablonnière, Roxane, Lina, Jean-Marc et Cárdenas, Diana.
2019.
« Rethinking current models in social psychology: A Bayesian framework to understand dramatic social change ».
British Journal of Social Psychology, vol. 58, nº 1.
pp. 175-195.
de Souza, Felipe Rodrigo, Miers, Charles Christian, Fiorese, Adriano, Dias de Assuncao, Marcos et Koslovski, Guilherme Piegas.
2019.
« QVIA-SDN: Towards QoS-Aware virtual infrastructure allocation on SDN-based Clouds ».
Journal of Grid Computing, vol. 17, nº 3.
pp. 447-472.
de Zambotti, Massimiliano, Smith, Ellen, Goldstone, Aimee, Forouzanfar, Mohamad, Claudatos, Stephanie, Gil, Maureen, Alschuler, Vanessa, Lim, Yun Qi, Rosas, Leonardo, Prouty, Devin, Kardos, Lena, Colrain, Ian et Baker, Fiona.
2019.
« 0137 The falling asleep process in adolescents ».
[Résumé d'une communication à une conférence]. Sleep, vol. 42, nº Suppl. 1.
A56.
Dehghan, Ehsan, Amiri, Maghsoud, Shafiei Nikabadi, Mohsen et Jabbarzadeh, Armin.
2019.
« Novel robust fuzzy programming for closed-loop supply chain network design under hybrid uncertainty ».
Journal of Intelligent and Fuzzy Systems, vol. 37, nº 5.
pp. 6457-6470.
del Re, E. C., Bouix, S., Fitzsimmons, J., Blokland, G. A. M., Mesholam-Gately, R., Wojcik, J., Kikinis, Z., Kubicki, M., Petryshen, T., Pasternak, O., Shenton, M. E. et Niznikiewicz, M..
2019.
« Diffusion abnormalities in the corpus callosum in first episode schizophrenia: Associated with enlarged lateral ventricles and symptomatology ».
Psychiatry Research, vol. 277.
pp. 45-51.
Delbergue, Dorian, Texier, Damien, Lévesque, Martin et Bocher, Philippe.
2019.
« Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin2ψ and cosα methods ».
Journal of Applied Crystallography, vol. 52, nº 4.
pp. 828-843.
Delhaye, Romain, Noumeir, Rita, Kaddoum, Georges et Jouvet, Philippe.
2019.
« Compression of patient's video for transmission over low bandwidth network ».
IEEE Access, vol. 7.
pp. 24029-24040.
Demers, V.
2019.
« Low-pressure powder injection moulding review: enabling cost effective low and high volume PIM production ».
PIM International, vol. 13, nº 2.
pp. 53-63.
Desjardins, Martine, Lina, Jean Marc, Gagnon, Jean-François et Jolicoeur, Pierre.
2019.
« Retinotopic mapping of attention field in the human brain ».
[Résumé d'une communication à une conférence]. Psychophysiology, vol. 56, nº suppl. 1.
S97.
Deslauriers-Gauthier, Samuel, Lina, Jean-Marc, Butler, Russell, Whittingstall, Kevin, Gilbert, Guillaume, Bernier, Pierre-Michel, Deriche, Rachid et Descoteaux, Maxime.
2019.
« White matter information flow mapping from diffusion MRI and EEG ».
NeuroImage, vol. 201.
Di Labbio, Giuseppe et Kadem, Lyes.
2019.
« Further classification of the cardiac vortex: On the scaling of core vorticity with heart rate ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 64, nº 13.
Di Labbio, Giuseppe et Kadem, Lyes.
2019.
« Reduced-order modeling of left ventricular flow subject to aortic valve regurgitation ».
Physics of Fluids, vol. 31, nº 3.
Di Labbio, Giuseppe et Kadem, Lyes.
2019.
« Response to letter to the editor: ‘Left ventricular flow in the presence of aortic regurgitation’ ».
Journal of Biomechanics, vol. 87.
pp. 212-214.
Diabat, Ali, Jabbarzadeh, Armin et Khosrojerdi, Amir.
2019.
« A perishable product supply chain network design problem with reliability and disruption considerations ».
International Journal of Production Economics, vol. 212.
pp. 125-138.
Diop, Issa, Nadeau, Sylvie et Emami-Mehrgani, Behnam.
2019.
« A mathematical model: A flexible manufacturing system, prone to error, making two products each with stochastic demand schedules ».
[Article scientifique]. American Journal of Industrial and Business Management, vol. 9, nº 1.
pp. 139-168.
Dolz, Jose, Gopinath, Karthik, Yuan, Jing, Lombaert, Herve, Desrosiers, Christian et Ben Ayed, Ismail.
2019.
« HyperDense-Net: A hyper-densely connected CNN for multi-modal image segmentation ».
IEEE Transactions on Medical Imaging, vol. 38, nº 5.
pp. 1116-1126.
Doutres, Olivier, Sgard, Franck, Terroir, Jonathan, Perrin, Nellie, Jolly, Caroline, Gauvin, Chantal et Negrini, Alessia.
2019.
« A critical review of the literature on comfort of hearing protection devices: definition of comfort and identification of its main attributes for earplug types ».
International Journal of Audiology, vol. 58, nº 12.
pp. 824-833.
Douzi, Wafa, Dugué, Benoit, Vinches, Ludwig, Al Sayed, Chady, Hallé, Stéphane, Bosquet, Laurent et Dupuy, Olivier.
2019.
« Cooling during exercise enhances performances, but the cooled body areas matter: a systematic review with meta-analyses ».
Scandinavian Journal of Medicine and Science in Sports, vol. 29, nº 11.
pp. 1660-1676.
Du, Lei, Lou, Shuaifeng, Chen, Guangyu, Zhang, Gaixia, Kong, Fanpeng, Qian, Zhengyi, Du, Chunyu, Gao, Yunzhi, Sun, Shuhui et Yin, Geping.
2019.
« Direct dimethyl ether fuel cells with low platinum-group-metal loading at anode: Investigations of operating temperatures and anode Pt/Ru ratios ».
Journal of Power Sources, vol. 433.
Dubuisson, Félix, Rezkallah, Miloud, Chandra, Ambrish, Saad, Maarouf, Tremblay, Marco et Ibrahim, Hussein.
2019.
« Control of hybrid wind-diesel standalone microgrid for water treatment system application ».
IEEE Transactions on Industry Applications, vol. 55, nº 6.
pp. 6499-6507.
Duclos, N. C., Aguiar, L. T., Aissaoui, R., Nadeau, S. et Duclos, C..
2019.
« Pertinencia e implicaciones de la actimetría en rehabilitación ».
EMC - Kinesiterapia - Medicina Física, vol. 40, nº 4.
Duclos, N. C., Aguiar, L. T., Aissaoui, R., Nadeau, S. et Duclos, C..
2019.
« Rilevanza e implicazioni dell’actimetria in riabilitazione ».
EMC - Medicina Riabilitativa, vol. 26, nº 4.
Duclos, Noémie C., Aissaoui, Rachid, Parent, Gérald, Duclos, Cyril et Nadeau, Sylvie.
2019.
« L’asymétrie temporelle à la marche évaluée en laboratoire et dans un milieu écologique ne diffère pas chez les personnes post-AVC ».
[Résumé d'une communication à une conférence]. Neurophysiologie Clinique, vol. 49, nº 6.
pp. 425-426.
Duclos, Noémie, Aguiar, Larissa T., Aissaoui, Rachid, Faria, Christina D.C.M., Nadeau, Sylvie et Duclos, Cyril.
2019.
« Activity monitor placed at the nonparetic ankle is accurate in measuring step counts during community walking in poststroke individuals: A validation study ».
PM & R, vol. 11, nº 9.
pp. 963-971.
Dumas, Raphael, Barré, Arnaud, Moissenet, Florent et Aissaoui, Rachid.
2019.
« Can a reduction approach predict reliable joint contact and musculo-tendon forces? ».
Journal of Biomechanics, vol. 95.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Belanger, Pierre.
2019.
« Design and optimisation of a phased array transducer for ultrasonic inspection of large forged steel ingots ».
NDT and E International, vol. 103.
pp. 119-129.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Belanger, Pierre.
2019.
« Influence of local mechanical parameters on ultrasonic wave propagation in large forged steel ingots ».
Journal of Nondestructive Evaluation, vol. 38, nº 3.
Ebrahimi, G. R., Momeni, A., Ezatpour, H. R., Jahazi, M. et Bocher, P..
2019.
« Dynamic recrystallization in Mone1400 Ni-Cu alloy: mechanism and role of twinning ».
Materials Science and Engineering : A, vol. 744.
pp. 376-385.
Eesaee, Mostafa, David, Eric et Demarquette, Nicole R..
2019.
« Effect of blending and nanoclay on dielectric properties of polypropylene ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 26, nº 5.
pp. 1487-1494.
Eesaee, Mostafa, David, Eric, Demarquette, Nicole R., Fabiani, Davide et Palmieri, Fabrizio.
2019.
« Charge transport and accumulation in clay-containing LDPE nanocomposites ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 26, nº 1.
pp. 292-299.
El Koutbi, Salma, Idri, Ali et Abran, Alain.
2019.
« Empirical evaluation of an entropy-based approach to estimation variation of software development effort ».
Journal of Software: Evolution and Process, vol. 31, nº 3.
El Wazziki, Mohamed et Ngo, Anh Dung.
2019.
« Design for manufacture: Cost-estimating model for randomly oriented strand advanced composite aerospace parts ».
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 233, nº 6.
pp. 1241-1251.
Elbeggo, Dania, Hussien, Mahmoud N., Ethier, Yannic et Karray, Mourad.
2019.
« Robustness of the P-RAT in the shear-wave velocity measurement of soft clays ».
Journal of Geotechnical and Geoenvironmental Engineering, vol. 145, nº 5.
El-Ghaoui, Khalid, Chatelain, Jean-François et Ouellet-Plamondon, Claudiane.
2019.
« Effect of graphene on machinability of glass fiber reinforced polymer (GFRP) ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 3.
El-Ghaoui, Khalid, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane et Mathieu, Ronan.
2019.
« Effects of nano organoclay and wax on the machining temperature and mechanical properties of Carbon Fiber Reinforced Plastics (CFRP) ».
Journal of Composites Science, vol. 3, nº 3.
Elmidaoui, Sara, Cheikhi, Laila, Idri, Ali et Abran, Alain.
2019.
« Empirical studies on software product maintainability prediction: A systematic mapping and review ».
E-Informatica Software Engineering Journal, vol. 13, nº 1.
pp. 141-202.
Elsayed, Mohannad Y. et Nabki, Frederic.
2019.
« 870 000 Q-factor capacitive Lamé mode resonator with gap closing electrodes enabling 4.4 kΩ equivalent resistance at 50 V ».
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 66, nº 4.
pp. 717-726.
Elzayat, Ahmed et Kouki, Ammar.
2019.
« Miniaturized planar filters exhibiting flexible placement of three transmission zeros suitable for duplexer design ».
International Journal of RF and Microwave Computer-Aided Engineering, vol. 29, nº 1.
Elzein, Hassana, Dandres, Thomas, Levasseur, Annie et Samson, Rejean.
2019.
« How can an optimized life cycle assessment method help evaluate the use phase of energy storage systems? ».
Journal of Cleaner Production, vol. 209.
pp. 1624-1636.
Erleben, Kenny et Andrews, Sheldon.
2019.
« Solving inverse kinematics using exact Hessian matrices ».
Computers and Graphics, vol. 78.
pp. 1-11.
Ernez, S. et Morency, F..
2019.
« Eulerian–Lagrangian CFD model for prediction of heat transfer between aircraft deicing liquid sprays and a surface ».
International Journal of Numerical Methods for Heat & Fluid Flow, vol. 29, nº 7.
pp. 2450-2475.
Escribano, Francisco J., Wagemakers, Alexandre, Kaddoum, Georges et Evangelista, Joao V. C..
2019.
« Design and performance analysis of an index time frequency modulation scheme for optical communications ».
IEEE Journal on Selected Topics in Signal Processing, vol. 13, nº 6.
pp. 1403-1416.
Eshteiwi, Khaled, Kaddoum, Georges, Ben Fredj, Kais, Soujeri, Ebrahim et Gagnon, François.
2019.
« Performance analysis of full-duplex vehicle relay-based selection in dense multi-lane highways ».
IEEE Access, vol. 7.
pp. 61581-61595.
Evangelista, Joao V. C., Sattar, Zeeshan, Kaddoum, Georges et Chaaban, Anas.
2019.
« Fairness and Sum-Rate Maximization via Joint Subcarrier and Power Allocation in Uplink SCMA Transmission ».
IEEE Transactions on Wireless Communications, vol. 18, nº 12.
pp. 5855-5867.
Fadhel, Yosra Ben, Ktata, Sana, Sedraoui, Khaled, Rahmani, Salem et Al-Haddad, Kamal.
2019.
« A modified wireless power transfer system for medical implants ».
Energies, vol. 12, nº 10.
Fahad, Adil, Almalawi, Abdulmohsen, Tari, Zahir, Alharthi, Kurayman, Al Qahtani, Fawaz S. et Cheriet, Mohamed.
2019.
« Semtra: a semi-supervised approach to traffic flow labeling with minimal human effort ».
Pattern Recognition, vol. 91.
pp. 1-12.
Fall, A., Monajati, H., Khodabandeh, A., Fesharaki, M. H., Champliaud, H. et Jahazi, M..
2019.
« Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ».
Materials Science and Engineering: A, vol. 749.
pp. 166-175.
Fang, Xiaoxing, Benzerrouk, Hamza et Landry, René Jr.
2019.
« Energy management and guidance for gyroplane autonomous unpowered landing based on onboard trajectory generation ».
[Article de conférence]. IFAC-PapersOnLine, vol. 52, nº 12.
pp. 250-255.
Fannou, Jean-Louis Comlan, Lamarche, Louis, Semassou, Guy Clarence, Stanislaw, Kajl et Vianou, Antoine.
2019.
« Cooling mode experimental analysis of a direct expansion geothermal heat pump with a control depending on the discharge pressure ».
Applied Thermal Engineering, vol. 160.
Fareh, Raouf, Saad, Mohamad R., Saad, Maarouf, Brahmi, Abdelkrim et Bettayeb, Maamar.
2019.
« Trajectory tracking and stability analysis for mobile manipulators based on decentralized control ».
Robotica, vol. 37, nº 10.
pp. 1732-1749.
Farzaneh, Aida, Monfet, Danielle et Forgues, Daniel.
2019.
« Review of using Building Information Modeling for building energy modeling during the design process ».
Journal of Building Engineering, vol. 23.
pp. 127-135.
Feghoul, Aiman, Aissaoui, Rachid et Chenier, Felix.
2019.
« Prédiction des forces et du moment de réaction sur la main courante lors de la propulsion manuelle en fauteuil roulant en utilisant des capteurs inertiels ».
[Résumé d'une communication à une conférence]. Neurophysiologie Clinique, vol. 49, nº 6.
pp. 415-416.
Férand, Mélissa, Livebardon, Thomas, Moreau, Stéphane et Sanjosé, Marlène.
2019.
« Numerical prediction of far-field combustion noise from aeronautical engines ».
Acoustics, vol. 1, nº 1.
pp. 174-198.
Ferjani, Amel, Carter, Alan, Vaillancourt, Michel, Dardeau, Adrien et Gandi, Apparao.
2019.
« Effect of cement content on cracking resistance of full-depth reclamation materials using the semicircular bending test ».
Advances in Civil Engineering Materials, vol. 8, nº 1.
pp. 411-422.
Forouzanfar, Mohamad, Baker, Fiona C., Colrain, Ian M., Goldstone, Aimée et de Zambotti, Massimiliano.
2019.
« Automatic analysis of pre-ejection period during sleep using impedance cardiogram ».
Psychophysiology, vol. 56, nº 7.
Fort, Valentin, Bouzid, Abdel-Hakim et Gratton, Michel.
2019.
« Analytical modeling of self-loosening of bolted joints subjected to transverse loading ».
Journal of Pressure Vessel Technology, vol. 141, nº 3.
Francis, Adel.
2019.
« Chronographical spatiotemporal scheduling optimization for building projects ».
Frontiers in Built Environment, vol. 5.
Francis, Adel, Miresco, Edmond et Le Meur, Erwan.
2019.
« Spatiotemporal chronographical modeling of procurement and material flow for building projects ».
Advances in Computational Design, vol. 4, nº 2.
pp. 119-139.
Fraser, Marc et Kozanitis, Anastassis.
2019.
« Pour un climat de classe non discriminatoire : vers des pratiques enseignantes inclusives des genres et de la diversité sexuelle au collégial ».
Pédagogie collégiale, vol. 32, nº 4.
pp. 34-40.
Fu, Xiaofan, Javadi, Alireza, Al-Haddad, Kamal, Dessaint, Louis-A., Li, Wei et Ooi, Boon-Teck.
2019.
« HIL-RT implementation of UHVDC transmission system based on series-connected VSC modules ».
IEEE Access, vol. 7.
pp. 84602-84612.
Fu, Yanqing, Wei, Qiliang, Zhang, Gaixia, Zhong, Yu, Moghimian, Nima, Tong, Xin et Sun, Shuhui.
2019.
« LiFePO 4 -graphene composites as high-performance cathodes for lithium-ion batteries: The impact of size and morphology of graphene ».
Materials, vol. 16, nº 6.
Fukuda, Tomohiro, Yokoi, Kazuki, Yabuki, Nobuyoshi et Motamedi, Ali.
2019.
« An indoor thermal environment design system for renovation using augmented reality ».
Journal of Computational Design and Engineering, vol. 6, nº 2.
pp. 179-188.
Fung, Carol, Francois, Jerome, Cordeiro, Weverton et Zhani, Mohamed Faten.
2019.
« Advanced security management ».
International Journal of Network Management, vol. 29, nº 3.
Gagnon, Jonathan, Guzman, Julian E., Vervondel, Valentin, Dagenais, Francois, Mould, David et Paquette, Eric.
2019.
« Distribution update of deformable patches for texture synthesis on the free surface of fluids ».
Computer Graphics Forum, vol. 38, nº 7.
pp. 491-500.
Galdran, Adrian, Chakor, Hadi, Abdulaziz, Abdulaziz, Kobbi, Ryad, Christodoulidis, Argyrios, Chelbi, Jihed, Racine, Marc-André et Ben Ayed, Ismail.
2019.
« Automatic classification and triage of diabetic retinopathy from retinal images based on a convolutional neural networks (CNN) method ».
[Résumé d'une communication à une conférence]. Acta Ophthalmologica, vol. 97.
p. 2.
Gandi, Apparao, Cardenas, Alberto, Sow, Djibril, Carter, Alain et Perraton, Daniel.
2019.
« Study of the impact of the compaction and curing temperature on the behavior of cold bituminous recycled materials ».
Journal of Traffic and Transportation Engineering (English Edition), vol. 6, nº 4.
pp. 349-358.
Garg, Sahil, Kaur, Kuljeet, Ahmed, Syed Hassan, Bradai, Abbas, Kaddoum, Georges et Atiquzzaman, Mohammed.
2019.
« MobQoS: Mobility-Aware and QoS-Driven SDN Framework for Autonomous Vehicles ».
IEEE Wireless Communications, vol. 26, nº 4.
pp. 12-20.
Garg, Sahil, Kaur, Kuljeet, Kaddoum, Georges, Ahmed, Syed Hassan et Jayakody, Dushantha Nalin K..
2019.
« SDN-based secure and privacy-preserving scheme for vehicular networks: a 5G perspective ».
IEEE Transactions on Vehicular Technology, vol. 68, nº 9.
pp. 8421-8434.
Garg, Sahil, Kaur, Kuljeet, Kumar, Neeraj, Kaddoum, Georges, Zomaya, Albert Y. et Ranjan, Rajiv.
2019.
« A hybrid deep learning based model for anomaly detection in cloud datacenter networks ».
IEEE Transactions on Network and Service Management, vol. 16, nº 3.
pp. 924-935.
Garg, Sahil, Kaur, Kuljeet, Kumar, Neeraj et Rodrigues, Joel J. P. C..
2019.
« Hybrid deep-learning-based anomaly detection scheme for suspicious flow detection in SDN: A social multimedia perspective ».
IEEE Transactions on Multimedia, vol. 21, nº 3.
pp. 566-578.
Garg, Sahil, Singh, Amritpal, Kaur, Kuljeet, Aujla, Gagangeet Singh, Batra, Shalini, Kumar, Neeraj et Obaidat, M. S..
2019.
« Edge computing-based security framework for big data analytics in VANETs ».
IEEE Network, vol. 33, nº 2.
pp. 72-81.
Gauthier, Mercedes, Gauvin, Mathieu, Lina, Jean-Marc et Lachapelle, Pierre.
2019.
« The effects of bandpass filtering on the oscillatory potentials of the electroretinogram ».
Documenta Ophthalmologica, vol. 138, nº 3.
pp. 247-254.
Gendron, Mathieu, Hazel, Bruce, Boudreault, Eric, Champliaud, Henri et Pham, Xuan-Tan.
2019.
« Coupled thermo-electromagnetic model of a new robotic high-frequency local induction heat treatment system for large steel components ».
Applied Thermal Engineering, vol. 150.
pp. 372-385.
Geng, Hua, Zheng, Zedong, Zou, Tianming, Chu, Bing et Chandra, Ambrish.
2019.
« Fast repetitive control with harmonic correction loops for shunt active power filter applied in weak grid ».
IEEE Transactions on Industry Applications, vol. 55, nº 3.
pp. 3198-3206.
Genoyer, Julie, Demarquette, Nicole R. et Soulestin, Jérémie.
2019.
« Effect of clay particles size and location on coalescence in PMMA/PS blends ».
Journal of Rheology, vol. 63, nº 6.
pp. 883-893.
Georgiev, Bogdan et Roy-Fortin, Guillaume.
2019.
« Polynomial upper bound on interior Steklov nodal sets ».
Journal of Spectral Theory, vol. 9, nº 3.
pp. 897-919.
Getu, Tilahun M., Ajib, Wessam, Landry, René Jr. et Kaddoum, Georges.
2019.
« Toward overcoming a hidden terminal problem arising in MIMO cognitive radio networks: a tensor-based spectrum sensing algorithm ».
IEEE Transactions on Vehicular Technology, vol. 68, nº 10.
pp. 9833-9847.
Ghazal, Sam, Sauthier, Michael, Brossier, David, Bouachir, Wassim, Jouvet, Philippe A. et Noumeir, Rita.
2019.
« Using machine learning models to predict oxygen saturation following ventilator support adjustment in critically ill children: A single center pilot study ».
PLoS ONE, vol. 14, nº 2.
Ghazi, Georges et Botez, Ruxandra Mihaela.
2019.
« Identification and validation of an engine performance database model for the flight management system ».
Journal of Aerospace Information Systems, vol. 16, nº 8.
pp. 307-326.
Ghommam, Jawhar, Iftekhar, Lamia et Saad, Maarouf.
2019.
« Adaptive finite time path-following control of underactuated surface vehicle with collision avoidance ».
Journal of Dynamic Systems, Measurement and Control, vol. 141, nº 12.
Girard, Simon R., Legault, Vincent, Bois, Guy et Boland, Jean-François.
2019.
« Avionics graphics hardware performance prediction with machine learning ».
Scientific Programming, vol. 2019.
Glibin, Vassili P., Cherif, Mohamed, Vidal, François, Dodelet, Jean-Pol, Zhang, Gaixia et Sun, Shuhui.
2019.
« Non-PGM electrocatalysts for PEM fuel cells: Thermodynamic stability and DFT evaluation of fluorinated FeN4-based ORR catalysts ».
Journal of the Electrochemical Society, vol. 166, nº 7.
F3277-F3286.
Gopinath, Karthik, Desrosiers, Christian et Lombaert, Herve.
2019.
« Graph convolutions on spectral embeddings for cortical surface parcellation ».
Medical Image Analysis, vol. 54.
pp. 297-305.
Gratuze, Mathieu, Alameh, Abdul Hafiz et Nabki, Frederic.
2019.
« Design of the squared daisy: a multi-mode energy harvester, with reduced variability and a non-linear frequency response ».
Sensors, vol. 19, nº 15.
Grichi, Yosra, Beauregard, Yvan et Dao, Thien-My.
2019.
« An approach to obsolescence forecasting based on Hidden Markov Model and Compound Poisson Process ».
International Journal of Industrial Engineering and Operations Management (IJIEOM), vol. 1, nº 2.
pp. 111-124.
Grilli, Andrea, Graziani, Andrea, Carter, Alan, Sangiorgi, Cesare, Specht, Luciano Pivoto et Callai, Sergio Copetti.
2019.
« Slurry surfacing: A review of definitions, descriptions and current practices ».
RILEM Technical Letters, vol. 4.
pp. 103-109.
Gudmarsson, Anders, Carret, Jean-Claude, Pouget, Simon, Nilsson, Richard, Ahmed, Abubeker, Di Benedetto, Hervé et Sauzéat, Cédric.
2019.
« Precision of modal analysis to characterise the complex modulus of asphalt concrete ».
Road Materials and Pavement Design, vol. 20, nº suppl. 1.
S217-S232.
Guérineau, Benjamin-Julia, Samir, Kousay, Richrath, Marvin, Paetzold, Kristin et Montero, Joaquin.
2019.
« Aspects of body metrics data management in the long term for the European fitness industry ».
[Article de conférence]. Proceedings of the Design Society: International Conference on Engineering Design, vol. 1, nº 1.
pp. 2051-2060.
Gueziri, Houssem-Eddine, Drouin, Simon, Yan, Charles X. B. et Collins, D. Louis.
2019.
« Toward real-time rigid registration of intra-operative ultrasound with preoperative CT images for lumbar spinal fusion surgery ».
International Journal of Computer Assisted Radiology and Surgery, vol. 14, nº 11.
pp. 1933-1943.
Guilbault, Raynald et Lalonde, Sébastien.
2019.
« A stochastic prediction of roughness evolution in dynamic contact modelling applied to gear mild wear and contact fatigue ».
Tribology International, vol. 140.
Guo, Xiaohang, Benavides-Guerrero, Jaime, Banerjee, Debika, Roy-Moisan, Francois et Cloutier, Sylvain G..
2019.
« Hybrid color-tunable polymer light-emitting diodes using electrospraying ».
ACS Omega, vol. 4, nº 21.
pp. 19287-19292.
Gupta, Anubha A., Soer, Michiel C. M., Taherzadeh-Sani, Mohammad, Cloutier, Sylvain G. et Izquierdo, Ricardo.
2019.
« Aerosol-jet printed transmission lines for microwave packaging applications ».
IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 9, nº 12.
pp. 2482-2489.
Haddaji, Nassim, Nguyen, Kim et Cheriet, Mohamed.
2019.
« TCO Planning Game for 5G Multitenant Virtualized Mobile BackHaul (V-MBH) Network ».
Journal of Lightwave Technology, vol. 37, nº 24.
pp. 6193-6206.
Hadidian Moghadam, Hossein et Kouki, Ammar B..
2019.
« New modified urban canyon models for satellite signal propagation prediction ».
IEEE Access, vol. 7.
pp. 25298-25307.
Hafemann, Luiz G., Sabourin, Robert et Oliveira, Luiz S..
2019.
« Characterizing and evaluating adversarial examples for offline handwritten signature verification ».
IEEE Transactions on Information Forensics and Security, vol. 14, nº 8.
pp. 2153-2166.
Haj Ibrahim, Marwa, Aidibe, Ali, Mahjoub, Mohamed Ali, Tahan, Antoine et Louhichi, Borhen.
2019.
« A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology ».
International Journal of Advanced Manufacturing Technology, vol. 103, nº 1-4.
pp. 409-422.
Han, Qi, St-Yves, Jonathan, Chen, Yuxuan, Ménard, Michaël et Shi, Wei.
2019.
« Polarization-insensitive silicon nitride arrayed waveguide grating ».
Optics Letters, vol. 44, nº 16.
pp. 3976-3979.
Hawila, Abed Al Waheed, Merabtine, Abdelatif, Troussier, Nadège et Bennacer, Rachid.
2019.
« Combined use of dynamic building simulation and metamodeling to optimize glass facades for thermal comfort ».
Building and Environment, vol. 157.
pp. 47-63.
Head, Marieke, Bernier, Pierre, Levasseur, Annie, Beauregard, Robert et Margni, Manuele.
2019.
« Forestry carbon budget models to improve biogenic carbon accounting in life cycle assessment ».
Journal of Cleaner Production, vol. 213.
pp. 289-299.
Heibati, Seyedmohammadreza, Maref, Wahid et Saber, Hamed H..
2019.
« Assessing the energy and indoor air quality performance for a three-story building using an integrated model, part one: the need for integration ».
Energies, vol. 12, nº 24.
Heidari, Razieh, Yazdanparast, Reza et Jabbarzadeh, Armin.
2019.
« Sustainable design of a municipal solid waste management system considering waste separators: A real-world application ».
Sustainable Cities and Society, vol. 47.
Helal, Emna, Kurusu, Rafael S., Moghimian, Nima, Gutierrez, Giovanna, David, Eric et Demarquette, Nicole R..
2019.
« Correlation between morphology, rheological behavior, and electrical behavior of conductive cocontinuous LLDPE/EVA blends containing commercial graphene nanoplatelets ».
Journal of Rheology, vol. 63, nº 6.
pp. 961-976.
Herceg, Marijan, Filipovic, Luka, Matic, Tomislav et Kaddoum, Georges.
2019.
« Inductance index modulation for human body communication systems ».
IEEE Wireless Communications Letters, vol. 8, nº 3.
pp. 937-940.
Hériveaux, Yoann, Nguyen, Vu-Hieu, Brailovski, Vladimir, Gorny, Cyril et Haiat, Guillaume.
2019.
« Reflection of an ultrasonic wave on the bone-implant interface: effect of the roughness parameters ».
Journal of the Acoustical Society of America, vol. 145, nº 6.
pp. 3370-3381.
Hertz, Alain, Montagné, Romain et Gagnon, François.
2019.
« A comparison of integer programming models for the partial directed weighted improper coloring problem ».
Discrete Applied Mathematics, vol. 261.
pp. 229-245.
Honarparast, Sara et Chaallal, Omar.
2019.
« Non-linear time history analysis of reinforced concrete coupled shear walls: comparison of old design, modern design and retrofitted with externally bonded CFRP composites ».
Engineering Structures, vol. 185.
pp. 353-365.
Honarparast, Sara, El-Saikaly, Georges et Chaallal, Omar.
2019.
« Externally bonded carbon fiber–reinforced polymer composites for seismic retrofit of reinforced concrete coupling beams designed according to old codes ».
Advances in Structural Engineering, vol. 22, nº 6.
pp. 1412-1425.
Hong, Tao, Liu, Cong et Kadoch, Michel.
2019.
« Machine learning based antenna design for physical layer security in ambient backscatter communications ».
Wireless Communications and Mobile Computing, vol. 2019.
Hosni, Mohamed, Idri, Ali et Abran, Alain.
2019.
« Evaluating filter fuzzy analogy homogenous ensembles for software development effort estimation ».
Journal of Software-Evolution and Process, vol. 31, nº 2.
Huang, Qian, Xie, Xianzhong, Tang, Hong, Hong, Tao, Kadoch, Michel, Nguyen, Kim Khoa et Cheriet, Mohamed.
2019.
« Machine-learning-based cognitive spectrum assignment for 5G URLLC applications ».
IEEE Network, vol. 33, nº 4.
pp. 30-35.
Huang, W., Causse, P., Brailovski, V., Hu, H. et Trochu, F..
2019.
« Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling ».
Composites Part A: Applied Science and Manufacturing, vol. 124.
Huang, Wei, Huang, Qun, Liu, Yin, Yang, Jie, Hu, Heng, Trochu, François et Causse, Philippe.
2019.
« A Fourier based reduced model for wrinkling analysis of circular membranes ».
Computer Methods in Applied Mechanics and Engineering, vol. 345.
pp. 1114-1137.
Huang, Wei, Li, Shun, Bouzidi, Soraya, Lei, Lei, Zhang, Zuotai, Xu, Ping, Cloutier, Sylvain G., Rosei, Federico et Nechache, Riad.
2019.
« Epitaxial patterned Bi2FeCrO6 nanoisland arrays with room temperature multiferroic properties ».
Nanoscale Advances, vol. 1, nº 6.
pp. 2139-2145.
Huot, Pierre-Luc, Poulin, A., Audet, C. et Alarie, S..
2019.
« A hybrid optimization approach for efficient calibration of computationally intensive hydrological models ».
Hydrological Sciences Journal, vol. 64, nº 10.
pp. 1204-1222.
Hussain, A., Sher, H. A., Murtaza, A. F. et Al-Haddad, K..
2019.
« Improved Restricted Control Set Model Predictive Control (iRCS-MPC) based maximum power point tracking of photovoltaic module ».
IEEE Access, vol. 7.
pp. 149422-149432.
Hussein, Mahmoud, Ghommam, Jawhar, Ghodbane, Azeddine, Saad, Maarouf et Nerguizian, Vahe.
2019.
« Distributed active fault tolerant control design against actuator faults for multiple mobile robots ».
Control Theory and Technology, vol. 17, nº 4.
pp. 367-381.
Ibrahim, Hussein, Issa, Mohamad, Lepage, Richard, Ilinca, Adrian et Perron, Jean.
2019.
« Supercharging of diesel engine with compressed air: Experimental investigation on greenhouse gases and performance for a hybrid wind-diesel system ».
Smart Grid and Renewable Energy, vol. 10, nº 9.
Ignatowicz, Kevin, Morency, François et Lopez, Pierre.
2019.
« Dynamic moment model for numerical simulation of a 6-DOF plate trajectory around an aircraft ».
Journal of Aerospace Engineering, vol. 32, nº 5.
Ikaouassen, Halima, Raddaoui, Abderraouf, Rezkallah, Miloud et Chandra, Ambrish.
2019.
« Real-time implementation of improved predictive model control for standalone power generation system based PV renewable energy ».
IET Generation, Transmission & Distribution, vol. 13, nº 7.
pp. 1068-1077.
Inaekyan, K., Kreitcberg, A., Turenne, S. et Brailovski, V..
2019.
« Microstructure and mechanical properties of laser powder bed-fused IN625 alloy ».
Materials Science and Engineering A, vol. 768.
Isapour, Aria et Kouki, Ammar.
2019.
« Vertical LTCC integrated rectangular waveguide and transitions for millimeter-wave applications ».
IEEE Transactions on Microwave Theory and Techniques, vol. 67, nº 3.
pp. 868-882.
Issa, Mohamad, Beaulac, Philippe, Ibrahim, Hussein et Ilinca, Adrian.
2019.
« Marinization of a two-stage mixed structured packing scrubber for sox abatement and Co2 capture ».
International Journal of Advanced Research, vol. 7, nº 4.
pp. 73-82.
Issa, Mohamad, Fiset, Jean, Ibrahim, Hussein et Ilinca, Adrian.
2019.
« Eco-friendly selection of diesel generator based on genset-synchro technology for off-grid remote area application in the North of Quebec ».
Energy and Power Engineering, vol. 11, nº 5.
Issa, Mohamad, Ibrahim, Hussein, Ilinca, Adrian et Hayyani, M. Yasser.
2019.
« A review and economic analysis of different emission reduction techniques for marine diesel engines ».
Open Journal of Marine Science, vol. 9, nº 3.
Issa, Mohamad, Ibrahim, Hussein, Lepage, Richard et Ilinca, Adrian.
2019.
« A review and comparison on recent optimization methodologies for diesel engines and diesel power generators ».
Journal of Power and Energy Engineering, vol. 7, nº 6.
Issa, Mohamad, Lepage, Richard, Ilinca, Adrian, Ait-Yahia, Karim, Ibrahim, Hussein et Ghandour, Mazen.
2019.
« Integrated a variable frequency drive for a diesel-generating set using the genset-synchro concept ».
International Journal of Engineering Research and Technology, vol. 8, nº 8.
pp. 232-239.
Jabbarzadeh, Armin, Fahimnia, Behnam et Rastegar, Saeed.
2019.
« Green and resilient design of electricity supply chain networks: A multiobjective robust optimization approach ».
IEEE Transactions on Engineering Management, vol. 66, nº 1.
pp. 52-72.
Jabbarzadeh, Armin, Haughton, Michael et Pourmehdi, Fahime.
2019.
« A robust optimization model for efficient and green supply chain planning with postponement strategy ».
International Journal of Production Economics, vol. 214.
pp. 266-283.
Jamali, Mohammadreza et Coulombe, Stéphane
Jameel, Furqan, Wyne, Shurjeel, Kaddoum, Georges et Duong, Trung Q..
2019.
« A comprehensive survey on cooperative relaying and jamming strategies for physical layer security ».
IEEE Communications Surveys and Tutorials, vol. 21, nº 3.
pp. 2734-2771.
Javadi, Alireza, Abarzadeh, Mostafa, Gregoire, Luc-André et Al-Haddad, Kamal.
2019.
« Real-time HIL implementation of a single-phase distribution level THSeAF based on D-NPC converter using proportional-resonant controller for power quality platform ».
IEEE Access, vol. 7.
pp. 110372-110386.
Javadi, Hamid, Jomaa, Walid, Songmene, Victor, Brochu, Myriam et Bocher, Philippe.
2019.
« Inconel 718 superalloy controlled surface integrity for fatigue applications produced by precision turning ».
International Journal of Precision Engineering and Manufacturing, vol. 20, nº 8.
pp. 1297-1310.
Javanbakht, Taraneh, Laurent, Sophie, Stanicki, Dimitri et David, Eric.
2019.
« Related physicochemical, rheological, and dielectric properties of nanocomposites of superparamagnetic iron oxide nanoparticles with polyethyleneglycol ».
Journal of Applied Polymer Science, vol. 137, nº 3.
Jbira, Ibtissem, Tahan, Antoine, Bonsaint, Serge, Mahjoub, Mohamed Ali et Louhichi, Borhen.
2019.
« Reproducibility experimentation among computer-aided inspection software from a single point cloud ».
Journal of Control Science and Engineering, vol. 2019.
Jobidon, Gabriel, Lemieux, Pierre et Beauregard, Robert.
2019.
« Comparison of Quebec’s Project Delivery Methods: Relational contract law and differences in contractual language ».
Laws, vol. 8, nº 2.
Kaba, Emmanuel Kossè et Assaf, Gabriel J..
2019.
« Roads funding priority index for Sub-Saharan Africa using principal components analysis ».
Case Studies on Transport Policy, vol. 7, nº 4.
pp. 732-748.
Kale, S. S., Bergeron-Brlek, M., Wu, Y., Kumar, M. G., Pham, M. V., Bortoli, J., Vesin, J., Kong, X. D., Franco Machado, J., Deyle, K., Gonschorek, P., Turcatti, G., Cendron, L., Angelini, A. et Heinis, C..
2019.
« Thiol-to-amine cyclization reaction enables screening of large libraries of macrocyclic compounds and the generation of sub-kilodalton ligands ».
Science Advances, vol. 5, nº 8.
Kali, Yassine, Ayala, Magno, Rodas, Jorge, Saad, Maarouf, Doval-Gandoy, Jesus, Gregor, Raul et Benjelloun, Khalid.
2019.
« Current control of a six-phase induction machine drive based on discrete-time sliding mode with time delay estimation ».
Energies, vol. 12, nº 1.
Kali, Yassine, Saad, Maarouf, Doval-Gandoy, Jesus, Rodas, Jorge et Benjelloun, Khalid.
2019.
« Discrete sliding mode control based on exponential reaching law and time delay estimation for an asymmetrical six-phase induction machine drive ».
IET Electric Power Applications, vol. 13, nº 11.
pp. 1660-1671.
Kamali, Kaveh et Bonev, Ilian A..
2019.
« Optimal experiment design for elasto-geometrical calibration of industrial robots ».
IEEE/ASME Transactions on Mechatronics, vol. 24, nº 6.
pp. 2733-2744.
Kammegne, M. J. Tchatchueng, Botez, R. M., Grigorie, L. T., Mamou, M. et Mébarki, Y..
2019.
« A new hybrid control methodology for a morphing aircraft wing-tip actuation mechanism ».
Aeronautical Journal, vol. 123, nº 1269.
pp. 1757-1787.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2019.
« Effect of thermal ratcheting on the mechanical properties of Teflon and fiber based gasket materials ».
Journal of Applied Polymer Science, vol. 136, nº 13.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2019.
« Influence of thermal ratcheting on the creep and mechanical properties of high-density polyethylene ».
Journal of Engineering Materials and Technology, vol. 141, nº 4.
Karimi, Elham, Ménard, Lucie et Laporte, Catherine.
2019.
« Fully-automated tongue detection in ultrasound images ».
Computers in Biology and Medicine, vol. 111.
Kaur, Kuljeet, Garg, Sahil, Kaddoum, Georges, Ahmed, Syed Hassan, Gagnon, François et Atiquzzaman, Mohammed.
2019.
« Demand-response management using a fleet of electric vehicles: an opportunistic-SDN-based edge-cloud framework for smart grids ».
IEEE Network, vol. 33, nº 5.
pp. 46-53.
Kaur, Kuljeet, Garg, Sahil, Kaddoum, Georges, Kumar, Neeraj et Gagnon, François.
2019.
« SDN-based internet of autonomous vehicles: An energy-efficient approach for controller placement ».
IEEE Wireless Communications, vol. 26, nº 6.
pp. 72-79.
Kaur, Kuljeet, Kumar, Neeraj et Singh, Mukesh.
2019.
« Coordinated power control of electric vehicles for grid frequency support: MILP-based hierarchical control design ».
IEEE Transactions on Smart Grid, vol. 10, nº 3.
pp. 3364-3373.
Kaur, Kuljeet, Singh, Mukesh et Kumar, Neeraj.
2019.
« Multiobjective optimization for frequency support using electric vehicles: An aggregator-based hierarchical control mechanism ».
IEEE Systems Journal, vol. 13, nº 1.
pp. 771-782.
Kebir, Anouer, Woodward, Lyne et Akhrif, Ouassima.
2019.
« Real-time optimization of renewable energy sources power using neural network-based anticipative extremum-seeking control ».
Renewable Energy, vol. 134.
pp. 914-926.
Kervadec, Hoel, Dolz, Jose, Tang, Meng, Granger, Éric, Boykov, Yuri et Ben Ayed, Ismail.
2019.
« Constrained-CNN losses for weakly supervised segmentation ».
Medical Image Analysis, vol. 54.
pp. 88-99.
Khalifa, Mohamed, Barka, Noureddine, Brousseau, Jean et Bocher, Philippe.
2019.
« Optimization of the edge effect of 4340 steel specimen heated by induction process with flux concentrators using finite element axis-symmetric simulation and experimental validation ».
International Journal of Advanced Manufacturing Technology, vol. 104, nº 9-12.
pp. 4549-4557.
Khalifa, Mohamed, Barka, Noureddine, Brousseau, Jean et Bocher, Philippe.
2019.
« Reduction of edge effect using response surface methodology and artificial neural network modeling of a spur gear treated by induction with flux concentrators ».
International Journal of Advanced Manufacturing Technology, vol. 104, nº 1-4.
pp. 103-117.
Khalifa, Mohamed, Barka, Noureddine, Brousseau, Jean et Bocher, Philippe.
2019.
« Sensitivity study of hardness profile of 4340 steel disc hardened by induction according to machine parameters and geometrical factors ».
International Journal of Advanced Manufacturing Technology, vol. 101, nº 1-4.
pp. 209-221.
Khan, Sharfuddin Ahmed, Chaabane, Amin et Dweiri, Fikri.
2019.
« A knowledge-based system for overall supply chain performance evaluation: a multi-criteria decision making approach ».
Supply Chain Management, vol. 24, nº 3.
pp. 377-396.
Khan, Shehryar, Grigorie, Lucian Teodor, Botez, Ruxandra Mihaela, Mamou, Mahmoud et Mébarki, Youssef.
2019.
« Fuzzy Logic-based control for a morphing wing tip actuation system: design, numerical simulation, and wind tunnel experimental testing ».
Biomimetics, vol. 4, nº 4.
Khanjarpanah, Hossein et Jabbarzadeh, Armin.
2019.
« Sustainable wind plant location optimization using fuzzy cross-efficiency data envelopment analysis ».
Energy, vol. 170.
pp. 1004-1018.
Kheddache, Yasmina et Tadj, Chakib.
2019.
« Identification of diseases in newborns using advanced acoustic features of cry signals ».
Biomedical Signal Processing and Control, vol. 50.
pp. 35-44.
Kikinis, Z., Makris, N., Sydnor, V. J., Bouix, S., Pasternak, O., Coman, I. L., Antshel, K. M., Fremont, W., Kubicki, M. R., Shenton, M. E., Kates, W. R. et Rathi, Y..
2019.
« Abnormalities in gray matter microstructure in young adults with 22q11.2 deletion syndrome ».
NeuroImage: Clinical, vol. 21.
Kohli, Niharika, Ménard, Michaël et Ye, Winnie N..
2019.
« Efficient TE/TM spot-size converter for broadband coupling to single mode fibers ».
OSA Continuum, vol. 2, nº 8.
pp. 2428-2438.
Komba, Nathanael, Wei, Qiliang, Zhang, Gaixia, Rosei, Federico et Sun, Shuhui.
2019.
« Controlled synthesis of graphene via electrochemical route and its use as efficient metal-free catalyst for oxygen reduction ».
Applied Catalysis B: Environmental, vol. 243.
pp. 373-380.
Komba, Nathanael, Zhang, Gaixia, Wei, Qiliang, Yang, Xiaohua, Prakash, Jai, Chenitz, Régis, Rosei, Federico et Sun, Shuhui.
2019.
« Iron (II) phthalocyanine/N-doped graphene: A highly efficient non-precious metal catalyst for oxygen reduction ».
International Journal of Hydrogen Energy, vol. 44, nº 33.
pp. 18103-18114.
Kong, Long et Kaddoum, Georges.
2019.
« Secrecy characteristics with assistance of mixture gamma distribution ».
IEEE Wireless Communications Letters, vol. 8, nº 4.
pp. 1086-1089.
Kong, Long, Kaddoum, Georges et Chergui, Hatim.
2019.
« On physical layer security over fox's H-function wiretap fading channels ».
IEEE Transactions on Vehicular Technology, vol. 68, nº 7.
pp. 6608-6621.
Konopatskii, A. S., Dubinskii, S. M., Zhukova, Yu S., Inaekyan, K., Brailovskii, V., Prokoshkin, S. D. et Filonov, M. R..
2019.
« Experimental Search for Chemical Compositions of Superelastic Titanium Alloys with Enhanced Functional Properties ».
Metal Science and Heat Treatment, vol. 61.
pp. 333-339.
Kouakoua, Kean, Duclos, Cyril, Aissaoui, Rachid, Nadeau, Sylvie et Labbé, David.
2019.
« Influence des vibrations tendineuses sur le niveau d’incarnation d’un avatar virtuel en situation de marche chez des utilisateurs statiques ».
[Résumé d'une communication à une conférence]. Neurophysiologie Clinique, vol. 49, nº 6.
p. 453.
Koubikana Pambou, Claude Hugo, Raymond, Jasmin et Lamarche, Louis.
2019.
« Improving thermal response tests with wireline temperature logs to evaluate ground thermal conductivity profiles and groundwater fluxes ».
Heat and Mass Transfer, vol. 55, nº 6.
pp. 1829-1843.
Kreitcberg, A., Sheremetyev, V., Tsaturyants, M., Prokoshkin, S. et Brailovski, V..
2019.
« Optimization of post-processing annealing conditions of the laser powder bed-fused Ti–18Zr–14Nb shape memory alloy: structure and functional properties ».
Shape Memory and Superelasticity, vol. 5, nº 2.
pp. 172-181.
Kreitcberg, Alena, Inaekyan, Karine, Turenne, Sylvain et Brailovski, Vladimir.
2019.
« Temperature- and time-dependent mechanical behavior of post-treated IN625 alloy processed by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 3.
Kubicki, M., Baxi, M., Pasternak, O., Tang, Y., Karmacharya, S., Chunga, N., Lyall, A. E., Rathi, Y., Eckbo, R., Bouix, S., Mortazavi, F., Papadimitriou, G., Shenton, M. E., Westin, C. F., Killiany, R., Makris, N. et Rosene, D. L..
2019.
« Lifespan trajectories of white matter changes in rhesus monkeys ».
Cerebral Cortex, vol. 29, nº 4.
pp. 1584-1593.
Kuitche, Maxime Alex Junior et Botez, Ruxandra Mihaela.
2019.
« Modeling novel methodologies for unmanned aerial systems – Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam ».
Chinese Journal of Aeronautics, vol. 32, nº 1.
pp. 58-77.
Kumar, Kuldeep, Siddiqi, Kaleem et Desrosiers, Christian.
2019.
« White matter fiber analysis using kernel dictionary learning and sparsity priors ».
Pattern Recognition, vol. 95.
pp. 83-95.
Kumar, Neeraj, Aujla, Gagangeet Singh, Garg, Sahil, Kaur, Kuljeet, Ranjan, Rajiv et Garg, Saurabh Kumar.
2019.
« Renewable energy-based multi-indexed job classification and container management scheme for sustainability of cloud data centers ».
IEEE Transactions on Industrial Informatics, vol. 15, nº 5.
pp. 2947-2957.
Kurusu, Rafael S. et Demarquette, Nicole R..
2019.
« Surface modification to control the water wettability of electrospun mats ».
International Materials Reviews, vol. 64, nº 5.
pp. 249-287.
Laaziz, Lahlou, Kara, Nadjia, Rabipour, Rafi, Edstrom, Claes et Lemieux, Yves.
2019.
« FASTSCALE: A fast and scalable evolutionary algorithm for the joint placement and chaining of virtualized services ».
Journal of Network and Computer Applications, vol. 148.
Lachance-Tremblay, Éric, Vaillancourt, Michel, Perraton, Daniel et Di Benedetto, Hervé.
2019.
« Comparison of the moisture damage of bituminous binder coupled with glass and limestone substrate using pull-off test ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 46, nº 3.
pp. 188-194.
Laflamme-Mayer, Nicolas, Kowarzyk, Gilbert, Blaquière, Yves, Savaria, Yvon et Sawan, Mohamad.
2019.
« A defect-tolerant reusable network of DACs for wafer-scale integration ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 27, nº 2.
pp. 304-315.
Lamarche, Louis.
2019.
« Horizontal ground heat exchangers modelling ».
Applied Thermal Engineering, vol. 155.
pp. 534-545.
Lamarche, Louis et Pasquier, Philippe.
2019.
« Higher-order temporal scheme for ground heat exchanger analytical models ».
Geothermics, vol. 78.
pp. 111-117.
Lanovaz, Marc J., Cardinal, Patrick et Francis, Mary.
2019.
« Using a visual structured criterion for the analysis of alternating-treatment designs ».
Behavior Modification, vol. 43, nº 1.
pp. 115-131.
Lanovaz, Marc J., Turgeon, Stéphanie, Cardinal, Patrick et Wheatley, Tara L..
2019.
« Using single-case designs in practical settings: Is within-subject replication always necessary? ».
Perspectives on Behavior Science, vol. 42, nº 1.
pp. 153-162.
Lapalme, James, Kabiwa, Victorien et Tardif, Pierre-Martin.
2019.
« Relationship between information technology auditors and auditees and their impacts on auditors ».
International Journal of Engineering Business Management, vol. 11.
Lapointe, Mathieu et Barbeau, Benoit.
2019.
« Substituting polyacrylamide with an activated starch polymer during ballasted flocculation ».
Journal of Water Process Engineering, vol. 28.
pp. 129-134.
Larochelle Martin, Gilbert, Monfet, Danielle, Nouanegue, Hervé F., Lavigne, Karine et Sansregret, Simon.
2019.
« Energy calibration of HVAC sub-system model using sensitivity analysis and meta-heuristic optimization ».
Energy and Buildings, vol. 202.
Larose, Gabriel, Fuentes, Alexandre, Lavoie, Frederic, Aissaoui, Rachid, de Guise, Jacques et Hagemeister, Nicola.
2019.
« Can total knee arthroplasty restore the correlation between radiographic mechanical axis angle and dynamic coronal plane alignment during gait? ».
Knee, vol. 26, nº 3.
pp. 586-594.
Latreille, Véronique, Gaubert, Malo, Dubé, Jonathan, Lina, Jean-Marc, Gagnon, Jean-François et Carrier, Julie.
2019.
« Age-related cortical signatures of human sleep electroencephalography ».
Neurobiology of Aging, vol. 76.
pp. 106-114.
Laugier, M., Tremblay, J., Petit, Y., Grignon-Lemieux, A., Levasseur, A. et Lussier, B..
2019.
« Three-dimensional kinematic evaluation of tightrope CCL in a canine in vitro cranial cruciate deficient stifle model ».
Canadian Journal of Veterinary Research, vol. 83, nº 4.
pp. 317-321.
Le, Phuoc Luong, Dao, Thien-My et Chaabane, Amin.
2019.
« BIM-based framework for temporary facility layout planning in construction site: a hybrid approach ».
Construction Innovation, vol. 19, nº 3.
pp. 424-464.
Leclère, Jérôme et Landry, René.
2019.
« Galileo E5 signal acquisition using intermediate coherent integration time ».
Journal of Navigation, vol. 72, nº 3.
pp. 555-574.
Lecours, Caroline, Petit, Yvan et Wagnac, Eric.
2019.
« Biomechanical analysis of head impacts during real time soccer play: A preliminary study ».
[Résumé d'une communication à une conférence]. Medicine and Science in Sports and Exercise, vol. 51, nº 6, suppl.
pp. 472-473.
Lecuru, Quentin, Ethier, Yannic, Carter, Alan et Karray, Mourad.
2019.
« Characterization of cold in-place recycled materials at young age using shear wave velocity ».
Advances in Civil Engineering Materials, vol. 8, nº 1.
pp. 336-354.
Leduc, Martin, Mailhot, Alain, Frigon, Anne, Martel, Jean-Luc, Ludwig, Ralf, Brietzke, Gilbert B., Giguere, Michel, Brissette, François, Turcotte, Richard, Braun, Marco et Scinocca, John.
2019.
« The ClimEx Project: a 50-member ensemble of climate change projections at 12-km resolution over Europe and Northeastern North America with the Canadian regional climate model (CRCM5) ».
Journal of Applied Meteorology and Climatology, vol. 58, nº 4.
pp. 663-693.
Léger, Jérémie, Rousse, Daniel R. et Lassue, Stéphane.
2019.
« Optimal indoor heat distribution: virtual heaters ».
Applied Energy, vol. 254.
pp. 544-555.
Lehoux, Pascale, Daudelin, Geneviève, Denis, Jean-Louis, Gauthier, Phillippe et Hagemeister, Nicola.
2019.
« Pourquoi et comment sont conçues les innovations responsables ? Résultats d'une méta-ethnographie ».
Innovations, vol. 59, nº 2.
pp. 15-42.
Leivadeas, Aris, Kesidis, George, Ibnkahla, Mohamed et Lambadaris, Ioannis.
2019.
« VNF placement optimization at the edge and cloud ».
Future Internet, vol. 11, nº 3.
Lemaire, Clément, Rivest, Louis, Boton, Conrad, Danjou, Christophe, Braesch, Christian et Nyffenegger, Felix.
2019.
« Analyzing BIM topics and clusters through ten years of scientific publications ».
Journal of Information Technology in Construction (ITcon), vol. 24.
pp. 273-298.
Lemaire, Romain, Boudreau, Amélie et Seers, Patrice.
2019.
« Performance and emissions of a DISI engine fueled with gasoline/ethanol and gasoline/C-4 oxygenate blends – Development of a PM index correlation for particulate matter emission assessment ».
Fuel, vol. 241.
pp. 1172-1183.
Lemonnier, D., Mac-Thiong, J. M. et Belanger, P..
2019.
« Transverse spinal cord blood vessels visualization in a pig using plane wave doppler ultrasound imaging ».
Acta Acustica United with Acustica, vol. 105, nº 6.
pp. 1278-1282.
Lemonnier, David, Mac-Thiong, Jean-Marc et Belanger, Pierre.
2019.
« Flow quantification in a wall-less multiple flow phantom using ultrasound plane wave doppler imaging ».
Acta Acustica united with Acustica, vol. 105, nº 1.
pp. 130-138.
Letenneur, Morgan, Kreitcberg, Alena et Brailovski, Vladimir.
2019.
« Optimization of laser powder bed fusion processing using a combination of melt pool modeling and design of experiment approaches: Density control ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 1.
Li, Guannan, St-Onge, David, Pinciroli, Carlo, Gasparri, Andrea, Garone, Emanuele et Beltrame, Giovanni.
2019.
« Decentralized progressive shape formation with robot swarms ».
Autonomous Robots, vol. 43, nº 6.
pp. 1505-1521.
Li, Longguang, Sboui, Lokman, Rezki, Zouheir et Alouini, Mohamed-Slim.
2019.
« On the capacity of fading channels with peak and average power constraints at low SNR ».
IEEE Transactions on Vehicular Technology, vol. 68, nº 1.
pp. 93-100.
Li, Pandeng, Mainville, Mathieu, Zhang, Yuliang, Leclerc, Mario, Sun, Baoquan, Izquierdo, Ricardo et Ma, Dongling.
2019.
« Air-processed, stable organic solar cells with high power conversion efficiency of 7.41% ».
Small, vol. 15, nº 7.
Lina, Jean-Marc, O'Callaghan, Emma Kate et Mongrain, Valérie.
2019.
« Scale-free dynamics of the mouse wakefulness and sleep electroencephalogram quantified using wavelet-leaders ».
Colcks & Sleep, vol. 1, nº 1.
pp. 50-64.
Liu, J. H., Vanderesse, N., Stinville, J. C., Pollock, T. M., Bocher, P. et Texier, D..
2019.
« In-plane and out-of-plane deformation at the sub-grain scale in polycrystalline materials assessed by confocal microscopy ».
Acta Materialia, vol. 169.
pp. 260-274.
Liu, Maning, Zhang, Haichang, Gedamu, Dawit, Fourmont, Paul, Rekola, Heikki, Hiltunen, Arto, Cloutier, Sylvain G., Nechache, Riad, Priimagi, Arri et Vivo, Paola.
2019.
« Halide perovskite nanocrystals for next-generation optoelectronics ».
Small, vol. 15, nº 28.
Luan, Yu, Sgard, Franck, Benacchio, Simon, Nélisse, Hugues et Doutres, Olivier.
2019.
« A transfer matrix model of the IEC 60318-4 ear simulator: Application to the simulation of earplug insertion loss ».
Acta Acustica united with Acustica, vol. 105, nº 6.
pp. 1258-1268.
Luong, Phuong, Gagnon, François, Despins, Charles et Tran, Le-Nam.
2019.
« Optimal energy-efficient beamforming designs for cloud-RANs with rate-dependent fronthaul power ».
IEEE Transactions on Communications, vol. 67, nº 7.
pp. 5099-5113.
Ma, Jugang, Tong, Xin, Wang, Junmei, Zhang, Gaixia, Lv, Yuepeng, Zhu, Yuchen, Sun, Shuhui, Yang, Yung-Chin et Song, Yujun.
2019.
« Rare-earth metal oxide hybridized PtFe nanocrystals synthesized via microfluidic process for enhanced electrochemical catalytic performance ».
Electrochimica Acta, vol. 299.
pp. 80-88.
Ma, Y., Jiang, B., Moosavi-Khoonsari, E., Andersson, S., Opila, E. J. et Tranell, G. M..
2019.
« Oxidation of liquid silicon in air atmospheres containing water vapor ».
Industrial and Engineering Chemistry Research, vol. 58, nº 16.
pp. 6785-6795.
Machado, Inês, Toews, Matthew, George, Elizabeth, Unadkat, Prashin, Essayed, Walid, Luo, Jie, Teodoro, Pedro, Carvalho, Herculano, Martins, Jorge, Golland, Polina, Pieper, Steve, Frisken, Sarah, Golby, Alexandra, Wells III, William et Ou, Yangming.
2019.
« Deformable MRI-Ultrasound registration using correlation-based attribute matching for brain shift correction: accuracy and generality in multi-site data ».
NeuroImage, vol. 202.
Madra, Anna, Causse, Philippe, Trochu, François, Adrien, Jérôme, Maire, Eric et Breitkopf, Piotr.
2019.
« Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans ».
Composite Structures, vol. 224.
Maghrabie, Hesham F., Beauregard, Yvan et Schiffauerova, Andrea.
2019.
« Multi-criteria decision making problems with unknown weight information under uncertain evaluations ».
Computers & Industrial Engineering, vol. 133.
pp. 131-138.
Maghrabie, Hesham, Beauregard, Yvan et Schiffauerova, Andrea.
2019.
« Grey-based multi-criteria decision analysis approach: addressing uncertainty at complex decision problems ».
Technological Forecasting and Social Change, vol. 146.
pp. 366-379.
Mahmoodian, Vahid, Jabbarzadeh, Armin, Rezazadeh, Hassan et Barzinpour, Farnaz.
2019.
« A novel intelligent particle swarm optimization algorithm for solving cell formation problem ».
Neural Computing and Applications, vol. 31, nº 2.
pp. 801-815.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2019.
« A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals ».
International Journal of Material Forming, vol. 12, nº 4.
pp. 693-702.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2019.
« Prediction of material behavior during biaxial stretching of superplastic 5083 aluminum alloy ».
The International Journal of Advanced Manufacturing Technology, vol. 102, nº 5-8.
pp. 2357-2366.
Makhamreh, Hamza, Sleiman, Mohammad, Kukrer, Osman et Al-Haddad, Kamal.
2019.
« Lyapunov-based model predictive control of a PUC7 grid-connected multilevel inverter ».
IEEE Transactions on Industrial Electronics, vol. 66, nº 9.
pp. 7012-7021.
Marefat, Vahid, Duhaime, François, Chapuis, Robert P. et Le Borgne, Vincent.
2019.
« Performance of fully grouted piezometers under transient flow conditions: Field study and numerical results ».
Geotechnical Testing Journal, vol. 42, nº 2.
Marin, Dmitrii, Tang, Meng, Ben Ayed, Ismail et Boykov, Yuri Y..
2019.
« Kernel clustering: density biases and solutions ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 41, nº 1.
pp. 136-147.
Marir, Toufik, El Heq Silem, Abd El, Mokhati, Farid, Gherbi, Abdelouahed et Bali, Ahmed.
2019.
« NorJADE: An open Source JADE-Based framework for programming normative multi-agent systems ».
International Journal of Open Source Software and Processes, vol. 10, nº 2.
Martinez, Nicolas, Benchaabane, Youssef, Silva, Rosa Elvira, Ilinca, Adrian, Ibrahim, Hussein, Chandra, Ambrish et Rousse, Daniel R..
2019.
« Computer model for a wind–diesel hybrid system with compressed air energy storage ».
Energies, vol. 12, nº 18.
Masoumi, F., Shahriari, D., Monajati, H., Cormier, J., Flipo, B. C. D., Devaux, A. et Jahazi, M..
2019.
« Linear friction welding of AD730TM Ni-base superalloy: process-microstructure-property interactions ».
Materials and Design, vol. 183.
Masse-Dufresne, Janie, Baudron, Paul, Barbecot, Florent, Patenaude, Marc, Pontoreau, Coralie, Proteau-Bédard, Francis, Menou, Matthieu, Pasquier, Philippe, Veuille, Sabine et Barbeau, Benoit.
2019.
« Anthropic and meteorological controls on the origin and quality of water at a bank filtration site in Canada ».
Water, vol. 11, nº 12.
Matenine, Dmitri, Schmittbuhl, Matthieu, Bedwani, Stéphane, Després, Philippe et de Guise, Jacques A..
2019.
« Iterative reconstruction for image enhancement and dose reduction in diagnostic cone beam CT imaging ».
Journal of X-Ray Science and Technology, vol. 27, nº 5.
pp. 805-819.
Mathur, Aashish, Ai, Yun, Cheffena, Michael et Kaddoum, Georges.
2019.
« Secrecy performance of correlated α -μ fading channels ».
IEEE Communications Letters, vol. 23, nº 8.
pp. 1323-1327.
Maurel, Pierre, Weiss, Laurent, Bocher, Philippe, Fleury, Eric et Grosdidier, Thierry.
2019.
« Oxide dependent wear mechanisms of titanium against a steel counterface: influence of SMAT nanostructured surface ».
Wear, vol. 430-431.
pp. 245-255.
McAnuff, Connor, Samson, Claire, Melanson, Dave, Polowick, Christopher et Bethell, Erin.
2019.
« Structural mapping of rock walls imaged with a LiDAR mounted on an unmanned aircraft system ».
Journal of Unmanned Vehicle Systems, vol. 7, nº 1.
pp. 21-38.
McGrath, Heather, Abo El Ezz, Ahmad et Nastev, Miroslav.
2019.
« Probabilistic depth–damage curves for assessment of flood-induced building losses ».
Natural Hazards, vol. 97, nº 1.
pp. 1-14.
Mejane, Jeremy, Faubert, Jocelyn, Romeas, Thomas et Labbe, David R..
2019.
« The combined impact of a perceptual–cognitive task and neuromuscular fatigue on knee biomechanics during landing ».
The Knee, vol. 26, nº 1.
pp. 52-60.
Melanson, Annick et Nadeau, Sylvie.
2019.
« Resilience engineering for sustainable prevention in the manufacturing sector: A comparative study of two methods of risk analysis ».
American Journal of Industrial and Business Management, vol. 9, nº 1.
pp. 267-281.
Merabtine, Abdelatif, Kheiri, Abdelhamid, Mokraoui, Salim et Belmerabet, Abderrezak.
2019.
« Semi-analytical model for thermal response of anhydrite radiant slab ».
Building and Environment, vol. 153.
pp. 253-266.
Merabtine, Abdelatif, Mokraoui, Salim, Kheiri, Abdelhamid et Dars, Anass.
2019.
« New transient simplified model for radiant heating slab surface temperature and heat transfer rate calculation ».
Building Simulation, vol. 12, nº 3.
pp. 441-452.
Meridji, Kenza, Al-Sarayreh, Khalid T., Abran, Alain et Trudel, Sylvie.
2019.
« System security requirements: a framework for early identification, specification and measurement of related software requirements ».
Computer Standards and Interfaces, vol. 66.
Mezui, Jean Marie Lauhic Ndong, Nganga-Kouya, Donatien, Okou, Aime Francis, Saad, Maarouf et Hernandez, Brice.
2019.
« A novel control structure for a pioneer mobile robot: simulation and practical implementation ».
International Journal of Modelling, Identification and Control, vol. 33, nº 2.
pp. 108-119.
Mhiri, Mohamed, Desrosiers, Christian et Cheriet, Mohamed.
2019.
« Word spotting and recognition via a joint deep embedding of image and text ».
Pattern Recognition, vol. 88.
pp. 312-320.
Michaud, Martin, Forgues, Eva-Charlotte, Carignan, Vincent, Forgues, Daniel et Ouellet-Plamondon, Claudiane.
2019.
« A lean approach to optimize BIM information flow using value stream mapping ».
Journal of Information Technology in Construction (ITcon), vol. 24.
pp. 472-488.
Mishra, Sanchit, Hussain, Ikhlaq, Singh, Bhim, Chandra, Ambrish, Al-Haddad, Kamal et Shah, Priyank.
2019.
« Frequency adaptive prefiltering stage for differentiation-based control of shunt active filter under polluted grid conditions ».
IEEE Transactions on Industry Applications, vol. 55, nº 1.
pp. 882-891.
Mobarra, Mohammadjavad, Issa, Mohamad, Rezkallah, Miloud et Ilinca, Adrian.
2019.
« Performance optimization of diesel generators using permanent magnet synchronous generator with rotating stator ».
Energy and Power Engineering, vol. 11, nº 7.
Mohammadian, Neda, Turenne, Sylvain et Brailovski, Vladimir.
2019.
« Electropolishing of laser powder bed-fused IN625 components in an ionic electrolyte ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 4.
Mohammadian-Behbahani, Zahra, Jabbarzadeh, Armin et Saman Pishvaee, Mir.
2019.
« A robust optimisation model for sustainable blood supply chain network design under uncertainty ».
International Journal of Industrial and Systems Engineering, vol. 31, nº 4.
pp. 475-494.
Mokhayeri, Fania, Granger, Eric et Bilodeau, Guillaume-Alexandre.
2019.
« Domain-specific face synthesis for video face recognition from a single sample per person ».
IEEE Transactions on Information Forensics and Security, vol. 14, nº 3.
pp. 757-772.
Molina, Sophie, Haillot, Didier, Deydier, Alexandre et Bedecarrats, Jean-Pierre.
2019.
« Material screening and compatibility for thermocline storage systems using thermal oil ».
Applied Thermal Engineering, vol. 146.
pp. 252-259.
Mollmann, Alexander, Gedamu, Dawit, Vivo, Paola, Frohnhoven, Robert, Stadler, Daniel, Fischer, Thomas, Ka, Ibrahima, Steinhorst, Maximilian, Nechache, Riad, Rosei, Federico, Cloutier, Sylvain G., Kirchartz, Thomas et Mathur, Sanjay.
2019.
« Highly compact TiO2 films by spray pyrolysis and application in perovskite solar cells ».
Advanced Engineering Materials, vol. 21, nº 4.
Morales Garza, Viridiana G., Sumner, Jonathon, Nathan, Jörn et Masson, Christian.
2019.
« Evaluating the accuracy of RANS wind flow modeling over forested terrain - Part 1: canopy model validation ».
Journal of Solar Energy Engineering, vol. 141, nº 4.
Morattab, Armin, Dziong, Zbigniew et Sohraby, Kazem.
2019.
« Mode selection map-based vertical handover in D2D enabled 5G networks ».
IET Communications, vol. 13, nº 14.
pp. 2173-2185.
Mousavi, Seyed Sina, Guizani, Lotfi et Ouellet-Plamondon, Claudiane M..
2019.
« On bond-slip response and development length of steel bars in pre-cracked concrete ».
Construction and Building Materials, vol. 199.
pp. 560-573.
Mseddi, Amina, Jaafar, Wael, Elbiaze, Halima et Ajib, Wessam.
2019.
« Joint container placement and task provisioning in dynamic fog computing ».
IEEE Internet of Things Journal, vol. 6, nº 6.
pp. 10028-10040.
Munoz, Mirna, Mejia, Jezreel, Pena, Adriana, Lara, Graciela et Laporte, Claude Y..
2019.
« Transitioning international software engineering standards to academia: analyzing the results of the adoption of ISO/IEC 29110 in four Mexican universities ».
Computer Standards and Interfaces, vol. 66.
Muñoz, Mirna, Peralta, Manuel et Laporte, Claude Y..
2019.
« Análisis de las debilidades que presentan las Entidades Muy Pequeñas al implementar el estándar ISO/IEC 29110: Una comparativa entre estado del arte y el estado de la práctica ».
Revista Ibérica de Sistemas e Tecnologias de Informação, nº 34.
pp. 85-96.
Nadeau, Nicholas A., Bonev, Ilian A. et Joubair, Ahmed.
2019.
« Impedance control self-calibration of a collaborative robot using kinematic coupling ».
Robotics, vol. 8, nº 2.
Nadeau, S., Salmanzadeh, H., Ahmadi, M. et Landau, K..
2019.
« Aviation deicing workers, global risk assessment of musculoskeletal injuries ».
International Journal of Industrial Ergonomics, vol. 71.
pp. 8-13.
Nait Ajjou, Myriam, Assad, Anis, Letourneau Guillon, Laurent, Belanger, Karl, Lemieux Blanchard, Emilie, Lemieux, Bernard, Bahary, Jean-Paul, Masucci, Laura G., Roberge, David, Menard, Cynthia, Lambert, Carole, Moumdjian, Robert, Berthelet, France, Ben-Abdallah, Meriem, De Guise, Jacques et Florescu, Marie.
2019.
« HOUT-28. First-line temozolomide vs PCV for low grade gliomas: A 11 years real-world data from CHUM, university center ».
[Résumé d'une communication à une conférence]. Neuro-Oncology, vol. 21, nº Suppl. 6.
vi118.
Nait Amar, Menad, Shateri, Mohammadhadi, Hemmati-Sarapardeh, Abdolhossein et Alamatsaz, Alireza.
2019.
« Modeling oil-brine interfacial tension at high pressure and high salinity conditions ».
Journal of Petroleum Science and Engineering, vol. 183.
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2019.
« A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions ».
Engineering Structures, vol. 197.
Nassif, Ali Bou, Azzeh, Mohammad, Idri, Ali et Abran, Alain.
2019.
« Software development effort estimation using regression fuzzy models ».
Computational Intelligence and Neuroscience, vol. 2019.
Navarro-Pardo, Fabiola, Tong, Xin, Selopal, Gurpreet S., Cloutier, Sylvain G., Sun, Shuhui, Tavares, Ana C., Zhao, Haiguang, Wang, Zhiming M. et Rosei, Federico.
2019.
« Graphene oxide/cobalt-based nanohybrid electrodes for robust hydrogen generation ».
Applied Catalysis B: Environmental, vol. 245.
pp. 167-176.
Nemati, Ali, Nadeau, Sylvie et Ateme-Nguema, Barthélémy.
2019.
« Lean mining, productivity and occupational health and safety: An expert-elicitation study ».
American Journal of Industrial and Business Management, vol. 9, nº 11.
pp. 2034-2049.
Nerguizian, Vahé, Stiharu, Ion, Al-Azzam, Nosayba, Yassine-Diab, Bader et Alazzam, Anas.
2019.
« The effect of dielectrophoresis on living cells: crossover frequencies and deregulation in gene expression ».
Analyst, vol. 144, nº 12.
pp. 3853-3860.
Neshenko, Nataliia, Bou-Harb, Elias, Crichigno, Jorge, Kaddoum, Georges et Ghani, Nasir.
2019.
« Demystifying IoT security: an exhaustive survey on IoT vulnerabilities and a first empirical look on internet-scale IoT exploitations ».
IEEE Communications Surveys & Tutorials, vol. 21, nº 3.
pp. 2702-2733.
Nguyen, Cong-Long, Tartakovsky, Boris et Woodward, Lyne.
2019.
« Harvesting energy from multiple microbial fuel cells with a high-conversion efficiency power management system ».
ACS Omega, vol. 4, nº 21.
pp. 18978-18986.
Nguyen, Hai Tran, Nguyen, Dong Thanh, Le, Giang Truong, Tomul, Fatma, Lima, Eder C., Woo, Seung Han, Sarmah, Ajit K., Nguyen, Hung Quang, Nguyen, Phuong Tri, Nguyen, Dinh Duc, Nguyen, Tien Vinh, Vigneswaran, Saravanamuth, Vo, Dai-Viet N. et Chao, Huan-Ping.
2019.
« Adsorption mechanism of hexavalent chromium onto layered double hydroxides-based adsorbents: A systematic in-depth review ».
Journal of Hazardous Materials, vol. 373.
pp. 258-270.
Nguyen, Trung Hieu, Nguyen-Tri, Phuong et Garnier, Francois.
2019.
« Evaluation of the relationship between the aerothermodynamic process and operational parameters in the high-pressure turbine of an aircraft engine ».
Aerospace Science and Technology, vol. 86.
pp. 93-105.
Nguyen, Trung Hieu, Nguyen-Tri, Phuong, Vancassel, Xavier et Garnier, François.
2019.
« Aero-thermodynamic and chemical process interactions in an axial high-pressure turbine of aircraft engines ».
International Journal of Engine Research, vol. 20, nº 6.
pp. 653-669.
NguyenTran, Hai, Van Pham, Viet, Vo, Dai-Viet N. et Nguyen-Tri, Phuong.
2019.
« Comment on “Removal of hexavalent chromium by biochar supported nZVI composite: Batch and fixed-bed column evaluations, mechanisms, and secondary contamination prevention” ».
Chemosphere, vol. 233.
pp. 988-990.
Nguyen-Tri, Phuong, Altiparmak, Funda, Nguyen, Nam, Tuduri, Ludovic, Ouellet-Plamondon, Claudiane M. et Prud’homme, Robert E..
2019.
« Robust superhydrophobic cotton fibers prepared by simple dip-coating approach using chemical and plasma-etching pretreatments ».
ACS Omega, vol. 4, nº 4.
pp. 7829-7837.
Nguyen-Tri, Phuong, Nguyen, Hai Tran, Ouellet Plamondon, Claudiane, Vo, Dai-Viet N., Nanda, Sonil, Mishra, Adhilasha, Chao, Huan-Ping et Bajpai, A. K..
2019.
« Recent progress in the preparation, properties and applications of superhydrophobic nano-based coatings and surfaces: a review ».
Progress in organic coatings, vol. 132.
pp. 235-256.
Nguyen-Tri, Phuong, Nguyen, Van Thang et Nguyen, Tuan Anh.
2019.
« Biological activity and nanostructuration of Fe3O4-Ag/High Density Polyethylene nanocomposites ».
Journal of Composites Science, vol. 3, nº 2.
Nguyen-Tri, Phuong et Prud'homme, Robert E..
2019.
« Nanoscale analysis of the photodegradation of polyester fibers by AFM-IR ».
Journal of Photochemistry and Photobiology A: Chemistry, vol. 371.
pp. 196-204.
Nguyen-Tri, Phuong, Triki, Ennouri et Nguyen, Anh Tuan.
2019.
« Butyl rubber-based composite: Thermal degradation and prediction of service lifetime ».
Journal of Composites Science, vol. 3, nº 2.
Niknam, Seyed Ali, Saberi, Masoud, Kouam, Jules, Hashemi, Ramin, Songmene, Victor et Balazinski, Marek.
2019.
« Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC) ».
Journal of Central South University, vol. 26, nº 6.
pp. 1563-1572.
Niknam, Seyed Ali, Tiabi, Azziz et Songmene, Victor.
2019.
« Burr edge occupancy: edge finishing index for milling machined parts ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 43, nº 2.
pp. 248-255.
Noumeir, Rita.
2019.
« Active learning of the HL7 medical standard ».
Journal of Digital Imaging, vol. 32, nº 3.
pp. 354-361.
Odier, Nicolas, Sanjosé, Marlène, Gicquel, Laurent, Poinsot, Thierry, Moreau, Stéphane et Duchaine, Florent.
2019.
« A characteristic inlet boundary condition for compressible, turbulent, multispecies turbomachinery flows ».
Computers & Fluids, vol. 178.
pp. 41-55.
Oliver, Peter, Samson, Claire et Kenny, Shawn.
2019.
« Systematic preparation and processing of interferometric synthetic aperture radar data for monitoring linear transportation infrastructure ».
Journal of Applied Remote Sensing, vol. 13, nº 2.
Olufayo, Oluwole A., Che, Hanqing, Songmene, Victor, Katsari, Christina et Yue, Stephen.
2019.
« Machinability of Rene 65 superalloy ».
Materials, vol. 12, nº 12.
Omran, Allafi et Kadoch, Michel.
2019.
« Balancing D2D communication relayed traffic offloading in multi-tier HetNets ».
International Journal of Communications, Network and System Sciences (IJCNS), vol. 2, nº 6.
pp. 75-97.
Osman, Kawther, Ghommam, Jawhar, Mehrjerdi, Hasan et Saad, Maarouf.
2019.
« Vision-based curved lane keeping control for intelligent vehicle highway system ».
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol. 233, nº 8.
pp. 961-979.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2019.
« Production and replacement planning of a deteriorating remanufacturing system in a closed-loop configuration ».
Journal of Manufacturing Systems, vol. 53.
pp. 234-248.
Ouellet, Yannick, Savaria, Christian, Roy, François, Moustapha, Hany et Garnier, François.
2019.
« A Preliminary design system for turbine discs ».
International Journal of Turbo & Jet-Engines, vol. 36, nº 3.
pp. 329-338.
Ouhimmou, Mustapha, Nourelfath, Mustapha, Bouchard, Mathieu et Bricha, Naji.
2019.
« Design of robust distribution network under demand uncertainty: a case study in the pulp and paper ».
International Journal of Production Economics, vol. 218.
pp. 96-105.
Ouni, Ali, Wang, Hanzhang, Kessentini, Marouane, Bouktif, Salah et Inoue, Katsuro.
2019.
« A hybrid approach for improving the design quality of web service interfaces ».
ACM Transactions on Internet Technology, vol. 19, nº 1.
P. De Koninck, Beatrice, Guay, Samuel, Proulx-Bégin, Lea, Masse, Ian, Lina, Jean-Marc, Carrier, Julie et De Beaumont, Louis.
2019.
« Abstract #129: Characterization of tACS parameters to optimize the increase of EEG alpha power ».
[Résumé d'une communication à une conférence]. Brain Stimulation, vol. 12, nº 2.
e44-e45.
Padois, Thomas, Doutres, Olivier et Sgard, Franck.
2019.
« On the use of modified phase transform weighting functions for acoustic imaging with the generalized cross correlation ».
Journal of the Acoustical Society of America, vol. 145, nº 3.
pp. 1546-1555.
Padois, Thomas, Doutres, Olivier, Sgard, Franck et Berry, Alain.
2019.
« Optimization of a spherical microphone array geometry for localizing acoustic sources using the generalized cross-correlation technique ».
Mechanical Systems and Signal Processing, vol. 132.
pp. 546-559.
Padois, Thomas, Gaudreau, Marc-André, Marcotte, Pierre et Laville, Frédéric.
2019.
« Identification of noise sources using a time domain beamforming on pneumatic, gas and electric nail guns ».
Noise Control Engineering Journal, vol. 67, nº 1.
pp. 11-22.
Palma, Francis, Moha, Naouel et Gueheneuc, Yann-Gäel.
2019.
« UniDoSA: The unified specification and detection of service antipatterns ».
IEEE Transactions on Software Engineering, vol. 45, nº 10.
pp. 1024-1053.
Palussiere, J., De Baere, T., Garnon, J., Valette, P. J., Ghelfi, J., Frandon, J., Soulez, G., Bouvier, A., Sapoval, M., Lerouge, S., Yu, F., Gaubert, J. Y., Kheiri, M., Barral, P. A., Tradi, F., Habert, P., Hak, J. F., Bartoli, A., Beregi, J. P., Vernhet, H., De Bazelaire, C., De Kerviler, E., Tasu, J. P., Dabadie, A., Vidal, V. et Jacquier, A..
2019.
« Mise au point en radiologie interventionnelle ».
Journal d'imagerie diagnostique et interventionnelle, vol. 2, nº 5.
pp. 235-240.
Peiret, Albert, Andrews, Sheldon, Kövecses, József, Kry, Paul G. et Teichmann, Marek.
2019.
« Schur complement-based substructuring of stiff multibody systems with contact ».
ACM Transactions on Graphics, vol. 38, nº 5.
Pellegrino, Giovanni, Hedrich, Tanguy, Porras-Bettancourt, Manuel, Lina, Jean-Marc, Grova, Christophe et Kobayashi, Eliane.
2019.
« Accuracy and spatial properties of distributed magnetic source imaging (dMSI) techniques in the investigation of focal epilepsy patients ».
[Résumé d'une communication à une conférence]. Clinical Neurophysiology, vol. 130, nº 8.
e117.
Pereira, Daniel, Haiat, Guillaume, Fernandes, Julio et Belanger, Pierre.
2019.
« Effect of intracortical bone properties on the phase velocity and cut-off frequency of low-frequency guided wave modes (20-85 kHz) ».
Journal of the Acoustical Society of America, vol. 145, nº 1.
pp. 121-130.
Perraton, Daniel, Di Benedetto, Hervé, Carter, Alan et Proteau, Marc.
2019.
« Link between different bottom-up fatigue's law coefficients of mechanical-empirical pavement design software ».
Construction and Building Materials, vol. 216.
pp. 552-563.
Petrillo, Fabio, Guéhéneuc, Yann-Gaël, Pimenta, Marcelo, Freitas, Carla Dal Sasso et Khomh, Foutse.
2019.
« Swarm debugging: The collective intelligence on interactive debugging ».
Journal of Systems and Software, vol. 153.
pp. 152-174.
Pham, Chuan, Tran, Nguyen H., Ren, Shaolei, Hong, Choong Seon, Nguyen, Kim Khoa et Cheriet, Mohamed.
2019.
« Joint energy scheduling and water saving in geo-distributed mixed-use buildings ».
IEEE Transactions on Smart Grid, vol. 10, nº 5.
pp. 5345-5359.
Piengang, Fabrice Chilly Ngamaleu, Beauregard, Yvan et Kenné, Jean-Pierre.
2019.
« An APS software selection methodology integrating experts and decisions-maker’s opinions on selection criteria: a case study ».
Cogent Engineering, vol. 6, nº 1.
Pirnia, Pirnia, Duhaime, François, Ethier, Yannic et Dubé, Jean-Sébastien.
2019.
« ICY: An interface between COMSOL multiphysics and discrete element code YADE for the modelling of porous media ».
Computers and Geosciences, vol. 123.
pp. 38-46.
Pirnia, Pouyan, Duhaime, François, Ethier, Yannic et Dubé, Jean-Sébastien.
2019.
« Drag force calculations in polydisperse DEM simulations with the coarse-grid method: influence of the weighting method and improved predictions through artificial neural networks ».
Transport in Porous Media, vol. 129, nº 3.
pp. 837-853.
Plamondon, E. et Seers, P..
2019.
« Parametric study of pilot–main injection strategies on the performance of a light-duty diesel engine fueled with diesel or a WCO biodiesel–diesel blend ».
Fuel, vol. 236.
pp. 1273-1281.
Polotski, V., Kenne, J. P. et Gharbi, A..
2019.
« Joint production and maintenance optimization in flexible hybrid manufacturing-remanufacturing systems under age-dependent deterioration ».
International Journal of Production Economics, vol. 216.
pp. 239-254.
Polotski, Vladimir, Beauregard, Yvan et Franzoni, Arthur.
2019.
« Combining predetermined and measured assembly time techniques: Parameter estimation, regression and case study of fenestration industry ».
International Journal of Production Research, vol. 57, nº 17.
pp. 5499-5519.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2019.
« Optimal production and corrective maintenance in a failure-prone manufacturing system under variable demand ».
Flexible Services and Manufacturing Journal, vol. 31, nº 4.
pp. 894-925.
Polotski, Vladmir, Kenné, Jean-Pierre et Gharbi, Ali.
2019.
« Production control of hybrid manufacturing-remanufacturing systems under demand and return variations ».
International Journal of Production Research, vol. 57, nº 1.
pp. 100-123.
Poulin, J.-R., Kreitcberg, A., Terriault, P. et Brailovski, V..
2019.
« Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity ».
International Journal of Fatigue, vol. 127.
pp. 144-156.
Pourzadi, Aref, Isapour, Aria et Kouki, Ammar.
2019.
« Design of compact dual-band LTCC second-order chebyshev bandpass filters using a direct synthesis approach ».
IEEE Transactions on Microwave Theory and Techniques, vol. 67, nº 4.
pp. 1441-1451.
Pradhan, Surendra K., Cofie, Olufunke, Nikiema, Josiane et Heinonen-Tanski, Helvi.
2019.
« Fecal sludge derived products as fertilizer for lettuce cultivation in urban agriculture ».
Sustainability, vol. 11, nº 24.
Prakash, Jai, Swart, Hendrik C., Zhang, Gaixia et Sun, Shuhui.
2019.
« Emerging applications of atomic layer deposition for the rational design of novel nanostructures for surface-enhanced Raman scattering ».
Journal of Materials Chemistry C, vol. 7, nº 6.
pp. 1447-1471.
Preti, Francesco, Gouveia, Beatriz Chagas Silva, Rahmanbeiki, Amir, Romeo, Elena, Carter, Alan et Tebaldi, Gabriele.
2019.
« Application and validation of the cohesion test to characterise reclaimed asphalt pavement ».
Road Materials and Pavement Design, vol. 20, nº suppl. 1.
S434-S445.
Prokoshkin, Sergey, Dubinskiy, Sergey et Brailovski, Vladimir.
2019.
« Features of a nanosubgrained structure in deformed and annealed Ti–Ni SMA: A brief review ».
Shape Memory and Superelasticity, vol. 5, nº 4.
pp. 336-345.
Prokoshkin, Sergey, Dubinskiy, Sergey, Korotitskiy, Andrey, Konopatsky, Anton, Sheremetyev, Vadim, Shchetinin, Igor, Glezer, Alexander et Brailovski, Vladimir.
2019.
« Nanostructure features and stress-induced transformation mechanisms in extremely fine-grained titanium nickelide ».
Journal of Alloys and Compounds, vol. 779.
pp. 667-685.
Proteau, Antoine, Tahan, Antoine et Thomas, Marc.
2019.
« Specific cutting energy: a physical measurement for representing tool wear ».
International Journal of Advanced Manufacturing Technology, vol. 103, nº 1-4.
pp. 101-110.
Qi, Fei, Zhu, Xuetian, Mang, Ge, Kadoch, Michel et Li, Wei.
2019.
« UAV network and IoT in the sky for future smart cities ».
IEEE Network, vol. 33, nº 2.
pp. 96-101.
Quach, Truong Xuan, Tran, Hung, Uhlemann, Elisabeth, Kaddoum, Georges et Tran, Quang Anh.
2019.
« Power allocation policy and performance analysis of secure and reliable communication in cognitive radio networks ».
Wireless Networks, vol. 25, nº 4.
pp. 1477-1489.
Raschia, Simone, Graziani, Andrea, Carter, Alan et Perraton, Daniel.
2019.
« Laboratory mechanical characterisation of cold recycled mixtures produced with different RAP sources ».
Road Materials and Pavement Design, vol. 20, nº Supp. 1.
S233-S246.
Raschia, Simone, Mignini, Chiara, Graziani, Andrea, Carter, Alan, Perraton, Daniel et Vaillancourt, Michel.
2019.
« Effect of gradation on volumetric and mechanical properties of cold recycled mixtures (CRM) ».
[Article de conférence]. Road Materials and Pavement Design, vol. 20, nº S2.
S740-S754.
Reátegui, Ruth, Ratté, Sylvie, Bautista-Valarezo, Estefanía et Duque, Víctor.
2019.
« Cluster analysis of obesity disease based on comorbidities extracted from clinical notes ».
Journal of Medical Systems, vol. 43, nº 3.
Rehouma, Haythem, Noumeir, Rita, Masson, Gabriel, Essouri, Sandrine et Jouvet, Philippe.
2019.
« Visualizing and quantifying thoraco-abdominal asynchrony in children from motion point clouds: A pilot study ».
IEEE Access, vol. 7.
pp. 163341-163357.
Renaud, Jean, Houssin, Rémy, Gardoni, Mickaël et Armaghan, Negar.
2019.
« Product manual elaboration in product design phases: behavioral and functional analysis based on user experience ».
International Journal of Industrial Ergonomics, vol. 71.
pp. 75-83.
Rezabeigi, Ehsan et Demarquette, Nicole R..
2019.
« Ultraporous membranes electrospun from nonsolvent-induced phase-separated ternary systems ».
Macromolecular Rapid Communications, vol. 40, nº 9.
Rezkallah, Miloud, Chandra, Ambrish, Singh, Bhim et Singh, Sanjeev.
2019.
« Microgrid: Configurations, Control and Applications ».
IEEE Transactions on Smart Grid, vol. 10, nº 2.
pp. 1290-1302.
Rezkallah, Miloud, Chandra, Ambrish, Tremblay, Marco et Ibrahim, Hussein.
2019.
« Experimental implementation of an APC with enhanced MPPT for standalone solar photovoltaic based water pumping station ».
IEEE Transactions on Sustainable Energy, vol. 10, nº 1.
pp. 181-191.
Rezkallah, Miloud, Singh, Sanjeev, Chandra, Ambrish, Singh, Bhim, Tremblay, Marco, Saad, Maarouf et Geng, Hua.
2019.
« Comprehensive controller implementation for wind-PV-diesel based standalone microgrid ».
IEEE Transactions on Industry Applications, vol. 55, nº 5.
pp. 5416-5428.
Rivest, Louis, Braesch, Christian, Nyffenegger, Felix, Danjou, Christophe, Maranzana, Nicolas et Segonds, Frédéric.
2019.
« Identifying PLM themes and clusters from a decade of research literature ».
International Journal of Product Lifecycle Management, vol. 12, nº 2.
pp. 81-106.
Robin, Olivier, Berry, Alain, Kafui Amédin, Celse, Atalla, Noureddine, Doutres, Olivier et Sgard, Franck.
2019.
« Laboratory and in situ sound absorption measurement under a synthetized diffuse acoustic field ».
Building Acoustics, vol. 26, nº 4.
pp. 223-242.
Rodrigues, Samuel F., Siciliano, Fulvio, Aranas Jr., Clodualdo, Silva, Eden S., Reis, Gedeon S., Jahazi, Mohammad et Jonas, John J..
2019.
« Dynamic phase transformation behavior of a Nb-microalloyed steel during roughing passes at temperatures above the Ae3 ».
Metals, vol. 9, nº 3.
Rohart, V., Dubé, M. et Laberge Lebel, L..
2019.
« Lap shear strength effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ».
SAMPE Journal, vol. 55, nº 3.
pp. 30-37.
Rohoden, Katty, Estrada, Rebeca, Otrok, Hadi et Dziong, Zbigniew.
2019.
« Stable femtocells cluster formation and resource allocation based on cooperative game theory ».
Computer Communications, vol. 134.
pp. 30-41.
Romeas, Thomas, Chaumillon, Romain, Labbé, David et Faubert, Jocelyn.
2019.
« Combining 3D-MOT with sport decision-making for perceptual-cognitive training in virtual reality ».
Perceptual and Motor Skills, vol. 126, nº 5.
pp. 922-948.
Ropagnol, X., Kovács, Zs, Gilicze, B., Zhuldybina, M., Blanchard, F., Garcia-Rosas, C. M., Szatmári, S., Földes, I. B. et Ozaki, T..
2019.
« Intense sub-terahertz radiation from wide-bandgap semiconductor based large-aperture photoconductive antennas pumped by UV lasers ».
New Journal of Physics, vol. 21, nº 11.
Saadati, Mohammad, Edalat Nobarzad, Amir Keyvan et Jahazi, Mohammad.
2019.
« On the hot cracking of HSLA steel welds: Role of epitaxial growth and HAZ grain size ».
Journal of Manufacturing Processes, vol. 41.
pp. 242-251.
Saber, Hamed H., AlShehri, Saleh A. et Maref, Wahid.
2019.
« Performance optimization of cascaded and non-cascaded thermoelectric devices for cooling computer chips ».
Energy Conversion and Management, vol. 191.
pp. 174-192.
Saber, Hamed H. et Maref, Wahid.
2019.
« Energy performance of cool roofs followed by development of practical design tool ».
Frontiers in Energy Research, vol. 7.
Saber, Hamed H., Maref, Wahid et Hajiah, Ali E..
2019.
« Hygrothermal performance of cool roofs subjected to Saudi climates ».
Frontiers in Energy Research, vol. 7.
Saberi, Leila, McLaughlin, Rachel T., Crystal Ng, G. H., La Frenierre, Jeff, Wickert, Andrew D., Baraer, Michel, Zhi, Wei, Li, Li et Mark, Bryan G..
2019.
« Multi-scale temporal variability in meltwater contributions in a tropical glacierized watershed ».
Hydrology and Earth System Sciences, vol. 23, nº 1.
pp. 405-425.
Sabir, Fatima, Palma, Francis, Rasool, Ghulam, Guéhéneuc, Yann-Gäel et Moha, Naouel.
2019.
« A systematic literature review on the detection of smells and their evolution in object-oriented and service-oriented systems ».
Software - Practice and Experience, vol. 49, nº 1.
pp. 3-39.
Saboktakin, A., Shahrouz, M., Vu-Khanh, T. et Bicerano, J..
2019.
« X-ray computed tomography characterization of 3D tufted twill textile composite for aerostructures ».
Journal of Harbin Institute of Technology (New Series), vol. 26, nº 3.
pp. 7-13.
Saidi, M. N., Songmene, V., Kouam, J. et Bahloul, A..
2019.
« Study of surface quality and dust particles emission and dispersion during dry polishing of granite ».
International Journal of Advanced Manufacturing Technology, vol. 104.
pp. 4675-4684.
Saint-Louis, P., Morency, M. C. et Lapalme, J..
2019.
« Examination of explicit definitions of enterprise architecture ».
International Journal of Engineering Business Management, vol. 11.
Saliani, Saeed S., Carter, Alan, Baaj, Hassan et Mikhailenko, Peter.
2019.
« Characterization of recovered bitumen from coarse and fine reclaimed asphalt pavement particles ».
Infrastructures, vol. 4, nº 2.
Saliani, Saeed S., Carter, Alan, Baaj, Hassan et Tavassoti, Pejoohan.
2019.
« Characterization of asphalt mixtures produced with coarse and fine recycled asphalt particles ».
Infrastructures, vol. 4, nº 4.
Samoilenko, Mykhailo, Seers, Patrice, Terriault, Patrick et Brailovski, Vladimir.
2019.
« Design, manufacture and testing of porous materials with ordered and random porosity: application to porous medium burners ».
Applied Thermal Engineering, vol. 158.
Sanchez, E., Arbour, C., El-Khatib, H., Marcotte, K., Blais, H., Baril, A. A., Bedetti, C., Descoteaux, M., Lina, J. M., Gilbert, D., Carrier, J. et Gosselin, N..
2019.
« Sleep spindles are resilient to extensive white matter deterioration ».
[Résumé d'une communication à une conférence]. Sleep Medicine, vol. 64.
S333.
Sandoval, Francisco, Poitau, Gwenael et Gagnon, François.
2019.
« On optimizing the PAPR of OFDM signals with coding, companding, and MIMO ».
IEEE Access, vol. 7.
pp. 24132-24139.
Sandoval, Francisco, Poitau, Gwenael et Gagnon, François.
2019.
« Optimizing forward error correction codes for COFDM with reduced PAPR ».
IEEE Transactions on Communications, vol. 67, nº 7.
pp. 4605-4619.
Sanjose, Marlene, Towne, Aaron, Jaiswal, Prateek, Moreau, Stephane, Lele, Sanjiva et Mann, Adrien.
2019.
« Modal analysis of the laminar boundary layer instability and tonal noise of an airfoil at Reynolds number 150,000 ».
International Journal of Aeroacoustics, vol. 18, nº 2-3.
pp. 317-350.
Santoro, Pablo, Fossati, Monica, Tassi, Pablo, Huybrechts, Nicolas, Pham Van Bang, Damien et Piedra-Cueva, Ismael.
2019.
« Effect of self-weight consolidation on a hydro-sedimentological model for the Río de la Plata estuary ».
International Journal of Sediment Research, vol. 34, nº 5.
pp. 444-454.
Sarafan, Sheida, Wanjara, Priti, Lévesque, Jean-Benoît, Gholipour, Javad, Champliaud, Henri et Mathieu, Louis.
2019.
« Residual stresses, microstructure, and mechanical properties of EB-Welded 90-mm-Thick UNS S41500 martensitic stainless steel after PWHT ».
Materials Performance and Characterization, vol. 8, nº 4.
pp. 648-663.
Sarr, Ndéye Bineta, Oyedapo, Olufemi J., Agba, Basile L., Gagnon, François, Boeglen, Hervé et Vauzelle, Rodolphe.
2019.
« Cooperative closed-loop coded-MIMO transmissions for smart grid wireless applications ».
Wireless Communications & Mobile Computing, vol. 2019.
Sattar, Zeeshan, Evangelista, Joao V. C., Kaddoum, Georges et Batani, Naïm.
2019.
« Spectral efficiency analysis of the decoupled access for downlink and uplink in two-tier network ».
IEEE Transactions on Vehicular Technology, vol. 68, nº 5.
pp. 4871-4883.
Sboui, Lokman, Rezki, Zouheir, Sultan, Ahmed et Alouini, Mohamed-Slim.
2019.
« A new relation between energy efficiency and spectral efficiency in wireless communications systems ».
IEEE Wireless Communications, vol. 26, nº 3.
pp. 168-174.
Sebaaly, Fadia, Vahedi, Hani, Kanaan, Hadi Y. et Al-Haddad, Kamal.
2019.
« Experimental design of fixed switching frequency model predictive control for sensor-less five-level packed u-cell inverter ».
IEEE Transactions on Industrial Electronics, vol. 66, nº 5.
pp. 3427-3434.
Sehad, Abdenour, Chibani, Youcef, Hedjam, Rachid et Cheriet, Mohamed.
2019.
« Gabor filter-based texture for ancient degraded document image binarization ».
Pattern Analysis and Applications, vol. 22, nº 1.
pp. 1-22.
Selim, Bassant, Muhaidat, Sami, Sofotasios, Paschalis C., Al-Dweik, Arafat, Sharif, Bayan S. et Stouraitis, Thanos.
2019.
« Radio-frequency front-end impairments: Performance degradation in nonorthogonal multiple access communication systems ».
IEEE Vehicular Technology Magazine, vol. 14, nº 1.
pp. 89-97.
Shafiee, Ahad, Moon, Jongun, Kim, Hyoung Seop, Jahazi, Mohammad et Nili-Ahmadabadi, Mahmoud.
2019.
« Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy ».
Materials Science and Engineering A, vol. 749.
pp. 271-280.
Shah, Priyank, Hussain, Ikhlaq, Singh, Bhim, Chandra, Ambrish et Al-Haddad, Kamal.
2019.
« GI-based control scheme for single-stage grid interfaced SECS for power quality improvement ».
IEEE Transactions on Industry Applications, vol. 55, nº 1.
pp. 869-881.
Shahkolaei, Atena, Beghdadi, Azeddine et Cheriet, Mohamed.
2019.
« Blind quality assessment metric and degradation classification for degraded document images ».
Signal Processing: Image Communication, vol. 76.
pp. 11-21.
Shahsavari, Yahya, Shahhoseini, Hadishahriar, Zhang, Kaiwen et Elbiaze, Halima.
2019.
« A theoretical model for analysis of firewalls under bursty traffic flows ».
IEEE Access, vol. 7.
pp. 183311-183321.
Shameli Sendi, Alireza, Jarraya, Yosr, Pourzandi, Makan et Cheriet, Mohamed.
2019.
« Efficient provisioning of security service function chaining using network security defense patterns ».
IEEE Transactions on Services Computing, vol. 12, nº 4.
pp. 534-549.
Sharifzadeh, Mohammad et Al-Haddad, Kamal.
2019.
« Packed E-Cell (PEC) converter topology operation and experimental validation ».
IEEE Access, vol. 7.
pp. 93049-93061.
Sharifzadeh, Mohammad, Chouinard, Gabriel et Al-Haddad, Kamal.
2019.
« Compatible selective harmonic elimination for three-phase four-wire NPC inverter with DC-Link capacitor voltage balancing ».
IEEE Transactions on Industrial Informatics.
Sharifzadeh, Mohammad, Vahedi, Hani, Portillo, Ramon, Garcia Franquelo, Leopoldo et Al-Haddad, Kamal.
2019.
« Selective harmonic mitigation based self-elimination of triplen harmonics for single-phase five-level inverters ».
IEEE Transactions on Power Electronics, vol. 34, nº 1.
pp. 86-96.
Sharma, Manish, Pradhan, Prabin et Ung, Bora.
2019.
« Endlessly mono-radial annular core photonic crystal fiber for the broadband transmission and supercontinuum generation of vortex beams ».
Scientific Reports, vol. 9, nº 1.
Sharma, Smarjeet et Constantin, Nicolas G..
2019.
« Nonlinear three-port representation of PAs for embedded self-calibration of envelope-dependent dynamic biasing implementations ».
IEEE Access, vol. 7.
pp. 172796-172815.
Sharma, Suraj, Kohli, Niharika, Briere, Jonathan, Menard, Michaël et Nabki, Frederic.
2019.
« Translational MEMS platform for planar optical switching fabrics ».
Micromachines, vol. 10, nº 7.
Sheremet'ev, V. A., Kudryashova, A. A., Dinh, Xuan Ta, Galkin, S. P., Prokoshkin, S. D. et Brailovskii, V..
2019.
« Advanced technology for preparing bar from medical grade Ti-Zr-Nb superelastic alloy based on combination of radial-shear rolling and rotary forging ».
Metallurgist, vol. 63, nº 1-2.
pp. 51-61.
Sheremetyev, V., Kudryashova, A., Cheverikin, V., Korotitskiy, A., Galkin, S., Prokoshkin, S. et Brailovski, V..
2019.
« Hot radial shear rolling and rotary forging of metastable beta Ti-18Zr-14Nb (at. %) alloy for bone implants: microstructure, texture and functional properties ».
Journal of Alloys and Compounds.
pp. 320-326.
Sheremetyev, Vadim, Ijaz, Muhammad Farzik, Kudryashova, Anastasia, Konopatsky, Anton S., Prokoshkin, Sergey et Brailovski, Vladimir.
2019.
« Characterization of the superelastic and structural characteristics of β-Ti alloys by strain-controlled cycling after thermomechanical processing and subsequent ageing ».
Journal of Metastable and Nanocrystalline Materials, vol. 31.
pp. 43-50.
Shimabuku, E., Beca, A. L., Tanaka, W. Y., da Silva, A. M. et de Paula Ferreira, W..
2019.
« Competências dos gerentes de projetos na construção civil: estudo de caso em uma construtora da cidade de São Paulo ».
GEPROS, vol. 14, nº 1.
pp. 176-188.
Shnfir, Mohamed, Olufayo, Oluwole A., Jomaa, Walid et Songmene, Victor.
2019.
« Machinability study of hardened 1045 steel when milling with ceramic cutting inserts ».
Materials, vol. 12, nº 23.
Singh, Amritpal, Garg, Sahil, Kaur, Kuljeet, Batra, Shalini, Kumar, Neeraj et Choo, Kim-Kwang Raymond.
2019.
« Fuzzy-folded bloom filter-as-a-service for big data storage in the cloud ».
IEEE Transactions on Industrial Informatics, vol. 15, nº 4.
pp. 2338-2348.
Slamani, Mohamed et Chatelain, Jean-François.
2019.
« Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs) ».
Journal of Manufacturing Processes, vol. 37.
pp. 177-195.
Slamani, Mohamed, Chatelain, Jean-Francois et Hamedanianpour, Hossein.
2019.
« Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers ».
International Journal of Material Forming, vol. 12, nº 3.
pp. 331-353.
Slim, Hussein et Nadeau, Sylvie.
2019.
« A proposal for a predictive performance assessment model in complex sociotechnical systems combining fuzzy logic and the Functional Resonance Analysis Method (FRAM) ».
American Journal of Industrial and Business Management, vol. 9, nº 6.
pp. 1345-1375.
Snaiki, Reda et Wu, Teng.
2019.
« Knowledge-enhanced deep learning for simulation of tropical cyclone boundary-layer winds ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 194.
Snaiki, Reda et Wu, Teng.
2019.
« Modeling rain-induced effects on boundary-layer wind field of tropical cyclones ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 194.
Soldatenko, A. S., Karachevtseva, M. A., Sheremetyev, V. A., Kudryashova, A. A., Arkhipova, A. Y., Andreev, V. A., Prokoshkin, S. D., Brailovski, V., Moisenovich, M. M. et Shaitan, K. V..
2019.
« Features of in vitro interaction of osteoblast-like MG-63 cells with the surface of Ti-Zr-Nb shape memory alloys ».
Moscow University Biological Sciences Bulletin, vol. 74, nº 4.
pp. 250-255.
Soltani, Fatemeh, Patel, David, Ménard, Michaël, Plant, David V. et Kirk, Andrew G..
2019.
« DPSK Modulation with a Dual-Drive Silicon Photonic Loop-Mirror Modulator ».
IEEE Photonics Technology Letters, vol. 31, nº 13.
pp. 1037-1040.
Soltani, Sara, Chauvette, Sylvain, Bukhtiyarova, Olga, Lina, Jean-Marc, Dubé, Jonathan, Seigneur, Josée, Carrier, Julie et Timofeev, Igor.
2019.
« Sleep-wake cycle in young and older mice ».
Frontiers in Systems Neuroscience, vol. 13.
Soltanian, Abbas, Naboulsi, Diala, Glitho, Roch et Elbiaze, Halima.
2019.
« Resource allocation mechanism for media handling services in cloud multimedia conferencing ».
IEEE Journal on Selected Areas in Communications, vol. 37, nº 5.
pp. 1167-1181.
Somers, Lauren D., McKenzie, Jeffrey M., Mark, Bryan G., Lagos, Pablo, Gene-Hua, Crystal Ng., Wickert, Andrew D., Yarleque, Christian, Baraër, Michel et Sylva, Yamina.
2019.
« Groundwater buffers decreasing glacier melt in an Andean watershed : but not forever ».
Geophysical Research Letters, vol. 46, nº 22.
pp. 13016-13026.
Souza, Mariana A., Cavalcanti, George D. C., Cruz, Rafael M. O. et Sabourin, Robert.
2019.
« Online local pool generation for dynamic classifier selection ».
Pattern Recognition, vol. 85.
pp. 132-148.
Sow, Abdoulaye, Mehrtash, Mostafa, Rousse, Daniel R. et Haillot, Didier.
2019.
« Economic analysis of residential solar photovoltaic electricity production in Canada ».
Sustainable Energy Technologies and Assessments, vol. 33.
pp. 83-94.
Speidel, Leo, Forest, Marie, Shi, Sinan et Myers, Simon R..
2019.
« A method for genome-wide genealogy estimation for thousands of samples ».
Nature Genetics, vol. 51, nº 9.
pp. 1321-1329.
Stepanenko, Oleksandr, Bonev, Ilian A. et Zlatanov, Dimiter.
2019.
« A new 4-DOF fully parallel robot with decoupled rotation for five-axis micromachining applications ».
Journal of Mechanisms and Robotics, vol. 11, nº 3.
Sterba, Manon, Aubin, Carl-Éric, Wagnac, Eric, Fradet, Leo et Arnoux, Pierre-Jean.
2019.
« Effect of impact velocity and ligament mechanical properties on lumbar spine injuries in posterior-anterior impact loading conditions: a finite element study ».
Medical & Biological Engineering & Computing, vol. 57, nº 6.
1381–1392.
St-Onge, David, Côté-Allard, Ulysse, Glette, Kyrre, Gosselin, Benoit et Beltrame, Giovanni.
2019.
« Engaging with robotic swarms: commands from expressive motion ».
ACM Transactions on Human-Robot Interaction (THRI), vol. 8, nº 2.
St-Onge, David, Levillain, Florent, Zibetti, Elisabetta et Beltrame, Giovanni.
2019.
« Collective expression: how robotic swarms convey information with group motion ».
Paladyn, Journal of Behavioral Robotics, vol. 10, nº 1.
pp. 418-435.
Sun, Binhan, Ma, Yan, Vanderesse, Nicolas, Varanasi, Rama Srinivas, Song, Wenwen, Bocher, Philippe, Ponge, Dirk et Raabe, Dierk.
2019.
« Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: role of the austenite-ferrite interface ».
Acta Materialia, vol. 178.
pp. 10-25.
Sun, David, Athienitis, Andreas et D'Avignon, Katherine.
2019.
« Application of semitransparent photovoltaics in transportation infrastructure for energy savings and solar electricity production: Toward novel net‐zero energy tunnel design ».
Progress in Photovoltaics: Research and Applications, vol. 27, nº 11.
pp. 1034-1044.
Sun, Xiaoguang, Houssin, Rémy, Renaud, Jean et Gardoni, Mickaël.
2019.
« A review of methodologies for integrating human factors and ergonomics in engineering design ».
International Journal of Production Research, vol. 57, nº 15-16.
pp. 4961-4976.
Tabaie, Seyedmohammad, Shahriari, Davood, Plouze, Cléa, Devaux, Alexandre, Cormier, Jonathan et Jahazi, Mohammad.
2019.
« Hot ductility behavior of AD730™ nickel-base superalloy ».
Materials Science and Engineering A, vol. 766.
Tang, Meng, Marin, Dmitrii, Ben Ayed, Ismail et Boykov, Yuri.
2019.
« Kernel cuts: Kernel and spectral clustering meet regularization ».
International Journal of Computer Vision, vol. 127, nº 5.
pp. 477-511.
Tang, Tao, Hong, Tao, Hong, Haohui, Ji, Senyuan, Mumtaz, Shahid et Cheriet, Mohamed.
2019.
« An improved UAV-PHD filter-based trajectory tracking algorithm for multi-UAVs in future 5G IoT scenarios ».
Electronics, vol. 8, nº 10.
Tawfik, Hani H., Allidina, Karim, Nabki, Frederic et El-Gamal, Mourad N..
2019.
« Dual-level capacitive micromachined uncooled thermal detector ».
Sensors, vol. 19, nº 24.
Tawfik, Hani H., Alsaiary, Tariq, Elsayed, Mohannad Y., Nabki, Frederic et El-Gamal, Mourad N..
2019.
« Reduced-gap CMUT implementation in PolyMUMPs for air-coupled and underwater applications ».
Sensors and Actuators, A: Physical, vol. 294.
pp. 102-115.
Tebaldi, Gabriele, Dave, Eshan, Cannone Falchetto, Augusto, Hugener, Martin, Perraton, Daniel, Grilli, Andrea, Lo Presti, Davide, Pasetto, Marco, Loizos, Andreas, Jenkins, Kim, Apeagyei, Alex, Grenfell, James et Bocci, Maurizio.
2019.
« Recommendation of RILEM TC237-SIB on fragmentation test for recycled asphalt ».
Materials and Structures/Matériaux et Constructions, vol. 52, nº 4.
Terrier, Philippe, Glaus, Mathias et Raufflet, Emmanuel.
2019.
« BiomiMETRIC assistance tool: A quantitative performance tool for biomimetic design ».
Biomimetics, vol. 4, nº 3.
Thamsuwan, Ornwipa, Galvin, Kit, Tchong-French, Maria, Kim, Jeong Ho et Johnson, Peter W..
2019.
« A feasibility study comparing objective and subjective field-based physical exposure measurements during apple harvesting with ladders and mobile platforms ».
Journal of Agromedicine, vol. 24, nº 3.
pp. 268-278.
Thon, Aurélien et Bélanger, Pierre.
2019.
« EMAT design for minimum remnant thickness gauging using high order shear horizontal modes ».
Ultrasonics, vol. 95.
pp. 70-78.
Timercan, Anatolie, Brailovski, Vladimir, Petit, Yvan, Lussier, Bertrand et Seguin, Bernard.
2019.
« Personalized 3D-printed endoprostheses for limb sparing in dogs: modeling and in vitro testing ».
Medical Engineering and Physics, vol. 71.
pp. 17-29.
Tlili, Ghada, Yahyaoui, Haythem, Zhani, Mohamed Faten et Elbiaze, Halima.
2019.
« DAReSch: deadline-aware request scheduling for cloud storage services ».
Annals of Telecommunications, vol. 74, nº 9-10.
pp. 545-557.
Tmenova, Oleksandra, Martin, Rémi et Duong, Luc.
2019.
« CycleGAN for style transfer in X-ray angiography ».
International Journal of Computer Assisted Radiology and Surgery, vol. 14, nº 10.
pp. 1785-1794.
Toledano, A., Morency, F., Weiss, J., Broughton, C. et Benmeddour, A..
2019.
« Improvement of wall-corrections at the national research council's trisonic wind tunnel ».
Journal of Aircraft, vol. 56, nº 6.
pp. 2299-2308.
Touahir, Kamel, Bilek, Ali, Bocher, Philippe et Beldi, Mustapha.
2019.
« Experimental and numerical analysis of the fields of the frozen stresses in an epoxy sphere using the stress-freezing method and mechanical slicing ».
Journal of Materials and Engineering Structures, vol. 6, nº 2.
Touazine, Heithem, Chadha, Kanwal, Jahazi, Mohammad et Bocher, Philippe.
2019.
« Characterization of subsurface microstructural alterations induced by hard turning of Inconel 718 ».
Journal of Materials Engineering and Performance, vol. 28, nº 11.
pp. 7016-7024.
Tout, Hanine, Kara, Nadja, Talhi, Chamseddine et Mourad, Azzam.
2019.
« Proactive machine learning-based solution for advanced manageability of multi-persona mobile computing ».
Computers and Electrical Engineering, vol. 80.
Tout, Hanine, Talhi, Chamseddine, Kara, Nadja et Mourad, Azzam.
2019.
« Selective mobile cloud offloading to augment multi-persona performance and viability ».
IEEE Transactions on Cloud Computing, vol. 7, nº 2.
pp. 314-328.
Tran, Ha-Vu et Kaddoum, Georges.
2019.
« Robust design of AC computing-enabled receiver architecture for SWIPT networks ».
IEEE Wireless Communications Letters, vol. 8, nº 3.
pp. 801-804.
Tran, Ha-Vu, Kaddoum, Georges, Diamantoulakis, Panagiotis D., Abou-Rjeily, Chadi et Karagiannidis, George K..
2019.
« Ultra-small cell networks with collaborative RF and lightwave power transfer ».
IEEE Transactions on Communications, vol. 67, nº 9.
pp. 6243-6255.
Tran, Ngoc Hai, Le, Cung et Ngo, Anh Dung.
2019.
« An investigation on speed control of a spindle cluster driven by hydraulic motor: application to metal cutting machines ».
International Journal of Rotating Machinery, vol. 2019.
Trochu, Julien, Chaabane, Amin et Ouhimmou, Mustapha.
2019.
« A two-stage stochastic optimization model for reverse logistics network design under dynamic suppliers' locations ».
Waste Management, vol. 95.
pp. 569-583.
Tuck, L., Samson, C., Polowick, C. et Laliberté, J..
2019.
« Real-time compensation of magnetic data acquired by a single-rotor unmanned aircraft system ».
Geophysical Prospecting, vol. 67, nº 6.
pp. 1637-1651.
Uh Zapata, Miguel, Zhang, Wei, Pham Van Bang, Damien et Nguyen, Kim Dan.
2019.
« A parallel second-order unstructured finite volume method for 3D free-surface flows using a σ coordinate ».
Computers and Fluids, vol. 190.
pp. 15-29.
Vaillancourt, Kathleen, Bahn, Olivier et Levasseur, Annie.
2019.
« The role of bioenergy in low-carbon energy transition scenarios: A case study for Quebec (Canada) ».
Renewable and Sustainable Energy Reviews, vol. 102.
pp. 24-34.
Valentin, Olivier, Ducharme, Mikaël, Crétot-Richert, Gabrielle, Monsarrat-Chanon, Hami, Viallet, Guilhem, Delnavaz, Aidin et Voix, Jérémie.
2019.
« Validation and benchmarking of a wearable EEG acquisition platform for real-world applications ».
IEEE Transactions on Biomedical Circuits and Systems, vol. 13, nº 1.
pp. 103-111.
Valentin, Olivier, Vij, Saumya et Voix, Jeremie.
2019.
« Development of a real-time EOG-based acoustical beamformer algorithm for binaural hearing devices ».
Canadian Acoustics - Acoustique Canadienne, vol. 47, nº 2.
pp. 41-48.
Van der Maren, S., Duclos, C., Dumont, M., Blais, H., Daoust, J., Lina, J. M., Bernard, F., Menon, D. K., Carrier, J. et Gosselin, N..
2019.
« Sleep-wake cycle recovery after moderate to severe traumatic brain injury: Are ultradian rhythms involved? ».
[Résumé d'une communication à une conférence]. Sleep Medicine, vol. 64.
S398.
Vaquero, Luis M., Cuadrado, Felix, Elkhatib, Yehia, Bernal-Bernabe, Jorge, Srirama, Satish N. et Zhani, Mohamed Faten.
2019.
« Research challenges in nextgen service orchestration ».
Future Generation Computer Systems, vol. 90.
pp. 20-38.
Varghese, Blesson, Leitner, Philipp, Ray, Suprio, Chard, Kyle, Barker, Adam, Elkhatib, Yehia, Herry, Herry, Hong, Cheol-Ho, Singer, Jeremy, Tso, Fung Po, Yoneki, Eiko et Zhani, Mohamed-Faten.
2019.
« Cloud futurology ».
Computer, vol. 52, nº 9.
pp. 68-77.
Vázquez Romaguera, Liset, Olofsson, Nils, Plantefève, Rosalie, Lugez, Elodie, De Guise, Jacques et Kadoury, Samuel.
2019.
« Automatic self-gated 4D-MRI construction from free-breathing 2D acquisitions applied on liver images ».
International Journal of Computer Assisted Radiology and Surgery, vol. 14, nº 6.
pp. 933-944.
Vejdani, Parisa et Nabki, Frederic.
2019.
« Dual-path and dual-chopper amplifier signal conditioning circuit with improved SNR and ultra-low power consumption for MEMS ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 66, nº 6.
pp. 2253-2262.
Vibert, N., Gruson, A., Stokholm, H., Mortensen, T., Jarosz, W., Hachisuka, T. et Nowrouzezahrai, D..
2019.
« Scalable virtual ray lights rendering for participating media ».
Computer Graphics Forum, vol. 38, nº 4.
pp. 57-65.
Vinches, Ludwig, Tuduri, Ludovic et Hallé, Stéphane.
2019.
« Modeling airborne nanoparticle filtration through a complete structure of non-woven material used in protective apparel ».
Textile Research Journal, vol. 89, nº 15.
pp. 3024-3033.
Voix, Jeremie.
2019.
« Hearing protectors fit-testing using smartphones: Preliminary data ».
[Article de conférence]. Canadian Acoustics - Acoustique Canadienne, vol. 47, nº 3.
pp. 22-23.
Voix, Jérémie, Sgard, Franck et Dabin-Voix, Nathalie.
2019.
« The 26th international congress on sound and vibration: Behind the scene = Le 26eme International Congress on Sound and Vibration: Derriere la scene ».
Canadian Acoustics = Acoustique Canadienne, vol. 47, nº 4.
pp. 35-46.
Vriesman, Daniel, Britto, Alceu S., Zimmer, Alessandro, Koerich, Alessandro L. et Paludo, Rodrigo.
2019.
« Automatic visual inspection of thermoelectric metal pipes ».
Signal, Image and Video Processing, vol. 13, nº 5.
pp. 975-983.
Vu, Ngoc-Hung, Pham, Xuan-Tan, Francois, Vincent et Cuillière, Jean-Christophe.
2019.
« Characterization of multilayered carbon-fiber-reinforced thermoplastic composites for assembly process ».
Journal of Thermoplastic Composite Materials, vol. 32, nº 5.
pp. 673-689.
Vu, Ngoc-Hung, Pham, Xuan-Tan, François, Vincent et Cuillière, Jean-Christophe.
2019.
« Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process ».
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 233, nº 17.
pp. 6167-6176.
Wagnac, Eric, Mac-Thiong, Jean-Marc, Arnoux, Pierre-Jean, Desrosiers, Jean-Michel, Ménard, Anne-Laure et Petit, Yvan.
2019.
« Traumatic spinal cord injuries with fractures in a Québec level I trauma center ».
The Canadian journal of neurological sciences, vol. 46, nº 6.
pp. 727-734.
Wahab, Omar Abdel, Kara, Nadjia, Edstrom, Claes et Lemieux, Yves.
2019.
« MAPLE: a machine learning approach for efficient placement and adjustment of virtual network functions ».
Journal of Network and Computer Applications, vol. 142.
pp. 37-50.
Walzberg, Julien, Dandres, Thomas, Merveille, Nicolas, Cheriet, Mohamed et Samson, Réjean.
2019.
« Accounting for fluctuating demand in the life cycle assessments of residential electricity consumption and demand-side management strategies ».
Journal of Cleaner Production, vol. 240.
Walzberg, Julien, Dandres, Thomas, Merveille, Nicolas, Cheriet, Mohamed et Samson, Réjean.
2019.
« Assessing behavioural change with agent-based life cycle assessment: application to smart homes ».
Renewable and Sustainable Energy Reviews, vol. 111.
pp. 365-376.
Wang, Kunqi, Du, Lei, Wei, Qiliang, Zhang, Jihai, Zhang, Gaixia, Xing, Wei et Sun, Shuhui.
2019.
« A lactate/oxygen biofuel cell: The coupled lactate oxidase anode and pgm-free Fe-N-C cathode ».
ACS Applied Materials and Interfaces, vol. 11, nº 45.
pp. 42744-42750.
Wang, Li, Nie, Dong, Guannan, Li, Puybareau, Élodie, Dolz, Jose, Zhang, Qian, Wang, Fan, Xia, Jing, Wu, Zhengwang, Chen, Jia-Wei, Thung, Kim-Han, Bui, Toan Duc, Shin, Jitae, Zeng, Guodong, Zheng, Guoyan, Fonov, Vladimir S., Doyle, Andrew, Xu, Yongchao, Moeskops, Pim, Pluim, Josien P. W., Desrosiers, Christian, Ben Ayed, Ismail, Sanroma, Gerard, Benkarim, Oualid M., Casamitjana, Adrià, Vilaplana, Verónica, Lin, Weili, Li, Gang et Shen, Dinggang.
2019.
« Benchmark on automatic six-month-old infant brain segmentation algorithms: the iSeg-2017 challenge ».
IEEE Transactions on Medical Imaging, vol. 38, nº 9.
pp. 2219-2230.
Wang, Qingsong, Zhang, Xiaodong et Niu, Shuangxia.
2019.
« Design of dual-electrical-port DC-coil-free hybrid-excited machines ».
IEEE Transactions on Energy Conversion, vol. 34, nº 3.
pp. 1328-1336.
Warner, Cael, McDermid, Cameron M., Ahmadi, Ali et Markley, Loïc.
2019.
« Impact of electrode design and voltage waveform on low-potential magnetohydrodynamic fluid actuation ».
Microfluidics and Nanofluidics, vol. 23, nº 7.
Wei, Qiliang, Cherif, Mohamed, Zhang, Gaixia, Almesrati, Ali, Chen, Jiatang, Wu, Mingjie, Komba, Nathanael, Hu, Yongfeng, Regier, Tom, Sham, Tsun-Kong, Vidal, François et Sun, Shuhui.
2019.
« Transforming reed waste into a highly active metal-free catalyst for oxygen reduction reaction ».
Nano Energy, vol. 62.
pp. 700-708.
Wei, Qiliang, Fu, Yanqing, Zhang, Gaixia, Yang, Dachi, Meng, Guowen et Sun, Shuhui.
2019.
« Rational design of novel nanostructured arrays based on porous AAO templates for electrochemical energy storage and conversion ».
Nano Energy, vol. 55.
pp. 234-259.
Wigmore, Oliver, Mark, Bryan, McKenzie, Jeffrey, Baraer, Michel et Lautz, Laura.
2019.
« Sub-metre mapping of surface soil moisture in proglacial valleys of the tropical Andes using a multispectral unmanned aerial vehicle ».
Remote Sensing of Environment, vol. 222.
pp. 104-118.
Wingert, Loïc, Cloutier, Yves, Hallé, Stéphane, Bahloul, Ali, Tessier, Dominic, Giraudel, Jean-Luc, Dolez, Patricia et Tuduri, Ludovic.
2019.
« Filtering performances of 20 protective fabrics against solid aerosols ».
Journal of Occupational and Environmental Hygiene, vol. 16, nº 8.
pp. 592-606.
Woodward, Lyne et Tartakovsky, Boris.
2019.
« A simple power management circuit for microbial fuel cell operation with intermittent electrical load connection ».
Canadian Journal of Chemical Engineering, vol. 97, nº 1.
pp. 93-98.
Wu, Mingjie, Zhang, Gaixia, Qiao, Jinlin, Chen, Ning, Chen, Weifeng et Sun, Shuhui.
2019.
« Ultra-long life rechargeable zinc-air battery based on high-performance trimetallic nitride and NCNT hybrid bifunctional electrocatalysts ».
Nano Energy, vol. 61.
pp. 86-95.
Wu, Mingjie, Zhang, Gaixia, Wu, Minghao, Prakash, Jai et Sun, Shuhui.
2019.
« Rational design of multifunctional air electrodes for rechargeable Zn–Air batteries: Recent progress and future perspectives ».
Energy Storage Materials, vol. 21.
pp. 253-286.
Wuthrich, Rolf et Hof, Lucas A..
2019.
« Low batch size production of glass products requiring micrometer precision ».
[Article de conférence]. IFAC-PapersOnLine, vol. 52, nº 10.
pp. 319-322.
Xia, Y., Zhang, H., Sun, Y., Sun, L., Xu, F., Sun, S., Zhang, G., Huang, P., Du, Y., Wang, J., Verevkin, S. P. et Pimerzin, A. A..
2019.
« Dehybridization effect in improved dehydrogenation of LiAlH4 by doping with two-dimensional Ti3C2 ».
Materials Today Nano, vol. 8.
Xing, Kanglin, Rimpault, Xavier, Mayer, J. R. R., Chatelain, Jean-François et Achiche, Sofiane.
2019.
« Five-axis machine tool fault monitoring using volumetric errors fractal analysis ».
CIRP Annals, vol. 68, nº 1.
pp. 555-558.
Xu, Xiaopan, Zhang, Xi, Tian, Qian, Wang, Huanjun, Cui, Long-Biao, Li, Shurong, Tang, Xing, Li, Baojun, Dolz, Jose, Ben Ayed, Ismail, Liang, Zhengrong, Yuan, Jing, Du, Peng, Lu, Hongbing et Liu, Yang.
2019.
« Quantitative identification of nonmuscle-invasive and muscle-invasive bladder carcinomas: a multiparametric MRI radiomics analysis ».
Journal of Magnetic Resonance Imaging, vol. 49, nº 5.
pp. 1489-1498.
Yakhya, Saleh, Ernez, Sami et Morency, François.
2019.
« Computational fluid dynamics investigation of transient effects of aircraft ground deicing jets ».
Journal of Thermophysics and Heat Transfer, vol. 33, nº 1.
pp. 117-127.
Yan, C., Rousse, D. et Glaus, Mathias.
2019.
« Multi-criteria decision analysis ranking alternative heating systems for remote communities in Nunavik ».
Journal of Cleaner Production, vol. 208.
pp. 1488-1497.
Yang, Helin, Xie, Xianzhong et Kadoch, Michel.
2019.
« Intelligent resource management based on reinforcement learning for ultra-reliable and low-latency IoV communication networks ».
IEEE Transactions on Vehicular Technology, vol. 68, nº 5.
pp. 4157-4169.
Yang, Xiaohua, Zhang, Gaixia, Prakash, Jai, Chen, Zhangsen, Gauthier, Marc et Sun, Shuhui.
2019.
« Chemical vapour deposition of graphene: Layer control, the transfer process, characterisation, and related applications ».
International Reviews in Physical Chemistry, vol. 38, nº 2.
pp. 149-199.
Yassin, Mohamed, Talhi, Chamseddine et Boucheneb, Hanifa.
2019.
« ITADP: an inter-tenant attack detection and prevention framework for multi-tenant SaaS ».
Journal of Information Security and Applications, vol. 49.
pp. 94-108.
Yüksel, Dilara, Smith, Ellen, Lim, Yun Qi, Goldstone, Aimee, Claudatos, Stephanie, Forouzanfar, Mohamad, Alschuler, Vanessa, Gil, Maureen, Colrain, Ian M., Prouty, Devin, Zambotti, Massimiliano de et Baker, Fiona.
2019.
« 0112 First night effect on sleep and heart rate in adolescent boys and girls: Findings from the NCANDA study ».
[Résumé d'une communication à une conférence]. Sleep, vol. 42, nº Suppl. 1.
A46.
Zaag, Mahdi, Botez, Ruxandra Mihaela et Wong, Tony.
2019.
« CESSNA citation X engine model identification using neural networks and extended great deluge algorithms ».
INCAS Bulletin, vol. 11, nº 2.
pp. 195-207.
Zambrano, J., Landry, R. Jr. et Yeste-Ojeda, O. A..
2019.
« Simulation/optimization modeling for robust satellite data unit for airborne network ».
Journal of Air Transportation, vol. 27, nº 1.
pp. 39-50.
Zarour, Djamal, Thomas, Marc et Meziani, Salim.
2019.
« Diagnosis of bearing defects by variational modes decomposition from vibratory and acoustic emission measurements ».
International Journal of Vehicle Noise and Vibration, vol. 15, nº 1.
pp. 21-41.
Zeidan, Elie, Assad, Anis, Letourneau Guillon, Laurent, Belanger, Karl, Lemieux Blanchard, Emilie, Lemieux, Bernard, Bahary, Jean-Paul, Roberge, David, G Masucci, Laura, Menard, Cynthia, Lambert, Carole, Moumdjian, Robert, Berthelet, France, Ben-Abdallah, Meriem, De Guise, Jacques et Florescu, Marie.
2019.
« HOUT-14. Prognostic impact of first pseudoprogression on MRI in glioblastoma, an 11 years experience from a Canadian university center ».
[Résumé d'une communication à une conférence]. Neuro-Oncology, vol. 21, nº Suppl. 6.
vi114-vi115.
Zemzem, Mohamed, Vinches, Ludwig et Hallé, Stephané.
2019.
« Influence of processing parameters on barrier properties of nitrile rubber/nanoclay nanocomposite membrane against organic solvent ».
Journal of Polymer Research, vol. 26, nº 3.
Zhalehpour, Sara, Arabnejad, Ehsan, Wellmon, Chad, Piper, Andrew et Cheriet, Mohamed.
2019.
« Visual information retrieval from historical document images ».
Journal of Cultural Heritage, vol. 40.
pp. 99-112.
Zhang, C., Sanjose, M. et Moreau, S..
2019.
« Aeolian noise of a cylinder in the critical regime ».
The Journal of the Acoustical Society of America, vol. 146, nº 2.
pp. 1404-1415.
Zhang, Chaofan, Moreau, Stéphane et Sanjosé, Marlène.
2019.
« Turbulent flow and noise sources on a circular cylinder in the critical regime ».
AIP Advances, vol. 9, nº 8.
Zhang, Gaixia, Yang, Xiaohua, Dubois, Marc, Herraiz, Michael, Chenitz, Régis, Lefèvre, Michel, Cherif, Mohamed, Vidal, François, Glibin, Vassili P., Sun, Shuhui et Dodelet, Jean-Pol.
2019.
« Non-PGM electrocatalysts for PEM fuel cells: Effect of fluorination on the activity and stability of a highly active NC-Ar + NH3 catalyst ».
Energy and Environmental Science, vol. 12, nº 10.
pp. 3015-3037.
Zhang, Jihai, Feng, Jin, Jia, Liyang, Zhang, Huiyuan, Zhang, Gaixia, Sun, Shuhui et Zhou, Tao.
2019.
« Laser-induced selective metallization on polymer substrates using organocopper for portable electronics ».
ACS Applied Materials and Interfaces, vol. 11, nº 14.
pp. 13714-13723.
Zhang, Mingli et Desrosiers, Christian.
2019.
« High-quality image restoration using low-rank patch regularization and global structure sparsity ».
IEEE Transactions on Image Processing, vol. 28, nº 2.
pp. 868-879.
Zhou, Fanqin, Li, Wenjing, Meng, Luoming et Kadoch, Michel.
2019.
« Capacity enhancement for hotspot area in 5G cellular networks using mmWave aerial base station ».
IEEE Wireless Communications Letters, vol. 8, nº 3.
pp. 677-680.
Zhukova, Yulia, Korobkova, Anastasia, Dubinskiy, Sergey, Pustov, Yury, Konopatsky, Anton, Podgorny, Dmitry, Filonov, Mikhail, Prokoshkin, Sergey et Brailovski, Vladimir.
2019.
« The electrochemical and mechanical behavior of bulk and porous superelastic Ti-Zr-based alloys for biomedical applications ».
Materials, vol. 12, nº 15.
Zhuldybina, Mariia, Ropagnol, Xavier, Trudeau, Charles, Bolduc, Martin, Zednik, Ricardo J. et Blanchard, François.
2019.
« Contactless in situ electrical characterization method of printed electronic devices with terahertz spectroscopy ».
Sensors, vol. 19, nº 3.
Ziabakhsh, Soheyl, Gagnon, Ghyslain et Roberts, Gordon W..
2019.
« A second-order bandpass ΔΣ time-to-digital converter with negative time-mode feedback ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 66, nº 4.
pp. 1355-1368.
Zongo, Floriane, Tahan, Antoine et Brailovski, Vladimir.
2019.
« Scale, material concentration, stress relief and part removal effects on the dimensional behaviour of selected AlSi10Mg components manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 2.
|
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau