| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Document quand le type de document est "Article publié dans une revue, révisé par les pairs" et l'année est 2018Nombre de documents archivés : 617.
Abari, Ibtissem, Lahouar, Ali, Hamouda, Mahmoud, Ben Hadj Slama, Jaleleddine et Al-Haddad, Kamal.
2018.
« Fault detection methods for three-level NPC inverter based on DC bus electromagnetic signatures ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 7.
pp. 5224-5236.
Abdolmanafi, Atefeh, Duong, Luc, Dahdah, Nagib, Adib, Ibrahim Ragui et Cheriet, Farida.
2018.
« Characterization of coronary artery pathological formations from OCT imaging using deep learning ».
Biomedical Optics Express, vol. 9, nº 10.
pp. 4936-4960.
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2018.
« Tool condition monitoring using spectral subtraction algorithm and artificial intelligence methods in milling process ».
International Journal of Mechanical Engineering and Robotics Research, vol. 7, nº 1.
pp. 30-34.
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2018.
« Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 9-12.
pp. 3217-3227.
Agnard, Stéphane, Hazel, Bruce et Liu, Zhaoheng.
2018.
« Study of grinding tool profiling for robotic processes ».
Machining Science and Technology, vol. 22, nº 2.
pp. 203-224.
Ahmad, Ola, Lombaert, Herve, Parent, Stefan, Labelle, Hubert et Cheriet, Farida.
2018.
« Spectral shape analysis of human torsos: Application to the evaluation of scoliosis surgery outcome ».
IEEE Journal of Biomedical and Health Informatics, vol. 22, nº 5.
pp. 1552-1560.
Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane.
2018.
« Experimental investigation of the cooling capacity of gaseous carbon dioxide in free jet expansion for use in portable air-cooling systems ».
Open Journal of Applied Sciences, vol. 8, nº 2.
pp. 62-72.
Alam, Md Sahabul, Kaddoum, Georges et Agba, Basile L..
2018.
« Bayesian MMSE estimation of a gaussian source in the presence of bursty impulsive noise ».
IEEE Communications Letters, vol. 22, nº 9.
pp. 1846-1849.
Alam, Md Sahabul, Kaddoum, Georges et Agba, Basile L..
2018.
« Performance analysis of distributed wireless sensor networks for gaussian source estimation in the presence of impulsive noise ».
IEEE Signal Processing Letters, vol. 25, nº 6.
pp. 803-807.
Alameh, Abdul Hafiz, Gratuze, Mathieu, Elsayed, Mohannad Y. et Nabki, Frederic.
2018.
« Effects of proof mass geometry on piezoelectric vibration energy harvesters ».
Sensors, vol. 18, nº 5.
Alavi, Seyyed Hossein et Jabbarzadeh, Armin.
2018.
« Supply chain network design using trade credit and bank credit: A robust optimization model with real world application ».
Computers and Industrial Engineering, vol. 125.
pp. 69-86.
Ali, Ahmed H., Mohamed, Hamdy M., Chaallal, Omar, Benmokrane, Brahim et Ghrib, Faouzi.
2018.
« Shear resistance of RC circular members with FRP discrete hoops versus spirals ».
Engineering Structures, vol. 174.
pp. 688-700.
Alinejad, Yasaman, Adoungotchodo, Atma, Hui, Eve, Zehtabi, Fatemeh et Lerouge, Sophie.
2018.
« An injectable chitosan/chondroitin sulfate hydrogel with tunable mechanical properties for cell therapy/tissue engineering ».
International Journal of Biological Macromolecules, vol. 113.
pp. 132-141.
Almeida, Francisco, Assuncao, Marcos D., Barbosa, Jorge, Blanco, Vicente, Brandic, Ivona, Da Costa, Georges, Dolz, Manuel F., Elster, Anne C., Jarus, Mateusz, Karatza, Helen D., Lefevre, Laurent, Mavridis, Ilias, Oleksiak, Ariel, Orgerie, Anne-Cecile et Pierson, Jean-Marc.
2018.
« Energy monitoring as an essential building block towards sustainable ultrascale systems ».
Sustainable Computing: Informatics and Systems, vol. 17.
pp. 27-42.
Almeida, Paulo R. L., Oliveira, Luiz S., Britto, Alceu S. et Sabourin, Robert.
2018.
« Adapting dynamic classifier selection for concept drift ».
Expert Systems with Applications, vol. 104.
pp. 67-85.
Alomari, A., April, A., Monsalve, C. et Gawanmeh, A..
2018.
« Integrating a decision tree perspective at the operational level of BPM+ ».
Computer Systems Science and Engineering, vol. 33, nº 3.
pp. 219-227.
Amabili, Marco, Balasubramanian, Prabakaran, Breslavsky, Ivan D., Ferrari, Giovanni et Tubaldi, Eleonora.
2018.
« Viscoelastic characterization of woven Dacron for aortic grafts by using direction-dependent quasi-linear viscoelasticity ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 82.
pp. 282-290.
Amadou, Mamane M. D., Mehrjerdi, Hasan, Saad, Maarouf et Asber, Dalal.
2018.
« Improving participation of doubly fed induction generator in frequency regulation in an isolated power system ».
International Journal of Electrical Power and Energy Systems, vol. 100.
pp. 550-558.
Ameyed, Darine, Miraoui, Moeiz, Zaguia, Atef, Jaafar, Fehmi et Tadj, Chakib.
2018.
« Using probabilistic temporal logic PCTL and model checking for context prediction ».
Computing and Informatics, vol. 37, nº 6.
pp. 1411-1442.
Andrianarison, Maherizo et Landry, René Jr..
2018.
« New approach of high sensitivity techniques using collective detection method with multiple GNSS receivers ».
Sensors, vol. 18, nº 11.
Anh, Tung Tran, Fréchette, Michel, David, Éric, Veillette, René et Moraille, Patricia.
2018.
« Effect of POSS-grafted titanium dioxide on the electrical and thermal properties of LDPE/TiO2 polymer nanocomposite ».
Journal of Applied Polymer Science, vol. 135, nº 14.
Aranas, Clodualdo Jr., Rodrigues, Samuel, Fall, Ameth, Jahazi, Mohammad et Jonas, John.
2018.
« Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ».
Metals, vol. 8, nº 5.
Arango-Miranda, Raúl, Hausler, Robert, Romero-López, Rabindranarth, Glaus, Mathias et Ibarra-Zavaleta, Sara.
2018.
« An overview of energy and exergy analysis to the industrial sector, a contribution to sustainability ».
Sustainability, vol. 10, nº 1.
Arango-Miranda, Raul, Hausler, Robert, Romero-Lopez, Rabindranarth, Glaus, Mathias et Ibarra-Zavaleta, Sara P..
2018.
« Carbon dioxide emissions, energy consumption and economic growth: A comparative empirical study of selected developed and developing countries. “The role of exergy” ».
Energies, vol. 11, nº 10.
Arsenault, Richard, Brissette, François et Martel, Jean-Luc.
2018.
« The hazards of split-sample validation in hydrological model calibration ».
Journal of Hydrology, vol. 566.
pp. 346-362.
Arunachalam, Shivaram, Gupta, Anubha A., Izquierdo, Ricardo et Nabki, Frederic.
2018.
« Suspended carbon nanotubes for humidity sensing ».
Sensors, vol. 18, nº 5.
Asghari, Vahid et Cheriet, Mohamed.
2018.
« Energy and connectivity aware resource optimization of nodes traffic distribution in smart home networks ».
Future Generation Computer Systems, vol. 88.
pp. 559-570.
Asgharzadeh-Karamshahloo, Iraj, Jabbarzadeh, Armin et Shavvalpour, Saeed.
2018.
« Assessing the use of radio frequency identification technologies as an alternative for insurance costs in hospitals ».
Technology and Health Care: Official journal of the European Society for Engineering and Medicine, vol. 26, nº 1.
pp. 81-92.
Assadi, Aymen Amine, Loganathan, Sivachandiran, Nguyen-Tri, Phuong, Gharib-Abou Ghaida, Sara, Bouzaza, Abdelkrim, Nguyen, Tuan Anh et Wolbert, Dominique.
2018.
« Pilot scale degradation of mono and multi volatile organic compounds by surface discharge plasma/TiO2reactor: investigation of competition and synergism ».
Journal of Hazardous Materials, vol. 357.
pp. 305-313.
Asuo, Ivy M., Gedamu, Dawit, Ka, Ibrahima, Gerlein, Luis Felipe, Fortier, Francois-Xavier, Pignolet, Alain, Cloutier, Sylvain G. et Nechache, Riad.
2018.
« High-performance pseudo-halide perovskite nanowire networks for stable and fast-response photodetector ».
Nano Energy, vol. 51.
pp. 324-332.
Aubry-Wake, Caroline, Zéphir, Dorian, Baraer, Michel, McKenzie, Jeffrey M. et Mark, Bryan G..
2018.
« Importance of longwave emissions from adjacent terrain on patterns of tropical glacier melt and recession ».
Journal of Glaciology, vol. 64, nº 243.
pp. 49-60.
Azizi, Sohrab, David, Éric, Fréchette, Michel F., Nguyen-Tri, Phuong et Ouellet-Plamondon, Claudiane M..
2018.
« Electrical and thermal conductivity of ethylene vinyl acetate composite with graphene and carbon black filler ».
Polymer Testing, vol. 72.
pp. 24-31.
Baa Wafaa, Majid et Dessaint, Louis-A..
2018.
« Approach to dynamic voltage stability analysis for DFIG wind parks integration ».
IET Renewable Power Generation, vol. 12, nº 2.
pp. 190-197.
Babahenini, Djihane, Gruson, Adrien, Chaouki Babahenini, Mohamed et Bouatouch, Kadi.
2018.
« Efficient inverse transform methods for VPL selection in global illumination ».
Multimedia Tools and Applications, vol. 77, nº 11.
pp. 13571-13595.
Badarneh, Osamah S., Almehmadi, Fares S. et Kadoch, Michel.
2018.
« Performance analysis of spectrum sharingbased multi-hop decode-and-forward over Nakagami-m fading channels subject to additive white generalised Gaussian noise ».
IET Communications, vol. 12, nº 4.
pp. 415-424.
Badeli, Saeed, Carter, Alan et Doré, Guy.
2018.
« Complex modulus and fatigue analysis of asphalt mix after daily rapid freeze-thaw cycles ».
Journal of Materials in Civil Engineering, vol. 30, nº 4.
Badeli, Saeed, Carter, Alan et Doré, Guy.
2018.
« Effect of laboratory compaction on the viscoelastic characteristics of an asphalt mix before and after rapid freeze-thaw cycles ».
Cold Regions Science and Technology, vol. 146.
pp. 98-109.
Badeli, Saeed, Carter, Alan, Doré, Guy et Saliani, Saeed.
2018.
« Evaluation of the durability and the performance of an asphalt mix involving Aramid Pulp Fiber (APF): Complex modulus before and after freeze-thaw cycles, fatigue, and TSRST tests ».
Construction and Building Materials, vol. 174.
pp. 60-71.
Bahig, Houda, de Guise, Jacques, Vu, Toni, Blais, Danis, Chartrand-Lefebvre, Carl, Nguyen, Nhu Tram, Lavertu, Sophie, Guay, Jean-Pierre, Bedwani, Stephane et Roberge, David.
2018.
« In a heartbeat: an assessment of dynamic dose variation to cardiac structures using dual source computed tomography ».
International Journal of Radiation Oncology*Biology*Physics, vol. 102, nº 4.
pp. 950-959.
Baig, Asim, Al-Ma'adeed, Somaya A. S., Bouridane, Ahmed et Cheriet, Mohamed.
2018.
« Automatic segmentation and reconstruction of historical manuscripts in gradient domain ».
IET Image Processing, vol. 12, nº 4.
pp. 502-512.
Bala, Abdalla et Abran, Alain.
2018.
« Impact analysis of multiple imputation on effort estimation models with the ISBSG repository of software projects ».
Software Measurement News, vol. 23, nº 1.
pp. 17-34.
Balasubramanian, Prabakaran, Ferrari, Giovanni et Amabili, Marco.
2018.
« Identification of the viscoelastic response and nonlinear damping of a rubber plate in nonlinear vibration regime ».
Mechanical Systems and Signal Processing, vol. 111.
pp. 376-398.
Banerjee, Debika, Benavides, Jaime A., Guo, Xiaohang et Cloutier, Sylvain G..
2018.
« Tailored interfaces of the bulk silicon nanowire/TiO2 heterojunction promoting enhanced photovoltaic performances ».
ACS Omega, vol. 3, nº 5.
pp. 5064-5070.
Banerjee, Debika, Guo, Xiaohang et Cloutier, Sylvain G..
2018.
« Plasmon-enhanced silicon nanowire array-based hybrid heterojunction solar cells ».
Solar RRL, vol. 2, nº 7.
Basta, Mohamed, Lapalme, James, Paquet, Marc, Saint-Louis, Patrick et Abu Zwaida, Tarek.
2018.
« How are supply chains addressing their social responsibility dilemmas? Review of the last decade and a half ».
Corporate Social Responsibility and Environmental Management, vol. 25, nº 5.
pp. 833-843.
Bautista Villalpando, Luis Eduardo, Abran, Alain, Ravanello, Anderson et Ramirez, Arturo Elias.
2018.
« A three-dimensional performance measurement model for cloud computing ».
Journal of Software Engineering and Applications, vol. 11, nº 5.
pp. 235-248.
Bavand, R., Chen, L., França, R., Loran, S., Yang, D. Q., Yelon, A., Zhang, G. X. et Sacher, E..
2018.
« Comment on “Intensity modulation of the Shirley background of the Cr3p spectra with photon energies around the Cr2p edge”, by A Herrera-Gomez, D Cabrera-German, A D Dutol et al, Surface Interface Anal, 2018;50:246-252 ».
Surface and Interface Analysis, vol. 50, nº 7.
pp. 683-685.
Bayati, Abdolkhalegh, Nguyen, Kim et Cheriet, Mohamed.
2018.
« Multiple-step-ahead traffic prediction in high-speed networks ».
IEEE Communications Letters, vol. 22, nº 12.
pp. 2447-2450.
Bazrafshan, Amir, Taherzadeh-Sani, Mohammad et Nabki, Frédéric.
2018.
« A 0.8-4-GHz software-defined radio receiver with improved harmonic rejection through non-overlapped clocking ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 65, nº 10.
pp. 3186-3195.
Beaudoin, Yanick, Desbiens, André, Gagnon, Eric et Landry, René Jr..
2018.
« Observability of satellite launcher navigation with INS, GPS, attitude sensors and reference trajectory ».
Acta Astronautica, vol. 142.
pp. 277-288.
Beaudoin, Yanick, Desbiens, André, Gagnon, Eric et Landry, René Jr..
2018.
« Satellite launcher navigation with one versus three IMUs: Sensor positioning and data fusion model analysis ».
Sensors, vol. 18, nº 6.
Beaugendre, H. et Morency, F..
2018.
« Penalization of the Spalart–Allmaras turbulence model without and with a wall function: Methodology for a vortex in cell scheme ».
Computers and Fluids, vol. 170.
pp. 313-323.
Belghait, Fodil et April, Alain.
2018.
« The future of large-scale precision medicine research platforms: preparing the data for analysis ».
International Journal of Trend in Research and Development, nº Special Issue, ICTIMESH-18.
pp. 91-94.
Ben Attia, Maroua, Nguyen, Kim-Khoa et Cheriet, Mohamed.
2018.
« QoS-aware software-defined routing in smart community network ».
Computer Networks, vol. 147.
pp. 221-235.
Ben Fredj, Emna, Ghasemi Nanesa, Hadi, Jahazi, Mohammad et Morin, Jean-Benoit.
2018.
« Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ».
Journal of Iron and Steel Research International, vol. 25, nº 5.
pp. 554-562.
Benacchio, S., Doutres, O., Le Troter, A., Varoquaux, A., Wagnac, E., Callot, V. et Sgard, F..
2018.
« Estimation of the ear canal displacement field due to in-ear device insertion using a registration method on a human-like artificial ear ».
Hearing Research, vol. 365.
pp. 16-27.
Benariba, Aboubakeur, Bouzidane, Ahmed, Thomas, Marc et Guilbault, Raynald.
2018.
« Numerical analysis of a rigid rotor mounted on four-pad hydrostatic squeeze film damper lubricated with micropolar lubricant ».
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 232, nº 5.
pp. 513-524.
Benasla, Amel et Hausler, Robert.
2018.
« Optimisation of growth of raphidocelis subcapitata immobilised for biofuel production: Influence of alginate and CaCl2 concentrations on growth ».
Environments, vol. 5, nº 5.
Benavides, Jaime A., Trudeau, Charles P., Gerlein, Luis F. et Cloutier, Sylvain G..
2018.
« Laser selective photoactivation of amorphous TiO2 films to anatase and/or rutile crystalline phases ».
ACS Applied Energy Materials, vol. 1, nº 8.
pp. 3607-3613.
Benhalima, Seghir, Miloud, Rezkallah et Chandra, Ambrish.
2018.
« Real-time implementation of robust control strategies based on sliding mode control for standalone microgrids supplying non-linear loads ».
Energies, vol. 11, nº 10.
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2018.
« A comparison between aggregation before and after propagation based on a reliability model ».
Information Sciences, vol. 453.
pp. 99-110.
Berger, Maxime, Kocar, Ilhan, Fortin-Blanchette, Handy et Lavertu, Carl.
2018.
« Hybrid average modeling of three-phase dual active bridge converters for stability analysis ».
IEEE Transactions on Power Delivery, vol. 33, nº 4.
pp. 2020-2029.
Berrima, Safa, Blaquière, Yves et Savaria, Yvon.
2018.
« Diagnosis algorithms for a reconfigurable and defect tolerant JTAG scan chain in large area integrated circuits ».
Integration, vol. 62.
pp. 159-169.
Bertrand-Grenier, Antony, Zehtabi, Fatemeh, Lerouge, Sophie, Alturkistani, Husain, Kauffmann, Claude, Bodson-Clermont, Paule, Salazkin, Igor, Héon, Hélène, Cloutier, Guy et Soulez, Gilles.
2018.
« Shear wave elasticity imaging for residual endoleak and thrombus characterisation after endoleak embolisation following endovascular aneurysm repair: a canine animal study ».
European Radiology Experimental, vol. 2.
Bitterlin, Matthieu, Shahriari, Davood, Lapierre-Boire, Louis-Philippe, Morin, Jean-Benoît et Jahazi, Mohammad.
2018.
« Hot deformation behavior of a nickel-modified AISI 4330 steel ».
ISIJ International, vol. 58, nº 9.
pp. 1711-1720.
Blanchard, François, Chai, Xin, Tanaka, Tomoko, Arikawa, Takashi, Ozaki, Tsuneyuki, Morandotti, Roberto et Tanaka, Koichiro.
2018.
« Terahertz microscopy assisted by semiconductor nonlinearities ».
Optics Letters, vol. 43, nº 20.
pp. 4997-5000.
Blancke, Olivier, Combette, Amélie, Amyot, Normand, Komljenovic, Dragan, Lévesque, Mélanie, Hudon, Claude, Tahan, Antoine et Zerhouni, Noureddine.
2018.
« A predictive maintenance approach for complex equipment based on petri net failure mechanism propagation model ».
Proceedings of the European Conference of the PHM Society, vol. 4, nº 1.
Blancke, Olivier, Tahan, Antoine, Komljenovic, Dragan, Amyot, Normand, Lévesque, Mélanie et Hudon, Claude.
2018.
« A holistic multi-failure mode prognosis approach for complex equipment ».
Reliability Engineering and System Safety, vol. 180.
pp. 136-151.
Blangy, Sylvie, Bernier, Monique, Bhiry, Najat, Jean-Pierre, Dedieu, Aenishaenslin, Cécile, Bastian, Suzanne, Chanteloup, Laine, Coxam, Véronique, Decaulne, Armelle, Gérin-Lajoie, José, Gibout, Stéphane, Haillot, Didier, Hébert-Houle, Emilie, Herrmann, Thora Martina, Joliet, Fabienne, Lamalice, Annie, Lévesque, Esther, Ravel, André et Rousse, Daniel.
2018.
« OHMi-Nunavik: a multi-thematic and cross-cultural research program studying the cumulative effects of climate and socio-economic changes on Inuit communities ».
Écoscience, vol. 25, nº 4.
pp. 311-324.
Blum, Guillaume et Cova, Véronique.
2018.
« Le design management en discussion ».
Sciences du Design, vol. 7, nº 1.
pp. 21-27.
Blum, Guillaume et Ebrahimi, Mehran.
2018.
« Émergence des connaissances liées à l’éco-innovation : l’orientation des savoirs conduite par le concept d’avion vert ».
Technologie et innovation, vol. 18, nº 3.
Boivin, Guillaume, Viens, Martin et Belanger, Pierre.
2018.
« Plane wave SH0 piezoceramic transduction optimized using geometrical parameters ».
Sensors, vol. 18, nº 2.
Bolduc, M., Trudeau, C., Beaupré, P., Cloutier, S. G. et Galarneau, P..
2018.
« Thermal dynamics effects using pulse-shaping laser sintering of printed silver inks ».
Scientific Reports, vol. 8, nº 1.
p. 1418.
Bonfiglio, Paolo, Pompoli, Francesco, Horoshenkov, Kirill V., Rahim, Mahmud Iskandar B. Seth A., Jaouen, Luc, Rodenas, Julia, Bécot, François-Xavier, Gourdon, Emmanuel, Jaeger, Dirk, Kursch, Volker, Tarello, Maurizio, Roozen, Nicolaas Bernardus, Glorieux, Christ, Ferrian, Fabrizio, Leroy, Pierre, Vangosa, Francesco Briatico, Dauchez, Nicolas, Foucart, Félix, Lei, Lei, Carillo, Kevin, Doutres, Olivier, Sgard, Franck, Panneton, Raymond, Verdiere, Kévin, Bertolini, Claudio, Bär, Rolf, Groby, Jean-Philippe, Geslain, Alan, Poulain, Nicolas, Rouleau, Lucie, Guinault, Alain, Ahmadi, Hamid et Forge, Charlie.
2018.
« How reproducible are methods to measure the dynamic viscoelastic properties of poroelastic media? ».
Journal of Sound and Vibration, vol. 428.
pp. 26-43.
Bonnet, Fabien, Nélisse, Hugues et Voix, Jeremie.
2018.
« Acoustical corrections to be used for improved in-ear noise dosimetry measurements ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 143, nº 3.
p. 1910.
Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie.
2018.
« Effects of ear canal occlusion on hearing sensitivity: A loudness experiment ».
Journal of the Acoustical Society of America, vol. 143, nº 6.
pp. 3574-3582.
Botez, R. M..
2018.
« Morphing wing, UAV and aircraft multidisciplinary studies at the Laboratory of Applied Research in Active Controls, Avionics and AeroServoElasticity LARCASE ».
AerospaceLab Journal, nº 14.
Botez, R. M., Koreanschi, A., Gabor, O. S., Tondji, Y., Guezguez, M., Kammegne, J. T., Grigorie, L. T., Sandu, D., Mebarki, Y., Mamou, M., Amoroso, F., Pecora, R., Lecce, L., Amendola, G., Dimino, I. et Concilio, A..
2018.
« Numerical and experimental transition results evaluation for a morphing wing and aileron system ».
Aeronautical Journal, vol. 122, nº 1251.
pp. 747-784.
Boton, Conrad.
2018.
« Supporting constructability analysis meetings with Immersive Virtual Reality-based collaborative BIM 4D simulation ».
Automation in Construction, vol. 96.
pp. 1-15.
Boton, Conrad et Forgues, Daniel.
2018.
« Comprendre l’impact du numérique sur la gestion de projet en construction ».
Lien social et Politiques, nº 81.
pp. 41-60.
Boton, Conrad et Forgues, Daniel.
2018.
« Practices and processes in BIM projects: An exploratory case study ».
Advances in Civil Engineering, vol. 2018.
Boton, Conrad, Forgues, Daniel et Halin, Gilles.
2018.
« A framework for Building Information Modeling implementation in engineering education ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 45, nº 10.
pp. 866-877.
Boton, Conrad, Rivest, Louis, Forgues, Daniel et Jupp, Julie R..
2018.
« Comparison of shipbuilding and construction industries from the product structure standpoint ».
International Journal of Product Lifecycle Management, vol. 11, nº 3.
pp. 191-220.
Bouachir, Wassim, Gouiaa, Rafik, Li, Bo et Noumeir, Rita.
2018.
« Intelligent video surveillance for real-time detection of suicide attempts ».
Pattern Recognition Letters, vol. 110.
pp. 1-7.
Bouchami, Anoir, Elsayed, Mohannad Y. et Nabki, Frederic.
2018.
« A 1.4-mW 14-MHz MEMS oscillator based on a differential adjustable-bandwidth transimpedance amplifier and piezoelectric disk resonator ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 65, nº 10.
pp. 3414-3423.
Bouhelal, A., Smaili, A., Guerri, O., Bouhelal, A. et Masson, C..
2018.
« Numerical investigation of turbulent flow around a recent horizontal axis wind Turbine using low and high Reynolds models ».
Journal of Applied Fluid Mechanics, vol. 11, nº 1.
pp. 151-164.
Boukerma, Hanene, Choisy, Christophe, Farah, Nadir et Cheriet, Mohamed.
2018.
« The efficiency of the NSHPZ-HMM: theoretical and practical study ».
Applied Intelligence, vol. 48, nº 12.
pp. 4660-4677.
Boukherroub, Tasseda, D'Amours, Sophie et Rönnqvist, Mikael.
2018.
« Sustainable forest management using decision theaters: Rethinking participatory planning ».
Journal of Cleaner Production, vol. 179.
pp. 567-580.
Bouktif, Salah, Fiaz, Ali, Ouni, Ali et Serhani, Mohamed Adel.
2018.
« Optimal deep learning LSTM model for electric load forecasting using feature selection and genetic algorithm: Comparison with machine learning approaches ».
Energies, vol. 11, nº 7.
Bourgeois, François-René, Monette, Frédéric et Cyr, Daniel G..
2018.
« Operational modifications for the development of nitrifying bacteria in a large-scale biological aerated filter and its impact on wastewater treatment ».
Water Science and Technology, vol. 78, nº 8.
pp. 1704-1714.
Bouslah, Bassem, Gharbi, Ali et Pellerin, Robert.
2018.
« Joint production, quality and maintenance control of a two-machine line subject to operation-dependent and quality-dependent failures ».
International Journal of Production Economics, vol. 195.
pp. 210-226.
Bouzid, Abdel-Hakim et Zhu, L.inbo.
2018.
« A study of neighbouring tube expansion effect on the residual contact pressure of tube-to-tubesheet joints ».
International Journal of Pressure Vessels and Piping, vol. 165.
pp. 185-192.
Brahmi, Brahim, Saad, Maarouf, Brahmi, Abdelkrim, Luna, Cristobal Ochoa et Rahman, Mohammad Habibur.
2018.
« Compliant control for wearable exoskeleton robot based on human inverse kinematics ».
International Journal of Advanced Robotic Systems, vol. 15, nº 6.
Brahmi, Brahim, Saad, Maarouf, Lam, Jacqueline Tu Anh Thu, Luna, Cristobal Ochoa, Archambault, Philippe S. et Rahman, Mohammad H..
2018.
« Adaptive control of a 7-DOF exoskeleton robot with uncertainties on kinematics and dynamics ».
European Journal of Control, vol. 42.
pp. 77-87.
Brahmi, Brahim, Saad, Maarouf, Ochoa Luna, Cristobal, Archambault, Philippe S. et Rahman, Mohammad H..
2018.
« Passive and active rehabilitation control of human upper-limb exoskeleton robot with dynamic uncertainties ».
Robotica, vol. 36, nº 11.
pp. 1757-1779.
Brahmi, Brahim, Saad, Maarouf, Ochoa Luna, Cristobal, Rahman, Mohammad Habibur et Brahmi, Abdelkrim.
2018.
« Adaptive tracking control of an exoskeleton robot with uncertain dynamics based on estimated time delay control ».
IEEE/ASME Transactions on Mechatronics, vol. 23, nº 2.
pp. 575-585.
Brun, André L., Britto, Alceu S., Oliveira, Luiz S., Enembreck, Fabricio et Sabourin, Robert.
2018.
« A framework for dynamic classifier selection oriented by the classification problem difficulty ».
Pattern Recognition, vol. 76.
pp. 175-190.
Buddhadasa, Madhuwanthi, Lerouge, Sophie et Girard-Lauriault, Pierre-Luc.
2018.
« Plasma polymer films to regulate fibrinogen adsorption: Effect of pressure and competition with human serum albumin ».
Plasma Processes and Polymers, vol. 15, nº 9.
Bureau, Nathalie J., Deslauriers, Maguy, Lepage-Saucier, Marianne, Rouleau, Dominique M., Roy, André, Tétreault, Patrice et Hagemeister, Nicola.
2018.
« Rotator cuff tear morphologic parameters at magnetic resonance imaging: Relationship with muscle atrophy and fatty infiltration and patient-reported function and health-related quality of life ».
Journal of Computer Assisted Tomography, vol. 42, nº 5.
pp. 784-791.
Caggiano, Alessandra, Rimpault, Xavier, Teti, Roberto, Balazinski, Marek, Chatelain, Jean-Francois et Nele, Luigi.
2018.
« Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly ».
CIRP Annals, vol. 67, nº 1.
pp. 483-486.
Cambron, P., Masson, C., Tahan, A. et Pelletier, F..
2018.
« Control chart monitoring of wind turbine generators using the statistical inertia of a wind farm average ».
Renewable Energy, vol. 116, nº B.
pp. 88-98.
Cappai, Francesco, Forgues, Daniel et Glaus, Mathias.
2018.
« Socio-economic indicators for the ex-post evaluation of Brownfield rehabilitation: A case study ».
Urban Science, vol. 2, nº 4.
Cappai, Francesco, Forgues, Daniel et Glaus, Mathias.
2018.
« The integration of socio-economic indicators in the CASBEE-UD evaluation system: A case study ».
Urban Science, vol. 2, nº 1.
Carass, Aaron, Cuzzocreo, Jennifer L., Han, Shuo, Hernandez-Castillo, Carlos R., Rasser, Paul E., Ganz, Melanie, Beliveau, Vincent, Dolz, Jose, Ben Ayed, Ismail, Desrosiers, Christian, Thyreau, Benjamin, Romero, José E., Coupé, Pierrick, Manjón, José V., Fonov, Vladimir S., Collins, D. Louis, Ying, Sarah H., Onyike, Chiadi U., Crocetti, Deana, Landman, Bennett A., Mostofsky, Stewart H., Thompson, Paul M. et Prince, Jerry L..
2018.
« Comparing fully automated state-of-the-art cerebellum parcellation from magnetic resonance images ».
NeuroImage, vol. 183.
pp. 150-172.
Carbonneau, Marc-André, Cheplygina, Veronika, Granger, Eric et Gagnon, Ghyslain.
2018.
« Multiple instance learning: A survey of problem characteristics and applications ».
Pattern Recognition, vol. 77.
pp. 329-353.
Carillo, K., Sgard, F. et Doutres, O..
2018.
« Numerical study of the broadband vibro-acoustic response of an earmuff ».
Applied Acoustics, vol. 134.
pp. 25-33.
Carioli, Johan, Delnavaz, Aidin, Zednik, Ricardo J. et Voix, Jérémie.
2018.
« Piezoelectric earcanal bending sensor ».
IEEE Sensors Journal, vol. 18, nº 5.
pp. 2060-2067.
Cariou, Pierre, Cheaitou, Ali, Larbi, Rim et Hamdan, Sadeque.
2018.
« Liner shipping network design with emission control areas: A genetic algorithm-based approach ».
Transportation Research Part D: Transport and Environment, vol. 63.
pp. 604-621.
Carret, Jean-Claude, Di Benedetto, Hervé et Sauzéat, Cédric.
2018.
« Characterization of asphalt mixes behaviour from dynamic tests and comparison with conventional cyclic tension-compression tests ».
Applied Sciences, vol. 8, nº 11.
Carret, Jean-Claude, Di Benedetto, Herve et Sauzeat, Cedric.
2018.
« Multi modal dynamic linear viscoelastic back analysis for asphalt mixes ».
Journal of Nondestructive Evaluation, vol. 37, nº 2.
Carret, Jean-Claude, Pedraza, Alvaro, Di Benedetto, Hervé et Sauzeat, Cédric.
2018.
« Comparison of the 3-dim linear viscoelastic behavior of asphalt mixes determined with tension-compression and dynamic tests ».
Construction and Building Materials, vol. 174.
pp. 529-536.
Causse, Philippe, Ravey, Christophe et Trochu, François.
2018.
« Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding ».
Journal of Composites Science, vol. 2, nº 2.
Cavka, Hasan Burak, Staub-French, Sheryl et Poirier, Erik A..
2018.
« Levels of BIM compliance for model handover ».
Journal of Information Technology in Construction, vol. 23.
pp. 243-258.
Chaddad, Ahmad, Desrosiers, Christian et Niazi, Tamim.
2018.
« Deep radiomic analysis of MRI related to Alzheimer's disease ».
IEEE Access, vol. 6.
pp. 58213-58221.
Chadha, K., Ahmed, Z., Aranas, C., Shahriari, D. et Jahazi, M..
2018.
« Influence of strain rate on dynamic transformation of austenite in an as-cast medium-carbon low-alloy steel ».
Materialia, vol. 1.
pp. 155-167.
Chakravorty, Tanushri, Bilodeau, Guillaume-Alexandre et Granger, Éric.
2018.
« Tracking using numerous anchor points ».
Machine Vision and Applications, vol. 29, nº 2.
pp. 247-261.
Champliaud, Henri et Feng, Zhengkun.
2018.
« Numerical and experimental comparisons of pressed blades for large Francis turbine runners manufactured with a reconfigurable pressing setup and a conventional setup ».
International Journal of Service and Computing Oriented Manufacturing (IJSCOM), vol. 3, nº 4.
pp. 293-317.
Charbonneau, P., Chitour, M. A., Robert, T., Saint-Pierre Cote, S., Aissaoui, R. et Labbe, D. R..
2018.
« Evaluation of the impact of a virtual self-avatar on gait parameters ».
Annals of Physical and Rehabilitation Medicine, vol. 61, nº suppl..
e65-e66.
Chen, Jianqiang, Demers, Vincent, Turner, Daniel P. et Bocher, Philippe.
2018.
« Experimental investigation on high-cycle fatigue of inconel 625 superalloy brazed joints ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 49A, nº 4.
pp. 1244-1253.
Chen, Jie, Brissette, François P. et Chen, Hua.
2018.
« Using reanalysis-driven regional climate model outputs for hydrology modelling ».
Hydrological Processes, vol. 32, nº 19.
pp. 3019-3031.
Chen, Jie, Li, Chao, Brissette, François P., Chen, Hua, Wang, Mingna et Essou, Gilles R. C..
2018.
« Impacts of correcting the inter-variable correlation of climate model outputs on hydrological modeling ».
Journal of Hydrology, vol. 560.
pp. 326-341.
Chen, L. M., Yao, N., Garg, E., Zhu, Y., Nguyen, T. T. T., Pokhvisneva, I., Hari Dass, S. A., Unternaehrer, E., Gaudreau, H., Forest, M., McEwen, L. M., MacIsaac, J. L., Kobor, M. S., Greenwood, C. M. T., Silveira, P. P., Meaney, M. J. et O'Donnell, K. J..
2018.
« PRS-on-Spark (PRSoS): A novel, efficient and flexible approach for generating polygenic risk scores ».
BMC Bioinformatics, vol. 19, nº 1.
Cheng, Matthew P., Cheng, Alexandre P. et Lee, Todd C..
2018.
« The reply ».
American Journal of Medicine, vol. 131, nº 4.
Chenitz, Régis, Kramm, Ulrike I., Lefèvre, Michel, Glibin, Vassili, Zhang, Gaixia, Sun, Shuhui et Dodelet, Jean-Pol.
2018.
« A specific demetalation of Fe-N4 catalytic sites in the micropores of NC-Ar + NH3 is at the origin of the initial activity loss of the highly active Fe/N/C catalyst used for the reduction of oxygen in PEM fuel cells ».
Energy and Environmental Science, vol. 11, nº 2.
pp. 365-382.
Chit Dirani, Hind, Merkhouf, Arezki, Kedjar, Bachir, Giroux, Anne-Marie et Al Haddad, Kamal.
2018.
« Rotor inter-turn short circuit impact on large hydro generator magnetic quantities ».
IEEE Transactions on Industry Applications, vol. 54, nº 4.
pp. 3702-3711.
Chit-Dirani, Hind, Merkhouf, Arezki, Giroux, Anne Marie, Kedjar, Bachir et Al-Haddad, Kamal.
2018.
« Impact of real air-gap non uniformity on the electromagnetic forces of a large hydro generator ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 11.
pp. 8464-8475.
Chossat, Jean-Baptiste, Maslyczyk, Alexis, Lavertu, Jean-Simon et Duchaine, Vincent.
2018.
« The programmable permanent magnet actuator: A paradigm shift in efficiency for low-speed torque-holding robotic applications ».
IEEE Robotics and Automation Letters, vol. 3, nº 3.
pp. 1751-1758.
Chowdhury, Rasheda Arman, Pellegrino, Giovanni, Aydin, Umit, Lina, Jean-Marc, Dubeau, François, Kobayashi, Eliane et Grova, Christophe.
2018.
« Reproducibility of EEG-MEG fusion source analysis of interictal spikes: Relevance in presurgical evaluation of epilepsy ».
Human Brain Mapping, vol. 39, nº 2.
pp. 880-901.
Clément, Julien, de Guise, Jacques A., Fuentes, Alexandre et Hagemeister, Nicola.
2018.
« Comparison of soft tissue artifact and its effects on knee kinematics between non-obese and obese subjects performing a squatting activity recorded using an exoskeleton ».
Gait and Posture, vol. 61.
pp. 197-203.
Clément, Julien, Raison, Maxime et Rouleau, Dominique M..
2018.
« Reproducibility analysis of upper limbs reachable workspace, and effects of acquisition protocol, sex and hand dominancy ».
Journal of Biomechanics, vol. 68.
pp. 58-64.
Clement, Julien, Toliopoulos, Panagiota, Hagemeister, Nicola, Desmeules, François, Fuentes, Alexandre et Vendittoli, Pascal-André.
2018.
« Healthy 3D knee kinematics during gait: Differences between women and men, and correlation with x-ray alignment ».
Gait and Posture, vol. 64.
pp. 198-204.
Cole, Donald C., Parkes, Margot W., Saint-Charles, Johanne, Gislason, Maya, McKellar, Kaileah et Webb, Jena.
2018.
« Evolution of Capacity Strengthening : Insights from the Canadian Community of Practice in Ecosystem Approaches to Health ».
Transformative Dialogues: Teaching and Learning Journal, vol. 11, nº 2.
Colrain, M., Goldstone, A., Forouzanfar, M., Baker, F. C., Claudatos, S., Gil, M., Alschuler, V., Lim, Y. Q., Rosas, L., Prouty, D. et de Zambotti, M..
2018.
« Effect of evening alcohol intake on nocturnal cardiovascular function in normal adults ».
Alcoholism: Clinical and Experimental Research, vol. 42, nº suppl. 1.
Condo, Carlo, Giard, Pascal, Leduc-Primeau, Francois, Sarkis, Gabi et Gross, Warren J..
2018.
« A 9.52 dB NCG FEC scheme and 162 b/Cycle low-complexity product decoder architecture ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 65, nº 4.
pp. 1420-1431.
Cordeiro, José Carlos Alves, da Silva, Silvana Mendes, da Silva, Adriano Maniçoba et de Paula Ferreira, William.
2018.
« Estratégias híbridas de produção em sistemas make to stock (MTS) emake to order (MTO) com otimização multiobjetivo ».
Produto & Produção, vol. 19, nº 2.
Coria, Ibai, Martín, Iñigo Morales, Bouzid, Abel-Hakim, Heras, Iker et Abasolo, Mikel.
2018.
« Efficient assembly of bolted joints under external loads using numerical FEM ».
International Journal of Mechanical Sciences, vol. 142-143.
pp. 575-582.
Cormier, Laurent et Joncas, Simon.
2018.
« Modelling the effect of temperature on the probabilistic stress–life fatigue diagram of glass fibre–polymer composites loaded in tension along the fibre direction ».
Journal of Composite Materials, vol. 52, nº 2.
pp. 207-224.
Cormier, Laurent et Joncas, Simon.
2018.
« Modelling the storage modulus, transition temperatures and timetemperature superposition characteristics of epoxies and their composites ».
Journal of Thermal Analysis and Calorimetry, vol. 131, nº 3.
pp. 2589-2601.
Couillard, Denis, Dahman, Ghassan, GrandMaison, Marie-Eve, Poitau, Gwenael et Gagnon, Francois.
2018.
« Robust broadband maritime communications: Theoretical and experimental validation ».
Radio Science, vol. 53, nº 6.
pp. 749-760.
Coulibaly, Idrissa, Spiric, Nicolas, Lepage, Richard et St-Jacques, Michele.
2018.
« Semiautomatic road extraction from vhr images based on multiscale and spectral angle in case of earthquake ».
IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 11, nº 1.
pp. 238-248.
Cruz, Rafael M. O., Sabourin, Robert et Cavalcanti, George D. C..
2018.
« Dynamic classifier selection: Recent advances and perspectives ».
Information Fusion, vol. 41.
pp. 195-216.
Cruz, Rafael M. O., Sabourin, Robert et Cavalcanti, George D. C..
2018.
« Prototype selection for dynamic classifier and ensemble selection ».
Neural Computing and Applications, vol. 29, nº 2.
pp. 447-457.
Cunningham, Michael, Samson, Claire, Wood, Alan et Cook, Ian.
2018.
« Aeromagnetic surveying with a rotary-wing unmanned aircraft system: A case study from a zinc deposit in Nash Creek, New Brunswick, Canada ».
Pure and Applied Geophysics, vol. 175, nº 9.
pp. 3145-3158.
da Silva, Everaldo Francisco, Damasceno, Luis Fernando Ferreira, da Silva, Adriano Maniçoba et de Paula Ferreira, William.
2018.
« Impact of missing spare part on production efficiency: An analysis with the OEE indicator ».
Journal of Lean Systems, vol. 3, nº 3.
pp. 76-88.
da Silveira Fleck, Alan, Couture, Caroline, Sauvé, Jean-François, Njanga, Pierre-Eric, Neesham-Grenon, Eve, Lachapelle, Guillaume, Coulombe, Hugo, Hallé, Stéphane, Aubin, Simon, Lavoué, Jérôme et Debia, Maximilien.
2018.
« Diesel engine exhaust exposure in underground mines: Comparison between different surrogates of particulate exposure ».
Journal of Occupational and Environmental Hygiene, vol. 15, nº 7.
pp. 549-558.
Dagenais, François, Vervondel, Valentin, Guzman, Julian E., Hay, Alexander, Delorme, Sébastien, Mould, David et Paquette, Eric.
2018.
« Extended virtual pipes for the stable and real-time simulation of small-scale shallow water ».
Computers and Graphics, vol. 76.
pp. 84-95.
Dahmen, Joseph, Kim, Juchan et Ouellet-Plamondon, Claudiane M..
2018.
« Life cycle assessment of emergent masonry blocks ».
Journal of Cleaner Production, vol. 171.
pp. 1622-1637.
Dancila, B. D. et Botez, R. M..
2018.
« Vertical flight path segments sets for aircraft flight plan prediction and optimisation ».
Aeronautical Journal, vol. 122, nº 1255.
pp. 1371-1424.
Daneault, Véronique, Dumont, Marie, Massé, Éric, Forcier, Pierre, Boré, Arnaud, Lina, Jean-Marc, Doyon, Julien, Vandewalle, Gilles et Carrier, Julie.
2018.
« Plasticity in the sensitivity to light in aging: Decreased non-visual impact of light on cognitive brain activity in older individuals but no impact of lens replacement ».
Frontiers in Physiology, vol. 9.
Dang, D. D., Pham, X. T., Labbe, P., Torriano, F., Morissette, J. F. et Hudon, C..
2018.
« CFD analysis of turbulent convective heat transfer in a hydro-generator rotor-stator system ».
Applied Thermal Engineering, vol. 130.
pp. 17-28.
Daoust, Marc-Kevin.
2018.
« Sciences normatives, procédures neutres ».
Philosophia Scientiae, vol. 22.
pp. 37-57.
Darvishi, Mostafa, Audet, Yves et Blaquière, Yves.
2018.
« Delay monitor circuit and delay change measurement due to SEU in SRAM-based FPGA ».
IEEE Transactions on Nuclear Science, vol. 65, nº 5.
pp. 1153-1160.
Darwish, Ahmed, Di Labbio, Giuseppe, Saleh, Wael et Kadem, Lyes.
2018.
« Modal decomposition and Lagrangian coherent structures analysis of flow past a dysfunctional mechanical aortic valve ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 63, nº 13.
p. 260.
Das, S., Lecours Boucher, X., Rogers, C., Makowski, C., Chouinard-Decorte, F., Oros Klein, K., Beck, N., Rioux, P., Brown, S. T., Mohaddes, Z., Zweber, C., Foing, V., Forest, M., O’Donnell, K. J., Clark, J., Meaney, M. J., Greenwood, C. M. T. et Evans, A. C..
2018.
« Integration of “omics” data and phenotypic data within a unified extensible multimodal framework ».
Frontiers in Neuroinformatics, vol. 12.
D'Avignon, Katherine et Kummert, Michaël.
2018.
« Modeling horizontal storage tanks with encapsulated phase change materials for building performance simulation ».
Science and Technology for the Built Environment, vol. 24, nº 4.
pp. 327-342.
Dawa, Mohamed, Kaddoum, Georges et Sattar, Zeeshan.
2018.
« A generalized lower bound on the Bit-Error-Rate of DCSK Systems over multi-path rayleigh fading channels ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 65, nº 3.
pp. 321-325.
De L’Étoile-Morel, Samuel, Cheng, Matthew P., Cheng, Alexander P., McDonald, Emily G. et Lee, Todd C..
2018.
« Piperacillin-tazobactam use in esbl escherichia coli bacteremia: Should reporting be revised? ».
Journal of the Association of Medical Microbiology and Infectious Disease Canada, vol. 3, nº 1.
pp. 24-29.
de Paula, Nathalia et Melhado, Silvio.
2018.
« Sustainability in management processes: case studies in architectural design firms ».
Journal of Architectural Engineering, vol. 24, nº 4.
Dehghan, Ehsan, Nikabadi, Mohsen Shafiei, Amiri, Maghsoud et Jabbarzadeh, Armin.
2018.
« Hybrid robust, stochastic and possibilistic programming for closed-loop supply chain network design ».
Computers and Industrial Engineering, vol. 123.
pp. 220-231.
Dehghani, Ehsan, Jabalameli, Mohammad Saeed et Jabbarzadeh, Armin.
2018.
« Robust design and optimization of solar photovoltaic supply chain in an uncertain environment ».
Energy, vol. 142.
pp. 139-156.
Dehghani, Ehsan, Jabalameli, Mohammad Saeed, Jabbarzadeh, Armin et Pishvaee, Mir Saman.
2018.
« Resilient solar photovoltaic supply chain network design under business-as-usual and hazard uncertainties ».
Computers and Chemical Engineering, vol. 111.
pp. 288-310.
Dehghanzadeh, Ahmad, Farahani, Gholamreza, Vahedi, Hani et Al-Haddad, Kamal.
2018.
« Model predictive control design for DC-DC converters applied to a photovoltaic system ».
International Journal of Electrical Power and Energy Systems, vol. 103.
pp. 537-544.
Demers, V., Fareh, F., Turenne, S., Demarquette, N. R. et Scalzo, O..
2018.
« Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding ».
Advanced Powder Technology, vol. 29, nº 1.
pp. 180-190.
Derbel, Oussama et Landry Jr., René.
2018.
« Belief and fuzzy theories for driving behavior assessment in case of accident scenarios ».
International Journal of Automotive Technology, vol. 19, nº 1.
pp. 167-177.
Dermanaki Farahani, Rouhollah et Dubé, Martine.
2018.
« Printing polymer nanocomposites and composites in three dimensions ».
Advanced Engineering Materials, vol. 20, nº 2.
Desbois, Adrien, Matei, Svetlana, Beguet, Florian, Perreault, Isabelle, Gervais, Sylvie et de Guise, Jacques.
2018.
« The importance of a three-dimensional-based approach with personalized models for accurately assessing TBSA ».
Journal of Burn Care and Research, vol. 39, nº 2.
pp. 235-244.
Desjardins, Martine, Lefebvre, Christine, De Beaumont, Louis, Lina, Jean-Marc et Jolicoeur, Pierre.
2018.
« Visual event-related magnetic field reveal possible sensory and attentional deficits in older adults following mild traumatic brain injury ».
[Article de conférence]. Psychophysiology, vol. 55, nº Suppl. 1.
S86.
Di Labbio, Giuseppe et Kadem, Lyes.
2018.
« Jet collisions and vortex reversal in the human left ventricle ».
Journal of Biomechanics, vol. 78.
pp. 155-160.
Di Labbio, Giuseppe, Vétel, Jérôme et Kadem, Lyes.
2018.
« Material transport in the left ventricle with aortic valve regurgitation ».
Physical Review Fluids, vol. 3, nº 11.
Dias de Assuncao, Marcos, da Silva Veith, Alexandre et Buyya, Rajkumar.
2018.
« Distributed data stream processing and edge computing: A survey on resource elasticity and future directions ».
Journal of Network and Computer Applications, vol. 103.
pp. 1-17.
Dias de Assunção, Marcos et Lefèvre, Laurent.
2018.
« Bare-metal reservation for cloud: an analysis of the trade off between reactivity and energy efficiency ».
Cluster Computing, vol. 21, nº 2.
pp. 1289-1300.
Diotalevi, Lucien, Petit, Yvan, Brailovski, Vladimir, Nichols, Sylvain, Marchionatti, Emma et Wagnac, Éric.
2018.
« Quasi-static tensile properties of the Cranial Cruciate Ligament (CrCL) in adult cattle: towards the design of a prosthetic CrCL ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 79.
pp. 239-245.
Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2018.
« Performance of a capillary dilution system for high concentration sampling of ultrafine aerosols ».
Aerosol Science and Engineering, vol. 2, nº 2.
92–97.
Dolz, Jose, Desrosiers, Christian et Ben Ayed, Ismail.
2018.
« 3D fully convolutional networks for subcortical segmentation in MRI: A large-scale study ».
NeuroImage, vol. 170.
pp. 456-470.
Dolz, Jose, Xu, Xiaopan, Rony, Jérôme, Yuan, Jing, Liu, Yang, Granger, Éric, Desrosiers, Christian, Zhang, Xi, Ben Ayed, Ismail et Lu, Hongbing.
2018.
« Multiregion segmentation of bladder cancer structures in MRI with progressive dilated convolutional networks ».
Medical Physics, vol. 45, nº 12.
pp. 5482-5493.
Dridi, Lobna et Zhani, Mohamed Faten.
2018.
« A holistic approach to mitigating DoS attacks in SDN networks ».
[Article de conférence]. International Journal of Network Management, vol. 28, nº 1.
Drouin, Simon et Collins, D. Louis.
2018.
« PRISM: an open source framework for the interactive design of GPU volume rendering shaders ».
PLoS ONE, vol. 13, nº 3.
Duclos, N. C., Parent, G., Aissaoui, R., Duclos, C. et Nadeau, S..
2018.
« Using inertial signals to characterize main lower limb gait patterns in individuals post-stroke ».
Annals of Physical and Rehabilitation Medicine, vol. 61, nº suppl..
e445.
Dumberry, Kevin, Duhaime, François et Éthier, Yannic.
2018.
« Erosion monitoring during core overtopping using a laboratory model with digital image correlation and X-ray microcomputed tomography ».
Canadian Geotechnical Journal = Revue Canadienne de Géotechnique, vol. 55, nº 2.
pp. 234-245.
Dumoulin, Romain, Tordini, Francesco, Voix, Jeremie et Cossette, Isabelle.
2018.
« A hearing-care toolkit for young musicians: Combined use of a noise dose measurement app and acoustical manekin ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 144, nº 3.
p. 1929.
Dupont, Thomas, Leclaire, Philippe, Panneton, Raymond et Umnova, Olga.
2018.
« A microstructure material design for low frequency sound absorption ».
Applied Acoustics, vol. 136.
pp. 86-93.
Eesaee, Mostafa, David, Eric, Demarquette, Nicole R. et Fabiani, Davide.
2018.
« Electrical breakdown properties of clay-based LDPE blends and nanocomposites ».
Journal of Nanomaterials, vol. 2018.
El-Bayeh, Claude Ziad, Mougharbel, Imad, Asber, Dalal, Saad, Maarouf, Chandra, Ambrish et Lefebvre, Serge.
2018.
« Novel approach for optimizing the transformer’s critical power limit ».
IEEE Access, vol. 6.
pp. 55870-55882.
El-Bayeh, Claude Ziad, Mougharbel, Imad, Saad, Maarouf, Chandra, Ambrish, Asber, Dalal, Lenoir, Laurent et Lefebvre, Serge.
2018.
« Novel Soft-Constrained Distributed Strategy to meet high penetration trend of PEVs at homes ».
Energy and Buildings, vol. 178.
pp. 331-346.
Elmurngi, Elshrif Ibrahim et Gherbi, Abdelouahed.
2018.
« Unfair reviews detection on Amazon reviews using sentiment analysis with supervised learning techniques ».
Journal of Computer Science, vol. 14, nº 5.
pp. 714-726.
El-Saikaly, Georges, Chaallal, Omar et Benmokrane, Brahim.
2018.
« Fatigue assessment of shear-strengthened RC T-Beams with externally bonded CFRP closed stirrups ».
Journal of Composites for Construction, vol. 22, nº 6.
Endo, Leticia M. A., de Paula Ferreira, William, da Silva, Adriano Maniçoba et Tanaka, Wilson Yoshio.
2018.
« Value stream mapping applied to a cake company ».
Journal of Lean Systems, vol. 3, nº 3.
pp. 64-75.
Errico, F., Desaulniers, G., Gendreau, M., Rei, W. et Rousseau, L. M..
2018.
« The vehicle routing problem with hard time windows and stochastic service times ».
EURO Journal on Transportation and Logistics, vol. 7, nº 3.
pp. 223-251.
Escandon-Quintanilla, Ma-Lorena, Gardoni, Mickael et Cohendet, Patrick.
2018.
« Improving concept development with data exploration in the context of an innovation and technological design course ».
International Journal on Interactive Design and Manufacturing, vol. 12, nº 1.
pp. 161-172.
Esmaeili Salehani, Yaser, Arabnejad, Ehsan et Cheriet, Mohamed.
2018.
« Graph and sparse-based robust nonnegative block value decomposition for clustering ».
IEEE Journal on Selected Topics in Signal Processing, vol. 12, nº 6.
pp. 1561-1574.
Essaadali, R., Jarndal, A., Kouki, A. B. et Ghannouchi, F. M..
2018.
« On the accurate voltage and current analytical relationship to X-Parameters of a nonlinear two-port network ».
IEEE Transactions on Microwave Theory and Techniques, vol. 66, nº 10.
pp. 4439-4451.
Essaadali, Riadh, Jarndal, Anwar, Kouki, Ammar B. et Ghannouchi, Fadhel M..
2018.
« Conversion rules between X-Parameters and linearized two-port network parameters for large-signal operating conditions ».
IEEE Transactions on Microwave Theory and Techniques, vol. 66, nº 11.
pp. 4745-4756.
Fahimnia, Behnam, Jabbarzadeh, Armin et Sarkis, Joseph.
2018.
« Greening versus resilience: A supply chain design perspective ».
Transportation Research Part E: Logistics and Transportation Review, vol. 119.
pp. 129-148.
Falardeau, Timothe et Belanger, Pierre.
2018.
« Ultrasound tomography in bone mimicking phantoms: Simulations and experiments ».
Journal of the Acoustical Society of America, vol. 144, nº 5.
pp. 2937-2946.
Fallaha, Charles et Saad, Maarouf.
2018.
« Model-based sliding functions design for sliding mode robot control ».
International Journal of Modelling, Identification and Control, vol. 30, nº 1.
pp. 48-60.
Fang, Xiaoxing, Wang, Yingxun et Landry, René Jr..
2018.
« Onboard trajectory generation for gyroplane unpowered landing based on optimal lift-to-drag ratio target ».
Aerospace Science and Technology, vol. 82-83.
pp. 438-449.
Farzam, Azarm, Nollet, Marie-José et Khaled, Amar.
2018.
« Susceptibility modelling of seismically induced effects (landslides and rock falls) integrated to rapid scoring procedures for bridges using GIS tools for the Lowlands of the Saint-Lawrence Valley ».
Geomatics, Natural Hazards and Risk, vol. 9, nº 1.
pp. 589-607.
Farzaneh Kaloorazi, Mohammad Hadi, Bonev, Ilian A. et Birglen, Lionel.
2018.
« Simultaneous path placement and trajectory planning optimization for a redundant coordinated robotic workcell ».
Mechanism and Machine Theory, vol. 130.
pp. 346-362.
Farzaneh, Aida, Carriere, Jean, Forgues, Daniel et Monfet, Danielle.
2018.
« Framework for using building information modeling to create a building energy model ».
Journal of Architectural Engineering, vol. 24, nº 2.
Ferrari, Giovanni, Balasubramanian, Prabakaran, Le Guisquet, Stanislas, Piccagli, Lorenzo, Karazis, Kostas, Painter, Brian et Amabili, Marco.
2018.
« Non-linear vibrations of nuclear fuel rods ».
Nuclear Engineering and Design, vol. 338.
pp. 269-283.
Fethalla, Nuradeen, Saad, Maarouf, Michalska, Hannah et Ghommam, Jawhar.
2018.
« Robust observer-based dynamic sliding mode controller for a quadrotor UAV ».
IEEE Access, vol. 6.
pp. 45846-45859.
Filion, Alexandre, Joubair, Ahmed, Tahan, Antoine S. et Bonev, Ilian A..
2018.
« Robot calibration using a portable photogrammetry system ».
Robotics and Computer-Integrated Manufacturing, vol. 49.
pp. 1339-1351.
Forest, M., O'Donnell, K. J., Voisin, G., Gaudreau, H., MacIsaac, J. L., McEwen, L. M., Silveira, P. P., Steiner, M., Kobor, M. S., Meaney, M. J. et Greenwood, C. M. T..
2018.
« Agreement in DNA methylation levels from the Illumina 450K array across batches, tissues, and time ».
Epigenetics, vol. 13, nº 1.
pp. 19-32.
Forouzanfar, Mohamad, Baker, Fiona C., de Zambotti, Massimiliano, McCall, Corey, Giovangrandi, Laurent et Kovacs, Gregory T. A..
2018.
« Toward a better noninvasive assessment of preejection period: A novel automatic algorithm for B-point detection and correction on thoracic impedance cardiogram ».
Psychophysiology, vol. 55, nº 8.
Fourmont, Paul, Gerlein, Luis Felipe, Fortier, François-Xavier, Cloutier, Sylvain G. et Nechache, Riad.
2018.
« Highly efficient thermoelectric microgenerators using nearly room temperature pulsed laser deposition ».
ACS Applied Materials and Interfaces, vol. 10, nº 12.
pp. 10194-10201.
Fournely, Marion, Petit, Yvan, Wagnac, Éric, Laurin, Jérôme, Callot, Virginie et Arnoux, Pierre-Jean.
2018.
« High-speed video analysis improves the accuracy of spinal cord compression measurement in a mouse contusion model ».
Journal of Neuroscience Methods, vol. 293.
pp. 1-5.
Franche, Jean-François et Coulombe, Stéphane.
2018.
« Efficient H.264-to-HEVC transcoding based on motion propagation and post-order traversal of coding tree units ».
IEEE Transactions on Circuits and Systems for Video Technology, vol. 28, nº 12.
pp. 3452-3466.
Fraser, Marc, Fortier, Marlène, Foucher, Delphine, Roumier, Pierre-Hervé, Brousseau, Pauline, Fournier, Michel, Surette, Céline et Vaillancourt, Cathy.
2018.
« Exposure to low environmental concentrations of manganese, lead, and cadmium alters the serotonin system of blue mussels ».
Environmental Toxicology and Chemistry, vol. 37, nº 1.
pp. 192-200.
Friend, Evan, El-Sayegh, Batoul, Pressman, Gregg S., Di Labbio, Giuseppe, Obasare, Edinrin R. et Kadem, Lyes.
2018.
« Orifice eccentricity accentuates flow disturbance due to severe mitral annular calcification ».
[Résumé d'une communication à une conférence]. Journal of the American Society of Echocardiography, vol. 31, nº 6.
B50.
Fry, C., Samson, C., McCausland, P. J. A., Ralchenko, M. et McLeod, T. K..
2018.
« Iron meteorite bulk densities determined via 3-D laser imaging ».
Meteoritics and Planetary Science, vol. 53, nº 6.
pp. 1164-1178.
Fu, Yanqing, Wei, Qiliang, Zhang, Gaixia et Sun, Shuhui.
2018.
« Advanced phosphorus-based materials for lithium/sodium-ion batteries: Recent developments and future perspectives ».
Advanced Energy Materials, vol. 8, nº 13.
Fu, Yanqing, Wei, Qiliang, Zhang, Gaixia, Wang, Xiaomin, Zhang, Jihai, Hu, Yongfeng, Wang, Dongniu, Zuin, Lucia, Zhou, Tao, Wu, Yucheng et Sun, Shuhui.
2018.
« High-performance reversible aqueous Zn-Ion battery based on porous MnOx nanorods coated by MOF-derived N-doped carbon ».
Advanced Energy Materials, vol. 8, nº 26.
Gadalla, Mahmoud, François, Véronique et Ung, Bora.
2018.
« Realization of multicore fiber reconfigurable optical add drop multiplexer ».
IEEE Photonics Technology Letters, vol. 30, nº 3.
pp. 281-284.
Gagnon, François, Dahman, Ghassan et Poitau, Gwenael.
2018.
« Extending the ITU-R P.530 deep-fading outage probability results to SIMO-MRC and MIMO-MRC line-of-sight systems ».
IEEE Wireless Communications Letters, vol. 7, nº 6.
pp. 1086-1089.
Gandi, Apparao, Carter, Alan et Singh, Dharamveer.
2018.
« Effect of binder type on Full Depth Reclamation material behaviour ».
International Journal of Pavement Research and Technology, vol. 11, nº 8.
pp. 888-898.
Garcia-Cano, Edgar, Arambula Cosio, Fernando, Duong, Luc, Bellefleur, Christian, Roy-Beaudry, Marjolaine, Joncas, Julie, Parent, Stefan et Labelle, Hubert.
2018.
« Dynamic ensemble selection of learner-descriptor classifiers to assess curve types in adolescent idiopathic scoliosis ».
Medical and Biological Engineering and Computing, vol. 56, nº 12.
pp. 2221-2231.
Garcia-Cano, Edgar, Arambula Cosio, Fernando, Duong, Luc, Bellefleur, Christian, Roy-Beaudry, Marjolaine, Joncas, Julie, Parent, Stefan et Labelle, Hubert.
2018.
« Prediction of spinal curve progression in adolescent idiopathic scoliosis using random forest regression ».
Computers in Biology and Medicine, vol. 103.
pp. 34-43.
García-Floriano, Andrés, López-Martín, Cuauhtémoc, Yáñez-Márquez, Cornelio et Abran, Alain.
2018.
« Support vector regression for predicting software enhancement effort ».
Information and Software Technology, vol. 97.
pp. 99-109.
Garfa, Arbia, Carter, Alain et Dony, Anne.
2018.
« Rutting resistance of HMA rehabilitated with micro-surfacing ».
Open Journal of Civil Engineering, vol. 8, nº 2.
pp. 245-255.
Gaudreault, Martin, Joubair, Ahmed et Bonev, Ilian.
2018.
« Self-calibration of an industrial robot using a novel affordable 3D measuring device ».
Sensors, vol. 18, nº 10.
Gaudreault, Pierre-Olivier, Gosselin, Nadia, Lafortune, Marjolaine, Deslauriers-Gauthier, Samuel, Martin, Nicolas, Bouchard, Maude, Dubé, Jonathan, Lina, Jean-Marc, Doyon, Julien et Carrier, Julie.
2018.
« The association between white matter and sleep spindles differs in young and older individuals ».
Sleep, vol. 41, nº 9.
Gauthier, Philippe, Proulx, Sébastien et Hamarat, Yaprak.
2018.
« L’esthétique de la santé publique : Essai d’analyse réaliste des qualités de l’expérience de services ».
Sciences du Design, vol. 7, nº 1.
pp. 86-103.
Gedamu, Dawit, Asuo, Ivy M., Benetti, Daniele, Basti, Matteo, Ka, Ibrahima, Cloutier, Sylvain G., Rosei, Federico et Nechache, Riad.
2018.
« Solvent-antisolvent ambient processed large grain size perovskite thin films for high-performance solar cells ».
Scientific Reports, vol. 8.
p. 11.
Genoyer, Julie, Soulestin, Jérémie et Demarquette, Nicole R..
2018.
« Influence of the molar masses on compatibilization mechanism induced by two block copolymers in PMMA/PS blends ».
Journal of Rheology, vol. 62, nº 3.
pp. 681-693.
Gerard, Ian J., Kersten-Oertel, Marta, Drouin, Simon, Hall, Jeffrey A., Petrecca, Kevin, De Nigris, Dante, Di Giovanni, Daniel A., Arbel, Tal et Collins, D. Louis.
2018.
« Combining intraoperative ultrasound brain shift correction and augmented reality visualizations: a pilot study of eight cases ».
Journal of Medical Imaging, vol. 5, nº 2.
Getu, Tilahun M., Ajib, Wessam et Landry, René.
2018.
« Performance analysis of energy-based RFI detector ».
IEEE Transactions on Wireless Communications, vol. 17, nº 10.
pp. 6601-6616.
Getu, Tilahun M., Ajib, Wessam et Landry, René.
2018.
« Simple F–Test based spectrum sensing techniques for multi-antenna cognitive radios ».
IEEE Transactions on Communications, vol. 66, nº 11.
pp. 5081-5096.
Getu, Tilahun M., Ajib, Wessam et Landry, René Jr..
2018.
« Power-based broadband RF interference detector for wireless communication systems ».
IEEE Wireless Communications Letters, vol. 7, nº 6.
pp. 1002-1005.
Ghafarizadeh, S. B., Fréchette, M. F. et David, E..
2018.
« Fabrication and dielectric, mechanical, and thermal properties of Low-Density Polyethylene (LDPE) composites containing surface-passivated silicon (Si/SiO2Core/Shell Nanoparticles) ».
Polymer - Plastics Technology and Engineering, vol. 57, nº 4.
pp. 327-334.
Ghaib, Maha, Shateri, Mohammadhadi, Thomson, Douglas et Svecova, Dagmar.
2018.
« Study of FRP bars under tension using acoustic emission detection technique ».
Journal of Civil Structural Health Monitoring, vol. 8, nº 2.
pp. 285-300.
Ghannem, Adnane, Kessentini, Marouane, Hamdi, Mohammad Salah et El Boussaidi, Ghizlane.
2018.
« Model refactoring by example: A multi-objective search based software engineering approach ».
Journal of Software: Evolution and Process, vol. 30, nº 4.
Gharaaty, Sepehr, Shu, Tingting, Joubair, Ahmed, Xie, Wen Fang et Bonev, Ilian A..
2018.
« Online pose correction of an industrial robot using an optical coordinate measure machine system ».
International Journal of Advanced Robotic Systems, vol. 15, nº 4.
Gholami, Ehsan et Demers, Vincent.
2018.
« Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ».
International Journal of Mechanical and Production Engineering, vol. 6, nº 10.
pp. 33-38.
Ghomi-Avili, Morteza, Jalali Naeini, Seyed Gholamreza, Tavakkoli-Moghaddam, Reza et Jabbarzadeh, Armin.
2018.
« A fuzzy pricing model for a green competitive closed-loop supply chain network design in the presence of disruptions ».
Journal of Cleaner Production, vol. 188.
pp. 425-442.
Ghommam, Jawhar, El Ferik, Sami et Saad, Maarouf.
2018.
« Robust adaptive path-following control of underactuated marine vessel with off-track error constraint ».
International Journal of Systems Science, vol. 49, nº 7.
pp. 1540-1558.
Ghommam, Jawhar et Saad, Maarouf.
2018.
« Adaptive leader-follower formation control of underactuated surface vessels under asymmetric range and bearing constraints ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 2.
pp. 852-865.
Giard, Pascal, Balatsoukas-Stimming, Alexios, Sarkis, Gabi, Thibeault, Claude et Gross, Warren J..
2018.
« Fast low-complexity decoders for low-rate polar codes ».
Journal of Signal Processing Systems, vol. 90, nº 5.
pp. 675-685.
Giard, Pascal, Sarkis, Gabi, Leroux, Camille, Thibeault, Claude et Gross, Warren J..
2018.
« Low-latency software polar decoders ».
Journal of Signal Processing Systems, vol. 90, nº 5.
pp. 761-775.
Gibout, Stéphane, Franquet, Erwin, Haillot, Didier, Bédécarrats, Jean-Pierre et Dumas, Jean-Pierre.
2018.
« Challenges of the usual graphical methods used to characterize phase change materials by differential scanning calorimetry ».
Applied Sciences, vol. 8, nº 1.
Glas, Robin, Lautz, Laura, McKenzie, Jeffrey, Mark, Bryan, Baraer, Michel, Chavez, Daniel et Maharaj, Laura.
2018.
« A review of the current state of knowledge of proglacial hydrogeology in the Cordillera Blanca, Peru ».
Wiley Interdisciplinary Reviews-Water, vol. 5, nº 5.
Golaghazadeh, Firouzeh, Coulombe, Stéphane, Coudoux, François et Corlay, Patrick.
2018.
« Checksum-filtered list decoding applied to H.264 and H.265 video error correction ».
IEEE Transactions on Circuits and Systems for Video Technology, vol. 28, nº 8.
pp. 1993-2006.
Goli, Alizera, Aazami, Adel et Jabbarzadeh, Armin.
2018.
« Accelerated cuckoo optimization algorithm for capacitated vehicle routing problem in competitive conditions ».
International Journal of Artificial Intelligence, vol. 16, nº 1.
pp. 88-112.
Graff, J. R., Ernst, R. E. et Samson, C..
2018.
« Evidence for triple-junction rifting focussed on local magmatic centres along Parga Chasma, Venus ».
Icarus, vol. 306.
pp. 122-138.
Graziani, Andrea, Iafelice, Christian, Raschia, Simone, Perraton, Daniel et Carter, Alan.
2018.
« A procedure for characterizing the curing process of cold recycled bitumen emulsion mixtures ».
Construction and Building Materials, vol. 173.
pp. 754-762.
Grichi, Yosra, Beauregard, Yvan et Dao, Thien-My.
2018.
« Optimization of obsolescence forecasting using new hybrid approach based on the RF method and the meta-heuristic genetic algorithm ».
American Journal of Management, vol. 18, nº 2.
pp. 27-38.
Gruson, Adrien, Hua, Binh-Son, Vibert, Nicolas, Nowrouzezahrai, Derek et Hachisuka, Toshiya.
2018.
« Gradient-domain volumetric photon density estimation ».
ACM Transactions on Graphics, vol. 37, nº 4.
Gueziri, Houssem-Eddine, McGuffin, Michael J. et Laporte, Catherine.
2018.
« Latency management in scribble-based interactive segmentation of medical images ».
IEEE Transactions on Biomedical Engineering, vol. 65, nº 5.
pp. 1140-1150.
Gundelwein, L., Miró, J., Gonzalez Barlatay, F., Lapierre, C., Rohr, K. et Duong, L..
2018.
« Personalized stent design for congenital heart defects using pulsatile blood flow simulations ».
Journal of Biomechanics, vol. 81.
pp. 68-75.
Guo, Baoqi, Aranas, Clodualdo, Foul, Anes, Ji, Xiankun, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2018.
« Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ».
Materials Science and Engineering: A, vol. 729.
pp. 119-124.
Guo, Baoqi, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2018.
« Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 49, nº 12.
pp. 5956-5961.
Guo, Chao, Shoudao, Huang, Wang, Jiabao, Yaojing, Feng et Wang, Qingsong.
2018.
« Design of cryogenic permanent magnet synchronous motor for submerged liquefied natural gas pump ».
IEEE Transactions on Magnetics, vol. 54, nº 11.
Gupta, Anubha A., Arunachalam, Shivaram, Cloutier, Sylvain G. et Izquierdo, Ricardo.
2018.
« Fully aerosol-jet printed, high-performance nanoporous ZnO ultraviolet photodetectors ».
ACS Photonics, vol. 5, nº 10.
pp. 3923-3929.
Guyot, Capucine et Lerouge, Sophie.
2018.
« Can we achieve the perfect injectable scaffold for cell therapy? ».
[Éditorial]. Future Science, vol. 4, nº 4.
Habibzadeh Boukani, Hamid, Viens, Martin, Tahan, Souheil-Antoine et Gagnon, Martin.
2018.
« Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 5-8.
pp. 2201-2211.
Haddaji, Nassim, Bayati, Abdolkhalegh, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« BackHauling-as-a-Service (BHaaS) for 5G optical sliced networks: an optimized TCO approach ».
Journal of Lightwave Technology, vol. 36, nº 18.
pp. 4006-4017.
Haddaji, Nassim, Nguyen, Kim et Cheriet, Mohamed.
2018.
« Towards end-to-end integrated optical packet network: Empirical analysis ».
Optical Switching and Networking, vol. 27.
pp. 18-39.
Hafemann, Luiz G., Oliveira, Luiz S. et Sabourin, Robert.
2018.
« Fixed-sized representation learning from offline handwritten signatures of different sizes ».
International Journal on Document Analysis and Recognition, vol. 21, nº 3.
pp. 219-232.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2018.
« Quality issue in forecasting problem of production and maintenance policy for production unit ».
International Journal of Production Research, vol. 56, nº 18.
pp. 6147-6163.
Hammou, Mahmoud, Bouzidane, Ahmed, Thomas, Marc, Benariba, Aboubakeur et Bouzit, Mohamed.
2018.
« Static and dynamic characteristics of an orifice compensated three-pad hydrostatic squeeze film damper ».
Industrial Lubrication and Tribology, vol. 70, nº 6.
pp. 1078-1085.
Harris, Kyle, White, Don, Samson, Claire et Tao, Jiang.
2018.
« 4D vertical seismic profile modeling of CO2 injection scenarios to evaluate field results at Aquistore ».
International Journal of Greenhouse Gas Control, vol. 72.
pp. 192-207.
Hashem, Mortazavi, Mehrjerdi, Hasan, Saad, Maarouf, Lefebvre, Serge, Asber, Dalal et Lenoir, Laurent.
2018.
« An impedance-based method for distribution system monitoring ».
IEEE Transactions on Smart Grid, vol. 9, nº 1.
pp. 220-229.
Hawedi, Mohamed, Talhi, Chamseddine et Boucheneb, Hanifa.
2018.
« Multi-tenant intrusion detection system for public cloud (MTIDS) ».
Journal of Supercomputing, vol. 74, nº 10.
pp. 5199-5230.
Hawila, Abed Al Waheed, Merabtine, Abdelatif, Chemkhi, Mahdi, Bennacer, Rachid et Troussier, Nadège.
2018.
« An analysis of the impact of PMV-based thermal comfort control during heating period: A case study of highly glazed room ».
Journal of Building Engineering, vol. 20.
pp. 353-366.
Hay, A., Samson, C. et Ellery, A..
2018.
« Robotic magnetic mapping with the Kapvik planetary micro-rover ».
International Journal of Astrobiology, vol. 17, nº 3.
pp. 218-227.
Hay, A., Samson, C., Tuck, L. et Ellery, A..
2018.
« Magnetic surveying with an unmanned ground vehicle ».
Journal of Unmanned Vehicle Systems, vol. 6, nº 4.
pp. 249-266.
Heba, Abdussalam et Assaf, Gabriel J..
2018.
« Bayes linear regression performance model depending on experts' knowledge and current road condition ».
Advances in Civil Engineering Materials, vol. 7, nº 3.
pp. 428-445.
Heidarpour, Behdad, Dziong, Zbigniew, Lau, Wing Cheong et Vakilinia, Shahin.
2018.
« Pricing the volume-based data services in cellular wireless markets ».
IEEE Transactions on Network and Service Management, vol. 15, nº 1.
pp. 260-274.
Helal, E., Amurin, L. G., Carastan, D. J., de Sousa Jr., R. R., David, E., Fréchette, M. et Demarquette, N. R..
2018.
« Tuning the mechanical and dielectric properties of clay-containing thermoplastic elastomer nanocomposites ».
Polymer Engineering and Science, vol. 58.
E174-E181.
Helal, E., Pottier, C., David, E., Fréchette, M. et Demarquette, N. R..
2018.
« Polyethylene/Thermoplastic elastomer/Zinc Oxide nanocomposites for high voltage insulation applications: Dielectric, mechanical and rheological behavior ».
European Polymer Journal, nº 100.
pp. 258-269.
Herceg, Marijan, Kaddoum, Georges, Vranjes, Denis et Soujeri, Ebrahim.
2018.
« Permutation Index DCSK modulation technique for secure multi-user high-data-rate communication systems ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 4.
pp. 2997-3011.
Herceg, Marijan, Vranješ, Denis, Kaddoum, Georges et Soujeri, Ebrahim.
2018.
« Commutation Code Index DCSK modulation technique for high-data-rate communication systems ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 65, nº 12.
pp. 1954-1958.
Hernández-Domínguez, Laura, Ratté, Sylvie, Sierra-Martínez, Gerardo et Roche-Bergua, Andrés.
2018.
« Computer-based evaluation of Alzheimer's disease and mild cognitive impairment patients during a picture description task ».
Alzheimer's and Dementia: Diagnosis, Assessment and Disease Monitoring, vol. 10.
pp. 260-268.
Hertz, Alain, Montagné, Romain et Gagnon, François.
2018.
« Online algorithms for the maximum k-colorable subgraph problem ».
Computers and Operations Research, vol. 91.
pp. 209-224.
Hidaka, N., Michikawa, T., Motamedi, A., Yabuki, N. et Fukuda, T..
2018.
« Polygonization of point clouds of repetitive components in civil infrastructure based on geometric similarities ».
Automation in Construction, vol. 86.
pp. 99-117.
Hidaka, Nao, Michikawa, Takashi, Motamedi, Ali, Yabuki, Nobuyoshi et Fukuda, Tomohiro.
2018.
« Polygonization of point cloud of tunnels using lofting operation ».
International Journal of Automation Technology, vol. 12, nº 3.
pp. 356-368.
Higgins, J., Nadeau, S., Emeraux, B., Akremi, H. et Aissaoui, R..
2018.
« Effects of asymmetrical resistance imposed during repeated bilateral upper limb pushing movements on bilateral coordination post-stroke ».
Annals of Physical and Rehabilitation Medicine, vol. 61, nº suppl..
e487-e488.
Hoa Ngan, Nguyen et Bocher, Philippe.
2018.
« Finite element analysis simulation of the effect of induction hardening on rolling contact fatigue ».
Journal of Tribology, vol. 140, nº 6.
Hochuli, A. G., Oliveira, L. S., Britto Jr., A. S. et Sabourin, R..
2018.
« Handwritten digit segmentation: Is it still necessary? ».
Pattern Recognition, vol. 78.
pp. 1-11.
Hof, Lucas A. et Wuthrich, Rolf.
2018.
« Industry 4.0 Towards fabrication of mass-personalized parts on glass by Spark Assisted Chemical Engraving (SACE) ».
Manufacturing Letters, vol. 15.
pp. 76-80.
Hof, Lucas A. et Wüthrich, Rolf.
2018.
« Rapid prototyping of packaged glass devices: Eliminating a process step in the manufacturing workflow from micromachining to die singularizing ».
Manufacturing Letters, vol. 17.
pp. 9-13.
Hosni, Mohamed, Idri, Ali, Abran, Alain et Nassif, Ali Bou.
2018.
« On the value of parameter tuning in heterogeneous ensembles effort estimation ».
Soft Computing, vol. 22, nº 18.
pp. 5977-6010.
Huh, Kyung In, Baraër, Michel, Mark, Bryan G. et Ahn, Yushin.
2018.
« Evaluating glacier volume changes since the little ice age maximum and consequences for stream flow by integrating models of glacier flow and hydrology in the Cordillera Blanca, Peruvian Andes ».
Water, vol. 10, nº 12.
Idri, Ali, Abnane, Ibtissam et Abran, Alain.
2018.
« Evaluating Pred(p) and standardized accuracy criteria in software development effort estimation ».
Journal of Software: Evolution and Process, vol. 30, nº 4.
Idri, Ali, Abnane, Ibtissam et Abran, Alain.
2018.
« Support vector regression-based imputation in analogy-based software development effort estimation ».
Journal of Software: Evolution and Process, vol. 30, nº 12.
e2114.
Ijaz, M. F., Zhukova, Y., Konopatsky, A., Dubinskiy, S., Korobkova, A., Pustov, Y., Brailovski, V. et Prokoshkin, S..
2018.
« Effect of Ta addition on the electrochemical behavior and functional fatigue life of metastable Ti-Zr-Nb based alloy for indwelling implant applications ».
Journal of Alloys and Compounds, vol. 748.
pp. 51-56.
Il, Alexandre, Chatelain, Jean-François, Lalonde, Jean-François, Balazinski, Marek et Rimpault, Xavier.
2018.
« An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling ».
International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4.
pp. 413-426.
Isman, Margaux, Archambault, Maude, Racette, Patricia, Konga, Charles Noel, Llaque, Roxana Miranda, Lin, David, Iha, Katsunori et Ouellet-Plamondon, Claudiane M..
2018.
« Ecological Footprint assessment for targeting climate change mitigation in cities: A case study of 15 Canadian cities according to census metropolitan areas ».
Journal of Cleaner Production, vol. 174.
pp. 1032-1043.
Issa, Mohamad, Fiset, Jean, Mobarra, Mohammadjavad, Ibrahim, Hussein et Ilinca, Adrian.
2018.
« Optimizing the performance of 500kW diesel generator: Impact of the eo-synchro on fuel consumption and greenhouse gas ».
Power Engineer, vol. 22, nº 2.
Jabbarzadeh, Armin, Fahimnia, Behnam et Sabouhi, Fatemeh.
2018.
« Resilient and sustainable supply chain design: Sustainability analysis under disruption risks ».
International Journal of Production Research, vol. 56, nº 17.
pp. 5945-5968.
Jabbarzadeh, Armin, Haughton, Michael et Khosrojerdi, Amir.
2018.
« Closed-loop supply chain network design under disruption risks: A robust approach with real world application ».
Computers and Industrial Engineering, vol. 116.
pp. 178-191.
Jameel, Furqan, Wyne, Shurjeel, Jayakody, Dushantaha Nalin K., Kaddoum, Georges et O'Kennedy, Richard.
2018.
« Wireless social networks: A survey of recent advances, applications and challenges ».
[Article scientifique]. IEEE Access, vol. 6.
pp. 59589-59617.
Javadi, Alireza, Woodward, Lyne et Al-Haddad, Kamal.
2018.
« Real-time implementation of a three-phase THSeAF Based on VSC and P+R controller to improve power quality of weak distribution systems ».
IEEE Transactions on Power Electronics, vol. 33, nº 3.
pp. 2073-2082.
Jebali, Chokri et Kouki, Ammar B..
2018.
« Read range/rate improvement of LF RFID-based tracking systems ».
IEEE Journal of Radio Frequency Identification, vol. 2, nº 2.
pp. 73-79.
Jetté, Bruno, Brailovski, Vladimir, Dumas, Mathieu, Simoneau, Charles et Terriault, Patrick.
2018.
« Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 77.
pp. 58-72.
Jetté, Bruno, Brailovski, Vladimir, Simoneau, Charles, Dumas, Mathieu et Terriault, Patrick.
2018.
« Development and in vitro validation of a simplified numerical model for the design of a biomimetic femoral stem ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 77.
pp. 539-550.
Jobidon, Gabriel, Lemieux, Pierre et Beauregard, Robert.
2018.
« Implementation of integrated project delivery in Quebec's procurement for public infrastructure: A comparative and relational perspective ».
Sustainability, vol. 10, nº 8.
Jolicoeur, Pierre, Lina, Jean-Marc, Drisdelle, Brandi Lee, Koch, Iring, Collard, Guillaume, Eben, Charlotte et Nolden, Sophie.
2018.
« Mechanisms of attentional control in switching foveal and peripheral foci: Evidence from erps and phase synchrony ».
[Article de conférence]. Psychophysiology, vol. 55, nº Suppl. 1.
S12.
Jolliet, Olivier, Antón, Assumpció, Boulay, Anne-Marie, Cherubini, Francesco, Fantke, Peter, Levasseur, Annie, McKone, Thomas E., Michelsen, Ottar, Milà I Canals, Llorenç, Motoshita, Masaharu, Pfister, Stephan, Verones, Francesca, Vigon, Bruce et Frischknecht, Rolf.
2018.
« Global guidance on environmental life cycle impact assessment indicators: impacts of climate change, fine particulate matter formation, water consumption and land use ».
International Journal of Life Cycle Assessment, vol. 23, nº 11.
pp. 2189-2207.
Ka, Ibrahima, Asuo, Ivy M., Basu, Suchismita, Fourmont, Paul, Gedamu, Dawit M., Pignolet, Alain, Cloutier, Sylvain G. et Nechache, Riad.
2018.
« Hysteresis-Free 1D network mixed halide-perovskite semitransparent solar cells ».
Small, vol. 14, nº 38.
Ka, Ibrahima, Gerlein, Luis F., Asuo, Ivy M., Nechache, Riad et Cloutier, Sylvain G..
2018.
« An ultra-broadband perovskite-PbS quantum dot sensitized carbon nanotube photodetector ».
Nanoscale, vol. 10, nº 19.
pp. 9044-9052.
Kali, Yassine, Saad, Maarouf et Benjelloun, Khalid.
2018.
« Optimal super-twisting algorithm with time delay estimation for robot manipulators based on feedback linearization ».
Robotics and Autonomous Systems, vol. 108.
pp. 87-99.
Kali, Yassine, Saad, Maarouf, Benjelloun, Khalid et Khairallah, Charles.
2018.
« Super-twisting algorithm with time delay estimation for uncertain robot manipulators ».
Nonlinear Dynamics, vol. 93, nº 2.
pp. 557-569.
Kammegne, Michel Joel Tchatchueng, Tondji, Yvan, Botez, Ruxandra Mihaela, Grigorie, Lucian Teodor, Mamou, Mahmoud et Mébarki, Youssef.
2018.
« New control methodology for a morphing wing demonstrator ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 232, nº 8.
pp. 1479-1494.
Kanso, Ali, Gherbi, Abdelouahed et Lemieux, Yves.
2018.
« Middleware-managed high availability for cloud applications ».
International Journal of Information and Communication Technology, vol. 12, nº 1-2.
pp. 186-208.
Kanthabhabha Jeya, Rahul et Bouzid, Abdel-Hakim.
2018.
« Compression creep and thermal ratcheting behavior of High Density Polyethylene (HDPE) ».
Polymers, vol. 10, nº 2.
Karabibene, N., Chatelain, J-F., Beauchamp, Y. et Lebrun, G..
2018.
« Effect of machining parameters on the uncut fibers of a unidirectional flax fiber reinforced composite ».
Journal of Management and Engineering Integration, vol. 11, nº 1.
Kaur, Kuljeet, Garg, Sahil, Aujla, Gagangeet Singh, Kumar, Neeraj, Rodrigues, Joel J. P. C. et Guizani, Mohsen.
2018.
« Edge computing in the industrial internet of things environment: Software-defined-networks-based edge-cloud interplay ».
IEEE Communications Magazine, vol. 56, nº 2.
pp. 44-51.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2018.
« Leak prediction through porous compressed packing rings: A comparison study ».
International Journal of Pressure Vessels and Piping, vol. 166.
pp. 1-8.
Kebir, Anouer, Woodward, Lyne et Akhrif, Ouassima.
2018.
« Extremum-seeking control with adaptive excitation: application to a photovoltaic system ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 3.
pp. 2507-2517.
Kebir, Gul Filiz Tchoketch, Larbes, Cherif, Ilinca, Adrian, Obeidi, Thameur et Kebir, Selma Tchoketch.
2018.
« Study of the intelligent behavior of a maximum photovoltaic energy tracking fuzzy controller ».
Energies, vol. 11, nº 12.
Kelly, S., Jahanshad, N., Zalesky, A., Kochunov, P., Agartz, I., Alloza, C., Andreassen, O. A., Arango, C., Banaj, N., Bouix, S., Bousman, C. A., Brouwer, R. M., Bruggemann, J., Bustillo, J., Cahn, W., Calhoun, V., Cannon, D., Carr, V., Catts, S., Chen, J., Chen, J. X., Chen, X., Chiapponi, C., Cho, K. K., Ciullo, V., Corvin, A. S., Crespo-Facorro, B., Cropley, V., De Rossi, P., Diaz-Caneja, C. M., Dickie, E. W., Ehrlich, S., Fan, F. M., Faskowitz, J., Fatouros-Bergman, H., Flyckt, L., Ford, J. M., Fouche, J. P., Fukunaga, M., Gill, M., Glahn, D. C., Gollub, R., Goudzwaard, E. D., Guo, H., Gur, R. E., Gur, R. C., Gurholt, T. P., Hashimoto, R., Hatton, S. N., Henskens, F. A., Hibar, D. P., Hickie, I. B., Hong, L. E., Horacek, J., Howells, F. M., Hulshoff Pol, H. E., Hyde, C. L., Isaev, D., Jablensky, A., Jansen, P. R., Janssen, J., Jönsson, E. G., Jung, L. A., Kahn, R. S., Kikinis, Z., Liu, K., Klauser, P., Knöchel, C., Kubicki, M., Lagopoulos, J., Langen, C., Lawrie, S., Lenroot, R. K., Lim, K. O., Lopez-Jaramillo, C., Lyall, A., Magnotta, V., Mandl, R. C. W., Mathalon, D. H., McCarley, R. W., McCarthy-Jones, S., McDonald, C., McEwen, S., McIntosh, A., Melicher, T., Mesholam-Gately, R. I., Michie, P. T., Mowry, B., Mueller, B. A., Newell, D. T., O'Donnell, P., Oertel-Knöchel, V., Oestreich, L., Paciga, S. A., Pantelis, C., Pasternak, O., Pearlson, G., Pellicano, G. R., Pereira, A. et Pineda Zapata et al., J..
2018.
« Widespread white matter microstructural differences in schizophrenia across 4322 individuals: Results from the ENIGMA Schizophrenia DTI Working Group ».
Molecular Psychiatry, vol. 23, nº 5.
pp. 1261-1269.
Khadra, Christelle, Ballard, Ariane, Déry, Johanne, Paquin, David, Fortin, Jean-Simon, Perreault, Isabelle, Labbé, David R., Hoffman, Hunter G., Bouchard, Stéphane et LeMay, Sylvie.
2018.
« Projector-based virtual reality dome environment for procedural pain and anxiety in young children with burn injuries: A pilot study ».
Journal of Pain Research, vol. 11.
pp. 343-353.
Khanjarpanah, Hossein, Jabbarzadeh, Armin et Seyedhosseini, Seyed Mohammad.
2018.
« A novel multi-period double frontier network DEA to sustainable location optimization of hybrid wind-photovoltaic power plant with real application ».
Energy Conversion and Management, vol. 159.
pp. 175-188.
Khasawneh, Samer et Kadoch, Michel.
2018.
« Hybrid cryptography algorithm with precomputation for advanced metering infrastructure networks ».
Mobile Networks and Applications, vol. 23, nº 4.
pp. 982-993.
Khay, M., Ngo, A. D. et Ganesan, R..
2018.
« Experimental investigation and phenomenological modeling of hygrothermal effect on tensile fatigue behavior of carbon/epoxy plain weave laminates ».
Journal of Composite Materials, vol. 52, nº 27.
pp. 3803-3818.
Khebir, Ahmed, Dłotko, Pawel, Kapidani, Bernard, Kouki, Ammar et Specogna, Ruben.
2018.
« T-Ω Formulation with higher-order hierarchical basis functions for nonsimply connected conductors ».
Mathematical Problems in Engineering, vol. 2018.
Khodaei, Hamid et Terriault, Patrick.
2018.
« Experimental validation of shape memory material model implemented in commercial finite element software under multiaxial loading ».
Journal of Intelligent Material Systems and Structures, vol. 29, nº 14.
pp. 2954-2965.
Khreich, Wael, Murtaza, Syed Shariyar, Hamou-Lhadj, Abdelwahab et Talhi, Chamseddine.
2018.
« Combining heterogeneous anomaly detectors for improved software security ».
Journal of Systems and Software, vol. 137.
pp. 415-429.
Kibouka, Guy Richard, Nganga-Kouya, Donatien, Kenné, Jean-Pierre, Polotski, Vladimir et Songmene, Victor.
2018.
« Maintenance and setup planning in manufacturing systems under uncertainties ».
Journal of Quality in Maintenance Engineering, vol. 24, nº 2.
pp. 170-184.
Kilani, Moez Ben, Gagnon, Ghyslain et Gagnon, François.
2018.
« Multistatic radar placement optimization for cooperative radar-communication systems ».
IEEE Communications Letters, vol. 22, nº 8.
pp. 1576-1579.
Kim, Dong-Geun, Moosavi-Khoonsari, Elmira et Jung, In-Ho.
2018.
« Thermodynamic modeling of the K2O-Al2O3 and K2O-MgO-Al2O3 systems with emphasis on β- and βʹʹ-aluminas ».
Journal of the European Ceramic Society, vol. 38, nº 9.
pp. 3188-3200.
Klotz, T., Delbergue, D., Bocher, P., Levesque, M. et Brochu, M..
2018.
« Surface characteristics and fatigue behavior of shot peened Inconel 718 ».
International Journal of Fatigue, vol. 110.
pp. 10-21.
Kolobova, A. Yu, Ryklina, E. P., Prokoshkin, S. D., Inaekyan, K. E. et Brailovskii, V..
2018.
« Study of the evolution of the structure and kinetics of martensitic transformations in a titanium nickelide upon isothermal annealing after hot helical rolling ».
Physics of Metals and Metallography, vol. 119, nº 2.
pp. 134-145.
Kong, Long et Kaddoum, Georges.
2018.
« On physical layer security over the fisher-snedecor f wiretap fading channels ».
IEEE Access, vol. 6.
pp. 39466-39472.
Kong, Long, Kaddoum, Georges et da Costa, Daniel Benevides.
2018.
« Cascaded α-μ : Fading channels: Reliability and security analysis ».
IEEE Access, vol. 6.
pp. 41978-41992.
Kong, Long, Kaddoum, Georges et Rezki, Zouheir.
2018.
« Highly accurate and asymptotic analysis on the SOP over SIMO α-μ fading channels ».
IEEE Communications Letters, vol. 22, nº 10.
pp. 2088-2091.
Kong, Long, Vuppala, Satyanarayana et Kaddoum, Georges.
2018.
« Secrecy analysis of random MIMO wireless networks over α-μ fading channels ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 12.
pp. 11654-11666.
Konishi, J., del Re, E. C., Bouix, S., Blokland, G. A. M., Mesholam-Gately, R., Woodberry, K., Niznikiewicz, M., Goldstein, J., Hirayasu, Y., Petryshen, T. L., Seidman, L. J., Shenton, M. E. et McCarley, R. W..
2018.
« Abnormal relationships between local and global brain measures in subjects at clinical high risk for psychosis: A pilot study ».
Brain Imaging and Behavior, vol. 12, nº 4.
pp. 974-988.
Kreitcberg, A., Brailovski, V. et Prokoshkin, S..
2018.
« New biocompatible near-beta Ti-Zr-Nb alloy processed by laser powder bed fusion: Process optimization ».
Journal of Materials Processing Technology, vol. 252.
pp. 821-829.
Kuester, Scheyla, Barra, Guilherme M. O. et Demarquette, Nicole R..
2018.
« Morphology, mechanical properties and electromagnetic shielding effectiveness of poly(styrene-b-ethylene-ran-butylene-b-styrene)/carbon nanotube nanocomposites: effects of maleic anhydride, carbon nanotube loading and processing method ».
Polymer International, vol. 67, nº 9.
pp. 1229-1240.
Kula, Raula Gaikovina, German, Daniel M., Ouni, Ali, Ishio, Takashi et Inoue, Katsuro.
2018.
« Do developers update their library dependencies?: An empirical study on the impact of security advisories on library migration ».
Empirical Software Engineering, vol. 23, nº 1.
pp. 384-417.
Kula, Raula Gaikovina, Ouni, Ali, German, Daniel M. et Inoue, Katsuro.
2018.
« An empirical study on the impact of refactoring activities on evolving client-used APIs ».
Information and Software Technology, vol. 93.
pp. 186-199.
Kumar, Kuldeep, Toews, Matthew, Chauvin, Laurent, Colliot, Olivier et Desrosiers, Christian.
2018.
« Multi-modal brain fingerprinting: A manifold approximation based framework ».
NeuroImage, vol. 183.
pp. 212-226.
Kurusu, Rafael S., Helal, Emna, Moghimian, Nima, David, Eric et Demarquette, Nicole.
2018.
« The role of selectively located commercial graphene nanoplatelets in the electrical properties, morphology, and stability of EVA/LLDPE blends ».
Macromolecular Materials and Engineering, vol. 303, nº 9.
Laaouatni, Amine, Martaj, Nadia, Bennacer, Rachid, El Omari, Mohamed, Bin, Liu, El Ganaoui, Mohammed et Merabtine, Abdelatif.
2018.
« Integration of the PCM with intra-ventilation for improved thermal and inertial characteristics of the building envelope ».
EPJ Applied Physics, vol. 84, nº 3.
Lachance-Tremblay, Eric, Perraton, Daniel, Vaillancourt, Michel et Di Benedetto, Herve.
2018.
« Effect of hydrated lime on linear viscoelastic properties of asphalt mixtures with glass aggregates subjected to freeze-thaw cycles ».
Construction and Building Materials, vol. 184.
pp. 58-67.
Lalonde, Sébastien, Guilbault, Raynald et Langlois, Sébastien.
2018.
« Numerical analysis of ACSR conductor-clamp systems undergoing wind-induced cyclic loads ».
IEEE Transactions on Power Delivery, vol. 33, nº 4.
pp. 1518-1526.
Lamalice, Annie, Haillot, Didier, Lamontagne, Marc-André, Herrmann, Thora Martina, Gibout, Stéphane, Blangy, Sylvie, Martin, Jean-Louis, Coxam, Véronique, Arsenault, Julien, Munro, Lara et Courchesne, François.
2018.
« Building food security in the canadian arctic through the development of sustainable community greenhouses and gardening ».
Écoscience, vol. 25, nº 4.
pp. 325-341.
Lamarche, Louis, Raymond, Jasmin et Koubikana Pambou, Claude.
2018.
« Evaluation of the internal and borehole resistances during thermal response tests and impact on ground heat exchanger design ».
Energies, vol. 11, nº 1.
Landau, Kurt, Nadeau, Sylvie et LeFloch, Tiphaine.
2018.
« Development of the Ergonomic Activity Sampling (EAS) method to analyse video-documented work processes with activity sampling ».
Ergonomics International Journal, vol. 2, nº 4.
Lapalme, Denis, Halter, Fabien, Mounaim-Rousselle, Christine et Seers, Patrice.
2018.
« Characterization of thermodiffusive and hydrodynamic mechanisms on the cellular instability of syngas fuel blended with CH4 or CO2 ».
Combustion and Flame, vol. 193.
pp. 481-490.
Lapointe, Mathieu et Barbeau, Benoit.
2018.
« Selection of media for the design of ballasted flocculation processes ».
Water Research, vol. 147.
pp. 25-32.
Laporte, Catherine et Ménard, Lucie.
2018.
« Multi-hypothesis tracking of the tongue surface in ultrasound video recordings of normal and impaired speech ».
Medical Image Analysis, vol. 44.
pp. 98-114.
Laporte, Claude Y., Munoz, Mirna, Miranda, Jezreel Mejia et O’Connor, Rory V..
2018.
« Applying software engineering standards in very small entities: From startups to grownups ».
IEEE Software, vol. 35, nº 1.
pp. 99-103.
Lara, Jorge et Chandra, Ambrish.
2018.
« Performance investigation of two novel HSFSI demodulation algorithms for encoderless FOC of PMSMs intended for EV propulsion ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 2.
pp. 1074-1083.
Laventure, Samuel, Pinsard, Basile, Lungu, Ovidiu, Carrier, Julie, Fogel, Stuart, Benali, Habib, Lina, Jean-Marc, Boutin, Arnaud et Doyon, Julien.
2018.
« Beyond spindles: interactions between sleep spindles and boundary frequencies during cued reactivation of motor memory representations ».
Sleep, vol. 41, nº 9.
Le, Thanh-Dat, Kaddoum, Georges et Shin, Oh-Soon.
2018.
« Joint channel resources allocation and beamforming in energy harvesting systems ».
IEEE Wireless Communications Letters, vol. 7, nº 5.
pp. 884-887.
Leclère, Jérôme, Landry, René et Botteron, Cyril.
2018.
« Comparison of L1 and L5 bands GNSS signals acquisition ».
Sensors, vol. 18, nº 9.
Lee, J., Chon, M. W., Kim, H., Rathi, Y., Bouix, S., Shenton, M. E. et Kubicki, M..
2018.
« Diagnostic value of structural and diffusion imaging measures in schizophrenia ».
NeuroImage: Clinical, vol. 18.
pp. 467-474.
Lee, Kangjoo, Khoo, Hui Ming, Lina, Jean-Marc, Dubeau, François, Gotman, Jean et Grova, Christophe.
2018.
« Disruption, emergence and lateralization of brain network hubs in mesial temporal lobe epilepsy ».
NeuroImage: Clinical, vol. 20.
pp. 71-84.
Léger, Étienne, Reyes, Jonatan, Drouin, Simon, Collins, D. Louis, Popa, Tiberiu et Kersten-Oertel, Marta.
2018.
« Gesture-based registration correction using a mobile augmented reality image-guided neurosurgery system ».
Healthcare Technology Letters, vol. 5, nº 5.
pp. 137-142.
Léger, Jérémie, Rousse, Daniel R., Le Borgne, Kilian et Lassue, Stéphane.
2018.
« Comparing electric heating systems at equal thermal comfort: An experimental investigation ».
Building and Environment, vol. 128.
pp. 161-169.
Lemonnier, D., Mac-Thiong, J. M. et Bélanger, P..
2018.
« Ultrasound plane wave doppler quantification using a wall-less spinal cord representative phantom ».
Acta Acustica united with Acustica, vol. 104, nº 1.
pp. 166-173.
Lepage, C., de Pierrefeu, A., Koerte, I. K., Coleman, M. J., Pasternak, O., Grant, G., Marx, C. E., Morey, R. A., Flashman, L. A., George, M. S., McAllister, T. W., Andaluz, N., Shutter, L., Coimbra, R., Zafonte, R. D., Stein, M. B., Shenton, M. E. et Bouix, S..
2018.
« White matter abnormalities in mild traumatic brain injury with and without post-traumatic stress disorder: A subject-specific diffusion tensor imaging study ».
Brain Imaging and Behavior, vol. 12, nº 3.
pp. 870-881.
Lepercq, Etienne, Blaquière, Yves et Savaria, Yvon.
2018.
« A pattern-based routing algorithm for a novel electronic system prototyping platform ».
Integration, vol. 62.
pp. 224-237.
Li, Wenchao, Vu, Viet-Hung, Liu, Zhaoheng, Thomas, Marc et Hazel, Bruce.
2018.
« Extraction of modal parameters for identification of time-varying systems using data-driven stochastic subspace identification ».
Journal of Vibration and Control, vol. 24, nº 20.
pp. 4781-4796.
Li, Xiaokai, Andrews, Sheldon, Jones, Ben et Bargteil, Adam.
2018.
« Energized rigid body fracture ».
Proceedings of the ACM on Computer Graphics and Interactive Techniques, vol. 1, nº 1.
Liu, Heli, Liu, Huaiju, Bocher, Philippe, Zhu, Caichao et Sun, Zhangdong.
2018.
« Effects of case hardening properties on the contact fatigue of a wind turbine gear pair ».
International Journal of Mechanical Sciences, vol. 141.
pp. 520-527.
Liu, Zhaoheng, Chung, Kwok-wai et Wang, Wei.
2018.
« A perturbed nonlinear model of an articulated vehicle with driver control ».
Chaotic Modeling and Simulation, nº 3.
pp. 295-304.
Lizotte-Latendresse, Simon et Beauregard, Yvan.
2018.
« Implementing self-service business analytics supporting lean manufacturing: A state-of-the-art review ».
[Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 11.
pp. 1143-1148.
Lopez-Herrejon, Roberto Erick, Illescas, Sheny et Egyed, Alexander.
2018.
« A systematic mapping study of information visualization for software product line engineering ».
Journal of Software: Evolution and Process, vol. 30, nº 2.
Louafi, Habib, Coulombe, Stéphane et Cheriet, Mohamed.
2018.
« A TOPSIS-based QoE model for adapted content selection of slide documents ».
Multimedia Tools and Applications, vol. 77, nº 20.
pp. 26741-26768.
Loucif, Abdelhalim, Ben Fredj, Emna, Harris, Nathan, Shahriari, Davood, Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe.
2018.
« Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ».
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 49, nº 3.
pp. 1046-1055.
Loucif, Abdelhalim, Bitterlin, Matthieu, Jahazi, Mohammad, Tremblay, Rami, Morin, Jean-Benoît et Lapierre-Boire, Louis-Philippe.
2018.
« Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ».
Metallography, Microstructure, and Analysis, vol. 7, nº 2.
pp. 203-208.
Luo, Jie, Frisken, Sarah, Machado, Ines, Zhang, Mlaomlao, Pieper, Steve, Golland, Polina, Toews, Matthew, Unadkat, Prashln, Sedghi, Alireza, Zhou, Haoyln, Mehrtash, Alireza, Preiswerk, Frank, Cheng, Cheng-Chleh, Golby, Alexandra, Sugiyama, Masashi et Wells, William M. III.
2018.
« Using the variogram for vector outlier screening: application to feature-based image registration ».
International Journal of Computer Assisted Radiology and Surgery, vol. 13, nº 12.
pp. 1871-1880.
Luong, Phuong, Gagnon, François, Despins, Charles et Tran, Le-Nam.
2018.
« Joint virtual computing and radio resource allocation in limited fronthaul green C-RANs ».
IEEE Transactions on Wireless Communications, vol. 17, nº 4.
pp. 2602-2617.
Lyassami, Mountadar, Shahriari, Davood, Ben Fredj, Emna, Morin, Jean-Benoit et Jahazi, Mohammad.
2018.
« Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Lyazidi, Mohammed Yazid, Aitsaadi, Nadjib et Langar, Rami.
2018.
« A dynamic resource allocation framework in LTE downlink for Cloud-Radio Access Network ».
Computer Networks, vol. 140.
pp. 101-111.
Ma, Lingyue, Dugnani, Roberto et Zednik, Ricardo.
2018.
« Quantifying the accuracy of fractographic strength estimates in silicate glasses ».
Journal of the European Ceramic Society, vol. 38, nº 10.
pp. 3643-3649.
Ma, Yan, Moosavi-Khoonsari, Elmira, Kero, Ida T. et Tranell, Gabriella M..
2018.
« Element distribution in the silicomanganese production process ».
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 49, nº 5.
pp. 2444-2457.
Machado, A., Cai, Z., Pellegrino, G., Marcotte, O., Vincent, T., Lina, J. M., Kobayashi, E. et Grova, C..
2018.
« Optimal positioning of optodes on the scalp for personalized functional near-infrared spectroscopy investigations ».
Journal of Neuroscience Methods, vol. 309.
pp. 91-108.
Machado, Inês, Toews, Matthew, Luo, Jie, Unadkat, Pashin, Essayed, Walid, George, Elizabeth, Teodoro, Pedro, Carvalho, Herculano, Martins, Jorge, Golland, Polina, Pieper, Steve, Frisken, Sarah, Golby, Alexandra et Wells, William III.
2018.
« Non-rigid registration of 3D ultrasound for neurosurgery using automatic feature detection and matching ».
International Journal of Computer Assisted Radiology and Surgery, vol. 13, nº 10.
pp. 1525-1538.
Mahoutian, Mehrdad, Chaallal, Omar et Shao, Yixin.
2018.
« Pilot production of steel slag masonry blocks ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 45, nº 7.
pp. 537-546.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2018.
« Finite element simulation of high-speed blow forming of an automotive component ».
Metals, vol. 8, nº 11.
Malekloo, Mohammad-Hossein, Kara, Nadjia et El Barachi, Mary.
2018.
« An energy efficient and SLA compliant approach for resource allocation and consolidation in cloud computing environments ».
Sustainable Computing: Informatics and Systems, vol. 17.
pp. 9-24.
Marani, Mohsen, Songmene, Victor, Kouam, Jules et Zedan, Yasser.
2018.
« Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg 2Si-2Cu metal matrix composite with modifier elements ».
International Journal of Advanced Manufacturing Technology, vol. 99, nº 1-4.
pp. 789-802.
Martel, Jean-Luc, Mailhot, Alain, Brissette, François et Caya, Daniel.
2018.
« Role of natural climate variability in the detection of anthropogenic climate change signal for mean and extreme precipitation at local and regional scales ».
Journal of Climate, vol. 31, nº 11.
pp. 4241-4263.
Martin, Alexis et Voix, Jérémie.
2018.
« In-ear audio wearable: Measurement of heart and breathing rates for health and safety monitoring ».
IEEE Transactions on Biomedical Engineering, vol. 65, nº 6.
pp. 1256-1263.
Mas, Alexandre, Baraer, Michel, Arsenault, Richard, Poulin, Annie et Prefontaine, Jonathan.
2018.
« Targeting high robustness in snowpack modeling for Nordic hydrological applications in limited data conditions ».
Journal of Hydrology, vol. 564.
pp. 1008-1021.
Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2018.
« Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ».
Journal of Manufacturing Processes, vol. 34, part A.
pp. 86-95.
Masoumi, F., Thebaud, L., Shahriari, D., Jahazi, M., Cormier, J., Devaux, A. et Flipo, B. C. D..
2018.
« High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ».
Materials Science and Engineering: A, vol. 710.
pp. 214-226.
Matar, Georges, Lina, Jean-Marc, Carrier, Julie et Kaddoum, Georges.
2018.
« Unobtrusive sleep monitoring using cardiac, breathing and movements activities: an exhaustive review ».
IEEE Access, vol. 6.
pp. 45129-45152.
Mazyan, W. I., Ahmadi, A., Brinkerhoff, J., Ahmed, H. et Hoorfar, M..
2018.
« Enhancement of cyclone solid particle separation performance based on geometrical modification: Numerical analysis ».
Separation and Purification Technology, vol. 191.
pp. 276-285.
McGrath, Heather, Bourgon, Jean-François, Proulx-Bourque, Jean-Samuel, Nastev, Miroslav et Abo El Ezz, Ahmad.
2018.
« A comparison of simplified conceptual models for rapid web-based flood inundation mapping ».
Natural Hazards, vol. 93, nº 2.
pp. 905-920.
Mebarki, Fouzia et David, Eric.
2018.
« Dielectric characterization of thermally aged recycled Polyethylene Terephthalate and Polyethylene Naphthalate reinforced with inorganic fillers ».
Polymer Engineering and Science, vol. 58, nº 5.
pp. 701-712.
Mekki, Ibrahim El Khalil, Bouhamida, Mohamed et Saad, Maarouf.
2018.
« Robust control of a chemical multivariable system in the presence of strong uncertainties in the model parameters ».
International Review of Automatic Control, vol. 11, nº 4.
pp. 166-173.
Melero, C., Rincón, R., Muñoz, J., Zhang, G., Sun, S., Perez, A., Royuela, O., González-Gago, C. et Calzada, M. D..
2018.
« Scalable graphene production from ethanol decomposition by microwave argon plasma torch ».
Plasma Physics and Controlled Fusion, vol. 60, nº 1.
Menage, Delphine, Lemaire, Romain et Seers, Patrice.
2018.
« Experimental study and chemical reactor network modeling of the high heating rate devolatilization and oxidation of pulverized bituminous coals under air, oxygen-enriched combustion (OEC) and oxy-fuel combustion (OFC) ».
Fuel Processing Technology, vol. 177.
pp. 179-193.
Merabtine, Abdelatif, Gardan, Nicolas, Gardan, Julien, Badreddine, Houssem, Zhang, Chuan, Zhu, Feng et Gong, Xiao-Lu.
2018.
« Experimental and numerical thermal analysis of open-cell metal foams developed through a topological optimization and 3D printing process? ».
EPJ Applied Physics, vol. 83, nº 1.
Merabtine, Abdelatif, Maalouf, Chadi, Al Waheed Hawila, Abed, Martaj, Nadia et Polidori, Guillaume.
2018.
« Building energy audit, thermal comfort, and IAQ assessment of a school building: A case study ».
Building and Environment, vol. 145.
pp. 62-76.
Merabtine, Abdelatif, Mokraoui, Salim, Kheiri, Abdelhamid, Dars, Anass et Hawila, Abed Al Waheed.
2018.
« Experimental and multidimensional numerical analysis of the thermal behavior of an anhydrite radiant slab floor heating system: A multi-objective sensitivity study ».
Energy and Buildings, vol. 174.
pp. 619-634.
Mezghani, Neila, Mechmeche, Imene, Mitiche, Amar, Ouakrim, Youssef et de Guise, Jacques A..
2018.
« An analysis of 3D knee kinematic data complexity in knee osteoarthritis and asymptomatic controls ».
PLoS ONE, vol. 13, nº 10.
Meziani, Salim, Zarour, Djamal et Thomas, Marc.
2018.
« Experimental studies for bearings degradation monitoring at an early stage using analysis of variance ».
Diagnostyka, vol. 19, nº 4.
pp. 81-87.
Mhiri, Mohamed, Abuelwafa, Sherif, Desrosiers, Christian et Cheriet, Mohamed.
2018.
« Hierarchical representation learning using spherical k-means for segmentation-free word spotting ».
Pattern Recognition Letters, vol. 101.
pp. 52-59.
Mhiri, Mohamed, Desrosiers, Christian et Cheriet, Mohamed.
2018.
« Convolutional pyramid of bidirectional character sequences for the recognition of handwritten words ».
Pattern Recognition Letters, vol. 111.
pp. 87-93.
Michaud, Francois, Dalir, Hamid et Joncas, Simon.
2018.
« Structural design and optimization of an aircraft morphing wing: Composite skin ».
Journal of Aircraft, vol. 55, nº 1.
pp. 195-211.
Milovanoff, Alexandre, Dandres, Thomas, Gaudreault, Caroline, Cheriet, Mohamed et Samson, Réjean.
2018.
« Real-time environmental assessment of electricity use: a tool for sustainable demand-side management programs ».
International Journal of Life Cycle Assessment, vol. 23, nº 10.
pp. 1981-1994.
Miraoui, Moeiz, El-etriby, Sherif, Tadj, Chakib et Abid, Abdulbasit Zaid.
2018.
« A hybrid modular context-aware services adaptation for a smart living room ».
Intelligent Automation and Soft Computing, vol. 24, nº 2.
pp. 299-308.
Mirvakili, Nasibeh, Saleh, Wael, Di Labbio, Giuseppe et Kadem, Lyes.
2018.
« Blood flow downstream of a dysfunctional mechanical heart valve ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 63, nº 13.
p. 382.
Mirzaalian, H., Ning, L., Savadjiev, P., Pasternak, O., Bouix, S., Michailovich, O., Karmacharya, S., Grant, G., Marx, C. E., Morey, R. A., Flashman, L. A., George, M. S., McAllister, T. W., Andaluz, N., Shutter, L., Coimbra, R., Zafonte, R. D., Coleman, M. J., Kubicki, M., Westin, C. F., Stein, M. B., Shenton, M. E. et Rathi, Y..
2018.
« Multi-site harmonization of diffusion MRI data in a registration framework ».
Brain Imaging and Behavior, vol. 12, nº 1.
pp. 284-295.
Mobtaker, Azadeh, Montecinos, Julio, Ouhimmou, Mustapha, Ronnqvist, Mikael et Paquet, Marc.
2018.
« Minimizing spatial dispersion of forest harvest areas using spectral clustering and set covering modelling ».
Canadian Journal of Forest Research, vol. 48, nº 12.
pp. 1563-1576.
Mobtaker, Azadeh, Ouhimmou, Mustapha, Rönnqvist, Mikael et Paquet, Marc.
2018.
« Development of an economically sustainable and balanced tactical forest management plan: a case study in Québec ».
Canadian Journal of Forest Research, vol. 48, nº 2.
pp. 197-207.
Mohafida, Abdelmoula, Ourasseb, Amine Ait, Kenné, Jean-Pierre et Benjellounb, Khalid.
2018.
« Production and corrective maintenance control of a manufacturing system subject to imperfect repairs ».
International Journal of Trend in Research and Development, nº Special issue.
pp. 43-48.
Mohammadian, Neda, Turenne, Sylvain et Brailovski, Vladimir.
2018.
« Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing ».
Journal of Materials Processing Technology, vol. 252.
pp. 728-738.
Mohsenian Hadad Amlashi, Sahar, Vaillancourt, Michel, Carter, Alan et Bilodeau, Jean-Pascal.
2018.
« Resilient modulus of pavement unbound granular materials containing recycled glass aggregate ».
Materials and Structures = Matériaux et Constructions, vol. 51, nº 4.
Mondal, Sanjoy, Ghommam, Jawhar et Saad, Maarouf.
2018.
« Homogeneous finite-time consensus control for higher-order multi-agent systems by full order sliding mode ».
Journal of Systems Science and Complexity, vol. 31, nº 5.
pp. 1186-1205.
Mondoukpè, Lagnika, Hausler, Robert et Glaus, Mathias.
2018.
« Dynamic matrix for an adaptive environment management in mining: a feed-engineering alternative? ».
Environmental Management and Sustainable Development, vol. 7, nº 2.
pp. 193-220.
Monnier, Anne, Lina, Jean-Marc, Dell'Acqua, Roberto, Doro, Mattia, Wu, Lesley et Jolicoeur, Pierre.
2018.
« Intra and inter-hemispheric phase synchronization during visuo-spatial attention deployment and retention in visual work memory ».
[Résumé d'une communication à une conférence]. Psychophysiology, vol. 55, nº Suppl. 1.
S35.
Montecinos, Julio, Ouhimmou, Mustapha et Chauhan, Satyaveer.
2018.
« Waiting-time estimation in walk-in clinics ».
International Transactions in Operational Research, vol. 25, nº 1.
pp. 51-74.
Montecinos, Julio, Ouhimmou, Mustapha, Chauhan, Satyaveer et Paquet, Marc.
2018.
« Forecasting multiple waste collecting sites for the agro-food industry ».
Journal of Cleaner Production, vol. 187.
pp. 932-939.
Morales-Alzate, Luis Fernando, Solano-Vanegas, Clara, Carrillo-Ramos, Angela, Montoya-Torres, Jairo, Fabregat, Ramon et Pavlich-Mariscal, Jaime A..
2018.
« Accomm: Adaptive system for supply network operational planning ».
International Journal of Web Information Systems, vol. 14, nº 1.
pp. 78-106.
Moreau, Stéphane, Sanjosé, Marlène et Magne, Stéphan.
2018.
« Optimization of tonal noise control with flow obstruction ».
Journal of Sound and Vibration, vol. 437.
pp. 264-275.
Morelli, Ben, Hawkins, Troy R., Niblick, Briana, Henderson, Andrew D., Golden, Heather E., Compton, Jana E., Cooter, Ellen J. et Bare, Jane C..
2018.
« Critical review of eutrophication models for life cycle assessment ».
Environmental Science and Technology, vol. 52, nº 17.
pp. 9562-9578.
Morency, François et Beaugendre, Héloïse.
2018.
« Parametric studies of flat plate trajectories using VIC and penalization ».
Modelling and Simulation in Engineering, vol. 2018.
Moreno-Camacho, Carlos A., Montoya-Torres, Jairo R. et Vélez-Gallego, Mario C..
2018.
« A comparison of mixed-integer linear programming models for workforce scheduling with position-dependent processing times ».
Engineering Optimization, vol. 50, nº 6.
pp. 917-932.
Mortazavi, Hashem, Mehrjerdi, Hasan, Saad, Maarouf et Lefebvre, Serge.
2018.
« Distribution power factor monitoring in presence of high RES integration using a modified load encroachment technique ».
IET Renewable Power Generation, vol. 12, nº 7.
pp. 851-858.
Mostafa, Ahmad, Shahriari, Davood, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2018.
« Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ».
International Journal of Advanced Manufacturing Technology, vol. 96, nº 1-4.
pp. 371-385.
Mouradian, Carla, Naboulsi, Diala, Yangui, Sami, Glitho, Roch H., Morrow, Monique J. et Polakos, Paul A..
2018.
« A comprehensive survey on fog computing: state-of-the-art and research challenges ».
IEEE Communications Surveys and Tutorials, vol. 20, nº 1.
pp. 416-464.
Muñoz, Mirna, Mejia, Jezreel et Laporte, Claude Y..
2018.
« Implementación del Estándar ISO/IEC 29110 en Centros de Desarrollo de Software de Universidades Mexicanas: Experiencia del Estado de Zacatecas ».
RISTI - Revista Iberica de Sistemas e Tecnologias de Informacao, nº 29.
pp. 43-54.
Muñoz-Villamizar, Andrés, Santos, Javier, Montoya-Torres, Jairo R. et Jaca, Carmen.
2018.
« Using OEE to evaluate the effectiveness of urban freight transportation systems: A case study ».
International Journal of Production Economics, vol. 197.
pp. 232-242.
Murate, Kosuke, Roshtkhari, Mehraveh Javan, Ropagnol, Xavier et Blanchard, François.
2018.
« Adaptive spatiotemporal optical pulse front tilt using a digital micromirror device and its terahertz application ».
Optics Letters, vol. 43, nº 9.
pp. 2090-2093.
Murrieta-Mendoza, Alejandro, Botez, Ruxandra Mihaela et Bunel, Audric.
2018.
« Four-dimensional aircraft en route optimization algorithm using the artificial bee colony ».
Journal of Aerospace Information Systems, vol. 15, nº 6.
pp. 307-334.
Murrieta-Mendoza, Alejandro, Ternisien, Laurane, Beuze, Bruce et Botez, Ruxandra Mihaela.
2018.
« Aircraft vertical route optimization by beam search and initial search space reduction ».
Journal of Aerospace Information Systems, vol. 15, nº 3.
pp. 157-171.
Nadeau, S. et Landau, K..
2018.
« Utility, advantages and challenges of digital technologies in the manufacturing sector ».
Ergonomics International Journal, vol. 2, nº 6.
Nathan, Jörn, Masson, Christian et Dufresne, Louis.
2018.
« Near-wake analysis of actuator line method immersed in turbulent flow using large-eddy simulations ».
Wind Energy Science, vol. 3, nº 2.
pp. 905-917.
Nazemi, Faranak, Hamel-Akré, Johann et Bocher, Philippe.
2018.
« Modeling of cementite coarsening during tempering of low-alloyed-medium carbon steel ».
Journal of Materials Science, vol. 53, nº 8.
pp. 6198-6218.
Nemchi, Amina, Bouzidane, Ahmed, Thomas, Marc et Abed, Asma.
2018.
« Performance analysis of four-pad hydrostatic squeeze film dampers loaded between pads under laminar and turbulent flow conditions ».
Tribology - Materials, Surfaces and Interfaces, vol. 12, nº 2.
pp. 59-70.
Neto, José Leal D., Yu, Se-Young, Macedo, Daniel F., Nogueira, José Marcos S., Langar, Rami et Secci, Stefano.
2018.
« ULOOF: A user level online offloading framework for mobile edge computing ».
IEEE Transactions on Mobile Computing, vol. 17, nº 11.
pp. 2660-2674.
Nezami, Mohammadreza Sanadgol, Radi, Bahaa, Gour, Amit, Xiong, Yule, Taherzadeh-Sani, Mohammad, Menard, Michaël, Nabki, Frederic et Liboiron-Ladouceur, Odile.
2018.
« Integrated RF passive low-pass filters in silicon photonics ».
IEEE Photonics Technology Letters, vol. 30, nº 23.
pp. 2052-2055.
Nguyen, A.-Q., Amrhar, A., Zambrano, J., Brown, G., Landry, R. Jr. et Yeste, O..
2018.
« Application of phase modulation enabling secure automatic dependent surveillance-broadcast ».
Journal of Air Transportation, vol. 26, nº 4.
pp. 157-170.
Nguyen, A-Q., Amrhar, A., Zambrano, J., Brown, G., Yeste-Ojeda, O. A. et Landry, R. Jr..
2018.
« Application of PSK modulation in ADS-B 1090 extended squitter authentication ».
[Article de conférence]. International Journal of Aerospace and Mechanical Engineering, vol. 12, nº 3.
pp. 238-249.
Nguyen, Duong Tuan, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« NFV-based architecture for the interworking between WebRTC and IMS ».
IEEE Transactions on Network and Service Management, vol. 15, nº 4.
pp. 1363-1377.
Nguyen, Thien Vuong, Le, Xuan Hien, Dao, Phi Hung, Decker, Christian et Nguyen-Tri, Phuong.
2018.
« Stability of acrylic polyurethane coatings under accelerated aging tests and natural outdoor exposure: the critical role of the used photo-stabilizers ».
Progress in Organic Coatings, vol. 124.
pp. 137-146.
Nguyen, Tung Ngoc, Fortin Blanchette, Handy et Wang, Ruxi.
2018.
« General impedance representation of passive devices based on measurement ».
IEEE Transactions on Power Electronics, vol. 33, nº 8.
pp. 6699-6709.
Nguyen-Tri, Phuong, Nguyen, Tuan Anh, Carrière, Pascal et Cuong, Ngo Xuan.
2018.
« Nanocomposite coatings: preparation, characterization, properties and applications ».
International Journal of Corrosion, vol. 2018.
Nguyen-Tri, Phuong et Prud'homme, Robert E..
2018.
« Crystallization and segregation behavior at the submicrometer scale of PCL/PEG blends ».
Macromolecules, vol. 51, nº 18.
7266–7273.
Nguyen-Tri, Phuong et Prud'homme, Robert E..
2018.
« Nanoscale lamellar assembly and segregation mechanism of Poly(3-hydroxybutyrate)/Poly(ethylene glycol) blends ».
Macromolecules, vol. 51, nº 1.
pp. 181-188.
Nguyen-Tri, Phuong, Tuduri, Ludovic, Gauvin, Chantal, Triki, Ennouri et Vu-Khanh, Toan.
2018.
« Swelling behavior of polymeric membranes to metalworking fluids ».
Journal of Applied Polymer Science, vol. 135, nº 3.
Niknam, Seyed Ali, Davoodi, Behnam, Davim, J. Paulo et Songmene, Victor.
2018.
« Mechanical deburring and edge-finishing processes for aluminum partsa review ».
International Journal of Advanced Manufacturing Technology, vol. 95, nº 1-4.
pp. 1101-1125.
Nisol, Bernard, Watson, Sean, Meunier, Anne, Juncker, David, Lerouge, Sophie et Wertheimer, Michael R..
2018.
« Energetics of reactions in a dielectric barrier discharge with argon carrier gas: VI PEG‐like coatings ».
Plasma Processes and Polymers, vol. 15, nº 3.
Nollet, Marie-José, Abo El Ezz, Ahmad, Surprenant, Oliver, Smirnoff, Alex et Nastev, Miroslav.
2018.
« Earthquake magnitude and shaking intensity dependent fragility functions for rapid risk assessment of buildings ».
Geosciences, vol. 8, nº 1.
Northon, Stéphane, Boivin, Karine, Laurencelle, Louis, Hagemeister, Nicola et de Guise, Jacques A..
2018.
« Quantification of joint alignment and stability during a single leg stance task in a knee osteoarthritis cohort ».
The Knee, vol. 25, nº 6.
pp. 1040-1050.
Nour, Mhamed, Renaud, Jean et Gardoni, Mickael.
2018.
« Place of caregiver who accompanies a person with Alzheimer's disease or related, what should be their role ».
Advances in Social Sciences Research Journal, vol. 5, nº 10.
pp. 442-451.
Novelli, M., Bocher, P. et Grosdidier, T..
2018.
« Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment ».
Materials Characterization, vol. 139.
pp. 197-207.
Obeidi, Thameur, Larbes, Cherif, Ilinca, Adrian et Kebir, Gul Filiz Tchoketch.
2018.
« Fuzzy logic-based maximum power point tracking for a solar electric vehicle ».
Acta Polytechnica Hungarica, vol. 15, nº 7.
pp. 133-156.
Olaniyan, Richard, Fadahunsi, Olamilekan, Maheswaran, Muthucumaru et Zhani, Mohamed Faten.
2018.
« Opportunistic edge computing: Concepts, opportunities and research challenges ».
Future Generation Computer Systems, vol. 89.
pp. 633-645.
Olivares-Espinosa, Hugo, Breton, Simon-Philippe, Nilsson, Karl, Masson, Christian, Dufresne, Louis et Ivanell, Stefan.
2018.
« Assessment of turbulence modelling in the wake of an actuator disk with a decaying turbulence inflow ».
Applied Sciences, vol. 8, nº 9.
Oliver, P., Ralchenko, M., Samson, C., Ernst, R. E., McCausland, P. J. A. et West, G. F..
2018.
« Enhanced nondestructive characterization of ordinary chondrites using complex magnetic susceptibility measurements ».
Meteoritics and Planetary Science, vol. 53, nº 3.
pp. 433-447.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2018.
« Joint production and replacement planning for an unreliable manufacturing system subject to random demand and quality ».
[Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 11.
pp. 951-956.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2018.
« Production and replacement policies for a deteriorating manufacturing system under random demand and quality ».
European Journal of Operational Research, vol. 264, nº 2.
pp. 623-636.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2018.
« Stochastic optimal control of random quality deteriorating hybrid manufacturing/remanufacturing systems ».
Journal of Manufacturing Systems, vol. 49.
pp. 172-185.
Ouled Sghaier, Moslem, Hammami, Imen, Foucher, Samuel et Lepage, Richard.
2018.
« Flood extent mapping from time-series sar images based on texture analysis and data fusion ».
Remote Sensing, vol. 10, nº 2.
p. 237.
Pantoja, Francisco G., Songmene, Victor, Kenné, Jean-Pierre, Olufayo, Oluwole A. et Ayomoh, Michael.
2018.
« Development of a tool cost optimization model for stochastic demand of machined products ».
Applied Mathematics, vol. 9, nº 12.
pp. 1395-1423.
Pappas, Georgios, Joncas, Simon, Michaud, Véronique et Botsis, John.
2018.
« The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part I Experimental results ».
Composite Structures, vol. 184.
pp. 924-934.
Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, Hakim.
2018.
« A hybrid PV/T solar evaporator using CO2: Numerical heat transfer model and simulation results ».
Solar Energy, vol. 170.
pp. 1118-1129.
Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis, Nesreddine, Hakim et Talbot, Marie-Hélène.
2018.
« One-dimensional model of a stratified thermal storage tank with supercritical coiled heat exchanger ».
Applied Thermal Engineering, vol. 134.
pp. 379-395.
Pellan Cheng, Alexandre, Burnham, Philip et De Vlaminck, Iwijn.
2018.
« Biopsy-free screening for glioma ».
EMBO molecular medicine, vol. 10, nº 12.
Pellegrino, Giovanni, Hedrich, Tanguy, Chowdhury, Rasheda Arman, Hall, Jeffery A., Dubeau, Francois, Lina, Jean-Marc, Kobayashi, Eliane et Grova, Christophe.
2018.
« Clinical yield of magnetoencephalography distributed source imaging in epilepsy: A comparison with equivalent current dipole method ».
Human Brain Mapping, vol. 39, nº 1.
pp. 218-231.
Pérez-Sánchez, A., Yánez, A., Cuadrado, A., Martel, O. et Nuño, N..
2018.
« Fatigue behaviour and equivalent diameter of single Ti-6Al-4V struts fabricated by electron beam melting orientated to porous lattice structures ».
Materials and Design, vol. 155.
pp. 106-115.
Perraton, Daniel, Di Benedetto, Hervé, Sauzeat, Cedric, Nguyen, Quang Tuan et Pouget, Simon.
2018.
« Three-dimensional linear viscoelastic properties of two bituminous mixtures made with the same binder ».
Journal of Materials in Civil Engineering, vol. 30, nº 11.
Peykani, Pejman, Mohammadi, Emran, Pishvaee, Mir Saman, Rostamy-Malkhalifeh, Mohsen et Jabbarzadeh, Armin.
2018.
« A novel fuzzy data envelopment analysis based on robust possibilistic programming: Possibility, necessity and credibility-based approaches ».
RAIRO - Operations Research, vol. 52, nº 4.
pp. 1445-1463.
Pham, Chuan, Tran, Nguyen H., Ren, Shaolei, Seon Hong, Choong, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« A distributed approach to emergency demand response in geo-distributed mixed-use buildings ».
Journal of Building Engineering, vol. 19.
pp. 506-518.
Picard, François et Miresco, Edmond.
2018.
« Identifying high-probability buy signals ».
Technical Analysis of Stocks & Commodities, vol. 36, nº 13.
pp. 8-12.
Planckaert, Célia, Larose, Gabriel, Ranger, Pierre, Lacelle, Marc, Fuentes, Alexandre et Hagemeister, Nicola.
2018.
« Total knee arthroplasty with unexplained pain: new insights from kinematics ».
Archives of Orthopaedic and Trauma Surgery, vol. 138, nº 4.
pp. 553-561.
Politowski, Cristiano, Fontoura, Lisandra M., Petrillo, Fabio et Guéhéneuc, Yann-Gaël.
2018.
« Learning from the past: A process recommendation system for video game projects using postmortems experiences ».
Information and Software Technology, vol. 100.
pp. 103-118.
Polkowski, Wojciech, Sobczak, Natalia, Nowak, Rafal, Kudyba, Artur, Bruzda, Grzegorz, Polkowska, Adelajda, Homa, Marta, Turalska, Patrycja, Tangstad, Merete, Safarian, Jafar, Moosavi-Khoonsari, Elmira et Datas, Alejandro.
2018.
« Wetting behavior and reactivity of molten silicon with h-BN substrate at ultrahigh temperatures up to 1750C ».
Journal of Materials Engineering and Performance, vol. 27, nº 10.
pp. 5040-5053.
Polotski, Vladimir et Beauregard, Yvan.
2018.
« Work-time identification and effort assessment: Application to fenestration industry and case study? ».
[Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 15.
pp. 569-574.
Poulin, J. R., Brailovski, V. et Terriault, P..
2018.
« Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions ».
International Journal of Fatigue, vol. 116.
pp. 634-647.
Pradhan, Prabin, Sharma, Manish et Ung, Bora.
2018.
« Generation of perfect cylindrical vector beams with complete control over the ring width and ring diameter ».
IEEE Photonics Journal, vol. 10, nº 1.
Proulx, Sébastien.
2018.
« Designing for the vulnerable: MacIntyre’s concept of proxy as ethical framework ».
International Journal of Design in Society, vol. 12, nº 4.
pp. 45-53.
Rahimi Komijania, H, Shahin, M. et Jabbarzadeh, A..
2018.
« Optimal policy of condition-based maintenance considering probabilistic logistic times and environmental contamination issues ».
International Journal of Engineering, Transactions B: Applications, vol. 31, nº 2.
pp. 357-364.
Rahmani, Mohammad Hassan et Deslandes, Dominic.
2018.
« Circularly polarised periodic leaky-wave antenna with filtering capability ».
IET Microwaves, Antennas and Propagation, vol. 12, nº 11.
pp. 1811-1815.
Ralchenko, M., Svilans, M., Samson, C., Walsh, C. et Roper, M..
2018.
« Optimization of through-the-Earth radio communications via mine overburden conductivity estimation ».
Mining Engineering, vol. 70, nº 7.
pp. 113-120.
Ralchenko, Maxim, Roper, Mike, Samson, Claire et Svilans, Markus.
2018.
« Near-field VLF electromagnetic signal propagation in multistory buildings ».
IEEE Transactions on Antennas and Propagation, vol. 66, nº 2.
pp. 848-856.
Ramachandran, Sirinivasan, Ghafourzadeh, Donya, de Lasa, Martin, Popa, Tiberiu et Paquette, Éric.
2018.
« Joint planar parameterization of segmented parts and cage deformation for dense correspondence ».
Computers and Graphics, vol. 74.
pp. 202-212.
Raoofat, M., Saad, M., Lefebvre, S., Asber, D., Mehrjedri, H. et Lenoir, L..
2018.
« Wind power smoothing using demand response of electric vehicles ».
International Journal of Electrical Power and Energy Systems, vol. 99.
pp. 164-174.
Reátegui, Ruth et Ratté, Sylvie.
2018.
« Comparison of MetaMap and cTAKES for entity extraction in clinical notes ».
BMC Medical Informatics and Decision Making, vol. 18, nº supp. 3.
Rehouma, Haythem, Noumeir, Rita, Bouachir, Wassim, Jouvet, Philippe et Essouri, Sandrine.
2018.
« 3D imaging system for respiratory monitoring in pediatric intensive care environment ».
Computerized Medical Imaging and Graphics, vol. 70.
pp. 17-28.
Reimeringer, Michael, Nuño, Natalia et Morin, Suzanne.
2018.
« Atypical femur fractures: influence of the femoral neck shaft angle and lateral bowing on maximum principal strains within the femur ».
[Résumé d'une communication à une conférence]. Journal of Bone and Mineral Research, vol. 33, nº Suppl. 1.
S187.
Rezabeigi, Ehsan, Wood-Adams, Paula M. et Demarquette, Nicole R..
2018.
« Complex morphology formation in electrospinning of binary and ternary poly(lactic acid) solutions ».
Macromolecules, vol. 51, nº 11.
pp. 4094-4107.
Rezkallah, Miloud, Hamadi, Ab, Chandra, Ambrish et Singh, Bhim.
2018.
« Design and implementation of active power control with improved P&O method for wind-pv-battery based standalone generation system ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 7.
pp. 5590-5600.
Režnáková, Marta, Tencer, Lukas et Cheriet, Mohamed.
2018.
« Elastic memory learning for fuzzy inference models ».
Applied Soft Computing, vol. 67.
pp. 1-7.
Riekstin, Ana Carolina, Rodrigues, Bruno Bastos, Nguyen, Kim Khoa, Carvalho, Teresa Cristina Melo De Brito, Meirosu, Catalin, Stiller, Burkhard et Cheriet, Mohamed.
2018.
« A survey on metrics and measurement tools for sustainable distributed cloud networks ».
IEEE Communications Surveys and Tutorials, vol. 20, nº 2.
pp. 1244-1270.
Rimpault, Xavier, Balazinski, Marek et Chatelain, Jean-François.
2018.
« Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0 ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Montaño-Arango, Oscar et Hernández-Gress, Eva Selene.
2018.
« Subcontracting strategies with production and maintenance policies for a manufacturing system subject to progressive deterioration ».
International Journal of Production Economics, vol. 200.
pp. 103-118.
Roberge, Jean-Philippe, Ruotolo, Wilson, Duchaine, Vincent et Cutkosky, Mark.
2018.
« Improving industrial grippers with adhesion-controlled friction ».
IEEE Robotics and Automation Letters, vol. 3, nº 2.
pp. 1041-1048.
Robichaud, Alexandre, Cicek, Paul-Vahé, Deslandes, Dominic et Nabki, Frederic.
2018.
« Frequency tuning technique of piezoelectric ultrasonic transducers for ranging applications ».
Journal of Microelectromechanical Systems, vol. 27, nº 3.
pp. 570-579.
Robichaud, Alexandre, Deslandes, Dominic, Cicek, Paul-Vahe et Nabki, Frederic.
2018.
« A novel topology for process variation-tolerant piezoelectric micromachined ultrasonic transducers ».
Journal of Microelectromechanical Systems, vol. 27, nº 6.
pp. 1204-1212.
Rohoden, Katty, Estrada, Rebeca, Otrok, Hadi et Dziong, Zbigniew.
2018.
« Game theoretical framework for clustering and resource allocation in macro-femtocell networks ».
Computer Networks, vol. 138.
pp. 164-176.
Rong, Bo, Zhou, Jiazhen, Kadoch, Michel et Sun, Gui-Ling.
2018.
« Emerging technologies for 5G radio access network: architecture, physical layer technologies, and MAC layer protocols ».
[Éditorial]. Wireless Communications and Mobile Computing, vol. 2018.
Rosinvil, T., Bouvier, J., Dube, J., Bouchard, M., Gaudreault, P. O., El Gewely, M., Carrier, J. et Lina, J. M..
2018.
« Changes in slow waves density: a matter of aging and sex or an inaccurate detection? ».
[Résumé d'une communication à une conférence]. Journal of Sleep Research, vol. 27, nº Suppl. 1.
p. 91.
Rouhollah Dermanaki, Farahani, Janier, Mathieu et Dubé, Martine.
2018.
« Conductive films of silver nanoparticles as novel susceptors for induction welding of thermoplastic composites ».
Nanotechnology, vol. 29, nº 12.
Roy, Anandarup, Cruz, Rafael M. O., Sabourin, Robert et Cavalcanti, George D. C..
2018.
« A study on combining dynamic selection and data preprocessing for imbalance learning ».
Neurocomputing, vol. 286.
pp. 179-192.
Saad, Y., Younes, R., Abboudi, S. et Ilinca, A..
2018.
« Hydro-pneumatic storage for wind-diesel electricity generation in remote sites ».
Applied Energy, vol. 231.
pp. 1159-1178.
Saboktakin, A., Vu-Khanh, T., Butun, V. et Pantyukhov, P..
2018.
« Characteristics of tufted preforms subjected to different mechanical loading for aerospace applications ».
FME Transactions, vol. 46, nº 2.
pp. 224-229.
Sadeghian Sharif, Nastaran, Pishvaee, Mir Saman, Aliahmadi, Alireza et Jabbarzadeh, Armin.
2018.
« A bi-level programming approach to joint network design and pricing problem in the municipal solid waste management system: A case study ».
Resources, Conservation and Recycling, vol. 131.
pp. 17-40.
Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor.
2018.
« A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions ».
International Journal of Advanced Manufacturing Technology, vol. 96, nº 9-12.
pp. 3747-3791.
Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor.
2018.
« Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel ».
International Journal of Advanced Manufacturing Technology, vol. 94, nº 5-8.
pp. 2457-2474.
Saidi, M. N., Songmene, V., Kouam, J. et Bahloul, A..
2018.
« Rotational and translation-free polishing of granite: surface quality and dust particles emission and dispersion ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 1-4.
pp. 289-303.
Saied, Mohamed Aymen, Ouni, Ali, Sahraoui, Houari, Kula, Raula Gaikovina, Inoue, Katsuro et Lo, David.
2018.
« Improving reusability of software libraries through usage pattern mining ».
Journal of Systems and Software, vol. 145.
pp. 164-179.
Saint-Louis, Patrick et Lapalme, James.
2018.
« An exploration of the many ways to approach the discipline of enterprise architecture ».
International Journal of Engineering Business Management, vol. 10.
Saito, Y., Kubicki, M., Koerte, I., Otsuka, T., Rathi, Y., Pasternak, O., Bouix, S., Eckbo, R., Kikinis, Z., von Hohenberg, C. C., Roppongi, T., Del Re, E., Asami, T., Lee, S. H., Karmacharya, S., Mesholam-Gately, R. I., Seidman, L. J., Levitt, J., McCarley, R. W., Shenton, M. E. et Niznikiewicz, M. A..
2018.
« Impaired white matter connectivity between regions containing mirror neurons, and relationship to negative symptoms and social cognition, in patients with first-episode schizophrenia ».
Brain Imaging and Behavior, vol. 12, nº 1.
pp. 229-237.
Saleem, Essa Abrahim Abdulgader, Dao, Thien-My et Liu, Zhaoheng.
2018.
« Multiple objective optimization and design of series-parallele using novel hybrid genetic algorithm meta-heuristic approach ».
World Journal of Engineering and Technology, vol. 6, nº 3.
pp. 532-555.
Salehani, Yaser Esmaeili, Gazor, Saeed et Cheriet, Mohamed.
2018.
« Sparse hyperspectral unmixing via heuristic ℓp-norm approach ».
IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 11, nº 4.
pp. 1191-1202.
Sanjosé, Marlène et Moreau, Stéphane.
2018.
« Fast and accurate analytical modeling of broadband noise for a low-speed fan ».
Journal of the Acoustical Society of America, vol. 143, nº 5.
pp. 3103-3113.
Santos, Ivan Viveros, Bulle, Cécile, Levasseur, Annie et Deschênes, Louise.
2018.
« Regionalized terrestrial ecotoxicity assessment of copper-based fungicides applied in viticulture ».
Sustainability, vol. 10, nº 7.
Sarr, Ndéye Bineta, Agba, Basile L., Gagnon, François, Boeglen, Hervé et Vauzelle, Rodolphe.
2018.
« Analysis and experimental validation of efficient coded OFDM for an impulsive noise environment ».
Sensors, vol. 18, nº 11.
Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, François, Vincent et Tahan, Souheil-Antoine.
2018.
« “What-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads ».
International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4.
pp. 353-373.
Savaria, C., Phutthavong, P., Moustapha, H. et Garnier, F..
2018.
« Preliminary design for turbine housing and shroud segments ».
Aeronautical Journal, vol. 122, nº 1248.
pp. 260-282.
Sebaaly, Fadia, Vahedi, Hani, Kanaan, Hadi Youssef et Al-Haddad, Kamal.
2018.
« Novel current controller based on MPC with fixed switching frequency operation for a grid-tied inverter ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 8.
pp. 6193-6205.
Seede, Raiyan, Mostafa, Ahmad, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2018.
« Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Segui, Marine, Bezin, Simon et Botez, Ruxanda Mihaela.
2018.
« Cessna Citation X performances improvement by an adaptive winglet during the cruise flight ».
International Journal of Mechanical, Industrial and Aerospace Sciences, vol. 12, nº 4.
pp. 423-430.
Segui, Marine et Botez, Ruxanda Mihaela.
2018.
« Aerodynamic coefficients prediction from minimum computation combinations using OpenVSP software ».
International Journal of Mechanical, Industrial and Aerospace Sciences, vol. 12, nº 1.
pp. 9-16.
Segui, Marine, Mantilla, Matthieu et Botez, Ruxanda Mihaela.
2018.
« Design and validation of an aerodynamic model of the Cessna Citation X horizontal stabilizer using both OpenVSP and digital datcom ».
International Journal of Mechanical, Industrial and Aerospace Sciences, vol. 12, nº 1.
pp. 45-53.
Selim, Bassant, Muhaidat, Sami, Sofotasios, Paschalis C., Sharif, Bayan S., Stouraitis, Thanos, Karagiannidis, George K. et Al-Dhahir, Naofal.
2018.
« Performance analysis of non-orthogonal multiple access under I/Q imbalance ».
IEEE Access, vol. 6.
pp. 18453-18468.
Shaer, Bassel, Kenné, Jean-Pierre, Kaddissi, Claude et Fallaha, Charles.
2018.
« A chattering-free fuzzy hybrid sliding mode control of an electrohydraulic active suspension ».
Transactions of the Institute of Measurement and Control, vol. 40, nº 1.
pp. 222-238.
Shahkolaei, Atena, Nafchi, Hossein Ziaei, Al-Maadeed, Somaya et Cheriet, Mohamed.
2018.
« Subjective and objective quality assessment of degraded document images ».
Journal of Cultural Heritage, vol. 30.
pp. 199-209.
Shameli Sendi, Alireza, Louafi, Habib, He, Wenbo et Cheriet, Mohamed.
2018.
« Dynamic optimal countermeasure selection for intrusion response system ».
IEEE Transactions on Dependable and Secure Computing, vol. 15, nº 5.
pp. 755-770.
Sharifzadeh, Mohammad, Vahedi, Hani et Al Haddad, Kamal.
2018.
« New constraint in SHE-PWM for single phase inverter applications ».
IEEE Transactions on Industry Applications, vol. 54, nº 5.
pp. 4554-4562.
Sher, Hadeed Ahmed, Addoweesh, Khaled E. et Al Haddad, Kamal.
2018.
« An efficient and cost-effective hybrid MPPT method for a photovoltaic flyback micro-inverter ».
IEEE Transactions on Sustainable Energy, vol. 9, nº 3.
pp. 1137-1144.
Sheremetyev, V., Kudryashova, A., Dubinskiy, S., Galkin, S., Prokoshkin, S. et Brailovski, V..
2018.
« Structure and functional properties of metastable beta Ti-18Zr-14Nb (at.%) alloy for biomedical applications subjected to radial shear rolling and thermomechanical treatment ».
Journal of Alloys and Compounds, vol. 737.
pp. 678-683.
Shih, Andy et Akinwande, Akintunde Ibitayo.
2018.
« Solution-processed and self-assembled monolayer-treated high-voltage organic thin film transistors for flexible MEMS integration ».
MRS Advances, vol. 3, nº 33.
pp. 1877-1882.
Shih, Andy, Schell, Elizabeth et Akinwande, Akintunde Ibitayo.
2018.
« Flexible solution-processed high-voltage organic thin film transistor ».
Journal of Materials Research, vol. 33, nº 2.
pp. 149-160.
Shoari, Niloofar et Dubé, Jean-Sébastien.
2018.
« Toward improved analysis of concentration data: Embracing nondetects ».
Environmental Toxicology and Chemistry, vol. 37, nº 3.
pp. 643-656.
Shu, Tingting, Gharaaty, Sepehr, Xie, WenFang, Joubair, Ahmed et Bonev, Ilian A..
2018.
« Dynamic path tracking of industrial robots with high accuracy using photogrammetry sensor ».
IEEE/ASME Transactions on Mechatronics, vol. 23, nº 3.
pp. 1159-1170.
Silicia, Morgane et St-Jacques, Michèle.
2018.
« Innovation et sécurité des véhicules lourds circulant en milieu urbain au Québec ».
Routes et Transports, vol. 47, nº 1.
pp. 54-57.
Silva, Hudson Pacifico, Lehoux, Pascale et Hagemeister, Nicola.
2018.
« Developing a tool to assess responsibility in health innovation: Results from an international delphi study ».
Health Policy and Technology, vol. 7, nº 4.
pp. 388-396.
Singh, Praveen Kumar, Singh, Bhim, Bist, Vashist, Al-Haddad, Kamal et Chandra, Ambrish.
2018.
« BLDC motor drive based on bridgeless landsman PFC converter with single sensor and reduced stress on power devices ».
IEEE Transactions on Industry Applications, vol. 54, nº 1.
pp. 625-635.
Sleiman, Mohammad, Al-Haddad, Kamal, Blanchette, Handy Fortin et Kanaan, Hadi Youssef.
2018.
« Insertion index generation method using available leg-average voltage to control modular multilevel converters ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 8.
pp. 6206-6216.
Snaiki, Reda et Wu, Teng.
2018.
« A semi-empirical model for mean wind velocity profile of landfalling hurricane boundary layers ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 180.
pp. 249-261.
Snaiki, Reda et Wu, Teng.
2018.
« An analytical framework for rapid estimate of rain rate during tropical cyclones ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 174.
pp. 50-60.
Soleymani, Roghayeh, Granger, Eric et Fumera, Giorgio.
2018.
« Progressive boosting for class imbalance and its application to face re-identification ».
Expert Systems with Applications, vol. 101.
pp. 271-291.
Sollmann, N., Echlin, P. S., Schultz, V., Viher, P. V., Lyall, A. E., Tripodis, Y., Kaufmann, D., Hartl, E., Kinzel, P., Forwell, L. A., Johnson, A. M., Skopelja, E. N., Lepage, C., Bouix, S., Pasternak, O., Lin, A. P., Shenton, M. E. et Koerte, I. K..
2018.
« Sex differences in white matter alterations following repetitive subconcussive head impacts in collegiate ice hockey players ».
NeuroImage: Clinical, vol. 17.
pp. 642-649.
Somers, Lauren D., McKenzie, Jeffrey M., Zipper, Samuel C., Mark, Bryan G., Lagos, Pablo et Baraer, Michel.
2018.
« Does hillslope trenching enhance groundwater recharge and baseflow in the Peruvian Andes? ».
Hydrological Processes, vol. 32, nº 3.
pp. 318-331.
Songmene, V., Kouam, J. et Balhoul, A..
2018.
« Effect of minimum quantity lubrication (MQL) on fine and ultrafine particle emission and distribution during polishing of granite ».
Measurement: Journal of the International Measurement Confederation, vol. 114.
pp. 398-408.
Soujeri, E., Kaddoum, G. et Herceg, M..
2018.
« Design of an initial condition-index chaos shift keying modulation ».
Electronics Letters, vol. 54, nº 7.
pp. 447-449.
Soul, Hugo, Terriault, Patrick et Brailovski, Vladimir.
2018.
« The static and fatigue behavior of AlSiMg alloy plain, notched, and diamond lattice specimens fabricated by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Sriwasansak, Jamorn, Gruson, Adrien et Hachisuka, Toshiya.
2018.
« Efficient energy-compensated VPLs using photon splatting ».
Proceedings of the ACM on Computer Graphics and Interactive Techniques, vol. 1, nº 1.
pp. 1-13.
St-Onge, David, Sharf, Inna, Sagnières, Luc et Gosselin, Clément.
2018.
« A deployable mechanism concept for the collection of small-to-medium-size space debris ».
Advances in Space Research, vol. 61, nº 5.
pp. 1286-1297.
Subedi, Tara Nath, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« SDN-based fault-tolerant on-demand and in-advance bandwidth reservation in data center interconnects ».
International Journal of Communication Systems, vol. 31, nº 4.
Sun, Binhan, Fazeli, Fateh, Scott, Colin, Guo, Baoqi, Aranas, Clodualdo, Chu, Xin, Jahazi, Mohammad et Yue, Stephen.
2018.
« Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ».
Materials Science and Engineering: A, vol. 729.
pp. 496-507.
Sun, Xiaoguang, Houssin, Rémy, Renaud, Jean et Gardoni, Mickaël.
2018.
« Towards a human factors and ergonomics integration framework in the early product design phase: Function-Task-Behaviour ».
International Journal of Production Research, vol. 56, nº 14.
pp. 4941-4953.
Suprême, Hussein, Dessaint, Louis-A., Kamwa, Innocent et Heniche-Oussédik, Annissa.
2018.
« Development of new predictors based on the concept of center of power for transient and dynamic instability detection ».
IEEE Transactions on Smart Grid, vol. 9, nº 4.
pp. 3605-3615.
Sydnor, V. J., Rivas-Grajales, A. M., Lyall, A. E., Zhang, F., Bouix, S., Karmacharya, S., Shenton, M. E., Westin, C. F., Makris, N., Wassermann, D., O'Donnell, L. J. et Kubicki, M..
2018.
« A comparison of three fiber tract delineation methods and their impact on white matter analysis ».
NeuroImage, vol. 178.
pp. 318-331.
Tadayon, Navid et Kaddoum, Georges.
2018.
« Packet-level modeling of cooperative diversity: A queueing network approach ».
IEEE Access, vol. 6.
pp. 35223-35242.
Talebi, Seyyed Hesamondin, Jahazi, Mohammad et Melkonyan, Haikouhi.
2018.
« Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ».
Materials, vol. 11, nº 8.
Tan, Long, Li, Pandeng, Zhang, Qingzhe, Izquierdo, Ricardo, Chaker, Mohamed et Ma, Dongling.
2018.
« Toward enhancing solar cell performance: An effective and "green" additive ».
ACS Applied Materials and Interfaces, vol. 10, nº 7.
pp. 6498-6504.
Tata, M., Smaili, A. et Masson, C..
2018.
« Effect of grid topology on numerical simulations of flow fields around wind turbine nacelle anemometer ».
Journal of Applied Fluid Mechanics, vol. 11, nº 6.
pp. 1569-1578.
Tawfik, Hani H., Elsayed, Mohannad Y., Nabki, Frederic et El-Gamal, Mourad N..
2018.
« Hard-baked photoresist as a sacrificial layer for sub-180 °C surface micromachining processes ».
Micromachines, vol. 9, nº 5.
Tebaldi, Gabriele, Dave, Eshan V., Cannone Falchetto, Augusto, Hugener, Martin, Perraton, Daniel, Grilli, Andrea, Lo Presti, Davide, Pasetto, Marco, Loizos, Andreas, Jenkins, Kim, Apeagyei, Alex, Grenfell, James et Bocci, Maurizio.
2018.
« Recommendation of RILEM TC237-SIB: protocol for characterization of recycled asphalt (RA) materials for pavement applications ».
Materials and Structures = Matériaux et Constructions, vol. 51, nº 6.
Tebaldi, Gabriele, Dave, Eshan, Cannone Falchetto, Augusto, Hugener, Martin, Perraton, Daniel, Grilli, Andrea, Lo Presti, Davide, Pasetto, Marco, Loizos, Andreas, Jenkins, Kim, Apeagyei, Alex, Grenfell, James et Bocci, Maurizio.
2018.
« Recommendation of RILEM TC237-SIB on cohesion test of recycled asphalt ».
Materials and Structures = Matériaux et Constructions, vol. 51, nº 5.
Tenório, Leandro, de Assis, Cleverson Faber, da Silva, Adriano Maniçoba, de Paula Ferreira, William et Tanaka, Wilson Yoshio.
2018.
« Lean IT application in service desk in a wires and cable company ».
Journal of Lean Systems, vol. 3, nº 4.
Terriault, Patrick et Brailovski, Vladimir.
2018.
« Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing ».
Finite Elements in Analysis and Design, vol. 138.
pp. 1-11.
Tétrault, P. et Seers, P..
2018.
« Potential of a jet-induced shock wave to influence an upstream droplet cloud in compression-ignition engines using multiple injection strategies ».
International Journal of Multiphase Flow, vol. 101.
pp. 64-73.
Texier, D., Atmani, F., Bocher, P., Nadeau, F., Chen, J., Zedan, Y., Vanderesse, N. et Demers, V..
2018.
« Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation ».
International Journal of Fatigue, vol. 116.
pp. 220-233.
Thibeault, Claude et Gagnon, Ghyslain.
2018.
« On the analysis and the mitigation of power supply noise and power distribution network impedance variation for scan-based delay testing techniques ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 26, nº 7.
pp. 1377-1390.
Thrithamarassery Gangadharan, Deepak, Han, Yujie, Dubey, Ashish, Gao, Xinyu, Sun, Baoquan, Qiao, Qiquan, Izquierdo, Ricardo et Ma, Dongling.
2018.
« Aromatic alkylammonium spacer cations for efficient two-dimensional perovskite solar cells with enhanced moisture and thermal stability ».
Solar RRL, vol. 2, nº 4.
Toews, Matthew et Wells, M. William.
2018.
« Phantomless auto-calibration and online calibration assessment for a tracked freehand 2-D ultrasound probe ».
IEEE Transactions on Medical Imaging, vol. 37, nº 1.
pp. 262-272.
Tolossa, Yohannes Jote, Vuppala, Satyanarayana, Kaddoum, Georges et Abreu, Giuseppe.
2018.
« On the uplink secrecy capacity analysis in D2D-enabled cellular network ».
IEEE Systems Journal, vol. 12, nº 3.
pp. 2297-2307.
Tolouei, Ehsan, Toroghinejad, Mohammad Reza, Asgari, Hamed, Monajati Zadeh, Hossein, Ashrafizadeh, Fakhreddin, Szpunar, Jerzy A. et Bocher, Philippe.
2018.
« Microstructure and texture development in Al-3%Brass composite produced through ARB ».
Advanced Engineering Materials, vol. 20, nº 4.
Tran, Ha Vu, Kaddoum, Georges et Truong, Kien Trung.
2018.
« Resource allocation in SWIPT networks under a nonlinear energy harvesting model: Power efficiency, user fairness, and channel nonreciprocity ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 9.
pp. 8466-8480.
Tran, Ha-Vu et Kaddoum, Georges.
2018.
« RF wireless power transfer: Regreening future networks ».
IEEE Potentials, vol. 37, nº 2.
pp. 35-41.
Trochu, Julien, Chaabane, Amin et Ouhimmou, Mustapha.
2018.
« Reverse logistics network redesign under uncertainty for wood waste in the CRD industry ».
Resources, Conservation and Recycling, vol. 128.
pp. 32-47.
Troin, Magali, Arsenault, Richard, Martel, Jean-Luc et Brissette, François.
2018.
« Uncertainty of hydrological model components in climate change studies over two Nordic Quebec catchments ».
Journal of Hydrometeorology, vol. 19, nº 1.
pp. 27-46.
Trudeau, Charles, Bolduc, Martin, Beaupre, Patrick, Benavides-Guerrero, Jaime, Tremblay, Bruno et Cloutier, Sylvain G..
2018.
« Inkjet-printing of methylammonium lead trihalide perovskite as active layers for optoelectronic devices ».
MRS Advances, vol. 3, nº 32.
pp. 1837-1842.
Trudeau, Charles, Dion-Bertrand, Laura-Isabelle, Mukherjee, Sankha, Martel, Richard et Cloutier, Sylvain.
2018.
« Electrostatic deposition of large-surface graphene ».
Materials, vol. 11, nº 1.
p. 116.
Trudeau, Luc, Coulombe, Stéphane et Desrosiers, Christian.
2018.
« Cost-based search ordering for rate-constrained motion estimation applied to HEVC ».
IEEE Transactions on Broadcasting, vol. 64, nº 4.
pp. 922-932.
Tu, Fubin, Delbergue, Dorian, Klotz, Thierry, Bag, Amrita, Miao, Hongyan, Bianchetti, Charles, Brochu, Myriam, Bocher, Philippe et Levesque, Martin.
2018.
« Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials ».
International Journal of Mechanical Sciences, vol. 145.
pp. 353-366.
Tuck, L., Samson, C., Laliberté, J., Wells, M. et Bélanger, F..
2018.
« Magnetic interference testing method for an electric fixed-wing unmanned aircraft system (UAS) ».
Journal of Unmanned Vehicle Systems, vol. 6, nº 3.
pp. 177-194.
Uh Zapata, M., Pham Van Bang, D. et Nguyen, K. D..
2018.
« Parallel simulations for a 2D x/z two-phase flow fluid-solid particle model ».
Computers and Fluids, vol. 173.
pp. 103-110.
Ulloa-Cazarez, Rosa Leonor, López-Martín, Cuauhtémoc, Abran, Alain et Yáñez-Márquez, Cornelio.
2018.
« Prediction of online students performance by means of genetic programming ».
Applied Artificial Intelligence, vol. 32, nº 9-10.
pp. 858-881.
Vahedi, Hani, Sharifzadeh, Mohammad et Al-Haddad, Kamal.
2018.
« Modified seven-level Pack U-Cell inverter for photovoltaic applications ».
IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 6, nº 3.
pp. 1508-1516.
Vahedi, Hani, Shojaei, Ali Asghar, Dessaint, Louis- A. et Al-Haddad, Kamal.
2018.
« Reduced DC link voltage active power filter using modified PUC5 converter ».
IEEE Transactions on Power Electronics, vol. 33, nº 2.
pp. 943-947.
Vakilinia, Shahin et Cheriet, Mohamed.
2018.
« Preemptive cloud resource allocation modeling of processing jobs ».
Journal of Supercomputing, vol. 74, nº 5.
pp. 2116-2150.
Vanderesse, N., Larregain, B., Bridier, F. et Bocher, P..
2018.
« Experimental assessment of high heating rates in induction heating with temperature-sensitive lacquers ».
Journal of Materials Engineering and Performance, vol. 27, nº 8.
pp. 3831-3843.
Vanderesse, N., Richter, A., Nuño, N. et Bocher, P..
2018.
« Measurement of deformation heterogeneities in additive manufactured lattice materials by Digital Image Correlation: Strain maps analysis and reliability assessment ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 86.
pp. 397-408.
Varadharajan, Vivek Shankar, St-Onge, David, Gub, Christian et Beltrame, Giovanni.
2018.
« Over-the-air updates for robotic swarms ».
IEEE Software, vol. 35, nº 2.
pp. 44-50.
VelezMarquez, Maria Isabel, Raymond, Jasmin, Blessent, Daniela, Philippe, Mikael, Simon, Nataline, Bour, Olivier et Lamarche, Louis.
2018.
« Distributed thermal response tests using a heating cable and fiber optic temperature sensing ».
Energies, vol. 11, nº 11.
Vinches, Ludwig et Hallé, Stéphane.
2018.
« Effects of size and morphology of TiO2 and SiO2 airborne nanoparticles on their filtration through chemical protective clothing ».
International Journal of Theoretical and Applied Nanotechnology, vol. 6.
pp. 11-20.
Voix, Jeremie et Dumoulin, Romain.
2018.
« Inciting our children to turn their music down: The AYE concept ».
Journal of the Acoustical Society of America, vol. 144, nº 3.
p. 1929.
Voix, Jérémie, Dumoulin, Romain et Levesque, Julia.
2018.
« Inciting our children to turn their music down: the AYE concept proposal ».
Canadian Acoustics = Acoustique Canadienne, vol. 46, nº 4.
pp. 14-15.
Vuppala, Satyanarayana, Tolossa, Yohannes Jote, Kaddoum, Georges et Abreu, Giuseppe.
2018.
« On the physical layer security analysis of hybrid millimeter wave networks ».
IEEE Transactions on Communications, vol. 66, nº 3.
pp. 1139-1152.
Wang, Qingsong et Niu, Shuangxia.
2018.
« Design, modeling, and control of a novel hybrid-excited flux-bidirectional-modulated generator-based wind power generation system ».
IEEE Transactions on Power Electronics, vol. 33, nº 4.
pp. 3086-3096.
Wang, Qingsong, Niu, Shuangxia et Ching, T. W..
2018.
« A new double-winding vernier permanent magnet wind power generator for hybrid AC/DC microgrid application ».
IEEE Transactions on Magnetics, vol. 54, nº 11.
Wang, Qingsong, Niu, Shuangxia et Yang, Lin.
2018.
« Design optimization of a novel scale-down hybrid-excited dual permanent magnet generator for direct-drive wind power application ».
IEEE Transactions on Magnetics, vol. 54, nº 3.
Wang, Qingsong et Shuangxia, Niu.
2018.
« A novel DC-coil-free hybrid-excited machine with consequent-pole PM rotor ».
Energies, vol. 11, nº 4.
Wang, Wei, Liu, Huaiju, Zhu, Caichao, Bocher, Philippe, Liu, Heli et Sun, Zhangdong.
2018.
« Evaluation of rolling contact fatigue of a carburized wind turbine gear considering the residual stress and hardness gradient ».
Journal of Tribology, vol. 140, nº 6.
Wang, Yu-Hsuan, Song, Pengfei, Li, Xiao, Ru, Changhai, Ferrari, Giovanni, Balasubramanian, Prabakaran, Amabili, Marco, Sun, Yu et Liu, Xinyu.
2018.
« A paper-based piezoelectric accelerometer ».
Micromachines, vol. 9, nº 1.
Wei, Qiliang, Yang, Xiaohua, Zhang, Gaixia, Wang, Dongniu, Zuin, Lucia, Banham, Dustin, Yang, Lijun, Ye, Siyu, Wang, Youling, Mohamedi, Mohamed et Sun, Shuhui.
2018.
« An active and robust Si-Fe/N/C catalyst derived from waste reed for oxygen reduction ».
Applied Catalysis B: Environmental, vol. 237.
pp. 85-93.
Wei, Qiliang, Zhang, Gaixia, Yang, Xiaohua, Fu, Yanqing, Yang, Guanhua, Chen, Ning, Chen, Weifeng et Sun, Shuhui.
2018.
« Litchi-like porous Fe/N/C spheres with atomically dispersed FeN: X promoted by sulfur as highly efficient oxygen electrocatalysts for Zn-air batteries ».
Journal of Materials Chemistry A, vol. 6, nº 11.
pp. 4605-4610.
Woods, John S., Damiani, Mattia, Fantke, Peter, Henderson, Andrew D., Johnston, John M., Bare, Jane, Sala, Serenella, Maia de Souza, Danielle, Pfister, Stephan, Posthuma, Leo, Rosenbaum, Ralph K. et Verones, Francesca.
2018.
« Ecosystem quality in LCIA: Status quo, harmonization, and suggestions for the way forward ».
International Journal of Life Cycle Assessment, vol. 23, nº 10.
pp. 1995-2006.
Wu, Mingjie, Wei, Qiliang, Zhang, Gaixia, Qiao, Jinli, Wu, Mingxing, Zhang, Jihai, Gong, Qiaojuan et Sun, Shuhui.
2018.
« Fe/Co double hydroxide/oxide nanoparticles on N-Doped CNTs as highly efficient electrocatalyst for rechargeable liquid and quasi-solid-state zinc–air batteries ».
Advanced Energy Materials, vol. 8, nº 30.
Xiao, Ke, Gong, Liang et Kadoch, Michel.
2018.
« Opportunistic Multicast NOMA with security concerns in a 5G massive MIMO system ».
IEEE Communications Magazine, vol. 56, nº 3.
pp. 91-95.
Xiao, Ke, Kadoch, Michel, Rutagemwa, Humphrey et Li, Chen.
2018.
« Opportunistic NOMA-based massive MIMO precoding for 5G new radio ».
Wireless Communications and Mobile Computing, vol. 2018.
Xiao, Ke, Li, Wei, Kadoch, Michel et Li, Chen.
2018.
« On the secrecy capacity of 5G MmWave small cell networks ».
IEEE Wireless Communications, vol. 25, nº 4.
pp. 47-51.
Xiao, Yiming, Drouin, Simon, Gerard, Ian J., Fonov, Vladimir, Aubert-Broche, Bérengère, Ma, Yuhan, Kersten-Oertel, Marta, Tampieri, Donatella et Collins, D. Louis.
2018.
« An augmented-reality system prototype for guiding transcranial Doppler ultrasound examination ».
Multimedia Tools and Applications, vol. 77, nº 21.
pp. 27789-27805.
Xu, Jin, Dziong, Zbigniew et Cabani, Adnane.
2018.
« Simultaneous temperature sensing using distributed cascading fiber Bragg grating-based single-ended Brillouin optical time-domain analyzer ».
Laser Physics, vol. 28, nº 12.
Yu, Meng, Wei, Qiliang, Wu, Mingjie, Wu, Jie, Liu, Jieyu, Zhang, Gaixia, Sun, Shuhui et Wang, Weichao.
2018.
« Morphology controlled synthesis of SmMn2O5 nanocrystals via a surfactant-free route for Zn-air batteries ».
Journal of Power Sources, vol. 396.
pp. 754-763.
Yu, Shuai, Langar, Rami, Fu, Xiaoming, Wang, Li et Han, Zhu.
2018.
« Computation offloading with data caching enhancement for mobile edge computing ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 11.
pp. 11098-11112.
Zadi, Tahar, Assadi, Aymen Amine, Nasrallah, Noureddine, Bouallouche, Rachida, Nguyen-Tri, Phuong, Bouzaza, Abdelkrim, Azizi, Mohamed Miftah, Maachi, Rachida et Wolbert, Dominique.
2018.
« Treatment of hospital indoor air by a hybrid system of combined plasma with photocatalysis: case of trichloromethane ».
Chemical Engineering Journal, vol. 349.
pp. 276-286.
Zeighami, A., Aissaoui, R. et Dumas, R..
2018.
« Knee medial and lateral contact forces in a musculoskeletal model with subject-specific contact point trajectories ».
Journal of Biomechanics, vol. 69.
pp. 138-145.
Zergane, Saïd, Smaili, Arezki et Masson, Christian.
2018.
« Optimization of wind turbine placement in a wind farm using a new pseudo-random number generation method ».
Renewable Energy, vol. 125.
pp. 166-171.
Zhang, C., Shahriari, D., Loucif, A., Melkonyan, H. et Jahazi, M..
2018.
« Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ».
International Journal of Advanced Manufacturing Technology, vol. 99, nº 9-12.
pp. 3035-3048.
Zhang, Chunping, Loucif, Abdelhalim, Jahazi, Mohammad, Tremblay, Rami et Lapierre, Louis-Philippe.
2018.
« On the effect of filling rate on positive macrosegregation patterns in large size cast steel ingots ».
Applied Sciences, vol. 8, nº 10.
Zhang, Gaixia, Norouzi Banis, Mohammad, Wei, Qiliang, Cai, Mei, Zhang, Yong, Li, Ruying, Sun, Shuhui et Sun, Xueliang.
2018.
« Pt/TiSix-NCNT novel janus nanostructure: A new type of high-performance electrocatalyst ».
ACS Applied Materials and Interfaces, vol. 10, nº 13.
pp. 10771-10777.
Zhang, Mingli et Desrosiers, Christian.
2018.
« Structure preserving image denoising based on low-rank reconstruction and gradient histograms ».
Computer Vision and Image Understanding, vol. 171.
pp. 48-60.
Zhang, Mingli, Desrosiers, Christian et Zhang, Caiming.
2018.
« Atlas-based reconstruction of high performance brain MR data ».
Pattern Recognition, vol. 76.
pp. 549-559.
Zheng, Lijun, Zheng, Shizheng, Zhu, Zhengyou, Xu, Qiaoling, Zhang, Gaixia, Sun, Shuhui et Yang, Dachi.
2018.
« Photochemical synthesis of radiate titanium oxide microrods arrays supporting platinum nanoparticles for photoassisted electrooxidation of methanol ».
Advanced Materials Interfaces, vol. 5, nº 21.
Zhu, Linbo B., Bouzid, Abdel-Hakim, Hong, Jun et Zhang, Zaoxiao.
2018.
« Elastic interaction in bolted flange joints: An analytical model to predict and optimize bolt load ».
Journal of Pressure Vessel Technology, vol. 140, nº 4.
p. 10.
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2018.
« Analytical evaluation of elastic interaction in bolted flange joints ».
International Journal of Pressure Vessels and Piping, vol. 165.
pp. 176-184.
Zhu, M., Pérez Arroyo, C., Fosso Pouangué, A., Sanjosé, M. et Moreau, S..
2018.
« Isothermal and heated subsonic jet noise using large eddy simulations on unstructured grids ».
Computers and Fluids, vol. 171.
pp. 166-192.
Zhu, Tao, Lallier-Daniels, Dominic, Sanjosé, Marlène, Moreau, Stéphane et Carolus, Thomas.
2018.
« Rotating coherent flow structures as a source for narrowband tip clearance noise from axial fans ».
Journal of Sound and Vibration, vol. 417.
pp. 198-215.
Ziabakhsh, Soheyl, Gagnon, Ghyslain et Roberts, Gordon W..
2018.
« The peak-SNR performances of voltage-mode versus time-mode circuits ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 65, nº 12.
pp. 1869-1873.
Ziaei Nafchi, Hossein et Cheriet, Mohamed.
2018.
« Efficient no-reference quality assessment and classification model for contrast distorted images ».
IEEE Transactions on Broadcasting, vol. 64, nº 2.
pp. 518-523.
Zokagoa, Jean-Marie et Soulaimani, Azzeddine.
2018.
« A POD-based reduced-order model for uncertainty analyses in shallow water flows ».
International Journal of Computational Fluid Dynamics, vol. 32, nº 6-7.
pp. 278-292.
Zongo, Floriane, Tahan, Antoine, Aidibe, Ali et Brailovski, Vladimir.
2018.
« Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
Zumer, Raphaël et Ratté, Sylvie.
2018.
« Color-independent classification of animation video ».
International Journal of Multimedia Information Retrieval, vol. 7, nº 3.
pp. 187-196. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau