| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Le groupe de recherche est "LIPPS - Laboratoire d’ingénierie des produits, procédés et systèmes"Nombre de documents archivés : 1241. 2024
Barakat, H., Zedan, Y., Samuel, A. M., Songmene, V. et Samuel, F. H..
2024.
« Parameters controlling drilling and tapping characteristics of aluminum based alloys ».
In Light Metals (Orlando, FL, USA, Mar. 03-07, 2024)
Coll. « Minerals, Metals and Materials Series »
pp. 313-325.
Springer.
Bechara, Helene, Zemouri, Ryad, Kedjar, Bachir, Merkhouf, Arezki, Al-Haddad, Kamal et Tahan, Antoine.
2024.
« Non-invasive detection of rotor inter-turn short circuit in large hydrogenerators by using stray flux measurement combined with convolutional variational autoencoder analysis (CVAE) ».
IEEE Transactions on Industry Applications, vol. 60, nº 1.
pp. 196-205.
Chrétien, Antoine, Tahan, Antoine et Pelletier, Francis.
2024.
« Wind turbine blade damage evaluation under multiple operating conditions and based on 10-min SCADA data ».
Energies, vol. 17, nº 5.
Grine, Madani, Slamani, Mohamed, Laouissi, Aissa, Arslane, Mustapha, Rokbi, Mansour et Chatelain, Jean-François.
2024.
« Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms ».
International Journal of Advanced Manufacturing Technology, vol. 130, nº 5-6.
pp. 3115-3132.
Ibrahim, Rony, Zemouri, Ryad, Kedjar, Bachir, Merkhouf, Arezki, Tahan, Antoine, Al-Haddad, Kamal et Lafleur, François.
2024.
« Non-invasive detection of rotor inter-turn short circuit of a hydrogenerator using AI-based variational autoencoder ».
IEEE Transactions on Industry Applications, vol. 60, nº 1.
pp. 28-37.
Oliveira-Filho, Adaiton, Zemouri, Ryad, Pelletier, Francis et Tahan, Antoine.
2024.
« System condition monitoring based on a standardized latent space and the nataf transform ».
IEEE Access, vol. 12.
pp. 32637-32659.
Slamani, Mohamed, Makri, Hocine, Boudilmi, Aissa, Bonev, Ilian A. et Chatelain, Jean-François.
2024.
« Calibration strategies for enhancing accuracy in serial industrial robots for orbital milling applications ».
Industrial Robot.
2023
Alkhabbat, Mohammed, Nadeau, François, Mirakhorli, Fatemeh, Dao, Thien-My et Pham, Xuan Tan.
2023.
« Effect of laser welding parameters with different fillers on solidification cracking and mechanical properties of AA7075 ».
Metals, vol. 13, nº 10.
Arès, Francis, Delbergue, Dorian et Demers, Vincent.
2023.
« Injection flow rate threshold preventing atypical in-cavity pressure during low-pressure powder injection molding ».
Powders, vol. 2, nº 4.
pp. 709-726.
Barroeta Robles, J., Dubé, M., Hubert, P. et Yousefpour, A..
2023.
« Healing study of poly (ether-imide) and poly ether ether ketone using resin films and a parallel plate rheometer ».
Composites Part A: Applied Science and Manufacturing, vol. 174.
Barroeta Robles, Julieta, Rahmat, M., Wang, Y., Dubé, M., Hubert, P. et Yousefpour, A.. 2023. « Repair of impacted CF/PEEK specimens at different energy levels ». Affiche présentée lors de la conférence : ICCM International Conferences on Composite Materials (Belfast, Ireland, July 30-Aug. 04, 2023).
Bechara, Helene, Merkhouf, Arezki, Zemouri, Ryad, Kedjar, Bachir, Al Haddad, Kamal et Tahan, Antoine.
2023.
« Field winding short circuit fault signature analysis in stray flux of large hydrogenerator ».
In 6th International Conference on Renewable Energy for Developing Countries (REDEC) (Zouk Mosbeh, Lebanon, July 05-07, 2023)
pp. 78-83.
Institute of Electrical and Electronics Engineers.
Bedard, Frederic, Loucif, Abdelhalim, Jahazi, Mohammad et Songmene, Victor.
2023.
« Microstructural damage during electrical discharge machining of a high silicon aluminum alloy for space applications ».
International Journal of Advanced Manufacturing Technology, vol. 128, nº 5-6.
pp. 2311-2317.
Ben Amor, Sabrine, Zongo, Floriane, Eltaief, Ameni, Maatki, Aymen, Louhichi, Borhen et Tahan, Antoine.
2023.
« A new method to select optimal part building orientation for additive manufacturing processes based on geometric complexity and heat shrinkage ».
Progress in Additive Manufacturing, vol. 8, nº 2.
pp. 211-222.
Boton, Conrad, Rivest, Louis, Kubicki, Sylvain et Ghnaya, Oussama.
2023.
« 4D simulation research in construction: A systematic mapping study ».
Archives of Computational Methods in Engineering, vol. 30, nº 4.
pp. 2451-2472.
Chrétien, Antoine, Tahan, Antoine, Cambron, Philippe et Oliveira-Filho, Adaiton.
2023.
« Operational wind turbine blade damage evaluation based on 10-min SCADA and 1 Hz Data ».
Energies, vol. 16, nº 7.
Cognet, Bruno, Pernot, Jean-Philippe, Rivest, Louis et Danjou, Christophe.
2023.
« Systematic comparison of digital maturity assessment models ».
Journal of Industrial and Production Engineering, vol. 40, nº 7.
pp. 519-537.
Côté, R., Delbergue, D. et Demers, V..
2023.
« Detection of defects in parts produced by material extrusion 3D printing using in-line pressure measurement ».
In International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)
Côté, Raphaël, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien et Soulestin, Jérémie.
2023.
« A strategy to eliminate interbead defects and improve dimensional accuracy in material extrusion 3D printing of highly filled polymer ».
Additive Manufacturing, vol. 68.
Cote, Raphaël, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien et Soulestin, Jérémie.
2023.
« Producing metallic parts using 3D printing of low-viscosity powder-binder feedstock: A feasibility study ».
In 37th International Conference of the Polymer Processing Society (Fukuoka, Japan, Apr. 11-15, 2022)
Coll. « AIP Conference Proceedings », vol. 2884.
AIP Publishing.
Delbergue, D., Boudeau, L. et Demers, V.
2023.
« Development of an aluminum-based feedstock for material extrusion 3D printing ».
In International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)
Demers, Vincent.
2023.
« Material extrusion 3D printing using low-viscosity MIM-like feedstocks ».
In International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)
Dhondapure, Prashant, Tize Mha, Pierre, Nayak, Soumyaranjan, Ebacher, Lea, Dourandish, Simin, Champliaud, Henri, Morin, Jean -Benoit et Jahazi, Mohammad.
2023.
« Influence of deformation path on the stress state and damage evolution along the central axis of a large size forged ingot of AISI H13 steel ».
Journal of Materials Research and Technology, vol. 27.
pp. 8244-8257.
Dollon, Q., Tahan, A., Antoni, J., Gagnon, M. et Monette, C..
2023.
« Toward a better understanding of synchronous vibrations in hydroelectric turbines ».
Journal of Sound and Vibration, vol. 544.
Dongmo Tambah, Kevin Gildas, Kenné, Jean-Pierre et Songmene, Victor.
2023.
« Preventive maintenance and silica exposure limits integrated in the production planning of a granite processing unit ».
Journal of Quality in Maintenance Engineering, vol. 29, nº 1.
pp. 1-26.
Fayed, Eslam M., Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2023.
« Effect of microwave hybrid heat treatment on the microstructure and hardness of 3D printed Inconel 718 superalloy ».
Canadian Metallurgical Quarterly.
Geisler, Antoine, Sadeghifar, Morteza, Morin, Jean -Benoit, Loucif, Abdelhalim et Jahazi, Mohammad.
2023.
« Void closure during open die forging of large size martensitic stainless-steel ingots: an experimental-analytical-numerical study ».
International Journal of Material Forming, vol. 16, nº 1.
Ghnaya, Oussama, Pourzarei, Hamidreza, Rivest, Louis et Boton, Conrad.
2023.
« Role of electronic document management systems in the design change management process ».
In Proceedings of the Canadian Society of Civil Engineering Annual Conference 2022 (Whistler, BC, Canada, May 25-28, 2022)
Coll. « Lecture notes in civil engineering », vol. 363.
pp. 673-685.
Springer Science and Business Media.
Girgis, Abram, Samuel, Ehab, Samuel, Agnes M., Songmene, Victor et Samuel, Fawzy H..
2023.
« Effect of Cu content on the alloy tensile properties of Al-Cu based alloys tested at 25 degrees C and 250 degrees C: Application of the concept of quality index ».
Materials, vol. 16, nº 4.
Grine, Madani, Slamani, Mohamed, Arslane, Mustapha, Rokbi, Mansour et Chatelain, Jean-François.
2023.
« Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material ».
International Journal of Advanced Manufacturing Technology, vol. 128, nº 7-8.
pp. 3183-3196.
Gunther, Jason, Lengaigne, Jacques, Girard, Mélanie, Toupin-Guay, Valérie, Teasdale, James T., Dubé, Martine et Tabiai, Ilyass.
2023.
« A versatile hot melt centrifugal spinning apparatus for thermoplastic microfibres production ».
HardwareX, vol. 15.
Habassi, Faiçal, Houria, Manel, Barka, Noureddine et Jahazi, Mohammad.
2023.
« Influence of post-treatment on microstructure and mechanical properties of additively manufactured C300 maraging steel ».
Materials Characterization, vol. 202.
Haghniaz, Foad, Delbergue, Dorian, Côté, Raphaël et Demers, Vincent.
2023.
« Mold filling behaviour of LPIM feedstocks using numerical simulations and real-scale injections ».
Powder Metallurgy.
Hochscheid, Elodie, Falardeau, Maggie, Lapalme, James, Boton, Conrad et Rivest, Louis.
2023.
« Practitioners' concerns about their liability toward BIM collaborative digital mockups: Case study in civil engineering ».
Journal of Construction Engineering and Management, vol. 149, nº 9.
Ibrahim, Rony, Tahan, Antoine, Kedjar, Bachir, Al-Haddad, Kamal, Zemouri, Ryad et Merkhouf, Arezki.
2023.
« Vibroacoustic signal-based diagnosis for rotor faults in large synchronous machines - an overview ».
In 6th International Conference on Renewable Energy for Developing Countries (REDEC) (Zouk Mosbeh, Lebanon, July 05-07, 2023)
pp. 72-77.
IEEE.
Ibrahim, Rony, Zemouri, Ryad, Kedjar, Bachir, Tahan, Antoine, Merkhouf, Arezki et Al-Haddad, Kamal.
2023.
« Rotor fault diagnosis in a hydrogenerator based on the stator vibration and the variational autoencoder ».
In IEEE International Electric Machines and Drives Conference, IEMDC (San Francisco, CA, USA, May 15-18, 2023)
Institute of Electrical and Electronics Engineers.
Javidikia, Mahshad, Sadeghifar, Morteza, Champliaud, Henri et Jahazi, Mohammad.
2023.
« Grain size and temperature evolutions during linear friction welding of Ni-base superalloy Waspaloy: Simulations and experimental validations ».
Journal of Advanced Joining Processes, vol. 8.
Jose, Sagar, Nguyen, Khanh T. P., Medjaher, Kamal, Zemouri, Ryad, Lévesque, Mélanie et Tahan, Antoine.
2023.
« Fault detection and diagnostics in the context of sparse multimodal data and expert knowledge assistance: Application to hydrogenerators ».
Computers in Industry, vol. 151.
Jose, Sagar, Zemouri, Ryad, Levesque, Melanie, Nguyen, Khanh T. P., Tahan, Antoine et Medjaher, Kamal.
2023.
« Informed machine learning for image-data-driven diagnostics of hydrogenerators ».
[Article de conférence]. IFAC-PapersOnLine, vol. 56, nº 2.
pp. 11912-11917.
Kurusu, Rafael S., Gholami, Mohsen, Demarquette, Nicole R. et Demers, Vincent.
2023.
« Surface properties of molds for powder injection molding and their effect on feedstock moldability and mold adhesion ».
International Journal of Advanced Manufacturing Technology, vol. 126, nº 1-2.
pp. 381-390.
Maroufkhani, Mohammad, Hakimian, Soorosh, Khodabandeh, Alireza, Radu, Iulian, Hof, Lucas A. et Jahazi, Mohammad.
2023.
« Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint ».
Materials, vol. 16, nº 17.
Martin, R. G., Johansson, C., Tavares, J. R. et Dubé, M.. 2023. « A degree of bonding evolution study of co-consolidated PEEK/PEI composite materials during welding ». Communication lors de la conférence : ICCM International Conferences on Composite Materials (Belfast, Ireland, July 30-Aug. 04, 2023).
Martin, Romain G., Figueiredo, Martin, Johansson, Christer, Tavares, Jason R. et Dubé, Martine.
2023.
« Characterization of magnetic susceptor heating rate due to hysteresis losses in thermoplastic welding ».
SAMPE Journal, vol. 59, nº 5.
pp. 19-27.
Martin, Romain G., Figueiredo, Martin, Johansson, Christer, Tavares, Jason R. et Dubé, Martine.
2023.
« Hysteresis losses magnetic susceptor heating rate characterization ».
In International SAMPE Technical Conference (Seattle, WA, USA, Apr. 17-20, 2023)
Society for the Advancement of Material and Process Engineering.
Meiabadi, Saleh, Demers, Vincent et Dufresne, Louis.
2023.
« Smoothed particle hydrodynamics approach for simulation of non-newtonian flow of feedstocks used in powder injection molding ».
Metals, vol. 13, nº 9.
Meiabadi, Saleh, Nematzadeh, Fardin, Kornokar, Kianoosh, Mostaan, Hossein, ShamsBorhan, Mahmoud, Khandan, Rasoul, Demers, Vincent, Lawrence, Jonathan et Moradi, Mahmoud.
2023.
« Contrasting the mechanical and metallurgical properties of laser welded and gas tungsten arc welded S500MC steel ».
Welding in the World.
Mha, Pierre Tize, Dhondapure, Prashant, Jahazi, Mohammad, Tongne, Amèvi et Pantale, Olivier.
2023.
« Interpolation and extrapolation performance measurement of analytical and ANN-based flow laws for hot deformation behavior of medium carbon steel ».
Metals, vol. 13, nº 3.
Mirzaei, Sajad, Bohlooli Arkhazloo, Nima, Bazdidi-Tehrani, Farzad, Morin, Jean -Benoit, Loucif, Abdelhalim et Jahazi, Mohammad.
2023.
« Influence of spacers and skid sizes on heat treatment of large forgings within an industrial electric furnace ».
Energies, vol. 16, nº 7.
Mohamed, A. M. A., Samuel, E., Samuel, A. M., Samuel, F. H., Songmene, V. et Doty, H. W..
2023.
« Effect of intermetallics and tramp elements on porosity formation and hardness of Al-Si-Mg and Al-Si-Cu-Mg alloys ».
International Journal of Metalcasting, vol. 17, nº 2.
pp. 664-681.
Mohamed, A. M. A., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H..
2023.
« Effect of free cutting elements on the microstructural evaluation and mechanical properties of Al–Si cast alloys ».
International Journal of Metalcasting, vol. 17, nº 2.
pp. 959-979.
Moradi, Mahmoud, Kornokar, Kianoosh, Nematzadeh, Fardin, Mostaan, Hossein, Meiabadi, Saleh, Demers, Vincent et Lawrence, Jonathan.
2023.
« Microstructural and mechanical investigation on fiber laser welding of S500MC steel ».
Sadhana - Academy Proceedings in Engineering Sciences, vol. 48, nº 1.
Muhammed, Musa, Javidani, Mousa, Heidari, Majid et Jahazi, Mohammad.
2023.
« Enhancing the tribological performance of tool steels for wood-processing applications: A comprehensive review ».
Metals, vol. 13, nº 8.
Oliveira-Filho, Adaiton, Zemouri, Ryad, Cambron, Philippe et Tahan, Antoine.
2023.
« Early detection and diagnosis of wind turbine abnormal conditions using an interpretable supervised variational autoencoder model ».
Energies, vol. 16, nº 12.
Omidi, Narges, Farhadipour, Pedram, Baali, Lamya, Bensalem, Karim, Barka, Noureddine et Jahazi, Mohammad.
2023.
« A comprehensive review of additively manufactured H13 tool steel applicable in the injection mold industry: Applications, designs, microstructure, mechanical properties ».
JOM, vol. 75, nº 11.
pp. 4457-4469.
Omrane, Mohamed Ahmed, Côté, Raphaël et Demers, Vincent.
2023.
« Optimization of the printability envelope of low-viscosity powder-binder feedstocks used in material extrusion 3D printing ».
Rapid Prototyping Journal.
Pelletier, Emmanuel et Demers, Vincent. 2023. « Testing the limits of low-viscosity feedstock in material extrusion 3D printing of highly-filled polymer ». Communication lors de la conférence : HI-AM Conference (Halifax, NS, Canada, June 27-28, 2023).
Proteau, Antoine, Tahan, Antoine, Zemouri, Ryad et Thomas, Marc.
2023.
« Predicting the quality of a machined workpiece with a variational autoencoder approach ».
Journal of Intelligent Manufacturing, vol. 34, nº 2.
pp. 719-737.
Radan, Lida, Songmene, Victor, Zedan, Yasser et Samuel, Fawzy H..
2023.
« Investigating the effect of heat treatment on the microstructure and hardness of aluminum-lithium alloys ».
Materials, vol. 16, nº 19.
Sadeghifar, Morteza, Javidikia, Mahshad, Loucif, Abdelhalim, Jahazi, Mohammad et Songmene, Victor.
2023.
« Experimental and numerical analyses of residual stress redistributions in large steel dies: Influence of tempering cycles and rough milling ».
Journal of Materials Research and Technology, vol. 24.
pp. 395-406.
Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine.
2023.
« Analysis of industrial quenching (air transfer + oil immersion) and the cooling regimes after immersion ».
In Heat Treat 2023: Proceedings of the 32nd ASM Heat Treating Society Conference (Detroit, MI, USA, Oct. 17-19, 2023)
pp. 106-113.
ASM International.
Samuel, Agnes M., Samuel, Ehab, Songmene, Victor et Samuel, Fawzy H..
2023.
« A comparative study of grain refining of Al-(7–17%) Si cast alloys using Al-10% Ti and Al-4% B master alloys ».
Materials, vol. 16, nº 7.
Samuel, Agnes M., Samuel, Ehab, Songmene, Victor et Samuel, Fawzy H..
2023.
« A review on porosity formation in aluminum-based alloys ».
Materials, vol. 16, nº 5.
Samuel, Ehab, Samuel, Agnes M., Songmene, Victor et Samuel, Fawzy H..
2023.
« A review on the analysis of thermal and thermodynamic aspects of grain refinement of aluminum-silicon-based alloys ».
Materials, vol. 16, nº 16.
Smith, A. W., Pattery, H., Canart, J. P., Tabiai, I. et Dubé, M.. 2023. « Mechanical sieving of carbon-fibre/PEEK prepreg trim waste and its influence on compression moulded panel properties ». Communication lors de la conférence : ICCM International Conferences on Composite Materials (Belfast, Ireland, July 30-Aug. 04, 2023).
Tafti, Atefeh A., Demers, Vincent, Vachon, Guillem et Brailovski, Vladimir.
2023.
« Influence of powder size on the moldability and sintered properties of irregular iron-based feedstock used in low-pressure powder injection molding ».
Powder Technology, vol. 420.
Tahmasbi, Ali, Samuel, Agnes M., Zedan, Yasser, Songmene, Victor et Samuel, Fawzy H..
2023.
« Effect of aging treatment on the strength and microstructure of 7075-based alloys containing 2% Li and/or 0.12% Sc ».
Materials, vol. 16, nº 23.
Tcheuhebou Tina, Sandrine A., Javidikia, Mahshad, Jahazi, Mohammad et Songmene, Victor.
2023.
« The influence of tool geometry parameters on thermo-mechanical loads and residual stresses induced by orthogonal cutting of AA6061-T6: A numerical investigation ».
Processes, vol. 11, nº 4.
Tize Mha, Pierre, Dhondapure, Prashant, Jahazi, Mohammad, Tongne, Amèvi et Pantalé, Olivier.
2023.
« Artificial neural network-based critical conditions for the dynamic recrystallization of medium carbon steel and application ».
Metals, vol. 13, nº 10.
Tlija, M., Korbi, A., Louhichi, B. et Tahan, A..
2023.
« A computer-aided design-based tolerance analysis of assemblies with form defects and deformations of nonrigid parts ».
Journal of Computing and Information Science in Engineering, vol. 23, nº 2.
Zemouri, Ryad, Ibrahim, Rony et Tahan, Antoine.
2023.
« Hydrogenerator early fault detection: Sparse Dictionary Learning jointly with the Variational Autoencoder ».
Engineering Applications of Artificial Intelligence, vol. 120.
2022
Canciglieri Junior, Osiris et Noël, Frédéric et Rivest, Louis et Bouras, Abdelaziz, éds.
2022.
« Product lifecycle management. Green and blue technologies to support smart and sustainable organizations : 18th IFIP WG 5.1 International Conference, PLM 2021, Curitiba, Brazil, July 11–14, 2021, Revised Selected Papers, Part II ».
Springer.
Abdelaziz, Mohamed H., Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy H..
2022.
« Mechanical performance and precipitation behavior in Al-Si-Cu-Mg cast alloys: Effect of prolonged thermal exposure ».
Materials, vol. 15, nº 8.
Amjadian, A., Chatelain, J-F. et Shariari, D.. 2022. « Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ». Communication lors de la conférence : IAARHIES 280th International Conference on Engineering & Technology, ICET (Vancouver, BC, Canada, Feb. 24-25, 2022).
Amjadian, Amir, Chatelain, Jean-François et Shahriari, Davood.
2022.
« Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ».
Journal of Advanced Research in Engineering & Technology, vol. 6, nº 1.
pp. 1-5.
Amor, Sabrine Ben, Zongo, Floriane, Louhichi, Borhen, Tahan, Antoine et Brailovski, Vladimir.
2022.
« Dimensional deviation prediction model based on scale and material concentration effects for LPBF process ».
In 1st International Additive Manufacturing Conference, IAM (Lisbon, Portugal, Oct. 19-20, 2022)
American Society of Mechanical Engineers.
Arkhazloo, Nima Bohlooli, Bazdidi-Tehrani, Farzad, Jadidi, Mohammad, Morin, Jean-Benoit et Jahazi, Mohammad.
2022.
« Determination of temperature distribution during heat treatment of forgings: Simulation and experiment ».
Heat Transfer Engineering, vol. 43, nº 12.
pp. 1041-1064.
Arslane, Mustapha, Slamani, Mohamed, Aoufi, Belkacem et Chatelain, Jean-François.
2022.
« Locator placement optimization during machining turbine blades using genetic algorithm ».
In ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
pp. 1169-1173.
Azzaz, Riadh, Kaveh, Kianoosh, Morin, Jean-Benoit, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira. 2022. « Slag characterization regarding refractory wear in EAF steelmaking route ». Affiche présentée lors de la conférence : 61st Annual Conference of Metallurgists (COM) (Montreal, QC, Canada, Aug. 21-24, 2022).
Bahri, Haithem, Songmene, Victor et Kouam, Jules.
2022.
« Experimental investigation on part quality and dust emission during minimum quantity lubricated (MQL) edge finishing of granite ».
Micromachines, vol. 13, nº 10.
Barroeta Robles, J., Dubé, M., Hubert, P. et Yousefpour, A..
2022.
« Repair of thermoplastic composites: an overview ».
Advanced Manufacturing: Polymer and Composites Science, vol. 8, nº 2.
pp. 68-96.
Barroeta Robles, J., Guthrie, A., Dubé, M., Hubert, P. et Yousefpour, A..
2022.
« An approach to the repair of thermoplastic composites using resistance welding with a hybrid heating element ».
In International SAMPE Technical Conference (Charlotte, NC, USA, May 23-26, 2022)
Society for the Advancement of Material and Process Engineering.
Bechara, H., Zemouri, R., Tahan, A., Kedjar, B., Merkhouf, A. et Al-haddad, K..
2022.
« Non-invasive anomaly diagnosis for hydro electrical generators rotor inter-turn short-circuit detection using stray flux and the VAE ».
In International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022)
pp. 1855-1861.
Piscataway, NJ, USA : IEEE.
Ben Amor, Sabrine, Tahan, Antoine et Louhichi, Borhen.
2022.
« The impact of geometric complexity on printing time and cost for additive manufacturing (AM) process ».
In Advances in Mechanical Engineering and Mechanics II : Selected Papers from the 5th Tunisian Congress on Mechanics, CoTuMe (En ligne, Mar. 22-24, 2021)
Coll. « Lecture Notes in Mechanical Engineering »
pp. 203-210.
Springer Science and Business Media Deutschland GmbH.
Chabot, Olivier, Lessard, Larry et Dubé, Martine.
2022.
« A novel flax fibre composite material for stringed instrument fingerboards ».
Journal of Reinforced Plastics and Composites, vol. 41, nº 17-18.
pp. 670-678.
Chunping, Zhang, Loucif, Abdelhalim, Jahazi, Mohammad et Morin, Jean Benoit.
2022.
« FEM simulation of the effect of mold initial temperature on carbon macrosegregation in large-size steel ingots ».
In 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap (Kyoto, Japan - En ligne, Oct. 14-17, 2021)
Coll. « Materials Science Forum », vol. 1053.
pp. 258-263.
Trans Tech Publications. Côté, R., Ancé, S., Charlon, S., Soulestin, J., Demers, V. et Demarquette, N.. 2022. « Impact of the process parameters on printing pressure experienced in material extrusion additive manufacturing of highly-filled polymer (MEAM-HP) ». Communication lors de la conférence : 37th International Conference of the Polymer Processing Society (PPS-37) (Fukuoka, Japan, Apr. 11-15, 2022).
de Oliveira-Filho, Adaiton Moreira, Cambron, Philippe et Tahan, Antoine.
2022.
« Condition monitoring of wind turbine main bearing using SCADA data and informed by the principle of energy conservation ».
In Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022)
pp. 276-282.
IEEE.
Dollon, Quentin, Antoni, Jérôme, Tahan, Antoine, Gagnon, Martin et Monette, Christine.
2022.
« A fast collapsed Gibbs sampler for frequency domain operational modal analysis ».
Mechanical Systems and Signal Processing, vol. 173.
Dourandish, Simin, Champliaud, Henri, Morin, Jean -Benoit et Jahazi, Mohammad.
2022.
« Microstructure-based finite element modeling of a martensitic stainless steel during hot forging ».
International Journal of Advanced Manufacturing Technology, vol. 123, nº 7-8.
pp. 2833-2851.
Ebacher, L., Jahazi, M., Morin, J. B. et Ritchey, B..
2022.
« Thermomechanical study of H13 hot forged bars ».
In 4th International Ingot Casting Rolling Forging, ICRF 2022 - Conference Proceedings (Pittsburgh, PA, USA, June 21-23, 2022)
pp. 26-37.
Association for Iron and Steel Technology, AISTECH.
El-Hadad, Shimaa, Samuel, Agnes M., Samuel, Fawzy H., Doty, Herbert W. et Songmene, Victor.
2022.
« Effect of Bi and Ca on the solidification parameters of Sr-Modified Al-S-Cu (Mg) alloys ».
Materials, vol. 15, nº 19.
Eres-Castellanos, Adriana, Zorgani, Muftah, Shahriari, Davood, Romanica, Radu, Jimenez, Jose Antonio, Garcia-Mateo, Carlos et Jahazi, Mohammad.
2022.
« Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel ».
Journal of Materials Research and Technology, vol. 18.
pp. 3428-3442.
Fayed, Eslam M., Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2022.
« Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling ».
Materials Science and Engineering A, vol. 838.
Feujofack Kemda, B. V., Barka, N., Jahazi, M. et Osmani, D..
2022.
« Multi-objective optimization of process parameters in resistance spot welding of A36 mild steel and hot dipped galvanized steel sheets using non-dominated sorting genetic algorithm ».
Metals and Materials International, vol. 28, nº 2.
pp. 487-502.
Ghaffarishahri, Seyedmorteza et Rivest, Louis.
2022.
« A prototype of an automated feature recognition algorithm for aerospace sheet metal parts ».
Computer-Aided Design and Applications, vol. 19, nº 4.
pp. 624-661.
Ghodrati, Neda, Baiteche, Mounir, Loucif, Abdelhalim, Gallego, Paloma Isabel, Jean-Benoit, Morin et Jahazi, Mohammad.
2022.
« Influence of hot top height on macrosegregation and material yield in a large-size cast steel ingot using modeling and experimental validation ».
Metals, vol. 12, nº 11.
Grine, Madani, Slamani, Mohamed, Arslane, Mustapha et Chatelain, Jean-François.
2022.
« Assessment of the hole quality during drilling alfa fiber (Stipa tenacissima) reinforced composites ».
In ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
pp. 2023-2028.
Guerineau, Julia, Bricogne, Matthieu, Rivest, Louis et Durupt, Alexandre.
2022.
« Organizing the fragmented landscape of multidisciplinary product development: a mapping of approaches, processes, methods and tools from the scientific literature ».
Research in Engineering Design, vol. 33.
pp. 307-349.
Hernandez-Sandoval, J., Zedan, Y., Songmene, V., Abdelaziz, M. H., Samuel, F. H. et Garza-Elizondo, G. H..
2022.
« Effect of minor addition of Ni and Zr on the high-temperature performance of Al-Si-Cu-Mg cast alloys ».
International journal of metalcasting, vol. 16, nº 3.
pp. 1235-1251.
Houria, Manel, Matougui, Nedjoua, Mehdi, Brahim, Kherrouba, Nabil et Jahazi, Mohammad.
2022.
« Effect of plastic anisotropy on the kinetics of static softening in AA2024-T3 aluminum alloy ».
Metals and Materials International, vol. 28.
pp. 2042-2058.
Ibrahim, R., Zemouri, R., Tahan, A., Lafleur, F., Kedjar, B., Merkhouf, A. et Al-haddad, K..
2022.
« Anomaly detection for large hydrogenerators using the variational autoencoder based on vibration signals ».
In International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022)
pp. 1609-1615.
Piscataway, NJ, USA : IEEE.
Jamshidi, Maryam, Chatelain, Jean-François, Rimpault, Xavier et Balazinski, Marek.
2022.
« Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming ».
International Journal of Advanced Manufacturing Technology, vol. 121, nº 11-12.
pp. 8127-8142.
Jamshidi, Maryam, Chatelain, Jean-François, Rimpault, Xavier et Balazinski, Marek.
2022.
« Tool condition monitoring using machine tool spindle electric current and multiscale analysis while milling steel alloy ».
Journal of Manufacturing and Materials Processing, vol. 6, nº 5.
Kaveh, Kianoosh, Morin, Jean-Benoit, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira.
2022.
« Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking ».
In 8th International Congress on the Science and Technology of Steelmaking (ICS) (Montreal, QC, Canada, Aug. 02-04, 2022)
pp. 199-206.
Association for Iron & Steel Technology.
Kavyani, M., Ebrahimi, G. R., Ezatpour, H. R. et Jahazi, M..
2022.
« Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process ».
Journal of Magnesium and Alloys, vol. 10, nº 6.
pp. 1640-1662.
Kouam, Jules, Songmene, Victor, Bahloul, Ali et Samuel, Agnes M..
2022.
« Characterization of Si and SiO2 in dust emitted during granite polishing as a function of cutting conditions ».
Materials, vol. 15, nº 11.
Lessard, F., Dubé, M. et Laberge Lebel, L..
2022.
« A comprehensive model of the deconsolidation behaviour of unidirectional carbon fibre reinforced thermoplastic composites ».
Composites Part A: Applied Science and Manufacturing, vol. 163.
Lessard, F., Dubé, M. et Laberge Lebel, L..
2022.
« A model of multi-die thermoplastic pultrusion ».
Composites Part B: Engineering, vol. 247.
Loucif, Abdelhalim, Chunping, Zhang, Morin, Jean-Benoît et Jahazi, Mohammad.
2022.
« A FEM analysis on the influence of manganese on carbon and chromium macrosegregation in large size steel ingot ».
In 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap
Coll. « Materials Science Forum », vol. 1053.
pp. 252-257.
Trans Tech Publications.
Mahmoud, M. G., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H..
2022.
« Effect of rare earth metals (Ce and La) addition on the performance of Al-Si-Cu-Mg Cast Alloys ».
International Journal of Metalcasting, vol. 16, nº 3.
pp. 1164-1190.
Mahmoud, M. G., Zedan, Y., Samuel, A. M., Songmene, V. et Samuel, F. H..
2022.
« The use of rare earth metals in AlSiCu casting alloys ».
International Journal of Metalcasting, vol. 16, nº 2.
pp. 535-552.
Majdi, Seyed Mohammad, Tafti, Atefeh Ayatollahi, Demers, Vincent, Vachon, Guillem et Brailovski, Vladimir.
2022.
« Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding ».
Powder Metallurgy, vol. 65, nº 2.
pp. 170-180.
Martin, Romain Georges, Johansson, Christer, Tavares, Jason Robert et Dubé, Martine.
2022.
« Material selection methodology for an induction welding magnetic susceptor based on hysteresis losses ».
Advanced Engineering Materials, vol. 24, nº 3.
Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2022.
« Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys ».
Journal of Adhesion Science and Technology, vol. 36, nº 3.
pp. 221-239.
Mathieu, Ronan, Charfi, Mohamed Ali, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane, Serra, Roger et Lebrun, Gilbert.
2022.
« Effect of graphene additive on cutting forces and temperature during the trimming process of CFRP ».
International Journal of Advanced Manufacturing Technology, vol. 122, nº 9-10.
pp. 3969-3981.
Mechta, Ahlem, Slamani, Mohamed, Zaoui, Moussa et Chatelain, Jean-François.
2022.
« A comparative evaluation of the performance of three CNC machine tools ».
In ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
pp. 686-691.
Mechta, Ahlem, Slamani, Mohamed, Zaoui, Moussa, Mayer, René et Chatelain, Jean-François.
2022.
« Correlation assessment and modeling of intra-axis errors of prismatic axes for CNC machine tools ».
International Journal of Advanced Manufacturing Technology, vol. 120.
pp. 5093-5115.
Miclette, Olivier, Côté, Raphaël, Demers, Vincent et Brailovski, Vladimir.
2022.
« Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach ».
Additive Manufacturing, vol. 60, nº Part A.
Montlahuc, J., Polette, A., Tahan, A., Pernot, J. P. et Rivest, L..
2022.
« Multi-source point cloud semantic segmentation using neural network ».
In 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission III (Nice, France, June 06-11, 2022)
Coll. « International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences », vol. XLIII-B3-2022.
pp. 515-522.
International Society for Photogrammetry and Remote Sensing.
Nassar, M., Guizani, L., Nollet, M. J. et Tahan, A..
2022.
« Seismic reliability assessment of base-isolated bridges in Quebec ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 49, nº 2.
pp. 242-254.
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2022.
« Effects of temperature, analysis and modelling uncertainties on the reliability of base-isolated bridges in Eastern Canada ».
Structures, vol. 37.
pp. 295-304.
Pham, Quang Hung, Antoni, Jérôme, Tahan, Antoine, Gagnon, Martin et Monette, Christine.
2022.
« Simulation of non-Gaussian stochastic processes with prescribed rainflow cycle count using short-time Fourier transform ».
Probabilistic Engineering Mechanics, vol. 68.
Pham, Quang Hung, Gagnon, Martin, Antoni, Jérôme, Tahan, Antoine et Monette, Christine.
2022.
« Prediction of hydroelectric turbine runner strain signal via cyclostationary decomposition and kriging interpolation ».
Renewable Energy, vol. 182.
pp. 998-1011.
Proteau, Antoine, Zemouri, Ryad, Tahan, Antoine, Thomas, Marc, Bounouara, Wafa et Agnard, Stéphane.
2022.
« CNC machining quality prediction using variational autoencoder: A novel industrial 2 TB dataset ».
In Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022)
pp. 360-367.
Piscataway, NJ, USA : IEEE.
Sadeghifar, Morteza, Javidikia, Mahshad, Songmene, Victor et Jahazi, Mohammad.
2022.
« A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates ».
International Journal of Advanced Manufacturing Technology, vol. 121, nº 5-6.
pp. 3977-3987.
Salem, S., Hamed, M., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H..
2022.
« Evolution and methods of residual stresses measurement in Al-Si-Cu-Mg Castings : Role of heat treatment ».
International Journal of Metalcasting, vol. 16, nº 3.
pp. 1488-1506.
Samuel, A. M., Zedan, Y., Doty, H. W., Songmene, V. et Samuel, F. H..
2022.
« Role of the addition of La and Ce on the cooling characteristics and porosity formation in A356 and A413 alloys ».
International Journal of Metalcasting, vol. 16, nº 2.
pp. 553-572.
Samuel, Ehab, Nabawy, Ahmed M., Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy H..
2022.
« Effect of Zr and Ti addition and aging treatment on the microstructure and tensile properties of Al-2%Cu-based alloys ».
Materials, vol. 15, nº 13.
Slamani, M., Chafai, H. et Chatelain, J. F..
2022.
« Effect of milling parameters on the surface quality of a flax fiber-reinforced polymer composite ».
Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering.
Sougavabar, Mahmoud Alipour, Niknam, Seyed Ali, Davoodi, Behnam et Songmene, Victor.
2022.
« Milling Al520-MMC reinforced with SiC particles and additive elements Bi and Sn ».
Materials, vol. 15, nº 4.
Sripada, Jagannadh, Tian, Yuan, Chadha, Kanwal, Saha, Gobinda, Jahazi, Mohammad, Spray, John et Aranas, Clodualdo.
2022.
« Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel ».
Materials Characterization, vol. 192.
Tabaie, Seyedmohammad, Rezai-Aria, Farhad, Flipo, Bertrand C. D. et Jahazi, Mohammad.
2022.
« Dissimilar linear friction welding of selective laser melted Inconel 718 to forged Ni-based superalloy AD730: Evolution of strengthening phases ».
Journal of Materials Science and Technology, vol. 96.
pp. 248-261.
Tagiuri, Zakaria Ahmed M., Dao, Thien-My, Samuel, Agnes Marie et Songmene, Victor.
2022.
« A numerical model for predicting the effect of tool nose radius on machining process performance during orthogonal cutting of AISI 1045 Steel ».
Materials, vol. 15, nº 9.
Tagiuri, Zakaria Ahmed M., Dao, Thien-My, Samuel, Agnes Marie et Songmene, Victor.
2022.
« Numerical prediction of the performance of chamfered and sharp cutting tools during orthogonal cutting of AISI 1045 steel ».
Processes, vol. 10, nº 11.
Vedaei-Sabegh, Ali, Morin, Jean-Benoît, Champliaud, Henri et Jahazi, Mohammad.
2022.
« Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots ».
Journal of Materials Research and Technology, vol. 21.
pp. 3412-3424.
Vedaei-Sabegh, Ali, Morin, Jean-Benoît et Jahazi, Mohammad.
2022.
« Influence of thermally grown oxide layers thickness on temperature evolution during the forging of large size steel ingots ».
Materials Chemistry and Physics, vol. 275.
Zedan, Y., Songmene, V., Samuel, A. M., Samuel, F. H. et Doty, H. W..
2022.
« Effects of free-cutting elements addition on the microstructure, hardness, and machinability of Al-11%Si-Cu-Mg casting alloys ».
International Journal of Metalcasting, vol. 16, nº 4.
pp. 1915-1931.
Zedan, Yasser, Garza-Elizondo, Guillermo H., Tash, Mahmoud, Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy Hosny.
2022.
« Effect of intermetallics and drill materials on the machinability of Al-Si cast alloys ».
Materials, vol. 15, nº 3.
Zedan, Yasser, Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy H..
2022.
« Effects of trace elements on the microstructural and machinability characteristics of AlSiCuMg castings ».
Materials, vol. 15, nº 1.
Zedan, Yasser, Songmene, Victor, Samuel, Agnes M., Samuel, Fawzy H. et Doty, Herbert W..
2022.
« Assessment of the influence of additives on the mechanical properties and machinability of Al-11%Si cast alloys: Application of DOE and ANOVA methods ».
Materials, vol. 15, nº 9.
Zhang, Chunping, Loucif, Abdelhalim, Jahazi, Mohammad et Morin, Jean-Benoit.
2022.
« FE modelling and prediction of macrosegregation patterns in large size steel ingots: Influence of filling rate ».
Metals, vol. 12, nº 1.
2021
Amor, Sabrine Ben, Zongo, Floriane, Louhichi, Borhen, Brailovski, Vladimir et Tahan, Antoine.
2021.
« Classification of dimensional deviation in additive manufacturing LPBF process for AlSi10Mg alloy according to ISO 286 and ANSI B4.2 ».
In 41st Computers and Information in Engineering Conference, CIE 2021, Held as Part of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021 (En ligne, Aug. 17-19, 2021)
American Society of Mechanical Engineers (ASME).
Arslane, Mustapha, Slamani, Mohamed et Chatelain, Jean-François.
2021.
« Development and validation of a machining fixture for complex-shaped components based on Pluckerian matrix approach and SDT concept ».
International Journal of Advanced Manufacturing Technology, vol. 114.
pp. 1697-1716.
Azzouni, Mohamed, Demers, Vincent et Dufresne, Louis.
2021.
« Mold filling simulation and experimental investigation of metallic feedstock used in low-pressure powder injection molding ».
International Journal of Material Forming, vol. 14, nº 5.
pp. 961-972.
Bahri, Haithem, Songmene, Victor, Kouam, Jules, Samuel, Agnes Marie et Samuel, Fawzy Hosny.
2021.
« CNC edge finishing of granite: Effect of machining conditions on part quality, cutting forces, and particle emissions ».
Materials, vol. 14, nº 21.
Bohlooli Arkhazloo, Nima, Bazdidi-Tehrani, Farzad, Morin, Jean-Benoît et Jahazi, Mohammad.
2021.
« Optimization of furnace residence time and loading pattern during heat treatment of large size forgings ».
International Journal of Advanced Manufacturing Technology, vol. 113, nº 9-10.
pp. 2447-2460.
Boton, Conrad, Rivest, Louis, Ghnaya, Oussama et Chouchen, Moataz.
2021.
« What is at the Root of Construction 4.0: A systematic review of the recent research effort ».
Archives of Computational Methods in Engineering, vol. 28, nº 4.
pp. 2331-2350.
Bouissa, Yassine, Zorgani, Muftah, Shahriari, Davood, Champliaud, Henri, Morin, Jean-Benoît et Jahazi, Mohammad.
2021.
« Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 52, nº 5.
pp. 1883-1900.
Bourgault, Mario, Pellerin, Robert, Boton, Conrad, Iordanova, Ivanka, Rivest, Louis, Danjou, Christophe, Perrier, Nathalie, Forgues, Daniel, Poirier, Erik et Joblot, Laurent.
2021.
« Transformer le secteur de la construction par le numérique : Un chantier ambitieux et nécessaire ».
In
Le Québec économique 9 : Perspectives et défis de la transformation numérique.
pp. 433-456. Montréal, Québec : Cirano.
Brassard, David, Dubé, Martine et Tavares, Jason R..
2021.
« Modelling resistance welding of thermoplastic composites with a nanocomposite heating element ».
Journal of Composite Materials, vol. 55, nº 5.
pp. 625-639.
Castillo-Morales, Arquimedes, Rimpault, Xavier, Chatelain, Jean-François et Lebrun, Gilbert.
2021.
« Temperature study during the edge trimming of carbon fiber-reinforced plastic [0]8 /ti6al4v stack material ».
Journal of Composites Science, vol. 5, nº 5.
Chadha, K., Aranas, C. et Jahazi, M..
2021.
« Effect of double hit hot deformation on the evolution of dynamically transformed ferrite ».
Metals and Materials International, vol. 27, nº 11.
pp. 4307-4321.
Chatenet, Q., Remy, E., Gagnon, M., Fouladirad, M. et Tahan, A. S..
2021.
« Modeling cavitation erosion using non-homogeneous gamma process ».
Reliability Engineering and System Safety, vol. 213.
Chatenet, Quentin, Tahan, Antoine S., Fouladirad, Mitra, Gagnon, Martin et Remy, Emmanuel.
2021.
« Maintenance strategies comparison for francis turbine runner subjected to cavitation ».
Sustainability, vol. 13, nº 19.
Cognet, Bruno, Pernot, Jean-Philippe, Rivest, Louis et Danjou, Christophe.
2021.
« Digital maturity models: Comparing manual and semi-automatic similarity assessment frameworks ».
International Journal of Product Lifecycle Management, vol. 13, nº 4.
pp. 291-316.
Côté, Raphaël, Azzouni, Mohamed et Demers, Vincent.
2021.
« Impact of binder constituents on the moldability of titanium-based feedstocks used in low-pressure powder injection molding ».
Powder Technology, vol. 381.
pp. 255-268.
Côté, Raphaël, Azzouni, Mohamed, Ghanmi, Oussema, Kapoor, Sarthak et Demers, Vincent.
2021.
« Impact of rheological model on numerical simulation of low-pressure powder injection moulding ».
Powder Metallurgy, vol. 64, nº 1.
pp. 8-16.
Danouj, B., Tahan, S. A., David, E. et Lotfi, M..
2021.
« Partial discharges location in power transformers using piezoceramic sensors ».
International Journal of Electrical and Computer Engineering, vol. 11, nº 3.
pp. 1942-1950. Demers, Vincent, Lamarre, Simon et Chatelain, Jean-François (inventeurs) 16 février 2021. « Low-pressure powder injection molding machine, kit and method ». École de technologie supérieure (titulaire(s)). US 10,919,092.
Dollon, Q., Antoni, J., Tahan, A., Gagnon, M. et Monette, C..
2021.
« Operational Modal Analysis of hydroelectric turbines using an order based likelihood approach ».
Renewable Energy, vol. 165.
pp. 799-811.
Dollon, Q., Monette, C., Gagnon, M., Tahan, A. et Antoni, J..
2021.
« Calibration of critical speed predictions using experimental measurements ».
In 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 774.
UK : IOP Publishing.
Dourandish, S., Jahazi, M., Ebrahimi, G. R. et Ebacher, L..
2021.
« Influence of eutectic phase precipitation on cracking susceptibility during forging of a martensitic stainless steel for turbine shaft applications ».
Journal of Materials Research and Technology, vol. 13.
pp. 260-270.
Dupont-Marillia, Frederic, Jahazi, Mohammad et Belanger, Pierre.
2021.
« Phased array probe for the inspection of large steel forgings ».
Cogent Engineering, vol. 8, nº 1.
Elgnemi, Tarek, Songmene, Victor, Kouam, Jules, Jun, Martin B. G. et Samuel, Agnes Marie.
2021.
« Experimental investigation on dry routing of CFRP composite: Temperature, forces, tool wear, and fine dust emission ».
Materials, vol. 14, nº 19.
Elgnemi, Tarek-Shaban-Mohamed, Jun, Martin Byung-Guk, Songmene, Victor et Samuel, Agnes Marie.
2021.
« Milling performance of CFRP composite and atomised vegetable oil as a function of fiber orientation ».
Materials, vol. 14, nº 8.
Eres-Castellanos, Adriana, Hidalgo, Javier, Zorgani, Muftah, Jahazi, Mohammad, Toda-Caraballo, Isaac, Caballero, Francisca G. et Garcia-Mateo, Carlos.
2021.
« Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach ».
Materials & Design, vol. 197.
Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2021.
« Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ».
Scientific Reports, vol. 11, nº 1.
Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2021.
« Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ».
Metals, vol. 11, nº 1.
Feujofack Kemda, B. V., Barka, N., Jahazi, M. et Osmani, D..
2021.
« Modeling of phase transformation kinetics in resistance spot welding and investigation of effect of post weld heat treatment on weld microstructure ».
Metals and Materials International, vol. 27, nº 5.
pp. 1205-1223.
Ghanmi, O. et Demers, V..
2021.
« Molding properties of titanium-based feedstock used in low-pressure powder injection molding ».
Powder Technology, vol. 379.
pp. 515-525.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2021.
« 3D FE modeling and experimental analysis of residual stresses and machining characteristics induced by dry, MQL, and wet turning of AA6061-T6 ».
Machining Science and Technology, vol. 25, nº 6.
pp. 957-983.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2021.
« Analysis and optimization of surface roughness in turning of AA6061-T6 under various environments and parameters ».
In 9th CIRP Conference on High Performance Cutting (En ligne, May 24-26, 2021)
Coll. « Procedia CIRP », vol. 101.
pp. 17-20.
Elsevier.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2021.
« Low and high speed orthogonal cutting of AA6061-T6 under dry and flood-coolant modes: Tool wear and residual stress measurements and predictions ».
Materials, vol. 14, nº 15.
Khan, Makarim, Shahriari, Davood, Jahazi, Mohammad et Morin, Jean-Benoit.
2021.
« Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel ».
Frontiers in Mechanical Engineering, vol. 7.
Lengaigne, J., Gunther, J., Teasdale, J. T., Toupin-Guay, V., Dubé, M. et Tabiai, I..
2021.
« Polypropylene microfiber extrusion by hot melt rotary jet spinning for non-woven membrane manufacturing ».
In Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 27-30, 2021)
Coll. « Progress in Canadian Mechanical Engineering », vol. 4.
Canadian Society of Mechanical Engineers.
Liu, J. H., Binot, N., Delagnes, D. et Jahazi, M..
2021.
« Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel ».
Journal of Materials Research and Technology, vol. 12.
pp. 234-242.
Loucif, Abdelhalim, Morin, Jean Benoit, Lapierre-Boire, Louis Philippe et Jahazi, Mohammad.
2021.
« Subsurface crack initiation and propagation in an open dieforged high strength steel: A microstructural analysis ».
In 9th International Conference on Engineering and Innovative Materials (ICEIM 2020) (Singapor, Singapor, Sept. 4-6, 2020)
Coll. « Key Engineering Materials », vol. 880.
pp. 29-34.
Trans Tech Publications Ltd.
Macloud, Alexandre, Zeighami, Ali, Aissaoui, Rachid et Rivest, Louis.
2021.
« Extracting grasping cues from pistol-shaped tools for digital human models ».
Computer-Aided Design and Applications, vol. 18, nº 6.
pp. 1167-1185.
Marani, Mohsen, Zeinali, Mohammadjavad, Songmene, Victor et Mechefske, Chris K..
2021.
« Tool wear prediction in high-speed turning of a steel alloy using long short-term memory modelling ».
Measurement: Journal of the International Measurement Confederation, vol. 177.
pp. 704-713.
Martin, R. G., Johansson, C., Tavares, J. R. et Dubé, M..
2021.
« Heating rate prediction for induction welding magnetic susceptors ».
In 36th Technical Conference of the American Society for Composites 2021: Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, ASC 2021 (En ligne, Sept. 20-22, 2021)
pp. 11-23.
DEStech Publications.
Martin, Romain G., Johansson, Christer, Tavares, Jason R. et Dubé, Martine.
2021.
« The benefits of joining thermoplastic sandwich structures using induction welding for lunar environment applications ».
In CASI ASTRO Conference (En ligne, Nov. 16-19, 2021)
CASI. Martin, Romain, Johansson, Christer, Tavares, R. Jason et Dubé, Martine. 2021. « The benefits of induction welding in joining of thermoplastic sandwich structures for lunar environment applications ». Communication lors de la conférence : Canadian Lunar Workshop (Saint-Hubert, QC, Canada, June 14-16, 2021).
Mohamed-Amine, Alliche, Mohamed, Djennane, Abdelhakim, Djebara et Songmene, Victor.
2021.
« Predictive analytical modeling of thermo-mechanical effects in orthogonal machining ».
Materials, vol. 14, nº 24.
Moradi, Mahmoud, Meiabadi, Mohammad Saleh et Demers, Vincent.
2021.
« A numerical investigation of friction stir welding parameters in joining dissimilar aluminium alloys using finite element method ».
International Journal of Manufacturing Research, vol. 16, nº 1.
pp. 32-51.
Nikbakht, Roghayeh, Saadati, Mohammad, Kim, Taek-Soo, Jahazi, Mohammad, Kim, Hyoung Seop et Jodoin, Bertrand.
2021.
« Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy ».
Surface & Coatings Technology, vol. 425.
Olufayo, Oluwole, Songmene, Victor, Kenné, Jean-Pierre et Ayomoh, Michael.
2021.
« Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels ».
International Journal of Production Research, vol. 59, nº 17.
pp. 5352-5371.
Pham, Quang Hung, Gagnon, Martin, Antoni, Jérôme, Tahan, Antoine et Monette, Christine.
2021.
« Rainflow-counting matrix interpolation over different operating conditions for hydroelectric turbine fatigue assessment ».
Renewable Energy, vol. 172.
pp. 465-476.
Quang Hung, Pham, Gagnon, Martin, Antoni, Jérôme, Tahan, Antoine et Monette, Christine.
2021.
« A proposal for the dynamic strain interpolation on hydroelectric turbine runner ».
In 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 774.
UK : IOP Publishing.
Samuel, Agnes, Zedan, Yasser, Doty, Herbert, Songmene, Victor et Samuel, Fawzy H..
2021.
« A review study on the main sources of porosity in Al-Si cast alloys ».
Advances in Materials Science and Engineering, vol. 2021.
Slamani, Mohamed, Chatelain, Jean-Francois, Il, Alexandre et Balazinski, Marek.
2021.
« Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts ».
Physica A: Statistical Mechanics and its Applications, vol. 570.
Slamani, Mohamed, Karabibene, Nouha, Chatelain, Jean-François et Beauchamp, Yves.
2021.
« Edge trimming of flax fibers and glass fibers reinforced polymers composite – An experimental comparative evaluation ».
International Journal of Material Forming, vol. 14, nº 6.
pp. 1497-1510.
Slamani, Mohamed, Karabibene, Nouha, Chatelain, Jean-Francois, Rimpault, Xavier et Beauchamp, Yves.
2021.
« Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design ».
Measurement: Journal of the International Measurement Confederation, vol. 184.
Souilah, Mondher, Tahan, Antoine et Abacha, Nabil.
2021.
« A small displacement torsor model to evaluate machining accuracy in the presence of locating and machine geometric errors ».
In Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021 (Charlottetown, PE, Canada, June 27-30, 2021)
Coll. « Progress in Canadian Mechanical Engineering », vol. 4.
Tabaie, Seyedmohammad, Rezai-Aria, Farhad, Flipo, Bertrand C. D., Cormier, Jonathan et Jahazi, Mohammad.
2021.
« Post-weld heat treatment of additively manufactured inconel 718 welded to forged ni-based superalloy AD730 by linear friction welding ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 52, nº 8.
pp. 3475-3488.
Tabaie, Seyedmohammad, Rézaï-Aria, Farhad, Flipo, Bertrand C. D. et Jahazi, Mohammad.
2021.
« Grain size and misorientation evolution in linear friction welding of additively manufactured IN718 to forged superalloy AD730™ ».
Materials Characterization, vol. 171.
Tafti, Atefeh A., Demers, Vincent, Majdi, Seyed M., Vachon, Guillem et Brailovski, Vladimir.
2021.
« Effect of thermal debinding conditions on the sintered density of low-pressure powder injection molded iron parts ».
Metals, vol. 11, nº 2.
Tafti, Atefeh A., Demers, Vincent, Vachon, Guillem et Brailovski, Vladimir.
2021.
« Effect of binder constituents and solids loading on the rheological behavior of irregular iron-based feedstocks ».
Journal of Manufacturing Science and Engineering, vol. 143, nº 3.
Tran, Dinh Son, Songmene, Victor et Ngo, Anh Dung.
2021.
« Regression and ANFIS-based models for predicting of surface roughness and thrust force during drilling of biocomposites ».
Neural Computing and Applications, vol. 33.
pp. 11721-11738.
Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J. F. et Achiche, S..
2021.
« Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters ».
In 14th International Conference on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP) (En ligne, Mar. 10-11, 2021)
pp. 43-52.
euspen.
Zedan, Y., Iben Houria, M., Vanderesse, N., Atmani, F., Mirakhorli, F., Nadeau, F., Demers, V. et Bocher, P..
2021.
« Fatigue properties of continuous wave and pulsed wave laser cold-wire welding of thick section AA6005-T6 aluminum alloys ».
International Journal of Fatigue, vol. 147.
Zedan, Yasser, Jabbari, Keyhan, Niknam, Seyed A. et Songmene, Victor.
2021.
« Machinability study of AA6061 under various heat treatment conditions ».
Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, vol. 45.
pp. 543-553.
Zorgani, M., Garcia-Mateo, C. et Jahazi, M..
2021.
« Effects of ausforming temperature on carbide-free bainite transformation and its correlation to the transformation plasticity strain in a medium C- Si-rich steel ».
Materials Characterization, vol. 176.
Zorgani, M., Garcia-Mateo, C. et Jahazi, M..
2021.
« Microstructural evolution during tempering of an ausformed carbide-free low temperature bainitic steel ».
Materials and Design, vol. 210.
2020
Ahmed, M. Zaid, Chadha, K., Reddy, S. R., Shahriari, D., Bhattacharjee, P. P. et Jahazi, M..
2020.
« Influence of process parameters on microstructure evolution during hot deformation of a Eutectic High-Entropy Alloy (EHEA) ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 51, nº 12.
pp. 6406-6420.
Aidibe, Ali, Tahan, Souheil Antoine et Nejad, Mojtaba Kamali.
2020.
« Interlaboratory empirical reproducibility study based on a GD&T benchmark ».
Applied Sciences, vol. 10, nº 14.
Aleyari, Alireza, Majidi, Omid, Bombardier, Nicolas, Pham, Xuan-Tan et Jahazi, Mohammad.
2020.
« Finite element and experimental analysis of the preheating stage of High Speed Blow Forming (HSBF) process ».
Journal of Manufacturing Processes, vol. 49.
pp. 10-17.
Ali, Ghalya, Demers, Vincent, Côté, Raphaël et Demarquette, Nicole R..
2020.
« Threshold concentration of surfactant agent in feedstocks used for low-pressure powder injection molding ».
Materials Performance and Characterization, vol. 9, nº 4.
Anagonou, Augias, Godjo, Thierry, Songmene, Victor et Tankpinou, Yvette.
2020.
« Étude des propriétés physico-mécaniques d’un béton hydraulique contenant des cendres de coques d’anacarde de tailles micrométriques et nanométriques substituant partiellement le ciment ».
Déchets Sciences et Techniques, nº 83.
pp. 39-48.
Anagonou, Augias, Songmene, Victor, Godjo, Thierry et Kouam, Jules.
2020.
« Recycling of West african cashew nut shells waste in asphalt concrete: Impact on the physico-mechanical properties of asphalt concrete ».
International Journal of Advanced Research and Publications, vol. 4, nº 2.
pp. 96-106.
Babanezhad, Kaveh, Aidibe, Ali, Foucault, Gilles, Tahan, Antoine et Bigeon, Jean.
2020.
« Improved Bi-Criterion flexible registration for fixtureless inspection of compliant parts ».
Precision Engineering, vol. 65.
pp. 116-129.
Bédard, Frédéric, Jahazi, Mohammad et Songmene, Victor.
2020.
« Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics ».
International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2.
pp. 333-342.
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2020.
« Reproducibility investigation of elicitation techniques in risk assessment for hydraulic turbines ».
Journal of Risk Research, vol. 23, nº 3.
pp. 297-312.
Blancke, Olivier, Komljenovic, Dragan, Tahan, Antoine, Amyot, Normand, Hudon, Claude, Boudreau, Jean-François et Lévesque, Mélanie.
2020.
« From data to asset health management in the context of hydropower generation: A holistic concept ».
In Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018)
pp. 258-266.
Cham, Switzerland : Springer International Publishing.
Bouissa, Y., Bohlooli, N., Shahriari, D., Champliaud, H., Morin, J. B. et Jahazi, M..
2020.
« FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ».
Journal of Manufacturing Processes, vol. 58.
pp. 592-605.
Carneiro, Thiago Bruno, Rodrigues, Samuel Filgueiras, Aranas, Clodualdo, Siciliano, Fulvio, Silva, Eden Santos, Reis, Gedeon Silva, Miranda, Edson Jansen Pedrosa, Leal, Valdemar Silva, Jahazi, Mohammad et Jonas, John Joseph.
2020.
« Retransformation of dynamically induced ferrite during physical simulation of Steckel mill hot rolling ».
Journal of Materials Research and Technology, vol. 9, nº 5.
pp. 10254-10264.
Chadha, K., Aranas, C., Shahriari, D., Jahazi, M. et Spray, J. G..
2020.
« The effect of retained work hardening on the driving force for dynamic transformation ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 51, nº 11.
pp. 5617-5622.
Chaieb, Oussama, Olufayo, Oluwole A., Songmene, Victor et Jahazi, Mohammad.
2020.
« Investigation on surface quality of a rapidly solidified Al–50%Si alloy component for deep-space applications ».
Materials, vol. 13, nº 15.
Chamanfar, A., Chentouf, S. M., Jahazi, M. et Lapierre-Boire, L. P..
2020.
« Austenite grain growth and hot deformation behavior in a medium carbon low alloy steel ».
Journal of Materials Research and Technology, vol. 9, nº 6.
pp. 12102-12114.
Champagne, Olivier et Pham, Xuan-Tan.
2020.
« Numerical simulation of moving heat source in arc welding using the Element-free Galerkin method with experimental validation and numerical study ».
International Journal of Heat and Mass Transfer, vol. 154.
Charfi, Mohamed Ali, Mathieu, Ronan, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane et Lebrun, Gilbert.
2020.
« Effect of graphene additive on flexural and interlaminar shear strength properties of carbon fiber-reinforced polymer composite ».
Journal of Composites Science, vol. 4, nº 4.
Chatenet, Quentin, Fouladirad, Mitra, Remy, Emmanuel, Gagnon, Martin, Tôn-Thât, Laurent et Tahan, Antoine.
2020.
« On the performance of the maximum likelihood estimation method for gamma process ».
In 29th European Safety and Reliability Conference (ESREL) (Hannover, Germany, Sept. 22-26, 2019)
pp. 943-950.
Research Publishing Services.
Chatenet, Quentin, Gagnon, Martin, Remy, Emmanuel, Fouladirad, Mitra et Tahan, Antoine.
2020.
« Stochastic modeling of cavitation erosion in francis runner ».
International Journal of Fluid Machinery and Systems, vol. 13, nº 1.
pp. 21-29.
Chegini, M., Aboutalebi, M. R., Seyedein, S. H., Ebrahimi, G. R. et Jahazi, M..
2020.
« Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map ».
Journal of Manufacturing Processes, vol. 56.
pp. 916-927.
Dang, Dinh-Dong, Pham, Xuan-Tan et Nguyen, Chi-Cong.
2020.
« Thermal performance prediction in the air gap of a rotor-stator configuration: effects of numerical models ».
Journal of Thermal Science and Engineering Applications, vol. 29, nº 1.
pp. 206-218.
Deluy, Marc-Claudel, Khay, Mohamed, Ngo, Anh Dung, Dubé, Martine et Ganesan, Rajamohan.
2020.
« Effects of environmental conditions on the axial tensioncompression fatigue behavior of carbon/epoxy plain-weave laminates containing flaws ».
Journal of Composite Materials, vol. 54, nº 27.
pp. 4215-4230.
Fayed, Eslam M., Shahriari, Davood, Saadati, Mohammad, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2020.
« Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ».
Materials, vol. 13, nº 11.
Feujofack Kemda, B. V., Barka, Noureddine, Jahazi, M. et Osmani, D..
2020.
« Optimization of resistance spot welding process applied to A36 mild steel and hot dipped galvanized steel based on hardness and nugget geometry ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 5-6.
pp. 2477-2491.
Ghaffarishahri, Seyedmorteza et Rivest, Louis.
2020.
« Feature recognition for structural aerospace sheet metal parts ».
Computer-Aided Design and Applications, vol. 17, nº 1.
pp. 16-43.
Ghaffarishahri, Seyedmorteza et Rivest, Louis.
2020.
« Feature-based model difference identification for aerospace sheet metal parts ».
Computer-Aided Design and Applications, vol. 18, nº 3.
pp. 443-467.
Jamshidi, Maryam, Rimpault, Xavier, Balazinski, Marek et Chatelain, Jean-François.
2020.
« Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 9-10.
pp. 3859-3868.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization ».
The International Journal of Advanced Manufacturing Technology, vol. 110, nº 9.
pp. 2669-2683.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 9-10.
4547–4565.
Kahwati, G., Tahan, A., Merkhouf, A., Hudon, C. et Al-Haddad, K..
2020.
« Reliability index for health monitoring of hydroelectric synchronous machine's insulation ».
In 2020 International Conference on Electrical Machines (Gothenburg, Sweden, Aug. 23-26, 2020)
pp. 1418-1423.
New York : IEEE.
Lamothe, Thibaud, Blain, Michel, Gagnon, Martin, Lonchampt, Jérôme et Tahan, Antoine.
2020.
« Technico-economic modelling of maintenance cost for hydroelectric turbine runners ».
In Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018)
pp. 238-245.
Cham, Switzerland : Springer International Publishing.
Loucif, Abdelhalim, Zhang, Chunping, Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe.
2020.
« Macrosegregation characteristics of ferrite and austenite stabilizer elements in large size high strength steel ingot ».
In 8th International Conference on Engineering and Innovative Materials (ICEIM 2019) (Tokyo, Japan, Sept. 06-08, 2019)
Coll. « Key Engineering Materials », vol. 846.
pp. 82-86.
Trans Tech Publications Ltd.
Marani, Mohsen, Songmene, Victor, Zeinali, Mohammadjavad, Kouam, Jules et Zedan, Yasser.
2020.
« Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al20 Mg2Si2Cu metal matrix composite using additives ».
Neural Computing and Applications, vol. 32.
pp. 8115-8126.
Marani, Mohsen, Zeinali, Mohammadjavad, Kouam, Jules, Songmene, Victor et Mechefske, Chris K..
2020.
« Prediction of cutting tool wear during a turning process using artificial intelligence techniques ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 1-2.
pp. 505-515.
Monajati, Hossein, Zoghlami, Mariem, Tongne, Amevi et Jahazi, Mohammad.
2020.
« Assessing microstructure-local mechanical properties in friction stir welded 6082-T6 aluminum alloy ».
Metals, vol. 10, nº 9.
Olufayo, Oluwole A., Boulaares, Mouhamed Dhafer et Songmene, Victor.
2020.
« Machining/machinability of Rene 65 superalloy for aerospace applications ».
In IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020)
Piscataway, NJ, USA : IEEE.
Pourzarei, Hamidreza, Rivest, Louis et Boton, Conrad.
2020.
« Cross-Pollination as a comparative analysis approach to comparing BIM and PLM: A literature review ».
In Product Lifecycle Management Enabling Smart X : 17th IFIP WG 5.1 International Conference, PLM 2020, Rapperswil, Switzerland, July 5–8, 2020, Revised Selected Papers (Rapperswil, Switzerland, July 05-08, 2020)
Coll. « IFIP Advances in Information and Communication Technology », vol. 594.
pp. 724-737.
Springer.
Proteau, Antoine, Zemouri, Ryad, Tahan, Antoine et Thomas, Marc.
2020.
« Dimension reduction and 2D-visualization for early change of state detection in a machining process with a variational autoencoder approach ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 11-12.
pp. 3597-3611.
Rohart, Vincent, Laberge Lebel, Louis et Dubé, Martine.
2020.
« Improved adhesion between stainless steel heating element and PPS polymer in resistance welding of thermoplastic composites ».
Composites Part B: Engineering, vol. 188.
pp. 72-83.
Rohart, Vincent, Lebel, Louis L. et Dubé, Martine.
2020.
« Influence of freeze/thaw cycling on the mechanical performance of resistance-welded carbon fibre/polyphenylene sulphide composite joints ».
Journal of Reinforced Plastics and Composites, vol. 39, nº 21-22.
Rohart, Vincent, Lebel, Louis Laberge et Dubé, Martine.
2020.
« Effects of environmental conditions on the lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ».
Composites Part B: Engineering, vol. 198.
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert, Beauchamp, Yves, Bocher, Philippe et Vanderesse, Nicolas.
2020.
« A study of the interlaminar fracture toughness of unidirectional flax/epoxy composites ».
Journal of Composites Science, vol. 4, nº 2.
Saadati, Yousef, Lebrun, Gilbert, Bouvet, Christophe, Chatelain, Jean-François et Beauchamp, Yves.
2020.
« Study of translaminar fracture toughness of unidirectional flax/epoxy composite ».
Composites Part C: Open Access, vol. 1.
Saadati, Yousef, Lebrun, Gilbert, Chatelain, Jean-François et Beauchamp, Yves.
2020.
« Experimental investigation of failure mechanisms and evaluation of physical/mechanical properties of unidirectional flax–epoxy composites ».
Journal of Composite Materials, vol. 54, nº 20.
pp. 2781-2801.
Sadeghifar, Morteza, Javidikia, Mahshad, Songmene, Victor et Jahazi, Mohammad.
2020.
« Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions ».
Simulation Modelling Practice and Theory, vol. 104.
Saidi, Mohamed Nejib, Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2020.
« Experimental evaluation of three local exhaust ventilation systems designed to reduce ultrafine dust emission during a polishing process ».
Aerosol Science and Engineering, vol. 4, nº 1.
pp. 9-17.
Shafiee, Ahad, Nili-Ahmadabadi, Mahmoud, Kim, Hyoung Seop et Jahazi, Mohammad.
2020.
« Development and microstructural characterization of a new wrought high entropy superalloy ».
Metals and Materials International, vol. 26, nº 5.
pp. 591-602.
Shnfir, Mohamed, Kouam, J. et Songmene, V..
2020.
« Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel ».
International Journal of Advanced Manufacturing Technology, vol. 110, nº 3-4.
pp. 617-627.
Slamani, Mohamed et Chatelain, Jean-François.
2020.
« Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of carbon fiber reinforced polymers ».
Measurement: Journal of the International Measurement Confederation, vol. 152.
Songmene, V. et Olufayo, O. A..
2020.
« Advances in fine and ultrafine particles emission and dispersion in machining: Cases of metals and granite ».
In Proceedings of 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020)
pp. 36-45.
IEEE. Tabaie, S., Rézaï-Aria, F. et Jahazi, M.. 2020. « Effect of pre-heat treatment on micro-segregation of nb in the microstructure of linear friction welded inconel 718 fabricated by selective laser melting ». Affiche présentée lors de la conférence : Conference of Metallurgists (Toronto, ON, Canada, Aug. 24-27, 2020).
Tabaie, Seyedmohammad, Rézaï-Aria, Farhad et Jahazi, Mohammad.
2020.
« Microstructure evolution of selective laser melted inconel 718: Influence of high heating rates ».
Metals, vol. 10, nº 5.
Tran, Dinh Son, Songmene, Victor, Ngo, Anh Dung et Kouam, Jules.
2020.
« Effects of reinforcements and cutting parameters on machinability of polypropylene-based biocomposite reinforced with biocarbon particles and chopped miscanthus fibers ».
International Journal of Advanced Manufacturing Technology, vol. 110, nº 11-12.
pp. 3423-3444.
Tran, Dinh Son, Songmene, Victor, Ngo, Anh Dung, Kouam, Jules, Rodriguez-Uribe, Arturo, Misra, Manjusri et Mohanty, Amar Kumar.
2020.
« Experimental investigation on machinability of polypropylene reinforced with miscanthus fibers and biochar ».
Materials, vol. 13, nº 5.
Vedaei-Sabegh, Ali, Morin, Jean-Benoit et Jahazi, Mohammad.
2020.
« Influence of nickel on high-temperature oxidation and characteristics of oxide layers in two high-strength steels ».
Steel Research International, vol. 91, nº 4.
Yeganefar, Ali, Niknam, Seyed Ali et Songmene, Victor.
2020.
« Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451 ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 44, nº 3.
pp. 427-439.
Zhang, C., Jahazi, M. et Tremblay, R..
2020.
« Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingots ».
International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2.
pp. 167-175.
Zhang, Chunping, Jahazi, Mohammad et Gallego, Paloma Isabel.
2020.
« On the impact of microsegregation model on the thermophysical and solidification behaviors of a large size steel ingot ».
Metals, vol. 10, nº 1.
Zongo, Floriane, Simoneau, Charles, Timercan, Anatolie, Tahan, Antoine et Brailovski, Vladimir.
2020.
« Geometric deviations of laser powder bedfused AlSi10Mg components: numerical predictions versus experimental measurements ».
International Journal of Advanced Manufacturing Technology, vol. 107.
pp. 1411-1436.
Zorgani, M., Garcia-Mateo, Carlos et Jahazi, M..
2020.
« The role of ausforming in the stability of retained austenite in a medium-C carbide-free bainitic steel ».
Journal of Materials Research and Technology, vol. 9, nº 4.
pp. 7762-7776. 2019
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2019.
« Tool condition monitoring method in milling process using wavelet transform and long short-term memory ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 153-161.
INSA.
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., Songmene, V. et Brochu, M..
2019.
« Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel ».
International Journal of Advanced Manufacturing Technology, vol. 104, nº 1-4.
pp. 141-157.
Al-Hashedi, Ashwaq A., Laurenti, Marco, Amine Mezour, Mohamed, Basiri, Tayebeh, Touazine, Heithem, Jahazi, Mohamed et Tamimi, Faleh.
2019.
« Advanced inorganic nanocomposite for decontaminating titanium dental implants ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 107, nº 3.
pp. 761-772.
Arfaoui, Mohamed Ameur, Dolez, Patricia I., Dubé, Martine et David, Éric.
2019.
« Preparation of a hydrophobic recycled jute-based nonwoven using a titanium dioxide/stearic acid coating ».
Journal of the Textile Institute, vol. 110, nº 1.
pp. 16-25.
Babanezhad, Kaveh, Foucault, Gilles, Sabri, Vahid, Tahan, Antoine et Bigeon, Jean.
2019.
« The fixtureless inspection of flexible parts based on semi-geodesic distance ».
Precision Engineering, vol. 59.
pp. 174-184.
Bahloul, Ali, Djebara, Abdelhakim, Saidi, Mohamed Nejib, Songmene, Victor, Villalpando, Fernando et Reggio, Marcelo.
2019.
« Computational and experimental analysis of ultrafine particle dispersion during granite polishing ».
Aerosol Science and Engineering, vol. 3, nº 1.
pp. 21-31.
Bahloul, Ali, Jorge Vanterpool, Rafael Francisco, Djebara, Abdelhakim, Songmene, Victor, Said, Mohamed Nejib, Kouam, Jules, Reggio, Marcelo et Villalpando, Fernando.
2019.
« Transformation du granit : Caractérisation et contrôle de la poussière de la silice émise par le polissage ».
Coll. « Rapports scientifiques », vol. R-1054.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 99 p.
Belanger, Pierre et Jahazi, Mohammad.
2019.
« Friction stir welded lap joint inspection using ultrasonic guided waves ».
In 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018)
Coll. « AIP Conference Proceedings », vol. 2102.
USA : AIP Publishing.
Ben Amor, Sabrine, Abdellaoui, Salah, Tahan, Antoine, Louhichi, Borhen et Tavares, João Manuel R. S..
2019.
« Choosing the best direction of printing for additive manufacturing process in medical applications using a new geometric complexity model based on part CAD data ».
In VipIMAGE : Proceedings of the VII ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (Porto, Portugal, Oct. 16-18, 2019)
Coll. « Lecture Notes in Computational Vision and Biomechanics », vol. 34.
pp. 679-692.
Springer Netherlands.
BEN Amor, Sabrine, Tahan, Antoine et Louhichi, Borhen.
2019.
« Proposition of a geometric complexity model for additive manufacturing process based on CAD ».
In 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019)
pp. 442-448.
Los Alamitos, CA, USA : IEEE Computer Society.
Ben Trad, Mohamed Aziz, Demers, Vincent et Dufresne, Louis.
2019.
« Effect of powder shape and size on rheological, thermal, and segregation properties of low-pressure powder injection molding feedstocks ».
Journal of Materials Engineering and Performance, vol. 28, nº 9.
pp. 5551-5562.
Blancke, Olivier, Combette, Amélie, Amyot, Normand, Komljenovic, Dragan, Lévesque, Mélanie, Hudon, Claude, Tahan, Antoine et Zerhouni, Noureddine.
2019.
« A predictive maintenance approach for complex equipment based on a failure mechanism propagation model ».
International Journal of Prognostics and Health Management, vol. 10, nº 1.
Boanta, C., Lessard, F., Laberge-Lebel, L., Dubé, M. et Robert, É..
2019.
« Impact of cellulose filaments on interlaminar properties, flammability and thermal degradation behaviour of polymer matrix composites ».
In ICCM22 : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2020)
pp. 1299-1310.
Melbourne, VIC : Engineers Australia.
Bohlooli Arkhazloo, Nima, Bouissa, Yassine, Bazdidi-Tehrani, Farzad, Jadidi, Mohammad, Morin, Jean-Benoit et Jahazi, Mohammad.
2019.
« Experimental and unsteady CFD analyses of the heating process of large size forgings in a gas-fired furnace ».
Case Studies in Thermal Engineering, vol. 14.
Bouissa, Yassine, Shahriari, Davood, Champliaud, Henri et Jahazi, Mohammad.
2019.
« Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ».
Case Studies in Thermal Engineering, vol. 13.
Brassard, David, Dubé, Martine et Tavares, Jason R..
2019.
« Resistance welding of thermoplastic composites with a nanocomposite heating element ».
Composites Part B: Engineering, vol. 165.
pp. 779-784.
Chadha, K., Jahazi, M. et Spray, John G..
2019.
« Effect of strain rate on the columnar to equiaxed transition in an as-cast medium-carbon low-alloy steel during hot deformation ».
In Materials Science and Technology (MS&T19) (Portland, OR, USA, Sept. 29-Oct. 3, 2019)
pp. 431-438.
Materials Science and Technology.
Chadha, K., Shahriari, Davood, Aranas, C. Jr., Lapierre-Boire, Louis-Philippe et Jahazi, Mohammad.
2019.
« On the role of chromium in dynamic transformation of austenite ».
Metals and Materials International, vol. 25, nº 3.
pp. 559-569.
Chatelain, Jean-François, Ouellet-Plamondon, C. M., Lasseur, B. et Kuate-Togue, H..
2019.
« Effect of additives on the machinability of glass fiber reinforced polymer ».
In
Materials Design and Applications II.
Coll. « Advanced Structured Materials », vol. 98.
pp. 295-312. Cham, Suisse : Springer Verlag.
Chatenet, Q., Gagnon, M., Tôn-Thât, L., Fouladirad, M., Remy, E. et Tahan, A. S..
2019.
« Stochastic modelling of cavitation erosion in Francis runner ».
In 29th IAHR Symposium on Hydraulic Machinery and Systems (Kyoto, Japan, Sept. 17-21, 2018)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 240.
UK : IOP Publishing.
Cognet, B., Pernot, J. P., Rivest, L., Danjou, C., Wuest, T., Karkkainen, H. et Lafleur, M..
2019.
« Towards a novel comparison framework of digital maturity assessment models ».
In Product Lifecycle Management in the Digital Twin Era : 16th IFIP WG 5.1 International Conference, PLM 2019, Moscow, Russia, July 8–12, 2019, Revised Selected Papers (Moscow, Russia, July 08-12, 2019)
Coll. « IFIP Advances in Information and Communication Technology », vol. 565.
pp. 58-71.
Springer.
Cognet, B., Pernot, J-P., Rivest, L., Danjou, C., Wuest, T., Kärkkäinen, H. et Lafleur, M..
2019.
« Towards a novel comparison framework of digital maturity assessment models ».
In IFIP 16th International Conference on Product Lifecycle Management (Moscow, Russia, July 08-12, 2019)
Demers, V.
2019.
« Low-pressure powder injection moulding review: enabling cost effective low and high volume PIM production ».
PIM International, vol. 13, nº 2.
pp. 53-63.
Despatis-Paquette, Benoit, Rivest, Louis et Pellerin, Robert.
2019.
« Connectivity validation for indoor IoT applications with weightless protocol ».
In 15th International Conference on Distributed Computing in Sensor Systems (DCOSS) - IoTI4 2019 : International Workshop on IoT Applications and Industry 4.0 (Santorini Island, Greece, May 29-31, 2019)
pp. 393-399.
Los Alamitos, CA, USA : IEEE Computer Society.
Dollon, Quentin, Tahan, Antoine, Antoni, Jérôme, Gagnon, Martin et Monette, Christine.
2019.
« Dynamic characterization of hydroelectric turbine with transient data records using OBMA and phase-shift analysis ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 343-355.
INSA.
Dupont-Marillia, Frederic, Jahazi, Mohammad et Belanger, Pierre.
2019.
« Live imaging using TFM in a 30-inch forged steel block ».
In ASNT Annual Conference 2019 (Las Vegas, NV, USA, Nov. 18-21, 2019)
ASNT.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Belanger, Pierre.
2019.
« Design and optimisation of a phased array transducer for ultrasonic inspection of large forged steel ingots ».
NDT and E International, vol. 103.
pp. 119-129.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Belanger, Pierre.
2019.
« Influence of local mechanical parameters on ultrasonic wave propagation in large forged steel ingots ».
Journal of Nondestructive Evaluation, vol. 38, nº 3.
Ebrahimi, G. R., Momeni, A., Ezatpour, H. R., Jahazi, M. et Bocher, P..
2019.
« Dynamic recrystallization in Mone1400 Ni-Cu alloy: mechanism and role of twinning ».
Materials Science and Engineering : A, vol. 744.
pp. 376-385.
El-Ghaoui, Khalid, Chatelain, Jean-François et Ouellet-Plamondon, Claudiane.
2019.
« Effect of graphene on machinability of glass fiber reinforced polymer (GFRP) ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 3.
Eres-Castellanos, Adriana, Hidalgo, Javier, Zorgani, Muftah, Jahazi, Mohammad, Toda-Caraballo, Isaac, Caballero, Francisca G. et Garcia, Mateo. 2019. « On the control of the scale of nanobainitic microstructures by prior austenite strengthening ». Communication lors de la conférence : European Congress and Exhibition on Advanced Materials and Processes (EUROMAT) (Stockholm, Sweden, Sept. 01-05, 2019).
Fall, A., Monajati, H., Khodabandeh, A., Fesharaki, M. H., Champliaud, H. et Jahazi, M..
2019.
« Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ».
Materials Science and Engineering: A, vol. 749.
pp. 166-175.
Fayed, Eslam, Medraj, Mamoun, Shahriari, Davood, Jahazi, Mohammad et Brailovski, Vladimir.
2019.
« Effect of heat treatment holding time on the microstructure and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting ».
In Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Western University - Department of Mechanical and Materials Engineering. Forgues, D., Rivest, L., Danjou, C. et Meyer, J.. 2019. « De l’industrie 4.0 à la construction 4.0 : des exemples concrets! ». Communication lors de la conférence : Aedifica (Montreal, QC, Canada, 14 avril 2019).
Gendron, Mathieu, Hazel, Bruce, Boudreault, Eric, Champliaud, Henri et Pham, Xuan-Tan.
2019.
« Coupled thermo-electromagnetic model of a new robotic high-frequency local induction heat treatment system for large steel components ».
Applied Thermal Engineering, vol. 150.
pp. 372-385.
Généreux, Louis-Alexandre, Lebrun, Gilbert, Viens, Martin et Chatelain, Jean-François.
2019.
« Evaluation of machining defects in a composite laminate by combining non-destructive and tensile testing ».
In
Materials Design and Applications II.
Coll. « Advanced Structured Materials », vol. 98.
pp. 341-362. Cham, Suisse : Springer Verlag.
Haj Ibrahim, Marwa, Aidibe, Ali, Mahjoub, Mohamed Ali, Tahan, Antoine et Louhichi, Borhen.
2019.
« A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology ».
International Journal of Advanced Manufacturing Technology, vol. 103, nº 1-4.
pp. 409-422.
Hussein, Mahmoud, Ghommam, Jawhar, Ghodbane, Azeddine, Saad, Maarouf et Nerguizian, Vahe.
2019.
« Distributed active fault tolerant control design against actuator faults for multiple mobile robots ».
Control Theory and Technology, vol. 17, nº 4.
pp. 367-381. Jahromi, A., Dubé, M., Serdyuk, Y., Rouhi, M. S. et Fagerström, M.. 2019. « Simulation of induction welding process for glass fiber thermoplastic composites in aerospace applications ». Communication lors de la conférence : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2019).
Javadi, Hamid, Jomaa, Walid, Songmene, Victor, Brochu, Myriam et Bocher, Philippe.
2019.
« Inconel 718 superalloy controlled surface integrity for fatigue applications produced by precision turning ».
International Journal of Precision Engineering and Manufacturing, vol. 20, nº 8.
pp. 1297-1310.
Jbira, Ibtissem, Ben Makhlouf, Aicha, Louhich, Borhen, Tahan, Antoine, Mahjoub, Mohamed Ali et Deneux, Dominique.
2019.
« A comparative study of extraction cylinder features in industrial point clouds ».
In 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019)
pp. 431-441.
Los Alamitos, CA, USA : IEEE Computer Society.
Jbira, Ibtissem, Tahan, Antoine, Bonsaint, Serge, Mahjoub, Mohamed Ali et Louhichi, Borhen.
2019.
« Reproducibility experimentation among computer-aided inspection software from a single point cloud ».
Journal of Control Science and Engineering, vol. 2019.
Kouamou, F. B., Songmene, V. et Kouam, J.. 2019. « Effect of tool paths on fine & ultrafine particles emission & distribution during polishing of medium silica content granite ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019).
Kouedeu, Annie Francie, Kenné, Jean-Pierre et Songmene, Victor.
2019.
« Optimal production planning of hybrid manufacturing/remanufacturing systems under deteriorations ».
In Proceedings of the 9th International Conference on Industrial Engineering and Operations Management (IEOM) (Bangkok, Thailand, March 05-07, 2019)
pp. 1382-1390.
IEOM Society.
Macloud, Alexandre, Zeighami, Ali, Aissaoui, Rachid et Rivest, Louis.
2019.
« Extracting grasping cues from one-handed tools geometry for digital human models ».
In International Conference on Human Systems Integration (HSI2019) (Biarritz, France, Sept. 11-13, 2019)
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2019.
« A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals ».
International Journal of Material Forming, vol. 12, nº 4.
pp. 693-702.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2019.
« Prediction of material behavior during biaxial stretching of superplastic 5083 aluminum alloy ».
The International Journal of Advanced Manufacturing Technology, vol. 102, nº 5-8.
pp. 2357-2366.
Masoumi, F., Shahriari, D., Monajati, H., Cormier, J., Flipo, B. C. D., Devaux, A. et Jahazi, M..
2019.
« Linear friction welding of AD730TM Ni-base superalloy: process-microstructure-property interactions ».
Materials and Design, vol. 183.
Montlahuc, Jérémy, Rivest, Louis, Pernot, Jean-Philippe, Tahan, Antoine et Polette, Arnaud. 2019. « Vers une utilisation conjointe de données multi-sources pour la génération et le traitement de nuages de points multicouches de parcelles et d’ouvrages existants : constats et premiers éléments d’analyse ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019).
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2019.
« A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions ».
Engineering Structures, vol. 197.
Niknam, Seyed Ali, Saberi, Masoud, Kouam, Jules, Hashemi, Ramin, Songmene, Victor et Balazinski, Marek.
2019.
« Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC) ».
Journal of Central South University, vol. 26, nº 6.
pp. 1563-1572.
Niknam, Seyed Ali, Tiabi, Azziz et Songmene, Victor.
2019.
« Burr edge occupancy: edge finishing index for milling machined parts ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 43, nº 2.
pp. 248-255. Olufayo, Oluwole A., Chaieb, Oussama, Songmene, Victor et Jahazi, Mohammad. 2019. « Machining studies on high silicon content Al-Si alloys for the aerospace industry ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019).
Olufayo, Oluwole A., Che, Hanqing, Songmene, Victor, Katsari, Christina et Yue, Stephen.
2019.
« Machinability of Rene 65 superalloy ».
Materials, vol. 12, nº 12.
Olufayo, Oluwole A., Elfasi, Osamaand et Songmene, Victor.
2019.
« Machinability studies of ferritic, austenitic and martensitic stainless steels ».
In Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Western University - Department of Mechanical and Materials Engineering.
Pham, Q. H., Gagnon, M., Tahan, A. et Monette, C..
2019.
« Interpolation of periodic hidden signal measured at steady-operating conditions on hydroelectric turbine runners ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 28-39.
INSA.
Proteau, Antoine, Tahan, Antoine et Thomas, Marc.
2019.
« Specific cutting energy: a physical measurement for representing tool wear ».
International Journal of Advanced Manufacturing Technology, vol. 103, nº 1-4.
pp. 101-110.
Proteau, Antoine, Thomas, Marc et Tahan, Antoine.
2019.
« Toward the quality prognostic of an aircraft engine workpiece in Inconel Alloy 625: case study and proposed system architecture ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 546-560.
INSA.
Rivest, Louis, Braesch, Christian, Nyffenegger, Felix, Danjou, Christophe, Maranzana, Nicolas et Segonds, Frédéric.
2019.
« Identifying PLM themes and clusters from a decade of research literature ».
International Journal of Product Lifecycle Management, vol. 12, nº 2.
pp. 81-106.
Rodrigues, Samuel F., Siciliano, Fulvio, Aranas Jr., Clodualdo, Silva, Eden S., Reis, Gedeon S., Jahazi, Mohammad et Jonas, John J..
2019.
« Dynamic phase transformation behavior of a Nb-microalloyed steel during roughing passes at temperatures above the Ae3 ».
Metals, vol. 9, nº 3.
Rohart, V., Dubé, M. et Laberge Lebel, L..
2019.
« Improvement of the lap shear strength of resistance-welded thermoplastic composite joints using a silane sol-gel coating on the stainless-steel heating element ».
In ICCM22 : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2020)
pp. 4706-4714.
Melbourne, VIC : Engineers Australia.
Rohart, V., Dubé, M. et Laberge Lebel, L..
2019.
« Lap shear strength effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ».
SAMPE Journal, vol. 55, nº 3.
pp. 30-37.
Saadati, Mohammad, Edalat Nobarzad, Amir Keyvan et Jahazi, Mohammad.
2019.
« On the hot cracking of HSLA steel welds: Role of epitaxial growth and HAZ grain size ».
Journal of Manufacturing Processes, vol. 41.
pp. 242-251.
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert et Beauchamp, Yves.
2019.
« Comparison of density measurement methods for unidirectional flax-epoxy polymer composites ».
In European Conference on Multifunctional Structures (EMuS) (Barcelona, Spain, June, 11-12)
pp. 75-80.
International Centre for Numerical Methods in Engineering (CIMNE).
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert et Beauchamp, Yves.
2019.
« Tension and compression properties of unidirectional flax fibre-reinforced epoxy composites for modeling of machining processes ».
In 27th Canadian Congress of Applied Mechanics (CANCAM) (Sherbrooke, QC, Canada, May 27-30, 2019)
Saidi, M. N., Songmene, V., Kouam, J. et Bahloul, A..
2019.
« Study of surface quality and dust particles emission and dispersion during dry polishing of granite ».
International Journal of Advanced Manufacturing Technology, vol. 104.
pp. 4675-4684.
Shafiee, Ahad, Moon, Jongun, Kim, Hyoung Seop, Jahazi, Mohammad et Nili-Ahmadabadi, Mahmoud.
2019.
« Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy ».
Materials Science and Engineering A, vol. 749.
pp. 271-280.
Shnfir, Mohamed, Olufayo, Oluwole A., Jomaa, Walid et Songmene, Victor.
2019.
« Machinability study of hardened 1045 steel when milling with ceramic cutting inserts ».
Materials, vol. 12, nº 23.
Slamani, Mohamed et Chatelain, Jean-François.
2019.
« Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs) ».
Journal of Manufacturing Processes, vol. 37.
pp. 177-195.
Slamani, Mohamed, Chatelain, Jean-Francois et Hamedanianpour, Hossein.
2019.
« Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers ».
International Journal of Material Forming, vol. 12, nº 3.
pp. 331-353. Songmene, Victor. 2019. « Comité R&D aluminium : Enjeux pour l'usinage ». Communication lors de la conférence : Séminaire, CMQ, Organisé par Alu-Québec en collaboration avec CeAL (Trois-Rivières, QC, Canada, 31 janv. 2019). Songmene, Victor. 2019. « Progress on fine and ultrafine particles emission, dispersion & control during machining : cases of metals, composite, woods and granite ». Communication lors de la conférence : 5th Edition of International Conference on Occupational Health and Public Safety (Berlin, Germany, Apr. 23-24, 2019). Songmene, Victor. 2019. « Usinage 4.0 : optimisation des performances d'usinage ». Communication lors de la conférence : Séminaire Usinage 4.0, CTA Saint-Hubert, organisé par Réseau-TransA1 en collaboration avec Alu-Québec, CeAl et CRITM (Saint-Hubert, QC, Canada, 01 oct. 2019).
Sun, Yulan et Thomas, Marc.
2019.
« Semi-active torsional vibrations control of a rotor using a smart ER dynamic absorber ».
In SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019)
pp. 636-647.
INSA.
Tabaie, Seyedmohammad, Shahriari, Davood, Plouze, Cléa, Devaux, Alexandre, Cormier, Jonathan et Jahazi, Mohammad.
2019.
« Hot ductility behavior of AD730™ nickel-base superalloy ».
Materials Science and Engineering A, vol. 766.
Thieulin, Valentin, Rivest, Louis et Tahan, Antoine. 2019. « Investigation des performances in situ de la numérisation d’une tuyauterie industrielle par photogrammétrie et lumière structurée ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019).
Touazine, Heithem, Chadha, Kanwal, Jahazi, Mohammad et Bocher, Philippe.
2019.
« Characterization of subsurface microstructural alterations induced by hard turning of Inconel 718 ».
Journal of Materials Engineering and Performance, vol. 28, nº 11.
pp. 7016-7024.
Vu, Ngoc-Hung, Pham, Xuan-Tan, Francois, Vincent et Cuillière, Jean-Christophe.
2019.
« Characterization of multilayered carbon-fiber-reinforced thermoplastic composites for assembly process ».
Journal of Thermoplastic Composite Materials, vol. 32, nº 5.
pp. 673-689.
Vu, Ngoc-Hung, Pham, Xuan-Tan, François, Vincent et Cuillière, Jean-Christophe.
2019.
« Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process ».
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 233, nº 17.
pp. 6167-6176.
Xing, Kanglin, Rimpault, Xavier, Mayer, J. R. R., Chatelain, Jean-François et Achiche, Sofiane.
2019.
« Five-axis machine tool fault monitoring using volumetric errors fractal analysis ».
CIRP Annals, vol. 68, nº 1.
pp. 555-558.
Xing, Kanglin, Rimpault, Xavier, Mayer, J. R. R., Chatelain, Jean-François et Achiche, Sofiane.
2019.
« Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures ».
In 7th CIRP Global Web Conference (CIRPe) (En ligne, Oct. 16-19, 2019)
Coll. « Procedia CIRP », vol. 86.
pp. 145-150.
Berlin, Germany : Elsevier B.V..
Zhang, Chunping, Loucif, Abdelhalim, Tremblay, Rami et Jahazi, Mohammad.
2019.
« Influence of non-uniform temperature distribution of the mold on solidification behavior in large-size steel ingots ».
In Proceedings of the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2019) (Toronto, ON, Canada, Aug. 13-15, 2019)
pp. 573-581.
Association for Iron & Steel Technology.
Zongo, Floriane, Tahan, Antoine et Brailovski, Vladimir.
2019.
« Scale, material concentration, stress relief and part removal effects on the dimensional behaviour of selected AlSi10Mg components manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 2.
2018
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2018.
« Tool condition monitoring using spectral subtraction algorithm and artificial intelligence methods in milling process ».
International Journal of Mechanical Engineering and Robotics Research, vol. 7, nº 1.
pp. 30-34.
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2018.
« Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 9-12.
pp. 3217-3227.
Aidibe, A., Tahan, A. et Brailovski, V..
2018.
« A novel industrial test artifact for the evaluation of dimensional capabilities of metallic additive manufacturing systems ».
In Proceedings of the European Powder Metallurgy Association (EPMA) : Euro PM2018 (Bilbao, Spain, Oct. 14-18, 2018)
European Powder Metallurgy Association (EPMA).
Aranas, Clodualdo Jr., Rodrigues, Samuel, Fall, Ameth, Jahazi, Mohammad et Jonas, John.
2018.
« Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ».
Metals, vol. 8, nº 5.
Arhumah, Z., Alkhabbat, M. et Pham, X-T.. 2018. « Heat effect on mechanical properties and microstructure of aluminum welding ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).
Arkhazloo, Nima Bohlooli, Bazdidi-Tehrani, Farzad, Jean-Benoit, Morin et Jahazi, Mohammad.
2018.
« A numerical thermal analysis of the heating process of large size forged ingots ».
In THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 2278-2283.
Trans Tech Publications.
Ben Fredj, Emna, Ghasemi Nanesa, Hadi, Jahazi, Mohammad et Morin, Jean-Benoit.
2018.
« Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ».
Journal of Iron and Steel Research International, vol. 25, nº 5.
pp. 554-562.
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2018.
« A comparison between aggregation before and after propagation based on a reliability model ».
Information Sciences, vol. 453.
pp. 99-110.
Bertrand, Samuel, Shahriari, Davood, Jahazi, Mohammad et Champliaud, Henri.
2018.
« Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ».
In 17th International Conference on Metal Forming (Metal Forming) (Toyohashi, Japan, Sept. 16-19, 2018)
Coll. « Procedia Manufacturing », vol. 15.
pp. 1382-1390.
Netherlands : Elsevier B.V..
Bitterlin, Matthieu, Shahriari, Davood, Lapierre-Boire, Louis-Philippe, Morin, Jean-Benoît et Jahazi, Mohammad.
2018.
« Hot deformation behavior of a nickel-modified AISI 4330 steel ».
ISIJ International, vol. 58, nº 9.
pp. 1711-1720.
Blancke, Olivier, Combette, Amélie, Amyot, Normand, Komljenovic, Dragan, Lévesque, Mélanie, Hudon, Claude, Tahan, Antoine et Zerhouni, Noureddine.
2018.
« A predictive maintenance approach for complex equipment based on petri net failure mechanism propagation model ».
Proceedings of the European Conference of the PHM Society, vol. 4, nº 1.
Blancke, Olivier, Tahan, Antoine, Komljenovic, Dragan, Amyot, Normand, Lévesque, Mélanie et Hudon, Claude.
2018.
« A holistic multi-failure mode prognosis approach for complex equipment ».
Reliability Engineering and System Safety, vol. 180.
pp. 136-151.
Bouzid, A., Songmene, V. et Kenné, J. P..
2018.
« Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ».
In 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018)
pp. 294-300.
Comite Africain de Metrologie.
Brassard, D., Dubé, M. et Tavarez, J..
2018.
« Conductive nanocomposites as heating elements for resistance welding ».
In 6th International Carbon Composites Conference (IC3) (Arcachon, France, June 04-06, 2018)
Brionne, Gary, Loucif, Abdelhalim, Zhang, Chunping, Lapierre-Boire, Louis-Philippe et Jahazi, Mohammad.
2018.
« 3D FEM simulation of the effect of cooling rate on SDAS and macrosegregation of a high strength steel ».
In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 2360-2364.
Trans Tech Publications Ltd.
Caggiano, Alessandra, Rimpault, Xavier, Teti, Roberto, Balazinski, Marek, Chatelain, Jean-Francois et Nele, Luigi.
2018.
« Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly ».
CIRP Annals, vol. 67, nº 1.
pp. 483-486.
Cambron, P., Masson, C., Tahan, A. et Pelletier, F..
2018.
« Control chart monitoring of wind turbine generators using the statistical inertia of a wind farm average ».
Renewable Energy, vol. 116, nº B.
pp. 88-98.
Chadha, K., Ahmed, Z., Aranas, C., Shahriari, D. et Jahazi, M..
2018.
« Influence of strain rate on dynamic transformation of austenite in an as-cast medium-carbon low-alloy steel ».
Materialia, vol. 1.
pp. 155-167.
Chen, Jianqiang, Demers, Vincent, Turner, Daniel P. et Bocher, Philippe.
2018.
« Experimental investigation on high-cycle fatigue of inconel 625 superalloy brazed joints ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 49A, nº 4.
pp. 1244-1253.
Côté, N., Dubé, M., Dano, M-L et Potvin, M-J.
2018.
« Repair of thermoplastic composite structures using induction welding ».
In CASI-ASTRO Conference (Québec, QC, Canada, May 15-17, 2018)
Canadian Aeronautics and Space Institute.
Demers, V., Fareh, F., Turenne, S., Demarquette, N. R. et Scalzo, O..
2018.
« Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding ».
Advanced Powder Technology, vol. 29, nº 1.
pp. 180-190.
Dermanaki Farahani, Rouhollah et Dubé, Martine.
2018.
« Printing polymer nanocomposites and composites in three dimensions ».
Advanced Engineering Materials, vol. 20, nº 2.
Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2018.
« Performance of a capillary dilution system for high concentration sampling of ultrafine aerosols ».
Aerosol Science and Engineering, vol. 2, nº 2.
92–97.
Dupont-Marillia, Frederic, Jahazi, Mohammad et Bélanger, Pierre.
2018.
« Phased array inspection of large size forged steel parts ».
In 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017)
Coll. « AIP Conference Proceedings », vol. 1949.
American Institute of Physics.
Farahani, R. D., Therriault, D., Dubé, M., Bodkhe, S. et Mahdavi, M..
2018.
« Additive manufacturing of multifunctional nanocomposites and composites ».
In
Comprehensive Composite Materials II.
2nd ed.
pp. 380-407. Elsevier.
Filion, Alexandre, Joubair, Ahmed, Tahan, Antoine S. et Bonev, Ilian A..
2018.
« Robot calibration using a portable photogrammetry system ».
Robotics and Computer-Integrated Manufacturing, vol. 49.
pp. 1339-1351.
Gharagozloo, M., Pham, X-T. et Nguyen, C-C.
2018.
« Feasibility study of aluminium deposition by robotic MIG welding process ».
In CanWeld Conference 2018 (Winnipeg, MB, Canada, Sept. 12-13, 2018)
Gholami, Ehsan et Demers, Vincent.
2018.
« Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ».
International Journal of Mechanical and Production Engineering, vol. 6, nº 10.
pp. 33-38.
Guérineau, Benjamin, Rivest, Louis, Bricogne, Matthieu, Durupt, Alexandre et Eynard, Benoît.
2018.
« Towards a design-method selection framework for multidisciplinary product development ».
In 15th International Design Conference (DESIGN 2018) (Dubrovnik, Croatia, May 21-24, 2018)
Coll. « Proceedings of International Design Conference, DESIGN »
pp. 2879-2890.
Faculty of Mechanical Engineering and Naval Architecture.
Guo, Baoqi, Aranas, Clodualdo, Foul, Anes, Ji, Xiankun, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2018.
« Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ».
Materials Science and Engineering A, vol. 729.
pp. 119-124.
Guo, Baoqi, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2018.
« Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 49, nº 12.
pp. 5956-5961.
Habibzadeh Boukani, Hamid, Viens, Martin, Tahan, Souheil-Antoine et Gagnon, Martin.
2018.
« Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 5-8.
pp. 2201-2211.
Il, Alexandre, Chatelain, Jean-François, Lalonde, Jean-François, Balazinski, Marek et Rimpault, Xavier.
2018.
« An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling ».
International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4.
pp. 413-426.
Karabibene, N., Chatelain, J-F., Beauchamp, Y. et Lebrun, G..
2018.
« Effect of machining parameters on the quality of a flax fiber reinforced polymer composite ».
In International Conference on Industry, Engineering, and Management Systems (IEMS 2018) (Cocoa Beach, FL, USA, Mar. 19-21, 2018)
Karabibene, N., Chatelain, J-F., Beauchamp, Y. et Lebrun, G..
2018.
« Effect of machining parameters on the uncut fibers of a unidirectional flax fiber reinforced composite ».
Journal of Management and Engineering Integration, vol. 11, nº 1.
Kibouka, Guy Richard, Nganga-Kouya, Donatien, Kenné, Jean-Pierre, Polotski, Vladimir et Songmene, Victor.
2018.
« Maintenance and setup planning in manufacturing systems under uncertainties ».
Journal of Quality in Maintenance Engineering, vol. 24, nº 2.
pp. 170-184.
Kuate-Togue, H., Chatelain, J-F. et Ouellet-Plamondon, C..
2018.
« Effect of additives on cutting temperature of glass fibers reinforced polymers ».
In Proceedings of The Canadian Society for Mechanical Engineering International Congress (CSME) (Toronto, ON, Canada, May 27-30, 2018)
CSME.
Loucif, Abdelhalim, Ben Fredj, Emna, Harris, Nathan, Shahriari, Davood, Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe.
2018.
« Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ».
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 49, nº 3.
pp. 1046-1055.
Loucif, Abdelhalim, Bitterlin, Matthieu, Jahazi, Mohammad, Tremblay, Rami, Morin, Jean-Benoît et Lapierre-Boire, Louis-Philippe.
2018.
« Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ».
Metallography, Microstructure, and Analysis, vol. 7, nº 2.
pp. 203-208.
Loucif, Abdelhalim, Shahriari, Davood, Chadha, Kanwal, Zhang, Chunping, Jahazi, Mohammad, Tremblay, Rami et Lapierre-Boire, Louis-Philippe.
2018.
« Cracking and failure in a high strength low alloy steel during solidification ».
In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 15-20.
Trans Tech Publications Ltd.
Loucif, Abdelhalim, Touazine, Heithem et Jahazi, Mohammad.
2018.
« Prediction of steel transformation temperatures using thermodynamic modeling and design of experiments (DOE) ».
In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 2284-2289.
Trans Tech Publications Ltd.
Lyassami, Mountadar, Shahriari, Davood, Ben Fredj, Emna, Morin, Jean-Benoit et Jahazi, Mohammad.
2018.
« Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2018.
« Finite element simulation of high-speed blow forming of an automotive component ».
Metals, vol. 8, nº 11.
Marani, Mohsen, Songmene, Victor, Kouam, Jules et Zedan, Yasser.
2018.
« Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg 2Si-2Cu metal matrix composite with modifier elements ».
International Journal of Advanced Manufacturing Technology, vol. 99, nº 1-4.
pp. 789-802.
Marani, Mohsen, Songmene, Victor, Kouam, Jules et Zedan, Yasser.
2018.
« Valuation of the effect of barium on surface roughness and ultrafine particle emission while dry milling Al-20Mg2Si metal matrix composite ».
In 2018 6th International Conference on Mechanical, Automotive and Materials Engineering (CMAME) (Hong Kong, China, Aug. 10-12, 2018)
Piscataway, NJ, USA : IEEE. Marani-Barzani, Mohsen et Songmene, Victor. 2018. « Machinability and mechanical properties of Al-Mg2Si in-situ composite with bismuth or barium ». Affiche présentée lors de la conférence : REGAL student's day). Maranzana, Roland, Msaaf, Omar et Rivest, Louis (inventeurs) 17 avril 2018. « Method and system for comparing 3D models ». SOCOVAR (titulaire(s)). Brevet américain US 9,946,732 B2.
Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2018.
« Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ».
Journal of Manufacturing Processes, vol. 34, part A.
pp. 86-95.
Masoumi, F., Thebaud, L., Shahriari, D., Jahazi, M., Cormier, J., Devaux, A. et Flipo, B. C. D..
2018.
« High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ».
Materials Science and Engineering A, vol. 710.
pp. 214-226.
Mostafa, Ahmad, Shahriari, Davood, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2018.
« Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ».
International Journal of Advanced Manufacturing Technology, vol. 96, nº 1-4.
pp. 371-385.
Nassar, M., Guizani, L., Nollet, M. -J. et Tahan, A..
2018.
« Approche probabiliste pour évaluer la fiabilité des ponts isolés à la base, sous l’effet simultané des séismes et de la température en régions froides ».
In 25e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art (Montréal, QC, Canada, 8-9 mai 2018)
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2018.
« A probabilistic approach to assess seismic base-isolated bridges reliability in cold climate ».
In 11th National Conference on Earthquake Engineering 2018: Integrating Science, Engineering, and Policy (NCEE) (Los Angeles, CA, USA, June 25-29, 2018)
pp. 2773-2777.
Earthquake Engineering Research Institute. Nguyen, H.-C., Pham, X-T. et Jahazi, M.. 2018. « Implementing phase-field ductile fracture model for aluminum welded joint ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).
Niknam, Seyed Ali, Davoodi, Behnam, Davim, J. Paulo et Songmene, Victor.
2018.
« Mechanical deburring and edge-finishing processes for aluminum partsa review ».
International Journal of Advanced Manufacturing Technology, vol. 95, nº 1-4.
pp. 1101-1125.
Pantoja, Francisco G., Songmene, Victor, Kenné, Jean-Pierre, Olufayo, Oluwole A. et Ayomoh, Michael.
2018.
« Development of a tool cost optimization model for stochastic demand of machined products ».
Applied Mathematics, vol. 9, nº 12.
pp. 1395-1423.
Rimpault, X., Chatelain, J-F. et Balazinski, M..
2018.
« Fractal analysis applications for improving monitoring and prediction systems in machining ».
In 7th International Conference on Virtual Machining Process Technology (VMPT 2018) (Hamilton, ON, Canada, May 07-09, 2018)
Rimpault, Xavier, Balazinski, Marek et Chatelain, Jean-François.
2018.
« Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0 ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
Rivest, L., Danjou, C. et Pellerin, R.. 2018. « Positionnements stratégiques dans le contexte de l'industrie 4.0 ». Communication lors de la conférence : Table ronde 4.0 CEFRIO Prompt : De la pme 2.0 à l’entreprise 4.0 : la révolution des données (Montreal, QC, Canada, 31 mai 2018). Rivest, Louis, Danjou, Christophe, Lange, Lola et Pellerin, Robert. 2018. « Positionnements stratégiques du vêtement connecté dans le contexte de l’Industrie 4.0 ». Communication lors de la conférence : Wear It Smart (Montreal, QC, Canada, May 10, 2018).
Rohart, Vincent, Dubé, Martine et Laberge Lebel, Louis.
2018.
« Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ».
In SAMPE Long Beach 2018 Conference and Exhibition; (Long Beach, CA, USA, May 21-24, 2018)
SAMPE.
Rouhollah Dermanaki, Farahani, Janier, Mathieu et Dubé, Martine.
2018.
« Conductive films of silver nanoparticles as novel susceptors for induction welding of thermoplastic composites ».
Nanotechnology, vol. 29, nº 12.
Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor.
2018.
« A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions ».
International Journal of Advanced Manufacturing Technology, vol. 96, nº 9-12.
pp. 3747-3791.
Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor.
2018.
« Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel ».
International Journal of Advanced Manufacturing Technology, vol. 94, nº 5-8.
pp. 2457-2474.
Saidi, M. N., Songmene, V., Kouam, J. et Bahloul, A..
2018.
« Rotational and translation-free polishing of granite: surface quality and dust particles emission and dispersion ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 1-4.
pp. 289-303.
Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, François, Vincent et Tahan, Souheil-Antoine.
2018.
« “What-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads ».
International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4.
pp. 353-373.
Seede, Raiyan, Mostafa, Ahmad, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2018.
« Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Songmene, V., Kouam, J. et Balhoul, A..
2018.
« Effect of minimum quantity lubrication (MQL) on fine and ultrafine particle emission and distribution during polishing of granite ».
Measurement: Journal of the International Measurement Confederation, vol. 114.
pp. 398-408.
Songmene, V., Miazza, A., Kouam, J. et Olufayo, O.A..
2018.
« Machining granite materials: effects of polishing conditions on part quality, fine and ultrafine particles emission ».
In 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018)
pp. 37-46.
Comite Africain de Metrologie. Songmene, Victor. 2018. « Effect of machining & lubricating conditions on dust emission during granite polishing ». Communication lors de la conférence : 4th International Conference on Occupational Health and Safety, EuroSciCon (London, UK, May 28-29, 2018).
Sun, Binhan, Fazeli, Fateh, Scott, Colin, Guo, Baoqi, Aranas, Clodualdo, Chu, Xin, Jahazi, Mohammad et Yue, Stephen.
2018.
« Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ».
Materials Science and Engineering A, vol. 729.
pp. 496-507.
Talebi, Seyyed Hesamodin, Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Melkonyan, Haikouhi.
2018.
« Influence of starting microstructure on dilatation behavior during tempering of a high strength steel ».
In THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 305-310.
Trans Tech Publications.
Talebi, Seyyed Hesamondin, Jahazi, Mohammad et Melkonyan, Haikouhi.
2018.
« Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ».
Materials, vol. 11, nº 8.
Texier, D., Atmani, F., Bocher, P., Nadeau, F., Chen, J., Zedan, Y., Vanderesse, N. et Demers, V..
2018.
« Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation ».
International Journal of Fatigue, vol. 116.
pp. 220-233. Tran, T.-N., Nguyen, C.-C. et Pham, X.-T.. 2018. « Multi-physics modeling of aluminium laser welding process ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).
Zhang, C., Shahriari, D., Loucif, A., Melkonyan, H. et Jahazi, M..
2018.
« Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ».
International Journal of Advanced Manufacturing Technology, vol. 99, nº 9-12.
pp. 3035-3048.
Zhang, Chunping, Loucif, Abdelhalim, Jahazi, Mohammad, Tremblay, Rami et Lapierre, Louis-Philippe.
2018.
« On the effect of filling rate on positive macrosegregation patterns in large size cast steel ingots ».
Applied Sciences, vol. 8, nº 10.
Zongo, Floriane, Tahan, Antoine, Aidibe, Ali et Brailovski, Vladimir.
2018.
« Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
2017
Aidibe, Ali, Nejad, Mojtaba Kamali, Tahan, Antoine, Jahazi, Mohammad et Cloutier, Sylvain G..
2017.
« Surface characterization of die inserts used for LED lamp plastic lenses ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 3395-3403.
Aranas, Clodualdo, Foul, Anes, Guo, Baoqi, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2017.
« Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ».
Scripta Materialia, vol. 133.
pp. 83-85.
Arfaoui, M. A., Dolez, P. I., Dubé, M. et David, É..
2017.
« Development and characterization of a hydrophobic treatment for jute fibres based on zinc oxide nanoparticles and a fatty acid ».
Applied Surface Science, vol. 397.
pp. 19-29.
Barzani, Mohsen Marani, Farahany, Saeed et Songmene, Victor.
2017.
« Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth ».
Measurement, vol. 110.
pp. 263-274.
Bonakdar, Ali, Molavi-Zarandi, Marjan, Chamanfar, Ahmad, Jahazi, Mohammad, Firoozrai, Arash et Morin, Eric.
2017.
« Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ».
Journal of Manufacturing Processes, vol. 26.
pp. 339-354. Bouissa, Yassine, Champliaud, Henri, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe, Morin, Jean-Benoît et Poulain, Nicolas. 2017. « Modeling heterogeneities effects on phase transformation during quenching of large size forged steel ingots ». Communication lors de la conférence : 14th U.S. National Congress on Computational Mechanics (USNCCM) (Montreal, QC, Canada, July 17-20, 2017).
Cambron, Philippe, Masson, Christian, Tahan, Antoine, Torres, David et Pelletier, Francis.
2017.
« Comparison of power curve monitoring methods ».
In International Conference on Advances in Energy Systems and Environmental Engineering (ASEE 2017) (Wroclaw, Poland, July 02-05, 2017)
Coll. « E3S Web of Conferences », vol. 22.
EDP Sciences.
Cambron, Philippe, Tahan, Antoine, Masson, Christian et Pelletier, Francis.
2017.
« Bearing temperature monitoring of a Wind Turbine using physics-based model ».
Journal of Quality in Maintenance Engineering, vol. 23, nº 4.
pp. 479-488.
Chadha, K., Shahriari, D., Tremblay, R., Bhattacharjee, P. P. et Jahazi, M..
2017.
« Deformation and recrystallization behavior of the cast structure in large size, high strength steel ingots: Experimentation and modeling ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48, nº 9.
pp. 4297-4313.
Chadha, Kanwal, Shahriari, Davood et Jahazi, Mohammad.
2017.
« An approach to develop hansel-spittel constitutive equation during ingot breakdown operation of low alloy steels ».
In Frontiers in Materials Processing, Applications, Research and Technology : Select Proceedings of FiMPART 2015 (Hyderabad, India, June 12-15, 2015)
pp. 239-246.
Springer.
Chamanfar, Ahmad, Monajati, Hossein, Rosenbaum, Alex, Jahazi, Mohammad, Bonakdar, Ali et Morin, Eric.
2017.
« Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ».
Materials Characterization, vol. 132.
pp. 53-68.
Chen, Jianqiang, Demers, Vincent, Cadotte, Eve-Line, Turner, Daniel et Bocher, Philippe.
2017.
« Structural performance of inconel 625 superalloy brazed joints ».
Journal of Materials Engineering and Performance, vol. 26, nº 2.
pp. 547-553.
Chentouf, S. M., Belhadj, T., Bombardier, N., Brodusch, N., Gauvin, R. et Jahazi, M..
2017.
« Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 2929-2937.
Danjou, Christophe, Pellerin, Robert et Rivest, Louis.
2017.
« Le passage au numérique : Industrie 4.0 : des pistes pour aborder l'ère du numérique et de la connectivité ».
Québec : Centre francophone d’informatisation des organisations (CEFRIO). 26 p.
Danjou, Christophe, Rivest, Louis et Pellerin, Robert.
2017.
« Douze positionnements stratégiques pour l’Industrie 4.0 : entre processus, produit et service, de la surveillance à l’autonomie ».
In CIGI 2017 : 12ème Congrès International de Génie Industriel (Compiègne, France, 3-5 mai 2017)
Daoud, M., Chatelain, J. F. et Bouzid, A..
2017.
« Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ».
International Journal of Mechanical Sciences, vol. 122.
pp. 392-404.
Delahaigue, J., Chatelain, J. F. et Lebrun, G..
2017.
« Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates ».
[Article de conférence]. Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials: Design and Applications, vol. 231, nº 1-2.
pp. 196-209.
Delahaigue, Jérémy, Chatelain, Jean-Francois et Lebrun, Gilbert.
2017.
« Influence of cutting temperature on the tensile strength of a carbon fiber-reinforced polymer ».
Fibers, vol. 5, nº 4.
Deluy, Marc-Claudel, Ngo, Anh Dung, Dubé, Martine et Ganesan, Rajamohan.
2017.
« Influences of frequency and temperature on the fatigue behavior of plain-weave carbon/epoxy composite material with flaw subjected to partially-reversed cyclic loading ».
In 21st International Conference on Composite Materials (Xi'an, China, Aug. 20-25, 2017)
International Committee on Composite Materials.
Demers, V., Elmajdoubi, M. M. et Bocher, P..
2017.
« Moldability of low-pressure powder injection molding feedstocks ».
In Advances in Powder Metallurgy & Particulate Materials 2017 : Conference Proceedings (Las Vegas , NV, USA, June 13-16, 2017)
pp. 401-414.
Metal Powder Industries Federation.
Dolez, Patricia I., Arfaoui, Mohamed A., Dubé, Martine et David, Éric.
2017.
« Hydrophobic treatments for natural fibers based on metal oxide nanoparticles and fatty acids ».
In 3rd International Conference on Natural Fibers: Advanced Materials for a Greener World (ICNF) (Braga, Portugal, June 21-23, 2017)
Coll. « Procedia Engineering », vol. 200.
pp. 81-88.
Netherlands : Elsevier B.V..
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Bélanger, Pierre.
2017.
« Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ».
In 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016)
Coll. « AIP Conference Proceedings », vol. 1806.
USA : American Institute of Physics.
Elgnemi, Tarek, Ahmadi, Keivan, Songmene, Victor, Nam, Jungsoo et Jun, Martin B. G..
2017.
« Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite ».
Journal of Manufacturing Processes, vol. 30.
pp. 133-140.
Fall, A., Jahazi, M., Khodabandeh, A. R. et Fesharakib, M. H..
2017.
« Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8.
pp. 2919-2931.
Farahani, R. D., Seiller, R. et Dubé, M..
2017.
« Nanocomposite heating elements for induction welding of thermoplastic composites ».
In 10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century CANCOM2017 (Ottawa, ON, Canada, July 17-20, 2017)
Farahani, Rouhollah Dermanaki et Dubé, Martine.
2017.
« Novel heating elements for induction welding of carbon fiber/polyphenylene sulfide thermoplastic composites ».
Advanced Engineering Materials, vol. 19, nº 11.
Fareh, F., Demers, V., Demarquette, N. R., Turenne, S. et Scalzo, O..
2017.
« Influence of segregation on rheological properties of wax-based feedstocks ».
Powder Technology, vol. 320.
pp. 273-284.
Fredj, Emna Ben, Nanesa, Hadi Ghasemi, Shahriari, Davood, Morin, Jean-Benoit et Jahazi, Mohammad.
2017.
« Effect of cooling rate on phase transformation and microstructure evolution in a large size forged ingot of medium carbon low alloy steel ».
In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-March 2, 2017)
Coll. « The Minerals, Metals & Materials Series »
pp. 413-423.
Springer International Publishing.
Ghafarizadeh, Seyedbehzad, Tahvilian, Amir Masoud, Chatelain, Jean-François, Liu, Zhaoheng, Champliaud, Henri et Lebrun, Gilbert.
2017.
« Numerical simulation of ball-end milling with SPH method ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 1.
pp. 401-408.
Ghasemi-Nanesa, Hadi, Jahazi, Mohammad, Heidari, Majid et Levasseur, Tom.
2017.
« The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel ».
In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017)
Coll. « AIP Conference Proceedings », vol. 1896.
USA : American Institute of Physics.
Guerineau, Benjamin, Zheng, Chen, Bricogne, Matthieu, Durupt, Alexandre, Rivest, Louis, Rowson, Harvey et Eynard, Benoît.
2017.
« Management of heterogeneous information for integrated design of multidisciplinary systems ».
In 27th CIRP Design 2017 (Cranfield, UK, May 10-12, 2017)
Coll. « Procedia CIRP », vol. 60.
pp. 320-325.
Elsevier.
Harris, Nathan, Shahriari, Davood et Jahazi, Mohammad.
2017.
« Development of a fast converging material specific void closure model during ingot forging ».
Journal of Manufacturing Processes, vol. 26.
pp. 131-141.
Hesamodin Talebi, S., Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Melkonyan, Haikouhi.
2017.
« In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ».
Metals, vol. 7, nº 9.
Jbira, I., Tlija, M., Louhichi, B. et Tahan, A..
2017.
« CAD/Tolerancing integration: Mechanical assembly with form defects ».
Advances in Engineering Software, vol. 114.
pp. 312-324.
Jomaa, Walid, Mechri, Oussama, Levesque, Julie, Songmene, Victor, Bocher, Philippe et Gakwaya, Augustin.
2017.
« Finite element simulation and analysis of serrated chip formation during highspeed machining of AA7075T651 alloy ».
Journal of Manufacturing Processes, vol. 26.
pp. 446-458.
Jomaa, Walid, Songmene, Victor et Bocher, Philippe.
2017.
« Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals ».
Machining Science and Technology, vol. 21, nº 3.
pp. 335-361.
Jomaa, Walid, Songmene, Victor, Bocher, Philippe et Gakwaya, Augustin.
2017.
« Fea-based comparative investigation on high speed machining of aluminum alloys aa6061-t6 and aa7075-t651 ».
In 9th International Congress on Precision Machining, (ICPM 2017) (Athens, Greece, Sept. 06-09, 2017)
Coll. « Solid State Phenomena », vol. 261.
pp. 347-353.
Jonas, John J., Aranas, Clodualdo, Fall, Ameth et Jahazi, Mohammad.
2017.
« Transformation softening in three titanium alloys ».
Materials & Design, vol. 113.
pp. 305-310.
Karabibene, K., Chatelain, J.-F., Beauchamp, Y. et Lebrun, G..
2017.
« Optimization of machining parameters for the trimming process of unidirectional flax fiber composites ».
In 10th Canadian-International Conference on Composites (Ottawa, ON, Canada, July 17-20, 2017)
Karganroudi, Sasan Sattarpanah, Cuillière, Jean-Christophe, François, Vincent et Tahan, Antoine Souheil.
2017.
« Assessment of the robustness of a fixtureless inspection method for non-rigid parts based on a verification and validation approach ».
Journal of Verification, Validation and Uncertainty Quantification, vol. 2, nº 4.
Khettabi, Riad, Nouioua, Mourad, Djebara, Abdelhakim et Songmene, Victor.
2017.
« Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 5/8.
pp. 2593-2598.
Lamarre, Simon G., Demers, Vincent et Chatelain, Jean-François.
2017.
« Low-pressure powder injection molding using an innovative injection press concept ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8.
pp. 2595-2605.
Loucif, A., Bitterlin, M., Jahazi, M., Tremblay, R., Morin, J. B. et Lapierre-Boire, L. P..
2017.
« Crack analysis in as cast large size ingot of a high strength steel ».
In 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017)
pp. 766-767.
International Conference on Fracture.
Loucif, A., Shahriari, D., Chadha, K., Jahazi, M., Tremblay, R. et Lapierre-Boire, L. P..
2017.
« Analysis of cracks and failure during solidification of a high strength low alloy steel ».
In 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017)
pp. 770-771.
International Conference on Fracture.
Loucif, Abdelhalim, Shahriari, Davood, Zhang, Chunping P., Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Tremblay, Rami.
2017.
« Macrosegregation of alloying elements in hot top of large size high strength steel ingot ».
In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 1176-1181.
Trans Tech Publications.
Majidi, Omid, Jahazi, Mohammad, Bombardier, Nicolas et Samuel, Ehab.
2017.
« Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods ».
In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017)
Coll. « AIP Conference Proceedings », vol. 1896.
USA : American Institute of Physics.
Marani, Mohsen, Songmene, Victor et Maher, Ibrahem.
2017.
« Investigation on surface finish and tool condition while turning AL20 Mg2Si metal matrix composite ».
In Proceedings of The IRES International Conference (Teheran, Iran, June 12-13, 2017)
The Institute of Research Engineers and Scientists International Conference.
Marani, Mohsen, Songmene, Victor et Maher, Ibrahem.
2017.
« Investigation on surface finish and tool condition while turning AL20Mg2Si metal matrix composite ».
International Journal of Advances in Science, Engineering and Technology, vol. 5, nº 3, Supp. 1.
pp. 11-14.
Masoumi, F., Shahriari, D., Jahazi, M., Cormier, J. et Flipo, B. C. D..
2017.
« On the occurrence of liquation during linear friction welding of Ni-based superalloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48A, nº 6.
pp. 2886-2899.
Mirakhorli, F., Cao, X., Pham, X. T., Wanjara, P. et Fihey, J. L..
2017.
« Phase structures and morphologies of tempered CA6NM stainless steel welded by hybrid laser-arc process ».
Materials Characterization, vol. 123.
pp. 264-274.
Mirakhorli, F., Cao, X., Pham, X. T., Wanjara, P. et Fihey, J. L..
2017.
« Technical challenges in narrow-gap root pass welding during tandem and hybrid laser-arc welding of a thick martensitic stainless steel ».
In International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 1305-1310.
Trans Tech Publications.
Mostafa, Ahmad, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2017.
« Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ».
Metals, vol. 7, nº 6.
Niknam, Seyed Ali, Balazinski, Marek et Songmene, Victor.
2017.
« To characterize and optimize the surface quality attributes in slot milling operation ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 1-4.
pp. 727-746.
Niknam, Seyed Ali et Songmene, Victor.
2017.
« Burr formation and correlation with cutting force and acoustic emission signals ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 231, nº 3.
pp. 399-414.
Poirier, Marc, Gagnon, Martin, Tahan, Antoine, Coutu, André et Chamberland-lauzon, Joël.
2017.
« Extrapolation of dynamic load behaviour on hydroelectric turbine blades with cyclostationary modelling ».
Mechanical Systems and Signal Processing, vol. 82.
pp. 193-205.
Poulin, Jean-René, Terriault, Patrick, Dubé, Martine et Vachon, Pierre-Luc.
2017.
« Development of a morphing wing extrados made of composite materials and actuated by shape memory alloys ».
Journal of Intelligent Material Systems and Structures, vol. 28, nº 11.
pp. 1437-1453.
Rimpault, X., Chatelain, J. F., Klemberg-Sapieha, J. E. et Balazinski, M..
2017.
« Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals ».
CIRP Journal of Manufacturing Science and Technology, vol. 16.
pp. 72-80.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta Ewa et Balazinksi, Marek.
2017.
« Burr height monitoring while drilling of CFRP/titanium/aluminium stacks ».
Mechanics & Industry, vol. 18, nº 1.
Rivest, Louis. 2017. « Des cas concrets de réussite à l’ère du 4.0 ». Communication lors de la conférence : Colloque sur l’industrie 4.0 (Montréal, QC, Canada, 25 août 2017).
Saadati, Mohammad, Azari Khosroshahi, Rasoul, Ebrahimi, Golamreza et Jahazi, Mohammad.
2017.
« Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ».
Materials Science and Engineering A, vol. 706.
pp. 142-152.
Saadati, Mohammad, Khosroshahi, Rasoul Azari, Ebrahimi, Gholamreza et Jahazi, Mohammad.
2017.
« Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ».
Materials Characterization, vol. 131.
pp. 234-243.
Sabri, V., Sattarpanah, S., Tahan, S. A., Cuillière, J. C., François, V. et Pham, X. T..
2017.
« A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 5-8.
pp. 2411-2423.
Slamani, M., Djeffal, S. et Chatelain, J-F..
2017.
« Experimental investigation of robotic machining errors of carbon fiber reinforced polymers ».
In La 3ème Conférence Internationale de Mécanique (ICM) (Annaba, Algérie, 26-27 avril 2017)
Sun, Binhan, Vanderesse, Nicolas, Fazeli, Fateh, Scott, Colin, Chen, Jianqiang, Bocher, Philippe, Jahazi, Mohammad et Yue, Stephen.
2017.
« Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ».
Scripta Materialia, vol. 133.
pp. 9-13.
Tongne, Amèvi, Desrayaud, Christophe, Jahazi, Mohammad et Feulvarch, Eric.
2017.
« On material flow in friction stir welded al alloys ».
Journal of Materials Processing Technology, vol. 239.
pp. 284-296.
Touazine, Heithem, Akab, Jordan, Jahazi, Mohammad, Tahan, Antoine, Jomaa, Walid et Bocher, Philippe.
2017.
« Modeling of the microstructure alteration induced by hard turning of Inconel 718 ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 9-12.
pp. 3705-3712.
Touazine, Heithem, Jahazi, Mohammad et Bocher, Philippe.
2017.
« Accurate determination of damaged subsurface layers in machined Inconel 718 ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 3419-3427.
Vu, Ngoc-Hung, François, Vincent, Cuillière, Jean-Christophe et Pham, Xuan-Tan.
2017.
« Development of finite strain shell elements for multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ».
In Design, Manufacturing and Applications of Composites : Proceedings of the Eleventh Joint Canada-Japan Workshop on Composites and the First Joint Canada-Japan-Vietnam Workshop on Composites August 2016, Ho Chi Minh, Vietnam (Ho Chi Minh, Vietnam, Aug. 08-12, 2016)
pp. 96-103.
DEStech publications. Zhang, C., Shahriari, D., Loucif, A., Lapierre-Boire, L. -Ph., Tremblay, R., Melkonyan, H. et Jahazi, M.. 2017. « Influence des paramètres de coulée sur la macroségrégation des aciers à haute résistance mécanique dans les lingots de grande taille: expérimentation et modélisation ». Affiche présentée lors de la conférence : ASM-Montreal Student Night (Montreal, QC, Canada, March 15, 2017).
Zhang, Chunping P., Shahriari, Davood, Loucif, Abdelhalim, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Tremblay, Rami.
2017.
« Effect of segregated alloying elements on the high strength steel properties: Application to the large size ingot casting simulation ».
In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-Mar. 02, 2017)
Coll. « Minerals Metals & Materials Series »
pp. 491-500.
Springer International Publishing.
Zhang, Chunping, Shahriari, Davood, Loucif, Abdelhalim, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Tremblay, Rami.
2017.
« Effect of thermo-physical properties on solidification behavior of large size high strength steel ingots ».
In 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim) (Qingdao, China, Aug. 16-17, 2017)
The Chinese Society for Metals. 2016
Aghazadeh, Fatemeh, Thomas, M. et Tahan, A..
2016.
« Effect of varying cutting parameters on the accuracy of tool wear monitoring in milling process ».
In CMVA Conference : Covering the Spectrum: From Fundamentals to Future Trends (Toronto, ON, Canada, Oct. 26-28, 2016)
Aidibe, Ali, Nejad, Mojtaba Kamali, Tahan, Antoine, Jahazi, Mohammad et Cloutier, Sylvain G..
2016.
« A proposition for new quality 3D indexes to measure surface roughness ».
In 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016)
Coll. « Procedia CIRP », vol. 46.
pp. 327-330.
Elsevier.
Aidibe, Ali, Tahan, Antoine et Brailovski, Vladimir.
2016.
« Metrological investigation of a selective laser melting additive manufacturing system: A case study ».
[Article de conférence]. IFAC-PapersOnLine, vol. 49, nº 31.
pp. 25-29.
Anderson, M., Bridier, F., Gholipour, J., Jahazi, M., Wanjara, P., Bocher, P. et Savoie, J..
2016.
« Mechanical and metallurgical evolution of stainless steel 321 in a multi-step forming process ».
Journal of Materials Engineering and Performance, vol. 25, nº 4.
pp. 1526-1538.
Arfaoui, M. A., Dolez, P. I., Dubé, M. et David, É..
2016.
« Hydrophobic treatment for jute fibers based on zinc oxide nanoparticles ».
In Advanced Materials - TechConnect Briefs 2016 (Washington, DC, USA, May 22-25, 2016)
pp. 284-287.
TechConnect. Arfaoui, Mohamed Ameur, Dolez, Patricia I., Dubé, Martine et David, Éric. 2016. « Preparation of hydrophobic nonwoven using recycled jute fibre and a titanium dioxide/fatty acid coating ». Communication lors de la conférence : 2nd World Congress and Expo on Recycling (Berlin, Germany, July 25-27, 2016).
Babanezhad, Kaveh, Foucault, Gilles, Tahan, Antoine et Bigeon, Jean.
2016.
« A bi-criterion flexible registration method for fixtureless inspection of compliant parts ».
In 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016)
Coll. « Procedia CIRP », vol. 46.
pp. 307-310.
Elsevier.
Beaudoin, Josée, Lefebvre, Geneviève, Normand, Mélanie, Gouri, Vanessa, Skerlj, Alexandre, Pellerin, Robert, Rivest, Louis et Danjou, Christophe.
2016.
« Prendre part à la révolution manufacturière? Du rattrapage technologique à l’Industrie 4.0 chez les PME ».
Québec : Centre francophone d’informatisation des organisations (CEFRIO). 31 p.
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2016.
« Imprecise probabilities in fatigue reliability assessment of hydraulic turbines ».
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, vol. 3, nº 1.
Berdal, M., Tahan, S-A. et Gagnon, M..
2016.
« Maintenance strategy in fatigue based on the Hasofer Lind reliability index ».
In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016)
MOSIM.
Bitterlin, Matthieu, Loucif, Abdelhalim, Charbonnier, Nicolas, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Morin, Jean-Benoît.
2016.
« Cracking mechanisms in large size ingots of high nickel content low alloyed steel ».
Engineering Failure Analysis, vol. 68.
pp. 122-131.
Blancke, Olivier, Tahan, Antoine, Komljenovic, Dragan, Amyot, Normand, Hudon, Claude et Lévesque, Melanie.
2016.
« A hydrogenerator model-based failure detection framework to support asset management ».
In 2016 IEEE International Conference on Prognostics and Health Management (ICPHM) (Ottawa, ON, Canada, June 20-22, 2016)
Piscataway, NJ, USA : IEEE.
Boton, Conrad, Rivest, Louis, Forgues, Daniel et Jupp, Julie.
2016.
« Comparing PLM and BIM from the product structure standpoint ».
In 13th IFIP WG 5.1 International Conference on Product Lifecycle Management for Digital Transformation of Industries (PLM) 2016 (Columbia, SC, USA, July 11-13, 2016)
Coll. « IFIP Advances in Information and Communication Technology (IFIPAICT) », vol. 492.
pp. 443-453.
Springer New York LLC.
Brassard, David et Dubé, M..
2016.
« Thermal characterization of conductive polymeric nanocomposites ».
In 5th International Carbon Composites Conference (IC3) (Arcachon, France, May 09-11, 2016)
Cambron, P., Lepvrier, R., Masson, C., Tahan, A. et Pelletier, F..
2016.
« Power curve monitoring using weighted moving average control charts ».
Renewable Energy, vol. 94.
pp. 126-135.
Chadha, K., Shahriari, D. et Jahazi, M..
2016.
« Constitutive modelling of ingot breakdown process of low alloy steels ».
Metallurgia Italiana, vol. 108, nº 4.
pp. 5-12.
Chadha, Kanwal, Shahriari, Davood et Jahazi, Mohammad.
2016.
« Modeling metadynamic recrystallization of a die steel during ingot breakdown process ».
In NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes (Troyes, France, July 04-07, 2016)
Coll. « MATEC Web Conferences », vol. 80.
EDP Sciences.
Chatenet, Q., Tahan, A., Gagnon, M. et Chamberland-Lauzon, J..
2016.
« Numerical model validation using experimental data: Application of the area metric on a Francis runner ».
In 28th IAHR symposium on Hydraulic Machinery and Systems (IAHR2016) (Grenoble, France, July 4-8, 2016)
Coll. « IOP Conference Series : Earth and Environmental Science », vol. 49.
IOP Publishing.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2016.
« Bayesian network as an adaptive parameter setting approach for genetic algorithms ».
Complex & Intelligent Systems, vol. 2, nº 1.
pp. 1-22.
Dang, D.-D. et Pham, X.-T..
2016.
« Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ».
In
Mathematical and Computational Approaches in Advancing Modern Science and Engineering.
pp. 413-424. Springer International Publishing.
Diagne, I., Gagnon, M. et Tahan, A..
2016.
« Modeling the dynamic behavior of turbine runner blades during transients using indirect measurements ».
In 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016) (Grenoble, France, July 04-08, 2016)
Coll. « IOP Conference Series : Earth and Environmental Science », vol. 49.
UK : IOP Publishing Ltd..
Fall, Ameth, Fesharaki, Mostafa Hashemi, Khodabandeh, Ali Reza et Jahazi, Mohammad.
2016.
« Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints ».
Metals, vol. 6, nº 11.
pp. 275-286.
Farahani, Rouhollah D., Dubé, Martine et Therriault, Daniel.
2016.
« Three-dimensional printing of multifunctional nanocomposites: manufacturing techniques and applications ».
Advanced Materials, vol. 28, nº 28.
pp. 5794-5821. Fareh, F. et Demers, V.. 2016. « Rheological behavior of Inconel 718 feedstocks used in low-pressure powder injection molding ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016).
Fareh, F., Demers, V., Turenne, S. et Scalzo, O..
2016.
« Segregation measurement of inconel 718 feedstocks used in low-pressure metal injection molding ».
In International Conference on Advanced Materials Engineering and Technology (ICAMET) (Kaohsiung City, Taiwan, Dec. 4-5, 2015)
Coll. « Materials Science Forum », vol. 857.
pp. 286-290.
Trans Tech Publications Ltd.
Fareh, Fouad, Demers, Vincent, Demarquette, Nicole R., Turenne, Sylvain et Scalzo, Orlando.
2016.
« Molding properties of Inconel 718 feedstocks used in low-pressure powder injection molding ».
Advances in Materials Science and Engineering, vol. 2016.
Gendron, Mathieu, Boudreault, Éric, Hazel, Bruce, Pham, Xuan-Tan et Champliaud, Henri.
2016.
« Non-linear optimization of a new robotic induction process for local heat treatment using thermal finite element analysis ».
International Journal of Advanced Manufacturing Technology, vol. 84, nº 5.
pp. 1013-1029.
Ghafarizadeh, Seyedbehzad, Chatelain, Jean-François et Lebrun, Gilbert.
2016.
« Effect of cutting tool lead angle on machining forces and surface finish of CFRP laminates ».
Science and Engineering of Composite Materials, vol. 23, nº 5.
pp. 543-550.
Ghafarizadeh, Seyedbehzad, Chatelain, Jean-François et Lebrun, Gilbert.
2016.
« Finite element analysis of surface milling of carbon fiber-reinforced composites ».
International Journal of Advanced Manufacturing Technology, vol. 87, nº 1.
pp. 399-409.
Ghafarizadeh, Seyedbehzad, Lebrun, Gilbert et Chatelain, Jean-François.
2016.
« Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic ».
Journal of Composite Materials, vol. 50, nº 8.
pp. 1059-1071.
Ghasemi-Nanesa, Hadi, Touazine, Heithem et Jahazi, Mohammad.
2016.
« Influence of cryogenic process parameters on microstructure and hardness evolution of AISI D2 tool steel ».
International Journal of Advanced Manufacturing Technology, vol. 85, nº 1.
pp. 881-890.
Gouin O'Shaughnessey, Patrice, Dubé, Martine et Fernandez Villegas, Irene.
2016.
« Modeling and experimental investigation of induction welding of thermoplastic composites and comparison with other welding processes ».
Journal of Composite Materials, vol. 50, nº 21.
pp. 2895-2910.
Grewal, Rupanjit, Aranas, Clodualdo, Chadha, Kanwal, Shahriari, Davood, Jahazi, Mohammad et Jonas, John J..
2016.
« Formation of Widmanstatten ferrite at very high temperatures in the austenite phase field ».
Acta Materialia, vol. 109.
pp. 23-31.
Guerineau, Benjamin, Bricogne, Matthieu, Durupt, Alexandre et Rivest, Louis.
2016.
« Mechatronics vs. cyber physical systems: towards a conceptual framework for a suitable design methodology ».
In 11th France-Japan and 9th Europe-Asia Congress on Mechatronics / 17th International Conference on Research and Education in Mechatronics (REM ) (Compiegne, France, June 15-17, 2016)
pp. 314-320.
Institute of Electrical and Electronics Engineers Inc..
Guerineau, Benjamin, Rivest, Louis, Bricogne, Matthieu et Durupt, Alexandre.
2016.
« Agile and project-planned methods in multidisciplinary product design ».
In 13th IFIP WG 5.1 International Conference on Product Lifecycle Management for Digital Transformation of Industries (PLM) (Columbia, SC, USA, July 11-13, 2016)
Coll. « IFIP Advances in Information and Communication Technology », vol. 492.
pp. 108-118.
Springer New York LLC.
Harris, Nathan, Shahriari, Davood et Jahazi, Mohammad.
2016.
« Analysis of void closure during open die forging process of large size steel ingots ».
In 16th Metal Forming International Conference (Krakow, Poland, Sept. 18-21, 2016)
Coll. « Key Engineering Materials », vol. 716.
pp. 579-585.
Jamin, Thibault, Dubé, Martine et Laberge Lebel, Louis.
2016.
« Effect of stamp-forming parameters and bend radius on the mechanical performance of curved beam carbon fiber/polyphenylene sulfide specimens ».
Journal of Composite Materials, vol. 50, nº 9.
pp. 1213-1225.
Jbira, I., Tlija, M., Louhichi, B. et Tahan, A..
2016.
« CAD/Tolerancing integration: mechanical system with geometric defects ».
In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016)
MOSIM.
Jomaa, W., Mechri, J., Lévesque, J., Gakwaya, A., Songmene, V. et Bocher, P..
2016.
« Finite element analysis of serrated chip formation in machining of 7075-T651 alluminum alloy ».
In XXVIII International Mineral Processing Congress (IMPC) (Québec, QC, Canada, Sept. 11-15, 2016)
Jomaa, W., Songmene, V. et Bocher, P..
2016.
« An investigation of machining-induced residual stresses and microstructure of induction-hardened AISI 4340 steel ».
Materials and Manufacturing Processes, vol. 31, nº 7.
pp. 838-844.
Jomaa, Walid, Songmene, Victor et Bocher, Philippe.
2016.
« An hybrid approach based on machining and dynamic tests data for the identification of material constitutive equations ».
Journal of Materials Engineering and Performance, vol. 25, nº 3.
pp. 1010-1027.
Joubair, A., Tahan, A. S. et Bonev, I. A..
2016.
« Performances of observability indices for industrial robot calibration ».
In IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Daejeon, South Korea, Oct. 09-14, 2016)
pp. 2477-2484.
IEEE.
Karganroudi, Sasan Sattarpanah, Cuillière, Jean-Christophe, Francois, Vincent et Tahan, Souheil-Antoine.
2016.
« Automatic fixtureless inspection of non-rigid parts based on filtering registration points ».
International Journal of Advanced Manufacturing Technology, vol. 87, nº 1.
pp. 687-712.
Kedadouche, M., Thomas, M. et Tahan, A..
2016.
« A comparative study between empirical wavelet transforms and empirical mode decomposition methods: application to bearing defect diagnosis ».
Mechanical Systems and Signal Processing, vol. 81.
pp. 88-107.
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2016.
« Empirical mode decomposition combined with empirical wavelets for extracting bearing frequencies in a noisy environment and early detection of defects ».
In Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the Fourth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2014, Lyon, France December 15-17 (Lyon, France, Dec. 15-17, 2014)
Coll. « Applied Condition Monitoring », vol. 4.
pp. 151-165.
Springer International Publishing.
Kibouka, Guy-Richard, Nganga-Kouya, Donatien, Kenne, Jean-Pierre, Songmene, Victor et Polotski, Vladimir.
2016.
« Production planning of a failure-prone manufacturing system under different setup scenarios ».
Journal of Applied Mathematics, vol. 2016.
Kouedeu, A. F., Kenné, J-P. et Songmene, V..
2016.
« Hybrid control of processing/reprocessing rates for a deteriorated manufacturing system ».
In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016)
MOSIM.
Lamarre, S. G., Demers, V. et Chatelain, J-F..
2016.
« Experimental study of the rheological properties and moldability of wax-based feedstocks used in low-pressure powder injection molding ».
In MONTREAL’2016 AES-ATEMA 28th International on Advances and Trends in Engineering Materials and their Applications (Montreal, QC, Canada, June 20-24, 2016)
pp. 175-183.
Advanced Engineering Solutions. Lamarre, S., Demers, V. et Chatelain, J. F.. 2016. « Moldability of feedstock for LPIM ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016).
Lépine, Marc Jr. et Tahan, Antoine S..
2016.
« The relationship between geometrical complexity and process capability ».
Journal of Manufacturing Science and Engineering, vol. 138, nº 5.
Mandatsy Moungomo, J. B., Nganga-Kouya, D., Songmene, V., Kouam, J. et Kenné, J. P..
2016.
« Machinability study of recycled aluminum cans and machining chips ».
International Journal of Advanced Manufacturing Technology, vol. 87, nº 9.
pp. 2551-2566.
Mandatsy Moungomo, Jean Brice, Kouya, Donatien Nganga et Songmene, Victor.
2016.
« Aluminium machining chips formation, treatment recycling: A review ».
In 13th International Aluminium Conference (INALCO 2016) (Naples, Italy, Sept. 21-23, 2016)
Coll. « Key Engineering Materials », vol. 710.
pp. 71-76.
Trans Tech Publications Ltd.
Mandatsy Moungomo, Jean Brice, Kouya, Donatien Nganga et Songmene, Victor.
2016.
« Turning and drilling machinability of recycled aluminum alloys ».
In 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016)
Coll. « Key Engineering Materials », vol. 710.
pp. 77-82.
Trans Tech Publications Ltd.
Masoumi, F., Jahazi, M., Shahriari, D. et Cormier, J..
2016.
« Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models ».
Journal of Alloys and Compounds, vol. 658.
pp. 981-995.
Masoumi, F., Shahriari, D., Jahazi, M., Cormier, J. et Devaux, A..
2016.
« Kinetics and mechanisms of γ′ reprecipitation in a Ni-based superalloy ».
Scientific Reports, vol. 6.
Masoumi, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2016.
« Friction stir welding of AA2024 and AA2198 Aluminum alloys: effect of tool geometry and process parameters ».
In 2nd International Conference on Welding and Non Destructive Testing (ICWNDT) (Tehran, Iran, Dec. 20-21, 2016)
Masoumi, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2016.
« The influence of tool geometry on mechanical properties of friction stir welded AA-2024 and AA-2198 joints ».
In 34th International Conference and Exhibition of ICSOBA (Quebec, QC, Canada, Oct. 03-06, 2016)
The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA).
Mirakhorli, Fatemeh, Cao, Xinjin, Pham, Xuan-Tan, Wanjara, Priti et Fihey, Jean-Luc.
2016.
« Hybrid laser-arc welding of 10-mm-thick cast martensitic stainless steel CA6NM: as-welded microstructure and mechanical properties ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 47, nº 7.
pp. 3545-3563.
Mirakhorli, Fatemeh, Cao, Xinjin, Pham, Xuan-Tan, Wanjara, Priti et Fihey, Jean-Luc.
2016.
« Post-weld tempered microstructure and mechanical properties of hybrid laser-arc welded cast martensitic stainless steel CA6NM ».
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 47, nº 6.
pp. 3245-3256.
Mourier, A., Demers, V., Baril, Y. et Figueroa, J..
2016.
« Characterization of copper-silver-copper joints fabricated by sintering of silver nanoparticles ».
In International Conference & Exhibition on Advanced & Nano Materials (ICANM) (Montreal, QC, Canada, Aug. 01-03, 2016)
pp. 145-155.
Nanesa, Hadi Ghasemi, Boulgakoff, Julien et Jahazi, Mohammad.
2016.
« Influence of prior cold deformation on microstructure evolution of AISI D2 tool steel after hardening heat treatment ».
Journal of Manufacturing Processes, vol. 22.
pp. 115-119.
Niknam, Seyed Ali, Kouam, Jules et Songmene, Victor.
2016.
« Experimental investigation on part quality and metallic particle emission when milling 6061-T6 aluminium alloy ».
International Journal of Machining and Machinability of Materials, vol. 18, nº 1-2.
pp. 120-137.
Nyffenegger, Felix, Rivest, Louis et Braesch, Christian.
2016.
« Identifying PLM themes, trends and clusters through ten years of scientific publications ».
In Product Lifecycle Management for Digital Transformation of Industries :13th IFIP WG 5.1 International Conference, PLM 2016, Columbia, SC, USA, July 11-13, 2016, Revised Selected Papers (Columbia, SC, USA, July 11-13, 2016)
Coll. « IFIP Advances in Information and Communication Technology », vol. 492.
pp. 579-591.
Springer.
Pelletier, Francis, Masson, Christian et Tahan, Antoine.
2016.
« Wind turbine power curve modelling using artificial neural network ».
Renewable Energy, vol. 89.
pp. 207-214. Pham, X. T., Vu, N. H., François, V. et Cuillière, J. -C.. 2016. « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication lors de la conférence : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) (Montréal, QC, Canada, 4 mai 2016).
Proteau, Antoine, Tahan, S.-Antoine, Maranzana, Roland et Lavoie, Pascal.
2016.
« Proposition d'un modèle d'estimation de la complexité géométrique d'un porduit usine basé sur la maquette 3D ».
In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016)
MOSIM.
Rimpault, X., Chatelain, J. F., Klemberg-Sapieha, J. E. et Balazinski, M..
2016.
« Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction ».
Measurement, vol. 91.
pp. 84-92.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta E. et Balazinski, Marek.
2016.
« Surface profile topography of trimmed and drilled carbon/epoxy composite ».
In 3rd CIRP Conference on Surface Integrity (Charlotte, NC, United states, June 8-10, 2016)
Coll. « Procedia CIRP », vol. 45.
pp. 27-30.
Elsevier.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta-Ewa et Balazinski, Marek.
2016.
« Fractal analysis of cutting force and acoustic emission signals during CFRP machining ».
In 7th CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016)
Coll. « Procedia CIRP », vol. 46.
pp. 143-146.
Elsevier.
Sabri, V., Tahan, S. A., Pham, X. T., Moreau, D. et Galibois, S..
2016.
« Fixtureless profile inspection of non-rigid parts using the numerical inspection fixture with improved definition of displacement boundary conditions ».
International Journal of Advanced Manufacturing Technology, vol. 82, nº 5-8.
pp. 1343-1352.
Sadeghi, Samira, Dargon, Thomas, Rivest, Louis et Pernot, Jean-Philippe.
2016.
« Capturing and analysing how designers use CAD software ».
In Eleventh International Symposium on Tools and Methods for Competitive Engineering (TMCE’16) (Aix-en-Provence, France, May 9-13, 2016)
Salari, Emad, Jahazi, Mohammad, Khodabandeh, Alireza et Nanesa, Hadi Ghasemi.
2016.
« Friction stir lap welding of 5456 aluminum alloy with different sheet thickness: process optimization and microstructure evolution ».
International Journal of Advanced Manufacturing Technology, vol. 82, nº 1-4.
pp. 39-48.
Sathiaraj, G. D., Tsai, C. W., Yeh, J. W., Jahazi, M. et Bhattacharjee, P. P..
2016.
« The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy ».
Journal of Alloys and Compounds, vol. 688.
pp. 752-761. Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, François, Vincent et Tahan, Souheil-Antoine. 2016. « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication lors de la conférence : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) (Montréal, QC, Canada, 4 mai 2016). Shahriari, D., Loucif, A., Harris, N., Bouissa, Y., Jahazi, M., Lapierre-Boire, L. P. et Poulain, N.. 2016. « Comprehensive simulation of solidification, forging and heat treatment process of large size high strength steel ingots ». Communication lors de la conférence : The 31st Forging Industry Technical Conference (Colombus, OH, USA, Sept. 19-20, 2016).
Slamani, Mohamed, Gauthier, Sébastien et Chatelain, Jean-François.
2016.
« Comparison of surface roughness quality obtained by high speed CNC trimming and high speed robotic trimming for CFRP laminate ».
Robotics and Computer-Integrated Manufacturing, vol. 42.
pp. 63-72.
Tongne, A., Robe, H., Desrayaud, C., Jahazi, M. et Feulvarch, E..
2016.
« Two dimensional Coupled Eulerian Lagrangian (CEL) model for banded structure prediction in friction stir welding with trigonal tool ».
In ESAFORM 2016: 19th International ESAFORM Conference on Material Forming (Nantes, France, Apr. 27-29, 2016)
Coll. « AIP Conference Proceedings », vol. 1769.
USA : American Institute of Physics.
Zoghlami, Mariem, Jahazi, Mohammad et Songmene, Victor.
2016.
« The effects of friction stir welding parameters on the characteristics of banded structure for aluminum alloys ».
In 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016)
Coll. « Key Engineering Materials », vol. 710.
pp. 155-159.
Trans Tech Publications Ltd. 2015
Abenhaim, Gad N., Desrochers, Alain, Tahan, Antoine S. et Bigeon, Jean.
2015.
« A finite-element boundary condition setting method for the virtual mounting of compliant components ».
Journal of Computing and Information Science in Engineering, vol. 15, nº 4.
Abenhaim, Gad N., Desrochers, Alain, Tahan, S.-Antoine et Bigeon, Jean.
2015.
« A virtual fixture using a FE-based transformation model embedded into a constrained optimization for the dimensional inspection of nonrigid parts ».
CAD Computer Aided Design, vol. 62.
pp. 248-258.
Aidibe, Ali et Tahan, Antoine.
2015.
« The Coherent Point Drift algorithm adapted for fixtureless metrology of non-rigid parts ».
In 13th CIRP Conference on Computer Aided Tolerancing, CAT 2014, May 11, 2014 - May 14, 2014 (Hangzhou, China, May 11-14, 2014)
Coll. « Procedia CIRP », vol. 27.
pp. 84-89.
Elsevier.
Aidibe, Ali et Tahan, S.-Antoine.
2015.
« Adapting the coherent point drift algorithm to the fixtureless dimensional inspection of compliant parts ».
International Journal of Advanced Manufacturing Technology, vol. 79, nº 5.
pp. 831-841.
Aranas, Clodualdo, Grewal, Rupanjit, Chadha, Kanwal, Shahriari, Davood, Jahazi, Mohammad et Jonas, John J..
2015.
« Formation of widmanstätten ferrite in a C-Mn steel at temperatures high in the austenite phase field ».
In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 201 (PTM 2015) (Whistler, BC, Canada, June 28, 2015 - July 3, 2015)
pp. 613-620.
International Conference on Solid-Solid Phase Transformations in Inorganic Materials.
Arpin-Pont, Jérémy, Gagnon, Martin, Tahan, S.-Antoine, Coutu, André et Thibault, Denis.
2015.
« Methodology for estimating strain gauge measurement biases and uncertainties on isotropic materials ».
Journal of Strain Analysis for Engineering Design, vol. 50, nº 1.
pp. 40-50.
Asgarinia, Soroush, Viriyasuthee, Chanvit, Phillips, Steven, Dubé, Martine, Baets, Joris, Van Vuure, Aart, Verpoest, Ignaas et Lessard, Larry.
2015.
« Tension-tension fatigue behaviour of woven flax/epoxy composites ».
Journal of Reinforced Plastics and Composites, vol. 34, nº 11.
pp. 857-867.
Bahloul, A., Djebara, A., Saidi, M. N. et Songmene, V..
2015.
« Simulating grinding dust dispersion and assessment of the efficiency of local capture ventilation ».
In Proceedings of the 11th International Conference on Industrial Ventilation (Ventilation 2015) (Shanghai, China, Oct. 26-28, 2015)
pp. 598-605.
International Conference on Industrial Ventilation. Belhadj, T., Songmene, V. et Jahazi, M.. 2015. « Influence des paramètres de procédé sur la distorsion de grandes plaques d'aluminium formées par thermoformage : phase d'éjection ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (Chicoutimi, QC, Canada, 11 nov. 2015).
Blancke, Olivier, Amyot, Normand, Hudon, Claude, Lévesque, Mélanie et Tahan, Antoine.
2015.
« A new generic approach to convert FMEA in causal trees for the purpose of hydro-generator rotor failure mechanisms identification ».
In Annual Conference of the Prognostics and Health Management Society 2015 (Coronado, CA, USA, Oct. 18-24, 2015)
PHM Society.
Boukani, H. H., Chentouf, S. M., Viens, Martin, Tahan, S.-Antoine et Gagnon, M..
2015.
« The effect of martensitic stainless steel microstructure on the ultrasonic inspection of turbine runner joints ».
In AIP Conference Proceedings (Boise, ID, USA, July 20-25, 2014)
pp. 909-916.
USA : AIP - American Institute of Physics.
Boulle, Adrien, Dubé, Martine et Gosselin, Frédérick P..
2015.
« Parametric study of an elliptical fuselage made of a sandwich composite structure ».
Mechanics Research Communications, vol. 69.
pp. 129-135.
Cardonne, M., Khay, M., Vachon, P. L., Dubé, M. et Ngô, A. D..
2015.
« Effect of high temperature on the fatigue behaviour of a plain weave CFRP laminate under tension-tension loading ».
In 20th International Conference on Composite Materials (ICCM 2015) (Copenhagen, Denmark, July 19-24, 2015)
International Committee on Composite Materials.
Cardonne, M., Khay, M., Vachon, P. L., Dubé, M. et Ngô, A. D..
2015.
« Effect of high temperature on the fatigue life of a plain weave CFRP laminate under tension-tension loading ».
In 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015)
MSI Scandinavia. Carrier, Mathieu, Dansereau, Mathieu, Fernandes, Julio, Mérette, Jean-Sébastien, Petit, Yvan et Songmene, Victor (inventeurs) 12 mai 2015. « Alésoir acétabulaire ». Valorisation recherche hôpital Sacré-Coeur de Montréal, École de technologie supérieure (titulaire(s)). Brevet canadien CA 2696990. [Titre traduit: Acetabular reamer with locking collar].
Chadha, K., Shahriari, D. et Jahazi, M..
2015.
« Constitutive modelling of ingot breakdown process of low alloy steels ».
In 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2015) (Bardolino, Italy, Sept. 23-25, 2015)
Associazione Italiana di Metallurgia.
Chadha, Kanwal, Bhattacharjee, Pinaki Prasad et Jahazi, Mohammad.
2015.
« The effect of strain reversal during high pressure torsion on the microstructure evolution and texture of aluminum alloys ».
In Characterization of Minerals, Metals, and Materials 2015 - TMS 2015 144th Annual Meeting and Exhibition, March 15, 2015 - March 19, 2015 (Orlando, FL, USA, March 15-19, 2015)
Coll. « TMS Annual Meeting »
pp. 107-114.
Minerals, Metals and Materials Society.
Chadha, Kanwal, Jahazi, Mohammad, Loucif, Abdelhalim et Shahriari, Davood.
2015.
« Effect of deformation temperature and interpass time on microstructure evolution and mechanical properties of medium carbon low alloy steel during ingot breakdown process ».
In 2015 TMS Annual Meeting & Exhibition : Phase Transformations and Microstructural Evolution (Orlando, FL, Canada, Mar. 15-19, 2015)
Chamanfar, A., Jahazi, M., Bonakdar, A., Morin, E. et Firoozrai, A..
2015.
« Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades ».
Materials Science and Engineering: A, vol. 642.
pp. 230-240.
Chamanfar, A., Jahazi, Mohammad et Cormier, J..
2015.
« A review on inertia and linear friction welding of Ni-based superalloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 46, nº 4.
pp. 1639-1669.
Chamanfar, A., Jahazi, Mohammad, Gholipour, J., Wanjara, P. et Yue, S..
2015.
« Analysis of integrity and microstructure of linear friction welded Waspaloy ».
Materials Characterization, vol. 104.
pp. 149-161.
Chentouf, Samir Mourad, Belhadj, T., Bombardier, N. et Jahazi, M..
2015.
« Influence of reduction rate on the characteristics of cavities in superplastically formed 5083 aluminum alloy ».
In 54th annual conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, R..
2015.
« Evaluation of genotypic diversity measurements exploited in real-coded representation ».
arXiv. 13 p.
Dang, D-D. et Pham, X. T..
2015.
« Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ».
In 23rd Annual Conference of the Computational Fluid Dynamics Society of Canada (CFDSC 2015) (Waterloo, ON, Canada, June 7-12, 2015)
Daoud, M., Chatelain, J. F. et Bouzid, A..
2015.
« Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 9-12.
pp. 1987-1997.
Daoud, M., Jomaa, W., Chatelain, J. F. et Bouzid, A..
2015.
« A machining-based methodology to identify material constitutive law for finite element simulation ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 9-12.
pp. 2019-2033.
Demers, V., Turenne, S. et Scalzo, O..
2015.
« Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy ».
Journal of Materials Science, vol. 50, nº 7.
pp. 2893-2902.
Demers, Vincent, Turenne, Sylvain et Scalzo, Orlando.
2015.
« Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniques ».
Advanced Powder Technology, vol. 26, nº 3.
pp. 997-1004.
Dubé, Martine, Chazerain, Aurélie, Hubert, Pascal, Yousefpour, Ali et Bersee, Harald E. N..
2015.
« Characterization of resistance-welded thermoplastic composite double-lap joints under static and fatigue loading ».
Journal of Thermoplastic Composite Materials, vol. 28, nº 6.
pp. 762-776.
Farahani, R. D., Kaganj, A. B., Hojjati, M. S., Hoa, Van et Dubé, M..
2015.
« Manufacturing of double-curvature CF/PPS continuous-fibre woven thermoplastic composite parts through stamp forming ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
Farahani, Rouhollah Dermanaki, Tavarez, Jason et Dubé, Martine.
2015.
« Carbon nanotube-based conductive films for induction welding of thermoplastic polymers and composites ».
In 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015)
MSI Scandinavia. Fareh, F., Demers, V., Turenne, S. et Scalzo, O.. 2015. « Segregation measurement of Inconel 718 feedstocks used in low-pressure metal injection molding ». Communication lors de la conférence : International Conference on Advanced materials engineering & technology (ICAMET 2015) (Kaohsiung, Taiwan, Dec. 4-6, 2015).
Francie, Kouedeu Annie, Jean-Pierre, Kenne, Pierre, Dejax, Victor, Songmene et Vladimir, Polotski.
2015.
« Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ».
Journal of Manufacturing Systems, vol. 37, nº Part 3.
pp. 662-671.
Gaye, Khalifa, Coulibaly, Amadou et Gardoni, Mickael.
2015.
« Product metamodel based on the coupling of the extended design matrix X -DSM and SysML formalism ».
In 5th International Conference on Industrial Engineering and Operations Management (IEOM) (Dubai, United Arab Emirates, Mar. 03-05, 2015)
Institute of Electrical and Electronics Engineers Inc..
Ghasemi Nanesa, H. et Jahazi, Mohammad.
2015.
« Alternative phase transformation path in cryogenically treated AISI D2 tool steel ».
Materials Science and Engineering: A, vol. 634.
pp. 32-36.
Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Naraghi, Reza.
2015.
« Martensitic transformation in AISI D2 tool steel during continuous cooling to 173K ».
Journal of Materials Science, vol. 50, nº 17.
pp. 5758-5768.
Hamon, T., Pellerin, R. et Rivest, Louis.
2015.
« La conduite de projets de transformation de processus dans le secteur aérospatial : une revue critique des méthodologies de réingénierie ».
In 2e Conférence internationale en gestion de projet de l’UQTR (Trois-Rivières, QC, Canada, 28-29 mai 2015)
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2015.
« A hybrid method combining Teager Kaiser energy operator, empirical mode decomposition and minimum entropy deconvolution for monitoring gears damages ».
Mechanics and Industry, vol. 16, nº 6.
Kedadouche, Mourad, Thomas, Marc, Tahan, Antoine et Guilbault, Raynald.
2015.
« Monitoring gears by vibration measurements: Lempel-Ziv complexity and approximate entropy as diagnostic tools ».
In 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014)
Coll. « MATEC Web of Conferences », vol. 20.
EDP Sciences.
Kedadouche, Mourad, Thomas, Marc, Tahan, Antoine et Guilbault, Raynald.
2015.
« Nonlinear parameters for monitoring gear: comparison between lempel-ziv, approximate entropy, and sample entropy complexity ».
Shock and Vibration, vol. 2015.
Khakpour, Hamed, Birglen, Lionel et Tahan, Souheil-Antoine.
2015.
« Analysis and optimization of a new differentially driven cable parallel robot ».
Journal of Mechanisms and Robotics, vol. 7, nº 3.
Khakpour, Hamed, Birglen, Lionel et Tahan, Souheil-Antoine.
2015.
« Uniform scanning path generation for abrasive waterjet polishing of free-form surfaces modeled by triangulated meshes ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 5.
pp. 1167-1176.
Khay, M., Cardonne, M., Vachon, P-L., Dubé, M., Ngô, A. D. et Ganesan, R..
2015.
« Experimental investigation of the tensile-tensile fatigue behaviour of carbon/epoxy plain weave laminates ».
In Design, manufacturing and applications of composites : proceedings of the Tenth Joint Canada-Japan Workshop on Composites, the University of British Columbia, Vancouver, Canada, August 2014 (Vancouver, BC, Canada, Aug. 19-21, 2014)
pp. 36-44.
DEStech Publications, Inc..
Kouam, Jules, Songmene, Victor, Balazinski, Marek et Hendrick, Patrick.
2015.
« Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy ».
International Journal of Advanced Manufacturing Technology, vol. 79, nº 5.
pp. 1325-1334.
Kouedeu, A. F., Kenné, J.-P., Dejax, P., Songmene, V. et Polotski, V..
2015.
« Production and maintenance planning for a failure-prone deteriorating manufacturing system: a hierarchical control approach ».
International Journal of Advanced Manufacturing Technology, vol. 76, nº 9.
pp. 1607-1619.
Lessard, Hugues, Lebrun, Gilbert, Benkaddour, Abdelhaq et Pham, Xuan-Tan.
2015.
« Influence of process parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone laminate ».
Composites Part A: Applied Science and Manufacturing, vol. 70.
pp. 59-68.
Lessard, Larry, Asgarinia, Soroush, Viriyasuthee, Chanvit, Phillips, Steven, Dubé, Martine, Baets, Joris, Van Vuure, Aart et Verpoest, Ignaas.
2015.
« Fatigue behaviour of woven flax/epoxy composites ».
In 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015)
MSI Scandinavia.
Loucif, Abdelhalim, Fredj, Emna Ben, Jahazi, Mohammad, Lapierreboire, Louis-Philippe, Tremblay, Rami et Beauvais, Raymond.
2015.
« Analysis of macrosegregation in large size forged ingot of high strength steel ».
In Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (ICS 2015) (Beijing, China, May 12-14, 2015)
pp. 1043-1046.
Chinese Society for Metals.
Louhichi, Borhen, Abenhaim, Gad N. et Tahan, Antoine S..
2015.
« CAD/CAE integration: updating the CAD model after a FEM analysis ».
International Journal of Advanced Manufacturing Technology, vol. 76, nº 1.
pp. 391-400.
Louhichi, Borhen, Tlija, Mehdi, Benamara, Abdelmajid et Tahan, Antoine.
2015.
« An algorithm for CAD tolerancing integration: Generation of assembly configurations according to dimensional and geometrical tolerances ».
CAD Computer Aided Design, vol. 62.
pp. 259-274.
Maamri, Ilyes, Barka, Noureddine, El Ouafi, Abderrazak et Jahazi, Mohammad.
2015.
« A sensitivity study of 4340 steel hardness profile heat-treated by laser ».
International Journal of Emerging Technology and Advanced Engineering, vol. 5, nº 9.
pp. 7-13.
Mirakhorli, Fatemeh, Cao, Xinjin, Pham, Xuan Tan, Wanjara, Priti et Fihey, Jean-Luc.
2015.
« Hybrid laser-arc welding of cast martensitic stainless steel CA6NM: Post-weld tempered microstructure and mechanical properties ».
In Conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)
Mullier, Guillaume et Chatelain, Jean-François.
2015.
« Influence of thermal damage on the mechanical strength of trimmed CFRP ».
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 9, nº 8.
pp. 1509-1516.
Mullier, Guillaume et Chatelain, Jean-François.
2015.
« Influence of thermal damage on the mechanical strength of trimmed CFRP ».
In 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015)
Mullier, Guillaume et Chatelain, Jean-François. 2015. « Influence of thermal damage on the mechanical strength of trimmed CFRP ». Communication lors de la conférence : 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015).
Nanesa, Hadi Ghasemi, Jahazi, Mohammad et Levasseur, Tom.
2015.
« On the martensitic transformation of AISI D2 tool steel through cryogenic cooling ».
In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015)
pp. 641-642.
International Conference on Solid-Solid Phase Transformations in Inorganic Materials.
Nanesa, Hadi Ghasemi, Jahazi, Mohammad et Levasseur, Tom.
2015.
« Transmission electron microscopy study of micro-structure evolution in cryotreated AISI D2 tool steel ».
In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015)
pp. 735-736.
International Conference on Solid-Solid Phase Transformations in Inorganic Materials.
Nguyen, Hong-Den, Deshaies, Martin et Pham, Xuan-Tan.
2015.
« Simulation-assisted mold design for forming of thermoplastic PPS/ carbon fiber composites ».
In 62nd CASI Aeronautics Conference (Montreal, QC, Canada, May 18-21, 2015)
Nguyen, Sy Quy et Chatelain, Jean-Francois.
2015.
« Study of the milling process for thin components using a flexible setup configuration ».
[Article de conférence]. Applied Mechanics and Materials, vol. 704.
pp. 27-31.
Niknam, Seyed Ali et Songmene, Victor.
2015.
« Milling burr formation, modeling and control: A review ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 229, nº 6.
pp. 893-909.
Pinquié, Romain, Rivest, Louis, Segonds, Frédéric et Véron, Philippe.
2015.
« An illustrated glossary of ambiguous PLM terms used in discrete manufacturing ».
International Journal of Product Lifecycle Management, vol. 8, nº 2.
pp. 142-171.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, J.E. et Balazinksi, M..
2015.
« A new approach for surface profile roughness characterization in the laminated composite ply plane ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
Canadian Aeronautics and Space Institute.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, J.E. et Balazinski, M..
2015.
« Surface condition of high speed trimming of CFRP ».
In 6th International Conference on science and technology of composite materials (COMAT) (Buenos Aires, Argentina, May 7-8, 2015)
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta E. et Balazinksi, Marek.
2015.
« Surface quality assessment of CFRP high speed trimming using fractal analyses of the cutting force signals ».
In 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta E. et Balazinksi, Marek.
2015.
« Tool wear impact on surface roughness condition of CFRP high speed trimming ».
In 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
Saidi, M. N., Songmene, Victor, Kouam, J. et Bahloul, A..
2015.
« Experimental investigation on fine particle emission during granite polishing process ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 9.
pp. 2109-2121.
Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, Francois, Vincent et Tahan, Souheil-Antoine.
2015.
« An improvement of fixtureless inspection for non-rigid parts based on filtering sample points ».
In 25th Canadian Congress of Applied Mechanics (London, ON, Canada, May 31 - June 4, 2015)
Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, Francois, Vincent et Tahan, Souheil-Antoine. 2015. « Inspection automatique de pièces flexibles sans gabarit de conformité ». Affiche présentée lors de la conférence : 22e édition du Concours d’affiches scientifiques de l'Université du Québec à Trois-Rivières (UQTR) (Trois-Rivières, QC, Canada, 25-26 mars 2015).
Shahriari, D., Loucif, Abdelhalim, Jahazi, Mohammad, Tremblay, R. et Beauvais, R..
2015.
« 3D numerical simulation of solidification of large size ingots of high strength steels ».
In 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2015) (Bardolino, Italy, Sept. 23-25, 2015)
Slamani, M. et Chatelain, J. F..
2015.
« High-speed robotic trimming of CFRP ».
In
Machinability of Fibre-Reinforced Plastics.
Coll. « Advanced Composites », vol. 4.
pp. 83-101. De Gruyter.
Slamani, Mohamed et Chatelain, Jean-François.
2015.
« Issues and challenges in robotic trimming of CFRP ».
In ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics, Proceedings (Colmar, Alsace, France, July 21-23, 2015)
pp. 400-405.
SciTePress. Slamani, Mohamed et Chatelain, Jean-François. 2015. « Issues and challenges in robotic trimming of CFRP ». Communication lors de la conférence : ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics (Colmar, Alsace, France, July 21-23, 2015).
Slamani, Mohamed, Chatelain, Jean-François et Hamedanianpour, Hossein.
2015.
« Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP ».
International Journal of Material Forming, vol. 8, nº 2.
pp. 305-316.
Slamani, Mohamed, Gauthier, Sébastien et Chatelain, Jean-François.
2015.
« A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs ».
Measurement: Journal of the International Measurement Confederation, vol. 59.
pp. 268-283.
Songmene, Victor, Khettabi, Riad, Viens, Martin, Kouam, Jules, Hallé, Stéphane, Morency, François, Masounave, Jacques et Djebara, Abdelhakim.
2015.
« Nanoparticle measurement, control and characterization: procedure applied to machining and mechanical friction ».
Coll. « Studies and Research Projects », vol. R-864.
IRSST. 82 p.
Songmene, Victor et Njoya Doko, R..
2015.
« Fine metallic particle emission when milling aluminium alloys and aluminium metal matrix composites ».
In 7th Light Metals Technology Conference (LMT2015) (Port Elizabeth, South Africa, July 27-29, 2015)
Coll. « Materials Science Forum », vol. 828-829.
pp. 381-388.
Switzerland : Trans Tech Publications.
Tongne, A., Jahazi, Mohammad, Feulvarch, E. et Desrayaud, C..
2015.
« Banded structures in friction stir welded Al alloys ».
Journal of Materials Processing Technology, vol. 221.
pp. 269-278.
Tongne, Amèvi, Desrayaud, Christophe, Jahazi, Mohammad et Feulvarch, Eric.
2015.
« Analytical modeling of material flow in friction stir welding ».
In 11th International Seminar on Numerical Analysis of Weldability (Graz, Austria, Sept. 27-30, 2015)
Vaur, Romain, Côté, Nicolas, Dubé, Martine, Dano, Marie-Laure et Potvin, Marie-Josée. 2015. « Repair of thermoplastic composite structures using induction welding ». Affiche présentée lors de la conférence : Colloque du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance (CREPEC) (Montréal, QC, Canada, 5 juin 2015). 2014
Aidibe, Ali et Tahan, Antoine.
2014.
« The inspection of deformable bodies using curvature estimation and Thompson-Biweight test ».
International Journal of Advanced Manufacturing Technology, vol. 71, nº 9-12.
pp. 1733-1747.
Barka, Noureddine, Chebak, Ahmed, El Ouafi, Abderrazak, Jahazi, Mohammad et Menou, Abdellah.
2014.
« A new approach in optimizing the induction heating process using flux concentrators: Application to 4340 steel spur gear ».
Journal of Materials Engineering and Performance, vol. 23, nº 9.
pp. 3092-3099.
Bolduc, Guillaume et Rivest, Louis.
2014.
« Structural steel truck loading problem: documenting expert loaders reasoning ».
In Proceedings of the 2014 International Conference on Innovative Design and Manufacturing (ICIDM) (Montreal, QC, Canada, Aug. 13-15, 2014)
pp. 41-46.
Piscataway, N. J., USA : IEEE.
Boukani, H. H., Viens, Martin, Tahan, S.-Antoine et Gagnon, M..
2014.
« On the performance of nondestructive testing methods in the hydroelectric turbine industry ».
In 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014) (Montreal, QC, Canada, Sept. 22-26, 2014)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 22.
IOP Publishing.
Boulle, A., Gosselin, F. P. et Dubé, Martine.
2014.
« Weight optimisation of an elliptical cross-section of a sandwich fuselage ».
In 16th European Conference on Composite Materials, ECCM 2014 (Sevilla, Spain, June 22-26, 2014)
European Conference on Composite Materials, ECCM.
Bricogne, M., Rivest, Louis, Troussier, N. et Eynard, B..
2014.
« Concurrent versioning principles for collaboration: towards PLM for hardware and software data management ».
International Journal of Product Lifecycle Management, vol. 7, nº 1.
pp. 17-37.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2014.
« Evolution of flow stress and microstructure during isothermal compression of Waspaloy ».
Materials Science and Engineering A, vol. 615.
pp. 497-510.
Chentouf, S. M., Jahazi, M., Lapierre-Boire, L. P. et Godin, S..
2014.
« Characteristics of austenite transformation during post forge cooling of large-size high strength steel Ingots ».
Metallography, Microstructure, and Analysis, vol. 3, nº 4.
pp. 281-297.
Chentouf, Samir Mourad, Jahazi, Mohammad et Fortin, Rejean.
2014.
« Influence of the quench process on microstructure evolution in a landing gear steel ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME).
Dadaei, Mostafa, Omidvar, Hamid, Bagheri, Behrouz, Jahazi, Mohammad et Abbasi, Mahmoud.
2014.
« The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy ».
International Journal of Materials Research, vol. 105, nº 4.
pp. 369-374.
Daoud, M., Jomaa, W., Chatelain, Jean-François, Bouzid, Abdel-Hakim et Songmene, Victor.
2014.
« Identification of material constitutive law constants using machining tests: A response surface methodology based approach ».
In 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014)
Coll. « WIT Transactions on the Built Environment »
pp. 25-36.
WITPress.
Daoud, Monzer, Chatelain, Jean-François et Bouzid, Hakim.
2014.
« On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME).
Djebara, Abdelhakim, Bahloul, Ali, Ntcheping, Bernard Wenga et Songmene, Victor.
2014.
« Dilution method to characterize fine and ultrafine particle at high concentrations ».
In Conference Proceedings : 1st International Conference on Atmospheric Dust : DUST 2014 (Castellaneta Marina, Italy, June 1-6, 2014)
Coll. « ProScience », vol. 1.
pp. 312-317.
Digilabs Publishing.
Djebara, Abdelhakim, Bahloul, Ali et Songmene, Victor.
2014.
« Technique de dilution des concentrations de la poussière émise lors de la transformation des matériaux ».
In 36e Congrès de l'AQHSST :Bien s'outiller pour intervenir: se développer, se spécialiser, se renouveler : Congrès de l'Association québécoise pour l’hygiène, la santé et la sécurité du travail (Beaupré, QC, Canada, 7-9 mai 2014)
Association québécoise pour l’hygiène, la santé et la sécurité du travail.
Ebrahimi, Gholam Reza, Momeni, Amir, Jahazi, Mohammad et Bocher, Philippe.
2014.
« Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 45, nº 4.
pp. 2219-2231.
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2014.
« Influence of load spectrum assumptions on the expected reliability of hydroelectric turbines: A case study ».
Structural Safety, vol. 50.
pp. 1-8.
Ghafarizadeh, Seyedbehzad, Chatelain, Jean-François et Lebrun, Gilbert.
2014.
« Experimental investigation to study cutting temperature during milling of unidirectional Carbon Fiber Reinforced Plastic ».
In ASME 2014 International Mechanical Engineering Congress and Exposition, IMECE 2014, November 14, 2014 - November 20, 2014 (Montreal, QC, Canada, Nov. 14-20, 2014)
Montreal, QC, Canada : American Society of Mechanical Engineers (ASME).
Ghasemi-Nanesa, Hadi et Jahazi, Mohammad.
2014.
« Simultaneous enhancement of strength and ductility in cryogenically treated AISI D2 tool steel ».
Materials Science and Engineering A, vol. 598.
pp. 413-419.
Ghasemi-Nanesa, Hadi, Jahazi, Mohammad, Trigo, Gil et Levasseur, Tom.
2014.
« Influence of cryogenic treatment on microstructure characteristics and mechanical properties of AISI D2 tool steel ».
In TMS 2014 Supplemental Proceedings
pp. 991-997.
Hoboken, NJ, USA : John Wiley & Sons, Inc..
Gouin, Patrice et Dubé, Martine.
2014.
« Induction welding of thermoplastic composites: effects of processing parameters on joint quality ».
In SAMPE Europe 35th International Conference SEICO 14 (Paris, France, Mar. 10-11, 2014)
Jamin, T., Dubé, Martine et Laberge Lebel, L..
2014.
« Stamp forming of thermoplastic composites: effect of radius and thickness on part quality ».
In 16th European Conference on Composite Materials, ECCM 2014 (Sevilla, Spain, June 22-26, 2014)
European Conference on Composite Materials, ECCM.
Jomaa, W., Songmene, Victor et Bocher, Philippe.
2014.
« Surface finish and residual stresses induced by orthogonal dry machining of AA7075-T651 ».
Materials, vol. 7, nº 3.
pp. 1603-1624.
Jomaa, Walid, Daoud, Monzer, Songmene, Victor, Bocher, Philippe et Châtelain, Jean-François.
2014.
« Identification and validation of Marusich's constitutive law for finite element modeling of high speed machining ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME). Jomaa, Walid, Songmene, Victor et Bocher, Philippe. 2014. « Material behavior modeling during high speed machining of 6061-T6 and 7075-T651 alloys ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014).
Kamguem, R., Tahan, S.-Antoine et Songmene, Victor.
2014.
« Surface roughness estimation of turned parts from optical image measurements and wavelet decomposition ».
International Journal of Materials Forming and Machining Processes, vol. 1, nº 1.
pp. 48-72.
Kedadouche, M., Thomas, M. et Tahan, A..
2014.
« Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ».
Mechanics & Industry, vol. 15, nº 6.
pp. 467-476.
Kedadouche, M., Thomas, Marc et Tahan, Antoine.
2014.
« Monitoring machines by using a hybrid method combining MED, EMD, and TKEO ».
Advances in Acoustics and Vibration, vol. 2014.
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2014.
« Empirical mode decomposition of acoustic emission for early detection of bearing defects ».
In Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013 (Ferrara, Italy
Coll. « Lecture Notes in Mechanical Engineering »
pp. 367-377.
Springer Berlin Heidelberg.
Keivani, R., Jahazi, Mohammad, Pham, Tan, Khodabandeh, A. R. et Afshar, M. R..
2014.
« Predicting residual stresses and distortion during multisequence welding of large size structures using FEM ».
International Journal of Advanced Manufacturing Technology, vol. 73, nº 1-4.
pp. 409-419.
Khakpour, H., Birglen, L. et Tahan, S.-Antoine.
2014.
« Synthesis of differentially driven planar cable parallel manipulators ».
IEEE Transactions on Robotics, vol. 30, nº 3.
pp. 619-630.
Khakpour, H., Birglenl, L., Tahan, S.-Antoine et Paquet, F..
2014.
« Experimental study on abrasive waterjet polishing of hydraulic turbine blades ».
In 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014 (Montreal, QC, Canada, Sept. 22-26, 2014)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 22.
Institute of Physics Publishing.
Kouam, Jules, Djebara, Abdelhakim et Songmene, Victor.
2014.
« Experimental investigation on the effect of pre-holes on drilling process performance of aluminum alloys: forces, surface finish and dust emission ».
Advances in Materials Science and Applications, vol. 3, nº 1.
pp. 13-23. Kouedeu, A. F., Kenné, J. P., Dejax, P., Songmene, V. et Polostki, V.. 2014. « Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014).
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir.
2014.
« Production planning of a failure-prone manufacturing/remanufacturing system with production-dependent failure rates ».
Applied Mathematics, vol. 5, nº 10.
pp. 1557-1572.
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir.
2014.
« Stochastic optimal control of manufacturing systems under production-dependent failure rates ».
International Journal of Production Economics, vol. 150.
pp. 174-187.
Lebel, L.L., Lachance, J-P., Brunel, J-E., Jamin, T. et Dubé, M..
2014.
« Modeling of out-of-plane stresses in C/PPS composite L-shape brackets ».
In Design, manufacturing and applications of composites : proceedings of the Tenth Joint Canada-Japan Workshop on Composites, the University of British Columbia, Vancouver, Canada, August 2014 (Vancouver, BC, Canada, Aug. 19-21, 2014)
pp. 164-171.
DEStech Publications, Inc..
Louhichi, Borhen et Rivest, Louis.
2014.
« Maintaining consistency between CAD elements in collaborative design using association management and propagation ».
Computers in Industry, vol. 65, nº 1.
pp. 124-135.
Masoumi, Fatemeh, Jahazi, Mohammad, Cormier, J. et Shahriari, D..
2014.
« Dissolution kinetics and morphological changes of γ′ in AD730TM superalloy ».
In 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens, France, May 12-16, 2014)
Coll. « MATEC Web of Conferences », vol. 14.
Mirakhorli, F., Cao, X., Pham, Tan, Wanjara, P. et Fihey, Jean-Luc.
2014.
« Hybrid fiber laser-arc welding of 10-mm thick CA6NM stainless steel ».
In Materials Science and Technology Conference and Exhibition 2014, MS and T 2014 (Pittsburgh, PA, USA, Oct. 12-16, 2014)
pp. 1891-1900.
Association for Iron and Steel Technology, AISTECH.
Momeni, A., Ebrahimi, G. R., Jahazi, Mohammad et Bocher, Philippe.
2014.
« Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size ».
Journal of Alloys and Compounds, vol. 587.
pp. 199-210.
Nguyen-Tri, Phuong, El Aidani, Rachid, Leborgne, Étienne, Pham, Tan et Vu-Khanh, Toan.
2014.
« Chemical ageingaging of a polyester nonwoven membrane used in aerosol and drainage filter ».
Polymer Degradation and Stability, vol. 101, nº 1.
pp. 71-80.
Niknam, S. A. et Songmene, Victor.
2014.
« Analysis of friction and burr formation in slot milling ».
In 47th CIRP Conference on Manufacturing Systems, CMS 2014 (Windsor, Canada, Apr. 28-30, 2014)
Coll. « Procedia CIRP », vol. 17.
pp. 755-759.
Elsevier.
Niknam, S. A. et Songmene, Victor.
2014.
« Analytical modelling of slot milling exit burr size ».
International Journal of Advanced Manufacturing Technology, vol. 73, nº 1-4.
pp. 421-432.
Niknam, Seyed A., Wygowski, Walery, Balazinksi, Marek et Songmene, Victor.
2014.
« Milling burr formation and avoidance ».
In
Machinability of Advanced Materials.
pp. 57-93. John Wiley & Sons, Inc..
Niknam, Seyed Ali, Khettabi, Raid et Songmene, Victor.
2014.
« Machinability and machining of titanium alloys: a review ».
In
Machining of Titanium Alloys.
Coll. « Materials Forming, Machining and Tribology ».
pp. 1-30. Springer-Verlag Berlin Heidelberg.
Niknam, Seyed Ali, Zedan, Yasser et Songmene, Victor.
2014.
« Machining burrs formation & deburring of aluminium alloys ».
In
Light metal alloys applications.
pp. 99-122. InTech publication.
Poirier, Erik, Aksenova, Gulnaz, Collot, Pierre, Rivest, Louis, Forgues, Daniel et Doré, Sylvie.
2014.
« Transitioning to building information modeling and product lifecycle management in the Quebec construction industry: challenges, possible solutions and proposed action items ».
Coll. « BIM & PLM Workshop ».
Montréal : École de technologie supérieure.
Radvar-Esfahlan, Hassan et Tahan, S.-Antoine.
2014.
« Robust generalized numerical inspection fixture for the metrology of compliant mechanical parts ».
International Journal of Advanced Manufacturing Technology, vol. 70, nº 5-8.
pp. 1101-1112.
Rivest, Louis.
2014.
« Editorial ».
International Journal of Product Lifecycle Management, vol. 7, nº 1.
pp. 1-2.
Rosenbaum, A., Chamanfar, A., Jahazi, Mohammad et Bonakdar, A..
2014.
« Microstructure analysis of broached inconel-718 gas turbine disc fir-trees ».
In Proceedings of the ASME Turbo Expo (Dusseldorf, Germany, June 16-20, 2014)
American Society of Mechanical Engineers (ASME). Saidi, Mohamed Nejib, Songmene, Victor et Kouam, Jules. 2014. « Design, fabrication and testing of a polishing tool adaptable to machine-tools ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014).
Salari, Emad, Jahazi, Mohammad, Khodabandeh, Alireza et Ghasemi-Nanesa, Hadi.
2014.
« Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets ».
Materials and Design, vol. 58.
pp. 381-389.
Slamani, Mohamed, Gauthier, Sébastien et Chatelain, Jean-François.
2014.
« Analysis of trajectory deviation during high speed robotic trimming of carbon-fiber reinforced polymers ».
Robotics and Computer-Integrated Manufacturing, vol. 30, nº 5.
pp. 546-555. Songmene, Victor. 2014. « Outillage - optimisation d'usinage ». Communication lors de la conférence : 1re édition de l'évènement Alliance Monde Polymères (Lévis, QC, Canada, 11-12 février 2014).
Songmene, Victor, Khettabi, Riad, Viens, Martin, Kouam, Jules, Hallé, Stéphane, Morency, François, Masounave, Jacques et Djebara, Abdelhakim.
2014.
« Mesure, contrôle et caractérisation des nanoparticules : Procédure appliquée à l'usinage et au frottement mécanique ».
Coll. « Études et recherches », vol. R-814.
Montréal, Québec, Canada : IRSST. 93 p.
Touazine, H., Jahazi, Mohammad et Bocher, Philippe.
2014.
« Influence of hard turning on microstructure evolution in the subsurface layers of Inconel 718 ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME). 2013
Abenhaim, G. N., Desrochers, A. et Tahan, Antoine S..
2013.
« An Investigation of the Repeatability of Nonrigid Parts Measurements: A Case Study of an Aluminum Panel ».
In 12th CIRP Conference on Computer Aided Tolerancing, Apr. 18-19, 2012)
Coll. « Procedia CIRP », vol. 10.
pp. 105-111.
Abenhaim, Gad N., Tahan, S. Antoine, Desrochers, Alain et Lalonde, Jean-Francois.
2013.
« Aerospace panels fixtureless inspection methods with restraining force requirements; A technology review ».
In SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013)
Coll. « SAE Technical Papers »
Warrendale, PA, USA : SAE International.
Aidibe, Ali et Tahan, Antoine.
2013.
« Curvature estimation for metrology of non-rigid parts ».
In ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013)
New York, N.Y., USA : American Society of Mechanical Engineers.
Aidibe, Ali, Tahan, S. Antoine et Lalonde, Jean-Francois.
2013.
« A robust iterative displacement inspection algorithm for quality control of aerospace non-rigid parts without conformation jig ».
In SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013)
Coll. « SAE Technical Papers »
Warrendale, PA, USA : SAE International.
Aidibe, Ali et Tahan, S.-Antoine.
2013.
« An inspection approach for nonrigid mechanical parts ».
In Manufacturing Science and Technology (ICMST2013) (Dubai, United Arab Emirates, Aug. 3-4, 2013)
Coll. « Advanced Materials Research », vol. 816-817.
pp. 806-811.
Zurich-Durnten, Switzerland : Trans Tech Publications Ltd.
Anderson, Melissa, Gholipour, Javad, Bridier, Florent, Bocher, Philippe, Jahazi, Mohammad, Savoie, Jean et Wanjara, Priti.
2013.
« Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 37, nº 1.
pp. 39-52.
Asadi, Mahyar, Guillot, Dominic, Weck, Arnaud, Koul, Ashok K., Chamanfar, Ahmad et Jahazi, Mohammad.
2013.
« Constructing a validated deformation mechanism map using low temperature creep strain accommodation processes for waspaloy (A nickel-based superalloy) ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013)
New York, NY, USA : American Society of Mechanical Engineers.
Bensalah, M., Chamanfar, A., Chentouf, S. et Jahazi, M..
2013.
« The influence of thermomechanical processing on prior austenite grain size in medium carbon low alloy steels ».
In Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) (Montreal, QC, Canada, Oct. 27-31, 2013)
Curran.
Boutana, N., Bocher, P. et Jahazi, M..
2013.
« Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata ».
International Journal of Fatigue, vol. 51.
pp. 49-56.
Brière-Côté, Antoine, Rivest, Louis et Maranzana, Roland.
2013.
« 3D CAD model comparison: An evaluation of model difference identification technologies ».
Computer-Aided Design and Applications, vol. 10, nº 2.
pp. 173-195.
Bui, Quang Hien, Pham, Xuan Tan et Fafard, Mario.
2013.
« Modelling of microstructure effects on the mechanical behavior of aluminium tubes drawn with different reduction areas ».
International Journal of Plasticity, vol. 50.
pp. 127-145.
Chamanfar, A., Sarrat, L., Jahazi, M., Asadi, M., Weck, A. et Koul, A. K..
2013.
« Microstructural characteristics of forged and heat treated Inconel-718 disks ».
Materials and Design, vol. 52.
pp. 791-800.
Chamanfar, Ahmad, Jahazi, Mohammad, Gholipour, Javad, Wanjara, Priti et Yue, Stephen.
2013.
« Modeling grain size and strain rate in linear friction welded Waspaloy ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 44, nº 9.
pp. 4230-4238.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2013.
« Review of phenotypic diversity formulations for diagnostic tool ».
Applied Soft Computing, vol. 13, nº 1.
pp. 9-26.
Coulon, P., Dubé, M. et Chatelain, J-F..
2013.
« Effect of vacuum pressure during curing of carbon fibre laminates on their machinability ».
In Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 29-Aug. 2, 2013)
Danouj, B., Tahan, S.-Antoine et David, Éric.
2013.
« Using a new generation of piezoelectric sensors for partial discharge detection ».
Measurement, vol. 46, nº 1.
pp. 660-666.
Djebara, A., Bahloul, A. et Songmene, V..
2013.
« Émission et dispersion de particules lors de l'usinage à sec d'alliages d'aluminium ».
In Proceedings of the 12th International Aluminum Conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)
Djebara, A., Jomaa, W., Bahloul, A. et Songmene, V..
2013.
« Dust emission during dry machining of aeronautic aluminum alloys ».
In Proceedings of 1st International Conference on Aeronautics Sciences (ICAS) (Oran, Algeria, May 27-28, 2013)
ICAS.
Djebara, A. et Songmene, Victor.
2013.
« Dry machining of aluminum alloys and air quality ».
In Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012)
pp. 135-139.
Springer Science and Business Media, LLC.
Djebara, A., Zedan, Y., Kouam, Jules et Songmene, Victor.
2013.
« The effect of the heat treatment on the dust emission during machining of an Al-7Si-Mg cast alloys ».
Journal of Materials Engineering and Performance, vol. 22, nº 12.
pp. 3840-3853.
Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2013.
« Effects of machining conditions on specific surface of PM2.5 emitted during metal cutting ».
Health, vol. 5, nº 10A2.
pp. 36-43.
Gagnon, M., Tahan, Antoine, Bocher, Philippe et Thibault, D..
2013.
« On the fatigue reliability of hydroelectric Francis runners ».
In 5th International Conference on Fatigue Design, Fatigue Design 2013 (Senlis, France, Nov. 27-28, 2013)
Coll. « Procedia Engineering », vol. 66.
pp. 565-574.
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2013.
« A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner ».
International Journal of Fatigue, vol. 47.
pp. 300-307.
Gendron, Mathieu, Boudreault, Eric, Hazel, Bruce, Champliaud, Henri et Pham, Tan.
2013.
« Temperature profile optimization in a new robotic local induction heat treatment process ».
In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013)
pp. 766-773.
Warrendale, PA, USA : Association for Iron and Steel Technology.
Ghafarizadeh, S. B., Chatelain, J. F. et Lebrun, G..
2013.
« Multi axis machining of high performance CFRP for aerospace industry ».
In 19th International Conference on Composite Materials (ICCM 2013) (Montreal, QC, Canada, July 28 - Aug. 02, 2013)
pp. 4027-4034.
International Committee on Composite Materials.
Hamedanianpour, Hossein et Chatelain, Jean-François.
2013.
« Effect of tool wear on quality of carbon fiber reinforced polymer laminate during edge trimming ».
In Manufacturing Engineering and Process II (Vancouver, B.C., Canada, Apr. 13-14, 2013)
Coll. « Applied Mechanics and Materials », vol. 325-326.
pp. 34-39.
Zurich-Durnten, Switzerland : Trans Tech Publications Ltd.
Jalilian, F., Jahazi, M. et Drew, R. A. L..
2013.
« Microstructure evolution during transient liquid phase bonding of alloy 617 ».
Metallography, Microstructure, and Analysis, vol. 2, nº 3.
pp. 170-182.
Jomaa, W., Songmene, Victor et Bocher, Philippe.
2013.
« On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel ».
In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013)
pp. 94-103.
Warrendale, PA, USA : Association for Iron and Steel Technology.
Kamguem, R., Djebara, A. et Songmene, Victor.
2013.
« Investigation on surface finish and metallic particle emission during machining of aluminum alloys using response surface methodology and desirability functions ».
International Journal of Advanced Manufacturing Technology, vol. 69, nº 5-8.
pp. 1283-1298.
Kamguem, Rene, Tahan, Souheil Antoine et Songmene, Victor.
2013.
« Evaluation of machined part surface roughness using image texture gradient factor ».
International Journal of Precision Engineering and Manufacturing, vol. 14, nº 2.
pp. 183-190.
Kedadouche, Mourad, Kidar, Thameur, Thomas, Marc, Tahan, Antoine, El Badaoui, Mohamed et Guilbault, Raynald.
2013.
« Combining EMD and Lempel-Ziv complexity for early detection of gear cracks ».
In Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013)
Chartres, France : Institute of Technology.
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2013.
« Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ».
In CIRI 2013, 3ème Congrès International sur l’Ingénierie des Risques Industriels (Reims, France, July 3-5, 2013)
Reims, France : Université de Reims Champagne-Ardenne.
Khettabi, R., Fatmi, L., Masounave, Jacques et Songmene, Victor.
2013.
« On the micro and nanoparticle emission during machining of titanium and aluminum alloys ».
CIRP Journal of Manufacturing Science and Technology, vol. 6, nº 3.
pp. 175-180.
Kouam, Jules, Songmene, Victor et Bahloul, Ali.
2013.
« Experimental investigation on PM2.5 particle emission during polishing of granite ».
Health, vol. 5, nº 10A2.
pp. 29-35.
Kouam, Jules, Songmene, Victor, Zedan, Yasser, Djebara, AbdelHakim et Khettabi, Riad.
2013.
« On chip formation during drilling of cast aluminum alloys ».
Machining Science and Technology, vol. 17, nº 2.
pp. 228-245.
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir.
2013.
« Analytical modelling and control of a hybrid manufacturing/remanufacturing system ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 46, nº 9.
pp. 401-406.
Kouwonou, K., Pham, X. T. et Lebrun, G..
2013.
« Modeling and characterization of thermoplastic composites peek/carbon ».
In Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 28-Aug. 2, 2013)
Lessard, Hugues, Lebrun, Gilbert et Pham, Xuan-Tan.
2013.
« Experimental evaluation of the thermo-stamping process for a 3d composite part made of unidirectional cf/peek prepregs ».
In 45th ISTC (Wichita, KS, USA, Oct. 21-24, 2013)
SAMPE.
Levasseur, Annie, Ménard, Jérémie, Songmene, Victor, Fernandes, Julio et Petit, Yvan.
2013.
« Quality of reamed surface using serrated blades as compared to a convential acetabular reamer ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (San Diego, CA, USA, Nov. 15-21, 2013)
ASME.
American Society of Mechanical Engineers (ASME).
Maldar, A. R., Ebrahimi, G. R., Haghshenas, Meysam, Jahazi, M. et Bocher, P..
2013.
« Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps ».
Journal of Materials Engineering and Performance, vol. 22, nº 11.
pp. 3306-3314.
Nadeau, Sylvie, Bouchard, Michèle, Debia, Maximilien, DeMarcellis-Warin, Nathalie, Hallé, Stéphane, Songmene, Victor, Therrien, Marie-Christine, Wilkinson, Kevin, Ateme-Nguema, Barthelemy, Dufour, Genevieve, Dufresne, André, Fatisson, Julien, Haddad, Sami, Hadioui, Madjid, Kouam, Jules, Morency, François, Tardif, Robert, Viens, Martin, Weichenthal, Scott, Viau, Claude et Camus, Michel.
2013.
« EquiNanos: innovative team for nanoparticle risk management ».
Nanomedicine : Nanotechnology, Biology and Medicine, vol. 9, nº 1.
pp. 22-24.
Niknam, S. A. et Songmene, V..
2013.
« Deburring and edge finishing of aluminum alloys : a review ».
In Proceedings of the 12th International Aluminum conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)
Niknam, S. A. et Songmene, Victor.
2013.
« Modeling of burr thickness in milling of ductile materials ».
International Journal of Advanced Manufacturing Technology, vol. 66, nº 9-12.
pp. 2029-2039.
Niknam, S. A., Songmene, Victor et Au, Y. H. J..
2013.
« The use of acoustic emission information to distinguish between dry and lubricated rolling element bearings in low-speed rotating machines ».
International Journal of Advanced Manufacturing Technology, vol. 69, nº 9-12.
pp. 2679-2689.
Niknam, Seyed Ali et Songmene, Victor.
2013.
« Experimental investigation and modeling of milling burrs ».
In ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013)
New York, N.Y., USA : American Society of Mechanical Engineers.
Niknam, Seyed Ali et Songmene, Victor.
2013.
« Factors governing burr formation during high-speed slot milling of wrought aluminum alloys ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, nº 8.
pp. 1165-1179.
Niknam, Seyed Ali et Songmene, Victor.
2013.
« Simultaneous optimization of burrs size and surface finish when milling 6061-T6 aluminium alloy ».
International Journal of Precision Engineering and Manufacturing, vol. 14, nº 8.
pp. 1311-1320.
Niknam, Seyed Ali, Songmene, Victor et Au, Y. H. Joe.
2013.
« Proposing a new acoustic emission parameter for bearing condition monitoring in rotating machines ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 37, nº 4.
pp. 1105-1114. Petit, Yvan, Fernandes, Julio, Mérette, Jean-Sébastien, Dansereau, Mathieu, Songmene, Victor et Carrier, Mathieu (inventeurs) 4 juin 2013. « Acetabular reamer ». Brevet américain US 8,454,609.
Pham, Tan, Pradinc, G., Cao, X. et Fihey, J. L..
2013.
« Modeling of moving heat sources using meshless element free galerkin method ».
In ASM Proceedings of the International Conference: Trends in Welding Research (Chicago, IL, USA, June 4-8, 2012)
pp. 746-751.
OH, USA : ASM International. Pham, Xuan-Tan. 2013. « Analyse thermique de Rosenthal par la méthode meshless element free Galerkin ». Communication lors de la conférence : Séminaire "Modélisation avancée des cuves d'électrolyse et efficacité énergétique'' de la Chaire de recherche industrielle CRSNG/Alcoa sur la modélisation avancée des cuves d'électrolyse et l'efficacité énergétique, Université Laval (Québec, QC, Canada, 16 mai 2013). Pham, Xuan-Tan. 2013. « Simulation numérique du soudage par éléments finis avec Sysweld ». Communication lors de la conférence : Symposoud 2013. Ensembles soudés: de la conception à la fabrication (Varennes, QC, Canada, 30-31 mai 2013).
Pham, Xuan-Tan.
2013.
« Two-dimensional rosenthal moving heat source analysis using the meshless element free Galerkin method ».
Numerical Heat Transfer; Part A: Applications, vol. 63, nº 11.
pp. 807-823. Pradinc, G., Pham, X-T., Cao, X., Fihey, J-L. et Mathieu, L.. 2013. « An experimentally assisted numerical simulation of metal forming for thick and heavy plates by line heating ». Communication lors de la conférence : Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) (Montreal, QC, Canada, Oct. 27-31, 2013).
Radvar-Esfahlan, H. et Tahan, S.-Antoine.
2013.
« Performance study of dimensionality reduction methods for metrology of nonrigid mechanical parts ».
International Journal of Metrology and Quality Engineering, vol. 4, nº 3.
pp. 193-200.
Sabri, V., Tahan, S.-Antoine, Pham, X. T., Radvar-Esfahlan, H., Louhichi, B. et Tahvilian, A. M..
2013.
« Fixtureless profile inspection of non-rigid parts ».
In Proceedings of International Conference on Computers and Industrial Engineering, CIE (Hong Kong, China, Oct. 16-18, 2013)
pp. 86-97.
Curran Associates Inc..
Sauvé, Jérémie, Dubé, Martine, Corriveau, Guillaume et Dervault, Frank.
2013.
« Exact buckling solution of composite web/flange assembly ».
In Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 29-Aug. 2, 2013)
pp. 4637-4644.
Segonds, Stephane, Masounave, Jacques, Songmene, Victor et Bes, Christian.
2013.
« A simple analytical model for burr type prediction in drilling of ductile materials ».
Journal of Materials Processing Technology, vol. 213, nº 6.
pp. 971-977.
Shahriari, D., Zolfaghari, A., Jahazi, Mohammad et Bocher, Philippe.
2013.
« Development of an expert system to characterize weld defects identified by ultrasonic testing ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013)
New York, NY, USA : American Society of Mechanical Engineers.
Songmene, Victor, Njoya, R. D. et Nkengue, B. T..
2013.
« Machining performance of a graphitic SiC-aluminium matrix composite ».
In Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012)
pp. 127-130.
Springer Science and Business Media, LLC.
Talbot, Edith, Hubert, Pascal, Dubé, Martine et Yousefpour, Ali.
2013.
« Optimization of thermoplastic composites resistance welding parameters based on transient heat transfer finite element modeling ».
Journal of Thermoplastic Composite Materials, vol. 26, nº 5.
pp. 699-717.
Xu, Baoguang, Xie, W. F., Viens, Martin, Mohseni, Ehsan, Birglen, Lionel et Mantegh, Iraj.
2013.
« Intelligent eddy current crack detection system design based on neuro-fuzzy logic ».
In Proceedings of the The NDT in Canada 2013 Conference in conjunction with the International Workshop on Smart Materials & Structures, SHM and NDT for the Energy Industry (Calgary, AB, Canada, Oct. 7-10, 2013)
Zaghbani, Imed, Songmene, Victor et Bonev, Ilian.
2013.
« An experimental study on the vibration response of a robotic machining system ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, nº 6.
pp. 866-880.
Zedan, Y., Songmene, Victor, Khettabi, R., Kouam, J. et Masounave, Jacques.
2013.
« Surface integrity of Al6061-T6 drilled in wet, semi-wet and dry conditions ».
In Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012)
pp. 131-134.
Springer Science and Business Media, LLC.
Zedan, Yasser, Songmene, Victor, Kouam, Jules et Masounave, Jacques.
2013.
« Effects of lubrication modes on part quality during drilling 6061-T6 aluminium alloy ».
International Journal of Machining and Machinability of Materials, vol. 13, nº 2-3.
pp. 231-252. 2012
Abenhaim, Gad Noriel, Desrochers, Alain et Tahan, Antoine.
2012.
« Nonrigid parts' specification and inspection methods: notions, challenges, and recent advancements ».
International Journal of Advanced Manufacturing Technology, vol. 63, nº 5-8.
pp. 741-752.
Aidibe, Ali, Tahan, Antoine S. et Abenhaim, Gad N..
2012.
« Distinguishing profile deviations from a part's deformation using the maximum normed residual test ».
WSEAS Transactions on Applied and Theoretical Mechanics, vol. 7, nº 1.
pp. 18-28.
Anderson, Melissa, Bocher, Philippe, Gholipour, Javad, Jahazi, Mohammad, Savoie, Jean et Wanjara, Priti.
2012.
« Increasing the hydroformability of stainless steel 321 by multistep processing ».
In Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012)
Coll. « Steel Research International »
pp. 1243-1246.
Krakow, Poland : Wiley-VCH Verlag.
Arpin-Pont, J., Gagnon, M., Tahan, Antoine, Coutu, A. et Thibault, D..
2012.
« Strain gauge measurement uncertainties on hydraulic turbine runner blade ».
In 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 15.
UK : IOP Publishing Ltd..
Balazinski, M., Songmene, V. et Kishawy, H. A..
2012.
« Analyzing the machinability of metal matrix composites ».
In
Machining Technology for Composite Materials.
Coll. « Composites Science and Engineering ».
pp. 394-411. Woodhead Publishing.
Bricogne, Matthieu, Rivest, Louis, Troussier, Nadege et Eynard, Benoit.
2012.
« Towards PLM for mechatronics system design using concurrent software versioning principles ».
In Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012)
Coll. « IFIP Advances in Information and Communication Technology », vol. 388.
pp. 339-348.
New York, NY : Springer New York.
Brière-Côté, Antoine, Rivest, Louis et Maranzana, Roland.
2012.
« Comparing 3D CAD models: Uses, methods, tools and perspectives ».
Computer-Aided Design and Applications, vol. 9, nº 6.
pp. 771-794.
Brière-Côté, Antoine, Rivest, Louis et Maranzana, Roland.
2012.
« Integration of explicit geometric constraints in the comparison of 3D CAD models for part design reuse ».
In Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012)
Coll. « IFIP Advances in Information and Communication Technology », vol. 388.
pp. 445-457.
New York, NY : Springer New York.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2012.
« Maximizing the integrity of linear friction welded Waspaloy ».
Materials Science and Engineering A, vol. 555.
pp. 117-130.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2012.
« Suppressed liquation and microcracking in linear friction welded WASPALOY ».
Materials and Design, vol. 36.
pp. 113-122.
Chatelain, Jean-François.
2012.
« A university-industry research collaboration for the optimization of the machining process of multilayer materials for the aerospace industry ».
Journal of Management and Engineering Integration, vol. 5, nº 1.
pp. 23-33.
Chatelain, Jean-François, Lalonde, Jean-François et Tahan, Antoine S..
2012.
« Effect of Residual Stresses Embedded within Workpieces on the Distortion of Parts after Machining ».
International Journal of Mechanics, vol. 6, nº 1.
pp. 43-51.
Chatelain, Jean-François et Zaghbani, Imed.
2012.
« A Comparison of Special Helical Cutter Geometries Based on Cutting Forces for the Trimming of CFRP Laminates ».
International Journal of Mechanics, vol. 6, nº 1.
pp. 52-59.
Chatelain, Jean-François, Zaghbani, Imed et Monier, Joseph.
2012.
« Effect of Ply Orientation on Roughness for the Trimming Process of CFRP Laminates ».
World Academy of Science, Engineering & Technology, vol. 6, nº 8.
pp. 988-994.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2012.
« Review and study of genotypic diversity measures for real-coded representations ».
IEEE Transactions on Evolutionary Computation, vol. 16, nº 5.
pp. 695-710.
Djebara, A., Songmene, V., Kouam, J. et Khettabi, R..
2012.
« An experimental investigation on dust emission during milling process using statistical analysis ».
International Journal of Advances in Machining and Forming Operations, vol. 4, nº 1.
pp. 15-37.
Dubé, Martine, Hubert, Pascal, Gallet, Jan N. A. H., Stavrov, Darko, Bersee, Harald E. N. et Yousefpour, Ali.
2012.
« Metal mesh heating element size effect in resistance welding of thermoplastic composites ».
Journal of Composite Materials, vol. 46, nº 8.
pp. 911-919.
El Hani, M. A., Rivest, Louis et Maranzana, Roland.
2012.
« Product data reuse in product development: A practitioner's perspective ».
In Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012)
Coll. « IFIP Advances in Information and Communication Technology », vol. 388.
pp. 243-256.
New York, NY : Springer New York.
Gagnon, M., Tahan, Antoine, Bocher, Philippe et Thibault, D..
2012.
« The role of high cycle fatigue (HCF) onset in Francis runner reliability ».
In 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012)
Coll. « IOP Conference Series: Earth and Environmental Science », vol. 15.
UK : IOP Publishing Ltd..
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2012.
« On the stochastic simulation of hydroelectric turbine blades transient response ».
Mechanical Systems and Signal Processing, vol. 32.
pp. 178-187.
Jomaa, W., Fredj, N. Ben, Songemene, Victor, Zaghbani, I. et Braham, C..
2012.
« Hybrid machining versus hard turning-investigation on process induced residual stresses ».
In 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, May 28-June 01, 2012)
Kamguem, R., Wenga, B., Tahan, Antoine et Songmene, V.. 2012. « Non-contact optical inspection of machined parts surface roughness ». Communication lors de la conférence : International Conference on Virtual Machining Process Technology (VMPT) (Montreal, QC, Canada, May 28-June 1, 2012).
Kamguem, René, Songmene, Victor, Kenné, Jean-Pierre et Tahan, Souheil Antoine.
2012.
« Vision-based surface roughness inspection of machined aluminium parts ».
International Journal of Machining and Machinability of Materials, vol. 12, nº 3.
pp. 215-235.
Kamguem, René, Tahan, Antoine, Wenga, Bernard et Songmene, Victor.
2012.
« Non-contact Optical inspection of machined parts Surface Roughness ».
In 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, Canada, 28 mai au 1er juin 2012)
Kedadouche, M., Thomas, Marc et Tahan, Antoine.
2012.
« Monitoring bearings by acoustic emission: a comparative study with vibration techniques for early detection ».
In 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012)
The Canadian Machinery Vibration Association.
Kouam, J., Songmene, V., Balazinski, M. et Hendrick, P..
2012.
« Dry, semi-dry and wet machining of 6061-T6 aluminium alloy ».
In
Aluminium Alloys - New Trends in Fabrication and Applications.
pp. 199-222. Rijeka : InTech.
Kouam, J., Songmene, V., Djebara, A. et Khettabi, R..
2012.
« Effect of friction testing of metals on particle emission ».
Journal of Materials Engineering and Performance, vol. 21, nº 6.
pp. 965-972.
Kouam, Jules, Zaghbani, Imed, Songmene, Victor, Parson, Nick et Maltais, Alexandre.
2012.
« Factors affecting the machinability of Al-Mg-Si extrusions ».
In Proceedings of the 10th International Aluminum Extrusion Technology Conference (ET '12) (Miami, FL, USA, May 15-18, 2012)
Extrusion Technology for Aluminum Profiles Foundation.
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre et Songmene, Victor.
2012.
« A stochastic model for controlling the deterioration of a two machines production system: Extensions to remanufacturing ».
In 25th European Conference on Operational Research (EURO 2012) (Vilnius, Lituanie, July 08-11, 2012)
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre et Songmene, Victor.
2012.
« The study of a deteriorating manufacturing system using simulation and response methodology ».
In 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept. 19-21, 2012)
pp. 80-89.
Italy : DIPTEM.
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Delax, Pierre et Songmene, Victor.
2012.
« Production planning of a two-machine manufacturing system with production dependent failure rates ».
In International Conference on Information Systems, Logistics and Supply Chain (ILS) (Québec, QC, Canada, Aug. 26-29, 2012)
Louhichi, B., Bruneau, M. et Rivest, Louis. 2012. « Transposition des associations et propagation des changements dans une maquette numérique ». Communication lors de la conférence : Deuxième Congrès Tunisien de Mécanique (COTUME) (Sousse, Tunisie, 19-21 mars 2012).
Louhichi, Borhen et Rivest, Louis.
2012.
« Management of associations within digital mock-ups for improved collaboration ».
In Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012)
Coll. « IFIP Advances in Information and Communication Technology », vol. 388.
pp. 411-423.
New York, NY : Springer New York.
Niknam, Seyed Ali, Kamguem, Rene et Songmene, Victor.
2012.
« Analysis and optimization of exit burr size and surface roughness in milling using desirability function ».
In ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012)
pp. 1797-1806.
New York, N.Y., USA : American Society of Mechanical Engineers.
Niknam, Seyed Ali et Songmene, Victor.
2012.
« Statistical investigation on burrs thickness during milling of 6061-T6 aluminium alloy ».
In 1st International Conference on Virtual Machining Process Technology (Montréal, QC, Canada, 28 May-01 June, 2012)
Niknam, Seyed Ali, Zedan, Yasser et Songmene, Victor.
2012.
« Burr formation during milling of wrought aluminum alloys ».
In 20th Annual Conference of Mechanical Engineering (ISME) (Shiraz, Iran, May 15-17, 2012)
Poirier, M., Tahan, Antoine, Gagnon, M. et Coutu, A..
2012.
« Extrapolation des signaux de chargement mesurés sur des aubes de turbine hydroélectrique de type Francis ».
In 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012)
The Canadian Machinery Vibration Association.
Quintana, V., Rivest, L., Pellerin, R. et Kheddouci, F..
2012.
« Re-engineering the engineering change management process for a drawing-less environment ».
Computers in Industry, vol. 63, nº 1.
pp. 79-90.
Quintana, Virgilio, Rivest, Louis et Pellerin, Robert.
2012.
« Measuring and improving the process of engineering change orders in a model–based definition context ».
International Journal of Product Lifecycle Management, vol. 6, nº 2.
pp. 138-160.
Radvar-Esfahlan, Hassan et Tahan, Souheil-Antoine.
2012.
« Nonrigid geometric metrology using generalized numerical inspection fixtures ».
Precision Engineering, vol. 36, nº 1.
pp. 1-9.
Rivest, Louis, Bouras, Abdelaziz et Louhichi, Borhen.
2012.
« IFIP Advances in Information and Communication Technology: Preface ».
In Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012)
Coll. « IFIP Advances in Information and Communication Technology », vol. 388.
VI-VI.
New York, NY : Springer New York. Sarrat, L., Chamanfar, A. et Jahazi, Mohammad. 2012. « Microstructure evolution of Ni base superalloys during thermomechanical processing ». Communication lors de la conférence : Research and Innovation for Transport Systems of the Future (Paris, France, Nov. 12-15, 2012).
Shahriari, Davood, Heidari, Iman, Kim, Kitae et Jahazi, Mohammad.
2012.
« Welding temperature distribution in low carbon steel sheets by FDM and FEM ».
In Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012)
Coll. « Steel Research International »
pp. 607-610.
Krakow, Poland : Wiley-VCH Verlag.
Songmene, V., Kouam, J., Zaghbani, I., Parson, N. et Maltais, A..
2012.
« Global machinability of Al-Mg-Si extrusions ».
In
Aluminium Alloys - New Trends in Fabrication and Applications.
pp. 223-251. Rijeka : InTech.
Songmene, Victor, Khettabi, Riad et Kouam, Jules.
2012.
« Dry high-speed machining: A cost effective and green process ».
International Journal of Manufacturing Research, vol. 7, nº 3.
pp. 229-256.
St-Pierre, Benoit, Chatelain, Jean-François et Dufresne, Louis.
2012.
« Développement d’un modèle semi-empirique pour la prédiction de la cohérence d’un jet utilisé dans les procédés de rectification ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 36, nº 2.
pp. 127-142.
Tahan, A. S. et Cauvier, J..
2012.
« Capability estimation of geometrical tolerance with a material modifier by a Hasofer-Lind index ».
Journal of Manufacturing Science and Engineering, vol. 134, nº 2.
Tahan, Antoine.
2012.
« Conception et assemblage, un mariage de raison ! ».
L’Atout, nº novembre.
pp. 16-18.
Tamadon, Abbas, Shokuhfar, Ali, Yoozbashizadeh, Hossein et Jahazi, Mohammad.
2012.
« The role of carbon nanotubes in synthesis of TaC nanoparticles by gas – solid reaction ».
Advanced Processes in Materials, vol. 6, nº 3 (22).
pp. 1-7.
Thomas, Marc, Tahan, Antoine et Kedadouche, M..
2012.
« Comparison of acoustic emission and vibration measurements for early detection of bearing damages ».
In Research and Innovation for Transport Systems of the Future (RITF) (Paris, France, Nov. 15, 2012)
Wenga Ntcheping, B., Kamguem, R., Kouam, J. et Songmene, V..
2012.
« Numerical study and simulation in COMSOL multiphysics of the dilution process during Dust's sampling in dry machining ».
In COMSOL Conference 2012 (Boston, MA, USA, Oct. 03-05, 2012)
COMSOL. Wenga, B., Djebara, A., Kamguem, R., Kouam, J. et Songmene, V.. 2012. « Diluteur approprié pour la mesure des concentrations élevées en poussières fines et ultrafines au cours de l'usinage à sec ». Affiche présentée lors de la conférence : 17e Colloque international en évaluation environnementale (Montréal, QC, Canada, 12-15 juin 2012).
Zaghbani, Imed, Chatelain, Jean-Fraçois, Songmene, Victor, Bérubé, Sébastien et Atarsia, Abdelatif.
2012.
« A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates ».
Journal of Composite Materials, vol. 46, nº 16.
pp. 1955-1971.
Zaghbani, Imed, Chatelain, Jean-François, Bérubé, Sébastien, Songmene, Victor et Lance, Justin.
2012.
« Analysis and modelling of cutting forces during the trimming of unidirectional CFRP composite laminates ».
International Journal of Machining and Machinability of Materials, vol. 12, nº 4.
pp. 337-357.
Zaghbani, Imed, Jomaa, Walid, Songmene, Victor, L. Boire, Louis-Philippe et Lehuy, Hoang.
2012.
« Investigation on tool wear during dry and wet machining of hardened mould steels ».
International journal of civil engineering and building materials, vol. 2, nº 3.
pp. 124-131.
Zamani, S., Razavizadeh, H. et Jahazi, Mohammad.
2012.
« Microstructure and hardness control of a binary -TiAl alloy by heat treatment ».
In 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012)
pp. 169-178.
Applied Physics and Material Science (APMAS).
Zamani, S., Razavizadeh, H. et Jahazi, Mohammad.
2012.
« The influence of heat-treatment cycles on pressure strength of a binary-TiAl alloy ».
In 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012)
pp. 158-168.
Applied Physics and Material Science (APMAS).
Zedan, Y., Djebara, A., Songmene, Victor et Niknam, S. A..
2012.
« Burr size minimization when drilling 6061-t6 aluminum alloy ».
In ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012)
pp. 1053-1059.
New York, N.Y., USA : American Society of Mechanical Engineers.
Zedan, Yasser, Khettabi, Riad, Zaghbani, Imed, Kouam, Jules, Masounave, Jacques et Songmene, Victor.
2012.
« Experimental investigation of cutting fluid influence on drilled aluminum part quality ».
International journal of civil engineering and building materials, vol. 2, nº 2.
pp. 78-84. 2011
Abenhaim, Gad N., Tahan, Antoine, Desrochers, Alain et Maranzana, Roland.
2011.
« A novel approach for the inspection of flexible parts without the use of special fixtures ».
Journal of Manufacturing Science and Engineering, vol. 133, nº 1.
Aguilar-Zambrano, Jose Javier et Gardoni, Mickaël.
2011.
« An information system to support problems definition based on technological frames and organisational routines ».
International Journal of Manufacturing Technology and Management, vol. 22, nº 3.
pp. 219-232.
Aidibe, A., Tahan, Antoine et Abenhaim, G. N..
2011.
« Dimensioning control of non-rigid parts using the Iterative Displacement Inspection with the maximum normed residual test ».
In 2nd International Conference on Fluid Mechanics and Heat and Mass Transfer (FLUIDSHEAT'11), 2nd International Conference on Theoretical and Applied Mechanics (TAM'11), 4th WSEAS International Conference on UPT'11 (CUHT'11) (Corfu Island, Greece, July 15-17, 2011)
pp. 13-18.
Corfu Island, Greece : World Scientific and Engineering Academy and Society.
Arrieta, Carlos, David, Éric, Dolez, Patricia et Vu-Khanh, Toan.
2011.
« Hydrolytic and photochemical aging studies of a Kevlar-PBI blend ».
Polymer Degradation and Stability, vol. 96, nº 8.
pp. 1411-1419.
Arrieta, Carlos, David, Éric, Dolez, Patricia et Vu-Khanh, Toan.
2011.
« X-ray diffraction, Raman, and differential thermal analyses of the thermal aging of a Kevlar-PBI blend fabric ».
Polymer Composites, vol. 32, nº 3.
pp. 362-367. Beaulieu, N. et Tahan, Antoine. 2011. « Le portrait du lean manufacturing au Québec : sondage 2012 ». Communication lors de la conférence : Forum TI-PME 2011 (Montréal, QC, Canada, 20 avril 2011).
Beaulieu, Nicolas B. et Tahan, Antoine.
2011.
« Lean manufacturing au Québec : portrait 2010 ».
Montréal, Québec, Canada : Manufacturiers et Exportateurs au Québec. 45 p.
Brailovski, Vladimir, Prokoshkin, S. D., Inaekyan, K. E. et Demers, V..
2011.
« Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ».
Journal of Alloys and Compounds, vol. 509, nº 5.
pp. 2066-2075.
Brière-Côté, Antoine, Rivest, Louis et Maranzana, Roland.
2011.
« Three-step approach for structuring 3D CAD model comparison scenarios ».
In Product Lifecycle Management : Virtual Product Lifecycles for Green Products and Services : Proceedings of the PLM11 conference held at the Eindhoven (Eindhoven, The Netherlands, July 11-13, 2011)
pp. 429-443.
IFIP Working Group 5.1.
Bui, Q. H. et Pham, Tan.
2011.
« Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing ».
International Journal of Mechanical Sciences, vol. 53, nº 10.
pp. 812-826.
Bui, Q. H., Pham, Tan et Fafard, M..
2011.
« A self-consistent model predicting the mechanical behavior of cold-draw 6063 aluminium tubes ».
In COM 2011 : Conference of Metallurgists (Montreal, Canada, Oct. 2-5, 2011)
Cao, X. et Jahazi, M..
2011.
« Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy ».
Materials and Design, vol. 32, nº 1.
pp. 1-11.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2011.
« Mechanical property and microstructure of linear friction welded WASPALOY ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 42, nº 3.
pp. 729-744.
Chatelain, Jean-François, Lalonde, J. F. et Tahan, Antoine.
2011.
« A comparison of the distortion of machined parts resulting from residual stresses within workpieces ».
In 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011)
pp. 79-84.
World Scientific and Engineering Academy and Society.
Chatelain, Jean-François et Zaghbani, Imed.
2011.
« Effect of tool geometry special features on cutting forces of multilayered CFRP laminates ».
In 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011)
pp. 85-90.
World Scientific and Engineering Academy and Society.
Dalgaard, E., Wanjara, P., Trigo, G., Jahazi, M., Comeau, G. et Jonas, J. J..
2011.
« Linear friction welding of Al-Cu Part 2 - interfacial characteristics ».
Canadian Metallurgical Quarterly, vol. 50, nº 4.
pp. 360-370.
Demoly, Frédéric, Yan, Xiu-Tian, Eynard, Benoît, Rivest, Louis et Gomes, Samuel.
2011.
« An assembly oriented design framework for product structure engineering and assembly sequence planning ».
Robotics and Computer-Integrated Manufacturing, vol. 27, nº 1.
pp. 33-46.
Djebara, A., Khettabi, R., Kouam, J. et Songmene, Victor.
2011.
« Characterization of fine and ultrafine particles produced during dry machnining of aluminum alloys ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011)
pp. 157-170.
Westmount : MetSoc.
Djebara, Abdelhakim, Khettabi, Riad, Kouam, Jules et Songmene, Victor.
2011.
« Comparison of the capability of peak function in describing real condensation particle counter profiles ».
In 2nd International Conference on Laser and Plasma Applications in Materials Science, (LAPAMS) (Algiers, Algeria, Nov. 27-30, 2010)
Coll. « Advanced Materials Research », vol. 227.
pp. 96-100.
Clausthal-Zellerfeld, Germany : Trans Tech Publications.
Jomaa, W., Ben Fredj, N., Zaghbani, I. et Songmene, V..
2011.
« Non-conventional turning of hardened AISI D2 tool steel ».
International Journal of Advances in Machining and Forming Operations, vol. 3, nº 2.
pp. 93-126.
Jouffroy, Denis, Desrochers, Alain et Rivest, Louis.
2011.
« Numerical representation of interface control documents (ICDs) for collaborative engineering ».
In Product Lifecycle Management : Virtual Product Lifecycles for Green Products and Services : Proceedings of the PLM11 conference held at the Eindhoven (Eindhoven, The Netherlands, July 11-13, 2011)
pp. 182-194.
IFIP Working Group 5.1.
Kamguem, René, Songmene, Victor, Kenné, Jean-Pierre et Tahan, Antoine.
2011.
« Surface quality of 7075-T6 aluminum alloy machined using high-speed milling process ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, Canada, Oct. 2-5, 2011)
pp. 495-508.
Westmount : MetSoc.
Khettabi, Riad, Zaghbani, Imed, Djebara, Abdelhakim, Kouam, Jules et Songmene, Victor.
2011.
« A new sustainability model for machining processes ».
International Journal of Business Continuity and Risk Management, vol. 2, nº 3.
pp. 187-202.
Khettabi, Riad, Zedan, Yasser, Masounave, Jacques et Songmene, Victor.
2011.
« On particle emission during machining of titanium and aluminum alloys ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011)
pp. 475-486.
Westmount : MetSoc.
Kouam, Jules, Zedan, Yasser, Djebara, Abdelhakim, Masounave, Jacques et Songmene, Victor.
2011.
« Machinability of A356 and A319 aluminum alloy ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011)
pp. 281-292.
Westmount : MetSoc.
Kouedeu, Annie Francie, Kenné, Jean-Pierre et Songmene, Victor.
2011.
« Production, preventive and corrective maintenance planning in manufacturing systems under imperfect repairs ».
In 3rd International Workshop on Dependable Control of Discrete Systems (DCDS) (Saarbrucken, Germany, June 15-17, 2011)
pp. 59-64.
IEEE.
Lamraoui, M., Thomas, Marc, El Badaoui, M., Zaghbani, I. et Songmene, Victor.
2011.
« New indicators based on cyclostationarity approach for machining monitoring ».
In International Conference Surveillance 6 (Compiègne, France, Oct. 25-26, 2011)
p. 27.
Lamraoui, Mourad, Thomas, Marc, El Badaoui, Mohamed, Zaghbani, Imed et Songmene, Victor.
2011.
« The angular kurtosis and power : new tools for machining monitoring ».
In DINAME : The 14th International Symposium on Dynamic Problems of Mechanics (Sao Paulo, Brazil, Mar. 13-18, 2011)
pp. 494-511.
Sao Sebastiao : ABCM.
Niknam, Seyed Ali, Tiabi, Azziz, Zaghbani, Imed, Kamguem, Rene et Songmene, Victor.
2011.
« Milling burr size estimation using acoustic emission and cutting forces ».
In ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (Denver, CO, United states, Nov. 11-17, 2011)
pp. 901-909.
American Society of Mechanical Engineers. Pelletier, F., Masson, Christian et Tahan, Antoine. 2011. « Running advanced analytics using MATLAB and PI system ». Communication lors de la conférence : OSIsoft user conference (San Francisco, CA, USA, Mar. 28-30, 2011).
Quintana, Virgilio, Rivest, Louis, Pellerin, Robert et Venne, Frederick.
2011.
« Methodology for the implementation of the model-based definition approach ».
Journal of Operations and Logistics, vol. 4, nº 3.
11.1-11.12.
Radvar-Esfahlan, Hassan et Tahan, Antoine.
2011.
« Distance preserving dimensionality reduction methods and their applications in geometric inspection of nonrigid parts ».
In 5th symposium on Advances in Science and Technology (Mashhad, Iran, May 12-17, 2011)
Songmene, Victor, Khettabi, R., Zaghbani, I., Kouam, J. et Djebara, A..
2011.
« Machining and Machinability of Aluminum Alloys ».
In
Aluminium Alloys, Theory and Applications.
pp. 377-400. Rijeka, Croatia : InTech.
St-Martin, Serge, Chatelain, Jean-François, Mayer, René, Engin, Serafettin et Chalut, Stéphane.
2011.
« Prediction of thin wall surface shape through simulation of the machining process for light alloy workpieces ».
Journal of Machining and Forming Technologies, vol. 3, nº 3-4.
pp. 185-202. Tahan, Antoine. 2011. « Exploiter les études de capabilité ». Communication lors de la conférence : 3e Journée de Métrologie en Aérospatiale (Montréal, QC, Canada, 28 avril 2011). Tahan, Antoine. 2011. « La gestion de la qualité : histoire, présent et future ». Communication lors de la conférence : Colloque Annuel de l'Ordre des Ingénieurs du Québec (Montréal, QC, Canada, 12-13 mai 2011).
Tahan, Antoine S. et Levesque, Sylvain.
2011.
« Exploiting the process capability in the statistical estimation of the tolerance of location ».
Mécanique & Industries, vol. 12, nº 6.
pp. 503-512.
Tahan, Antoine, Thibault, Denis, Marcouiller, Luc, Gagnon, Martin et Szczota, Mickael.
2011.
« Modeling operation history of hydroelectric turbines ».
In The HydroVision International Conference (Sacramento, CA, USA, July 19-22, 2011)
Walid, Jomaa, Zaghbani, Imed, Songmene, Victor, Boire, Louis-Philippe L. et LeHuy, Hoang.
2011.
« Dry and wet machinability of hardened mould steels ».
In Proceedings of the International Conference on Environmental Pollution and Remediation (Ottawa, ON, Canada, Aug. 17-19, 2011)
ASET.
Xu, Jing, Houssin, Rémy, Caillaud, Emannuel et Gardoni, Mickaël.
2011.
« Fostering continuous innovation in design with an integrated knowledge management approach ».
Computers in Industry, vol. 62, nº 4.
pp. 423-436.
Zaghbani, I., Chatelain, J.-F., Songmene, V., Bérubé, S. et Atarsia, A..
2011.
« Modeling of cutting forces for multilayered CFRP laminates ».
In 26th Annual Technical Conference of the American Society for Composites : 2nd Joint US-Canada Conference on Composites (Montreal, QC, Canada, Sept. 26-28, 2011)
pp. 1224-1233.
DEStech Publications.
Zaghbani, I., Lamraoui, M., Songmene, V., Thomas, M. et El Badaoui, M..
2011.
« Robotic high speed machining of aluminum alloys ».
In High Speed Machining : The 4th International Conference on High Speed Machining (ICHSM’2010) (Guangzhou, Guangdong, China, Oct. 9-10, 2010)
Coll. « Advanced Materials Research », vol. 188.
pp. 584-589.
Trans Tech Publications.
Zedan, Yasser, Khettabi, Riad, Songmene, Victor et Masounave, Jacques.
2011.
« Effect of lubrication and application modes on drilled aluminum part quality ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011)
pp. 319-330.
Westmount : MetSoc. 2010
Badri, Béchir, Thomas, Marc, Sassi, Sadok, Zaghbani, Imed et Songmene, Victor.
2010.
« Étude du comportement des roulements dans les rotors tournant à haute vitesse ».
Revue Internationale sur l'Ingénierie des Risques Industriels, vol. 3, nº 1.
Bastajib, N., Boutana, N., Bocher, P. et Jahazi, M..
2010.
« Application of cellular automata method to simulate the hot deformation behavior of a dual phase titanium alloy ».
Technische Mechanik, vol. 30, nº 1-3.
Bernier, Simon, Amyot, Normand, David, Éric, Navarrete, Benedicto et Provencher, Hélène.
2010.
« Modeling ramped test results on single stator bars ».
In IEEE International Symposium on Electrical Insulation (ISEI) (San Diego, CA, USA, June 6-9, 2010)
pp. 1-4.
Piscataway, NJ : Institute of Electrical and Electronics Engineers (IEEE).
Bres, Antoine, Monsarrat, Bruno, Dubourg, Laurent, Birglen, Lionel, Perron, Claude, Jahazi, Mohammad et Baron, Luc.
2010.
« Simulation of friction stir welding using industrial robots ».
Industrial Robot, vol. 37, nº 1.
pp. 36-50.
Bricogne, Matthieu, Troussier, Nadège, Rivest, Louis et Eynard, Benoît.
2010.
« PLM perspectives in mechatronic systems design ».
In Advances in Production Management Systems (APMS) (Cernobbio, Lake Como, Italy, Oct. 11-13, 2010)
Brière-Côté, Antoine et Rivest, Louis. 2010. « Vers une nouvelle approche pour la mesure et la représentation des différences entre modèles géométriques. ». Communication lors de la conférence : 4e Édition du Colloque sur les Technologies CAO/FAO au Québec (Sherbrooke, Canada, 19 mai 2010).
Brière-Côté, Antoine, Rivest, Louis et Desrochers, Alain.
2010.
« Adaptive generic product structure modelling for design reuse in engineer-to-order products ».
Computers in Industry, vol. 61, nº 1.
pp. 53-65.
Cao, Xinjin, Debaecker, Guillaume, Jahazi, Mohammad, Marya, Surendar, Cuddy, Jonathan et Birur, Anand.
2010.
« Effect of post-weld heat treatment on Nd: YAG laser welded Ti-6Al-4V alloy quality ».
In THERMEC 2009
Coll. « Materials Science Forum », vol. 638-642.
pp. 3655-3660.
Trans Tech Publications Ltd.
Cao, Xinjin et Jahazi, Mohammad.
2010.
« Friction stir welding of dissimilar AA 2024-T3 to AZ31B-H24 alloys ».
In THERMEC 2009 Supplement (Berlin, Germany
Coll. « Materials Science Forum », vol. 638-642.
pp. 3661-3666.
Berlin, Germany : Trans Tech Publications Ltd.
Castellon, J., Banet, L., Preda, I., Agnel, S., Toureille, A., Fréchette, Michel F., David, Éric et Sami, A..
2010.
« Space charge measurements on polymer nanocomposite HDPE/SiO2 materials ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (West Lafayette, USA, Oct. 17-20, 2010)
pp. 1-4.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers (IEEE).
Corriveau, Guillaume, Guilbault, Raynald et Tahan, Antoine.
2010.
« Genetic algorithms and finite element coupling for mechanical optimization ».
Advances in Engineering Software, vol. 41, nº 3.
pp. 422-426.
Couderc, H., Fréchette, Michel F., Savoie, S. et David, Éric.
2010.
« Nanofiller effect during post-heat treatment of micro-loaded epoxy ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (West Lafayette, USA, Oct. 17-20, 2010)
pp. 1-4.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers (IEEE).
Coulibaly, Amadou, Gardoni, Mickaël, Gaye, Khalifa et Huang, Ying.
2010.
« Recyclability oriented lifecycle design of mechatronic products ».
In ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2010) (Montréal, Québec, Canada, Aug. 15–18, 2010)
pp. 135-143.
New York, NY, USA : American Society of Mechanical Engineers.
Coulibaly, Amadou, Gardoni, Mickaël, Huang, Ying et Gaye, Khalifa.
2010.
« Lifecycle management for the personalization of maintenance documents for complex products ».
In 7th International Product Lifecycle Management Conference (PLM) (Bremen, Germany, July 12-14 2010)
Dalgaard, E., Coghe, F., Rabet, L., Jahazi, M., Wanjara, P. et Jonas, J. J..
2010.
« Texture evolution in linear friction welded Ti-6Al-4V ».
In THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009)
Coll. « Advanced Materials Research », vol. 89-91.
pp. 124-129.
Berlin, Germany : Trans Tech Publications.
David, Éric, Arrieta, Carlos, Dolez, Patricia, Vu-Khanh, Toan, Couderc, H. et Fréchette, Michel F..
2010.
« Dielectric properties of high performance fibers ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (West Lafayette, USA, Oct. 17-20, 2010)
pp. 1-4.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers (IEEE).
Demoly, Frédéric, Gomes, Samuel, Eynard, Benoît et Rivest, Louis.
2010.
« PLM-based approach for Assembly Process Engineering ».
International Journal of Manufacturing Research, vol. 5, nº 4.
pp. 413-428.
Demoly, Frédéric, Monticolo, Davy, Eynard, Benoît, Rivest, Louis et Gomes, Samuel.
2010.
« Multiple viewpoint modelling framework enabling integrated product-process design ».
International Journal on Interactive Design and Manufacturing, vol. 4, nº 4.
pp. 269-280.
Djebara, Abdelhakim, Khettabi, Riad, Kouam, Jules et Songmene, Victor.
2010.
« Experimental investigation on ultrafine particles emission during dry machining using statistical tools ».
In International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)
Djebara, Abdelhakim, Khettabi, Riad, Niknam, Seyed Ali et Songmene, Victor. 2010. « Ultrafine particles sampling during machining of aluminum alloys : application to the nanoparticles metrology ». Communication lors de la conférence : Journée des Étudiants du Centre de Recherche sur l'Aluminium (REGAL) (Laval, Québec, Canada, 26 oct. 2010).
Dubé, Martine, Doquet, Véronique et Constantinescu, Andrei.
2010.
« Multiple cracking of a borosilicate glass due to thermal shock ».
In Fracture of materials and structures from micro to macro scale : 18th European Conference on Fracture ; August 30 - September 03, 2010, Dresden, Germany ; book of abstracts ; [ECF-18] (Dresden, Germany, Aug. 30-Sept. 3, 2010)
Dubé, Martine, Doquet, Véronique, Constantinescu, Andrei, George, Daniel, Rémond, Yves et Ahzi, Saïd.
2010.
« Modeling of thermal shock-induced damage in a borosilicate glass ».
Mechanics of Materials, vol. 42, nº 9.
pp. 863-872.
Dubourg, L., Doran, P., Larose, S., Gharghouri, M. A. et Jahazi, M..
2010.
« Prediction and measurements of thermal residual stresses in AA2024-T3 friction stir welds as a function of welding parameters ».
In THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009)
Coll. « Materials Science Forum », vol. 638-642.
pp. 1215-1220.
Berlin, Germany : Trans Tech Publications Ltd.
Dubourg, L., Merati, A. et Jahazi, M..
2010.
« Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin ».
Materials and Design, vol. 31, nº 7.
pp. 3324-3330.
Fréchette, Michel F., Savoie, S., David, Éric, Couderc, H., Trudeau, M., Veillette, R., Probst, C., Gauvin, R. et Vijh, A..
2010.
« Innovation in materials with an impact on electrical energy applications ».
European Journal of Electrical Engineering = Revue Internationale de Génie Électrique, vol. 13.
pp. 765-784.
Fréchette, Michel F., Vijh, A., Utracki, L., Trudeau, M. L., Sami, A., Laurent, C., Moshuis, P. , Andritsch, T., Kochetov, R., Vaughan, A., David, Éric, Castellon, J., Fabiani, D., Gubanski, S., Kindersberger, J., Reed, C., Krivda, A., Fothergill, J., Dodd, S. , Guastavino, F. et Alamdari, H..
2010.
« Nanodielectrics : A Panacea for solving all electrical insulation problems? ».
In 10th IEEE International Conference on Solid Dielectrics (ICSD) (Postdam, Germany, July 4-9, 2010)
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers (IEEE).
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2010.
« Impact of startup scheme on Francis runner life expectancy ».
In 25th IAHR Symposium on Hydraulic Machinery and Systems (Timişoara, Romania, 20–24 Sept. 2010)
Coll. « IOP Conference Series : Earth and Environmental Science », vol. 12.
012107.
London, UK : Institute of Physics Publishing. Gardoni, Mickaël, Coulibaly, Amadou et Gaye, Khalifa. 2010. « La gestion de fin de vie des produits mécatroniques via une matrice sémantique ». Communication lors de la conférence : 1ère Conférence Francophone sur l'Éco-Conception en Génie Électrique (CONFREGE) (Toulouse, France, 5-7 déc. 2010).
Gaye, Khalifa, Gardoni, Mickaël et Coulibaly, Amadou.
2010.
« An information system to support the recycling process of manufactured products ».
In International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) : Virtual Concept 2010 (Bordeaux, France, 20-22 oct. 2010)
Gemme, F., Verreman, Y., Dubourg, L. et Jahazi, M..
2010.
« Numerical analysis of the dwell phase in friction stir welding and comparison with experimental data ».
Materials Science and Engineering A, vol. 527, nº 16-17.
pp. 4152-4160.
Gosselin, Claude, Tahan, Antoine, Ruel, Michel et Desnoyers, Mathieu.
2010.
« Simplified approach for monitoring the performance of multivariable processes ».
In Proceedings of the 2nd International Congress of Automation in the Mining Industry (Santiago, Chile, Nov. 10-12, 2010)
Huang, Ying, Gardoni, Mickaël et Coulibaly, Amadou.
2010.
« A decision support system designed for knowledge integration into personalized maintenance document ».
In International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) : Virtual Concept 2010 (Bordeaux, France, Oct. 20-22, 2010)
Huichao, Sun, Houssin, Rémy et Gardoni, Mickaël.
2010.
« La conception comportementale : une nouvelles approche pour améliorer la performance de produit ».
In Congrès Lamda-Mu17 (LM17) (La Rochelle, France, 5-7 oct. 2010)
Jiménez, L.-Maria et Gardoni, Mickaël.
2010.
« Reflections on creative and collaborative teamwork in charrettes, 24 hours of innovation ».
In International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) : Virtual Concept 2010 (Bordeaux, France, 20-22 oct. 2010)
Jing, Xu, Houssin, Rémy, Caillaud, Emannuel et Gardoni, Mickaël.
2010.
« Innovation in design by using the approach of knowledge management ».
In International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) : Virtual Concept 2010 (Bordeaux, France, Oct. 20-22, 2010)
Kamguem, René, Songmene, Victor et Niknam, Seyed Ali.
2010.
« Assessing the influence of acoustic emission parameters on machining processing using statistical analysis ».
In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Kheddouci, Fawzi et Rivest, Louis. 2010. « Archivage long-terme de la maquette numérique enrichie : problématique et alternatives de solutions ». Communication lors de la conférence : 4e Édition du Colloque sur les Technologies CAO/FAO au Québec (Sherbrooke, Canada, 19 mai 2010).
Khettabi, Riad, Djebara, Abdelhakim et Songmene, Victor.
2010.
« Characterization and control of micro and nanoparticles produced during dry cutting ».
In X th Safety, Health and Environment World Congress (São Paulo, Brazil, July, 25-28, 2010)
Khettabi, Riad, Masounave, Jacques et Songmene, Victor.
2010.
« Influence of machining processes on particles emissions ».
In 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)
Khettabi, Riad et Songmene, Victor. 2010. « Caractérisation et mesure des particules ultrafines émises lors du frottement et des procédés d'usinage ». Communication lors de la conférence : Activité d'animation scientifique de la communauté nanotoxicologie du Réseau de recherche en santé et sécurité du travail du Québec (RRSSTQ) (Montréal, Canada, 18 mars 2010).
Khettabi, Riad, Songmene, Victor et Masounave, Jacques.
2010.
« Effects of speeds, materials, and tool rake angles on metallic particle emission during orthogonal cutting ».
Journal of Materials Engineering and Performance, vol. 19, nº 6.
pp. 767-775.
Khettabi, Riad, Songmene, Victor, Zaghbani, Imed et Masounave, Jacques.
2010.
« Modeling of particle emission during dry orthogonal cutting ».
Journal of Materials Engineering and Performance, vol. 19, nº 6.
pp. 776-789.
Kouam, Jules, Masounave, Jacques, Songmene, Victor et Giraudeau, Alain.
2010.
« Pre-holes effect on cutting forces and particle emission during dry drilling ».
In 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)
Kouam, Jules, Songmene, Victor, Djebara, Abdelhakim et Khettabi, Riad.
2010.
« Metallic particle emission during friction testing of metals ».
In International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)
Lamarre, Laurent et David, Éric.
2010.
« A new approach to quantitatively evaluate aging. Case study : epoxy-mica ».
In IEEE International Symposium on Electrical Insulation (ISEI) (San Diego, CA, USA, June 6-9, 2010)
pp. 1-4.
Piscataway, NJ : Institute of Electrical and Electronics Engineers (IEEE).
Larose, S., Dubourg, L., Perron, C., Jahazi, M. et Wanjara, P..
2010.
« Limitation of distortion in friction stir welded (FSW) panels using needle peening ».
In THERMEC 2009 (Berlin, Germany, Aug. 25-29, 2009)
Coll. « Materials Science Forum », vol. 638-642.
pp. 1203-1208.
Berlin, Germany : Trans Tech Publications Ltd.
Malkoun, Jimmy, Gardoni, Mickaël et Rivest, Louis.
2010.
« The main elements brought by MOKA (KBE method) to promote an accelerated technology transfer process between aerospace and automotive industries ».
In ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2010) (Montréal, Québec, Canada, Aug. 15–18, 2010)
pp. 1221-1230.
New York, NY, USA : American Society of Mechanical Engineers.
Niknam, Seyed Ali , Rezaei, Seyed Mehdi et Songmene, Victor.
2010.
« A Review on bearing faults diagnosis using acoustic emission ».
In 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010)
Tehran, Iran : Civilica.
Niknam, Seyed Ali , Rezaei, Seyed Mehdi et Songmene, Victor.
2010.
« Sensitivity of acoustic emission to lubrication on bearing surfaces ».
In 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010)
Tehran, Iran : Civilica.
Niknam, Seyed Ali , Songmene, Victor et Joe Au, Y.H..
2010.
« Bearing condition monitoring in low rotating speed machine using acoustic emission ».
In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Niknam, Seyed Ali, Kamguem, René, Songmene, Victor et Kenné, Jean-Pierre.
2010.
« Machining factors influence on acoustic emission parameters ».
International Journal of Advances in Machining and Forming Operations, vol. 2, nº 2.
pp. 91-114.
Niknam, Seyed Ali et Songmene, Victor.
2010.
« The influence of bearing operational conditions on acoustic emission parameters ».
In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Pelletier, Francis, Masson, Christian, Tahan, Antoine et Jetté, Martin. 2010. « Experiment using high-frequency data sampling ». Affiche présentée lors de la conférence : Windpower Conference and Exhibition (Dallas, TX, USA, May 23-26, 2010). Pelletier, Francis, Masson, Christian, Tahan, Antoine et Jetté, Martin. 2010. « Modelling through high frequency data sampling and other advantages ». Communication lors de la conférence : European Wind Energy Conference and Exhibition (EWEC) (Warsaw, Poland, April 20-23, 2010). Potvin, Marc et Tahan, Antoine. 2010. « Investigation metrology ». Communication lors de la conférence : 3D Imaging Conference and Exposition (Anaheim, Ca., USA, May 18-20, 2010).
Quintana, Virgilio, Rivest, Louis, Pellerin, Robert, Venne, Frédérick et Kheddouci, Fawzi.
2010.
« Will model-based definition replace engineering drawings throughout the product lifecycle? A global perspective from aerospace industry ».
Computers in Industry, vol. 61, nº 5.
pp. 497-508.
Rabussier, Boris, Litwin, Jacek, Songmene, Victor et Masounave, Jacques.
2010.
« Effect of temperature and stress on friction of metal matrix composite ».
In 49th Annual Conference of Metallurgists (COM) (Vancouver, BC, Canada, Oct. 3-6, 2010)
Radvar-Esfahlan, Hassan et Tahan, Antoine.
2010.
« Nonrigid geometric inspection using intrinsic geometry ».
In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C., Canada, June 7-9, 2010)
Rivest, Louis, Kheddouci, Fawzi et Fortin, Clément.
2010.
« Towards long-term archiving of 3D annotated models : a sneak peek to a potential solution ».
In International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) : Virtual Concept 2010 (Bordeaux, France, Oct. 20-22, 2010)
Sami, A., David, Éric et Fréchette, Michel F..
2010.
« Dielectric response of high density polyethylene/SiO2 composites ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (West Lafayette, USA, Oct. 17-20, 2010)
pp. 1-4.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers (IEEE).
Sami, A., David, Éric et Fréchette, Michel F..
2010.
« Procedure for evaluating the crystallinity from X-ray diffraction scans of high and low density polyethylene/SiO2 composites ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (West Lafayette, USA, Oct. 17-20, 2010)
pp. 1-4.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers (IEEE).
Sami, A., David, Éric, Fréchette, Michel F. et Savoie, S..
2010.
« Breakdown and surface discharge involving PE/SiO2 nanocomposites ».
In IEEE International Symposium on Electrical Insulation (ISEI) (San Diego, CA, USA, June 6-9, 2010)
pp. 1-4.
Piscataway, NJ : Institute of Electrical and Electronics Engineers (IEEE).
Seers, Patrice, Terrier, P., Tahan, Antoine et Thomas, Marc.
2010.
« Case Study : hybrid vehicles : the Honda insight and Toyota Prius : transition towards the automobile of the future? ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
pp. 83-109. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Soltani, Reza, David, Éric et Lamarre, Laurent.
2010.
« The impact of humidity on partial discharge activity of large rotating machines ».
In IEEE International Symposium on Electrical Insulation (ISEI) (San Diego, CA, USA, June 6-9, 2010)
Piscataway, NJ : Institute of Electrical and Electronics Engineers (IEEE). Songmene, Victor. 2010. « Automated deburring and part finishing : progress and realisations ». Communication lors de la conférence : CRIAQ : Réunions du comité de recherche (Montréal, Canada, 13 janv. 2010). Tahan, Antoine. 2010. « Le rapport de mesure, puis après? ». Communication lors de la conférence : 2ème Journée de la métrologie en aérospatiale (JMA) (Montréal, Québec, Canada, 11 mars 2010).
Venne, Frédérick, Rivest, Louis et Desrochers, Alain.
2010.
« Assessment of 3D annotation tools as a substitute for 2D traditional engineering drawings in aerospace product development ».
Computer-Aided Design and Applications, vol. 7, nº 4.
pp. 547-563.
Vo, P., Jahazi, M. et Yue, S..
2010.
« FEM modelling of recrystallization behaviour for near-alpha Ti alloy IMI834 ».
In THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009)
Coll. « Advanced Materials Research », vol. 89-91.
pp. 592-597.
Berlin, Germany : Trans Tech Publications.
Xu, Jing, Houssin, Rémy, Caillaud, Emannuel et Gardoni, Mickaël.
2010.
« Macro process of knowledge management for continuous innovation ».
Journal of Knowledge Management, vol. 14, nº 4.
pp. 573-591.
Zaghbani, Imed, Songmene, Victor, Kientzy, Guillaume et LeHuy, Hoang.
2010.
« Evaluation of sustainability of mould steels based on machinability data ».
International Journal of Machining and Machinability of Materials, vol. 7, nº 1-2.
pp. 58-81.
Zaghbani, Imed, Songmene, Victor et Tousignant, D..
2010.
« A method for selection of the cutting conditions during robotic machining through the vibration response ».
In Premier Colloque International Innovations en Mécaniques Passives et ACTives pour l’ Analyse et la Conception des Systèmes Mécaniques (IMPACT) = First International Conference Passives and Actives Mechanical Innovations in Analysis and Design of Mechanica (Djerba, Tunisie, 22-24 août 2010)
2009
Badri, Béchir, Thomas, Marc, Sassi, Sadok, Zaghbani, Imed, Songmene, Victor, Lakis, A. A. et Mureithi, N..
2009.
« Instabilité des fraiseuses opérant à haute vitesse, provoquée par l’intéraction des défauts de roulements avec les résonances ».
In Proceedings of the 27th Seminar on Machinery Vibration (Vancouver, BC, Canada, Oct. 28-30, 2009)
Canadian Machinery Vibration Association (CMVA) :
Badri, Béchir, Thomas, Marc, Sassi, Sadok, Zaghbani, Imed, Songmene, Victor, Lakis, A. A. et Mureithi, N..
2009.
« Étude du comportement des roulements dans les rotors tournant à haute vitesse. ».
In 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
Balout, B., Masounave, Jacques et Songmene, Victor.
2009.
« Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy ».
Journal of Materials Processing Technology, vol. 209, nº 18-19.
pp. 5955-5963.
Balout, Bahaa, Songmene, Victor et Masounave, Jacques.
2009.
« Mise en forme par centrifugation d'un composite à matrice d'aluminium gradué : modélisation de la ségrégation des particules pendant le processus de solidification ».
In
Encyclopédie de la recherche sur l'aluminium au Québec.
Éd. 2008.
Chicoutimi : Les Presses de l'aluminium PRAL.
Brailovski, V., Prokoshkin, S. D., Demers, V., Inaekyan, K. et Khmelevskaya, I. Yu.
2009.
« Property features of Ti-Ni SMA subjected to severe cold rolling and post-deformation annealing ».
In Proceedings of the International Conference on Martensitic Transformations, June 29-July 05, 2008 : ICOMAT : Santa Fe, New Mexico, USA, 2008 (Santa Fe, NM, USA, June 29-July 5, 2008)
Coll. « International Conference on Martensitic Transformations (ICOMAT) »
pp. 323-327.
Warrendale, PA, USA : TMS (The Minerals, Metals & Materials Society).
Brailovski, Vladimir, Prokoshkin, S. D., Inaekyan, K. E. et Demers, V..
2009.
« Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ».
In 8th European Symposium on Martensitic Transformations (ESOMAT) (Prague, Czech Republic, Sept. 7-11, 2009)
Cedex A, France : E D P Sciences.
Cao, X. et Jahazi, M..
2009.
« Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser ».
Optics and Lasers in Engineering, vol. 47, nº 11.
pp. 1231-1241.
Cao, X. et Jahazi, M..
2009.
« Effect of welding speed on lap joint quality of AZ31 magnesium alloy ».
In Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008)
pp. 72-80.
ASM International.
Cao, X. et Jahazi, M..
2009.
« Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy ».
Materials and Design, vol. 30, nº 6.
pp. 2033-2042.
Cao, X., Rivaux, B., Jahazi, M., Cuddy, J. et Birur, A..
2009.
« Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser ».
Journal of Materials Science, vol. 44, nº 17.
pp. 4557-4571.
Chamanfar, A., Jahazi, M., Yue, S., Gholipour, J. et Wanjara, P..
2009.
« Linear friction welding behavior of Waspaloy ».
In Materials Science and Technology Conference and Exhibition 2009, MS and T'09 (Pittsburgh, PA, USA, Oct. 25-29, 2009)
pp. 2511-2522.
Association for Iron and Steel Technology.
Coman, E., Ghosh, K., Jahazi, M. et Dubourg, L..
2009.
« A study of the deformation and residual stress in an aircraft fuselage panel welded by friction stir welding ».
International Journal of Advanced Manufacturing System, vol. 11, nº 2.
pp. 75-84.
Dalgaard, E., Jahazi, Mohammad, Merati, Ali et Wanjara, P..
2009.
« Mechanical properties of linear friction welded Ti-6-4V alloy ».
In XIX International Symposium on Air Breathing Engines 2009 : (ISABE 2009) : Montreal, Canada, 7-11 September 2009 (Montreal, QC, Canada, Sept. 7-11, 2009)
pp. 1416-1424.
American Institute of Aeronautics and Astronautics.
Demers, V., Brailovski, Vladimir, Prokoshkin, S. D. et Inaekyan, K. E..
2009.
« Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti-Ni shape memory alloys ».
Journal of Materials Processing Technology, vol. 209, nº 6.
pp. 3096-3105.
Demers, V., Brailovski, Vladimir, Prokoshkin, S. D. et Inaekyan, K. E..
2009.
« Thermomechanical fatigue of nanostructured Ti-Ni shape memory alloys ».
Materials Science and Engineering : A, vol. 513-514.
pp. 185-196.
Demoly, Frédéric, Gomes, Samuel, Eynard, Benoît, Rivest, Louis et Sagot, Jean-Claude.
2009.
« Assembly-oriented product structure based on preliminary assembly process engineering ».
In Proceedings of ICED 09, the 17th International Conference on Engineering Design, Vol. 7, Design for X (Stanford, CA, USA, Aug. 24-27, 2009)
pp. 161-172.
Demoly, Frédéric, Gomes, Samuel, Eynard, Benoît, Rivest, Louis et Sagot, Jean-Claude.
2009.
« Vers un modèle multi-vues pour la conception orientée assemblage ».
In 11ème Colloque National Atelier Inter-Établissements de Productique et Pôle de Ressources Informatiques pour la MECAnique (AIP PRIMECA) (Plagne, France, 22-24 avril 2009)
Djebara, Abdelhakim et Songmene, Victor. 2009. « Mesure et caractérisation des nanoparticules (Nps) métalliques émises lors de l'usinage ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009).
Dubé, M. et Doquet, V..
2009.
« Investigation of the thermo-mechanical behavior of a borosilicate glass used for nuclear waste vitrification ».
In 7th European Solid Mechanics Conference (ESMC7) (Lisbon, Portugal, Sept. 7-11, 2009)
Dubé, M., Hubert, P., Yousefpour, A. et Denault, J..
2009.
« Fatigue failure characterisation of resistance-welded thermoplastic composites skin/stringer joints ».
International Journal of Fatigue, vol. 31, nº 4.
pp. 719-725.
Dubourg, L., Gholipour, J. et Jahazi, M..
2009.
« Friction stir welding of 2024-T3 aluminum tubes for hydroforming application ».
In Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008)
pp. 549-556.
ASM International.
Gagnon, Martin, Tahan, Antoine et Coutu, André.
2009.
« Uncertainty in operational modal analysis of hydraulic turbine components ».
[Article de conférence]. International Journal of Fluid Machinery and Systems, vol. 2, nº 4.
pp. 278-285.
Haghshenas, M., Zarei-Hanzaki, A. et Jahazi, M..
2009.
« An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy ».
Materials Characterization, vol. 60, nº 8.
pp. 817-823. Hallé, Stéphane, Kouam, Jules, Songmene, Victor, Morency, François, Viens, Martin, Cloutier, Yves, Masounave, Jacques, Khettabi, Riad et Djebara, Abdelhakim. 2009. « Procédure de mesure et de contrôle des nanoparticules manufacturés ». Communication lors de la conférence : Conférences Scientifiques, Sécurité des Travailleurs et Contrôle des Risques Industriels (Montréal, QC, Canada, 17 sept. 2009). Khettabi, R., Djebara, A., Songméné, V., Viens, M., Hallé, S., Morency, F., Cloutier, Y., Kouam, J. et Masounave, J.. 2009. « Procedure of measuring and controlling manufactured nanoparticles ». Communication lors de la conférence : INNO 2009 : La semaine de l'innovation (Montréal, QC, Canada, 23-24 avr. 2009). Khettabi, Riad, Djebara, Abdelhakim et Songmene, Victor. 2009. « Nano and micro particles emission study during metal cutting ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009). Khettabi, Riad, Djebara, Abdelhakim, Songmene, Victor, Viens, Martin, Hallé, Stéphane, Morency, François, Cloutier, Yves, Kouam, Jules et Masounave, Jacques. 2009. « Control and measuring of manufactured nanoparticle ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009).
Khettabi, Riad et Songmene, Victor.
2009.
« Particle emission during orthogonal and oblique cutting ».
International Journal of Advances in Machining and Forming Operations, vol. 1, nº 1.
pp. 1-10.
Liu, C., Chen, D. L., Bhole, S., Cao, X. et Jahazi, M..
2009.
« Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy ».
Materials Characterization, vol. 60, nº 5.
pp. 370-376.
Merati, A., Deronja, J., Dubourg, L. et Jahazi, M..
2009.
« Friction stir processing technology for the repair of nickel-aluminum bronze ».
In Canadian Aeronautics and Space Institute Conference (AERO 2009) (Kanata, ON, Canada, May 5-7, 2009)
Merati, A., Dubourg, L. et Jahazi, M..
2009.
« Application of FSW technology for additive repair of damaged components ».
In RTO-MP-AVT-163 Specialists' Meeting on Additive Technology for Repair of Military Hardware (Bonn, Germany, Oct. 19-22, 2009)
NATO Science and Technology Organization.
Quintana, Virgilio, Rivest, Louis, Pellerin, Robert, Tahan, Antoine et Venne, Frédérick.
2009.
« From fully dimensioned 2D drawings to reduced dimensioning 3D model-based definition ».
In Proceedings of the International Conference on Product Lifecycle Management : Supporting the Extended Enterprise (Bath, United Kingdom, July 6-9, 2009)
pp. 539-548.
Geneve, Switzerland : Inderscience Enterprise Ltd.
Quintana, Virgilio, Rivest, Louis, Pellerin, Robert et Venne, Frédérick.
2009.
« Methodology for the application of the model-based definition approach for managing the product definition ».
In International CAD Conference and Exhibition (CAD) (Reno, NV, USA, June 8-12, 2009)
Quintana, Virgilio, Rivest, Louis, Pellerin, Robert et Venne, Frédérick.
2009.
« Methodology for the implementation of the model-based definition approach ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Montreal, QC, Canada, May 13-15, 2009)
Rivest, Louis. 2009. « CADz Detector : Détecteur de plagiat pour la CAO ». Communication lors de la conférence : Atelier universitaire sur le plagiat dans les universités québécoises à l’ère du numérique (Trois-Rivières, QC, Canada, 29 oct. 2009). Rivest, Louis. 2009. « Le dessin d'ingénierie traditionnel sera-t-il toujours nécessaire? ». Communication lors de la conférence : Journée Thématique - Définition Numérique des Produits (Montréal, QC, Canada, 5 juin 2009).
Sghir, K. A., El Badaoui, M., Thomas, Marc, Zaghbani, Imed, Songmene, Victor, Lakis, A. A. et Mureithi, N..
2009.
« Identification aveugle paramétrique basée sur la cyclostationnarité à l’ordre deux de la fonction de transfert à partir des mesures vibratoires ».
In 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
Songmene, Victor. 2009. « Dry machining and its effects on machining costs and shop-floor air quality ». Communication lors de la conférence : Hiroshima Aerospace Seminar (Montreal, QC, Canada, Oct. 7, 2009).
St-Martin, Serge, Chatelain, Jean-François, Mayer, René et Paris, H..
2009.
« Étude du comportement dynamique d'une paroi mince en alliage léger durant une opération d'usinage haute vitesse ».
Revue d'Ingénierie Numérique Collaborative, vol. 3, nº 1.
Tahan, Antoine. 2009. « La gestion des variations géométriques : le présent et l'avenir ». Communication lors de la conférence : 1ère Journée de la Métrologie en Aérospatiale (JMA) (Montréal, QC, Canada, 5 mars 2009).
Tahan, Antoine et Levesque, Sylvain.
2009.
« Exploiting the process capability of position geometric tolerance according GD & T ASME Y14.5M ».
In International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009)
pp. 1267-1272.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Tahan, Antoine et Levesque, Sylvain.
2009.
« Exploiting the process capability of profile tolerance according GD&T ASME-Y14.5M ».
In International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009)
pp. 1285-1290.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Venne, Frédérick, Rivest, Louis et Desrochers, Alain.
2009.
« Capture des notes, dimensions et tolérances au sein de la maquette numérique 3D aéronautique ».
Revue d'Ingénierie Numérique Collaborative, vol. 3, nº 1.
Wanjara, P. et Jahazi, M..
2009.
« Application of shear punch testing to study microstructure-property relationships in electron beam welded 17-4 PH stainless steel ».
Canadian Metallurgical Quarterly, vol. 48, nº 3.
pp. 317-326.
Zaghbani, Imed et Songmene, Victor.
2009.
« A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys ».
Journal of Materials Processing Technology, vol. 209, nº 5.
pp. 2532-2544.
Zaghbani, Imed et Songmene, Victor.
2009.
« Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis ».
International Journal of Machine Tools and Manufacture, vol. 49, nº 12-13.
pp. 947-957.
Zaghbani, Imed, Songmene, Victor et Khettabi, Riad.
2009.
« Fine and ultrafine particle characterization and modeling in high-speed milling of 6061-T6 aluminum alloy ».
Journal of Materials Engineering and Performance, vol. 18, nº 1.
pp. 38-48. 2008
Abenhaïm, G.N., Tahan, Antoine et Maranzana, Roland.
2008.
« Nouveau algorithme pour l'inspection des coques flexibles par déplacement itératif ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2008.
« Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy ».
Materials Science and Engineering A, vol. 472, nº 1-2.
pp. 179-186.
Al-Kazzaz, H., Medraj, M., Cao, X. et Jahazi, M..
2008.
« Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: modeling and experimental investigations ».
Materials Chemistry and Physics, vol. 109, nº 1.
pp. 61-76.
Al-Kazzaz, Haider, Cao, Xinjin, Jahazi, Mohammad et Medraj, Mamoun.
2008.
« Reliability of laser welding process for ZE41A-T5 magnesium alloy sand castings ».
Materials Transactions, vol. 49, nº 4.
pp. 774-781.
Ateme-Nguema, B., Dao, Thien-My et Songmene, Victor.
2008.
« New approach based on RSM and ants colony system for multi-objective Optimization problem: a case study ».
In 14th International Conference on Industry, Engineering, and Management Systems (IEMS) (Cocoa Beach, FL, USA, Mar. 10-12, 2008)
Balout, Bahaa, Songmene, Victor et Masounave, Jacques.
2008.
« Perçage à sec de l'aluminium et alliages métalliques ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Bouikni, Nadjib, Rivest, Louis et Desrochers, Alain.
2008.
« A multiple views management system for concurrent engineering and PLM ».
Concurrent Engineering : Research and Applications, vol. 16, nº 1.
pp. 61-72.
Boutana, N., Bocher, P., Jahazi, M., Piot, D. et Montheillet, F..
2008.
« Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 32, nº 2.
pp. 195-213.
Boutana, N., Bocher, Philippe, Jahazi, M., Piot, D. et Montheillet, F..
2008.
« The microstructural modeling of room temperature creep in titanium alloys using cellular automata model ».
International Journal of Microstructure and Materials Properties, vol. 3, nº 4-5.
pp. 642-653.
Cao, X., Guo, M. et Jahazi, M..
2008.
« Continuous wave ND:YAG laser welding of Ti-6A1-4V titanium alloy ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 197-208.
Canadian Institute of Mining Metallurgy & Petroleum.
Cao, X. et Jahazi, M..
2008.
« Overview of friction stir and laser welding techniques for lightweight alloys ».
Canadian Welding Association Journal.
pp. 19-30.
Cao, X., Jahazi, M., Afrin, N. et Chen, D. L..
2008.
« Fatigue properties of friction stir welded AZ31B magnesium alloy ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 377-389.
Canadian Institute of Mining Metallurgy & Petroleum.
Cao, X., Jahazi, M., Al-Kazzaz, H. et Medraj, M..
2008.
« Modelling of work-hardening behaviour for laser welded magnesium alloy ».
International Journal of Materials Research, vol. 99, nº 2.
pp. 216-221.
Cao, X., Jahazi, M., Fournier, J. et Alain, M..
2008.
« Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings ».
Journal of Materials Processing Technology, vol. 205, nº 1–3.
pp. 322-331.
Cao, X., Rivaux, B., Jahazi, M. C., Cuddy, J. et Birur, A..
2008.
« Effect of joint gap on Inconel 718 alloy quality welded using 4 kW continuous wave ND:YAG laser ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 313-324.
Canadian Institute of Mining Metallurgy & Petroleum.
Cao, X., Xiao, M., Jahazi, M., Fournier, J. et Alain, M..
2008.
« Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method ».
Materials and Manufacturing Processes, vol. 23, nº 4.
pp. 413-418.
Chatelain, Jean-François, Roy, Réjean et Mayer, René.
2008.
« Development of a spiral trajectory for high speed roughing of light alloy aerospace components ».
WSEAS Transactions on Applied and Theoretical Mechanics, vol. 3, nº 3.
pp. 83-93.
Demoly, F., Gomes, S., Eynard, B., Rivest, Louis et Sagot, J.-C..
2008.
« Towards a collaborative DFA approach based on PLM ».
In 2nd CIRP Conference on Assembly Technologies & Systems (CATS) (Toronto, ON, Canada, Sept. 21-23, 2008)
pp. 100-113.
Dubé, M., Hubert, P., Yousefpour, A. et Denault, J..
2008.
« Current leakage prevention in resistance welding of carbon fibre reinforced thermoplastics ».
Composites Science and Technology, vol. 68, nº 6.
pp. 1579-1587.
Dubé, Martine, Hubert, Pascal, Gallet, Jan N. A. H., Stavrov, Darko, Bersee, Harald E. N. et Yousefpour, Ali.
2008.
« Fatigue performance characterisation of resistance-welded thermoplastic composites ».
Composites Science and Technology, vol. 68, nº 7–8.
pp. 1759-1765.
Dubourg, L., Amargier, R. et Jahazi, M..
2008.
« Relationship between FSW parameters, hardness and tensile properties of 7075-T6 and 2098-T851 similar but welds ».
In 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008)
TWI Ltd.
Dubourg, L., Merati, A., Gallant, M. et Jahazi, M..
2008.
« Manufacturing of aircraft panels by friction stir lap welding of 7075-T6 stringers on 2024-T3 skin: process optimization and mechanical properties ».
In 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008)
TWI Ltd.
El Hani, M.A., Rivest, Louis et Fortin, C..
2008.
« Propagating engineering changes to manufacturing process planning: does PLM meet the need? ».
In 4th International Conference on Product Lifecycle Management (PLM) (Milan, Italy, July 11-13, 2007)
pp. 517-526.
Geneve, Switzerland : Inderscience Enterprises Limited.
Gemme, F., Verreman, Y., Dubourg, L. et Jahazi, M..
2008.
« Friction stir welding of 7075 aluminium alloy : finite element modelling of the dwell phase ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 77-86.
Canadian Institute of Mining Metallurgy & Petroleum.
Germain, L., Gey, N., Humbert, M., Vo, P., Jahazi, M. et Bocher, Philippe.
2008.
« Texture heterogeneities induced by subtransus processing of near alpha titanium alloys ».
Acta Materialia, vol. 56, nº 16.
pp. 4298-4308.
Gholipour, J. et Jahazi, M..
2008.
« Evaluation of lubricants in hydroforming of aerospace materials ».
In Plasticity 2008 (Kailua-Kona, HI, USA, Jan. 2-5, 2008)
Khettabi, R., Songmene, Victor, Masounave, Jacques et Zaghbani, Imed.
2008.
« Understanding the formation of nano and micro particles during metal cutting ».
International Journal of Systems Signal Control and Engineering Applications, vol. 1, nº 3.
pp. 203-210.
Khettabi, R., Zaghbani, Imed, Songmene, Victor et Masounave, Jacques.
2008.
« Identification et prédiction des fines poussières lors de l'usinage ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
Éd. 2007.
p. 56. Chicoutimi : Les Presses de l'aluminium PRAL.
Khettabi, Riad, Songmene, Victor et Masounave, Jacques.
2008.
« Influence des angles de coupe sur l'émission de poussières ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Khmelevskaya, I., Prokoshkin, S., Brailovski, Vladimir, Inaekyan, K., Demers, V., Gurtovaya, I., Korotitskiy, A. et Dobatkin, S..
2008.
« Functional properties of Ti-Ni-based shape memory alloys ».
In State-of-the-art Research and Application of SMAs Technologies (Acireale, Sicily, Italy, June 8-13, 2008)
Coll. « Advances in Science and Technology », vol. 59.
pp. 156-161.
Stafa-Zuerich, Suisse : Trans Tech Publications Ltd.
Kientzy, G., Zaghbani, Imed et Songmene, Victor.
2008.
« Usinabilité et aspects économiques de l'usinage à sec et de l'usinage lubrifié ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
Éd. 2007.
p. 54. Chicoutimi : Les Presses de l'aluminium PRAL.
Lacasse, Louis, Tahan, Antoine et Liu, Zhaoheng.
2008.
« Robust method for the automatic characterization of a wooden board's geometrical state ».
Quality Engineering, vol. 20, nº 2.
pp. 221-231.
Lévesque, D., Dubourg, L., Lord, M., Jahazi, M. et Blouin, A..
2008.
« Residual stress measurement in friction stir welds using laser ultrasonics ».
In Review of Progress in Quantitative Nondestructive Evaluation: Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation (Chicago, IL, USA, July 22-25, 2008)
Coll. « AIP Conference Proceedings », vol. 1096.
pp. 1719-1726.
AIP Publishing.
Lévesque, D., Dubourg, L., Mandache, C., Gougeon, P., Cao, X. et Jahazi, M. C..
2008.
« Assessment of friction stir welds with nondestructive methods ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 339-350.
Canadian Institute of Mining Metallurgy & Petroleum.
Mandache, Catalin, Dubourg, Laurent, Merati, Ali et Jahazi, Mohammad.
2008.
« Pulsed eddy current testing of friction stir welds ».
Materials Evaluation, vol. 66, nº 4.
pp. 382-387.
Mary, Caroline et Jahazi, Mohammad.
2008.
« Multi-scale analysis of IN-718 microstructure evolution during linear friction welding ».
Advanced Engineering Materials, vol. 10, nº 6.
pp. 573-578.
Mbou, E. et Songmene, Victor.
2008.
« Amélioration de la qualité et de la productivité de fraisage par le contrôle des conditions de coupe ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
Éd. 2007.
p. 55. Chicoutimi : Les Presses de l'aluminium, PRAL.
Pelletier, F., Masson, Christian et Tahan, Antoine.
2008.
« Power performance evaluation and improvement of operational wind power plant ».
In OSIsoft Wind Power User Group Meeting (Chicago, IL, USA, June 4, 2008)
Prokoshkin, S. D., Brailovski, Vladimir, Inaekyan, K. E., Demers, V., Khmelevskaya, I. Yu, Dobatkin, S. V. et Tatyanin, E. V..
2008.
« Structure and properties of severely cold-rolled and annealed Ti-Ni shape memory alloys ».
[Article de conférence]. Materials Science and Engineering : A, vol. 481-482.
pp. 114-118.
Roy, R., Chatelain, Jean-François, Mayer, R., Chalut, S. et Engin, S..
2008.
« Optimization of adaptive spiral toolpaths for pocket machining ».
In International Computer Aided Design Conference and Exhibition (CAD) (Orlando, FL, USA, June 23-27, 2008)
Roy, R., Chatelain, Jean-François, Mayer, R., Chalut, S. et Engin, S..
2008.
« Programming of a machining procedure for adaptive spiral cutting trajectories ».
In 10th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS) (Istanbul, Turkey, May 27-30, 2008)
pp. 127-132.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society (WSEAS).
Songmene, Victor, Balout, B. et Masounave, Jacques.
2008.
« Clean machining : experimental investigation on dust formation : Part II : influence of machining strategies and drill condition ».
International Journal of Environmentally Conscious Design & Manufacturing, vol. 14, nº 1.
pp. 17-33.
Songmene, Victor, Balout, B. et Masounave, Jacques.
2008.
« Clean machining: experimental investigation on dust formation - Part I: influence of machining parameters and chip formation ».
International Journal of Environmentally Conscious Design & Manufacturing , vol. 14, nº 1.
pp. 1-16.
Songmene, Victor, Masounave, Jacques et Khettabi, R..
2008.
« L'émission de poussières pendant l'usinage à sec : une synthèse ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
St-Martin, S., Chatelain, Jean-François, Mayer, R., Engin, S. et Chalut, S..
2008.
« Simulation de l'usinage de finition des parois minces de composantes aéronautiques en alliage léger ».
In Colloque sur la Recherche en Conception Assistée par Ordinateur (CAO) au Québec (Trois-Rivières, QC, Canada, 14 mai 2008)
St-Martin, Serge, Chatelain, Jean-François, Mayer, René, Engin, Serafettin et Chalut, Stéphane.
2008.
« Time domain simulation of thin wall surface finish machining for light alloy aerospace components ».
In Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
Vo, P., Jahazi, M. et Yue, S..
2008.
« Recrystallization during thermomechanical processing of IMI834 ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 39, nº 12.
pp. 2965-2980.
Wang, X., Jahazi, M. et Yue, S..
2008.
« Investigation of α platelet boundaries in a near-α titanium alloy ».
Materials Science and Engineering A, vol. 492, nº 1–2.
pp. 450-454.
Wanjara, P. et Jahazi, M..
2008.
« Assessing mechanical property gradients associated with microstructural changes in stainless steel weldments by shear punch testing ».
In International Symposium on Recent Developments in Advanced High Strength Steels Processing 2008 : Held at the 47th Conference of Metallurgists (COM) 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 195-206.
Canadian Institute of Mining Metallurgy & Petroleum.
Wanjara, P. et Jahazi, M..
2008.
« Characterization of electron beam welded 17-4 ph stainless steel ».
Canadian Metallurgical Quarterly, vol. 47, nº 4.
pp. 413-436.
Wanjara, P., Poirier, E. et Jahazi, M. C..
2008.
« Manufacture of a strut on a captive trajectory system by electron beam welding ».
In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008)
pp. 243-254.
Canadian Institute of Mining Metallurgy & Petroleum.
Zaghbani, Imed, Khettabi, R. et Songmene, Victor.
2008.
« Base de données environnementales pour les alliages d'aluminium ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
p. 1. Chicoutimi : Les Presses de l'aluminium PRAL. 2007
Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2007.
« Influence of friction stir welding on the tensile behaviour of AZ31B magnesium alloy ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
Canadian Institute of Mining, Metallurgy and Petroleum.
Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2007.
« Strain hardening behavior of a friction stir welded magnesium alloy ».
Scripta Materialia, vol. 57, nº 11.
pp. 1004-1007.
Balout, B., Songmene, Victor et Masounave, Jacques.
2007.
« An experimental study of dust generation during dry drilling of pre-cooled and pre-heated workpiece materials ».
Journal of Manufacturing Processes, vol. 9, nº 1.
pp. 23-34.
Ben Salah, M. et Chatelain, Jean-François.
2007.
« Part localization algorithm based on constrained alignment of surface patches ».
In Proceedings - 13th ISSAT International Conference on Reliability and Quality in Design (Seattle, WA, USA, Aug. 2-4, 2007)
pp. 270-275.
Piscataway, N. J., USA : International Society of Science and Applied Technologies.
Boutana, N., Bocher, Philippe, Jahazi, M., Piot, D. et Motheillet, F..
2007.
« Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ».
In Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007)
pp. 267-270.
Warrendale, PA, USA : Minerals, Metals and Materials Society. Brière-Côté, A., Rivest, Louis et Desrochers, A.. 2007. « Évolution de la structure d'un produit sur son cycle de vie dans un environnement hétérogène d'adaptation de produit à la demande ». Communication lors de la conférence : 75e Congrés de l'ACFAS (Trois-Rivières, QC, Canada, 7-11 mai 2007).
Cao, X. et Jahazi, M..
2007.
« Applications of laser welding and friction stir welding technologies for joining aerospace magnesium alloys ».
In LMT 2007 : proceedings of the Third International Conference on Light Metals Technology : September 24-26, 2007, Saint-Sauveur, Québec, Canada (Saint-Sauveur, QC, Canada, Sept. 24-26, 2007)
National Research Council Canada = Conseil national de recherches Canada.
Cao, X. et Jahazi, M..
2007.
« Friction stir processing of sand-cast aerospace magnesium alloy Ze41A-T5 ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
pp. 169-182.
Canadian Institute of Mining, Metallurgy and Petroleum.
Cao, X., Jahazi, M., Guerin, M. et Mishra, R. S..
2007.
« Friction stir welding of an aerospace magnesium alloy ».
In Friction Stir Welding and Processing IV (Orlando, FL, USA, Feb. 25-Mar. 1, 2007)
pp. 213-222.
Warrendale, PA : The Minerals, Metals & Materials Society.
Cao, Xinjin et Jahazi, Mohammad.
2007.
« New analyses of pressure filtration curves of Al alloys: a case study ».
In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006)
Coll. « Materials Science Forum », vol. 539-543.
pp. 351-356.
Vancouver, Canada : Trans Tech Publications Ltd.
Coman, E., Dubourg, L., Jahazi, M. et Ghosh, K..
2007.
« A study of the deformation and residual stresses in an aircraft fuselage panel joined by friction stir welding ».
In Proceedings of the 23rd ISPE Internaional Conference on CAD/CAM Robotics and Factories of the Future -CARS & FOF'07 (Bogota, Colombia, Aug. 16-18, 2007)
Universidad Militar Nueva Granada.
Corriveau, G., Guilbault, Raynald et Tahan, Antoine.
2007.
« Genetic algorithms and finite element coupling for mechanical optimization ».
In 10th International Conference on Optimum Design in Engineering (OPTI) (Myrtle Beach, USA, May 7- 9, 2007)
pp. 87-96.
Southampton, UK : WITPress.
Corriveau, G., Guilbault, Raynald et Tahan, Antoine.
2007.
« Optimisation d'une turbine hydroélectrique par algorithmes génétiques ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Dubé, M., Hubert, P., Yousefpour, A. et Denault, J..
2007.
« Resistance welding of thermoplastic composites skin/stringer joints ».
Composites Part A: Applied Science and Manufacturing, vol. 38, nº 12.
pp. 2541-2552.
Dubé, Martine, Hubert, Pascal, Yousefpour, Ali et Denault, Johanne.
2007.
« Fatigue performance of resistance-welded thermoplastic composite skin/stringer joints ».
In The use of composites in the 21st century to save energy and weight : SEICO 07, 28th SAMPE Europe international conference, April 02th - 04th, 2007, Hotel MERCURE Paris, Porte de Versailles ; proceedings (Paris, France, Apr. 2-4, 2007)
Society for the Advancement of Material and Process Engineering.
Dubé, Martine, Hubert, Pascal, Yousefpour, Ali, Gallet, Jan, Stavrov, Darko et Bersee, Harald E. N..
2007.
« Heating element optimisation in resistance welding of semi-crystalline and amorphous thermoplastic composites ».
In 6th Canadian Conference on Composite Materials (CANCOM 2007) (Winnipeg, MB, Canada, Aug. 14-17, 2007)
Etsida Mpiga, Félicia, Dao, Thien-My et Songmene, Victor.
2007.
« The hybrid simulation approach based on RSM and ants colony system for multiobjective optimization problem ».
In Proceedings of the 8th Asia Pacific Industrial Engineering & Management System and Chinese Institute of Industrial Engineers Conference (Kaohsiung, Taïwan, Dec. 9-12, 2007)
APIEM & CIIE.
Fairman, M., Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2007.
« Microstructural and microhardness evolution of friction stir processing AZ31B-H24 magnesium alloy ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
pp. 117-128.
Canadian Institute of Mining, Metallurgy and Petroleum.
Fairman, M., Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2007.
« Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy ».
Canadian Metallurgical Quarterly, vol. 46, nº 4.
pp. 425-432.
Germain, Lionel, Vo, Phuong, Gey, Nathalie, Jahazi, Mohammad, Humbert, Michel et Bocher, Philippe.
2007.
« Development of sharp local α microtextures during α/β thermo-mechanical processing of TIMETAL 834 ».
In 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007)
pp. 925-928.
Warrendale, USA : Minerals, Metals and Materials Society.
Khettabi, R., Songmene, Victor et Masounave, Jacques.
2007.
« Effect of tool lead angle and chip formation mode on dust emission in dry cutting ».
Journal of Materials Processing Technology, vol. 194, nº 1-3.
pp. 100-109.
Khettabi, R., Songmene, Victor et Masounave, Jacques.
2007.
« Modeling of fine dust during machining ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007)
Montréal : École de technologie supérieure.
Lacasse, L., Tahan, Antoine et Liu, Zhaoheng.
2007.
« Automatic characterization of wood board surface defects ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Lamarche, Bruno et Rivest, Louis.
2007.
« Achieving a dynamic product model with inter-features associations ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Lamarche, Bruno et Rivest, Louis.
2007.
« Dynamic product modeling with inter-features associations: comparing customization and automation ».
In International Computer Aided Design Conference and Exhibition (CAD) (Honolulu, HI, USA, June 25-29, 2007)
pp. 877-886.
Lamarche, Bruno et Rivest, Louis.
2007.
« Dynamic product modeling with inter-features associations: Comparing customization and automation ».
Computer-Aided Design and Applications, vol. 4, nº 6.
pp. 877-886.
Levesque, D., Dubourg, L., Mandache, C., Kruger, S. E., Lord, M., Merati, A., Jahazi, M. et Monchalin, J-P..
2007.
« Synthetic aperture focusing technique for the ultrasonic evaluation of friction stir welds ».
In Review of Progresses in Quantitative Nondestructive Evaluation : 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007)
Coll. « AIP conference proceedings », vol. 975.
pp. 263-270.
AIP Publishing.
Liu, A., Chen, D. L., Bhole, S., Cao, X. et Jahazi, M..
2007.
« Corrosion behavior of the stir zone in friction stir welded dissimilar joint of 2024 aluminium to AZ31 magnesium alloys ».
In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007)
pp. 129-140.
Canadian Institute of Mining, Metallurgy and Petroleum.
Mandache, C., Merati, A., Dubourg, L. et Jahazi, M..
2007.
« Pulsed Eddy Current Inspection of friction stir welded components ».
In ASNT fall conference and quality testing show 2007 (Las Vegas, NV, USA, Nov. 12-16, 2007)
ASNT. Maranzana, Roland, Msaaf, Omar et Rivest, Louis. 2007. « Interprétation des modèles géométriques 3D : application à la recherche de pièces et à la comparaison de leurs représentations géométriques ». Communication lors de la conférence : 75e Congrès de l'Association Francophone pour le Savoir (ACFAS) (Trois-Rivières, QC, Canada, 7-11 mai 2007).
Mary, C. et Jahazi, M..
2007.
« Linear friction welding of IN-718 process optimization and microstructure evolution ».
In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006)
Coll. « Advanced Materials Research »
pp. 357-362.
Vancouver, BC, Canada : Trans Tech Publications.
Msaaf, Omar, Maranzana, Roland et Rivest, Louis.
2007.
« Part data mining for information re-use in a PLM context ».
In ASME Turbo Expo 2007: Power for Land, Sea, and Air (Montreal, QC, Canada, May 14-17, 2007)
pp. 187-194.
New York, NY, USA : American Society of Mechanical Engineers.
Parent, Luc, Songmene, Victor et Kenné, Jean Pierre.
2007.
« A generalised model for optimising an end milling operation ».
Production Planning & Control , vol. 18, nº 4.
pp. 319-337.
Salah, B. et Chatelain, Jean-François.
2007.
« Part localization based on a surface patch alignment algorithm ».
In 2e Congrès International en Conception et Modélisation des Systèmes Mécaniques (CMSM) (Monastir, Tunisia, Mar. 19-21, 2007)
Songmene, Victor. 2007. « Usinage propre et concurrentiel ». Communication lors de la conférence : Conférence Scientifique sur la Sécurité des Travailleurs et le Contrôle des Risques Industriels (Montréal, QC, Canada, 2007).
Songmene, Victor, Masounave, Jacques et Khettabi, R..
2007.
« Dry machining and its effects on productivity, costs, environment and machine-shop air quality ».
In 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
pp. 51-60.
Songmene, Victor, Masounave, Jacques et Khettabi, R..
2007.
« Safe, environmentally-friendly and cost effective machining ».
In Safety Health and Environmental World Congress (SHEWC) (Santos, Brazil, July 22-25, 2007)
pp. 44-48.
Tahan, Antoine, Liu, Zhaoheng et Lacasse, L..
2007.
« New method for characterization of wood ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Uta, E., Humbert, M., Gey, N., Hazotte, A., Bocher, Philippe et Jahazi, M..
2007.
« Description and characterisation of texture heterogeneitites in titanium alloy Timetal 834 with a bimodal microstructure ».
In 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007)
pp. 259-262.
Warrendale, USA : Minerals, Metals and Materials Society.
Vo, P., Jahazi, M. et Yue, S..
2007.
« Recrystallization during Alpha + Beta Processing of IMI834 ».
In Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 1-5, 2007)
pp. 267-270.
Warrendale, PA, USA : Minerals, Metals and Materials Society.
Vo, P., Jahazi, M. et Yue, S..
2007.
« Recrystallization during beta working of IMI834 ».
In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006)
Coll. « Advanced Materials Research »
pp. 965-969.
Vancouver, BC, Canada : Trans Tech Publications.
Vo, Phuong, Jahazi, M., Yue, S. et Bocher, Philippe.
2007.
« Flow stress prediction during hot working of near-alpha titanium alloys ».
Materials Science and Engineering : A, vol. 447, nº 1-2.
pp. 99-110.
Wang, X., Vo, P., Jahazi, M. et Yue, S..
2007.
« Dwell fatigue microstructure in a near-α titanium alloy ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 38, nº 4.
pp. 831-839.
Wanjara, P., Brochu, M. et Jahazi, M..
2007.
« Electron beam freeform fabrication on stainless steel ».
In THERMEC 2006 (Vancouver, B.C, Canada, July 4-8, 2006)
Coll. « Materials Science Forum », vol. 539-543.
pp. 4938-4943.
Trans Tech Publications.
Wanjara, P., Brochu, M. et Jahazi, M..
2007.
« Electron beam freeforming of stainless steel using solid wire feed ».
Materials and Design, vol. 28, nº 8.
pp. 2278-2286.
Xiao, M., Poon, C., Wanjara, P., Jahazi, M., Fawaz, Z. et Krimbalis, P..
2007.
« Optimization of Nd-YAG laser welding process for Inconel 718 alloy ».
In Progress in Light Metals, Aerospace Materials and Superconductors (Beijing, China, June 25-30, 2006)
Coll. « Materials Science Forum », vol. 546-549.
pp. 1305-1308.
Trans Tech Publications.
Xinjin, Cao, Min, Xiao, Jahazi, M. et Shariff, T..
2007.
« Evolution of microstructures during laser surface cladding of magnesium alloy castings using welding wire ».
In THERMEC 2006 - Proceedings of the 5th International Conference on Processing and Manufacturing of Advanced Materials
Coll. « Materials Science Forum »
pp. 1735-1740.
Switzerland : Trans Tech Publications.
Zaghbani, Imed, Songmene, Victor et Khettabi, R..
2007.
« A simplified numerical model for orthogonal cutting ».
In 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
pp. 152-157.
Zaghbani, Imed, Songmene, Victor et Khettabi, R..
2007.
« Modeling of thin wall-parts deflection during high speed milling ».
In 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
pp. 111-115.
2006
Al-Kazzaz, H., Medraj, M., Cao, X., Xiao, M. et Jahazi, M..
2006.
« Effect of laser power and joint gap on weld quality of aerospace grade ZE41A-T5 magnesium alloy using Nd:YAG laser ».
In Magnesium technology in the global age : proceedings of the International Symposium on Magnesium Technology in the Global Age, October 1-4, 2006, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 503-518.
Canadian Institute of Mining, Metallurgy and Petroleum.
Balout, Bahaa, Songmene, Victor et Masounave, Jacques.
2006.
« Usinabilité d'alliages légers et des composites lors du perçage à sec ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 30, nº 3.
pp. 329-343.
Bouikni, Nadjib, Desrochers, Alain et Rivest, Louis.
2006.
« A product feature evolution validation model for engineering change management ».
Journal of Computing and Information Science in Engineering, vol. 6, nº 2.
pp. 188-195.
Boutana, Nabil, Bocher, Philippe, Jahazi, Mohammad, Piot, D. et Montheillet, F..
2006.
« Utilisation des automates cellulaires pour étudier le comportement en fatigue-fluage des alliages de titane ».
In Matériaux 2006 (Dijon, France, 13-17 nov. 2006)
pp. 781-790.
Cao, X., Jahazi, M., Immarigeon, J. P. et Wallace, W..
2006.
« A review of laser welding techniques for magnesium alloys ».
Journal of Materials Processing Technology, vol. 171, nº 2.
pp. 188-204.
Cao, X., Jahazi, M. et Mehta, R..
2006.
« Friction stir welding of AZ31B-H24 magnesium alloy butt joints ».
In 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006)
pp. 279-289.
TWI Ltd.
Cao, X., Xiao, M. et Jahazi, M..
2006.
« Effect of processing parameters on laser cladding of magnesium alloy castings ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 147-158.
Canadian Institute of Mining, Metallurgy and Petroleum.
Cao, X., Xiao, M., Jahazi, M. et Shariff, T..
2006.
« Surface cladding of magnesium alloy castings using Nd:YAG laser ».
In Magnesium technology 2006 : proceedings of the symposium held during the TMS 2006 annual meeting in San Antonio, Texas, USA, March 12-16, 2006 (San Antonio, TX, USA, Mar. 12-16, 2006)
pp. 359-364.
Warrendale, Pa : The Minerals, Metals & Materials Society.
Dubé, Martine, Hubert, Pascal, Yousefpour, Ali et Denault, Johanne.
2006.
« Resistance welding of thermoplastic composites skin/stringer specimens ».
In SAMPE '06 : creating new opportunities for the world economy (Long Beach, CA, USA, Apr. 30-May 4, 2006)
Society for the Advancement of Material and Process Engineering.
Dubourg, L., Gagnon, F. O., Nadeau, F., St-Georges, L. et Jahazi, M..
2006.
« Process window optimization for FSW of thin and thick sheet Al alloys using statistical methods ».
In 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006)
pp. 419-430.
TWI.
Dubourg, L., Jahazi, M., Dezaise, G. et Bocher, P..
2006.
« Microstructure and mechanical characterisation of FSW 7075-T6 lap joints ».
In Aerospace Materials and Manufacturing: Emerging Materials, Processes, and Repair Techniques (Montréal, Canada, Oct.1-4, 2006)
pp. 107-120.
Canadian Institute of Mining, Metallurgy and Petroleum.
El Hani, M.A., Rivest, Louis et Fortin, C..
2006.
« On specifying an information management tool to support manufacturing process planning in aerospace: a case study ».
In ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) (Philadelphia, PA, USA, Sept. 10-13, 2006)
pp. 143-151.
New York, NY, USA : American Society of Mechanical Engineers.
Gagnon, Martin, Tahan, Antoine, Coutu, André et Thomas, Marc.
2006.
« Analyse modale opérationnelle en présence d'excitations harmoniques : étude de cas sur des composantes de turbine hydroélectrique ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montréal, QC, Canada, 25-27 oct. 2006)
pp. 320-329.
Calgary, Canada : ACVM.
Gholipour, J. et Jahazi, M..
2006.
« Effect of lubricant in hydroforming of Ni-based super alloy tubes ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 447-460.
Canadian Institute of Mining, Metallurgy and Petroleum.
Humbert, Michel, Germain, L., Gey, N., Bocher, Philippe et Jahazi, M..
2006.
« Study of the variant selection in sharp textured regions of bimodal IMI 834 billet ».
Materials Science and Engineering : A, vol. 430, nº 1-2.
pp. 157-164.
Jalilian, F., Drew, R. A. L. et Jahazi, M..
2006.
« Joining of Inconel 617 sheets using TLP bonding process with Ni-Si-B interlayer ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 315-326.
Canadian Institute of Mining, Metallurgy and Petroleum.
Jalilian, F., Jahazi, M. et Drew, R. A. L..
2006.
« Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni-Si-B filler metal ».
Materials Science and Engineering A, vol. 423, nº 1-2.
pp. 269-281.
Khodabandeh, A. R., Jahazi, M., Yue, S. et Aghdashi, S. T..
2006.
« The determination of optimum forging conditions for the production of high strength-high impact toughness automotive parts ».
Materials and Manufacturing Processes, vol. 21, nº 1.
pp. 105-110.
Michaud, J.P., Songmene, Victor et Tahan, Antoine.
2006.
« Aluminium alloy 7050 T7451 thin wall high-speed machining parts study ».
In 3th International Symposium on Aerospace Materials and Manufacturing Processes: Emerging Materials, Manufacturing, and Repair Techniques (Montreal, QC, Canada, Oct. 2-4, 2006)
Canada : The Metallurgy and Materials Society.
Njoya, D.R., Khettabi, R., Songmene, Victor et Masounave, Jacques.
2006.
« Influence des matériaux et des procédés d'usinage sur les émissions de poussières fines ».
In 45th International Conference of Metallurgists (Montréal, QC, Canada, Oct. 1-4, 2006)
Montreal, Canada : Institut canadien des mines. Rivest, Louis. 2006. « Drawingless product development process ». Communication lors de la conférence : Consortium for Research and Innovation in Aerospace in Quebec PLM Workshop (CRIAQ) (Longueuil, QC, Canada, Apr. 5, 2006). Rivest, Louis et Msaaf, Omar. 2006. « La MNS et son courtier pour une exploitation efficace de la géométrie en MDO ». Communication lors de la conférence : Journée MOSAIC (Montréal, QC, Canada, 31 mai 2006).
Soufi, K., Chatelain, Jean-François et Maranzana, Roland.
2006.
« A product change management system based on active features ».
In 16th CIRP International Design Seminar, Design & Innovation for Sustainable Society (Kananaskis, AB, Canada, July 16-19, 2006)
Tremblay, T.G., Rivest, Louis, Msaaf, O. et Maranzana, Roland.
2006.
« The role of associations in CAD and PLM for handling change propagation during product development ».
In Leading the Web in concurrent engineering : next generation concurrent engineering (Antibes, France, Sept. 18-21, 2006)
pp. 507-514.
Amsterdam, The Netherlands : IOS Press.
Uta, E., Humbert, M., Gey, N., Bocher, P. et Jahazi, M..
2006.
« Mise en évidence et caractérisation des hétérogénéités de textures dans l'alliage de titane IMI 834 de microstructure bimodale à vocation aéronautique ».
In Materiaux 2006 : Dijon, 13-17 Novembre 2006 : [recueil de la conference sur CD-ROM] (Dijon, France, 13-17 nov. 2006)
Dijon : Université de Bourgogne.
Vo, P., Yue, S. et Jahazi, M..
2006.
« Microstructure development of a near alpha-titanium alloy during high temperature deformation ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 473-484.
Canadian Institute of Mining, Metallurgy and Petroleum.
Wang, X., Jahazi, M. et Yue, S..
2006.
« Substructure of high temperature compressed titanium alloy IMI 834 ».
Materials Science and Engineering A, vol. 434, nº 1-2.
pp. 188-193.
Wanjara, P., Brochu, M. et Jahazi, M..
2006.
« Thin gauge titanium manufacturing using multiple-pass electron beam welding ».
Materials and Manufacturing Processes, vol. 21, nº 5.
pp. 439-451.
Wanjara, Priti, Jahazi, M., Monajati, H. et Yue, S..
2006.
« Influence of thermomechanical processing on microstructural evolution in near- alloy IMI834 ».
Materials Science and Engineering A, vol. 416, nº 1-2.
pp. 300-311.
Xiao, M., Wanjara, P., Jahazi, M. et Poon, C..
2006.
« Nd:Yag-laser welding of Inconel 718 alloy ».
In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006)
pp. 395-412.
Canadian Institute of Mining, Metallurgy and Petroleum. 2005
Al-Kazzaz, H., Medraj, M., Cao, X., Jahazi, M. et Min, X..
2005.
« Effect of welding speed on Nd:YAG laser weldability of ZE41A-T5 magnesium sand castings ».
In Light metals 2005 : proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada (Calgary, AB, Canada, Aug. 21-24, 2005)
pp. 137-149.
Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.
Bocher, P., Jahazi, M., Germain, L., Gey, N. et Humbert, M..
2005.
« Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005)
pp. 523-530.
Montréal, Qué., Canada : École de technologie supérieure.
Bocher, Philippe, Jahazi, Mohammad, Germain, Lionel, Wanjara, Priti, Gey, Nathalie et Humbert, Michel.
2005.
« β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ».
Solid State Phenomena, vol. 105.
pp. 127-132.
Boutana, N., Bocher, P., Jahazi, M., Savoie, J., Piot, D. et Montheillet, F..
2005.
« Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005)
pp. 273-280.
Montréal, Qué., Canada : École de technologie supérieure.
Cao, X. et Jahazi, M..
2005.
« Estimation of resistance of filter media used for Prefil Footprinter tests of liquid aluminium alloys ».
Materials Science and Technology, vol. 21, nº 10.
pp. 1192-1198.
Cao, X. et Jahazi, M..
2005.
« Examination and verification of the filtration mechanism of cake mode during the pressure filtration tests of liquid Al–Si cast alloys ».
Materials Science and Engineering A, vol. 408, nº 1–2.
pp. 234-242.
Cao, X., Xiao, M., Jahazi, M. et Immarigeon, J. P..
2005.
« Continuous wave ND:YAG laser welding of sand-cast ZE41A-T5 magnesium alloys ».
Materials and Manufacturing Processes, vol. 20, nº 6.
pp. 987-1004.
Cao, X., Xiao, M., Jahazi, M. et Lin, Y. L..
2005.
« Nd:YAG laser welding of magnesium alloy castings ».
In Magnesium Technology 2005: Proceedings of the Symposium Held During the 2005 TMS Annual Meeting in San Francisco, California, U.S.A., February 13-17, 2005 (San Francisco, CA, USA, Feb. 13-17, 2005)
pp. 441-443.
The Minerals, Metals & Materials Society.
Castonguay, J. P. et Tahan, A. S..
2005.
« Correlated characteristics identification and effect in statistical tolerance design ».
WSEAS Transactions on Mathematics, vol. 4, nº 4.
pp. 319-326.
Chatelain, Jean-François.
2005.
« A level-based optimization algorithm for complex part localization ».
Precision Engineering, vol. 29, nº 2.
197–207.
Dubé, Martine, Hubert, Pascal, Yousefpour, Ali et Denault, J..
2005.
« Mechanical performance of resistance-welded thermoplastic composites skin/stringer specimens ».
In SAMPE Fall technical conference : [proceedings] (Seattle, WA, USA, Oct. 31-Nov. 3, 2005)
Society for the Advancement of Material and Process Engineering.
Germain, L., Gey, N., Humbert, M., Bocher, P. et Jahazi, M..
2005.
« β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ».
In Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005)
Coll. « Materials Science Forum », vol. 495-497.
pp. 663-668.
Trans Tech Publications.
Germain, L., Gey, N., Humbert, M., Hazotte, A., Bocher, P. et Jahazi, M..
2005.
« An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ».
Materials Characterization, vol. 54, nº 3.
pp. 216-222.
Germain, Lionel, Gey, Nathalie, Humbert, Ludovic, Bocher, Philippe et Jahazi, Mohammad.
2005.
« Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ».
Acta Materialia, vol. 53, nº 13.
pp. 3535-3543.
Jalilian, F., Drew, R. A. L. et Jahazi, M..
2005.
« Joining of Inconel 617 sheets in TLP bonding using Ni - P and Ni - Si - B alloys ».
In Trends in Welding Research - Proceedings of the 7th International Conference (Pine Mountain, GA, USA, May 16-20, 2005)
pp. 873-878.
Pine Mountain, GA, United states : ASM International.
Khodabandeh, Ali Reza, Jahazi, Mohammad, Yue, Steve et Bocher, Philippe.
2005.
« Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ».
ISIJ International, vol. 45, nº 2.
pp. 272-280.
Monajati, H., Taheri, A. K., Jahazi, M. et Yue, S..
2005.
« Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 36, nº 4.
pp. 895-905.
Monajati, H., Zarandi, F., Jahazi, M. et Yue, S..
2005.
« Strain induced γ′ precipitation in nickel base superalloy Udimet 720 using a stress relaxation based technique ».
Scripta Materialia, vol. 52, nº 8.
pp. 771-776. Msaaf, O. et Rivest, Louis. 2005. « Le courtage de données numériques structurées : un catalyseur pour l'optimisation multidisciplinaire ». Communication lors de la conférence : 2e Journée MOSAIC (Montréal, QC, Canada, 9 sept. 2005). Tremblay, T.G., Rivest, Louis, Lamarche, Bruno et Maranzana, Roland. 2005. « Vers une application généralisée du concept de lien technologique en développement de produits : Terminologie des associations ». Communication lors de la conférence : 24e Salon International des Systèmes d'Information, Technologies, Méthodologies et Services pour la Conception, la Fabrication et la Gestion du Cycle de vie Produit (MICAD) (Paris, France, 5-7 avril 2005).
Wanjara, P., Booth-Morrison, C., Hsu, E. et Jahazi, M..
2005.
« Process optimization for linear friction welding of Ti-6Al-4V ».
In Trends in welding research : proceedings of the 7th International Conference (Atlanta, GA, USA, May 16-20, 2005)
Coll. « ASM Proceedings of the International Conference: Trends in Welding Research »
pp. 855-860.
ASM International.
Wanjara, P., Brochu, M., Girard, S. et Jahazi, M..
2005.
« Electron beam freeforming on type 321 stainless steel using BNi-2 brazing paste ».
Materials Science and Technology, vol. 21, nº 5.
pp. 613-618.
Wanjara, P., Brochu, M. et Jahazi, M..
2005.
« Ti–6Al–4V electron beam weld qualification using laser scanning confocal microscopy ».
Materials Characterization, vol. 54, nº 3.
pp. 254-262.
Wanjara, P. et Jahazi, M..
2005.
« Linear friction welding of Ti-6Al-4V: Processing, microstructure, and mechanical-property inter-relationships ».
Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol. 36, nº 8.
pp. 2149-2164.
Wanjara, P., Jahazi, M., Monajati, H., Yue, S. et Immarigeon, J. P..
2005.
« Hot working behavior of near-α alloy IMI834 ».
Materials Science and Engineering A, vol. 396, nº 1–2.
pp. 50-60.
Wanjara, P., Monajati, H., Jahazi, M., Germain, L., Bocher, P. et Immarigeon, J.-P..
2005.
« Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ».
In Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005)
pp. 15-26.
Association for Iron and Steel Technology. 2004
Antri, B., Chatelain, Jean-François et Marchand, Françoise.
2004.
« An integrated information model for the dimensional and geometrical inspection of mechanical parts ».
In 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) (Bath, UK, Apr. 5-7, 2004)
p. 43.
Bath, UK : University of Bath.
Bouikni, Nadjib, Desrochers, Alain et Rivest, Louis.
2004.
« Flux de travaux dynamiques pour la gestion des évolutions des Features du produit ».
In Conference International de Mécanique Avancée (CIMA) (Boumerdès, Algérie, 30 nov.-2 déc. 2004)
Brochu, M., Girard, S. et Jahazi, M..
2004.
« Electron beam free forming using brazing paste and solid wires as filler metal ».
In Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004)
pp. 323-334.
Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.
Brunette, J., Jeu-Herault, M., Songmene, Victor et Masounave, Jacques.
2004.
« Understanding and characterizing the drilling of recycled plastics ».
Machining Science and Technology, vol. 8, nº 1.
pp. 141-170.
Cao, X., Xiao, M. et Jahazi, M..
2004.
« Continuous wave Nd: YAG laser welding of ZE41 A-T5 magnesium sand castings: conduction or keyhole mode ».
In Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004)
pp. 187-197.
Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.
Chatelain, Jean-François, Boutin, Y., Marchand, Françoise et Tahan, Antoine.
2004.
« Productivity assessment from advanced integration of canned cycles to CAD/CAM software ».
WSEAS Transactions on Systems, vol. 3, nº 3.
pp. 1187-92.
Fortin, Étienne, Chatelain, Jean-François et Rivest, Louis.
2004.
« An innovative software architecture to improve information flow from CAM to CNC ».
Computers & Industrial Engineering, vol. 46, nº 4.
pp. 655-667.
Fortin, Étienne, Rivest, Louis et Chatelain, Jean-François.
2004.
« Combiner de multiple langages pour la programmation des contrôleurs de machines-outils à architecture ouverte ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 28, nº 3-4.
pp. 511-530.
Jahazi, M. et Hossein-Nejad, S..
2004.
« The development of an optimum manufacturing and material selection process for the fabrication of labyrinth seal strips ».
Journal of Materials Processing Technology, vol. 152, nº 3.
pp. 272-275.
Jalilian, F., Jahazi, M., Drew, R. A. L. et Immarigeon, J-P..
2004.
« The influence of processing parameters on TLP joining of Inconel 617 alloy ».
In 2nd International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues - Honoring William Wallace (Hamilton, ON, Canada, Aug. 22-25, 2004)
pp. 263-274.
Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.
Mashreghi, A. R., Monajatizadeh, H., Jahazi, M. et Yue, S..
2004.
« High temperature deformation of nickel base superalloy Udimet 520 ».
Materials Science and Technology, vol. 20, nº 2.
pp. 161-166.
Monajati, H., Jahazi, M., Bahrami, R. et Yue, S..
2004.
« The influence of heat treatment conditions on gamma characteristics in Udimet 720 ».
Materials Science and Engineering A, vol. 373, nº 1-2.
pp. 286-293. Tahan, Antoine, Songmene, Victor et Chatelain, Jean-François. 2004. « Case study of the application of statistical tolerances taking account of correlation ». Communication lors de la conférence : International Conference on Computers and Industrial Engineering (San Francisco, CA, USA, Nov., 2004). 2003Amtout, Y., Songmene, Victor et Chatelain, Jean-François. 2003. « Optimisation de trajectoires d'outils en FAO pour l'usinage à haute performance des moules en P20 ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003). Chatelain, Jean-François. 2003. « Laboratoire d'ingénierie des produits, procédés et systèmes de l'ÉTS ». Communication lors de la conférence : 3e Journée d'Étude Interinstitutionnelle du Centre de Recherche en Fabrication Haute Performance (Bécancour, QC, Canada, 21 nov. 2003). Chatelain, Jean-François et Boutin, Y.. 2003. « Intégration de cycles d'usinage avancés aux logiciels de CFAO ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003).
Germain, L., Gey, N., Humbert, M., Bocher, P. et Jahazi, M..
2003.
« Texture and microtexture analysis of an IMI 834 alloy after thermo-mechanical processing ».
In Ti-2003 Science and Technology : proceedings of the 10th World Conference on Titanium held at the CCH-Congress Center Hamburg, Germany, 13-18 July 2003 (Hamburg, Germany, July 13-18, 2003)
pp. 1283-1290.
Weinheim, Allemagne : Wiley-VCH.
Giguère, F., Rivest, Louis et Desrochers, Alain.
2003.
« Improving design productivity and product data consistency ».
In Feature Based Product Life-Cycle Modelling : IFIP TC5 / WG5.2 & WG5.3 Conference on Feature Modelling and Advanced Design-for-the-Life-Cycle Systems (FEATS 2001) June 12–14, 2001, Valenciennes, France (Valenciennes, France, June 12-14, 2001)
Coll. « IFIP — The International Federation for Information Processing », vol. 109.
pp. 77-91.
Norwell, MA, USA : Springer.
Jahazi, M., Samadi, A. et Yue, S..
2003.
« Determination of the optimum forging conditions for a 7075 aluminum alloy ».
In Light metals 2003 = Métaux légers : proceedings of the International Symposium on Light Metals 2003 Métaux légers (Vancouver, BC, Canada, Aug. 25-28, 2003)
pp. 433-444.
[Canadian Institute of Mining, Metallurgy and Petroleum]. Marguerit, L., Balazinski, M. et Songmene, Victor. 2003. « Drilling of MMC : influence of cutting conditions on part roughness and form error ». Communication lors de la conférence : CIRP Workshop (Paris, France, Jan., 2003). 2002Boutin, Y. et Chatelain, Jean-François. 2002. « Intégration des cycles d'usinage avancés aux logiciels de FAO ». Communication lors de la conférence : Séminaire sur l'Usinage à Grande Vitesse (Longueuil, QC, Canada, sept. 2002).
Chatelain, Jean-François et Fortin, C..
2002.
« Optimal workpiece localization for machining applications ».
In
Integrated design and manufacturing in mechanical engineering.
pp. 247-254. USA : Kluwer Academic Publishers.
Chatelain, Jean-François et Fortin, C..
2002.
« Optimal workpiece localization for machining applications ».
In 3rd Integrated Design and Manufacturing in Mechanical Engineering Conference (Montreal, Canada, May, 2000)
pp. 247-254.
Netherlands : Springer-Verlag.
Chatelain, Jean-François, Maranzana, Roland et St-Martin, Serge.
2002.
« A solid model comparison approach based on a model tree analysis ».
In
Advances in systems theory, mathematical methods and applications.
pp. 239-244. WSEAS Press.
Chatelain, Jean-François, Maranzana, Roland et St-Martin, Serge.
2002.
« A solid model comparison approach based on a model tree analysis ».
In 4th WSEAS International Conference on Mathematics and Computers in Physics (MCP) (Cancun, Mexico, May 12-16, 2002)
WSEAS.
Giguere, F., Rivest, Louis, Desrochers, Alain et Maranzana, Roland.
2002.
« Les caractéristiques contextuelles : une solution pour accroître la productivité en CAO : De la CAO géométrique vers une CAO fonctionnelle ».
Revue internationale de CFAO et d'informatique graphique, vol. 17, nº 1-2.
pp. 105-122.
Jahazi, M. et Jonas, J. J..
2002.
« The non-equilibrium segregation of boron on original and moving austenite grain boundaries ».
Materials Science and Engineering A, vol. 335, nº 1-2.
pp. 49-61.
Jahazi, M. et Mashreghi, A. R..
2002.
« Dissolution and precipitation kinetics of γ' in nickel base superalloy Udimet 520 ».
Materials Science and Technology, vol. 18, nº 4.
pp. 458-462.
Rivest, Louis.
2002.
« Computer-aided design of aerospace components tools and implementation ».
In ASEE Annual Conference and Exposition: Vive L'ingenieur (Montreal, Canada, June 16-19, 2002)
pp. 8567-8574.
Washington, DC, USA : American Society for Engineering Education. Rivest, Louis, Maranzana, Roland et Desrochers, A.. 2002. « Maintaining data consistency through integrated product process change management ». Communication lors de la conférence : 3rd Annual AIAC Aerospace Technology Collaboration Forum (Montreal, QC, Canada, May 1-2, 2002).
Songmene, Victor, Balout, Bahaa et Masounave, Jacques.
2002.
« Drilling of metal matrix composites : cutting forces and chip formation ».
In International Symposium on Enabling Technologies for Light Metals and Composite Materials and their End-Products (Montreal, QC, Canada, Aug. 11-14, 2002)
pp. 633-651.
Canada : Canadian Institute of Mining, Metallurgy and Petroleum.
Songmene, Victor, Jeu-Herault, M., Côté, M., Duval, M. et Masounave, Jacques.
2002.
« Généralités sur l'aluminium dans les alliages d'aluminium moulés : connaissances et pratiques ».
CQRDA, CTIF. 2001Bouikni, N., Desrochers, A. et Rivest, Louis. 2001. « Réalisation d'une architecture multi-vues pour la CAO appliquée au domaine de l'aéronautique ». Communication lors de la conférence : 69e Congrès de l'ACFAS (Sherbrooke, QC, Canada, 14-17 mai 2001). Bouikni, N., Desrochers, A. et Rivest, Louis. 2001. « Élaboration d'une architecture multi-vues en CAO appliquée au domaine de l'aéronautique ». Communication lors de la conférence : Colloque IMSI 2001 (Sherbrooke, QC, Canada, 2001).
Chatelain, Jean-François et Fortin, C..
2001.
« Balancing technique for optimal blank part machining ».
Precision Engineering, vol. 25, nº 1.
pp. 13-23.
Fortin, Étienne, Chatelain, Jean-François et Rivest, Louis.
2001.
« Improving information flow from CAM to CNC : an innovative architecture based on BNCL virtual machine ».
In 29th International Conference on Computers and Industrial Engineering (Montreal, QC, Canada, Nov. 1-3, 2001)
Montreal, Canada : École de technologie supérieure.
Jahazi, M. et Eghbali, B..
2001.
« The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels ».
Journal of Materials Processing Technology, vol. 113.
pp. 594-598.
Jahazi, M., Khodabandeh, A. et Aghdashi, S. T..
2001.
« A method to improve the toughness of forged microalloyed steels ».
In Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)
pp. 3-10.
Shafie, F. K., Jahazi, M. et Abassi, M..
2001.
« Influence of temperature and percent reduction on aging behavior of T-250 Maraging Steel ».
In Proceedings of 4th International Conference on Surface Modifications and Heat Treatment (Isphahan, Iran, May 20-23, 2001)
pp. 434-441.
Shafie, F. K., Jahazi, M., Kharazi, Y. et Abassi, M..
2001.
« Thermomechanical processing of T-250 maraging steel ».
In Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)
pp. 41-48.
St-Martin, S., Chatelain, Jean-François, Rivest, Louis et Maranzana, Roland.
2001.
« L'évolution du modèle produit dans un contexte de SGDT: Vers la maîtrise du changement dans les modèles CAO ».
In 20e congrès international de la CFAO et des nouvelles technologies de conception et de fabrication (MICAD 2001) (Paris, France, 6-8 mars 2001)
2000
Aghdashi, S. T., Khodabandeh, A. et Jahazi, M..
2000.
« The determination of optimum forging condiions for a vanadium containing microalloyed steel ».
In The Fourth International Conference on HSLA Steels October 30-November 2, 2000, Xi'an, China (Beijing, China, Oct. 30-Nov. 2, 2000)
pp. 404-409.
The chinese society for metals.
Chatelain, Jean-François et Fortin, C..
2000.
« Algorithme de localisation des pièces brutes pour l'usinage ».
In 3e conférence internationale sur la conception et la fabrication intégrées en mécaniques IDMME 2000 et Forum SCGM 2000 (Montréal, QC, Canada, Mai 2000)
pp. 1-10.
Hossein Nedjad, S. et Jahazi, M..
2000.
« Failure analysis and manufacturing technology of seal strips ».
In Proceedings of the 4th International Manufacturing Conference (Tehran, Iran
pp. 285-292.
Jahazi, M. et Ebrahimi, G..
2000.
« Influence of flow-forming parameters and microstructure on the quality of a D6ac steel ».
Journal of Materials Processing Technology, vol. 103, nº 3.
pp. 362-366.
Jahazi, M. et Egbali, B..
2000.
« Influence of hot rolling parameters on the microstructure and mechanical properties of an ultra-high strength steel ».
Journal of Materials Processing Technology, vol. 103, nº 2.
pp. 276-279.
Jahazi, Mohammad et Ghomi, M..
2000.
« Texture evolution in two deep drawn aluminum alloys ».
In J.J. Jonas Symposium on Thermomechanical Processing of Steel: August 20-23, 2000, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Aug. 20-23, 2000)
pp. 707-713.
Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.
Macabies, L., Desrochers, A., Rivest, L. et Maranzana, Roland.
2000.
« Liens multi-modèles en CAO: application au rivetage en aéronautique ».
In IDMME' 2000 (Montréal, QC, Canada, 16-19 mai 2000)
Montréal, QC, Canada : Presses internationales Polytechnique. Maranzana, Roland, Rivest, Louis et Chatelain, Jean-François. 2000. « Systèmes de CAO et ingénierie concourante : les effets pervers ». Communication lors de la conférence : Université d'Été de Recherche Francophone, Ingénierie Simultanée et Concourante (ISC 2000) (Arc-et-Senans, France, 3-5 juil. 2000).
Monajati, H., Jahazi, M. et Hosseini, H..
2000.
« A computer code for the evaluation of the residual life of different boiler components ».
In Proceedings of 15th International Power Engineering Conference (Tehran, Iran, June 18-22, 2000)
pp. 223-231.
Rivest, L., Rompala, S., Bourgeois, Y., Tessier, C. et Bagshaw, P..
2000.
« Computer simulation helps produce complex composite parts for Canadair Jets ».
CAD Systems, vol. 18, nº 7.
pp. 14-15.
Rivest, Louis, Rompala, Steve et Bourgeois, Yvon.
2000.
« Software helps build a better composite part ».
Machine Design, vol. 72, nº 10.
pp. 90-92.
Samadi, A. et Jahazi, M..
2000.
« The determination of optimum heat treatment conditions for the forging of a 7075 Al alloy ».
In Proceedings of the Second Non-Ferrous Metallurgy Congress, 9-11 May 2000, Univ. of Kerman, Iran (Kerman, Iran, May 9-11, 2000)
pp. 703-712.
Songmene, Victor. 2000. « Usinage des composites à matrice d'alliage d'aluminium GrA-Ni ». Thèse de doctorat. Montréal, École Polytechnique de Montréal, 200 p. 1999
Chatelain, Jean-François et Fortin, C..
1999.
« A CAD/CAM integrated balancing system for blank part machining ».
In Troisième conférence internationale sur l'automatisation industrielle, École de technologie supérieure, Montréal, 7-9 juin 1999 : actes de la conférence = Third International Conference on Industrial Automation, École de technologie supérieure, Montréal, (Montreal, Canada, June 7-9, 1999)
23/9-23/12.
Montreal, Canada : International Association of Industrial Automation.
Jahazi, M. et Jalilian, F..
1999.
« The influence of thermochemical treatments on interface quality and properties of copper/carbon-fibre composites ».
Composites Science and Technology, vol. 59, nº 13.
pp. 1969-1975. 1998Chatelain, Jean-François. 1998. « Alignement imposé des points de mesure dans les zones de modèles solides pour la vérification des tolérances géométriques ». Communication lors de la conférence : Forum sur la Métrologie 98 (Laval, QC, Canada, nov. 1998).
Chatelain, Jean-François.
1998.
« Constrained alignment of measurement data within CAD solid zones for geometric tolerance verification ».
In Actes du Forum Métrologie 98 (Québec, QC, Canada, nov. 1998)
Québec, QC, Canada : Université Laval.
Fortin, Clément, Aubin, Carl-Éric, Salako, F., Côté, B., Gamache, C. et Rivest, Louis.
1998.
« Introduction à l'utilisation du logiciel CATIA ».
Montréal, Canada : École polytechnique.
Jahazi, M..
1998.
« The influence of thermomechanical treatment on the microstructure and mechanical properties of aisi 4130 steel ».
Metals and Materials, vol. 4, nº 4.
pp. 818-822.
Jahazi, M. et Ebrahimi, G..
1998.
« Flow localization during the forming of an ultra high strength steel ».
In Proceedings of the Sixth Annual ISME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)
pp. 1445-1452.
Monajati, H. et Jahazi, M..
1998.
« Residual life evaluation of critical boiler parts ».
In Proceedings of the International IME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)
pp. 757-767.
Rivest, L..
1998.
« The digital implementation at bombardier aerospace : the next stretch ».
CATIA Solutions magazine, vol. 2, nº 6.
pp. 42-43. 1997
Jahazi, M. et Ghomi, M..
1997.
« Microstructural evolution and formability in two aluminium alloys ».
In Proceedings of the Fifth Annual ISME Conference, Tabriz University, Tabriz, Iran, May 4-6, 1997 (Tabriz, Iran, May 4-6, 1997)
pp. 757-767.
Jahazi, M. et Goudarzi, M..
1997.
« The influence of thermomechanical parameters on the earing behaviour of 1050 and 1100 aluminium alloys ».
Journal of Materials Processing Technology, vol. 63.
pp. 610-613.
Jahazi, M. et Samadi, A..
1997.
« The influence of quench parameters on the microstructure and toughness of AISI 4130 steel ».
In Proceedings of the International IME Conference, Tehran, Iran, 1997 (Tehran, Iran, 1997)
pp. 195-202.
1995
Goudarzi, M., Jahazi, M. et Fallahi, A..
1995.
« The influence of recrystallization temperature on the earing of a 1100 aluminum alloy ».
In Proceedings of the International Manufacturing Conference (Tehran, Iran, 1995)
pp. 179-186.
Jahazi, M. et Hosseinpour, M..
1995.
« Fracture surface analysis of a welded ultra high strength steel ».
The Metallurgist, vol. 3.
pp. 10-17.
Jahazi, M. et Jalilian, F..
1995.
« The determination of optimum fiber surface treatment for the production of Cu-Gr composites ».
In Proceedings of the Conference on Composites Materials (Tokyo, Japan, June 26, 1995)
pp. 220-228.
Japan Society of Mechanical Engineers.
Jahazi, M. et Jalilian, F..
1995.
« The influence of chemical treatments on the interface quality and physical properties of copper-graphite composites ».
In Proceedings of the Tenth International Conference on Composite Materials : Whistler, British Columbia, Canada, August 14th-18th, 1995 (Whistler, BC, Canada, Aug. 14-18, 1995)
pp. 439-446.
1994Balazinksi, Marek et Songméné, Victor. 1994. « Fraisage de l'Inconel 600 à avance variable ». Communication lors de la conférence : 62e Congrès de l'ACFAS (Montréal, QC, Canada, 16-20 mai 1994).
Hosseinpour, M. et Jahazi, M..
1994.
« Optimum welding of AISI 4130 steel ».
In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
pp. 214-221.
Hosseinpour, M. et Jahazi, M..
1994.
« The influence of welding parameters on the HAZ microstructure of an ultra high strength steel ».
In International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94) : 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
pp. 120-127.
Jalilian, F. et Jahazi, M..
1994.
« The effect of surface treatments on the physical behavior of copper-graphite composites ».
In International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94): 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
pp. 326-334.
Jalilian, F., Sedghi, A. et Jahazi, M..
1994.
« The influence of carbon fiber surface treatment on the mechanism of copper growth ».
In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
pp. 269-274.
Sadeghi, H., Shariati, M. et Jahazi, M..
1994.
« A computer code for the prediction of forming steps in precision forging ».
In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
pp. 167-174.
1993
Akmoulin, I. A., Djahazi, M., Buravova, N. D. et Jonas, J. J..
1993.
« Superplastic forging procedures for manufacture of ceramic yttria stabilised tetragonal zirconia products ».
Materials Science and Technology, vol. 9, nº 1.
pp. 26-33.
Rivest, Louis, Fortin, C. et Desrochers, Alain.
1993.
« Tolerance modeling for 3D analysis – presenting a kinematic formulation ».
In Proceedings of 3rd CIRP seminars on computer aided tolerancing = Tolérancement géométrique (Cachan, France, Apr. 27-28, 1993)
pp. 51-74.
Paris, France : Éditions Eyrolles.
Tahan, S. A., Kamwa, I., Viarouge, P. et Ferfra, M..
1993.
« A generalized model of satured synchronous machines ».
In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993)
pp. 585-590.
International Association for Mathematics and Computers in Simulation.
Tahan, S. A., Kamwa, I., Viarouge, P., Ferfra, M. et Le-Huy, H..
1993.
« Identification of solid-rotor asynchronous-machine parameters from standstill tests in the time domain using nonlinear techniques ».
In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993)
pp. 603-608.
International Association for Mathematics and Computers in Simulation. 1992
Djahazi, M., He, X. L., Jonas, J. J. et Sun, W. P..
1992.
« Influence of boron on nature and distribution of strain induced precipitates in (Ti,Nb) high strength low alloy steels ».
Materials Science and Technology, vol. 8, nº 7.
pp. 628-636.
Djahazi, M., He, X. L., Jonas, J. J. et Sun, W. P..
1992.
« Nb(C, N) Precipitation and Austenite Recrystallization in Boron-containing high-strength low-alloy steels ».
Metallurgical transactions. A, Physical metallurgy and materials science, vol. 23 A, nº 8.
pp. 2111-2120.
Jalilian, F., Sedghi, A. et Jahazi, M..
1992.
« The influence of chemical surface treatment on the wettability of carbon fibers ».
In Proceedings of the International Confrence on Tribology (Isfahan, Iran, 1992)
pp. 333-349.
1991
Akmoulin, A., Djahazi, M. et Jonas, J. J..
1991.
« Effect of initial porosity on the superplastic behavior of Y-TZP in vacuum ».
In Superplasticity in advanced materials: proceedings of the International Conference on Superplasticity in Advanced Materials held in Osaka, Japan, June 3-6, 1991 (Osaka, Japan, June 3-6, 1991)
pp. 233-239.
Tokyo, Japan :
Akmoulin, I. A., Djahazi, M. et Jonas, J. J..
1991.
« Enhanced deformation behavior of incompletely sintered Y-TZP zirconia ».
Scripta metallurgica et materialia, vol. 25, nº 5.
pp. 1035-1040.
He, X. L., Djahazi, M., Jonas, J. J. et Jackman, J..
1991.
« The non-equilibrium segregation of boron during the recrystallization of Nb-treated HSLA steels ».
Acta Metallurgica et Materialia, vol. 39, nº 10.
pp. 2295-2308. Tahan, Souheil-Antoine, El Chebair, Abdallah et Dickinson, John. 1991. « Étude théorique de la stabilité des coques cylindriques soumises à un écoulement axial ». Communication lors de la conférence : 59e congrès de l'ACFAS (Sherbrooke, QC, Canada, 21-24 mai 1991). 1990
Djahazi, M., He, X. L. et Jonas, J. J..
1990.
« Acceleration of Nb(C, N) precipitation in HSLA steels by boron addition ».
In HSLA steels, processing, properties and applications: proceedings of the Second International Conference on HSLA Steels October 28th-November 2nd, 1990, Beijing, China (Beijing, China, Oct. 28-Nov. 2, 1990)
pp. 230-238.
Djahazi, M., He, X. L., Jonas, J. J. et Collins, L..
1990.
« The effect of Nb and b on austenite recrystallization ».
In Recrystallization '90: International Conference on Recrystallization in Metallic Materials: conference proceedings (Wollongong, Australia, Jan. 22-26, 1990)
pp. 681-687.
TMS (The Minerals, Metals & Materials Society). 1988
Djahazi, M., He, X. L. et Jonas, J. J..
1988.
« Effect of boron on the kinetics of precipitation in deformed austenite ».
In Thermec-88: International Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals: proceedings, June 6-10, 1988, Keidanren Kaikan, Tokyo, Japan (Tokyo, Japan, June 6-10, 1988)
pp. 246-253.
Iron and Steel Institute of Japan.
Djahazi, M., He, X. L., Jonas, J. J. et Ruddle, G. E..
1988.
« Influence of boron distribution on recrystallization and precipitation in a Nb-Ti HSLA steel ».
In Processing, microstructure, and properties of HSLA steels: proceedings of an International Symposium on Processing, Microstructure, and Properties of HSLA Steels (Pittsburgh, PA, USA, Nov. 3-5, 1987)
pp. 69-78.
1987
Djahazi, M., He, X. L. et Jonas, J. J..
1987.
« Effect of boron on the precipitation of carbonitrides in a Nb-Ti HSLA steel ».
In 29th Mechanical Working and Steel Processing Conference: proceedings (Toronto, ON, Canada, Oct. 21-23, 1987)
pp. 403-408.
|
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau