| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Documents publiés en 2018Nombre de documents archivés : 1458.
Abari, Ibtissem, Hamouda, Mahmoud, Ben Hadj Slama, Jaleleddine et Al-Haddad, Kamal.
2018.
« Single switch open-circuit fault detection for three-level NPC inverter using conducted emissions signature ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 1489-1494.
IEEE.
Abari, Ibtissem, Lahouar, Ali, Hamouda, Mahmoud, Ben Hadj Slama, Jaleleddine et Al-Haddad, Kamal.
2018.
« Fault detection methods for three-level NPC inverter based on DC bus electromagnetic signatures ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 7.
pp. 5224-5236.
Abarzadeh, Mostafa et Al-Haddad, Kamal.
2018.
« An improved model predictive controller for five-level active-neutral-point-clamped converter ».
In 2018 IEEE Electrical Power and Energy Conference (EPEC) (Toronto, ON, Canada, Oct. 10-11, 2018)
Institute of Electrical and Electronics Engineers Inc..
Abarzadeh, Mostafa, Al-Haddad, Kamal et Dehbozorgi, M. Reza.
2018.
« Deadbeat predictive direct power control of neutral-point-clamped converter based active front end rectifier for more electric aircraft applications ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 5739-5744.
Piscataway, NJ, USA : IEEE.
Abarzadeh, Mostafa, Vahedi, Hani, Al-Haddad, Kamal et Dehbozorgi, M. Reza.
2018.
« Sensor-less logic-equation-based modualtion method for grid-connected PUC5 converter ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 4486-4491.
Piscataway, NJ, USA : IEEE.
Abasian, Foroogh, Ronnqvist, Mikael et Ouhimmou, Mustapha.
2018.
« Forest bioenergy network design under uncertainty ».
In 7th International Conference on Information Systems, Logistics and Supply Chain (ILS 2018) (Lyon, France, July 08-11, 2018)
pp. 94-104.
INSA Lyon. Abattan Spéro, F. A., Lavoué, J., Hallé, S., Drolet, D., Eddy Ryan, P. et Debia, M.. 2018. « Évaluation de la performance de prédiction de deux modèles d’estimation de l’exposition en environnement contrôlé ». Communication lors de la conférence : 40e Congrès Annuel de l'AQHSST (Saguenay, QC, Canada, 16-18 mai, 2018).
Abdedou, Azzedine et Soulaimani, Azzeddine.
2018.
« Uncertainty quantification using a new non intrusive stochastic approach: application to the establishment of inundation maps due to dam break flows ».
In IRF2018: Proceedings of the 6th International Conference on Integrity-Reliability-Failure (Lisbon, Portugal, July 22-29, 2018)
pp. 1103-1104.
Inegi-Inst Engenharia Mecanica E Gestao Industrial.
Abdellatif, Manel, Hecht, Geoffrey, Mili, Hafedh, El boussaidi, Ghizlane, Moha, Naouel, Shatnawi, Anas, Privat, Jean et Guéhéneuc, Yann-Gaël.
2018.
« State of the practice in service identification for SOA migration in industry ».
In Service-Oriented Computing : 16th International Conference, ICSOC 2018 (Hangzhou, China, Nov. 12-15, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11236.
pp. 634-650.
Springer. Abdolmanafi, Atefeh et Duong, Luc. 2018. « Characterization of coronary artery tissues in Kawasaki Disease using Optical Coherence Tomography (OCT) imaging ». Communication lors de la conférence : 12th International Kawasaki Disease Symposium (Yokohama, Japan, June 12-15, 2018).
Abdolmanafi, Atefeh, Duong, Luc, Dahdah, Nagib, Adib, Ibrahim Ragui et Cheriet, Farida.
2018.
« Characterization of coronary artery pathological formations from OCT imaging using deep learning ».
Biomedical Optics Express, vol. 9, nº 10.
pp. 4936-4960.
Abo El Ezz, Ahmad, Nollet, Marie-José, McGrath, Heather et Nastev, Miroslav.
2018.
« Framework for seismic vulnerability of highway bridge networks ».
In 6th International Disaster Mitigation Specialty Conference 2018, Held as Part of the Canadian Society for Civil Engineering Annual Conference 2018 (Fredericton, NB, Canada, June 13-16, 2018)
pp. 139-145.
Canadian Society for Civil Engineering.
Abuashour, Ahmad et Kadoch, Michel.
2018.
« An enhanced control overhead messages reduction algorithm in VANET ».
In 2018 IEEE 6th International Conference on Future Internet of Things and Cloud (FiCloud) (Barcelona, Spain, Aug. 06-08, 2018)
pp. 275-281.
IEEE Computer Society.
Abuashour, Ahmad et Kadoch, Michel.
2018.
« Control overhead reduction in cluster-based VANET routing protocol ».
In Ad Hoc Networks : 9th International Conference, AdHocNets 2017 (Niagara Falls, ON, Canada, Sept. 28-29, 2017)
Coll. « Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering », vol. 223.
pp. 106-115.
Springer.
Abuashour, Ahmad et Kadoch, Michel.
2018.
« Passive CH election avoidance protocol and CH routing protocol in VANET ».
In IEEE International Conference on Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData) (Halifax, NS, Canada, July 30-Aug. 03, 2018)
pp. 1753-1758.
Institute of Electrical and Electronics Engineers Inc..
Abuzied, Muftah, Hamadi, Abdelhamid, Ndtoungou, Auguste, Rahmani, Salem et Al-Haddad, Kamal.
2018.
« Sliding mode control of three-phase series hybrid power filter with reduced cost and rating ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 1495-1500.
Piscataway, NJ, USA : IEEE.
Acher, Mathieu, Lopez-Herrejon, Roberto E. et Rabiser, Rick.
2018.
« Teaching software product lines: A snapshot of current practices and challenges ».
In 22nd International Systems and Software Product Line Conference (SPLC 2018) (Gothenburg, Sweden, Sept. 10-14, 2018)
p. 249.
New York, NY : ACM. Acher, Mathieu, Rabiser, Rick et Lopez-Herrejon, Roberto E.. 2018. « SPLTea 2018: Third international workshop on software product line teaching ». Communication lors de la conférence : 22nd International Systems and Software Product Line Conference (SPLC 2018) (Gothenburg, Sweden, Sept. 10-14, 2018).
Addali, Khaled M. et Kadoch, Michel.
2018.
« Matching game-based user association approach for LTE-A mobile relay systems ».
In 2018 IEEE Canadian Conference on Electrical & Computer Engineering (CCECE) (Québec, QC, Canada, May 13-16, 2018)
IEEE.
Adibi, Arash, Isapour, Aria, Niayesh, Mohsen et Kouki, Ammar.
2018.
« Ceramic interposers for ultra-high density packaging and 3D circuit integration ».
In IEEE 20th Electronics Packaging Technology Conference (EPTC) (Singapore, Singapore, Dec. 4-7, 2018)
pp. 13-16.
Piscataway, NJ, USA : IEEE.
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2018.
« Tool condition monitoring using spectral subtraction algorithm and artificial intelligence methods in milling process ».
International Journal of Mechanical Engineering and Robotics Research, vol. 7, nº 1.
pp. 30-34.
Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc.
2018.
« Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 9-12.
pp. 3217-3227.
Agnard, Stéphane, Hazel, Bruce et Liu, Zhaoheng.
2018.
« Study of grinding tool profiling for robotic processes ».
Machining Science and Technology, vol. 22, nº 2.
pp. 203-224.
Agomma, Roseline Olory, Vázquez, Carlos, Cresson, Thierry et De Guise, Jacques.
4 juillet 2018.
« Assister les chirurgiens au moyen de l’intelligence artificielle ».
[Article de recherche]. Substance ÉTS.
Agomma, Roseline Olory, Vázquez, Carlos, Cresson, Thierry et De Guise, Jacques.
4 juillet 2018.
« Assisting Surgeons with Artificial Intelligence ».
[Article de recherche]. Substance ÉTS.
Ahmad, Ola, Lombaert, Herve, Parent, Stefan, Labelle, Hubert et Cheriet, Farida.
2018.
« Spectral shape analysis of human torsos: Application to the evaluation of scoliosis surgery outcome ».
IEEE Journal of Biomedical and Health Informatics, vol. 22, nº 5.
pp. 1552-1560.
Aidi, Saifeddine, Zhani, Mohamed Faten et Elkhatib, Yehia.
2018.
« On improving service chains survivability through efficient backup provisioning ».
In 14th International Conference on Network and Service Management (CNSM) (Rome, Italy, Nov. 5-9, 2018)
pp. 108-115.
Piscataway, NJ, USA : IEEE.
Aidibe, A., Tahan, A. et Brailovski, V..
2018.
« A novel industrial test artifact for the evaluation of dimensional capabilities of metallic additive manufacturing systems ».
In Proceedings of the European Powder Metallurgy Association (EPMA) : Euro PM2018 (Bilbao, Spain, Oct. 14-18, 2018)
European Powder Metallurgy Association (EPMA).
Aïvodji, U. M., Huguet, M. J., Huguenin, K. et Killijian, M. O..
2018.
« SRide: A privacy-preserving ridesharing system ».
In WiSec 2018 - Proceedings of the 11th ACM Conference on Security and Privacy in Wireless and Mobile Networks (Stockholm, Sweden, June 18-20, 2018)
pp. 40-50.
Association for Computing Machinery, Inc.
Al Hawi, Tariq, Alsyouf, Imad et Gardoni, Mickael.
2018.
« Innovation models for public and private organizations: A literature review ».
In 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Bangkok, Thailand, Dec. 16-19, 2018)
pp. 565-569.
IEEE.
Al Rammal, Zeina, Abou Daher, Nivine, Kanaan, Hadi, Mougharbel, Imad et Saad, Maarouf.
2018.
« Optimal PMU placement for reverse power flow detection ».
In 2018 4th International Conference on Renewable Energies for Developing Countries (REDEC) (Beirut, Lebanon, Nov. 1-2, 2018)
IEEE.
Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane.
2018.
« Experimental investigation of the cooling capacity of gaseous carbon dioxide in free jet expansion for use in portable air-cooling systems ».
Open Journal of Applied Sciences, vol. 8, nº 2.
pp. 62-72.
Aladin, Sandra et Tremblay, Christine.
2018.
« Cognitive tool for estimating the QoT of new lightpaths ».
In Optical Fiber Communication Conference (OFC 2018) (San Diego, CA, USA, Mar. 11-15, 2018)
OSA publishing.
Alam, Md Sahabul, Kaddoum, Georges et Agba, Basile L..
2018.
« Bayesian MMSE estimation of a gaussian source in the presence of bursty impulsive noise ».
IEEE Communications Letters, vol. 22, nº 9.
pp. 1846-1849.
Alam, Md Sahabul, Kaddoum, Georges et Agba, Basile L..
2018.
« Performance analysis of distributed wireless sensor networks for gaussian source estimation in the presence of impulsive noise ».
IEEE Signal Processing Letters, vol. 25, nº 6.
pp. 803-807.
Alameh, Abdul Hafiz, Gratuze, Mathieu, Elsayed, Mohannad Y. et Nabki, Frederic.
2018.
« Effects of proof mass geometry on piezoelectric vibration energy harvesters ».
Sensors, vol. 18, nº 5.
Alameh, Abdul Hafiz, Gratuze, Mathieu, Robichaud, Alexandre et Nabki, Frederic.
2018.
« Study and design of MEMS cross-shaped piezoelectric vibration energy harvesters ».
In 25th IEEE International Conference on Electronics, Circuits and Systems (ICECS) (Bordeaux, France, Dec. 09-12, 2018)
pp. 305-308.
Piscataway, NJ, USA : IEEE.
Alavi, Seyyed Hossein et Jabbarzadeh, Armin.
2018.
« Supply chain network design using trade credit and bank credit: A robust optimization model with real world application ».
Computers and Industrial Engineering, vol. 125.
pp. 69-86. Alchalabi, Bilal, Faubert, Jocelyn et Labbé, David. 2018. « Can we use EEG to measure the ownership illusion of a walking self-avatar? ». Affiche présentée lors de la conférence : Scientific Day REPAR-INTER (Quebec, QC, Canada, May 11, 2018).
Alchalabi, Bilal, Labbé, David et Faubert, Jocelyn.
2018.
« How does the brain encode the ownership illusion of a walking self-avatar ».
In 23rd Annual CyberPsychology, CyberTherapy & Social Networking Conference (CyPsy) (Gatineau, QC, Canada, June 26-28, 2018)
Al-Haddad, Kamal, Gregoire, Luc-André et Ounejjar, Youssef (inventeurs) 13 février 2018. « Multilevel electric power converter ». Ecole de technologie supérieure (titulaire(s)). Brevet canadien CA 2743085. [Titre traduit: Convertisseur de courant électrique multiniveau].
Ali, Ahmed H., Mohamed, Hamdy M., Chaallal, Omar, Benmokrane, Brahim et Ghrib, Faouzi.
2018.
« Shear resistance of RC circular members with FRP discrete hoops versus spirals ».
Engineering Structures, vol. 174.
pp. 688-700.
Alinejad, Yasaman, Adoungotchodo, Atma, Hui, Eve, Zehtabi, Fatemeh et Lerouge, Sophie.
2018.
« An injectable chitosan/chondroitin sulfate hydrogel with tunable mechanical properties for cell therapy/tissue engineering ».
International Journal of Biological Macromolecules, vol. 113.
pp. 132-141.
Alkayyali, Tartela, Haltli, Bradley, Kerr, Russell G. et Ahmadi, Ali.
2018.
« A microbial domestication pod for the discovery of natural products ».
In 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Kaohsiung, Taiwan, Nov. 11-15, 2018)
pp. 1707-1710.
Chemical and Biological Microsystems Society.
Allogba, Stéphanie et Tremblay, Christine.
2018.
« K-Nearest neighbors classifier for field bit error rate data ».
In 2018 Asia Communications and Photonics Conference (ACP) (Hangzhou, China, Oct. 26-29, 2018)
IEEE.
Allogba, Stéphanie et Tremblay, Christine.
2018.
« Statistical analysis of performance monitoring data collected in an optical link ».
In 2018 Photonics North (PN) (Montreal, QC, Canada, June 05-07, 2018)
Almadwi, Fathi S. et Assaf, Gabriel J..
2018.
« Performance testing of paving mixes for libya’s hot and arid conditions, using marshall stability and SUPERPAVE gyratory compactor methods ».
In Advancement in the Design and Performance of Sustainable Asphalt Pavements : Proceedings of the 1st GeoMEast International Congress and Exhibition, Egypt 2017 on Sustainable Civil Infrastructures (Sharm El Sheikh, Egypt, July 15-19, 2017)
Coll. « Sustainable Civil Infrastructures »
pp. 313-323.
Cham, Switzerland : Springer International Publishing.
Almeida, Francisco, Assuncao, Marcos D., Barbosa, Jorge, Blanco, Vicente, Brandic, Ivona, Da Costa, Georges, Dolz, Manuel F., Elster, Anne C., Jarus, Mateusz, Karatza, Helen D., Lefevre, Laurent, Mavridis, Ilias, Oleksiak, Ariel, Orgerie, Anne-Cecile et Pierson, Jean-Marc.
2018.
« Energy monitoring as an essential building block towards sustainable ultrascale systems ».
Sustainable Computing: Informatics and Systems, vol. 17.
pp. 27-42.
Almeida, Paulo R. L., Oliveira, Luiz S., Britto, Alceu S. et Sabourin, Robert.
2018.
« Adapting dynamic classifier selection for concept drift ».
Expert Systems with Applications, vol. 104.
pp. 67-85.
Alomari, A., April, A., Monsalve, C. et Gawanmeh, A..
2018.
« Integrating a decision tree perspective at the operational level of BPM+ ».
Computer Systems Science and Engineering, vol. 33, nº 3.
pp. 219-227.
Alqaisi, Walid, Brahmi, Brahim, Ghommam, Jawhar, Saad, Maarouf et Nerguizian, Vahé.
2018.
« Multivariable super-twisting control in a vision-based quadrotor utilized in agricultural application ».
In 2018 IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA 2018) (Ottawa, ON, Canada, June 12-16, 2018)
IEEE.
Alqaisi, Walid, Brahmi, Brahim, Ghommam, Jawhar, Saad, Maarouf et Nerguizian, Vahé.
2018.
« Sliding mode controller and hierarchical perturbation compensator in a UAV quadrotor ».
In 2018 IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA 2018) (Ottawa, ON, Canada, June 12-13, 2018)
IEEE.
Alzaareer, Khaled et Saad, Maarouf.
2018.
« Real-time voltage stability monitoring in smart distribution grids ».
In 2018 IEEE International Conference on Renewable Energy and Power Engineering (REPE) (Toronto, ON, Canada, Nov. 24-26, 2018)
pp. 13-17.
Piscataway, NJ, USA : IEEE.
Amabili, M., Breslavskyi, I., Balasubramanian, P., Ferrari, G. et Tubaldi, E..
2018.
« Viscoelastic characterization of woven Dacron with direction-dependent quasi-linear viscoelasticity ».
In 8th World Congress of Biomechanics (Dublin, Ireland, July 08-12, 2018)
Amabili, Marco, Balasubramanian, Prabakaran, Breslavsky, Ivan D., Ferrari, Giovanni et Tubaldi, Eleonora.
2018.
« Viscoelastic characterization of woven Dacron for aortic grafts by using direction-dependent quasi-linear viscoelasticity ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 82.
pp. 282-290.
Amabili, Marco, Balasubramanian, Prabakaran, Ferrari, Giovanni, Le Guisquet, Stanislas, Karazis, Kostas, Painter, Brian et Piccagli, Lorenzo.
2018.
« Identification of non-linear vibration parameters of a nuclear fuel rod ».
In Proceedings of the ASME Design Engineering Technical Conference (Quebec, QC, Canada, Aug. 26-29, 2018)
American Society of Mechanical Engineers (ASME).
Amadou, Mamane M. D., Mehrjerdi, Hasan, Saad, Maarouf et Asber, Dalal.
2018.
« Improving participation of doubly fed induction generator in frequency regulation in an isolated power system ».
International Journal of Electrical Power and Energy Systems, vol. 100.
pp. 550-558.
Amara, Ibtihel, Granger, Eric et Hadid, Abdenour.
2018.
« Contextual weighting of patches for local matching in still-to-video face recognition ».
In 13th IEEE International Conference on Automatic Face & Gesture Recognition (FG 2018) (Xi'an, China, May 15-19, 2018)
pp. 756-763.
Los Alamitos, CA, USA : IEEE Computer Society.
Amarasinghe, Gayashan, De Assuncao, Marcos D., Harwood, Aaron et Karunasekera, Shanika.
2018.
« A data stream processing optimisation framework for edge computing applications ».
In 21st IEEE International Symposium on Real-Time Computing (ISORC) (Singapore, Singapore, May 29-31, 2018)
pp. 91-98.
Institute of Electrical and Electronics Engineers Inc..
Ameyed, Darine, Miraoui, Moeiz, Zaguia, Atef, Jaafar, Fehmi et Tadj, Chakib.
2018.
« Using probabilistic temporal logic PCTL and model checking for context prediction ».
Computing and Informatics, vol. 37, nº 6.
pp. 1411-1442.
Amirkhan, F., Nechache, R., Sakata, R., Takiguchi, K., Arikawa, T., Ozaki, T., Tanaka, K. et Blanchard, F..
2018.
« Characterization of thin-film optical properties by THz near-field imaging ».
In 2018 Photonics North Conference (PN) (Montreal, QC, Canada, June 5-7, 2018)
IEEE. Amirkhan, F., Ozaki, T., Tanaka, K. et Blanchard, François. 2018. « Material characterization through near field THz imaging ». Affiche présentée lors de la conférence : The 2nd International conference on advanced materials and processes for environnement, energy and health (iCAMP) (Montreal, QC, Canada, Oct. 31 - Nov. 2, 2018).
Ammar, Amira, Kanaan, Hadi Y., Hamouda, Mahmoud et Al-Haddad, Kamal.
2018.
« Review of indirect matrix converter topologies with uniform inputs versus multi-various outputs ».
In 2018 4th International Conference on Renewable Energies for Developing Countries (REDEC) (Beirut, Lebanon, Nov. 1-2, 2018)
IEEE.
Ammar, Amira, Kanaan, Hadi Y., Moubayed, Nazih, Hamouda, Mahmoud et Al-Haddad, Kamal.
2018.
« A novel digital signal processing modular technique for a grid-tie indirect matrix converter ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 20-23, 2018)
pp. 5267-5271.
Institute of Electrical and Electronics Engineers Inc..
Ammar, Amira, Kanaan, Hadi Y., Moubayed, Nazih, Hamouda, Mahmoud et Al-Haddad, Kamal.
2018.
« A simple hybrid PWM algorithm for a five-phase indirect matrix converter topology ».
In 19th IEEE International Conference on Industrial Technology (ICIT 2018) (Lyon, France, Feb. 20-22, 2018)
pp. 1909-1914.
IEEE.
Anand, Aniket, Singh, Bhim, Chandra, Ambrish et Al-Haddad, Kamal.
2018.
« Isolated cuk converter with two symmetrical output voltages for SRM drive ».
In 2018 IEEE Wireless Power Transfer Conference (WPTC) (Montreal, QC, Canada, June 3-7, 2018)
Piscataway, NJ, USA : IEEE.
Andrianarison, Maherizo et Landry, René Jr..
2018.
« New approach of high sensitivity techniques using collective detection method with multiple GNSS receivers ».
Sensors, vol. 18, nº 11.
Anh, Tung Tran, Fréchette, Michel, David, Éric, Veillette, René et Moraille, Patricia.
2018.
« Effect of POSS-grafted titanium dioxide on the electrical and thermal properties of LDPE/TiO2 polymer nanocomposite ».
Journal of Applied Polymer Science, vol. 135, nº 14.
Anh-Quang, Nguyen, Amrhar, Abdessamad et Landry, René.
2018.
« In-flight performance of a multi-mode software defined radio architecture for universal avionic radios ».
In Integrated Communications, Navigation, Surveillance Conference (ICNS) (Herndon, VA, USA, Apr. 10-12, 2018)
Piscataway, NJ, USA : IEEE.
April, Alain, Abran, Alain et Geullobeol, Baengkeuweeo.
2018.
« 소프트웨어 유지개선 관리 성숙도 모델을 이용한 평가와 모범 프랙티스를 중심으로t ».
Seoul, Korea; Goryeowon Bukseu : Rauinun. 512 p.
Arabsalmanabadi, Bita, Tashakor, Nima, Javadi, Alireza et Al-Haddad, Kamal.
2018.
« Charging techniques in lithium-ion battery charger: Review and new solution ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 5731-5738.
IEEE.
Araghi, Golrokh et Landry, René Jr.
2018.
« Temperature compensation model of MEMS inertial sensors based on neural network ».
In IEEE/ION Position, Location and Navigation Symposium (PLANS 2018) (Monterey, CA, USA, Apr. 23-26, 2018)
pp. 301-309.
IEEE.
Aranas, Clodualdo Jr., Rodrigues, Samuel, Fall, Ameth, Jahazi, Mohammad et Jonas, John.
2018.
« Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ».
Metals, vol. 8, nº 5.
Arango-Miranda, Raúl, Hausler, Robert, Romero-López, Rabindranarth, Glaus, Mathias et Ibarra-Zavaleta, Sara.
2018.
« An overview of energy and exergy analysis to the industrial sector, a contribution to sustainability ».
Sustainability, vol. 10, nº 1.
Arango-Miranda, Raul, Hausler, Robert, Romero-Lopez, Rabindranarth, Glaus, Mathias et Ibarra-Zavaleta, Sara P..
2018.
« Carbon dioxide emissions, energy consumption and economic growth: A comparative empirical study of selected developed and developing countries. “The role of exergy” ».
Energies, vol. 11, nº 10.
Araújo, Voncarlos M., Britto, Alceu S. Jr., Brun, André L., Oliveira, Luiz E. S. et Koerich, Alessandro L..
2018.
« Fine-grained hierarchical classification of plant leaf images using fusion of deep models ».
In IEEE 30th International Conference on Tools with Artificial Intelligence (ICTAI) (Volos, Greece, Nov. 5-7, 2018)
pp. 1-5.
IEEE Computer Society.
Arazm, Saeed, Vahedi, Hani et Al-Haddad, Kamal.
2018.
« Generalized phase-shift pulse width modulation for multi-level converters ».
In 2018 IEEE Electrical Power and Energy Conference (EPEC) (Toronto, ON, Canada, Oct. 10-11, 2018)
Piscataway, NJ, USA : IEEE.
Arazm, Saeed, Vahedi, Hani et Al-Haddad, Kamal.
2018.
« Phase-shift modulation technique for 5-level packed U-cell (PUC5) inverter ».
In IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG) (Doha, Qatar, Apr. 10-12, 2018)
Piscataway, NJ, USA : IEEE.
Arazm, Saeed, Vahedi, Hani et Al-Haddad, Kamal.
2018.
« Space vector modulation technique on single phase sensor-less PUC5 inverter and voltage balancing at flying capacitor ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 4504-4509.
IEEE. Arhumah, Z., Alkhabbat, M. et Pham, X-T.. 2018. « Heat effect on mechanical properties and microstructure of aluminum welding ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).
Arikawa, Takashi, Morimoto, Shohei, Hiraoka, Tomoki, Blanchard, François, Sakai, Kyosuke, Sasaki, Keiji et Tanaka, Koichiro.
2018.
« Control of spoof localized surface plasmons using terahertz near-field microscope ».
In Proceedings Conference on Lasers and Electro-Optics (San Jose, CA, USA, May 13-18, 2018)
Coll. « CLEO: Science and Innovations »
Optical Society of America.
Arkhazloo, Nima Bohlooli, Bazdidi-Tehrani, Farzad, Jean-Benoit, Morin et Jahazi, Mohammad.
2018.
« A numerical thermal analysis of the heating process of large size forged ingots ».
In THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 2278-2283.
Trans Tech Publications.
Arsenault, Richard, Brissette, François et Martel, Jean-Luc.
2018.
« The hazards of split-sample validation in hydrological model calibration ».
Journal of Hydrology, vol. 566.
pp. 346-362. Arsenault, Richard, Côté, Pascal et Latraverse, Marco. 2018. « Assessing the impacts of integrating snowpack error distribution in the management of a hydropower reservoir using Bayesian Stochastic Dynamic Programming (BSDP) ». Communication lors de la conférence : SINTEF 6th International Workshop on Hydro Scheduling in Competitive Electricity Markets (Stavanger, Norway, Sept. 12-13, 2018).
Arteau, Jean, Patron Gomez, Heidy Esther et Beauregard, Yvan.
2018.
« Anthropometry and selection of full body harness: beyond stature and body mass as selection criteria ».
In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64.
GFA Press.
Arunachalam, Shivaram, Gupta, Anubha A., Izquierdo, Ricardo et Nabki, Frederic.
2018.
« Suspended carbon nanotubes for humidity sensing ».
Sensors, vol. 18, nº 5.
Asghari, Vahid et Cheriet, Mohamed.
2018.
« Energy and connectivity aware resource optimization of nodes traffic distribution in smart home networks ».
Future Generation Computer Systems, vol. 88.
pp. 559-570.
Asgharzadeh-Karamshahloo, Iraj, Jabbarzadeh, Armin et Shavvalpour, Saeed.
2018.
« Assessing the use of radio frequency identification technologies as an alternative for insurance costs in hospitals ».
Technology and Health Care: Official journal of the European Society for Engineering and Medicine, vol. 26, nº 1.
pp. 81-92.
Assadi, Aymen Amine, Loganathan, Sivachandiran, Nguyen-Tri, Phuong, Gharib-Abou Ghaida, Sara, Bouzaza, Abdelkrim, Nguyen, Tuan Anh et Wolbert, Dominique.
2018.
« Pilot scale degradation of mono and multi volatile organic compounds by surface discharge plasma/TiO2reactor: investigation of competition and synergism ».
Journal of Hazardous Materials, vol. 357.
pp. 305-313.
Assi, Rola, Abo El Ezz, Ahmad et Zand Miralvand, Tania.
2018.
« Assessment of seismic rooftop acceleration demands in high-rise buildings ».
In 16th European Conference on Earthquake Engineering (Thessaloniki, Greece, June 18-21, 2018)
Assid, Morad, Gharbi, Ali et Hajji, Adnène.
2018.
« Planification simultanée de la production, de la remise à neuf et du setup pour un système hybride non fiable ».
In 12e Conférence Internationale de Modélisation, Optimisation et SIMulation- MOSIM’18 : L’essor des systèmes connectés dans l’industrie et les services (Toulouse, France, 27-29 juin 2018)
Asuo, Ivy M., Gedamu, Dawit, Ka, Ibrahima, Gerlein, Luis Felipe, Fortier, Francois-Xavier, Pignolet, Alain, Cloutier, Sylvain G. et Nechache, Riad.
2018.
« High-performance pseudo-halide perovskite nanowire networks for stable and fast-response photodetector ».
Nano Energy, vol. 51.
pp. 324-332.
Aubertin, J. D., Hoentzsch, S., Diederichs, M. S. et Milton, H..
2018.
« Influence of the creep law on pillar response based on numerical simulations of an underground salt mine ».
In 52nd U.S. Rock Mechanics/Geomechanics Symposium (Seattle, WA, United states, June 17-20, 2018)
American Rock Mechanics Association (ARMA).
Aubertin, J. D., Hutchinson, D. J., Diederichs, M. S. et Triebel, R..
2018.
« Proposed improvements for single blasthole test reporting methodology and observations from tests in rock salt mines ».
In FRAGBLAST 12 : 12th Internation Symposium on Rock Fragmentation by Blasting (Lulea, Switzerland, June 09-15, 2018)
pp. 495-507.
Lulea University of Technology. Aubertin, Jonathan D.. 2018. « LiDAR applications to underground rock blasting optimization ». Communication lors de la conférence : 3rd Virtual Geoscience Conference (Kingston, ON, Canada, Aug. 22-24, 2018). Aubertin, Jonathan D., Hutchinson, D. J. et Diederichs, M. S.. 2018. « Applications du LiDAR aux pratiques de sautages en mines souterraines ». Communication lors de la conférence : 41e Session d’étude sur les techniques de sautage (Québec, QC, Canada, 15-16 nov. 2018).
Aubry-Wake, Caroline, Zéphir, Dorian, Baraer, Michel, McKenzie, Jeffrey M. et Mark, Bryan G..
2018.
« Importance of longwave emissions from adjacent terrain on patterns of tropical glacier melt and recession ».
Journal of Glaciology, vol. 64, nº 243.
pp. 49-60. Augas, Julien, Rousseau, Alain N., Savary, Stephane, Caillouet, Laurie et Baraer, Michel. 2018. « Comparison between a single-layer snow model and a multi-layer snow model for snow-water-equivalent modeling ». Communication lors de la conférence : 2018 AGU Fall Meeting (Washington, DC, USA, Dec. 10-14, 2018).
Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim.
2018.
« Experimental investigation of interfacial and permeation leak rates in sheet gaskets and valve stem packing ».
In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Zhao, Zijian.
2018.
« Prediction of leak rates through porous materials using analytical and numerical approaches ».
In ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018)
ASME.
Ayache, Khedidja, Chandra, Ambrish et Cheriti, Ahmed.
2018.
« Second quadrant electrothermal characterization of photovoltaic cells for safe reverse bias operation and improved shadow performances ».
In 2018 IEEE Industry Applications Society Annual Meeting (IAS) (Portland, OR, USA, Sept. 23-27, 2018)
IEEE.
Ayache, Khedidja, Chandra, Ambrish, Cheriti, Ahmed et Ouameur, Messaoud Ahmed.
2018.
« AC dynamic parameters extraction of shaded solar cells based on analytical methods and LMLS algorithm ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 1681-1686.
IEEE.
Ayachi, R., Guillon, D., Marmier, F., Vareilles, É., Aldanondo, M., Coudert, T., Geneste, L. et Beauregard, Y..
2018.
« Elaboration d'offres en relation client-fournisseur : vers une exploitation des connaissances pour l'ingénierie des risques ».
In MOSIM'18 - 12ème Conférence internationale de Modélisation, Optimisation et SIMulation : L’essor des systèmes connectes dans l’industrie et les services (Toulouse, France, June 27-29, 2018)
pp. 229-236.
IMT Mines Albi.
Ayachi, R., Guillon, D., Marmier, F., Vareilles, E., Aldanondo, M., Coudert, T., Geneste, L. et Beauregard, Y..
2018.
« Towards a knowledge based support for risk engineering when elaborating offer in response to a customer demand ».
In 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Bangkok, Thailand, Dec. 16-19, 2018)
pp. 1056-1060.
Piscataway, NJ, USA : IEEE.
Azizi, S., Ouellet-Plamondon, C., David, E. et Frechette, M. F..
2018.
« Electric response and thermal properties of ethylene vinyl acetate/graphene-based composite ».
In 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Cancun, Mexico, Oct. 21-24, 2018)
pp. 62-65.
IEEE.
Azizi, Sohrab, David, Éric, Fréchette, Michel F., Nguyen-Tri, Phuong et Ouellet-Plamondon, Claudiane M..
2018.
« Electrical and thermal conductivity of ethylene vinyl acetate composite with graphene and carbon black filler ».
Polymer Testing, vol. 72.
pp. 24-31.
Baa Wafaa, Majid et Dessaint, Louis-A..
2018.
« Approach to dynamic voltage stability analysis for DFIG wind parks integration ».
IET Renewable Power Generation, vol. 12, nº 2.
pp. 190-197.
Babahenini, Djihane, Gruson, Adrien, Chaouki Babahenini, Mohamed et Bouatouch, Kadi.
2018.
« Efficient inverse transform methods for VPL selection in global illumination ».
Multimedia Tools and Applications, vol. 77, nº 11.
pp. 13571-13595.
Babaie, Mohammad, Sharifzadeh, Mohammad, Mehrasa, Majid, Baillargeon, Louis-Félix et Al-Haddad, Kamal.
2018.
« A robust fuzzy-based control technique for grid-connected operation of sensor-less PUC5 inverter ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 5272-5276.
IEEE.
Bachand, Alexandre T., Perraton, Daniel et Vaillancourt, Michel.
2018.
« Vers des enrobés avec verre? Résultats d'essais réalisés au LCMB de l'ÉTS ».
Via Bitume, vol. 13, nº 2.
pp. 30-33.
Badarneh, Osamah S., Almehmadi, Fares S. et Kadoch, Michel.
2018.
« Performance analysis of spectrum sharingbased multi-hop decode-and-forward over Nakagami-m fading channels subject to additive white generalised Gaussian noise ».
IET Communications, vol. 12, nº 4.
pp. 415-424.
Badarneh, Osamah S., Ansari, Imran Shafique, Kadoch, Michel et Yang, Xiaodong.
2018.
« Wireless power transfer in cooperative dual-hop relaying systems with beamforming over generalized fading channels ».
In IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 08-13, 2017)
IEEE.
Badeli, Saeed, Carter, Alan et Doré, Guy.
2018.
« Complex modulus and fatigue analysis of asphalt mix after daily rapid freeze-thaw cycles ».
Journal of Materials in Civil Engineering, vol. 30, nº 4.
Badeli, Saeed, Carter, Alan et Doré, Guy.
2018.
« Effect of laboratory compaction on the viscoelastic characteristics of an asphalt mix before and after rapid freeze-thaw cycles ».
Cold Regions Science and Technology, vol. 146.
pp. 98-109.
Badeli, Saeed, Carter, Alan, Doré, Guy et Saliani, Saeed.
2018.
« Evaluation of the durability and the performance of an asphalt mix involving Aramid Pulp Fiber (APF): Complex modulus before and after freeze-thaw cycles, fatigue, and TSRST tests ».
Construction and Building Materials, vol. 174.
pp. 60-71.
Badi, Abdelhak, Saad, Maarouf, Gauthier, Guy et Archambault, Philippe.
2018.
« Inverse kinematics for a novel rehabilitation robot for lower limbs ».
In 3rd International Conference on Cable-Driven Parallel Robots (CableCon) (Québec, QC, Canada, Aug. 02-04, 2017)
Coll. « Mechanisms and Machine Science », vol. 53.
pp. 376-389.
Springer Netherlands.
Bahig, Houda, de Guise, Jacques, Vu, Toni, Blais, Danis, Chartrand-Lefebvre, Carl, Nguyen, Nhu Tram, Lavertu, Sophie, Guay, Jean-Pierre, Bedwani, Stephane et Roberge, David.
2018.
« In a heartbeat: an assessment of dynamic dose variation to cardiac structures using dual source computed tomography ».
International Journal of Radiation Oncology*Biology*Physics, vol. 102, nº 4.
pp. 950-959.
Bahig, Houda, Nguyen-Tan, Phuc Félix, Filion, Édith, Roberge, David, Thanomsack, Pensavan, de Guise, Jacques, Blais, Danis, Doucet, Robert, Létourneau-Guillon, Laurent et Lambert, Louise.
2018.
« Cine-magnetic resonance imaging for assessment of larynx motion in early glottic cancer radiotherapy ».
In
MReadings : MR in RT.
4th Edition ESTRO 2018.
pp. 25-27. Siemens Healthineers.
Baig, Asim, Al-Ma'adeed, Somaya A. S., Bouridane, Ahmed et Cheriet, Mohamed.
2018.
« Automatic segmentation and reconstruction of historical manuscripts in gradient domain ».
IET Image Processing, vol. 12, nº 4.
pp. 502-512.
Bakhous, Christine, Aubert, Benjamin, Vazquez, Carlos, Cresson, Thierry, Parent, Stefan et de Guise, Jacques.
2018.
« Automatic pedicles detection using convolutional neural network in a 3D spine reconstruction from biplanar radiographs ».
In Progress in Biomedical Optics and Imaging (Houston, TX, USA, Feb. 12-15, 2018)
Coll. « Proceedings of SPIE », vol. 10575.
SPIE.
Bala, Abdalla et Abran, Alain.
2018.
« Impact analysis of multiple imputation on effort estimation models with the ISBSG repository of software projects ».
Software Measurement News, vol. 23, nº 1.
pp. 17-34.
Balasubramanian, Prabakaran, Ferrari, Giovanni et Amabili, Marco.
2018.
« Identification of the viscoelastic response and nonlinear damping of a rubber plate in nonlinear vibration regime ».
Mechanical Systems and Signal Processing, vol. 111.
pp. 376-398.
Banerjee, Debika, Benavides, Jaime A., Guo, Xiaohang et Cloutier, Sylvain G..
2018.
« Tailored interfaces of the bulk silicon nanowire/TiO2 heterojunction promoting enhanced photovoltaic performances ».
ACS Omega, vol. 3, nº 5.
pp. 5064-5070.
Banerjee, Debika, Guo, Xiaohang et Cloutier, Sylvain G..
2018.
« Plasmon-enhanced silicon nanowire array-based hybrid heterojunction solar cells ».
Solar RRL, vol. 2, nº 7.
Baraër, Michel. 2018. « Cryospheric changes and hydrology in alpines watershed of the Southwest Yukon ». Communication lors de la conférence : What’s up at Geotop (Montreal, QC, Canada, Feb., 2018). Baraër, Michel. 2018. « Glaciers and water resources ». Communication lors de la conférence : McGill CIVE 615 Environmental Engineering seminar (Montreal, QC, Canada, Oct. 2018). Baraër, Michel. 2018. « Quelle est l’influence des eaux souterraines sur les écoulements de surface dans les vallées glaciaires du Yukon du sud-ouest? ». Communication lors de la conférence : Conférences en hydrogéologie du RQES-AIH (Montreal, QC, Canada, 20 févr. 2018).
Barbin Laurindo, Fernando José, Melhado, Silvio Burratino et Monghol, Tiely Zurlo.
2018.
« Gestão do conhecimento estratégico: abordagem de construtoras internacionais atuando no Brasil ».
In XXXVIII Encontro Nacional de Engenharia de Producao (ENEGEP) (Maceió, Brasil, Oct. 16-19, 2018)
São Paulo : ABEPRO.
Bardela, Paul-Alexandre, Botez, Ruxandra Mihaela, Bournisien, Thomas et Rusovici, Razvan.
2018.
« Identification and validation of the cessna citation X turbofan modelling with flight tests ».
In AIAA Modeling and Simulation Technologies Conference (Kissimmee, FL, USA, Jan. 08-15, 2018)
American Institute of Aeronautics and Astronautics Inc..
Bardela, Paul-Alexandre, Pageaud, Pierre et Botez, Ruxandra.
1 mars 2018.
« Validation d’un modèle de moteur de Cessna ».
[Article de recherche]. Substance ÉTS.
Bardela, Paul-Alexandre, Pageaud, Pierre et Botez, Ruxandra.
20 février 2018.
« Validation d’un modèle pour le compresseur d’un moteur Cessna ».
[Article de recherche]. Substance ÉTS.
Bardela, Paul-Alexandre, Pageaud, Pierre et Botez, Ruxandra.
20 février 2018.
« Validation of a Cessna Engine Compressor Model ».
[Article de recherche]. Substance ÉTS.
Bardela, Paul-Alexandre, Pageaud, Pierre et Botez, Ruxandra.
1 mars 2018.
« Validation of a Cessna Engine Model ».
[Article de recherche]. Substance ÉTS.
Barzegar, B., Zhang, K. et Kummert, M..
2018.
« Energy flexibility analysis for photovoltaic solar system with battery ».
In 10th Conference of IBPSA-Canada (Montreal, QC, Canada, May 09-10, 2018)
pp. 183-192.
Bascans, Clarisse, Mezghani, Neila, Tétreault, Patrice, Skalli, Wafa et Hagemeister, Nicola. 2018. « Scapula morphological parameters and MRI findings to explain variability of the constant score of patients with a supraspinatus tear ». Communication lors de la conférence : 28th Congress of the European Society for Surgery of the Shoulder and the Elbow (SECEC-ESSSE) (Geneva, Switzerland, Sept. 19-22, 2018).
Basta, Mohamed, Lapalme, James, Paquet, Marc, Saint-Louis, Patrick et Abu Zwaida, Tarek.
2018.
« How are supply chains addressing their social responsibility dilemmas? Review of the last decade and a half ».
Corporate Social Responsibility and Environmental Management, vol. 25, nº 5.
pp. 833-843.
Batista, Natassia L., Helal, Emna, Kurusu, Rafael S., Moghimian, Nima, David, Eric, Demarquette, Nicole R. et Hubert, Pascal.
2018.
« Commercial graphene high density polyethylene nanocomposites for high volume applications ».
In SAMPE Long Beach 2018 Conference and Exhibition (Long Beach, CA, USA, May 21-24, 2018)
p. 14.
SAMPE.
Batista, P. I. B., Pessoa, R. G. A. Q., Povoas, Y. V. et Melhado, S. B..
2018.
« Percepção dos usuários para gestão da manutenção predial: estudo de caso de edificação residencial ».
In XVII Encontro Nacional de Tecnologia do Ambiente Construído (ENTAC) (Foz do Iguaçu, Brésil, Nov. 12-14, 2018)
pp. 2201-2208.
Porte Alegre : ANTAC.
Bautista Villalpando, Luis Eduardo, Abran, Alain, Ravanello, Anderson et Ramirez, Arturo Elias.
2018.
« A three-dimensional performance measurement model for cloud computing ».
Journal of Software Engineering and Applications, vol. 11, nº 5.
pp. 235-248.
Bavand, R., Chen, L., França, R., Loran, S., Yang, D. Q., Yelon, A., Zhang, G. X. et Sacher, E..
2018.
« Comment on “Intensity modulation of the Shirley background of the Cr3p spectra with photon energies around the Cr2p edge”, by A Herrera-Gomez, D Cabrera-German, A D Dutol et al, Surface Interface Anal, 2018;50:246-252 ».
Surface and Interface Analysis, vol. 50, nº 7.
pp. 683-685.
Bayati, Abdolkhalegh, Nguyen, Kim et Cheriet, Mohamed.
2018.
« Multiple-step-ahead traffic prediction in high-speed networks ».
IEEE Communications Letters, vol. 22, nº 12.
pp. 2447-2450.
Bazrafshan, Amir, Taherzadeh-Sani, Mohammad et Nabki, Frédéric.
2018.
« A 0.8-4-GHz software-defined radio receiver with improved harmonic rejection through non-overlapped clocking ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 65, nº 10.
pp. 3186-3195.
Beaudoin, Y., Desbiens, A., Gagnon, E. et Landry, R. Jr.
2018.
« Satellite launcher navigation aided by a stochastic model of the vehicle ».
In Proceeding of Astro18 Astronautics Conference 2018 (Quebec, QC, Canada, May 15-17, 2018)
Canadian Aeronautics and Space Institute.
Beaudoin, Yanick, Desbiens, André, Gagnon, Eric et Landry, René Jr..
2018.
« Observability of satellite launcher navigation with INS, GPS, attitude sensors and reference trajectory ».
Acta Astronautica, vol. 142.
pp. 277-288.
Beaudoin, Yanick, Desbiens, André, Gagnon, Eric et Landry, René Jr..
2018.
« Satellite launcher navigation with one versus three IMUs: Sensor positioning and data fusion model analysis ».
Sensors, vol. 18, nº 6.
Beaugendre, H. et Morency, F..
2018.
« Penalization of the Spalart–Allmaras turbulence model without and with a wall function: Methodology for a vortex in cell scheme ».
Computers and Fluids, vol. 170.
pp. 313-323. Beauséjour, Marie-Hélène, Petit, Yvan, Mac Thiong, Jean-Marc, Arnoux, Jean-Pierre, Hagen, Jérémy et Wagnac, Éric. 2018. « Complete disruption of posterior ligamentous complex and disruption of intervertebral disc compromises cervical spine stability in flexion ». Affiche présentée lors de la conférence : 39th SICOT Orthopaedic World Congress (Montreal, QC, Canada, Oct. 11-13, 2018). Beauséjour, Marie-Hélène, Wagnac, Éric, Arnoux, Jean-Pierre, Mac-Thiong, Jean-Marc, Hagen, Jérémy et Petit, Yvan. 2018. « Influence of a posterior ligamentous complex injury on the mechanical condition of the spinal cord during flexion ». Affiche présentée lors de la conférence : ASIA 2018 44th Annual Scientific Meeting (Rochester, MN, USA, May 02-04, 2018).
Bédard, Juliette et Boton, Conrad.
2018.
« Integrating construction specifications and building information modeling ».
In Cooperative Design, Visualization, and Engineering ; 15th International Conference, CDVE 2018 (Hangzhou, China, Oct. 21–24, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11151.
pp. 86-93.
Springer International Publishing. Bédécarrats, Jean-Pierre et Haillot, Didier. 2018. « Projet STEEP: stockage thermique pour l’éco-efficacité des procédés ». Communication lors de la conférence : Journées ADEME/ANR (Issy-les-Moulineaux, France, 4-5 juin 2018).
Beer, Ferdinand P., Johnston, E. Russell, Mazurek, David F., Cornwell, Phillip J., Self, Brian P., Hénault, Alain et David, Éric.
2018.
« Mécanique pour ingénieurs : Dynamique ».
3e édition.
Montréal (Québec) Canada : Chenelière éducation. Beguet, Florian, de Guise, Jacques A., Schmittbuhl, Matthieu et Mari, Jean-Luc. 2018. « Description de formes complexes par subdivision de graphes de courbures ». Communication lors de la conférence : Journées Françaises d’Informatique Graphique et du chapitre français d’Eurographics (JFIG) (Poitiers, France, 13-16 nov. 2018).
Beguet, Florian, Mari, Jean-Luc, Cresson, Thierry, Schmittbuhl, Matthieu et De Guise, Jacques A..
2018.
« Automatic extraction of complex 3D structures application to the inner ear segmentation from Cone Beam CT digital volumes ».
In Eurographics Workshop on 3D Object Retrieval (EG 3DOR) (Delft, Netherlands, Apr. 6, 2018)
pp. 17-20.
Eurographics Association. Beguet, Florian, Mari, Jean-Luc, Schmittbuhl, Matthieu, Cresson, Thierry et de Guise, Jacques A.. 2018. « Extraction automatique de structures 3D complexes - Application à la segmentation de l’oreille interne à partir de volumes numériques ». Communication lors de la conférence : Journées du Groupe de Travail en Modélisation Géométrique (GTMG) (Aix-en-Provence, France, 21-22 mars 2018).
Belghait, Fodil et April, Alain.
2018.
« The future of large-scale precision medicine research platforms: preparing the data for analysis ».
International Journal of Trend in Research and Development, nº Special Issue, ICTIMESH-18.
pp. 91-94.
Belghait, Fodil, Kanzki, Beatriz et April, Alain.
2018.
« ADAM genomics schema - Extension for precision medicine research ».
In 8th International Conference on Digital Health (DH 2018) (Lyon, France, Apr. 23-26, 2018)
Coll. « ACM International Conference Proceeding Series »
ACM.
Ben Attia, Maroua, Nguyen, Kim-Khoa et Cheriet, Mohamed.
2018.
« QoS-aware software-defined routing in smart community network ».
Computer Networks, vol. 147.
pp. 221-235. Ben Ayed, Ismail, Pavlov, Dmitry, Punithakumar, Kumaradevan, Hojjat, Seyed-Parsa et Garvin, Gregory (inventeurs) 6 février 2018. « Methods and apparatus to label radiology images ». General Electric Company (titulaire(s)). Brevet américain US 9,886,546.
Ben Fadhel, Y., Ktata, S., Rahmani, S. et Al-Haddad, K..
2018.
« Design and simulation of wireless power transfer system for brain implant ».
In 2018 15th International Multi-Conference on Systems, Signals Devices (SSD) (Hammamet, Tunisia, March 19-22, 2018)
pp. 292-297.
IEEE.
Ben Fredj, Emna, Ghasemi Nanesa, Hadi, Jahazi, Mohammad et Morin, Jean-Benoit.
2018.
« Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ».
Journal of Iron and Steel Research International, vol. 25, nº 5.
pp. 554-562.
Benacchio, S., Doutres, O., Le Troter, A., Varoquaux, A., Wagnac, E., Callot, V. et Sgard, F..
2018.
« Estimation of the ear canal displacement field due to in-ear device insertion using a registration method on a human-like artificial ear ».
Hearing Research, vol. 365.
pp. 16-27. Benacchio, Simon et Doutres, Olivier. 2018. « Application of a registration method on magnetic resonance images to evaluate the displacement field of a human subject ear canal due to various earplug insertions ». Communication lors de la conférence : 175th Meeting of the Acoustical Society of America (Minneapolis, MN, USA, May 7-11, 2018).
Benadja, M., Rezkallah, M., Benhalima, S., Tidjani, F. S., Hamadi, A. et Chandra, A..
2018.
« A novel MRAC strategy for fault impact mitigation in HVDC-connected offshore wind farm system ».
In 2018 IEEE Industry Applications Society Annual Meeting (IAS) (Portland, OR, USA, Sept. 23-27, 2018)
IEEE.
Benariba, Aboubakeur, Bouzidane, Ahmed, Thomas, Marc et Guilbault, Raynald.
2018.
« Numerical analysis of a rigid rotor mounted on four-pad hydrostatic squeeze film damper lubricated with micropolar lubricant ».
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 232, nº 5.
pp. 513-524.
Benasla, Amel et Hausler, Robert.
2018.
« Optimisation of growth of raphidocelis subcapitata immobilised for biofuel production: Influence of alginate and CaCl2 concentrations on growth ».
Environments, vol. 5, nº 5.
Benavides, Jaime A., Trudeau, Charles P., Gerlein, Luis F. et Cloutier, Sylvain G..
2018.
« Laser selective photoactivation of amorphous TiO2 films to anatase and/or rutile crystalline phases ».
ACS Applied Energy Materials, vol. 1, nº 8.
pp. 3607-3613.
Benavides, Jaime, Trudeau, Charles, Gerlien Reyes, Luis Felipe et Cloutier, Sylvain G..
7 novembre 2018.
« Structure cristalline de TiO2 « à la carte » ».
[Article de recherche]. Substance ÉTS.
Benavides, Jaime, Trudeau, Charles, Gerlien Reyes, Luis Felipe et Cloutier, Sylvain G..
7 novembre 2018.
« TiO2 Crystalline Structure “À la Carte” ».
[Article de recherche]. Substance ÉTS.
Benevides, Rodrigo, Carvalho, Natalia C., Ménard, Michaël, Frateschi, Newton C., Wiederhecker, Gustavo S. et Alegre, Thiago P. Mayer.
2018.
« Overcoming optical spring effect with thermo-opto-mechanical coupling in GaAs microdisks ».
In Latin America Optics and Photonics Conference 2018 (Lima, Peru, Nov. 14-15, 2018)
OSA - The Optical Society.
Benevides, Rodrigo, Ménard, Michaël, Wiederhecker, Gustavo S. et Alegre, Thiago P. Mayer.
2018.
« Plasma-etched GaAs optomechanical microdisks fabricated with an electro-lithographic soft mask ».
In Latin America Optics and Photonics Conference 2018 (Lima, Peru, Nov. 12-15, 2018)
OSA - The Optical Society.
Benhalima, Seghir, Miloud, Rezkallah et Chandra, Ambrish.
2018.
« Real-time implementation of robust control strategies based on sliding mode control for standalone microgrids supplying non-linear loads ».
Energies, vol. 11, nº 10.
Benhalima, Seghir, Tidjani, Fadoul Souleyman, Benadja, Mounir, Rezkallah, Miloud, Chandra, Ambrish, Raddaoui, Abderaouf et Ikaouasseen, Halima.
2018.
« Modified unified control of VSC-HVDC based offshore wind farm connected to onshore large-scale photovoltaic power station ».
In 6th International Renewable and Sustainable Energy Conference (IRSEC 2018) (Rabat, Morocco, Dec. 05-08, 2018)
Institute of Electrical and Electronics Engineers Inc..
Benni, Benjamin, Mosser, Sébastien, Moha, Naouel et Riveill, Michel.
2018.
« A delta-oriented approach to support the safe reuse of black-box code rewriters ».
In New Opportunities for Software Reuse : 17th International Conference, ICSR 2018 : Proceedings (Madrid, Spain, May 21-23, 2018)
Coll. « Lecture Notes in Computer Science », vol. 10826.
pp. 164-180.
Springer Verlag. Bensoussan, David. 2018. « Fast time response decentralized control ». Communication lors de la conférence : Control & Systems Theory Seminar at the Technion (Haifa, Israel, Aug. 06, 2018).
Benzeguir, Zine El Abidine, El-Saikaly, Georges et Chaallal, Omar.
2018.
« Influence of size on the behavior of RC T-beams strengthened in shear with externally bonded CFRP ».
In 9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2018) (Paris, France, July 17-19, 2018)
pp. 750-755.
International Institute for FRP in Construction.
Benzid, Djedjiga et Kadoch, Michel.
2018.
« Raptor code to mitigate Pilot contamination in Massive MiMo ».
In 9th International Conference on Ambient Systems, Networks and Technologies (ANT 2018) / The 8th International Conference on Sustainable Energy Information Technology (SEIT-2018) (Porto, Portugal, May 08-11, 2018)
Coll. « Procedia Computer Science », vol. 130.
pp. 310-317.
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2018.
« A comparison between aggregation before and after propagation based on a reliability model ».
Information Sciences, vol. 453.
pp. 99-110.
Berger, Maxime, Kocar, Ilhan, Fortin-Blanchette, Handy et Lavertu, Carl.
2018.
« Hybrid average modeling of three-phase dual active bridge converters for stability analysis ».
IEEE Transactions on Power Delivery, vol. 33, nº 4.
pp. 2020-2029. Bernier, Antoine et Voix, Jérémie. 2018. « Advancements on an active hearing protection device for musicians ». Affiche présentée lors de la conférence : National Hearing Conservation Association (Orlando, FL, USA, Feb. 15-17, 2018). Bernier, Antoine et Voix, Jérémie. 2018. « The ear beyond hearing: From digital earplugs to in-ear brain computer interfaces ». Communication lors de la conférence : 2018 National Hearing Conservation Association Conference (Orlando, FL, USA, Feb. 15-17, 2018).
Berrima, Safa, Blaquière, Yves et Savaria, Yvon.
2018.
« Diagnosis algorithms for a reconfigurable and defect tolerant JTAG scan chain in large area integrated circuits ».
Integration, vol. 62.
pp. 159-169.
Bertrand, Samuel, Shahriari, Davood, Jahazi, Mohammad et Champliaud, Henri.
2018.
« Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ».
In 17th International Conference on Metal Forming (Metal Forming) (Toyohashi, Japan, Sept. 16-19, 2018)
Coll. « Procedia Manufacturing », vol. 15.
pp. 1382-1390.
Netherlands : Elsevier B.V..
Bertrand-Grenier, Antony, Zehtabi, Fatemeh, Lerouge, Sophie, Alturkistani, Husain, Kauffmann, Claude, Bodson-Clermont, Paule, Salazkin, Igor, Héon, Hélène, Cloutier, Guy et Soulez, Gilles.
2018.
« Shear wave elasticity imaging for residual endoleak and thrombus characterisation after endoleak embolisation following endovascular aneurysm repair: a canine animal study ».
European Radiology Experimental, vol. 2.
Bethell, E., Ernst, R.E. et Samson, C.. 2018. « Geological history of the Alpha Regio (V-32) quadrangle, Venus ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Mar. 23-25, 2018).
Bezzina, Amira, Ayari, Mouna, Langar, Rami et Saidane, Leila.
2018.
« Joint optimization of resource and power allocation in heterogeneous urban dense cellular networks ».
In 14th International Wireless Communications & Mobile Computing Conference (IWCMC) (Limassol, Cyprus, June 25-29, 2018)
pp. 345-351.
IEEE.
Billerot, Pierre-Lou, Dufresne, Louis et Seers, Patrice.
2018.
« 3D CFD modelling of a porous burner geometry ».
In Combustion Institute - Canadian Section. Spring Technical Meeting (Toronto, ON, Canada, May 14-17, 2018)
Bitterlin, Matthieu, Shahriari, Davood, Lapierre-Boire, Louis-Philippe, Morin, Jean-Benoît et Jahazi, Mohammad.
2018.
« Hot deformation behavior of a nickel-modified AISI 4330 steel ».
ISIJ International, vol. 58, nº 9.
pp. 1711-1720. Blanchard, François. 2018. « Intense terahertz source and near-field imaging ». Communication lors de la conférence : Séminaire au département de Physique à l’université d’Ottawa (Ottawa, ON, Canada).
Blanchard, François.
9 janvier 2018.
« Les térahertz, une technologie pour voir à travers les murs! ».
Substance ÉTS.
Blanchard, François.
9 janvier 2018.
« Terahertz, a Technology That Can See Through Walls! ».
Substance ÉTS.
Blanchard, François, Chai, Xin, Tanaka, Tomoko, Arikawa, Takashi, Ozaki, Tsuneyuki, Morandotti, Roberto et Tanaka, Koichiro.
2018.
« Terahertz microscopy assisted by semiconductor nonlinearities ».
Optics Letters, vol. 43, nº 20.
pp. 4997-5000. Blanchard, François, Nechache, Riad, Sakata, Ryoichi, Amirkhan, Fatemeh, Takiguchi, Kenji, Arikawa, T. et Tanaka, Koichiro. 2018. « Near-field terahertz imaging using Bi2FeCrO6 (BFCO) thin-film sensor ». Communication lors de la conférence : Progress in Electromagnetics Research Symposium (PIERS) (Toyama, Japan, Aug. 1-4, 2018).
Blancke, Olivier, Combette, Amélie, Amyot, Normand, Komljenovic, Dragan, Lévesque, Mélanie, Hudon, Claude, Tahan, Antoine et Zerhouni, Noureddine.
2018.
« A predictive maintenance approach for complex equipment based on petri net failure mechanism propagation model ».
Proceedings of the European Conference of the PHM Society, vol. 4, nº 1.
Blancke, Olivier, Tahan, Antoine, Komljenovic, Dragan, Amyot, Normand, Lévesque, Mélanie et Hudon, Claude.
2018.
« A holistic multi-failure mode prognosis approach for complex equipment ».
Reliability Engineering and System Safety, vol. 180.
pp. 136-151.
Blangy, Sylvie, Bernier, Monique, Bhiry, Najat, Jean-Pierre, Dedieu, Aenishaenslin, Cécile, Bastian, Suzanne, Chanteloup, Laine, Coxam, Véronique, Decaulne, Armelle, Gérin-Lajoie, José, Gibout, Stéphane, Haillot, Didier, Hébert-Houle, Emilie, Herrmann, Thora Martina, Joliet, Fabienne, Lamalice, Annie, Lévesque, Esther, Ravel, André et Rousse, Daniel.
2018.
« OHMi-Nunavik: a multi-thematic and cross-cultural research program studying the cumulative effects of climate and socio-economic changes on Inuit communities ».
Écoscience, vol. 25, nº 4.
pp. 311-324.
Boivin, Guillaume, Viens, Martin et Belanger, Pierre.
2018.
« Plane wave SH0 piezoceramic transduction optimized using geometrical parameters ».
Sensors, vol. 18, nº 2.
Bolduc, M., Trudeau, C., Beaupré, P., Cloutier, S. G. et Galarneau, P..
2018.
« Thermal dynamics effects using pulse-shaping laser sintering of printed silver inks ».
Scientific Reports, vol. 8, nº 1.
p. 1418.
Bonfiglio, Paolo, Pompoli, Francesco, Horoshenkov, Kirill V., Rahim, Mahmud Iskandar B. Seth A., Jaouen, Luc, Rodenas, Julia, Bécot, François-Xavier, Gourdon, Emmanuel, Jaeger, Dirk, Kursch, Volker, Tarello, Maurizio, Roozen, Nicolaas Bernardus, Glorieux, Christ, Ferrian, Fabrizio, Leroy, Pierre, Vangosa, Francesco Briatico, Dauchez, Nicolas, Foucart, Félix, Lei, Lei, Carillo, Kevin, Doutres, Olivier, Sgard, Franck, Panneton, Raymond, Verdiere, Kévin, Bertolini, Claudio, Bär, Rolf, Groby, Jean-Philippe, Geslain, Alan, Poulain, Nicolas, Rouleau, Lucie, Guinault, Alain, Ahmadi, Hamid et Forge, Charlie.
2018.
« How reproducible are methods to measure the dynamic viscoelastic properties of poroelastic media? ».
Journal of Sound and Vibration, vol. 428.
pp. 26-43.
Bonnet, Fabien, Nélisse, Hugues et Voix, Jeremie.
2018.
« Acoustical corrections to be used for improved in-ear noise dosimetry measurements ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 143, nº 3.
p. 1910.
Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie.
2018.
« Effects of ear canal occlusion on hearing sensitivity: A loudness experiment ».
Journal of the Acoustical Society of America, vol. 143, nº 6.
pp. 3574-3582. Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie. 2018. « Loudness in the occluded ear canal: Are we again missing 6 dB? ». Communication lors de la conférence : National Hearing Conservation Association Annual Conference 2018 (Orlando, FL, USA, Feb. 15-17, 2018).
Bordeleau, Francis, Van Den Brand, Mark, Combemale, Benoit, Eramo, Romina et Wimmer, Manuel.
2018.
« Tool-support of socio-technical coordination in the context of heterogeneous modeling : A research statement and associated roadmap ».
In GEMOC - 6th International Workshop on the Globalization of Modeling Languages (Copenhagen, Denmark, Oct. 14-19, 2018)
Coll. « CEUR Workshop Proceedings », vol. 2245.
pp. 423-425.
CEUR-WS.
Botez, R. M..
2018.
« Morphing wing, UAV and aircraft multidisciplinary studies at the Laboratory of Applied Research in Active Controls, Avionics and AeroServoElasticity LARCASE ».
AerospaceLab Journal, nº 14.
Botez, R. M., Koreanschi, A., Gabor, O. S., Tondji, Y., Guezguez, M., Kammegne, J. T., Grigorie, L. T., Sandu, D., Mebarki, Y., Mamou, M., Amoroso, F., Pecora, R., Lecce, L., Amendola, G., Dimino, I. et Concilio, A..
2018.
« Numerical and experimental transition results evaluation for a morphing wing and aileron system ».
Aeronautical Journal, vol. 122, nº 1251.
pp. 747-784. Botez, Ruxanda. 2018. « Adaptive neuro-fuzzy inference system application for the design and experimental validation of morphing wing tip ». Communication lors de la conférence : The 8th International Conference & Workshop REMOO Energy (Venice, Italy, May 29-31, 2018). Botez, Ruxanda. 2018. « Aero-propulsive engine modeling based on flight test data ». Communication lors de la conférence : The 42nd Romanian American Academy of Arts and Science ARA Congress: ARA at the Great Union Centenary (Cluj, Romania, May 19-25, 2018). Botez, Ruxanda. 2018. « Green aircraft minimum fuel consumption methodologies ». Communication lors de la conférence : GLObal and Regional Environmental Protection (GLOREP) (Timisoara, Romania, Nov. 15-17, 2018). Botez, Ruxanda. 2018. « Green aircraft modeling and simulation based on flight tests ». Communication lors de la conférence : Technion – Israel Institute of Technology (Haifa, Israel, Nov. 05, 2018). Botez, Ruxanda. 2018. « Identification and validation methodologies of an aero-propulsive engine model from flight tests ». Communication lors de la conférence : 11th International Conference on Advanced Computational Engineering and Experimenting (ACE-X) (Amsterdam, Netherlands, July 01-04, 2018). Botez, Ruxanda. 2018. « Mihai and Alexandru Ciucă Brothers – Romanian scientists ». Communication lors de la conférence : The 42nd Romanian American Academy of Arts and Science ARA Congress: ARA at the Great Union Centenary (Cluj, Romania, May 19-25, 2018). Botez, Ruxanda. 2018. « Morphing multidisciplinary (Aero-Composites Structures-Controls) technologies in aerospace ». Communication lors de la conférence : International Conference on Advanced Structural and Functional Materials (ICAS) (Krakow, Poland, Aug. 21-24, 2018). Botez, Ruxanda. 2018. « Morphing wing technologies aero-structural interactions studies ». Communication lors de la conférence : BIT’s 4th Annual World Congress of Smart Materials – 2018 on the Theme: Weaving an Avatar Dream Together (WCSM) (Osaka, Japan, Mar. 06-08, 2018). Botez, Ruxanda. 2018. « Optimized neural network applications for aircraft engine modeling ». Communication lors de la conférence : 29th European Conference on Operational Research (EURO) (Valencia, Espagne, July 08-11, 2018). Botez, Ruxanda. 2018. « Présentation de la gestion des projets académiques au LARCASE à l’ÉTS ». Communication lors de la conférence : Montreal Section: Communauté de Pratique Aéronautique et Transport aérien du PMI (Montréal, QC, Canada, 12 sept. 2018). Botez, Ruxanda. 2018. « Romanian Aces during the two World Wars ». Communication lors de la conférence : 100 Years of Aviation in Romania Conference (Bucharest, Romania, Oct. 24, 2018). Botez, Ruxanda. 2018. « Simulation model of the unmanned aerial systems UAS-S4 Ehecatl and UAS-S45 Báalam ». Communication lors de la conférence : The 6th International Workshop on Numerical Modelling in Aerospace Sciences (NMAS) (Bucharest, Romania, May 16-17, 2018). Botez, Ruxanda. 2018. « Various wing morphing technologies simulation and experimental tests research ». Communication lors de la conférence : International Conference of Aerospace Sciences (AEROSPATIAL) (Bucharest, Romania, Oct. 25-26, 2018).
Botez, Ruxandra Mihaela.
2018.
« Green aircraft minimum fuel consumption methodologies ».
In Global and Regional in Environmental Protection GLOREP 2108 (Timisoara, Romania, Nov. 15-17, 2018)
pp. 14-16.
Editura Politehnica.
Boton, Conrad.
2018.
« Supporting constructability analysis meetings with Immersive Virtual Reality-based collaborative BIM 4D simulation ».
Automation in Construction, vol. 96.
pp. 1-15.
Boton, Conrad et Forgues, Daniel.
2018.
« A systemic approach for BIM-based collaboration study in construction ».
In 6th International Workshop When Social Science Meets Lean and BIM (Huddersfield, UK, Jan. 8-9, 2018)
University of Huddersfield.
Boton, Conrad et Forgues, Daniel.
2018.
« Comprendre l’impact du numérique sur la gestion de projet en construction ».
Lien social et Politiques, nº 81.
pp. 41-60.
Boton, Conrad et Forgues, Daniel.
2018.
« Practices and processes in BIM projects: An exploratory case study ».
Advances in Civil Engineering, vol. 2018.
Boton, Conrad, Forgues, Daniel et Halin, Gilles.
2018.
« A framework for Building Information Modeling implementation in engineering education ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 45, nº 10.
pp. 866-877.
Boton, Conrad, Rivest, Louis, Forgues, Daniel et Jupp, Julie R..
2018.
« Comparison of shipbuilding and construction industries from the product structure standpoint ».
International Journal of Product Lifecycle Management, vol. 11, nº 3.
pp. 191-220.
Bouachir, Wassim, Gouiaa, Rafik, Li, Bo et Noumeir, Rita.
2018.
« Intelligent video surveillance for real-time detection of suicide attempts ».
Pattern Recognition Letters, vol. 110.
pp. 1-7.
Bouchami, Anoir, Elsayed, Mohannad Y. et Nabki, Frederic.
2018.
« A 1.4-mW 14-MHz MEMS oscillator based on a differential adjustable-bandwidth transimpedance amplifier and piezoelectric disk resonator ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 65, nº 10.
pp. 3414-3423. Bouchet, M., Gauthier, M., Maire, M., Ajji, A. et Lerouge, S.. 2018. « A predictive analytical model for compliant small-diameter vascular grafts ». Affiche présentée lors de la conférence : 34th Annual Meeting of the Canadian Biomaterials Society (Victoria, BC, Canada, May 16-19, 2018). Bouchet, M., Gauthier, M., Maire, M., Ajji, A. et Lerouge, S.. 2018. « A simple analytical model for the development of small-diameter vascular prostheses ». Affiche présentée lors de la conférence : ISB Congress 2018 (Montreal, QC, Canada, Aug. 13-15, 2018).
Bouhelal, A., Smaili, A., Guerri, O., Bouhelal, A. et Masson, C..
2018.
« Numerical investigation of turbulent flow around a recent horizontal axis wind Turbine using low and high Reynolds models ».
Journal of Applied Fluid Mechanics, vol. 11, nº 1.
pp. 151-164.
Bouhelal, Abdelhamid, Guerri, Ouahiba, Smaili, Arezki et Masson, Christian.
2018.
« Contribution to the aerodynamic study of the air-sand flow around a wind turbine blade installed in desert environment of Algeria ».
In 2018 International Conference on Wind Energy and Applications in Algeria (ICWEAA) (Algiers, Algeria, Nov. 6-7, 2018)
Piscataway, NJ, USA : IEEE. Boujia, N., Schmidt, F., Chevalier, C., Pham Van Bang, D. et Siegert, D.. 2018. « Bridge scour monitoring technique using the vibratory response of rods embedded in the river bed ». Communication lors de la conférence : 7th Transport Research Arena – TRA (Vienna, Austria, Apr. 16-19, 2018).
Boukerma, Hanane, Choisy, Christophe, Benouareth, Abdallah, Farah, Nadir et Cheriet, Mohamed.
2018.
« Hybrid two-dimensional recognizer based on the NSHP-HMM model ».
In 2018 16th International Conference on Frontiers in Handwriting Recognition (ICFHR) (Niagara Falls, ON, Canada, Aug. 5-8, 2018)
pp. 582-586.
Los Alamitos, CA, USA : IEEE Computer Society.
Boukerma, Hanene, Choisy, Christophe, Farah, Nadir et Cheriet, Mohamed.
2018.
« Baseline-based zoning design for the NSHPZ-HMM 2-D model applied to Arabic script ».
In 2nd IEEE International Workshop on Arabic and Derived Script Analysis and Recognition (ASAR 2018) (London, United kingdom, Mar. 12- 14, 2018)
pp. 41-46.
IEEE.
Boukerma, Hanene, Choisy, Christophe, Farah, Nadir et Cheriet, Mohamed.
2018.
« The efficiency of the NSHPZ-HMM: theoretical and practical study ».
Applied Intelligence, vol. 48, nº 12.
pp. 4660-4677. Boukherroub, T., Ruiz, A., LeBel, L. et Rönnqvist, M.. 2018. « Sustainable forest products supply chain management: lessons learned in the province of Québec ». Communication lors de la conférence : 59th Canadian Operational Research Society Annual Conference (Halifax, NS, Canada, June 4-9, 2018).
Boukherroub, Tasseda, D'Amours, Sophie et Rönnqvist, Mikael.
2018.
« Sustainable forest management using decision theaters: Rethinking participatory planning ».
Journal of Cleaner Production, vol. 179.
pp. 567-580.
Boukherroub, Tasseda, Ouellet, Lysane, Lemay, Guillaume, Bibeau, Nathalie, Thiffault, Diane et McNeil, Nicole.
2018.
« Améliorer l’accès aux services psychosociaux de première ligne pour les jeunes en difficulté en utilisant l’approche Lean : cas du CIUSSS Centre-Sud-de-l’île-de-Montréal ».
In 9ème Conférence Francophone en gestion et ingénierie des systèmes hospitaliers : La santé, malade de ses coûts? : Les systèmes, les réseaux et les établissements de santé en quête de performance (Geneva, Switzerland, 27-29 août 2018)
Hôpitaux Universitaires Genève.
Bouktif, Salah, Fiaz, Ali, Ouni, Ali et Serhani, Mohamed Adel.
2018.
« Optimal deep learning LSTM model for electric load forecasting using feature selection and genetic algorithm: Comparison with machine learning approaches ».
Energies, vol. 11, nº 7.
Bourgeois, François-René, Monette, Frédéric et Cyr, Daniel G..
2018.
« Operational modifications for the development of nitrifying bacteria in a large-scale biological aerated filter and its impact on wastewater treatment ».
Water Science and Technology, vol. 78, nº 8.
pp. 1704-1714.
Bouserhal, Rachel E., Chabot, Philippe, Sarria-Paja, Milton, Cardinal, Patrick et Voix, Jérémie.
2018.
« Classification of nonverbal human produced audio events: A pilot study ».
In 19th Annual Conference of the International Speech Communication (INTERSPEECH 2018) (Hyderabad, India, Sept. 02-06, 2018)
pp. 1512-1516.
International Speech Communication Association. Bouserhal, Rachel, Sarria-Paja, Milton, Cardinal, Patrick et Voix, Jérémie. 2018. « Classification of nonverbal human produced audio events: a pilot study ». Communication lors de la conférence : Workshop on machine hearing and learning (Montreal, QC, Canada, Sept. 21, 2018).
Bouslah, Bassem, Gharbi, Ali et Pellerin, Robert.
2018.
« Joint production, quality and maintenance control of a two-machine line subject to operation-dependent and quality-dependent failures ».
International Journal of Production Economics, vol. 195.
pp. 210-226.
Boussabnia, Mohamed Mounir, Vaillancourt, Michel et Perraton, Daniel.
2018.
« Mastic bitumineux incorporant du filler de verre postconsommation et essai RCA ».
Via Bitume, vol. 13, nº 3.
pp. 41-44.
Bouzid, A., Songmene, V. et Kenné, J. P..
2018.
« Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ».
In 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018)
pp. 294-300.
Comite Africain de Metrologie.
Bouzid, Abdel-Hakim et Pourreza, Mohammad.
2018.
« Analytical evaluation of residual stresses in the transition zone of expanded tube-to-tubesheet joints ».
In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Bouzid, Abdel-Hakim et Zhu, L.inbo.
2018.
« A study of neighbouring tube expansion effect on the residual contact pressure of tube-to-tubesheet joints ».
International Journal of Pressure Vessels and Piping, vol. 165.
pp. 185-192.
Bouzidi, EL Hocine, Luong, Duc-Hung, Outtagarts, Abdelkader, Hebbar, Abdelkrim et Langar, Rami.
2018.
« Online-based learning for predictive network latency in software-defined networks ».
In IEEE Global Communications Conference (GLOBECOM) (Abu Dhabi, UAE, Dec. 09-13, 2018)
IEEE.
Brahmi, Brahim, Saad, Maarouf, Brahmi, Abdelkrim, Luna, Cristobal Ochoa et Rahman, Mohammad Habibur.
2018.
« Compliant control for wearable exoskeleton robot based on human inverse kinematics ».
International Journal of Advanced Robotic Systems, vol. 15, nº 6.
Brahmi, Brahim, Saad, Maarouf, Lam, Jacqueline Tu Anh Thu, Luna, Cristobal Ochoa, Archambault, Philippe S. et Rahman, Mohammad H..
2018.
« Adaptive control of a 7-DOF exoskeleton robot with uncertainties on kinematics and dynamics ».
European Journal of Control, vol. 42.
pp. 77-87.
Brahmi, Brahim, Saad, Maarouf, Ochoa Luna, Cristobal, Archambault, Philippe S. et Rahman, Mohammad H..
2018.
« Passive and active rehabilitation control of human upper-limb exoskeleton robot with dynamic uncertainties ».
Robotica, vol. 36, nº 11.
pp. 1757-1779.
Brahmi, Brahim, Saad, Maarouf, Ochoa Luna, Cristobal, Rahman, Mohammad Habibur et Brahmi, Abdelkrim.
2018.
« Adaptive tracking control of an exoskeleton robot with uncertain dynamics based on estimated time delay control ».
IEEE/ASME Transactions on Mechatronics, vol. 23, nº 2.
pp. 575-585.
Brahmi, Brahim, Saad, Maarouf, Ochoa-Luna, Cristobal, Di Gennero, Stefano et Rahman, Mohammed H..
2018.
« A new integral second-order terminal sliding mode control with time delay estimation for an exoskeleton robot with dynamics uncertainties ».
In Proceedings of the 5th International Conference of Control, Dynamic Systems, and Robotics (CDSR'18) (Niagara Falls, ON, Canada, June 7-9, 2018)
International ASET Inc..
Brahmi, Brahim, Saad, Maarouf, Ochoa-Luna, Cristobal, Rahman, Mohammad H. et Di Gennaro, Stefano.
2018.
« Adaptive control of upper limb exoskeleton robot based on a new modified Function Approximation Technique (FAT) ».
In 2018 European Control Conference (ECC) (Limassol, Cyprus, June 12-15, 2018)
pp. 608-613.
Piscataway, NJ, USA : IEEE.
Brassard, D., Dubé, M. et Tavarez, J..
2018.
« Conductive nanocomposites as heating elements for resistance welding ».
In 6th International Carbon Composites Conference (IC3) (Arcachon, France, June 04-06, 2018)
Brini, Oussama, Deslandes, Dominic et Nabki, Frederic.
2018.
« A model-based approach for the design of ultra-low power wireless sensor nodes ».
In 2018 16th IEEE International New Circuits and Systems Conference (NEWCAS) (Montréal, QC, Canada, June 24-27, 2018)
pp. 248-251.
IEEE.
Brionne, Gary, Loucif, Abdelhalim, Zhang, Chunping, Lapierre-Boire, Louis-Philippe et Jahazi, Mohammad.
2018.
« 3D FEM simulation of the effect of cooling rate on SDAS and macrosegregation of a high strength steel ».
In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 2360-2364.
Trans Tech Publications Ltd. Brissette, François, Martel, Jean-Luc, Bertrand, Victor, Vandal, Magali et Arsenault, Richard. 2018. « Recent trends in precipitation, temperature and streamflow extremes - from gauges to reanalysis to climate models - impact of spatial scale ». Communication lors de la conférence : 8th GEWEX Science Conference (Canmore, AB, Canada, May 6-11,2018).
Brooke, Daniel, Umnova, O., Elliott, A. S., Leclaire, P. et Dupont, T..
2018.
« Interaction of high amplitude waves with acoustic metamaterials ».
In ACOUSTICS 2018 - ACWSTEG 2018 (Cardiff, UK, Apr. 23-24, 2018)
Coll. « Proceedings of the Institute of Acoustics », vol. 40.
pp. 159-166.
Institute of Acoustics. Brown, C., Samson, C. et Ernst, R.E.. 2018. « Coincident gravity and magnetic surveys over lava tubes in support of future astrobiological exploration missions ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Mar. 23-25, 2018).
Brown, David A., Nadarajah, Sivakumaran, Hong, Yang, Castonguay, Patrice, Raiesi, Hassan, Sermeus, Kurt et Germain, Patrick.
2018.
« A linear elasticity mesh mover with adaptive mesh element stiffening for multi-element unstructured grids ».
In AIAA Aerospace Sciences Meeting (Kissimmee, FL, USA, Jan. 08-12, 2018)
Coll. « AIAA Paper », vol. AIAA 2018-0917.
American Institute of Aeronautics and Astronautics.
Brun, André L., Britto, Alceu S., Oliveira, Luiz S., Enembreck, Fabricio et Sabourin, Robert.
2018.
« A framework for dynamic classifier selection oriented by the classification problem difficulty ».
Pattern Recognition, vol. 76.
pp. 175-190.
Buddhadasa, Madhuwanthi, Lerouge, Sophie et Girard-Lauriault, Pierre-Luc.
2018.
« Plasma polymer films to regulate fibrinogen adsorption: Effect of pressure and competition with human serum albumin ».
Plasma Processes and Polymers, vol. 15, nº 9.
Bureau, Nathalie J., Deslauriers, Maguy, Lepage-Saucier, Marianne, Rouleau, Dominique M., Roy, André, Tétreault, Patrice et Hagemeister, Nicola.
2018.
« Rotator cuff tear morphologic parameters at magnetic resonance imaging: Relationship with muscle atrophy and fatty infiltration and patient-reported function and health-related quality of life ».
Journal of Computer Assisted Tomography, vol. 42, nº 5.
pp. 784-791.
Butelle, Franck et Coti, Camille.
2018.
« Distributed snapshot for rollback-recovery with one-sided communications ».
In International Conference on High Performance Computing and Simulation, HPCS (Orleans, France, July 16-20, 2018)
pp. 614-620.
Institute of Electrical and Electronics Engineers Inc..
Caggiano, Alessandra, Rimpault, Xavier, Teti, Roberto, Balazinski, Marek, Chatelain, Jean-Francois et Nele, Luigi.
2018.
« Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly ».
CIRP Annals, vol. 67, nº 1.
pp. 483-486. Cagnin, A., de Polo, L., Bureau, N., Choinière, M., Durand, M. et Hagemeister, N.. 2018. « Does the radiographic severity of knee osteoarthritis correlate with the duration of symptoms, pain intensity and medication use? ». Communication lors de la conférence : 2018 OARSI World Congress on Osteoarthritis (Liverpool, UK, Apr. 26-29, 2018). Cagnin, A., de Polo, L., Bureau, N., Choinière, M., Durand, M. et Hagemeister, N.. 2018. « Knee 3D kinematics differ in a large cohort of knee osteoarthrtis patients based on their radiographic severity ». Communication lors de la conférence : 2018 OARSI World Congress on Osteoarthritis (Liverpool, UK, Apr. 26-29, 2018). Cagnin, A., de Polo, L., Bureau, N., Choinière, M., Durand, M. et Hagemeister, N.. 2018. « Mental healthrelated quality of life and work performance in adults with knee osteoarthritis ». Communication lors de la conférence : 2018 OARSI World Congress on Osteoarthritis (Liverpool, UK, Apr. 26-29, 2018). Cagnin, A., de Polo, L., Bureau, N., Choinière, M., Durand, M. et Hagemeister, N.. 2018. « Self-management and functional status in adults with early to late stage knee osteoarthritis ». Communication lors de la conférence : 2018 OARSI World Congress on Osteoarthritis (Liverpool, UK, Apr. 26-29, 2018).
Cambron, P., Masson, C., Tahan, A. et Pelletier, F..
2018.
« Control chart monitoring of wind turbine generators using the statistical inertia of a wind farm average ».
Renewable Energy, vol. 116, nº B.
pp. 88-98.
Candanedo, José A., Saberi-Derakhtenjani, Ali, D'Avignon, Katherine et Athienitis, Andreas K..
2018.
« A pathway for the derivation of control-oriented models for radiant floor applications ».
In eSim 2018 (Montreal, QC, Canada, May 09-10, 2018)
Cantin, Sébastien, Morency, François et Garnier, François.
2018.
« Numerical simulation of contrail ice particle growth in the near field of an aircraft engine ».
In Proceedings of GPPS Forum 18 (Montreal, QC, Canada, May 07-09, 2018)
Global Power and Propulsion Society.
Cao, Hongliu, Bernard, Simon, Heutte, Laurent et Sabourin, Robert.
2018.
« Dissimilarity-based representation for radiomics applications ».
In Proceedings of the International Conference on Pattern Recognition and Artificial Intelligence (ICPRAI'2018) (Montréal, QC, Canada, May 13-17, 2018)
pp. 53-58.
CENPARMI, Concordia University.
Cao, Hongliu, Bernard, Simon, Heutte, Laurent et Sabourin, Robert.
2018.
« Dynamic voting in multi-view learning for radiomics applications ».
In Structural, Syntactic, and Statistical Pattern Recognition : Joint IAPR International Workshop, S+SSPR 2018 (Beijing, China, Aug. 17-19, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11004.
pp. 32-41.
Springer Verlag.
Cao, Hongliu, Bernard, Simon, Heutte, Laurent et Sabourin, Robert.
2018.
« Improve the performance of transfer learning without fine-tuning using dissimilarity-based multi-view learning for breast cancer histology images ».
In Image Analysis and Recognition : 15th International Conference : ICIAR 2018 : Proceedings (Póvoa de Varzim, Portugal, June 27-29, 2018)
Coll. « Lecture Notes in Computer Science », vol. 10882.
pp. 779-787.
Springer.
Cappai, Francesco, Forgues, Daniel et Glaus, Mathias.
2018.
« Socio-economic indicators for the ex-post evaluation of Brownfield rehabilitation: A case study ».
Urban Science, vol. 2, nº 4.
Cappai, Francesco, Forgues, Daniel et Glaus, Mathias.
2018.
« The integration of socio-economic indicators in the CASBEE-UD evaluation system: A case study ».
Urban Science, vol. 2, nº 1.
Carass, Aaron, Cuzzocreo, Jennifer L., Han, Shuo, Hernandez-Castillo, Carlos R., Rasser, Paul E., Ganz, Melanie, Beliveau, Vincent, Dolz, Jose, Ben Ayed, Ismail, Desrosiers, Christian, Thyreau, Benjamin, Romero, José E., Coupé, Pierrick, Manjón, José V., Fonov, Vladimir S., Collins, D. Louis, Ying, Sarah H., Onyike, Chiadi U., Crocetti, Deana, Landman, Bennett A., Mostofsky, Stewart H., Thompson, Paul M. et Prince, Jerry L..
2018.
« Comparing fully automated state-of-the-art cerebellum parcellation from magnetic resonance images ».
NeuroImage, vol. 183.
pp. 150-172.
Carbonneau, Marc-André, Cheplygina, Veronika, Granger, Eric et Gagnon, Ghyslain.
2018.
« Multiple instance learning: A survey of problem characteristics and applications ».
Pattern Recognition, vol. 77.
pp. 329-353. Carillo, K., Doutres, O. et Sgard, F.. 2018. « Experimental validation of an impedance tube measurement method for assessing earplugs insertion loss ». Communication lors de la conférence : NHCA 2018 : National Hearing Conservation Association Annual Conference (Orlando, FL, USA, Feb. 15-17, 2018).
Carillo, K., Sgard, F. et Doutres, O..
2018.
« Numerical study of the broadband vibro-acoustic response of an earmuff ».
Applied Acoustics, vol. 134.
pp. 25-33.
Carioli, Johan, Delnavaz, Aidin, Zednik, Ricardo J. et Voix, Jérémie.
2018.
« Piezoelectric earcanal bending sensor ».
IEEE Sensors Journal, vol. 18, nº 5.
pp. 2060-2067.
Cariou, Pierre, Cheaitou, Ali, Larbi, Rim et Hamdan, Sadeque.
2018.
« Liner shipping network design with emission control areas: A genetic algorithm-based approach ».
Transportation Research Part D: Transport and Environment, vol. 63.
pp. 604-621.
Carret, J. C., Di Benedetto, H. et Sauzéat, C..
2018.
« Back analysis of impact loadings on viscoelastic specimen ».
In 10th International Conference on Road and Airfield Pavement Technology (ICPT 2017) (Hong Kong, China, Aug. 08-10, 2017)
Carret, Jean-Claude. 2018. « Linear viscoelastic characterization of bituminous mixtures from dynamic tests back analysis ». Thèse de doctorat. France, École Nationale des Travaux Publics de l’État, Université de Lyon Carret, Jean-Claude, Di Benedetto, Hervé et Sauzéat, Cédric. 2018. « Back analysis of impact loadings on viscoelastic specimen ». Communication lors de la conférence : 10th International Conference on Road and Airfield Pavement Technology (ICPT 2017) (Hong Kong, China, Aug. 08-10, 2017).
Carret, Jean-Claude, Di Benedetto, Hervé et Sauzéat, Cédric.
2018.
« Characterization of asphalt mixes behaviour from dynamic tests and comparison with conventional cyclic tension-compression tests ».
Applied Sciences, vol. 8, nº 11.
Carret, Jean-Claude, Di Benedetto, Herve et Sauzeat, Cedric.
2018.
« Multi modal dynamic linear viscoelastic back analysis for asphalt mixes ».
Journal of Nondestructive Evaluation, vol. 37, nº 2.
Carret, Jean-Claude, Pedraza, Alvaro, Di Benedetto, Hervé et Sauzeat, Cédric.
2018.
« Comparison of the 3-dim linear viscoelastic behavior of asphalt mixes determined with tension-compression and dynamic tests ».
Construction and Building Materials, vol. 174.
pp. 529-536. Castaneda-Gonzalez, Mariana, Poulin, Annie, Romero-Lopez, Rabindranarth, Arsenault, Richard, Brissette, François, Chaumont, Diane et Paquin, Dominique. 2018. « Impacts of regional climate model spatial resolution on summer flood simulation ». Communication lors de la conférence : 13th International Conference on Hydroinformatics (HIC) (Palermo, Italy, July 1-6, 2018).
Castaneda-Gonzalez, Mariana, Poulin, Annie, Romero-Lopez, Rabindranarth, Arsenault, Richard, Brissette, François, Chaumont, Diane et Paquin, Dominique.
2018.
« Impacts of regional climate model spatial resolution on summer flood simulation ».
In 13th International Conference on Hydroinformatics (HIC) (Palermo, Italy, July 1-6, 2018)
Coll. « EPiC Series in Engineering », vol. 3.
pp. 372-380.
Castellon, J., Eesaee, M., David, E., Demarquette, N. et Fréchette, M..
2018.
« Dielectric properties of LDPE/clay nanocomposites ».
In 12th International Conference on the Properties and Applications of Dielectric Materials (ICPADM) (Xi'an, China, May 20-24, 2018)
pp. 49-52.
Piscataway, NJ, USA : IEEE.
Causse, P. et Trochu, F..
2018.
« Combined characterization of pore size distribution and permeability in fibrous textiles by capillary flow porometry ».
In 14th International Conference on Flow Processing in Composite Materials (Lulea, Switzerland, May 30 - June 01, 2018)
Causse, Philippe, Ravey, Christophe et Trochu, François.
2018.
« Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding ».
Journal of Composites Science, vol. 2, nº 2.
Cavka, Hasan Burak, Staub-French, Sheryl et Poirier, Erik A..
2018.
« Levels of BIM compliance for model handover ».
Journal of Information Technology in Construction, vol. 23.
pp. 243-258.
Chaallal, Omar.
2018.
« Matériaux composites en PRF : Renforcement des structures existantes en béton armé / Calcul selon les normes canadiennes ».
Presses de l'Université du Québec. 464 p.
Chaddad, Ahmad, Desrosiers, Christian et Niazi, Tamim.
2018.
« Deep radiomic analysis of MRI related to Alzheimer's disease ».
IEEE Access, vol. 6.
pp. 58213-58221.
Chadha, K., Ahmed, Z., Aranas, C., Shahriari, D. et Jahazi, M..
2018.
« Influence of strain rate on dynamic transformation of austenite in an as-cast medium-carbon low-alloy steel ».
Materialia, vol. 1.
pp. 155-167.
Chakravorty, Tanushri, Bilodeau, Guillaume-Alexandre et Granger, Éric.
2018.
« Tracking using numerous anchor points ».
Machine Vision and Applications, vol. 29, nº 2.
pp. 247-261.
Chamkha, Nadia, Sellami, Asma et Abran, Alain.
2018.
« Automated COSMIC measurement of Java swing applications throughout their development life cycle ».
In Proceedings of the Academic Papers at IWSM Mensura 2018 "COSMIC Function Points - Fundamentals for Software Effort Estimation" held in conjunction with The China Software Cost Measurement Conference (CSCM 2018) (Beijing, China, Sept. 19-20, 2018)
Coll. « CEUR Workshop Proceedings », vol. 2207.
pp. 20-33.
CEUR-WS.
Champliaud, Henri et Feng, Zhengkun.
2018.
« Numerical and experimental comparisons of pressed blades for large Francis turbine runners manufactured with a reconfigurable pressing setup and a conventional setup ».
International Journal of Service and Computing Oriented Manufacturing (IJSCOM), vol. 3, nº 4.
pp. 293-317.
Champliaud, Henri, Vieillot, Valentin, Provencher, David et Lê, Ngan Van.
2018.
« Rapid 3D shape forming computation with piecewise heating lines using a fifth order spline formulation ».
In 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018)
pp. 204-209.
Dime University of Genoa.
Charbonneau, P., Chitour, M. A., Robert, T., Saint-Pierre Cote, S., Aissaoui, R. et Labbe, D. R..
2018.
« Evaluation of the impact of a virtual self-avatar on gait parameters ».
Annals of Physical and Rehabilitation Medicine, vol. 61, nº suppl..
e65-e66.
Charbonneau, Philippe, Chitour, Mohamed Amir, Robert, Thomas, Saint-Pierre Côté, Sara, Aissaoui, Rachid et Labbé, David R..
2018.
« Evaluating the impact of a virtual self-avatar on spatiotemporal gait parameters ».
In 23rd Annual CyberPsychology, CyberTherapy & Social Networking Conference (CyPsy) (Gatineau, QC, Canada, June 26-28, 2018)
Charbonneau, Philippe, Chitour, Mohamed-Amir, Robert, Thomas, Saint-Pierre Côté, Sara, Aissaoui, Rachid et Labbé, David R.. 2018. « Évaluation de l'impact d'un ego-avatar temps réel sur la marche ». Affiche présentée lors de la conférence : Journée scientifique REPAR-INTER 2018 (Québec, QC, Canada, 11 mai 2018). Chartofylaka, L., Fraser, M., Stockless, A., Psyché, V. et Forissier, T.. 2018. « ICT’s perspectives in context-driven learning initiatives: using a collaboration platform for research in primary education ». Communication lors de la conférence : International Conference of Research in Teaching, Education & Learning (Athens , Greece, July 17-18, 2018).
Chauvin, Laurent, Kumar, Kuldeep, Desrosiers, Christian, de Guise, Jacques et Toews, Matthew.
2018.
« Diffusion Orientation Histograms (DOH) for diffusion weighted image analysis ».
In Computational Diffusion MRI : MICCAI Workshop, Québec, Canada, September 2017 (Montreal, QC, Canada, Sept. 10, 2017)
Coll. « Mathematics and Visualization »
pp. 91-99.
Springer International Publishing.
Cheaitou, Ali, Larbi, Rim et Hamdan, Sadeque.
2018.
« Liner shipping routing, fleet sizing and speed optimization with application to Asia - Northern Europe-trade ».
In 4th IEEE International Conference on Logistics Operations Management (Le Havre, France, Apr. 10-12, 2018)
Institute of Electrical and Electronics Engineers.
Chen, C. M., Sinclair, L. E., Fortin, R., Coyle, M. et Samson, C..
2018.
« Flight performance of the Advanced Radiation Detector for UAV operations (ARDUO) ».
In 17th Symposium on radiation measurements and applications (SORMA XVII) (Ann Arbor, MI, USA, June 11-14, 2018)
Chen, C. M., Sinclair, L. E., Samson, C. et Fortin, R.. 2018. « Performance of UAV-borne gamma spectrometers for radiometric surveying in mineral exploration and environmental monitoring ». Affiche présentée lors de la conférence : 9th Annual Minerals Colloquium, PDAC International Convention (Toronto, ON, Canada, Mar. 05, 2018).
Chen, Jianqiang, Demers, Vincent, Turner, Daniel P. et Bocher, Philippe.
2018.
« Experimental investigation on high-cycle fatigue of inconel 625 superalloy brazed joints ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 49A, nº 4.
pp. 1244-1253.
Chen, Jie, Brissette, François P. et Chen, Hua.
2018.
« Using reanalysis-driven regional climate model outputs for hydrology modelling ».
Hydrological Processes, vol. 32, nº 19.
pp. 3019-3031.
Chen, Jie, Li, Chao, Brissette, François P., Chen, Hua, Wang, Mingna et Essou, Gilles R. C..
2018.
« Impacts of correcting the inter-variable correlation of climate model outputs on hydrological modeling ».
Journal of Hydrology, vol. 560.
pp. 326-341.
Chen, L. M., Yao, N., Garg, E., Zhu, Y., Nguyen, T. T. T., Pokhvisneva, I., Hari Dass, S. A., Unternaehrer, E., Gaudreau, H., Forest, M., McEwen, L. M., MacIsaac, J. L., Kobor, M. S., Greenwood, C. M. T., Silveira, P. P., Meaney, M. J. et O'Donnell, K. J..
2018.
« PRS-on-Spark (PRSoS): A novel, efficient and flexible approach for generating polygenic risk scores ».
BMC Bioinformatics, vol. 19, nº 1.
Cheng, A. P., Burnham, P., Dadhania, D., Lee, J. R., Suthanthiran, M. et De Vlaminck, I.. 2018. « Distinguishing infection from infectious disease using methylation marks comprised within cell-free DNA ». Communication lors de la conférence : American Society of Human Genetics Annual Meeting (San Diego, CA, USA, Oct. 16-20, 2018).
Cheng, Matthew P., Cheng, Alexandre P. et Lee, Todd C..
2018.
« The reply ».
American Journal of Medicine, vol. 131, nº 4.
Chenitz, Régis, Kramm, Ulrike I., Lefèvre, Michel, Glibin, Vassili, Zhang, Gaixia, Sun, Shuhui et Dodelet, Jean-Pol.
2018.
« A specific demetalation of Fe-N4 catalytic sites in the micropores of NC-Ar + NH3 is at the origin of the initial activity loss of the highly active Fe/N/C catalyst used for the reduction of oxygen in PEM fuel cells ».
Energy and Environmental Science, vol. 11, nº 2.
pp. 365-382.
Cherif, Mohamed Lajmi, Leclere, Jérôme et Landry, René Jr..
2018.
« Loosely coupled GPS/INS integration with snap to road for low-cost land vehicle navigation: EKF-STR for low-cost applications ».
In IEEE/ION Position, Location and Navigation Symposium (PLANS 2018) (Monterey, CA, USA, Apr. 23-26, 2018)
Piscataway, NJ, USA : IEEE.
Cherifi, Ahmed et Gardoni, Mickaël.
2018.
« Triz in ecodesign: an alternative in the choice of environmental solutions without pollution transfer ».
In 18th International TRIZ Future Conference (TFC) (Strasbourg, France, Oct. 29–31, 2018)
Cherrier, Sylvain et Langar, Rami.
2018.
« Services organisation in IoT: Mixing Orchestration and Choreography ».
In Global Information Infrastructure and Networking Symposium (GIIS) (Thessaloniki, Greece, Oct. 23-25, 2018)
IEEE. Chevalier, C., Boujia, N., Schmidt, F., Pham Van Bang, D. et Siegert, D.. 2018. « Dynamic monitoring of scour around bridge pier ». Communication lors de la conférence : 9th International Conference on Scour and Erosion (Taipei, Taiwan, Nov. 05-08, 2018). Chevalier, C., Kotelon, M. C., Reiffsteck, P., Minatchy, C., Fanelli, S. et Pham Van Bang, D.. 2018. « A better characterisation of sediment sensitivity to erosion by Wheel Erosion Test (WET) ». Communication lors de la conférence : 9th International Conference on Scour and Erosion (Taipei, Taiwan, Nov. 05-08, 2018). Chevalier, C., Larrarte, F., Schmidt, F., Pham Van Bang, D., Durand, E., Gondret, P., De La Roque, S., Cheetham, M. et Hosseingholian, M.. 2018. « Research program SSHEAR : recent advances on the understanding and the control of scour phenomena ». Communication lors de la conférence : 9th International Conference on Scour and Erosion (Taipei, Taiwan, Nov. 05-08, 2018).
Chevalier, Christophe, Larrarte, Frédérique, Schmidt, Franziska, Pham Van Bang, Damien, Durand, Edouard, Gondret, Philippe, De La Roque, Sidoine, Cheetham, Mark et Hosseingholian, Mohsen.
2018.
« Projet ANR-SSHEAR: développements récents sur la comprehension et la maitrise des risques d’affouillements ».
In 9èmes Journées Nationales de Géotechnique et de Géologie de l'Ingénieur (JNGG( : Ressources et aménagement : quelles limites? (Champs sur Marne, France, 13-15 juin 2018)
Ifsttar.
Chit Dirani, Hind, Merkhouf, Arezki, Kedjar, Bachir, Giroux, Anne-Marie et Al Haddad, Kamal.
2018.
« Rotor inter-turn short circuit impact on large hydro generator magnetic quantities ».
IEEE Transactions on Industry Applications, vol. 54, nº 4.
pp. 3702-3711.
Chit-Dirani, Hind, Merkhouf, Arezki, Giroux, Anne Marie, Kedjar, Bachir et Al-Haddad, Kamal.
2018.
« Impact of real air-gap non uniformity on the electromagnetic forces of a large hydro generator ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 11.
pp. 8464-8475. Chitour, M. A., Charbonneau, P., Thomas, R., Labbé, D. et Aissaoui, R.. 2018. « Analyse des paramètres spatiotemporels de la marche sur un tapis roulant instrumenté à deux voies à vitesse fixe et en mode haptique chez le sujet valide ». Communication lors de la conférence : 38ème journée de la recherche du POES et de la Division d’orthopédie de l’Université de Montréal (Montreal, QC, Canada, 4 mai 2018). Chitour, M. A., Charbonneau, P., Thomas, R., Labbé, D. et Aissaoui, R.. 2018. « Analysis of spatio-temporal parameters during gait on a double belt instrumented treadmill in fixed speed and self-paced mode in healthy adults ». Affiche présentée lors de la conférence : 39th SICOT Orthopaedic World Congress (Montreal, QC, Canada, Oct. 10-13, 2018). Chitour, M.A., Charbonneau, P., Thomas, R., Labbé, D. et Aissaoui, R.. 2018. « Analyse des paramètres spatio-temporels de la marche sur un tapis roulant instrumenté à deux voies à vitesse fixe et en mode haptique chez le sujet valide ». Affiche présentée lors de la conférence : 20e congrès annuel des étudiants, résidents et stagiaires du CRCHUM (Montreal, QC, Canada, 14 mai 2018).
Chossat, Jean-Baptiste, Maslyczyk, Alexis, Lavertu, Jean-Simon et Duchaine, Vincent.
2018.
« The programmable permanent magnet actuator: A paradigm shift in efficiency for low-speed torque-holding robotic applications ».
IEEE Robotics and Automation Letters, vol. 3, nº 3.
pp. 1751-1758.
Chouman, Hussein, Lourdiane, Mounia, Tremblay, Christine, Adhekari, Bibechana, Ware, Cedric et Lepers, Catherine.
2018.
« 10-100 Gbit/s mixed-line-rate experimental demonstration ».
In 2018 Photonics North (PN) (Montreal, QC, Canada, June 05-07, 2018)
Chowdhury, Rasheda Arman, Pellegrino, Giovanni, Aydin, Umit, Lina, Jean-Marc, Dubeau, François, Kobayashi, Eliane et Grova, Christophe.
2018.
« Reproducibility of EEG-MEG fusion source analysis of interictal spikes: Relevance in presurgical evaluation of epilepsy ».
Human Brain Mapping, vol. 39, nº 2.
pp. 880-901.
Chuitcheu, James William, Texier, Damien et Bocher, Philippe.
13 mars 2018.
« Determining Properties of Materials at High Temperatures ».
[Article de recherche]. Substance ÉTS.
Chuitcheu, James William, Texier, Damien et Bocher, Philippe.
13 mars 2018.
« Déterminer les propriétés des matériaux à haute température ».
[Article de recherche]. Substance ÉTS.
Chuitcheu, James William, Texier, Damien et Bocher, Philippe.
4 avril 2018.
« Hot Tensile Strength Micromachine for Aeronautics ».
[Article de recherche]. Substance ÉTS.
Chuitcheu, James William, Texier, Damien et Bocher, Philippe.
4 avril 2018.
« Une micromachine de traction à chaud pour l’aéronautique ».
[Article de recherche]. Substance ÉTS.
Clément, J., Charbonneau, M. et Thompson, M.. 2018. « Elite swimming performance analysis from IMU data - Instantaneous velocity and stroke count preliminary validation ». Affiche présentée lors de la conférence : SPort INnovation (SPIN) Summit (Montreal, QC, Canada, Oct. 31-Nov. 2, 2018).
Clément, Julien, de Guise, Jacques A., Fuentes, Alexandre et Hagemeister, Nicola.
2018.
« Comparison of soft tissue artifact and its effects on knee kinematics between non-obese and obese subjects performing a squatting activity recorded using an exoskeleton ».
Gait and Posture, vol. 61.
pp. 197-203.
Clément, Julien, Raison, Maxime et Rouleau, Dominique M..
2018.
« Reproducibility analysis of upper limbs reachable workspace, and effects of acquisition protocol, sex and hand dominancy ».
Journal of Biomechanics, vol. 68.
pp. 58-64.
Clement, Julien, Toliopoulos, Panagiota, Hagemeister, Nicola, Desmeules, François, Fuentes, Alexandre et Vendittoli, Pascal-André.
2018.
« Healthy 3D knee kinematics during gait: Differences between women and men, and correlation with x-ray alignment ».
Gait and Posture, vol. 64.
pp. 198-204.
Coallier, François.
2018.
« A system of systems engineering perspective on IoT trustworthiness ».
In 13th System of Systems Engineering Conference (SoSE 2018) (Paris, France, June 19-22, 2018)
pp. 89-91.
IEEE. Coallier, François. 2018. « Internal standardization in information technologies ». Communication lors de la conférence : 1st International Conference on Smart City and Communities (ICSCC 2018) (Ouagadougou, Burkina Faso, July 24-26, 2018).
Cole, Donald C., Parkes, Margot W., Saint-Charles, Johanne, Gislason, Maya, McKellar, Kaileah et Webb, Jena.
2018.
« Evolution of Capacity Strengthening : Insights from the Canadian Community of Practice in Ecosystem Approaches to Health ».
Transformative Dialogues: Teaching and Learning Journal, vol. 11, nº 2.
Colrain, M., Goldstone, A., Forouzanfar, M., Baker, F. C., Claudatos, S., Gil, M., Alschuler, V., Lim, Y. Q., Rosas, L., Prouty, D. et de Zambotti, M..
2018.
« Effect of evening alcohol intake on nocturnal cardiovascular function in normal adults ».
Alcoholism: Clinical and Experimental Research, vol. 42, nº suppl. 1.
Condo, Carlo, Giard, Pascal, Leduc-Primeau, Francois, Sarkis, Gabi et Gross, Warren J..
2018.
« A 9.52 dB NCG FEC scheme and 162 b/Cycle low-complexity product decoder architecture ».
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 65, nº 4.
pp. 1420-1431. Conti, Jessica, Ozell, Benoît, Paquette, Eric et Renaud, Patrice. 2018. « Adjusting stereoscopic parameters by evaluating the point of regard in a virtual environment ». Communication lors de la conférence : CHCCS Graphics Interface Conference (Toronto, ON, Canada, May 8-11, 2018).
Cordeiro, José Carlos Alves, da Silva, Silvana Mendes, da Silva, Adriano Maniçoba et de Paula Ferreira, William.
2018.
« Estratégias híbridas de produção em sistemas make to stock (MTS) emake to order (MTO) com otimização multiobjetivo ».
Produto & Produção, vol. 19, nº 2.
Cordier, Florian, Tassi, Pablo, Claude, Nicolas, Crosato, Alessandra, Rodrigues, Stéphane et Van Bang, Damien Pham.
2018.
« Influence of hydrology, sediment supply and sediment gradation on river bar morphodynamics: Application to the Loire River at Bréhémont (France) ».
In River Flow 2018 - Ninth International Conference on Fluvial Hydraulics (Lyon-Villeurbanne, France, Sept. 05-08, 2018)
Coll. « E3S Web of Conferences », vol. 40.
EDP Sciences.
Coria, I., Martin, I., Bouzid, A. H., Heras, I. et Abasolo, M..
2018.
« FEM superelement technique applied to oil and gas bolted flange connections ».
In 24th International Conference on Fluid Sealing, March 7, 2018 - March 8, 2018 (Manchester, United kingdom, March 7-8, 2018)
pp. 105-115.
United kingdom : BHR Group Limited.
Coria, Ibai, Martín, Iñigo Morales, Bouzid, Abel-Hakim, Heras, Iker et Abasolo, Mikel.
2018.
« Efficient assembly of bolted joints under external loads using numerical FEM ».
International Journal of Mechanical Sciences, vol. 142-143.
pp. 575-582.
Coria, Ibai, Martín, Iñigo, Bouzid, Hakim, Heras, Iker et Aguirrebeitia, Josu.
2018.
« Optimized bolt tightening sequences in bolted joints using superelement FE modeling technique ».
In 37th International Conference on Ocean, Offshore and Arctic Engineering (Madrid, Spain, June 17-22, 2018)
ASME.
Cormier, Laurent et Joncas, Simon.
2018.
« Modelling the effect of temperature on the probabilistic stress–life fatigue diagram of glass fibre–polymer composites loaded in tension along the fibre direction ».
Journal of Composite Materials, vol. 52, nº 2.
pp. 207-224.
Cormier, Laurent et Joncas, Simon.
2018.
« Modelling the storage modulus, transition temperatures and timetemperature superposition characteristics of epoxies and their composites ».
Journal of Thermal Analysis and Calorimetry, vol. 131, nº 3.
pp. 2589-2601. Cornille, V. et D’Avignon, K.. 2018. « L’hydrothermie : défis et avantages ». Affiche présentée lors de la conférence : Congrès annuel de l’AQME : l’efficacité énergétique à l’heure de la décarbonisation (Montréal, QC, Canada, 31 mai 2018).
Costanzo, Salvatore, Fajjari, Ilhem, Aitsaadi, Nadjib et Langar, Rami.
2018.
« A network slicing prototype for a flexible cloud radio access network ».
In 15th IEEE Annual Consumer Communications & Networking Conference (CCNC) (Las Vegas, NV, USA, Jan. 12-15, 2018)
IEEE.
Costanzo, Salvatore, Fajjari, Ilhem, Aitsaadi, Nadjib et Langar, Rami.
2018.
« DEMO: SDN-based network slicing in C-RAN ».
In 15th IEEE Annual Consumer Communications & Networking Conference (CCNC) (Las Vegas, NV, USA, Jan. 12-15, 2018)
IEEE.
Costanzo, Salvatore, Fajjari, Ilhem, Aitsaadi, Nadjib et Langar, Rami.
2018.
« Dynamic network slicing for 5G IoT and eMBB services: A new design with prototype and implementation results ».
In 3rd Cloudification of the Internet of Things (CIoT) (Paris, France, July 02-04, 2018)
IEEE.
Côté, N., Dubé, M., Dano, M-L et Potvin, M-J.
2018.
« Repair of thermoplastic composite structures using induction welding ».
In CASI-ASTRO Conference (Québec, QC, Canada, May 15-17, 2018)
Canadian Aeronautics and Space Institute. Côté, Pascal, Arsenault, Richard et Desreumaux, Quentin. 2018. « Mid-term hydro-scheduling problem: The battle between stochastic dynamic programming and reinforcement learning ». Communication lors de la conférence : SINTEF 6th International Workshop on Hydro Scheduling in Competitive Electricity Markets (Stavanger, Norway, Sept. 12-13, 2018).
Coti, Camille, Evangelista, Sami et Petrucci, Laure.
2018.
« One-sided communications for more efficient parallel state space exploration over RDMA clusters ».
In Euro-Par 2018 : Parallel Processing : 24th International Conference on Parallel and Distributed Computing (Turin, Italy, Aug. 27-31, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11014.
pp. 432-446.
Springer.
Coti, Camille, Evangelista, Sami et Petrucci, Laure.
2018.
« State compression based on one-sided communications for distributed model checking ».
In IEEE International Conference on Engineering of Complex Computer Systems, ICECCS (Melbourne, Australia, Dec. 12-14, 2018)
pp. 41-50.
Institute of Electrical and Electronics Engineers Inc..
Couderc, H., Griseri, V., David, E. et Mary, D..
2018.
« Dielectric properties of LDPE/MgO nanocomposites micro-extruded from a masterbatch ».
In 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Cancun, Mexico, Oct. 21-24, 2018)
pp. 175-178.
IEEE.
Couillard, Denis, Dahman, Ghassan, GrandMaison, Marie-Eve, Poitau, Gwenael et Gagnon, Francois.
2018.
« Robust broadband maritime communications: Theoretical and experimental validation ».
Radio Science, vol. 53, nº 6.
pp. 749-760.
Coulibaly, Idrissa, Spiric, Nicolas, Lepage, Richard et St-Jacques, Michele.
2018.
« Semiautomatic road extraction from vhr images based on multiscale and spectral angle in case of earthquake ».
IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 11, nº 1.
pp. 238-248.
Coulon, Pierre, Chatelain, Jean-François, Dubé, Martine et Rimpault, Xavier.
2018.
« Effect of curing pressure on machinability of carbon fiber composite ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 307-310.
Elsevier. Coutu, S., Nadeau, S. et Ateme-Nguema, B.. 2018. « Developing a design and implementation methodology of a lean and safe maintenance department ». Affiche numéro 280 présentée lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018). Crétot-Richert, Gabrielle, Viallet, Guilhem, Valentin, Olivier, Delnavaz, Aidin et Voix, Jérémie. 2018. « EARtrode : a custom-fitted in and around the ear platform for BCI applications ». Communication lors de la conférence : Lightning Talk-NeuroTechMTL Entrepreneurship Series: Applied Neuro Research (Montreal, QC, Canada, Oct. 18, 2018).
Cruz, Rafael M. O., Sabourin, Robert et Cavalcanti, George D. C..
2018.
« Dynamic classifier selection: Recent advances and perspectives ».
Information Fusion, vol. 41.
pp. 195-216.
Cruz, Rafael M. O., Sabourin, Robert et Cavalcanti, George D. C..
2018.
« Prototype selection for dynamic classifier and ensemble selection ».
Neural Computing and Applications, vol. 29, nº 2.
pp. 447-457. Cruz-Hernandez, Juan Manuel, Grant, Danny, Lévesque, Vincent et Modarres, Ali (inventeurs) 10 avril 2018. « System, method for a haptically-enabled deformable surface ». Immersion Corporation (titulaire(s)). Brevet américain US 9,939,900. Cruz-Hernandez, Juan Manuel, Saboune, Jamal, Hamam, Abdelwahab et Lévesque, Vincent (inventeurs) 25 septembre 2018. « Deformable haptic wearables with variable physical properties ». Immersion Corporation (titulaire(s)). Brevet américain US 10,082,872. Cunningham, M., Samson, C. et Laliberté, J.. 2018. « Design and testing of a novel rotary-wing aerial system for magnetic surveying ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Mar. 23-25, 2018).
Cunningham, Michael, Samson, Claire, Wood, Alan et Cook, Ian.
2018.
« Aeromagnetic surveying with a rotary-wing unmanned aircraft system: A case study from a zinc deposit in Nash Creek, New Brunswick, Canada ».
Pure and Applied Geophysics, vol. 175, nº 9.
pp. 3145-3158.
da Silva Veith, Alexandre, Dias de Assuncao, Marcos et Lefevre, Laurent.
2018.
« Latency-aware placement of data stream analytics on edge computing ».
In Service-Oriented Computing : 16th International Conference, ICSOC 2018, Hangzhou, China, November 12-15, 2018, Proceedings (Hangzhou, China, Nov. 12-15, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11236.
pp. 215-229.
Springer Verlag.
da Silva, Everaldo Francisco, Damasceno, Luis Fernando Ferreira, da Silva, Adriano Maniçoba et de Paula Ferreira, William.
2018.
« Impact of missing spare part on production efficiency: An analysis with the OEE indicator ».
Journal of Lean Systems, vol. 3, nº 3.
pp. 76-88.
da Silva, Tássia Farssura Lima et Melhado, Silvio Burratino.
2018.
« Gestão de riscos e riscos de gestão em projetos industriais: Estudos de caso ».
In
Complementaridade: Arquitetura, Engenharia e Construção.
pp. 111-123. Ponta Grossa : Atena Editora.
da Silveira Fleck, Alan, Couture, Caroline, Sauvé, Jean-François, Njanga, Pierre-Eric, Neesham-Grenon, Eve, Lachapelle, Guillaume, Coulombe, Hugo, Hallé, Stéphane, Aubin, Simon, Lavoué, Jérôme et Debia, Maximilien.
2018.
« Diesel engine exhaust exposure in underground mines: Comparison between different surrogates of particulate exposure ».
Journal of Occupational and Environmental Hygiene, vol. 15, nº 7.
pp. 549-558.
Dagenais, François, Guzman, Julián, Vervondel, Valentin, Hay, Alexander, Delorme, Sébastien, Mould, David et Paquette, Eric.
2018.
« Real-time virtual pipes simulation and modeling for small-scale shallow water ».
In Workshop on Virtual Reality Interaction and Physical Simulation (VRIPHYS) (Delft, Netherlands, Apr. 15-16, 2018)
pp. 45-54.
The Eurographics Association.
Dagenais, François, Vervondel, Valentin, Guzman, Julian E., Hay, Alexander, Delorme, Sébastien, Mould, David et Paquette, Eric.
2018.
« Extended virtual pipes for the stable and real-time simulation of small-scale shallow water ».
Computers and Graphics, vol. 76.
pp. 84-95.
Daher, Nivine Abou, Lattouf, Mary-jo, Mougharbel, Imad, Saad, Maarouf, Kanaan, Hadi Y., Raoofat, Mahdi, Asber, Dalal et Beltran-Galindo, Javier.
2018.
« Improved control method of HVAC system for Demand Response ».
In 2018 4th International Conference on Renewable Energies for Developing Countries (REDEC) (Beirut, Lebanon, Nov. 1-2, 2018)
IEEE.
Dahmen, Joseph, Kim, Juchan et Ouellet-Plamondon, Claudiane M..
2018.
« Life cycle assessment of emergent masonry blocks ».
Journal of Cleaner Production, vol. 171.
pp. 1622-1637.
Dammak, Houcine et Gardoni, Mickael.
2018.
« Improving the innovation process by harnessing the usage of content management tools coupled with visualization tools ».
In Product Lifecycle Management to Support Industry 4.0 : 15th IFIP WG 5.1 International Conference (PLM) (Turin, Italy, July 2-4, 2018)
Coll. « IFIP Advances in Information and Communication Technology », vol. 540.
pp. 642-655.
Springer International Publishing.
Dancila, B. D. et Botez, R. M..
2018.
« Vertical flight path segments sets for aircraft flight plan prediction and optimisation ».
Aeronautical Journal, vol. 122, nº 1255.
pp. 1371-1424.
Daneault, Véronique, Dumont, Marie, Massé, Éric, Forcier, Pierre, Boré, Arnaud, Lina, Jean-Marc, Doyon, Julien, Vandewalle, Gilles et Carrier, Julie.
2018.
« Plasticity in the sensitivity to light in aging: Decreased non-visual impact of light on cognitive brain activity in older individuals but no impact of lens replacement ».
Frontiers in Physiology, vol. 9.
Dang, D. D., Pham, X. T., Labbe, P., Torriano, F., Morissette, J. F. et Hudon, C..
2018.
« CFD analysis of turbulent convective heat transfer in a hydro-generator rotor-stator system ».
Applied Thermal Engineering, vol. 130.
pp. 17-28.
Daoust, Marc-Kevin.
2018.
« Sciences normatives, procédures neutres ».
Philosophia Scientiae, vol. 22.
pp. 37-57.
Darvishi, Mostafa, Audet, Yves et Blaquière, Yves.
2018.
« Delay monitor circuit and delay change measurement due to SEU in SRAM-based FPGA ».
IEEE Transactions on Nuclear Science, vol. 65, nº 5.
pp. 1153-1160. Darwish, A., Di Labbio, G., Saleh, W. et Kadem, L.. 2018. « Modal decomposition analysis of flow downstream of a dysfunctional mechanical aortic valve ». Communication lors de la conférence : 1st Canadian Aortic and Vascular Engineering Symposium (CAVES) (Montréal, QC, Canada, Sept. 27, 2018).
Darwish, Ahmed, Di Labbio, Giuseppe, Saleh, Wael et Kadem, Lyes.
2018.
« Modal decomposition and Lagrangian coherent structures analysis of flow past a dysfunctional mechanical aortic valve ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 63, nº 13.
p. 260.
Darwish, Ahmed, Saleh, Wael, Di Labbio, Giuseppe et Kadem, Lyes.
2018.
« In vitro investigation of the effect of a dysfunctional bileaflet mechanical aortic valve on flow characteristics in the ascending aorta ».
In Proceedings of The Canadian Society for Mechanical Engineering International Congress 2018 : Progress in Canadian Mechanical Engineering (Toronto, ON, Canada, May 27-30, 2018)
Canadian Society for Mechanical Engineering.
Das, S., Lecours Boucher, X., Rogers, C., Makowski, C., Chouinard-Decorte, F., Oros Klein, K., Beck, N., Rioux, P., Brown, S. T., Mohaddes, Z., Zweber, C., Foing, V., Forest, M., O’Donnell, K. J., Clark, J., Meaney, M. J., Greenwood, C. M. T. et Evans, A. C..
2018.
« Integration of “omics” data and phenotypic data within a unified extensible multimodal framework ».
Frontiers in Neuroinformatics, vol. 12.
Daviau-Desnoyers, D. et Hassan, M..
2018.
« Design and construction of Boychuk Interchange ».
In 10th International Conference on Short and Medium Span Bridges (Québec, QC, Canada, July 31-Aug. 03, 2018)
David, Eric et Andritsch, Thomas.
2018.
« Dielectric Properties of Epoxy/POSS and PE/POSS Systems ».
In
Polymer/POSS Nanocomposites and Hybrid Materials: Preparation, Properties, Applications.
Coll. « Springer Series on Polymer and Composite Materials ».
pp. 233-254. Springer. D’Avignon, Katherine. 2018. « Technologies de stockage thermique : amélioration du profil énergétique et de la résilience ». Communication lors de la conférence : Rendez-vous Multi Énergies de l'Association des gestionnaires de parcs immobiliers institutionnels (AGPI) (Montréal, QC, Canada, 12 avril 2018). D’Avignon, Katherine. 2018. « Technologies de stockage thermique : amélioration du profil énergétique et de la résilience ». Communication lors de la conférence : Rendez-vous Multi Énergies de l'Association des gestionnaires de parcs immobiliers institutionnels (AGPI) (Québec, QC, Canada, 18 avril 2018).
D'Avignon, Katherine et Kummert, Michaël.
2018.
« Modeling horizontal storage tanks with encapsulated phase change materials for building performance simulation ».
Science and Technology for the Built Environment, vol. 24, nº 4.
pp. 327-342.
Dawa, Mohamed, Kaddoum, Georges et Sattar, Zeeshan.
2018.
« A generalized lower bound on the Bit-Error-Rate of DCSK Systems over multi-path rayleigh fading channels ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 65, nº 3.
pp. 321-325. de Guise, Jacques, Labelle, Hubert, Mac-Thiong, Jean-Marc, Nault, Marie-Lyne et Parent, Stefan (inventeurs) 28 août 2018. « System and method for predicting scoliosis progression ». Ecole de technologie supérieure, Valorisation HSJ (limited partnership) (titulaire(s)). Brevet canadien CA 2927955. [Titre traduit: Système et procédé de prédiction de la progression de la scoliose].
De L’Étoile-Morel, Samuel, Cheng, Matthew P., Cheng, Alexander P., McDonald, Emily G. et Lee, Todd C..
2018.
« Piperacillin-tazobactam use in esbl escherichia coli bacteremia: Should reporting be revised? ».
Journal of the Association of Medical Microbiology and Infectious Disease Canada, vol. 3, nº 1.
pp. 24-29.
de Paula, Nathalia et Melhado, Silvio.
2018.
« Sustainability in management processes: case studies in architectural design firms ».
Journal of Architectural Engineering, vol. 24, nº 4.
Dehghan, Ehsan, Nikabadi, Mohsen Shafiei, Amiri, Maghsoud et Jabbarzadeh, Armin.
2018.
« Hybrid robust, stochastic and possibilistic programming for closed-loop supply chain network design ».
Computers and Industrial Engineering, vol. 123.
pp. 220-231.
Dehghani, Ehsan, Jabalameli, Mohammad Saeed et Jabbarzadeh, Armin.
2018.
« Robust design and optimization of solar photovoltaic supply chain in an uncertain environment ».
Energy, vol. 142.
pp. 139-156.
Dehghani, Ehsan, Jabalameli, Mohammad Saeed, Jabbarzadeh, Armin et Pishvaee, Mir Saman.
2018.
« Resilient solar photovoltaic supply chain network design under business-as-usual and hazard uncertainties ».
Computers and Chemical Engineering, vol. 111.
pp. 288-310.
Dehghanzadeh, Ahmad, Farahani, Gholamreza, Vahedi, Hani et Al-Haddad, Kamal.
2018.
« Model predictive control design for DC-DC converters applied to a photovoltaic system ».
International Journal of Electrical Power and Energy Systems, vol. 103.
pp. 537-544.
Demers, V., Fareh, F., Turenne, S., Demarquette, N. R. et Scalzo, O..
2018.
« Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding ».
Advanced Powder Technology, vol. 29, nº 1.
pp. 180-190.
Derbel, Oussama, Cherif, Mohamed Lajmi et Landry, René Jr..
2018.
« Driver behavior assessment based on loosely coupled GPS/INS integration in harsh environment ».
In IEEE/ION Position, Location and Navigation Symposium (PLANS 2018) (Monterey, CA, USA, Apr. 23-28, 2018)
pp. 1362-1367.
IEEE.
Derbel, Oussama et Landry Jr., René.
2018.
« Belief and fuzzy theories for driving behavior assessment in case of accident scenarios ».
International Journal of Automotive Technology, vol. 19, nº 1.
pp. 167-177.
Dermanaki Farahani, Rouhollah et Dubé, Martine.
2018.
« Printing polymer nanocomposites and composites in three dimensions ».
Advanced Engineering Materials, vol. 20, nº 2.
Desbois, Adrien, Matei, Svetlana, Beguet, Florian, Perreault, Isabelle, Gervais, Sylvie et de Guise, Jacques.
2018.
« The importance of a three-dimensional-based approach with personalized models for accurately assessing TBSA ».
Journal of Burn Care and Research, vol. 39, nº 2.
pp. 235-244.
Descent, Philippe et Izquierdo, Ricardo.
2018.
« Thermal transfer printing with donor ribbon for flexible hybrid RFID antenna fabrication ».
In 2018 International Flexible Electronics Technology Conference (IFETC) (Ottawa, ON, Canada, Aug. 07-09, 2018)
Piscataway, NJ, USA : IEEE.
Descent, Philippe, Izquierdo, Ricardo et Fayomi, Christian.
2018.
« Printing of temperature and humidity sensors on flexible substrates for biomedical applications ».
In 2018 IEEE International Symposium on Circuits and Systems (ISCAS) (Florence, Italy, May 27-30, 2018)
IEEE.
Desjardins, Martine, Lefebvre, Christine, De Beaumont, Louis, Lina, Jean-Marc et Jolicoeur, Pierre.
2018.
« Visual event-related magnetic field reveal possible sensory and attentional deficits in older adults following mild traumatic brain injury ».
[Article de conférence]. Psychophysiology, vol. 55, nº Suppl. 1.
S86.
Dhaouadi, Tahar, Ngo, Anh Dung, Rodriguez-Uribe, Arturo, Misra, Manjusri et Mohanty, Amar K..
2018.
« Mechanical characterisation and modelling of sustainable biomaterials randomly reinforced toughened polypropylene ».
In 15th International Symposium on Bioplastics, Biocomposites and Biorefining (ISBBB 2018) (Guelph, ON, Canada, July 24-27, 2018)
Dhwaj, Kirti, Hadi, Richard, Yang, Tao, Jiang, Li Jun, Kovitz, Joshu et Itoh, Tatsuo.
2018.
« Planar resonator embedded substrate integrated waveguide (SIW) cavity filter ».
In 48th European Microwave Conference (EuMC) (Madrid, Spain, Sept. 23-27, 2018)
pp. 761-764.
Institute of Electrical and Electronics Engineers Inc..
Dhwaj, Kirti, Zhao, Yan, Al Hadi, Richard, Li, Xiaoqiang, Chang, Frank M. C. et Itoh, Tatsuo.
2018.
« A 0.55 THz on-chip substrate integrated waveguide antenna ».
In International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz) (Nagoya, Japan, Sept. 09-14, 2018)
IEEE Computer Society.
Di Labbio, Giuseppe et Kadem, Lyes.
2018.
« Jet collisions and vortex reversal in the human left ventricle ».
Journal of Biomechanics, vol. 78.
pp. 155-160. Di Labbio, Giuseppe, Vétel, Jérôme et Kadem, Lyes. 2018. « Hearts on fire ». Affiche numéro P0006 présentée lors de la conférence : 71th Annual Meeting of the APS Division of Fluid Dynamics (Atlanta, GA, USA, Nov. 18-20, 2018).
Di Labbio, Giuseppe, Vétel, Jérôme et Kadem, Lyes.
2018.
« Material transport in the left ventricle with aortic valve regurgitation ».
Physical Review Fluids, vol. 3, nº 11.
Di Maria, Andrea, Levasseur, Annie et Van Acker, Karel.
2018.
« Dynamic vs static approaches in LCA to assess the long term global warming effects of novel waste-based construction materials ».
In EcoBalance 2018 : The 13th Biennial International Conference on EcoBalance (Tokyo, Japan, Oct. 09-12, 2018)
Dias de Assuncao, Marcos, da Silva Veith, Alexandre et Buyya, Rajkumar.
2018.
« Distributed data stream processing and edge computing: A survey on resource elasticity and future directions ».
Journal of Network and Computer Applications, vol. 103.
pp. 1-17.
Dias de Assunção, Marcos et Lefèvre, Laurent.
2018.
« Bare-metal reservation for cloud: an analysis of the trade off between reactivity and energy efficiency ».
Cluster Computing, vol. 21, nº 2.
pp. 1289-1300.
Diotalevi, Lucien, Petit, Yvan, Brailovski, Vladimir, Nichols, Sylvain, Marchionatti, Emma et Wagnac, Éric.
2018.
« Quasi-static tensile properties of the Cranial Cruciate Ligament (CrCL) in adult cattle: towards the design of a prosthetic CrCL ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 79.
pp. 239-245. Dixneuf, Paul, Glaus, Mathias et Errico, Fausto. 2018. « A computational study on imputation methods for environmental applications ». Communication lors de la conférence : 2018 Optimization Days = Journées de l'Optimisation 2018 (Montreal, QC, Canada, May 07-09, 2018).
Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2018.
« Performance of a capillary dilution system for high concentration sampling of ultrafine aerosols ».
Aerosol Science and Engineering, vol. 2, nº 2.
92–97.
Dkhil, Abdellatif, Gardoni, Mickael, Belgacem, Lamine et Houssin, Remy.
2018.
« Linkographic analysis of design ideation session: Idea graph representation and additional tools for analysis ».
In Product Lifecycle Management to Support Industry 4.0 : 15th IFIP WG 5.1 International Conference (PLM) (Turin, Italy, July 2-4, 2018)
Coll. « IFIP Advances in Information and Communication Technology », vol. 540.
pp. 715-725.
Springer International Publishing.
Doghri, Mouna, Duchesne, Sophie, Poulin, Annie et Ouellet, Maxim.
2018.
« Comparative study of pressure reduction valve controllers in water distribution systems ».
In Recent Advances in Environmental Science from the Euro-Mediterranean and Surrounding Regions : Proceedings of Euro-Mediterranean Conference for Environmental Integration (EMCEI-1) (Sousse, Tunisia, Nov. 22-25, 2017)
Coll. « Advances in Science Technology & Innovation »
pp. 1001-1003.
Cham : Springer International Publishing Ag.
Doghri, Mouna, Duchesne, Sophie, Poulin, Annie et Ouellet, Maxim.
2018.
« Impacts of the integration of water demand prediction in real time control of water distribution systems ».
In 1st International WDSA / CCWI 2018 Joint Conference (Kingston, ON, Canada, July 23-25, 2018)
Coll. « WDSA / CCWI Joint Conference Proceedings », vol. 1.
Dolz, Jose, Ben Ayed, Ismail, Jing, Yuan et Desrosiers, Christian.
2018.
« Isointense infant brain segmentation with a hyper-dense connected convolutional neural network ».
In IEEE 15th International Symposium on Biomedical Imaging (ISBI 2018) (Washington, DC, USA, Apr. 04-07, 2018)
pp. 616-620.
Piscataway, NJ, USA : IEEE.
Dolz, Jose, Desrosiers, Christian et Ben Ayed, Ismail.
2018.
« 3D fully convolutional networks for subcortical segmentation in MRI: A large-scale study ».
NeuroImage, vol. 170.
pp. 456-470.
Dolz, Jose, Xu, Xiaopan, Rony, Jérôme, Yuan, Jing, Liu, Yang, Granger, Éric, Desrosiers, Christian, Zhang, Xi, Ben Ayed, Ismail et Lu, Hongbing.
2018.
« Multiregion segmentation of bladder cancer structures in MRI with progressive dilated convolutional networks ».
Medical Physics, vol. 45, nº 12.
pp. 5482-5493.
Doran, Pascal, Vlasic, Ed, Guevremont, Grant et Moustapha, Hany.
2018.
« Gas-path optimization using turbine aerodynamics meanline and design exploration ».
In Proceedings of GPPS Society Forum 18 (Montréal, QC, Canada, May 07-09, 2018)
Global Power and Propulsion Society. Dorsemaine, M., Petit, Y., Ménard, A.-L., Bailly, N. et Wagnac, E.. 2018. « Effet de la dégénérescence du disque sur les fractures vertébrales ». Communication lors de la conférence : 38ème journée de la recherche du POES et de la division d’orthopédie de l’Université de Montréal (Montreal, QC, Canada, 4 mai, 2018).
Doub, F., Yeferni, K., Rahmani, S. et Al-Haddad, K..
2018.
« Experimental evaluation of a zero-voltage-switched quasi-resonant buck converter ».
In 15th International Multi-Conference on Systems, Signals & Devices (SSD) (Hammamet, Tunisia, Mar. 19-22, 2018)
pp. 326-331.
Piscataway, NJ, USA : IEEE.
Douglas, Alleman, Jobidon, Gabriel, Molenaar, Keith R. et Caplicki, Edmund V..
2018.
« Achieving agency goals in public-private partnerships through key performance indicators: Application of existing contract and specification theory ».
In Construction Research Congress : Construction Project Management (New Orleans, LA, USA, Apr. 02-04, 2018)
pp. 53-63.
American Society of Civil Engineers (ASCE). Doutres, Olivier, Sgard, Franck C., Benacchio, Simon, Terroir, Jonathan, Perrin, Nellie, Trompette, Nicolas, Negrini, Alessia, Gaudreau, Marc-André, Jolly, Caroline, Berry, Alain, Gauthier, Phillippe-Aubert, Padois, Thomas et Gauvin, Chantal. 2018. « Earplug comfort: From subjective assessment on the field to objective measurement and simulation using augmented artificial heads ». Communication lors de la conférence : 175th Meeting of the Acoustical Society of America (Minneapolis, MN, USA, May 7-11, 2018). Douzi, W., Dugué, B., Vinches, L., Al Sayed, C., Hallé, S., Bosquet, L. et Dupuy, O.. 2018. « Cooling during exercise enhances aerobic and anaerobic exercise performances: Which body area should we cool? A systematic review with meta-analyses ». Communication lors de la conférence : 23rd Annual Congress of the European College of Sport Science (Dublin, Ireland, July 4-7, 2018).
Dridi, Lobna et Zhani, Mohamed Faten.
2018.
« A holistic approach to mitigating DoS attacks in SDN networks ».
[Article de conférence]. International Journal of Network Management, vol. 28, nº 1.
Drouin, Simon. 2018. « Towards interaction-driven enhancement of augmented reality visualization in image-guided neurosurgery ». Thèse de doctorat. Montreal, McGill University
Drouin, Simon, Collins, D. L. et Kersten-Oertel, M..
2018.
« Interaction in augmented reality image-guided surgery ».
In
Mixed and Augmented Reality in Medicine.
pp. 99-114. CRC Press.
Drouin, Simon et Collins, D. Louis.
2018.
« PRISM: an open source framework for the interactive design of GPU volume rendering shaders ».
PLoS ONE, vol. 13, nº 3.
Du, Phuong Hanh, Nguyen, Hai Chau, Nguyen, Kim Khoa et Nguyen, Ngoc Hoa.
2018.
« An efficient parallel algorithm for computing the closeness centrality in social networks ».
In Proceedings of the Ninth International Symposium on Information and Communication Technology (Danang City, Viet Nam, Dec. 6-7, 2018)
pp. 456-462.
ACM.
Dubuisson, F., Rezkallah, M., Chandra, A., Saad, M. et Tremblay, M..
2018.
« Implementation of a new control for hybrid wind-diesel for water treatment standalone system ».
In 2018 IEEE Industry Applications Society Annual Meeting (IAS) (Portland, OR, USA, Sept. 23-27, 2018)
IEEE.
Dubuisson, F., Rezkallah, M., Chandra, A. et Tremblay, M..
2018.
« Control of a new standalone microgrid configuration ».
In 2018 IEEE 31st Canadian Conference on Electrical & Computer Engineering (CCECE) (Québec, QC, Canada, May 13-16, 2018)
Piscataway, NJ, USA : IEEE.
Duclos, N. C., Parent, G., Aissaoui, R., Duclos, C. et Nadeau, S..
2018.
« Using inertial signals to characterize main lower limb gait patterns in individuals post-stroke ».
Annals of Physical and Rehabilitation Medicine, vol. 61, nº suppl..
e445.
Dumberry, Kevin, Duhaime, François et Éthier, Yannic.
2018.
« Erosion monitoring during core overtopping using a laboratory model with digital image correlation and X-ray microcomputed tomography ».
Canadian Geotechnical Journal = Revue Canadienne de Géotechnique, vol. 55, nº 2.
pp. 234-245.
Dumoulin, Romain, Tordini, Francesco, Voix, Jeremie et Cossette, Isabelle.
2018.
« A hearing-care toolkit for young musicians: Combined use of a noise dose measurement app and acoustical manekin ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 144, nº 3.
p. 1929.
Dupin, Aurélien, Robert, Jean-Marc et Bidan, Christophe.
2018.
« Location-proof system based on secure multi-party computations ».
In Provable Security : 12th International Conference, ProvSec 2018 (Jeju Island, Korea, Oct. 25-28, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11192.
pp. 22-39.
Cham, Switzerland : Springer International Publishing. Dupont, T., Leclaire, P., Brooke, D., Umnova, O. et Panneton, R.. 2018. « Étude du comportement acoustique de matériaux structurés perforés sous forts niveaux d’excitation acoustique ». Communication lors de la conférence : 14ème Congrès Français d'Acoustique (Le Havre, France, 23-27 avril 2018).
Dupont, T., Leclaire, P., Umnova, O. et Panneton, R..
2018.
« Perforated materials with periodically distributed annular cavities for low frequency acoustic absorption ».
In 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering (Chicago, IL, USA, Aug. 26-29, 2018)
Institute of Noise Control Engineering.
Dupont, Thomas, Leclaire, Philippe, Panneton, Raymond et Umnova, Olga.
2018.
« A microstructure material design for low frequency sound absorption ».
Applied Acoustics, vol. 136.
pp. 86-93.
Dupont-Marillia, Frederic, Jahazi, Mohammad et Bélanger, Pierre.
2018.
« Phased array inspection of large size forged steel parts ».
In 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017)
Coll. « AIP Conference Proceedings », vol. 1949.
American Institute of Physics.
Dupraz, Elsa, Leduc-Primeau, François et Gagnon, François.
2018.
« Low-latency LDPC decoding achieved by code and architecture co-design ».
In 2018 IEEE 10th International Symposium on Turbo Codes & Iterative Information Processing (ISTC) (Hong Kong, China, Dec. 3-7, 2018)
Piscataway, NJ, USA : IEEE.
Eesaee, Mostafa, David, Eric, Demarquette, Nicole R. et Fabiani, Davide.
2018.
« Electrical breakdown properties of clay-based LDPE blends and nanocomposites ».
Journal of Nanomaterials, vol. 2018.
Ekstrøm, K. E., Dalaker, H., Wallin, M., Moosavi-Khoonsari, E. et Tranell, G..
2018.
« Extraction of nickel from iron sludge ».
In Infacon XV: International Ferro-Alloys Congress (Cape Town, South Africa, Feb. 25-28, 2018)
Southern African Institute of Mining and Metallurgy.
El Astrash, Khlifa et Assaf, Gabriel.
2018.
« Optimizing pavement construction procedures in the southern desert of libya ».
In ICSPET 2018 : 20th International Conference on Sustainable Pavement Engineering and Technology (Istanbul, Turkey, Feb. 15-16, 2018)
El Bedoui, Sarra, Duhaime, François et Dubé, Jean-Sébastien.
2018.
« Impact of carbonation on chemical and mineralogical properties of stabilized and solidified matrices ».
In GeoEdmonton 2018 – 71st Canadian Geotechnical Conference and the 13th Joint CGS/IAH-CNC Groundwater Conference (Edmonton, AB, Canada, Sept. 23-26, 2018)
El-Bayeh, Claude Ziad, Mougharbel, Imad, Asber, Dalal, Saad, Maarouf, Chandra, Ambrish et Lefebvre, Serge.
2018.
« Novel approach for optimizing the transformer’s critical power limit ».
IEEE Access, vol. 6.
pp. 55870-55882.
El-Bayeh, Claude Ziad, Mougharbel, Imad, Saad, Maarouf, Chandra, Ambrish, Asber, Dalal, Lenoir, Laurent et Lefebvre, Serge.
2018.
« Novel Soft-Constrained Distributed Strategy to meet high penetration trend of PEVs at homes ».
Energy and Buildings, vol. 178.
pp. 331-346.
El-Bayeh, Claude Ziad, Mougharbel, Imad, Saad, Marouf, Chandra, Ambrish, Asber, Dalal et Lefebvre, Serge.
2018.
« Impact of considering variable battery power profile of electric vehicles on the distribution network ».
In 2018 4th International Conference on Renewable Energies for Developing Countries (REDEC) (Beirut, Lebanon, Nov. 1-2, 2018)
IEEE.
El-Bayeh, Claude Ziad, Mougharbel, Imad, Saad, Marouf, Chandra, Ambrish, Lefebvre, Serge et Asber, Dalal.
2018.
« Novel multilevel soft constraints at homes for improving the integration of plug-in electric vehicles ».
In 2018 4th International Conference on Renewable Energies for Developing Countries (REDEC) (Beirut, Lebanon, Nov. 1-2, 2018)
IEEE. El-Gamal, Mourad, Cicek, Paul-Vahe et Nabki, Frédéric (inventeurs) 23 octobre 2018. « Methods and systems for humidity and pressure sensor overlay integration with electronics ». MEMS-Vision International Inc. (titulaire(s)). Brevet américain US 10,107,773 B2.
Elgamoudi, A., Akl Mahmoud, A. et Landry, R. Jr..
2018.
« The effect of altitude change on RFI geolocation accuracy using a hybrid TDOA/FDOA technique ».
In 18th Conférence en Astronomique = 18th Astronautics Conference (ASTRO 18) (Québec, QC, Canada, 15-17 mai 2018)
El-Khoury, Catherine Nasr, Kanaan, Hadi Y., Mougharbel, Imad et Al-Haddad, Kamal.
2018.
« Implementation of a series Z-source very sparse matrix converter in a PMSG-based WECS ».
In 19th IEEE International Conference on Industrial Technology (ICIT 2018) (Lyon, France, Feb. 20-22, 2018)
pp. 1887-1892.
IEEE.
El-Khoury, Catherine Nasr, Kanaan, Hadi Y., Mougharbel, Imad et Al-Haddad, Kamal.
2018.
« Optimized modulation technique for series Z-Source very sparse matrix converter ».
In IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG) (Doha, Qatar, Apr. 10-12, 2018)
Piscataway, NJ, USA : IEEE. Elliott, B., Ross, M., Kelley, S., Cummings, D., Winterburn, P., Ward, B., Milkereit, B., Ugalde, H., Samson, C., Mirza, A. et Normandeau, P.. 2018. « Revitalizing diamond exploration in the Slave Geological Province: a case study in the Northwest Territories, Canada ». Communication lors de la conférence : Resources for future generations conference (Vancouver, BC, Canada, June 16-21, 2018).
Elmurngi, Elshrif Ibrahim et Gherbi, Abdelouahed.
2018.
« Unfair reviews detection on Amazon reviews using sentiment analysis with supervised learning techniques ».
Journal of Computer Science, vol. 14, nº 5.
pp. 714-726.
Elrotub, Mousa et Gherbi, Abdelouahed.
2018.
« Virtual machine classification-based approach to enhanced workload balancing for cloud computing applications ».
In 9th International Conference on Ambient Systems, Networks and Technologies (ANT 2018) / The 8th International Conference on Sustainable Energy Information Technology (SEIT-2018) (Porto, Portugal, May 08-11, 2018)
Coll. « Procedia Computer Science », vol. 130.
pp. 683-688.
Elsevier.
El-Saikaly, Georges, Chaallal, Omar et Benmokrane, Brahim.
2018.
« Fatigue assessment of shear-strengthened RC T-Beams with externally bonded CFRP closed stirrups ».
Journal of Composites for Construction, vol. 22, nº 6.
Emami, Mahdi, Rahmani, Mohammad H. et Deslandes, Dominic.
2018.
« A LTCC ultra-wideband periodic leaky-wave antenna with wide scanning range at 60 GHz ».
In 2018 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC) (Cartagena des Indias, Colombia, Sept. 10-14, 2018)
pp. 916-919.
Piscataway, NJ, USA : IEEE.
Endo, Leticia M. A., de Paula Ferreira, William, da Silva, Adriano Maniçoba et Tanaka, Wilson Yoshio.
2018.
« Value stream mapping applied to a cake company ».
Journal of Lean Systems, vol. 3, nº 3.
pp. 64-75.
Enzenhöfer, Andreas, Andrews, Sheldon, Teichmann, Marek et Kövecses, Jösef.
2018.
« Comparison of mixed linear complementarity problem solvers for multibody simulations with contact ».
In 14th Workshop on Virtual Reality Interaction and Physical Simulation VRIPHYS (2018) (Delft, Netherlands, Apr. 15-16, 2018)
Enzenhöfer, Andreas, Andrews, Sheldon, Teichmann, Marek et Kövecses, Jösef. 2018. « Comparison of mixed linear complementarity problem solvers for multibody simulations with contact ». Communication lors de la conférence : 14th Workshop on Virtual Reality Interaction and Physical Simulation VRIPHYS (2018) (Delft, Netherlands, Apr. 15-16, 2018).
Ernez, Sami et Morency, François.
2018.
« CFD study of heat transfer and ice thickness in aircraft ground deicing by ADF jets ».
In 26th Annual Conference of the Computational Fluid Dynamics Society of Canada (CFD2018) (Winnipeg, MB, Canada, June 10-12, 2018)
Ernst, R.E., Samson, C., Bethell, E., Lee, J., Khawja, S., Graff, J. et Davey, S.. 2018. « Recent progress towards a global dyke swarm map of Venus ». Communication lors de la conférence : 18th Biennial Astronautics Conference of the Canadian Aeronautics and Space Institute (CASI) (Quebec City, QC, Canada, May 15-17, 2018).
Errico, F., Desaulniers, G., Gendreau, M., Rei, W. et Rousseau, L. M..
2018.
« The vehicle routing problem with hard time windows and stochastic service times ».
EURO Journal on Transportation and Logistics, vol. 7, nº 3.
pp. 223-251.
Errico, Fausto, Desaulniers, Guy, Lodi, Andrea et Rostam, Borzou.
2018.
« Exact and approximate solution methods for the vehicle routingproblem with stochastic and correlated travel times ».
In Seventh International Workshop on Freight Transportation and Logistics (ODYSSEUS) (Cagliari, Sardinia, Italy, June 03-08, 2018)
384–387.
Università degli Studi di Cagliari.
Errico, Fausto, Ichchou, Mohamed, De Rosa, Sergio, Bareille, Olivier et Franco, Francesco.
2018.
« A wave finite element technique for the calculation of the flow-induced vibrations of periodic and axial-symmetric structures ».
In INTER-NOISE and NOISE-CON Congress and Conference Proceedings, NOVEM 2018 (Ibiza, Spain, May 7-9, 2018)
pp. 62-73.
Institute of Noise Control Engineering.
Escandon-Quintanilla, Ma-Lorena, Gardoni, Mickael et Cohendet, Patrick.
2018.
« Improving concept development with data exploration in the context of an innovation and technological design course ».
International Journal on Interactive Design and Manufacturing, vol. 12, nº 1.
pp. 161-172.
Eshteiwi, Khaled, Ben Fredj, Kais, Kaddoum, Georges et Gagnon, François.
2018.
« Performance analysis of peer-to-peer V2V wireless communications in the presence of interference ».
In IEEE 28th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 8-13, 2017)
IEEE.
Esmaeili Salehani, Yaser, Arabnejad, Ehsan et Cheriet, Mohamed.
2018.
« Graph and sparse-based robust nonnegative block value decomposition for clustering ».
IEEE Journal on Selected Topics in Signal Processing, vol. 12, nº 6.
pp. 1561-1574.
Essaadali, R., Jarndal, A., Kouki, A. B. et Ghannouchi, F. M..
2018.
« On the accurate voltage and current analytical relationship to X-Parameters of a nonlinear two-port network ».
IEEE Transactions on Microwave Theory and Techniques, vol. 66, nº 10.
pp. 4439-4451.
Essaadali, Riadh, Jarndal, Anwar, Kouki, Ammar B. et Ghannouchi, Fadhel M..
2018.
« Conversion rules between X-Parameters and linearized two-port network parameters for large-signal operating conditions ».
IEEE Transactions on Microwave Theory and Techniques, vol. 66, nº 11.
pp. 4745-4756. Facchinello, Y., Wagnac, E., Ung, B., Petit, Y., Pradhan, P., Peyrache, L.-M. et Mac-Thiong, J.-M.. 2018. « The use of embedded optical fibers to assess the transient compression distribution at key locations of an instrumented spinal cord surrogate ». Communication lors de la conférence : ASIA 2018 44th Annual Scientific Meeting (Rochester, MN, USA, May 02-04, 2018).
Facchinello, Yann et Ung, Bora.
21 mars 2018.
« Des capteurs optiques pour l’étude de la moelle épinière ».
[Article de recherche]. Substance ÉTS.
Fahimnia, Behnam, Jabbarzadeh, Armin et Sarkis, Joseph.
2018.
« Greening versus resilience: A supply chain design perspective ».
Transportation Research Part E: Logistics and Transportation Review, vol. 119.
pp. 129-148.
Falardeau, Timothe et Bélanger, Pierre.
2018.
« Material characterization using ultrasound tomography ».
In 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017)
Coll. « AIP Conference Proceedings », vol. 1949.
American Institute of Physics.
Falardeau, Timothe et Belanger, Pierre.
2018.
« Ultrasound tomography in bone mimicking phantoms: Simulations and experiments ».
Journal of the Acoustical Society of America, vol. 144, nº 5.
pp. 2937-2946.
Fallaha, Charles et Saad, Maarouf.
2018.
« Model-based sliding functions design for sliding mode robot control ».
International Journal of Modelling, Identification and Control, vol. 30, nº 1.
pp. 48-60.
Fang, Xiaoxing, Wang, Yingxun et Landry, René Jr..
2018.
« Onboard trajectory generation for gyroplane unpowered landing based on optimal lift-to-drag ratio target ».
Aerospace Science and Technology, vol. 82-83.
pp. 438-449.
Faqihi, Hachmia, Saad, Maarouf, Benjelloun, Khalid, Benbrahim, Mohammed et Kabbaj, Mohammed Nabil.
2018.
« Sliding mode control in mobile platform joint space for multi-body cable driven robot ».
In ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics (Porto, Portugal, July 29-31, 2018)
pp. 357-363.
SciTePress.
Farahani, R. D., Therriault, D., Dubé, M., Bodkhe, S. et Mahdavi, M..
2018.
« Additive manufacturing of multifunctional nanocomposites and composites ».
In
Comprehensive Composite Materials II.
2nd ed.
pp. 380-407. Elsevier.
Farzam, Azarm, Nollet, Marie-José et Khaled, Amar.
2018.
« Integration of seismically induced site effects to the evaluation of the seismic vulnerability of bridges through a GIS platform ».
In 6th International Disaster Mitigation Specialty Conference (Fredericton, NB, Canada, June 13-16, 2018)
pp. 199-208.
Canadian Society for Civil Engineering.
Farzam, Azarm, Nollet, Marie-José et Khaled, Amar.
2018.
« Susceptibility modelling of seismically induced effects (landslides and rock falls) integrated to rapid scoring procedures for bridges using GIS tools for the Lowlands of the Saint-Lawrence Valley ».
Geomatics, Natural Hazards and Risk, vol. 9, nº 1.
pp. 589-607.
Farzaneh Kaloorazi, Mohammad Hadi, Bonev, Ilian A. et Birglen, Lionel.
2018.
« Simultaneous path placement and trajectory planning optimization for a redundant coordinated robotic workcell ».
Mechanism and Machine Theory, vol. 130.
pp. 346-362.
Farzaneh, Aida, Carriere, Jean, Forgues, Daniel et Monfet, Danielle.
2018.
« Framework for using building information modeling to create a building energy model ».
Journal of Architectural Engineering, vol. 24, nº 2.
FarzanehKaloorazi, Mohammad H. et Bonev, Ilian A..
2018.
« Singularities of the typical collaborative robot arm ».
In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Quebec, QC, Canada, Aug. 26-29, 2018)
ASME.
FarzanehKaloorazi, Mohammad H., Bonev, Ilian A. et Birglen, Lionel.
2018.
« Parameters identification of the path placement optimization problem for a redundant coordinated robotic workcell ».
In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Quebec, QC, Canada, Aug. 26-29, 2018)
ASME. Ferrari, G., Balasubramanian, P., Amabili, M., Breslavsky, I. et Tubaldi, E.. 2018. « Experimental characterization of the direction and time-dependent characteristics for the layers constituting the tissue of descending thoracic human aortas ». Communication lors de la conférence : 21st International Conference on Composite Structures (Bologna, Italy, Sept. 04-07, 2018).
Ferrari, Giovanni, Balasubramanian, Prabakaran, Le Guisquet, Stanislas, Piccagli, Lorenzo, Karazis, Kostas, Painter, Brian et Amabili, Marco.
2018.
« Non-linear vibrations of nuclear fuel rods ».
Nuclear Engineering and Design, vol. 338.
pp. 269-283.
Fethalla, Nuradeen, Saad, Maarouf, Michalska, Hannah et Ghommam, Jawhar.
2018.
« Robust observer-based dynamic sliding mode controller for a quadrotor UAV ».
IEEE Access, vol. 6.
pp. 45846-45859.
Filion, Alexandre, Joubair, Ahmed, Tahan, Antoine S. et Bonev, Ilian A..
2018.
« Robot calibration using a portable photogrammetry system ».
Robotics and Computer-Integrated Manufacturing, vol. 49.
pp. 1339-1351.
Finck, Christian, Beagon, Paul, Claus, John, Pean, Thibault, Vogler-Finck, Pierre, Zhang, Kun et Kazmi, Hussain Syed.
2018.
« Review of applied and tested control possibilities for energy flexibility in buildings ».
Coll. « Energy in Buildings and Communities Programme Annex 67 ».
International Energy Agency. 61 p.
Fischer, Stefan, Linsbauer, Lukas, Egyed, Alexander et Lopez-Herrejon, Robert Erick.
2018.
« Predicting higher order structural feature interactions in variable systems ».
In IEEE International Conference on Software Maintenance and Evolution (ICSME) (Madrid, Spain, Sept. 23-29, 2018)
pp. 252-263.
Los Alamitos, CA, USA : IEEE Computer Society.
Fischer, Stefan, Lopez-Herrejon, Robert Erick et Egyed, Alexander.
2018.
« Towards a fault-detection benchmark for evaluating software product line testing approaches ».
In 33rd Annual ACM Symposium on Applied Computing (SAC 2018) (Pau, France, Apr. 09-13, 2018)
pp. 2034-2041.
ACM.
Forest, M., O'Donnell, K. J., Voisin, G., Gaudreau, H., MacIsaac, J. L., McEwen, L. M., Silveira, P. P., Steiner, M., Kobor, M. S., Meaney, M. J. et Greenwood, C. M. T..
2018.
« Agreement in DNA methylation levels from the Illumina 450K array across batches, tissues, and time ».
Epigenetics, vol. 13, nº 1.
pp. 19-32.
Forgues, Daniel, Boton, Conrad et Hittier, Clément.
2018.
« Guide de coordination 3D basée sur des maquettes BIM ».
Centre d'études et de recherches pour l'avancement de la construction au Québec (CERACQ). 101 p.
Forgues, Daniel, Brunet, Maude et Chbaly, Hafsa.
2018.
« Lean-led, evidence-based and integrated design: Toward a collaborative briefing process ».
In Cooperative Design, Visualization, and Engineering : 15th International Conference, CDVE 2018 (Hangzhou, China, Oct. 21-24, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11151.
pp. 78-85.
Springer.
Forouzanfar, Mohamad, Baker, Fiona C., de Zambotti, Massimiliano, McCall, Corey, Giovangrandi, Laurent et Kovacs, Gregory T. A..
2018.
« Toward a better noninvasive assessment of preejection period: A novel automatic algorithm for B-point detection and correction on thoracic impedance cardiogram ».
Psychophysiology, vol. 55, nº 8.
Forouzanfar, Mohamad, de Zambotti, Massimiliano, Goldstone, Aimée et Baker, Fiona C..
2018.
« Automatic detection of hot flash occurrence and timing from skin conductance activity ».
In 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Honolulu, HI, USA, July 18-21, 2018)
pp. 1090-1093.
IEEE.
Fort, Valentin, Bouzid, Abdel-Hakim et Gratton, Michel.
2018.
« Analytical modeling of self-loosening of bolted joints ».
In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Fourmont, Paul, Gerlein, Luis Felipe, Fortier, François-Xavier, Cloutier, Sylvain G. et Nechache, Riad.
2018.
« Highly efficient thermoelectric microgenerators using nearly room temperature pulsed laser deposition ».
ACS Applied Materials and Interfaces, vol. 10, nº 12.
pp. 10194-10201.
Fournely, Marion, Petit, Yvan, Wagnac, Éric, Laurin, Jérôme, Callot, Virginie et Arnoux, Pierre-Jean.
2018.
« High-speed video analysis improves the accuracy of spinal cord compression measurement in a mouse contusion model ».
Journal of Neuroscience Methods, vol. 293.
pp. 1-5.
Fournier, Gregory et Petrillo, Fabio.
2018.
« Challenges and solutions on architecting blockchain systems ».
In CASCON '18: Proceedings of the 28th Annual International Conference on Computer Science and Software Engineering (Markham, ON, Canada, Oct. 29-31, 2018)
pp. 293-300.
Association for Computing Machinery.
Franche, Jean-François et Coulombe, Stéphane.
2018.
« Efficient H.264-to-HEVC transcoding based on motion propagation and post-order traversal of coding tree units ».
IEEE Transactions on Circuits and Systems for Video Technology, vol. 28, nº 12.
pp. 3452-3466.
Francis, Adel, Le Meur, Erwan et Miresco, Edmond.
2018.
« Space planning of material flow for Building projects: The chronographical modelling concept ».
In 17th International Conference on Computing in Civil and Building Engineering (ICCCBE) (Tampere, Finland, June 5-7, 2018)
Fraser, M. et Vaillancourt, C.. 2018. « L’UNESCO et l’OMS face à la santé durable ». Communication lors de la conférence : Journée UNESCO (Terrebonne, QC, Canada, 24 avril 2018).
Fraser, Marc, Fortier, Marlène, Foucher, Delphine, Roumier, Pierre-Hervé, Brousseau, Pauline, Fournier, Michel, Surette, Céline et Vaillancourt, Cathy.
2018.
« Exposure to low environmental concentrations of manganese, lead, and cadmium alters the serotonin system of blue mussels ».
Environmental Toxicology and Chemistry, vol. 37, nº 1.
pp. 192-200.
Freitas, R. C. F. et Melhado, S. B..
2018.
« O processo de adoção do BIM em uma construtora de grande porte de São Paulo ».
In XVII Encontro Nacional de Tecnologia do Ambiente Construído (ENTAC) (Foz do Iguaçu, Brésil, Nov. 12-14, 2018)
pp. 2386-2396.
Porte Alegre : ANTAC.
Freitas, R. C. F., Melhado, S. B. et Cardoso, F. F..
2018.
« Os desafios e os esforços da cadeia produtiva da construção civil para a adoção do BIM ».
In XVII Encontro Nacional de Tecnologia do Ambiente Construído (ENTAC) (Foz do Iguaçu, Brésil, Nov. 12-14, 2018)
pp. 1899-1911.
Porte Alegre : ANTAC. Friend, Evan, El-Sayegh, Batoul, Pressman, Gregg S., Di Labbio, Giuseppe, Obasare, Edinrin R. et Kadem, Lyes. 2018. « Orifice eccentricity accentuates flow disturbance due to severe mitral annular calcification ». Affiche présentée lors de la conférence : 4th Annual Scientific Meeting of the Heart Valve Society (New York City, NY, USA, Apr. 12-14, 2018).
Friend, Evan, El-Sayegh, Batoul, Pressman, Gregg S., Di Labbio, Giuseppe, Obasare, Edinrin R. et Kadem, Lyes.
2018.
« Orifice eccentricity accentuates flow disturbance due to severe mitral annular calcification ».
[Résumé d'une communication à une conférence]. Journal of the American Society of Echocardiography, vol. 31, nº 6.
B50.
Fry, C., Samson, C., McCausland, P. J. A., Ralchenko, M. et McLeod, T. K..
2018.
« Iron meteorite bulk densities determined via 3-D laser imaging ».
Meteoritics and Planetary Science, vol. 53, nº 6.
pp. 1164-1178.
Fu, Yanqing, Wei, Qiliang, Zhang, Gaixia et Sun, Shuhui.
2018.
« Advanced phosphorus-based materials for lithium/sodium-ion batteries: Recent developments and future perspectives ».
Advanced Energy Materials, vol. 8, nº 13.
Fu, Yanqing, Wei, Qiliang, Zhang, Gaixia, Wang, Xiaomin, Zhang, Jihai, Hu, Yongfeng, Wang, Dongniu, Zuin, Lucia, Zhou, Tao, Wu, Yucheng et Sun, Shuhui.
2018.
« High-performance reversible aqueous Zn-Ion battery based on porous MnOx nanorods coated by MOF-derived N-doped carbon ».
Advanced Energy Materials, vol. 8, nº 26.
Gadalla, Mahmoud, François, Véronique et Ung, Bora.
2018.
« Realization of multicore fiber reconfigurable optical add drop multiplexer ».
IEEE Photonics Technology Letters, vol. 30, nº 3.
pp. 281-284.
Gadalla, Mahmoud, François, Véronique et Ung, Bora.
2018.
« Spatial light modulator optical switch for multicore fiber ».
In 2018 Photonics North (PN 2018) (Montréal, QC, Canada, June 05-07, 2018)
IEEE.
Gagnon, François, Dahman, Ghassan et Poitau, Gwenael.
2018.
« Extending the ITU-R P.530 deep-fading outage probability results to SIMO-MRC and MIMO-MRC line-of-sight systems ».
IEEE Wireless Communications Letters, vol. 7, nº 6.
pp. 1086-1089.
Galinier, Stéphane et Laporte, Claude Y..
2018.
« Connecting business development and systems engineering with ISO/IEC 29110 standard in small and medium enterprises of France ».
In 2018 IEEE International Systems Engineering Symposium (ISSE) (Rome, Italy, Oct 1-3, 2018)
Piscataway, NJ, USA : IEEE.
Gambs, Sebastien, Lolive, Julien et Robert, Jean-Marc.
2018.
« Entwining sanitization and personalization on databases ».
In 13th ACM Symposium on Information, Computer and Communications Security (ASIACCS 2018) (Incheon, Republic of Korea, June 4, 2018 - June 8, 2018)
pp. 207-219.
Association for Computing Machinery Inc.
Gandi, Apparao, Carter, Alan et Singh, Dharamveer.
2018.
« Effect of binder type on Full Depth Reclamation material behaviour ».
International Journal of Pavement Research and Technology, vol. 11, nº 8.
pp. 888-898.
Garcia Cano, Edgar, Arambula, Fernando, Duong, Luc, Bellefleur, Christian, Roy Beaudry, Marjolaine, Joncas, Julien et Parent, Stephan.
19 novembre 2018.
« Classification dynamique de courbes vertébrales anormales ».
[Article de recherche]. Substance ÉTS.
Garcia Cano, Edgar, Arambula, Fernando, Duong, Luc, Bellefleur, Christian, Roy Beaudry, Marjolaine, Joncas, Julien et Parent, Stephan.
19 novembre 2018.
« Dynamic Classification of Abnormal Spinal Curves ».
[Article de recherche]. Substance ÉTS.
Garcia-Cano, Edgar, Arambula Cosio, Fernando, Duong, Luc, Bellefleur, Christian, Roy-Beaudry, Marjolaine, Joncas, Julie, Parent, Stefan et Labelle, Hubert.
2018.
« Dynamic ensemble selection of learner-descriptor classifiers to assess curve types in adolescent idiopathic scoliosis ».
Medical and Biological Engineering and Computing, vol. 56, nº 12.
pp. 2221-2231.
Garcia-Cano, Edgar, Arambula Cosio, Fernando, Duong, Luc, Bellefleur, Christian, Roy-Beaudry, Marjolaine, Joncas, Julie, Parent, Stefan et Labelle, Hubert.
2018.
« Prediction of spinal curve progression in adolescent idiopathic scoliosis using random forest regression ».
Computers in Biology and Medicine, vol. 103.
pp. 34-43.
García-Floriano, Andrés, López-Martín, Cuauhtémoc, Yáñez-Márquez, Cornelio et Abran, Alain.
2018.
« Support vector regression for predicting software enhancement effort ».
Information and Software Technology, vol. 97.
pp. 99-109.
Garfa, Arbia, Carter, Alain et Dony, Anne.
2018.
« Rutting resistance of HMA rehabilitated with micro-surfacing ».
Open Journal of Civil Engineering, vol. 8, nº 2.
pp. 245-255.
Garg, Sahil, Kaur, Kuljeet, Kumar, Neeraj, Batra, Shalini et Obaidat, Mohammad S..
2018.
« HyClass: Hybrid classification model for anomaly detection in cloud environment ».
In IEEE International Conference on Communications (ICC) (Kansas City, MO, USA, May 20-24, 2018)
IEEE.
Garg, Sahil, Singh, Amritpal, Kaur, Kujeet, Batra, Shalini, Kumar, Neeraj et Obaidat, Mohammad S..
2018.
« Edge-based content delivery for providing QoE in wireless networks using quotient filter ».
In IEEE International Conference on Communications (ICC) (Kansas City, MO, USA, May 20-24, 2018)
IEEE.
Gargour, Christian S., Gabrea, Marcel, Bensoussan, David et Ramachandran, Venkat.
2018.
« Théorie et conception des filtres analogiques ».
2e éd.
Québec : Presses de l'Université du Québec. 592 p.
Gaudreault, Martin, Joubair, Ahmed et Bonev, Ilian.
2018.
« Self-calibration of an industrial robot using a novel affordable 3D measuring device ».
Sensors, vol. 18, nº 10.
Gaudreault, Pierre-Olivier, Gosselin, Nadia, Lafortune, Marjolaine, Deslauriers-Gauthier, Samuel, Martin, Nicolas, Bouchard, Maude, Dubé, Jonathan, Lina, Jean-Marc, Doyon, Julien et Carrier, Julie.
2018.
« The association between white matter and sleep spindles differs in young and older individuals ».
Sleep, vol. 41, nº 9.
Gauthier, Baptiste, Thon, Aurelien et Bélanger, Pierre.
2018.
« Comparison of a piezoceramic transducer and an EMAT for the omnidirectional transduction of SH0 ».
In 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017)
Coll. « AIP Conference Proceedings », vol. 1949.
American Institute of Physics.
Gawanmeh, Amjad, Alomari, Ahmad, April, Alain, Alwadi, Ali et Parvin, Sazia.
2018.
« Green Evolutionary-Based Algorithm for Multiple Services Scheduling in Cloud Computing ».
In
Cloud Computing Technologies for Green Enterprises.
pp. 51-82. Hershey, PA, USA : IGI Global.
Gedamu, Dawit, Asuo, Ivy M., Benetti, Daniele, Basti, Matteo, Ka, Ibrahima, Cloutier, Sylvain G., Rosei, Federico et Nechache, Riad.
2018.
« Solvent-antisolvent ambient processed large grain size perovskite thin films for high-performance solar cells ».
Scientific Reports, vol. 8.
p. 11.
Genc-Nayebi, Necmiye et Abran, Alain.
2018.
« A measurement design for the comparison of expert usability evaluation and mobile app user reviews ».
In Proceedings of the Academic Papers at IWSM Mensura 2018 "COSMIC Function Points - Fundamentals for Software Effort Estimation" held in conjunction with The China Software Cost Measurement Conference (CSCM 2018) (Beijing, China, Sept. 19-20, 2018)
Coll. « CEUR Workshop Proceedings », vol. 2207.
pp. 138-144.
CEUR-WS.
Genoyer, Julie, Soulestin, Jérémie et Demarquette, Nicole R..
2018.
« Influence of the molar masses on compatibilization mechanism induced by two block copolymers in PMMA/PS blends ».
Journal of Rheology, vol. 62, nº 3.
pp. 681-693.
Gerard, Ian J., Kersten-Oertel, Marta, Drouin, Simon, Hall, Jeffrey A., Petrecca, Kevin, De Nigris, Dante, Di Giovanni, Daniel A., Arbel, Tal et Collins, D. Louis.
2018.
« Combining intraoperative ultrasound brain shift correction and augmented reality visualizations: a pilot study of eight cases ».
Journal of Medical Imaging, vol. 5, nº 2.
Gerhardt, Jérémie, Kedjar, M'Hand, Yoo, Hyunjin, Akhavan, Tara et Vazquez, Carlos.
2018.
« OLED power consumption model and its application to a perceptually lossless power reduction algorithm ».
In 26th Color and Imaging Conference: Color Science and Engineering Systems, Technologies, and Applications, Technical Papers and Proceedings (Vancouver, BC, Canada, Nov. 12-16, 2018)
pp. 25-31.
Society for Imaging Science and Technology.
Getu, Tilahun M., Ajib, Wessam et Landry, René.
2018.
« Performance analysis of energy-based RFI detector ».
IEEE Transactions on Wireless Communications, vol. 17, nº 10.
pp. 6601-6616.
Getu, Tilahun M., Ajib, Wessam et Landry, René.
2018.
« Simple F–Test based spectrum sensing techniques for multi-antenna cognitive radios ».
IEEE Transactions on Communications, vol. 66, nº 11.
pp. 5081-5096.
Getu, Tilahun M., Ajib, Wessam et Landry, René Jr..
2018.
« A simple F-test based multi-antenna spectrum sensing technique ».
In 2018 IEEE 88th Vehicular Technology Conference (VTC-Fall) (Chicago, IL, USA, Aug. 27-30, 2018)
Institute of Electrical and Electronics Engineers Inc..
Getu, Tilahun M., Ajib, Wessam et Landry, René Jr..
2018.
« A simple F-test based spectrum sensing technique for mimo cognitive radio networks ».
In 14th International Conference on Wireless and Mobile Computing, Networking and Communications (Limassol, Cyprus, Oct. 15-17, 2018)
Piscataway, NJ, USA : IEEE.
Getu, Tilahun M., Ajib, Wessam et Landry, René Jr..
2018.
« An eigenvalue-based multi-antenna RFI detection algorithm ».
In IEEE 88th Vehicular Technology Conference (VTC-Fall) (Chicago, IL, USA, Aug. 27-30, 2018)
Piscataway, NJ, USA : IEEE.
Getu, Tilahun M., Ajib, Wessam et Landry, René Jr..
2018.
« Energy-based RFI detection: theory and results ».
In 14th International Conference on Wireless and Mobile Computing, Networking and Communications (Limassol, Cyprus, Oct. 15-17, 2018)
pp. 161-168.
Piscataway, NJ, USA : IEEE Computer Society.
Getu, Tilahun M., Ajib, Wessam et Landry, René Jr..
2018.
« Power-based broadband RF interference detector for wireless communication systems ».
IEEE Wireless Communications Letters, vol. 7, nº 6.
pp. 1002-1005.
Getu, Tilahun M., Ajib, Wessam et Landry, René Jr..
2018.
« Power-based continuous wave RFI detector for RF operating systems ».
In 2018 IEEE Global Conference on Signal and Information Processing (GlobalSIP) (Anaheim, CA, USA, Nov. 26-29, 2018)
pp. 1099-1103.
Piscataway, NJ, USA : IEEE.
Getu, Tilahun Melkamu, Ajib, Wessam et Landry, René Jr.
2018.
« Matrix-based joint interference and channel order enumerators for SIMO systems suffering from RFI ».
In International Conference on Computing, Networking and Communications (ICNC) (Maui, HI, USA, Mar. 05-08, 2018)
pp. 305-309.
IEEE.
Getu, Tilahun Melkamu, Ajib, Wessam, Yeste-Ojeda, Omar A. et Landry, René Jr..
2018.
« Tensor-based efficient multi-interferer rfi excision: Results using real-world data ».
In International Conference on Computing, Networking and Communications (ICNC) (Maui, HI, USA, Mar. 05-08, 2018)
pp. 917-921.
IEEE.
Ghafarizadeh, S. B., Fréchette, M. F. et David, E..
2018.
« Fabrication and dielectric, mechanical, and thermal properties of Low-Density Polyethylene (LDPE) composites containing surface-passivated silicon (Si/SiO2Core/Shell Nanoparticles) ».
Polymer - Plastics Technology and Engineering, vol. 57, nº 4.
pp. 327-334.
Ghaib, Maha, Shateri, Mohammadhadi, Thomson, Douglas et Svecova, Dagmar.
2018.
« Study of FRP bars under tension using acoustic emission detection technique ».
Journal of Civil Structural Health Monitoring, vol. 8, nº 2.
pp. 285-300.
Ghannem, Adnane, Kessentini, Marouane, Hamdi, Mohammad Salah et El Boussaidi, Ghizlane.
2018.
« Model refactoring by example: A multi-objective search based software engineering approach ».
Journal of Software: Evolution and Process, vol. 30, nº 4.
Gharaaty, Sepehr, Shu, Tingting, Joubair, Ahmed, Xie, Wen Fang et Bonev, Ilian A..
2018.
« Online pose correction of an industrial robot using an optical coordinate measure machine system ».
International Journal of Advanced Robotic Systems, vol. 15, nº 4.
Gharagozloo, M., Pham, X-T. et Nguyen, C-C.
2018.
« Feasibility study of aluminium deposition by robotic MIG welding process ».
In CanWeld Conference 2018 (Winnipeg, MB, Canada, Sept. 12-13, 2018)
Ghazi, G., Deviller, M. H. et Botez, R. M.. 2018. « Development of an efficient algorithm for Cessna Citation X speed optimization in cruise ». Communication lors de la conférence : 20th International Conference on Engineering Education and Research (Innsbruck, Austria, Jan. 25-26, 2018).
Gholami, E. et Demers, V..
2018.
« Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ».
In Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018 (San Antonio, TX, USA, June 17-20, 2018)
pp. 253-264.
Metal Powder Industries Federation.
Gholami, Ehsan et Demers, Vincent.
2018.
« Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ».
International Journal of Mechanical and Production Engineering, vol. 6, nº 10.
pp. 33-38.
Ghomi-Avili, Morteza, Jalali Naeini, Seyed Gholamreza, Tavakkoli-Moghaddam, Reza et Jabbarzadeh, Armin.
2018.
« A fuzzy pricing model for a green competitive closed-loop supply chain network design in the presence of disruptions ».
Journal of Cleaner Production, vol. 188.
pp. 425-442.
Ghommam, Jawhar, El Ferik, Sami et Saad, Maarouf.
2018.
« Robust adaptive path-following control of underactuated marine vessel with off-track error constraint ».
International Journal of Systems Science, vol. 49, nº 7.
pp. 1540-1558.
Ghommam, Jawhar et Saad, Maarouf.
2018.
« Adaptive leader-follower formation control of underactuated surface vessels under asymmetric range and bearing constraints ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 2.
pp. 852-865.
Ghrada, Nadir, Zhani, Mohamed Faten et Elkhatib, Yehia.
2018.
« Price and performance of cloud-hosted virtual network functions: Analysis and future challenges ».
In 4th IEEE Conference on Network Softwarization and Workshops (NetSoft) (Montreal, QC, Canada, June 25-29, 2018)
pp. 482-487.
Piscataway, NJ, USA : IEEE.
Ghrairi, Naoures, Kpodjedo, Sègla, Barrak, Amine, Petrillo, Fabio et Khomh, Foutse.
2018.
« The State of practice on Virtual Reality (VR) applications: An exploratory study on github and stack overflow ».
In 2018 IEEE International Conference on Software Quality, Reliability and Security (QRS) (Lisbon, Portugal, July 16-20, 2018)
pp. 356-366.
Institute of Electrical and Electronics Engineers Inc.. Giard, Pascal. 2018. « Polar codes: algorithms and implementation aspects ». Communication lors de la conférence : Arbeitsgemeinschaft in Codierungstheorie und Kryptographie (Spring 18) (Zurich, Suisse, June 06, 2018). Giard, Pascal, Balatsoukas-Stimming, Alexios et Burg, Andreas. 2018. « Blind detection of polar codes ». Communication lors de la conférence : 2018 Information Theory and Applications Workshop (ITA) (San Diego, CA, USA, Feb. 11-16, 2018).
Giard, Pascal, Balatsoukas-Stimming, Alexios et Burg, Andreas.
2018.
« On the tradeoff between accuracy and complexity in blind detection of polar codes ».
In International Symposium on Turbo Codes & Iterative Information Processing 2018 (ISTC) (Hong Kong, China, Dec. 03-07, 2018)
IEEE.
Giard, Pascal, Balatsoukas-Stimming, Alexios, Sarkis, Gabi, Thibeault, Claude et Gross, Warren J..
2018.
« Fast low-complexity decoders for low-rate polar codes ».
Journal of Signal Processing Systems, vol. 90, nº 5.
pp. 675-685.
Giard, Pascal et Burg, Andreas.
2018.
« Fast-SSC-flip decoding of polar codes ».
In IEEE Wireless Communications and Networking Conference Workshops (WCNCW) (Barcelona, Spain, Apr. 15-18, 2018)
pp. 73-77.
IEEE.
Giard, Pascal, Sarkis, Gabi, Leroux, Camille, Thibeault, Claude et Gross, Warren J..
2018.
« Low-latency software polar decoders ».
Journal of Signal Processing Systems, vol. 90, nº 5.
pp. 761-775.
Gibout, Stéphane, Franquet, Erwin, Haillot, Didier, Bédécarrats, Jean-Pierre et Dumas, Jean-Pierre.
2018.
« Challenges of the usual graphical methods used to characterize phase change materials by differential scanning calorimetry ».
Applied Sciences, vol. 8, nº 1.
Glas, Robin, Lautz, Laura, McKenzie, Jeffrey, Mark, Bryan, Baraer, Michel, Chavez, Daniel et Maharaj, Laura.
2018.
« A review of the current state of knowledge of proglacial hydrogeology in the Cordillera Blanca, Peru ».
Wiley Interdisciplinary Reviews-Water, vol. 5, nº 5.
Glowacki, Adrian, Bouin, Céline, Ethier, Yannic, Dubé, Jean-Sébastien et Duhaime, François.
2018.
« Using CT-scanning to study the internal erosion in soils ».
In GeoEdmonton 2018 – 71st Canadian Geotechnical Conference and the 13th Joint CGS/IAH-CNC Groundwater Conference (Edmonton, AB, Canada, Sept. 23-26, 2018)
Golaghazadeh, Firouzeh, Coulombe, Stéphane, Coudoux, François et Corlay, Patrick.
2018.
« Checksum-filtered list decoding applied to H.264 and H.265 video error correction ».
IEEE Transactions on Circuits and Systems for Video Technology, vol. 28, nº 8.
pp. 1993-2006.
Golaghazadeh, Firouzeh, Coulombe, Stéphane, Coudoux, François-Xavier et Corlay, Patrick.
2018.
« The impact of H.264 non-desynchronizing bits on visual quality and its application to robust video decoding ».
In 2018 12th International Conference on Signal Processing and Communication Systems (ICSPCS) (Cairns, Australia, Dec. 17-19, 2018)
Piscataway, NJ, USA : IEEE.
Goli, Alizera, Aazami, Adel et Jabbarzadeh, Armin.
2018.
« Accelerated cuckoo optimization algorithm for capacitated vehicle routing problem in competitive conditions ».
International Journal of Artificial Intelligence, vol. 16, nº 1.
pp. 88-112.
Graff, J. R., Ernst, R. E. et Samson, C..
2018.
« Evidence for triple-junction rifting focussed on local magmatic centres along Parga Chasma, Venus ».
Icarus, vol. 306.
pp. 122-138. Grant, Danny A., Lévesque, Vincent, Redelsheimer, Elena et Parker, Daniel Gregory (inventeurs) 24 juillet 2018. « Wearable device with flexibly mounted haptic output device ». Immersion Corporation (titulaire(s)). Brevet américain US 10,032,345. Grant, Danny, Lévesque, Vincent, Weddle, Amaya, Birnbaum, David, Cruz-Hernandez, Juan Manuel et Saboune, Jamal (inventeurs) 31 juillet 2018. « Systems, methods for haptic fiddling ». Immersion Corporation (titulaire(s)). Brevet américain US 10,037,081. Grant, Danny, Pimentel, Pamela, Gervais, Eric, Lévesque, Vincent, Kapelus, Aaron, Chang, Mina, Parker, Daniel, Bimbaum, David, Jiang, Li et Rank, Stephen (inventeurs) 9 janvier 2018. « Systems and methods for enhanced television interaction ». Immersion Corporation (titulaire(s)). Brevet américain US 9,866,924.
Graziani, A., Di Benedetto, H., Perraton, D., Sauzéat, C., Hofko, B., Nguyen, Q. T., Pouget, S., Poulikakos, L. D., Tapsoba, N., Grenfell, J., Cannone Falchetto, A., Wistuba, M. et Petit, C..
2018.
« Three-dimensional characterisation of linear viscoelastic properties of bituminous mixtures ».
In
Testing and characterization of sustainable innovative bituminous materials and systems.
Coll. « RILEM State-of-the-Art Reports », vol. 24.
pp. 75-125. Springer.
Graziani, Andrea, Iafelice, Christian, Raschia, Simone, Perraton, Daniel et Carter, Alan.
2018.
« A procedure for characterizing the curing process of cold recycled bitumen emulsion mixtures ».
Construction and Building Materials, vol. 173.
pp. 754-762. Graziani, Andrea, Lafelice, Christian, Raschia, Simone, Carter, Alan et Perraton, Daniel. 2018. « A laboratory approach for characterizing the evolutive behavior of cold recycled mixtures ». Affiche présentée lors de la conférence : TRB 2018 Annual Meeting (Washington, DC, USA, Jan. 7-11, 2018).
Grichi, Yosra, Beauregard, Yvan et Dao, Thien-My.
2018.
« Optimization of obsolescence forecasting using new hybrid approach based on the RF method and the meta-heuristic genetic algorithm ».
American Journal of Management, vol. 18, nº 2.
pp. 27-38.
Grichi, Yosra, Dao, Thien-My et Beauregard, Yvan.
2018.
« A new approach for optimal obsolescence forecasting based on the random forest (RF) technique and meta-heuristic particle swarm optimization (PSO) ».
In Proceedings of the International Conference on Industrial Engineering and Operations Management (Paris, France, July 26-27, 2018)
pp. 1680-1688.
IOM Society International.
Grigorie, Teodor L. et Botez, Ruxandra M..
2018.
« Control techniques for a smart actuated morphing wing model: Design, numerical simulation and experimental validation ».
In
Morphing Wing Technologies: Large Commercial Aircraft and Civil Helicopters.
pp. 351-397. Cambridge, MA : Butterworth Heinemann.
Gruson, Adrien, Hua, Binh-Son, Vibert, Nicolas, Nowrouzezahrai, Derek et Hachisuka, Toshiya.
2018.
« Gradient-domain volumetric photon density estimation ».
ACM Transactions on Graphics, vol. 37, nº 4.
Guérineau, Benjamin, Rivest, Louis, Bricogne, Matthieu, Durupt, Alexandre et Eynard, Benoît.
2018.
« Towards a design-method selection framework for multidisciplinary product development ».
In 15th International Design Conference (DESIGN 2018) (Dubrovnik, Croatia, May 21-24, 2018)
Coll. « Proceedings of International Design Conference, DESIGN »
pp. 2879-2890.
Faculty of Mechanical Engineering and Naval Architecture.
Gueziri, Houssem-Eddine, McGuffin, Michael J. et Laporte, Catherine.
2018.
« Latency management in scribble-based interactive segmentation of medical images ».
IEEE Transactions on Biomedical Engineering, vol. 65, nº 5.
pp. 1140-1150.
Gundelwein, L., Miró, J., Gonzalez Barlatay, F., Lapierre, C., Rohr, K. et Duong, L..
2018.
« Personalized stent design for congenital heart defects using pulsatile blood flow simulations ».
Journal of Biomechanics, vol. 81.
pp. 68-75.
Guo, Baoqi, Aranas, Clodualdo, Foul, Anes, Ji, Xiankun, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2018.
« Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ».
Materials Science and Engineering: A, vol. 729.
pp. 119-124.
Guo, Baoqi, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2018.
« Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 49, nº 12.
pp. 5956-5961.
Guo, Chao, Shoudao, Huang, Wang, Jiabao, Yaojing, Feng et Wang, Qingsong.
2018.
« Design of cryogenic permanent magnet synchronous motor for submerged liquefied natural gas pump ».
IEEE Transactions on Magnetics, vol. 54, nº 11.
Gupta, Aarush, Agrawal, Dakshit, Chauhan, Hardik, Dolz, Jose et Pedersoli, Marco.
2018.
« An attention model for group-level emotion recognition ».
In 20th ACM International Conference on Multimodal Interaction (ICIM '18) (Boulder, CO, USA, Oct. 16-20, 2018)
pp. 611-615.
ACM.
Gupta, Anubha A., Arunachalam, Shivaram, Cloutier, Sylvain G. et Izquierdo, Ricardo.
2018.
« Fully aerosol-jet printed, high-performance nanoporous ZnO ultraviolet photodetectors ».
ACS Photonics, vol. 5, nº 10.
pp. 3923-3929. Gupta, Anubha A., Arunachalam, Shivaram, Cloutier, Sylvain G. et Izquierdo, Ricardo. 2018. « Fully printed, ZnO photodetectors for ultraviolet sensing ». Communication lors de la conférence : Photonics North 2018 (Montreal, QC, Canada, June 05-07, 2018). Gupta, Shreyank, Haïat, Guillaume, Laporte, Catherine et Belanger, Pierre. 2018. « Effect of acoustic impedance mismatch between skin and bone on transcranial ultrasound transmission ». Affiche présentée lors de la conférence : 176TH Meeting of the Acoustical Society of America, 2018 Acoustics Week in Canada). Guyot, C., Samaei, S., Cerruti, M. et Lerouge, S.. 2018. « Designing a chitosan-based thermosensible hydrogel with high bioadhesive and mechanical properties, and compatible with cell therapy ». Affiche présentée lors de la conférence : Society for Biomaterials - 2018 Annual Meeting & Exposition (Atlanta, GA, USA, Apr. 11-14, 2018).
Guyot, Capucine et Lerouge, Sophie.
2018.
« Can we achieve the perfect injectable scaffold for cell therapy? ».
[Éditorial]. Future Science, vol. 4, nº 4.
Habibzadeh Boukani, Hamid, Viens, Martin, Tahan, Souheil-Antoine et Gagnon, Martin.
2018.
« Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 5-8.
pp. 2201-2211.
Haddaji, Nassim, Bayati, Abdolkhalegh, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« BackHauling-as-a-Service (BHaaS) for 5G optical sliced networks: an optimized TCO approach ».
Journal of Lightwave Technology, vol. 36, nº 18.
pp. 4006-4017.
Haddaji, Nassim, Nguyen, Kim et Cheriet, Mohamed.
2018.
« Towards end-to-end integrated optical packet network: Empirical analysis ».
Optical Switching and Networking, vol. 27.
pp. 18-39.
Hafemann, Luiz G., Oliveira, Luiz S. et Sabourin, Robert.
2018.
« Fixed-sized representation learning from offline handwritten signatures of different sizes ».
International Journal on Document Analysis and Recognition, vol. 21, nº 3.
pp. 219-232. Hagemeister, N., Bureau, N., Fuentes, A., Cagnin, A., de Polo, L. et Choinière, M.. 2018. « Knee function deficiencies evolves as osteoarthritic radiographic severity increases ». Communication lors de la conférence : 12th 12th World Congress of the International Society of Physical and Rehabilitation Medicine (ISPRM) (Paris, France, July 08-12, 2018). Hagemeister, N., Zhang, C., Bascans, C., Girinon, F., Gajny, L., Tétreault, P. et Skalli, W.. 2018. « Bi-planar low dose X-Ray method for personalised 3D modeling of the scapula and automated computation of morphological parameters ». Communication lors de la conférence : CARS 2018 Computer Assisted Radiology and Surgery - 32nd International Congress and Exhibition (Berlin, Germany, June 20-23, 2018). Hagemeister, Nicola, Mezghani, Neila, Tétreault, Patrice et Skalli, Wafa. 2018. « Lien entre la morphologie de la scapula, le diagnostic imagerie et la fonction de l’épaule ». Communication lors de la conférence : 38ème journée de la recherche du POES et de la Division d’orthopédie de l’Université de Montréal (Montreal, QC, Canada, 4 mai 2018).
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2018.
« Quality issue in forecasting problem of production and maintenance policy for production unit ».
International Journal of Production Research, vol. 56, nº 18.
pp. 6147-6163.
Hamdan, Sadeque, Cheaitou, Ali, Larbi, Rim et Alsyouf, Imad.
2018.
« Moving toward sustainability in managing assets: A sustainable travelling purchaser problem ».
In 4th IEEE International Conference on Logistics Operations Management (Le Havre, France, Apr. 10-12, 2018)
Institute of Electrical and Electronics Engineers.
Hammad, Amin, Motamedi, Ali, Yabuki, Nobuyoshi, Taher, Alhusain et Bahreini, Fardin.
2018.
« Towards unified ontology for modeling lifecycle inspection and repair information of civil infrastructure systems ».
In 17th International Conference on Computing in Civil and Building Engineering (Tampere, Finland, June 22-24, 2018)
pp. 975-982.
Hammou, Mahmoud, Bouzidane, Ahmed, Thomas, Marc, Benariba, Aboubakeur et Bouzit, Mohamed.
2018.
« Static and dynamic characteristics of an orifice compensated three-pad hydrostatic squeeze film damper ».
Industrial Lubrication and Tribology, vol. 70, nº 6.
pp. 1078-1085.
Harker, Matthew, O'Leary, Paul, Plessing, Lea, Hergan, Patrick et Fauster, Ewald.
2018.
« Real-time tensor polynomial approximation of crosshatch measured geometric surface data ».
In IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement (Houston, TX, USA, May 14-17, 2018)
Institute of Electrical and Electronics Engineers.
Harker, Matthew et Rath, Gerhard.
2018.
« Discrete inverse problem approach to path tracking in state space form ».
In International Conference on Applied Electronics (Pilsen, Czech Republic, Sept. 11-12, 2018)
IEEE Computer Society.
Harker, Matthew et Rath, Gerhard.
2018.
« Global least squares for time-domain system identification of state-space models ».
In 7th Mediterranean Conference on Embedded Computing, MECO 2018 - Including ECYPS 2018 (Budva, Montenegro, June 10-14, 2018)
Institute of Electrical and Electronics Engineers.
Harris, Kyle, White, Don, Samson, Claire et Tao, Jiang.
2018.
« 4D vertical seismic profile modeling of CO2 injection scenarios to evaluate field results at Aquistore ».
International Journal of Greenhouse Gas Control, vol. 72.
pp. 192-207.
Hashem, Mortazavi, Mehrjerdi, Hasan, Saad, Maarouf, Lefebvre, Serge, Asber, Dalal et Lenoir, Laurent.
2018.
« An impedance-based method for distribution system monitoring ».
IEEE Transactions on Smart Grid, vol. 9, nº 1.
pp. 220-229.
Hasib, Omar Al-Terkawi, Crepeau, Daniel, Awad, Thomas, Dulipovici, Andrei, Savaria, Yvon et Thibeault, Claude.
2018.
« Exploiting built-in delay lines for applying launch-on-capture at-speed testing on self-timed circuits ».
In IEEE 36th VLSI Test Symposium (VTS) (San Francisco, CA, USA, Apr. 22-25, 2018)
Los Alamitos, CA, USA : IEEE Computer Society.
Hawedi, Mohamed, Talhi, Chamseddine et Boucheneb, Hafina.
2018.
« Security as a service for public cloud tenants (SaaS) ».
In 9th International Conference on Ambient Systems, Networks and Technologies (ANT 2018) / The 8th International Conference on Sustainable Energy Information Technology (SEIT-2018) (Porto, Portugal, May 08-11, 2018)
Coll. « Procedia Computer Science », vol. 130.
pp. 1025-1030.
Hawedi, Mohamed, Talhi, Chamseddine et Boucheneb, Hanifa.
2018.
« Multi-tenant intrusion detection system for public cloud (MTIDS) ».
Journal of Supercomputing, vol. 74, nº 10.
pp. 5199-5230.
Hawila, Abed Al Waheed, Merabtine, Abdelatif, Chemkhi, Mahdi, Bennacer, Rachid et Troussier, Nadège.
2018.
« An analysis of the impact of PMV-based thermal comfort control during heating period: A case study of highly glazed room ».
Journal of Building Engineering, vol. 20.
pp. 353-366.
Hawila, Abed Al- Waheed, Merabtine, Abdelatif, Chemkhi, Mahdi, Bennacer, Rachid et Troussier, Nadège.
2018.
« Influence of PMV-based control on energy consumption and thermal comfort during heating period in a highly glazed room ».
In Building Simulation Conference (Bordeaux, France, 15-16 mai 2018)
International Building Performance Simulation Association.
Hay, A., Samson, C. et Ellery, A..
2018.
« Robotic magnetic mapping with the Kapvik planetary micro-rover ».
International Journal of Astrobiology, vol. 17, nº 3.
pp. 218-227.
Hay, A., Samson, C., Tuck, L. et Ellery, A..
2018.
« Magnetic surveying with an unmanned ground vehicle ».
Journal of Unmanned Vehicle Systems, vol. 6, nº 4.
pp. 249-266.
Heba, Abdussalam et Assaf, Gabriel J..
2018.
« Bayes linear regression performance model depending on experts' knowledge and current road condition ».
Advances in Civil Engineering Materials, vol. 7, nº 3.
pp. 428-445.
Heba, Abdussalam et Assaf, Gabriel J..
2018.
« Road performance prediction model for the libyan road network depending on experts’ knowledge and current road condition using bayes linear regression ».
In Recent Developments in Railway Track and Transportation Engineering : Proceedings of the 1st GeoMEast International Congress and Exhibition, Egypt 2017 on Sustainable Civil Infrastructures (Sharm El Sheikh, Egypt, July 15-19, 2017)
Coll. « Sustainable Civil Infrastructures »
pp. 153-167.
Springer International Publishing.
Heidarpour, Behdad, Dziong, Zbigniew, Lau, Wing Cheong et Vakilinia, Shahin.
2018.
« Pricing the volume-based data services in cellular wireless markets ».
IEEE Transactions on Network and Service Management, vol. 15, nº 1.
pp. 260-274.
Helal, E., Amurin, L. G., Carastan, D. J., de Sousa Jr., R. R., David, E., Fréchette, M. et Demarquette, N. R..
2018.
« Tuning the mechanical and dielectric properties of clay-containing thermoplastic elastomer nanocomposites ».
Polymer Engineering and Science, vol. 58.
E174-E181.
Helal, E., Pottier, C., David, E., Fréchette, M. et Demarquette, N. R..
2018.
« Polyethylene/Thermoplastic elastomer/Zinc Oxide nanocomposites for high voltage insulation applications: Dielectric, mechanical and rheological behavior ».
European Polymer Journal, nº 100.
pp. 258-269.
Herceg, Marijan, Kaddoum, Georges, Vranjes, Denis et Soujeri, Ebrahim.
2018.
« Permutation Index DCSK modulation technique for secure multi-user high-data-rate communication systems ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 4.
pp. 2997-3011.
Herceg, Marijan, Vranješ, Denis, Kaddoum, Georges et Soujeri, Ebrahim.
2018.
« Commutation Code Index DCSK modulation technique for high-data-rate communication systems ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 65, nº 12.
pp. 1954-1958.
Hernandez-Dominguez, Laura, Ratté, Sylvie, Sierra, Gerardo et Roche-Bergua, Andres.
27 novembre 2018.
« Automatic Detection of Alzheimer’s from Picture Descriptions ».
[Article de recherche]. Substance ÉTS.
Hernandez-Dominguez, Laura, Ratté, Sylvie, Sierra, Gerardo et Roche-Bergua, Andres.
27 novembre 2018.
« Détection automatique de l’Alzheimer par description d’image ».
[Article de recherche]. Substance ÉTS.
Hernández-Domínguez, Laura, Ratté, Sylvie, Sierra-Martínez, Gerardo et Roche-Bergua, Andrés.
2018.
« Computer-based evaluation of Alzheimer's disease and mild cognitive impairment patients during a picture description task ».
Alzheimer's and Dementia: Diagnosis, Assessment and Disease Monitoring, vol. 10.
pp. 260-268.
Hertz, Alain, Montagné, Romain et Gagnon, François.
2018.
« Online algorithms for the maximum k-colorable subgraph problem ».
Computers and Operations Research, vol. 91.
pp. 209-224.
Hidaka, N., Michikawa, T., Motamedi, A., Yabuki, N. et Fukuda, T..
2018.
« Polygonization of point clouds of repetitive components in civil infrastructure based on geometric similarities ».
Automation in Construction, vol. 86.
pp. 99-117.
Hidaka, Nao, Michikawa, Takashi, Motamedi, Ali, Yabuki, Nobuyoshi et Fukuda, Tomohiro.
2018.
« Polygonization of point cloud of tunnels using lofting operation ».
International Journal of Automation Technology, vol. 12, nº 3.
pp. 356-368.
Higger, Matt, Shenton, Martha et Bouix, Sylvain.
2018.
« Pairwise, ordinal outlier detection of traumatic brain injuries ».
In Brainlesion: Glioma, Multiple Sclerosis, Stroke and Traumatic Brain Injuries : Third International Workshop, BrainLes 2017, Held in Conjunction with MICCAI 2017 (Quebec City, QC, Canada, Sept. 14, 2017)
Coll. « Lecture Notes in Computer Science », vol. 10670.
pp. 100-110.
Springer Verlag.
Higgins, J., Nadeau, S., Emeraux, B., Akremi, H. et Aissaoui, R..
2018.
« Effects of asymmetrical resistance imposed during repeated bilateral upper limb pushing movements on bilateral coordination post-stroke ».
Annals of Physical and Rehabilitation Medicine, vol. 61, nº suppl..
e487-e488.
Hoa Ngan, Nguyen et Bocher, Philippe.
2018.
« Finite element analysis simulation of the effect of induction hardening on rolling contact fatigue ».
Journal of Tribology, vol. 140, nº 6.
Hochuli, A. G., Oliveira, L. S., Britto Jr., A. S. et Sabourin, R..
2018.
« Handwritten digit segmentation: Is it still necessary? ».
Pattern Recognition, vol. 78.
pp. 1-11.
Hochuli, Andre G., Oliveira, Luiz S., De Souza Britto, Alceu et Sabourin, Robert.
2018.
« Segmentation-free approaches for handwritten numeral string recognition ».
In 2018 International Joint Conference on Neural Networks (IJCNN) (Rio de Janeiro, Brazil, July 08-13, 2018)
Piscataway, NJ, USA : IEEE. Hof, L. A., Wüthrich, R. et Kwok, T.. 2018. « Industry 4.0 and its impact on aviation ». Communication lors de la conférence : John Molson School of Business, John Molson Executive Centre, Client: Xiamen Air (Montreal, QC, Canada, May 15, 2018). Hof, L. A., Wüthrich, R. et Kwok, T.. 2018. « Industry 4.0 – what lies ahead for manufacturing in the Sector? ». Communication lors de la conférence : John Molson School of Business, John Molson Executive Centre & HEC Paris (Montreal, QC, Canada, May 10, 2018). Hof, Lucas A.. 2018. « Indirect additive manufacturing and multiscale post-processing for fabrication of complex, high precision metal parts ». Communication lors de la conférence : RAPID + TCT 2018 Event and Conference (Fort Worth, TX, USA, Apr. 23-26, 2018).
Hof, Lucas A., Singh, Deependra, Fallah, Panteha et Wüthrich, Rolf.
2018.
« High precision electrochemical manufacturing processes to meet the demand of Industry 4.0 ».
In 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2018) (Venice, Italy, June 04-08, 2018)
Euspen.
Hof, Lucas A. et Wuthrich, Rolf.
2018.
« Glass micro-cutting by Spark Assisted Chemical Engraving ».
In 2018 CSME International Congress (Toronto, ON, Canada, May 27-30, 2018)
CSME.
Hof, Lucas A. et Wuthrich, Rolf.
2018.
« Industry 4.0 Towards fabrication of mass-personalized parts on glass by Spark Assisted Chemical Engraving (SACE) ».
Manufacturing Letters, vol. 15.
pp. 76-80.
Hof, Lucas A. et Wüthrich, Rolf.
2018.
« Rapid prototyping of packaged glass devices: Eliminating a process step in the manufacturing workflow from micromachining to die singularizing ».
Manufacturing Letters, vol. 17.
pp. 9-13. Hof, Lucas Abia. 2018. « High-precision micro-machining of glass for mass-personalization ». Thèse de doctorat. Montreal, Concordia University
Hof, Lucas Abia et Wüthrich, Rolf.
2018.
« Electrochemical manufacturing to support industry 4.0 – Spark Assisted Chemical Engraving (SACE) ».
In Americas International Meeting on Electrochemistry and Solid State Science 2018 (AiMES 2018) (Cancun, Mexico, Sept. 30 - Oct. 04, 2018)
Electrochemical Society. Hof, Lucas Abia et Wüthrich, Rolf. 2018. « Electrochemical manufacturing to support industry 4.0 – Spark Assisted Chemical Engraving (SACE) ». Communication lors de la conférence : AiMES 2018 - ECS and SMEQ Joint International Meeting (Cancun, Mexico, Sept. 30-Oct. 4, 2018).
Honarparvar, Mohammad, de la Rosa, José M., Nabki, Frederic et Sawan, Mohamad.
2018.
« Design considerations of MASH ΔΣ modulators with GRO-based quantization ».
In 2018 IEEE International Symposium on Circuits and Systems (ISCAS) (Florence, Italy, May 27-30, 2018)
Piscataway, NJ, USA : IEEE. Horning, M., Blanchard, F., Isomura, A. et Yoshikawa, K.. 2018. « Spatiotemporal dynamics of line defects in cardiac tissue ». Communication lors de la conférence : EMBO/EMBL Symposium : Biological Oscillators: Design, Mechanism, Function (Heidelberg, Germany, June 3-5, 2018).
Hosni, Mohamed, Idri, Ali et Abran, Alain.
2018.
« Improved effort estimation of heterogeneous ensembles using filter feature selection ».
In Proceedings of the 13th International Conference on Software Technologies (ICSOFT 2018) (Porto, Portugal, July 26-28, 2018)
pp. 405-412.
SCITEPRESS.
Hosni, Mohamed, Idri, Ali, Abran, Alain et Nassif, Ali Bou.
2018.
« On the value of parameter tuning in heterogeneous ensembles effort estimation ».
Soft Computing, vol. 22, nº 18.
pp. 5977-6010.
Hua, Binh-Son, Gruson, Adrien, Zwicker, Matthias et Hachisuka, Toshiya.
2018.
« Light transport simulation in the gradient domain ».
In SIGGRAPH Asia Courses (Tokyo, Japan, Dec. 04-07, 2018)
Association for Computing Machinery, Inc.
Hudon, C., Amyot, N., Bernier, S., David, E. et Essalihi, M..
2018.
« Comparison of DC ramp and polarization and depolarisation tests on hydrogenerators ».
In 2018 IEEE Electrical Insulation Conference (EIC) (San Antonio, TX, USA, June 17-20, 2018)
pp. 114-119.
Piscataway, NJ, USA : IEEE.
Huh, Kyung In, Baraër, Michel, Mark, Bryan G. et Ahn, Yushin.
2018.
« Evaluating glacier volume changes since the little ice age maximum and consequences for stream flow by integrating models of glacier flow and hydrology in the Cordillera Blanca, Peruvian Andes ».
Water, vol. 10, nº 12.
Hui, E., Cunningham, N., Adoungotchodo, A. et Lerouge, S.. 2018. « Characterization of chitosan-collagen thermosensitive hydrogels for cell therapy and immunotherapy ». Affiche présentée lors de la conférence : 34th Annual Meeting of the Canadian Biomaterials Society (Victoria, BC, Canada, May 16-19, 2018). Hupin, Mathilde, Khadra, Christelle, Ballard, Ariane, Perreault, Isabelle, Fortin, Jean-Simon, Bouchard, Stephane, Noel, Melanie, Hoffman, Hunter, Dery, Johanne, Labbe, David, Paquin, David et Le May, Sylvie. 2018. « Decreasing recurrent pain and anxiety in medical procedures with a paediatric population: a pilot study ». Affiche présentée lors de la conférence : 39th SICOT Orthopaedic World Congress (Montreal, QC, Canada, Oct. 10-13, 2018).
Hussain, Afaq, Sher, Hadeed Ahmed, Murtaza, Ali Faisal et Al-Haddad, Kamal.
2018.
« Improved voltage controlled three phase voltage source inverter using model predictive control for standalone system ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 5308-5313.
Piscataway, NJ, USA : IEEE.
Ibarra-Zavaleta, Sara Patricia, Poulin, Annie, Castañeda-González, Mariana, Landgrave, Rosario, Romero-López, Rabindranarth et Ruelas Inzunza, Ernesto.
2018.
« Simulation of extreme hydrometeorological events under tropical conditions using a distributed hydrological model ».
In 13th International Conference on Hydroinformatics (HIC) (Palermo, Italy, July 01-06, 2018)
pp. 917-925.
Ibrahim, Charles, Mougharbel, imad, Abou Daher, Nivine, Kanaan, Hadi Y., Saad, Maarouf et Georges, Semaan.
2018.
« An optimal approach for offering multiple demand response programs over a power distribution network ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 95-102.
IEEE.
Idri, Ali, Abnane, Ibtissam et Abran, Alain.
2018.
« Evaluating Pred(p) and standardized accuracy criteria in software development effort estimation ».
Journal of Software: Evolution and Process, vol. 30, nº 4.
Idri, Ali, Abnane, Ibtissam et Abran, Alain.
2018.
« Support vector regression-based imputation in analogy-based software development effort estimation ».
Journal of Software: Evolution and Process, vol. 30, nº 12.
e2114.
Igntowicz, Kevin et Morency, François.
31 octobre 2018.
« Anticipating Risk of Ice Ingestion by Aircraft Engines ».
[Article de recherche]. Substance ÉTS.
Igntowicz, Kevin et Morency, François.
31 octobre 2018.
« Anticiper les risques d’ingestion de glace par les moteurs d’avion ».
[Article de recherche]. Substance ÉTS.
Ijaz, M. F., Zhukova, Y., Konopatsky, A., Dubinskiy, S., Korobkova, A., Pustov, Y., Brailovski, V. et Prokoshkin, S..
2018.
« Effect of Ta addition on the electrochemical behavior and functional fatigue life of metastable Ti-Zr-Nb based alloy for indwelling implant applications ».
Journal of Alloys and Compounds, vol. 748.
pp. 51-56.
Il, Alexandre, Chatelain, Jean-François, Lalonde, Jean-François, Balazinski, Marek et Rimpault, Xavier.
2018.
« An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling ».
International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4.
pp. 413-426. Iordanova, Ivanka. 2018. « What’s New in Construction Tech. ». Communication lors de la conférence : Canadian Construction Association 100th Annual Conference (Banff, AB, Canada, March 12-15, 2018).
Isman, Margaux, Archambault, Maude, Racette, Patricia, Konga, Charles Noel, Llaque, Roxana Miranda, Lin, David, Iha, Katsunori et Ouellet-Plamondon, Claudiane M..
2018.
« Ecological Footprint assessment for targeting climate change mitigation in cities: A case study of 15 Canadian cities according to census metropolitan areas ».
Journal of Cleaner Production, vol. 174.
pp. 1032-1043.
Issa, Mohamad, Fiset, Jean, Mobarra, Mohammadjavad, Ibrahim, Hussein et Ilinca, Adrian.
2018.
« Optimizing the performance of 500kW diesel generator: Impact of the eo-synchro on fuel consumption and greenhouse gas ».
Power Engineer, vol. 22, nº 2.
Izquierdo, Ricardo. 2018. « Printed sensors on flexible substrates for biomedical applications ». Communication lors de la conférence : 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (Honolulu, HI, USA, July 17-21, 2018). Izquierdo, Ricardo. 2018. « Toward green printing of organic solar cells ». Communication lors de la conférence : EMP18 International Conference on Energy, Materials and Photonics (Montreal, QC, Canada, July 08-11, 2018).
Jaafar, Wael, Ajib, Wessam et Elbiaze, Halima.
2018.
« Joint caching and resource allocation in D2D-assisted heterogeneous networks ».
In 14th International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob) (Limassol, Cyprus, Oct. 15-17, 2018)
IEEE Computer Society.
Jabbarzadeh, Armin, Fahimnia, Behnam et Sabouhi, Fatemeh.
2018.
« Resilient and sustainable supply chain design: Sustainability analysis under disruption risks ».
International Journal of Production Research, vol. 56, nº 17.
pp. 5945-5968.
Jabbarzadeh, Armin, Haughton, Michael et Khosrojerdi, Amir.
2018.
« Closed-loop supply chain network design under disruption risks: A robust approach with real world application ».
Computers and Industrial Engineering, vol. 116.
pp. 178-191. Jabbarzadeh, Armin, Verma, M. et Azad, N.. 2018. « Railroad transportation planning of hazardous materials in the presence of random disruptions ». Communication lors de la conférence : 60th Annual Canadian Operational Research Society Conference (Halifax, NS, Canada, June 04-06, 2018).
Jacobsen, Hans-Arno, Sadoghi, Mohammad, Tabatabaei, Mohammad Hossein, Vitenberg, Roman et Zhang, Kaiwen.
2018.
« Blockchain landscape and AI renaissance: The bright path forward ».
In Proceedings of the 19th International Middleware Conference Tutorials (Rennes, France, Dec. 10-14, 2018)
ACM. Jamali, Mohammadreza, Coulombe, Stephane et Caron, Francois (inventeurs) 27 novembre 2018. « Method and system for fast mode decision for high efficiency video coding ». École de technologie supérieure (titulaire(s)). Brevet américain US 10,142,626.
Jameel, Furqan, Wyne, Shurjeel, Jayakody, Dushantaha Nalin K., Kaddoum, Georges et O'Kennedy, Richard.
2018.
« Wireless social networks: A survey of recent advances, applications and challenges ».
[Article scientifique]. IEEE Access, vol. 6.
pp. 59589-59617.
Javadi, Alireza, Arabsalmanabadi, Bita, Al-Haddad, Kamal et Hicar, Marek.
2018.
« A three-phase THSeAF based on packed U-Cell and P+R controller to improve power quality of MEA ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 20-23, 2018)
pp. 5725-5730.
Institute of Electrical and Electronics Engineers Inc..
Javadi, Alireza, Fu, Xiaofan, Hamadi, Abdelhamid et Al-Haddad, Kamal.
2018.
« A hybrid series active filter using single-phase low rating packed u-cell converter ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 3597-3602.
IEEE.
Javadi, Alireza, Woodward, Lyne et Al-Haddad, Kamal.
2018.
« Real-time implementation of a three-phase THSeAF Based on VSC and P+R controller to improve power quality of weak distribution systems ».
IEEE Transactions on Power Electronics, vol. 33, nº 3.
pp. 2073-2082.
Javadi, Hamid, Jomaa, Walid, Dalgaard, Elvi, Brochu, Myriam et Bocher, Philippe.
2018.
« Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy ».
In 12th International Fatigue Congress (FATIGUE 2018) (Poitiers, France, May 27-June 1, 2018)
Coll. « MATEC Web of Conferences », vol. 165.
EDP Sciences.
Jbira, Ibtissem, Tahan, Antoine, Mahjoub, Mohammed Ali et Louhichi, Borhen.
2018.
« Evaluation of the algorithmic error of new specification tools for an ISO 14405-1:2016 size ».
In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Québec, QC, Canada, Aug. 26-29, 2018)
Jeandel, S., Aissaoui, R., Choinière, M., Pontbriand, R., Fuentes, A. et Hagemeister, N.. 2018. « Development of a method to detect the impact of pain relief on muscle activity in knee osteoarthriticpatients: preliminary results ». Communication lors de la conférence : XXII International Society of Electrophysiology and Kinesiology Congress (Dublin, Ireland, June 30-July 02, 2018).
Jebali, Chokri et Kouki, Ammar.
2018.
« A proposed prototype for cattle monitoring system using RFID ».
In 2018 International Flexible Electronics Technology Conference (Ottawa, ON, Canada, Aug. 7-9, 2018)
Piscataway, NJ, USA : IEEE.
Jebali, Chokri et Kouki, Ammar.
2018.
« Thermal effects analysis of GaN HEMT power amplifier based on LTCC substrate integration ».
In 2018 IEEE Canadian Conference on Electrical & Computer Engineering (CCECE) (Québec, QC, Canada, May 13-16, 2018)
Piscataway, NJ, USA : IEEE.
Jebali, Chokri et Kouki, Ammar B..
2018.
« Read range/rate improvement of LF RFID-based tracking systems ».
IEEE Journal of Radio Frequency Identification, vol. 2, nº 2.
pp. 73-79.
Jergler, Martin, Zhang, Kaiwen et Jacobsen, Hans-Arno.
2018.
« Multi-client transactions in distributed publish/subscribe systems ».
In 2018 IEEE 38th International Conference on Distributed Computing Systems (ICDCS) (Vienna, Austria, July 2-6, 2018)
pp. 120-131.
IEEE.
Jetté, Bruno, Brailovski, Vladimir, Dumas, Mathieu, Simoneau, Charles et Terriault, Patrick.
2018.
« Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 77.
pp. 58-72.
Jetté, Bruno, Brailovski, Vladimir, Simoneau, Charles, Dumas, Mathieu et Terriault, Patrick.
2018.
« Development and in vitro validation of a simplified numerical model for the design of a biomimetic femoral stem ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 77.
pp. 539-550.
Jobidon, Gabriel, Lemieux, Pierre et Beauregard, Robert.
2018.
« Implementation of integrated project delivery in Quebec's procurement for public infrastructure: A comparative and relational perspective ».
Sustainability, vol. 10, nº 8.
Jolicoeur, Pierre, Lina, Jean-Marc, Drisdelle, Brandi Lee, Koch, Iring, Collard, Guillaume, Eben, Charlotte et Nolden, Sophie.
2018.
« Mechanisms of attentional control in switching foveal and peripheral foci: Evidence from erps and phase synchrony ».
[Article de conférence]. Psychophysiology, vol. 55, nº Suppl. 1.
S12.
Jolliet, Olivier, Antón, Assumpció, Boulay, Anne-Marie, Cherubini, Francesco, Fantke, Peter, Levasseur, Annie, McKone, Thomas E., Michelsen, Ottar, Milà I Canals, Llorenç, Motoshita, Masaharu, Pfister, Stephan, Verones, Francesca, Vigon, Bruce et Frischknecht, Rolf.
2018.
« Global guidance on environmental life cycle impact assessment indicators: impacts of climate change, fine particulate matter formation, water consumption and land use ».
International Journal of Life Cycle Assessment, vol. 23, nº 11.
pp. 2189-2207.
Juliao, M. L. et Melhado, S. B..
2018.
« Importância de modelos de contratação de projetos corporativos: estudo de caso ».
In XVII Encontro Nacional de Tecnologia do Ambiente Construído (ENTAC) (Foz do Iguaçu, Brésil, Nov. 12-14, 2018)
pp. 1435-1441.
Porte Alegre : ANTAC.
Juliao, Mariana et Melhado, Silvio.
2018.
« The relevance of scope of work in corporate office projects – case studies ».
In The Twelfth Built Environment Conference (Durban, South Africa, Aug. 06-07, 2018)
pp. 548-560.
Association of Schools of Construction of Southern Africa. Jung, In-Ho, Van Ende, M.-A., Dong-Geun, Km, Moosavi-Khoonsari, E. et Tai, Minami. 2018. « Thermodynamic database for the slag and refractory system in the coal combustion process ». Communication lors de la conférence : 14th International Ceramics Congress (CIMTECH) (Perugia, Italy, June 04-08, 2018).
Ka, Ibrahima, Asuo, Ivy M., Basu, Suchismita, Fourmont, Paul, Gedamu, Dawit M., Pignolet, Alain, Cloutier, Sylvain G. et Nechache, Riad.
2018.
« Hysteresis-Free 1D network mixed halide-perovskite semitransparent solar cells ».
Small, vol. 14, nº 38.
Ka, Ibrahima, Gerlein, Luis F., Asuo, Ivy M., Nechache, Riad et Cloutier, Sylvain G..
2018.
« An ultra-broadband perovskite-PbS quantum dot sensitized carbon nanotube photodetector ».
Nanoscale, vol. 10, nº 19.
pp. 9044-9052.
Kali, Y., Rodas, J., Ayala, M., Saad, M., Gregor, R., Benjelloun, K., Doval-Gandoy, J. et Goodwin, G..
2018.
« Discrete-time sliding mode with time delay estimation of a six-phase induction motor drive ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 5807-5812.
IEEE.
Kali, Y., Rodas, J., Saad, M., Grezor, R., Benielloun, K., Doval-Gandov, J. et Goodwin, G..
2018.
« Speed control of a five-phase induction motor drive using modified super-twisting algorithm ».
In 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) (Amalfi, Italy, June 20-22, 2016)
pp. 938-943.
Piscataway, NJ, USA : IEEE.
Kali, Yassine, Rodas, Jorge, Gregor, Raul, Saad, Maarouf et Benjelloun, Khalid.
2018.
« Attitude tracking of a tri-rotor uav based on robust sliding mode with time delay estimation ».
In 2018 International Conference on Unmanned Aircraft Systems (ICUAS) (Dallas, TX, USA, June 12-15, 2018)
pp. 346-351.
Piscataway, NJ, USA : IEEE.
Kali, Yassine, Rodas, Jorge, Saad, Maarouf, Benjelloun, Khalid, Ayala, Magno et Gregor, Raul.
2018.
« Finite-time altitude and attitude tracking of a Tri-Rotor UAV using modified super-twisting second order sliding mode ».
In ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics (Porto, Portugal, July 29-31, 2018)
pp. 435-442.
SciTePress.
Kali, Yassine, Saad, Maarouf et Benjelloun, Khalid.
2018.
« Optimal super-twisting algorithm with time delay estimation for robot manipulators based on feedback linearization ».
Robotics and Autonomous Systems, vol. 108.
pp. 87-99.
Kali, Yassine, Saad, Maarouf, Benjelloun, Khalid et Khairallah, Charles.
2018.
« Super-twisting algorithm with time delay estimation for uncertain robot manipulators ».
Nonlinear Dynamics, vol. 93, nº 2.
pp. 557-569.
Kamali, Kaveh, Joubair, Ahmed et Bonev, Ilian A..
2018.
« Optimizing cable arrangement in cable-driven parallel robots to improve the range of available wrenches ».
In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Quebec, QC, Canada, Aug. 26-29, 2018)
ASME.
Kammegne, Michel Joel Tchatchueng, Tondji, Yvan, Botez, Ruxandra Mihaela, Grigorie, Lucian Teodor, Mamou, Mahmoud et Mébarki, Youssef.
2018.
« New control methodology for a morphing wing demonstrator ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 232, nº 8.
pp. 1479-1494.
Kanso, Ali, Gherbi, Abdelouahed et Lemieux, Yves.
2018.
« Middleware-managed high availability for cloud applications ».
International Journal of Information and Communication Technology, vol. 12, nº 1-2.
pp. 186-208.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2018.
« Influence of thermal ratcheting on the creep and mechanical properties of High Density Polyethylene (HDPE) ».
In ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018)
ASME.
Kanthabhabha Jeya, Rahul et Bouzid, Abdel-Hakim.
2018.
« Compression creep and thermal ratcheting behavior of High Density Polyethylene (HDPE) ».
Polymers, vol. 10, nº 2.
Karabibene, N., Chatelain, J-F., Beauchamp, Y. et Lebrun, G..
2018.
« Effect of machining parameters on the quality of a flax fiber reinforced polymer composite ».
In International Conference on Industry, Engineering, and Management Systems (IEMS 2018) (Cocoa Beach, FL, USA, Mar. 19-21, 2018)
Karabibene, N., Chatelain, J-F., Beauchamp, Y. et Lebrun, G..
2018.
« Effect of machining parameters on the uncut fibers of a unidirectional flax fiber reinforced composite ».
Journal of Management and Engineering Integration, vol. 11, nº 1.
Karimi, Elham, Ménard, Lucie et Laporte, Catherine. 2018. « Fully-automated tongue detection in ultrasound images ». Affiche présentée lors de la conférence : 176th Meeting of the Acoustical Society of America and 2018 Acoustics Week in Canada (Victoria, BC, Canada, Nov. 05-09, 2018).
Kaur, Kujeet, Kumar, Neeraj, Garg, Sahil et Rodrigues, Joel J. P. C..
2018.
« EnLoc: Data locality-aware energy-efficient scheduling scheme for cloud data centers ».
In IEEE International Conference on Communications (ICC) (Kansas City, MO, USA, May 20-24, 2018)
IEEE.
Kaur, Kujeet, Kumar, Neeraj, Garg, Sahil et Zomaya, Albert Y..
2018.
« A game of incentives: An efficient demand response mechanism using fleet of electric vehicles ».
In 1st ACM International Workshop on Future Industrial Communication Networks (FICN) (New Delhi, Inde, Nov. 02, 2018)
pp. 27-32.
Association for Computing Machinery.
Kaur, Kuljeet, Garg, Sahil, Aujla, Gagangeet Singh, Kumar, Neeraj, Rodrigues, Joel J. P. C. et Guizani, Mohsen.
2018.
« Edge computing in the industrial internet of things environment: Software-defined-networks-based edge-cloud interplay ».
IEEE Communications Magazine, vol. 56, nº 2.
pp. 44-51.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2018.
« Leak prediction through porous compressed packing rings: A comparison study ».
International Journal of Pressure Vessels and Piping, vol. 166.
pp. 1-8.
Ke, Xiao, Shaowei, Zhang, Kadoch, Michel et Chen, Li.
2018.
« Study of physical layer security in mmWave satellite networks ».
In IEEE International Conference on Communications (ICC 2018) (Kansas City, MO, USA, May 20-24, 2018)
Piscataway, NJ, USA : IEEE.
Kebir, Anouer, Woodward, Lyne et Akhrif, Ouassima.
2018.
« Extremum-seeking control with adaptive excitation: application to a photovoltaic system ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 3.
pp. 2507-2517.
Kebir, Gul Filiz Tchoketch, Larbes, Cherif, Ilinca, Adrian, Obeidi, Thameur et Kebir, Selma Tchoketch.
2018.
« Study of the intelligent behavior of a maximum photovoltaic energy tracking fuzzy controller ».
Energies, vol. 11, nº 12.
Kedadouche, Mourad, Liu, Zhaoheng et Thomas, Marc.
2018.
« Bearing fault feature extraction using autoregressive coefficients, linear discriminant analysis and support vector machine under variable operating conditions ».
In Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the 5th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2016, 12–16 September 2016, Gliwice, Poland (Gliwice, Poland, Sept. 12-16, 2016)
Coll. « Applied Condition Monitoring », vol. 9.
pp. 339-352.
Springer.
Kedadouche, Mourad, Liu, Zhaoheng et Thomas, Marc.
2018.
« Bearing fault feature extraction using autoregressive coefficients, linear discriminant analysis and support vector machine under variable operating conditions ».
In
Advances in Condition Monitoring of Machinery in Non-Stationary Operations.
Coll. « Applied Condition Monitoring », vol. 9.
pp. 339-352. Springer.
Kedadouche, Mourad, Yulan, Sun, Liu, Zhaoheng, Thomas, Marc, Charland-Arcand, Guillaume et Beck, Adrien.
2018.
« Design of a vibration isolator for the inertial navigation system of an autopilot dedicated to the operation of light drones ».
In 2018 9th International Conference on Mechanical and Aerospace Engineering (ICMAE) (Budapest, Hungary, Jul. 10-13, 2018)
pp. 73-78.
IEEE.
Kelly, S., Jahanshad, N., Zalesky, A., Kochunov, P., Agartz, I., Alloza, C., Andreassen, O. A., Arango, C., Banaj, N., Bouix, S., Bousman, C. A., Brouwer, R. M., Bruggemann, J., Bustillo, J., Cahn, W., Calhoun, V., Cannon, D., Carr, V., Catts, S., Chen, J., Chen, J. X., Chen, X., Chiapponi, C., Cho, K. K., Ciullo, V., Corvin, A. S., Crespo-Facorro, B., Cropley, V., De Rossi, P., Diaz-Caneja, C. M., Dickie, E. W., Ehrlich, S., Fan, F. M., Faskowitz, J., Fatouros-Bergman, H., Flyckt, L., Ford, J. M., Fouche, J. P., Fukunaga, M., Gill, M., Glahn, D. C., Gollub, R., Goudzwaard, E. D., Guo, H., Gur, R. E., Gur, R. C., Gurholt, T. P., Hashimoto, R., Hatton, S. N., Henskens, F. A., Hibar, D. P., Hickie, I. B., Hong, L. E., Horacek, J., Howells, F. M., Hulshoff Pol, H. E., Hyde, C. L., Isaev, D., Jablensky, A., Jansen, P. R., Janssen, J., Jönsson, E. G., Jung, L. A., Kahn, R. S., Kikinis, Z., Liu, K., Klauser, P., Knöchel, C., Kubicki, M., Lagopoulos, J., Langen, C., Lawrie, S., Lenroot, R. K., Lim, K. O., Lopez-Jaramillo, C., Lyall, A., Magnotta, V., Mandl, R. C. W., Mathalon, D. H., McCarley, R. W., McCarthy-Jones, S., McDonald, C., McEwen, S., McIntosh, A., Melicher, T., Mesholam-Gately, R. I., Michie, P. T., Mowry, B., Mueller, B. A., Newell, D. T., O'Donnell, P., Oertel-Knöchel, V., Oestreich, L., Paciga, S. A., Pantelis, C., Pasternak, O., Pearlson, G., Pellicano, G. R., Pereira, A. et Pineda Zapata et al., J..
2018.
« Widespread white matter microstructural differences in schizophrenia across 4322 individuals: Results from the ENIGMA Schizophrenia DTI Working Group ».
Molecular Psychiatry, vol. 23, nº 5.
pp. 1261-1269.
Kervadec, Hoel, Dolz, Jose, Tang, Meng, Granger, Éric, Boykov, Yuri et Ben Ayed, Ismail.
2018.
« Constrained-CNN losses for weakly supervised segmentation ».
In 1st Conference on Medical Imaging with Deep Learning (MIDL 2018) (Amsterdam, Netherlands, July 4-6, 2018)
Keyhanian, Aliasghar, Lambadaris, Ioannis, Leivadeas, Aris et Marmokos, Ioannis.
2018.
« Analyzing the coexistence of Wi-Fi and LAA-LTE towards a proportional throughput fairness ».
In MobiWac 2018 - Proceedings of the 16th ACM International Symposium on Mobility Management and Wireless Access (Montreal, QC, Canada, Oct. 28 - Nov. 2, 2018)
pp. 95-101.
Association for Computing Machinery, Inc.
Khadra, Christelle, Ballard, Ariane, Déry, Johanne, Paquin, David, Fortin, Jean-Simon, Perreault, Isabelle, Labbé, David R., Hoffman, Hunter G., Bouchard, Stéphane et LeMay, Sylvie.
2018.
« Projector-based virtual reality dome environment for procedural pain and anxiety in young children with burn injuries: A pilot study ».
Journal of Pain Research, vol. 11.
pp. 343-353.
Khan, Sharfuddin Ahmed, Chaabane, Amin et Dweiri, Fikri T..
2018.
« Multi-criteria decision-making methods application in supply chain management: a systematic literature review ».
In
Multi-criteria methods and techniques applied to supply chain management.
IntechOpen.
Khanjarpanah, Hossein, Jabbarzadeh, Armin et Seyedhosseini, Seyed Mohammad.
2018.
« A novel multi-period double frontier network DEA to sustainable location optimization of hybrid wind-photovoltaic power plant with real application ».
Energy Conversion and Management, vol. 159.
pp. 175-188. Khare, Shweta, Hongyang, Sun, Zhang, Kaiwen, Gascon-Samson, Julien, Gokhale, Aniruddha et Koutsoukos, Xenofon. 2018. « Ensuring low-latency and scalable data dissemination for smart-city applications ». Affiche présentée lors de la conférence : 2018 IEEE/ACM Third International Conference on Internet-of-Things Design and Implementation (IoTDI) (Orlando, FL, USA, Apr. 17-20, 2018).
Khare, Shweta, Sun, Hongyang, Zhang, Kaiwen, Gascon-Samson, Julien, Gokhale, Aniruddha, Koutsoukos, Xenofon et Abdelaziz, Hamzah.
2018.
« Scalable edge computing for low latency data dissemination in topic-based publish/subscribe ».
In 2018 IEEE/ACM Symposium on Edge Computing (SEC) (Seattle, WA, USA, Oct. 25-27, 2018)
pp. 214-227.
IEEE.
Khasawneh, Samer et Kadoch, Michel.
2018.
« Hybrid cryptography algorithm with precomputation for advanced metering infrastructure networks ».
Mobile Networks and Applications, vol. 23, nº 4.
pp. 982-993. Khawja, S., Ernst, R.E. et Samson, C.. 2018. « Mapping and interpretation of structural within tessera regions on Venus ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Mar. 23-25, 2018).
Khay, M., Ngo, A. D. et Ganesan, R..
2018.
« Experimental investigation and phenomenological modeling of hygrothermal effect on tensile fatigue behavior of carbon/epoxy plain weave laminates ».
Journal of Composite Materials, vol. 52, nº 27.
pp. 3803-3818.
Khebir, Ahmed, Dłotko, Pawel, Kapidani, Bernard, Kouki, Ammar et Specogna, Ruben.
2018.
« T-Ω Formulation with higher-order hierarchical basis functions for nonsimply connected conductors ».
Mathematical Problems in Engineering, vol. 2018.
Khodaei, Hamid et Terriault, Patrick.
2018.
« Experimental validation of shape memory material model implemented in commercial finite element software under multiaxial loading ».
Journal of Intelligent Material Systems and Structures, vol. 29, nº 14.
pp. 2954-2965. Khoshkava, Vahid, Lévesque, Vincent et Cruz-Hernandez, Juan Manuel (inventeurs) 23 janvier 2018. « Systems and methods for multifunction haptic output devices ». Immersion Corporation (titulaire(s)). Brevet américain US 9,875,625. Khoshkava, Vahid, Lévesque, Vincent, Cruz-Hernandez, Juan Manuel, Alghooneh, Mansoor et Rihn, William (inventeurs) 5 juin 2018. « Systems and methods for position-based haptic effects ». Immersion Corporation (titulaire(s)). Brevet américain US 9,990,078. Khoshkava, Vahid, Lévesque, Vincent, Saboune, Jamal, Hamam, Abdelwahab, Cruz-Hernandez, Juan Manuel et Wu, Liwen (inventeurs) 20 février 2018. « Systems and methods for haptic surface elements ». Immersion Corporation (titulaire(s)). Brevet américain US 9,898,903.
Khreich, Wael, Murtaza, Syed Shariyar, Hamou-Lhadj, Abdelwahab et Talhi, Chamseddine.
2018.
« Combining heterogeneous anomaly detectors for improved software security ».
Journal of Systems and Software, vol. 137.
pp. 415-429.
Kibouka, Guy Richard, Nganga-Kouya, Donatien, Kenné, Jean-Pierre, Polotski, Vladimir et Songmene, Victor.
2018.
« Maintenance and setup planning in manufacturing systems under uncertainties ».
Journal of Quality in Maintenance Engineering, vol. 24, nº 2.
pp. 170-184.
Kilani, Moez Ben, Gagnon, Ghyslain et Gagnon, François.
2018.
« Multistatic radar placement optimization for cooperative radar-communication systems ».
IEEE Communications Letters, vol. 22, nº 8.
pp. 1576-1579.
Kim, Dong-Geun, Moosavi-Khoonsari, Elmira et Jung, In-Ho.
2018.
« Thermodynamic modeling of the K2O-Al2O3 and K2O-MgO-Al2O3 systems with emphasis on β- and βʹʹ-aluminas ».
Journal of the European Ceramic Society, vol. 38, nº 9.
pp. 3188-3200.
Kim, Soojung, Bhat, Achintya, Poirier, Erik A. et Staub-French, Sheryl.
2018.
« Investigating owner requirements for BIM-enabled design review ».
In Construction Research Congress : Construction Information Technology - Selected Papers from the Construction Research Congress 2018 (New Orleans, LA, USA, April 2-4, 2018)
pp. 581-590.
American Society of Civil Engineers (ASCE).
Kiskani, Moshen Karimzadeh, Vakilinia, Shahin et Cheriet, Mohamed.
2018.
« Popularity based file categorization and coded caching in 5G networks ».
In IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 08-13, 2017)
IEEE.
Klotoé, Cédric Hounyevou, Duhaime, François et Guizani, Lotfi.
2018.
« Thermal and hydraulic modelling of road tunnel joints ».
In COMSOL Conference (Boston, MA, USA, Oct. 3-5, 2019)
COMSOL.
Klotz, T., Delbergue, D., Bocher, P., Levesque, M. et Brochu, M..
2018.
« Surface characteristics and fatigue behavior of shot peened Inconel 718 ».
International Journal of Fatigue, vol. 110.
pp. 10-21. Kohler, Arthur, Saint-Pierre Côté, Sara, Charbonneau, Philippe, Aissaoui, Rachid et Labbé, David. 2018. « Validation d'un égo-avatar virtuel modulable pour modifier les paramètres spatio-temporels de la marche ». Affiche présentée lors de la conférence : Journée Scientifique REPAR-INTER 2018 (Québec, QC, Canada, 11 mai 2018).
Kokoko, Olivier, Merkhouf, Arezki, Tounzi, Abdelmounaim, Essalhi, Mounir, Guillot, Eilin, Kedjar, Bachir et Al Haddad, Kamal.
2018.
« Detection of short circuits in the rotor field winding in large hydro generator ».
In 2018 XIII International Conference on Electrical Machines (ICEM) (Alexandroupoli, Greece, Sept. 03-06, 2018)
pp. 1815-1820.
Piscataway, NJ, USA : IEEE.
Kollment, Werner, O'Leary, Paul, Harker, Matthew, Klunsner, Thomas et Eck, Sven.
2018.
« Force and acoustic emission measurements for condition monitoring of fine blanking tools ».
In IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement (Houston, TX, USA, May 14-17, 2018)
Institute of Electrical and Electronics Engineers.
Kolobova, A. Yu, Ryklina, E. P., Prokoshkin, S. D., Inaekyan, K. E. et Brailovskii, V..
2018.
« Study of the evolution of the structure and kinetics of martensitic transformations in a titanium nickelide upon isothermal annealing after hot helical rolling ».
Physics of Metals and Metallography, vol. 119, nº 2.
pp. 134-145.
Kong, Long et Kaddoum, Georges.
2018.
« On physical layer security over the fisher-snedecor f wiretap fading channels ».
IEEE Access, vol. 6.
pp. 39466-39472.
Kong, Long, Kaddoum, Georges et da Costa, Daniel Benevides.
2018.
« Cascaded α-μ : Fading channels: Reliability and security analysis ».
IEEE Access, vol. 6.
pp. 41978-41992.
Kong, Long, Kaddoum, Georges, Da Costa, Daniel Benevides et Bou-Harb, Elias.
2018.
« On secrecy bounds of MIMO wiretap channels with ZF detectors ».
In 14th International Wireless Communications and Mobile Computing Conference (IWCMC 2018) (Limassol, Cyprus, June 25-29, 2018)
pp. 724-729.
IEEE.
Kong, Long, Kaddoum, Georges et Rezki, Zouheir.
2018.
« Highly accurate and asymptotic analysis on the SOP over SIMO α-μ fading channels ».
IEEE Communications Letters, vol. 22, nº 10.
pp. 2088-2091.
Kong, Long, Kaddoum, Georges et Vuppala, Satyanarayana.
2018.
« On secrecy analysis for D2D networks over alpha- fading channels with randomly distributed eavesdroppers ».
In IEEE International Conference on Communications Workshops (ICC Workshops 2018) (Kansas City, MO, USA, May 20-24, 2018)
Institute of Electrical and Electronics Engineers Inc..
Kong, Long, Vuppala, Satyanarayana et Kaddoum, Georges.
2018.
« Secrecy analysis of random MIMO wireless networks over α-μ fading channels ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 12.
pp. 11654-11666.
Konishi, J., del Re, E. C., Bouix, S., Blokland, G. A. M., Mesholam-Gately, R., Woodberry, K., Niznikiewicz, M., Goldstein, J., Hirayasu, Y., Petryshen, T. L., Seidman, L. J., Shenton, M. E. et McCarley, R. W..
2018.
« Abnormal relationships between local and global brain measures in subjects at clinical high risk for psychosis: A pilot study ».
Brain Imaging and Behavior, vol. 12, nº 4.
pp. 974-988.
Kreitcberg, A., Brailovski, V. et Prokoshkin, S..
2018.
« New biocompatible near-beta Ti-Zr-Nb alloy processed by laser powder bed fusion: Process optimization ».
Journal of Materials Processing Technology, vol. 252.
pp. 821-829.
Kuate-Togue, H., Chatelain, J-F. et Ouellet-Plamondon, C..
2018.
« Effect of additives on cutting temperature of glass fibers reinforced polymers ».
In Proceedings of The Canadian Society for Mechanical Engineering International Congress (CSME) (Toronto, ON, Canada, May 27-30, 2018)
CSME.
Kuester, Scheyla, Barra, Guilherme M. O. et Demarquette, Nicole R..
2018.
« Morphology, mechanical properties and electromagnetic shielding effectiveness of poly(styrene-b-ethylene-ran-butylene-b-styrene)/carbon nanotube nanocomposites: effects of maleic anhydride, carbon nanotube loading and processing method ».
Polymer International, vol. 67, nº 9.
pp. 1229-1240.
Kula, Raula Gaikovina, German, Daniel M., Ouni, Ali, Ishio, Takashi et Inoue, Katsuro.
2018.
« Do developers update their library dependencies?: An empirical study on the impact of security advisories on library migration ».
Empirical Software Engineering, vol. 23, nº 1.
pp. 384-417.
Kula, Raula Gaikovina, Ouni, Ali, German, Daniel M. et Inoue, Katsuro.
2018.
« An empirical study on the impact of refactoring activities on evolving client-used APIs ».
Information and Software Technology, vol. 93.
pp. 186-199.
Kumar, Kuldeep, Chauvin, Laurent, Toews, Matthew, Colliot, Olivier et Desrosiers, Christian.
2018.
« Multi-modal analysis of genetically-related subjects using SIFT descriptors in brain MRI ».
In Computational Diffusion MRI : MICCAI Workshop, Québec, Canada, September 2017 (Québec, QC, Canada, 10 sept. 2017)
Coll. « Mathematics and Visualization »
pp. 219-228.
Springer International Publishing.
Kumar, Kuldeep, Toews, Matthew, Chauvin, Laurent, Colliot, Olivier et Desrosiers, Christian.
2018.
« Multi-modal brain fingerprinting: A manifold approximation based framework ».
NeuroImage, vol. 183.
pp. 212-226.
Kurusu, R., Helal, E., Demarquette, N., David, E. et Moghimian, N..
2018.
« Electrical properties of EVA/LLDPE blends with selectively located graphene nanoplatelets ».
In IEEE 2nd International Conference on Dielectrics (Budapest, Hungary, July 1-5, 2018)
New York : IEEE.
Kurusu, Rafael S., Helal, Emna, Moghimian, Nima, David, Eric et Demarquette, Nicole.
2018.
« The role of selectively located commercial graphene nanoplatelets in the electrical properties, morphology, and stability of EVA/LLDPE blends ».
Macromolecular Materials and Engineering, vol. 303, nº 9.
Kwiatkowski, Jennifer, Roberge, Jean-Philippe, Nadeau, Nicholas A., L'Écuyer-Lapierre, Louis et Duchaine, Vincent.
2018.
« An extrinsic dexterity approach to the IROS 2018 fan robotic challenge ».
In 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Madrid, Spain, Oct. 1-5, 2018)
pp. 4139-4144.
Piscataway, NJ, USA : IEEE.
Laaouatni, Amine, Martaj, Nadia, Bennacer, Rachid, El Omari, Mohamed, Bin, Liu, El Ganaoui, Mohammed et Merabtine, Abdelatif.
2018.
« Integration of the PCM with intra-ventilation for improved thermal and inertial characteristics of the building envelope ».
EPJ Applied Physics, vol. 84, nº 3.
Labbé, David R.. 2018. « L’incarnation d’avatars virtuel en réadaptation ». Communication lors de la conférence : Innove-Action, Centre de recherche du CHUM (Montréal, QC, Canada, nov. 2018). Labbé, David R.. 2018. « L’incarnation d’égo-avatars : une innovation technologique prometteuse pour la réadaptation? ». Communication lors de la conférence : Journée de la recherche de l’École de réadaptation de l’Université de Montréal (Montréal, QC, Canada, juin 2018). Lachance-Tremblay, Éric. 2018. « Caractérisation du grade PG des liants provenant du GBR : Formulation des enrobés HR ». Communication lors de la conférence : Formation Technique de Bitume Québec (Québec, QC, Canada, 5-6 déc. 2018). Lachance-Tremblay, Éric. 2018. « Sensibilité à l’eau et résistance au gel-dégel des enrobés bitumineux avec granulats de verre recyclé ». Thèse de doctorat. Montréal, École de technologie supérieure
Lachance-Tremblay, Eric, Perraton, Daniel, Vaillancourt, Michel et Di Benedetto, Herve.
2018.
« Effect of hydrated lime on linear viscoelastic properties of asphalt mixtures with glass aggregates subjected to freeze-thaw cycles ».
Construction and Building Materials, vol. 184.
pp. 58-67. Lachance-Tremblay, Éric, Perraton, Daniel, Vaillancourt, Michel et Di Benedetto, Herve. 2018. « LVE properties of asphalt mixtures with glass aggregates subjected to water exposure and freeze-thaw cycles ». Affiche présentée lors de la conférence : 2018 International Society for Asphalt Pavements (ISAP) Conference (Fortaleza, Ceara, Brazil, June 19-21, 2018). Lacroix, Robert et Lévesque, Vincent (inventeurs) 30 janvier 2018. « Friction modulation for three dimensional relief in a haptic device ». Immersion Corporation (titulaire(s)). Brevet américain US 9,880,623.
Lafioune, Nawel et St-Jacques, Michèle.
2018.
« L'apport du BIM à la gestion des infrastructures urbaines au Québec ».
In 24e édition INFRA (Québec, QC, Canada, 19-21 nov. 2018)
Lala, Prasun, Langevin Harnois, Félix, El Boussaidi, Ghizlane, Desrosiers, Christian et Laporte, Catherine.
2018.
« Providing sustainable scientific writing support for graduate engineering students by creating a local scientific learning community ».
In 2018 ASEE Annual Conference & Exposition (Salt Lake City, UT, USA, June 24-27, 2018)
American Society for Engineering Education. Lala, Prasun, Langevin Harnois, Félix, El Boussaidi, Ghizlane, Desrosiers, Christian et Laporte, Catherine. 2018. « Providing sustainable scientific writing support for graduate engineering students by creating a local scientific learning community ». Communication lors de la conférence : 2018 ASEE Annual Conference & Exposition (Salt Lake City, UT, USA, June 24-27, 2018).
Lalonde, Sébastien, Guilbault, Raynald et Langlois, Sébastien.
2018.
« Numerical analysis of ACSR conductor-clamp systems undergoing wind-induced cyclic loads ».
IEEE Transactions on Power Delivery, vol. 33, nº 4.
pp. 1518-1526.
Lamalice, Annie, Haillot, Didier, Lamontagne, Marc-André, Herrmann, Thora Martina, Gibout, Stéphane, Blangy, Sylvie, Martin, Jean-Louis, Coxam, Véronique, Arsenault, Julien, Munro, Lara et Courchesne, François.
2018.
« Building food security in the canadian arctic through the development of sustainable community greenhouses and gardening ».
Écoscience, vol. 25, nº 4.
pp. 325-341. Lamarche, Louis. 2018. « Développements récents sur la modélisation des échangeurs géothermiques horizontaux ». Affiche numéro 63 présentée lors de la conférence : Congrès Annuel de la Société Française de Thermique (SFT) (Pau, France, 29 mai-1er juin 2018).
Lamarche, Louis, Raymond, Jasmin et Koubikana Pambou, Claude.
2018.
« Evaluation of the internal and borehole resistances during thermal response tests and impact on ground heat exchanger design ».
Energies, vol. 11, nº 1.
Landau, Kurt, Nadeau, Sylvie, Le Floch, Tiphaine et Morency, François.
2018.
« Arbeitsprozesse und Wertschöpfungsbeiträge bei der Flugzeug-Enteisung ».
In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64.
GFA Press.
Landau, Kurt, Nadeau, Sylvie et LeFloch, Tiphaine.
2018.
« Development of the Ergonomic Activity Sampling (EAS) method to analyse video-documented work processes with activity sampling ».
Ergonomics International Journal, vol. 2, nº 4.
Langenfeld, Florent, Axenopoulos, Apostolos, Chatzitofis, Anargyros, Craciun, Daniela, Daras, Petros, Du, Bowen, Giachetti, Andrea, Lai, Yu-Kun, Li, Haisheng, Li, Yingbin, Masoumi, Majid, Peng, Yuxu, Rosin, Paul L., Sirugue, Jeremy, Sun, Li, Thermos, Spyridon, Toews, Matthew, Wei, Yang, Wu, Yujuan, Zhai, Yujia, Zhao, Tianyu, Zheng, Yanping et Montes, Matthieu.
2018.
« SHREC 2018 - Protein shape retrieval ».
In 11th Eurographics Workshop on 3D Object Retrieval (3DOR) (Delft, Netherlands, Apr. 16, 2018)
pp. 53-61.
Eurographics Association. Langevin Harnois, Félix, Harrison, Jerome, Lala, Prasun, El Boussaidi, Ghizlane, Desrosiers, Christian et Laporte, Catherine. 2018. « Promoting good scientific communication habits by leveraging the community of practice within a single research group ». Communication lors de la conférence : 2018 ASEE Annual Conference & Exposition (Salt Lake City, UT, USA, June 24-27, 2018).
Langevin Harnois, Félix, Harrison, Jerome, Lala, Prasun, El Boussaidi, Ghizlane, Desrosiers, Christian et Laporte, Catherine.
2018.
« Promoting good scientific communication habits by leveraging the community of practice within a single research group ».
In 2018 ASEE Annual Conference & Exposition (Salt Lake City, UT, USA, June 24-27, 2018)
American Society for Engineering Education.
Lapalme, Denis, Halter, Fabien, Mounaim-Rousselle, Christine et Seers, Patrice.
2018.
« Characterization of thermodiffusive and hydrodynamic mechanisms on the cellular instability of syngas fuel blended with CH4 or CO2 ».
Combustion and Flame, vol. 193.
pp. 481-490. Lapointe, M. et Barbeau, B.. 2018. « Bilan de performance des décanteurs de la station de traitement de Chomedey ». Communication lors de la conférence : Journée d’information de la Chaire industrielle CRSNG en eau potable (CICEP) (Montréal, QC, Canada, 30 oct. 2018). Lapointe, M. et Barbeau, B.. 2018. « Performance et optimisation de coagulants inorganiques préhydrolysés pour la production d’eau potable ». Communication lors de la conférence : Journée d’information de la Chaire industrielle CRSNG en eau potable (CICEP) (Montréal, QC, Canada, 30 oct. 2018).
Lapointe, M. et Barbeau, B..
2018.
« Using starch polymer as an alternative to polyacrylamide to reduce granular filter and membrane fouling ».
In Water Quality Technology Conference (Toronto, ON, Canada, Nov. 11-15, 2018)
American Water Works Association. Lapointe, M. et Barbeau, B.. 2018. « Évaluation du verre broyé recyclé comme alternative au sable de silice pour la floculation lestée ». Affiche présentée lors de la conférence : Journée québécoise des étudiants CentrEau (Longueuil, QC, Canada, 22 mars 2018).
Lapointe, Mathieu et Barbeau, Benoit.
2018.
« Selection of media for the design of ballasted flocculation processes ».
Water Research, vol. 147.
pp. 25-32.
Laporte, Catherine et Ménard, Lucie.
2018.
« Multi-hypothesis tracking of the tongue surface in ultrasound video recordings of normal and impaired speech ».
Medical Image Analysis, vol. 44.
pp. 98-114.
Laporte, Claude Y. et April, Alain.
2018.
« Software quality assurance ».
Wiley-IEEE Computer Society Press. 624 p.
Laporte, Claude Y., Munoz, Mirna, Miranda, Jezreel Mejia et O’Connor, Rory V..
2018.
« Applying software engineering standards in very small entities: From startups to grownups ».
IEEE Software, vol. 35, nº 1.
pp. 99-103.
Lara, Jorge et Chandra, Ambrish.
2018.
« Performance investigation of two novel HSFSI demodulation algorithms for encoderless FOC of PMSMs intended for EV propulsion ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 2.
pp. 1074-1083.
Laventure, Samuel, Pinsard, Basile, Lungu, Ovidiu, Carrier, Julie, Fogel, Stuart, Benali, Habib, Lina, Jean-Marc, Boutin, Arnaud et Doyon, Julien.
2018.
« Beyond spindles: interactions between sleep spindles and boundary frequencies during cued reactivation of motor memory representations ».
Sleep, vol. 41, nº 9.
Le Corre, G., Lemaire, R. et Assoukpe, P.A.C..
2018.
« Determination of the sooting propensity of a wide range of functional groups by means of a structural group contribution approach applied to coupled TSI, OESI and YSI indexes ».
In Proceedings of the Combustion Institute, Canadian Section - 2018 Spring Technical Meeting (Toronto, ON, Canada, May 14-17, 2018)
Le Floc'h, Arnaud S., Mohammed-Taifour, Abdelouahab T., Dufresne, Louis et Weiss, Julien.
2018.
« Spanwise aspects of unsteadiness in a pressure-induced turbulent separation bubble ».
In 48th AIAA Fluid Dynamics Conference, 2018 (Atlanta, GA, USA, June 25-28, 2018)
Coll. « AIAA Paper », vol. AIAA 208-3538.
American Institute of Aeronautics and Astronautics.
Le Floch, Tiphaine, Nadeau, Sylvie, Landau, Kurt et Morency, François.
2018.
« Aircraft deicing in open baskets: Study of the effects of activities on heart rate variability ».
In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64.
GFA Press. Le May, Sylvie, Khadra, Christelle, Ballard, Ariane, Perreault, Isabelle, Fortin, Jean-Simon, Hupin, Mathilde, Bouchard, Stéphane, Noel, Melanie, Hoffman, Hunter G., Dery, Johanne, Labbe, David et Paquin, David. 2018. « Decreasing recurrent pain and anxiety in medical procedures with a pediatric population: a pilot study protocol ». Affiche présentée lors de la conférence : 23rd Annual CyberPsychology, CyberTherapy & Social Networking Conference (CyPsy) (Gatineau, QC, Canada, June 26-28, 2018).
Le, Phuoc Luong, Elmughrabi, Walid, Dao, Thien My et Chabaane, Amin.
2018.
« Decision-making in construction logistics and supply chain management: Evolution and future directions ».
In 7th International Conference on Information Systems, Logistics and Supply Chain (ILS 2018) (Lyon, France, July 08-11, 2018)
pp. 646-655.
INSA Lyon.
Le, Thanh-Dat, Kaddoum, Georges et Shin, Oh-Soon.
2018.
« Joint channel resources allocation and beamforming in energy harvesting systems ».
IEEE Wireless Communications Letters, vol. 7, nº 5.
pp. 884-887.
Leclère, Jérôme et Landry, René Jr.
2018.
« Combining secondary code correlations for fast GNSS signal acquisition ».
In IEEE/ION Position, Location and Navigation Symposium (PLANS 2018) (Monterey, CA, USA, Apr. 23-26, 2018)
pp. 46-55.
IEEE.
Leclère, Jérôme, Landry, René et Botteron, Cyril.
2018.
« Comparison of L1 and L5 bands GNSS signals acquisition ».
Sensors, vol. 18, nº 9.
Lee, J., Chon, M. W., Kim, H., Rathi, Y., Bouix, S., Shenton, M. E. et Kubicki, M..
2018.
« Diagnostic value of structural and diffusion imaging measures in schizophrenia ».
NeuroImage: Clinical, vol. 18.
pp. 467-474. Lee, J., Ernst, R.E. et Samson, C.. 2018. « Source identification of lava flow fields in selection regions of Venus with comparisons to terrestrial analogues ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Mar. 23-25, 2018).
Lee, Kangjoo, Khoo, Hui Ming, Lina, Jean-Marc, Dubeau, François, Gotman, Jean et Grova, Christophe.
2018.
« Disruption, emergence and lateralization of brain network hubs in mesial temporal lobe epilepsy ».
NeuroImage: Clinical, vol. 20.
pp. 71-84.
Léger, Étienne, Reyes, Jonatan, Drouin, Simon, Collins, D. Louis, Popa, Tiberiu et Kersten-Oertel, Marta.
2018.
« Gesture-based registration correction using a mobile augmented reality image-guided neurosurgery system ».
Healthcare Technology Letters, vol. 5, nº 5.
pp. 137-142.
Léger, Jérémie, Rousse, Daniel R., Le Borgne, Kilian et Lassue, Stéphane.
2018.
« Comparing electric heating systems at equal thermal comfort: An experimental investigation ».
Building and Environment, vol. 128.
pp. 161-169.
Leivadeas, Aris, Nilsson, Thomas Y., Elahi, Aroosh, Keyhanian, Aliasghar et Lambadaris, Ioannis.
2018.
« Link adaptation for fair coexistence of Wi-Fi and LAA-LTE ».
In MobiWac 2018 - Proceedings of the 16th ACM International Symposium on Mobility Management and Wireless Access (Montreal, QC, Canada, Oct. 28 - Nov. 2, 2018)
pp. 43-50.
Association for Computing Machinery, Inc.
Lemonnier, D., Mac-Thiong, J. M. et Bélanger, P..
2018.
« Ultrasound plane wave doppler quantification using a wall-less spinal cord representative phantom ».
Acta Acustica united with Acustica, vol. 104, nº 1.
pp. 166-173.
Lepage, C., de Pierrefeu, A., Koerte, I. K., Coleman, M. J., Pasternak, O., Grant, G., Marx, C. E., Morey, R. A., Flashman, L. A., George, M. S., McAllister, T. W., Andaluz, N., Shutter, L., Coimbra, R., Zafonte, R. D., Stein, M. B., Shenton, M. E. et Bouix, S..
2018.
« White matter abnormalities in mild traumatic brain injury with and without post-traumatic stress disorder: A subject-specific diffusion tensor imaging study ».
Brain Imaging and Behavior, vol. 12, nº 3.
pp. 870-881.
Lepercq, Etienne, Blaquière, Yves et Savaria, Yvon.
2018.
« A pattern-based routing algorithm for a novel electronic system prototyping platform ».
Integration, vol. 62.
pp. 224-237. Lerouge, S., Monette, A., Ceccaldi, C., Cunnigham, N. et Lapointe, R.. 2018. « Injectable T cell delivery scaffolds for cancer immunotherapy ». Affiche présentée lors de la conférence : ISCT 24th Annual Scientific Meeting (Montreal, QC, Canada, May 02-05, 2018). Lerouge, Sophie. 2018. « Embolizing gels for cell and drug delivery for cancer therapy: a biomaterial perspective on the future of interventional oncology ». Communication lors de la conférence : Congrès FIRE 2018 (Marseille, France, Nov. 15-16, 2018).
Leroux, Tony, Laroche, Chantal, Giguère, Christian et Voix, Jérémie.
2018.
« Hearing Aid Use in Noisy Workplaces ».
Coll. « Studies and Research Projects », vol. R-1015.
Montréal : Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 97 p.
Letenneur, M., Brailovski, V., Moravej, M. et Aguirre, L..
2018.
« Porosity evaluation in compacted and sintered parts using the micro-tomography and metallography techniques ».
In Proceedings of the International Conference on Powder Metallurgy and Particulate Material (POWDERMET) (San Antonio, TX, USA, June 17-20, 2018)
Coll. « Advances in Powder Metallurgy and Particulate Materials »
pp. 835-844.
Metal Powder Industries Federation. Levasseur, Annie. 2018. « Impacts des changements climatiques : qu’est-ce que ça va changer? ». Communication lors de la conférence : Forum régional Réduction des GES, inspirons-nous pour agir! du Conseil régional de l’environnement de la Montérégie (Longueuil, QC, Canada, 16 mars 2018). Levasseur, Annie. 2018. « Les avancées scientifiques sur les émissions de GES ». Communication lors de la conférence : Conférence sur le chauffage à la biomasse forestière résiduelle (Québec, QC, Canada, 8 nov. 2018). Levasseur, Annie. 2018. « L’ABC des changements climatiques ». Communication lors de la conférence : Forum régional Énergie + Climat : mobilisons-nous! du Conseil régional de l’environnement de la Côte-Nord (Sept-Îles, QC, Canada, 18 avril 2018).
Léveillé-Guillemette, Frédéric et Monfet, Danielle.
2018.
« Calibration d’un modèle énergétique et analyse économique de mesures de conservation d’énergie d’une serre communautaire à Montréal ».
In eSim 2018 (Montréal, QC, Canada, May 09-10, 2018)
Lévesque, Vincent (inventeur) 30 janvier 2018. « Automated haptic setting generation ». Immersion Corporation (titulaire(s)). Brevet américain US 9,880,627. Lévesque, Vincent (inventeur) 30 janvier 2018. « Haptic effects conflict avoidance ». Immersion Corporation (titulaire(s)). Brevet américain US 9,881,467. Lévesque, Vincent (inventeur) 11 décembre 2018. « Haptically enabled flexible devices ». Immersion Corporation (titulaire(s)). Brevet américain US 10,152,125. Lévesque, Vincent (inventeur) 6 février 2018. « Systems and methods for closed-loop control for haptic feedback ». Immersion Corporation (titulaire(s)). Brevet américain US 9,886,829. Lévesque, Vincent, Birnbaum, David M., Belley, Benoit, Saboune, Jamal, Khoshkava, Vahid, Forest, Simon et Cruz-Hernandez, Juan Manuel (inventeurs) 27 mars 2018. « Externally-activated haptic devices and systems ». Immersion Corporation (titulaire(s)). Brevet américain US 9,928,696. Lévesque, Vincent et Cruz-Hernandez, Juan Manuel (inventeurs) 18 septembre 2018. « Method, apparatus for providing haptic cues for guidance, alignment with electrostatic friction ». Immersion Corporation (titulaire(s)). Brevet américain US 10,078,384. Lévesque, Vincent, Cruz-Hernandez, Juan Manuel, Grant, Danny, Saboune, Jamal, Wu, Liwen, Stahlberg, Kurt Eerik et Hamam, Abdelwahab (inventeurs) 24 juillet 2018. « Systems, methods for force-based object manipulation, haptic sensations ». Immersion Corporation (titulaire(s)). Brevet américain US 10,031,583. Lévesque, Vincent, Cruz-Hernandez, Juan Manuel, Motamedi, Mohammadreza, Shah, Kaniyalal et Modarres, Ali (inventeurs) 27 mars 2018. « Method and apparatus for controlling generation of electrostatic friction effects for a plurality of electrodes ». Immersion Corporation (titulaire(s)). Brevet américain US 9,928,700. Lévesque, Vincent, Grant, Danny, Modarres, Ali et Saboune, Jamal (inventeurs) 20 mars 2018. « Systems and methods for haptically-enabled curved devices ». Immersion Corporation (titulaire(s)). Brevet américain US 9,921,650. Lévesque, Vincent, Grant, Danny, Mousakhanian, Razmik, Rabemiarisoa, Andry, Isajanyan, Gor et Zhu, Alex (inventeurs) 9 octobre 2018. « Systems and methods for providing haptic feedback via a case ». Immersion Corporation (titulaire(s)). Brevet américain US 10,095,311. Lévesque, Vincent, Hamam, Abdelwahab et Grant, Danny A. (inventeurs) 20 mars 2018. « Systems and methods for deformation and haptic effects ». Immersion Corporation (titulaire(s)). Brevet américain US 9,921,609. Lévesque, Vincent et Khoshkava, Vahid (inventeurs) 20 février 2018. « Selective control of an electric field to deliver a touchless haptic effect ». Immersion Corporation (titulaire(s)). Brevet américain US 9,898,904. Lévesque, Vincent et Khoshkava, Vahid (inventeurs) 16 octobre 2018. « Wearable article having an actuator that performs non-haptic and haptic operations ». Immersion Corporation (titulaire(s)). Brevet américain US 10,102,722. Lévesque, Vincent, Modarres, Ali, Weddle, Amaya et Birnbaum, David (inventeurs) 8 mai 2018. « Systems, methods for a haptically-enabled projected user interface ». Immersion Corporation (titulaire(s)). Brevet américain US 9,965,034. Lévesque, Vincent, Saboune, Jamal, Cruz-Hernandez, Juan Manuel, Hamam, Abdelwahab, Khoshkava, Vahid et Wu, Liwen (inventeurs) 3 juillet 2018. « Systems and methods for providing haptic effects in response to deformation of a cover for an electronic device ». Corporation, Immersion (titulaire(s)). Brevet américain US 10,013,060.
Levillain, Florent, St-Onge, David, Zibetti, Elisabetta et Beltrame, Giovanni.
2018.
« More than the sum of its parts: Assessing the coherence and expressivity of a robotic swarm ».
In 27th IEEE International Symposium on Robot and Human Interactive Communication (RO-MAN 2018) (Nanjing, China, Aug. 27-31, 2018)
pp. 583-588.
Institute of Electrical and Electronics Engineers Inc..
Li, Wenchao, Vu, Viet-Hung, Liu, Zhaoheng, Thomas, Marc et Hazel, Bruce.
2018.
« Extraction of modal parameters for identification of time-varying systems using data-driven stochastic subspace identification ».
Journal of Vibration and Control, vol. 24, nº 20.
pp. 4781-4796.
Li, Xiaokai, Andrews, Sheldon, Jones, Ben et Bargteil, Adam.
2018.
« Energized rigid body fracture ».
Proceedings of the ACM on Computer Graphics and Interactive Techniques, vol. 1, nº 1.
Li, Xiaokai, Andrews, Sheldon, Jones, Ben et Bargteil, Adam. 2018. « Energized rigid body fracture ». Communication lors de la conférence : ACM SIGGRAPH Symposium on Interactive 3D Graphics and Games (i3D 2018) (Montréal, QC, Canada, May 15-19, 2018).
Lin, Kenneth, Kusaba, Satoshi, Arikawa, Takashi, Blanchard, François et Tanaka, Koichiro.
2018.
« Ultrafast carrier dynamics of exfoliated transition metal dichalcogenides with optical-pump terahertz-probe microscopy ».
In 4th Annual Summer Research Colloquium (Houston, TX, USA, Aug. 10, 2018)
Liu, Heli, Liu, Huaiju, Bocher, Philippe, Zhu, Caichao et Sun, Zhangdong.
2018.
« Effects of case hardening properties on the contact fatigue of a wind turbine gear pair ».
International Journal of Mechanical Sciences, vol. 141.
pp. 520-527.
Liu, Xu, Ounifi, Hibat Allah, Gherbi, Abdelouahe, Lemieux, Yves et Li, Wubin.
2018.
« A hybrid GPU-FPGA-based computing platform for machine learning ».
In The 9th International Conference on Emerging Ubiquitous Systems and Pervasive Networks (EUSPN-2018) / The 8th International Conference on Current and Future Trends of Information and Communication Technologies in Healthcare (ICTH-2018) (Leuven, Belgium, Nov. 5-8, 2018)
Coll. « Procedia Computer Science », vol. 141.
pp. 104-111.
Elsevier B.V..
Liu, Zhaoheng, Chung, Kwok-wai et Wang, Wei.
2018.
« A perturbed nonlinear model of an articulated vehicle with driver control ».
Chaotic Modeling and Simulation, nº 3.
pp. 295-304.
Lizotte-Latendresse, Simon et Beauregard, Yvan.
2018.
« Implementing self-service business analytics supporting lean manufacturing: A state-of-the-art review ».
[Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 11.
pp. 1143-1148.
Lopez, Ruben Rodrigo, Nerguizian, Vahé et Stiharu, Ion.
11 septembre 2018.
« Mass Production of Liposomes—Pushing Forward Next-Generation Therapies ».
[Article de recherche]. Substance ÉTS.
Lopez, Ruben Rodrigo, Nerguizian, Vahé et Stiharu, Ion.
11 septembre 2018.
« Une percée dans la production de masse des liposomes ».
[Article de recherche]. Substance ÉTS.
Lopez, Ruben, Nerguizian, Vahé et Stiharu, Ion.
2018.
« Low-cost 3D-printed PLA-COC micro hydrodynamic focused device ».
In 16th IEEE International New Circuits and Systems Conference (NEWCAS) (Montreal, QC, Canada, June 24-27, 2018)
pp. 327-330.
Piscataway, NJ, USA : IEEE.
Lopez-Herrejon, Roberto Erick, Illescas, Sheny et Egyed, Alexander.
2018.
« A systematic mapping study of information visualization for software product line engineering ».
Journal of Software: Evolution and Process, vol. 30, nº 2.
Louafi, Habib, Coulombe, Stéphane et Cheriet, Mohamed.
2018.
« A TOPSIS-based QoE model for adapted content selection of slide documents ».
Multimedia Tools and Applications, vol. 77, nº 20.
pp. 26741-26768.
Loucif, Abdelhalim, Ben Fredj, Emna, Harris, Nathan, Shahriari, Davood, Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe.
2018.
« Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ».
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 49, nº 3.
pp. 1046-1055.
Loucif, Abdelhalim, Bitterlin, Matthieu, Jahazi, Mohammad, Tremblay, Rami, Morin, Jean-Benoît et Lapierre-Boire, Louis-Philippe.
2018.
« Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ».
Metallography, Microstructure, and Analysis, vol. 7, nº 2.
pp. 203-208.
Loucif, Abdelhalim, Shahriari, Davood, Chadha, Kanwal, Zhang, Chunping, Jahazi, Mohammad, Tremblay, Rami et Lapierre-Boire, Louis-Philippe.
2018.
« Cracking and failure in a high strength low alloy steel during solidification ».
In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 15-20.
Trans Tech Publications Ltd.
Loucif, Abdelhalim, Touazine, Heithem et Jahazi, Mohammad.
2018.
« Prediction of steel transformation temperatures using thermodynamic modeling and design of experiments (DOE) ».
In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 2284-2289.
Trans Tech Publications Ltd.
Luo, Jie, Frisken, Sarah, Machado, Ines, Zhang, Mlaomlao, Pieper, Steve, Golland, Polina, Toews, Matthew, Unadkat, Prashln, Sedghi, Alireza, Zhou, Haoyln, Mehrtash, Alireza, Preiswerk, Frank, Cheng, Cheng-Chleh, Golby, Alexandra, Sugiyama, Masashi et Wells, William M. III.
2018.
« Using the variogram for vector outlier screening: application to feature-based image registration ».
International Journal of Computer Assisted Radiology and Surgery, vol. 13, nº 12.
pp. 1871-1880.
Luo, Jie, Toews, Matthew, Machado, Ines, Frisken, Sarah, Zhang, Miaomiao, Preiswerk, Frank, Sedghi, Alireza, Ding, Hongyi, Pieper, Steve, Golland, Polina, Golby, Alexandra, Sugiyama, Masashi et Wells Iii, William M..
2018.
« A feature-driven active framework for ultrasound-based brain shift compensation ».
In Medical Image Computing and Computer Assisted Intervention – MICCAI 2018 : 21st International Conference, Granada, Spain, September 16-20, 2018, Proceedings, Part IV (Granada, Spain, Sept. 16-20, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11073.
pp. 30-38.
Springer.
Luong, Phuong, Despins, Charles, Gagnon, Francois et Tran, Le-Nam.
2018.
« A novel energy-efficient resource allocation approach in limited fronthaul virtualized C-RANs ».
In 87th IEEE Vehicular Technology Conference (VTC Spring 2018) (Porto, Portugal, June 03-06, 2018)
IEEE.
Luong, Phuong, Gagnon, François, Despins, Charles et Tran, Le-Nam.
2018.
« Joint virtual computing and radio resource allocation in limited fronthaul green C-RANs ».
IEEE Transactions on Wireless Communications, vol. 17, nº 4.
pp. 2602-2617. Ly, Nam et Constantin, Nicolas. 2018. « Configurable integrated power input/output systems for avionic applications ». Affiche présentée lors de la conférence : STARaCom Industry Networking Day (Montreal, QC, Canada, Oct. 30, 2018).
Lyassami, Mountadar, Shahriari, Davood, Ben Fredj, Emna, Morin, Jean-Benoit et Jahazi, Mohammad.
2018.
« Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Lyazidi, Mohammed Yazid, Aitsaadi, Nadjib et Langar, Rami.
2018.
« A dynamic resource allocation framework in LTE downlink for Cloud-Radio Access Network ».
Computer Networks, vol. 140.
pp. 101-111.
M. O. Cruz, Rafael, Sabourin, Robert et Cavalcanti, George D. C..
2018.
« On dynamic ensemble selection and data preprocessing for multi-class imbalance learning ».
In Proceedings of the International Conference on Pattern Recognition and Artificial Intelligence (ICPRAI'2018) (Montréal, QC, Canada, May 13-17, 2018)
pp. 189-194.
CENPARMI, Concordia University.
Ma, Lingyue, Dugnani, Roberto et Zednik, Ricardo.
2018.
« Quantifying the accuracy of fractographic strength estimates in silicate glasses ».
Journal of the European Ceramic Society, vol. 38, nº 10.
pp. 3643-3649.
Ma, Y., Moosavi-Khoonsari, E., Kero, I. et Tranell, G..
2018.
« The effect of water vapour on fume formation in a SiMn alloy system ».
In Infacon XV: International Ferro-Alloys Congress (Cape Town, South Africa, Feb. 25-28, 2018)
Southern African Institute of Mining and Metallurgy.
Ma, Yan, Moosavi-Khoonsari, Elmira, Kero, Ida T. et Tranell, Gabriella M..
2018.
« Element distribution in the silicomanganese production process ».
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 49, nº 5.
pp. 2444-2457.
Machado, A., Cai, Z., Pellegrino, G., Marcotte, O., Vincent, T., Lina, J. M., Kobayashi, E. et Grova, C..
2018.
« Optimal positioning of optodes on the scalp for personalized functional near-infrared spectroscopy investigations ».
Journal of Neuroscience Methods, vol. 309.
pp. 91-108.
Machado, Inês, Toews, Matthew, Luo, Jie, Unadkat, Pashin, Essayed, Walid, George, Elizabeth, Teodoro, Pedro, Carvalho, Herculano, Martins, Jorge, Golland, Polina, Pieper, Steve, Frisken, Sarah, Golby, Alexandra et Wells, William III.
2018.
« Non-rigid registration of 3D ultrasound for neurosurgery using automatic feature detection and matching ».
International Journal of Computer Assisted Radiology and Surgery, vol. 13, nº 10.
pp. 1525-1538.
Machado, Ines, Toews, Matthew, Luo, Jie, Unadkat, Prashin, Essayed, Walid, George, Elizabeth, Teodoro, Pedro, Carvalho, Herculano, Martins, Jorge, Golland, Polina, Pieper, Steve, Frisken, Sarah, Golby, Alexandra, Wells, William et Ou, Yangming.
2018.
« Deformable MRI-ultrasound registration via attribute matching and mutual-saliency weighting for image-guided neurosurgery ».
In Simulation, Image Processing, and Ultrasound Systems for Assisted Diagnosis and Navigation : International Workshops, POCUS 2018, BIVPCS 2018, CuRIOUS 2018, and CPM 2018, Held in Conjunction with MICCAI 2018, Granada, Spain, September 16–20, 2018, Proceed (Granada, Spain, Sept. 16-20, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11042.
pp. 165-171.
Springer Verlag.
Mahoutian, Mehrdad, Chaallal, Omar et Shao, Yixin.
2018.
« Pilot production of steel slag masonry blocks ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 45, nº 7.
pp. 537-546.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2018.
« Characterization of mechanical properties and formability of a superplastic Al-Mg alloy ».
In NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Tokyo, Japan, July 30-Aug. 6, 2018)
Coll. « Journal of Physics: Conference Series », vol. 1063.
IOP Publishing.
Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas.
2018.
« Finite element simulation of high-speed blow forming of an automotive component ».
Metals, vol. 8, nº 11.
Malekloo, Mohammad-Hossein, Kara, Nadjia et El Barachi, Mary.
2018.
« An energy efficient and SLA compliant approach for resource allocation and consolidation in cloud computing environments ».
Sustainable Computing: Informatics and Systems, vol. 17.
pp. 9-24. Mallozzi, S., Samson, C., Holladay, S. et Ersnt, R.E.. 2018. « Detection and characterization of lava tubes using electromagnetic surveying at Lava Beds National Monument, California ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Mar. 23-25, 2018).
Marani, Mohsen, Songmene, Victor, Kouam, Jules et Zedan, Yasser.
2018.
« Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg 2Si-2Cu metal matrix composite with modifier elements ».
International Journal of Advanced Manufacturing Technology, vol. 99, nº 1-4.
pp. 789-802.
Marani, Mohsen, Songmene, Victor, Kouam, Jules et Zedan, Yasser.
2018.
« Valuation of the effect of barium on surface roughness and ultrafine particle emission while dry milling Al-20Mg2Si metal matrix composite ».
In 2018 6th International Conference on Mechanical, Automotive and Materials Engineering (CMAME) (Hong Kong, China, Aug. 10-12, 2018)
Piscataway, NJ, USA : IEEE. Marani-Barzani, Mohsen et Songmene, Victor. 2018. « Machinability and mechanical properties of Al-Mg2Si in-situ composite with bismuth or barium ». Affiche présentée lors de la conférence : REGAL student's day). Maranzana, Roland, Msaaf, Omar et Rivest, Louis (inventeurs) 17 avril 2018. « Method and system for comparing 3D models ». SOCOVAR (titulaire(s)). Brevet américain US 9,946,732 B2. Maranzana, Roland, Msaaf, Omar et Rivest, Louis (inventeurs) 18 décembre 2018. « Méthode et système de comparaison de modèles 3D ». Socovar (titulaire(s)). Brevet canadien CA 2929892. [Titre traduit: Method and system for comparing 3D models]. Marchand, G., Lavoie, J., Cloutier, Y. et Hallé, S.. 2018. « Occupational exposure of embalmers to bioaerosols ». Communication lors de la conférence : International Congress on Aerobiology (Parma, Italy, Sept. 3-7, 2018). Marleau Donais, Francis. 2018. « Apprendre à faciliter des ateliers d’aide à la décision multicritère : Expériences d’étudiants dans le cadre d’un cours sur la décision multicritère ». Communication lors de la conférence : Séminaire organisé par la Société canadienne de recherche opérationnelle SCRO‐Québec (Québec, QC, Canada, 21 nov. 2018). Marleau Donais, Francis. 2018. « Du bon usage des statistiques : Faire et ne pas faire ». Communication lors de la conférence : Atelier du CRAD : Les approches méthodologiques (Québec, QC, Canada). Marleau Donais, Francis et Abi-Zeid, Irène. 2018. « Learning multi-criteria decision-aiding workshop facilitation: Experience from student case studies ». Communication lors de la conférence : 29th European Conference on Operational Research, EURO (Valencia, Spain, July 08-11, 2018).
Marleau Donais, Francis, Abi-Zeid, Irène, Lavoie, Roxane et Waygood, Owen.
2018.
« Évaluation du potentiel des rues à être réaménagées en rues conviviales : une approche multicritère ».
Routes et Transports, vol. 47, nº 1.
pp. 34-38.
Marleau Donais, Francis, Abi-Zeid, Irène, Waygood, Owen et Lavoie, Roxane.
2018.
« Integrating sustainable transportation in decision-making processes: A comparison between cost-benefit analysis and multi-criteria decision aiding ».
In 53rd Annual Meetings of the Canadian Transportation Research Forum (Gatineau, QC, Canada, June 03-06, 2018)
Canadian Transportation Research Forum. Marleau Donais, Francis, Abi-Zeid, Irène, Waygood, Owen et Lavoie, Roxane. 2018. « Intégrer la mobilité durable dans l’évaluation de projets : Une comparaison entre analyse coût-bénéfice et aide à la décision multicritère ». Communication lors de la conférence : 23e Colloque étudiant du CRAD (Québec, QC, Canada, 16 mars 2018).
Martel, Jean-Luc, Mailhot, Alain, Brissette, François et Caya, Daniel.
2018.
« Role of natural climate variability in the detection of anthropogenic climate change signal for mean and extreme precipitation at local and regional scales ».
Journal of Climate, vol. 31, nº 11.
pp. 4241-4263.
Martin, Alexis et Voix, Jérémie.
2018.
« In-ear audio wearable: Measurement of heart and breathing rates for health and safety monitoring ».
IEEE Transactions on Biomedical Engineering, vol. 65, nº 6.
pp. 1256-1263.
Martins, Jefferson G., Oliveira, Luiz E. S., Sabourin, Robert et Britto Jr, Alceu S..
2018.
« Forest species recognition based on ensembles of classifiers ».
In 2018 IEEE 30th International Conference on Tools with Artificial Intelligence (ICTAI) (Volos, Greece, Nov. 5-7, 2018)
pp. 371-378.
Los Alamitos, CA, USA : IEEE Computer Society.
Mas, Alexandre, Baraer, Michel, Arsenault, Richard, Poulin, Annie et Prefontaine, Jonathan.
2018.
« Targeting high robustness in snowpack modeling for Nordic hydrological applications in limited data conditions ».
Journal of Hydrology, vol. 564.
pp. 1008-1021.
Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe.
2018.
« Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ».
Journal of Manufacturing Processes, vol. 34, part A.
pp. 86-95.
Masoumi, F., Thebaud, L., Shahriari, D., Jahazi, M., Cormier, J., Devaux, A. et Flipo, B. C. D..
2018.
« High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ».
Materials Science and Engineering: A, vol. 710.
pp. 214-226. Masse-Dufresne, J., Baudron, P. et Barbecot, F.. 2018. « Dynamique de recouvrement d’un système de FSB à 2 lacs suite à un événement d’inondation intense ». Communication lors de la conférence : Congrès des étudiants du Geotop (La Malbaie, QC, Canada, 21-23 mars 2018). Masse-Dufresne, J., Baudron, P. et Barbecot, F.. 2018. « Sur la piste de l’origine des eaux : Mieux comprendre la résilience des systèmes de filtration sur berge ». Communication lors de la conférence : Ma Thèse en 180 secondes (Montréal, QC, Canada, 15 mars 2018). Masse-Dufresne, J., Baudron, P., Barbecot, F., Pasquier, P., Marcotte, D., Proteau-Bédard, F., Patenaude, M., Pontoreau, C. et Delestre, M.. 2018. « Recovery dynamics of surface water/groundwater interactions following an intense flooding event at 2-lake bank filtration site ». Communication lors de la conférence : Goldschmidt Conférence (Boston, MA, USA, Aug. 12-17, 2018).
Matar, Georges, Lina, Jean-Marc, Carrier, Julie et Kaddoum, Georges.
2018.
« Unobtrusive sleep monitoring using cardiac, breathing and movements activities: an exhaustive review ».
IEEE Access, vol. 6.
pp. 45129-45152.
Matoussi, Salma, Fajjari, Ilhem, Costanzo, Salvatore, Aitsaadi, Nadjib et Langar, Rami.
2018.
« A user centric virtual network function orchestration for agile 5G Cloud-RAN ».
In IEEE International Conference on Communications (ICC) (Kansas City, MO, USA, May 20-24, 2018)
IEEE.
Mazars, Thibault et Francis, Adel.
2018.
« Dynamic 4D space planning using chronographical modeling ».
In Proceedings of the Creative Construction Conference (Ljubljana, Slovenia, June 30-July 3, 2018)
pp. 747-751.
Creative Construction Conference.
Mazyan, W. I., Ahmadi, A., Brinkerhoff, J., Ahmed, H. et Hoorfar, M..
2018.
« Enhancement of cyclone solid particle separation performance based on geometrical modification: Numerical analysis ».
Separation and Purification Technology, vol. 191.
pp. 276-285.
Mbassegue, Patrick et Gardoni, Mickael.
2018.
« The methodological challenges related to assess the outcomes of knowledge management initiatives: The case of communities of practice ».
In Product Lifecycle Management to Support Industry 4.0 : 15th IFIP WG 5.1 International Conference (PLM) (Turin, Italy, July 2-4, 2018)
Coll. « IFIP Advances in Information and Communication Technology », vol. 540.
pp. 579-589.
Springer International Publishing.
McGrath, Heather, Abo El Ezz, Ahmad et Nastev, Miroslav.
2018.
« Development of probabilistic cost function for flood damage to residential structures ».
In 6th International Disaster Mitigation Specialty Conference 2018, Held as Part of the Canadian Society for Civil Engineering Annual Conference 2018 (Fredericton, NB, Canada, June 13-16, 2018)
pp. 101-108.
Canadian Society for Civil Engineering. McGrath, Heather, Abo El Ezz, Ahmad et Nastev, Miroslav. 2018. « Modèle probabiliste d'évaluation des dommages causés par les inondations ». Communication lors de la conférence : Congrès annuel de l’Association francophone pour le savoir - ACFAS, Université du Québec à Chicoutimi (Chicoutimi, QC, Canada, 10 mai 2018).
McGrath, Heather, Bourgon, Jean-François, Proulx-Bourque, Jean-Samuel, Nastev, Miroslav et Abo El Ezz, Ahmad.
2018.
« A comparison of simplified conceptual models for rapid web-based flood inundation mapping ».
Natural Hazards, vol. 93, nº 2.
pp. 905-920.
McGrath, Heather, Proulx-Bourque, Jean-Samuel, Bourgon, Jean-François, Nastev, Miroslav et Abo El Ezz, Ahmed.
2018.
« A comparison of rapid DTM based approaches for on-demand flood inundation mapping ».
In IEEE International Geoscience and Remote Sensing Symposium (IGARSS 2018) (Valencia, Spain, July 22-27, 2018)
pp. 8397-8400.
Institute of Electrical and Electronics Engineers Inc.. McGuffin, Michael J.. 2018. « What is the silver bullet of visualization? ». Communication lors de la conférence : ChinaVis 2018 (Shanghai, China, July 28, 2018). McPeak, S., Mallozzi, S., Samson, C. et Elliott, B.. 2018. « Mapping glacial overburden thickness over a kimberlite pipe using passive seismics ». Affiche présentée lors de la conférence : 9th Annual Minerals Colloquium, PDAC International Convention (Toronto, ON, Canada, Mar. 05, 2018). McPeak, S., Samson, C., Elliott, B. et Lamontagne, M.. 2018. « Application of passive seismic methodologies to the determination of overburden thickness in a permafrost-rich environment ». Communication lors de la conférence : Advances in Earth Sciences Research Conference (Ottawa, ON, Canada, Mar. 23-25, 2018). McPeak, S, Samson, C., Lamontagne, M. et Elliott, B.. 2018. « Application of passive seismic methodologies to the determination of overburden thickness ». Affiche présentée lors de la conférence : Yellowknife Geoscience Forum (Yellownife, NT, Canada, Nov. 20-22, 2018).
Md Tariq, Shah Ahsanuzzaman, Despins, Charles L., Affes, Sofiène et Nerguizian, Chahé.
2018.
« 60 GHz temporal dispersion characteristics with different antenna polarizations in an underground mine ».
In 28th Annual IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC 2017) (Montreal, QC, Canada, Oct. 08-13, 2017)
IEEE.
Mebarki, Fouzia et David, Eric.
2018.
« Dielectric characterization of thermally aged recycled Polyethylene Terephthalate and Polyethylene Naphthalate reinforced with inorganic fillers ».
Polymer Engineering and Science, vol. 58, nº 5.
pp. 701-712.
Mehrasa, Majid, Sharifzadeh, Mohammad et Al-Haddad, Kamal.
2018.
« A droop based-control strategy of stand-alone single-phase converters for microgrid applications ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 5261-5266.
IEEE.
Mehrasa, Majid, Sharifzadeh, Mohammad, Sheikholeslami, Abdolreza, Pouresmaeil, Edris, Catalão, João P. S. et Al-Haddad, Kamal.
2018.
« A control strategy based on the upper and lower's arms modulation functions of MMC in HVDC applications ».
In 19th IEEE International Conference on Industrial Technology (ICIT 2018) (Lyon, France, Feb. 20-22, 2018)
pp. 1873-1878.
IEEE.
Mekki, Ibrahim El Khalil, Bouhamida, Mohamed et Saad, Maarouf.
2018.
« Robust control of a chemical multivariable system in the presence of strong uncertainties in the model parameters ».
International Review of Automatic Control, vol. 11, nº 4.
pp. 166-173.
Melero, C., Rincón, R., Muñoz, J., Zhang, G., Sun, S., Perez, A., Royuela, O., González-Gago, C. et Calzada, M. D..
2018.
« Scalable graphene production from ethanol decomposition by microwave argon plasma torch ».
Plasma Physics and Controlled Fusion, vol. 60, nº 1.
Menage, Delphine, Lemaire, Romain et Seers, Patrice.
2018.
« Experimental study and chemical reactor network modeling of the high heating rate devolatilization and oxidation of pulverized bituminous coals under air, oxygen-enriched combustion (OEC) and oxy-fuel combustion (OFC) ».
Fuel Processing Technology, vol. 177.
pp. 179-193. Ménard, Michaël, Nabki, Frederic, Rahim, Mohamed, Brière, Jonathan et Beaulieu, Philippe-Olivier (inventeurs) 4 septembre 2018. « Mirror based micromechanical systems and methods ». Gestion Valeó (titulaire(s)). Brevet américain US 10,067,293.
Ménard, Pierre André, Ratté, Sylvie, Parent, Geneviève et Barbedor, Franck.
2018.
« Manual and automatic annotation of meeting reports with young offenders for quality assessment of interventions ».
In Proceedings of the Workshop on Annotation in Digital Humanities (annDH 2018) (Sofia, Bulgaria, Aug. 06-10, 2018)
Coll. « CEUR Workshop Proceedings », vol. 2155.
pp. 24-30.
CEUR-WS.
Merabtine, Abdelatif, Gardan, Nicolas, Gardan, Julien, Badreddine, Houssem, Zhang, Chuan, Zhu, Feng et Gong, Xiao-Lu.
2018.
« Experimental and numerical thermal analysis of open-cell metal foams developed through a topological optimization and 3D printing process? ».
EPJ Applied Physics, vol. 83, nº 1.
Merabtine, Abdelatif, Maalouf, Chadi, Al Waheed Hawila, Abed, Martaj, Nadia et Polidori, Guillaume.
2018.
« Building energy audit, thermal comfort, and IAQ assessment of a school building: A case study ».
Building and Environment, vol. 145.
pp. 62-76.
Merabtine, Abdelatif, Mokraoui, Salim, Kheiri, Abdelhamid, Dars, Anass et Hawila, Abed Al Waheed.
2018.
« Experimental and multidimensional numerical analysis of the thermal behavior of an anhydrite radiant slab floor heating system: A multi-objective sensitivity study ».
Energy and Buildings, vol. 174.
pp. 619-634.
Mezghani, Neila, Mechmeche, Imene, Mitiche, Amar, Ouakrim, Youssef et de Guise, Jacques A..
2018.
« An analysis of 3D knee kinematic data complexity in knee osteoarthritis and asymptomatic controls ».
PLoS ONE, vol. 13, nº 10.
Meziani, Salim, Zarour, Djamal et Thomas, Marc.
2018.
« Experimental studies for bearings degradation monitoring at an early stage using analysis of variance ».
Diagnostyka, vol. 19, nº 4.
pp. 81-87.
Mhiri, Mohamed, Abuelwafa, Sherif, Desrosiers, Christian et Cheriet, Mohamed.
2018.
« Hierarchical representation learning using spherical k-means for segmentation-free word spotting ».
Pattern Recognition Letters, vol. 101.
pp. 52-59.
Mhiri, Mohamed, Desrosiers, Christian et Cheriet, Mohamed.
2018.
« Convolutional pyramid of bidirectional character sequences for the recognition of handwritten words ».
Pattern Recognition Letters, vol. 111.
pp. 87-93.
Michaud, Francois, Dalir, Hamid et Joncas, Simon.
2018.
« Structural design and optimization of an aircraft morphing wing: Composite skin ».
Journal of Aircraft, vol. 55, nº 1.
pp. 195-211.
Miloud, Rezkallah, Chandra, Ambrish, Saad, Maarouf, Tremblay, Marco, Singh, Sani Eev, Singh, Bhim et Ibrahim, Hussein.
2018.
« Control of standalone microgrid for mine site ».
In 2018 IEEE Canadian Conference on Electrical & Computer Engineering (CCECE) (Québec, QC, Canada, May 13-16, 2018)
Piscataway, NJ, USA : IEEE.
Milovanoff, Alexandre, Dandres, Thomas, Gaudreault, Caroline, Cheriet, Mohamed et Samson, Réjean.
2018.
« Real-time environmental assessment of electricity use: a tool for sustainable demand-side management programs ».
International Journal of Life Cycle Assessment, vol. 23, nº 10.
pp. 1981-1994.
Mingli, Zhang, Desrosiers, Christian, Yuhong, Guo, Caiming, Zhang, Khundrakpam, Budhachandra et Evans, Alan.
2018.
« Brain status prediction with non-negative projective dictionary learning ».
In Machine Learning in Medical Imaging. 9th International Workshop (MLMI 2018) held in conjunction with MICCAI 2018, 16 Sept. 2018 (Granada, Spain, Sept. 16, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11046.
pp. 152-160.
Cham, Switzerland : Springer International Publishing.
Miraoui, Moeiz, El-etriby, Sherif, Tadj, Chakib et Abid, Abdulbasit Zaid.
2018.
« A hybrid modular context-aware services adaptation for a smart living room ».
Intelligent Automation and Soft Computing, vol. 24, nº 2.
pp. 299-308.
Mirvakili, Nasibeh, Saleh, Wael, Di Labbio, Giuseppe et Kadem, Lyes.
2018.
« Blood flow downstream of a dysfunctional mechanical heart valve ».
[Résumé d'une communication à une conférence]. Bulletin of the American Physical Society, vol. 63, nº 13.
p. 382.
Mirzaalian, H., Ning, L., Savadjiev, P., Pasternak, O., Bouix, S., Michailovich, O., Karmacharya, S., Grant, G., Marx, C. E., Morey, R. A., Flashman, L. A., George, M. S., McAllister, T. W., Andaluz, N., Shutter, L., Coimbra, R., Zafonte, R. D., Coleman, M. J., Kubicki, M., Westin, C. F., Stein, M. B., Shenton, M. E. et Rathi, Y..
2018.
« Multi-site harmonization of diffusion MRI data in a registration framework ».
Brain Imaging and Behavior, vol. 12, nº 1.
pp. 284-295.
Moazzezi Eftekhar, Sara, Suryn, Witold, Roy, Jonathan et Terfas, Hebatalla.
2018.
« Towards the development of a widely accepted cloud trust model ».
In 26th International Software Quality Management (SQM) Conference (London, England, Mar. 25, 2018)
pp. 73-94.
Southampton Solent University.
Mobtaker, Azadeh, Montecinos, Julio, Ouhimmou, Mustapha, Ronnqvist, Mikael et Paquet, Marc.
2018.
« Minimizing spatial dispersion of forest harvest areas using spectral clustering and set covering modelling ».
Canadian Journal of Forest Research, vol. 48, nº 12.
pp. 1563-1576.
Mobtaker, Azadeh, Ouhimmou, Mustapha, Rönnqvist, Mikael et Paquet, Marc.
2018.
« Development of an economically sustainable and balanced tactical forest management plan: a case study in Québec ».
Canadian Journal of Forest Research, vol. 48, nº 2.
pp. 197-207.
Mofidi, Amir, Cheng, Lijuan, Chaallal, Omar et Shao, Yixin.
2018.
« Shear Strengthening of RC Beams with NSM FRP — Influencing Parameters and A Theoretical Model ».
In 13th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures (Anaheim, CA, USA, Oct. 15-19, 2017)
Coll. « Special Publication », vol. 327.
pp. 497-512.
American Concrete Institute.
Moghaddam, Fereydoun Farrahi, Li, Wubin et Gherbi, Abdelouahed.
2018.
« DataFall: a policy-driven algorithm for decentralized placement and reorganization of replicated data ».
In 2018 IEEE Intl Conf on Parallel & Distributed Processing with Applications, Ubiquitous Computing & Communications, Big Data & Cloud Computing, Social Computing & Networking, Sustainable Computing & Communications (ISPA/IUCC/BDCloud/SocialCom/SustainCom) (Melbourne, Australia, Dec. 11-13, 2018)
pp. 667-675.
Los Alamitos, CA, USA : IEEE Computer Society.
Mognhol, T. Z. et Melhado, S. B..
2018.
« O impacto da coordenação de projetos em canteiro de obras: estudo de caso de empresas internacionais atuando no Brasil ».
In XVII Encontro Nacional de Tecnologia do Ambiente Construído (ENTAC) (Foz do Iguaçu, Brésil, Nov. 12-14, 2018)
pp. 2292-2301.
Porte Alegre : ANTAC.
Mohafida, Abdelmoula, Ourasseb, Amine Ait, Kenné, Jean-Pierre et Benjellounb, Khalid.
2018.
« Production and corrective maintenance control of a manufacturing system subject to imperfect repairs ».
International Journal of Trend in Research and Development, nº Special issue.
pp. 43-48.
Mohamadi, Houssem E., Kara, Nadjia et Lagha, Mohand.
2018.
« Formal verification of RGR-SEC, a secured RGR routing for UAANETs using AVISPA, Scyther and Tamarin ».
In Future Network Systems and Security : 4th International Conference on Future Network Systems and Security (FNSS 2018) (Paris, France, July 09-11, 2018)
Coll. « Communications in Computer and Information Science », vol. 878.
pp. 3-16.
Springer Verlag.
Mohammadian, Neda, Turenne, Sylvain et Brailovski, Vladimir.
2018.
« Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing ».
Journal of Materials Processing Technology, vol. 252.
pp. 728-738.
Mohsenian Hadad Amlashi, Sahar, Vaillancourt, Michel, Carter, Alan et Bilodeau, Jean-Pascal.
2018.
« Resilient modulus of pavement unbound granular materials containing recycled glass aggregate ».
Materials and Structures = Matériaux et Constructions, vol. 51, nº 4.
Molina, Sophie, Haillot, Didier, Marie, Bertille, Deydier, Alexandre et Bédécarrats, Jean-Pierre.
2018.
« Matériaux de stockage thermocline : de la sélection d’un couple huile-solide au modèle de stockage ».
In 26e congrès de la Société française de thermique (SFT 2018) (Pau, France, 29 mai-1er juin 2018)
pp. 253-260.
Molina, Sophie, Haillot, Didier, Marie, Bertille, Deydier, Alexandre et Bédécarrats, Jean-Pierre.
2018.
« Oil-solid combination for dual-media thermocline storage: from media choice to system modelling ».
In ECOS 2018 - Proceedings of the 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (Guimaraes, Portugal, June 17-21, 2018)
University of Minho.
Mondal, Sanjoy, Ghommam, Jawhar et Saad, Maarouf.
2018.
« Homogeneous finite-time consensus control for higher-order multi-agent systems by full order sliding mode ».
Journal of Systems Science and Complexity, vol. 31, nº 5.
pp. 1186-1205.
Mondoukpè, Lagnika, Hausler, Robert et Glaus, Mathias.
2018.
« Dynamic matrix for an adaptive environment management in mining: a feed-engineering alternative? ».
Environmental Management and Sustainable Development, vol. 7, nº 2.
pp. 193-220.
Monnier, Anne, Lina, Jean-Marc, Dell'Acqua, Roberto, Doro, Mattia, Wu, Lesley et Jolicoeur, Pierre.
2018.
« Intra and inter-hemispheric phase synchronization during visuo-spatial attention deployment and retention in visual work memory ».
[Résumé d'une communication à une conférence]. Psychophysiology, vol. 55, nº Suppl. 1.
S35.
Montecinos, Julio, Ouhimmou, Mustapha et Chauhan, Satyaveer.
2018.
« Waiting-time estimation in walk-in clinics ».
International Transactions in Operational Research, vol. 25, nº 1.
pp. 51-74.
Montecinos, Julio, Ouhimmou, Mustapha, Chauhan, Satyaveer et Paquet, Marc.
2018.
« Forecasting multiple waste collecting sites for the agro-food industry ».
Journal of Cleaner Production, vol. 187.
pp. 932-939.
Moosavi-Khoonsari, E., Van Ende, M. A. et Jung, I. H..
2018.
« Kinetic model for hot metal pretreatment using lime and magnesium ».
In 7th International Congress on Science and Technology of Steelmaking : The Challenge of Industry 4.0 (Venice, Italy, June 13-15, 2018)
pp. 478-485.
Associazione Italiana di Metallurgia.
Morais, G. A. T., Lira, V. Q., Pereira, A. P., Nascimento, E. C., Lordsleem Junior, A. C. et Melhado, S. B..
2018.
« O desempenho acústico e as empresas de projeto de arquitetura à luz da Norma de Desempenho ».
In XVII Encontro Nacional de Tecnologia do Ambiente Construído (ENTAC) (Foz do Iguaçu, Brésil, Nov. 12-14, 2018)
pp. 2405-2412.
Porte Alegre : ANTAC.
Moreau, Stéphane, Dignou, Bastien, Jaiswal, Prateek, Yakhina, Gyuzel R., Pasco, Yann, Sanjose, Marlène, Alstrom, Bruce et Atalla, Noureddine.
2018.
« Trailing-edge noise of a flat plate with several liner-type porous appendices ».
In 24th AIAA/CEAS Aeroacoustics Conference (Atlanta, GA, USA, June 25-29, 2018)
Coll. « AIAA Paper », vol. AIAA 2018-3119.
American Institute of Aeronautics and Astronautics.
Moreau, Stéphane, Sanjosé, Marlène et Magne, Stéphan.
2018.
« Optimization of tonal noise control with flow obstruction ».
Journal of Sound and Vibration, vol. 437.
pp. 264-275.
Moreira, Christian Miranda, Kaddoum, Georges et Bou-Harb, Elias.
2018.
« Cross-layer authentication protocol design for ultra-dense 5G HetNets ».
In IEEE International Conference on Communications (ICC 2018) (Kansas City, MO, USA, May 20-24, 2018)
Piscataway, NJ, USA : IEEE.
Morelli, Ben, Hawkins, Troy R., Niblick, Briana, Henderson, Andrew D., Golden, Heather E., Compton, Jana E., Cooter, Ellen J. et Bare, Jane C..
2018.
« Critical review of eutrophication models for life cycle assessment ».
Environmental Science and Technology, vol. 52, nº 17.
pp. 9562-9578.
Morency, François et Beaugendre, Héloïse.
2018.
« Parametric studies of flat plate trajectories using VIC and penalization ».
Modelling and Simulation in Engineering, vol. 2018.
Moret, Maxime, Garnier, François, Phutthavong, Patricia et Moustapha, Hany.
2018.
« Automation of a turbine tip clearance preliminary calculation process ».
In Proceedings of GPPS Society Forum 18 (Montréal, QC, Canada, May 07-09, 2018)
Global Power and Propulsion Society.
Morin Pépin, Stephane et Francis, Adel.
2018.
« Calculation of the construction sites' occupancy rate using Chronographic modeling ».
In CSCE Annual Conference / Congrès Annuel de la SCGC (Frédericton, NB, Canada, June 13-16, 2018)
Canadian Society for Civil Engineering.
Morin Pépin, Stephane et Francis, Adel.
2018.
« Calculation of the construction sites' occupancy rate using chonographic modeling ».
In CSCE General Conference (Fredericton, NB, Canada, June 13-16, 2018)
pp. 653-659.
Canadian Society for Civil Engineering.
Mortazavi, Hashem, Mehrjerdi, Hasan et Saad, Maarouf.
2018.
« A modified load encroachment technique for power factor monitoring ».
In 2018 IEEE Power & Energy Society General Meeting (PESGM) (Portland, OR, USA, Aug. 5-10, 2018)
Piscataway, NJ, USA : IEEE.
Mortazavi, Hashem, Mehrjerdi, Hasan, Saad, Maarouf et Lefebvre, Serge.
2018.
« Distribution power factor monitoring in presence of high RES integration using a modified load encroachment technique ».
IET Renewable Power Generation, vol. 12, nº 7.
pp. 851-858.
Mostafa, Ahmad, Shahriari, Davood, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2018.
« Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ».
International Journal of Advanced Manufacturing Technology, vol. 96, nº 1-4.
pp. 371-385.
Motamedi, Ali, Iordanova, Ivanka et Forgues, Daniel.
2018.
« FM-BIM preparation method and quality assessment measures ».
In 17th International Conference on Computing in Civil and Building Engineering (Tampere, Finland, June 22-24, 2018)
pp. 153-160.
Mouawad, Mostafa, Dziong, Zbigniew et El-Ashmawy, Ahmed.
2018.
« Load balancing in 5G C-RAN based on dynamic BBU-RRH mapping supporting IoT communications ».
In 2018 IEEE Global Conference on Internet of Things (GCIoT) (Alexandria, Egypt, Dec. 5-7, 2018)
Piscataway, NJ, USA : IEEE.
Mouawad, Mostafa, Dziong, Zbigniew et Khan, Muhammad.
2018.
« Quality of service aware dynamic BBU-RRH mapping based on load prediction using markov model in C-RAN ».
In IEEE International Conference on Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData) (Halifax, NS, Canada, July 30-Aug. 03, 2018)
pp. 1907-1912.
Institute of Electrical and Electronics Engineers Inc.. Moulins, A., Grosse, G., Esteves, A., Dugnani, R. et Zednik, R.. 2018. « Determining stresses in silicon-based microdevices using fractography ». Affiche présentée lors de la conférence : Nanomaterials for Devices (Montreal, QC, Canada, Sept. 10-12, 2018).
Mouradian, Carla, Naboulsi, Diala, Yangui, Sami, Glitho, Roch H., Morrow, Monique J. et Polakos, Paul A..
2018.
« A comprehensive survey on fog computing: state-of-the-art and research challenges ».
IEEE Communications Surveys and Tutorials, vol. 20, nº 1.
pp. 416-464.
Moussa, Cynthia, Al-Haddad, Kamal, Kedjar, Bachir et Merkhouf, Arezki.
2018.
« Insights into digital twin based on finite element simulation of a large hydro generator ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 553-558.
Piscataway, NJ, USA : IEEE.
Moussaid, Achraf, Jaafar, Wael, Ajib, Wessam et Elbiaze, Halima.
2018.
« Deep reinforcement learning-based data transmission for D2D communications ».
In 14th International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob) (Limassol, Cyprus, Oct. 15-17, 2018)
IEEE Computer Society.
Moutaki, K., Ikaouassen, H., Raddaoui, A., Rezkallah, M. et Chandra, A..
2018.
« Improved Lyapunov function based control approach for single-stage inverter grid interfacing solar photovoltaic system ».
In 19th IEEE International Conference on Industrial Technology (ICIT 2018) (Lyon, France, Feb. 20-22, 2018)
pp. 1000-1005.
Mubarak, Fares, Deslandes, Dominic et Nabki, Frédéric.
25 septembre 2018.
« SPARK Microsystems : réinventer la transmission de données ».
[Article de recherche]. Substance ÉTS.
Mubarak, Fares, Deslandes, Dominic et Nabki, Frédéric.
25 septembre 2018.
« SPARK Microsystems: Reinventing Data Transmission ».
[Article de recherche]. Substance ÉTS.
Muñoz, Mirna, Mejia, Jezreel et Laporte, Claude Y..
2018.
« Implementación del Estándar ISO/IEC 29110 en Centros de Desarrollo de Software de Universidades Mexicanas: Experiencia del Estado de Zacatecas ».
RISTI - Revista Iberica de Sistemas e Tecnologias de Informacao, nº 29.
pp. 43-54.
Muñoz, Mirna, Mejia, Jezreel et Laporte, Claude Y..
2018.
« Reinforcing very small entities using agile methodologies with the ISO/IEC 29110 ».
In Trends and Applications in Software Engineering : Proceedings of the 7th International Conference on Software Process Improvement (CIMPS 2018) (Guadalajara, Mexico, Oct. 17-19, 2018)
Coll. « Advances in Intelligent Systems and Computing », vol. 865.
pp. 88-98.
Springer Verlag.
Murate, K., Javan, M., Ropagnol, X. et Blanchard, F..
2018.
« Pulse front tilt derived from a digital micromirror device and its THz application ».
In 2018 43rd International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz) (Nagoya, Japan, Sept. 9-14, 2018)
IEEE.
Murate, Kosuke, Roshtkhari, Mehraveh Javan, Ropagnol, Xavier et Blanchard, Francois.
2018.
« Adaptive optical pulse front tilt using MEMS mirrors ».
In 2018 Photonics North Conference (PN) (Montreal, QC, Canada, June 5-7, 2018)
IEEE.
Murate, Kosuke, Roshtkhari, Mehraveh Javan, Ropagnol, Xavier et Blanchard, François.
2018.
« Adaptive spatiotemporal optical pulse front tilt using a digital micromirror device and its terahertz application ».
Optics Letters, vol. 43, nº 9.
pp. 2090-2093.
Murrieta-Mendoza, Alejandro, Botez, Ruxandra Mihaela et Bunel, Audric.
2018.
« Four-dimensional aircraft en route optimization algorithm using the artificial bee colony ».
Journal of Aerospace Information Systems, vol. 15, nº 6.
pp. 307-334.
Murrieta-Mendoza, Alejandro, Ternisien, Laurane, Beuze, Bruce et Botez, Ruxandra Mihaela.
2018.
« Aircraft vertical route optimization by beam search and initial search space reduction ».
Journal of Aerospace Information Systems, vol. 15, nº 3.
pp. 157-171.
Mushakhian, Siamak, Ouhimmou, Mustapha et Rönnqvist, Mikael.
2018.
« How the Minimum Number of Periods Between Regeneration Harvests Induces Modeling Mistakes in the Well-Known Model II Forest Management ».
Centre interuniversitaire de recherche sur les réseaux d'entreprise, la logistique et le transport = Interuniversity Research Centre on Enterprise Networks, Logistics and Transportation (CIRRELT). 32 p. Nabki, Frederic, Deslandes, Dominic, Desmarais, Alexandre, Vuong, Anhkiet, Bounif, Anis, Hao, Wang Yu et Pham, William (inventeurs) 26 juin 2018. « Systems relating to ultra wideband broad casting comprising dynamic frequency and bandwidth hopping ». Transfert Plus (titulaire(s)). Brevet américain US 10,009,839.
Naboulsi, Diala, Mermouri, Assia, Stanica, Razvan, Rivano, Herve et Fiore, Marco.
2018.
« On user mobility in dynamic cloud radio access networks ».
In IEEE INFOCOM 2018 - IEEE Conference on Computer Communications (Honolulu, HI, USA, Apr. 15-19, 2018)
pp. 1583-1591.
Piscataway, NJ, USA : IEEE.
Nadeau, Nicholas A. et Bonev, Ilian A..
2018.
« Evolutionary motion control optimization in physical human-robot interaction ».
In 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Madrid, Spain, Oct. 1-5, 2018)
pp. 1347-1353.
Piscataway, NJ, USA : IEEE. Nadeau, S.. 2018. « Towards lean, six sigma, and lean six sigma OHS impacts in universities ». Affiche numéro 26 présentée lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018).
Nadeau, S. et Landau, K..
2018.
« Utility, advantages and challenges of digital technologies in the manufacturing sector ».
Ergonomics International Journal, vol. 2, nº 6.
Nadon, Vincent et Voix, Jérémie. 2018. « Continuous monitoring of otoacoustic emissions : a tool to prevent hearing loss ». Communication lors de la conférence : National Hearing Conservation Association Annual Conference 2018 (Orlando, FL, USA, Feb. 15-17, 2018).
Napon, Frank et Nadeau, Sylvie.
2018.
« Vers une intégration des risques opérationnels, de santé et de sécurité du travail en milieu universitaire ».
In Canada International Conference on Education (CICE) (Toronto, ON, Canada, June 25-28, 2018)
pp. 269-273.
Infonomics Society.
Nassar, M., Guizani, L., Nollet, M. -J. et Tahan, A..
2018.
« Approche probabiliste pour évaluer la fiabilité des ponts isolés à la base, sous l’effet simultané des séismes et de la température en régions froides ».
In 25e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art (Montréal, QC, Canada, 8-9 mai 2018)
Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine.
2018.
« A probabilistic approach to assess seismic base-isolated bridges reliability in cold climate ».
In 11th National Conference on Earthquake Engineering 2018: Integrating Science, Engineering, and Policy (NCEE) (Los Angeles, CA, USA, June 25-29, 2018)
pp. 2773-2777.
Earthquake Engineering Research Institute.
Nastev, Miroslav, Abo-El-Ezz, Ahmad, Smirnoff, Alex, Nollet, Marie-José et McGrath, Heather.
2018.
« Rapid seismic risk assessment at urban scale ».
In 16th European Conference on Earthquake Engineering (Thessaloniki, Greece, June 18-21, 2018)
European Association for Earthquake Engineering.
Nathan, J., Masson, C. et Dufresne, L..
2018.
« Optimal distribution width for ALM in LES for (NEW) MEXICO experiment ».
In The Science of Making Torque from Wind (TORQUE 2018) (Milan, Italy, June 20-22, 2018)
Coll. « Journal of Physics: Conference Series », vol. 1037.
072026.
Nathan, Jörn, Masson, Christian et Dufresne, Louis.
2018.
« Near-wake analysis of actuator line method immersed in turbulent flow using large-eddy simulations ».
Wind Energy Science, vol. 3, nº 2.
pp. 905-917. Nauze, V., Boukherroub, T., Paquet, M. et Olivier, C.. 2018. « Optimizing patient assignment to specialist physicians with considering clinical priority: a case study in a CRDS in Québec ». Communication lors de la conférence : 59th Canadian Operational Research Society Annual Conference (Halifax, NS, Canada, June 4-9, 2018).
Nauze, Vincent, Boukherroub, Tasseda, Paquet, Marc et Olivier, Claude.
2018.
« Optimisation de l’affectation des patients aux médecins spécialistes avec prise en compte de la priorité clinique : cas du CRDS montréalais ».
In 12e Conférence Internationale de Modélisation, Optimisation et SIMulation- MOSIM’18 (Toulouse, France, 27-29 juin 2018)
Nazemi, Faranak, Hamel-Akré, Johann et Bocher, Philippe.
2018.
« Modeling of cementite coarsening during tempering of low-alloyed-medium carbon steel ».
Journal of Materials Science, vol. 53, nº 8.
pp. 6198-6218. Nély, Chloé, Faubert, Jocelyn et Labbé, David. 2018. « Identification des athlètes prédisposés à se rompre le ligament croisé antérieur en situation de jeu ». Affiche présentée lors de la conférence : Journée scientifique REPAR-INTER 2018 (Québec, QC, Canada, 11 mai 2018).
Nemchi, Amina, Bouzidane, Ahmed, Thomas, Marc et Abed, Asma.
2018.
« Performance analysis of four-pad hydrostatic squeeze film dampers loaded between pads under laminar and turbulent flow conditions ».
Tribology - Materials, Surfaces and Interfaces, vol. 12, nº 2.
pp. 59-70.
Nesi, Lucas L., Pillon, Mauricio A., De Assuncao, Marcos D., Miers, Charles C. et Koslovski, Guilherme P..
2018.
« Tackling virtual infrastructure allocation in cloud data centers: A GPU-accelerated framework ».
In 14th International Conference on Network and Service Management (CNSM) and Workshops, 1st International Workshop on High-Precision Networks Operations and Control (HiPNet) and 1st Workshop on Segment Routing and Service Function Chaining (SR+SFC) (Rome, Italy, Nov. 05-09, 2018)
pp. 191-197.
Institute of Electrical and Electronics Engineers Inc..
Nesi, Lucas Leandro, Pillon, Mauricio Aronne, Dias de Assuncao, Marcos et Koslovski, Guilherme Piegas.
2018.
« GPU-accelerated algorithms for allocating virtual infrastructure in cloud data centers ».
In 18th IEEE/ACM International Symposium on Cluster, Cloud and Grid Computing (CCGRID) (Washington, DC, USA, May 01-04, 2018)
pp. 364-365.
Institute of Electrical and Electronics Engineers Inc..
Neto, José Leal D., Yu, Se-Young, Macedo, Daniel F., Nogueira, José Marcos S., Langar, Rami et Secci, Stefano.
2018.
« ULOOF: A user level online offloading framework for mobile edge computing ».
IEEE Transactions on Mobile Computing, vol. 17, nº 11.
pp. 2660-2674.
Nezami, Mohammadreza Sanadgol, Radi, Bahaa, Gour, Amit, Xiong, Yule, Taherzadeh-Sani, Mohammad, Menard, Michaël, Nabki, Frederic et Liboiron-Ladouceur, Odile.
2018.
« Integrated RF passive low-pass filters in silicon photonics ».
IEEE Photonics Technology Letters, vol. 30, nº 23.
pp. 2052-2055. Ngo, Anh Dung, Khay, Mohamed et Deluy, Marc-Claudel. 2018. « Experimental investigation of operational conditions effects on axial fatigue behaviour of carbonepoxy plain wave laminates containing atificial flaw ». Communication lors de la conférence : 2018 9th International Conference on Mechanical and Aerospace Engineering (ICMAE) (Budapest, Hungary, July 10-13, 2018). Ngô, V., Nadeau, S. et Hallé, S.. 2018. « Usability testing for ergonomic criteria matrix: case study of a deep cooling vest ». Communication lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018).
Nguyen, A. Q., Amrhar, A., Zambrano, J., Brown, G., Landry, R. Jr et Yeste-Ojeda, O. A..
2018.
« Application of PSK modulation for secure ADS-B avionics ».
In AIAA Aviation Forum (Atlanta, GA, USA, June 25-29, 2018)
Coll. « AIAA paper », vol. AIAA-2018-3261.
AIAA.
Nguyen, A.-Q., Amrhar, A., Zambrano, J., Brown, G., Landry, R. Jr. et Yeste, O..
2018.
« Application of phase modulation enabling secure automatic dependent surveillance-broadcast ».
Journal of Air Transportation, vol. 26, nº 4.
pp. 157-170.
Nguyen, Anh-Quang, Amrhar, Abdessamad, Kisomi, Alireza Avakh, Fang, Xiaoxing et Landry, René Jr.
2018.
« In-flight performance analysis of direct RF sampling architecture applied to VHF band avionics ».
In IEEE Aerospace Conference (Big Sky, MT, USA, Mar. 03-10, 2018)
IEEE.
Nguyen, Anh-Quang, Amrhar, Abdessamad et Landry, René Jr..
2018.
« Direct RF sampling avionics architecture for future multi-system integrated avionics ».
In 2018 16th IEEE International New Circuits and Systems Conference (NEWCAS) (Montreal, QC, Canada, June 24-27, 2018)
pp. 61-65.
Piscataway, NJ, USA : IEEE.
Nguyen, Anh-Quang, Amrhar, Abdessamad, Zhang, Eric, Zambrano, Joe et Landry, René Jr.
2018.
« In-flight performance analysis of a wideband radio using SDR for avionic applications ».
In 2018 IEEE/AIAA 37th Digital Avionics Systems Conference (DASC) (London, UK, Sept. 23-27, 2018)
Piscataway, NJ, USA : IEEE.
Nguyen, A-Q., Amrhar, A., Zambrano, J., Brown, G., Yeste-Ojeda, O. A. et Landry, R. Jr..
2018.
« Application of PSK modulation in ADS-B 1090 extended squitter authentication ».
[Article de conférence]. International Journal of Aerospace and Mechanical Engineering, vol. 12, nº 3.
pp. 238-249.
Nguyen, Duong Tuan, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« NFV-based architecture for the interworking between WebRTC and IMS ».
IEEE Transactions on Network and Service Management, vol. 15, nº 4.
pp. 1363-1377. Nguyen, H.-C., Pham, X-T. et Jahazi, M.. 2018. « Implementing phase-field ductile fracture model for aluminum welded joint ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).
Nguyen, Hoan Huy, Champliaud, Henri et Lê, Van Ngan.
2018.
« Dynamic finite element modeling of metal spinning process with a stationary mandrel and a rotating tool ».
In 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018)
pp. 91-96.
Dime University of Genoa.
Nguyen, Huyen T. T., Rodríguez, César, Sousa, Marcelo, Coti, Camille et Petrucci, Laure.
2018.
« Quasi-optimal partial order reduction ».
In Computer Aided Verification : 30th International Conference, CAV (Oxford, United Kingdom, July 14-17, 2018)
Coll. « Lecture Notes in Computer Science », vol. 10982.
pp. 354-371.
Springer. Nguyen, Kim Khoa. 2018. « AI for smart city management, open lab & university-as-a-hub model ». Communication lors de la conférence : AI4Life (Hanoi, Vietnam, May 09-11, 2018). Nguyen, Kim Khoa. 2018. « Sustainable operationalization of smart city IoT network fabric ». Communication lors de la conférence : Entretiens Jacques Cartier 2018 (EJC) (Lyon, France, Nov. 12-13, 2018).
Nguyen Ngoc, T. T., Kaddoum, Georges et Gagnon, Francois.
2018.
« Implementation of a chaotic true random number generator based on fuzzy modeling ».
In 2018 16th IEEE International New Circuits and Systems Conference (NEWCAS) (Montreal, QC, Canada, June 24-27, 2018)
pp. 238-242.
IEEE.
Nguyen, Thi Hong Dang et Dao, Thien-My.
2018.
« New framework to optimise leagile supply chain design ».
In Proceedings of the International Conference on Industrial Engineering and Operations Management (Paris, France, July 26-27, 2018)
IEOM Society International.
Nguyen, Thi Hong Dang et Dao, Thien-My.
2018.
« New framework to optimise leagile supply chain design ».
In 13th International Congress on Logistics and SCM Systems (ICLS 2018) (Ho Chi Minh City, Vietnam, July 29-Aug. 01, 2018)
pp. 328-336.
Nguyen, Thien Vuong, Le, Xuan Hien, Dao, Phi Hung, Decker, Christian et Nguyen-Tri, Phuong.
2018.
« Stability of acrylic polyurethane coatings under accelerated aging tests and natural outdoor exposure: the critical role of the used photo-stabilizers ».
Progress in Organic Coatings, vol. 124.
pp. 137-146.
Nguyen, Tung Ngoc, Fortin Blanchette, Handy et Wang, Ruxi.
2018.
« General impedance representation of passive devices based on measurement ».
IEEE Transactions on Power Electronics, vol. 33, nº 8.
pp. 6699-6709.
Nguyen-Tri, P., Ouellet-Plamondon, C. et Carriere, P..
2018.
« The potential of natural superhydrophobic hollow milkweed fibers ».
In 1st International Conference on New Horizons in Green Civil Engineering (NHICE-01) (Victoria, BC, Canada, Apr. 25-27, 2018)
pp. 454-455.
British Columbia, Canada : University of Victoria.
Nguyen-Tri, Phuong, Nguyen, Tuan Anh, Carrière, Pascal et Cuong, Ngo Xuan.
2018.
« Nanocomposite coatings: preparation, characterization, properties and applications ».
International Journal of Corrosion, vol. 2018.
Nguyen-Tri, Phuong et Ouellet-Plamondon, Claudiane. 2018. « Nanoscale characterization and interfacial crystallization of natural hollow milkweed fibers reinforced PCL/PVC ». Affiche numéro 53 présentée lors de la conférence : 2nd Symposium - Advanced Materials Annual Conference = Conférence Annuelle sur la recherche des matériaux fonctionnels (Montreal, QC, Canada, May 3-4, 2018). Nguyen-Tri, Phuong et Prud’homme, Robert E.. 2018. « AFM-IR analysis at the submicron level of miscible and imisble blends upon crystallization ». Affiche présentée lors de la conférence : Polymer Crystallization Workshop (Genoa, Italy).
Nguyen-Tri, Phuong et Prud'homme, Robert E..
2018.
« Crystallization and segregation behavior at the submicrometer scale of PCL/PEG blends ».
Macromolecules, vol. 51, nº 18.
7266–7273. Nguyen-Tri, Phuong et Prud’homme, Robert E.. 2018. « Nanoscale characterization of miscible and immiscible blends upon crystallization by AFM-IR ». Communication lors de la conférence : 2nd Symposium - Advanced Materials Annual Conference = Conférence Annuelle sur la recherche des matériaux fonctionnels (Montreal, QC, Canada, May 3-4, 2018).
Nguyen-Tri, Phuong et Prud'homme, Robert E..
2018.
« Nanoscale lamellar assembly and segregation mechanism of Poly(3-hydroxybutyrate)/Poly(ethylene glycol) blends ».
Macromolecules, vol. 51, nº 1.
pp. 181-188.
Nguyen-Tri, Phuong, Tuduri, Ludovic, Gauvin, Chantal, Triki, Ennouri et Vu-Khanh, Toan.
2018.
« Swelling behavior of polymeric membranes to metalworking fluids ».
Journal of Applied Polymer Science, vol. 135, nº 3.
Niknam, Seyed Ali, Davoodi, Behnam, Davim, J. Paulo et Songmene, Victor.
2018.
« Mechanical deburring and edge-finishing processes for aluminum partsa review ».
International Journal of Advanced Manufacturing Technology, vol. 95, nº 1-4.
pp. 1101-1125.
Niknam, Seyed Ali, Kouam, Jules, Songmene, Victor et Balazinski, Marek.
2018.
« Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs) ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 62-65.
Elsevier.
Nisol, Bernard, Watson, Sean, Meunier, Anne, Juncker, David, Lerouge, Sophie et Wertheimer, Michael R..
2018.
« Energetics of reactions in a dielectric barrier discharge with argon carrier gas: VI PEG‐like coatings ».
Plasma Processes and Polymers, vol. 15, nº 3.
Niu, Shuangxia et Wang, Qingsong.
2018.
« New developments of electrical machines ».
In
Power Engineering: Advances and Challenges Part B: Electrical Power.
pp. 1-22. Boca Raton : CRC Press.
Nollet, Marie-José, Abo El Ezz, Ahmad, Surprenant, Oliver, Smirnoff, Alex et Nastev, Miroslav.
2018.
« Earthquake magnitude and shaking intensity dependent fragility functions for rapid risk assessment of buildings ».
Geosciences, vol. 8, nº 1.
Nollet, Marie-José, Abo El Ezz, Ahmad, Surprenant, Olivier, Smirnoff, Alex et Nastev, Miroslav.
2018.
« Simplified building fragility functions for regional seismic risk assessment ».
In 11th National Conference on Earthquake Engineering 2018: Integrating Science, Engineering, and Policy (NCEE) (Los Angeles, CA, USA, June 25-29, 2018)
pp. 4017-4021.
Earthquake Engineering Research Institute.
Northon, Stéphane, Boivin, Karine, Laurencelle, Louis, Hagemeister, Nicola et de Guise, Jacques A..
2018.
« Quantification of joint alignment and stability during a single leg stance task in a knee osteoarthritis cohort ».
The Knee, vol. 25, nº 6.
pp. 1040-1050.
Nour, Mhamed, Renaud, Jean et Gardoni, Mickael.
2018.
« Place of caregiver who accompanies a person with Alzheimer's disease or related, what should be their role ».
Advances in Social Sciences Research Journal, vol. 5, nº 10.
pp. 442-451.
Novelli, M., Bocher, P. et Grosdidier, T..
2018.
« Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment ».
Materials Characterization, vol. 139.
pp. 197-207.
Obeidi, Thameur, Larbes, Cherif, Ilinca, Adrian et Kebir, Gul Filiz Tchoketch.
2018.
« Fuzzy logic-based maximum power point tracking for a solar electric vehicle ».
Acta Polytechnica Hungarica, vol. 15, nº 7.
pp. 133-156.
O’Connor, Rory V. et Laporte, Claude Y..
2018.
« An innovative approach to the development of an international software process lifecycle standard for very small entities ».
In
Computer Systems and Software Engineering: Concepts, Methodologies, Tools, and Applications.
pp. 1300-1322. Hershey, PA : IGI Global.
Olaniyan, Richard, Fadahunsi, Olamilekan, Maheswaran, Muthucumaru et Zhani, Mohamed Faten.
2018.
« Opportunistic edge computing: Concepts, opportunities and research challenges ».
Future Generation Computer Systems, vol. 89.
pp. 633-645.
Olivares-Espinosa, Hugo, Breton, Simon-Philippe, Nilsson, Karl, Masson, Christian, Dufresne, Louis et Ivanell, Stefan.
2018.
« Assessment of turbulence modelling in the wake of an actuator disk with a decaying turbulence inflow ».
Applied Sciences, vol. 8, nº 9.
Oliveira, D. V. R., Cavalcanti, G. D. C., Porpino, T. N., Cruz, R. M. O. et Sabourin, R..
2018.
« K-Nearest oracles borderline dynamic classifier ensemble selection ».
In 2018 International Joint Conference on Neural Networks (IJCNN 2018) (Rio de Janeiro, Brazil, July 08-13, 2018)
IEEE.
Oliveira, Daniela, Gardoni, Mickael et Dalkir, Kimiz.
2018.
« Assessing the integration of new types of capital in the three-pillar intellectual capital model ».
In 19th European Conference on Knowledge Management (ECKM 2018) (Padua, Italy, Sept. 06-07, 2018)
pp. 633-641.
Academic Conferences Limited.
Oliveira, Daniela, Gardoni, Mickael et Dalkir, Kimiz.
2018.
« Environmental factors on concept maps design ».
In Product Lifecycle Management to Support Industry 4.0 : 15th IFIP WG 5.1 International Conference (PLM) (Turin, Italy, July 2-4, 2018)
Coll. « IFIP Advances in Information and Communication Technology », vol. 540.
pp. 25-34.
Springer International Publishing.
Oliver, P., Ralchenko, M., Samson, C., Ernst, R. E., McCausland, P. J. A. et West, G. F..
2018.
« Enhanced nondestructive characterization of ordinary chondrites using complex magnetic susceptibility measurements ».
Meteoritics and Planetary Science, vol. 53, nº 3.
pp. 433-447. Olofsson, Nils, Mari, Jean-Luc, Daniel, Marc et de Guise, Jacques A.. 2018. « Estimating 3D deformations in real time using 2D visual information: a Bayesian filter approach ». Communication lors de la conférence : Journées du Groupe de Travail en Modélisation Géométrique (GTMG) (Aix-en-Provence, France, 21-22 mars 2018).
Olory Agomma, R., Vázquez, C., Cresson, T. et De Guise, J..
2018.
« Automatic detection of anatomical regions in frontal X-ray images: Comparing convolutional neural networks to random forest ».
In Progress in Biomedical Optics and Imaging (Houston, TX, USA, Feb. 12-15, 2018)
Coll. « Proceedings of SPIE », vol. 10575.
SPIE. Orseau, S., Huybrechts, N., Tassi, P. et Pham Van Bang, D.. 2018. « Modelling of morphodynamics for the prediction of the under keel clearance in the Gironde estuary, with application to the Port of Bordeaux ». Communication lors de la conférence : 6th International Conference on Estuaries and Coasts (Caen, France, Aug. 20-23, 2018).
Osman, Kawther, Ghommam, Jawhar et Saad, Maarouf.
2018.
« Optimal path planning and tracking for AGV lane merging ».
In 2018 15th International Multi-Conference on Systems, Signals Devices (SSD) (Hammamet, Tunisia, March 19-22, 2018)
pp. 402-407.
IEEE.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2018.
« Joint production and replacement planning for an unreliable manufacturing system subject to random demand and quality ».
[Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 11.
pp. 951-956.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2018.
« Production and replacement policies for a deteriorating manufacturing system under random demand and quality ».
European Journal of Operational Research, vol. 264, nº 2.
pp. 623-636.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2018.
« Stochastic optimal control of random quality deteriorating hybrid manufacturing/remanufacturing systems ».
Journal of Manufacturing Systems, vol. 49.
pp. 172-185.
Oudni, Louiza, Vazquez, Carlos et Coulombe, Stéphane.
2018.
« Motion occlusions for automatic generation of relative depth maps ».
In 2018 25th IEEE International Conference on Image Processing (ICIP) (Athens, Greece, Oct 7-10, 2018)
pp. 1538-1542.
Piscataway, NJ, USA : IEEE.
Ouled Sghaier, Moslem, Hammami, Imen, Foucher, Samuel et Lepage, Richard.
2018.
« Flood extent mapping from time-series sar images based on texture analysis and data fusion ».
Remote Sensing, vol. 10, nº 2.
p. 237.
Ounejjar, Youssef et Al-Haddad, Kamal.
2018.
« New nine-level inverter with self balancing of capacitors voltages ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 4467-4472.
IEEE.
Ounejjar, Youssef, El Gadari, Ayoub, Abarzadeh, Mostafa et Al-Haddad, Kamal.
2018.
« PWM sensor-less balancing technique for the fifteen-level puc converter ».
In 2018 IEEE Electrical Power and Energy Conference (EPEC) (Toronto, ON, Canada, Oct. 10-11, 2018)
Institute of Electrical and Electronics Engineers Inc..
Ounifi, Hibat-Allah, Liu, Xu, Gherbi, Abdelouahed, Lemieux, Yves et Li, Wubin.
2018.
« Model-based approach to data center design and power usage effectiveness assessment ».
In The 9th International Conference on Emerging Ubiquitous Systems and Pervasive Networks (EUSPN-2018) / The 8th International Conference on Current and Future Trends of Information and Communication Technologies in Healthcare (ICTH-2018) (Leuven, Belgium, Nov. 5-8, 2018)
Coll. « Procedia Computer Science », vol. 141.
pp. 143-150.
Elsevier B.V..
Pajic, Jelena, Rivera, José, Zhang, Kaiwen et Jacobsen, Hans-Arno.
2018.
« EVA: Fair and auditable electric vehicle charging service using blockchain ».
In DEBS 2018 - Proceedings of the 12th ACM International Conference on Distributed and Event-based Systems (Hamilton, New Zealand, June 25-29, 2018)
pp. 262-265.
New-York, NY, USA : ACM.
Pantoja, Francisco G., Songmene, Victor, Kenné, Jean-Pierre, Olufayo, Oluwole A. et Ayomoh, Michael.
2018.
« Development of a tool cost optimization model for stochastic demand of machined products ».
Applied Mathematics, vol. 9, nº 12.
pp. 1395-1423.
Pappas, Georgios, Joncas, Simon, Michaud, Véronique et Botsis, John.
2018.
« The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part I Experimental results ».
Composite Structures, vol. 184.
pp. 924-934.
Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, H..
2018.
« A numerical comparison of solar evaporators: Thermal, photovoltaic and hybrid PV/T absorber plates ».
In Proceedings of the 16th International Heat Transfer Conference (IHTC 16) (Beijing, China, Aug. 10-15, 2018)
pp. 7355-7362.
Bergell House. Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, H.. 2018. « Un évaporateur PV/T hybride au CO2 : une étude expérimentale ». Affiche numéro 112 présentée lors de la conférence : Congrès Annuel de la Société Française de Thermique (SFT) (Pau, France, 29 mai-1er juin 2018). Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, H.. 2018. « Un évaporateur PV/T hybride au CO2 : une étude numérique ». Affiche numéro 108 présentée lors de la conférence : Congrès Annuel de la Société Française de Thermique (SFT) (Pau, France, 29 mai-1er juin 2018).
Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, Hakim.
2018.
« A hybrid PV/T solar evaporator using CO2: Numerical heat transfer model and simulation results ».
Solar Energy, vol. 170.
pp. 1118-1129.
Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, Hakim.
12 novembre 2018.
« Improving Heat Pump Performance with Solar Energy ».
[Article de recherche]. Substance ÉTS.
Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, Hakim.
12 novembre 2018.
« L’énergie solaire pour améliorer les performances des pompes à chaleur ».
[Article de recherche]. Substance ÉTS.
Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis, Nesreddine, Hakim et Talbot, Marie-Hélène.
2018.
« One-dimensional model of a stratified thermal storage tank with supercritical coiled heat exchanger ».
Applied Thermal Engineering, vol. 134.
pp. 379-395.
Pascoal Junior, Jairo, Valverde Arrotéia, Aline, Assunção, Anderson, Santos, Toledo Eduardo et Melhado, Silvio Burrattino.
2018.
« Análise de casos práticos da adoção do processo BIM em empreendimentos de infraestrutura ».
In 4o Congresso Brasileiro de Túneis e Estruturas Subterrâneas (São Paulo, Brasil, Apr. 03-05, 2017)
CBTES.
Paz, Andrés et El Boussaidi, Ghizlane.
2018.
« Building a software requirements specification and design for an avionics system: An experience report ».
In 33rd Annual ACM Symposium on Applied Computing (SAC 2018) (Pau, France, Apr. 09-13, 2018)
pp. 1262-1271.
Paz, Andres et El Boussaidi, Ghizlane.
5 décembre 2018.
« Developing Avionics Software ».
[Article de recherche]. Substance ÉTS.
Paz, Andres et El Boussaidi, Ghizlane.
5 décembre 2018.
« La création de logiciels d’avionique ».
[Article de recherche]. Substance ÉTS.
Pellan Cheng, Alexandre, Burnham, Philip et De Vlaminck, Iwijn.
2018.
« Biopsy-free screening for glioma ».
EMBO molecular medicine, vol. 10, nº 12.
Pellegrino, Giovanni, Hedrich, Tanguy, Chowdhury, Rasheda Arman, Hall, Jeffery A., Dubeau, Francois, Lina, Jean-Marc, Kobayashi, Eliane et Grova, Christophe.
2018.
« Clinical yield of magnetoencephalography distributed source imaging in epilepsy: A comparison with equivalent current dipole method ».
Human Brain Mapping, vol. 39, nº 1.
pp. 218-231.
Peng, Jizong, Desrosiers, Christian et Pedersoli, Marco.
2018.
« DC-SegNet: a discretely constrained deep network for weakly supervised segmentation ».
In 32nd Conference on Neural Information Processing Systems (NIPS 2018) - Medical Imaging Meets NIPS Workshop (MED-NEURIPS 2018) (Montreal, QC, Canada, Dec. 08, 2018)
Pereira, Marcelo T., Britto Jr., Alceu S., Oliveira, Luiz S. et Sabourin, Robert.
2018.
« Dynamic ensemble selection by k-nearest local oracles with discrimination index ».
In 2018 IEEE 30th International Conference on Tools with Artificial Intelligence (ICTAI) (Volos, Greece, Nov. 5-7, 2018)
pp. 765-771.
Los Alamitos, CA, USA : IEEE Computer Society.
Pérez-Sánchez, A., Yánez, A., Cuadrado, A., Martel, O. et Nuño, N..
2018.
« Fatigue behaviour and equivalent diameter of single Ti-6Al-4V struts fabricated by electron beam melting orientated to porous lattice structures ».
Materials and Design, vol. 155.
pp. 106-115.
Perraton, Daniel, Di Benedetto, Hervé, Sauzeat, Cedric, Nguyen, Quang Tuan et Pouget, Simon.
2018.
« Three-dimensional linear viscoelastic properties of two bituminous mixtures made with the same binder ».
Journal of Materials in Civil Engineering, vol. 30, nº 11.
Pestana, Miguel, Sanjosé, Marlène, Moreau, Stéphane, Roger, Michel et Gruber, Mathieu.
2018.
« Investigation on the noise of an axial low Mach-number fan stage with a heterogeneous stator ».
In FAN 2018 - International Conference on Fan Noise, Aerodynamics, Applications and Systems (Darmstadt, Germany, Apr. 18-20, 2018)
Petrillo, Fabio, Merle, Philippe, Palma, Francis, Moha, Naouel et Guéhéneuc, Yann-Gäel.
2018.
« A lexical and semantical analysis on REST cloud computing APIs ».
In Cloud Computing and Service Science : 7th International Conference, CLOSER : Revised Selected Papers (Porto, Portugal, Apr. 24–26, 2017)
Coll. « Communications in Computer and Information Science », vol. 864.
pp. 308-332.
Springer Verlag.
Peykani, Pejman, Mohammadi, Emran, Pishvaee, Mir Saman, Rostamy-Malkhalifeh, Mohsen et Jabbarzadeh, Armin.
2018.
« A novel fuzzy data envelopment analysis based on robust possibilistic programming: Possibility, necessity and credibility-based approaches ».
RAIRO - Operations Research, vol. 52, nº 4.
pp. 1445-1463. Pham Van Bang, D., Brisset, P. et Nguyen, K. D.. 2018. « Sedimentation and compaction of fine sediment ». Communication lors de la conférence : 20th International Sedimentological Congress (Quebec City, QC, Canada, June 13-17, 2018).
Pham, Chuan, Nguyen, Duong Tuan, Nguyen, H. Tran, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« Dynamic controller/switch mapping in virtual networks service chains ».
In 2018 IEEE Global Communications Conference (GLOBECOM) (Abu Dhabi, United Arab Emirates, Dec. 9-13, 2018)
Piscataway, NJ, USA : IEEE.
Pham, Chuan, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« An approximation mechanism for elastic IoT application deployment ».
In 9th IEEE Annual Ubiquitous Computing, Electronics & Mobile Communication Conference (UEMCON) (New York City, NY, USA, Nov. 08-10, 2018)
pp. 159-165.
Piscataway, NJ, USA : IEEE.
Pham, Chuan, Tran, Nguyen H., Ren, Shaolei, Seon Hong, Choong, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« A distributed approach to emergency demand response in geo-distributed mixed-use buildings ».
Journal of Building Engineering, vol. 19.
pp. 506-518.
Pham, Dang-Kièn Germain, Gagnon, Ghyslain, Gagnon, François, Kaddoum, Georges, Jabbour, Chadi et Desgreys, Patricia.
2018.
« FFT-based limited subband digital predistortion technique for ultra wideband 5G systems ».
In 2018 16th IEEE International New Circuits and Systems Conference (NEWCAS) (Montréal, QC, Canada, June 24-27, 2018)
pp. 10-13.
IEEE.
Picard, François et Miresco, Edmond.
2018.
« Identifying high-probability buy signals ».
Technical Analysis of Stocks & Commodities, vol. 36, nº 13.
pp. 8-12.
Piché, Paul, Gibout, Stéphane, Haillot, Didier, Arrabie, Cédric, Lamalice, Annie, Rousse, Daniel et Py, Xavier.
2018.
« Modélisation thermique d’une serre en milieu circumpolaire : étude initiale ».
In 26e congrès de la Société française de thermique (SFT 2018) (Pau, France, 29 mai-1er juin 2018)
pp. 919-926.
Pirnia, Pouyan, Duhaime, François et Manashti, Javad.
2018.
« Machine learning algorithms for applications in geotechnical engineering ».
In Geo Edmonton : the 71st Canadian Geotechnical Conference and the 13th Joint CGS/IAH-CNC Groundwater Conference (Edmonton, AB, Canada, Sept. 23-26, 2018)
Planckaert, Célia, Larose, Gabriel, Ranger, Pierre, Lacelle, Marc, Fuentes, Alexandre et Hagemeister, Nicola.
2018.
« Total knee arthroplasty with unexplained pain: new insights from kinematics ».
Archives of Orthopaedic and Trauma Surgery, vol. 138, nº 4.
pp. 553-561.
Ploeger, S. K., Nollet, M-J., Sawada, M. et Abo El Ezz, A..
2018.
« Inventory models for regional-scale natural hazards risk assessment ».
Coll. « Geological Survey of Canada = Commission géologique du Canada », vol. Dossier public 8402.
Natural Resources Canada = Ressources natuerlles Canada. 43 p.
Poirier, Erik A..
2018.
« Building SMARTer : an introduction to open BIM as the foundation for a Canadian National BIM Standard ».
CanBim Innovation Spotlight : Projection sur l'innovation, vol. 2.
pp. 19-21.
Poirier, Erik A., Frénette, Sébastien, Carignan, Vincent, Paris, Hugues et Forgues, Daniel.
2018.
« Accroître la performance de la filière québécoise de la construction par le virage numérique: Étude sur le déploiement des outils et des pratiques de la modélisation des données du bâtiment au Québec ».
BIM Québec. 115 p.
Poirier, Erik A., Moore, Bill et Keenliside, Susan.
2018.
« Developing and open BIM Ecosystem: The collaborative path towards true interoperability ».
CanBim Innovation Spotlight : Projection sur l'innovation, vol. 3.
pp. 18-19.
Politowski, Cristiano, Fontoura, Lisandra M., Petrillo, Fabio et Guéhéneuc, Yann-Gaël.
2018.
« Learning from the past: A process recommendation system for video game projects using postmortems experiences ».
Information and Software Technology, vol. 100.
pp. 103-118.
Polkowski, Wojciech, Sobczak, Natalia, Nowak, Rafal, Kudyba, Artur, Bruzda, Grzegorz, Polkowska, Adelajda, Homa, Marta, Turalska, Patrycja, Tangstad, Merete, Safarian, Jafar, Moosavi-Khoonsari, Elmira et Datas, Alejandro.
2018.
« Wetting behavior and reactivity of molten silicon with h-BN substrate at ultrahigh temperatures up to 1750C ».
Journal of Materials Engineering and Performance, vol. 27, nº 10.
pp. 5040-5053.
Polotski, Vladimir et Beauregard, Yvan.
2018.
« Work-time identification and effort assessment: Application to fenestration industry and case study? ».
[Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 15.
pp. 569-574.
Poulin, J. R., Brailovski, V. et Terriault, P..
2018.
« Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions ».
International Journal of Fatigue, vol. 116.
pp. 634-647.
Pouliot, Robert C., Katsanis, Constantine John et Katsanis, Alexander.
2018.
« Horizon 2020 transcended: the redesign of the AEC organization ».
In EPOC 2018 – (Re)Organizing in an Uncertain Climate (Brijuni, Croatia, June 25-27, 2018)
pp. 645-703.
Engineering Project Organization Conference. Pourzandi, Makan, Fekih Ahmed, Mohamed, Cheriet, Mohamed et Talhi, Chamseddine (inventeurs) 6 mars 2018. « Multi-tenant isolation in a cloud environment using software defined networking ». Telefonaktiebolaget LM Ericsson (titulaire(s)). Brevet américain US 9,912,582.
Pradhan, Prabin, Sengupta, Dipankar, Tremblay, Christine et Ung, Bora.
2018.
« Generation of cylindrical vector beams using long period fiber gratings in few-mode fiber ».
In 2018 Photonics North (PN 2018) (Montréal, QC, Canada, June 05-07, 2018)
IEEE.
Pradhan, Prabin, Sharma, Manish et Ung, Bora.
2018.
« Generation of perfect cylindrical vector beams with complete control over the ring width and ring diameter ».
IEEE Photonics Journal, vol. 10, nº 1.
Pradhan, Prabin et Ung, Bora.
29 mai 2018.
« Generating and Characterizing Cylindrical Vector beams ».
[Article de recherche]. Substance ÉTS.
Pradhan, Prabin et Ung, Bora.
29 mai 2018.
« La génération et caractérisation des faisceaux cylindriques vectoriels ».
[Article de recherche]. Substance ÉTS.
Qiu, Cindy X., Shih, Ishiang, Qiu, Chunong, Shih, Andy, Qiu, Julia et Shih, Yi-Chi (inventeurs) 27 mars 2018. « Tunable film bulk acoustic resonators and filters with integrated biasing resistors ». Brevet américain US 9,929,718. Qiu, Cindy X., Shih, Ishiang, Qiu, Chunong, Shih, Andy, Qiu, Julia et Shih, Yi-Chi (inventeurs) 27 février 2018. « Tunable surface acoustic wave resonators and filters ». Brevet américain US 9,906,206.
Quant, L., Diarce, G., Campos-Celador, A., Garcia-Romero, A. et Haillot, D..
2018.
« A thermal stability study of the urea-sodium nitrate eutectic mixture as a PCM ».
In 12th IIR/IIF International Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning (PCM 2018) (Orford, QC, Canada, May 21-23, 2018)
Coll. « Refrigeration Science and Technology »
pp. 334-339.
International Institute of Refrigeration.
Raee, Vahid Maleki, Naboulsi, Diala et Glitho, Roch.
2018.
« Energy efficient task assignment in virtualized wireless sensor networks ».
In IEEE Symposium on Computers and Communications (ISCC) (Natal, Brasil, June 25-28, 2018)
00976-00979.
Piscataway, NJ, USA : IEEE.
Rageh, Mohamed, Ndtoungou, Auguste, Hamadi, Abdelhamid et Al-Haddad, Kamal.
2018.
« Railway traction supply with PV integration for power quality issues ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 1436-1441.
IEEE.
Rahimi Komijania, H, Shahin, M. et Jabbarzadeh, A..
2018.
« Optimal policy of condition-based maintenance considering probabilistic logistic times and environmental contamination issues ».
International Journal of Engineering, Transactions B: Applications, vol. 31, nº 2.
pp. 357-364.
Rahmani, Mohammad Hassan et Deslandes, Dominic.
2018.
« Circularly polarised periodic leaky-wave antenna with filtering capability ».
IET Microwaves, Antennas and Propagation, vol. 12, nº 11.
pp. 1811-1815.
Ralchenko, M., Samson, C., Holladay, Scott et Polowick, Chris.
2018.
« Towards an unmanned airborne platform for electromagnetic geophysical surveying ».
In 88th Society of Exploration Geophysicists International Exposition and Annual Meeting (SEG) (Anaheim, CA, USA, Oct. 14-19, 2018)
pp. 1838-1842.
Society of Exploration Geophysicists.
Ralchenko, M., Svilans, M., Samson, C., Walsh, C. et Roper, M..
2018.
« Optimization of through-the-Earth radio communications via mine overburden conductivity estimation ».
Mining Engineering, vol. 70, nº 7.
pp. 113-120.
Ralchenko, Maxim, Roper, Mike, Samson, Claire et Svilans, Markus.
2018.
« Near-field VLF electromagnetic signal propagation in multistory buildings ».
IEEE Transactions on Antennas and Propagation, vol. 66, nº 2.
pp. 848-856.
Ramachandran, Sirinivasan, Ghafourzadeh, Donya, de Lasa, Martin, Popa, Tiberiu et Paquette, Éric.
2018.
« Joint planar parameterization of segmented parts and cage deformation for dense correspondence ».
Computers and Graphics, vol. 74.
pp. 202-212. Rampa, R. et Agogué, M.. 2018. « Developing radical innovation capabilities: the unexpected effects of training employees for creativity and innovation ». Communication lors de la conférence : 25th IPDMC: Innovation and Product Development Management Conference (Porto, Portugal, June 10-13, 2018). Rampa, R. et Agogué, M.. 2018. « Démarches d’exploration et innovation collective: Le rôle des communautés de pratiques ». Communication lors de la conférence : 3rd Abbé Grégoire Innovation Days (Paris, France, Apr. 03-04, 2018). Rampa, Romain, Cohendet, Patrick, Simon, Laurent et Manent, Margaux. 2018. « The dynamics of local innovation ecosystems: the case of video games in Montreal ». Communication lors de la conférence : Neuvièmes Journées du Groupe Thématique Innovation de l’AIMS : « Communautés, écosystèmes et innovation » (Montreal, QC, Canada, 17-19 oct. 2018).
Randriamasinoro, Njakarison Menja, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« Optimized resource allocation in edge-cloud environment ».
In 2018 Annual IEEE International Systems Conference (SysCon) (Vancouver, BC, Canada, Apr. 23-26, 2018)
Piscataway, NJ, USA : IEEE.
Raoofat, M., Saad, M., Lefebvre, S., Asber, D., Mehrjedri, H. et Lenoir, L..
2018.
« Wind power smoothing using demand response of electric vehicles ».
International Journal of Electrical Power and Energy Systems, vol. 99.
pp. 164-174. Raschia, Simone, Badeli, Saeed, Carter, Alan, Perraton, Daniel et Graziani, Andrea. 2018. « Recycled glass filler in cold recycled materials treated with bituminous emulsion ». Affiche présentée lors de la conférence : TRB 2018 Annual Meeting (Washington, DC, USA, Jan. 7-11, 2018).
Rayani, Marsa, Naboulsi, Diala, Glitho, Roch et Elbiaze, Halima.
2018.
« Slicing virtualized EPC-based 5G core network for content delivery ».
In IEEE Symposium on Computers and Communications (ISCC) (Natal, Brasil, June 25-28, 2018)
pp. 726-729.
Piscataway, NJ, USA : IEEE.
Reategui, Ruth et Ratte, Sylvie.
2018.
« Automatic extraction and aggregation of diseases from clinical notes ».
In International Conference on Information Technology and Systems (ICITS18) (Libertad city, Ecuador, Jan. 11-13, 2017)
Coll. « Advances in Intelligent Systems and Computing », vol. 721.
pp. 846-855.
Springer Verlag.
Reátegui, Ruth et Ratté, Sylvie.
2018.
« Comparison of MetaMap and cTAKES for entity extraction in clinical notes ».
BMC Medical Informatics and Decision Making, vol. 18, nº supp. 3.
Reátegui, Ruth, Ratté, Sylvie, Bautista-Valarezo, Estefanía et Duque, Victor.
2018.
« Obesity cohorts based on comorbidities extracted from clinical notes ».
In WorldCIST'18 : World Conference on Information Systems and Technologies : Trends and Advances in Information Systems and Technologies (Naples, Italy, Mar. 27-29, 2018)
Coll. « Advances in Intelligent Systems and Computing », vol. 746.
pp. 1121-1131.
Springer.
Rehouma, Haythem, Noumeir, Rita, Bouachir, Wassim, Jouvet, Philippe et Essouri, Sandrine.
2018.
« 3D imaging system for respiratory monitoring in pediatric intensive care environment ».
Computerized Medical Imaging and Graphics, vol. 70.
pp. 17-28.
Reimeringer, Michael, Nuño, Natalia et Morin, Suzanne.
2018.
« Atypical femur fractures: influence of the femoral neck shaft angle and lateral bowing on maximum principal strains within the femur ».
[Résumé d'une communication à une conférence]. Journal of Bone and Mineral Research, vol. 33, nº Suppl. 1.
S187.
Renaud, Jean, Houssin, Rémy, Gardoni, Mickaël et Nour, Mhamed.
2018.
« Multi-users of a product: Emergence of contradictions ».
In Automated Invention for Smart Industries : 18th International TRIZ Future Conference, TFC 2018 (Strasbourg, France, Oct. 29-31, 2018)
Coll. « IFIP Advances in Information and Communication Technology », vol. 541.
pp. 154-164.
Springer New York LLC.
Rezabeigi, Ehsan, Wood-Adams, Paula M. et Demarquette, Nicole R..
2018.
« Complex morphology formation in electrospinning of binary and ternary poly(lactic acid) solutions ».
Macromolecules, vol. 51, nº 11.
pp. 4094-4107.
Rezaei, Ali et Izquierdo, Ricardo.
2018.
« Rapid prototyping of microfluidic devices and their applications ».
In 16th IEEE International New Circuits and Systems Conference (NEWCAS) (Montreal, QC, Canada, June 24-27, 2018)
pp. 385-389.
Institute of Electrical and Electronics Engineers Inc..
Rezkallah, M., Chandra, A., Saad, M., Tremblay, M., Singh, B., Singh, S. et Ibrahim, H..
2018.
« Composite control strategy for a PV-Wind-Diesel based off-grid power generation system supplying unbalanced non-linear loads ».
In 2018 IEEE Industry Applications Society Annual Meeting (IAS) (Portland, OR, USA, Sept. 23-27, 2018)
IEEE.
Rezkallah, Miloud, Hamadi, Ab, Chandra, Ambrish et Singh, Bhim.
2018.
« Design and implementation of active power control with improved P&O method for wind-pv-battery based standalone generation system ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 7.
pp. 5590-5600.
Režnáková, Marta, Tencer, Lukas et Cheriet, Mohamed.
2018.
« Elastic memory learning for fuzzy inference models ».
Applied Soft Computing, vol. 67.
pp. 1-7.
Riekstin, Ana Carolina, Rodrigues, Bruno Bastos, Nguyen, Kim Khoa, Carvalho, Teresa Cristina Melo De Brito, Meirosu, Catalin, Stiller, Burkhard et Cheriet, Mohamed.
2018.
« A survey on metrics and measurement tools for sustainable distributed cloud networks ».
IEEE Communications Surveys and Tutorials, vol. 20, nº 2.
pp. 1244-1270.
Rimpault, X., Chatelain, J-F. et Balazinski, M..
2018.
« Fractal analysis applications for improving monitoring and prediction systems in machining ».
In 7th International Conference on Virtual Machining Process Technology (VMPT 2018) (Hamilton, ON, Canada, May 07-09, 2018)
Rimpault, Xavier, Balazinski, Marek et Chatelain, Jean-François.
2018.
« Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0 ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
Rimpault, Xavier, Il, Alexandre, Chatelain, Jean-François, Lalonde, Jean-François et Balazinski, Marek.
2018.
« Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 417-420.
Elsevier.
Rioux, Marc-Denis, Nollet, Marie-José, Leboeuf, Denis, Koboevic, Sanda et Galy, Bertrand.
2018.
« Direct modelling of dynamic sol-structure interaction by finite elements analysis ».
In 6th International Disaster Mitigation Specialty Conference (Fredericton, NB, Canada, June 13-16, 2018)
pp. 109-118.
Canadian Society for Civil Engineering.
Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Montaño-Arango, Oscar et Hernández-Gress, Eva Selene.
2018.
« Subcontracting strategies with production and maintenance policies for a manufacturing system subject to progressive deterioration ».
International Journal of Production Economics, vol. 200.
pp. 103-118. Rivest, L., Danjou, C. et Pellerin, R.. 2018. « Positionnements stratégiques dans le contexte de l'industrie 4.0 ». Communication lors de la conférence : Table ronde 4.0 CEFRIO Prompt : De la pme 2.0 à l’entreprise 4.0 : la révolution des données (Montreal, QC, Canada, 31 mai 2018). Rivest, Louis, Danjou, Christophe, Lange, Lola et Pellerin, Robert. 2018. « Positionnements stratégiques du vêtement connecté dans le contexte de l’Industrie 4.0 ». Communication lors de la conférence : Wear It Smart (Montreal, QC, Canada, May 10, 2018). Rivest, Louis, Danjou, Christophe et Pellerin, Robert. 2018. « Des pistes pour aborder l’ère du 4.0 ». Communication lors de la conférence : Table d'innovation - Conseil économique et tourisme du Haut-Richelieu (St-Jean sur le Richelieu, QC, Canada, 20 juin 2018).
Roberge, Jean-Philippe, Ruotolo, Wilson, Duchaine, Vincent et Cutkosky, Mark.
2018.
« Improving industrial grippers with adhesion-controlled friction ».
IEEE Robotics and Automation Letters, vol. 3, nº 2.
pp. 1041-1048.
Robichaud, Alexandre, Cicek, Paul-Vahé, Deslandes, Dominic et Nabki, Frederic.
2018.
« Frequency tuning technique of piezoelectric ultrasonic transducers for ranging applications ».
Journal of Microelectromechanical Systems, vol. 27, nº 3.
pp. 570-579.
Robichaud, Alexandre, Deslandes, Dominic, Cicek, Paul-Vahe et Nabki, Frederic.
2018.
« A novel topology for process variation-tolerant piezoelectric micromachined ultrasonic transducers ».
Journal of Microelectromechanical Systems, vol. 27, nº 6.
pp. 1204-1212.
Robin, Olivier, Amédin, Celse Kafui, Atalla, Noureddine, Doutres, Olivier et Sgard, Franck.
2018.
« Méthodologie innovante pour la caractérisation des matériaux acoustiques en laboratoire et étude de son applicabilité sur le terrain ».
Coll. « Rapports Scientifiques », vol. R-1022.
Montréal : IRSST. 119 p.
Rohart, Vincent, Dubé, Martine et Laberge Lebel, Louis.
2018.
« Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ».
In SAMPE Long Beach 2018 Conference and Exhibition; (Long Beach, CA, USA, May 21-24, 2018)
SAMPE.
Rohart, Vincent, Laberge Lebel, Louis et Dubé, Martine.
2018.
« Better Knowledge of Aging Welded Composites ».
[Article de recherche]. Substance ÉTS.
Rohart, Vincent, Laberge Lebel, Louis et Dubé, Martine.
2018.
« Mieux connaître le vieillissement des composites soudés ».
[Article de recherche]. Substance ÉTS.
Rohoden, Katty, Estrada, Rebeca, Otrok, Hadi et Dziong, Zbigniew.
2018.
« Game theoretical framework for clustering and resource allocation in macro-femtocell networks ».
Computer Networks, vol. 138.
pp. 164-176.
Rong, Bo, Zhou, Jiazhen, Kadoch, Michel et Sun, Gui-Ling.
2018.
« Emerging technologies for 5G radio access network: architecture, physical layer technologies, and MAC layer protocols ».
[Éditorial]. Wireless Communications and Mobile Computing, vol. 2018.
Rony, Jérôme, Gustavo, Luiz, Sabourin, Robert et Granger, Eric.
2018.
« Decoupling direction and norm for efficient gradient-based l2 adversarial attacks ».
In NeurIPS 2018 Workshop on Security in Machine Learning (Montreal, QC, Canada, Dec. 7, 2018)
Rosinvil, T., Bouvier, J., Dube, J., Bouchard, M., Gaudreault, P. O., El Gewely, M., Carrier, J. et Lina, J. M..
2018.
« Changes in slow waves density: a matter of aging and sex or an inaccurate detection? ».
[Résumé d'une communication à une conférence]. Journal of Sleep Research, vol. 27, nº Suppl. 1.
p. 91.
Rostami, Borzou, Desaulniers, Guy, Errico, Fausto et Lodi, Andrea.
2018.
« A PCA-based approximation scheme for combinatorial optimization with uncertain and correlated data ».
Coll. « Data Science for Real-Time Decision-Making », vol. DS4DM-2018-004.
Polytechnique Montréal, département de mathématiques et génie industriel.
Rostami, Borzou, Desaulniers, Guy, Errico, Fausto et Lodi, Andrea.
2018.
« The vehicle routing problem with stochastic and correlated travel times ».
Coll. « Data Science for Real-Time Decision-Making », vol. DS4DM-2018-001.
Montréal : Polytechnique Montréal, département de mathématiques et génie industriel.
Rostami, Borzou, Errico, Fausto et Lodi, Andrea.
2018.
« A convex reformulation and an outer approximation for a class of binary quadratic program ».
Coll. « Data Science for Real-Time Decision-Making », vol. DS4DM-2018-002.
Polytechnique Montréal, département de mathématiques et génie industriel.
Roubaud, M. C., Lina, J. M., Carrier, J. et Torresani, B..
2018.
« Space-time extension of the MEM approach for electromagnetic neuroimaging ».
In 2018 IEEE 28th International Workshop on Machine Learning for Signal Processing (MLSP) (Aalborg, Denmark, Sept. 17-20, 2018)
IEEE.
Rouhollah Dermanaki, Farahani, Janier, Mathieu et Dubé, Martine.
2018.
« Conductive films of silver nanoparticles as novel susceptors for induction welding of thermoplastic composites ».
Nanotechnology, vol. 29, nº 12.
Rousse, Daniel, Yan, Charlotte, Glaus, Mathias, Ilinca, Adrian, Ibrahim, Hussein, Chandra, Ambrish, Zednik, Ricardo, Agbossou, Kodjo et Haillot, Didier.
2018.
« Analyse décisionnelle multicritères pour déterminer un système de chauffage de remplacement pour les collectivités éloignées du Nunavik ».
In CIFEM 2018 - Colloque International Francophone en Énergétique et Mécanique : Conference Proceedings (Cotonou, Bénin, 23-25 avril 2018)
pp. 157-162.
Roy, Anandarup, Cruz, Rafael M. O., Sabourin, Robert et Cavalcanti, George D. C..
2018.
« A study on combining dynamic selection and data preprocessing for imbalance learning ».
Neurocomputing, vol. 286.
pp. 179-192.
Roy, Jonathan, Suryn, Witold, Moazzezi Eftekhar, Sara et Terfas, Hebatalla.
2018.
« A methodology for the development of a quality measurement plan for cloud-based applications ».
In 26th International Software Quality Management (SQM) Conference (London, England, Mar. 25, 2018)
pp. 95-110.
Southampton Solent University.
Roy, Jonathan, Suryn, Witold, Moazzezi Eftekhar, Sara et Terfas, Hebatalla.
2018.
« Towards a quality evaluation framework for cloud-based applications ».
In 26th International Software Quality Management (SQM) Conference (London, England, Mar. 25, 2018)
pp. 111-126.
Southampton Solent University.
Saad, Y., Nohra, C., Younes, R., Abboudi, S., Ilinca, A., Ibrahim, H. et Feger, Z..
2018.
« Study of an optimized wind-diesel hybrid system for canadian remote sites ».
In 2017 IEEE Electrical Power and Energy Conference, EPEC 2017 (Saskatoon, SK, Canada, Oct. 22-25, 2017)
Institute of Electrical and Electronics Engineers.
Saad, Y., Younes, R., Abboudi, S. et Ilinca, A..
2018.
« Hydro-pneumatic storage for wind-diesel electricity generation in remote sites ».
Applied Energy, vol. 231.
pp. 1159-1178. Saberi-Derakhtenjani, Ali, D'Avignon, Katherine et Athienitis, Andreas K.. 2018. « Development of a predictive control methodology for a hydronic de-icing system for urban infrastructure ». Communication lors de la conférence : ITS World Congress 2018 (Copenhagen, Denmark, Sept. 17-21, 2018).
Saberi-Derakhtenjani, Ali, D'Avignon, Katherine et Athienitis, Andreas K..
2018.
« Development of a predictive control methodology for a hydronic de-icing system for urban infrastructure ».
In 25th ITS World Congress 2018 (Copenhagen, Denmark, Sept. 17-21, 2018)
Saboktakin, A., Vu-Khanh, T., Butun, V. et Pantyukhov, P..
2018.
« Characteristics of tufted preforms subjected to different mechanical loading for aerospace applications ».
FME Transactions, vol. 46, nº 2.
pp. 224-229.
Sadeghian Sharif, Nastaran, Pishvaee, Mir Saman, Aliahmadi, Alireza et Jabbarzadeh, Armin.
2018.
« A bi-level programming approach to joint network design and pricing problem in the municipal solid waste management system: A case study ».
Resources, Conservation and Recycling, vol. 131.
pp. 17-40.
Sadeghian, Armin, Belgacem, Chabi et Hassan, Munzer.
2018.
« Évaluation de la capacité portante des connexions à tourillons dans les ponts d’acier en treillis ».
In 25e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art (Québec, QC, Canada, 8-9 mai 2018)
Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor.
2018.
« A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions ».
International Journal of Advanced Manufacturing Technology, vol. 96, nº 9-12.
pp. 3747-3791.
Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor.
2018.
« Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel ».
International Journal of Advanced Manufacturing Technology, vol. 94, nº 5-8.
pp. 2457-2474.
Saidi, M. N., Songmene, V., Kouam, J. et Bahloul, A..
2018.
« Rotational and translation-free polishing of granite: surface quality and dust particles emission and dispersion ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 1-4.
pp. 289-303.
Saied, Mohamed Aymen, Ouni, Ali, Sahraoui, Houari, Kula, Raula Gaikovina, Inoue, Katsuro et Lo, David.
2018.
« Improving reusability of software libraries through usage pattern mining ».
Journal of Systems and Software, vol. 145.
pp. 164-179.
Saint-Louis, Patrick et Lapalme, James.
2018.
« An exploration of the many ways to approach the discipline of enterprise architecture ».
International Journal of Engineering Business Management, vol. 10.
Saint-Pierre Cote, S., Labbe, D. R., Chartier, S. et Renaud, P.. 2018. « How customization of the virtual environment affects sexual presence in men and women ». Affiche présentée lors de la conférence : 3rd International Conference on Forensic Psychology and Criminology (Stockholm, Sweden, Aug. 16-17, 2018).
Saint-Pierre Côté, Sara, Labbé, David R., Chartier, Sylvain et Renaud, Patrice.
2018.
« First steps toward an objective measurement of sexual presence in males and females ».
In 23rd Annual CyberPsychology, CyberTherapy & Social Networking Conference(CyPsy) (Gatineau, QC, Canada, June 26-28, 2018)
Saint-Pierre Côté, Sara, Labbé, David et Renaud, Patrice. 2018. « Développement d’une mesure objective et automatisée de la présence sexuelle face à des stimuli virtuels immersif pour le diagnostic et le traitement des déviances sexuelles ». Affiche présentée lors de la conférence : Journée Scientifique REPAR-INTER 2018 (Québec, QC, Canada, 11 mai 2018).
Saito, Y., Kubicki, M., Koerte, I., Otsuka, T., Rathi, Y., Pasternak, O., Bouix, S., Eckbo, R., Kikinis, Z., von Hohenberg, C. C., Roppongi, T., Del Re, E., Asami, T., Lee, S. H., Karmacharya, S., Mesholam-Gately, R. I., Seidman, L. J., Levitt, J., McCarley, R. W., Shenton, M. E. et Niznikiewicz, M. A..
2018.
« Impaired white matter connectivity between regions containing mirror neurons, and relationship to negative symptoms and social cognition, in patients with first-episode schizophrenia ».
Brain Imaging and Behavior, vol. 12, nº 1.
pp. 229-237.
Saleem, Essa Abrahim Abdulgader, Dao, Thien-My et Liu, Zhaoheng.
2018.
« Multiple objective optimization and design of series-parallele using novel hybrid genetic algorithm meta-heuristic approach ».
World Journal of Engineering and Technology, vol. 6, nº 3.
pp. 532-555.
Salehani, Yaser Esmaeili, Gazor, Saeed et Cheriet, Mohamed.
2018.
« Sparse hyperspectral unmixing via heuristic ℓp-norm approach ».
IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 11, nº 4.
pp. 1191-1202.
Salhab, Nazih, Falou, Salah El, Rahim, Rana, Ayoubi, Salah Eddine El et Langar, Rami.
2018.
« Optimization of the implementation of network slicing in 5G RAN ».
In IEEE Middle East and North Africa Communications Conference (MENACOMM) (Jounieh, Lebanon, Apr. 18-20, 2018)
IEEE.
Salhab, Nazih, Rahim, Rana et Langar, Rami.
2018.
« Throughput-Aware RRHs Clustering in Cloud Radio Access Networks ».
In Global Information Infrastructure and Networking Symposium (GIIS) (Thessaloniki, Greece, Oct. 23-25, 2018)
IEEE.
Samad, A., Morency, F. et Volat, C..
2018.
« Numerical model of the blade element momentum theory for rotating airfoils with heat transfer calculation ».
In 2018 Joint Thermophysics and Heat Transfer Conference (Atlanta, GA, USA, June 25-29, 2018)
Coll. « AIAA paper », vol. AIAA 2018-4077.
Reston, VA, USA : AIAA. Samson, C., Mallozzi, S., Brown, C., Hay, A., Léveillé, R., Neish, C. et Ernst, R.. 2018. « Geophysical characterization of lava tubes for planetary exploration ». Communication lors de la conférence : 18th Biennial Astronautics Conference of the Canadian Aeronautics and Space Institute (CASI) (Quebec City, QC, Canada, May 15-17, 2018).
Sanjosé, Marlène et Moreau, Stéphane.
2018.
« Fast and accurate analytical modeling of broadband noise for a low-speed fan ».
Journal of the Acoustical Society of America, vol. 143, nº 5.
pp. 3103-3113.
Sanjosé, Marlène, Pestana, Miguel, Moreau, Stéphane et Caule, Patrice.
2018.
« Evaluation of analytical aeroacoustic models for a low-speed axial ventilation system ».
In FAN 2018 - International Conference on Fan Noise, Aerodynamics, Applications and Systems (Darmstadt, Germany, Apr. 18-20, 2018)
Santos, Ivan Viveros, Bulle, Cécile, Levasseur, Annie et Deschênes, Louise.
2018.
« Regionalized terrestrial ecotoxicity assessment of copper-based fungicides applied in viticulture ».
Sustainability, vol. 10, nº 7.
Sari, Gholam-Reza, Akhrif, Ouassima et Saydy, Lahcen.
2018.
« Bifurcation analysis and active control of surge and rotating stall in axial flow compressors via passivity ».
In 13th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2016) (Lisbon, Portugal, July 29-31, 2016)
Coll. « Lecture Notes in Electrical Engineering », vol. 430.
pp. 91-116.
Springer Verlag.
Sarr, Ndéye Bineta, Agba, Basile L., Gagnon, François, Boeglen, Hervé et Vauzelle, Rodolphe.
2018.
« Analysis and experimental validation of efficient coded OFDM for an impulsive noise environment ».
Sensors, vol. 18, nº 11.
Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, François, Vincent et Tahan, Souheil-Antoine.
2018.
« “What-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads ».
International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4.
pp. 353-373.
Savaria, C., Phutthavong, P., Moustapha, H. et Garnier, F..
2018.
« Preliminary design for turbine housing and shroud segments ».
Aeronautical Journal, vol. 122, nº 1248.
pp. 260-282.
Sboui, Lokman, Ghazzai, Hakim, Rezki, Zouheir et Alouini, Mohamed-Slim.
2018.
« Dynamic spectrum management in green cognitive radio cellular networks ».
In IEEE 28th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC) (Montréal, QC, Canada, Oct. 08-13, 2017)
Institute of Electrical and Electronics Engineers Inc..
Schell, E. V., Shih, Andy et Akinwande, A. I..
2018.
« Characterization of room-temperature processed thin film capacitors under curvature ».
In
MTL Annual Research Report 2018 : Section : Electronic, Magnetic, Superconducting, and Neuromorphic Devices.
p. 122. Massachusetts Institute of Technology.
Schrama, F. N. H., Moosavi-Khoonsari, E., Beunder, E. M., Kooij, C., Boom, R., Sietsma, J. et Yang, Y..
2018.
« Slag optimisation considering iron loss and sulphide capacity in hot metal desulphurisation ».
In 7th International Congress on Science and Technology of Steelmaking : The Challenge of Industry 4.0 (Venice, Italy, June 13-15, 2018)
pp. 460-468.
Associazione Italiana di Metallurgia. Schrama, Frank N. H., Beunder, Elisabeth M., Moosavi-Khoonsari, Elmira, Boom, Rob, Sietsma, Jilt et Yang, Yongxiang. 2018. « Optimal slag in hot metal desulphurisation ». Affiche présentée lors de la conférence : MSE Technology poster presentation (Delft, Netherlands, June 07, 2018).
Sebaaly, F., Vahedi, H., Kanaan, H. Y. et Al-Haddad, K..
2018.
« Fixed switching frequency model predictive based controller for sensor-less five-level Packed U-cell (PUC5) single phase inverter ».
In 19th IEEE International Conference on Industrial Technology (ICIT 2018) (Lyon, France, Feb. 20-22, 2018)
pp. 1915-1919.
IEEE.
Sebaaly, Fadia, Vahedi, Hani, Kanaan, Hadi Youssef et Al-Haddad, Kamal.
2018.
« Novel current controller based on MPC with fixed switching frequency operation for a grid-tied inverter ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 8.
pp. 6193-6205.
Seede, Raiyan, Mostafa, Ahmad, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2018.
« Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Seghir, Benhalima, Chandra, Ambrish et Miloud, Rezkallah.
2018.
« A new control strategy for power quality improvement using MPPT from hybrid PV-wind connected to the grid ».
In 2018 IEEE 31st Canadian Conference on Electrical & Computer Engineering (CCECE) (Quebec City, QC, Canada, May 13-16, 2018)
Piscataway, NJ, USA : IEEE.
Segui, Marine M., Ghazi, Georges, Botez, Ruxandra Mihaela et Thompson, Emily.
2018.
« Design, development and validation of a cessna citation X aerodynamic model using openVSP software ».
In 2018 Modeling and Simulation Technologies Conference (Atlanta, GA, USA, June 25-19, 2018)
Coll. « AIAA Paper », vol. AIAA 2018-3256.
American Institute of Aeronautics and Astronautics Inc.
Segui, Marine, Bezin, Simon et Botez, Ruxanda Mihaela.
2018.
« Cessna Citation X performances improvement by an adaptive winglet during the cruise flight ».
International Journal of Mechanical, Industrial and Aerospace Sciences, vol. 12, nº 4.
pp. 423-430.
Segui, Marine et Botez, Ruxanda Mihaela.
2018.
« Aerodynamic coefficients prediction from minimum computation combinations using OpenVSP software ».
International Journal of Mechanical, Industrial and Aerospace Sciences, vol. 12, nº 1.
pp. 9-16.
Segui, Marine et Botez, Ruxandra Mihaela.
2018.
« Cessna citation X climb and cruise performance improvement using adaptive winglet ».
In Advanced Aircraft Efficiency in a Global Air Transport System (AEGATS) (Toulouse, France, Oct. 23-25, 2018)
Segui, Marine, Ghazi, Georges, Mantilla, Matthieu, Bezin, Simon et Botez, Ruxandra.
4 septembre 2018.
« L’aile déformable : une technologie d’avenir pour l’aviation ».
[Article de recherche]. Substance ÉTS.
Segui, Marine, Ghazi, Georges, Mantilla, Matthieu, Bezin, Simon et Botez, Ruxandra.
4 septembre 2018.
« Morphing Wing Technology—For the Future of Aviation ».
[Article de recherche]. Substance ÉTS.
Segui, Marine, Mantilla, Matthieu et Botez, Ruxanda Mihaela.
2018.
« Design and validation of an aerodynamic model of the Cessna Citation X horizontal stabilizer using both OpenVSP and digital datcom ».
International Journal of Mechanical, Industrial and Aerospace Sciences, vol. 12, nº 1.
pp. 45-53.
Segui, Marine, Mantilla, Matthieu et Botez, Ruxandra.
2 octobre 2018.
« Méthodes originales pour déterminer la forme d’un profil d’aile ».
[Article de recherche]. Substance ÉTS.
Segui, Marine, Mantilla, Matthieu et Botez, Ruxandra.
2 octobre 2018.
« Original Methods for Finding a Wing Shape Airfoil ».
[Article de recherche]. Substance ÉTS.
Segui, Marine, Mantilla, Matthieu, Ghazi, Georges et Botez, Ruxandra Mihaela.
2018.
« New economical cruise methodology for the cessna citation X business jet by an original morphing horizontal tail application ».
In 2018 Modeling and Simulation Technologies Conference (Atlanta, GA, USA, June 25-29, 2018)
Coll. « AIAA Paper », vol. AIAA 2018-3895.
American Institute of Aeronautics and Astronautics.
Segui, Marine, Thompson, Émily et Botez, Ruxandra.
9 octobre 2018.
« Aerodynamic Modeling of the World’s Fastest Business Jet ».
[Article de recherche]. Substance ÉTS.
Segui, Marine, Thompson, Émily et Botez, Ruxandra.
9 octobre 2018.
« Modélisation aérodynamique du jet d’affaire le plus rapide du monde ».
[Article de recherche]. Substance ÉTS.
Sel, Daniel, Zhang, Kaiwen et Jacobsen, Hans-Arno.
2018.
« Towards solving the data availability problem for sharded ethereum ».
In Proceedings of the 2nd Workshop on Scalable and Resilient Infrastructures for Distributed Ledgers (Rennes, France, Dec. 10-14, 2018)
pp. 25-30.
ACM.
Selim, Bassant, Muhaidat, Sami, Sofotasios, Paschalis C., Sharif, Bayan S., Stouraitis, Thanos, Karagiannidis, George K. et Al-Dhahir, Naofal.
2018.
« Outage probability of multi-carrier NOMA systems under joint I/Q imbalance ».
In International Conference on Advanced Communication Technologies and Networking (CommNet) (Marrakech, Morocco, Apr. 02-04, 2018)
Institute of Electrical and Electronics Engineers Inc..
Selim, Bassant, Muhaidat, Sami, Sofotasios, Paschalis C., Sharif, Bayan S., Stouraitis, Thanos, Karagiannidis, George K. et Al-Dhahir, Naofal.
2018.
« Outage probability of single carrier NOMA systems under I/Q imbalance ».
In IEEE Wireless Communications and Networking Conference (WCNC) (Barcelona, Spain, Apr. 15-18, 2018)
Institute of Electrical and Electronics Engineers Inc..
Selim, Bassant, Muhaidat, Sami, Sofotasios, Paschalis C., Sharif, Bayan S., Stouraitis, Thanos, Karagiannidis, George K. et Al-Dhahir, Naofal.
2018.
« Performance analysis of non-orthogonal multiple access under I/Q imbalance ».
IEEE Access, vol. 6.
pp. 18453-18468.
Selim, Bassant, Muhaidat, Sami, Sofotasios, Paschalis C., Sharif, Bayan S., Stouraitis, Thanos, Karagiannidis, George K. et Al-Dhahir, Naofal.
2018.
« Performance analysis of single carrier coherent and noncoherent modulation under I/Q imbalance ».
In IEEE Vehicular Technology Conference (Porto, Portugal, June 03-06, 2018)
Institute of Electrical and Electronics Engineers Inc..
Sgard, Franck, Benacchio, Simon, Luan, Yu, Xu, Huiyang, Carillo, Kevin, Doutres, Olivier, Nelisse, Hugues, Wagnac, Eric et De Guise, Jacques.
2018.
« Vibroacoustic modeling of an in vivo human head wearing a hearing protection device using the finite element method ».
In Euronoise 2018 : Conference Proceedings : the 11th European Congress and Exposition on Noise Control Engineering (Heraklion, Crete - Greece, May 27-31, 2018)
pp. 899-906.
EAA – HELINA.
Sghaier, Moslem Ouled, Foucher, Samuel, Lepage, Richard et Landry, Tom.
2018.
« A multiscale based approach for river extraction from SAR images using attribute filters ».
In IEEE International Geoscience and Remote Sensing Symposium (IGARSS) (Valencia, Spain, July 22-27, 2018)
pp. 9245-9248.
Piscataway, NJ, USA : IEEE.
Shaer, Bassel, Kenné, Jean-Pierre, Kaddissi, Claude et Fallaha, Charles.
2018.
« A chattering-free fuzzy hybrid sliding mode control of an electrohydraulic active suspension ».
Transactions of the Institute of Measurement and Control, vol. 40, nº 1.
pp. 222-238.
Shafaei, Amirhossein, Duhaime, François et Marefat, Vahid.
2018.
« Numerical simulation of pore pressure changes in Champlain clays - Sainte-Marthe study case ».
In GeoEdmonton 2018 – 71st Canadian Geotechnical Conference and the 13th Joint CGS/IAH-CNC Groundwater Conference (Edmonton, AB, Canada, Sept. 23-26, 2018)
Shah, Kaniyalal et Lévesque, Vincent (inventeurs) 29 mai 2018. « Systems and methods for monitoring insulation integrity for electrostatic friction ». Immersion Corporation (titulaire(s)). Brevet américain US 9,983,675.
Shahkolaei, Atena, Beghdadi, Azeddine, Al-maadeed, Somaya et Cheriet, Mohamed.
2018.
« MHDID: A multi-distortion historical document image database ».
In 2018 IEEE 2nd International Workshop on Arabic and Derived Script Analysis and Recognition (ASAR) (London, UK, Mar. 12-14, 2018)
pp. 156-160.
Piscataway, NJ, USA : IEEE.
Shahkolaei, Atena, Nafchi, Hossein Ziaei, Al-Maadeed, Somaya et Cheriet, Mohamed.
2018.
« Subjective and objective quality assessment of degraded document images ».
Journal of Cultural Heritage, vol. 30.
pp. 199-209.
Shahriari, Mohammadali, Svogor, Ivan, St-Onge, David et Beltrame, Givanni.
2018.
« Lightweight collision avoidance for resource-constrained robots ».
In 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Madrid, Spain, Oct. 1-5, 2018)
pp. 8513-8518.
Institute of Electrical and Electronics Engineers Inc..
Shameli Sendi, Alireza, Louafi, Habib, He, Wenbo et Cheriet, Mohamed.
2018.
« Dynamic optimal countermeasure selection for intrusion response system ».
IEEE Transactions on Dependable and Secure Computing, vol. 15, nº 5.
pp. 755-770.
Sharifzadeh, Mohammad, Vahedi, Hani et Al Haddad, Kamal.
2018.
« New constraint in SHE-PWM for single phase inverter applications ».
IEEE Transactions on Industry Applications, vol. 54, nº 5.
pp. 4554-4562.
Sharifzadeh, Mohammad, Vahedi, Hani et Al-Haddad, Kamal.
2018.
« SHM-PWM applied on single DC source CHB with self-regulation of capacitors voltages ».
In 19th IEEE International Conference on Industrial Technology (ICIT 2018) (Lyon, France, Feb. 20-22, 2018)
pp. 1893-1897.
IEEE.
Sharma, M. et Ung, B..
2018.
« Design and fabrication of novel photonic crystal fiber for supercontinuum generation of OAM beam ».
In 2018 Photonics North (PN) (Montreal, QC, Canada, June 05-07, 2018)
Sher, Hadeed Ahmed, Addoweesh, Khaled E. et Al Haddad, Kamal.
2018.
« An efficient and cost-effective hybrid MPPT method for a photovoltaic flyback micro-inverter ».
IEEE Transactions on Sustainable Energy, vol. 9, nº 3.
pp. 1137-1144.
Sheremetyev, V., Kudryashova, A., Dubinskiy, S., Galkin, S., Prokoshkin, S. et Brailovski, V..
2018.
« Structure and functional properties of metastable beta Ti-18Zr-14Nb (at.%) alloy for biomedical applications subjected to radial shear rolling and thermomechanical treatment ».
Journal of Alloys and Compounds, vol. 737.
pp. 678-683.
Sheremetyev, Vadim A., Bonartsev, Anton P., Dubinskiy, Sergey M., Zhukova, Yulia S., Bonartseva, Garina A., Makhina, Tatiana K., Akoulina, Elizaveta A., Ivanova, Elina V., Kotlyarova, Maria S., Prokoshkin, Sergey D., Brailovski, Vladimir et Shaitan, Konstantin V..
2018.
« Surface modification of Ti-Nb-Zr foams by Poly(3-Hydroxybutyrate) ».
In 3rd International Conference on Shape Memory Alloys (SMA) 2018 (Chelyabinsk, Russia, Aug. 16-20, 2018)
Coll. « Materials Research Proceedings », vol. 9.
pp. 74-79.
Millersville : Materials Research Forum Llc. Shih, A. et Akinwande, A. I.. 2018. « Field-plated high-voltage organic thin-film transistors & self-aligned solution-processing ». Affiche présentée lors de la conférence : MRS Materials Research Society Spring Meetinf & Exhibit (Phoenix, AZ, USA, Apr. 02-06, 2018). Shih, Andy. 2018. « Flexible and solution-processed organic thin film transistors for high voltage applications ». Thèse de doctorat. Massachusetts Institute of Technology, 300 p.
Shih, Andy et Akinwande, Akintunde Ibitayo.
2018.
« Solution-processed and self-assembled monolayer-treated high-voltage organic thin film transistors for flexible MEMS integration ».
MRS Advances, vol. 3, nº 33.
pp. 1877-1882.
Shih, Andy, Schell, E. et Akinwande, A. I..
2018.
« High breakdown voltage in solution-processed high-voltage organic thin film transistors ».
In
MTL Annual Research Report 2018 : Section : Electronic, Magnetic, Superconducting, and Neuromorphic Devices.
p. 121. Massachusetts Institute of Technology.
Shih, Andy, Schell, Elizabeth et Akinwande, Akintunde Ibitayo.
2018.
« Flexible solution-processed high-voltage organic thin film transistor ».
Journal of Materials Research, vol. 33, nº 2.
pp. 149-160.
Shoari, Niloofar et Dubé, Jean-Sébastien.
2018.
« Toward improved analysis of concentration data: Embracing nondetects ».
Environmental Toxicology and Chemistry, vol. 37, nº 3.
pp. 643-656.
Shu, Tingting, Gharaaty, Sepehr, Xie, WenFang, Joubair, Ahmed et Bonev, Ilian A..
2018.
« Dynamic path tracking of industrial robots with high accuracy using photogrammetry sensor ».
IEEE/ASME Transactions on Mechatronics, vol. 23, nº 3.
pp. 1159-1170.
Si Saber, Meriem Amina, Bayati, Abdolkhalegh, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« Featuring Real-Time imbalanced network traffic classification ».
In 2018 IEEE Confs on Internet of Things, Green Computing and Communications, Cyber, Physical and Social Computing, Smart Data, Blockchain, Computer and Information Technology, Congress on Cybermatics (Halifax, NS, Canada, July 30-Aug. 3, 2018)
pp. 840-846.
IEEE. Sicilia, Morgane et St-Jacques, Michèle. 2018. « Camionnage en milieu urbain : sécuriser les véhicules lourds et contribuer à la cohabitation entre tous les usagers de la route ». Communication lors de la conférence : 53e Congrès de l'AQTr : l'innovation, ça nous transporte! (Québec, QC, Canada, 9-11 avril 2018).
Silicia, Morgane et St-Jacques, Michèle.
2018.
« Innovation et sécurité des véhicules lourds circulant en milieu urbain au Québec ».
Routes et Transports, vol. 47, nº 1.
pp. 54-57.
Silva, Hudson Pacifico, Lehoux, Pascale et Hagemeister, Nicola.
2018.
« Developing a tool to assess responsibility in health innovation: Results from an international delphi study ».
Health Policy and Technology, vol. 7, nº 4.
pp. 388-396.
Silva, Ronan A., Britto Jr., Alceu S., Enembreck, Fabricio, Sabourin, Robert et Oliveira, Luis S..
2018.
« Fusion of classifiers based on centrality measures ».
In 2018 IEEE 30th International Conference on Tools with Artificial Intelligence (ICTAI) (Volos, Greece, Nov. 5-7, 2018)
pp. 363-370.
Los Alamitos, CA, USA : IEEE Computer Society.
Silva, Tassia, Kikuti, S. Z. et Melhado, S. B..
2018.
« Gestão de riscos em projetos de engenharia ».
In XVII Encontro Nacional de Tecnologia do Ambiente Construído (ENTAC) (Foz do Iguaçu, Brésil, Nov. 12-14, 2018)
pp. 2427-2433.
Porte Alegre : ANTAC.
Singh, Bhim, Verma, Anjeet, Chandra, A. et Al-Haddad, Kamal.
2018.
« Implementation of solar PV-battery and diesel generator based electric vehicle charging station ».
In 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (Chennai, India, Dec. 18-21, 2018)
New York : IEEE.
Singh, Praveen Kumar, Singh, Bhim, Bist, Vashist, Al-Haddad, Kamal et Chandra, Ambrish.
2018.
« BLDC motor drive based on bridgeless landsman PFC converter with single sensor and reduced stress on power devices ».
IEEE Transactions on Industry Applications, vol. 54, nº 1.
pp. 625-635.
Sleiman, Mohammad, Al-Haddad, Kamal, Blanchette, Handy Fortin et Kanaan, Hadi Youssef.
2018.
« Insertion index generation method using available leg-average voltage to control modular multilevel converters ».
IEEE Transactions on Industrial Electronics, vol. 65, nº 8.
pp. 6206-6216.
Slim, Hussein, Nadeau, Sylvie et Morency, François.
2018.
« FRAM: A complex system’s approach for the evaluation of aircraft on-ground deicing operations ».
In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64.
GFA Press.
Slim, Hussein, Nadeau, Sylvie et Morency, François.
2018.
« The application of the Functional Resonance Analysis Method (FRAM) to evaluate factors affecting times-to-completion and graduation in graduate studies ».
In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64.
GFA Press. Snaiki, Reda et Wu, Teng. 2018. « A new boundary layer wind field model for landfalling hurricanes ». Affiche présentée lors de la conférence : 10th International Conference on Urban Climate / 14th Symposium on the Urban Environment (New York City, NY, USA, Aug. 06-10, 2018).
Snaiki, Reda et Wu, Teng.
2018.
« A semi-empirical model for mean wind velocity profile of landfalling hurricane boundary layers ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 180.
pp. 249-261.
Snaiki, Reda et Wu, Teng.
2018.
« An analytical framework for rapid estimate of rain rate during tropical cyclones ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 174.
pp. 50-60.
Snaiki, Reda et Wu, Teng.
2018.
« An improved methodology for risk assessment of tropical cyclones under changing climate ».
In 33rd Conference on Hurricanes and Tropical Meteorology (Ponte Vedra, FL, USA, Apr. 16-20, 2018)
American Meteorological Society.
Soleymani, Roghayeh, Granger, Eric et Fumera, Giorgio.
2018.
« F-Measure curves for visualizing classifier performance with imbalanced data ».
In Artificial Neural Networks in Pattern Recognition : 8th IAPR TC3 Workshop, ANNPR 2018, Siena, Italy, September 19–21, 2018, Proceedings (Siena, Italy, Sept. 19-21, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11081.
pp. 165-177.
Springer.
Soleymani, Roghayeh, Granger, Eric et Fumera, Giorgio.
2018.
« Progressive boosting for class imbalance and its application to face re-identification ».
Expert Systems with Applications, vol. 101.
pp. 271-291.
Sollmann, N., Echlin, P. S., Schultz, V., Viher, P. V., Lyall, A. E., Tripodis, Y., Kaufmann, D., Hartl, E., Kinzel, P., Forwell, L. A., Johnson, A. M., Skopelja, E. N., Lepage, C., Bouix, S., Pasternak, O., Lin, A. P., Shenton, M. E. et Koerte, I. K..
2018.
« Sex differences in white matter alterations following repetitive subconcussive head impacts in collegiate ice hockey players ».
NeuroImage: Clinical, vol. 17.
pp. 642-649.
Soltanian, Abbas, Naboulsi, Diala, Salahuddin, Mohammad A., Glitho, Roch, Elbiaze, Halima et Wette, Constant.
2018.
« ADS: adaptive and dynamic scaling mechanism for multimedia conferencing services in the cloud ».
In 15th IEEE Annual Consumer Communications & Networking Conference (CCNC) (Las Vegas, NV, USA, Jan. 12-15, 2018)
Piscataway, NJ, USA : IEEE. Somers, Lauren D., McKenzie, Jeffrey M., Mark, Bryan, Lagos, Pablo, Crystal Ng, Gene-Hua, Wickert, Andrew, Baraer, Michel et Sadler, Morgan. 2018. « How climate change and glacier recession impact a tropical proglacial watershed: towards a holistic modelling approach ». Communication lors de la conférence : 2018 Joint Meeting of the CGU-CSSS-CIG-ES-SSA-CSAFM (Niagara Falls, ON, Canada, June 10-14, 2018).
Somers, Lauren D., McKenzie, Jeffrey M., Zipper, Samuel C., Mark, Bryan G., Lagos, Pablo et Baraer, Michel.
2018.
« Does hillslope trenching enhance groundwater recharge and baseflow in the Peruvian Andes? ».
Hydrological Processes, vol. 32, nº 3.
pp. 318-331. Somers, Lauren Dorothy, Mckenzie, Jeffrey M., Mark, Bryan G., Lagos, Pablo, Ng, G.-H. Crystal, Wickert, Andrew D., Baraer, Michel et Sadler, Morgan. 2018. « Evaluation of climate impacts on andean hydrology using an integrated groundwater, surface water and glacier model ». Communication lors de la conférence : 2018 AGU Fall Meeting (Washington, DC, USA, Dec. 10-14, 2018).
Songmene, V., Kouam, J. et Balhoul, A..
2018.
« Effect of minimum quantity lubrication (MQL) on fine and ultrafine particle emission and distribution during polishing of granite ».
Measurement: Journal of the International Measurement Confederation, vol. 114.
pp. 398-408.
Songmene, V., Miazza, A., Kouam, J. et Olufayo, O.A..
2018.
« Machining granite materials: effects of polishing conditions on part quality, fine and ultrafine particles emission ».
In 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018)
pp. 37-46.
Comite Africain de Metrologie. Songmene, Victor. 2018. « Effect of machining & lubricating conditions on dust emission during granite polishing ». Communication lors de la conférence : 4th International Conference on Occupational Health and Safety, EuroSciCon (London, UK, May 28-29, 2018).
Songmene, Victor, Miazza, Alban, Hechmi, Mohamed Amine, Olufayo, Oluwole Ayodeji et Kouam, Jules.
2018.
« Granite polishing: Effects of polishing parameters and tool paths on part quality and dust emission ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 139-142.
Elsevier.
Songmene, Victor, Zaghbani, Imed et Kientzy, Guillaume.
2018.
« Machining and machinability of tool steels: Effects of lubrication and machining conditions on tool wear and tool life data ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 505-508.
Elsevier.
Soujeri, E., Kaddoum, G. et Herceg, M..
2018.
« Design of an initial condition-index chaos shift keying modulation ».
Electronics Letters, vol. 54, nº 7.
pp. 447-449.
Soul, Hugo, Terriault, Patrick et Brailovski, Vladimir.
2018.
« The static and fatigue behavior of AlSiMg alloy plain, notched, and diamond lattice specimens fabricated by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Soulez, Gilles, Fatimi, Ahmed, Coutu, Jean-Michel, Raymond, Jean et Lerouge, Sophie (inventeurs) 17 juillet 2018. « Embolizing sclerosing hydrogel ». Socovar, Val-Chum Limted Partnership (titulaire(s)). Brevet canadien CA 2704971. [Titre traduit: Hydrogel d'embolisation sclerosante].
Souza, Victor L. F., Oliveira, Adriano L. I. et Sabourin, Robert.
2018.
« A writer-independent approach for offline signature verification using deep convolutional neural networks features ».
In 2018 7th Brazilian Conference on Intelligent Systems (BRACIS) (Sao Paulo, Brazil, Oct. 22-25, 2018)
pp. 212-217.
Los Alamitos, CA, USA : IEEE Computer Society.
Sriwasansak, Jamorn, Gruson, Adrien et Hachisuka, Toshiya.
2018.
« Efficient energy-compensated VPLs using photon splatting ».
Proceedings of the ACM on Computer Graphics and Interactive Techniques, vol. 1, nº 1.
pp. 1-13.
Staub-French, Sheryl, Poirier, Erik A., Calderon, Francisco, Chikhi, Imen, Zadeh, Puyan, Chudasma, Divyarajsinh et Huang, Shitian.
2018.
« Building Information Modeling (BIM) and Design for Manufacturing and Assembly (DfMA) for Mass Timber Construction ».
BIM TOPiCS Research Lab. 101 p.
Stepanenko, Oleksandr et Bonev, Ilian A..
2018.
« Novel 4-DOF SCARA parallel robot with cylindrical workspace ».
In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Quebec, QC, Canada, Aug. 26-29, 2018)
ASME. St-Jacques, M. et Sicilia, M.. 2018. « Les mesures pour gérer les enjeux liés à la présence des véhicules lourds en milieu urbain ». Communication lors de la conférence : Colloque Partage de la rue : la sécurité avant tout ! Association québécoise des transports (AQTr) (Laval, QC, Canada, 15 nov. 2018).
St-Jacques, Michèle.
2018.
« Quels impacts les transformations sociales du milieu de la recherche et de l’enseignement supérieur ont-elles sur les hommes en sciences ? Évolution de l’équité du genre par rapport à la loi paritaire. Perception des rapports hommes-femmes ».
In
Regards croisés sur les interactions et l’égalité femme-homme en milieu universitaire.
pp. 179-189. Editions Universitaires Européennes.
St-Jacques, Michèle et St-Pierre, Francis.
2018.
« Doit-on implanter des photos radars au Québec? ».
In 24e édition INFRA (Québec, QC, Canada, 19-21 nov. 2018)
St-Onge, David, Kwek, Jing Yang et Beltrame, Giovanni.
2018.
« Behaviours and states for human-swarm interaction studies ».
In 13th Annual ACM/IEEE International Conference on Human Robot Interaction (HRI) (Chicago, IL, USA, Mar. 5-8, 2018)
p. 42.
IEEE Computer Society.
St-Onge, David, Pinciroli, Carlo et Beltrame, Giovanni.
2018.
« Circle formation with computation-free robots shows emergent behavioural structure ».
In 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Madrid, Spain, Oct. 1-5, 2018)
pp. 5344-5349.
Institute of Electrical and Electronics Engineers Inc..
St-Onge, David, Sharf, Inna, Sagnières, Luc et Gosselin, Clément.
2018.
« A deployable mechanism concept for the collection of small-to-medium-size space debris ».
Advances in Space Research, vol. 61, nº 5.
pp. 1286-1297. Strzelczak, M., Sins, L., Begon, M. et Hagemeister, N.. 2018. « New more physiologically faithful deltoid model integrated in the musculoskeletal model of non-conforming total shoulder arthroplasty ». Communication lors de la conférence : Orthopaedic Research Society (ORS) 2018 Annual Meeting (New Orleans, LA, USA, Mar. 09-13, 2018). Strzelczak, Marta, Lund, Morten, Sins, Lauranne, Begon, Mickael et Hagemeister, Nicola. 2018. « A new wrapping approach for the deltoid muscle modelling ». Communication lors de la conférence : The 20th Biennial Meeting of the Canadian Society for Biomechanics (Halifax, NS, Canada, Aug. 14-17, 2018).
Subedi, Tara Nath, Nguyen, Kim Khoa et Cheriet, Mohamed.
2018.
« SDN-based fault-tolerant on-demand and in-advance bandwidth reservation in data center interconnects ».
International Journal of Communication Systems, vol. 31, nº 4.
Sun, Binhan, Fazeli, Fateh, Scott, Colin, Guo, Baoqi, Aranas, Clodualdo, Chu, Xin, Jahazi, Mohammad et Yue, Stephen.
2018.
« Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ».
Materials Science and Engineering: A, vol. 729.
pp. 496-507.
Sun, David Yuan-Jae, Athienitis, Andreas K. et D’Avignon, Katherine.
2018.
« Application of semi-transparent photovoltaics in transportation infrastructure for energy savings and solar electricity production: towards novel net-zero energy tunnel design ».
In Proceedings of the 35th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC 2018) (Brussels, Belgium, Sept. 24-27, 2018)
pp. 1496-1503.
WIP GmbH & Co Planungs-KG.
Sun, Xiaoguang, Houssin, Rémy, Renaud, Jean et Gardoni, Mickaël.
2018.
« Towards a human factors and ergonomics integration framework in the early product design phase: Function-Task-Behaviour ».
International Journal of Production Research, vol. 56, nº 14.
pp. 4941-4953.
Suprême, Hussein, Dessaint, Louis-A., Kamwa, Innocent et Heniche-Oussédik, Annissa.
2018.
« Development of new predictors based on the concept of center of power for transient and dynamic instability detection ».
IEEE Transactions on Smart Grid, vol. 9, nº 4.
pp. 3605-3615. Suryn, Witold. 2018. « Cloud computing, a 21st century technological panaceum ». Communication lors de la conférence : 26th International Software Quality Management (SQM) Conference (London, England, Mar. 25, 2018).
Sydnor, V. J., Rivas-Grajales, A. M., Lyall, A. E., Zhang, F., Bouix, S., Karmacharya, S., Shenton, M. E., Westin, C. F., Makris, N., Wassermann, D., O'Donnell, L. J. et Kubicki, M..
2018.
« A comparison of three fiber tract delineation methods and their impact on white matter analysis ».
NeuroImage, vol. 178.
pp. 318-331.
Tadayon, Navid et Kaddoum, Georges.
2018.
« Packet-level modeling of cooperative diversity: A queueing network approach ».
IEEE Access, vol. 6.
pp. 35223-35242.
Tagawa, Gitsuzo B. S., Morency, François et Beaugendre, Héloïse.
2018.
« CFD study of airfoil lift reduction caused by ice roughness ».
In 2018 Applied Aerodynamics Conference (Reston, VA, USA, June 25-29, 2018)
Coll. « AIAA Paper », vol. AIAA 2018-3010.
American Institute of Aeronautics and Astronautics.
Tahat, Ashraf, Aburub, Ruba, Al-Zyoude, Aseel et Talhi, Chamseddine.
2018.
« A smart city environmental monitoring network and analysis relying on big data techniques ».
In International Conference on Software Engineering and Information Management (ICSIM) and its Workshop International Conference on Big Data and Smart Computing (ICBDSC) (Casablanca, Morocco, Jan. 04-06, 2018)
Coll. « ACM International Conference Proceeding Series »
pp. 82-86.
Association for Computing Machinery.
Talbot, Marie-Hélène et Monfet, Danielle.
2018.
« Impact des plantes sur les charges d’un espace d’agriculture intégré au bâtiment : Implantation d’un modèle de plantes ».
In eSim 2018 (Montréal, QC, Canada, May 09-10, 2018)
Talebi, Seyyed Hesamodin, Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Melkonyan, Haikouhi.
2018.
« Influence of starting microstructure on dilatation behavior during tempering of a high strength steel ».
In THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018)
Coll. « Materials Science Forum », vol. 941.
pp. 305-310.
Trans Tech Publications.
Talebi, Seyyed Hesamondin, Jahazi, Mohammad et Melkonyan, Haikouhi.
2018.
« Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ».
Materials, vol. 11, nº 8.
Tan, Long, Li, Pandeng, Zhang, Qingzhe, Izquierdo, Ricardo, Chaker, Mohamed et Ma, Dongling.
2018.
« Toward enhancing solar cell performance: An effective and "green" additive ».
ACS Applied Materials and Interfaces, vol. 10, nº 7.
pp. 6498-6504.
Tang, Meng, Perazzi, Federico, Djelouah, Abdelaziz, Ben Ayed, Ismail, Schroers, Christopher et Boykov, Yuri.
2018.
« On regularized losses for weakly-supervised CNN segmentation ».
In Computer Vision – ECCV 2018 : 15th European Conference : Proceedings (Munich, Germany, Sept. 08-14, 2018)
Coll. « Lecture Notes in Computer Science », vol. 11220.
pp. 524-540.
Springer.
Tapsoba, Gildas, Hamadi, Abdelhamid, Ndtoungou, Auguste, Rahmani, Salem et Al-Haddad, Kamal.
2018.
« PV configuration and maximization applied to parallel inverters using updated droop control ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 1430-1435.
Piscataway, NJ, USA : IEEE.
Tata, M., Smaili, A. et Masson, C..
2018.
« Effect of grid topology on numerical simulations of flow fields around wind turbine nacelle anemometer ».
Journal of Applied Fluid Mechanics, vol. 11, nº 6.
pp. 1569-1578.
Tato, Ange, Dufresne, Aude, Nkambou, Roger, Morasse, Frédérick et Beauchamp, Miriam H..
2018.
« Preliminary evaluation of a serious game for socio-moral reasoning ».
In 14th International Conference on Intelligent Tutoring Systems, ITS Proceedings (Montreal, QC, Canada, June 11-15, 2018)
Coll. « Lecture Notes in Computer Science », vol. 10858.
pp. 473-475.
Springer.
Tato, Ange, Nkambou, Roger, Dufresne, Aude et Frasson, Claude.
2018.
« Semi-supervised multimodal deep learning model for polarity detection in arguments ».
In International Joint Conference on Neural Networks (IJCNN) (Rio de Janeiro, Brazil, July 08-13, 2018)
Institute of Electrical and Electronics Engineers Inc..
Tato, Ange, Nkambou, Roger et Frasson, Claude.
2018.
« Predicting emotions from multimodal users' data ».
In Proceedings of the 26th Conference on User Modeling, Adaptation and Personalization (UMAP) (Singapore, Singapore, July 08-11, 2018)
pp. 369-370.
Association for Computing Machinery, Inc.
Tawfik, Hani H., Elsayed, Mohannad Y., Nabki, Frederic et El-Gamal, Mourad N..
2018.
« Hard-baked photoresist as a sacrificial layer for sub-180 °C surface micromachining processes ».
Micromachines, vol. 9, nº 5.
Tebaldi, Gabriele, Dave, Eshan V., Cannone Falchetto, Augusto, Hugener, Martin, Perraton, Daniel, Grilli, Andrea, Lo Presti, Davide, Pasetto, Marco, Loizos, Andreas, Jenkins, Kim, Apeagyei, Alex, Grenfell, James et Bocci, Maurizio.
2018.
« Recommendation of RILEM TC237-SIB: protocol for characterization of recycled asphalt (RA) materials for pavement applications ».
Materials and Structures = Matériaux et Constructions, vol. 51, nº 6.
Tebaldi, Gabriele, Dave, Eshan, Cannone Falchetto, Augusto, Hugener, Martin, Perraton, Daniel, Grilli, Andrea, Lo Presti, Davide, Pasetto, Marco, Loizos, Andreas, Jenkins, Kim, Apeagyei, Alex, Grenfell, James et Bocci, Maurizio.
2018.
« Recommendation of RILEM TC237-SIB on cohesion test of recycled asphalt ».
Materials and Structures = Matériaux et Constructions, vol. 51, nº 5.
Tebaldi, Gabriele, Dave, Eshan, Hugener, Martin, Falchetto, Augusto C., Perraton, Daniel, Grilli, Andrea, Presti, Davide Lo, Pasetto, Marco, Loizos, Andreas, Jenkins, Kim, Apeagyei, Alex, Grenfell, James et Bocci, Maurizio.
2018.
« Cold recycling of reclaimed asphalt pavements ».
In
Testing and characterization of sustainable innovative bituminous materials and systems.
Coll. « RILEM State-of-the-Art Reports », vol. 24.
pp. 239-296. Springer.
Tebib, Safouane, Sanjosé, Marlène, Arroyo, Carlos Pérez, Moreau, Stéphane et Ingenito, Johanna.
2018.
« CFD analysis of an outflow butterfly valve ».
In 26th Annual Conference of the Computational Fluid Dynamics Society of Canada (Winnipeg, MB, Canada, June 10-12, 2018)
Tenório, Leandro, de Assis, Cleverson Faber, da Silva, Adriano Maniçoba, de Paula Ferreira, William et Tanaka, Wilson Yoshio.
2018.
« Lean IT application in service desk in a wires and cable company ».
Journal of Lean Systems, vol. 3, nº 4.
Terfas, Hebatalla, Suryn, Witold, Roy, Jonathan et Moazzezi Eftekhar, Sara.
2018.
« Extending ISO/IEC 19086 cloud computing SLA standards to support cloud service users with the SLA negotiation process ».
In 26th International Software Quality Management (SQM) Conference (London, England, Mar. 25, 2018)
pp. 127-143.
Southampton Solent University.
Terriault, Patrick et Brailovski, Vladimir.
2018.
« Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing ».
Finite Elements in Analysis and Design, vol. 138.
pp. 1-11.
Tétrault, P. et Seers, P..
2018.
« Potential of a jet-induced shock wave to influence an upstream droplet cloud in compression-ignition engines using multiple injection strategies ».
International Journal of Multiphase Flow, vol. 101.
pp. 64-73.
Texier, D., Atmani, F., Bocher, P., Nadeau, F., Chen, J., Zedan, Y., Vanderesse, N. et Demers, V..
2018.
« Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation ».
International Journal of Fatigue, vol. 116.
pp. 220-233.
Thamsuwan, Ornwipa, Galvin, Kit, Tchong-French, Maria, Hughes, Margaret, Gregersen, Katherine, Palmandez, Pablo, Negrete, Maria et Johnson, Peter W..
2018.
« Field-based electromyography to assess shoulder muscle activity during repetitive tasks: An application in apple orchards ».
In 49th Annual Conference of the Association of Canadian Ergonomists (ACE) ; 6th Conference of the Centre for Research in Occupational Safety and Health (CROSH) : From research to practice to prevention (Sudbury, ON, Canada, Oct. 15-18, 2018)
pp. 108-109.
Association of Canadian Ergonomists.
Thibeault, Claude et Gagnon, Ghyslain.
2018.
« On the analysis and the mitigation of power supply noise and power distribution network impedance variation for scan-based delay testing techniques ».
IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 26, nº 7.
pp. 1377-1390.
Thrithamarassery Gangadharan, Deepak, Han, Yujie, Dubey, Ashish, Gao, Xinyu, Sun, Baoquan, Qiao, Qiquan, Izquierdo, Ricardo et Ma, Dongling.
2018.
« Aromatic alkylammonium spacer cations for efficient two-dimensional perovskite solar cells with enhanced moisture and thermal stability ».
Solar RRL, vol. 2, nº 4.
Timercan, Anatolie, Brailovski, Vladimir, Lussier, Bertrand, Petit, Yvan et Seguin, Bernard.
8 mai 2018.
« 3D Printed Personalized Canine Prostheses ».
[Article de recherche]. Substance ÉTS.
Timercan, Anatolie, Brailovski, Vladimir, Lussier, Bertrand, Petit, Yvan et Seguin, Bernard.
8 mai 2018.
« Prothèses canines personnalisées imprimées en 3D ».
[Article de recherche]. Substance ÉTS.
Tlili, Ghada, Zhani, Mohamed Faten et Elbiaze, Halima.
2018.
« On providing deadline-aware cloud storage services ».
In 21st Conference on Innovation in Clouds, Internet and Networks and Workshops (ICIN) (Paris, France, 19-22, 2018)
IEEE.
Toews, Matthew et Wells, M. William.
2018.
« Phantomless auto-calibration and online calibration assessment for a tracked freehand 2-D ultrasound probe ».
IEEE Transactions on Medical Imaging, vol. 37, nº 1.
pp. 262-272.
Tolossa, Yohannes Jote, Vuppala, Satyanarayana, Kaddoum, Georges et Abreu, Giuseppe.
2018.
« On the uplink secrecy capacity analysis in D2D-enabled cellular network ».
IEEE Systems Journal, vol. 12, nº 3.
pp. 2297-2307.
Tolouei, Ehsan, Toroghinejad, Mohammad Reza, Asgari, Hamed, Monajati Zadeh, Hossein, Ashrafizadeh, Fakhreddin, Szpunar, Jerzy A. et Bocher, Philippe.
2018.
« Microstructure and texture development in Al-3%Brass composite produced through ARB ».
Advanced Engineering Materials, vol. 20, nº 4.
Touahir, Kamel, Bilek, Ali, Larbi, Said, Djebali, Said et Bocher, Philippe.
2018.
« 3D stress analysis of a loaded birefringent sphere by photoelastic experiment and finite elements method ».
In 24th Conference on Applications of Computer Algebra (Santiago de Compostela, Spain, June 18-22, 2018)
Touani, K. F., Der Sarkissian, S., Borie, M., Noiseux, N. et Lerouge, S.. 2018. « Pharmacological preconditioning improves viability, paracrine activities and neoangiogenesis of hydrogel encapsulated mesenchymal stem cells ». Affiche présentée lors de la conférence : 34th Annual Meeting of the Canadian Biomaterials Society (Victoria, BC, Canada, May 16-19, 2018).
Trabelsi, Mohamed, Vahedi, Hani, Komurcugil, Hasan, Abu-Rub, Haitham et Al-Haddad, Kamal.
2018.
« Low complexity model predictive control of PUC5 based dynamic voltage restorer ».
In 27th IEEE International Symposium on Industrial Electronics (ISIE 2018) (Cairns, QLD, Australia, June 13-15, 2018)
pp. 240-245.
IEEE.
Tran, Duc-Dung, Tran, Ha-Vu, Ha, Dac Binh et Kaddoum, Georges.
2018.
« Cooperation in NOMA networks under limited user-to-user communications: Solution and analysis ».
In IEEE Wireless Communications and Networking Conference (WCNC) (Barcelona, Spain, Apr. 15-18, 2018)
IEEE.
Tran, Ha Vu, Kaddoum, Georges et Truong, Kien Trung.
2018.
« Resource allocation in SWIPT networks under a nonlinear energy harvesting model: Power efficiency, user fairness, and channel nonreciprocity ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 9.
pp. 8466-8480.
Tran, Ha-Vu et Kaddoum, Georges.
2018.
« Green cell-less design for RF-wireless power transfer networks ».
In IEEE Wireless Communications and Networking Conference (WCNC) (Barcelona, Spain, Apr. 15-18, 2018)
IEEE.
Tran, Ha-Vu et Kaddoum, Georges.
2018.
« RF wireless power transfer: Regreening future networks ».
IEEE Potentials, vol. 37, nº 2.
pp. 35-41. Tran, T.-N., Nguyen, C.-C. et Pham, X.-T.. 2018. « Multi-physics modeling of aluminium laser welding process ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).
Tremblay, Christine et Aladin, Sandra.
2018.
« Machine learning techniques for estimating the quality of transmission of lightpaths ».
In IEEE Photonics Society Summer Topicals Meeting Series (SUM 2018) (Waikoloa, HI, USA, July 09-11, 2018)
pp. 237-238.
IEEE.
Tremblay, Christine, Archambault, Émile, Bélanger, Michel P., Littlewood, Paul, Clelland, William, Furdek, Marija et Wosinska, Lena.
2018.
« Agile optical networking: Beyond filtered solutions ».
In Optical Fiber Communication Conference (OFC 2018) (San Diego, CA, USA, Mar. 11-15, 2018)
OSA publishing.
Trochu, F., Hilal, S., Huang, W., Sun, Y., Causse, P. et Brailovski, V..
2018.
« Reconstruction and data compression of three-dimensional composite fiber architecture from microtomographic images ».
In 7th International Symposium on Air/Craft Materials (ACMA) (Compiègne, France, Apr. 24-26, 2018)
Trochu, Julien, Chaabane, Amin et Ouhimmou, Mustapha.
30 octobre 2018.
« Optimiser le recyclage du bois de construction au Québec ».
[Article de recherche]. Substance ÉTS.
Trochu, Julien, Chaabane, Amin et Ouhimmou, Mustapha.
30 octobre 2018.
« Optimizing Quebec’s Lumber Recycling ».
[Article de recherche]. Substance ÉTS.
Trochu, Julien, Chaabane, Amin et Ouhimmou, Mustapha.
2018.
« Reverse logistics network design under uncertainties a two-stage stochastic approach to address the dynamic location of the supply sources ».
In 7th International Conference on Information Systems, Logistics and Supply Chain (ILS 2018) (Lyon, France, July 08-11, 2018)
pp. 125-136.
INSA Lyon.
Trochu, Julien, Chaabane, Amin et Ouhimmou, Mustapha.
2018.
« Reverse logistics network redesign under uncertainty for wood waste in the CRD industry ».
Resources, Conservation and Recycling, vol. 128.
pp. 32-47.
Troin, Magali, Arsenault, Richard, Martel, Jean-Luc et Brissette, François.
2018.
« Uncertainty of hydrological model components in climate change studies over two Nordic Quebec catchments ».
Journal of Hydrometeorology, vol. 19, nº 1.
pp. 27-46.
Troudi, S., Ktata, S., Ben Fathel, Y., Rahmani, S. et Al-Haddad, K..
2018.
« ECG signal parameters extraction using intelligent adaptive algorithm ».
In 18th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA 2017) (Monastir, Tunisia, Dec. 21-23, 2017)
pp. 617-622.
Trudeau, Charles, Bolduc, Martin, Beaupre, Patrick, Benavides-Guerrero, Jaime, Tremblay, Bruno et Cloutier, Sylvain G..
2018.
« Inkjet-printing of methylammonium lead trihalide perovskite as active layers for optoelectronic devices ».
MRS Advances, vol. 3, nº 32.
pp. 1837-1842.
Trudeau, Charles, Bolduc, Martin, Beaupré, Patrick, Ka, Ibrahima, Asuo, Ivy M. et Cloutier, Sylvain G..
2018.
« Inkjet-printing of methylammonium lead trihalide perovskite-based flexible optoelectronic devices ».
In 2018 International Flexible Electronics Technology Conference (IFETC) (Ottawa, ON, Canada, Aug. 7-9, 2018)
Piscataway, NJ, USA : IEEE.
Trudeau, Charles, Dion-Bertrand, Laura-Isabelle, Mukherjee, Sankha, Martel, Richard et Cloutier, Sylvain.
2018.
« Electrostatic deposition of large-surface graphene ».
Materials, vol. 11, nº 1.
p. 116. Trudeau, Luc Normand, Coulombe, Stephane et Desrosiers, Christian (inventeurs) 26 juin 2018. « Method and system for rate-constrained search ordering ». Ecole de technologie supérieure (titulaire(s)). Brevet américain US 10,009,626.
Trudeau, Luc, Coulombe, Stéphane et Desrosiers, Christian.
2018.
« Cost-based search ordering for rate-constrained motion estimation applied to HEVC ».
IEEE Transactions on Broadcasting, vol. 64, nº 4.
pp. 922-932.
Tu, Fubin, Delbergue, Dorian, Klotz, Thierry, Bag, Amrita, Miao, Hongyan, Bianchetti, Charles, Brochu, Myriam, Bocher, Philippe et Levesque, Martin.
2018.
« Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials ».
International Journal of Mechanical Sciences, vol. 145.
pp. 353-366.
Tubaldi, Eleonora, Ferrari, Giovanni, Balasubramanian, Prabakaran, Breslavskyi, Ivan et Amabili, Marco.
2018.
« Viscoelastic characterization of woven Dacron for aortic grafts by using direction-dependent quasi-linear viscoelasticity ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Pittsburgh, PA, USA, Nov. 09-15, 2018)
American Society of Mechanical Engineers (ASME).
Tuck, L., Samson, C., Laliberté, J., Wells, M. et Bélanger, F..
2018.
« Magnetic interference testing method for an electric fixed-wing unmanned aircraft system (UAS) ».
Journal of Unmanned Vehicle Systems, vol. 6, nº 3.
pp. 177-194. Tuduri, L., Cloutier, Y., Bahloul, A., Hallé, S., Tessier, D., Dolez, P., Giraudel, J.-L. et Yip, P.. 2018. « Penetration of solid aerosols through nonwoven materials from type-5 chemical protective clothing ». Communication lors de la conférence : The 11th International Occupational Hygiene Association international Scientific Conference (Washington, DC, USA, Sept. 24-26, 2018). Tuduri, Ludovic, Gauvin, Chantal, Nguyen-Tri, Phuong, Triki, Ennouri et Vu-Khanh, Toan. 2018. « Effet des fluides de coupe sur la résistance à la coupure et à la perforation des gants de protection ». Communication lors de la conférence : 40e Congrès annuel AQHSST (Saguenay, QC, Canada, 16-18 mai 2018). Uh Zapata, M., Nguyen, K. D. et Pham Van Bang, D.. 2018. « A new hydrodynamic model for three-dimensional flows in estuaries based on an unstructured finite volume technique ». Communication lors de la conférence : 6th International Conference on Estuaries and Coasts (Caen, France, Aug. 20-23, 2018). Uh Zapata, M., Pham Van Bang, D. et Nguyen, K. D.. 2018. « A parallel multi-color unstructured finite volume method for 3D free-surface flows ». Communication lors de la conférence : International Conference on Parallel Computational Fluid Dynamics (Indianapolis, IN, USA, May 14-17, 2018).
Uh Zapata, M., Pham Van Bang, D. et Nguyen, K. D..
2018.
« Parallel simulations for a 2D x/z two-phase flow fluid-solid particle model ».
Computers and Fluids, vol. 173.
pp. 103-110.
Ulloa-Cazarez, Rosa Leonor, López-Martín, Cuauhtémoc, Abran, Alain et Yáñez-Márquez, Cornelio.
2018.
« Prediction of online students performance by means of genetic programming ».
Applied Artificial Intelligence, vol. 32, nº 9-10.
pp. 858-881. Ung, Bora. 2018. « Annular beams: their generation and transmission in optical fibers ». Communication lors de la conférence : Pacific Rim Conference on Lasers and Electro-Optics (CLEO-PR) 2018 (Hong Kong, China, July 29-Aug. 09, 2018).
Ung, Bora.
5 mars 2018.
« Des capteurs optiques de biomatériaux et des polluants de l’air ».
[Article de recherche]. Substance ÉTS.
Ung, Bora.
25 janvier 2018.
« Fibres optiques spéciales et faisceaux annulaires, de nouveaux outils ».
[Article de recherche]. Substance ÉTS.
Ungan, Erdir, Hammond, Colin et Abran, Alain.
2018.
« Automated COSMIC measurement and requirement quality improvement through ScopeMaster® tool ».
In Proceedings of the Academic Papers at IWSM Mensura 2018 "COSMIC Function Points - Fundamentals for Software Effort Estimation" held in conjunction with The China Software Cost Measurement Conference (CSCM 2018) (Beijing, China, Sept. 19-20, 2018)
Coll. « CEUR Workshop Proceedings », vol. 2207.
CEUR-WS.
Ungan, Erdir, Trudel, Sylvie et Abran, Alain.
2018.
« Analysis of the gap between initial estimated size and final (True) size of implemented software ».
In Proceedings of the Academic Papers at IWSM Mensura 2018 "COSMIC Function Points - Fundamentals for Software Effort Estimation" held in conjunction with The China Software Cost Measurement Conference (CSCM 2018) (Beijing, China, Sept. 19-20, 2018)
Coll. « CEUR Workshop Proceedings », vol. 2207.
pp. 123-137.
CEUR-WS.
Vahedi, Hani, Dehghanzadeh, Ahmad et Al-Haddad, Kamal.
2018.
« Static VAr compensator using packed U-cell based multilevel converter ».
In IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG) (Doha, Qatar, Apr. 10-12, 2018)
Piscataway, NJ, USA : IEEE.
Vahedi, Hani, Sharifzadeh, Mohammad et Al-Haddad, Kamal.
2018.
« Modified seven-level Pack U-Cell inverter for photovoltaic applications ».
IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 6, nº 3.
pp. 1508-1516.
Vahedi, Hani, Shojaei, Ali Asghar, Dessaint, Louis- A. et Al-Haddad, Kamal.
2018.
« Reduced DC link voltage active power filter using modified PUC5 converter ».
IEEE Transactions on Power Electronics, vol. 33, nº 2.
pp. 943-947. Vaillancourt, Michel. 2018. « Incorporation du verre postconsommation dans les chaussées ». Communication lors de la conférence : Congrès Infra 2018 (Québec, QC, Canada, 19-21 nov. 2018). Vaillancourt, Michel, Perraton, Daniel et Carter, Alain. 2018. « Overview of the research program on recycling glass aggregate in asphalt pavement structure underway at the LCMB ». Communication lors de la conférence : RILEM Cluster F-TCs Annual Meeting : RILEM Technical Committees and TGs Meetings Program (Braunschweig, Germany, Sept. 19-21, 2018).
Vakilinia, Shahin et Cheriet, Mohamed.
2018.
« Preemptive cloud resource allocation modeling of processing jobs ».
Journal of Supercomputing, vol. 74, nº 5.
pp. 2116-2150.
Vakilinia, Shahin, Vakilinia, Iman et Cheriet, Mohamed.
2018.
« Green process offloading in smart home ».
In IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, Qc, Canada, Oct. 09-13, 2017)
IEEE.
Valentin, Mathilde, Monfet, Danielle et Kajl, Stanislaw.
2018.
« Calibration bottom-up d'un système CVCA complexe à l'aide de données mesurées ».
In eSim 2018 (Montréal, QC, Canada, May 09-10, 2018)
Valverde Arrotéia, Aline, Paes, Daniel, Irizarry, Javier et Burrattino Melhado, Silvio.
2018.
« A comparative diagnosis of students’ proficiency in BIM in construction-related graduate programs in Brazil and in the United States ».
In XXII Congresso Internacional da Sociedade Iberoamericana de Gráfica Digital (São Carlos, Brazil, Nov. 07-09, 2018)
Coll. « Blucher Design Proceedings »
pp. 991-996.
São Paulo : Blucher.
Vanderesse, N., Larregain, B., Bridier, F. et Bocher, P..
2018.
« Experimental assessment of high heating rates in induction heating with temperature-sensitive lacquers ».
Journal of Materials Engineering and Performance, vol. 27, nº 8.
pp. 3831-3843.
Vanderesse, N., Richter, A., Nuño, N. et Bocher, P..
2018.
« Measurement of deformation heterogeneities in additive manufactured lattice materials by Digital Image Correlation: Strain maps analysis and reliability assessment ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 86.
pp. 397-408.
Varadharajan, Vivek Shankar, St-Onge, David, Gub, Christian et Beltrame, Giovanni.
2018.
« Over-the-air updates for robotic swarms ».
IEEE Software, vol. 35, nº 2.
pp. 44-50.
Veditti, Tony, Tran, Nguyen Duy Phuong et Ngo, Anh Dung.
2018.
« Dynamic fuzzy safety analysis of an industrial system ».
In AHFE 2017 International Conference on Safety Management and Human Factors, 2017, July 17, 2017 - July 21, 2017 (Los Angeles, CA, USA, July 17-21, 2017)
Coll. « Advances in Intelligent Systems and Computing », vol. 604.
pp. 465-471.
Springer Verlag.
VelezMarquez, Maria Isabel, Raymond, Jasmin, Blessent, Daniela, Philippe, Mikael, Simon, Nataline, Bour, Olivier et Lamarche, Louis.
2018.
« Distributed thermal response tests using a heating cable and fiber optic temperature sensing ».
Energies, vol. 11, nº 11.
Venditti, Tony, Tran, Nguyen Duy Phuong et Ngo, Anh Dung.
2018.
« System safety analysis of an industrial process using fuzzy methodology ».
In 4th International Conference on Fuzzy Systems and Data Mining (FSDM 2018) (Bangkok, Thailand, Nov. 15-16, 2018)
Coll. « Frontiers in Artificial Intelligence and Applications », vol. 309.
pp. 108-121.
IOS Press.
Verma, Anjeet, Singh, Bhim, Chandra, Ambrish et Al-Haddad, Kamal.
2018.
« An implementation of solar PV array based multifunctional EV charger ».
In IEEE Transportation and Electrification Conference and Expo (ITEC) (Long Beach, CA, USA, June 13-15, 2018)
pp. 372-379.
IEEE. Viallet, Guilhem et Voix, Jérémie. 2018. « Numerical modeling of the ear canal: benefits and challenges ». Communication lors de la conférence : National Hearing Conservation Association Annual Conference 2018 (Orlando, FL, USA, Feb. 15-17, 2018).
Vijeh, Mahdi, Samadaei, Emad, Rezanejad, Mohammad, Vahedi, Hani et Al-Haddad, Kamal.
2018.
« A new asymmetrical cascaded multilevel inverter with reduced number of components ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 4429-4433.
IEEE.
Vinches, Ludwig et Hallé, Stéphane.
2018.
« Effects of size and morphology of TiO2 and SiO2 airborne nanoparticles on their filtration through chemical protective clothing ».
International Journal of Theoretical and Applied Nanotechnology, vol. 6.
pp. 11-20.
Voix, Jérémie.
2018.
« Hearing protector fit-testing and the new ANSI S12.71 standard ».
In 25th International Congress on Sound and Vibration (ICSV) : Hiroshima Calling (Hiroshima, Japan, July 08-12, 2018)
pp. 2392-2399.
International Institute of Acoustics and Vibration.
Voix, Jeremie et Dumoulin, Romain.
2018.
« Inciting our children to turn their music down: The AYE concept ».
Journal of the Acoustical Society of America, vol. 144, nº 3.
p. 1929.
Voix, Jérémie, Dumoulin, Romain et Levesque, Julia.
2018.
« Inciting our children to turn their music down: the AYE concept proposal ».
Canadian Acoustics = Acoustique Canadienne, vol. 46, nº 4.
pp. 14-15. Voix, Jérémie, Laperle, Jean-Nicolas, Mazur, Jakub et Bernier, Antoine (inventeurs) 9 octobre 2018. « Advanced communication earpiece device and method ». EERS Global Technologies Inc. (titulaire(s)). Brevet américain US 10,097,149.
Vuppala, Satyanarayana et Kaddoum, Georges.
2018.
« Secrecy capacity analysis in D2D underlay cellular networks: Colluding eavesdroppers ».
In IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 08-13, 2017)
IEEE.
Vuppala, Satyanarayana, Tolossa, Yohannes Jote, Kaddoum, Georges et Abreu, Giuseppe.
2018.
« On the physical layer security analysis of hybrid millimeter wave networks ».
IEEE Transactions on Communications, vol. 66, nº 3.
pp. 1139-1152. Wallin, Maria, Ekstrøm, Kai Erik, Moosavi-Khoonsari, Elmira et Tranell, Gabriella. 2018. « Formation of MnFe alloy by melting siliconmanganese sludge with iron scrap ». Communication lors de la conférence : Extraction 2018 : First Global Conference on Extractive Metallurgy (Ottawa, ON, Canada, Aug. 26-29, 2018).
Walmsley, Felipe N., Cavalcanti, George D. C., Oliveira, Dayvid V. R., Cruz, Rafael M. O. et Sabourin, Robert.
2018.
« An ensemble generation method based on instance hardness ».
In 2018 International Joint Conference on Neural Networks (IJCNN) (Rio de Janeiro, Brazil, July 08-13, 2018)
Piscataway, NJ, USA : IEEE.
Wang, Qingsong et Niu, Shuangxia.
2018.
« Design, modeling, and control of a novel hybrid-excited flux-bidirectional-modulated generator-based wind power generation system ».
IEEE Transactions on Power Electronics, vol. 33, nº 4.
pp. 3086-3096.
Wang, Qingsong, Niu, Shuangxia et Ching, T. W..
2018.
« A new double-winding vernier permanent magnet wind power generator for hybrid AC/DC microgrid application ».
IEEE Transactions on Magnetics, vol. 54, nº 11.
Wang, Qingsong, Niu, Shuangxia et Yang, Lin.
2018.
« Design optimization of a novel scale-down hybrid-excited dual permanent magnet generator for direct-drive wind power application ».
IEEE Transactions on Magnetics, vol. 54, nº 3.
Wang, Qingsong et Shuangxia, Niu.
2018.
« A novel DC-coil-free hybrid-excited machine with consequent-pole PM rotor ».
Energies, vol. 11, nº 4.
Wang, Wei, Liu, Huaiju, Zhu, Caichao, Bocher, Philippe, Liu, Heli et Sun, Zhangdong.
2018.
« Evaluation of rolling contact fatigue of a carburized wind turbine gear considering the residual stress and hardness gradient ».
Journal of Tribology, vol. 140, nº 6.
Wang, Yu-Hsuan, Song, Pengfei, Li, Xiao, Ru, Changhai, Ferrari, Giovanni, Balasubramanian, Prabakaran, Amabili, Marco, Sun, Yu et Liu, Xinyu.
2018.
« A paper-based piezoelectric accelerometer ».
Micromachines, vol. 9, nº 1.
Wei, Qiliang, Yang, Xiaohua, Zhang, Gaixia, Wang, Dongniu, Zuin, Lucia, Banham, Dustin, Yang, Lijun, Ye, Siyu, Wang, Youling, Mohamedi, Mohamed et Sun, Shuhui.
2018.
« An active and robust Si-Fe/N/C catalyst derived from waste reed for oxygen reduction ».
Applied Catalysis B: Environmental, vol. 237.
pp. 85-93.
Wei, Qiliang, Zhang, Gaixia, Yang, Xiaohua, Fu, Yanqing, Yang, Guanhua, Chen, Ning, Chen, Weifeng et Sun, Shuhui.
2018.
« Litchi-like porous Fe/N/C spheres with atomically dispersed FeN: X promoted by sulfur as highly efficient oxygen electrocatalysts for Zn-air batteries ».
Journal of Materials Chemistry A, vol. 6, nº 11.
pp. 4605-4610.
Wiggers, Kelly L., Britto, Alceu S., Heutte, Laurent, Koerich, Alessandro L. et Oliveira, Luiz Eduardo S..
2018.
« Document image retrieval using deep features ».
In 2018 International Joint Conference on Neural Networks (IJCNN 2018) (Rio de Janeiro, Brazil, July 08-13, 2018)
Piscataway, NJ, USA : IEEE. Wingert, L., Cloutier, Y., Hallé, S. et Tuduri, L.. 2018. « Effective density determination for workplace real-time monitoring of ultrafine aerosols using an ELPI+ ». Communication lors de la conférence : 10th Aerosol Conference (IAC) (St. Louis, MO, USA, Sept. 2-7, 2018). Wingert, L., Hallé, S., Cloutier, Y. et Tuduri, L.. 2018. « Méthode d’estimation sur les lieux de travail de la densité effective pour l’échantillonnage en temps réel des particules ultrafines avec un ELPI+ ». Communication lors de la conférence : 40e Congrès Annuel de l'AQHSST (Saguenay, QC, Canada, 16-18 mai, 2018). Wingert, L., Tuduri, L., Cloutier, Y., Hallé, S., Bahloul, A., Tessier, D., Giraudel, J.-L., Dolez, P. et Yip, P.. 2018. « Filtration performances study of porous media composing protective clothing against solid aerosols ». Communication lors de la conférence : 10th Aerosol Conference (IAC) (St. Louis, MO, USA, Sept. 2-7, 2018). Wood, Raul R., Martel, Jean-Luc, Trentini, Fabian, Leduc, Martin, Frigon, Anne, Willkofer, Florian et Ludwig, Ralf. 2018. « Analyzing natural variability and future changes of precipitation extremes in the new ClimEx single-model large-ensemble ». Communication lors de la conférence : 20th EGU General Assembly (Vienna, Austria, Apr. 04-13, 2018).
Woods, John S., Damiani, Mattia, Fantke, Peter, Henderson, Andrew D., Johnston, John M., Bare, Jane, Sala, Serenella, Maia de Souza, Danielle, Pfister, Stephan, Posthuma, Leo, Rosenbaum, Ralph K. et Verones, Francesca.
2018.
« Ecosystem quality in LCIA: Status quo, harmonization, and suggestions for the way forward ».
International Journal of Life Cycle Assessment, vol. 23, nº 10.
pp. 1995-2006.
Wu, Hao, Sanjosé, Marlène, Moreau, Stéphane et Sandberg, Richard D..
2018.
« Direct numerical simulation of the self-noise radiated by the installed controlled-diffusion airfoil at transitional reynolds number ».
In 2018 AIAA/CEAS Aeroacoustics Conference (Atlanta, GA, USA, June 25-29, 2018)
Coll. « AIAA Paper », vol. AIAA 2018-3797.
American Institute of Aeronautics and Astronautics.
Wu, Mingjie, Wei, Qiliang, Zhang, Gaixia, Qiao, Jinli, Wu, Mingxing, Zhang, Jihai, Gong, Qiaojuan et Sun, Shuhui.
2018.
« Fe/Co double hydroxide/oxide nanoparticles on N-Doped CNTs as highly efficient electrocatalyst for rechargeable liquid and quasi-solid-state zinc–air batteries ».
Advanced Energy Materials, vol. 8, nº 30.
Xiao, Ke, Dai, Shun, Rutagemwa, Humphrey, Rong, Bo, Gong, Liang et Kadoch, Michel.
2018.
« A novel opportunistic NOMA scheme for 5G massive MIMO multicast communications ».
In 86th IEEE Vehicular Technology Conference (VTC-Fall) (Toronto, ON, Canada, Sept. 24-27, 2017)
IEEE.
Xiao, Ke, Gong, Liang et Kadoch, Michel.
2018.
« Opportunistic Multicast NOMA with security concerns in a 5G massive MIMO system ».
IEEE Communications Magazine, vol. 56, nº 3.
pp. 91-95.
Xiao, Ke, Kadoch, Michel, Rutagemwa, Humphrey et Li, Chen.
2018.
« Opportunistic NOMA-based massive MIMO precoding for 5G new radio ».
Wireless Communications and Mobile Computing, vol. 2018.
Xiao, Ke, Li, Wei, Kadoch, Michel et Li, Chen.
2018.
« On the secrecy capacity of 5G MmWave small cell networks ».
IEEE Wireless Communications, vol. 25, nº 4.
pp. 47-51.
Xiao, Yiming, Drouin, Simon, Gerard, Ian J., Fonov, Vladimir, Aubert-Broche, Bérengère, Ma, Yuhan, Kersten-Oertel, Marta, Tampieri, Donatella et Collins, D. Louis.
2018.
« An augmented-reality system prototype for guiding transcranial Doppler ultrasound examination ».
Multimedia Tools and Applications, vol. 77, nº 21.
pp. 27789-27805.
Xu, Jin, Dziong, Zbigniew et Cabani, Adnane.
2018.
« Simultaneous temperature sensing using distributed cascading fiber Bragg grating-based single-ended Brillouin optical time-domain analyzer ».
Laser Physics, vol. 28, nº 12.
Yamashita, Aiko, Petrillo, Fabio, Khomh, Foutse et Guéhéneuc, Yann-Gaël.
2018.
« Developer interaction traces backed by IDE screen recordings from think aloud sessions ».
In International Conference on Software Engineering (Gothenburg, Sweden, May 28-29, 2018)
pp. 50-53.
IEEE Computer Society.
Yu, Meng, Wei, Qiliang, Wu, Mingjie, Wu, Jie, Liu, Jieyu, Zhang, Gaixia, Sun, Shuhui et Wang, Weichao.
2018.
« Morphology controlled synthesis of SmMn2O5 nanocrystals via a surfactant-free route for Zn-air batteries ».
Journal of Power Sources, vol. 396.
pp. 754-763.
Yu, Shuai, Langar, Rami, Fu, Xiaoming, Wang, Li et Han, Zhu.
2018.
« Computation offloading with data caching enhancement for mobile edge computing ».
IEEE Transactions on Vehicular Technology, vol. 67, nº 11.
pp. 11098-11112.
Zaabar, I., Beauregard, Y. et Paquet, M..
2018.
« Using multicriteria decision making methods to manage systems obsolescence ».
In 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Bangkok, Thailand, Dec. 16-19, 2018)
pp. 803-807.
IEEE.
Zadi, Tahar, Assadi, Aymen Amine, Nasrallah, Noureddine, Bouallouche, Rachida, Nguyen-Tri, Phuong, Bouzaza, Abdelkrim, Azizi, Mohamed Miftah, Maachi, Rachida et Wolbert, Dominique.
2018.
« Treatment of hospital indoor air by a hybrid system of combined plasma with photocatalysis: case of trichloromethane ».
Chemical Engineering Journal, vol. 349.
pp. 276-286.
Zaidi, Slim, Azzakhmam, Mourad, Affes, Sofiène, Despins, Charles, Zarifi, Keyvan et Zhu, Peiying.
2018.
« Graph-optimized progressive hybrid greyfield wireless access virtualization ».
In IEEE 17th International Conference on Ubiquitous Wireless Broadband (ICUWB) (Salamanca, Spain, Sept. 12-15, 2017)
Institute of Electrical and Electronics Engineers Inc..
Zeighami, A., Aissaoui, R. et Dumas, R..
2018.
« Knee medial and lateral contact forces in a musculoskeletal model with subject-specific contact point trajectories ».
Journal of Biomechanics, vol. 69.
pp. 138-145.
Zellagui, Soumia, Tibermacine, Chouki, El Boussaidi, Ghizlane, Seriai, Abdelhak-Djamel, Bouziane, Hinde-Lilia et Dony, Christophe.
2018.
« Recovering runtime architecture models and managing their complexity using dynamic information and composite structures ».
In 33rd Annual ACM Symposium on Applied Computing (SAC 2018) (Pau, France, Apr. 09-13, 2018)
pp. 1454-1456.
Zemzem, M., Vinches, L. et Hallé, S.. 2018. « Processing parameter effect on barrier properties of nitrile based nanocomposite membrane ». Communication lors de la conférence : ANTEC® The Plastics Technology Conference, Society of Plastics Engineers (Orlando, FL, USA, May 7-10, 2018).
Zemzem, Mohamed, Vinches, Ludwig et Hallé, Stéphane.
2018.
« Processing parameters effect on barrier properties of nitrile based nanocomposite membrane ».
In 2018 Society of Plastics Engineers Annual Technical Conference (ANTEC) (Orlando, FL, USA, May 07-11, 2018)
Coll. « Annual Technical Conference - ANTEC, Conference Proceedings »
Society of Plastics Engineers.
Zergane, Saïd, Smaili, Arezki et Masson, Christian.
2018.
« Optimization of wind turbine placement in a wind farm using a new pseudo-random number generation method ».
Renewable Energy, vol. 125.
pp. 166-171.
Zgheib, Rawad, Al-Haddad, K. et Kamwa, I..
2018.
« Adaptive control of a three-phase dual active bridge based for electric vehicles charging ».
In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (Washington, DC, USA, Oct. 21-23, 2018)
pp. 5141-5146.
IEEE.
Zgheib, Rawad, Al-Haddad, Kamal et Kamwa, Innocent.
2018.
« Closed-form modulation of a dual-active-bridge based capacitorless charger for electric vehicles ».
In 2018 IEEE Vehicle Power and Propulsion Conference (VPPC) (Chicago, IL, USA, Aug. 27-30, 2018)
Piscataway, NJ, USA : IEEE.
Zgolli, Fatma, Henni, Khadidja, Haddad, Rim, Mitiche, Amar, Ouakrim, Youssef, Hagemeister, Nicola, Vendittoli, Pascal- André, Fuentes, Alexandre et Mezghani, Neila.
2018.
« Kinematic data clustering for healthy knee gait characterization ».
In 2018 IEEE Life Sciences Conference (LSC) (Montreal, QC, Canada, Oct. 28-30, 2018)
pp. 239-242.
IEEE.
Zhang, C., Shahriari, D., Loucif, A., Melkonyan, H. et Jahazi, M..
2018.
« Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ».
International Journal of Advanced Manufacturing Technology, vol. 99, nº 9-12.
pp. 3035-3048.
Zhang, Chaofan, Sanjosé, Marlène et Moreau, Stéphane.
2018.
« Improvement of the near wall treatment in Large Eddy Simulation for aeroacoustic applications ».
In 24th AIAA/CEAS Aeroacoustics Conference (Atlanta, GA, USA, June 25-29, 2018)
Coll. « AIAA Paper », vol. AIAA 2018-3795.
American Institute of Aeronautics and Astronautics.
Zhang, Chaofan, Sanjosé, Marlène et Moreau, Stéphane.
2018.
« Wall-modeled Large Eddy Simulation with adverse pressure gradients: application to bluff bodies ».
In 26th Annual Conference of the Computational Fluid Dynamics Society of Canada (Winnipeg, Canada, June 10-12, 2018)
Zhang, Chunping, Loucif, Abdelhalim, Jahazi, Mohammad, Tremblay, Rami et Lapierre, Louis-Philippe.
2018.
« On the effect of filling rate on positive macrosegregation patterns in large size cast steel ingots ».
Applied Sciences, vol. 8, nº 10.
Zhang, Gaixia, Norouzi Banis, Mohammad, Wei, Qiliang, Cai, Mei, Zhang, Yong, Li, Ruying, Sun, Shuhui et Sun, Xueliang.
2018.
« Pt/TiSix-NCNT novel janus nanostructure: A new type of high-performance electrocatalyst ».
ACS Applied Materials and Interfaces, vol. 10, nº 13.
pp. 10771-10777.
Zhang, K. et Kummert, M..
2018.
« Potential of building thermal mass for energy flexibility in residential buildings: a sensitivity analysis ».
In 10th Conference of IBPSA-Canada (Montreal, QC, Canada, May 09-10, 2018)
pp. 163-172.
International Building Performance Simulation Association.
Zhang, Kaiwen et Jacobsen, Hans-Arno.
2018.
« Towards dependable, scalable, and pervasive distributed ledgers with blockchains ».
In 2018 IEEE 38th International Conference on Distributed Computing Systems (ICDCS) (Vienna, Austria, July 2-6, 2018)
pp. 1337-1346.
IEEE.
Zhang, Kaiwen, Vitenberg, Roman et Jacobsen, Hans-Arno.
2018.
« Deconstructing blockchains: Concepts, systems, and insights ».
In DEBS 2018 - Proceedings of the 12th ACM International Conference on Distributed and Event-based Systems (Hamilton, New Zealand, June 25-29, 2018)
pp. 187-190.
New-York, NY, USA : ACM. Zhang, Kun. 2018. « Model predictive control of building systems for energy flexibility ». Thèse de doctorat. École Polytechnique de Montréal, 148 p.
Zhang, Mingli et Desrosiers, Christian.
2018.
« Structure preserving image denoising based on low-rank reconstruction and gradient histograms ».
Computer Vision and Image Understanding, vol. 171.
pp. 48-60.
Zhang, Mingli, Desrosiers, Christian et Zhang, Caiming.
2018.
« Atlas-based reconstruction of high performance brain MR data ».
Pattern Recognition, vol. 76.
pp. 549-559. Zhang, W., Pham Van Bang, D., Bai, X., Uh Zapata, M. et Nguyen, K. D.. 2018. « 3D free surface non-hydrostatic flows around a vertical pile ». Communication lors de la conférence : 6th International Conference on Estuaries and Coasts (Caen, France, Aug. 20-23, 2018).
Zhang, Yuliang Matthew, Izquierdo, Ricardo et Xiao, Shuyong Steven.
2018.
« Printing of flexible, large-area organic photovoltaic cells ».
In 2018 International Flexible Electronics Technology Conference (IFETC) (Ottawa, ON, Canada, Aug. 7-9, 2018)
Institute of Electrical and Electronics Engineers Inc.. Zhani, Mohamed Faten. 2018. « "Network service chains" as a service – deployment and research challenges ». Communication lors de la conférence : IEEE International Workshop on Emerging Trends in Softwarized Networks (ETSN 2018) co-located with IEEE Conference on Network and Softwarization 2018 (Montreal, QC, Canada, June 25, 2018). Zhani, Mohamed Faten. 2018. « Rethinking the network architecture and protocols for the tactile internet ». Communication lors de la conférence : 1st International Workshop on High-Precision Networks Operations and Control (HiPNet 2018) co-located with the 14th International Conference on Network and Service Management (CNSM 2018) (Rome, Italy, Nov. 9, 2018).
Zhao, Yan, Al Hadi, Richard, Lu, Hsin-Chia, Tseng, Tzu-Shiuan, Zhang, Yan, Qiao, Weikang, Lo, Michael Kevin, Jou, Chewn-Pu, Zhang, Kevin et Chang, Mau-Chung Frank.
2018.
« A 0.55THz Y-vector network configured beam steering phased array in CMOS technology ».
In IEEE MTT-S International Microwave Symposium Digest (Philadelphia, PA, USA, June 10-15, 2018)
pp. 587-590.
Institute of Electrical and Electronics Engineers Inc..
Zheng, Lijun, Zheng, Shizheng, Zhu, Zhengyou, Xu, Qiaoling, Zhang, Gaixia, Sun, Shuhui et Yang, Dachi.
2018.
« Photochemical synthesis of radiate titanium oxide microrods arrays supporting platinum nanoparticles for photoassisted electrooxidation of methanol ».
Advanced Materials Interfaces, vol. 5, nº 21.
Zhu, Linbo B., Bouzid, Abdel-Hakim, Hong, Jun et Zhang, Zaoxiao.
2018.
« Elastic interaction in bolted flange joints: An analytical model to predict and optimize bolt load ».
Journal of Pressure Vessel Technology, vol. 140, nº 4.
p. 10.
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2018.
« Analytical evaluation of elastic interaction in bolted flange joints ».
International Journal of Pressure Vessels and Piping, vol. 165.
pp. 176-184.
Zhu, Linbo, Hou, Yifei, Bouzid, Abdel-Hakim et Hong, Jun.
2018.
« On the design of contact member surface shape of bolted joints to minimize clamping load loss ».
In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Zhu, M., Pérez Arroyo, C., Fosso Pouangué, A., Sanjosé, M. et Moreau, S..
2018.
« Isothermal and heated subsonic jet noise using large eddy simulations on unstructured grids ».
Computers and Fluids, vol. 171.
pp. 166-192.
Zhu, Tao, Lallier-Daniels, Dominic, Sanjosé, Marlène, Moreau, Stéphane et Carolus, Thomas.
2018.
« Rotating coherent flow structures as a source for narrowband tip clearance noise from axial fans ».
Journal of Sound and Vibration, vol. 417.
pp. 198-215. Zhuldybina, M., Ropangol, X., Trudeau, C., Bolduc, M., Zednik, R. J. et Blanchard, F.. 2018. « THz-characterization of printed vortex phase plate ». Affiche présentée lors de la conférence : The 2nd International conference on advanced materials and processes for environnement, energy and health (iCAMP) (Montreal, QC, Canada, Oct. 31 - Nov. 2, 2018).
Zhuldybina, M., Trudeau, C., Ropagnol, X., Bolduc, M., Zednik, R. J. et Blanchard, F..
2018.
« Terahertz vortex phase plate from a printed electronic device ».
In 2018 Photonics North Conference (PN) (Montreal, QC, Canada, June 5-7, 2018)
IEEE.
Ziabakhsh, Soheyl, Gagnon, Ghyslain et Roberts, Gordon W..
2018.
« An all-digital high-resolution programmable time-difference amplifier based on time latch ».
In 2018 IEEE International Symposium on Circuits and Systems (ISCAS) (Florence, Italy, May 27-30, 2018)
IEEE.
Ziabakhsh, Soheyl, Gagnon, Ghyslain et Roberts, Gordon W..
2018.
« The peak-SNR performances of voltage-mode versus time-mode circuits ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 65, nº 12.
pp. 1869-1873. Ziadi, Tewfik, Lopez-Herrejon, Roberto E., Acher, Mathieu et Martinez, Jabier. 2018. « REVE 2018: 6th international workshop on reverse variability engineering ». Communication lors de la conférence : ACM International Conference Proceeding Series (Gothenburg, Sweden, Sept. 10-14, 2018).
Ziaei Nafchi, Hossein et Cheriet, Mohamed.
2018.
« Efficient no-reference quality assessment and classification model for contrast distorted images ».
IEEE Transactions on Broadcasting, vol. 64, nº 2.
pp. 518-523.
Ziko, Imtiaz Masud, Granger, Eric et Ben Ayed, Ismail.
2018.
« Scalable Laplacian K-modes ».
In Advances in Neural Information Processing Systems 31 (NeurIPS 2018) (Montreal, QC, Canada, Dec. 02-08, 2018)
pp. 10041-10051.
La Jolla : Neural Information Processing Systems (NIPS).
Zokagoa, Jean-Marie et Soulaimani, Azzeddine.
2018.
« A POD-based reduced-order model for uncertainty analyses in shallow water flows ».
International Journal of Computational Fluid Dynamics, vol. 32, nº 6-7.
pp. 278-292.
Zongo, Floriane, Tahan, Antoine, Aidibe, Ali et Brailovski, Vladimir.
2018.
« Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
Zumer, Raphaël et Ratté, Sylvie.
2018.
« Color-independent classification of animation video ».
International Journal of Multimedia Information Retrieval, vol. 7, nº 3.
pp. 187-196. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau